Retaining wall in Trstena Bypass, district Tvrdošín in Slovakia

Retaining wall in Trstena Bypass, district Tvrdošín in Slovakia

PROJECT SHOWCASE
1/3
RETAINING WALLS IN
TRSTENA BYPASS, SLOVAKIA
Location:
Trstená - district Tvrdošín in Slovakia
Date:
2009
Product:
TENAX T-BLOCK system
Designer:
CEMOS projektová kancelária s.r.o. ,
Bratislava
Contractor:
“Združenie Trstená R3”
acting on behalf of the main contractor
VÁHOSTAV – SK,
a.s., Hlinská 40, 011 18 Žilina
Client:
Národná Dial’niĉná Spoloĉnost’, a.s.
(National freeway company)
Distributor:
Jarmila Pietri Hoflansova
PROJECT DESCRIPTION
The project concerns expressway R3, section Trstená by-pass in total
length of 9.8km on E77 transition route from Poland via Orava Region
down to the south.
The retaining walls were constructed as end of embankments at the
bridge earth fill supports for six bridges where they gradually turned
into sloping embankment wing walls with average heights ranging
between 4 and 14m.
Retaining walls exceeding height of 5m were designed as stepped.
The faces of the walls were vertical. Retaining walls under the bridge
structure were built on the bridge support foundations, while the wing
walls were constructed on their own strip foundations.
T-CLIP
connectors
Contractor (Združenie Trstená R3) – acting on behalf of the main
contractor VÁHOSTAV – SK, a.s. Žilina was choosing between three
systems for the construction of reinforced earth structures and decided
to use a combination of mono-oriented Tenax geogrids and T-BLOCK
concrete blocks manufactured by VÁHOSTAV – SK – PREFA, s.r.o.
Horní Hriov. The geo-grids are anchored between two T-BLOCK units
with the use of T-Clips locks. The dimensions of the blocks were 1000
x 500 x 300mm.
PROJECT SHOWCASE
2/3
RETAINING WALLS IN
TRSTENA BYPASS, SLOVAKIA
Mono-oriented geogrids layout at corners.
Installation phase of TENAX T-BLOCK system
Profile view of Vahostav’s blocks with connector “T-CLIP”
PROJECT SHOWCASE
3/3
RETAINING WALLS IN
TRSTENA BYPASS, SLOVAKIA
Final view of the Trstena T-BLOCK system retaining wall
SGS ITALY Certificate no. IT93/0008a
SGS U.K. Certificate no. IT93/2568.1
SGS ITALY Certificate no. IT93/0008a
SGS U.K. Certificate no. IT93/2568.1
SGS ITALY Certificate no. IT93/0008a
SGS U.K. Certificate no. IT93/2568.1
TENAX International B.V.
Viale Stefano Franscini 19 CH-6900 Lugano / SWIT ZERLAND
Tel. +41 91.9242485 - Fax +41 91.9242489
[email protected] - www.tenax.net
SGS ITALY Certificate n°IT93/0008.01
SGS U.K. Certificate n° IT93/2568.01
First release: 5.9.1994
I.T.C. is the Italian Body of UEAtc (Union Européenne
pour l’Agrément Technique dans la Construction).
The correspondent British Body is BBA
(British Board of Agreement), therefore the I.T.C.