Micro Machining Tooling

Transcription

Catalog 2090
Micro Machining Tooling
Micro-Machining
Productivity Solutions
Catalog 2090 is Kennametal’s response to customer demand for a single-source
for proven micro-machining solutions. This new catalog displays Kennametal’s
comprehensive line of micro-machining tooling solutions in one convenient resource.
Now, whether you’re turning, drilling, or milling, you’ll find world-class productivity
solutions for ALL your micro-machining and small turning center
applications at your finger tips.
KEY FEATURES:
•
•
•
KM® Micro ... the focus of Catalog 2090. This unique,
revolutionary quick-change tooling system is specially
designed to mount on Swiss-Style turning centers,
gang machines, and smaller lathes.
Our micro boring bar offering delivers bores as small
as .062”. Kennametal micro threading bars provide
threads as fine as 48 tpi while our micro grooving bars
accept standard .015” width inserts.
High-speed solid carbide Dynapoint® TF drills, with a triple flute, 130-degree point
design, are available in grade K10 and TiAlN-coated grade KC7210. These drills, ranging
from #33 to 1/2” diameter, are an excellent choice for machining aluminum, non-ferrous
materials, ductile or gray cast irons, and for titanium short-hole applications.
•
Solid carbide Dynapoint® SE drills, from 1/8” to 1/2” diameter, are
featured in grade CS5 and TiAlN-coated grade KC7215. The
patented SE point design defines reliability in high-speed,
heavy-feed drilling applications, and is ideal for
cutting plain carbon, alloy, and tool steel materials.
•
A complete line of high-performance solid carbide end
mills, ranging in size from 1/64” to 3/8”, is also available.
•
The KENNA PERFECT™ Tooling Selection System
will quickly direct you to the newest and best
Kennametal grades and geometries for your specific
micro-machining application.
•
The KENNA UNIVERSAL™ Turning Selection System
offers two new versatile grades, KC8050 and
KC5010, that are perfect for those short-run jobs
machining a wide variety of workpiece materials,
from interrupted roughing to finishing cuts.
Whatever your micro-machining
needs may be, Kennametal’s
Catalog 2090 puts high-performance,
optimal productivity solutions at
your finger tips in one convenient
catalog. For additional copies,
contact your nearest
Kennametal location.
For further assistance, see general index on page 295.
Machined medical parts appearing in the Micro Machining Tooling catalog cover photo
were provided courtesy of Sulzer Medica/Sulzer Dental Inc., and by Rose Training Systems.
2
www.kennametal.com
Table of Contents
page
Inserts . . . . . . . . . . . . . . . . . . . . . . . .
TM
4
KM Micro Quick-Change Tooling . . . . . .
139
OD Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
163
ID Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
185
Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
219
High-Performance Taps . . . . . . . . . . . . . . . . . . . . .
239
End Mills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
259
Toolholding Systems . . . . . . . . . . . . . . . . . . . . . . . .
271
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
295
Metalcutting Safety . . . . . . . . . . . . . . . . . . . . . .
299
3
KENNA PERFECT ™
A system of grades, geometries, and application
guidelines to provide optimal solutions for
your metalcutting needs.
Kennametal. The Metalcutting Authority.
4
Turning System
Now it’s easy to determine which Kennametal
chip-control cutting tools will work best in your
specific workpiece materials and applications!
by Geometry…
by Grade…
…and by looking at
the actual Insert!
1
2
3
3
APPLICATION:
FF (Fine Finishing)
F (Finishing)
M (Medium Machining)
R (Roughing)
HP (High Positive)
U (Universal)
EDGE CLASS:
N (Negative)
P (Positive)
S (Sharp)
H (Heavy Roughing)
4
5
COATING TYPE:
9 = CVD (Chemical Vapor Deposition)
5 = PVD (Physical Vapor Deposition)
8 = Universal
KENNA PERFECT
MATERIAL GROUP:
1 = Steel
2 = Stainless Steel
3 = Cast Iron
4 = Non-Ferrous
5 = High-Temp Alloy
6 = Hardened Material
0 = Universal Machining
NOSE RADIUS:
both ANSI and ISO
APPLICATION:
FF, FN, MN, RN, FP, MP, RP,
RH, or UN
WEAR/TOUGHNESS
ISO RANGE:
10 = Highly Wear Resistant
to
50 = Extremely Tough
GEOMETRY:
Roughing ∆∆
Medium Machining
Finishing
Fine Finishing
5
Turning, Boring,
and Profiling Inserts
page
Turning Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
KENNA PERFECT™ Wiper Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . .
10
KENNA UNIVERSAL Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
KENNA PERFECT Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
Insert Identification System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32
Kenloc Inserts — Lock Pin Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
Application Specific Inserts . . . . . . . . . . . . . . . . . . . . . 59
Top Notch Profiling Insert Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
60
Top Notch Profiling Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
63
Positive Profiling and Boring Inserts
Kendex Mini Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
64
Threading, Grooving,
and Cutoff Inserts
KM Micro Cutting Units
Kenloc Pin/Clamp Combination
Threading Inserts . . . . . . . . . . . . . . . . . . . . . . .
SCLC-F
65
Top Notch Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
66
LT — Laydown Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
77
Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
97
Top Notch Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
98
A3 Deep Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111
Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A2 Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
117
118
Backturning, Cutoff, Grooving, and Threading . . . . . . . . .
125
Micro Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
131
7
KENNA PERFECT Selection System
KENNA PERFECT, Kennametal’s 3-step cutting tool selection system, makes choosing and
applying the most productive tool as easy as 1, 2, 3.
Tool recommendations are based on six workpiece material groups, optimizing selection accuracy.
Example:
6 workpiece material groups
1st Step
Select the insert geometry
2nd Step
Select the grade
Example:
Page:
steel
24
Given:
depth of cut = .040
feed = .016
Unknown: insert geometry
Solution:
-MN
Given:
cutting conditions:
lightly interrupted cut
Geometry: -MN
Unknown: grade
Solution:
KC9125
3rd Step
Select the cutting speed
8
Given:
grade KC9125
cutting conditions
Unknown: cutting speed
Solution:
750 sfm
®
KENNA PERFECT Selection System
Steel
1st Step: Insert Geometry Selection
Stainless Steel
Cast Iron
Non-Ferrous
Negative Inserts
High-Temp Alloys
-RN
Roughing
Hardened Materials
-MN
Medium Machining
-MN
-FN
Finishing
-FF
Fine Finishing
2nd Step: Grade Selection
Insert Geometry
-FF
-FN
-MN
-RN
heavily interrupted cut
KC9110
KC9125
KC9040
KC9040
KC9110
KC9125
KC9125
KC9040
varying depth of cut,
casting or forging skin
KT315
KC9110
KC9125
KC9125
smooth cut,
pre-turned surface
KT315
KT315
KC9110
KC9110
Cutting Condition
3rd Step: Cutting Speed Selection
Speed - sfm (m/min)
Material
Grade
300
(90)
450
(135)
600
(180)
750
(225)
900
(275)
1050
(320)
1200
(360)
1350
(410)
1500
(460)
KT315
KC9110
steel
KC9125
KC9040
9
Wiper Inserts
Steel
Stainless Steel
Cast Iron
Hardened Materials
10
Three Ways to
Improve Your
Turning Operations!
Kennametal introduces three new geometries that are the
latest in state-of-the-art turning technology. Our new -RW
(Roughing Wiper), -MW (Medium Wiper), and -FW (Finishing
Wiper) inserts employ a modified corner radius design which
delivers a superior surface finish compared to conventional
inserts. This technology enables you to choose the metalcutting
benefit that’s most important to your application.
Double Productivity
Kennametal’s new wiper geometries enable you to double your current
feed rate and still achieve surface finishes comparable to conventional
inserts. You’ll also see equivalent or better tool life using the appropriate
KENNA PERFECT grade specifically designed for your workpiece material.
Better Workpiece Finish
These new wiper geometries will also give you a markedly improved
surface finish at your current machining
conditions. Under typical conditions,
you’ll see as much as a 250%
improvement in the workpiece surface
finish, all with inserts that meet your
corner radius specifications.
You choose! Either way, we’re
sure you’ll agree that the new wiper
geometries from Kennametal provide
an outstanding way to optimize your
turning operations. Please see the
accompanying information for
proper application guidelines.
Conventional
Turning Insert
doc ......0.050
feed ......0.012 ipr
speed ..1,100 sfm
finish ....160 Ra (µin.)
Kennametal Wiper
Technology –MW
doc ..........0.050
feed ........0.020 ipr
speed ......1,100 sfm
finish ......60 Ra (µin.)
11
KENNA PERFECT Negative Wipers — Steel
®
Carbon, Alloy, and Tool Steels up to 48 HRC
1st Step – Select the Insert Geometry
Negative Wiper Inserts
-MW
Medium Wiper
-FW
Finishing Wiper
2nd Step – Select the Grade
Insert Geometry
Cutting Condition
–FW
–MW
—
—
KC9110
KC9125
varying depth of cut, casting or forging skin
KT315
KC9110
smooth cut, pre-turned surface
KT315
KC9110
3rd Step – Select the Cutting Speed
Material
steel
Grade
300
(90)
450
(135)
600
(180)
Starting Conditions
1200
(360)
1350
(410)
1500
(460)
sfm
m/min
KT315
850
260
KC9110
800
240
KC9125
600
180
NOTE: For expert application guidance, see page 633 in Catalog 1010.
12
Speed - sfm (m/min)
750
900
1050
(225)
(275)
(320)
KENNA PERFECT Positive Wipers — Steel
Carbon, Alloy, and Tool Steels up to 48 HRC
Positive Wiper Inserts
-MW
Medium Wiper
-FW
Finishing Wiper
Insert Geometry
Cutting Condition
–FW
–MW
KC9225
KC9225
KC9315
KC9315
KT315
KT315
Material
steel
Grade
300
(100)
450
(150)
600
(200)
Speed - sfm (m/min)
750
900
1050
(250)
(300)
(350)
Starting Conditions
1200
(400)
1350
(450)
1500
(500)
sfm
m/min
KT315
850
260
KC9315
800
240
KC9225
600
180
13
KENNA PERFECT Negative Wipers — Stainless Steel
®
Austenitic Stainless Steels
Negative Wiper Inserts
-MW
Medium Wiper
-FW
Finishing Wiper
Insert Geometry
Cutting Condition
–FW
–MW
—
—
KC9225
KC9240
KC5010
KC9225
KT315
KC9225
Material
stainless
steel
Grade
300
(90)
450
(135)
Speed - sfm (m/min)
750
(225)
900
(275)
1050
(320)
1200
(360)
Starting Conditions
sfm
m/min
KT315
750
230
KC5010
600
180
KC9225
550
170
KC9240
450
135
14
600
(180)
KENNA PERFECT Positive Wipers — Stainless Steel
Positive Wiper Inserts
-MW
Medium Wiper
-FW
Finishing Wiper
Insert Geometry
Cutting Condition
–FW
–MW
KC9225
KC9225
KC5010
KC5010
KT315
KT315
Material
stainless
steel
Grade
300
(100)
450
(150)
600
(200)
Speed - sfm (m/min)
750
1050
900
(250)
(350)
(300)
Starting Conditions
1200
(400)
1350
(450)
1500
(500)
sfm
m/min
KT315
650
200
KC5010
600
180
KC9225
600
180
15
Negative Wiper Inserts — Application Technology
®
Surface Finish
Theoretical Surface Finish – Ra
µin. (µm)
insert
feed rate – ipr (mm/rev)
FW & MW
.008 .012 .016 .020 .024 .028 .032 .036 .040 .044 .048
(0,2) (0,3) (0,4) (0,5) (0,6) (0,7) (0,8) (0,9) (1) (1,1) (1,2)
14
30
50
(0,3) (0,75) (1,3)
3/8 IC
1/2 IC
—
3/4 + 1 IC
—
23 41
(0,6) (1)
—
—
80
(2)
—
—
—
63
91 120
(1,6) (2,2) (3)
160
(4)
200 250
(5) (6,2)
—
—
—
—
—
—
—
103 141 184 232 287 347 413
(2,6) (3,5) (4,6) (5,8) (7,2) (8,7) (10,3)
How it Works
Wiper Insert
Standard Insert
LEGEND
f – feed
r – corner radius
rw – wiper radius
Ra – surface finish
Corner Radius Configuration
CNMG and WNMG wiper inserts create
a true corner radius on the workpiece,
just as a standard insert does.
16
DNMG and TNMG wiper inserts do not provide
an exact corner radius on the workpiece. The
radius produced falls within a ±.0025 tolerance
band. (blue lines)
Negative Wiper Inserts — Application Technology
C and W Style Inserts
Kenloc Toolholders
surface with wiper effect
surface with standard insert edge
D and T Style Inserts
CN . . 80° corner
insert requires MCLN
5° reverse lead
angle toolholder
CN . . 100° corner
insert requires MCRN
15° lead angle toolholder
CN . . 100° corner
insert requires MCKN
15° lead angle toolholder
WN . . 80° corner insert
requires MWLN 5° reverse
lead angle toolholder
Kenloc Toolholders
surface finish with wiper effect
surface with designated insert nose radius
surface finish with .016 radius
DN . . 55° corner insert
requires MDJN 3° reverse
TN . . 60° corner insert
requires MTJN 3° reverse
Kenloc Toolholders
S Style Inserts
surface with standard insert edge
SN . . 90° corner insert
requires MSRN 15° lead
angle toolholder
SN . . 90° corner insert
requires MSKN 15° lead
angle toolholder
NOTE: The holder guidelines above also apply to ceramic/PCBN wiper inserts in similar insert shapes; i.e.: CNGA, CNGX, DNGA, etc.
17
Positive Wiper Inserts — Application Technology
®
Positive geometry wiper inserts offer the same advantages as
negative style inserts. See page 16 for additional information on
wiper technology. When compared to conventional inserts, feed
rates can be doubled while maintaining surface finish, or surface
finish can be improved by a multiple of 2.5 while maintaining productive feed rates.
-FW
-MW
Finishing Wiper
Medium
Machining Wiper
Surface Finish
Theoretical Surface Finish – Ra
µin. (µm)
CCMT and CPMT Inserts
insert
feed rate – ipr (mm/rev)
FW , MW
.002 .004 .006 .008 .010 .012 .014 .016 .018 .020
(0,05) (0,10) (0,15) (0,20) (0,25) (0,30) (0,35) (0,40) (0,45) (0,50)
1/4 IC
1
6
14
22
35
49
(0,03) (0,15) (0,35) (0,55) (0,90) (1,25)
3/8 IC
1
4
8
14
22
30
39
(0,02) (0,10) (0,20) (0,35) (0,55) (0,75) (1,00)
1/2 IC
1
2
6
10
16
24
31
39
51
63
(0,02) (0,06) (0,15) (0,25) (0,40) (0,60) (0,80) (1,00) (1,30) (1,60)
—
—
—
—
—
—
—
Required Toolholder
surface with designated insert
nose radius
C.MT 80° insert
requires SCL
5° reverse lead
toolholder
Corner Radius
C.MT wiper inserts create a true corner
radius on the workpiece,
just as standard inserts do.
C.MT 100° insert
requires SCKC
15° lead angle
toolholder
18
C.MT 100° insert
requires SCRC
15° lead angle
toolholder
PRESENTING
KENNA UNIVERSAL
…the NEW universal turning
system… from the world’s premier
metalcutting tooling solutions supplier!
Novel, patent-pending technology provides:
• unmatched performance on a variety of workpiece materials
• superior results in finishing through interrupted roughing cuts
-RN
Roughing
-MP
-MN
Medium
Machining
Medium
Machining
-FP
Finishing
Universal Turning Grades
• 2 Universal Turning Grades —
KC8050 and KC5010
• 4 Geometries:
-RN Roughing Negative
-MN Medium Negative
-MP Medium Positive
-FP Finishing Positive
• 4 Material Groups:
-Steel
-Stainless Steel
-Cast Iron
-High-Temp Alloys
KC8050
• The universal grade for roughing
and medium machining operations
• Available in four chipbreaker geometries:
-RN, -MN, -MP, and -FP
KC5010
• The universal grade for finishing
and medium machining
• Available in chipbreaker geometries
-FP and -MP
19
KENNA UNIVERSAL Negative Inserts
®
Geometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys
Negative Inserts
Medium Machining
-MN
-MP
Finishing
-FP
Insert Geometry
Cutting Condition
–FP
–MP
–MN
KC8050
—
KC8050
KC8050
—
KC8050
KC5010
KC8050
—
KC5010
KC5010
—
Material
Grade
170
(50)
330
(100)
490
(150)
Speed - sfm (m/min.)
655
820
(200)
(250)
Starting Conditions
980
(300)
1150
(350)
sfm
m/min
KC5010
650
200
KC8050
600
180
KC5010
600
180
KC8050
500
150
KC5010
800
240
KC8050
750
230
KC5010
220
65
KC8050
230
70
steel
stainless
steel
cast iron
high-temp
alloys
20
KENNA UNIVERSAL Positive Inserts
Geometries for Steel, Stainless Steel, Cast Iron, and High-Temp Alloys
Positive Inserts
Medium Machining
-MF
Finishing
-LF
Fine Finishing
-UF
Insert Geometry
Cutting Condition
–UF
–LF
–MF
KC5010
KC8050
KC8050
KC5010
KC8050
KC8050
KC5010
KC5010
KC8050
KC5010
KC5010
KC8050
Material
Grade
170
(50)
330
(100)
490
(150)
Speed - sfm (m/min.)
655
820
(200)
(250)
Starting Conditions
980
(300)
1150
(350)
sfm
m/min
KC5010
650
200
KC8050
600
180
KC5010
600
180
KC8050
500
150
KC5010
800
240
KC8050
750
230
KC5010
220
65
KC8050
230
70
steel
stainless
steel
cast iron
high-temp
alloys
21
KENNA PERFECT
Inserts
Steel
Stainless Steel
Cast Iron
Non-Ferrous
High-Temperature Alloys
Hardened Materials
22
• Kennametal’s easy
to use 3-step selection
system makes choosing
the most productive
cutting tool as easy as
one…two…three!
• The KENNA PERFECT
system is based on
six workpiece material
groups. Each group
contains materials with
similar machinability and
metallurgical properties.
• Based on your
metalcutting conditions,
KENNA PERFECT will
recommend the best
cutting tool material
(grade), insert geometry,
and starting speed
ensuring productivity
from the first chip to
the last.
23
KENNA PERFECT Negative Inserts — Steel
®
Carbon Alloy and Tool Steels up to 48 HRC
Negative Inserts
-MN
Medium Machining
-FN
Finishing
-FF
Fine Finishing
Insert Geometry
Cutting Condition
–FF
–FN
–MN
KC9110
KC9125
KC9040
KC9110
KC9125
KC9125
KT315
KC9110
KC9125
KT315
KT315
KC9110
Material
Grade
300
(90)
450
(135)
600
(180)
Speed - sfm (m/min)
750
900
1050
(225)
(275)
(320)
Starting Conditions
1200
(360)
1350
(410)
1500
(460)
sfm
m/min
KT315
850
260
KC9110
800
240
KC9125
600
180
KC9040
300
90
steel
24
KENNA PERFECT Positive Inserts — Steel
Carbon Alloy and Tool Steels up to 48 HRC
Positive Inserts
-MF
Medium Machining
-LF
Finishing
-11
Fine Finishing
-UF
Fine Finishing
Insert Geometry
Cutting Condition
-11/–UF
–LF
–MF
KC5010
KC9125
KC9240
KC5010
KC9125
KC9125
KT315
KC9110
KC9125
KT315
KT315
KC9110
Material
steel
Grade
300
(90)
450
(135)
600
(180)
Speed - sfm (m/min)
750
900
1050
(225)
(275)
(320)
Starting Conditions
1200
(360)
1350
(410)
1500
(460)
sfm
m/min
KT315
800
260
KC5010
700
215
KC9110
800
240
KC9125
600
180
KC9240
350
110
25
KENNA PERFECT Negative Inserts — Stainless Steel
®
Negative Inserts
-MP
Medium Machining
-FP
Finishing
-FF
Fine Finishing
Insert Geometry
Cutting Condition
–FF
–FP
–MP
KC5010
KC9225
KC9245
KC5010
KC9225
KC9240
KT315
KC5010
KC9225
KT315
KT315
KC5010
750
(225)
900
(275)
Material
stainless
steel
Grade
300
(90)
450
(135)
Starting Conditions
sfm
m/min
KT315
650
195
KC5010
600
180
KC9225
600
180
KC9240
450
135
KC9245
300
90
26
Speed - sfm (m/min)
600
(180)
KENNA PERFECT Positive Inserts — Stainless Steel
Positive Inserts
Medium Machining
-MF
Finishing
-LF
. . GT-LF
Fine Finishing
-11
-UF
Insert Geometry
Cutting Condition
–11/-UF
–LF
..GT-LF
–MF
KC5010
KC9240
KC5025
KC9240
KC5010
KC9225
KC5025
KC9240
KT315
KC5010
KC5010
KC9225
KT315
KT315
KC5010
KC9225
Material
stainless
steel
Grade
300
(90)
450
(135)
Speed - sfm (m/min)
600
(180)
750
(225)
900
(275)
Starting Conditions
sfm
m/min
KT315
650
195
KC5010
600
180
KC9225
600
180
KC9240
450
135
27
KENNA PERFECT Negative Inserts — Non-Ferrous
®
Negative Inserts
..MS
Roughing
..GP
Medium Machining
..MS-F (PCD)
Finishing
Insert Geometry
Cutting Condition
..MS-F (PCD)
..GP
..MS
—
KC5410
KC5410
KD100
KC5410
KC5410
KD100
KC5410
KC5410
KD100
KC5410
KC5410
low silicon aluminum alloys (hypoeutectic < 12.2% Si) and magnesium alloys
Material
Grade
800
(250)
1600
(500)
2400
(750)
3200
(1000)
Speed - sfm (m/min)
4000
4800
5600
(1250)
(1500)
(1750)
6400
(2000)
7200
(2250)
8000
(2500)
Starting Conditions
sfm
m/min
KC5410
1800
550
KD100
2500
765
non-ferrous
high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys
Material
non-ferrous
Grade
800
(250)
KD100
28
Speed - sfm (m/min)
1600
2400
(500)
(750)
3200
(1000)
Starting Conditions
sfm
m/min
1700
520
KENNA PERFECT Positive Inserts — Non-Ferrous
Positive Inserts
..GT-HP
Medium Machining
..GT-LF
Finishing
..GW-F (PCD)
Fine Finishing
Insert Geometry
Cutting Condition
..GW-F (PCD)
..GT-LF
..GT-HP
—
—
KC5410
KD100
KC5410
KC5410
KD100
KC5410
KC5410
KD100
KC5410
KC5410
low silicon aluminum alloys (hypoeutectic < 12.2% Si) and magnesium alloys
Material
Grade
800
(250)
1600
(500)
2400
(750)
3200
(1000)
Speed - sfm (m/min)
4000
4800
5600
(1250)
(1500)
(1750)
6400
(2000)
7200
(2250)
8000
(2500)
Starting Conditions
sfm
m/min
KC5410
1800
550
KD100
2500
765
non-ferrous
high silicon aluminum alloys (hypereutectic > 12.2% Si) and magnesium alloys
Material
non-ferrous
Grade
800
(250)
KD100
Speed - sfm (m/min)
1600
2400
(500)
(750)
3200
(1000)
Starting Conditions
sfm
m/min
1700
520
29
KENNA PERFECT Negative Inserts — High-Temp Alloys
®
Negative Inserts
..GP
Medium Machining
GG-LF
Finishing
Insert Geometry
Cutting Condition
GG-LF
..GP
—
—
KC5010
KC5010
KC5010
KC5010
KC5010
KC5010
Speed - sfm (m/min)
Material
Ni, Fe, and Co
based alloys
Material
Grade
50
(15)
150
(45)
350
(110)
KC5010
Grade
60
(20)
120
(44)
180
(55)
titanium and
KC5010
titanium alloys
30
Starting Conditions
250
(75)
Speed - sfm (m/min)
240
300
360
(75)
(90)
(110)
420
(130)
480
(150)
540
(165)
sfm
m/min
200
60
Starting Conditions
sfm
m/min
150
45
KENNA PERFECT Positive Inserts — High-Temp Alloys
Positive Inserts
-MF
Medium Machining
..GT-LF
Finishing
..GT-HP
Fine Finishing
Insert Geometry
Cutting Condition
..GT-HP
..GT-LF
-MF
—
KC5025
KC9240
KC5025
KC5025
KC9240
KC5010
KC5010
KC9240
K313
K313
KC5010
KC9225
Material
Ni, Fe, and
Co based
alloys
Material
titanium and
titanium
alloys
Grade
50
(15)
150
(45)
Speed - sfm (m/min)
250
(75)
Starting Conditions
350
(110)
sfm
m/min
K313
150
45
KC5010
200
60
KC5025
150
45
KC9225
180
55
KC9240
150
45
Grade
60
(15)
120
(40)
Speed - sfm (m/min)
180
(55)
Starting Conditions
240
(75)
300
(90)
sfm
m/min
K313
110
35
KC5010
175
55
KC5025
130
40
31
Turning and Boring Insert Identification System
symbol
shape
insert
nose angle
(degree)
shape
S
square
90
T
triangular
60
C
80
D
55
E
tolerances: apply prior to edge prep and coating
d: theoretical diameter of the insert inscribed circle
s : thickness
m : See figures below.
75
rhombic
(diamond)
F
50
M
86
V
35
W
trigon
80
H
hexagonal
120
O
octagonal
135
P
pentagonal
L
rectangular
90
85
parallelogramshaped
B
mm
inch
C
±.0010
±0,025
H
±.0005
±0,013
E
±.0010
G
±.0010
M
U
round
mm
inch
±.0005
±0,013
±.001
±0,025
±.0005
±0,013
±.001
±0,025
±0,025
±.0010
±0,025
±.001
±0,025
±0,025
±.0010
±0,025
±.005
±0,13
See tables at right.
±.005
±0,13
±.005
±0,13
—
1.
Insert Shape
METRIC INSERTS
C N M G
N—0°
A—3°
B—5°
C—7°
P—11°
D—15°
E—20°
F—25°
G—30°
INCH INSERTS
4.
Insert Type
5.
Insert Size
alternate symbols
shape of hole
N
R
without
F
A
M, P, S
T
Q
with
U
B
H
C
J
X
shape of insert’s
section
ordinary
system
without
N
single sided
R
double sided
F
without
A
cylindrical hole
single sided
M
double sided
G
partly cylindrical
hole, 40-60°
countersink
partly cylindrical
hole, 40-60°
double countersink
partly cylindrical
hole, 70-90°
countersink
partly cylindrical
hole, 70-90°
double countersink
without
A
single sided
M
G, P, Z
W
chipbreaker
without
A
double sided
G
without
A
single sided
M
without
A
double sided
G
special
X
IC less
than 1/4"*
E
D
X
*Inch system only.
NOTE:
Inch sizes in parenthesis for
“alternate symbols” D or E
(under 1/4 inch IC).
32
12 04 08
4 3 2
2.
Relief Angle
hole
mm
3.
Tolerance
55
R
tolerance on “s”
tolerance on “m”
inch
82
N/K
tolerance on “d”
tolerance
class
108
A
symbol
®
inch
1.2 (5)
1.5 (6)
1.8 (7)
—
2
2.5
—
3
—
3.5
—
4
4.5
5
—
5.5
6
—
7
—
8
10
—
metric cutting
edge length
IC
in
5/32
3/16
7/32
.236
1/4
5/16
.315
3/8
.394
7/16
.472
1/2
9/16
5/8
.630
11/16
3/4
.787
7/8
.984
1
1 1/4
1.260
mm
3,97
4,76
5,56
6,00
6,35
7,94
8,00
9,52
10,00
11,11
12,00
12,70
14,29
15,88
16,00
17,46
19,05
20,00
22,22
25,00
25,40
31,75
32,00
C
S4
04
05
—
06
08
—
09
—
11
—
12
14
16
—
17
19
—
22
—
25
32
—
D
04
05
06
—
07
09
—
11
—
13
—
15
17
19
—
21
23
—
27
—
31
38
—
R
03
04
05
06
06
07
08
09
10
11
12
12
14
15
16
17
19
20
22
25
25
31
32
S
03
04
05
—
06
07
—
09
—
11
—
12
14
15
—
17
19
—
22
—
25
31
—
T
06
08
09
—
11
13
—
16
—
19
—
22
24
27
—
30
33
—
38
—
44
54
—
V
—
08
09
—
11
13
—
16
—
19
—
22
24
27
—
30
33
—
38
—
44
54
—
W
—
S3
03
—
04
05
—
06
—
07
—
08
09
10
—
11
13
—
15
—
17
21
—
Turning and Boring Insert Identification System
± tolerance on “d”
class “M” tolerance
d
shapes
S, T, C, R, & W
shape“D”
inch
inch
mm
5/32
3,97
—
—
—
—
3/16
4,76
—
—
—
—
7/32
5,56
1/4
6,35
.002
0,05
.002
0,05
5/16
7,94
0,05
mm inch mm
inch
—
.003
class “U” tolerance
class “M” tolerance
d
shapes
S, T, C, R, & W
shapes “S, T, & C”
shape “V”
inch
.002
mm
± tolerance on “d”
class “U” tolerance
mm
inch
mm
—
5/32
3,97
—
—
—
—
3/16
4,76
—
—
—
—
7/32
5,56
—
—
1/4
6,35
5/16
7,94
0,06
inch
.003
mm
shape“D” shape “V”
inch mm
inch mm
0,06
.004
shapes “S, T, & C”
0,11
—
—
—
—
0,18
inch
mm
—
—
.005
0,13
3/8
9,52
3/8
9,52
.007
7/16
11,11
7/16
11,11
—
—
—
—
1/2
12,70
1/2
12,70
.010
0,25
.008
0,20
9/16
14,29
9/16
14,29
—
—
—
—
5/8
15,88
5/8
15,88
—
—
11/16
17,46
11/16
17,46
—
—
.011
0,27
3/4
19,05
3/4
19,05
—
—
.015
0,38
7/8
22,22
1
25,40
1 1/4
31,75
.003
.004
0,06
0,10
.005
0,13
.006
0,15
.003
.004
0,06
0,10
.003
0,06
.004
.005
0,10
—
—
—
—
—
—
—
—
—
—
—
—
0,13
.007
0,18
.010
.005
.006
0,13
.006
0,15
.007
0,15
0,18
7/8
22,22
—
—
—
—
1
25,40
.007
0,18
—
—
—
—
1 1/4
31,75
.008
0,20
—
—
—
—
0,25
14 & 15.
T-Land Angle
(optional)
▫▫▫▫▫▫▫▫▫
symbol
size
10
10°
15
15°
20
20°
25
25°
30
30°
16.
Tip Style
(optional)
symbol
8.
Hand of Insert
(optional)
D
M
MT
11, 12, & 13.
T-Land Width
(optional)
6.
Thickness
symbol
usage
two-sided mini tip
mini tip
multi tip
symbol
thickness
size
mm
inch
metric
inch
mm
.5 (1)
—
1/32
0,79
04
010
.004
0,01
.6
T0
.040
1,00
08
020
.008
0,02
1 (2)
01
1/16
1,59
inch
metric inch
7.
Corner Radius
symbol
1.2
T1
5.64
1,98
1.5 (3)
02
3/32
2,38
inch
metric
2
03
1/8
3,18
2.5
T3
5/32
3,97
X0
0
.5
1
2
3
4
5
6
7
8
—
—
X0
01
02
04
08
12
16
20
24
28
32
00
M0
3
04
3/16
4,76
3.5
05
7/32
5,56
4
06
1/4
6,35
5
07
5/16
7,94
6
09
3/8
9,52
7
11
7/16
11,11
8
12
1/2
12,70
NOTE: Inch sizes in parenthesis for
“alternate symbols” D or E
(under 1/4 inch IC).
9 & 10.
Cutting Edge Condition or
Chip Control Features (optional)
corner radius
inch
mm
.0015
0,04
.004
0,1
.008
0,2
1/64
0,4
1/32
0,8
3/64
1,2
1/16
1,6
5/64
2,0
3/32
2,4
7/64
2,8
1/8
3,2
round insert (inch)
round insert (metric)
F
FF
FN
sharp
fine finishing
finishing
MN medium
machining negative
RN roughing negative
UN universal negative
FP finishing positive
MP medium positive
RP roughing positive
RM roughing medium
RH roughing heavy
FW finishing wiper
MW medium wiper
RW
HP
-11
K
UF
LF
MF
D
E
T
S
M
EFW
roughing wiper
high positive
fine finishing
light feed chip control
ultra-fine finishing
light finishing
medium finishing
duo tip hone only
hone only
negative land
negative land plus hone
mini tip (brazed PCBN)
honed, finishing wiper
33
Kenloc Inserts
®
CNGA-(S)
CNGA-432*
CNGA-433*
CNGA 12 04 08*
CNGA 12 04 12*
1/2
1/2
3/16 1/32 .1216 .203
3/16 3/64 .1129 .203
CNGG-LF
CNGG-430LF
CNGG-430.5LF
CNGG-431LF
CNGG-432LF
CNGG-433LF
CNGG 12 04 01LF
CNGG 12 04 02LF
CNGG 12 04 04LF
CNGG 12 04 08LF
CNGG 12 04 12LF
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
.004
.008
1/64
1/32
3/64
.1367
.1345
.1302
.1216
.1129
.203
.203
.203
.203
.203
CNGP
CNGP-430
CNGP-430.5
CNGP-431
CNGP-432
CNGP-433
CNGP-434
CNGP 12 04 01
CNGP 12 04 02
CNGP 12 04 04
CNGP 12 04 08
CNGP 12 04 12
CNGP 12 04 16
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
.004
.008
1/64
1/32
3/64
1/16
.1367
.1345
.1302
.1216
.1129
.1042
.203
.203
.203
.203
.203
.203
CNMA
CNMA-432
CNMA-433
CNMA 12 04 08
CNMA 12 04 12
CNMG-FF
CNMG-321FF
CNMG-322FF
CNMG-431FF
CNMG-432FF
CNMG 09 03 04FF
CNMG 09 03 08FF
CNMG 12 04 04FF
CNMG 12 04 08FF
*Available in coated carbide and single-tipped PCD grade KD100.
34
1/2
1/2
3/16 1/32 .1216 .203 3/16 3/64 .1129 .203 3/8
3/8
1/2
1/2
1/8
1/8
3/16
3/16
.150
.150
.203
.203
KT315
KD100
KC9245
KC9240
KC9225
KC9040
KC9215
.0955
.0868
.1302
.1216
KC9125
1/64
1/32
1/64
1/32
KC9110
d1
KC8050
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Kenloc Inserts
CNMG-FP
CNMG-431FP
CNMG-432FP
CNMG-433FP
CNMG 12 04 04FP
CNMG 12 04 08FP
CNMG 12 04 12FP
1/2
1/2
1/2
3/16 1/64 .1302 .203
3/16 1/32 .1216 .203
3/16 3/64 .1129 .203
CNMG-FW
CNMG-431FW
CNMG-432FW
CNMG-433FW
CNMG 12 04 04FW
CNMG 12 04 08FW
CNMG 12 04 12FW
1/2
1/2
1/2
3/16 1/64 .1259 .203
3/16 1/32 .1176 .203
3/16 3/64 .1093 .203
CNMG-MN
CNMG-321MN
CNMG-322MN
CNMG-323MN
CNMG-431MN
CNMG-432MN
CNMG-433MN
CNMG-434MN
CNMG 09 03 04MN
CNMG 09 03 08MN
CNMG 09 03 12MN
CNMG 12 04 04MN
CNMG 12 04 08MN
CNMG 12 04 12MN
CNMG 12 04 16MN
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/64
1/32
3/64
1/16
.0955
.0868
.0781
.1302
.1216
.1129
.1042
.150
.150
.150
.203
.203
.203
.203
CNMG-MP
CNMG-322MP
CNMG-431MP
CNMG-432MP
CNMG-433MP
CNMG-434MP
CNMG 09 03 08MP
CNMG 12 04 04MP
CNMG 12 04 08MP
CNMG 12 04 12MP
CNMG 12 04 16MP
3/8
1/2
1/2
1/2
1/2
1/8
3/16
3/16
3/16
3/16
1/32
1/64
1/32
3/64
1/16
.0868
.1302
.1216
.1129
.1042
.150
.203
.203
.203
.203
KT315
.150
.150
.203
.203
.203
.203
.203
KD100
.0955
.0868
.1345
.1302
.1216
.1129
.1042
KC9245
1/64
1/32
.008
1/64
1/32
3/64
1/16
KC9240
1/8
1/8
3/16
3/16
3/16
3/16
3/16
KC9225
3/8
3/8
1/2
1/2
1/2
1/2
1/2
KC9040
CNMG 09 03 04FN
CNMG 09 03 08FN
CNMG 12 04 02FN
CNMG 12 04 04FN
CNMG 12 04 08FN
CNMG 12 04 12FN
CNMG 12 04 16FN
KC9215
CNMG-321FN
CNMG-322FN
CNMG-430.5FN
CNMG-431FN
CNMG-432FN
CNMG-433FN
CNMG-434FN
CNMG-FN
KC9125
d1
KC9110
m
KC8050
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
35
Kenloc Inserts
®
DNGA 15 04 08*
DNGA 15 04 12*
1/2
1/2
3/16 1/32 .2550 .203
3/16 3/64 .2368 .203
DNGG-LF
DNGG-430.5LF
DNGG-431LF
DNGG-432LF
DNGG 15 04 02LF
DNGG 15 04 04LF
DNGG 15 04 08LF
1/2
1/2
1/2
3/16 .008 .2821 .203 3/16 1/64 .2732 .203 3/16 1/32 .2550 .203 DNGP
DNGP-331
DNGP-430
DNGP-430.5
DNGP-431
DNGP-432
DNGP-441
DNGP-442
DNGP-443
DNGP 11 04 04
DNGP 15 04 01
DNGP 15 04 02
DNGP 15 04 04
DNGP 15 04 08
DNGP 15 06 04
DNGP 15 06 08
DNGP 15 08 12
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
*Grade KD100 is a single-tipped PCD insert.
36
1/64
.004
.008
1/64
1/32
1/64
1/32
3/64
.2004
.2868
.2821
.2732
.2550
.2732
.2550
.2368
.150
.203
.203
.203
.203
.203
.203
.203
KT315
DNGA-432*
DNGA-433*
KD100
DNGA(-S)
KC9245
3/16 1/32 .1216 .203
3/16 1/32 .1216 .203
KC9240
1/2
1/2
KC9225
CNMS 12 04 08
CNMS 12 04 08F*
KC9040
CNMS-432
CNMS-432F*
KC9215
CNMS(-F)
KC9125
3/16 1/32 .1176 .203
3/16 3/64 .1093 .203
KC9110
1/2
1/2
d1
KC8050
CNMG 12 04 08MW
CNMG 12 04 12MW
m
KC5410
CNMG-432MW
CNMG-433MW
rε
KC5025
CNMG-MW
s
KC5010
d
dimensions
K313
ISO
catalog
number
KC730
grades
insert
catalog
number
Kenloc Inserts
.150
.150
.203
.203
.203
.203
DNMG-FN
DNMG-331FN
DNMG-332FN
DNMG-333FN
DNMG-431FN
DNMG-432FN
DNMG-433FN
DNMG-441FN
DNMG-442FN
DNMG-443FN
DNMG 11 04 04FN
DNMG 11 04 08FN
DNMG 11 04 12FN
DNMG 15 04 04FN
DNMG 15 04 08FN
DNMG 15 04 12FN
DNMG 15 06 04FN
DNMG 15 06 08FN
DNMG 15 06 12FN
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/64
1/32
3/64
1/64
1/32
3/64
1/64
1/32
3/64
.2004
.1821
.1639
.2732
.2550
.2368
.2732
.2550
.2368
.150
.150
.150
.203
.203
.203
.203
.203
.203
DNMG-FP
DNMG-331FP
DNMG-332FP
DNMG-431FP
DNMG-432FP
DNMG-433FP
DNMG-441FP
DNMG-442FP
DNMG-443FP
DNMG 11 04 04FP
DNMG 11 04 08FP
DNMG 15 04 04FP
DNMG 15 04 08FP
DNMG 15 04 12FP
DNMG 15 06 04FP
DNMG 15 06 08FP
DNMG 15 06 12FP
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/64
1/32
1/64
1/32
3/64
1/64
1/32
3/64
.2004
.1821
.2732
.2550
.2368
.2732
.2550
.2368
.150
.150
.203
.203
.203
.203
.203
.203
DNMG-FW
DNMG-331FW
DNMG-332FW
DNMG-431FW
DNMG-432FW
DNMG-441FW
DNMG-442FW
DNMG 11 04 04FW
DNMG 11 04 08FW
DNMG 15 04 04FW
DNMG 15 04 08FW
DNMG 15 06 04FW
DNMG 15 06 08FW
3/8
3/8
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
1/4
1/4
1/64†
1/32†
1/64†
1/32†
1/64†
1/32†
.1977
.1790
.2705
.2518
.2705
.2518
.150
.150
.203
.203
.203
.203
DNMG-MN
DNMG-331MN
DNMG-332MN
DNMG-333MN
DNMG-431MN
DNMG-432MN
DNMG-433MN
DNMG-434MN
DNMG-441MN
DNMG-442MN
DNMG-443MN
DNMG-444MN
DNMG 11 04 04MN
DNMG 11 04 08MN
DNMG 11 04 12MN
DNMG 15 04 04MN
DNMG 15 04 08MN
DNMG 15 04 12MN
DNMG 15 04 16MN
DNMG 15 06 04MN
DNMG 15 06 08MN
DNMG 15 06 12MN
DNMG 15 06 16MN
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/64
1/32
3/64
1/64
1/32
3/64
1/16
1/64
1/32
3/64
1/16
.2004
.1821
.1639
.2732
.2550
.2368
.2186
.2732
.2550
.2368
.2186
.150
.150
.150
.203
.203
.203
.203
.203
.203
.203
.203
KT315
.2004
.1821
.2732
.2550
.2732
.2550
KD100
1/64
1/32
1/64
1/32
1/64
1/32
KC9245
3/16
3/16
3/16
3/16
1/4
1/4
KC9240
3/8
3/8
1/2
1/2
1/2
1/2
KC9225
DNMG 11 04 04FF
DNMG 11 04 08FF
DNMG 15 04 04FF
DNMG 15 04 08FF
DNMG 15 06 04FF
DNMG 15 06 08FF
KC9040
DNMG-331FF
DNMG-332FF
DNMG-431FF
DNMG-432FF
DNMG-441FF
DNMG-442FF
KC9215
DNMG-FF
KC9125
d1
KC9110
m
KC8050
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
†D+T style wiper inserts do not produce true corner radii — see wiper section for details, page 16.
37
Kenloc Inserts
®
.150
.150
.150
.203
.203
.203
.203
.203
.203
DNMG-MW
DNMG-432MW
DNMG-433MW
DNMG-442MW
DNMG-443MW
DNMG 15 04 08MW
DNMG 15 04 12MW
DNMG 15 06 08MW
DNMG 15 06 12MW
1/2
1/2
1/2
1/2
3/16
3/16
1/4
1/4
1/32†
3/64†
1/32†
3/64†
.2519
.2355
.2519
.2355
.203
.203
.203
.203
DNMS(-F)
DNMS-432
DNMS-432F*
DNMS 15 04 08
DNMS 15 04 08F*
1/2
1/2
3/16 1/32 .2550 .203
3/16 1/32 .2550 .203
SNGG-LF
SNGG-322LF
SNGG-432LF
SNGG 09 03 08LF
SNGG 12 04 08LF
3/8
1/2
1/8 1/32 .0647 .150 3/16 1/32 .0906 .203
SNGP
SNGP-431
SNGP-432
SNGP 12 04 04
SNGP 12 04 08
1/2
1/2
3/16 1/64 .0971 .203
3/16 1/32 .0906 .203
38
KT315
.2004
.1821
.1639
.2732
.2550
.2368
.2732
.2550
.2368
KD100
1/64
1/32
3/64
1/64
1/32
3/64
1/64
1/32
3/64
KC9245
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
KC9240
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
KC9225
DNMG 11 04 04MP
DNMG 11 04 08MP
DNMG 11 04 12MP
DNMG 15 04 04MP
DNMG 15 04 08MP
DNMG 15 04 12MP
DNMG 15 06 04MP
DNMG 15 06 08MP
DNMG 15 06 12MP
KC9040
DNMG-331MP
DNMG-332MP
DNMG-333MP
DNMG-431MP
DNMG-432MP
DNMG-433MP
DNMG-441MP
DNMG-442MP
DNMG-443MP
KC9215
DNMG-MP
KC9125
d1
KC9110
m
KC8050
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
Kenloc Inserts
3/8
3/8
1/2
1/2
1/8
1/8
3/16
3/16
1/64
1/32
1/64
1/32
.0712
.0647
.0971
.0906
.150
.150
.203
.203
SNMG-FN
SNMG-321FN
SNMG-322FN
SNMG-431FN
SNMG-432FN
SNMG-433FN
SNMG-434FN
SNMG 09 03 04FN
SNMG 09 03 08FN
SNMG 12 04 04FN
SNMG 12 04 08FN
SNMG 12 04 12FN
SNMG 12 04 16FN
3/8
3/8
1/2
1/2
1/2
1/2
1/8
1/8
3/16
3/16
3/16
3/16
1/64
1/32
1/64
1/32
3/64
1/16
.0712
.0647
.0971
.0906
.0841
.0777
.150
.150
.203
.203
.203
.203
SNMG-FP
SNMG-431FP
SNMG-432FP
SNMG-433FP
SNMG 12 04 04FP
SNMG 12 04 08FP
SNMG 12 04 12FP
1/2
1/2
1/2
3/16 1/64 .0971 .203
3/16 1/32 .0906 .203
3/16 3/64 .0841 .203
SNMG-FW
SNMG-432FW
SNMG-433FW
SNMG 12 04 08FW
SNMG 12 04 12FW
1/2
1/2
3/16 1/32 .0803 .203
3/16 3/64 .0742 .203
SNMG-MN
SNMG-321MN
SNMG-322MN
SNMG-323MN
SNMG-431MN
SNMG-432MN
SNMG-433MN
SNMG-434MN
SNMG 09 03 04MN
SNMG 09 03 08MN
SNMG 09 03 12MN
SNMG 12 04 04MN
SNMG 12 04 08MN
SNMG 12 04 12MN
SNMG 12 04 16MN
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/64
1/32
3/64
1/16
.0712
.0647
.0582
.0971
.0906
.0841
.0777
.150
.150
.150
.203
.203
.203
.203
KT315
SNMG 09 03 04FF
SNMG 09 03 08FF
SNMG 12 04 04FF
SNMG 12 04 08FF
KD100
SNMG-321FF
SNMG-322FF
SNMG-431FF
SNMG-432FF
KC9245
SNMG-FF
KC9240
d1
KC9225
m
KC9040
rε
KC9215
s
KC730
d
dimensions
K313
ISO
catalog
number
KC9125
KC9110
KC8050
KC5410
KC5025
KC5010
grades
insert
catalog
number
39
Kenloc Inserts
®
SNMS-432
SNMS-432F*
SNMS-433
SNMS-433F*
SNMS 12 04 08
SNMS 12 04 08F*
SNMS 12 04 12
SNMS 12 04 12F*
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
TNGG-LF
TNGG-330.5LF
TNGG-331LF
TNGG-332LF
TNGG 16 04 02LF
TNGG 16 04 04LF
TNGG 16 04 08LF
3/8
3/8
3/8
3/16 .008 .5545 .150 3/16 1/64 .5469 .150
3/16 1/32 .5313 .150 TNGP
TNGP-330.5
TNGP-331
TNGP-332
TNGP 16 04 02
TNGP 16 04 04
TNGP 16 04 08
3/8
3/8
3/8
3/16 .008 .5545 .150
3/16 1/64 .5469 .150
3/16 1/32 .5313 .150
40
1/32
1/32
3/64
3/64
.0906
.0906
.0841
.0841
.203
.203
.203
.203
KT315
SNMS(-F)
KD100
3/16 1/32 .0803 .203
3/16 3/64 .0742 .203
KC9245
1/2
1/2
KC9240
SNMG 12 04 08MW
SNMG 12 04 12MW
KC9225
SNMG-432MW
SNMG-433MW
KC9040
SNMG-MW
KC9215
3/16 1/32 .0906 .203
3/16 3/64 .0841 .203
3/16 1/16 .0777 .203
KC9125
1/2
1/2
1/2
d1
KC9110
SNMG 12 04 08MP
SNMG 12 04 12MP
SNMG 12 04 16MP
m
KC8050
SNMG-432MP
SNMG-433MP
SNMG-434MP
rε
KC5410
SNMG-MP
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
Kenloc Inserts
TNMG 11 03 04FF
TNMG 11 03 08FF
TNMG 16 04 04FF
TNMG 16 04 08FF
1/4
1/4
3/8
3/8
1/8
1/8
3/16
3/16
1/64
1/32
1/64
1/32
.3594
.3438
.5469
.5313
.091
.091
.150
.150
TNMG-FN
TNMG-331FN
TNMG-332FN
TNMG-333FN
TNMG-431FN
TNMG 16 04 04FN
TNMG 16 04 08FN
TNMG 16 04 12FN
TNMG 22 04 04FN
3/8
3/8
3/8
1/2
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/64
.5469
.5313
.5156
.7344
.150
.150
.150
.203
TNMG-FP
TNMG-331FP
TNMG-332FP
TNMG-333FP
TNMG-431FP
TNMG 16 04 04FP
TNMG 16 04 08FP
TNMG 16 04 12FP
TNMG 22 04 04FP
3/8
3/8
3/8
1/2
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/64
.5469
.5313
.5156
.7344
.150
.150
.150
.203
TNMG-FW
TNMG-331FW
TNMG-332FW
TNMG-333FW
TNMG 16 04 04FW
TNMG 16 04 08FW
TNMG 16 04 12FW
3/8
3/8
3/8
3/16 1/64† .5456 .150
3/16 1/32† .5300 .150
3/16 3/64† .5160 .150
KT315
KD100
KC9245
KC9240
KC9040
KC9125
KC9225
TNMG-221FF
TNMG-222FF
TNMG-331FF
TNMG-332FF
KC9215
TNMG-FF
KC9110
d1
KC8050
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
41
Kenloc Inserts
®
TNMG-MP
TNMG-331MP
TNMG-332MP
TNMG-333MP
TNMG-432MP
TNMG-433MP
TNMG-434MP
TNMG 16 04 04MP
TNMG 16 04 08MP
TNMG 16 04 12MP
TNMG 22 04 08MP
TNMG 22 04 12MP
TNMG 22 04 16MP
3/8
3/8
3/8
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/32
3/64
1/16
.5469
.5313
.5156
.7188
.7031
.6875
.150
.150
.150
.203
.203
.203
TNMG-MW
TNMG-332MW
TNMG-333MW
TNMG 16 04 08MW
TNMG 16 04 12MW
3/8
3/8
3/16 1/32† .5300 .150
3/16 3/64† .5160 .150
TNMS(-F)
TNMS-331
TNMS-331F*
TNMS-332
TNMS-332F*
TNMS-431
TNMS-431F*
TNMS-432
TNMS-432F*
TNMS-433F*
TNMS 16 04 04
TNMS 16 04 04F*
TNMS 16 04 08
TNMS 16 04 08F*
TNMS 22 04 04
TNMS 22 04 04F*
TNMS 22 04 08
TNMS 22 04 08F*
TNMS 22 04 12F*
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
42
1/64
1/64
1/32
1/32
1/64
1/64
1/32
1/32
3/64
.5469
.5469
.5313
.5313
.7344
.7344
.7188
.7188
.7031
.150
.150
.150
.150
.203
.203
.203
.203
.203
KD100
.150
.150
.150
.203
.203
.203
.203
KC9245
.5469
.5313
.5156
.7344
.7188
.7031
.6875
KT315
1/64
1/32
3/64
1/64
1/32
3/64
1/16
KC9240
3/16
3/16
3/16
3/16
3/16
3/16
3/16
KC9225
3/8
3/8
3/8
1/2
1/2
1/2
1/2
KC9040
TNMG 16 04 04MN
TNMG 16 04 08MN
TNMG 16 04 12MN
TNMG 22 04 04MN
TNMG 22 04 08MN
TNMG 22 04 12MN
TNMG 22 04 16MN
KC9215
TNMG-331MN
TNMG-332MN
TNMG-333MN
TNMG-431MN
TNMG-432MN
TNMG-433MN
TNMG-434MN
KC9125
TNMG-MN
KC9110
d1
KC8050
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Kenloc Inserts
.1367
.1345
.1302
.1216
.203
.203
.203
.203
.342
.342
.342
.342
WNMG-FF
WNMG-331FF
WNMG-332FF
WNMG-431FF
WNMG-432FF
WNMG 06 04 04FF
WNMG 06 04 08FF
WNMG 08 04 04FF
WNMG 08 04 08FF
3/8
3/8
1/2
1/2
3/16
3/16
3/16
3/16
1/64
1/32
1/64
1/32
.0955
.0868
.1302
.1216
.150
.150
.203
.203
.257
.257
.342
.342
WNMG-FN
WNMG-331FN
WNMG-332FN
WNMG-431FN
WNMG-432FN
WNMG-433FN
WNMG-434FN
WNMG 06 04 04FN
WNMG 06 04 08FN
WNMG 08 04 04FN
WNMG 08 04 08FN
WNMG 08 04 12FN
WNMG 08 04 16FN
3/8
3/8
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
1/64
1/32
1/64
1/32
3/64
1/16
.0955
.0868
.1302
.1216
.1129
.1042
.150
.150
.203
.203
.203
.203
.257
.257
.342
.342
.342
.342
WNMG-FP
WNMG-331FP
WNMG-332FP
WNMG-431FP
WNMG-432FP
WNMG-433FP
WNMG 06 04 04FP
WNMG 06 04 08FP
WNMG 08 04 04FP
WNMG 08 04 08FP
WNMG 08 04 12FP
3/8
3/8
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
1/64
1/32
1/64
1/32
3/64
.0955
.0868
.1302
.1216
.1129
.150
.150
.203
.203
.203
.257
.257
.342
.342
.342
WNMG-FW
WNMG-331FW
WNMG-332FW
WNMG-333FW
WNMG-431FW
WNMG-432FW
WNMG-433FW
WNMG 06 04 04FW
WNMG 06 04 08FW
WNMG 06 04 12FW
WNMG 08 04 04FW
WNMG 08 04 08FW
WNMG 08 04 12FW
3/8
3/8
3/8
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/64
1/32
3/64
.0923
.0840
.0757
.1259
.1176
.1093
.150
.150
.150
.203
.203
.203
.257
.257
.257
.342
.342
.342
KT315
.004
.008
1/64
1/32
KD100
3/16
3/16
3/16
3/16
KC9245
1/2
1/2
1/2
1/2
KC9240
WNGG 08 04 01LF
WNGG 08 04 02LF
WNGG 08 04 04LF
WNGG 08 04 08LF
KC9225
WNGG-430LF
WNGG-430.5LF
WNGG-431LF
WNGG-432LF
KC9040
WNGG-LF
KC9215
l
KC9125
d1
KC9110
m
KC8050
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
43
Kenloc Inserts
®
.150
.150
.150
.203
.203
.203
.257
.257
.257
.342
.342
.342
WNMG-MP
WNMG-331MP
WNMG-332MP
WNMG-333MP
WNMG-432MP
WNMG-433MP
WNMG 06 04 04MP
WNMG 06 04 08MP
WNMG 06 04 12MP
WNMG 08 04 08MP
WNMG 08 04 12MP
3/8
3/8
3/8
1/2
1/2
3/16
3/16
3/16
3/16
3/16
1/64
1/32
3/64
1/32
3/64
.0955
.0868
.0781
.1216
.1129
.150
.150
.150
.203
.203
.257
.257
.257
.342
.342
WNMG-MW
WNMG-332MW
WNMG-333MW
WNMG-432MW
WNMG-433MW
WNMG 06 04 08MW
WNMG 06 04 12MW
WNMG 08 04 08MW
WNMG 08 04 12MW
3/8
3/8
1/2
1/2
3/16
3/16
3/16
3/16
1/32
3/64
1/32
3/64
.0840
.0757
.1176
.1093
.150
.150
.203
.203
.257
.257
.342
.342
44
KT315
.0955
.0868
.0781
.1216
.1129
.1042
KD100
1/64
1/32
3/64
1/32
3/64
1/16
KC9245
3/16
3/16
3/16
3/16
3/16
3/16
KC9240
3/8
3/8
3/8
1/2
1/2
1/2
KC9225
WNMG 06 04 04MN
WNMG 06 04 08MN
WNMG 06 04 12MN
WNMG 08 04 08MN
WNMG 08 04 12MN
WNMG 08 04 16MN
KC9040
WNMG-331MN
WNMG-332MN
WNMG-333MN
WNMG-432MN
WNMG-433MN
WNMG-434MN
KC9215
WNMG-MN
KC9125
l
KC9110
d1
KC8050
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Screw-On Inserts
.008
1/64
1/32
.008
1/64
1/32
.004
.008
1/64
1/32
.0650
.0608
.0521
.0998
.0955
.0868
.1367
.1345
.1302
.1216
.110
.110
.110
.173
.173
.173
.217
.217
.217
.217
CCGT-LF
CCGT-21.5X.0LF
CCGT-21.50LF
CCGT-21.50.5LF
CCGT-21.51LF
CCGT-21.52LF
CCGT-32.5X.0LF
CCGT-32.50LF
CCGT-32.50.5LF
CCGT-32.51LF
CCGT-32.52LF
CCGT 06 02 X0LF
CCGT 06 02 01LF
CCGT 06 02 02LF
CCGT 06 02 04LF
CCGT 06 02 08LF
CCGT 09 T3 X.0LF
CCGT 09 T3 01LF
CCGT 09 T3 02LF
CCGT 09 T3 04LF
CCGT 09 T3 08LF
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/32
3/32
3/32
3/32
3/32
5/32
5/32
5/32
5/32
5/32
.0015
.004
.008
1/64
1/32
.0015
.004
.008
1/64
1/32
.0686
.0672
.0650
.0608
.0521
.1034
.1020
.0998
.0955
.0868
.110
.110
.110
.110
.110
.173
.173
.173
.173
.173
CCMT-11
CCMT-21.51-11
CCMT-32.51-11
CCMT-32.52-11
CCMT-431-11
CCMT-432-11
CCMT 06 02 0411
CCMT 09 T3 0411
CCMT 09 T3 0811
CCMT 12 04 0411
CCMT 12 04 0811
1/4
3/8
3/8
1/2
1/2
3/32
5/32
5/32
3/16
3/16
1/64
1/64
1/32
1/64
1/32
.0608
.0955
.0868
.1302
.1216
.110
.173
.173
.217
.217
CCMT-FW
CCMT-21.50.5FW
CCMT-21.51FW
CCMT-21.52FW
CCMT-32.51FW
CCMT-32.52FW
CCMT 06 02 02FW
CCMT 06 02 04FW
CCMT 06 02 08FW
CCMT 09 T3 04FW
CCMT 09 T3 08FW
1/4
1/4
1/4
3/8
3/8
3/32
3/32
3/32
5/32
5/32
.008
1/64
1/32
1/64
1/32
.0631
.0590
.0507
.0923
.0840
.110
.110
.110
.173
.173
CCMT-LF
CCMT-21.50.5LF
CCMT-21.51LF
CCMT-21.52LF
CCMT-32.50.5LF
CCMT-32.51LF
CCMT-32.52LF
CCMT-431LF
CCMT-432LF
CCMT-433LF
CCMT 06 02 02LF
CCMT 06 02 04LF
CCMT 06 02 08LF
CCMT 09 T3 02LF
CCMT 09 T3 04LF
CCMT 09 T3 08LF
CCMT 12 04 04LF
CCMT 12 04 08LF
CCMT 12 04 12LF
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/32
3/32
3/32
5/32
5/32
5/32
3/16
3/16
3/16
.008
1/64
1/32
.008
1/64
1/32
1/64
1/32
3/64
.0650
.0608
.0521
.0998
.0955
.0868
.1302
.1216
.1129
.110
.110
.110
.173
.173
.173
.217
.217
.217
KT315
3/32
3/32
3/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
KD100
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
KC9315
CCGT 06 02 02HP
CCGT 06 02 04HP
CCGT 06 02 08HP
CCGT 09 T3 02HP
CCGT 09 T3 04HP
CCGT 09 T3 08HP
CCGT 12 04 01HP
CCGT 12 04 02HP
CCGT 12 04 04HP
CCGT 12 04 08HP
KC9240
CCGT-21.50.5HP
CCGT-21.51HP
CCGT-21.52HP
CCGT-32.50.5HP
CCGT-32.51HP
CCGT-32.52HP
CCGT-430HP
CCGT-430.5HP
CCGT-431HP
CCGT-432HP
KC9225
CCGT-HP
KC9110
d1
KC9125
m
KC8050
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
45
Screw-On Inserts
®
1/64
1/64
1/32
3/64
1/32
.0608
.0955
.0868
.0781
.1216
.110
.173
.173
.173
.217
CCMT-MW
CCMT-32.51MW
CCMT-32.52MW
CCMT-431MW
CCMT-432MW
CCMT 09 T3 04MW
CCMT 09 T3 08MW
CCMT 12 04 04MW
CCMT 12 04 08MW
3/8
3/8
1/2
1/2
5/32
5/32
3/16
3/16
1/64
1/32
1/64
1/32
.0923
.0840
.1259
.1176
.173
.173
.217
.217
CCMT-UF
CCMT-21.51UF
CCMT-32.50.5UF
CCMT-32.51UF
CCMT-32.52UF
CCMT 06 02 04UF
CCMT 09 T3 02UF
CCMT 09 T3 04UF
CCMT 09 T3 08UF
1/4
3/8
3/8
3/8
3/32
5/32
5/32
5/32
1/64
.008
1/64
1/32
.0608
.0998
.0955
.0868
.110
.173
.173
.173
CCMW(-F)
CCMW-32.51F*
CCMW 09 T3 04F*
3/8 5/32
1/64
.0955
.173
CDHB
CDHB-1.20.60.1**
CDHB-1.20.60.5
CDHB-1.20.61**
CDHB S4 T0 00**
CDHB S4 T0 02
CDHB S4 T0 04**
5/32 .040
5/32 .040
5/32 .040
.002
.008
1/64
.0434
.0390
.0347
.083
.083
.083
**Available in coated carbide and single-tipped PCD grade KD100.
46
KD100
KT315
3/32
5/32
5/32
5/32
3/16
KC9315
1/4
3/8
3/8
3/8
1/2
KC9240
CCMT 06 02 04MF
CCMT 09 T3 04MF
CCMT 09 T3 08MF
CCMT 09 T3 12MF
CCMT 12 04 08MF
KC9225
CCMT-21.51MF
CCMT-32.51MF
CCMT-32.52MF
CCMT-32.53MF
CCMT-432MF
KC9110
d1
KC9125
m
KC5410
rε
KC5025
s
KC5010
d
KC730
dimensions
KC8050
CCMT-MF
ISO
catalog
number
K313
grades
insert
catalog
number
Screw-On Inserts
rε
m
d1
CPGB(-F)
CPGB-32.50.5F*
CPGB-32.51F*
CPGB-32.52F*
CPGB 09 T3 02F*
CPGB 09 T3 04F*
CPGB 09 T3 08F*
3/8
3/8
3/8
5/32
5/32
5/32
.008
1/64
1/32
.0998
.0955
.0868
.173
.173
.173
CPGM(-F)
CPGM-32.50*
CPGM-32.50.5*
CPGM-32.50.5F*
CPGM-32.51*
CPGM-32.51F*
CPGM-32.52*
CPGM-32.52F*
CPGH 09 T3 01*
CPGH 09 T3 02*
CPGH 09 T3 02F*
CPGH 09 T3 04*
CPGH 09 T3 04F*
CPGH 09 T3 08*
CPGH 09 T3 08F*
3/8
3/8
3/8
3/8
3/8
3/8
3/8
5/32
5/32
5/32
5/32
5/32
5/32
5/32
.004
.008
.008
1/64
1/64
1/32
1/32
.1020
.0998
.0998
.0955
.0955
.0868
.0868
.173
.173
.173
.173
.173
.173
.173
CPGT-HP
CPGT-21.50.5HP
CPGT-21.51HP
CPGT-21.52HP
CPGT-32.50.5HP
CPGT-32.51HP
CPGT-32.52HP
CPGT 06 02 02HP
CPGT 06 02 04HP
CPGT 06 02 08HP
CPGT 09 T3 02HP
CPGT 09 T3 04HP
CPGT 09 T3 08HP
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
.008
1/64
1/32
.008
1/64
1/32
.0650
.0608
.0521
.0998
.0955
.0868
.110
.110
.110
.173
.173
.173
CPGT-LF
CPGT-21.50LF
CPGT-21.50.5LF
CPGT-21.51LF
CPGT-21.52LF
CPGT-32.50.5LF
CPGT-32.51LF
CPGT-32.52LF
CPGT 06 02 01LF
CPGT 06 02 02LF
CPGT 06 02 04LF
CPGT 06 02 08LF
CPGT 09 T3 02LF
CPGT 09 T3 04LF
CPGT 09 T3 08LF
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
3/32
5/32
5/32
5/32
.004
.008
1/64
1/32
.008
1/64
1/32
.0672
.0650
.0608
.0521
.0998
.0955
.0868
.110
.110
.110
.110
.173
.173
.173
CPGT-UF
CPGT-21.50.5UF
CPGT-21.51UF
CPGT 06 02 02UF
CPGT 06 02 04UF
1/4
1/4
3/32
3/32
.008
1/64
.0650
.0608
.110
.110
KT315
s
KC730
d
dimensions
K313
ISO
catalog
number
KD100
KC9240
KC9225
KC9125
KC8050
KC9110
KC5410
KC5025
KC5010
grades
insert
catalog
number
*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.
NOTE: Grade KD100 is a single-tipped PCD insert.
47
Screw-On Inserts
®
.0650
.0608
.0521
.0955
.0868
.110
.110
.110
.173
.173
CPMT-FW
CPMT-21.50.5FW
CPMT-21.51FW
CPMT-21.52FW
CPMT-32.51FW
CPMT-32.52FW
CPMT 06 02 02FW
CPMT 06 02 04FW
CPMT 06 02 08FW
CPMT 09 T3 04FW
CPMT 09 T3 08FW
1/4
1/4
1/4
3/8
3/8
3/32
3/32
3/32
5/32
5/32
.008
1/64
1/32
1/64
1/32
.0631
.0590
.0507
.0923
.0840
.110
.110
.110
.173
.173
CPMT-LF
CPMT-1.81.50.5LF
CPMT-1.81.51LF
CPMT-21.50.5LF
CPMT-21.51LF
CPMT-21.52LF
CPMT-32.50.5LF
CPMT-32.51LF
CPMT-32.52LF
CPMT 05 02 02LF
CPMT 05 02 04LF
CPMT 06 02 02LF
CPMT 06 02 04LF
CPMT 06 02 08LF
CPMT 09 T3 02LF
CPMT 09 T3 04LF
CPMT 09 T3 08LF
7/32
7/32
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
3/32
3/32
5/32
5/32
5/32
.008
1/64
.008
1/64
1/32
.008
1/64
1/32
.0563
.0521
.0650
.0608
.0521
.0998
.0955
.0868
.104
.104
.110
.110
.110
.173
.173
.173
CPMT-MF
CPMT-21.52MF
CPMT-32.52MF
CPMT-32.53MF
CPMT 06 02 08MF
CPMT 09 T3 08MF
CPMT 09 T3 12MF
1/4 3/32
3/8 5/32
3/8 5/32
1/32
1/32
3/64
.0521
.0868
.0781
.110
.173
.173
CPMT-MW
CPMT-32.51MW
CPMT-32.52MW
CPMT 09 T3 04MW
CPMT 09 T3 08MW
3/8 5/32
3/8 5/32
1/64
1/32
.0923
.0840
.173
.173
48
KT315
.008
1/64
1/32
1/64
1/32
KD100
3/32
3/32
3/32
5/32
5/32
KC9315
1/4
1/4
1/4
3/8
3/8
KC9240
CPGW 06 02 02F*
CPGW 06 02 04F*
CPGW 06 02 08F*
CPGW 09 T3 04F*
CPGW 09 T3 08F*
KC9225
CPGW-21.50.5F*
CPGW-21.51F*
CPGW-21.52F*
CPGW-32.51F*
CPGW-32.52F*
KC9110
CPGW(-F)
KC9125
d1
KC8050
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Screw-On Inserts
CPMT-UF
CPMT-21.51UF
CPMT-32.51UF
.110
.173
CPMW(-F)
CPMW-1.81.50.5F*
CPMW 05 02 02F*
7/32
3/32
.008
.0563
.104
DCGT-HP
DCGT-21.50.5HP
DCGT-21.51HP
DCGT-21.52HP
DCGT-32.50.5HP
DCGT-32.51HP
DCGT-32.52HP
DCGT 07 02 02HP
DCGT 07 02 04HP
DCGT 07 02 08HP
DCGT 11 T3 02HP
DCGT 11 T3 04HP
DCGT 11 T3 08HP
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
.008
1/64
1/32
.008
1/64
1/32
.1364
.1275
.1093
.2092
.2004
.1821
.110
.110
.110
.173
.173
.173
DCGT-LF
DCGT-21.5X.0LF
DCGT-21.50LF
DCGT-32.5X.0LF
DCGT-32.50LF
DCGT-432LF
DCGT 07 02 X.0LF
DCGT 07 02 01LF
DCGT 11 T3 X.0LF
DCGT 11 T3 01LF
DCGT 15 04 08LF
1/4
1/4
3/8
3/8
1/2
3/32
3/32
5/32
5/32
3/16
.0015
.004
.0015
.004
1/32
.1440
.1410
.2168
.2139
.2550
.110
.110
.173
.173
.217
DCMT-11
DCMT-21.50.5-11
DCMT-21.51-11
DCMT-32.51-11
DCMT-32.52-11
DCMT 07 02 02 -11
DCMT 07 02 04 -11
DCMT 11 T3 04 -11
DCMT 11 T3 08 -11
1/4
1/4
3/8
3/8
3/32
3/32
5/32
5/32
.008
1/64
1/64
1/32
.1364
.1275
.2004
.1821
.110
.110
.173
.173
KT315
.0608
.0955
KD100
1/64
1/64
KC9240
3/32
5/32
KC9225
1/4
3/8
KC9125
CPMT 06 02 04UF
CPMT 09 T3 04UF
KC8050
d1
KC9110
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
49
Screw-On Inserts
®
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
3/32
3/32
5/32
5/32
5/32
5/32
3/16
3/16
.008
1/64
.008
1/64
1/32
3/64
1/64
1/32
.1364
.1275
.2092
.2004
.1821
.1639
.2732
.2550
.110
.110
.173
.173
.173
.173
.217
.217
DCMT-MF
DCMT-32.51MF
DCMT-32.52MF
DCMT-32.53MF
DCMT 11 T3 04MF
DCMT 11 T3 08MF
DCMT 11 T3 12MF
3/8
3/8
3/8
5/32
5/32
5/32
1/64
1/32
3/64
.2004
.1821
.1639
.173
.173
.173
DCMT-UF
DCMT-21.51UF
DCMT-32.50.5UF
DCMT-32.51UF
DCMT-32.52UF
DCMT 07 02 04UF
DCMT 11 T3 02UF
DCMT 11 T3 04UF
DCMT 11 T3 08UF
1/4
3/8
3/8
3/8
3/32
5/32
5/32
5/32
1/64
.008
1/64
1/32
.1275
.2092
.2004
.1821
.110
.173
.173
.173
DCMW(-F)
DCMW-32.51F*
DCMW 11 T3 04F*
3/8
5/32
1/64
.2004
.173
DPGT-HP
DPGT-21.50.5HP
DPGT-21.51HP
DPGT-21.52HP
DPGT-32.51HP
DPGT-32.52HP
DPGT 07 02 02HP
DPGT 07 02 04HP
DPGT 07 02 08HP
DPGT 11 T3 04HP
DPGT 11 T3 08HP
1/4
1/4
1/4
3/8
3/8
3/32
3/32
3/32
5/32
5/32
.008
1/64
1/32
1/64
1/32
.1364
.1275
.1093
.2004
.1821
.110
.110
.110
.173
.173
50
KT315
DCMT 07 02 02LF
DCMT 07 02 04LF
DCMT 11 T3 02LF
DCMT 11 T3 04LF
DCMT 11 T3 08LF
DCMT 11 T3 12LF
DCMT 15 04 04LF
DCMT 15 04 08LF
KD100
DCMT-21.50.5LF
DCMT-21.51LF
DCMT-32.50.5LF
DCMT-32.51LF
DCMT-32.52LF
DCMT-32.53LF
DCMT-431LF
DCMT-432LF
KC9240
DCMT-LF
KC9225
d1
KC9125
m
KC8050
rε
K313
s
KC9110
d
dimensions
KC5410
KC5010
ISO
catalog
number
KC5025
KC730
grades
insert
catalog
number
Screw-On Inserts
DPGT 07 02 01LF
DPGT 07 02 02LF
DPGT 07 02 04LF
DPGT 11 T3 01LF
DPGT 11 T3 02LF
DPGT 11 T3 04LF
DPGT 11 T3 08LF
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
5/32
.004
.008
1/64
.004
.008
1/64
1/32
.1410
.1364
.1275
.2139
.2092
.2004
.1821
.110
.110
.110
.173
.173
.173
.173
DPGW-F
DPGW-32.51F*
DPGW-32.52F*
DPGW 11 T3 04F*
DPGW 11 T3 08F*
3/8
3/8
5/32
5/32
1/64
1/32
.2004
.1821
.173
.173
DPMT-LF
DPMT-21.50.5LF
DPMT-21.51LF
DPMT-32.50.5LF
DPMT-32.51LF
DPMT-32.52LF
DPMT 07 02 02LF
DPMT 07 02 04LF
DPMT 11 T3 02LF
DPMT 11 T3 04LF
DPMT 11 T3 08LF
1/4
1/4
3/8
3/8
3/8
3/32
3/32
5/32
5/32
5/32
.008
1/64
.008
1/64
1/32
.1364
.1275
.2092
.2004
.1821
.110
.110
.173
.173
.173
DPMT-MF
DPMT-32.52MF
DPMT 11 T3 08MF
3/8
5/32
1/32
.1821
.173
DPMT-UF
DPMT-21.51UF
DPMT-32.51UF
DPMT-32.52UF
DPMT 07 02 04UF
DPMT 11 T3 04UF
DPMT 11 T3 08UF
1/4
3/8
3/8
3/32
5/32
5/32
1/64
1/64
1/32
.1275
.2004
.1821
.110
.173
.173
KT315
DPGT-21.50LF
DPGT-21.50.5LF
DPGT-21.51LF
DPGT-32.50LF
DPGT-32.50.5LF
DPGT-32.51LF
DPGT-32.52LF
KD100
DPGT-LF
d1
K313
m
KC9240
rε
KC9225
KC5410
s
KC9125
KC5025
d
dimensions
KC8050
KC5010
ISO
catalog
number
KC9110
KC730
grades
insert
catalog
number
51
Screw-On Inserts
®
DPMW-21.50.5F*
DPMW-32.51F*
DPMW-32.52F*
DPMW 07 02 02F*
DPMW 11 T3 04F*
DPMW 11 T3 08F*
1/4
3/8
3/8
3/32
5/32
5/32
.008
1/64
1/32
.1364
.2004
.1821
.110
.173
.173
SCGT-LF
SCGT-432LF
SCGT 12 04 08LF
1/2
3/16
1/32
.0906
.217
SCMT-11
SCMT-32.51-11
SCMT-32.52-11
SCMT-431-11
SCMT-432-11
SCMT 09 T3 04 -11
SCMT 09 T3 08 -11
SCMT 12 04 04 -11
SCMT 12 04 08 -11
3/8
3/8
1/2
1/2
5/32
5/32
3/16
3/16
1/64
1/32
1/64
1/32
.0712
.0647
.0971
.0906
.173
.173
.217
.217
SCMT-LF
SCMT-32.51LF
SCMT-32.52LF
SCMT-431LF
SCMT-432LF
SCMT-433LF
SCMT 09 T3 04LF
SCMT 09 T3 08LF
SCMT 12 04 04LF
SCMT 12 04 08LF
SCMT 12 04 12LF
3/8
3/8
1/2
1/2
1/2
5/32
5/32
3/16
3/16
3/16
1/64
1/32
1/64
1/32
3/64
.0712
.0647
.0971
.0906
.0841
.173
.173
.217
.217
.217
SCMT-MF
SCMT-32.52MF
SCMT-432MF
SCMT-433MF
SCMT 09 T3 08MF
SCMT 12 04 08MF
SCMT 12 04 12MF
3/8
1/2
1/2
5/32
3/16
3/16
1/32
1/32
3/64
.0647
.0906
.0841
.173
.217
.217
KT315
DPMW(-F)
52
KD100
KC9240
KC9225
KC9125
KC8050
d1
KC9110
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Screw-On Inserts
rε
m
SCMT-UF
SCMT-32.52UF
SCMT 09 T3 08UF
3/8
5/32
1/32
.0647
.173
SPGH
SPGH-2.51.52
SPGH-322
SPGH 07 02 08
SPGH 09 03 08
5/16
3/8
3/32
1/8
1/32
1/32
.0518
.0647
.128
.156
SPGT-LF
SPGT-32.51LF
SPGT-32.52LF
SPGT-432LF
SPGT 09 T3 04LF
SPGT 09 T3 08LF
SPGT 12 04 08LF
3/8
3/8
1/2
5/32
5/32
3/16
1/64
1/32
1/32
.0712
.0647
.0906
.173
.173
.217
SPMT-LF
SPMT-32.51LF
SPMT-32.52LF
SPMT 09 T3 04LF
SPMT 09 T3 08LF
3/8
3/8
5/32
5/32
1/64
1/32
.0712
.0647
.173
.173
SPMT-MF
SPMT-32.52MF
SPMT-432MF
SPMT 09 T3 08MF
SPMT 12 04 08MF
3/8
1/2
5/32
3/16
1/32
1/32
.0647
.0906
.173
.217
d1
KT315
s
KC730
d
dimensions
K313
ISO
catalog
number
KD100
KC9240
KC9225
KC9125
KC8050
KC9110
KC5410
KC5025
KC5010
grades
insert
catalog
number
53
Screw-On Inserts
®
3/8
5/32
1/64
.0712
.173
TCGT-HP
TCGT-21.50.5HP
TCGT-21.51HP
TCGT-21.52HP
TCGT-32.50.5HP
TCGT-32.51HP
TCGT-32.52HP
TCGT 11 02 02HP
TCGT 11 02 04HP
TCGT 11 02 08HP
TCGT 16 T3 02HP
TCGT 16 T3 04HP
TCGT 16 T3 08HP
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
.008
1/64
1/32
.008
1/64
1/32
.3670
.3594
.3438
.5545
.5469
.5313
.110
.110
.110
.173
.173
.173
TCGT-LF
TCGT-21.5X0LF
TCGT-21.50LF
TCGT-21.51LF
TCGT-32.5X0LF
TCGT-32.50LF
TCGT-32.50.5LF
TCGT-32.51LF
TCGT-32.52LF
TCGT 11 02 X0LF
TCGT 11 02 01LF
TCGT 11 02 04LF
TCGT 16 T3 X0LF
TCGT 16 T3 01LF
TCGT 16 T3 02LF
TCGT 16 T3 04LF
TCGT 16 T3 08LF
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
5/32
5/32
.0015
.004
1/64
.0015
.004
.008
1/64
1/32
.3735
.3710
.3594
.5610
.5585
.5545
.5469
.5313
.110
.110
.110
.173
.173
.173
.173
.173
TCMT-11
TCMT-21.51-11
TCMT-32.51-11
TCMT-32.52-11
TCMT 11 02 04 -11
TCMT 16 T3 04 -11
TCMT 16 T3 08 -11
1/4
3/8
3/8
3/32
5/32
5/32
1/64
1/64
1/32
.3594
.5469
.5313
.110
.173
.173
TCMT-LF
TCMT-21.50.5LF
TCMT-21.51LF
TCMT-21.52LF
TCMT-32.50.5LF
TCMT-32.51LF
TCMT-32.52LF
TCMT-32.53LF
TCMT-432LF
TCMT 11 02 02LF
TCMT 11 02 04LF
TCMT 11 02 08LF
TCMT 16 T3 02LF
TCMT 16 T3 04LF
TCMT 16 T3 08LF
TCMT 16 T3 12LF
TCMT 22 04 08LF
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
3/32
3/32
3/32
5/32
5/32
5/32
5/32
3/16
.008
1/64
1/32
.008
1/64
1/32
3/64
1/32
.3670
.3594
.3438
.5545
.5469
.5313
.5156
.7188
.110
.110
.110
.173
.173
.173
.173
.217
54
KT315
SPMT 09 T3 04UF
KD100
SPMT-32.51UF
KC9240
SPMT-UF
KC9225
d1
KC9125
m
KC8050
rε
KC9110
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5410
KC5025
KC5010
grades
insert
catalog
number
Screw-On Inserts
.3438
.5313
.5156
.110
.173
.173
TCMT-UF
TCMT-21.51UF
TCMT-21.52UF
TCMT-32.52UF
TCMT 11 02 04UF
TCMT 11 02 08UF
TCMT 16 T3 08UF
1/4
1/4
3/8
3/32
3/32
5/32
1/64
1/32
1/32
.3594
.3438
.5313
.110
.110
.173
TCMW(-F)
TCMW-21.51F*
TCMW 11 02 04F*
1/4
3/32
1/64
.3594
.110
TDHB
TDHB-1.280.750.5**
TDHB-1.280.751**
TDHB-1.280.752**
TDHB 07T 1,202**
TDHB 07T 1,204**
TDHB 07T 1,208**
.160
.160
.160
3/64
3/64
3/64
.008
1/64
1/32
.2293
.2213
.2053
.094
.094
.094
TDHH
TDHH-1.280.750.5R
TDHH-1.280.750.5L
TDHH-1.280.751R
TDHH-1.280.751L
TDHH-1.280.752R
TDHH-1.280.752L
TDHH 07T 1,202R
TDHH 07T 1,202L
TDHH 07T 1,204R
TDHH 07T 1,204L
TDHH 07T 1,208R
TDHH 07T 1,208L
.160
.160
.160
.160
.160
.160
3/64
3/64
3/64
3/64
3/64
3/64
.008
.008
1/64
1/64
1/32
1/32
.2293
.2293
.2213
.2213
.2053
.2053
.094
.094
.094
.094
.094
.094
KT315
1/32
1/32
3/64
KD100
3/32
5/32
5/32
KC9240
1/4
3/8
3/8
KC9225
TCMT 11 02 08MF
TCMT 16 T3 08MF
TCMT 16 T3 12MF
KC9125
TCMT-21.52MF
TCMT-32.52MF
TCMT-32.53MF
KC8050
TCMT-MF
d1
KC9110
m
KC5410
rε
KC5025
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5010
grades
insert
catalog
number
**Available in coated carbide and single-tipped PCD grade KD100.
55
Screw-On Inserts
®
TPGM(-F)
TPGT-HP
TPGT-LF
.3710
.3670
.3670
.3594
.3594
.3438
.3438
.5469
.5313
.110
.110
.110
.110
.110
.110
.110
.173
.173
TPGT-21.50.5HP
TPGT-21.51HP
TPGT-21.52HP
TPGT-32.50.5HP
TPGT-32.51HP
TPGT-32.52HP
TPGT 11 02 02HP
TPGT 11 02 04HP
TPGT 11 02 08HP
TPGT 16 T3 02HP
TPGT 16 T3 04HP
TPGT 16 T3 08HP
1/4
1/4
1/4
3/8
3/8
3/8
3/32
3/32
3/32
5/32
5/32
5/32
.008
1/64
1/32
.008
1/64
1/32
.3670
.3594
.3438
.5545
.5469
.5313
.110
.110
.110
.173
.173
.173
TPGT-1.81.50.5LF
TPGT-1.81.51LF
TPGT-21.50LF
TPGT-21.50.5LF
TPGT-21.51LF
TPGT-21.52LF
TPGT-32.51LF
TPGT-32.52LF
TPGT 09 02 02LF
TPGT 09 02 04LF
TPGT 11 02 01LF
TPGT 11 02 02LF
TPGT 11 02 04LF
TPGT 11 02 08LF
TPGT 16 T3 04LF
TPGT 16 T3 08LF
7/32
7/32
1/4
1/4
1/4
1/4
3/8
3/8
3/32
3/32
3/32
3/32
3/32
3/32
5/32
5/32
.008
1/64
.004
.008
1/64
1/32
1/64
1/32
.3201
.3125
.3710
.3670
.3594
.3438
.5469
.5313
.104
.104
.110
.110
.110
.110
.173
.173
TPGW(-F)
TPGW-21.50.5F**
TPGW-21.51F**
TPGW-21.52F**
TPGW 11 02 02F**
TPGW 11 02 04F**
TPGW 11 02 08F**
1/4
1/4
1/4
3/32
3/32
3/32
.008
1/64
1/32
.3670
.3594
.3438
.110
.110
.110
TPMT-LF
TPMT-1.81.50.5LF
TPMT-1.81.51LF
TPMT-21.50.5LF
TPMT-21.51LF
TPMT-21.52LF
TPMT-32.51LF
TPMT-32.52LF
TPMT-32.53LF
TPMT-432LF
TPMT 09 02 02LF
TPMT 09 02 04LF
TPMT 11 02 02LF
TPMT 11 02 04LF
TPMT 11 02 08LF
TPMT 16 T3 04LF
TPMT 16 T3 08LF
TPMT 16 T3 12LF
TPMT 22 04 08LF
7/32
7/32
1/4
1/4
1/4
3/8
3/8
3/8
1/2
3/32
3/32
3/32
3/32
3/32
5/32
5/32
5/32
3/16
.008
1/64
.008
1/64
1/32
1/64
1/32
3/64
1/32
.3201
.3125
.3670
.3594
.3438
.5469
.5313
.5156
.7188
.104
.104
.110
.110
.110
.173
.173
.173
.217
*These inserts have 90° countersunk holes. For more information, see page 725 in Catalog 1010.
**Grade KD100 is a single-tipped PCD insert.
56
KT315
.004
.008
.008
1/64
1/64
1/32
1/32
1/64
1/32
KD100
3/32
3/32
3/32
3/32
3/32
3/32
3/32
5/32
5/32
KC9240
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
KC9225
TPGT 11 02 01K
TPGT 11 02 02K
TPGT 11 02 02K**
TPGT 11 02 04K
TPGT 11 02 04K**
TPGT 11 02 08K
TPGT 11 02 08K**
TPGH 16 T3 04*
TPGH 09 T3 08*
KC9125
TPGM-21.50
TPGM-21.50.5
TPGM-21.50.5F**
TPGM-21.51
TPGM-21.51F**
TPGM-21.52
TPGM-21.52F**
TPGM-32.51*
TPGM-32.52*
KC8050
d1
KC9110
m
KC5410
rε
KC5025
s
KC5010
d
dimensions
KC730
ISO
catalog
number
K313
grades
insert
catalog
number
Screw-On Inserts
1/32
1/32
3/64
.3438
.5313
.5156
.110
.173
.173
TPMT-UF
TPMT-21.50.5UF
TPMT-21.51UF
TPMT-32.51UF
TPMT-32.52UF
TPMT 11 02 02UF
TPMT 11 02 04UF
TPMT 16 T3 04UF
TPMT 16 T3 08UF
1/4
1/4
3/8
3/8
3/32
3/32
5/32
5/32
.008
1/64
1/64
1/32
.3670
.3594
.5469
.5313
.110
.110
.173
.173
VBGT-HP
VBGT-220.5HP
VBGT-221HP
VBGT-331HP
VBGT-332HP
VBGT 11 03 02HP
VBGT 11 03 04HP
VBGT 16 04 04HP
VBGT 16 04 08HP
1/4
1/4
3/8
3/8
1/8
1/8
3/16
3/16
.008
1/64
1/64
1/32
.2721
.2544
.3997
.3634
.110
.110
.173
.173
VBGT-LF
VBGT-22X.0LF
VBGT-220LF
VBGT-220.5LF
VBGT-221LF
VBGT-33X.0LF
VBGT-330LF
VBGT-330.5LF
VBGT-331LF
VBGT 11 03 X0LF
VBGT 11 03 01LF
VBGT 11 03 02LF
VBGT 11 03 04LF
VBGT 16 04 X0LF
VBGT 16 04 01LF
VBGT 16 04 02LF
VBGT 16 04 04LF
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
.0015
.004
.008
1/64
.0015
.004
.008
1/64
.2872
.2814
.2721
.2544
.4325
.4267
.4174
.3997
.110
.110
.110
.110
.173
.173
.173
.173
VBGW-F
VBGW-331F*
VBGW 16 04 04F*
3/8
3/16
1/64
.3997
.173
VBMT-11
VBMT-220.5-11
VBMT-221-11
VBMT-331-11
VBMT-332-11
VBMT 11 03 02 -11
VBMT 11 03 04 -11
VBMT 16 04 04 -11
VBMT 16 04 08 -11
1/4
1/4
3/8
3/8
1/8
1/8
3/16
3/16
.008
1/64
1/64
1/32
.2721
.2544
.3997
.3634
.110
.110
.173
.173
KT315
3/32
5/32
5/32
KD100
1/4
3/8
3/8
KC9240
TPMT 11 02 08MF
TPMT 16 T3 08MF
TPMT 16 T3 12MF
KC9225
TPMT-21.52MF
TPMT-32.52MF
TPMT-32.53MF
TPMT-MF
KC9125
d1
KC8050
m
KC9110
rε
KC5410
s
KC730
d
dimensions
K313
ISO
catalog
number
KC5025
KC5010
grades
insert
catalog
number
57
Screw-On Inserts
®
VBMT 11 03 02LF
VBMT 11 03 04LF
VBMT 11 03 08LF
VBMT 16 04 02LF
VBMT 16 04 04LF
VBMT 16 04 08LF
1/4
1/4
1/4
3/8
3/8
3/8
1/8
1/8
1/8
3/16
3/16
3/16
.008
1/64
1/32
.008
1/64
1/32
.2721
.2544
.2180
.4174
.3997
.3634
.110
.110
.110
.173
.173
.173
—
—
—
—
—
—
VPGP
VPGP-443K
VPGP 22 06 12K
1/2
1/4
3/64
—
.203
—
WCMT-LF
WCMT-21.51LF
WCMT-32.52LF
WCMT 04 02 04LF
WCMT 06 T3 08LF
1/4
3/8
3/32
5/32
1/64
1/32
.0608
.0868
.110
.173
.171
.257
WPMT-LF
WPMT-1.51.21LF
WPMT-21.51LF
WPMT-32.51LF
WPMT-32.52LF
WPMT S3 T1 04LF
WPMT 04 02 04LF
WPMT 06 T3 04LF
WPMT 06 T3 08LF
3/16
1/4
3/8
3/8
5/64
3/32
5/32
5/32
1/64
1/64
1/64
1/32
.0434
.0608
.0955
.0868
.085
.110
.173
.173
.128
.171
.257
.257
58
KT315
KC5010
VBMT-220.5LF
VBMT-221LF
VBMT-222LF
VBMT-330.5LF
VBMT-331LF
VBMT-332LF
KD100
KC730
VBMT-LF
KC9240
l
KC9225
d1
KC9125
m
KC8050
rε
KC9110
s
KC5410
d
dimensions
KC5025
ISO
catalog
number
K313
grades
insert
catalog
number
Top Notch
Profiling Inserts
®
®
Steel
Stainless Steel
Non-Ferrous
High-Temperature Alloys
59
KENNA PERFECT Top Notch Profiling
®
Medium Machining
NP.5M, NP.5..
NP.5M
NP.5..
Finishing
NPGR
Finishing
NP.5..
NOTE: See Technical Section of Catalog 1010
for chipbreaker details (pages 656-657).
Steel — Carbon, Alloy, and Tool Steels up to 48 HRC
Cutting Condition
KC9110
KC8050
KC8050
KC9110
KC9125
KC9125
KT315
KC9110
KC9110
KT315
KT315
KC9110
Speed - sfm (m/min)
Material
Grade
170
(50)
330
(100)
490
(150)
655
(200)
820
(250)
Starting Conditions
980
(300)
1150
(350)
1300
(400)
sfm
m/min
KT315
850
260
KC9110
800
240
KC9125
600
180
KC8050
550
165
steel
NOTE: For expert application guidance, refer to Catalog 1010, page 633.
60
Stainless Steel — Austenitic
Cutting Condition
KC9225
KC8050
KC8050
KC5010
KC8050
KC8050
KC5010
KC9225
KC9225
KT315
KC5010
KC9225
Speed - sfm (m/min)
Material
Grade
stainless
steel
170
(50)
330
(100)
490
(150)
655
(200)
820
(250)
Starting Conditions
980
(300)
1150
(350)
1300
(400)
sfm
m/min
KT315
750
230
KC5010
600
180
KC9225
550
170
KC8050
500
150
Non-Ferrous
Cutting Condition
KC5010
KC5010
K68/K313
KC5010
KC5010
K68/K313
KD100
KC5410
KC5010
KD100
KC5410
KC5010
Speed - sfm (m/min)
Material
non-ferrous
Grade
800
(250)
1600
(500)
2400
(750)
3200
(1000)
4000
(1250)
Starting Conditions
4800
(1500)
5600
(1750)
6400
(2000)
sfm
m/min
KD100
2500
765
KC5410
1800
550
KC5010
650
200
K68/K313
500
150
61
®
High-Temperature Alloys — Nickel, Iron, or Cobalt-Based Alloys; Titanium Alloys
Cutting Condition
KC5025
K68/K313
K68/K313
KC5010
KC5010
KC8050
KD120
KC5010
KC5010
KD050
KC5010
KC5010
Material
high-temp
alloys
Grade
50
(15)
120
(40)
180
(55)
Starting Conditions
550
(170)
655
(200)
750
(230)
sfm
m/min
KD050
600
180
KD120
400
120
KC5010
200
60
KC5025
170
50
KC8050
230
70
K68/K313
100
30
62
Speed - sfm (m/min)
250
330
(80)
(100)
Top Notch Profiling Inserts
m
l1
KC5025
KC5410
KC8050
KC9110
KC9125
KC9225
KT315
KD100
NPGR-51R
NPGR-52R
NPGR-51L
NPGR-52L
KCGR 11 03 04 R08
KCGR 11 03 08 R08
KCGR 11 03 04 L08
KCGR 11 03 08 L08
1/4
1/4
1/4
1/4
1/8
1/8
1/8
1/8
1/64
1/32
1/64
1/32
.3584
.3409
.3584
.3409
.375
.375
.375
.375
NPR-50.5
NPR-50.8
NPR-51
NPR-52
NPL-50.5
NPL-50.8
NPL-51
NPL-52
KCGX 11 03 01 R15
KCGX 11 03 02 R15
KCGX 11 03 04 R15
KCGX 11 03 08 R15
KCGX 11 03 01 L15
KCGX 11 03 02 L15
KCGX 11 03 04 L15
KCGX 11 03 08 L15
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
.004
.008
1/64
1/32
.005
.008
1/64
1/32
.3712
.3677
.3584
.3409
.3712
.3677
.3584
.3409
.375
.375
.375
.375
.375
.375
.375
.375
NPR-5M02
NPR-5M05
NPR-5M10
NPL-5M02
NPL-5M05
NPL-5M10
KCUX 11 03 02 R15
KCUX 11 03 05 R15
KCUX 11 03 10 R15
KCUX 11 03 02 L15
KCUX 11 03 05 L15
KCUX 11 03 10 L15
1/4
1/4
1/4
1/4
1/4
1/4
1/8
1/8
1/8
1/8
1/8
1/8
.008
.020
.039
.008
.020
.039
.3671
.3533
.3303
.3671
.3533
.3303
.375
.375
.375
.375
.375
.375
KD120
rε
KC5010
NPGR
KC9315
s
dimensions
K313
a
K68
grades
ISO
catalog
number
insert
catalog
number
precision ground inch nose radius
NPR/L
precision ground inch nose radius
NPR/L
precision molded metric
nose radius
NOTE: Grade KD100 is a single-tipped PCD insert.
Grade KD120 is a single-tipped CBN insert.
63
Positive Boring Inserts
®
Kendex Mini
grades
ANSI/ISO insert catalog number
left hand
l
a
s
rε
m
K68
KC720
BPGF 03 02 01L
.118
.118
.079
.079
.079
.079
.002
.002
.055
.055
BPGF 03 02 02L
.118
.118
.079
.079
.079
.079
.008
.008
.055
.055
BPGF 05 03 01L
.177
.177
.098
.098
.098
.098
.002
.002
.047
.047
BPGF 05 03 02L
.177
.177
.098
.098
.098
.098
.008
.008
.047
.047
BPGF 05 03 04L
.177
.177
.098
.098
.098
.098
.016
.016
.063
.063
right hand
BPGF
dimensions
BPGF 03 02 01R
BPGF 03 02 02R
BPGF 05 03 01R
BPGF 05 03 02R
BPGF 05 03 04R
Kendex mini boring
bars are specially
designed to finish
bore diameters as
small as .250 inches.
Kendex mini inserts
contain two precision
ground cutting edges.
Inserts are available
in uncoated and PVD
coated grades.
See boring bars on pages 186-188.
64
Ground inserts in their
neutral position and the
precision insert pocket
combine to ensure
superior surface finishes.
Our unique system
design protects the
second cutting edge
from damage while the
first edge is in operation.
Threading Inserts
page
Top Notch Threading . . . . . . . . . . . . . . . . . . . . .
65
KENNA PERFECT Selection Guide . . . . . . . . . . . . . . . . .
66
Thread Form Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
71
Top Notch Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . .
72
LT – Laydown Threading Inserts . . . . . . . . . . . . . . . . . . . . . .
77
KENNA PERFECT Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . .
78
Thread Form Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
Insert ID System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
LT Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
84
Top Notch Threading and Grooving Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . see page 172
Top Notch Threading and Grooving Boring Bars. . . . . . . . . . . . . . . . . . . . . . see pages 190-193
LT Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 173
LT Boring Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see pages 194-197
LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 196
Threading Technical Data . . . . . . . . . . . . . . . . . . see pages 674-692 in Lathe Tooling Catalog 1010
65
KENNA PERFECT
Top Notch
Threading System
®
®
4 Easy Steps to Increased
Threading Productivity
Step 1:
Select threading method and hand of tooling.
What you need to know:
external/internal operation
spindle rotation
feed direction
Feed Direction Towards the Chuck
L
insert
insert
insert
R
external lefthand thread
L
L
L
R
external righthand thread
insert
R
R
internal righthand thread
internal lefthand thread
Feed Direction Away from the Chuck
L
insert
insert
insert
L
L
R
R
external righthand thread
external lefthand thread
R
internal righthand thread
Step 2:
catalog number
NT-2RK
NT-3RK
NT-4RK
66
KC5025
KC5010
Select insert.
thread form
hand of insert
◆ See thread form guide on pages 68-70.
◆ Select cresting inserts for fully
controlled thread form including
diameter control. Cresting inserts
eliminate the need for deburring.
◆ Non-cresting partial profile inserts
can cut a variety of thread pitches.
Chip control is only available with
partial profile inserts.
insert
L
R
internal lefthand thread
Threading Productivity
Step 3: Select grade and speed.
workpiece material
operation
Recommendations for Grade and Speed Selections
threading
operation
external
stainless
steel
steel
general purpose
style
KC5025
100-650 sfm
general purpose
style
chip control
KC5025
chip control
KC5025
or neutral
150-450 sfm
or neutral
150-1,000 sfm
high performance
internal
high performance
general purpose
style
positive
high performance
KC5010
chip control
KC5010
chip control
KC5410/KC5010
150-650 sfm
or neutral
200-650 sfm
or neutral
250-1,300 sfm
general purpose
style
general purpose
style
general purpose
KC5025
chip control
KC5025
chip control
KC5025
100-550 sfm
or neutral
150-350 sfm
or neutral
150-800 sfm
high performance
Examples:
non-ferrous
high performance
KC5010
chip control
KC5010
chip control
KC5410/KC5010
or neutral
200-550 sfm
or neutral
250-1,100 sfm
general purpose
KC5025
20-250 sfm
style
positive
high performance
positive
style
positive
high performance
150-550 sfm
high-temp
alloys
KC5010
80-400 sfm
general purpose
KC5025
20-200 sfm
positive
style
positive
high performance
positive
KC5010
80-325 sfm
positive
Chip Control: NT-K or NT-CK (partial profile only)
Neutral: NT, NT-C, NTF, NTC, NJ, NJF, NDC-V, NA, NDC, NTB-A/B
Positive: NTP, NTK, NJP, NJK
Step 4:
Select the toolholder.
external/internal operation
pitch diameter
(for internal operations)
hand of tool
insert size
catalog number
gage insert
NSR-163D
NSR-164D*
NG-3R
NG-4R
NOTE: Top Notch toolholders and boring bars are listed with
grooving inserts as the gage insert. They are compatible with
threading inserts of the same size.
* Refer to Lathe Tooling Catalog 1010 for a complete listing of
OD toolholders, ID boring bars, and inserts.
NOTE: Optimize your threading operation by using the proper infeed angle and
the recommended infeed values. See the Technical Section of Catalog 1010,
pages 677-678 and 683, for more details.
67
Top Notch Threading
®
Top Notch Thread Form Guide
• All Top Notch threading inserts are precision ground to
provide accurate edge location and secure locking of
the insert in the toolholder pocket.
• Top Notch threading and grooving inserts can be used
in either toolholders or boring bars.
• All non-cresting type threading inserts can be used
for either external or internal applications. All cresting
type inserts are designated specifically for external
or internal use.
• Right-hand Top Notch threading toolholders use
right-hand inserts. Left-hand Top Notch threading
toolholders use left-hand inserts.
• Right-hand Top Notch threading boring bars use
left-hand inserts. Left-hand Top Notch threading
boring bars use right-hand inserts.
left-hand
insert style
thread
form
rake
angle
cresting
60°V
UN
class 2
ISO
6g/6H
neutral
60°V
UN
class 2
ISO
6g/6H
tpi range
(pitch in mm)
right-hand
application
external
internal
no
none
12 - 24
(1,00 - 2,00)
internal threading in small diameter bores
• used with boring bars only
• one cutting edge
neutral
no
size 2 = 8 - 36
(0,70 - 3,00)
size 3 = 6 - 20
(1,25 - 4,00)
size 2 = 7 - 20
(1,25 - 3,50)
size 3 = 5 - 12
(2,00 - 5,00)
general purpose
• a popular threading insert style
for general use
• provides satisfactory performance
in most applications
60°V
UN
class 2
ISO
6g/6H
5°
positive
no
size 2 = 8 - 36
(0,70 - 3,00)
size 3 = 6 - 20
(1,25 - 4,00)
size 2 = 7 - 20
(1,25 - 3,50)
size 3 = 5 - 12
(2,00 - 5,00)
general purpose
• ground positive rake
reduces cutting forces
• recommended for
threading aluminum and
difficult-to-machine materials
60°V
UN
class 2
ISO
6g/6H
10°
positive
chip
control
no
size 2 = 8 - 36
(0,70 - 3,00)
size 3 = 6 - 20
(1,25 - 4,00)
size 2 = 7 - 20
(1,25 - 3,50)
size 3 = 5 - 12
(2,00 - 5,00)
general purpose with chip control
• threading insert with chip control
and positive cutting action
• especially helpful for
internal threading operations
60°V
UN
class 2
ISO
6g/6H
neutral
no
size 2 = 14 - 44
(0,60 - 1,75)
size 3 = 10 - 44
(0,60 - 2,50)
size 2 = 12 - 24
(1,00 - 2,00)
size 3 = 9 - 24
(1,00 - 2,50)
fine pitches, close to shoulder operations
• smaller nose radius than
general purpose inserts
• use this style insert only
when required for the operation
60° V
UN
class 2
ISO
6g/6H
5°
positive
no
size 2 = 14 - 44
(0,60 - 1,75)
size 3 = 10 - 44
(0,60 - 2,50)
size 2 = 12 - 24
(1,00 - 2,00)
size 3 = 9 - 24
(1,00 - 2,50)
fine pitches, close to shoulder operations
• smaller nose radius than general
purpose inserts
• use this insert only when required
for the operation
60° Partial Profile
NT-1L
page 72
NT
page 72
NTP
page 72
NT-K
page 73
NTF
page 73
NTK
page 73
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
68
Top Notch Threading
Top Notch Thread Form Guide (cont'd)
insert style
thread
form
rake
angle
cresting
60° V
UN
class 2
neutral
ISO
6g/6H
tpi range
(pitch in mm)
application
external
internal
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
cresting style for UN inch threads
• offers the best possible tool life for
the application
• produces the best surface finish, and
accurate thread depth
neutral
yes
each insert
produces a
specific pitch
each insert
produces a
specific pitch
cresting style for metric threads
• offers the best possible tool life for
the application
• produces the best surface finish and
accurate thread depth
60° V
UNJ
class 3
neutral
no
each insert
produces a
specific tpi
use a class 2
insert, then finish
bore the minor
diameter
UNJ external threads
• close tolerance on nose radius to control
thread root radius
• meets or exceeds SPEC MIL-S-8879C
60° V
UNJ
class 3
5°
positive
no
each insert
produces a
specific tpi
use a class 2
insert, then finish
bore the minor
diameter
UNJ external threads
thread root radius
60° V
UNJ
class 3
neutral
no
each insert
produces a
specific tpi
use a class 2
insert, then finish
bore the minor
diameter
UNJ external threads, fine pitches, close to shoulder
• close to shoulder applications
thread root radius
60° V
UNJ
class 3
5°
positive
no
each insert
produces a
specific tpi
use a class 2
insert, then finish
bore the minor
diameter
UNJ external threads, fine pitches, close to shoulder
• close to shoulder applications
thread root radius
60° American UN
NTC
page 74
60° ISO Metric
NTC
page 74
60° UNJ
NJ
page 75
NJP
page 75
NJF
page 75
NJK
page 75
69
Top Notch Threading
®
Top Notch Thread Form Guide
insert
style
thread
form
rake
angle
cresting
60° V
NPT
neutral
55° V
—
tpi range
(pitch in mm)
application
external
internal
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
national pipe threads
• offers the best possible tool life
for the application
• produces the best surface
finish, and accurate thread depth
• for tapered threads where
fluid tightness is required
neutral
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
Whitworth
• offers the best possible tool life
for the application
• produces the best surface
finish, and accurate thread depth
—
—
—
—
60° NPT/NPTF
NDC-V
page 76
55° Whitworth for BSW, BSP
NWC
page 76
Specials
Catalog 1010,
(A01-44)
page 191
made to your order
• let our expert design team and
manufacturing personnel make the
insert required for your application,
including special API thread forms.
Special Top Notch Threading Inserts
Kennametal high-performance carbide grades, coupled with our rigid
Top Notch clamping design, offer the metalworking industry optimum
threading productivity.
When Kennametal’s large inventory of standard products doesn’t completely
satisfy your productivity requirements, consider having Top Notch threading
inserts custom ground to meet your unique application needs.
The large variety of Top Notch blank sizes allows maximum flexibility in
threading endform design, especially for extra wide or oil field applications.
Common examples of special forms are shown in Catalog 1010 on
page 191. Please contact your local Kennametal representative for
recommendations on satisfying your special threading needs.
70
Features/Benefits:
• Quotes are handled quickly and efficiently using state-of-the-art CAD
design software and electronic database software.
• Our Carbide Specials Design Team is your link to one of the industry’s
largest electronic data bases. They can solve your most challenging
design problems.
• When required, concept drawings are available to facilitate your
engineering development.
• A large number of high-performance carbide grades are available to
optimize your productivity. The option of producing standard insert
styles in non-standard carbide grades allows you to optimize tool life
performance.
Kennametal Threading Systems
Top Notch Threading Insert Identification System
3.
Additional
Information
1.
Type of Insert
B
F
S
C
P
K
U
N — Top Notch
—
—
—
—
—
—
—
5.
Industry Thread
Identification
Position indicates API or
"drilling industry "(e.g.—10RD,
8RD, .038)
or
Controlled root radius threading
inserts indicate the root radius
in .001 increments
(NJ, NJF, NJP, NJK).
Buttress
fine pitch
Stub Acme
cresting
positive rake
fine pitch, positive
utility**
N J F – 3
2.
Insert Style
A
B
D
J
T
U
W
—
—
—
—
—
—
—
▫▫▫
4.
Insert Size
Acme
blank (special forms)
API or NPT
UNJ thread
60° V thread
undercutting or relieving
55° V Whitworth
7.
Definition of
Insert
• threads per inch
or pitch (for metric)
• “A” or “B” type
Buttress insert
• taper per foot—
API threads
R 12
6.
Hand of Insert
R — right
L — left
insert
number
1
2
3
4
5
6
8
* Kennametal proprietary standard only.
** Utility threading inserts can only be used in
NSUR/L utility holders.
s
.100
.150
.195
.255
.380
.383
.438
▫
8.
Additional
Information
I
E
— internal thread
— external thread
(used only if internal
and external thread
forms are different)
M — multiple tooth
K — standard chip control
C — coarse pitch
D — Dry Seal
Top Notch Threading and Grooving
Insert Dimensions
insert
size
a
NJF
NTC
NT
NT-K
s
inch
mm
inch
mm
1
.100
2,54
.100
2,54
2
.219
5,56
.150
3,81
3
.344
8,74
.195
4,95
4
.453
11,51
.255
6,48
5
.688
17,48
.380
9,65
6
.453
11,51
.383
9,73
8
.312
7,93
.438
11,13
71
Top Notch Threading Inserts
®
NT-1L
—
mm
ext.
int.
ext.
.002
.004
0,05
0,10
.047
.043
1,19
1,09
—
(1,0-2,0)
—
NT-2L
.003
.005
0,08
0,13
.075
1,91
(0,70-3,0) (1,25-3,5)
8-36
7-20
NT-3L
.005
.008
0,13
0,20
.098
2,49
(1,25-4,0)
(2,0-5,0)
6-20
5-12
NTP-2L
.003
.005
0,08
0,13
.075
1,91
(0,70-3,0) (1,25-3,5)
8-36
7-20
NTP-3L
.005
.008
0,13
0,20
.098
2,49
(1,25-4,0)
6-20
5-12
NT-1L
NT-2R
NTP-2R
NTP-3R
... High-performance choice under optimal conditions
... First choice for general machining conditions
... Preferred choice for unfavorable conditions
* rε and e dimensions are ±.001 in. (±0,025 mm) unless otherwise noted.
72
(2,0-5,0)
steel
stainless steel
non-ferrous
high-temp alloys
int.
12-24 KC5025
inch
KC5410
mm
NT-3R
NTP
tpi
inch
one cutting edge
NT
grades
pitch (mm)
KC5010
left hand
e*
K68
right hand
dimensions
rε*
K313
insert catalog number
inch
mm
NT-2LK
.003
.005
0,08
0,13
.075
1,91
NT-3LK
.005
.008
0,13
0,20
.098
NTF-2L
.002
.004
0,05
0,10
NTF-3L
.002
.004
NTK-2L
NTK-3L
NT-3RK
NTF
NTF-2R
NTF-3R
NTK
NTK-2R
NTK-3R
ext.
int.
(0,70-3,0) (1,25-3,5)
8-36
7-20
2,49
(1,25-4,0)
(2,0-5,0)
6-20
5-12
.110
2,79
(0,6-1,75)
(1,0-2,0)
14-44 12-24 0,05
0,10
.141
3,58
(0,6-2,5)
(1,0-2,5)
10-44
.002
.004
0,05
0,10
.110
2,79
(0,6-1,75)
(1,0-2,0)
14-44 12-24 .002
.004
0,05
0,10
.141
3,58
(0,6-2,5)
(1,0-2,5)
10-44
ext.
int.
9-24
9-24
KC5025
mm
tpi
KC5410
inch
NT-2RK
grades
pitch (mm)
KC5010
NT-K
left hand
e*
K68
right hand
dimensions
rε*
K313
steel
stainless steel
non-ferrous
high-temp alloys
73
®
NTC
NTC-3R7E
—
NTC-3R8E
NTC-3L8E
NTC-3R8I
NTC-3L8I
NTC-3R9E
—
NTC-3R10E
NTC-3L10E
NTC-3R10I
NTC-3L10I
NTC-3R11E
—
NTC-3R12E
NTC-3L12E
NTC-3R12I
NTC-3L12I
NTC-3R13E
—
NTC-3R14E
NTC-3L14E
NTC-3R14I
NTC-3L14I
NTC-3R16E
NTC-3L16E
NTC-3R16I
NTC-3L16I
NTC-3R18E
NTC-3L18E
NTC-3R20E
NTC-3L20E
NTC
mm
inch
mm
ext.
int.
ext.
int.
.0186
0,43
.107
2,72
—
—
7
—
.0150
0,38
.107
2,72
—
—
8
—
.0070
0,18
.107
2,72
—
—
—
8
.0140
0,33
.107
2,72
—
—
9
—
.0124
0,30
.107
2,72
—
—
10
—
.0052
0,13
.107
2,72
—
—
—
10
.0110
0,28
.107
2,72
—
—
11
—
.0100
0,25
.148
3,76
—
—
12
—
.0040
0,10
.148
3,76
—
—
—
12
.0096
0,23
.148
3,76
—
—
13
—
.0088
0,23
.148
3,76
—
—
14
—
.0037
0,08
.148
3,76
—
—
—
14
.0075
0,20
.148
3,76
—
—
16
—
.0030
0,08
.148
3,76
—
—
—
16
.0070
0,18
.148
3,76
—
—
18
—
.0062
0,15
.148
3,76
—
—
20
—
KC5025
inch
—
.0060
.0045
0,15
0,11
.148
3,76
—
—
24
—
NTC-3R28E
—
.0052
.0039
0,13
0,10
.148
3,76
—
—
28
—
NTC-3R32E
—
.0045
.0034
0,11
0,09
.148
3,76
—
—
32
—
.0074
.0086
0,188
0,218
.145
3,68
(1,5)
—
—
—
.0031
0,079
.145
3,68
—
(1,5)
—
—
.0098
.0114
0,249
0,290
.145
3,68
(2,0)
—
—
—
.0038
0,096
.145
3,68
—
(2,0)
—
—
.0148
.0170
0,376
0,432
.114
2,90
(3,0)
—
—
—
.0053
0,135
.106
2,69
—
(3,0)
—
—
NTC-3MR150E
NTC-3ML150E
NTC-3MR150I
NTC-3ML150I
NTC-3MR200E
NTC-3ML200E
NTC-3MR200I
NTC-3ML200I
NTC-3MR300E
NTC-3ML300E
NTC-3MR300I
NTC-3ML300I
steel
stainless steel
non-ferrous
high-temp alloys
KC5410
tpi
NTC-3R24E
metric-ISO
74
grades
pitch (mm)
KC5010
left hand
e*
K68
right hand
dimensions
rε*
K313
mm
ext.
int.
ext.
int.
NJ-3020L8
.0188
.0198
0,478
0,503
.098
2,49
—
—
8
—
NJ-3014L12
.0125
.0135
0,318
0,343
.098
2,49
—
—
12
—
NJ-3010L16
.0094
.0104
0,239
0,264
.098
2,49
—
—
16
—
NJP-3020L8
.0188
.0198
0,478
0,503
.098
2,49
—
—
8
—
NJP-3014L12
.0125
.0135
0,318
0,343
.098
2,49
—
—
12
—
NJP-3010L16
.0094
.0104
0,239
0,264
.098
2,49
—
—
16
—
NJF-3012L14
.0107
.0117
0,272
0,297
.141
3,48
—
—
14
—
NJF-3010L16
.0094
.0104
0,239
0,264
.141
3,48
—
—
16
—
NJF-3009L18
.0083
.0093
0,211
0,236
.141
3,48
—
—
18
—
NJF-3008L20
.0075
.0085
0,190
0,216
.141
3,48
—
—
20
—
NJF-3007L24
.0063
.0073
0,160
0,185
.141
3,48
—
—
24
—
NJF-3006L28
.0054
.0064
0,137
0,163
.141
3,48
—
—
28
—
NJF-3005L32
.0047
.0056
0,119
0,142
.141
3,48
—
—
32
—
NJK-3012L14
.0107
.0117
0,272
0,297
.141
3,48
—
—
14
—
NJK-3010L16
.0094
.0104
0,239
0,264
.141
3,48
—
—
16
—
NJK-3009L18
.0083
.0093
0,211
0,236
.141
3,48
—
—
18
—
NJK-3008L20
.0075
.0085
0,190
0,216
.141
3,48
—
—
20
—
NJK-3007L24
.0063
.0073
0,160
0,185
.141
3,48
—
—
24
—
NJK-3006L28
.0054
.0064
0,137
0,163
.141
3,48
—
—
28
—
NJK-3005L32
.0047
.0056
0,119
1,142
.141
3,48
—
—
32
—
NJ-3020R8
NJP-3020R8
NJP-3014R12
NJP-3010R16
NJF-3012R14
NJF-3010R16
NJF-3009R18
NJF-3008R20
NJF-3007R24
NJF-3006R28
NJF-3005R32
NJK
NJK-3012R14
NJK-3010R16
NJK-3009R18
NJK-3008R20
NJK-3007R24
NJK-3006R28
NJK-3005R32
KC5025
inch
KC5410
mm
NJ-3010R16
NJF
tpi
inch
NJ-3014R12
NJP
grades
pitch (mm)
KC5010
NJ
left hand
e*
K68
right hand
dimensions
rε*
K313
steel
stainless steel
non-ferrous
high-temp alloys
75
®
NDC-V (NPT)
NDC-38VR-75
NDC-38VL-75
cresting-tapered pipe
NDC-3115VR-75
NDC-3115VL-75
NWC
2,54
.75
8
.144
3,66
.75
11.5
14
inch
mm
.005
0,13
.100
.004
0,10
NDC-314VR-75
—
.003
0,08
.144
3,66
.75
NDC-318VR-75
—
.003
0,08
.144.
3,66
.75
18
NDC-327VR-75
—
.002
0,05
.144
3,66
.75
27
.012
0,30
.151
3,84
—
.009
0,24
.161
4,08
—
11 ext.
11 int.
14 ext.
14 int.
NWC-3R11E
NWC-3L11I
NWC-3R14E
NWC-3L14I
76
steel
stainless steel
non-ferrous
high-temp alloys
KC5025
tpi
mm
KC5410
tpf
inch
KC5010
left hand
grades
e*
K68
right hand
dimensions
rε*
K313
LT Laydown
Threading Inserts
page
Inserts
KENNA PERFECT Selection . . . . . . . . . . .
78
LT Thread Form Guide . . . . . . . . . . . . . . . . . .
80
60°
55°
Partial Profile . . . . . . . . . . .
84
American UN . . . . . . . . . . . . .
86
ISO Metric . . . . . . . . . . . . . . . . .
88
UNJ . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90
NPT . . . . . . . . . . . . . . . . . . . . . . . . .
91
NPTF. . . . . . . . . . . . . . . . . . . . . . . . .
92
Partial Profile . . . . . . . . . . . . . . . . . . . . . .
93
Whitworth for BSW, BSP . . . . . . . . .
94
BSPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
96
77
KENNA PERFECT LT Threading System
LT Threading Productivity
Step 1:
Select threading method and hand of tooling.
■ external/internal
operation
■ spindle rotation
■ feed direction
standard helix – preferred method
L
R
L
L
R
R
L
R
reverse helix
L
L
L
L
R
R
R
R
Step 2:
Select insert.
■ hand of insert
■ thread form
catalog number
IC
LT-11NL-16UN
1/4"
LT-16NL-16UN
3/8"
KC5025
KC5010
(NOTE: Use the largest insert IC possible.)
◆ See thread form guide on pages 80-81.
◆ Select cresting inserts for fully controlled
thread form including diameter. Cresting inserts eliminate the need
for deburring and are optimized for the best tool life at that pitch.
◆ Non-cresting partial profile inserts offer the flexibility to cut a variety of thread pitches with one insert.
Step 3:
Select grade and speed.
■ workpiece material
■ operation
Recommendations for Grade and Speed Selections
threading
operation
external
stainless
steel
steel
general purpose
style
general purpose
style
general purpose
style
general purpose
style
KC5025
100-650 sfm
CB
KC5025
150-450 sfm
CB
KC5025
150-1,000 sfm
CB
KC5025
20-250 sfm
CB
high performance
internal
high-temp
alloys
non-ferrous
high performance
high performance
high performance
KC5010
150-650 sfm
CB
KC5010
200-650 sfm
CB
KC5010
250-1,300 sfm
CB
KC5010
80-400 sfm
CB
general purpose
style
general purpose
style
general purpose
style
general purpose
style
KC5025
100-550 sfm
CB
KC5025
150-350 sfm
CB
KC5025
150-800 sfm
CB
KC5025
20-200 sfm
CB
high performance
KC5010
150-550 sfm
high performance
CB
KC5010
200-550 sfm
high performance
CB
KC5010
250-1,100 sfm
high performance
CB
KC5010
80-325 sfm
CB-style chip control inserts are not available with some thread
forms. In those cases, flat top inserts can be substituted.
78
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of
CB
LT Threading Productivity (cont’d)
Step 4:
Select the toolholder.
■ external/internal operation
■ pitch diameter
(for internal operations)
■ hand of tool
■ insert IC
catalog number
gage insert
min. bore dia.
shim
S0812-LSEL2
LT-11NL
.65
—
S1212-LSEL3
LT-16NL
.90
SM-YE3
Step 5:
Select the shim.
■ helix method
If different from shim
supplied with toolholder,
order shim separately.
NOTE: Optimize your threading
operation by using the proper
infeed angle and the recommended
infeed values. Refer to the
Catalog 1010, Technical Section,
pages 677-678 and 683.
(reverse helix)
■ pitch diameter
(standard helix)
■ thread form (tpi or pitch)
Additional shim selection guidelines can be found in the threading Technical Data Section of Catalog 1010.
79
LT Thread Form Guide
®
• All LT inserts are precision ground to
• Non-cresting partial profile inserts offer
provide accurate thread forms and
indexing.
the flexibility to cut a variety of thread
pitches with one insert.
• Both cresting and non-cresting partial
• Right-hand LT toolholders use right-
profile inserts are specifically designed
for either external or internal threading
operations.
external
hand inserts. Left-hand LT toolholders
use left-hand inserts.
• Right-hand LT boring bars use right-
• CB-style inserts provide chip control
hand inserts. Left-hand LT boring bars
use left-hand inserts.
which is especially important in internal
operations where stringy chips can
accumulate and cause poor finish or
edge chipping.
internal
• Cresting inserts provide a fully
controlled thread form including
diameter for a given pitch. The need
for deburring is eliminated and the
inserts are optimized for the best tool
life at that pitch.
insert
style
right-hand inserts
left-hand inserts
tpi range (pitch in mm)
thread form
rake angle
cresting
60° V UN
class 2
ISO 6g/6H
2°
positive
no
size 16 = 8 - 48
(0,5 - 3,00)
size 11 = 16 - 48
(0,5 - 1,5)
size 16 = 8 - 48
(0,5 - 3,0)
general purpose with chip control
• flexible form capability with chip control
• superior performance in internal threading operations
60° V UN
class 2
ISO 6g/6H
2°
positive
no
size 16 = 8 - 48
(0,5 - 3,00)
size 11 = 16 - 48
(0,5 - 1,5)
size 16 = 8 - 48
(0,5 - 3,0)
general purpose
• flexible form capability makes this insert a popular choice for
general use
• provides satisfactory performance in most applications
60° V UN
class 2
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
60° V UN
class 2
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
external
application
internal
LT-60CB
pages 84-85
LT-60
pages 84-85
60° American UN
LT-UNCB
cresting style with chip control for UN inch threads
offers the best possible tool life and chip control for the application
produces a high-quality surface finish and accurate thread depth
chip control capability makes this a first choice for internal threading
operations
•
•
•
pages 86-87
LT-UN
cresting style for UN inch threads
offers excellent tool life and surface finish, with accurate
thread depth
•
pages 86-87
80
LT Threading Inserts
insert
style
thread form
rake angle
cresting
ISO
6g/6H
2°
positive
ISO
6g/6H
60° V
UNJ class
3 (3A/3B)
application
external
internal
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
•
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
•
60° V
NPT
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
60° V
NPT
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
60° V
NPTF
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
60° V
NPTF
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
60° ISO Metric
LT-ISOCB
cresting style with chip control for ISO metric threads
• offers the best possible tool life and chip control for the application
• produces a high-quality surface finish and accurate thread depth
• best for internal threading operations
pages 88-89
LT-ISO
cresting style for ISO metric threads
thread depth
pages 88-89
60° UNJ
LT-UNJ
cresting style for UNJ threads
accurate radius and thread form control for excellent tool life
and high-quality threads
• meets or exceeds SPEC MIL S-8879C
page 90
60° National Pipe Threads
LT-NPTCB
page 91
LT-NPT
for National Pipe Threads with chip control
• offers the best possible tool life with accurate thread depth control
• chip control geometry helps manage chips and maintains a
high-quality, unmarred surface finish
• for tapered threads where fluid tightness is required
National Pipe Threads
thread depth
• for tapered threads where fluid tightness is required
•
page 91
LT-NPTFCB
for National Pipe Threads-Dry Seal with chip control
offers the best tool life with accurate thread depth control
chip control geometry helps manage chips and maintains a
high-quality, unmarred surface finish
• for tapered Dry Seal threads
•
•
page 92
LT-NPTF
National Pipe Threads-Dry Seal
thread depth
• for tapered Dry Seal threads
•
page 92
81
®
LT Thread Form Guide
insert
style
thread form
rake angle
cresting
2°
positive
no
size 16 = 8 - 48
(0,5 - 3,00)
size 11 = 16 - 48
(0,5 - 1,5)
size 16 = 8 - 48
(0,5 - 3,0)
55° V
Whitworth
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
55° V
Whitworth
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
55° V
BSPT
2°
positive
yes
each insert
produces a
specific tpi
each insert
produces a
specific tpi
external
application
internal
LT-55
55° V
general purpose for 55° thread forms
• wide flexibility to produce a variety of pitches
• provides satisfactory performance in most applications
page 93
55° Whitworth for BSW, BSP
LT-WCB
cresting style with chip control for Whitworth threads
offers the best possible tool life and chip control for the application
produces a high-quality surface finish and accurate thread depth
best for internal threading operations
•
•
•
pages 94-95
LT-W
cresting style for Whitworth threads
offers excellent tool life and surface finish, with accurate thread depth
•
pages 94-95
55° BSPT
LT-BSPT
cresting style for British Standard Pipe Threads
offers excellent tool life and surface finish, with accurate thread depth
for tapered threads where fluid tightness is required
•
•
page 96
In all cases, remember, the proper shim selection is important!
Kennametal toolholders are supplied with a shim for a 1.5° lead
angle. Change the shim if your thread is more than 1° different.
A complete listing of available shims can be found in both the LT
toolholder and LT boring bar section of the catalog. For more details
on proper shim selection, see the KENNA PERFECT guide at the
beginning of this section or the Technical Data section on threading
in Catalog 1010.
82
Kennametal Threading Systems
LT Threading Insert Identification System
5.
Thread Profile
1.
Type of Insert
ISO
UN
60
55
W
BSPT
NPT
ACME
STACME
TR
RD
UNJ
NPTF
API
BUT
3.
Hand of Insert
laydown threading
ER
EL
NR
NL
—
—
—
—
external right hand
external left hand
internal right hand
internal left hand
— ISO metric
— American UN
— Partial Profile non-cresting 60°
— Partial Profile non cresting 55°
— Whitworth 55°
— British Standard Pipe Thread
— American National Pipe Thread
— American Acme
— American Stub Acme
— Trapez DIN 103
— Round DIN 405
— Controlled root radius
— Dry Seal
— American Petroleum Institute Threads
— API Buttress Casing
LT – 16 ER – 20 UN CB
2.
Cutting Edge
Length (Size)
6.
Chip Control
4.
Thread Pitch
partial profile
l-size
(mm)
d
(inch)
22
16
11
1/2
3/8
1/4
designation
thread pitch
(mm)
tpi
A
AG
G
N
0,5 - 1,5
0,5 - 3,0
1,75 - 3,0
3,5 - 5,0
48 - 16
48 - 8
14 - 8
7-5
CB — chipbreaker
□ — flat top
full profile
actual tpi or
0,5 - 4,0
pitch in mm
(metric forms)
is designated
48 - 8
The Kennametal
LT Advantage:
Every box of 10 inserts includes a
Torx wrench and locking screw.
83
®
Partial Profile 60° — External
LT-ER/L-60
LT-16ER-AG60CB
—
LT-16ER-A60
LT-16EL-A60
LT-16ER-AG60
LT-16EL-AG60
LT-16ER-G60
LT-16EL-G60
d
tpi
inch
(mm)
0,5 - 3,0
.003
.002
.002
.003
.003
.011
.011
3/8
48-8
3/8
3/8
3/8
3/8
3/8
3/8
48-16 0,5 - 1,5
48-16 0,5 - 1,5
48-8 0,5 - 3,0
48-8 0,5 - 3,0
14-8 1,75 - 3,0
14-8 1,75 - 3,0
84
l
s
d1
x
y
KC5025
LT-ER-60CB
left hand
grades
KC5010
right hand
nose radius
rε
thread
pitch
(mm)
0,08
.650
.143
.155
.035
.059
0,05
0,05
0,08
0,08
0,27
0,27
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.031
.031
.047
.047
.047
.047
.035
.035
.067
.067
.067
.067
steel
stainless steel
non-ferrous
high-temp alloys
Partial Profile 60° — Internal
LT-NR-60CB
LT-NR/L-60
nose radius
rε
thread
pitch
(mm)
inch
(mm)
grades
l
s
d1
x
y
KC5025
left hand
tpi
KC5010
right hand
d
LT-11NR-A60CB
—
1/4
48-16
0,5 - 1,5
.002
0,05
.433
.126
.128
.024
.031
LT-16NR-AG60CB
LT-16NR-G60CB
—
—
3/8
3/8
48-8
14-8
0,5 - 3,0
1,75 - 3,0
.002
.006
0,05
0,16
.650
.650
.143
.143
.155
.155
.035
.043
.059
.059
1/4
1/4
48-16
48-16
0,5 - 1,5
0,5 - 1,5
.002
.002
0,05
0,05
.433
.433
.126
.126
.128
.128
.031
.031
.035
.035
LT-11NL-A60
3/8
3/8
3/8
3/8
3/8
3/8
48-16 0,5 - 1,5
48-16 0,5 - 1,5
48-8 0,5 - 3,0
48-8 0,5 - 3,0
14-8 1,75 - 3,0
14-8 1,75 - 3,0
.002
.002
.002
.002
.006
.006
0,05
0,05
0,05
0,05
0,16
0,16
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.031
.031
.047
.047
.047
.047
.035
.035
.067
.067
.067
.067
LT-11NR-A60
LT-16NR-A60
LT-16NL-A60
LT-16NR-AG60
LT-16NL-AG60
LT-16NR-G60
LT-16NL-G60
steel
stainless steel
non-ferrous
high-temp alloys
85
®
American UN — External
Standard:
ANSI B1.1:74
Tolerance Class:
2A/2B
right hand
left hand
d
tpi
l
s
d1
x
y
hmin
KC5025
KC5010
grades
LT-ER-UNCB
LT-16ER-32UNCB
LT-16ER-28UNCB
LT-16ER-24UNCB
LT-16ER-20UNCB
LT-16ER-18UNCB
LT-16ER-16UNCB
LT-16ER-14UNCB
LT-16ER-12UNCB
LT-16ER-10UNCB
LT-16ER-8UNCB
—
—
—
—
—
—
—
—
—
—
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
32
28
24
20
18
16
14
12
10
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.047
.028
.028
.028
.028
.028
.047
.047
.047
.051
.020
.031
.031
.031
.031
.031
.059
.059
.059
.059
.019
.022
.026
.031
.034
.038
.044
.051
.061
.077
LT-ER/L-UN
LT-16ER-48UN
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
48
48
40
40
36
36
32
32
28
28
24
24
20
20
18
18
16
16
14
14
12
12
10
10
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.043
.043
.047
.047
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.055
.055
.059
.059
.063
.063
.013
.013
.015
.015
.017
.017
.019
.019
.022
.022
.026
.026
.031
.031
.034
.034
.038
.038
.044
.044
.051
.051
.061
.061
.077
.077
LT-16EL-48UN
LT-16ER-40UN
LT-16EL-40UN
LT-16ER-36UN
LT-16EL-36UN
LT-16ER-32UN
LT-16EL-32UN
LT-16ER-28UN
LT-16EL-28UN
LT-16ER-24UN
LT-16EL-24UN
LT-16ER-20UN
LT-16EL-20UN
LT-16ER-18UN
LT-16EL-18UN
LT-16ER-16UN
LT-16EL-16UN
LT-16ER-14UN
LT-16EL-14UN
LT-16ER-12UN
LT-16EL-12UN
LT-16ER-10UN
LT-16EL-10UN
LT-16ER-8UN
LT-16EL-8UN
86
steel
stainless steel
non-ferrous
high-temp alloys
American UN — Internal
Standard:
ANSI B1.1:74
Tolerance Class:
2A/2B
d
tpi
l
s
d1
x
y
hmin
LT-11NR-36UNCB
LT-11NR-32UNCB
LT-11NR-28UNCB
LT-11NR-24UNCB
LT-11NR-20UNCB
LT-11NR-18UNCB
LT-11NR-16UNCB
—
—
—
—
—
—
—
1/4
1/4
1/4
1/4
1/4
1/4
1/4
36
32
28
24
20
18
16
.433
.433
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.128
.128
.047
.047
.028
.028
.028
.028
.028
.020
.020
.031
.031
.031
.031
.031
.016
.018
.020
.024
.029
.032
.036
LT-16NR-20UNCB
LT-16NR-18UNCB
LT-16NR-16UNCB
LT-16NR-14UNCB
LT-16NR-12UNCB
LT-16NR-10UNCB
LT-16NR-8UNCB
—
—
—
—
—
—
—
3/8
3/8
3/8
3/8
3/8
3/8
3/8
20
18
16
14
12
10
8
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.028
.028
.028
.047
.047
.047
.051
.031
.031
.031
.059
.059
.059
.059
.029
.032
.036
.041
.048
.058
.072
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
44
44
40
40
36
36
32
32
28
28
24
24
20
20
18
18
16
16
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.024
.024
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.031
.031
.035
.035
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.035
.035
.039
.039
.043
.043
.013
.013
.015
.015
.016
.016
.018
.018
.021
.021
.024
.024
.029
.029
.032
.032
.036
.036
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
48
48
40
40
36
36
32
32
28
28
24
24
20
20
18
18
16
16
14
14
12
12
10
10
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.031
.031
.035
.035
.035
.035
.043
.043
.043
.043
.043
.043
.024
.024
.024
.024
.024
.024
.024
.024
.027
.027
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.055
.055
.059
.059
.059
.059
.012
.012
.015
.015
.016
.016
.020
.020
.020
.020
.024
.024
.029
.029
.032
.032
.036
.036
.041
.041
.048
.048
.058
.058
.072
.072
right hand
LT-NR-UNCB
LT-NR/L-UN
LT-11NR-44UN
LT-11NL-44UN
LT-11NR-40UN
LT-11NL-40UN
LT-11NR-36UN
LT-11NL-36UN
LT-11NR-32UN
LT-11NL-32UN
LT-11NR-28UN
LT-11NL-28UN
LT-11NR-24UN
LT-11NL-24UN
LT-11NR-20UN
LT-11NL-20UN
LT-11NR-18UN
LT-11NL-18UN
LT-11NR-16UN
LT-11NL-16UN
LT-16NR-48UN
LT-16NL-48UN
LT-16NR-40UN
LT-16NL-40UN
LT-16NR-36UN
LT-16NL-36UN
LT-16NR-32UN
LT-16NL-32UN
LT-16NR-28UN
LT-16NL-28UN
LT-16NR-24UN
LT-16NL-24UN
LT-16NR-20UN
LT-16NL-20UN
LT-16NR-18UN
LT-16NL-18UN
LT-16NR-16UN
LT-16NL-16UN
LT-16NR-14UN
LT-16NL-14UN
LT-16NR-12UN
LT-16NL-12UN
LT-16NR-10UN
LT-16NL-10UN
LT-16NR-8UN
LT-16NL-8UN
KC5010
left hand
KC5025
grades
steel
stainless steel
non-ferrous
high-temp alloys
87
®
ISO Metric — External
Standard:
R262 (DIN 13)
Tolerance Class:
6g/6H
right hand
left hand
d
KC5025
KC5010
grades
thread
pitch
(mm)
LT-ER-ISOCB
LT-16ER-0.5ISOCB
LT-16ER-0.75ISOCB
LT-16ER-1.0ISOCB
LT-16ER-1.25ISOCB
LT-16ER-1.5ISOCB
LT-16ER-1.75ISOCB
LT-16ER-2.0ISOCB
LT-16ER-2.5ISOCB
LT-16ER-3.0ISOCB
—
—
—
—
—
—
—
—
—
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
0,5
0,75
1,0
1,25
1,5
1,75
2,0
2,5
3,0
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.047
.047
.028
.043
.028
.047
.047
.047
.051
.024
.024
.031
.031
.031
.059
.059
.059
.059
.012
.018
.024
.030
.036
.042
.048
.060
.072
LT-ER/L-ISO
LT-16ER-0.5ISO
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
0,5
0,5
0,75
0,75
1,0
1,0
1,25
1,25
1,5
1,5
1,75
1,75
2,0
2,0
2,5
2,5
3,0
3,0
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.024
.024
.027
.027
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.024
.024
.024
.024
.027
.027
.035
.035
.039
.039
.047
.047
.051
.051
.059
.059
.063
.063
.012
.012
.018
.018
.024
.024
.030
.030
.036
.036
.042
.042
.048
.048
.060
.060
.072
.072
LT-16EL-0.5ISO
LT-16ER-0.75ISO
LT-16EL-0.75ISO
LT-16ER-1.0ISO
LT-16EL-1.0ISO
LT-16ER-1.25ISO
LT-16EL-1.25ISO
LT-16ER-1.5ISO
LT-16EL-1.5ISO
LT-16ER-1.75ISO
LT-16EL-1.75ISO
LT-16ER-2.0ISO
LT-16EL-2.0ISO
LT-16ER-2.5ISO
LT-16EL-2.5ISO
LT-16ER-3.0ISO
LT-16EL-3.0ISO
88
l
s
d1
x
y
hmin
steel
stainless steel
non-ferrous
high-temp alloys
ISO Metric — Internal
Standard:
R262 (DIN 13)
Tolerance Class:
6g/6H
LT-NR/L-ISO
left hand
d
LT-11NR-0.5ISOCB
LT-11NR-0.75ISOCB
LT-11NR-1.0ISOCB
LT-11NR-1.25ISOCB
LT-11NR-1.5ISOCB
—
—
—
—
—
1/4
1/4
1/4
1/4
1/4
0,5
0,75
1,0
1,25
1,5
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.047
.047
.028
.028
.028
.024
.024
.031
.031
.031
.012
.018
.024
.030
.036
LT-16NR-1.0ISOCB
LT-16NR-1.25ISOCB
LT-16NR-1.5ISOCB
LT-16NR-1.75ISOCB
LT-16NR-2.0ISOCB
LT-16NR-2.5ISOCB
—
—
—
—
—
—
3/8
3/8
3/8
3/8
3/8
3/8
1,0
1,25
1,5
1,75
2,0
2,5
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.028
.028
.028
.047
.047
.047
.031
.031
.031
.059
.059
.059
.024
.030
.036
.042
.048
.060
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
0,5
0,5
0,75
0,75
1,0
1,0
1,25
1,25
1,5
1,5
1,75
1,75
2,0
2,0
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.024
.024
.024
.024
.024
.024
.031
.031
.031
.031
.035
.035
.035
.035
.024
.024
.024
.024
.027
.027
.035
.035
.039
.039
.043
.043
.043
.043
.012
.012
.018
.018
.024
.024
.030
.030
.036
.036
.042
.042
.048
.048
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
0,5
0,5
0,75
0,75
1,0
1,0
1,25
1,25
1,5
1,5
1,75
1,75
2,0
2,0
2,5
2,5
3,0
3,0
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.024
.024
.024
.024
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.043
.043
.024
.024
.024
.024
.027
.027
.035
.035
.039
.039
.047
.047
.051
.051
.059
.059
.059
.059
.012
.012
.018
.018
.024
.024
.030
.030
.036
.036
.042
.042
.048
.048
.060
.060
.072
.072
LT-11NR-0.5ISO
LT-11NL-0.5ISO
LT-11NR-0.75ISO
LT-11NL-0.75ISO
LT-11NR-1.0ISO
LT-11NL-1.0ISO
LT-11NR-1.25ISO
LT-11NL-1.25ISO
LT-11NR-1.5ISO
LT-11NL-1.5ISO
LT-11NR-1.75ISO
LT-11NL-1.75ISO
LT-11NR-2.0ISO
LT-11NL-2.0ISO
LT-16NR-0.5ISO
LT-16NL-0.5ISO
LT-16NR-0.75ISO
LT-16NL-0.75ISO
LT-16NR-1.0ISO
LT-16NL-1.0ISO
LT-16NR-1.25ISO
LT-16NL-1.25ISO
LT-16NR-1.5ISO
LT-16NL-1.5ISO
LT-16NR-1.75ISO
LT-16NL-1.75ISO
LT-16NR-2.0ISO
LT-16NL-2.0ISO
LT-16NR-2.5ISO
LT-16NL-2.5ISO
LT-16NR-3.0ISO
LT-16NL-3.0ISO
l
s
d1
x
y
hmin
KC5010
right hand
KC5025
LT-NR-ISOCB
grades
thread
pitch
(mm)
steel
stainless steel
non-ferrous
high-temp alloys
89
®
UNJ — External
Standard:
MIL-S-8879C
Tolerance Class:
3A/3B
tpi
l
s
d1
x
y
hmin
KC5025
LT-ER/L-UNJ
d
LT-16EL-8UNJ
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
32
32
28
28
24
24
20
20
18
18
16
16
14
14
12
12
10
10
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.027
.027
.027
.027
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.047
.047
.027
.027
.027
.027
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.051
.051
.059
.059
.063
.063
.018
.018
.020
.020
.024
.024
.029
.029
.032
.032
.036
.036
.041
.041
.048
.048
.058
.058
.072
.072
left hand
d
tpi
l
s
d1
x
y
hmin
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
20
20
18
18
16
16
14
14
.433
.433
.433
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.128
.128
.128
.031
.031
.031
.031
.035
.035
.035
.035
.035
.035
.039
.039
.043
.043
.047
.047
.029
.029
.032
.032
.036
.036
.041
.041
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
32
32
28
28
24
24
20
20
18
18
16
16
14
14
12
12
10
10
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.028
.028
.028
.028
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.047
.047
.028
.028
.028
.028
.031
.031
.035
.035
.039
.039
.043
.043
.047
.047
.051
.051
.059
.059
.063
.063
.018
.018
.020
.020
.024
.024
.029
.029
.032
.032
.036
.036
.041
.041
.048
.048
.058
.058
.072
.072
left hand
LT-16ER-32UNJ
LT-16EL-32UNJ
LT-16ER-28UNJ
LT-16EL-28UNJ
LT-16ER-24UNJ
LT-16EL-24UNJ
LT-16ER-20UNJ
LT-16EL-20UNJ
LT-16ER-18UNJ
LT-16EL-18UNJ
LT-16ER-16UNJ
LT-16EL-16UNJ
LT-16ER-14UNJ
LT-16EL-14UNJ
LT-16ER-12UNJ
LT-16EL-12UNJ
LT-16ER-10UNJ
LT-16EL-10UNJ
LT-16ER-8UNJ
KC5010
right hand
KC5025
grades
UNJ — Internal
LT-NR/L-UNJ
LT11NR20UNJ
LT11NL20UNJ
LT11NR18UNJ
LT11NL18UNJ
LT11NR16UNJ
LT11NL16UNJ
LT11NR14UNJ
LT11NL14UNJ
LT16NR32UNJ
LT16NL32UNJ
LT16NR28UNJ
LT16NL28UNJ
LT16NR24UNJ
LT16NL24UNJ
LT16NR20UNJ
LT16NL20UNJ
LT16NR18UNJ
LT16NL18UNJ
LT16NR16UNJ
LT16NL16UNJ
LT16NR14UNJ
LT16NL14UNJ
LT16NR12UNJ
LT16NL12UNJ
LT16NR10UNJ
LT16NL10UNJ
LT16NR8UNJ
LT16NL8UNJ
90
steel
stainless steel
non-ferrous
high-temp alloys
KC5010
grades
right hand
NPT — External
Standard:
USAS B2.1:1968
Tolerance Class:
Standard NPT
LT-16ER-14NPTCB
LT-ER/L-NPT
LT-16ER-27NPT
tpi
KC5010
LT-ER-NPTCB
d
KC5025
right hand
grades
taper
per foot
(tpf)
3/8
14
.75
.650
.143
.155
.047
.059
.052
LT-16EL-8NPT
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
27
27
18
18
14
14
11.5
11.5
8
8
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.027
.027
.031
.031
.035
.035
.043
.043
.051
.051
.031
.031
.039
.039
.047
.047
.059
.059
.071
.071
.026
.026
.040
.040
.052
.052
.065
.065
.095
.095
left hand
d
tpi
taper
per foot
(tpf)
l
s
d1
x
y
hmin
3/8
3/8
14
11.5
.75
.75
.650
.650
.143
.143
.155
.155
.043
.039
.059
.059
.052
.065
1/4
1/4
1/4
1/4
1/4
1/4
27
27
18
18
14
14
.75
.75
.75
.75
.75
.75
.433
.433
.433
.433
.433
.433
.126
.126
.126
.126
.126
.126
.128
.128
.128
.128
.128
.128
.027
.027
.031
.031
.031
.031
.031
.031
.039
.039
.039
.039
.026
.026
.040
.040
.052
.052
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
27
27
18
18
14
14
11.5
11.5
8
8
.75
.75
.75
.75
.75
.75
.75
.75
.75
.75
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.027
.027
.031
.031
.035
.035
.043
.043
.051
.051
.031
.031
.039
.039
.047
.047
.059
.059
.071
.071
.026
.026
.040
.040
.052
.052
.065
.065
.095
.095
left hand
—
LT-16EL-27NPT
LT-16ER-18NPT
LT-16EL-18NPT
LT-16ER-14NPT
LT-16EL-14NPT
LT-16ER-11.5NPT
LT-16EL-11.5NPT
LT-16ER-8NPT
l
s
d1
x
y
hmin
NPT — Internal
LT-NR-NPTCB
LT-16NR-14NPTCB
LT-16NR-11.5NPTCB
LT-NR/L-NPT
LT-11NR-27NPT
—
—
LT-11NL-27NPT
LT-11NR-18NPT
LT-11NL-18NPT
LT-11NR-14NPT
LT-11NL-14NPT
LT-16NR-27NPT
LT-16NL-27NPT
LT-16NR-18NPT
LT-16NL-18NPT
LT-16NR-14NPT
LT-16NL-14NPT
LT-16NR-11.5NPT
LT-16NL-11.5NPT
LT-16NR-8NPT
LT-16NL-8NPT
KC5010
grades
KC5025
right hand
steel
stainless steel
non-ferrous
high-temp alloys
91
®
NPTF — External
Standard:
ANSI B1.20.3-1976
Tolerance Class:
Class 2
left hand
d
tpi
taper
per foot
(tpf)
l
s
d1
x
y
hmin
KC5025
KC5010
LT-ER-NPTFCB
LT-16ER-11.5NPTFCB
—
3/8
11.5
.75
.650
.143
.155
.043
.059
.064
LT-ER/L-NPTF
LT-16ER-14NPTF
3/8
3/8
3/8
3/8
14
14
11.5
11.5
.75
.75
.75
.75
.650
.650
.650
.650
.143
.143
.143
.143
.155
.155
.155
.155
.035
.035
.043
.043
.047
.047
.059
.059
.053
.053
.453
.453
l
s
d1
x
y
hmin
KC5025
grades
right hand
LT-16EL-14NPTF
LT-16ER-11.5NPTF
LT-16EL-11.5NPTF
NPTF — Internal
LT-NR/L-NPTF
left hand
d
tpi
LT-11NL-14NPTF
1/4
1/4
14
14
.75
.75
.433
.433
.126
.126
.128
.128
.031
.031
.039
.039
.053
.053
3/8
3/8
3/8
3/8
14
14
11.5
11.5
.75
.75
.75
.75
.650
.650
.650
.650
.143
.143
.143
.143
.155
.155
.155
.155
.035
.035
.043
.043
.047
.047
.059
.059
.053
.053
.064
.064
LT-11NR-14NPTF
LT-16NR-14NPTF
LT-16NL-14NPTF
LT-16NR-11.5NPTF
LT-16NL-11.5NPTF
92
steel
stainless steel
non-ferrous
high-temp alloys
KC5010
right hand
grades
taper
per foot
(tpf)
Partial Profile 55° — External
LT-ER/L- 55
LT-16ER-A55
LT-16EL-A55
LT-16ER-AG55
LT-16EL-AG55
LT-16ER-G55
LT-16EL-G55
d
3/8
3/8
3/8
3/8
3/8
3/8
tpi
thread
pitch
(mm)
48-16 0,5 - 1,5
48-16 0,5 - 1,5
48-8 0,5 - 3,0
48-8 0,5 - 3,0
14-8 1,75 - 3,0
14-8 1,75 - 3,0
nose radius
rε
inch
(mm)
.002
.002
.003
.003
.008
.008
0,05
0,05
0,07
0,07
0,21
0,21
grades
x
y
l
s
d1
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.031
.031
.047
.047
.047
.047
.035
.035
.067
.067
.067
.067
s
d1
x
y
KC5010
left hand
KC5025
right hand
Partial Profile 55° — Internal
LT-NR/L-55
LT-11NR-A55
LT-11NL-A55
LT-16NR-A55
LT-16NL-A55
LT-16NR-AG55
LT-16NL-AG55
LT-16NR-G55
LT-16NL-G55
d
tpi
inch
(mm)
l
1/4
1/4
48-16
48-16
0,5 - 1,5
0,5 - 1,5
.002
.002
0,05
0,05
.433
.433
.126 .128
.126 .128
.031 .035
.031 .035
3/8
3/8
3/8
3/8
3/8
3/8
48-16 0,5 - 1,5
48-16 0,5 - 1,5
48-8 0,5 - 3,0
48-8 0,5 - 3,0
14-8 1,75 - 3,0
14-8 1,75 - 3,0
.002
.002
.003
.003
.008
.008
0,05
0,05
0,07
0,07
0,21
0,21
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.031
.031
.047
.047
.047
.047
.155
.155
.155
.155
.155
.155
.035
.035
.067
.067
.067
.067
KC5010
left hand
grades
KC5025
right hand
nose radius
rε
thread
pitch
(mm)
steel
stainless steel
non-ferrous
high-temp alloys
93
®
Whitworth BSW, BSP — External
Standard:
B.S.84:1956, DIN 259,
ISO228/1:1982
Tolerance Class:
Medium Class A
LT-ER/L-W
d
tpi
l
s
d1
x
y
hmin
KC5025
LT-ER-WCB
left hand
KC5010
grades
right hand
LT-16ER-14WCB
LT-16ER-11WCB
—
—
3/8
3/8
14
11
.650
.650
.143
.143
.155
.155
.051
.051
.059
.059
.046
.058
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
28
28
24
24
20
20
19
19
18
18
16
16
14
14
12
12
11
11
10
10
9
9
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.024
.024
.028
.028
.031
.031
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.043
.043
.043
.043
.047
.047
.047
.047
.027
.027
.031
.031
.035
.035
.039
.039
.039
.039
.043
.043
.047
.047
.055
.055
.059
.059
.059
.059
.067
.067
.059
.059
.023
.023
.027
.027
.032
.032
.034
.034
.035
.035
.040
.040
.046
.046
.054
.054
.058
.058
.064
.064
.071
.071
.080
.080
LT-16ER-28W
LT-16EL-28W
LT-16ER-24W
LT-16EL-24W
LT-16ER-20W
LT-16EL-20W
LT-16ER-19W
LT-16EL-19W
LT-16ER-18W
LT-16EL-18W
LT-16ER-16W
LT-16EL-16W
LT-16ER-14W
LT-16EL-14W
LT-16ER-12W
LT-16EL-12W
LT-16ER-11W
LT-16EL-11W
LT-16ER-10W
LT-16EL-10W
LT-16ER-9W
LT-16EL-9W
LT-16ER-8W
LT-16EL-8W
94
steel
stainless steel
non-ferrous
high-temp alloys
Whitworth BSW, BSP — Internal
Standard:
B.S.84:1956, DIN 259,
ISO228/1:1982
Tolerance Class:
Medium Class A
LT-NR-WCB
LT-NR/L-W
left hand
d
tpi
l
s
d1
x
y
hmin
LT-16NR-14WCB
LT-16NR-11WCB
—
—
3/8
3/8
14
11
.650
.650
.143
.143
.155
.155
.051
.051
.059
.059
.046
.058
1/4
1/4
1/4
1/4
19
19
14
14
.433
.433
.433
.433
.126
.126
.126
.126
.128
.128
.128
.128
.031
.031
.035
.035
.039
.039
.043
.043
.034
.034
.046
.046
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
20
20
19
19
18
18
16
16
14
14
12
12
11
11
10
10
9
9
8
8
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.650
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.143
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.155
.031
.031
.031
.031
.031
.031
.035
.035
.039
.039
.043
.043
.043
.043
.043
.043
.047
.047
.047
.047
.035
.035
.039
.039
.039
.039
.043
.043
.047
.047
.055
.055
.059
.059
.059
.059
.067
.067
.059
.059
.032
.032
.034
.034
.035
.035
.040
.040
.046
.046
.054
.054
.058
.058
.064
.064
.071
.071
.080
.080
LT-11NR-19W
LT-11NL-19W
LT-11NR-14W
LT-11NL-14W
LT-16NR-20W
LT-16NL-20W
LT-16NR-19W
LT-16NL-19W
LT-16NR-18W
LT-16NL-18W
LT-16NR-16W
LT-16NL-16W
LT-16NR-14W
LT-16NL-14W
LT-16NR-12W
LT-16NL-12W
LT-16NR-11W
LT-16NL-11W
LT-16NR-10W
LT-16NL-10W
LT-16NR-9W
LT-16NL-9W
LT-16NR-8W
LT-16NL-8W
KC5010
right hand
KC5025
grades
steel
stainless steel
non-ferrous
high-temp alloys
95
®
BSPT — External
Standard:
B.S.21:1985
Tolerance Class:
Standard BSPT
LT-ER/L-BSPT
LT-16ER-14BSPT
LT-16EL-14BSPT
LT-16ER-11BSPT
LT-16EL-11BSPT
tpi
taper
per foot
(tpf)
l
s
d1
x
y
hmin
3/8
3/8
3/8
3/8
14
14
11
11
.75
.75
.75
.75
.650
.650
.650
.650
.143
.143
.143
.143
.155
.155
.155
.155
.039
.039
.043
.043
.047
.047
.059
.059
.046
.046
.058
.058
KC5025
grades
d
left hand
KC5010
right hand
steel
stainless steel
non-ferrous
high-temp alloys
BSPT — Internal
LT-NR/L-BSPT
tpi
taper
per foot
(tpf)
l
s
d1
x
y
hmin
LT-11NL-14BSPT
1/4
1/4
14
14
.75
.75
.433
.433
.126
.126
.128
.128
.035
.035
.039
.039
.046
.046
3/8
3/8
3/8
3/8
14
14
11
11
.75
.75
.75
.75
.650
.650
.650
.650
.143
.143
.143
.143
.155
.155
.155
.155
.039
.039
.043
.043
.047
.047
.059
.059
.046
.046
.058
.058
LT-11NR-14BSPT
LT-16NL-14BSPT
LT-16NR-11BSPT
LT-16NL-11BSPT
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of O.D. toolholders, I.D. boring bars and inserts.
steel
stainless steel
non-ferrous
high-temp alloys
KC5010
d
LT-16NR-14BSPT
96
grades
left hand
KC5025
right hand
Grooving Inserts
page
Top Notch Grooving. . . . . . . . . . . . . . . . .
KENNA PERFECT Selection Guide. . .
98
98
Grooving Application Guide . . . . . . . . . .
100
Insert ID System. . . . . . . . . . . . . . . . . . . . . .
103
Top Notch Grooving Inserts . . . . . . . . . . . . .
104
A3 Deep Grooving. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
111
KENNA PERFECT Selection Guide . . . . . . . . . .
111
Insert ID System . . . . . . . . . . . . . . . . . . . . . . . .
114
A3 Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
A2 Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
117
Top Notch Threading and Grooving Toolholders . . . . . . . . . . . . . . . .
Top Notch Threading and Grooving Boring Bars . . . . . . . . . . . . . . .
A3 Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grooving Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
............................................................
see page 172
see pages 190-193
see pages 174-175
see pages 697-704
in Catalog 1010
97
KENNA PERFECT
Top Notch Grooving
®
®
5 Easy Steps to Greater Productivity!
STEP 1:
Choose Top Notch for groove depths of 1.5 times the width or less.
For deep grooving, choose the A3 System on page 111.
STEP 2:
Choose your toolholder based on the application. Please note that holders
are available in conventional square shank as well as quick-change versions.
Take special note of the insert size based on the groove width.
■ For OD grooving and face grooving, see page 172.
■ For ID grooving applications, see pages 191-193.
STEP 3:
Select the proper chipbreaker and feed rate for the application and
material to be machined. See table below. Note for future reference.
A3
& Feed
TopChipbreakers
Notch Chipbreakers
and Rates
Feed Rates
workpiece
material
application
example
NG...
Grooving Inserts
stainless
steel
steel
– in/rev (mm/rev)
non-ferrous
high-temp
alloys
NG... K
NG... K
NGP...
NG... K
.003 - .011
(0,08 - 0,28)
.0025 - .008
(0,07 - 0,20)
.004 - .012
(0,01 - 0,30)
.0025 - .008
(0,07 - 0,20)
NG...
.004 - .012
(0,10 - 0,30)
NGP...
.004 - .009
(0,10 - 0,23)
NG... K
.003 - .012
(0,08 - 0,30)
NGP...
.004 - .008
(0,10 - 0,20)
NG...K
Grooving Inserts
NGP...
Grooving Inserts
NOTE: Refer to Lathe Tooling Catalog 1010 for a complete listing of OD toolholders,
ID boring bars, and inserts.
98
STEP 4:
Choose grade and speed based on the material
and cutting conditions to be encountered.
Recommendations for Grade and
Speed Selection – sfm (m/min)
workpiece material application example
machining condition
high-performance
for optimal conditions
(clean cuts, good
machine condition,
higher speed capability)
general purpose
(first choice for
general machining)
unfavorable conditions
(roughing, poor machine
condition, interrupted cuts,
low speed)
steel
stainless
steel
non-ferrous
high-temp
alloys
KC5010
200 - 650
(60 - 200)
KC5010
160 - 550
(50 - 170)
KC5410
590 - 2800
(180 - 850)
KC5010
50 - 360
(15 - 110)
KT315
330 - 750
(100 - 230)
KT315
230 - 560
(70 - 170)
KD100
600 - 5000
(180 - 1500)
KC5025
200 - 525
(60 - 160)
KC5025
160 - 400
(50 -120)
KC5010
500 - 2400
(150 - 730)
KC5025
35 - 200
(10 - 60)
KC5025
160 - 430
(50 - 130)
KC5025
130 - 300
(40 - 90)
KC5025
200 - 1000
(60 - 305)
KC5025
35 - 100
(10 - 30)
STEP 5:
Select insert and holder from catalog pages which meet the above criteria.
Note the insert size. Match the size to your toolholder selection.
For example:
Insert: . . . . . . NG-3125RK
Grade:. . . . . . KC5010
Width: . . . . . . .125
Insert Size: . . 3
Congratulations!
You have successfully maximized productivity by selecting the best Top Notch
grooving geometry, grade, and cutting specifications for your application, based
on the workpiece material.
99
Top Notch Grooving Inserts
®
Top Notch Grooving Application Guide
• All Top Notch grooving inserts are precision
ground to provide accurate edge location and
secure locking of the insert in the toolholder
pocket.
• Top Notch threading and grooving inserts can
be used in either toolholders or boring bars.
• Right-hand Top Notch grooving toolholders
use right-hand inserts. Left-hand Top Notch
grooving toolholders use left-hand inserts.
• Right-hand Top Notch grooving boring bars
use left-hand inserts. Left-hand Top Notch
grooving boring bars use right-hand inserts.
left-hand
insert
style
NG-K
application
rake
angle
standard groove
width range
right-hand
additional
information
• chip control geometry
• general purpose grooving
• o-ring grooving
• circlip grooving
• light turning
10°
positive
• o-ring grooving
neutral
size 1 = .031 to .094
size 2 = .031 to .125
size 3 = .047 to .189
•
•
popular general purpose grooving insert
inch and metric widths standard
• o-ring grooving
5°
positive
size 2 = .031 to .125
size 3 = .088 to .189
•
ground positive rake
reduces cutting forces
recommended for grooving aluminum
and difficult-to-machine materials
• deep grooving
• light turning
10°
positive
• deep grooving
neutral
size 3 = .189
•
•
deep grooving up to 1/2" deep
for customers who prefer to regrind
the width of the insert
10°
positive
radius size
size 3 = .031 to .078
•
excellent choice for plunge grooving,
turning, and profiling
chip control effective at higher
feed rates
size 2 = .031 to .128
size 3 = .039 to .189
•
•
•
inch and metric widths standard
chip control works well under a
variety of machining conditions
strong Top Notch design allows
light axial turning in two directions
pages 104-105
NG
pages 105-106
NGP
•
page 106
NGD-K
size 3 = .062 to .189
•
•
•
page 107
NGD
deep grooving up to 1/2" deep
chip control works well under a
variety of machining conditions
light axial turning in two directions
page 107
NR-K
•
page 107
100
insert
style
NR
rake
angle
standard groove
width range
• full radius end form
• general purpose profiling
neutral
radius size
size 2 = .031 to .062
size 3 = .031 to .094
•
•
a popular insert for full radius grooving
light turning and profiling in two directions
• full radius end form
• general purpose profiling
5°
positive
radius size
size 3 = .031 to .094
•
ground positive rake reduces
cutting forces
recommended for machining
aluminum and difficult-to-machine materials
• deep grooving
• full radius endform
neutral
• face grooving
neutral
application
additional
information
page 107
NRP
•
page 108
NRD
radius size
size 3 = .031 to .062
•
•
deep grooving with a full radius up
to 1/2" deep
light axial turning/profiling in two directions
page 108
NF
size 3 = .125 to .188
•
•
face grooving where extra side
clearance is required for small diameters
NG-style inserts may be used to
face groove large diameters
page 108
NF-K
• face grooving
with chip control
10°
positive
size 3 = .125 to .156
•
•
face grooving, with chip control,
where extra side clearance is required for
small diameters
NG-style inserts may be used to
face groove large diameters
page 108
NFD-K
• deep face grooving
with chip control
10°
positive
size 3 = .125
•
•
•
deep face grooving, with chip
control, up to 1/2" deep
use where extra side clearance is
required for small diameters
NGD-K style inserts may be used
to face groove large diameters
page 109
NFD-KI
• internal deep face grooving
with chip control
10°
positive
size 3 = .125 to .189
•
use in boring bars to generate
face grooves in the bottom of a bore
page 109
101
®
insert
style
NP-K
NPD-K
rake
angle
application
• turning
• backturning
• profiling with chip control
10°
positive
• undercutting
neutral
standard groove
width range
available in:
size 2
size 3
additional
information
•
•
designed for light turning, backturning,
profiling, and other operations with
chip control
usually applied on small automatic lathes
page 109
NU
size 3 = .094 to .156
•
•
designed to easily cut workpiece
grinding reliefs
requires the correct toolholder
page 110
NV
• Poly-Vee grooving
neutral
size 3 = J style
•
•
•
page 110
NB
• blanks
—
available in:
size 2
size 3
•
•
•
page 110
NBD
• blanks for deep grooving
—
available in:
size 2
size 3
•
•
•
standard inserts are used to
machine single grooves
special inserts are available to machine
multiple grooves with one insert
Top Notch rigidity is unsurpassed
in this type of operation
Top Notch blanks are available in
high quality Kennametal uncoated carbide
grades
use to make special insert forms in
your own shop
ground on top, bottom, and sides
use in making special inserts for
deep grooving applications
one cutting edge
rigid design
page 110
Special Top Notch Grooving Inserts
All Top Notch special inserts benefit
from the superior rigidity of our Top Notch
toolholder and clamping system. For
added productivity, most specials can be
incorpor-ated into the double-ended inserts.
All of our specials start with proven
Kennametal carbide grade technology as
the basis for optimizing tool performance.
special insert design. For convenience,
a concept drawing is always available
to facilitate engineering development of
an insert.
Positive top rake angles are also available
in most of our inserts. State-of-the-art
CAD allows rapid development of your
Kennametal offers NB- and NBD-style
insert blanks as well. These blanks can
be end form ground in your own shop.
102
There are limitless variations of the
flat-top Top Notch design. In addition, chip
control in the most common styles allows
true optimization and productivity.
Whatever your special grooving
requirements may be, Kennametal
can provide an effective solution. We
have the technical expertise, resources,
and commitment to help you develop
insert designs which satisfy your
metalcutting application demands.
Common examples of forms are shown in
Catalog 1010, page 239.
Top Notch Grooving Insert Identification System
1.
Type of Insert
5.
Metric
Identification
3.
Additional
Information
N — Top Notch
N*
D — deep grooving
P — positive
N G P 3
2.
Insert Style
B—
F—
G—
P—
R—
U—
V—
M — metric insert groove
width (position used
only for metric
products)
▫
* Kennametal proprietary identification system
** Omit position for Top Notch NB-style blanks.
L — left
R — right
125 R K
**6.
Insert Groove
Width
4.
Insert Size
blank (for special forms)
face grooving
grooving
backturning
full radius
undercutting (or relieving)
Poly Vee
7.
Hand of
Insert
insert
number
s(mm)
s(in.)
1
2
3
4
5
6
2,54
3,81
4,95
6,48
9,65
9,73
.100
.150
.195
.255
.380
.383
Position pertains to groove
width and radii for F, G, and
R-style grooving inserts
(0,01 mm/.001") increments.
Metric example: 3,25 mm
width groove or radius
equals “325” catalog
position number
Inch example: 1/32" groove
width or radius equals “031”
catalog position number
9.
Definition
of Insert
groove size “J ” or “ L” —
for Poly Vee inserts
▫
8.
Chipbreaker
Design
K — standard chip
control
Top Notch Holder Design
Top Notch Threading and Grooving Insert Dimensions
insert
size
1
2
3
4
5
6
8
a
NOTE: Holders are designed to locate insert inclined to
3° to provide back clearance down open side.
s
inch
mm
inch
mm
.100
.219
.344
.453
.688
.453
.312
2,54
5,56
8,74
11,51
17,48
11,51
7,93
.100
.150
.195
.255
.380
.383
.438
2,54
3,81
4,95
6,48
9,65
9,73
11,13
Kennametal and Top Notch tooling
technology combine to bring you
the very best threading and grooving
system available in the world today.
103
®
NG-2031RK
NG-2031LK
NG-2M080RK
NG-2M080LK
NG-2M100RK
NG-2M100LK
NG-2047RK
NG-2047LK
NG-2M120RK
NG-2M120LK
NG-2M140RK
NG-2M140LK
NG-2M150RK
NG-2M150LK
NG-2062RK
NG-2062LK
NG-2M170RK
NG-2M170LK
NG-2M175RK
NG-2M175LK
NG-2M195RK
NG-2M195LK
NG-2M200RK
NG-2M200LK
NG-2M220RK
NG-2M220LK
NG-2M225RK
NG-2M225LK
NG-2094RK
NG-2094LK
NG-2M250RK
NG-2M250LK
NG-2M275RK
NG-2M275LK
NG-2M300RK
NG-2M300LK
NG-2125RK
NG-2125LK
NG-2M325RK
NG-2M325LK
NG-3M100RK
NG-3M100LK
NG-3047RK
NG-3047LK
NG-3M120RK
NG-3M120LK
NG-3M150RK
NG-3M150LK
NG-3062RK
NG-3062LK
NG-3M175RK
NG-3M175LK
NG-3072RK
NG-3072LK
NG-3078RK
NG-3078LK
NG-3M200RK
NG-3M200LK
NG-3M220RK
NG-3M220LK
NG-3M225RK
NG-3M225LK
NG-3094RK
NG-3094LK
NG-3M250RK
NG-3M250LK
NG-3M275RK
NG-3M275LK
NG-3M300RK
NG-3M300LK
NG-3125RK
NG-3125LK
mm
inch
±.005
mm
inch
mm
.031
0,79
1,27
.030
0,76
0,80
.050
1,27
.030
0,76
.039
1,00
.050
1,27
.030
0,76
.047
1,19
.050
1,27
.030
0,76
.047
1,20
.050
1,27
.030
0,76
.055
1,40
.050
1,27
.030
0,76
.059
1,50
.110
2,79
.043
1,09
.062
1,57
.110
2,79
.043
1,09
.067
1,70
.110
2,79
.043
1,09
.069
1,75
.110
2,79
.043
1,09
.077
1,95
.110
2,79
.043
1,09
.079
2,00
.110
2,79
.043
1,09
.087
2,20
.110
2,79
.043
1,09
.089
2,25
.110
2,79
.043
1,09
.094
2,39
.110
2,79
.043
1,09
.098
2,50
.110
2,79
.043
1,09
.108
2,75
.110
2,79
.043
1,09
.118
3,00
.110
2,79
.043
1,09
.125
3,18
.110
2,79
.043
1,09
.128
3,25
0,05
0,13
0,05
0,13
0,05
0,13
0,05
0,13
0,05
0,13
0,05
0,13
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
.050
.031
.002
.005
.002
.005
.002
.005
.002
.005
.002
.005
.002
.005
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.110
2,79
.043
1,09
.039
1,00
1,90
.030
0,76
1,19
.075
1,90
.030
0,76
.047
1,20
.075
1,90
.030
0,76
.059
1,50
.094
2,39
.040
1,02
.062
1,57
.094
2,39
.040
1,02
.069
1,75
.094
2,39
.040
1,02
.072
1,83
.094
2,39
.040
1,02
.078
1,98
.094
2,39
.040
1,02
.079
2,00
.094
2,39
.040
1,02
.087
2,20
.094
2,39
.040
1,02
.089
2,25
.094
2,39
.040
1,02
.094
2,39
.150
3,81
.040
1,02
.098
2,50
.150
3,81
.040
1,02
.108
2,75
.150
3,81
.040
1,02
.118
3,00
.150
3,81
.040
1,02
.125
3,18
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
.075
.047
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.150
3,81
.040
1,02
104
steel
stainless steel
non-ferrous
high-temp alloys
KD100
inch
KT315
mm
K313
inch
±.001
KC5025
NG-K
left hand
e1
K68
right hand
grades
e
KC5410
dimensions
rε
w
KC5010
dimensions
NG-K
NG-3M320RK
NG-3M320LK
NG-3M325RK
NG-3M325LK
NG-3M350RK
NG-3M350LK
NG-3156RK
NG-3156LK
NG-3M400RK
NG-3M400LK
NG-3M425RK
NG-3M425LK
NG-3M450RK
NG-3M450LK
NG-3189RK
NG-3189LK
NG-1L
one cutting edge
mm
inch
mm
inch
±.005
mm
inch
mm
.126
3,20
3,81
.040
1,02
3,25
.150
3,81
.040
1,02
.138
3,50
.150
3,81
.040
1,02
.156
3,96
.150
3,81
.115
2,92
.157
4,00
.150
3,81
.115
2,92
.167
4,25
.150
3,81
.115
2,92
.177
4,50
.150
3,81
.115
2,92
.189
4,80
0,13
0,25
0,13
0,25
0,25
0,38
0,13
0,25
0,25
0,38
0,25
0,38
0,25
0,38
0,51
0,64
.150
.128
.005
.010
.005
.010
.010
.015
.005
.010
.010
.015
.010
.015
.010
.015
.020
.025
.150
3,81
.115
2,92
.005
.010
.005
.010
.005
.010
.005
.010
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
.050
1,27
—
—
.075
1,91
—
—
.075
1,91
—
—
.075
1,91
—
—
—
NG-1031L
.031
0,79
—
NG-1047L
.047
1,19
—
NG-1062L
.062
1,57
—
NG-1094L
.094
2,39
KD100
inch
±.001
KT315
KC5025
left hand
e1
KC5410
right hand
grades
e
K68
K313
rε
w
KC5010
steel
stainless steel
non-ferrous
high-temp alloys
105
®
NG
NG-2031R
NG-2031L
NG-2041R
NG-2041L
NG-2047R
NG-2047L
NG-2058R
NG-2058L
NG-2062R
NG-2062L
NG-2094R
NG-2094L
NG-2125R
NG-2125L
NG-3047R
NG-3047L
NG-3062R
NG-3062L
NG-3072R
NG-3072L
NG-3078R
NG-3078L
NG-3088R
NG-3088L
NG-3094R
NG-3094L
NG-3097R
NG-3097L
NG-3105R
NG-3105L
NG-3110R
NG-3110L
NG-3122R
NG-3122L
NG-3125R
NG-3125L
NG-3142R
NG-3142L
NG-3156R
NG-3156L
NG-3178R
NG-3178L
NG-3185R
NG-3185L
NG-3189R
NG-3189L
NGP
NGP-2031R
NGP-2031L
NGP-2062R
NGP-2062L
NGP-2125R
NGP-2125L
NGP-3088R
NGP-3088L
NGP-3125R
NGP-3125L
NGP-3156R
NGP-3156L
NGP-3189R
NGP-3189L
mm
inch
±.005
mm
inch
mm
.031
0,79
1,27
—
—
1,04
.050
1,27
—
—
.047
1,19
.050
1,27
—
—
.058
1,47
.050
1,27
—
—
.062
1,57
.110
2,79
—
—
.094
2,39
.110
2,79
—
—
.125
3,18
0,05
0,13
0,05
0,13
0,05
0,13
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
.050
.041
.002
.005
.002
.005
.002
.005
.005
.010
.005
.010
.005
.010
.005
.010
.110
2,79
—
—
.047
1,19
1,91
—
—
1,57
.094
2,39
—
—
.072
1,83
.094
2,39
—
—
.078
1,98
.094
2,39
—
—
.088
2,24
.094
2,39
—
—
.094
2,39
.150
3,81
—
—
.097
2,46
.150
3,81
—
—
.105
2,67
.150
3,81
—
—
.110
2,79
.150
3,81
—
—
.122
3,10
.150
3,81
—
—
.125
3,18
.150
3,81
—
—
.142
3,61
.150
3,81
—
—
.156
3,96
.150
3,81
—
—
.178
4,52
.150
3,81
—
—
.185
4,70
.150
3,81
—
—
.189
4,80
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,13
0,25
0,25
0,38
0,13
0,25
0,13
0,25
0,25
0,38
0,13
0,25
0,13
0,25
0,51
0,64
0,51
0,64
.075
.062
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.005
.010
.010
.015
.005
.010
.010
.015
.005
.010
.005
.010
.010
.015
.005
.010
.005
.010
.020
.025
.020
.025
.150
3,81
—
—
.031
0,79
1,27
—
—
1,57
.110
2,79
—
—
.125
3,18
0,05
0,13
0,13
0,25
0,13
0,25
.050
.062
.002
.005
.005
.010
.005
.010
.110
2,79
—
—
.088
2,23
2,39
—
—
3,18
.150
3,81
—
—
.156
3,96
.150
3,81
—
—
.189
4,80
0,13
0,25
0,13
0,25
0,13
0,25
0,51
0,64
.094
.125
.005
.010
.005
.010
.005
.010
.020
.025
.150
3,81
—
—
steel
stainless steel
non-ferrous
high-temp alloys
KD100
inch
KT315
mm
KC5025
inch
±.001
106
e1
KC5410
left hand
e
K68
K313
right hand
grades
dimensions
rε
w
KC5010
dimensions
mm
inch
±.005
mm
inch
mm
.062
1,57
3,18
.040
1,02
2,39
.250
6,35
.040
1,02
.125
3,18
.250
6,35
.040
1,02
.189
4,80
0,13
0,25
0,13
0,25
0,13
0,25
0,51
0,64
.125
.094
.005
.010
.005
.010
.005
.010
.020
.025
.250
6,35
.115
2,92
.189
4,80
.020
.025
0,51
0,64
.250
6,35
—
—
NR-3031LK
.062
1,57
.031
0,79
.094
2,39
.078
1,98
NR-3047LK
.094
2,39
.047
1,19
.150
3,81
.100
2,54
NR-3062LK
.125
3,18
.062
1,57
.150
3,81
.100
2,54
NR-3078LK
.156
3,96
.078
1,98
.150
3,81
.100
2,54
NR-2031L
.062
1,57
.031
0,79
.110
2,79
—
—
NR-2047L
.094
2,39
.047
1,19
.110
2,79
—
—
NR-2062L
.125
3,18
.062
1,57
.110
2,79
—
—
NR-3031L
.062
1,57
.031
0,79
.094
2,39
—
—
NR-3047L
.094
2,39
.047
1,19
.150
3,81
—
—
NR-3062L
.125
3,18
.062
1,57
.150
3,81
—
—
NR-3078L
.156
3,96
.078
1,98
.150
3,81
—
—
NR-3094L
.188
4,78
.094
2,39
.150
3,81
—
—
NGD-3094RK*
NGD-3094LK*
NGD-3125RK*
NGD-3125LK*
NGD-3189RK*
NGD-3189LK*
KD100
inch
KT315
mm
NGD-3062LK
e1
inch
±.001
NGD-3062RK
KC5025
NGD-K
left hand
KC5010
right hand
grades
e
K68
K313
rε
w
KC5410
*these inserts
have one cutting edge
NGD
NGD-3189R*
NGD-3189L*
*these inserts
NR-K
NR-3031RK
NR-3047RK
NR-3062RK
NR-3078RK
NR
NR-2031R
NR-2047R
NR-2062R
NR-3031R
NR-3047R
NR-3062R
NR-3078R
NR-3094R
steel
stainless steel
non-ferrous
high-temp alloys
107
®
dimensions
NRP
inch
mm
inch
±.005
mm
inch
mm
NRP-3031L
.062
1,57
.031
0,79
.094
2,39
—
—
NRP-3047L
.094
2,39
.047
1,19
.150
3,81
—
—
NRP-3062L
.125
3,18
.062
1,57
.150
3,81
—
—
NRP-3078L
.156
3,96
.078
1,98
.150
3,81
—
—
NRP-3094L
.188
4,78
.094
2,39
.150
3,81
—
—
NRD-3031L
.062
1,57
.031
0,79
.125
3,18
—
—
NRD-3062L*
.125
3,17
.062
1,57
.250
6,35
—
—
.125
3,17
3,81
—
—
4,77
0,13
0,25
0,51
0,64
.150
.188
.005
.010
.020
.025
.150
3,81
—
—
.125
3,17
3,81
.040
1,02
3,96
0,13
0,25
0,13
0,25
.150
.156
.005
.010
.005
.010
.150
3,81
.115
2,92
NRP-3031R
NRP-3062R
NRP-3078R
NRP-3094R
NRD-3031R
NRD-3062R*
*these inserts
NF
NF-3125R
NF-3125L
NF-3188R
NF-3188L
NF-K
NF-3125RK
NF-3125LK
NF-3156RK
NF-3156LK
108
steel
stainless steel
non-ferrous
high-temp alloys
KD100
mm
KT315
inch
±.001
KC5025
left hand
NRP-3047R
NRD
e1
KC5410
right hand
grades
e
K68
K313
rε
w
KC5010
NFD-K
NFD-3125RK*
NFD-3125LK*
mm
inch
mm
inch
±.005
mm
inch
mm
.125
3,17
.005
.010
0,13
0,25
.250
6,35
.040
1,02
.125
3,17
6,35
.040
1,02
4,80
0,13
0,25
0,51
0,64
.250
.189
.005
.010
.020
.025
.250
6,35
.115
2,92
.002
.005
.012
.015
0,05
0,13
0,31
0,38
.110
2,79
.108
2,74
.110
2,79
.108
2,74
.002
.005
.012
.015
0,05
0,13
0,31
0,38
.200
5,08
.151
3,83
.200
5,08
.151
3,83
.002
.005
.012
.015
0,05
0,13
0,31
0,38
.200
5,08
.108
2,74
.200
5,08
.108
2,74
.002
.005
.012
.015
0,05
0,13
0,31
0,38
.250
6,35
.151
3,83
.250
6,35
.151
3,83
KD100
inch
±.001
KT315
KC5025
e1
KC5410
left hand
e
K68
K313
right hand
grades
dimensions
rε
w
KC5010
*these inserts
NFD-KI
NFD-3125RKI*
NFD-3125LKI*
NFD-3189RKI*
NFD-3189LKI*
w
*these inserts
NP-K
NPD-K
inch
±.005
mm
NP-2002RK
—
.140
3,55
NP-2012RK
—
.140
3,55
NP-3002RK
—
.180
4,57
NP-3012RK
—
.180
4,57
NPD-2002RK*
—
.140
3,55
NPD-2012RK*
—
.140
3,55
NPD-3002RK*
—
.180
4,57
NPD-3012RK*
—
.180
4,57
*these inserts
steel
stainless steel
non-ferrous
high-temp alloys
109
Top Notch Grooving
®
dimensions
NU
NU-3094R
inch mm
±.005
inch
mm
.094
2,39
.020
0,51 .125
3,18
—
—
NU-3125L
.125
3,18
.047
1,19 .188
4,78
—
—
NU-3156L
.156
3,96
.047
1,19 .188
4,78
—
—
inch
mm
.087
2,21 .0125 0,30 .125
3,18
—
—
NU-3156R
d1
90° included angle on end form
NV-3RJ
NV-3LJ
w
inch mm
±.001
NB
NB-2R
NB-2L
NB-3R
NB-3L
NBD
NBD-2R
NBD-2L
NBD-3R
NBD-3L
.150
3,81
—
—
—
—
—
—
.195
4,95
—
—
—
—
—
—
.150
3,81
—
—
—
—
—
—
.195
4,95
—
—
—
—
—
—
*NB and NBD blanks are designed to allow modification of the "w” dimension and end form.
“W” dimension is given to indicate maximum possible width.
110
steel
stainless steel
non-ferrous
high-temp alloys
KT315
KD100
mm
KC5025
inch
NU-3094L
NU-3125R
NV
inch mm
±.001
KC5410
left hand
e1
K420
right hand
grades
e
K68
K313
rε
w
KC5010
KENNA PERFECT
Grooving
5 Easy Steps to Greater Productivity!
■ groove depth, width, and profile
■ material to be machined
■ application to be performed (face, OD, or ID grooving)
■ toolholder requirements (ie: KM, square shank, right/left)
STEP 1:
Choose your system based on the groove depth required.
Top Notch
A3
Grooving
Deep Grooving
(grooves where the depth is 1.5
times the groove width or less)
(grooves where the depth is 1.5 times
the groove width or greater)
See Top Notch grooving,
page 98.
Proceed to Step 2.
A3 deep grooving... for deep internal,
external, and face grooving applications.
A3 System Capabilities
Ratio: For grooving operations
where the depth is 1.5 times
the groove width or greater.
groove
min.
max.
width
.087
.397
depth
.130
1.260
Face grooving diameter range: .984 to
∞
111
KENNA PERFECT
A3 Deep Grooving
5 Easy Steps to Greater Productivity
(cont’d)
STEP 2:
Choose your toolholder based on the application. Please note that holders
are available in conventional square shank as well as quick-change versions.
Take special note of the seat size based on the groove width.
■ For OD grooving with integral square shank holders, see pages 174-175.
STEP 3:
Select the proper chipbreaker and feed rate for the application and
material to be machined. See table below. Note for future reference.
A3 Chipbreakers and Feed Rates – in/rev (mm/rev)
workpiece
material
application
example
steel
stainless
steel
non-ferrous
high-temp
alloys
DM
.002 - .010
(0,05 - 0,25)
DF
.002 - .006
(0,05 - 0,15)
DF
.002 - .010
(0,05 - 0,25)
DF
.002 - .005
(0,05 - 0,13)
DF
.002 - .006
(0,05 - 0,15)
DF
.002 - .005
(0,05 - 0,13)
DF
.002 - .007
(0,05 - 0,18)
DF
.0015 - .004
(0,04 - 0,10)
DR
.004 - .015
(0,10 - 0,40)
DF
.002 - .010
(0,05 - 0,25)
DF
.002 - .010
(0,05 - 0,25)
DF
.002 - .010
(0,05 - 0,25)
DF
.002 - .007
(0,05 - 0,18)
deep OD grooving
face & ID grooving
DF
.002 - .010
(0,05 - 0,25)
profiling
For profiling, the maximum recommended depth of cut is one-third the insert’s width.
NOTE: Use minimum feed rates for narrower grooves and heavier feed rates for wider grooves. Increase feed rate
as operation allows. See Technical Section for additional application information.
DF – Deep Finishing
112
DM – Deep Medium
DR – Deep Roughing
STEP 4:
Choose the grade and speed based on the
material and cutting conditions to be encountered.
Recommendations for Grade and Speed Selection –
sfm (m/min)
workpiece material application example
machining condition
high-performance for
optimal conditions
(clean cuts, good
machine condition,
higher speed capability)
steel
stainless
steel
non-ferrous
high-temp
alloys
KT315
330 - 750
(100 - 230)
KT315
230 - 560
(70 - 170)
KC5010
590 - 2800
(180 - 850)
KC5010
35 - 360
(10 - 110)
KC5010
200 - 600
(60 - 185)
general purpose
(first choice for
general machining)
KC5025
200 - 525
(60 - 160)
KC5010
160 - 450
(50 -140)
KC5010
500 - 2400
(150 - 730)
KC5025
35 - 200
(10 - 60)
(roughing, poor machine
condition, interrupted cuts,
low speed)
KC5025
160 - 360
(50 - 110)
KC5025
130 - 300
(40 - 90)
KC5025
200 - 1000
(60 - 305)
KC5025
35 - 150
(10 - 46)
KMF
200 - 650
(60 - 200)
KMF
35 - 100
(10 - 30)
*CBN tip inserts are available on request.
STEP 5:
Select insert and holder from Lathe Tooling Catalog 1010 pages which
meet the above criteria. Note the insert seat size and cutting width. Match the seat
size and cutting width to your toolholder selection.
For example:
Insert:
A3G250I08P1DF
Grade:
KT315
Width:
.250
Seat Size: 8
Congratulations!
You have successfully maximized productivity by selecting the best A3 insert
geometry, grade, and cutting specifications for your application based on the
workpiece material.
113
A3 Deep Grooving Insert Identification System
1.
Type of Program
A3 — deep grooving
program
7.
Corner Radii
5.
Insert Size
3.
Groove
Width
0
05
1
2
3
4
03
04
(*)4S
05
06
08
10
expressed in .001
inch or 1/100 mm
0000 for V shape
®
inch
metric
=
=
=
=
=
01
02
04
08
12
16
.008
.016
.032
.047
.062
full radius = 00
A3 G 0400 I 04 P 02 DF
2.
Insert Style
G — square
R — full radius
V — V-shape 35°
4.
Units
I =
M=
inch
metric
6.
Definition of
the Insert
8.
Chip Former
P = precision (ground)
U = utility (molded)
DF = Deep Finishing
DM = Deep Medium
DR = Deep Roughing
(*)4S designates a size “4 small” insert for face grooving small diameters.
A3 Custom Grooving Inserts
The A3 Deep Grooving System lends itself to
custom grooving applications. Six standard insert
seat sizes can be used to cut grooves from
.093 to .394, in .001 increments. Either round or
square grooves can be generated with various
corner radii. For additional information on how to
order custom grooving inserts, refer to Catalog
1010, pages 260-261 or call 1-800-446-7738.
114
Easy to order!
Delivery is quick, too!
To take advantage of A3’s flexibility, just build
your own part number from the table below and
call your local Kennametal service center at
1-800-446-7738 for a quick quote.
All uncoated inserts are shipped within five
working days and coated inserts within ten
working days.
A3 Deep Grooving Inserts
KC5025
KT315
A3-DF
seat size
KC5010
A3-DF
grades
rε
w
KMF
Metric Inserts
Precision Ground
A3G0300M03P02DF
A3G0300M03P04DF
3
3
.118
.118
3,00
3,00
.008
.016
0,2
0,4
A3G0400M04P02DF
A3G0400M04P04DF
A3G0400M04P08DF
4
4
4
.157
.157
.157
4,00
4,00
4,00
.008
.016
.031
0,2
0,4
0,8
A3R0300M03P00DF
3
.118
3,00
.059
1,50
A3R0400M04P00DF
4
.157
4,00
.079
2,00
A3G093I03P05DF
A3G125I03P05DF
3
3
.093
.125
2,36
3,18
.008
.008
0,2
0,2
A3G125I04P05DF
4
.125
3,18
.008
0,2
A3R093I03P00DF
A3R125I03P00DF
3
3
.093
.125
2,36
3,18
.047
.062
1,2
1,6
A3R125I04P00DF
4
.125
3,18
.062
1,6
A3R187I05P00DF
5
.187
4,75
.093
2,4
inch ±.001
mm ±0,025
inch
mm
Inch Inserts
Precision Ground
A3-DF
A3-DF
steel
stainless steel
non-ferrous
high-temp alloys
115
A3 Deep Grooving Inserts
®
Precision Molded
mm
3
.120
3,05
.008
0,2
A3G0405M04U02DM
4
.159
4,05
.008
0,2
A3R0305M03U00DR
3
.120
3,05
.060
1,52
A3R0405M04U00DR
4
.159
4,04
.080
2,02
inch
mm
inch
mm
.236
5,99
.008
0,2
4
NOTE: V-form inserts can only
be used in profiling toolholders,
see page 175.
116
rε
ls
A3V0000M04U02DM
KC5010
inch
A3G0305M03U02DM
35° Profiling
A3-DM
mm +0,15
-0
KT315
A3-DR
inch +.006
-0
KC5025
A3-DM
seat size
KMF
grades
rε
w
steel
stainless steel
non-ferrous
high-temp alloys
Maximize Productivity
with High-Performance
A2 Cutoff Tooling
Innovative A2 Insert Design
• V-prisms on both top and bottom enable higher
clamping force to prevent insert movement,
even when cutting at high feed rates.
• The cutting edge has a molded-in chipbreaker
ramp to direct chips away from the blade,
extending blade life.
• Positive rake cutting action combined with
Kennametal’s high-performance PVD coatings
result in superior tool life and chip control.
Patented A2 Insert Stop Design
• As cutting forces increase, clamping forces
also increase for secure holding power.
• Fixed insert stop assures solid seating with every
index and delivers up to 30% longer tool life.
• Cutting height is accurately controlled for
maximum reliability and performance on
even small diameter parts.
Quick and Easy Insert Indexing
• A convenient indexing wrench is
available to minimize downtime by
enabling fast removal and insertion
without damage to the cutting edge.
Part of our Complete Line of
A2/A3 Cutoff and Deep Grooving Tooling
117
KENNA
PERFECT
Cutoff System
Maximize
Productivity
with
5
Easy Steps
to Maximize Cutoff
Productivity
High
Performance
A2
Cutof
Step 1: Select insert width and holder type.
10
(250)
■ cutoff diameter
■ part/machine requirements
9
(225)
For required cutoff diameter, select
insert width and holder type based
on the part and machine requirement:
maximum cutoff diameter - in. (mm)
8
(200)
7
(175)
◆ To maximize rigidity, select the largest possible
blade height or an integral shank holder.
6
(150)
◆ Diameters shown are for cutoff to center.
Maximum cutoff depth to a through-hole is
5
(125)
one-half the diameter.
◆ To determine capability for cutoff to a
4
(100)
through-hole on integral shank or reinforced
blades, please refer to listing for that tool in
3
(75)
this catalog.
2
(50)
blade height
1
(25)
0
19 mm
26 mm
32 mm
.087
(2,2)
.063
(1,6)
.118
(3,0)
.157
(4,0)
.197
(5,0)
.236
(6,0)
.315
(8,0)
52 mm
integral
shank
toolholders
insert width - in. (mm)
toolholder type
blade:
(self-clamping, reinforced version)
blade:
(self-clamping)
integral shank toolholder:
(screw-clamping)
(available in 26 mm and 32 mm heights)
• frequently used tool
• two insert seats
• deepest depth of cut capability
• efficient tooling solution with
improved stability
• limited depth of cut capability
• shank tool with the highest stability
• limited depth of cut
• single insert seat
Step 2: Select insert lead angle.
■ part type
■ burr and center stub considerations
■ cutoff to center or through-hole
right/left 15° - 16°
right/left 6° - 10°
neutral (0°)
insert type
recommended
application
tool life
118
•
•
•
•
for cutting off solid workpieces
center stub will form on cutoff part
eliminates lateral deflection
best for deep cutoff depths
best tool life
•
•
for cutting off solid workpieces
with reduced formation of center stub
for cutoff to a through-hole with
reduced burr
better tool life
•
•
for thin-walled workpieces
for cutting off small diameter
workpieces with minimal burr
or center stub
good tool life
Step 3: Select chipbreaker
style and feed rate.
■ lead angle or neutral insert
■ workpiece material
-CF
-CM
-CR
Cutoff Fine
Cutoff Medium
Cutoff Rough
• cutoff insert with precision ground
cutting edge for low feeds
• curved cutting edge
• cutoff insert with precision molded
cutting edge for medium feeds
• stabilized straight cutting edge
• cutoff insert with precision molded
cutting edge for higher feed rates
• curved cutting edge
Chipbreaker Style and Feed Rates - in/rev (mm/rev)
insert type
steel
stainless
steel
non-ferrous
high-temp
alloys
N-CR
.003 – .012
(0,08 – 0,3)
N-CF
.002 – .005
(0,05 – 0,12)
N-CF
.002 – .007
(0,05 – 0,18)
N-CF
.002 – .004
(0,04 – 0,10)
N-CF
.002 – .006
(0,05 – 0,15)
R/L-CR
.002 – .005
(0,05 – 0,12)
R/L-CF
.002 – .003
(0,04 – 0,08)
R/L-CF
.002 – .003
(0,04 – 0,08)
R/L-CF
.002 – .004
(0,04 – 0,10)
R/L-CF
.002 – .003
(0,04 – 0,08)
Step 4: Select grade and speed.
Grade and Speed Recommendations - sfm (m/min)
■ cutting
condition
workpiece material
steel
stainless steel
non-ferrous
high-temp alloys
high performance
optimum conditions, higher speeds
■ workpiece
material
first choice
for general machining conditions
interrupted cuts, low speeds
KT315
395 - 625
(120 -190)
KT315
230 - 560
(70 - 170)
KT315
600 - 1300
(180 - 400)
KC5025
265 - 560
(80 - 170)
KC5025
265 - 500
(80 - 150)
KC5025
500 - 980
(150 - 300)
KC5025
200 - 325
(60 - 100)
KMF
135 - 265
(40 - 80)
KMF
200 - 600
(60 - 180)
KC5025
100 - 325
(30 - 100)
KC5025
80 - 250
(25 - 75)
KMF
30 - 80
(10 - 25)
Step 5: Select insert and holder from catalog pages.
Note the insert seat size and cutting width. Match the seat size and cutting
width to your toolholder selection.
Congratulations!
You have successfully maximized cutoff productivity by selecting the best insert,
toolholder, grade, and cutting specifications for your application!
119
A2 Cutoff Insert Identification System
3.
Hand of
Insert
1.
Insert Type
5.
Chipbreaker
-CF (Cutoff Fine)
-CM (Cutoff Medium)
-CR (Cutoff Rough)
N = neutral
R = right hand
L = left hand
A2 — cutoff
®
A2 040 N 00 CF 02
2.
Cutting Width
(in 1/10 mm)
4.
Approach Angle
of Main Cutting
Edge
00
06
10
15
16
=
=
=
=
=
neutral
6°
10°
15°
16°
6.
Corner Radius
00
01
02
03
04
mm
inch
0,03
0,1
0,2
0,3
0,4
.001
.004
.008
.010
.016
Kennametal proprietary identification system.
With more than 80 insert line items in three grades and three chipbreaker styles,
Kennametal offers a complete line of inserts designed to productively handle most
any cutoff application.
120
A2-CF — Cutoff Fine Inserts
KC5025
KT315
Right -CF Style
KMF
Left -CF Style
mm
a°
seat size
inch
Neutral -CF Style
grades
rε
w*
catalog number
mm
inch
A2 016N00CF01
1
.063
1,6
0
.004
0,1
A2 022N00CF02
A2 030N00CF02
A2 040N00CF02
2
4
.087
.118
.157
2,2
3,0
4,0
0
0
0
.008
.008
.008
0,2
0,2
0,2
A2 016L06CF00
A2 016L10CF00
A2 016L16CF00
1
1
1
.063
.063
.063
1,6
1,6
1,6
6
10
16
.001
.001
.001
0,03
0,03
0,03
A2 022L06CF02
A2 022L10CF00
A2 022L16CF00
2
2
2
.087
.087
.087
2,2
2,2
2,2
6
10
16
.008
.001
.001
0,2
0,03
0,03
A2 030L06CF02
A2 030L10CF00
A2 030L15CF00
3
3
3
.118
.118
.118
3,0
3,0
3,0
6
10
15
.008
.001
.001
0,2
0,03
0,03
A2 040L06CF02
4
.157
4,0
6
.008
0,2
A2 016R06CF00
A2 016R10CF00
A2 016R16CF00
1
1
1
.063
.063
.063
1,6
1,6
1,6
6
10
16
.001
.001
.001
0,03
0,03
0,03
A2 022R06CF02
A2 022R10CF00
A2 022R16CF00
2
2
2
.087
.087
.087
2,2
2,2
2,2
6
10
16
.008
.001
.001
0,2
0,03
0,03
A2 030R06CF02
A2 030R10CF00
A2 030R15CF00
3
3
3
.118
.118
.118
3,0
3,0
3,0
6
10
15
.008
.001
.001
0,2
0,03
0,03
A2 040R06CF02
4
.157
4,0
6
.008
0,2
3
steel
stainless steel
non-ferrous
high-temp alloys
*tolerance on
“w” dimension
width
inch
tolerance
mm
inch
mm
.063
1,6
+0
-.004
+0
-0,1
.087
.118
.157
2,2
3,0
4,0
+.006
-0
+0,15
-0
.197
.236
.315
5,0
6,0
8,0
+.010
-0
+0,25
-0
NOTE: A2 inserts are designed to fit both
A2 and A3 tooling (A2 inserts are not
recommended for face grooving).
121
A2-CM — Cutoff Medium Inserts
®
Neutral -CM Style
Left -CM Style
Right -CM Style
mm
inch
mm
A2 016N00CM01
1
.063
1,6
0
.004
0,1
A2 022N00CM02
2
.087
2,2
0
.008
0,2
A2 030N00CM02
3
.118
3,0
0
.008
0,2
A2 040N00CM02
4
.157
4,0
0
.008
0,2
A2 016L06CM00
A2 016L16CM00
1
1
.063
.063
1,6
1,6
6
16
.001
.001
0,03
0,03
A2 022L06CM00
2
.087
2,2
6
.001
0,03
A2 030L06CM01
3
.118
3,0
6
.004
0,1
A2 016R06CM00
A2 016R16CM00
1
1
.063
.063
1,6
1,6
6
16
.001
.001
0,03
0,03
A2 022R06CM00
2
.087
2,2
6
.001
0,03
A2 030R06CM01
3
.118
3,0
6
.004
0,1
steel
stainless steel
non-ferrous
high-temp alloys
*tolerance on
“w” dimension
width
tolerance
inch
mm
inch
mm
.063
1,6
+0
-.004
+0
-0,1
.087
.118
.157
2,2
3,0
4,0
+.006
-0
+0,15
-0
.197
.236
.315
5,0
6,0
8,0
+.010
-0
+0,25
-0
122
KT315
inch
KC5025
a°
seat size
KMF
catalog number
grades
rε
w*
A2-CR — Cutoff Rough Inserts
Left -CR Style
Right -CR Style
mm
inch
mm
A2 022N00CR02
2
.087
2,2
0
.008
0,2
A2 030N00CR02
3
.118
3,0
0
.008
0,2
A2 040N00CR02
4
.157
4,0
0
.008
0,2
A2 022L06CR03
2
.087
2,2
6
.012
0,3
A2 030L06CR03
3
.118
3,0
6
.012
0,3
A2 040L06CR03
4
.157
4,0
6
.012
0,3
A2 022R06CR03
2
.087
2,2
6
.012
0,3
A2 030R06CR03
3
.118
3,0
6
.012
0,3
A2 040R06CR03
4
.157
4,0
6
.012
0,3
KT315
inch
KC5025
Neutral -CR Style
a°
seat size
KMF
catalog number
grades
rε
w*
steel
stainless steel
non-ferrous
high-temp alloys
*tolerance on
“w” dimension
width
tolerance
inch
mm
inch
mm
.063
1,6
+0
-.004
+0
-0,1
.087
.118
.157
2,2
3,0
4,0
+.006
-0
+0,15
-0
.197
.236
.315
5,0
6,0
8,0
+.010
-0
+0,25
-0
123
Backturning,
Cutoff, Grooving,
and Threading
Kennametal is your single source for
Swiss tooling optimization!
We’ve expanded our Swiss tooling product line to include:
• new products for traditional turning, backturning,
threading, grooving, and cutoff applications
• new toolholders in both inch and metric shank
dimensions
• new inserts offered in PVD-coated carbide and
PVD-coated cermet
• new grades that feature up-sharp cutting edges and
offer excellent wear resistance
Swiss-style machines are becoming a popular alternative to larger
lathes and machining centers in many machine shops. The
increased flexibility and capabilities of Swiss-style machines also
create unique tooling challenges for machine operators.
Kennametal meets those challenges with this new line of Swiss
tooling solutions!
Kennametal will manufacture special nose radius, groove width,
or backturning lead angle inserts. Whatever your backturning,
grooving, cutoff, or threading requirements, Kennametal has
an effective solution. Kennametal engineering expertise and
commitment will satisfy your application requirements.
124
Backturning, Cutoff,
Grooving, and Threading
page
KENNA PERFECT Selection. . . . . .
126
Tooling Application Guide . . . . . . . . .
126
Insert Identification System . . . . . . . . .
127
Inserts
128
Laydown Backturning Inserts . . . . . . . . . . . . . . . . . . . .
128
On-Edge Backturning Inserts . . . . . . . . . . . . . . . . . . . . .
128
On-Edge Threading Inserts . . . . . . . . . . . . . . . . . . . . . . . .
129
On-Edge Cutoff Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . .
129
On-Edge Grooving Inserts . . . . . . . . . . . . . . . . . . . . . . . . . .
130
Need technical
assistance?
Call our
Tech Hotline!
125
KENNA PERFECT Grade Selection
®
PVD Coated Grades
grade
coating
insert styles
composition and application
C
class
ISO
class
turning, boring,
& profiling
composition: A PVD TiN-coated grade with a tough
ultra-fine grain, unalloyed substrate.
application: For general-purpose machining of most
steels, stainless steels, high-temperature alloys, titanium,
irons, and non-ferrous materials. Features sharp cutting
edges and excellent wear resistance.
C1
C5
K25, K35,
M30, M40,
P25, P45
turning, boring,
& profiling
composition: A PVD TiN-coated cermet turning, boring,
and profiling grade.
application: Ideal for finishing and semi-finishing of most
carbon and alloy steels and stainless steels. Performs
very well in cast and ductile iron applications. Provides
long and consistently reliable tool life and will produce
excellent workpiece surface finishes. Features sharp
cutting edges and excellent wear resistance.
C2
C5
K25, K35,
M30, M40,
P25, P45
KC5035
!
NEW
KT5135
!
NEW
NOTE: These grades are specifically offered for Swiss-Style backturning, cutoff, grooving, and threading applications.
For other grades and application guidelines, please see the Technical Data Section of this catalog.
Feed and Speed Recommendations
material
grade
speed range
sfm (m/min)
feed range
ipr (mm/rev)
steel
KC5035
KT5135
225 - 850 (70 - 260)
350 - 1000 (110 - 305)
.002 - .012 (0,05 - 0,30)
.001 - .010 (0,03 - 0,75)
stainless steel
KC5035
KT5135
150 - 500 (50 - 150)
225 - 600 (70 - 180)
.002 - .012 (0,05 - 0,30)
.001 - .010 (0,03 - 0,25)
cast iron
KC5035
KT5135
150 - 650 (50 - 200)
225 - 850 (70 - 260)
.003 - .012 (0,08 - 0,30)
.001 - .010 (0,03 - 0,25)
non-ferrous
KC5035
500 - 1500 (150 - 460)
.004 - .018 (0,01 - 0,46)
high-temp alloys
KC5035
50 - 300 (15 - 90)
.004 - .018 (0,01 - 0,46)
Tooling Applications
126
Insert Identification System
7.
Width or
Nose Radius
5.
Insert Thickness
symbol
size
(mm)
03
3,18
width on grooving
inserts and nose
radius on backturning
inserts in 0,01 of mm.
16 03 R 033
4.
Insert Size
1.
Type of Insert
3.
Insert Usage
T = on-edge triangle
V = 35° rhombic
S = laydown
backturning insert
G = plunge grooving
P = profiling/backturning
T = threading
T 20 G –
insert size
(mm)
0,6
13
16
22
6.
Hand of
Insert
d
(mm)
6,35
7,94
9,525
12,70
R = right
L = left
METRIC INSERTS
INCH INSERTS
2.
Effective
Cutting Angle
5.
Insert Thickness
02 = 2°
10 = 10°
20 = 20°
30 = 30°
symbol
2
3
2
4.
Insert Size
insert size
inch
2
2.5
3
4
d
inch
.25
.3125
.375
.500
size
inch
.125
7.
Width or
Nose Radius
width on grooving
inserts and nose radius
on backturning inserts
in .001 of an inch.
R 013
6.
Hand of
Insert
R = right
L = left
127
Backturning, Cutoff, Threading, and Grooving
®
Laydown Backturning
S10P
d
rε
s
d1
S10P 06 03 L005
6,350
6,350
0,05
0,05
3,18
3,18
3,00
3,00
3,00
3,00
S10P 06 03 L010
6,350
6,350
0,10
0,10
3,18
3,18
3,00
3,00
3,00
3,00
S10P 06 03 L015
6,350
6,350
0,15
0,15
3,18
3,18
3,00
3,00
3,00
3,00
S10P-22L002
.250
.250
.002
.002
.125
.125
.118
.118
.118
.118
S10P-22L004
.250
.250
.004
.004
.125
.125
.118
.118
.118
.118
S10P-22L006
.250
.250
.006
.006
.125
.125
.118
.118
.118
.118
left hand
KC5035
right hand
maximum
depth of cut
KT5135
grades
catalog number
metric
S10P 06 03 R005
S10P 06 03 R010
S10P 06 03 R015
inch
S10P-22R002
S10P-22R004
S10P-22R006
– stocked
▫ – limited stock
steel
stainless steel
cast iron
non-ferrous
high-temp alloys
On-Edge Backturning
T02P
d
rε
s
d1
T02P 16 03 L000
9,525
9,525
0,03
0,03
3,18
3,18
4,40
4,40
2,50
2,50
T02P 16 03 L005
9,525
9,525
0,05
0,05
3,18
3,18
4,40
4,40
2,50
2,50
T02P 16 03 L010
9,525
9,525
0,10
0,10
3,18
3,18
4,40
4,40
2,50
2,50
T02P 16 03 L015
9,525
9,525
0,15
0,15
3,18
3,18
4,40
4,40
2,50
2,50
T02P-32L001
.375
.375
.001
.001
.125
.125
.173
.173
.098
.098
T02P-32L002
.375
.375
.002
.002
.125
.125
.173
.173
.098
.098
T02P-32L004
.375
.375
.004
.004
.125
.125
.173
.173
.098
.098
T02P-32L006
.375
.375
.006
.006
.125
.125
.173
.173
.098
.098
left hand
KC5035
right hand
maximum
depth of cut
KT5135
grades
catalog number
metric
T02P 16 03 R000
T02P 16 03 R005
T02P 16 03 R010
T02P 16 03 R015
inch
T02P-32R001
T02P-32R002
T02P-32R004
T02P-32R006
– stocked
128
steel
stainless steel
cast iron
non-ferrous
high-temp alloys
right hand
T30T
d
rε
s
d1
T30T 16 03 005L
9,525
9,525
0,05
0,05
3,18
3,18
4,4
4,4
T30T 16 03 010L
9,525
9,525
0,10
0,05
3,18
3,18
4,4
4,4
T30T-32002L
.375
.375
.002
.002
.125
.125
.173
.173
T30T-32004L
.375
.375
.004
.004
.125
.125
.173
.173
left hand
KT5135
catalog number
KC5035
On-Edge Threading
metric
T30T 16 03 005R
T30T 16 03 010R
inch
T30T-32002R
T30T-32004R
Thread per inch range
(tpi) is 25 to 50.
Thread pitch range is
0,5 mm to 1,0 mm.
steel
stainless steel
cast iron
non-ferrous
high-temp alloys
– stocked
On-Edge Cutoff
V10G
d
w
rε
e
s
d1
max doc
KT5135
right hand
KC5035
catalog number
V10G 13 03 L100
7,94
7,94
1,00
1,00
*
*
6,00
6,00
3,18
3,18
3,40
3,40
5,50
5,50
V10G 13 03 L150
7,94
7,94
1,50
1,50
*
*
6,00
6,00
3,18
3,18
3,40
3,40
5,50
5,50
V10G-2.52L039
.313
.313
.039
.039
*
*
.236
.236
.125
.125
.134
.134
.217
.217
V10G-2.52L059
.313
.313
.059
.059
*
*
.236
.236
.125
.125
.134
.134
.217
.217
left hand
metric
V10G 13 03 R100
V10G 13 03 R150
inch
V10G-2.52R039
V10G-2.52R059
– stocked
steel
stainless steel
cast iron
non-ferrous
high-temp alloys
*Sharp corner
129
®
On-Edge Grooving Inserts
w
+0,05 mm
(+.002 inch)
rε
e
s
d1
max. doc
T20G 16 03 L033
9,525
9,525
0,33
0,33
0,03
0,03
0,80
0,80
3,18
3,18
4,40
4,40
0,70
0,70
T20G 16 03 L050
9,525
9,525
0,50
0,50
0,03
0,03
1,20
1,20
3,18
3,18
4,40
4,40
1,10
1,10
T20G 16 03 L075
9,525
9,525
0,75
0,75
0,03
0,03
2,00
2,00
3,18
3,18
4,40
4,40
1,90
1,90
T20G 16 03 L095
9,525
9,525
0,95
0,95
0,03
0,03
2,00
2,00
3,18
3,18
4,40
4,40
1,90
1,90
T20G 16 03 L100
9,525
9,525
1,00
1,00
0,05
0,05
2,20
2,20
3,18
3,18
4,40
4,40
2,1
2,1
T20G 16 03 L125
9,525
9,525
1,25
1,25
0,05
0,05
2,20
2,20
3,18
3,18
4,40
4,40
2,1
2,1
T20G 16 03 L145
9,525
9,525
1,45
1,45
0,05
0,05
2,20
2,20
3,18
3,18
4,40
4,40
2,1
2,1
T20G 16 03 L150
9,525
9,525
1,50
1,50
0,05
0,05
2,20
2,20
3,18
3,18
4,40
4,40
2,1
2,1
T20G 16 03 L175
9,525
9,525
1,75
1,75
0,05
0,05
2,20
2,20
3,18
3,18
4,40
4,40
2,1
2,1
T20G 16 03 L200
9,525
9,525
2,00
2,00
0,05
0,05
2,70
2,70
3,18
3,18
4,40
4,40
2,6
2,6
T20G 16 03 L250
9,525
9,525
2,50
2,50
0,05
0,05
2,70
2,70
3,18
3,18
4,40
4,40
2,6
2,6
T20G-32L013
.375
.375
.013
.013
.001
.001
.031
.031
.125
.125
.173
.173
.028
.028
T20G-32L020
.375
.375
.020
.020
.001
.001
.047
.047
.125
.125
.173
.173
.043
.043
T20G-32L030
.375
.375
.030
.030
.001
.001
.079
.079
.125
.125
.173
.173
.075
.075
T20G-32L037
.375
.375
.037
.037
.001
.001
.079
.079
.125
.125
.173
.173
.075
.075
T20G-32L039
.375
.375
.039
.039
.002
.002
.087
.087
.125
.125
.173
.173
.083
.083
T20G-32L049
.375
.375
.049
.049
.002
.002
.087
.087
.125
.125
.173
.173
.083
.083
T20G-32L057
.375
.375
.057
.057
.002
.002
.087
.087
.125
.125
.173
.173
.083
.083
T20G-32L059
.375
.375
.059
.059
.002
.002
.087
.087
.125
.125
.173
.173
.083
.083
T20G-32L069
.375
.375
.069
.069
.002
.002
.087
.087
.125
.125
.173
.173
.083
.083
T20G-32L079
.375
.375
.079
.079
.002
.002
.106
.106
.125
.125
.173
.173
.102
.102
T20G-32L098
.375
.375
.098
.098
.002
.002
.106
.106
.125
.125
.173
.173
.102
.102
KC5035
T20G
d
left hand
KT5135
right hand
grades
dimensions
catalog number
metric
T20G 16 03 R033
T20G 16 03 R050
T20G 16 03 R075
T20G 16 03 R095
T20G 16 03 R100
T20G 16 03 R125
T20G 16 03 R145
T20G 16 03 R150
T20G 16 03 R175
T20G 16 03 R200
T20G 16 03 R250
inch
T20G-32R013
T20G-32R020
T20G-32R030
T20G-32R037
T20G-32R039
T20G-32R049
T20G-32R057
T20G-32R059
T20G-32R069
T20G-32R079
T20G-32R098
– stocked
130
steel
stainless steel
cast iron
non-ferrous
high-temp alloys
Micro Boring Bar Inserts
page
Boring Inserts
A-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
132-133
133
Indexable Screw-On Inserts
80° Diamond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Threading and Grooving . . . . . . . . . . . . . . . . . . . . .
45° Diamond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Triangle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trigon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
134
135
136
136-138
138
131
Boring Inserts for Micro Boring Bars
®
A-Series
dimensions
I2
f
ABD-062-187R
ABD-062-312R
.062
.062
.837
.962
.187
.312
.026
.026
ABD-094-281R
ABD-094-500R
.094
.094
.931
1.150
.281
.500
.041
.041
ABD-125-375R
ABD-125-625R
.125
.125
1.025
1.275
.375
.625
.057
.057
ABD-156-500R
ABD-156-875R
.156
.156
1.150
1.525
.500
.875
.073
.073
dimensions
f
t
a
.110
.962
.312
.046
.025
.030
AGD-125-040R
.140
1.025
.375
.061
.030
.040
AGD-156-050R
.175
1.150
.500
.076
.045
.050
132
I1
f
t
R
APD-062-187R
.062
.837
.187
.025
.017
.007
APD-094-281R
.094
.931
.281
.041
.028
.007
APD-125-375R
.125
1.025
.375
.057
.040
.007
APD-156-500R
.156
1.150
.500
.073
.050
.007
KC610
I
NOTE: For sfm guidelines for specific materials, refer to KENNA PERFECT Selection System on pages 24-31 and page 633 in Catalog 1010.
grades
Dmin
– stocked
KD100
I2
dimensions
APD – Profiling
KB5625
I
AGD-095-030R
catalog number
KD100
AGD – Grooving
Dmin
grades
KC610
catalog number
KD100
I
KB5625
Dmin
KB5625
ABD – Boring
KC610
catalog number
grades
Boring Inserts for Micro Boring Bars
A-Series
dimensions
ATD – Threading
I1
f
t
tpi
ATD-095-312R
.098
.962
.312
.046
.022
48 - 32
ATD-125-375R
.104
1.025
.375
.061
.027
48 - 24
ATD-156-500R
.171
1.150
.500
.076
.032
48 - 20
KD100
I
KB5625
Dmin
KC610
catalog number
grades
B-Series
dimensions
I1
f
BB-187-0750R
BB-187-1250R
.187
.187
1.800
2.300
.750
1.250
.088
.088
BB-250-1000R
BB-250-1750R
.250
.250
2.050
2.800
1.000
1.750
.120
.120
BB-312-1250R
BB-312-2125R
.312
.312
2.300
3.175
1.250
2.125
.151
.151
dimensions
BP – Profiling
Dmin
I
I1
f
t
BP-187-385R
.187
1.650
.600
.088
.062
BP-250-825R
.250
1.875
.825
.120
.078
BP-312-1000R
.312
2.050
1.000
.151
.094
KD100
grades
KC610
catalog number
KD100
I
KB5625
Dmin
KB5625
BB – Boring
KC610
catalog number
grades
– stocked
133
Indexable Inserts
®
80° Diamond – Screw-On
.040
.040
.040
.002
.008
.015
R
.250
.250
.254
.254
.075
.075
.008
.015
grades
d1
l
s
R
CDHH-1.20.60.5L*
.156
.156
.158
.158
.040
.040
.008
.008
CDHH-1.20.61L*
.156
.156
.158
.158
.040
.040
.015
.015
CDHH-1.20.60.5R*
CDHH-1.20.61R*
*NOTE: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.
– stocked
134
KC5025
CDHH
left hand
KC5010
dimensions
catalog number
right hand
KT315
s
KD100
l
KT315
CPCA-210.5
CPCA-211
d1
KD100
CPCA
grades
KC5010
dimensions
catalog number
KD100
.158
.158
.158
KT315
.156
.156
.156
KB5625
R
KC5025
s
KB5625
CDHB-1.20.60.1
CDHB-1.20.60.5
CDHB-1.20.61
l
KB5625
CDHB
d1
KC5025
catalog number
grades
KC5010
dimensions
Indexable Inserts
Grooving Screw-On
.020
.025
.040
.040
.040
.015
.020
.025
.030
.040
CPG
d1
s
t
a
CPG-2-030-2L
.250
.250
.075
.075
.065
.065
.030
.030
CPG-2-060-2L
.250
.250
.075
.075
.065
.065
.060
.060
CPG-2-030-2R
CPG-2-060-2R
KC5010
left hand
KT315
grades
dimensions
catalog number
right hand
KD100
.050
.050
.050
.050
.050
KT315
.156
.156
.156
.156
.156
KB5625
a
KC5025
t
KD100
CDG-1.2-015-2R
CDG-1.2-020-2R
CDG-1.2-025-2R
CDG-1.2-030-2R
CDG-1.2-040-2R
s
KB5625
CDG
d1
KC5025
catalog number
grades
KC5010
dimensions
Threading Screw-On
.050
.025
.002
s
t
R
CPT-2-005-2L
.250
.250
.075
.075
.065
.065
.005
.005
CPT-2-005-2R
KT315
d1
KC5010
CPT
left hand
KD100
grades
dimensions
catalog number
right hand
KT315
.156
KD100
R
KB5625
t
KC5025
s
KB5625
CDT-1.2-002-2R
d1
KC5025
CDT
grades
KC5010
dimensions
catalog number
– stocked
135
Indexable Inserts
®
45° Diamond – Screw-On
GPCD
GPCD-50.5
GPCD-51
R
.156
.156
.209
.209
.062
.062
.008
.015
KD100
s
KT315
I
KB5625
d1
KC5025
catalog number
grades
KC5010
dimensions
Triangle Screw-On
s
R
TDHH-1.280.750.5L
.160
.160
.277
.277
.047
.047
.008
.008
TDHH-1.280.751L
.160
.160
.277
.277
.047
.047
.015
.015
TDHH-1.280.752L
.160
.160
.277
.277
.047
.047
.031
.031
TDHH-1.280.750.5R
TDHH-1.280.751R
TDHH-1.280.752R
KT315
I
KD100
d1
KC5025
TDHH
left hand
KC5010
right hand
KB5625
grades
dimensions
catalog number
Note: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.
s
R
TPCG-220.5L
.250
.250
.433
.433
.096
.096
.008
.008
TPCG-221L
.250
.250
.433
.433
.096
.096
.015
.015
TPCG-222L
.250
.250
.433
.433
.096
.096
.031
.031
TPCG-320.5L
.375
.375
.630
.630
.127
.127
.008
.008
TPCG-321L
.375
.375
.630
.630
.127
.127
.015
.015
TPCG-322L
.375
.375
.630
.630
.127
.127
.031
.031
TPCG-220.5R
TPCG-221R
TPCG-222R
TPCG-320.5R
TPCG-321R
TPCG-322R
Note: Left-hand inserts must be used in right-hand bars only. Right-hand inserts must be used in left-hand bars only.
– stocked
136
KT315
I
KD100
d1
KC5025
TPCG
left hand
KC5010
right hand
KB5625
grades
dimensions
catalog number
Indexable Inserts
Triangle Screw-On
KC5025
KB5625
KD100
KT315
grades
KC5010
dimensions
TDHB
TDHB-1.280.750.1
TDHB-1.280.750.5
TDHB-1.280.751
TDHB-1.280.752
.160
.160
.160
.160
.277
.277
.277
.277
.047
.047
.047
.047
.002
.008
.015
.031
TD-P
TD-6P0.1
TD-6P0.5
TD-6P1
TD-6P2
.375
.375
.375
.375
.630
.630
.630
.630
.127
.127
.127
.127
.002
.008
.015
.031
TPCB
TPCB-220.1
TPCB-220.5
TPCB-221
TPCB-222
.250
.250
.250
.250
.433
.433
.433
.433
.096
.096
.096
.096
.002
.008
.015
.031
catalog number
d1
I
s
R
– stocked
137
Indexable Inserts
®
Triangle Screw-On
R
KD100
s
KT315
I
KB5625
d1
KC5025
catalog number
grades
KC5010
dimensions
TPCH
TPCH-220.5
TPCH-221
.250
.250
.433
.433
.096
.096
.008
.015
TPGH
TPGH-321
TPGH-322
.375
.375
.630
.630
.127
.127
.015
.031
Trigon Screw-On
WPCT
R
WPGT-1.510UF
WPGT-1.510.5UF
.187
.187
.128
.128
.062
.062
.004
.008
WPGT-21.50UF
WPGT-21.50.5UF
.250
.250
.174
.174
.094
.094
.004
.008
– stocked
138
KT315
s
KD100
I
KB5625
d1
KC5010
catalog number
KC5025
grades
dimensions
Table of Contents
Clamping Units . . . . . . . . . . . . . .
page
141
Cutting Units . . . . . . . . . . . . . . . . . .
144
Systems Tooling. . . . . . . . . . . . . . . . . .
158
Spares and Accessories . . . . . . . . . . . .
161
TM
Kennametal has again developed a
revolutionary quick-change tooling system
in introducing KM Micro — an evolution of
the world-renowned KM® design, but smaller
and more compact. KM Micro is designed
to fit most Swiss-style turning centers,
smaller lathes, and screw machines. The
quick-change interchangeable heads save tool index and setup
time by as much as 80%!
Our unique flange mounting system enables you to add an
additional one to three tool positions on a single dedicated
toolblock, resulting in increased tool capacity on your existing
machine. Another benefit is the rigid nature of the dedicated
toolblock. By elimination of the tool slots, you receive added
stiffness during deep turning operations.
The new KM Micro square shank holders
enable easy and quick installation into
your existing toolblock. Simply remove
the existing toolholder, replace it with
a KM Micro retrofit toolholder, and
you’re up and running!
actual size
Kennametal offers you the industry’s most comprehensive
selection of high-performance micro-machining solutions!
Whether you‘re machining a very small workpart or
large workparts with small holes and turned diameters,
Kennametal has a complete range of high-performance
micro-machining tooling to meet your needs.
139
Features
1
KM Micro is a compact interchangeable
cutting unit system.
2
Face and taper contact between cutting
unit and clamping unit.
3
Coincidental cone clamping design.
4
Simple, yet effective, clamping
mechanism.
5
5/8" (16 mm) square shank retrofit
units for standard slotted toolblocks.
6
Unique flange mount system is a
versatile alternative to square shank
retrofit toolholders.
7
Flange-mount units come in a variety of
configurations with and without coolant
ports.
FunctionS
5
Clamping units are designed to industry
standard sizes and fit the machine tool
slot or tool post for square-shank
toolholders. Simply remove the existing
toolholder, install a KM Micro
replacement toolholder, and you’re up
and running. Square shank units are
designed to accept cutting units in two
orientations: the insert tip flush with the
shank side (typical for Swiss-style
machines), or the insert tip offset from
the shank side (typical for machines
using turrets).
Inserts are changed off the machine,
resulting in up to 60% reduction in time
to change the cutting tip. Machine setup
time can be reduced by up to 80%.
2
Highly accurate face and taper contact
reduces or eliminates the need for trial
cuts. Tooling can be pregaged then
loaded in the machine. Simply enter the
deviations/offsets into the machine
control, and you’re ready to run.
3
Maximum surface area contact provides
long service life. Shared access cone
design delivers high radial repeatability,
which in turn provides accurate center
height repeatability. Positive rear taper
contact increases rigidity and stability.
4
KM Micro cutting units are easy to
change. The clamping design offers an
efficient mechanical advantage that
produces a high clamping force with very
low input force.
5
No special tool adapters or blocks are
required when installing or retrofitting
the system to your machine.
6
Tool capacity on your existing machine is
increased, in some cases up to three
additional tool positions. Elimination of
toolholder slots provides increased
toolblock stiffness and rigidity.
7
The toolblock/flange combination can be
optimized to suit the requirements of a
particular machine or workpiece family.
140
Simply remove the quick-change cutting
unit from the toolholder and replace it with
a cutting unit that contains a new insert.
(magnified 100%)
2
Benefits
1
1
The combination of face and taper contact
provides an accurate and repeatable insert
tip location in both cutting axes.
(magnified
100%)
(actual size)
4
3
Coincidental cone design maximizes
the contact area between the clamping
mechanism and the cutting unit. As a
result, the cutting unit and clamping
mechanism are on a shared axis and
provide accurate radial location. Cone
design enables positive spreading of
the rear portion of the taper to ensure
contact during clamping.
Square Shank
Mount System
Flange Mount
System
6
6
The clamping
screw is activated by a
torque wrench at right
angle to the centerline of
the cutting tool, behind
the gage face of the
clamping unit. To release
the clamping unit, simply
reverse the Torx screw. A
torque of 8 ft.-lbs. or 10
Nm and three turns of the
activation screw are
required to lock and
unlock the unit.
Super Tight Stacking
Mount System
7
Flange mount units can be installed
on new machines or retrofitted to
existing machines. Dedicated
flange-mount toolblocks enable
additional tool positions to be used
within the same conventional
toolblock envelope.
7
Kennametal offers a variety of standard
flange-mount units to satisfy the
different turret and toolblock
configurations and combinations for
most of today’s machines.
KM Micro Clamping Units
Clamping Unit – Square Shank Replacement
NCM/RCM/LCM
KM size
dKM
hand
l1
KM12-NCM-1212-100
12
neutral
KM16-NCM-1616-95
KM16-NCM-1616-105
16
16
neutral
neutral
KM12-RCM-08-400
KM12-LCM-08-400
12
12
KM16-NCM-10-382
KM16-NCM-10-421
16
16
catalog number
f1
b
h
spare parts
100,0
8,00
12,00
12,00
KM12-NSPKG
T25
95,00
105,00
10,00
10,00
16,00
16,00
16,00
16,00
KM16-NSPKG
KM16-NSPKG
T27
T27
right hand
left hand
4.000
4.000
.315
.315
.500
.500
.500
.500
KM12-NSPKG
KM12-NSPKG
T25
T25
neutral
neutral
3.819
4.213
.394
.394
.625
.625
.625
.625
KM16-NSPKG
KM16-NSPKG
T27
T27
metric
inch
NCM SS
KM size
dKM
d1
d2
l1
l2
spare parts
KM12-NCM-SS19-14
12
19,00
25,00
100,00
14,00
KM12-NRPKG
T25
KM16-NCM-SS20-16
KM16-NCM-SS22-16
16
16
20,00
22,00
26,00
28,00
100,00
100,00
16,00
16,00
KM16-NRPKG
KM16-NRPKG
T27
T27
KM12-NCM-SS12-055
12
.750
.984
3.937
.551
KM12-NRPKG
T25
KM16-NCM-SS12-063
KM16-NCM-SS16-063
16
16
.750
1.000
.984
1.260
3.937
3.937
.630
.630
KM16-NRPKG
KM16-NRPKG
T27
T27
KM size
dKM
Torx size
torque setting
TWT256R
12
T25
5 - 6 ft. lbs.
TWT278R
16
T27
7 - 8 ft. lbs.
catalog number
metric
inch
Wrench
catalog number
141
®
KM Micro Flanges
catalog number
KM16-NCM-SF2726*
KM16-NCM-SEF2726*
catalog number
KM16-NCM-SF2728*
KM16-NCM-SEF2728*
*Non-stocked standards
142
KM size coolant
dKM
16
16
No
No
KM size coolant
dKM
16
16
Yes
Yes
d1
l1
l2
h1
h2
p1
spare parts
mounting bolts
(2 req’d)
spare parts
package
.551
.551
.630
1.024
.866
1.260
1.063
1.063
.531
.531
1.024
1.024
MS-337 (M6 x 20 SHCS)
MS-337 (M6 x 20 SHCS)
KM16-NRPKG
KM16-NRPKG
d1
l1
l2
h1
h2
p1
spare parts
mounting bolts
(2 req’d)
spare parts
package
.551
.551
.630
1.024
.866
1.260
1.063
1.063
.531
.531
1.102
1.102
MS-337 (M6 x 20 SHCS)
MS-337 (M6 x 20 SHCS)
KM16-NRPKG
KM16-NRPKG
T27
T27
T27
T27
KM Micro Flanges
catalog number
KM size coolant
dKM
d1
l1
l2
h1
h2
p1
spare parts
mounting bolts
(4 req’d)
spare parts
package
KM12-NCM-SF1522
12
No
.394
.551
.709
.620
.310
.866
125.316 (M3 x 16)
KM12-NRPKG
T25
KM16-NCM-SF1928
KM16-NCM-SEF1928
16
16
No
No
.551
.551
.630
1.024
.866
1.260
.748
.748
.374
.374
1.102
1.102
MS-319 (M4 x 20 SHCS)
MS-319 (M4 x 20 SHCS)
KM16-NRPKG
KM16-NRPKG
T27
T27
d1
l1
l2
h1
h2
p1
spare parts
mounting bolts
(4 req’d)
spare parts
package
.551
.551
.630
1.024
.866
1.260
.748
.748
.374
.374
1.260
1.260
MS-319 (M4 x 20 SHCS)
MS-319 (M4 x 20 SHCS)
KM16-NRPKG
KM16-NRPKG
catalog number
KM16-NCM-SF1932*
KM16-NCM-SEF1932*
KM size coolant
dKM
16
16
Yes
Yes
T27
T27
*Non-stocked standards
143
®
MCL 95°
See pages 34-36
for inserts.
catalog
catalog number
number
right hand
left hand
KM size
dKM
l1
f
KM16-MCLNR09
KM16-MCLNL09
16
1.181
.394
CNMG 322
ICSN-332
KLM-34L-T9
CKM-7LP
STCM-9-T9
T9
KM16-MCLNR12
KM16-MCLNL12
16
1.181
.394
CNMG 432
ICSN-432
KLM-46L-T15
CKM-20LP
STCM-11-T15
T15
IDSN-322
KLM-34L-T9
CKM-7LP
STCM-9-T9
T9
MDJ 93°
See pages 36-38
for inserts.
catalog
catalog number
number
right hand
left hand
KM16-MDJNR11
144
KM16-MDJNL11
KM size
dKM
l1
f
16
1.181
.394
DNMG 332
MSD 45°
See pages 38-40
for inserts.
catalog number
catalog number
right hand
left hand
KM size
dKM
l1
f
KM16-MSDNN09
16
1.181
0
SNMG 322
ISSN-322
KLM-34L-T9
CKM-7LP
STCM-9-T9
T9
ITSN-322
KLM-34L-T9
CKM-7LP
STCM-9-T9
T9
MTG 90°
See pages 40-42
for inserts.
catalog
catalog number
number
right hand
left hand
KM16-MTGNR16
KM16-MTGNL16
KM size
dKM
l1
f
16
1.181
.394
TNMG 332
145
®
Screw-On Inserts
SCG 90°
See pages 46-49
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SCGCR09
KM12-SCGCR12
KM12-SCGCL09
KM12-SCGCL12
12
12
.591
.787
.315
.315
CCMT-32.52
CCMT-432
MS-1155
MS-1157
—
—
—
—
T15
T15
KM16-SCGCR09
KM16-SCGCR12
KM16-SCGCL09
KM16-SCGCL12
16
16
.787
.787
.394
.394
CCMT-32.52
CCMT-432
MS-1156
MS-1157
SKCP-343
—
SRS-3
—
T15
T15
SCL 95°
See pages 46-49
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SCLCR09
KM12-SCLCR12
KM12-SCLCL09
KM12-SCLCL12
12
12
.591
.787
.315
.315
CCMT-32.52
CCMT-432
MS-1155
MS-1157
—
—
—
—
T15
T15
KM16-SCLCR09
KM16-SCLCR12
KM16-SCLCL09
KM16-SCLCL12
16
16
.787
.787
.394
.394
CCMT-32.52
CCMT-432
MS-1156
MS-1157
SKCP-343
—
SRS-3
—
T15
T15
146
Screw-On Inserts
SCM 50°
See pages 46-49
for inserts.
KM size
dKM
l1
f
KM12-SCMCN09
12
.787
0
CCMT-32.52
MS-1155
—
—
T15
KM16-SCMCN09
16
.787
0
CCMT-32.52
MS-1156
SKCP-343
SRS-3
T15
catalog number
SDG 90°
See pages 49-52
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SDGCR11
KM12-SDGCL11
12
.787
.315
DCMT-32.52
MS-1155
—
—
T15
KM16-SDGCR11
KM16-SDGCL11
16
.787
.394
DCMT-32.52
MS-1156
SKDP-343
SRS-3
T15
147
®
Screw-On Inserts
SDJ 93°
See pages 49-52
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SDJCR11
KM12-SDJCL11
12
.787
.315
DCMT-32.52
MS-1155
—
—
T15
KM16-SDJCR11
KM16-SDJCL11
16
.787
.394
DCMT-32.52
MS-1156
SKDP-343
SRS-3
T15
SDP 62° 30'
See pages 49-52
for inserts.
148
catalog number
KM size
dKM
KM12-SDPCN 11
12
.984
0
DCMT-32.52
MS-1155
—
—
T15
KM16-SDPCN 11
16
1.181
0
DCMT-32.52
MS-1156
SKDP-343
SRS-3
T15
l1
f
Screw-On Inserts
STG 90°
See pages 54-57
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-STGCR11
KM12-STGCR16
KM12-STGCL11
KM12-STGCL16
12
12
.591
.787
.315
.315
TCMT-21.51
TCMT-32.52
MS-1153
MS-1155
—
—
—
—
T7
T15
KM16-STGCR11
KM16-STGCR16
KM16-STGCL11
KM16-STGCL16
16
16
.787
.787
.394
.394
TCMT-21.51
TCMT-32.52
MS-1153
MS-1156
—
SKTP-343
—
SRS-3
T7
T15
STJ 93°
See pages 54-57
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-STJCR11
KM12-STJCR16
KM12-STJCL11
KM12-STJCL16
12
12
.591
.787
.315
.315
TCMT-21.51
TCMT-32.52
MS-1153
MS-1155
—
—
—
—
T7
T15
KM16-STJCR11
KM16-STJCR16
KM16-STJCL11
KM16-STJCL16
16
16
.787
.787
.394
.394
TCMT-21.51
TCMT-32.52
MS-1153
MS-1156
—
SKTP-343
—
SRS-3
T7
T15
149
®
Screw-On Inserts
SVG 90°
See pages 57-58
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SVGBR11
KM12-SVGBL11
12
.787
.315
VBMT-221
MS-1153
T7
KM16-SVGBR16
KM16-SVGBL16
16
1.181
.394
VBMT-332
MS-1155
T15
SVJ 93°
See pages 57-58
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SVJBR11
KM12-SVJBL11
12
.787
.315
VBMT-221
MS-1153
T7
KM16-SVJBR11
KM16-SVJBR16
KM16-SVJBL11
KM16-SVJBL16
16
16
.787
1.181
.394
.394
VBMT-221
VBMT-332
MS-1153
MS-1155
T7
T15
150
Screw-On Inserts
SWL 95°
See page 58
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-SWLCR06
KM12-SWLCL06
12
.591
.315
WCMT 32.52
MS-1155
—
—
T15
KM16-SWLCR06
KM16-SWLCL06
16
.787
.394
WCMT 32.52
MS-1156
SKWP-343
SRS-3
T15
Top Notch Profiling
NKL 95°
See page 63
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-NKLCL11
12
12
.984
.984
.315
.315
NPGR-51R
NPGR-51L
SM-885
—
—
SM-886
SRS-3
SRS-3
CM-68
CM-68
MS-1220
MS-1220
T25
T25
KM16-NKLCL11
16
16
1.181
1.181
.394
.394
NPGR-51R
NPGR-51L
SM-885
—
—
SM-886
SRS-3
SRS-3
CM-68
CM-68
MS-1220
MS-1220
T25
T25
KM12-NKLCR11
KM16-NKLCR11
151
®
Backturning
SSP
See page 128
for inserts.
catalog number
right hand
left hand
KM12-SSPR06
KM size
dKM
l1
f
KM12-SSPL06
12
12
.591
.591
.211
.211
S10P-22R...
S10P-22L...
CSTB-2.5
CSTB-2.5
T8
T8
KM16-SSPL06
16
16
.787
.787
.289
.289
S10P-22R...
S10P-22L...
CSTB-2.5
CSTB-2.5
T8
T8
KM16-SSPR06
STP
See page 128
for inserts.
catalog number
right hand
left hand
KM12-STPR16
l1
f
KM12-STPL16
12
12
.787
.787
.172
.172
T02P-32R...
T02P-32L...
CSTB-4SD
CSTB-4SD
T8
T8
KM16-STPL16
16
16
.787
.787
.251
.251
T02P-32R...
T02P-32L...
CSTB-4SD
CSTB-4SD
T8
T8
KM16-STPR16
152
KM size
dKM
On-Edge Threading and Grooving
STG Grooving
See page 130
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-STGL16
12
12
.787
.787
.315
.315
T20G32R…
T20G32L…
CSTB-4SD
CSTB-4SD
T8
T8
KM16-STGR16
16
16
.787
.787
.394
.394
T20G32R…
T20G32L…
CSTB-4SD
CSTB-4SD
T8
T8
KM12-STGR16
KM16-STGR16
STT Threading
See page 129
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
f
KM12-STTL16
12
12
.787
.787
.291
.291
T30T32002R
T30T32002L
CSTB-4SD
CSTB-4SD
T8
T8
KM16-STTL16
16
16
.787
.787
.370
.370
T30T32002R
T30T32002L
CSTB-4SD
CSTB-4SD
T8
T8
KM12-STTR16
KM16-STTR16
153
®
Top Notch Threading and Grooving
NE
See pages 72-76 and
104-110 for inserts.
catalog number
right hand
left hand
KM16-NER2
KM16-NEL2
KM size
dKM
l1
f
16
16
.787
.787
.394
.394
RH
NG-2L
LH
CM-147
NG-2R
CM-146
MS-1200
MS-1200
T10
T10
MS-1200
MS-1200
T10
T10
MS-1200
MS-1200
MS-1220
MS-1220
T10
T10
T25
T25
NS
See pages 72-76 and
104-110 for inserts.
catalog number
right hand
left hand
KM12-NSR2
KM12-NSL2
KM16-NSR2
KM16-NSL2
KM16-NSR3
KM16-NSL3
154
KM size
dKM
l1
f
12
12
.787
.787
.315
.315
NG-2R
16
16
16
16
.787
.787
1.181
1.181
.394
.394
.394
.394
NG-2R
RH
LH
CM-146
NG-2L
CM-147
CM-146
NG-2L
NG-3R
CM-147
CM-168
NG-3L
CM-169
Laydown Threading
LSS
See pages 84-96
for inserts.
catalog number
right hand
left hand
KM16-LSSR16
KM16-LSSL16
KM size
dKM
l1
f
16
16
.787
.787
.394
.394
LT-16ER
LT-16EL
S-SA3T
S-SA3T
SM-YE3
SM-YI3
CK-C3
CK-C3
T10
T10
A3 Deep Grooving
A3S
See pages 115-116
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
e
f
w
h
KM12-A3SR311
KM12-A3SL311
12
1.181
.472
.315
.118
.236
A3G0300M03
MS-1944
T25
KM16-A3SR311
KM16-A3SR411
KM16-A3SL311
KM16-A3SL411
16
16
1.181
1.181
.472
.472
.394
.394
.118
.157
.315
.315
A3G0300M03
A3G0400M04
MS-1944
MS-1944
T25
T25
155
®
Integral Cutoff
SVG
See page 129
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
e
f
h
KM16-SVGL13
12
12
.984
.984
.236
.236
.315
.315
.236
.236
V10G-2.52R...
V10G-2.52L...
CSTB-3S
CSTB-3S
T9
T9
KM16-SVGL13
16
16
1.181
1.181
.236
.236
.394
.394
.315
.315
V10G-2.52R...
V10G-2.52L...
CSTB-3S
CSTB-3S
T9
T9
KM12-SVGR13
KM16-SVGR13
A2 Integral Cutoff
A2S
See pages 121-123
for inserts.
catalog number
right hand
left hand
KM size
dKM
l1
e
f
w
h
KM12-A2SR211
KM12-A2SL211
12
1.181
.472
.315
.087
.240
A2022...
MS-1944
T25
KM16-A2SR211
KM16-A2SR216
KM16-A2SL211
KM16-A2SL216
16
16
1.181
1.181
.472
.669
.394
.394
.087
.087
.319
.319
A2022...
A2022...
MS-1944
MS-1944
T25
T25
156
A2 Modular Cutoff
BS
See pages 121-123
for inserts.
catalog number
right hand
left hand
KM size
dKM
m
j
h
A2
blade
KM12-BSR
KM12-BSL
12
.531
.272
.240
A2…
387019...
MS-1898
T27
KM16-BSR
KM16-BSL
16
.531
.350
.319
A2…
387019...
MS-1898
T27
NOTE: Blade and insert must be ordered separately.
A2 Blade – Cutoff
A2
See pages 121-123
for inserts.
catalog number
e
w
387019-016-28
.650
.063
A2016...
387019-022-23
387019-022-28
.453
.650
.087
.087
A2022...
A2022...
NOTE: These blades require careful insert installation using a plastic hammer. Assembly wrench 170.137 must be ordered separately and must be used for insert removal.
157
KM Micro Systems Tooling
®
Timing Heads
TIM
KM size
dKM
l1
d2
KM12-TIM-0915
12
.591
1.201
.354
KM16-TIM-1420
16
.787
1.457
.551
catalog number
h
Collet Chucks
ER
KM size
dKM
d1
d2
l1
h
KM12-ER11-030M
KM12-ER16-040M
12
12
.02 - .27
.02 - .40
.630
.866
1.181
1.575
.433
.669
LER11M
LER16M
ER11WEM
ER16WEM
20 ft lbs
30 ft lbs
KM16-ER11-030M
KM16-ER16-040M
KM16-ER20-045M
16
16
16
.02 - .27
.02 - .40
.02 - .51
.630
.866
1.102
1.181
1.575
1.772
.512
.669
.748
LER11M
LER16M
LER20M
ER11WEM
ER16WEM
ER20WEM
20 ft lbs
30 ft lbs
35 ft lbs
catalog number
158
Presetter CV Shanks – Offset (Static Tools)
ECTRA
catalog number
taper
KM size
dKM
l1
f1
spare parts
CV40-KM12-ECTRA
CV40
12
2.165
.236
KM12-NRPKG
CV40-KM16-ECTRA
CV40
16
2.362
.315
KM16-NRPKG
taper
KM size
dKM
l1
d1
spare parts
CV40-KM12-TRA
CV40
12
1.575
.866
KM12-NRPKG
CV40-KM16-TRA
CV40
16
1.969
.984
KM16-NRPKG
Presetter CV Shanks – on Center (Rotating)
TRA
catalog number
159
®
Blank
BN
KM size
dKM
l1
d1
KM12-BN31-33
12
1.299
1.201
KM16-BN37-40
16
1.575
1.457
KM size
dKM
l1
d1
catalog number
Plug
P
catalog number
KM12-P
12
.197
.472
KM16-P
16
.197
.630
NOTE: Should not be used as blank.
160
Spares and Accessories
torque screw
nut
catalog number
cap screw
torque screw
nut
cap screw
KM12-NSPKG
KM16-NSPKG
nut pin
torque screw
nut
catalog number
torque screw
nut
nut pin
KM12-NRPKG
KM16-NRPKG
Center Height Adjustment Feature:
KM micro flange mounts can adjust insert center height via a
cam pin to be purchased separately. To do this:
1. Remove the locating pin that is installed in the flange
mount clamping unit.
2. Install the adjusting pin in the toolblock-locating pin hole.
3. Install the flange mount clamping unit on to the toolblock,
ensuring the cam portion of the adjusting pin locates within
locating
pin
the slot on the back side of the flange.
4. To adjust, simply access the hex through the locating pin hole of
the flange unit and rotate to set center height.
5. Tighten the mounting bolts to the required torque for the specific bolt size.
catalog number
KM size
1026196
MICROCAM01
12
16
adjusting
cam
Lubrication:
Using a Torx wrench, back out the screw against the stops and generously apply grease to the threads and conical surfaces of
the components. Lightly apply a coating of grease to the taper surface. Gleitmo 805 is the recommended grease to use.
161
Spares and Accessories
®
Torx T-handle wrenches
T-wrenches with plastic grip handles and Torx drive are
designed for use with Kennametal toolholders. The individual
T-wrenches are available from stock.
catalog
number
TT-15 TT20
TT-25 TT-30
Torx wrench
Torx wrenches are used with Kennametal products
that use the Torx drive configuration in the screw
head. Wrenches (5 wrenches per bag) are shipped
in a plastic hardware bag.
Torx flag-type wrench
Torx wrenches are used with Kennametal products that use
the Torx drive configuration in the screw head. Wrenches
(5 wrenches per bag) are shipped in a plastic hardware bag.
catalog
number
KT-5
KT-6
KT-7
KT-8
KT-9
KT-10
KT-15
KT-20
KT-25
KT-27
KT-30
KT-40
KT-45
wrench drive
configuration
catalog number
FT-5
FT-6
FT-7
FT-8
FT-9
Torx drivers
In smaller sizes, Torx drivers can be somewhat easier to use
than the Torx flag-type wrenches shown above. Torx drivers are
shipped individually in the sizes shown here.
wrench drive
configuration
FT-10
FT-10-15
FT-15
FT-15-3.5
FT-20
wrench drive
configuration
catalog
number
DT-6
DT-7
DT-8
DT-9
DT-10
DT-15
wrench drive
configuration
Torx driver set
Torx drivers, as a set, come in the following sizes:
DT-6, DT-7, DT-8, DT-9, DT-10, and DT-15.
162
catalog
number
TWS-1
OD Tooling
page
Toolholder Identification System
for OD Toolholders . . . . . . . . . . . . . . .
164
Toolholders
Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top Notch Profiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top Notch Threading, Grooving, and Backturning. . . . . . . . .
LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A3 Deep Grooving and Profiling Toolholders . . . . . . . . . . . . . . .
A2 Cutoff Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backturning, Cutoff, Grooving, and Threading . . . . . . . . . . . . . .
Toolholder Identification System for
Backturning, Threading, Grooving, and
Cutoff Toolholders . . . . . . . . . . . . . . . . . . . . . .
166
171
172
173
174
176
177
178
Toolholders
Laydown Backturning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Grooving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
179
180
181
182
183
Need technical
assistance?
Call our
Tech Hotline!
163
Toolholder Selection System
top
clamping
KL pin top and hole
clamping
Top Notch
clamping
screw
clamping
®
K-Lock
C
D
K
L
R
S
T
V
W
Kenclamp®
2.
Insert Shape
BP pin only
Wedgelock®
1.
Insert Holding Method
5.
Hand of Tool
C
S
A
C R
3.
Tool Style or Lead Angle
A
F
L
T
B
G
M
U
*Kennametal standard only.
164
C
H
P
V
D
J
Q
E
▫
4.
Insert Clearance Angle
C
N
P
E
B
D
F
6.
Additional Information
K
R
Y
C — deep pocket for ceramic insert
S — single pocket locating wall
F — straight shank, no offset
Identification System for Backturning, Cutoff, Grooving, and Threading Toolholders
8.
Insert Size
number of
1/8ths of IC
– 10 3
B
9.
Qualified Surface
and Length
7.
Shank
Dimensions
B = qualified back and end, 4.5" long
D = qualified back and end, 6" long
Z = qualified back and end, 3.25" long
inch toolholders (two digits):
square shanks: The number
indicates the toolholder cross
section in 1/16-inch increments.
rectangular shanks: The first digit
indicates the number of 1/8 inches
of width. The second digit indicates
the number of 1/4 inches of height.
Qualified Set Dimensions
INCH
–
Lock Pin toolholders are qualified over nose radius of gage insert
in accordance with ANSI standards.
*Two-inch square shanks are qualified to ±.005.
Catalog numbers for qualified toolholders are overprinted
with a shade of yellow.
METRIC
Catalog numbers for utility toolholders are not overprinted with color.
Tolerances are ±.010 on “f” dimension and ±.125 on “l1”.
8.
Shank Width
(mm)
10.
Insert Size
(mm)
cutting edge
length in mm
– 16 16 F 09 Q
7.
Shank Height
(mm)
9.
Tool Length
F = 80 mm
H = 100 mm
K = 125 mm
M = 150 mm
NOTE: For Screw-On, Top Notch, LT threading, A3, and A2 toolholders,
please refer to appropriate toolholder sections of this catalog.
11.
Tool Qualifications
(mm)
Q = qualified back and end
F = qualified front and end
B = qualified front, back,
and end
165
Screw-On Toolholders
®
SCAC
See pages 45-49
for additional insert
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
b3
metric screw-on toolholders for Swiss Automatic machines
SCACR-0808M06Q
SCACR-1010M06Q
SCACR-1212M06Q
SCACR-1216F09Q
SCACR-1616K09Q
▫
▫
SCACL-0808M06Q SCACL-1010M06Q ▫
SCACL-1212M06Q ▫
CCMT 06 02 04
CCMT 06 02 04
CCMT 06 02 04
8
10
12
8
10
12
150
150
150
12
11
11
8
10
12
1,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
▫
▫
CCMT 09 T3 08
CCMT 09 T3 08
16
16
12
16
82
125
16
16
16
16
—
—
—
SKCP-343
—
SRS-3
MS-1155
MS-1156
FT-15
FT-15-3.5
CCMT-21.51
CCMT-21.51
CCMT-21.51
.281
.312
.375
.281
.312
.375
6.000
6.000
6.000
.44
.44
.44
.281
.312
.375
.09
.09
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
CCMT-32.52
CCMT-32.52
CCMT-32.52
.500
.625
.625
.500
.500
.625
6.000
3.250
4.500
.62
.62
.50
.500
.625
.625
—
—
—
—
—
SKCP-343
—
—
SRS-3
MS-1155
MS-1155
MS-1156
FT-15
FT-15
FT-15-3.5
h
b
l1
l2
f
b3
SCACL-1216F09Q
SCACL-1616K09Q
inch screw-on toolholders for Swiss Automatic machines
SCACR-04.52D
SCACR-052D
SCACR-062D
SCACR-083D
SCACR-523Z
SCACR-103B
▫
SCACL-04.52D
SCACL-052D
SCACL-062D
SCACL-083D
SCACL-523Z
SCACL-103B
▫
▫
SCLC-F
See pages 45-49
geometry styles.
catalog number
right hand
left hand
SCLCRF-0808M06Q SCLCLF-0808M06Q SCLCRF-1010M06Q SCLCLF-1010M06Q ▫
SCLCRF-1212M06Q SCLCLF-1212M06Q ▫
CCMT 06 02 04
CCMT 06 02 04
CCMT 06 02 04
8
10
12
8
10
12
150
150
150
12
11
11
8
10
12
1,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
SCLCRF-1616K09Q SCLCLF-1616K09Q CCMT 09 T3 08
16
16
125
16
16
—
SKCP-343
SRS-3
MS-1156
FT-15-3.5
CCMT-21.51
CCMT-21.51
CCMT-21.51
CCMT-21.51
.281
.312
.375
.500
.281
.312
.375
.500
6.000
6.000
6.000
6.000
.50
.50
.50
.50
.281
.312
.375
.500
.09
.06
—
—
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
FT-7
CCMT-32.52
CCMT-32.52
CCMT-32.52
.500
.625
.625
.500
.500
.625
6.000
3.250
4.500
.62
.62
.50
.500
.625
.625
.09
—
—
—
—
SKCP-343
—
—
SRS-3
MS-1155
MS-1155
MS-1156
FT-15
FT-15
FT-15-3.5
SCLCRF-04.52D
SCLCRF-052D
SCLCRF-062D
SCLCRF-082D
SCLCRF-083D
SCLCRF-523Z
SCLCRF-103B
– stocked
166
SCLCLF-04.52D
SCLCLF-052D
SCLCLF-062D
SCLCLF-082D
SCLCLF-083D
SCLCLF-523Z
SCLCLF-103B
▫
▫
SDAC
See pages 49-52
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
b3
DCMT 07 02 04
DCMT 07 02 04
DCMT 07 02 04
8
10
12
8
10
12
150
150
150
16
16
16
8
10
12
1,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
DCMT 11 T3 08
DCMT 11 T3 08
12
16
12
16
150
125
22
22
12
16
1,5
—
—
SKDP-343
—
SRS-3
MS-1155
MS-1156
FT-15
FT-15-3.5
DCMT-21.51
DCMT-21.51
.375
.500
.375
.500
6.000
6.000
.62
.62
.375
.500
—
—
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
DCMT-32.52
DCMT-32.52
.500
.625
.500
.625
6.000
4.500
.88
.88
.500
.625
.06
—
—
SKDP-343
—
SRS-3
MS-1155
MS-1156
FT-15
FT-15-3.5
h
b
l1
l2
f
b3
SDACR-1212M11Q SDACR-1616K11Q SDACR-0808M07Q
SDACR-1010M07Q
SDACR-1212M07Q
▫
▫
SDACL-1212M11Q SDACL-1616K11Q ▫
SDACL-0808M07Q
SDACL-1010M07Q
SDACL-1212M07Q
SDACR-062D
SDACR-082D
SDACR-083D
SDACR-103B
SDACL-062D
SDACL-082D
SDACL-083D
SDACL-103B
SDJC-F
See pages 49-52
geometry styles.
catalog number
right hand
left hand
SDJCRF-0808M07Q SDJCLF-0808M07Q SDJCRF-1010M07Q SDJCLF-1010M07Q SDJCRF-1212M07Q SDJCLF-1212M07Q ▫
DCMT 07 02 04
DCMT 07 02 04
DCMT 07 02 04
8
10
12
8
10
12
150
150
150
16
16
16
8
10
12
1,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
SDJCRF-1616K11Q SDJCLF-1616K11Q ▫
DCMT 11 T3 08
16
16
125
22
16
—
SKDP-343
SRS-3
MS-1156
FT-15-3.5
DCMT-21.51
DCMT-21.51
.375
.500
.375
.500
6.000
6.000
.62
.62
.375
.500
—
—
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
DCMT-32.52
DCMT-32.52
.500
.625
.500
.625
6.000
4.500
.88
.88
.500
.625
—
—
—
SKDP-343
—
SRS-3
MS-1155
MS-1156
FT-15
FT-15-3.5
SDJCRF-062D
SDJCRF-082D
SDJCRF-083D
SDJCRF-103B
SDJCLF-062D
SDJCLF-082D
SDJCLF-083D
SDJCLF-103B
– stocked
167
®
SDPC
See pages 49-52
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
10
12
12
16
10
12
12
16
150
150
150
125
16
16
22
22
5
6
6
8
—
—
—
SKDP-343
—
—
—
SRS-3
MS-1153
MS-1153
MS-1155
MS-1156
FT-7
FT-7
FT-15
FT-15-3.5
DCMT-21.51
DCMT-21.51
.375
.500
.375
.500
6.000
6.000
.62
.62
.188
.250
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
DCMT-32.52
DCMT-32.52
.500
.625
.500
.625
6.000
4.500
.88
.88
.250
.312
—
SKDP-343
—
SRS-3
MS-1155
MS-1156
FT-15
FT-15-3.5
SDPCN-1010M07Q
SDPCN-1212M07Q
SDPCN-1212M11Q
SDPCN-1616K11Q
DCMT 07 02 04
DCMT 07 02 04
DCMT 11 T3 08
DCMT 11 T3 08
SDPCN-062D
SDPCN-082D
SDPCN-083D
SDPCN-103B
STAC
See pages 54-57
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
b3
TCMT 11 02 04
TCMT 11 02 04
TCMT 11 02 04
10
12
16
10
12
16
150
150
125
16
16
16
10
12
16
2,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
TCMT 16 T3 08
16
16
125
20
16
—
SKTP-343
SRS-3
MS-1156
FT-15-3.5
TCMT-21.51
TCMT-21.51
TCMT-21.51
.375
.500
.625
.375
.500
.625
6.000
6.000
4.500
.62
.62
.62
.375
.500
.625
.09
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
TCMT-32.52
.625
.625
4.500
.75
.625
—
SKTP-343
SRS-3
MS-1156
FT-15-3.5
STACR-1010M11Q
STACR-1212M11Q
STACR-1616K11Q
STACR-1616K16Q
STACL-1010M11Q
STACL-1212M11Q
STACL-1616K11Q
STACL-1616K16Q
STACR-062D
STACR-082D
STACR-102B
STACR-103B
– stocked
168
STACL-062D
STACL-082D
STACL-102B
STACL-103B
STJC-F
See pages 54-57
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
b3
STJCRF-1010M11Q STJCLF-1010M11Q STJCRF-1212M11Q STJCLF-1212M11Q STJCRF-1616K11Q STJCLF-1616K11Q TCMT 11 02 04
TCMT 11 02 04
TCMT 11 02 04
10
12
16
10
12
16
150
150
125
16
16
16
10
12
16
2,5
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
STJCRF-1616K16Q STJCLF-1616K16Q TCMT 16 T3 08
16
16
125
20
16
—
SKTP-343
SRS-3
MS-1156
FT-15-3.5
TCMT-21.51
TCMT-21.51
TCMT-21.51
.375
.500
.625
.375
.500
.625
6.000
6.000
4.500
.62
.62
.62
.375
.500
.625
.09
—
—
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
TCMT-32.52
.625
.625
4.500
.75
.625
—
SKTP-343
SRS-3
MS-1156
FT-15-3.5
STJCRF-062D
STJCRF-082D
STJCRF-102B
STJCRF-103B
STJCLF-062D
STJCLF-082D
STJCLF-102B
STJCLF-103B
SVAB
See pages 57-58
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
VBMT 11 03 04
VBMT 11 03 04
10
12
10
12
150
150
22
22
10
12
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
VBMT 16 04 08
16
16
125
30
16
—
—
MS-1155
FT-15
VBMT-221
VBMT-221
.375
.500
.375
.500
6.000
6.000
.88
.88
.375
.500
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
VBMT-332
.625
.625
4.500
1.38
.625
—
—
MS-1155
FT-15
SVABR-1010M11Q
SVABR-1212M11Q
SVABR-1616K16Q
SVABL-1010M11Q
SVABL-1212M11Q
SVABL-1616K16Q
▫
▫
▫
SVABR-062D
SVABR-082D
SVABR-103B
SVABL-062D
SVABL-082D
SVABL-103B
– stocked
169
®
SVJB-F
See pages 57-58
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
SVJBRF-1010M11Q SVJBLF-1010M11Q ▫
SVJBRF-1212M11Q SVJBLF-1212M11Q VBMT 11 03 04
VBMT 11 03 04
10
12
10
12
150
150
23
23
10
12
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
SVJBRF-1616K16Q SVJBLF-1616K16Q VBMT 16 04 08
16
16
125
31
16
—
—
MS-1155
FT-15
VBMT-221
VBMT-221
.375
.500
.375
.500
6.000
6.000
.94
.94
.375
.500
—
—
—
—
MS-1153
MS-1153
FT-7
FT-7
VBMT-332
.625
.625
4.500
1.44
.625
—
—
MS-1155
FT-15
h
b
l1
l2
f
SVJBRF-062D
SVJBRF-082D
SVJBRF-103B
SVJBLF-062D
SVJBLF-082D
SVJBLF-103B
SWLC-F
See page 58
geometry styles.
catalog number
right hand
left hand
SWLCRF-1010M04Q SWLCLF-1010M04Q SWLCRF-1212M04Q SWLCLF-1212M04Q SWLCRF-1616K04Q SWLCLF-1616K04Q WCMT 04 02 04
WCMT 04 02 04
WCMT 04 02 04
10
12
16
10
12
16
150
150
125
12
12
12
10
12
16
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
SWLCRF-1616K06Q SWLCLF-1616K06Q WCMT 06 T3 08
16
16
125
16
16
SKWP-343
SRS-3
MS-1156
FT-15-3.5
WCMT-21.51
WCMT-21.51
WCMT-21.51
.375
.500
.625
.375
.500
.625
6.000
6.000
4.500
.50
.50
.50
.375
.500
.625
—
—
—
—
—
—
MS-1153
MS-1153
MS-1153
FT-7
FT-7
FT-7
WCMT-32.52
.625
.625
4.500
.62
.625
SKWP-343
SRS-3
MS-1156
FT-15-3.5
SWLCRF-062D
SWLCRF-082D
SWLCRF-102B
SWLCRF-103B
– stocked
170
SWLCLF-062D
SWLCLF-082D
SWLCLF-102B
SWLCLF-103B
Top Notch Profiling Toolholders
NKL-F
See page 63
geometry styles.
catalog number
right hand
left hand
*NKLCRF/LF-0805D and NKLCR/LF-1212M11Q only.
h
b
l1
l2
f
b3
12
12
16
16
12
12
16
16
150
150
125
125
24
24
24
24
12
12
16
16
3,8
3,8
—
—
SM-885
—
SM-885
—
—
SM-886
—
SM-886
MS-959
MS-959
MS-959
MS-959
CM-68
CM-68
CM-68
CM-68
MS-524
MS-524
MS-524
MS-524
.500
.500
.625
.625
.500
.500
.625
.625
6.000
6.000
4.500
4.500
.75
.75
.75
.75
.500
.500
.630
.630
.150
.150
—
—
SM-285
—
SM-285
—
—
SM-286
—
SM-286
S-959
S-959
S-959
S-959
CM-180
CM-181
CM-180
CM-181
S-524
S-524
S-524
S-524
metric toolholders for Swiss Automatic machines
NKLCRF-1212M11Q NKLCRF-1616K11Q NKLCLF-1212M11Q ▫
NKLCLF-1616K11Q ▫
KCUX11 03 05
KCUX11 03 05
KCUX11 03 05
KCUX11 03 05
inch toolholders for Swiss Automatic machines
NKLCRF-0805D
NKLCRF-1005B
NPGR-51R
NKLCLF-0805D
NPGR-51L
NKLCLF-1005B
NPGR-51L
NPGR-51R
– stocked
Reduce Downtime with KM ®
Quick-Change Tooling
AR
Tooling Sys
tems
™
ODUL
E
KM M
HANG
C
K
S
IC
QU
YSTEM
S
G
IN
L
TOO
KM quick-change tooling is a round, centerline system designed
for use in both rotating and non-rotating machining applications.
Today, on average, only 20 percent of machining time is cutting
time. The rest of the time is taken up by tool change, insert
change, and setup time. KM tooling, combined with an innovative
machine utilization strategy, can significantly reduce your downtime. The bottom line is increased machining productivity.
For more detailed information, contact Kennametal and request
either Paper Catalog A00-028 or CD Catalog #9020CD.
0030
Catalog
171
Top Notch Threading, Grooving, and Backturning
®
NAS
See pages 72-76 and
104-110 for additional
insert geometry styles.
catalog number
right hand
left hand
without shim
*
h
b
l1
d
l2
f**
b3
f1
j
10
10
12
12
10
10
12
12
150
150
150
150
3,51
3,51
3,51
3,51
20
20
20
20
10
10
12
12
1,8
1,8
—
—
9
9
9
9
22
22
—
—
CM-182
—
CM-182
—
—
CM-183
—
CM-183
MS-1025
MS-1025
MS-1025
MS-1025
16
16
16
16
125
125
5,51
5,51
32
32
16
16
—
—
12
12
—
—
CM-184
—
—
CM-185
MS-412
MS-412
.375
.375
.500
.500
.375
.375
.500
.500
6.000
6.000
6.000
6.000
.138
.138
.138
.138
.75
.75
.75
.75
.375
.375
.500
.500
.070
.070
—
—
.35
.35
.35
.35
.88
.88
—
—
CM-182
—
CM-182
—
—
CM-183
—
CM-183
S-310
S-310
S-310
S-310
.625
.625
.625
.625
4.500
4.500
.210
.210
1.25
1.25
.625
.625
—
—
.50
.50
—
—
CM-184
—
—
CM-185
S-412
S-412
NASR-1010M2Q
NASR-1212M2Q
NASR-1616K3Q
NASL-1010M2Q
NASL-1212M2Q
NG-2R
NG-2L
NG-2R
NG-2L
NASL-1616K3Q
NG-3R***
NG-3L***
NASR-062D
NASR-082D
NASR-103B
NASL-062D
NASL-082D
NG-2R
NG-2L
NG-2R
NG-2L
NASL-103B
NG-3R***
NG-3L***
* Gage insert specified; other styles of threading and grooving inserts of the same size may be used in toolholders.
** Over sharp point of grooving insert.
***Backturning in #3 Top Notch only. See page 109 for NP-3002RK and NP-3012RK inserts.
– stocked
172
LT Threading Toolholders
LSA
See pages 84-96
geometry styles.
catalog number
right hand
left hand
h
b
l1
l2
f
b3
LT-16ER
LT-16EL
LT-16ER
LT-16EL
12
12
16
16
12
12
16
16
85
85
100
100
22
22
25
25
16
16
16
16
4
4
—
—
S-SA3T
—
S-SA3T
—
S-SA3T SM-YE3
S-SA3T
—
—
—
—
SM-YI3
—
—
—
—
S-SY3T CK-C3
S-SY3T CK-C3
FT-10
FT-10
FT-10-15
FT-10-15
LT-16ER
LT-16EL
LT-16ER
LT-16EL
.500
.500
.625
.625
.500
.500
.625
.625
3.250
3.250
5.000
5.000
.87
.87
1.20
1.20
.630
.630
.630
.630
.130
.130
—
—
S-SA3T SM-YE3
S-SA3T
—
S-SA3T SM-YE3
S-SA3T
—
—
SM-YI3
—
SM-YI3
S-SY3T
—
S-SY3T
—
S-SY3T CK-C3
S-SY3T CK-C3
FT-10
FT-10
FT-10-15
FT-10-15
LSASR-1212N16
LSASR-1616H16
LSASL-1212N16
LSASL-1616H16
LSASR-83
LSASR-103
LSASL-83
LSASL-103
NOTE: For complete guidelines on shim selection, see pages 692-693 in Catalog 1010.
– stocked
Remember, proper shim selection is important!
Always verify the supplied shim
is correct for the thread to be cut.
173
A3 Deep Grooving and Profiling Toolholders
®
A3SM / A3SS
See pages 115-116
for inserts.
catalog number
right hand
left hand
left-hand toolholder shown
*f = insert cutting width2 + f1
cutting
width
range
“a”
max.
cutting
depth
“t”
h
3
3
3
3
3,00
3,00
3,00
3,00
10
10
10
16
16
20
25
16
16
20
25
16
110
125
150
110
14,8
18,6
23,8
14,8
20
20
20
28
24,5
22,5
29,5
26,5
4
—
—
4
MS-1944
MS-1944
MS-1595
MS-1944
KT-25
KT-25
KT-30
KT-25
44
44
150
44
5
5
17
5
4
4
4
4
4,00
4,00
4,00
4,00
10
10
10
16
16
20
25
16
16
20
25
16
110
125
150
110
14,3
18,3
23,3
14,3
20
20
20
29
24,5
24,5
29,5
26,5
4
—
—
4
MS-1944
MS-1944
MS-1595
MS-1944
KT-25
KT-25
KT-30
KT-25
44
44
150
44
5
5
17
5
3
3
3
3
.087 - .125
.087 - .125
.087 - .125
.087 - .125
.39
.39
.63
.63
.375
.500
.500
.625
.375
.500
.500
.625
3.500
3.500
3.500
4.500
.340
.465
.465
.590
.79
.79
1.10
1.10
.60
.60
1.04
1.04
.08
—
.32
.16
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
35
35
4
4
4
4
4
4
4
.119 - .159
.119 - .159
.119 - .159
.39
.51
.75
.500
.625
.625
.500
.625
.625
3.500
4.500
4.500
.450
.578
.578
1.10
1.10
1.65
1.04
1.04
1.04
.29
.16
.16
MS-1944
MS-1944
MS-1595
KT-25
KT-25
KT-30
35
35
115
4
4
13
insert
seat
size
b
l1
f1
l2
h2
max clamp
screw torque
h3
(in.-lbs.) (Nm)
A3SMR-1616J03-10
A3SMR-2020K03-10
A3SMR-2525M03-10
A3SMR-1616J03-16
A3SMR-1616J04-10
A3SMR-2020K04-10
A3SMR-2525M04-10
A3SMR-1616J04-16
A3SML-1616J03-10
A3SML-2020K03-10
A3SML-2525M03-10
A3SML-1616J03-16
A3SML-1616J04-10
A3SML-2020K04-10
A3SML-2525M04-10
A3SML-1616J04-16
A3SSR-0603-10
A3SSR-0803-10
A3SSR-0808-16
A3SSR-1003-16
A3SSR-0804-10
A3SSR-1004-13
A3SSR-1004-19
A3SSL-0603-10
A3SSL-0803-10
A3SSL-0808-16
A3SSL-1003-16
A3SSL-0804-10
A3SSL-1004-13
A3SSL-1004-19
For inch shank toolholders, seat size 4 inserts can be used in seat size 3 and 4 toolholders, within cutting width range.
– stocked
174
A3 Integral Shank Profiling Toolholders — Metric
A3DS
Round/Square Shaped Inserts
right-hand toolholder
shown — left-hand is
mirror image
See pages 115-116
for inserts.
catalog number
right hand
left hand
A3DSR-1616J04
A3DSR-2020K04
A3DSL-1616J04
A3DSL-2020K04
insert
seat
size
cutting
width
a
h
b
l1
f
l2
h2
3+4
3+4
3,00 - 4,05
3,00 - 4,05
16
20
16
20
110
125
22
26
34
34
22,5
26,5
max. clamp
screw
torque
(Nm)
MS-1944
MS-1944
KT-25
KT-25
5
5
A3PS / A3US
Toolholder for V-Shape Inserts with 93° and 117° 30' Approach Angles
93° right-hand shown —
left-hand is mirror image
See page 116
for inserts.
catalog number
right hand
left hand
k°
h
b
l1
f
l2
h2
max. clamp
screw
torque
(Nm)
117° 30' approach
A3PSR-2020K04
A3PSR-2525M04
A3PSL-2020K04
A3PSL-2525M04
117° 30'
117° 30'
20
25
20
25
125
150
25
32
34
34
26,5
31,5
MS-1595
MS-1595
KT-30
KT-30
17
17
A3USL-2525M04
93°
25
25
150
32
40
31,5
MS-1595
KT-30
17
93° approach
A3USR-2525M04
NOTE: Only V-shaped inserts can be used in 117° 30' and 93° toolholders.
– stocked
175
Shank Toolholders for A2 Cutoff Inserts
®
A3SC
See pages 121-123
for inserts.
catalog number
right hand
left hand
insert cutting width
seat
range “a”
size
in
mm
max.
cutting
depth dmax h
“t”max
b
l1
l2
f
h2
h3
max clamp
screw torque
r
(in.-lbs.) (Nm)
metric shank toolholders for A2 cutoff inserts
A3SCR-0808X01-10
A3SCR-1010X01-10
A3SCR-1212X01-10
A3SCR-1010J01-16
A3SCR-1212J01-16
A3SCR-1616J01-16
A3SCR-1010X02-10
A3SCR-1212X02-10
A3SCR-1212J02-16
A3SCR-1616J02-16
A3SCR-1010X03-10
A3SCR-1212X03-10
A3SCR-1212J03-16
A3SCR-1616J03-16
A3SCR-1010X04-10
A3SCR-1212X04-10
A3SCR-1212J04-16
A3SCR-1616J04-16
A3SCL-0808X01-10
A3SCL-1010X01-10
A3SCL-1212X01-10
A3SCL-1010J01-16
A3SCL-1212J01-16
A3SCL-1616J01-16
A3SCL-1010X02-10
A3SCL-1212X02-10
A3SCL-1212J02-16
A3SCL-1616J02-16
A3SCL-1010X03-10
A3SCL-1212X03-10
A3SCL-1212J03-16
A3SCL-1616J03-16
A3SCL-1010X04-10
A3SCL-1212X04-10
A3SCL-1212J04-16
A3SCL-1616J04-16
1
1
1
1
1
1
.063
.063
.063
.063
.063
.063
1,6
1,6
1,6
1,6
1,6
1,6
10
10
10
16
16
16
20
20
20
42
42
42
8
10
12
10
12
16
8
10
12
10
12
16
130
130
130
110
110
110
20
20
20
28
30
30
8,1
10,1
12,1
10,1
12,1
16,1
14,5
14,5
14,5
26,5
26,5
26,5
4
2
—
10
8
4
11
11
11
22
22
22
191.916
MS-1160
MS-1160
MS-1488
MS-1944
MS-1944
KT-15
KT-20
KT-20
KT-15
KT-25
KT-25
35
35
35
35
44
44
4
4
4
4
5
5
2
2
2
2
.087
.087
.087
.087
2,2
2,2
2,2
2,2
10
10
16
16
20
20
42
42
10
12
12
16
10
12
12
16
130
130
110
110
20
20
30
30
10,2
12,2
12,2
16,2
14,5
14,5
26,5
26,5
2
—
8
4
11
11
22
22
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
3
3
3
3
.118
.118
.118
.118
3,0
3,0
3,0
3,0
10
10
16
16
20
20
52
52
10
12
12
16
10
12
12
16
130
130
110
110
20
20
30
30
10,4
12,4
12,4
16,4
14,5
14,5
26,5
26,5
2
—
8
4
11
11
27
27
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
4
4
4
4
.157
.157
.157
.157
4,0
4,0
4,0
4,0
10
10
16
16
20
20
52
52
10
12
12
16
10
12
12
16
130
130
110
110
20
20
30
30
10,4
12,4
12,4
16,4
14,5
14,5
26,5
26,5
2
—
8
4
11
11
27
27
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
1
1
1
1
1
1
.063
.063
.063
.063
.063
.063
1,6
1,6
1,6
1,6
1,6
1,6
.39
.39
.39
.63
.63
.63
.79
.79
.79
1.65
1.65
1.65
5/16
3/8
1/2
3/8
1/2
5/8
5/16 6
.79
3/8
6
.79
1/2
6
.79
3/8 3 1/2 1.10
1/2 3 1/2 1.18
5/8 4 1/2 1.18
.316 .57 .16 .43
.379 .60 .12 .43
.504 .60 — .43
.379 1.04 .41 .87
.504 1.04 .29 .87
.629 1.04 .16 .87
191.916
MS-1160
MS-1160
MS-1488
MS-1944
MS-1944
KT-15
KT-20
KT-20
KT-15
KT-25
KT-25
35
35
35
35
44
44
4
4
4
4
5
5
2
2
2
2
.087
.087
.087
.087
2,2
2,2
2,2
2,2
.39
.39
.63
.63
.79
.79
1.65
1.65
3/8
1/2
1/2
5/8
3/8
6
1/2
6
1/2 3 1/2
5/8 4 1/2
.79
.79
1.14
1.18
.384 .60 .12
.509 .60 —
.509 1.04 .29
.635 1.04 .16
.43
.43
.87
.87
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
3
3
3
3
.118
.118
.118
.118
3,0
3,0
3,0
3,0
.39
.39
.63
.63
.79
.79
2.05
2.05
3/8
1/2
1/2
5/8
3/8
6
1/2
6
1/2 3 1/2
5/8 4 1/2
.79
.79
1.14
1.18
.389 .60 .12
.514 .60 —
.514 1.04 .29
.639 1.04 .16
.43
.43
1.06
1.06
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
4
4
4
4
.157
.157
.157
.157
4,0
4,0
4,0
4,0
.39
.39
.63
.63
.79
.79
2.05
2.05
3/8
1/2
1/2
5/8
3/8
6
1/2
6
1/2 3 1/2
5/8 4 1/2
.79
.79
1.14
1.18
.389 .60 .12
.514 .60 —
.514 1.04 .29
.639 1.04 .16
.43
.43
1.06
1.06
MS-1160
MS-1160
MS-1944
MS-1944
KT-20
KT-20
KT-25
KT-25
35
35
44
44
4
4
5
5
inch shank toolholders for A2 cutoff inserts
A3SCR-0501-10
A3SCR-0601-10
A3SCR-0801-10
A3SCR-0601-16
A3SCR-0801-16
A3SCR-1001-16
A3SCR-0602-10
A3SCR-0802-10
A3SCR-0802-16
A3SCR-1002-16
A3SCR-0603-10
A3SCR-0803-10
A3SCR-0803-16
A3SCR-1003-16
A3SCR-0604-10
A3SCR-0804-10
A3SCR-0804-16
A3SCR-1004-16
– stocked
176
A3SCL-0501-10
A3SCL-0601-10
A3SCL-0801-10
A3SCL-0601-16
A3SCL-0801-16
A3SCL-1001-16
A3SCL-0602-10
A3SCL-0802-10
A3SCL-0802-16
A3SCL-1002-16
A3SCL-0603-10
A3SCL-0803-10
A3SCL-0803-16
A3SCL-1003-16
A3SCL-0604-10
A3SCL-0804-10
A3SCL-0804-16
A3SCL-1004-16
OD Tooling
Backturning, Threading,
Grooving, and Cutoff Toolholders
page
Toolholder Identification System . . . . . . . . .
178
Toolholders
Laydown Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Threading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Grooving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
On-Edge Cutoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
179
180
181
182
183
177
®
Identification System for Backturning, Cutoff, Grooving, and Threading Toolholders
6.
Shank Width
(mm)
8.
Insert Size
(mm)
cutting edge
length
12 12 M 09 Q
5.
Shank Height
(mm)
7.
Tool Length
F = 80 mm
H = 100 mm
K = 125 mm
M = 150 mm
3.
Tool Style
1.
Screw-On Insert
Holding
G = grooving
P = profiling or backturning
T = threading
METRIC
S
T
G R –
2.
Insert Shape
S = square backturning
T = triangle
V = 35° diamond grooving
INCH
4.
Hand of Tool
R
L
6.
Insert Size
N
number of
1/8ths of IC
08 3
5.
Shank
Dimensions
D
7.
Qualified Surface
and Length
B = qualified back and end, 4.5" long
D = qualified back and end, 6" long
Z = qualified back and end, 3.25" long
inch toolholders (two digits):
square shanks: The number
indicates the toolholder cross
section in 1/16-inch increments.
rectangular shanks: The first digit
indicates the number of 1/8 inches
of width. The second digit indicates
the number of 1/4 inches of height.
178
9.
Tool Qualifications
(mm)
Q = qualified back and end
F = qualified front and end
B = qualified front, back,
and end
Laydown Backturning Toolholders
SSP
See page 128
for additional
geometry styles.
catalog number
right hand
left hand
insert
h
b
l1
f
SSPR-1010M06Q
SSPR-1212M06Q
SSPR-1616K06Q
SSPL-1010M06Q
S10P 06 03R
S10P 06 03L
10
10
10
10
150
150
7,5
7,5
CSTB-2.5
CSTB-2.5
FT-8
FT-8
SSPL-1212M06Q
S10P 06 03R
S10P 06 03L
12
12
12
12
150
150
9,5
9,5
CSTB-2.5
CSTB-2.5
FT-8
FT-8
SSPL-1616K06Q
S10P 06 03R
S10P 06 03L
16
16
16
16
125
125
13,5
13,5
CSTB-2.5
CSTB-2.5
FT-8
FT-8
SSPR-062D
SSPR-082D
SSPR-102B
SSPL-062D
S10P-22R
S10P-22L
.375
.375
.375
.375
6.000
6.000
.281
.281
CSTB-2.5
CSTB-2.5
FT-8
FT-8
SSPL-082D
S10P-22R
S10P-22L
.500
.500
.500
.500
6.000
6.000
.406
.406
CSTB-2.5
CSTB-2.5
FT-8
FT-8
SSPL-102B
S10P-22R
S10P-22L
.625
.625
.625
.625
4.500
4.500
.531
.531
CSTB-2.5
CSTB-2.5
FT-8
FT-8
– stocked
179
On-Edge Backturning Toolholders
®
STP
See page 128
for additional
geometry styles.
catalog number
right hand
left hand
insert
h
b
l1
l2
f
h3
STPR-1010M16Q
STPR-1212M16Q
STPR-1616K16Q
STPL-1010M16Q
T02P 16 03R
T02P 16 03L
10
10
10
10
150
150
15
15
6
6
5
5
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STPL-1212M16Q
T02P 16 03R
T02P 16 03L
12
12
12
12
150
150
15
15
8
8
3
3
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STPL-1616K16Q
T02P 16 03R
T02P 16 03L
16
16
16
16
125
125
15
15
12
12
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STPR-063D
STPR-083D
STPR-103B
– stocked
180
STPL-063D
T02P-32R
T02P-32L
.375
.375
.375
.375
6.000
6.000
.59
.59
.219
.219
.20
.20
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STPL-083D
T02P-32R
T02P-32L
.500
.500
.500
.500
6.000
6.000
.59
.59
.344
.344
.08
.08
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STPL-103B
T02P-32R
T02P-32L
.625
.625
.625
.625
4.500
4.500
.59
.59
.469
.469
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
On-Edge Threading Toolholders
STT
See page 129
for additional
geometry styles.
catalog number
right hand
left hand
insert
h
b
l1
l2
f
h3
T30T 16 03R
T30T 16 03L
T30T 16 03R
T30T 16 03L
T30T 16 03R
T30T 16 03L
10
10
12
12
16
16
10
10
12
12
16
16
150
150
150
150
125
125
16,5
16,5
16,5
16,5
16,5
16,5
9,5
9,5
11,5
11,5
15,5
15,5
2,0
2,0
—
—
—
—
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
.375
.375
.500
.500
.625
.625
.375
.375
.500
.500
.625
.625
6.000
6.000
6.000
6.000
4.500
4.500
.65
.65
.65
.65
.65
.65
.355
.355
.480
.480
.605
.605
.08
.08
—
—
—
—
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
CSTB-4SD
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
STTR-1010M16Q
STTR-1212M16Q
STTR-1616K16Q
STTL-1010M16Q
▫
STTL-1212M16Q
▫
STTL-1616K16Q
▫
STTR-063D
STTR-083D
STTR-103B
STTL-063D
▫
STTL-083D
▫
STTL-103B
▫
T30T-32R
T30T-32L
T30T-32R
T30T-32L
T30T-32R
T30T-32L
– stocked
181
On-Edge Grooving Toolholders
®
STG
See page 130
for additional
geometry styles.
catalog number
right hand
left hand
insert
h
b
l1
l2
f
h3
STGR-1010M16Q
STGR-1212M16Q
STGR-1616K16Q
STGL-1010M16Q
T20G 16 03R
T20G 16 03L
10
10
10
10
150
150
18,5
18,5
10
10
2,0
2,0
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STGL-1212M16Q
T20G 16 03R
T20G 16 03L
12
12
12
12
150
150
18,5
18,5
12
12
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STGL-1616K16Q
T20G 16 03R
T20G 16 03L
16
16
16
16
125
125
18,5
18,5
16
16
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STGR-063D
STGR-083D
STGR-103B
– stocked
182
STGL-063D
T20G-32R
T20G-32L
.375
.375
.375
.375
6.000
6.000
.73
.73
.375
.375
.08
.08
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STGL-083D
T20G-32R
T20G-32L
.500
.500
.500
.500
6.000
6.000
.73
.73
.500
.500
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
STGL-103B
T20G-32R
T20G-32L
.625
.625
.625
.625
4.500
4.500
.73
.73
.625
.625
—
—
CSTB-4SD
CSTB-4SD
FT-8
FT-8
On-Edge Cutoff Toolholders
SVG
See page 129
for additional
geometry styles.
catalog number
right hand
left hand
insert
h
b
l1
l2
f
V10G 13 03R
10
10
10
10
150
150
23
23
10
10
CSTB-3S
CSTB-3S
FT-9
FT-9
V10G 13 03R
12
12
12
12
150
150
23
23
12
12
CSTB-3S
CSTB-3S
FT-9
FT-9
V10G 13 03R
16
16
16
16
125
125
23
23
16
16
CSTB-3S
CSTB-3S
FT-9
FT-9
V10G-2.52R
.375
.375
.375
.375
6.000
6.000
.91
.91
.375
.375
CSTB-3S
CSTB-3S
FT-9
FT-9
V10G-2.52R
.500
.500
.500
.500
6.000
6.000
.91
.91
.500
.500
CSTB-3S
CSTB-3S
FT-9
FT-9
V10G-2.52R
.625
.625
.625
.625
4.500
4.500
.91
.91
.625
.625
CSTB-3S
CSTB-3S
FT-9
FT-9
SVGR-1010M13Q
SVGR-1212M13Q
SVGR-1616K13Q
SVGL-1010M13Q
V10G 13 03L
SVGL-1212M13Q
V10G 13 03L
SVGL-1616K13Q
V10G 13 03L
SVGR-062.5D
SVGR-082.5D
SVGR-102.5B
SVGL-062.5D
V10G-2.52L
SVGL-082.5D
V10G-2.52L
SVGL-102.5B
V10G-2.52L
– stocked
183
Introducing...
AN ALL NEW
KENNAMETAL.COM!
Here are Some Features of the
ALL NEW Kennametal.com:
On-line Buying
Direct web-order entry with price
and inventory information!
Contract Ordering
Direct web-order entry against
customer contracts with
tracking of product usage!
Check Order Status
Access to status of orders
placed including shipping
carrier information!
Check Account Status
Access to status of invoice and payment information!
Check Price and Availability
Access to price and inventory information on Kennametal standard products!
Favorites List
Ability to store a list of routinely purchased products from which you
can place orders quickly and easily!
Visit http://www.kennametal.com
today to register to take
advantage of our NEW
on-line features!
184
Boring Bars
page
Kendex Mini . . . . . . . . . . . . . . . . . . . . . .
186
Top Notch Threading and Grooving . . . . . . .
189
LT Threading . . . . . . . . . . . . . . . . . . . . . . . . . . . .
194
Micro Boring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
199
185
Kendex Mini Boring Bars
®
Steel Shank without Through-Coolant
S-CBF
S-KBF
See page 64 for additional insert geometry styles.
catalog number
right hand
left hand
l*
dg7
l1
f
l2
min. bore
BPGF0302..L..
BPGF0302..R..
3,5
3,5
6
6
60
60
3,25
3,25
16
16
6
6
E-1031
E-1031
FT-6
FT-6
BPGF0503..L..
BPGF0503..R..
BPGF0503..L..
BPGF0503..R..
BPGF0503..L..
BPGF0503..R..
5,0
5,0
5,0
5,0
5,0
5,0
6
6
8
8
10
10
60
60
80
80
100
100
4,5
4,5
5,5
5,5
6,5
6,5
16
16
20
20
24
24
8
8
10
10
12
12
E-1014
E-1014
E-1014
E-1014
E-1014
E-1014
FT-6
FT-6
FT-8
FT-8
FT-8
FT-8
metric
S06D-CBFPR 03
S06D-CBFPR 05
S08F-CBFPR 05
S10H-CBFPR 05
S06D-CBFPL 03
S06D-CBFPL 05
S08F-CBFPL 05
S10H-CBFPL 05
▫
inch
S04-KBFPR03
S04-KBFPR05
S05-KBFPR05
—
BPGF 03 02 02L .14
.250
2.375
.128
1.75
.250
CE-1031
FT-6
—
—
BPGF 05 03 02L .20
BPGF 05 03 02L .20
.250
.312
2.375
3.125
.177
.216
1.75
2.38
.315
.394
CE-1014
CE-1014
FT-8
FT-8
l2
min. bore
*Refer to insert page 64.
NOTE: Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
S-CBL
S-KBL
catalog number
right hand
left hand
l*
dg7
l1
f
BPGF0302..L..
3,5
3,5
6
6
60
60
3,25
3,25
16
16
6
6
E-1031
E-1031
FT-6
FT-6
BPGF0503..L..
5,0
5,0
5,0
5,0
5,0
5,0
6
6
8
8
10
10
60
60
80
80
100
100
4,5
4,5
5,5
5,5
6,5
6,5
16
16
20
20
24
24
8
8
10
10
12
12
E-1014
E-1014
E-1014
E-1014
E-1014
E-1014
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
BPGF 03 02 02L .14
.250
.250
2.375
2.375
.128
.128
1.75
1.75
.250
.250
CE-1031
CE-1031
FT-6
FT-6
BPGF 05 03 02L .20
.250
.250
.312
.312
2.375
2.375
3.125
3.125
.177
.177
.216
.216
1.75
1.75
2.38
2.38
.315
.315
.394
.394
CE-1014
CE-1014
CE-1014
CE-1014
FT-8
FT-8
FT-8
FT-8
metric
S06D-CBLPR 03
S06D-CBLPR 05
S08F-CBLPR 05
S10H-CBLPR 05
S06D-CBLPL 03
BPGF0302..R..
S06D-CBLPL 05
BPGF0503..R..
S08F-CBLPL 05
BPGF0503..R..
S10H-CBLPL 05
BPGF0503..R..
S04-KBLPL03
BPGF 03 02 02R .14
S04-KBLPL05
BPGF 05 03 02R .20
BPGF0503..L..
BPGF0503..L..
inch
S04-KBLPR03
S04-KBLPR05
S05-KBLPR05
S05-KBLPL05
BPGF 05 03 02L .20
BPGF 05 03 02R .20
– stocked
186
Carbide Shank with Through-Coolant
E-CBF
C-KBF
catalog number
right hand
left hand
l*
dg7
l1
f
l2
min. bore
a
BPGF0302.. L..
3,5
3,5
6
6
100
100
3,25
3,25
16
16
6
6
1
1
E-1031
E-1031
FT-6
FT-6
BPGF0503.. L..
5,0
5,0
5,0
5,0
5,0
5,0
6
6
8
8
10
10
100
100
125
125
150
150
4,5
4,5
5,5
5,5
6,5
6,5
16
16
20
20
24
24
8
8
10
10
12
12
1
1
2
2
2
2
E-1014
E-1014
E-1014
E-1014
E-1014
E-1014
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
metric
E06H-CBFPR 03
E06H-CBFPR 05
E08K-CBFPR 05
E10M-CBFPR 05
E06H-CBFPL 03
BPGF0302.. R..
E06H-CBFPL 05
BPGF0503.. R..
E08K-CBFPL 05
▫ BPGF0503.. R..
E10M-CBFPL 05
▫ BPGF0503.. R..
BPGF0503.. L..
BPGF0503.. L..
inch
C04-KBFPR03
C04-KBFPR05
C05-KBFPR05
—
BPGF 03 02 02 L .14
.250
3.938
.128
2.75
.250
.06
CE-1031
FT-6
—
—
BPGF 05 03 02 L .20
BPGF 05 03 02 L .20
.250
.312
3.938
4.922
.177
.216
3.31
4.12
.315
.394
.06
.08
CE-1014
CE-1014
FT-6
FT-8
– stocked
187
®
E-CBL
C-KBL
catalog number
right hand
left hand
l*
dg7
l1
f
l2
min. bore
a
BPGF0302..L..
BPGF0302..R..
3,5
3,5
6
6
100
100
3,25
3,25
16
16
6
6
1
1
E-1031
E-1031
FT-6
FT-6
BPGF0503..L..
BPGF0503..R..
BPGF0503..L..
BPGF0503..R..
BPGF0503..L..
BPGF0503..R..
5,0
5,0
5,0
5,0
5,0
5,0
6
6
8
8
10
10
100
100
125
125
150
150
4,5
4,5
5,5
5,5
6,5
6,5
16
16
20
20
24
24
8
8
10
10
12
12
1
1
2
2
2
2
E-1014
E-1014
E-1014
E-1014
E-1014
E-1014
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
BPGF 03 02 02 L .14
BPGF 03 02 02 R .14
.250
.250
3.938
3.938
.128
.128
2.75
2.75
.250
.250
.06
.06
CE-1031
CE-1031
FT-6
FT-6
BPGF 05 03 02 L
BPGF 05 03 02 R
BPGF 05 03 02 L
BPGF 05 03 02 R
.250
.250
.312
.312
3.938
3.938
4.922
4.922
.177
.177
.216
.216
3.31
3.31
4.12
4.12
.315
.315
.394
.394
.06
.06
.08
.08
CE-1014
CE-1014
CE-1014
CE-1014
FT-8
FT-8
FT-8
FT-8
metric
E06H-CBLPR 03
E06H-CBLPR 05
E08K-CBLPR 05
E10M-CBLPR 05
E06H-CBLPL 03
E06H-CBLPL 05
E08K-CBLPL 05
E10M-CBLPL 05
C04-KBLPL03
C04-KBLPL05
C05-KBLPL05
inch
C04-KBLPR03
C04-KBLPR05
C05-KBLPR05
.20
.20
.20
.20
– stocked
188
Top Notch Threading and Grooving Boring Bars
Identification System (Metric)
1.
Bar Style
steel
with coolant
3.
Tool
Length
9.
Insert Size
carbide
with coolant
heavy metal
with coolant
K
M
Q
R
S
T
U
125
150
180
200
7.
Insert
Position
5.
Insert
Shape
N
insert
number
0°
1
2
3
4
250
300
350
s
2.54
3.81
4.95
6.48
A 12 R N N T 0 R 2
2.
Bar Diameter
4.
Insert
Holding
Method
N — Top Notch
6.
Bar Style
T
8.
Hand of Bar
right hand
integers to be preceded
by a 0.
example: “d” = 8 mm
indicated by code 08
left hand
NOTE: Right-hand bars use left-hand inserts and clamps.
Left-hand bars use right-hand inserts and clamps.
189
Identification System (Inch)
1.
Bar Style
steel
with coolant
steel
carbide
with coolant
carbide
heavy metal
with coolant
interchangeable
head
3.
Insert Holding
Method
7.
Additional
Information
5.
Hand of Bar
right hand
N* — Top Notch
through-coolant
interchangeable head
left hand
S 32 – N E R 3 W
2.
Bar Diameter
4.
Insert Location
6.
Insert Size
end mount
undercut
a two-digit number which
indicates the bar diameter
in 1/16-inch increments
*Kennametal standard only.
NOTE: Right-hand bars use left-hand inserts and clamps.
Left-hand bars use right-hand inserts and clamps.
190
insert
number
1
2
3
4
5
6
8
s
.100
.150
.195
.255
.380
.383
.438
®
Steel Shank with Through-Coolant (Metric)
A..NNT
See pages 72-76 and 104-110 for additional insert geometry styles.
catalog number
right hand
left hand
A10KNNTOR1
A12MNNTOR1
A12MNNTOR2
A16MNNTOR2
*
dg7
—
—
l
f
min. bore
a
NG-1L
NG-1L
10
12
125
150
7
7
11,5
11,5
1/16-27 NPT
1/16-27 NPT
CM109
CM109
—
—
MS1034
MS1034
A12MNNTOL2
NG-2L
NG-2R
12
12
150
150
11
11
18,5
18,5
1/16-27 NPT
1/16-27 NPT
—
CM146
CM147
—
MS1025
MS1025
A16MNNTOL2
NG-2L
NG-2R
16
16
150
150
11
11
22,0
22,0
1/16-27 NPT
1/16-27 NPT
—
CM74
CM75
—
MS1025
MS1025
CM75
—
MS1025
MS1025
*Right-hand bars use left-hand inserts. Left-hand bars use right-hand inserts.
**Minimum bore capability varies with depth of groove. See page 702 for details on grooving and page 686 for details on threading in Catalog 1010.
NOTE: Refer to Catalog 1010 for a complete listing of OD toolholders, ID boring bars, and inserts.
Carbide Shank with Through-Coolant (Metric)
E..NNT
catalog number
right hand
left hand
E16RNNTOR2
E16RNNTOL2
*
NG-2L
NG-2R
dg7
l
f
min. bore
a
16
16
200
200
11
11
22,0
22,0
.19
.19
—
CM74
– stocked
191
®
Steel Shank with Through-Coolant (Inch)
A-NE
catalog number
right hand
left hand
A08-NER2
A10-NER2
*
dg7
l
f
min. bore
a
A08-NEL2
NG-2L
NG-2R
.500
.500
8
8
.437
.437
.730
.730
1/16-27 NPT
1/16-27 NPT
—
CM-146
CM-147
—
S-39
S-39
A10-NEL2
NG-2L
NG-2R
.625
.625
10
10
.500
.500
1.000
1.000
1/8-27 NPT
1/8-27 NPT
—
CM-74
CM-75
—
S-310
S-310
Carbide Shank with Through-Coolant (Inch)
E-NE
catalog number
right hand
left hand
E08-NER2
E10-NER2
*
dg7
l
f
min. bore
a
E08-NEL2
NG-2L
NG-2R
.500
.500
8
8
.437
.437
.730
.730
.19
.19
—
CM-146
CM-147
—
S-39
S-39
E10-NEL2
NG-2L
NG-2R
.625
.625
10
10
.500
.500
1.000
1.000
.22
.22
—
CM-74
CM-75
—
S-310
S-310
– stocked
192
Heavy Metal with Through-Coolant (Inch)
J-NE-S
catalog number
right hand
left hand
J05-NER1-S
J06-NER1-S
J08-NER1-S
*
dg7
l
f
min. bore
a†
—
NG-1L
.312
6
.258
.440
.09
CM-109
S-304
—
NG-1L
.375
6
.265
.480
.12
CM-109
S-304
—
NG-1L
.500
8
.325
.600
.160
CM-109
S-304
†Through hole only, no threads.
J-NE
catalog number
right hand
left hand
J08-NER2
J10-NER2
*
dg7
l
f
min. bore
a†
J08-NEL2
NG-2L
NG-2R
.500
.500
8
8
.437
.437
.730
.730
.16
.16
—
CM-146
CM-147
—
S-39
S-39
J10-NEL2
NG-2L
NG-2R
.625
.625
8
8
.500
.500
1.000
1.000
.16
.16
—
CM-74
CM-75
—
S-310
S-310
†Through hole only, no threads.
– stocked
193
LT Laydown Threading Bars
®
LT Boring Bar and Head Identification System (Inch)
1.
Bar Type
A steel with coolant
S
*5.
Insert Holding
Method
steel
7.
Hand of Bar
E
carbide with coolant
3.
Bar Diameter
insert screw
or
clamp
H interchangeable head
with coolant
indicates the bar diameter in
1/16-inch increments
left hand
right hand
S 08 12 – L S E R 2
2.
Necked-Shank
Bar Diameter
4.
Insert Style
L — laydown triangle
6.
Bar Style
8.
Insert Size
end cutting edge mount
indicates the necked-shank
diameter in 1/16-inch increments
*NOTE: Toolholders with shank sizes larger than 5/8-inch (16 mm) are supplied with clamp and insert screw.
Secure the insert with either the clamp or insert screw. Do not use both.
LT Threading – Shim Identification System
3. E — external
I — internal
1.
Shim
5.
Shim Angle
2P — 2° positive
1P — 1° positive
__ 0° neutral
1N — 1° negative
2N — 2° negative
3N — 3° negative
SM – Y E 3 – 2P
2.
Y — shim for
LT standard inserts
194
4.
IC — 1/8ths inch
insert
number
d
(inch)
l
(mm)
2
3
4
1/4
3/8
1/2
11
16
22
Size equals number of 1/8-inch
increments of d.
LT Laydown Threading Bars
LT Boring Bar and Head Identification System (Metric)
1.
Bar Type
A steel shank with internal
*5.
Insert Holding
Method
coolant supply
7.
Hand of Bar
E
carbide shank with internal
coolant supply
3.
Bar Diameter
insert screw
or
clamp
H replaceable boring head
left hand
right hand
A 10 20 – L S E R 11
2.
Necked-Shank
Bar Diameter
4.
Insert Style
L — laydown triangle
6.
Bar Style
8.
Insert Size
end cutting edge mount
indicates the bar diameter
in mm increments
l
d (IC)
11
16
22
6.35
9.52
12.70
*NOTE: Toolholders with shank sizes larger than 5/8-inch (16 mm) are supplied with clamp and insert screw.
Secure the insert with either the clamp or insert screw. Do not use both.
195
Laydown Threading Bars
®
LT Shims for Toolholders and Boring Bars
toolholder
insert
size
shim ordering code
ext.
int.
reverse helix - feed away from chuck
standard helix - feed towards chuck
feed direction
shim angle
RH
LT-16 (3/8")
LH
RH
LT-22 (1/2")
LH
LH
RH
LH
RH
4.5
SM-YE3-3P
SM-YI3-3P
SM-YE4-3P
SM-YI4-3P
3.5
SM-YE3-2P
SM-YI3-2P
SM-YE4-2P
SM-YI4-2P
2.5
SM-YE3-1P
SM-YI3-1P
SM-YE4-1P
SM-YI4-1P
1.5
SM-YE3
SM-YI3
SM-YE4
SM-YI4
0.5
SM-YE3-1N
SM-YI3-1N
SM-YE4-1N
SM-YI4-1N
0
SM-YE3-1.5N
SM-YI3-1.5N
SM-YE4-1.5N
SM-YI4-1.5N
-0.5
SM-YE3-2N
SM-YI3-2N
SM-YE4-2N
SM-YI4-2N
-1.5
SM-YE3-3N
SM-YI3-3N
SM-YE4-3N
SM-YI4-3N
NOTE: For complete guidelines on shim selection, see pages 692-693 of Lathe Catalog 1010.
Slanted Shim Kit
shim size (IC)
ordering code
3/8"
ABY3
1/2"
ABY4
contains slanted shims
Remember, proper shim
selection is important!
SM-YE3-2P,1P,1N,2N,3N
SM-YI3-2P,1P,1N,2N,3N
SM-YE4-2P,1P,1N,2N,3N
SM-YI4-2P,1P,1N,2N,3N
Always verify the supplied shim
is correct for the thread to be cut.
Since you might occasionally need different shims other than those
supplied with our standard toolholders, we strongly recommend that
shim kits be readily available in every tool shop.
Steel Shank with Through-Coolant (Metric)
A-LSE
See pages 84-96 for additional insert geometry styles.
catalog number
right hand
left hand
A1010LSER11
—
A1020LSER11
—
A1320LSER11
—
A1320LSER16
—
A1616LSER16
—
A1620LSER16
—
A2020LSER16
—
—
A1010LSEL11
—
A1020LSEL11
—
A1320LSEL11
—
A1320LSEL16
—
A1616LSEL16
—
A1620LSEL16
—
A2020LSEL16
▫
dg7
l1
LT-11NR
LT-11NL
LT-11NR
LT-11NL
LT-11NR
LT-11NL
10
10
20
20
20
20
100
100
180
180
180
180
LT-16NR
LT-16NL
LT-16NR
LT-16NL
LT-16NR
LT-16NL
LT-16NR
LT-16NL
20
20
16
16
20
20
20
20
180
180
150
150
180
180
180
180
min.
bore
a
7,3 100 10,0
7,3 100 10,0
7,3 25 10,0
7,3 25 10,0
8,9 32 13,0
8,9 32 13,0
13
13
13
13
16
16
4,5
4,5
4,5
4,5
4,5
4,5
S-SN2T
S-SN2T
S-SN2T
S-SN2T
S-SN2T
S-SN2T
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
FT-6
FT-6
FT-6
FT-6
FT-6
FT-6
10,3
10,3
11,3
11,3
11,5
11,5
13,4
13,4
20
20
20
20
20
20
24
24
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
S-SA3T
S-SA3T
S-SA3T
S-SA3T
S-SA3T
S-SA3T
S-SA3T
S-SA3T
—
—
—
—
—
—
SMYI3
—
—
—
—
—
—
—
—
SMYE3
—
—
—
—
—
—
SSY3T
SSY3T
—
—
—
—
—
—
CKC3
CKC3
FT-10
FT-10
FT-10
FT-10
FT-10
FT-10
FT-10-15
FT-10-15
f
l3
32
32
32
32
40
40
40
40
d1
13,0
13,0
16,0
16,0
16,0
16,0
20,0
20,0
– stocked
196
Laydown Threading Bars
Steel Shank without Through-Coolant (Inch)
S-LSE
catalog number
right hand
left hand
S0612-LSER2
—
S0812-LSER2
—
S1012-LSER3
—
S1212-LSER3
—
—
S0612-LSEL2
—
S0812-LSEL2
—
S1012-LSEL3
—
S1212-LSEL3
d1
min.
bore
3/8
3/8
1/2
1/2
.50
.50
.65
.65
S-SN2T
S-SN2T
S-SN2T
S-SN2T
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
FT-8
FT-8
FT-8
FT-8
.46 1 1/2 5/8
.46 1 1/2 5/8
.51 —
—
.51 —
—
.80
.80
.90
.90
S-SA3T
S-SA3T
S-SA3T
S-SA3T
—
—
SM-YI3
—
—
—
SM-YE3
—
—
S-SY3T
S-SY3T
—
—
CK-C3
CK-C3
FT-10
FT-10
FT-10-15
FT-10-15
dg7
l1
f
l3
LT-11NR
LT-11NL
LT-11NR
LT-11NL
3/4
3/4
3/4
3/4
7
7
7
7
.28
1
.28
1
.34 1 1/4
.34 1 1/4
LT-16NR
LT-16NL
LT-16NR
LT-16NL
3/4
3/4
3/4
3/4
7
7
7
7
– stocked
E-LSE
catalog number
right hand
left hand
dg7
l
LT-16NR
LT-16NL
16
16
—
—
LT-11NR
LT-11NL
LT-11NR
LT-11NL
3/8
3/8
1/2
1/2
6
6
8
8
LT-16NR
LT-16NL
5/8
5/8
10
10
f
min.
bore
a
metric
—
E16R-LSEL16
E06-LSER2
—
E08-LSER2
—
—
E06-LSEL2
—
E08-LSEL2
E10-LSER3
—
E16R-LSER16
—
▫
11,5 200
11,5 200
2,5
2,5
S-SA3T
S-SA3T
—
—
—
—
—
—
—
—
FT-10
FT-10
.500 1/8
.500 1/8
.650 3/16
.650 3/16
S-SN2T
S-SN2T
S-SN2T
S-SN2T
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
FT-8
FT-8
FT-8
FT-8
.460 .800 7/32
.460 .800 7/32
S-SA3T
S-SA3T
—
—
—
—
—
—
—
—
FT-10
FT-10
inch
—
E10-LSEL3
.280
.280
.340
.340
– stocked
197
Kennametal Micro
Boring Bars
198
Micro Boring Bars
Boring Bars (Inch)
Steel Shank Bars
A-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80° Diamond Screw-On Inserts . . . . . . . . . . . . . .
45° Diamond Screw-On Inserts . . . . . . . . . . . . . . .
Triangle Screw-On Inserts . . . . . . . . . . . . . . . . . . . .
Offset Shank Bars with Triangle Screw-On Inserts
Trigon Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . .
Threading and Grooving Screw-On Inserts . . . . . . . .
Coolant Capable Steel Shank Bars
Triangle Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . .
Carbide Shank Bars
80° Diamond Screw-On Inserts. . . . . . . . . . . . . . . . . . . . .
45° Diamond Screw-On Inserts . . . . . . . . . . . . . . . . . . . . .
Triangle Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . .
Trigon Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . .
Threading and Grooving Screw-On Inserts . . . . . . . . . . . .
Coolant Capable Carbide Shank Bars
80° Diamond Screw-On Inserts . . . . . . . . . . . . . . . . . . . . . .
Triangle Screw-On Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . .
Kits
page
200
200
201-202
203
204-205
206
207
207
208
209-210
211
212-213
214
214
215
216
.........................................
217
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
217
199
Inch Boring Bars with Coolant Capable Steel Shank
®
A-Series
ATBI
catalog number
ATBI-375-1.5
ATBI-500-1.5
ATBI-500-4
ATBI-625-4
ATBI-750-4
▫
Dmin
d1
d2
l1
l2
f
See
insert
section,
pages
132-133.
.375
.500
.500
.625
.750
.760
.760
.760
.760
.760
1.500
1.500
4.000
4.000
4.000
see
insert
section
see
insert
section
l2
f
AW-250
AW-250
AW-250
AW-250
AW-250
AS-8-32
AS-8-32
AS-8-32
AS-8-32
AS-8-32
BW-078
BW-078
BW-078
BW-078
BW-078
BW-312
BW-312
BS-8-32
BS-8-32
BW-078
BW-078
Inch Boring Bars with Steel Shank
B-Series
BSBI
catalog number
BSBI-750-6
BSBI-1000-6
– stocked
200
Dmin
d1
d2
l1
See insert
section,
page 133.
.750
1.000
1.010
1.010
6.000
6.000
see insert see insert
section
section
Necked Shank Bars — 80° Diamond Screw-On Inserts
S-SCF – 90° Lead
See page 134
geometry styles.
catalog number
right hand
S3.206X-SCFDR1.2-0.5
S3.206X-SCFDR1.2-1
S0406X-SCFDR1.2-0.75
S0406X-SCFDR1.2-1.25
S3.208X-SCFDR1.2-0.5
S3.208X-SCFDR1.2-1
S0408X-SCFDR1.2-0.75
S0408X-SCFDR1.2-1.25
Dmin
d1
d2
l1
l2
f
CDHB 1.20.60.5
CDHB 1.20.60.5
.239
.239
.375
.375
.203
.203
2.500
2.500
.500
1.000
.122
.122
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.292
.292
.375
.375
.260
.260
2.500
2.500
.750
1.250
.152
.152
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.239
.239
.500
.500
.203
.203
2.750
2.750
.500
1.000
.122
.122
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.292
.292
.500
.500
.260
.260
2.750
2.750
.750
1.250
.152
.152
CC-11
CC-11
FT-6
FT-6
left hand
S3.206X-SCFDL1.2-0.5
S3.206X-SCFDL1.2-1
S0406X-SCFDL1.2-0.75
S0406X-SCFDL1.21.25
S3.208X-SCFDL1.2-0.5
S3.208X-SCFDL1.2-1
S0408X-SCFDL1.2-0.75
S0408X-SCFDL1.2-1.25
Straight Shank Bars
See page 134
geometry styles.
catalog number
right hand
S03X-SCFDR1.2
S04F-SCFDR1.2
left hand
Dmin
dg7
d2
l1
f
—
CDHB 1.20.60.5
.244
.187
.203
2.500
.122
CC-09
FT-6
—
CDHB 1.20.60.5
.292
.250
.260
3.000
.152
CC-11
FT-6
– stocked
201
®
Necked Shank Bars — 80° Diamond Screw-On Inserts
S-SCL – 95° Lead
See page 134
geometry styles.
catalog number
right hand
S2.906X-SCLDR1.2-0.5
S2.906X-SCLDR1.2-1
S3.206X-SCLDR1.2-0.5
S3.206X-SCLDR1.2-1
S0406X-SCLDR1.2-0.75
S0406X-SCLDR1.2-1.25
S2.908X-SCLDR1.2-0.5
S2.908X-SCLDR1.2-1
S3.208X-SCLDR1.2-0.5
S3.208X-SCLDR1.2-1
S0408X-SCLDR1.2-0.75
S0408X-SCLDR1.2-1.25
Dmin
d1
d2
l1
l2
f
CDHB 1.20.60.5
CDHB 1.20.60.5
.208
.208
.375
.375
.180
.180
2.500
2.500
.500
1.000
.104
.104
CC-09
CC-09
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.230
.230
.375
.375
.203
.203
2.500
2.500
.500
1.000
.116
.116
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.285
.285
.375
.375
.260
.260
2.500
2.500
.750
1.250
.145
.145
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.208
.208
.500
.500
.180
.180
2.750
2.750
.500
1.000
.104
.104
CC-09
CC-09
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.230
.230
.500
.500
.203
.203
2.750
2.750
.500
1.000
.116
.116
CC-11
CC-11
FT-6
FT-6
CDHB 1.20.60.5
CDHB 1.20.60.5
.285
.285
.500
.500
.260
.260
2.750
2.750
.750
1.250
.145
.145
CC-11
CC-11
FT-6
FT-6
left hand
S2.906X-SCLDL1.2-0.5
S2.906X-SCLDL1.2-1
S3.206X-SCLDL1.2-0.5
S3.206X-SCLDL1.2-1
S0406X-SCLDL1.2-0.75
S0406X-SCLDL1.2-1.25
S2.908X-SCLDL1.2-0.5
S2.908X-SCLDL1.2-1
S3.208X-SCLDL1.2-0.5
S3.208X-SCLDL1.2-1
S0408X-SCLDL1.2-0.75
S0408X-SCLDL1.2-1.25
Straight Shank Bars
*
See page 134
geometry styles.
catalog number
right hand
S03X-SC7DR1.2*
S03X-SCLDR1.2A
S03X-SCLDR1.2
S04F-SCLDR1.2
*97° on these bars
– stocked
202
Dmin
d1
d2
l1
f
CDHB 1.20.60.5
CDHB 1.20.60.5
CDHB 1.20.60.5
.180
.208
.230
.187
.187
.187
.165
.180
.203
2.500
2.500
2.500
.094
.104
.116
CC-09
CC-09
CC-09
FT-6
FT-6
FT-6
CDHB 1.20.60.5
.285
.250
.260
3.000
.145
CC-11
FT-6
left hand
S03X-SC7DL1.2*
S03X-SCLDL1.2A
S03X-SCLDL1.2
S04F-SCLDL1.2
▫
Inch Profiling Boring Bars with Steel Shank
45° Diamond Screw-On Inserts
S-SGR – 95° Lead
See page 136
geometry styles.
catalog number
right hand
S0408H-SGRPR5-1
S0508H-SGRPR5-1.25
Dmin
d1
d2
l1
l2
f
GPCD-50.5
.400
.500
.260
4.000
1.000
.260
CT-15
FT-6
GPCD-50.5
.463
.500
.323
4.000
1.250
.291
CT-15
FT-6
Dmin
d1
d2
l1
l2
f
left hand
S0408H-SGRPL5-1
S0508H-SGRPL5-1.25
S-SG – 67° 30' Lead
See page 136
geometry styles.
catalog number
right hand
left hand
GPCD-50.5
.400
.500
.260
4.000
1.000
.260
CT-15
FT-6
S0508H-SG22.5PR5-1.25 S0508H-SG22.5PL5-1.25 GPCD-50.5
.463
.500
.323
4.000
1.250
.291
CT-15
FT-6
S0408H-SG22.5PR5-1
S0408H-SG22.5PL5-1
– stocked
203
®
Necked Shank Bars — Triangle Screw-On Inserts
S-STF – 90° Lead
See pages 136-138
geometry styles.
catalog number
right hand
S3.208F-STFDR1.28-0.5
S3.208F-STFDR1.28-1
S0408F-STFDR1.28-0.75
S0408F-STFDR1.28-1.25
S0508F-STFDR1.28-1
S0508F-STFDR1.28-1.5
S3.210H-STFDR1.28-0.5
S3.210H-STFDR1.28-1
S0410H-STFDR1.28-0.75
S0410H-STFDR1.28-1.25
S0510H-STFDR1.28-1
S0510H-STFDR1.28-1.5
S0608X-STFDR2-1.12
S0608X-STFDR2-1.88
S0610X-STFDR2-1.12
S0610X-STFDR2-1.88
S0810X-STFDR2-1.5
S0810X-STFDR2-2.5
S0612H-STFDR2-1.5
S1012J-STFDR2-2.5
left hand
S3.208F-STFDL1.28-0.5
S3.208F-STFDL1.28-1
S0408F-STFDL1.28-0.75
S0408F-STFDL1.28-1.25
S0508F-STFDL1.28-1
S0508F-STFDL1.28-1.5
S3.210H-STFDL1.28-0.5
S3.210H-STFDL1.28-1
S0410H-STFDL1.28-0.75
S0410H-STFDL1.28-1.25
S0510H-STFDL1.28-1
S0510H-STFDR1.28-1.5
S0608X-STFDL2-1.12
S0608X-STFDL2-1.88
S0610X-STFDL2-1.12
S0610X-STFDL2-1.88
S0810X-STFDL2-1.5
S0810X-STFDL2-2.5
S0612H-STFDL2-1.5
S1012J-STFDL2-2.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
Dmin
d1
d2
l1
l2
f
.275
.275
.300
.300
.360
.360
.275
.275
.300
.300
.360
.360
.438
.438
.438
.438
.563
.563
.438
.688
.500
.500
.500
.500
.500
.500
.625
.625
.625
.625
.625
.625
.500
.500
.625
.625
.625
.625
.750
.750
.203
.203
.259
.259
.321
.321
.203
.203
.259
.259
.321
.321
.390
.390
.390
.390
.510
.510
.390
.625
3.000
3.000
3.000
3.000
3.000
3.000
4.000
4.000
4.000
4.000
4.000
4.000
3.750
3.750
4.250
4.250
4.250
4.250
4.000
4.500
.500
1.000
.750
1.250
1.000
1.500
.500
1.000
.750
1.250
1.000
1.500
1.125
1.875
1.125
1.875
1.500
2.500
1.500
2.500
.134
.134
.156
.156
.187
.187
.134
.134
.156
.156
.187
.187
.221
.221
.221
.221
.296
.296
.221
.353
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
QC-21
QC-21
QC-21
QC-21
QC-26
QC-26
QC-21
QC-26
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
FT-9
FT-9
FT-9
FT-9
FT-9
FT-9
FT-9
FT-9
Straight Shank Bars
See pages 136-138
geometry styles.
catalog number
right hand
S03G-STFDR1.28
S04H-STFDR1.28
S05H-STFDR1.28
S06K-STFDR2
S08M-STFDR2
S10Q-STFDR6P
S12R-STFDR6P
– stocked
204
Dmin
d1
d2
l1
f
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
.275
.300
.360
.187
.250
.312
.197
.260
.322
3.500
4.000
4.000
.123
.156
.187
FC-11
FC-14
FC-14
FT-7
FT-7
FT-7
TPCB-220.5
TPCB-220.5
.438
.563
.375
.500
.385
.510
5.000
6.000
.221
.296
QC-21
QC-26
FT-9
FT-9
TD-6P0.5
TD-6P0.5
.731
.855
.625
.750
.635
.760
7.000
8.000
.393
.460
SC-30
SC-30
FT-9
FT-9
left hand
▫
S03G-STFDL1.28
S04H-STFDL1.28
S05H-STFDL1.28
S06K-STFDL2
S08M-STFDL2
S10Q-STFDL6P
S12R-STFDL6P
▫
▫
Necked Shank Bars — Triangle Screw-On Inserts
S-STL – 95° Lead
See pages 136-138
geometry styles.
catalog number
right hand
S3.208F-STLDR1.28-0.5
S3.208F-STLDR1.28-1
S0408F-STLDR1.28-0.75
S0408F-STLDR1.28-1.25
S0508F-STLDR1.28-1
S0508F-STLDR1.28-1.5
S3.210H-STLDR1.28-0.5
S3.210H-STLDR1.28-1
S0410H-STLDR1.28-0.75
S0410H-STLDR1.28-1.25
S0510H-STLDR1.28-1
S0510H-STLDR1.28-1.5
S0608X-STLDR2-1.12
S0608X-STLDR2-1.88
S0610X-STLDR2-1.12
S0610X-STLDR2-1.88
S0810X-STLDR2-1.5
S0810X-STLDR2-2.5
S0612H-STLDR2-1.5
S1012J-STLDR2-2.5
Dmin
d1
d2
l1
l2
f
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
.275
.275
.300
.300
.360
.360
.500
.500
.500
.500
.500
.500
.203
.203
.259
.259
.321
.321
3.000
3.000
3.000
3.000
3.000
3.000
.500
1.000
.750
1.250
1.000
1.500
.126
.126
.156
.156
.187
.187
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
TDHB 1.280.750.5
.275
.275
.300
.300
.360
.360
.625
.625
.625
.625
.625
.625
.203
.203
.259
.259
.321
.321
4.000
4.000
4.000
4.000
4.000
4.000
.500
1.000
.750
1.250
1.000
1.500
.126
.126
.156
.156
.187
.187
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
TPCB-220.5
TPCB-220.5
.438
.438
.500
.500
.390
.390
3.750
3.750
1.125
1.875
.221
.221
QC-21
QC-21
FT-9
FT-9
TPCB-220.5
TPCB-220.5
TPCB-220.5
TPCB-220.5
.438
.438
.563
.563
.625
.625
.625
.625
.390
.390
.510
.510
4.250
4.250
4.250
4.250
1.125
1.875
1.500
2.500
.221
.221
.296
.296
QC-21
QC-21
QC-26
QC-26
FT-9
FT-9
FT-9
FT-9
TPCB-220.5
TPCB-220.5
.438
.688
.750
.750
.390
.625
4.000
4.500
1.500
2.500
.221
.353
QC-21
QC-26
FT-9
FT-9
left hand
S3.208F-STLDL1.28-0.5
S3.208F-STLDL1.28-1
S0408F-STLDL1.28-0.75
S0408F-STLDL1.28-1.25
S0508F-STLDL1.28-1
S0508F-STLDL1.28-1.5
S3.210H-STLDL1.28-0.5
S3.210H-STLDL1.28-1
S0410H-STLDL1.28-0.75
S0410H-STLDL1.28-1.25
S0510H-STLDL1.28-1
S0510H-STLDL1.28-1.5
S0608XX-STLDL2-1.12
S0608X-STLDL2-1.88
S0610X-STLDL2-1.12
S0610X-STLDL2-1.88
S0810X-STLDL2-1.5
S0810X-STLDL2-2.5
S0612H-STLDL2-1.5
S1012J-STLDL2-2.5
Straight Shank Bars
See pages 136-138
geometry styles.
catalog number
right hand
S03G-STLDR1.28
S04H-STLDR1.28
S05H-STLDR1.28
S06K-STLDR2
S08M-STLDR2
S10Q-STLDR6P
S12R-STLDR6P
left hand
S03G-STLDL1.28
S04H-STLDL1.28
S05H-STLDL1.28
S06K-STLDL2
S08M-STLDL2
S10Q-STLDL6P
S12R-STLDL6P
▫ TDHB 1.280.750.5
▫ TDHB 1.280.750.5
▫ TDHB 1.280.750.5
TPCB-220.5
TPCB-220.5
TD-6P0.5
TD-6P0.5
Dmin
d1
d2
l1
f
.275
.300
.360
.187
.250
.312
.197
.260
.322
3.500
4.000
4.000
.123
.156
.187
FC-11
FC-14
FC-14
FT-7
FT-7
FT-7
.438
.563
.375
.500
.385
.510
5.000
6.000
.221
.296
QC-21
QC-26
FT-9
FT-9
.731
.855
.625
.750
.635
.760
7.000
8.000
.393
.460
SC-30
SC-30
FT-10
FT-10
– stocked
205
Inch Boring Bars with Offset Steel Shanks
®
Triangle Screw-On Inserts
S-STF-E – 90° Lead
See pages 136-138
geometry styles.
catalog number
right hand
Dmin
left hand
d1
d2
l1
l2
f
h
w
—
TPCB-220.5
.727
.750
.375
3.750
1.500
.024
.399
.423
QC-26
FT-9
S0816X-STFDR6P-1.5E S0816X-STFDR6P-2.5E —
—
TD-6P0.5
TD-6P0.5
.969
.969
1.000
1.000
.500
.500
3.750
4.750
1.500
2.500
.070
.070
.569
.569
.639
.639
SC-38
SC-38
FT-10
FT-10
Dmin
d1
d2
l1
l2
f
h
w
S0612X-STFDR2-1.5E
S-STL-E – 95° Lead
See pages 136-138
geometry styles.
catalog number
right hand
left hand
—
TPCB-220.5
.727
.750
.375
3.750
1.500
.024
.399
.423
QC-26
FT-9
S0816X-STLDR6P-1.5E S0816X-STLDR6P-2.5E —
—
TD-6P0.5
TD-6P0.5
.969
.969
1.000
1.000
.500
.500
3.750
4.750
1.500
2.500
.070
.070
.569
.569
.639
.639
SC-38
SC-38
FT-10
FT-10
S0612X-STLDR2-1.5E
– stocked
206
Trigon Inserts
S-SWU – 93° Lead
See page 138
geometry styles.
catalog number
right hand
S03H-SWUDR1.5
S04H-SWUDR1.5
S05H-SWUDR1.5
S06K-SWUDR2
S08M-SWUDR2
Dmin
d1
d2
l1
f
WPGT-1.510.5
WPGT-1.510.5
WPGT-1.510.5
.260
.285
.347
.187
.250
.312
.225
.260
.322
4.000
4.000
4.000
.126
.143
.174
MS-1438
MS-1438
MS-1438
FT-5
FT-5
FT-5
WPGT-21.50.5
WPGT-21.50.5
.415
.540
.187
.250
.385
.510
5.000
6.000
.211
.273
MS-1153
MS-1153
FT-7
FT-7
left hand
S03H-SWUDL1.5
S04H-SWUDL1.5
S05H-SWUDL1.5
S06K-SWUDL2
S08M-SWUDL2
Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.
Inch Threading and Grooving Bars with Steel Shank
Screw-On Inserts
S-CSE
See page 135
geometry styles.
catalog number
right hand
S03X-CSER1.2
S04F-CSER1.2
S06H-CSER2
—
S08K-CSER2
—
S10M-CSER2
—
Dmin
d1
d2
l1
f
CPG-1.2-030-2R
CPG-1.2-030-2R
.272
.312
.187
.250
.219
.260
2.500
3.000
.154
.175
CC-11
CC-11
FT-6
FT-6
CPG-2-030-2R
CPG-2-030-2L
CPG-2-030-2R
CPG-2-030-2L
CPG-2-030-2R
CPG-2-030-2L
.481
.481
.605
.605
.731
.731
.375
.375
.500
.500
.625
.625
.385
.385
.510
.510
.635
.635
4.000
4.000
5.000
5.000
6.000
6.000
.278
.278
.340
.340
.404
.404
QC-15
QC-15
QC-15
QC-15
QC-15
QC-15
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
left hand
—
—
—
S06H-CSEL2
—
S08K-CSEL2
—
S10M-CSEL2
* Dimensions shown are taken over the nose radius of grooving insert style CPG.
These bars are also designed to be used with threading style inserts CPT, see insert section for details.
– stocked
207
Inch Boring Bars with Coolant Capable Steel Shank
®
Triangle Screw-On
A-STF – 90° Lead
See pages 136-138
geometry styles.
catalog number
right hand
A08M-STFDR2
A10Q-STFDR6P
A12R-STFDR6P
Dmin
left hand
d1
d2
l1
f
—
TPCB-220.5
.563
.500
.510
6.000
.296
QC-26
FT-9
—
—
TD-6P0.5
TD-6P0.5
.731
.855
.625
.750
.635
.760
7.000
8.000
.393
.460
SC-30
SC-38
FT-10
FT-10
Dmin
d1
d2
l1
f
A-STL – 95° Lead
See pages 136-138
geometry styles.
catalog number
right hand
A06K-STLDR2
A08M-STLDR2
A10Q-STLDR6P
A12R-STLDR6P
– stocked
208
left hand
—
—
TPCB- 220.5
TPCB- 220.5
.438
.563
.375
.500
.385
.510
5.000
6.000
.221
.296
QC-21
QC-26
FT-9
FT-9
—
—
TP-6P0.5
TP-6P0.5
.731
.855
.625
.750
.635
.760
7.000
8.000
.393
.460
SC-30
SC-38
FT-10
FT-10
Inch Boring Bars
Carbide Bar and Steel Shank — 80° Diamond Insert
C-SCF – 90° Lead
See page 134
geometry styles.
catalog number
right hand
Dmin
d1
d2
l1
l2
f
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
.244
.244
.292
.292
.625
.625
.625
.625
.210
.210
.258
.258
4
5
4
5.25
1
2
1.25
2.5
.125
.125
.152
.152
CC-11
CC-11
CC-11
CC-11
FT-6
FT-6
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
.244
.244
.292
.292
.500
.500
.500
.500
.210
.210
.258
.258
2.5
3.5
2.75
4
1
2
1.25
2.5
.125
.125
.152
.152
CC-11
CC-11
CC-11
CC-11
FT-6
FT-6
FT-6
FT-6
left hand
C3.210H-SCFDL1.2-1 C3.210K-SCFDL1.2-2 —
—
C3.208X-SCFDR1.2-1
—
C3.208G-SCFDR1.2-2
—
C0408X-SCFDR1.2-1.25 C0408X-SCFDL1.2-1.25 C0408H-SCFDR1.2-2.5 —
C3.210H-SCFDR1.2-1
C3.210K-SCFDR1.2-2
C0410H-SCFDR1.2-1.25
C0410X-SCFDR1.2-2.5
Carbide Shank Bars
See page 134
geometry styles.
catalog number
right hand
C03H-SCFDR1.2
C04H-SCFDR1.2
C04M-SCFDR1.2
C05M-SCFDR1.2
Dmin
d1
d2
l1
f
CDHB-1.20.60.5
CDHB-1.20.60.5
.231
.292
.187
.250
.193
.258
4.000
4.000
.117
.152
CC-11
CC-11
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
.292
.356
.250
.312
.258
.322
6.000
6.000
.152
.185
CC-11
CC-11
FT-6
FT-6
left hand
C03H-SCFDL1.2
C04H-SCFDL1.2
C04M-SCFDL1.2
C05M-SCFDL1.2
– stocked
209
Inch Boring Bars
®
Carbide Bar with Steel Shank — 80° Diamond Inserts
C-SCL – 95° Lead
See page 134
geometry styles.
catalog number
right hand
Dmin
d1
d2
l1
l2
f
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
.208
.208
.230
.230
.285
.285
.625
.625
.625
.625
.625
.625
.189
.189
.210
.210
.258
.258
3.875
4.875
4
5
4
5.25
0.875
1.875
1
2
1.25
2.5
.104
.104
.119
.119
.145
.145
CC-9
CC-9
CC-11
CC-11
CC-11
CC-11
FT-6
FT-6
FT-6
FT-6
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
.208
.208
.230
.230
.285
.285
.500
.500
.500
.500
.500
.500
.189
.189
.210
.210
.258
.258
2.375
3.375
2.5
3.5
2.75
4
0.875
1.875
1
2
1.25
2.5
.104
.104
.119
.119
.145
.145
CC-9
CC-9
CC-11
CC-11
CC-11
CC-11
FT-6
FT-6
FT-6
FT-6
FT-6
FT-6
left hand
C2.908X-SCLDR1.2-0.88 C2.908X-SCLDR1.2-1.88 C3.208X-SCLDR1.2-1
C3.208G-SCLDR1.2-2
C0408X-SCLDR1.2-1.25 C0408H-SCLDR1.2-2.5 C2.910X-SCLDR1.2-0.88
C2.910X-SCLDR1.2-1.88
C3.210H-SCLDR1.2-1
C3.210K-SCLDR1.2-2
C0410H-SCLDR1.2-1.25
C0410X-SCLDR1.2-2.5
C2.908X-SCLDL1.2-0.88 —
C3.208X-SCLDL1.2-1
—
C0408X-SCLDL1.2-1.25 C0408H-SCLDL1.2-2.5 C2.910X-SCLDL1.2-0.88
C2.910X-SCLDL1.2-1.88
C3.210H-SCLDL1.2-1
C3.210K-SCLDL1.2-2
C0410H-SCLDL1.2-1.25
C0410X-SCLDL1.2-2.5
Carbide Shank Bars
See page 134
geometry styles.
catalog number
right hand
C03H-SCLDR1.2
C03M-SCLDR1.2
C04H-SCLDR1.2
C04M-SCLDR1.2
C05M-SCLDR1.2
– stocked
210
Dmin
d1
d2
l1
f
CDHB-1.20.60.5
CDHB-1.20.60.5
.222
.222
.187
.187
.193
.193
4.000
6.000
.111
.111
CC-11
CC-11
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
.285
.285
.250
.250
.258
.258
4.000
6.000
.145
.145
CC-11
CC-11
FT-6
FT-6
CDHB-1.20.60.5
.356
.312
.322
6.000
.185
CC-11
FT-6
left hand
C03H-SCLDL1.2
C03M-SCLDL1.2
C04H-SCLDL1.2
C04M-SCLDL1.2
C05M-SCLDL1.2
Inch Profiling Boring Bars with Carbide Shank
45° Diamond Inserts
C-SG – 95° Lead
See page 136
geometry styles.
catalog number
right hand
C04M-SGLPR5
C05M-SGLPR5
Dmin
d1
d2
l1
f
GPCD-50.5
.400
.250
.260
6.000
.260
CT-15
FT-6
GPCD-50.5
.463
.312
.322
6.000
.291
CT-15
FT-6
Dmin
d1
d2
l1
f
GPCD-50.5
.400
.250
.260
6.000
.260
CT-15
FT-6
GPCD-50.5
.463
.312
.322
6.000
.291
CT-15
FT-6
left hand
C04M-SGLPL5
C05M-SGLPL5
C-SG – 67° 30' Lead
See page 136
geometry styles.
catalog number
right hand
C04M-SG22.5PR5
C05M-SG22.5PR5
left hand
C04M-SG22.5PL5
C05M-SG22.5PL5
– stocked
211
Inch Boring Bars
®
Carbide Bar with Steel Shank — Triangle Inserts
C-STF – 90° Lead
See pages 136-138
geometry styles.
catalog number
right hand
C3.208X-STFDR1.28-1
C3.208G-STFDR1.28-2
C0408X-STFDR1.28-1.25
C0408H-STFDR1.28-2.5
C0508F-STFDR1.28-1.5
C0508X-STFDR1.28-3.12
C0310H-STFDR1.28-1
C0310K-STFDR1.28-2
C0410H-STFDR1.28-1.25
C0410X-STFDR1.28-2.5
C0510H-STFDR1.28-1.5
C0510X-STFDR1.28-3.12
left hand
Dmin
d1
d2
l1
l2
f
—
—
—
—
—
—
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
.275
.275
.300
.300
.360
.360
.500
.500
.500
.500
.500
.500
.207
.207
.260
.260
.322
.322
2.500
3.500
2.750
4.000
3.000
4.625
1.000
2.000
1.250
2.500
1.500
3.125
.134
.134
.156
.156
.187
.187
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
—
—
—
—
—
—
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
TDHB-1.280.750.5
.275
.275
.300
.300
.360
.360
.625
.625
.625
.625
.625
.625
.207
.207
.260
.260
.322
.322
4.000
5.000
4.000
5.250
4.000
5.625
1.000
2.000
1.250
2.500
1.500
3.125
.134
.134
.156
.156
.187
.187
FC-11
FC-11
FC-14
FC-14
FC-14
FC-14
FT-7
FT-7
FT-7
FT-7
FT-7
FT-7
Carbide Shank Bars
See pages 136-138
geometry styles.
catalog number
right hand
C04M-STFDR1.28
C05M-STFDR1.28
C06S-STFDR2
C08S-STFDR2
C10M-STFPR6P
C12S-STFPR6P
– stocked
212
left hand
C04M-STFDL1.28
C05M-STFDL1.28
C06S-STFDL2
C08S-STFDL2
C10M-STFPL6P
C12S-STFPL6P
TDHB-1.280.750.5
TDHB-1.280.750.5
TPCB-220.5
TPCB-220.5
TD-6P0.5
TD-6P0.5
Dmin
d1
d2
l1
f
.300
.360
.250
.312
.260
.322
6.000
6.000
.156
.187
FC-14
FC-14
FT-7
FT-7
.438
.563
.375
.500
.390
.510
10.000
10.000
.221
.296
QC-21
QC-26
FT-9
FT-9
.731
.855
.625
.750
.635
.760
6.000
10.000
.393
.460
SC-30
SC-30
FT-10
FT-10
Inch Boring Bars
Carbide Bar with Steel Shank — Triangle Inserts
C-STL – 95° Lead
See pages 136-138
geometry styles.
catalog number
right hand
C3.208X-STLDR1.28-1
C3.208G-STLDR1.28-2
C0408X-STLDR1.28-1.25
C0408H-STLDR1.28-2.5
C0508F-STLDR1.28-1.5
C0508X-STLDR1.28-3.12
C0310H-STLDR1.28-1
C0310K-STLDR1.28-2
C0410H-STLDR1.28-1.25
C0410X-STLDR1.28-2.5
C0510H-STLDR1.28-1.5
C0510X-STLDR1.28-3.12
Dmin
d1
d2
l1
l2
f
TDHB-1.280.750.5
.275
.275
.500
.500
.207
.207
2.500
3.500
1.000
2.000
.126
.126
FC-11
FC-11
FT-7
FT-7
TDHB-1.280.750.5
TDHB-1.280.750.5
.300
.300
.500
.500
.260
.260
2.750
4.000
1.250
2.500
.156
.156
FC-14
FC-14
FT-7
FT-7
C0508F-STLDL1.28-1.5
—
TDHB-1.280.750.5
.360
.360
.500
.500
.322
.322
3.000
4.625
1.500
3.125
.187
.187
FC-14
FC-14
FT-7
FT-7
C0310H-STLDL1.28-1
—
TDHB-1.280.750.5
TDHB-1.280.750.5
.275
.275
.625
.625
.207
.207
4.000
5.000
1.000
2.000
.126
.126
FC-11
FC-11
FT-7
FT-7
C0410H-STLDL1.28-1.25 —
TDHB-1.280.750.5
TDHB-1.280.750.5
.300
.300
.625
.625
.260
.260
4.000
5.250
1.250
2.500
.156
.156
FC-14
FC-14
FT-7
FT-7
C0510H-STLDL1.28-1.5 —
TDHB-1.280.750.5
TDHB-1.280.750.5
.360
.360
.625
.625
.322
.322
4.000
5.625
1.500
3.125
.187
.187
FC-14
FC-14
FT-7
FT-7
left hand
C3.208X-STLDL1.28-1
—
TDHB-1.280.750.5
C0408X-STLDL1.28-1.25 —
TDHB-1.280.750.5
Carbide Shank Bars
See pages 136-138
geometry styles.
catalog number
right hand
C04M-STLDR1.28
C05M-STLDR1.28
C06S-STLDR2
C08S-STLDR2
C10M-STLDR6P
C12S-STLDR6P
left hand
C04M-STLDL1.28
C05M-STLDL1.28
C06S-STLDL2
C08S-STLDL2
C10M-STLDL6P
C12S-STLDL6P
TDHB-1.280.750.5
TDHB-1.280.750.5
TPCB-220.5
TPCB-220.5
TD-6P0.5
TD-6P0.5
Dmin
d1
d2
l1
f
.300
.360
.250
.312
.260
.322
6.000
6.000
.156
.187
FC-14
FC-14
FT-7
FT-7
.438
.563
.375
.500
.390
.510
10.000
10.000
.221
.296
QC-21
QC-26
FT-9
FT-9
.731
.855
.625
.750
.635
.760
6.000
10.000
.393
.460
SC-30
SC-30
FT-10
FT-10
– stocked
213
Inch Boring Bars with Carbide Shank
®
Trigon Inserts
C-SWU – 93° Lead
See page 138
geometry styles.
catalog number
right hand
C03M-SWUDR1.5
C04M-SWUDR1.5
C05M-SWUDR1.5
C06M-SWUDR2
C08R-SWUDR2
Dmin
d1
d2
l1
f
WPGT-1.510.5
WPGT-1.510.5
WPGT-1.510.5
.260
.285
.347
.187
.250
.312
.225
.260
.322
6.000
6.000
6.000
.126
.143
.174
MS-1438
MS-1438
MS-1438
FT-5
FT-5
FT-5
WPGT-21.50.5
WPGT-21.50.5
.415
.540
.375
.500
.385
.510
6.000
8.000
.211
.273
MS-1153
MS-1153
FT-7
FT-7
left hand
C03M-SWUDL1.5
C04M-SWUDL1.5
C05M-SWUDL1.5
C06M-SWUDL2
C08R-SWUDL2
Note: Flat on bar positions insert at 3° negative rake and .010" above centerline.
Inch Threading and Grooving Bars with Carbide Shank
C-CSE
See page 135
geometry styles.
*
catalog number
right hand
C03H-CSER1.2
C04H-CSER1.2
C06M-CSER2
—
C08R-CSER2
—
C10S-CSER2
—
Dmin
d1
d2
l1
f
CPG-1.2-030-2R
CPG-1.2-030-2R
.272
.312
.187
.250
.219
.260
4.000
4.000
.154
.175
CC-11
CC-11
FT-6
FT-6
CPG-2-030-2R
CPG-2-030-2L
CPG-2-030-2R
CPG-2-030-2L
CPG-2-030-2R
CPG-2-030-2L
.481
.481
.605
.605
.731
.731
.375
.375
.500
.500
.625
.625
.510
.510
.510
.510
.635
.635
6.000
6.000
8.000
8.000
10.000
10.000
.278
.278
.340
.340
.404
.404
QC-15
QC-15
QC-15
QC-15
QC-15
QC-15
FT-8
FT-8
FT-8
FT-8
FT-8
FT-8
left hand
—
—
—
C06M-CSEL2
—
C08R-CSEL2
—
C10S-CSEL2
* Dimensions shown are taken over the nose radius of grooving insert style CPG.
These bars are also designed to be used with threading style inserts CPT, see insert section for details.
– stocked
214
Inch Boring Bars with Coolant Capable Carbide Shank
80° Diamond Screw-On Inserts
E-SCF – 90° Lead
See page 134
geometry styles.
catalog number
right hand
E03H-SCFDR1.2
E03M-SCFDR1.2
E04H-SCFDR1.2
E04M-SCFDR1.2
Dmin
d1
d2
l1
f
CDHB-1.20.60.5
CDHB-1.20.60.5
.231
.231
.187
.187
.193
.193
4.000
6.000
.117
.117
CC-11
CC-11
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
.292
.292
.250
.250
.258
.258
4.000
6.000
.152
.152
CC-11
CC-11
FT-6
FT-6
Dmin
d1
d2
l1
f
left hand
▫
E03H-SCFDL1.2
E03M-SCFDL1.2
▫
▫
—
—
E-SCL – 95° Lead
*
See page 134
geometry styles.
catalog number
right hand
E2.5M-SC7DR1.2*
E03H-SCLDR1.2
E03M-SCLDR1.2
E03H-SCLDR1.2A
E03M-SCLDR1.2A
E04H-SCLDR1.2
E04M-SCLDR1.2
left hand
E2.5M-SC7DL1.2*
—
E03M-SCLDL1.2
E03H-SCLDL1.2A
E03M-SCLDL1.2A
E04H-SCLDL1.2
E04M-SCLDL1.2
▫
▫
▫
CDHB-1.20.60.5
.180
.156
.165
6.000
.094
CC-09
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
CDHB-1.20.60.5
.208
.208
.222
.222
.187
.187
.187
.187
.189
.189
.193
.193
4.000
6.000
4.000
6.000
.104
.104
.111
.111
CC-09
CC-09
CC-11
CC-11
FT-6
FT-6
FT-6
FT-6
CDHB-1.20.60.5
CDHB-1.20.60.5
.285
.285
.250
.250
.258
.258
4.000
6.000
.145
.145
CC-11
CC-11
FT-6
FT-6
* 97° on these bars
– stocked
215
Inch Boring Bars with Coolant Capable Carbide Shank
®
Triangle Screw-On Inserts
E-STF – 90° Lead
See pages 136-138
geometry styles.
catalog number
right hand
E03H-STFDR1.28
E03M-STFDR1.28
E04H-STFDR1.28
E04M-STFDR1.28
E05H-STFDR1.28
E05M-STFDR1.28
E06S-STFDR2
E08S-STFDR2
E10M-STFDR6P
E12S-STFDR6P
Dmin
d1
d2
l1
f
TDHB-1.280.750.5
TDHB-1.280.750.5
.275
.275
.187
.187
.203
.203
4.000
6.000
.134
.134
FC-11
FC-11
FT-7
FT-7
TDHB-1.280.750.5
TDHB-1.280.750.5
.300
.300
.250
.250
.260
.260
4.000
6.000
.156
.156
FC-14
FC-14
FT-7
FT-7
TDHB-1.280.750.5
TDHB-1.280.750.5
.360
.360
.312
.312
.322
.322
4.000
6.000
.187
.187
FC-14
FC-14
FT-7
FT-7
TPCB-220.5
TPCB-220.5
.438
.563
.375
.500
.390
.510
10.000
10.000
.221
.296
QC-21
QC-26
FT-9
FT-9
TD-6P0.5
TD-6P0.5
.731
.855
.625
.750
.635
.760
6.000
10.000
.393
.460
SC-30
SC-30
FT-10
FT-10
Dmin
d1
d2
l1
f
TDHB-1.280.750.5
TDHB-1.280.750.5
.275
.275
.187
.187
.203
.203
4.000
6.000
.126
.126
FC-11
FC-11
FT-7
FT-7
TDHB-1.280.750.5
TDHB-1.280.750.5
.300
.300
.250
.250
.260
.260
4.000
6.000
.156
.156
FC-14
FC-14
FT-7
FT-7
TDHB-1.280.750.5
TDHB-1.280.750.5
.360
.360
.312
.312
.322
.322
4.000
6.000
.187
.187
FC-14
FC-14
FT-7
FT-7
TPCB-220.5
TPCB-220.5
.438
.563
.375
.500
.390
.510
10.000
10.000
.221
.296
QC-21
QC-26
FT-9
FT-9
TD-6P0.5
TD-6P0.5
.731
.855
.625
.750
.635
.760
6.000
10.000
.393
.460
SC-30
SC-30
FT-10
FT-10
left hand
▫
▫
▫
E03H-STFDL1.28
E03M-STFDL1.28
E04H-STFDL1.28
E04M-STFDL1.28
E05H-STFDL1.28
E05M-STFDL1.28
E06S-STFDL2
E08S-STFDL2
E10M-STFDL6P
E12S-STFDL6P
▫
▫
E-STL – 95° Lead
See pages 136-138
geometry styles.
catalog number
right hand
E04H-STLDR1.28 E04M-STLDR1.28 E05H-STLDR1.28 E05M-STLDR1.28 E06S-STLDR2
E08S-STLDR2
E10M-STLDR6P
E12S-STLDR6P
E03H-STLDR1.28
E03M-STLDR1.28
– stocked
216
left hand
E03H-STLDL1.28
E03M-STLDL1.28
E04H-STLDL1.28
E04M-STLDL1.28
E05H-STLDL1.28
E05M-STLDL1.28
E06S-STLDL2
E08S-STLDL2
E10M-STLDL6P
E12S-STLDL6P
▫
▫
▫
▫
Boring Bar Sets and Accessories
Steel and Carbide
Driver Bits
KCS (Steel)
set
catalog
number
set contents bars
KCS-10 S03X-SC7DR1.2A
S03X-SCLDR1.2
S04F-SCLDR1.2
set contents bars
description
torque
in./lbs
BW078
BT6
BT7
BT8
BT9
BT10
hex bit 5/16"
#6 Torx Bit
#7 Torx Bit
#8 Torx Bit
#9 Torx Bit
#10 Torx Bit
12 - 25
4-5
7-8
12 - 14
12 - 14
12 - 15
Driver Handle
insert
(grade)
qty
1
1
1
qty
screws wrenches
CDHB-1.20.60.5 10
(KC5010)
CC-09
CC-11
FT-6
KCC (Carbide)
set
catalog
number
catalog
number
catalog
number
description
DRIVER
Magnetic Bit Driver Handle
Torque Driver
insert
(grade)
qty
qty screws wrenches
KCC-10 E03H-SCLDR1.2 1 CDHB-1.20.60.5 10 CC-09
E03H-SCLDR1.2A 1
(KC5010)
CC-11
E04H-SCLDR1.2 1
FT-6
catalog
number
description
CTS30
Adjustable Magnetic Torque Driver
catalog
number
description
UNILEVEL
Adjustable Precision Setup Level
KCSC (Steel/Carbide)
set
catalog
number
KCSC-10
set contents bars
S03X-SC7DR1.2
E03M-SCLDR1.2A
S04H-STLDR1.28
S05H-STFDR1.28
qty
1
1
1
1
insert
(grade)
qty
CDHH-1.20.60.51
(KC5010)
TDHH-1.280.750.51
(KC5010)
5
wrenches
Level
5
FT-7
FT-6
217
Kennametal
THE METALCUTTING AUTHORITY
™
PRESENTING...
TOLL-FREE CUSTOMER
APPLICATION SUPPORT
Get the metalcutting industry’s most
experienced and reliable technical and
product-application advice… absolutely
FREE! Our problem-solving/troubleshooting
professionals are standing by to ensure
that your Kennametal tools provide
optimum performance.
800/835-3668 (USA and Canada)
Monday-Friday, 7am – 7pm
(724/539-6921 outside the USA and Canada)
www.kennametal.com
218
High-Performance
Solid Carbide Drills
page
Dynapoint® TF Drill
K105, B105 (without coolant) . . . . . . . . . . . . .
220
Dynapoint SE Drill
B221, K222 (without coolant). . . . . . . . . . . . . . . . .
225
General Purpose
Series CR100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230
Series CH110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
233
Series CS120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
236
Series CN130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
238
Combined Drill and Countersink . . . . . . . . . . . . . . . . . . .
238
219
High-Performance Solid Carbide Drills
®
Dynapoint TF Drills without Coolant
K105 - inch sizes
B105 - metric sizes
.113" to .810"
3 mm to 21 mm
regular length
regular length
grades K10 and KC7210
grades K10 and KC7210
Primary Application
The TF105 drill, with its triple flutes
and high-performance 130° point, is an
excellent carbide drill for gray cast iron,
ductile iron, aluminum, non-ferrous materials,
and short-hole titanium applications.
Features
• Three spacious helical flutes provide
rapid chip evacuation and heat dissipation
to enable higher metal removal rates.
• Three active cutting edges and lands
offer better centering characteristics
compared to two-edged drills.
• The additional cutting edge also lessens
the overall wear on the drill.
• A light hone increases edge strength
and durability.
• The carbide substrate is nicely
balanced for toughness and wear
resistance.
• TiAlN coated grade KC7210 provides
higher hot hardness compared to
grade K10.
• The TiAlN coating serves as an insulator to
the drill substrate and sends heat into the
chips, rather than the drill. This allows
KC7210 to operate at higher speeds
without sacrificing tool life. These drills work
well with flood or mist coolant and in dry
drilling, too.
• Drills can be factory reconditioned by
Kennametal to original specifications.
• Combine TF105 drills with hydraulic chucks
for optimal performance and tool life.
• TF105 drills are made to operate at
elevated speeds and feeds. Please
refer to the application charts shown
on page 575 of Holemaking Catalog 0070
(A00-2).
Application Considerations
When machining titanium, make sure it is a
short-hole application with a good supply of
flood coolant.
The TF drill with TiAlN coating KC7210 is best
suited for harder, abrasive, short-chipping
material like gray cast iron, ductile iron, and
malleable cast iron. The TiAlN-coated drill
works very well with flood or mist coolant and
in dry drilling.
hardness/type
- / low
workpiece
material group
low-carbon
steels (< .25% C)
220
(<220 HB)
free-machining
steels
(<275 HB)
medium and high plain-carbon
alloy, and tool steels
(≤330 HB)
(340-450 HB)
ferritic, martensitic, and
PH stainless steels
(<375 HB)
austenitic
stainless steels
(135-275 HB)
ductile (nodular) and
malleable cast irons
(120-320 HB)
gray cast
irons
(120-320 HB)
free-machining and
low-silicon aluminum alloys
hypoeutectic
(<12.2% Si)
high-silicon
aluminum alloys
hypereutectic
(>12.2% Si)
X
X
X
X
X
X
★
★
★
X
★
miscellaneous non-ferrous
workpiece materials
iron-base,
heat-resistant alloys
(135-320 HB)
X
cobalt-base,
(150-425 HB)
X
nickel-base,
(140-475 HB)
X
titanium and
titanium alloys
(110-450 HB)
hardened
materials
(> 450 HB)
O
X
★ = 1st choice
O = 2nd choice
X = not recommended
Grade Description
grade
K10
KC7210
NOTE: See page 575 in Catalog 0070 for additional
technical information.
drill application
recommendation
high / +
composition: An uncoated straight 6% cobalt grade. Fine grain. Good wear
resistance with some toughness.
application: Use on gray cast iron, aluminum, and non-ferrous
workpiece materials.
geometry: Lightly honed cutting edges.
composition: A PVD TiAlN-coated grade. Straight 6% cobalt substrate.
Fine grain. Good hot hardness and toughness.
application: Designed for use on gray cast iron workpiece materials,
wet or dry applications.
geometry: Lightly honed cutting edges.
B105 – metric
tolerances
d1
tolerance
m7
d2
tolerance
h6
≤3
>3 to 6
>6 to 10
>10 to 18
>18 to 21
0,002/0,012
0,004/0,016
0,006/0,021
0,007/0,025
0,008/0,029
6
8 to 10
12 to 18
20
—
0,000/-0,008
0,000/-0,009
0,000/-0,011
0,000/-0,013
—
d1
grade
catalog number
mm
decimal
3,00
3,10
3,20
3,30
3,50
3,70
3,80
4,00
4,10
4,20
4,30
4,50
4,65
4,70
4,80
5,00
5,10
5,20
5,50
5,55
5,70
5,80
6,00
6,10
6,30
6,40
6,50
6,60
6,70
6,80
7,00
7,10
7,40
.1181
.1220
.1260
.1299
.1378
.1457
.1496
.1575
.1614
.1654
.1693
.1772
.1831
.1850
.1890
.1969
.2008
.2047
.2165
.2185
.2244
.2283
.2362
.2402
.2480
.2520
.2559
.2598
.2638
.2677
.2756
.2795
.2913
B105A03000
B105A03100
B105A03200
B105A03300
B105A03500
B105A03700
B105A03800
B105A04000
B105A04100
B105A04200
B105A04300
B105A04500
B105A04650
B105A04700
B105A04800
B105A05000
B105A05100
B105A05200
B105A05500
B105A05550
B105A05700
B105A05800
B105A06000
B105A06100
B105A06300
B105A06400
B105A06500
B105A06600
B105A06700
B105A06800
B105A07000
B105A07100
B105A07400
d2
mm
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
l1
mm
66
66
66
66
66
66
74
74
74
74
74
74
74
74
82
82
82
82
82
82
82
82
82
91
91
91
91
91
91
91
91
91
91
l2
mm
28
28
28
28
28
28
36
36
36
36
36
36
36
36
44
44
44
44
44
44
44
44
44
53
53
53
53
53
53
53
53
53
53
l3
mm
23
23
23
23
23
23
29
29
29
29
29
29
29
29
35
35
35
35
35
35
35
35
35
43
43
43
43
43
43
43
43
43
43
l4
mm
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
l5
mm
0,75
0,77
0,80
0,82
0,87
0,92
0,95
1,00
1,02
1,05
1,07
1,12
1,16
1,17
1,20
1,25
1,27
1,30
1,37
1,39
1,42
1,45
1,50
1,52
1,57
1,60
1,62
1,65
1,67
1,70
1,75
1,77
1,85
K10
KC7210
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
221
®
B105 – metric
tolerances
d1
tolerance
m7
d2
tolerance
h6
≤3
>3 to 6
>6 to 10
>10 to 18
>18 to 21
0,002/0,012
0,004/0,016
0,006/0,021
0,007/0,025
0,008/0,029
6
8 to 10
12 to 18
20
—
0,000/-0,008
0,000/-0,009
0,000/-0,011
0,000/-0,013
—
d1
grade
catalog number
mm
decimal
7,50
7,60
7,80
8,00
8,10
8,30
8,40
8,50
8,60
8,70
8,80
9,00
9,10
9,30
9,50
9,70
9,80
10,00
10,10
10,20
10,30
10,50
10,70
10,80
11,00
11,10
11,20
11,50
11,70
11,80
12,00
12,10
12,50
.2953
.2992
.3071
.3150
.3189
.3268
.3307
.3346
.3386
.3425
.3465
.3543
.3583
.3661
.3740
.3819
.3858
.3937
.3976
.4016
.4055
.4134
.4213
.4252
.4331
.4370
.4409
.4528
.4606
.4646
.4724
.4764
.4921
222
d2
mm
l1
mm
l2
mm
l3
mm
l4
mm
l5
mm
K10
B105A07500
B105A07600
B105A07800
B105A08000
B105A08100
B105A08300
B105A08400
B105A08500
B105A08600
B105A08700
B105A08800
B105A09000
B105A09100
B105A09300
B105A09500
B105A09700
B105A09800
B105A10000
B105A10100
B105A10200
B105A10300
B105A10500
B105A10700
B105A10800
B105A11000
B105A11100
B105A11200
B105A11500
B105A11700
B105A11800
B105A12000
B105A12100
B105A12500
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
14
14
91
91
91
91
103
103
103
103
103
103
103
103
103
103
103
103
103
103
118
118
118
118
118
118
118
118
118
118
118
118
118
124
124
53
53
53
53
61
61
61
61
61
61
61
61
61
61
61
61
61
61
71
71
71
71
71
71
71
71
71
71
71
71
71
77
77
43
43
43
43
49
49
49
49
49
49
49
49
49
49
49
49
49
49
56
56
56
56
56
56
56
56
56
56
56
56
56
60
60
36
36
36
36
40
40
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
1,87
1,90
1,95
2,00
2,02
2,07
2,10
2,12
2,15
2,17
2,20
2,25
2,27
2,32
2,37
2,42
2,45
2,50
2,52
2,55
2,57
2,62
2,67
2,70
2,75
2,77
2,80
2,87
2,92
2,95
3,00
3,02
3,12
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
KC7210
■
■
■
■
■
■
■
■
■
K105 – inch
tolerances
d1
tolerance
m7
≤.1181
>.1181 to .2362
>.2362 to .3937
>.3937 to .7087
>.7087 to .8101
.0001/.0005
.0002/.0006
.0002/.0008
.0003/.0010
.0003/.0011
tolerance
h6
d2
.1875
.0000/-.0003
.2500 to .6875 .0000/-.0004
.7500 to .8125 .0000/-.0005
—
—
—
—
d1
catalog number
grade
d2
decimal
size
mm
new
old
.1130
.1250
.1285
.1360
.1364
.1395
.1406
.1440
.1495
.1502
.1517
.1532
.1563
.1590
.1624
.1630
.1631
.1660
.1695
.1716
.1719
.1730
.1762
.1781
.1820
.1835
.1875
.1890
.1910
.1935
.1976
.2002
.2045
.2130
.2175
.2188
.2279
.2280
.2342
33
1/8
30
29
2,87
3,18
3,26
3,45
3,46
3,54
3,57
3,66
3,80
3,82
3,85
3,89
3,97
4,04
4,12
4,14
4,14
4,22
4,31
4,36
4,37
4,39
4,48
4,52
4,62
4,66
4,76
4,80
4,85
4,91
5,02
5,09
5,19
5,41
5,52
5,56
5,79
5,79
5,95
K105A01130
K105A01250
K105A01285
K105A01360
K105A01364
K105A01395
K105A01406
K105A01440
K105A01495
K105A01502
K105A01517
K105A01532
K105A01563
K105A01590
K105A01624
K105A01630
K105A01631
K105A01660
K105A01695
K105A01716
K105A01719
K105A01730
K105A01762
K105A01781
K105A01820
K105A01835
K105A01875
K105A01890
K105A01910
K105A01935
K105A01976
K105A02002
K105A02045
K105A02130
K105A02175
K105A02188
K105A02279
K105A02280
K105A02342
KTF01130
KTF01250
KTF01285
KTF01360
9/64
27
25
5/32
21
19
18
11/64
17
14
3/16
12
11
10
3
7/32
1
KTF01406
KTF01440
KTF01563
KTF01590
KTF01630
KTF01631
KTF01660
KTF01695
KTF01719
KTF01730
KTF01875
KTF01890
KTF01910
KTF01935
KTF02188
KTF02280
l1
l2
l3
l4
l5
K10
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.1875
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
.2500
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
2.91
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.23
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.69
1.69
1.69
1.69
1.69
1.69
1.69
1.69
1.69
1.69
1.69
1.69
.843
.843
.843
.843
.843
.843
.843
.843
.843
.843
.843
.843
.843
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.126
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.374
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.44
.030
.031
.032
.034
.034
.035
.035
.036
.037
.038
.038
.038
.039
.040
.041
.041
.041
.041
.042
.043
.043
.043
.044
.044
.045
.046
.047
.047
.048
.048
.049
.050
.051
.053
.054
.055
.057
.057
.059
■
■
■
■
■
■
■
■
KC7210
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
See page 82 of Holemaking Catalog 0070 (A00-2) for the Dyna-Fit tap drill program.
223
®
K105 – inch
tolerances
d1
tolerance
m7
≤.1181
>.1181 to .2362
>.2362 to .3937
>.3937 to .7087
>.7087 to .8101
.0001/.0005
.0002/.0006
.0002/.0008
.0003/.0010
.0003/.0011
tolerance
h6
d2
.1875
.0000/-.0003
.2500 to .6875 .0000/-.0004
.7500 to .8125 .0000/-.0005
—
—
—
—
d1
catalog number
grade
d2
decimal
size
mm
new
old
.2500
.2530
.2570
.2620
.2656
.2720
.2746
.2813
.2870
.2879
.2941
.2969
.3125
.3182
.3281
.3320
.3371
.3438
.3474
.3566
.3594
.3680
.3726
.3750
.3906
.3920
.4059
.4063
.4154
.4219
.4301
.4375
.4531
.4545
.4660
.4688
.4779
.4844
.4867
.5000
1/4, E
6,35
6,43
6,53
6,65
6,75
6,91
6,97
7,15
7,29
7,31
7,47
7,54
7,94
8,08
8,33
8,43
8,56
8,73
8,82
9,06
9,13
9,35
9,46
9,53
9,92
9,96
10,31
10,32
10,55
10,72
10,92
11,11
11,51
11,54
11,84
11,91
12,14
12,30
12,36
12,70
K105A02500
K105A02530
K105A02570
K105A02620
K105A02656
K105A02720
K105A02746
K105A02813
K105A02870
K105A02879
K105A02941
K105A02969
K105A03125
K105A03182
K105A03281
K105A03320
K105A03371
K105A03438
K105A03474
K105A03566
K105A03594
K105A03680
K105A03726
K105A03750
K105A03906
K105A03920
K105A04059
K105A04063
K105A04154
K105A04219
K105A04301
K105A04375
K105A04531
K105A04545
K105A04660
K105A04688
K105A04779
K105A04844
K105A04867
K105A05000
KTF02500
KTF02530
KTF02570
F
17/64
I
9/32
19/64
5/16
21/64
Q
11/32
23/64
U
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
See page 82 of Holemaking Catalog 0070 (A00-2).
224
KTF02656
KTF02813
KTF02870
KTF02969
KTF03125
KTF03281
KTF03438
KTF03594
KTF03750
KTF03906
KTF04063
KTF04219
KTF04375
KTF04531
KTF04688
KTF04844
KTF05000
.2500
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.3750
.4375
.4375
.4375
.4375
.4375
.4375
.4375
.4375
.5000
.5000
.5000
.5000
.5000
.5000
.5000
.5000
l1
3.23
3.58
3.58
3.58
3.58
3.58
3.58
3.58
3.58
3.58
3.58
3.58
3.58
4.06
4.06
4.06
4.06
4.06
4.06
4.06
4.06
4.06
4.06
4.06
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
l2
1.69
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.36
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
l3
1.374
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.587
1.917
1.917
1.917
1.917
1.917
1.917
1.917
1.917
1.917
1.917
1.917
2.091
2.091
2.091
2.091
2.091
2.091
2.091
2.091
2.189
2.189
2.189
2.189
2.189
2.189
2.189
2.189
l4
1.44
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.67
1.67
1.67
1.67
1.67
1.67
1.67
1.67
1.79
1.79
1.79
1.79
1.79
1.79
1.79
1.79
l5
.062
.063
.064
.065
.066
.068
.069
.070
.072
.072
.073
.074
.078
.079
.082
.083
.084
.086
.087
.089
.090
.092
.093
.094
.098
.098
.101
.101
.104
.105
.107
.109
.113
.114
.116
.117
.119
.121
.122
.125
K10
KC7210
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Dynapoint SE Drills without Coolant
B221 - metric sizes
K222 - inch sizes
3 mm to 21 mm
.125" to .750"
short length
regular length
grade CS5
grade KC7215
Primary Application
SE drills without coolant are best applied
on short-hole applications. These drills may
increase tool life compared to drills with
coolant by avoiding thermal shock at the
cutting edge. Drill strength is increased by
the absence of coolant holes. Deeper holes
benefit from the flushing action of the coolant
to remove chips from the cutting zone.
The K222 SE drill features a KC7215 carbide
grade; the B221 drill is manufactured with a
CS5 carbide grade. Both are ideal for plain
carbon, alloy, and tool steel applications. In
addition, K222 performs well on cast iron
and ductile iron.
Features
• The patented high-performance SE
point defines reliability in high-speed,
high-feed drilling applications.
• The carbide substrate of the SE221 drill is a
multi-purpose submicron grade with TiN
coating. The SE222 features a TiAlN coating
that offers excellent hot hardness.
• A moderate hone on the drills’ cutting
edges combined with a heavy-duty
core increases drill strength and provides
additional protection for the cutting edges.
• Drills can be factory reconditioned by
Kennametal to original specifications.
• Combine with hydraulic chucks for optimal
performance and tool life.
• These drills are made to operate at
higher speeds and feeds. Please refer
to the application charts shown on page
575 of Holemaking Catalog 0070 (A00-2).
Application Considerations
The metric size B221 drill has a short flute
length for shallow-hole applications. The
inch size K222 series features a regular flute
length for deeper hole applications. Both drills
are designed for flood coolant.
hardness/type
drill application
recommendation
- / low
high / +
workpiece
material group
low-carbon
steels (< .25% C)
★
(<220 HB)
free-machining
steels
(<275 HB)
(≤330 HB)
(340-450 HB)
ferritic, martensitic, and
PH stainless steels
(<375 HB)
austenitic
stainless steels
(135-275 HB)
ductile (nodular) and
malleable cast irons
(120-320 HB)
★
★
★
X
X
O
gray cast
irons
(120-320 HB)
free-machining and
low-silicon aluminum alloys
hypoeutectic
(<12.2% Si)
X
high-silicon
aluminum alloys
hypereutectic
(>12.2% Si)
X
miscellaneous non-ferrous
workpiece materials
O
X
iron-base,
(135-320 HB)
X
cobalt-base,
(150-425 HB)
X
nickel-base,
(140-475 HB)
X
titanium and
titanium alloys
(110-450 HB)
X
hardened
materials
(> 450 HB)
X
★ = 1st choice
O = 2nd choice
X = not recommended
Grade Description
grade
NOTE: See page 575 of Holemaking Catalog 0070
(A00-2) for additional technical information.
CS5
KC7215
composition: A PVD TiN coated grade. Straight 9.5% cobalt substrate.
Submicron grain. Muti-purpose use.
application: Apply on plain-carbon steel, alloy steel, and ductile cast iron.
geometry: Moderately honed cutting edges with a protection chamfer.
composition: A PVD TiAlN-coated grade. Straight 9.5% cobalt substrate.
Submicron grain. Multi-purpose use. Excellent wear resistance, high heat
and chemical resistance, and toughness.
application: A general purpose grade for steel and ductile iron applications.
geometry: Moderately honed cutting edges with a protection chamfer.
225
®
B221 – metric
tolerances
d1
tolerance
m7
d2
tolerance
h6
≤3
>3 to 6
>6 to 10
>10 to 18
>18 to 21
0,002/0,012
0,004/0,016
0,006/0,021
0,007/0,025
0,008/0,029
6
8 to 10
12 to 18
20
—
0,000/-0,008
0,000/-0,009
0,000/-0,011
0,000/-0,013
—
d1
226
mm
decimal
3,00
3,10
3,20
3,30
3,40
3,50
3,60
3,70
3,80
3,90
4,00
4,10
4,20
4,30
4,40
4,50
4,60
4,70
4,80
4,90
5,00
5,10
5,20
5,30
5,40
5,50
5,60
5,70
5,80
5,90
6,00
6,10
.1181
.1220
.1260
.1299
.1339
.1378
.1417
.1457
.1496
.1535
.1575
.1614
.1654
.1693
.1732
.1772
.1811
.1850
.1890
.1929
.1969
.2008
.2047
.2087
.2126
.2165
.2205
.2244
.2283
.2323
.2362
.2402
catalog number
d2
mm
l1
mm
l2
mm
l3
mm
l4
mm
l5
mm
grade
CS5
B221A03000
B221A03100
B221A03200
B221A03300
B221A03400
B221A03500
B221A03600
B221A03700
B221A03800
B221A03900
B221A04000
B221A04100
B221A04200
B221A04300
B221A04400
B221A04500
B221A04600
B221A04700
B221A04800
B221A04900
B221A05000
B221A05100
B221A05200
B221A05300
B221A05400
B221A05500
B221A05600
B221A05700
B221A05800
B221A05900
B221A06000
B221A06100
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
62
62
62
62
62
62
62
62
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
79
20
20
20
20
20
20
20
20
24
24
24
24
24
24
24
24
24
24
28
28
28
28
28
28
28
28
28
28
28
28
28
34
14
14
14
14
14
14
14
14
17
17
17
17
17
17
17
17
17
17
20
20
20
20
20
20
20
20
20
20
20
20
20
24
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
0,48
0,50
0,52
0,53
0,55
0,56
0,58
0,60
0,61
0,63
0,65
0,66
0,68
0,69
0,71
0,73
0,74
0,76
0,77
0,79
0,81
0,82
0,84
0,86
0,87
0,89
0,90
0,92
0,94
0,95
0,97
0,98
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
B221 – metric
tolerances
d1
tolerance
m7
d2
tolerance
h6
≤3
>3 to 6
>6 to 10
>10 to 18
>18 to 21
0,002/0,012
0,004/0,016
0,006/0,021
0,007/0,025
0,008/0,029
6
8 to 10
12 to 18
20
—
0,000/-0,008
0,000/-0,009
0,000/-0,011
0,000/-0,013
—
d1
mm
decimal
6,20
6,30
6,40
6,50
6,60
6,70
6,80
6,90
7,00
7,10
7,20
7,30
7,40
7,50
7,60
7,70
7,80
7,90
8,00
8,10
8,20
8,30
8,40
8,50
8,60
8,70
8,80
8,90
9,00
9,10
9,20
9,30
.2441
.2480
.2520
.2559
.2598
.2638
.2677
.2717
.2756
.2795
.2835
.2874
.2913
.2953
.2992
.3031
.3071
.3110
.3150
.3189
.3228
.3268
.3307
.3346
.3386
.3425
.3465
.3504
.3543
.3583
.3622
.3661
catalog number
d2
mm
l1
mm
l2
mm
l3
mm
l4
mm
l5
mm
grade
CS5
B221A06200
B221A06300
B221A06400
B221A06500
B221A06600
B221A06700
B221A06800
B221A06900
B221A07000
B221A07100
B221A07200
B221A07300
B221A07400
B221A07500
B221A07600
B221A07700
B221A07800
B221A07900
B221A08000
B221A08100
B221A08200
B221A08300
B221A08400
B221A08500
B221A08600
B221A08700
B221A08800
B221A08900
B221A09000
B221A09100
B221A09200
B221A09300
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
89
89
89
89
89
89
89
89
89
89
89
89
89
34
34
34
34
34
34
34
34
34
41
41
41
41
41
41
41
41
41
41
47
47
47
47
47
47
47
47
47
47
47
47
47
24
24
24
24
24
24
24
24
24
29
29
29
29
29
29
29
29
29
29
35
35
35
35
35
35
35
35
35
35
35
35
35
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
40
40
40
40
40
40
40
40
40
40
40
40
40
1,00
1,02
1,03
1,05
1,07
1,08
1,10
1,11
1,13
1,15
1,16
1,18
1,19
1,21
1,23
1,24
1,26
1,28
1,29
1,31
1,32
1,34
1,36
1,37
1,39
1,40
1,42
1,44
1,45
1,47
1,48
1,50
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
227
®
B221 – metric
tolerances
d1
tolerance
m7
d2
tolerance
h6
≤3
>3 to 6
>6 to 10
>10 to 18
>18 to 21
0,002/0,012
0,004/0,016
0,006/0,021
0,007/0,025
0,008/0,029
6
8 to 10
12 to 18
20
—
0,000/-0,008
0,000/-0,009
0,000/-0,011
0,000/-0,013
—
d1
228
mm
decimal
9,40
9,50
9,60
9,70
9,80
9,90
10,00
10,10
10,20
10,30
10,40
10,50
10,60
10,70
10,80
10,90
11,00
11,10
11,20
11,30
11,40
11,50
11,60
11,70
11,80
11,90
12,00
12,10
12,20
12,30
12,40
12,50
12,60
.3701
.3740
.3780
.3819
.3858
.3898
.3937
.3976
.4016
.4055
.4094
.4134
.4173
.4213
.4252
.4291
.4331
.4370
.4409
.4449
.4488
.4528
.4567
.4606
.4646
.4685
.4724
.4764
.4803
.4843
.4882
.4921
.4961
catalog number
d2
mm
l1
mm
l2
mm
l3
mm
l4
mm
l5
mm
grade
CS5
B221A09400
B221A09500
B221A09600
B221A09700
B221A09800
B221A09900
B221A10000
B221A10100
B221A10200
B221A10300
B221A10400
B221A10500
B221A10600
B221A10700
B221A10800
B221A10900
B221A11000
B221A11100
B221A11200
B221A11300
B221A11400
B221A11500
B221A11600
B221A11700
B221A11800
B221A11900
B221A12000
B221A12100
B221A12200
B221A12300
B221A12400
B221A12500
B221A12600
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
89
89
89
89
89
89
89
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
107
107
107
107
107
107
47
47
47
47
47
47
47
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
60
60
60
60
60
60
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
43
43
43
43
43
43
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
1,52
1,53
1,55
1,57
1,58
1,60
1,61
1,63
1,65
1,66
1,68
1,69
1,71
1,73
1,74
1,76
1,78
1,79
1,81
1,82
1,84
1,86
1,87
1,89
1,90
1,92
1,94
1,95
1,97
1,99
2,00
2,02
2,03
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
K222 – inch
tolerances
d1
tolerance
m7
>.1181 to .2362
>.2362 to .3937
>.3937 to .7087
>.7087 to .7500
.0002/.0006
.0002/.0008
.0003/.0010
.0003/.0011
d2
tolerance
h6
.1875
.0000/-.0003
.2500 to .6875 .0000/-.0004
.7500
.0000/-.0005
—
—
d1
catalog number
decimal
size
mm
new
old
.1250
.1563
.1875
.2188
.2500
.2656
.2813
.2969
.3125
.3281
.3438
.3594
.3750
.3906
.4063
.4219
.4375
.4531
.4688
.4844
.5000
1/8
5/32
3/16
7/32
1/4, E
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
3,18
3,97
4,76
5,56
6,35
6,75
7,15
7,54
7,94
8,33
8,73
9,13
9,53
9,92
10,32
10,72
11,11
11,51
11,91
12,30
12,70
K222A01250
K222A01563
K222A01875
K222A02188
K222A02500
K222A02656
K222A02813
K222A02969
K222A03125
K222A03281
K222A03438
K222A03594
K222A03750
K222A03906
K222A04063
K222A04219
K222A04375
K222A04531
K222A04688
K222A04844
K222A05000
KSE01250
KSE01563
KSE01875
KSE02188
KSE02500
KSE02656
KSE02813
KSE02969
KSE03125
KSE03281
KSE03438
KSE03594
KSE03750
KSE03906
KSE04063
KSE04219
KSE04375
KSE04531
KSE04688
KSE04844
KSE05000
d2
l1
l2
l3
l4
l5
grade
KC7215
.1875
.1875
.1875
.2500
.2500
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.3750
.4375
.4375
.4375
.4375
.5000
.5000
.5000
.5000
2.60
2.60
2.91
3.23
3.23
3.58
3.58
3.58
3.58
4.06
4.06
4.06
4.06
4.37
4.37
4.37
4.37
4.65
4.65
4.65
4.65
1.06
1.06
1.38
1.69
1.69
1.97
1.97
1.97
1.97
2.36
2.36
2.36
2.36
2.60
2.60
2.60
2.60
2.76
2.76
2.76
2.76
.843
.843
1.126
1.374
1.374
1.587
1.587
1.587
1.587
1.917
1.917
1.917
1.917
2.091
2.091
2.091
2.091
2.189
2.189
2.189
2.189
1.44
1.44
1.44
1.44
1.44
1.52
1.52
1.52
1.52
1.59
1.59
1.59
1.59
1.67
1.67
1.67
1.67
1.79
1.79
1.79
1.79
.020
.025
.030
.035
.040
.043
.045
.048
.050
.053
.056
.058
.061
.063
.066
.068
.071
.073
.076
.078
.081
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
229
General-Purpose Solid Carbide Drills
®
Series CR100
•
•
•
•
118° point angle
20° helix
Jobber length for general purpose applications
recommended for steel, cast iron, non-ferrous,
plastics, and other abrasive materials
d1
catalog number
decimal
size
mm
new
old
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1563
.1719
.1875
.2031
.2188
.2344
.2500
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
1,19
1,59
1,98
2,38
2,78
3,18
3,57
3,97
4,37
4,76
5,16
5,56
5,95
6,35
KWCD00337
KWCD00338
KWCD00339
KWCD00340
KWCD00341
KWCD00342
KWCD00343
KWCD00344
KWCD00345
KWCD00346
KWCD00347
KWCD00348
KWCD00349
KWCD00350
40513900337
40513900338
40513900339
40513900340
40513900341
40513900342
40513900343
40513900344
40513900345
40513900346
40513900347
40513900348
40513900349
40513900350
Grade Description
grade
K600
230
composition: An uncoated 10% cobalt, fine-grain carbide.
application: Ideal for general purpose drilling of all materials.
d2
l1
l2
l3
l4
l5
grade
K600
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1563
.1719
.1875
.2031
.2188
.2344
.2500
1.51
1.52
1.77
2.03
2.28
2.29
2.54
2.55
2.80
2.81
3.06
3.07
3.32
3.33
.33
.77
.77
.90
1.03
1.29
1.29
1.42
1.43
1.68
1.69
1.82
1.82
2.08
.191
.638
.647
.781
.916
1.175
1.184
1.319
1.328
1.588
1.597
1.731
1.741
2.000
1.19
.75
1.00
1.13
1.25
1.00
1.25
1.12
1.37
1.12
1.37
1.25
1.50
1.25
.014
.019
.023
.028
.033
.038
.042
.047
.052
.056
.061
.066
.070
.075
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Series CR100
•
•
•
•
118° point angle
20° helix
d1
catalog number
decimal
size
mm
new
old
.0400
.0410
.0420
.0430
.0465
.0520
.0550
.0595
.0635
.0670
.0700
.0730
.0760
.0785
.0810
.0820
.0860
.0890
.0935
.0960
.0980
.0995
.1015
.1040
.1065
.1100
.1110
.1130
.1160
.1200
#60
#59
#58
#57
#56
#55
#54
#53
#52
#51
#50
#49
#48
#47
#46
#45
#44
#43
#42
#41
#40
#39
#38
#37
#36
#35
#34
#33
#32
#31
1,02
1,04
1,07
1,09
1,18
1,32
1,40
1,51
1,61
1,70
1,78
1,85
1,93
1,99
2,06
2,08
2,18
2,26
2,37
2,44
2,49
2,53
2,58
2,64
2,71
2,79
2,82
2,87
2,95
3,05
KWCD00387
KWCD00388
KWCD00389
KWCD00390
KWCD00391
KWCD00392
KWCD00393
KWCD00394
KWCD00395
KWCD00396
KWCD00397
KWCD00398
KWCD00399
KWCD00400
KWCD00401
KWCD00402
KWCD00403
KWCD00404
KWCD00405
KWCD00406
KWCD00407
KWCD00408
KWCD00409
KWCD00410
KWCD00411
KWCD00412
KWCD00413
KWCD00414
KWCD00415
KWCD00416
40513900387
40513900388
40513900389
40513900390
40513900391
40513900392
40513900393
40513900394
40513900395
40513900396
40513900397
40513900398
40513900399
40513900400
40513900401
40513900402
40513900403
40513900404
40513900405
40513900406
40513900407
40513900408
40513900409
40513900410
40513900411
40513900412
40513900413
40513900414
40513900415
40513900416
d2
l1
l2
l3
l4
l5
grade
K600
.0400
.0410
.0420
.0430
.0465
.0520
.0550
.0595
.0635
.0670
.0700
.0730
.0760
.0785
.0810
.0820
.0860
.0890
.0935
.0960
.0980
.0995
.1015
.1040
.1065
.1100
.1110
.1130
.1160
.1200
1.51
1.51
1.51
1.51
1.51
1.52
1.52
1.52
1.52
1.52
1.77
1.77
1.77
1.77
1.77
1.77
2.03
2.03
2.03
2.03
2.03
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.29
3.01
.76
.76
.76
.76
.77
.77
.77
.77
.77
.90
.90
.90
.90
.90
1.02
1.03
1.03
1.03
1.03
1.03
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.29
2.874
.625
.625
.626
.628
.631
.633
.636
.638
.640
.767
.769
.771
.772
.774
.899
.902
.903
.906
.908
.909
1.160
1.161
1.162
1.164
1.166
1.167
1.168
1.170
1.172
1.50
.75
.75
.75
.75
.75
.75
.75
.75
.75
.87
.87
.87
.88
.87
.75
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
.012
.012
.013
.013
.014
.016
.017
.018
.019
.020
.021
.022
.023
.024
.024
.025
.026
.027
.028
.029
.029
.030
.030
.031
.032
.033
.033
.034
.035
.036
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
231
®
Series CR100
•
•
•
•
118° point angle
20° helix
d1
catalog number
decimal
size
mm
new
old
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
#30
#29
#28
#27
#26
#25
#24
#23
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
#12
#11
#10
#9
#8
#7
#6
#5
#4
#3
#2
#1
3,26
3,45
3,57
3,66
3,73
3,80
3,86
3,91
3,99
4,04
4,09
4,22
4,31
4,39
4,50
4,57
4,62
4,70
4,80
4,85
4,91
4,98
5,05
5,11
5,18
5,22
5,31
5,41
5,61
5,79
KWCD00417
KWCD00418
KWCD00419
KWCD00420
KWCD00421
KWCD00422
KWCD00423
KWCD00424
KWCD00425
KWCD00426
KWCD00427
KWCD00428
KWCD00429
KWCD00430
KWCD00431
KWCD00432
KWCD00433
KWCD00434
KWCD00435
KWCD00436
KWCD00437
KWCD00438
KWCD00439
KWCD00440
KWCD00441
KWCD00442
KWCD00443
KWCD00444
KWCD00445
KWCD00446
40513900417
40513900418
40513900419
40513900420
40513900421
40513900422
40513900423
40513900424
40513900425
40513900426
40513900427
40513900428
40513900429
40513900430
40513900431
40513900432
40513900433
40513900434
40513900435
40513900436
40513900437
40513900438
40513900439
40513900440
40513900441
40513900442
40513900443
40513900444
40513900445
40513900446
232
d2
l1
l2
l3
l4
l5
grade
K600
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
2.29
2.54
2.54
2.54
2.54
2.54
2.55
2.55
2.55
2.55
2.55
2.80
2.80
2.80
2.80
2.80
2.80
2.81
2.81
2.81
2.81
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.07
3.07
1.29
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.67
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.81
1.81
1.81
1.81
1.81
1.81
1.81
1.82
1.82
1.177
1.307
1.309
1.312
1.313
1.315
1.316
1.318
1.319
1.321
1.322
1.575
1.577
1.579
1.581
1.583
1.584
1.586
1.589
1.590
1.591
1.718
1.720
1.721
1.723
1.723
1.726
1.728
1.733
1.737
1.00
1.13
1.12
1.13
1.13
1.12
1.13
1.13
1.13
1.13
1.13
1.13
1.12
1.13
1.13
1.13
1.13
1.13
1.13
1.13
1.12
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
.039
.041
.042
.043
.044
.045
.046
.046
.047
.048
.048
.050
.051
.052
.053
.054
.055
.056
.057
.057
.058
.059
.060
.060
.061
.062
.063
.064
.066
.068
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Series CH110
•
•
•
•
118° point angle
fast spiral
recommended for softer ferrous and non-ferrous
materials that produce stringy chips
d1
catalog number
decimal
size
mm
new
old
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1563
.1719
.1875
.2031
.2188
.2344
.2500
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
1,19
1,59
1,98
2,38
2,78
3,18
3,57
3,97
4,37
4,76
5,16
5,56
5,95
6,35
KWCD00448
KWCD00449
KWCD00450
KWCD00451
KWCD00452
KWCD00453
KWCD00454
KWCD00455
KWCD00456
KWCD00457
KWCD00458
KWCD00459
KWCD00460
KWCD00461
40513900448
40513900449
40513900450
40513900451
40513900452
40513900453
40513900454
40513900455
40513900456
40513900457
40513900458
40513900459
40513900460
40513900461
d2
l1
l2
l3
l4
l5
grade
K600
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1563
.1719
.1875
.2031
.2188
.2344
.2500
1.51
1.52
1.77
2.03
2.28
2.29
2.54
2.55
2.80
2.81
3.06
3.07
3.32
3.33
.33
.77
.77
.90
1.03
1.29
1.29
1.42
1.43
1.68
1.69
1.82
1.82
2.08
.191
.638
.647
.781
.916
1.175
1.184
1.319
1.328
1.588
1.597
1.731
1.741
2.000
1.19
.75
1.00
1.13
1.25
1.00
1.25
1.12
1.37
1.12
1.37
1.25
1.50
1.25
.014
.019
.023
.028
.033
.038
.042
.047
.052
.056
.061
.066
.070
.075
■
■
■
■
■
■
■
■
■
■
■
■
■
■
233
®
Series CH110
•
•
•
•
118° point angle
fast spiral
d1
catalog number
decimal
size
mm
new
old
.0400
.0410
.0420
.0430
.0465
.0520
.0550
.0595
.0635
.0670
.0700
.0730
.0760
.0785
.0810
.0820
.0860
.0890
.0935
.0960
.0980
.0995
.1015
.1040
.1065
.1100
.1110
.1130
.1160
.1200
#60
#59
#58
#57
#56
#55
#54
#53
#52
#51
#50
#49
#48
#47
#46
#45
#44
#43
#42
#41
#40
#39
#38
#37
#36
#35
#34
#33
#32
#31
1,02
1,04
1,07
1,09
1,18
1,32
1,40
1,51
1,61
1,70
1,78
1,85
1,93
1,99
2,06
2,08
2,18
2,26
2,37
2,44
2,49
2,53
2,58
2,64
2,71
2,79
2,82
2,87
2,95
3,05
KWCD00498
KWCD00499
KWCD00500
KWCD00501
KWCD00502
KWCD00503
KWCD00504
KWCD00505
KWCD00506
KWCD00507
KWCD00508
KWCD00509
KWCD00510
KWCD00511
KWCD00512
KWCD00513
KWCD00514
KWCD00515
KWCD00516
KWCD00517
KWCD00518
KWCD00519
KWCD00520
KWCD00521
KWCD00522
KWCD00523
KWCD00524
KWCD00525
KWCD00526
KWCD00527
40513900498
40513900499
40513900500
40513900501
40513900502
40513900503
40513900504
40513900505
40513900506
40513900507
40513900508
40513900509
40513900510
40513900511
40513900512
40513900513
40513900514
40513900515
40513900516
40513900517
40513900518
40513900519
40513900520
40513900521
40513900522
40513900523
40513900524
40513900525
40513900526
40513900527
234
d2
l1
l2
l3
l4
l5
grade
K600
.0400
.0410
.0420
.0430
.0465
.0520
.0550
.0595
.0635
.0670
.0700
.0730
.0760
.0785
.0810
.0820
.0860
.0890
.0935
.0960
.0980
.0995
.1015
.1040
.1065
.1100
.1110
.1130
.1160
.1200
1.51
1.51
1.51
1.51
1.51
1.52
1.52
1.52
1.52
1.52
1.77
1.77
1.77
1.77
1.77
1.77
2.03
2.03
2.03
2.03
2.03
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.29
3.01
.76
.76
.76
.76
.77
.77
.77
.77
.77
.90
.90
.90
.90
.90
1.02
1.03
1.03
1.03
1.03
1.03
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.29
2.874
.625
.625
.626
.628
.631
.633
.636
.638
.640
.767
.769
.771
.772
.774
.899
.902
.903
.906
.908
.909
1.160
1.161
1.162
1.164
1.166
1.167
1.168
1.170
1.172
1.50
.75
.75
.75
.75
.75
.75
.75
.75
.75
.87
.87
.87
.88
.87
.75
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
.012
.012
.013
.013
.014
.016
.017
.018
.019
.020
.021
.022
.023
.024
.024
.025
.026
.027
.028
.029
.029
.030
.030
.031
.032
.033
.033
.034
.035
.036
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Series CH110
•
•
•
•
118° point angle
fast spiral
d1
catalog number
decimal
size
mm
new
old
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
#30
#29
#28
#27
#26
#25
#24
#23
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
#12
#11
#10
#9
#8
#7
#6
#5
#4
#3
#2
#1
3,26
3,45
3,57
3,66
3,73
3,80
3,86
3,91
3,99
4,04
4,09
4,22
4,31
4,39
4,50
4,57
4,62
4,70
4,80
4,85
4,91
4,98
5,05
5,11
5,18
5,22
5,31
5,41
5,61
5,79
KWCD00528
KWCD00529
KWCD00530
KWCD00531
KWCD00532
KWCD00533
KWCD00534
KWCD00535
KWCD00536
KWCD00537
KWCD00538
KWCD00539
KWCD00540
KWCD00541
KWCD00542
KWCD00543
KWCD00544
KWCD00545
KWCD00546
KWCD00547
KWCD00548
KWCD00549
KWCD00550
KWCD00551
KWCD00552
KWCD00553
KWCD00554
KWCD00555
KWCD00556
KWCD00557
40513900528
40513900529
40513900530
40513900531
40513900532
40513900533
40513900534
40513900535
40513900536
40513900537
40513900538
40513900539
40513900540
40513900541
40513900542
40513900543
40513900544
40513900545
40513900546
40513900547
40513900548
40513900549
40513900550
40513900551
40513900552
40513900553
40513900554
40513900555
40513900556
40513900557
d2
l1
l2
l3
l4
l5
grade
K600
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
2.29
2.54
2.54
2.54
2.54
2.54
2.55
2.55
2.55
2.55
2.55
2.80
2.80
2.80
2.80
2.80
2.80
2.81
2.81
2.81
2.81
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.07
3.07
1.29
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.42
1.67
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.68
1.81
1.81
1.81
1.81
1.81
1.81
1.81
1.82
1.82
1.177
1.307
1.309
1.312
1.313
1.315
1.316
1.318
1.319
1.321
1.322
1.575
1.577
1.579
1.581
1.583
1.584
1.586
1.589
1.590
1.591
1.718
1.720
1.721
1.723
1.723
1.726
1.728
1.733
1.737
1.00
1.13
1.12
1.13
1.13
1.12
1.13
1.13
1.13
1.13
1.13
1.13
1.12
1.13
1.13
1.13
1.13
1.13
1.13
1.13
1.12
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
.039
.041
.042
.043
.044
.045
.046
.046
.047
.048
.048
.050
.051
.052
.053
.054
.055
.056
.057
.057
.058
.059
.060
.060
.061
.062
.063
.064
.066
.068
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
235
®
Series CS120
•
•
•
•
135° straight flute
recommended for hole depths of 2x to 3x diameter
excellent hole quality
recommended for stainless steels, hardened materials,
and abrasive materials
d1
decimal
size
fractional drills
.0469
3/64
.0625
1/16
.0781
5/64
.0938
3/32
.1094
7/64
.1250
1/8
.1406
9/64
.1563
5/32
.1719
11/64
.1875
3/16
.2031
13/64
.2188
7/32
.2344
15/64
.2500
1/4
number drills
.0400
#60
.0410
#59
.0420
#58
.0430
#57
.0465
#56
.0520
#55
.0550
#54
.0595
#53
.0635
#52
.0670
#51
.0700
#50
.0730
#49
.0760
#48
.0785
#47
.0810
#46
.0820
#45
.0860
#44
.0890
#43
.0935
#42
.0960
#41
.0980
#40
.0995
#39
.1015
#38
.1040
#37
.1065
#36
.1100
#35
.1110
#34
.1130
#33
.1160
#32
.1200
#31
236
catalog number
d2
l1
l2
l3
l4
l5
grade
K600
mm
new
old
1,19
1,59
1,98
2,38
2,78
3,18
3,57
3,97
4,37
4,76
5,16
5,56
5,95
6,35
KWCD00558
KWCD00559
KWCD00560
KWCD00561
KWCD00562
KWCD00563
KWCD00564
KWCD00565
KWCD00566
KWCD00567
KWCD00568
KWCD00569
KWCD00570
KWCD00571
40513900558
40513900559
40513900560
40513900561
40513900562
40513900563
40513900564
40513900565
40513900566
40513900567
40513900568
40513900569
40513900570
40513900571
.0469
.0625
.0781
.0938
.1094
.1250
.1406
.1563
.1719
.1875
.2031
.2188
.2344
.2500
1.50
1.50
1.69
1.75
1.81
1.88
1.94
2.06
2.13
2.19
2.25
2.38
2.44
2.50
.50
.63
.69
.75
.81
.88
.94
1.00
1.06
1.13
1.19
1.25
1.31
1.38
.103
.138
.172
.207
.241
.276
.310
.345
.379
.414
.448
.483
.517
.552
1.00
.88
1.00
1.00
1.00
1.00
1.00
1.06
1.06
1.06
1.06
1.13
1.13
1.13
.010
.013
.016
.019
.023
.026
.029
.032
.036
.039
.042
.045
.049
.052
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1,02
1,04
1,07
1,09
1,18
1,32
1,40
1,51
1,61
1,70
1,78
1,85
1,93
1,99
2,06
2,08
2,18
2,26
2,37
2,44
2,49
2,53
2,58
2,64
2,71
2,79
2,82
2,87
2,95
3,05
KWCD00588
KWCD00589
KWCD00590
KWCD00591
KWCD00592
KWCD00593
KWCD00594
KWCD00595
KWCD00596
KWCD00597
KWCD00598
KWCD00599
KWCD00600
KWCD00601
KWCD00602
KWCD00603
KWCD00604
KWCD00605
KWCD00606
KWCD00607
KWCD00608
KWCD00609
KWCD00610
KWCD00611
KWCD00612
KWCD00613
KWCD00614
KWCD00615
KWCD00616
KWCD00617
40513900588
40513900589
40513900590
40513900591
40513900592
40513900593
40513900594
40513900595
40513900596
40513900597
40513900598
40513900599
40513900600
40513900601
40513900602
40513900603
40513900604
40513900605
40513900606
40513900607
40513900608
40513900609
40513900610
40513900611
40513900612
40513900613
40513900614
40513900615
40513900616
40513900617
.0400
.0410
.0420
.0430
.0465
.0520
.0550
.0595
.0635
.0670
.0700
.0730
.0760
.0785
.0810
.0820
.0860
.0890
.0935
.0960
.0980
.0995
.1015
.1040
.1065
.1100
.1110
.1130
.1160
.1200
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.69
1.69
1.69
1.69
1.69
1.75
1.75
1.75
1.75
1.75
1.75
1.81
1.81
1.81
1.81
1.81
1.81
1.88
1.88
1.88
1.88
1.88
.50
.50
.50
.50
.50
.50
.50
.50
.69
.69
.69
.69
.69
.75
.75
.75
.75
.75
.75
.81
.81
.81
.81
.81
.81
.88
.88
.88
.88
.88
.088
.090
.093
.095
.103
.115
.121
.131
.140
.148
.154
.161
.168
.173
.179
.181
.190
.196
.206
.212
.216
.220
.224
.230
.235
.243
.245
.249
.256
.265
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
.008
.008
.009
.009
.010
.011
.011
.012
.013
.014
.014
.015
.016
.016
.017
.017
.018
.018
.019
.020
.020
.021
.021
.022
.022
.023
.023
.023
.024
.025
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Series CS120
•
•
•
•
135° straight flute
recommended for hole depths of 2x to 3x diameter
excellent hole quality
recommended for stainless steels, hardened materials,
and abrasive materials
d1
catalog number
decimal
size
mm
new
old
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
#30
#29
#28
#27
#26
#25
#24
#23
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
#12
#11
#10
#9
#8
#7
#6
#5
#4
#3
#2
#1
3,26
3,45
3,57
3,66
3,73
3,80
3,86
3,91
3,99
4,04
4,09
4,22
4,31
4,39
4,50
4,57
4,62
4,70
4,80
4,85
4,91
4,98
5,05
5,11
5,18
5,22
5,31
5,41
5,61
5,79
KWCD00618
KWCD00619
KWCD00620
KWCD00621
KWCD00622
KWCD00623
KWCD00624
KWCD00625
KWCD00626
KWCD00627
KWCD00628
KWCD00629
KWCD00630
KWCD00631
KWCD00632
KWCD00633
KWCD00634
KWCD00635
KWCD00636
KWCD00637
KWCD00638
KWCD00639
KWCD00640
KWCD00641
KWCD00642
KWCD00643
KWCD00644
KWCD00645
KWCD00646
KWCD00647
40513900618
40513900619
40513900620
40513900621
40513900622
40513900623
40513900624
40513900625
40513900626
40513900627
40513900628
40513900629
40513900630
40513900631
40513900632
40513900633
40513900634
40513900635
40513900636
40513900637
40513900638
40513900639
40513900640
40513900641
40513900642
40513900643
40513900644
40513900645
40513900646
40513900647
d2
l1
l2
l3
l4
l5
grade
K600
.1285
.1360
.1405
.1440
.1470
.1495
.1520
.1540
.1570
.1590
.1610
.1660
.1695
.1730
.1770
.1800
.1820
.1850
.1890
.1910
.1935
.1960
.1990
.2010
.2040
.2055
.2090
.2130
.2210
.2280
1.94
1.94
1.94
2.06
2.06
2.06
2.06
2.06
2.13
2.13
2.13
2.13
2.13
2.19
2.19
2.19
2.19
2.19
2.19
2.19
2.19
2.25
2.25
2.25
2.38
2.38
2.38
2.38
2.44
2.44
.94
.94
.94
1.00
1.00
1.00
1.00
1.00
1.06
1.06
1.06
1.06
1.06
1.13
1.13
1.13
1.13
1.13
1.13
1.13
1.13
1.19
1.19
1.19
1.25
1.25
1.25
1.25
1.31
1.31
.284
.300
.310
.318
.324
.330
.335
.340
.347
.351
.355
.366
.374
.382
.391
.397
.402
.408
.417
.422
.427
.433
.439
.444
.450
.454
.461
.470
.488
.503
1.00
1.00
1.00
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.06
1.13
1.13
1.13
1.13
1.13
1.13
.027
.028
.029
.030
.030
.031
.031
.032
.033
.033
.033
.034
.035
.036
.037
.037
.038
.038
.039
.040
.040
.041
.041
.042
.042
.043
.043
.044
.046
.047
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
237
®
Series CN130
• 118° included point angle
• used for spot drilling and very shallow holes
• recommended for thin material thickness
d1
catalog number
d2
l1
l2
l3
l4
l5
grade
K600
.0313
.0625
.0938
.1250
.1563
.1875
.2188
.2500
.3125
.3438
.3750
.4375
.5000
1.25
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
.19
.31
.38
.44
.47
.56
.59
.69
.88
.94
1.00
1.06
1.13
.063
.125
.188
.250
.313
.375
.438
.500
.625
.688
.750
.875
1.000
1.06
1.19
1.13
1.06
1.53
1.44
1.41
1.31
1.63
.156
1.50
1.44
1.38
.009
.019
.028
.038
.047
.056
.066
.075
.094
.103
.113
.131
.150
■
■
■
■
■
■
■
■
■
■
■
■
■
catalog number
d2
l1
l2
l3
l4
l5
grade
K600
CDC094DS1
CDC078DS1
CDC109DS1
CDC125DS1
CDC188DS1
CDC218DS1
.1250
.1875
.2500
.3125
.4375
.5000
1.50
2.00
2.00
2.13
2.75
3.00
.38
.50
.69
.75
1.00
1.06
.075
.106
.138
.153
.216
.247
1.13
1.50
1.31
1.38
1.75
1.94
.028
.047
.066
.075
.113
.131
■
■
■
■
■
■
decimal
size
mm
new
old
.0313
.0625
.0938
.1250
.1563
.1875
.2188
.2500
.3125
.3438
.3750
.4375
.5000
1/32
1/16
3/32
1/8
5/32
3/16
7/32
1/4
5/16
11/32
3/8
7/16
1/2
0,79
1,59
2,38
3,18
3,97
4,76
5,56
6,35
7,94
8,73
9,53
11,11
12,70
KWCD00648
KWCD00649
KWCD00650
KWCD00651
KWCD00652
KWCD00653
KWCD00654
KWCD00655
KWCD00657
KWCD00658
KWCD00659
KWCD00661
KWCD00663
40513900648
40513900649
40513900650
40513900651
40513900652
40513900653
40513900654
40513900655
40513900657
40513900658
40513900659
40513900661
40513900663
Combined Drill and Countersink
• 118° point angle
• 60° included angle
• used in high-production environments requiring
tool strength
• recommended for most materials
d1
decimal
size
mm
.0469
.0781
.1094
.1250
.1875
.2188
3/64
5/64
7/64
1/8
3/16
7/32
1,19
1,98
2,78
3,18
4,76
5,56
238
High-Performance Taps
page
K-SS . . . . . . . . . . . . . . . . . . . . . . .
K-SS spiral point plug . . . . . . . . . . . . . . . . . .
K-SS spiral flute, modified bottom . . . . . . . . .
K-SS spiral flute, full bottom . . . . . . . . . . . . . . .
K-SS spiral flute pipe . . . . . . . . . . . . . . . . . . . . . .
K-NI
240-245
240
242
244
245
246-248
K-NI spiral point plug . . . . . . . . . . . . . . . . . . . . . . . . .
K-NI spiral flute, modified bottom . . . . . . . . . . . . . . .
K-NI spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . .
K-NI STI (for screw thread inserts). . . . . .
246
247
248
249-251
K-NI STI spiral point plug . . . . . . . . . . . . . . . . . . . . . . . . .
K-NI STI spiral flute, modified bottom . . . . . . . . . . . . . . .
K-NI STI spiral flute, full bottom . . . . . . . . . . . . . . . . . . . .
249
250
251
K-MS Mold Taps. . . . . . . . . . . . . . . . . . . . . . .
252
K-AA Straight Flute Taps . . . . . . . . . . . . . . . .
253-254
K-TI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
255-257
K-TI LHS/RHC spiral flute plug. . . . . . . . . . . . . . . . . . . . . . .
K-TI RH spiral flute, modified bottom . . . . . . . . . . . . . . . . .
K-TI RH spiral flute, full bottom . . . . . . . . . . . . . . . . . . . . . .
255
256
257
Decimal Equivalent Chart. . . . . . . . . . . . . . . .
258
Need technical
assistance?
Call our
Tech Hotline!
800/835-3668
239
®
K-SS Spiral Point Plug
Metric Sizes
M3 to M6 (12 per package)
•
•
•
•
•
•
Recommended Applications:
- low-carbon steels (<0.3% C) (<275 HB)
- plain-carbon, alloy, and tool steels (<275 HB) (<29 HRC)
- ferritic, martensitic, and PH stainless steels
(<275 HB) (<29 HRC)
- austenitic stainless steels (135-275 HB) (<28 HRC)
For more technical information, see pages 680-702 of Holemaking
Catalog 0070 (A00-2).
high-vanadium premium steel
surface-treated oxide
for through-hole tapping
plug chamfer: 4-5 pitches
neck design for CNC equipment
suitable for UNJ aerospace internal threading applications
tap size and pitch
(mm)
number of flutes
*pitch diameter limit
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
M5 x 0,8
M6 x 1
3
3
3
3
3
D3
D4
D4
D4
D5
length of thread
plug chamfer
length of neck
overall length
UIC #
.251
.274
.297
.344
.409
1 15/16
2
2 1/8
2 3/8
2 1/2
40510200238
40510200239
40510200240
40510200241
40510200242
.374
.413
.453
.531
.591
*Metric “D” limits suitable for ISO 6H tolerance class.
NOTE: For dimensions other than those shown, see page 686 of Holemaking Catalog 0070 (A00-2).
Machine Screw and Fractional Sizes
#2 to 1/4" (2 per package) • 5/16" to 3/8" (6 per package)
threads per
inch
tap
size
number length
of
of
flutes thread
length
of
neck
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
2
3
4
4
5
56
48
40
—
40
—
—
—
48
—
2
2
2
2
3
.256
.295
.335
.335
.374
.181
.205
.227
.227
.251
6
6
8
8
32
—
32
—
—
40
—
36
3
3
3
3
.413
.413
.453
.453
10
10
12
12
24
—
24
—
—
32
—
28
3
3
3
3
1/4
1/4
5/16
5/16
20
—
18
—
—
28
—
24
3/8
3/8
16
—
—
24
UIC #
pitch diameter limits
H2
H3
H4
H5
H6
H7
1 3/4
1 13/16
1 7/8
1 7/8
1 15/16
40510200001
40510200004
40510200005
40510200010
40510200012
40510200002
—
40510200006
—
—
40510200003
—
40510200007
40510200011
—
—
—
40510200008
—
—
—
—
40510200009
—
—
—
—
—
—
—
.274
.274
.297
.297
2
2
2 1/8
2 1/8
40510200013
40510200019
40510200021
40510200027
40510200014
40510200020
40510200022
—
40510200015
—
40510200023
—
40510200016
—
40510200024
—
40510200017
—
40510200025
—
40510200018
—
40510200026
—
.531
.531
.571
.571
.344
.344
.366
.366
2 3/8
2 3/8
2 3/8
2 3/8
—
40510200033
—
—
40510200028
40510200034
40510200039
40510200040
40510200029
40510200035
—
—
40510200030
40510200036
—
—
40510200031
40510200037
—
—
40510200032
40510200038
—
—
3
3
3
3
.591
.591
.669
.669
.409
.409
.456
.456
2 1/2
2 1/2
2 23/32
2 23/32
40510200041
40510200045
—
—
40510200042
40510200046
40510200051
40510200054
—
40510200047
—
40510200055
40510200043
40510200048
40510200052
40510200056
—
40510200049
—
40510200057
40510200044
40510200050
40510200053
40510200058
3
3
.748
.748
.502
.502
2 15/16
2 15/16
—
—
40510200059
40510200062
—
40510200063
40510200060
40510200064
—
40510200065
40510200061
40510200066
240
K-SS Spiral Point Plug
•
•
•
•
•
•
TiN coated
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
threads per inch
tap
size
plug chamfer
UIC #
number
of
flutes
length
of
thread
length
of
neck
overall length
NC
UNC
UNJC
NF
UNF
UNJF
4
5
6
8
40
40
32
32
—
—
—
—
2
3
3
3
.335
.374
.413
.453
.227
.251
.274
.297
1 7/8
1 15/16
2
2 1/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.531
.531
.591
.591
.344
.344
.409
.456
2
2
2
2
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.669
.669
.748
.748
.456
.456
.502
.502
2
2
2
2
H2
H3
H4
40510200729
40510200730
—
—
—
—
40510200731
40510200732
—
—
—
—
3/8
3/8
1/2
1/2
—
—
—
—
40510200733
40510200756
40510200757
40510200758
—
—
—
—
23/32
23/32
15/16
15/16
—
—
—
—
40510200759
40510200760
40510200761
40510200762
—
—
—
—
241
®
K-SS Spiral Flute, Modified Bottom
Metric Sizes
•
•
•
•
•
•
for blind-hole tapping
modified bottom chamfer: 2 1/2 - 3 1/2 pitches
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
modified bottom chamfer
tap size and pitch
(mm)
number of flutes
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
M5 x 0,8
M6 x 1
3
3
3
3
3
D3
D4
D4
D4
D5
length of thread
length of neck
overall length
UIC #
.428
.411
.474
.521
.567
1 15/16
2
2 1/8
2 3/8
2 1/2
40510200256
40510200258
40510200260
40510200262
40510200264
.197
.276
.276
.354
.433
threads per
inch
tap
size
2
3
4
4
5
6
6
8
10
10
12
12
1/4
1/4
5/16
5/16
3/8
3/8
NC
UNC
UNJC
NF
UNF
UNJF
56
48
40
—
40
32
—
32
24
—
24
—
20
—
18
—
16
—
—
—
—
48
—
—
40
—
—
32
—
28
—
28
—
24
—
24
number length
of
of
flutes thread
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
.157
.197
.236
.236
.236
.276
.276
.276
.354
.276
.354
.276
.433
.354
.472
.394
.551
.394
length
of
neck
overall
length
.280
.303
.326
.326
.389
.411
.411
.474
.521
.599
.583
.661
.567
.646
.653
.731
.699
.856
1 3/4
1 13/16
1 7/8
1 7/8
2
2
2
2 1/8
2 3/8
2 3/8
2 3/8
2 3/8
2 1/2
2 1/2
2 23/32
2 23/32
2 15/16
2 15/16
UIC #
H2
H3
H4
H5
H6
H7
40510200096
40510200097
40510200098
40510200106
40510200108
40510200110
40510200118
40510200123
40510200132
40510200139
—
—
40510200149
40510200155
—
—
—
—
—
—
40510200100
—
—
40510200112
40510200121
40510200125
40510200133
40510200140
40510200147
40510200148
40510200150
40510200156
40510200163
40510200168
40510200175
40510200181
—
—
40510200102
—
—
40510200114
—
40510200127
40510200135
40510200142
—
—
—
40510200158
—
40510200170
—
40510200183
—
—
40510200103
—
—
40510200115
—
40510200128
40510200136
40510200143
—
—
40510200152
40510200159
40510200165
40510200171
40510200177
40510200185
—
—
40510200105
—
—
—
—
40510200130
—
40510200145
—
—
—
40510200161
—
40510200173
—
40510200187
—
—
—
—
—
40510200117
—
40510200131
40510200138
40510200146
—
—
40510200154
40510200162
40510200167
40510200174
40510200179
40510200188
242
K-SS Spiral Flute, Modified Bottom
•
•
•
•
•
•
TiN coated
modified bottom chamfer: 2 1/2 - 3 1/2 pitches
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
threads per inch
tap
size
4
5
6
8
10
10
1/4
1/4
5/16
5/16
3/8
3/8
NC
UNC
UNJC
NF
UNF
UNJF
40
40
32
32
24
—
20
—
18
—
16
–
—
—
—
—
—
32
—
28
—
24
—
24
number
of
flutes
length
of
thread
length
of
neck
2
3
3
3
3
3
3
3
3
3
3
3
.236
.236
.276
.276
.354
.276
.433
.354
.472
.394
.551
.394
.326
.389
.411
.411
.521
.599
.567
.646
.653
.731
.699
.856
UIC #
overall length
1
1
2
2
2
2
2
2
2
2
2
2
7/8
15/16
1/8
3/8
3/8
1/2
1/2
23/32
23/32
15/16
15/16
H2
H3
H4
40510200776
40510200777
—
—
—
—
—
—
—
—
—
—
—
—
40510200778
40510200779
40510200780
40510200781
40510200782
40510200783
40510200784
40510200785
40510200786
40510200787
—
—
—
—
—
—
—
—
—
—
—
—
243
®
K-SS Spiral Flute, Full Bottom
Metric Sizes
•
•
•
•
•
•
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
full bottom chamfer: 1-2 pitches
full bottom chamfer
tap size and pitch
(mm)
number of flutes
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
M5 x 0,8
M6 x 1
3
3
3
3
3
D3
D4
D4
D4
D5
length of thread
length of neck
overall length
UIC #
.428
.411
.474
.521
.567
1 15/16
2
2 1/8
2 3/8
2 1/2
40510200257
40510200259
40510200261
40510200263
40510200265
.197
.276
.276
.354
.433
threads per
inch
tap
size
4
4
5
6
6
8
10
10
12
12
1/4
1/4
5/16
5/16
3/8
3/8
NC
UNC
UNJC
NF
UNF
UNJF
40
—
40
32
—
32
24
—
24
—
20
—
18
—
16
—
—
48
—
—
40
—
—
32
—
28
—
28
—
24
—
24
number length
of
of
flutes thread
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
.236
.236
.236
.276
.276
.276
.354
.276
.354
.276
.433
.354
.472
.394
.551
.394
length
of
neck
overall
length
.326
.326
.389
.411
.411
.474
.521
.599
.583
.661
.567
.646
.653
.731
.699
.856
1 7/8
1 7/8
2
2
2
2 1/8
2 3/8
2 3/8
2 3/8
2 3/8
2 1/2
2 1/2
2 23/32
2 23/32
2 15/16
2 15/16
UIC #
H2
H3
H4
H5
H6
H7
40510200099
40510200107
40510200109
40510200111
40510200119
40510200124
—
—
—
—
—
—
—
—
—
—
40510200101
—
—
40510200113
40510200122
40510200126
40510200134
40510200141
—
—
40510200151
40510200157
40510200164
40510200169
40510200176
40510200182
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
40510200184
40510200104
—
—
40510200116
—
40510200129
40510200137
40510200144
—
—
40510200153
40510200160
40510200166
40510200172
40510200178
40510200186
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
40510200180
—
244
K-SS Spiral Flute Pipe
Fractional Sizes
1/16" to 1/4" (12 per package) • 3/8" (6 per package)
•
•
•
•
NPT and NPTF pipe tap, Dry Seal taper
chamfer: 2 1/2 - 3 1/2 pitches
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
UIC #
nominal size
1/16
1/8**
1/8
1/4
threads per inch
27
27
27
18
NPT
NPT
NPT
NPT
number of flutes
4
4
4
4
length of thread
11/16
3/4
3/4
1 1/16
overall length
2
2
2
2
1/8
1/8
1/8
7/16
NPT
NPTF
40510200838
40510200839
40510200840
40510200841
40510200855
40510200856
40510200859
40510200860
*The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4" per foot.
**Large shank is .4375" diameter.
K-SS Spiral Flute Pipe
Fractional Sizes
1/16" to 1/4" (12 per package) • 3/8" (6 per package)
•
•
•
•
(<275 HB) (<29 HRC)
Catalog 0070 (A00-2).
TiN coated
NPT and NPTF pipe tap, Dry Seal taper
chamfer: 2 1/2 - 3 1/2 pitches
UIC #
nominal size
threads per inch
number of flutes
length of thread
1/16
1/8*
1/8
1/4
27
27
27
18
4
4
4
4
.688
.750
.750
1.063
*Large shank is .4375" diameter.
overall length
2
2
2
2
1/8
1/8
1/8
7/8
NPT
NPTF
40510200993
40510200994
40510200995
40510200996
40510201001
40510201002
40510201003
40510201004
245
®
K-NI Spiral Point Plug
Metric Sizes
M2,5 to M6 (12 per package)
- plain-carbon, alloy, and tool steels
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
- nickel-base, heat-resistant alloys
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
• special cobalt, high-vanadium premium steel
• surface-treated oxide over nitride
• for through-hole tapping
• plug chamfer: 4-5 pitches
• neck design for CNC equipment
• suitable for UNJ aerospace internal threading applications
plug chamfer
tap size and pitch
(mm)
number of flutes
length of thread
length of neck
overall length
UIC #
M2.5 x 0,45
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
2
3
3
3
D3
D3
D4
D4
.500
.313
.375
.375
.500
.625
.688
.750
1 13/16
1.9375
2
2.125
40510201034
40510201035
40510201036
40510201037
M5 x 0,8
M6 x 1
3
3
D4
D5
.500
.625
.875
1.000
2.375
2.5
40510201038
40510201039
threads per
inch
number
of
flutes
length
of
thread
length
of
neck
overall
length
—
—
48
—
2
2
2
3
.256
.335
.335
.374
.181
.227
.227
.251
32
—
32
24
—
—
40
—
—
32
3
3
3
3
3
.413
.413
.453
.531
.531
1/4
1/4
5/16
5/16
20
—
18
—
—
28
—
24
3
3
3
3
3/8
3/8
16
—
—
24
3
3
tap
size
NC
UNC
UNJC
NF
UNF
UNJF
2
4
4
5
56
40
—
40
6
6
8
10
10
UIC #
H2
H3
H4
H5
H6
H7
1 3/4
1 7/8
1 7/8
1 5/16
40510200291
40510200292
40510200295
40510200296
—
40510200293
—
—
—
40510200294
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.274
.274
.297
.344
.344
2
2
2 1/8
2 3/8
2 3/8
40510200297
40510200301
40510200302
—
40510200312
40510200298
—
40510200303
40510200308
40510200313
—
—
40510200304
40510200309
40510200314
40510200299
—
40510200305
40510200310
40510200315
—
—
40510200306
—
40510200316
40510200300
—
40510200307
40510200311
40510200317
.591
.591
.669
.669
.409
.409
.456
.456
2 1/2
2 1/2
2 23/32
2 23/32
—
—
—
—
40510200318
40510200321
40510200326
40510200329
—
40510200322
—
40510200330
40510200319
40510200323
40510200327
40510200331
—
40510200324
—
40510200332
40510200320
40510200325
40510200328
40510200333
.748
.748
.502
.502
2 15/16
2 15/16
—
—
40510200334
40510200337
—
40510200338
40510200335
40510200339
—
40510200340
40510200336
40510200341
246
K-NI Spiral Flute, Modified Bottom
Metric Sizes
•
•
•
•
•
•
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
special cobalt, high-vanadium premium steel
surface-treated oxide over nitride
modified bottom chamfer: 3-4 pitches
tap size and pitch
(mm)
number of flutes
length of thread
length of neck
overall length
UIC #
M2.5 x 0,45
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
2
3
3
3
D3
D3
D4
D4
.500
.313
.375
.375
.500
.625
.688
.750
1 13/16
1 15/16
2
2 1/8
40510201060
40510201061
40510201062
40510201063
M5 x 0,8
M6 x 1
3
3
D4
D5
.500
.625
.875
1.000
2 3/8
2 1/2
40510201064
40510201065
threads per
inch
tap
size
NC
UNC
UNJC
NF
UNF
UNJF
2
3
4
4
5
56
48
40
—
40
—
6
6
8
10
10
number length
of
of
flutes thread
length
of
neck
UIC #
overall
length
3/4
13/16
7/8
7/8
15/16
H2
H3
H4
H5
H6
H7
40510200356
40510200357
40510200358
40510200366
40510200368
—
—
40510200361
—
—
—
—
40510200363
—
—
—
—
40510200364
—
—
—
—
—
—
—
—
—
—
—
—
40510200370
40510200377
40510200379
—
40510200394
40510200372
—
40510200381
40510200388
40510200395
—
—
40510200383
40510200390
40510200397
40510200374
—
40510200384
40510200391
40510200398
—
—
40510200386
—
40510200400
40510200376
—
40510200387
40510200393
40510200401
—
48
—
3
3
3
3
3
.157
.197
.236
.236
.236
.280
.303
.326
.326
.389
1
1
1
1
1
32
—
32
24
—
—
40
—
—
32
3
3
3
3
3
.276
.276
.276
.354
.276
.411
.411
.474
.521
.599
2
2
2 1/8
2 3/8
2 3/8
1/4
1/4
5/16
5/16
20
—
18
—
—
28
—
24
3
3
3
3
.433
.354
.472
.394
.567
.646
.653
.731
2
2
2
2
1/2
1/2
23/32
23/32
—
—
—
—
40510200402
40510200407
40510200415
40510200420
—
40510200409
—
40510200422
40510200404
40510200411
40510200417
40510200424
—
40510200413
—
40510200426
40510200406
40510200414
40510200419
40510200427
3/8
3/8
16
—
—
24
3
3
.551
.394
.699
.856
2 15/16
2 15/16
—
—
40510200428
40510200433
—
40510200435
40510200430
40510200437
—
40510200439
40510200432
40510200440
247
®
K-NI Spiral Flute, Full Bottom
•
•
•
•
•
•
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
suitable for UNJ internal threading aerospace applications
threads per
inch
tap
size
number
of
flutes
length
of
thread
length
of
neck
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
4
5
40
—
40
—
48
—
3
3
3
.236
.236
.236
.326
.326
.389
1 7/8
1 7/8
1 15/16
6
6
8
32
—
32
—
40
—
3
3
3
.276
.276
.276
.411
.411
.474
2
2
2 1/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.354
.276
.433
.354
.521
.599
.567
.646
2
2
2
2
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.472
.394
.551
.394
.653
.731
.699
.856
UIC #
H2
H3
H4
H5
40510200359
40510200367
40510200369
40510200362
—
—
—
—
—
40510200365
—
—
40510200371
40510200378
40510200380
40510200373
—
40510200382
—
—
—
40510200375
—
40510200385
3/8
3/8
1/2
1/2
—
—
—
—
40510200389
40510200396
40510200403
40510200408
—
—
—
40510200410
40510200392
40510200399
40510200405
40510200412
2 23/32
2 23/32
2 15/16
2 15/16
—
—
—
—
40510200416
40510200421
40510200429
40510200434
—
40510200423
—
40510200436
40510200418
40510200425
40510200431
40510200438
248
full bottom chamfer
K-NI STI Spiral Point Plug
Machine Screw and Fractional Sizes for Screw Thread Inserts
•
•
•
•
•
•
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
threads per
inch
tap
size
number
of
flutes
length
of
thread
length
of
neck
UIC #
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
6
8
40
32
32
—
—
—
2
3
3
.413
.531
.571
.274
.344
.366
2
2 3/8
2 3/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.591
.591
.669
.669
.409
.409
.456
.456
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.748
.748
.984
.866
.502
.502
—
—
plug chamfer
H1
H2
H3
H4
H5
40510200466
—
—
40510200467
40510200469
40510200472
40510200468
40510200470
40510200473
—
—
—
—
40510200471
40510200474
2 1/2
2 1/2
2 23/32
2 23/32
—
—
—
—
40510200475
40510200478
40510200481
40510200484
40510200476
40510200479
40510200482
40510200485
—
—
—
—
40510200477
40510200480
40510200483
40510200486
2 15/16
2 15/16
3 3/8
3 5/32
—
—
—
—
—
40510200490
—
40510200496
40510200487
40510200491
40510200493
40510200497
40510200488
—
40510200494
—
40510200489
40510200492
40510200495
40510200498
249
®
K-NI STI Spiral Flute, Modified Bottom
•
•
•
•
•
•
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
modified bottom chamfer: 3-4 pitches
threads per
inch
tap
size
number length
of
of
flutes thread
length
of
neck
UIC #
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
6
8
40
32
32
—
—
—
2
3
3
.276
.354
.354
.411
.521
.583
2
2 3/8
2 3/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.433
.354
.472
.394
.567
.646
.653
.731
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.551
.394
.630
.472
.699
.856
1.417
1.378
H1
H2
H3
H4
H5
40510200507
—
—
40510200508
40510200512
40510200518
40510200510
40510200514
40510200520
—
—
—
—
40510200516
40510200522
2 1/2
2 1/2
2 23/32
2 23/32
—
—
—
—
40510200524
40510200530
40510200535
40510200540
40510200526
40510200531
40510200536
40510200541
—
—
—
—
40510200528
40510200533
40510200538
40510200543
2 15/16
2 15/16
3 3/8
3 5/32
—
—
—
—
—
40510200550
—
40510200560
40510200545
40510200551
40510200555
40510200561
40510200547
—
40510200557
—
40510200548
40510200553
40510200558
40510200563
250
K-NI STI Spiral Flute, Full Bottom
•
•
•
•
•
•
(275-340 HB) (29-36 HRC)
(275-340 HB) (29-36 HRC)
(140-475 HB) (≤ 48 HRC)
Catalog 0070 (A00-2).
threads per
inch
tap
size
number length
of
of
flutes thread
length
of
neck
NC
UNC
UNJC
NF
UNF
UNJF
4
6
8
40
32
32
—
—
—
2
3
3
.276
.354
.354
.411
.521
.583
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.433
.354
.472
.394
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.551
.394
.630
.472
full bottom chamfer
UIC #
overall
length
H1
H2
H3
H4
H5
2
2 3/8
2 3/8
—
—
—
40510200509
40510200513
40510200519
40510200511
40510200515
40510200521
—
—
—
—
40510200517
40510200523
.567
.646
.653
.731
2 1/2
2 1/2
2 23/32
2 23/32
—
—
—
—
40510200525
—
—
—
40510200527
40510200532
40510200537
40510200542
—
—
—
—
40510200529
40510200534
40510200539
40510200544
.699
.856
1.417
1.378
2 15/16
2 15/16
3 3/8
3 5/32
—
—
—
—
—
—
—
—
40510200546
40510200552
40510200556
40510200562
—
—
—
—
40510200549
40510200554
40510200559
40510200564
251
®
K-MS Mold Hand Taps
• special cobalt alloy, high-speed steel
• bright finish
• for through-hole and blind-hole tapping
• straight flute design
• suitable for UNJ internal threading aerospace applications
- hardened steels and irons (36-45 HRC)
Catalog 0070 (A00-2).
threads per inch
tap
size
NC
UNC
UNJC
NF
UNF
UNJF
number
of
flutes
UIC #
H2
H3
H4
4
5
6
8
40
40
32
32
—
—
—
—
3
3
3
3
40510200802
40510200805
—
—
—
—
40510200808
40510200809
—
—
—
—
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
—
—
—
—
40510200811
40510200814
40510200819
40510200820
—
—
—
—
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
4
4
4
4
—
—
—
—
40510200821
40510200822
40510200823
40510200824
—
—
—
—
252
plug chamfer
K-AA Straight Flute Plug
Metric Sizes
• ultra-fine grain carbide
• bright finish
• straight 3-flute design
- cast aluminum
- high silicon aluminum alloys
Catalog 0070 (A00-2).
tap size and pitch
(mm)
M3
M4
M5
M6
x
x
x
x
0,5
0,7
0,8
1,0
number of flutes
length of thread
3
3
3
3
D3
D4
D4
D5
.625
.750
.875
1.000
plug chamfer
overall length
1
2
2
2
UIC #
15/16
1/8
3/8
1/2
40510201104
40510201106
40510201108
40510201110
threads per inch
tap
size
number of
flutes
length of
thread
UIC #
NC
UNC
UNJC
NF
UNF
UNJF
5
6
8
10
10
40
32
32
24
—
—
—
—
—
32
3
3
3
3
3
.625
.688
.750
.875
.875
1
2
2
2
2
15/16
1/4
1/4
1/4
1/4
20
20
—
—
—
—
28
28
3
3
3
3
1.000
1.000
1.000
1.000
5/16
5/16
5/16
5/16
18
18
—
—
—
—
24
24
3
3
3
3
3/8
3/8
3/8
3/8
16
16
—
—
—
—
24
24
3
3
3
3
overall length
H3
H5
1/8
3/8
3/8
40510201178
40510201180
40510201182
40510201184
40510201186
—
—
—
—
—
2
2
2
2
1/2
1/2
1/2
1/2
40510201188
—
40510201190
—
—
40510201208
—
40510201210
1.125
1.125
1.125
1.125
2
2
2
2
23/32
23/32
23/32
23/32
40510201192
—
40510201194
—
—
40510201212
—
40510201214
1.250
1.250
1.250
1.250
2
2
2
2
15/16
15/16
15/16
15/16
40510201196
—
40510201198
—
—
40510201216
—
40510201218
253
®
K-AA Straight Flute, Full Bottom
Metric Sizes
• ultra-fine grain carbide
• bright finish
• for blind-hole tapping
• full bottom chamfer: 1-2 pitches
• straight 3-flute design
- cast aluminum
- high silicon aluminum alloys
Catalog 0070 (A00-2).
tap size and pitch
(mm)
M3
M4
M5
M6
x
x
x
x
0,5
0,7
0,8
1,0
number of flutes
length of thread
3
3
3
3
D3
D4
D4
D5
.625
.750
.875
1.000
full bottom chamfer
overall length
1
2
2
2
UIC #
15/16
1/8
3/8
1/2
40510201105
40510201107
40510201109
40510201111
threads per inch
tap
size
number of
flutes
length of
thread
NC
UNC
UNJC
NF
UNF
UNJF
5
6
8
10
10
40
32
32
24
—
—
—
—
—
32
3
3
3
3
3
.625
.688
.750
.875
.875
1
2
2
2
2
15/16
1/4
1/4
1/4
1/4
20
20
—
—
—
—
28
28
3
3
3
3
1.000
1.000
1.000
1.000
5/16
5/16
5/16
5/16
18
18
—
—
—
—
24
24
3
3
3
3
3/8
3/8
3/8
3/8
16
16
—
—
—
—
24
24
3
3
3
3
overall length
H3
H5
1/8
3/8
3/8
40510201179
40510201181
40510201183
40510201185
40510201187
—
—
—
—
—
2
2
2
2
1/2
1/2
1/2
1/2
40510201189
—
40510201191
—
—
40510201209
—
40510201211
1.125
1.125
1.125
1.125
2
2
2
2
23/32
23/32
23/32
23/32
40510201193
—
40510201195
—
—
40510201213
—
40510201215
1.250
1.250
1.250
1.250
2
2
2
2
15/16
15/16
15/16
15/16
40510201197
—
40510201199
——
—
40510201217
—
40510201219
254
UIC #
K-TI LHS/RHC Spiral Flute Plug
Metric Sizes
• left-hand spiral for tapping right-hand threads
• surface-treated nitride
- titanium and titanium alloys (110-450 HB) (≤ 48 HRC)
- free-machining and low-silicon aluminum alloys
(hypoeutectic <12.2% Si)
- copper alloys, magnesium
- plastic
Catalog 0070 (A00-2).
plug chamfer
tap size and pitch
(mm)
number of flutes
length of thread
length of neck
overall length
UIC #
M2.5 x 0,45
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
2
3
3
3
D3
D3
D4
D4
.500
.313
.375
.375
.500
.625
.688
.750
1 13/16
1 15/16
2
2 1/8
40510201021
40510201022
40510201023
40510201024
M5 x 0,8
M6 x 1
3
3
D4
D5
.500
.625
.875
1.000
2 3/8
2 1/2
40510201025
40510201026
threads per
inch
tap
size
number
of
flutes
length
of
thread
length
of
neck
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
5
6
8
40
40
32
32
—
—
—
—
3
3
3
3
.335
.374
.413
.453
.227
.251
.274
.297
1 7/8
1 15/16
2
2 1/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.531
.531
.591
.591
.344
.344
.409
.409
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.669
.669
.748
.748
.456
.456
.502
.502
UIC #
H2
H3
H4
H5
40510200581
40510200582
—
—
—
—
40510200583
40510200585
—
—
—
—
—
—
40510200584
40510200586
2 3/8
2 3/8
2 1/2
2 1/2
—
—
—
—
40510200587
40510200589
40510200591
40510200593
—
—
—
—
40510200588
40510200590
40510200592
40510200594
2 23/32
2 23/32
2 15/16
2 15/16
—
—
—
—
40510200595
40510200597
40510200599
40510200601
—
—
—
—
40510200596
40510200598
40510200600
40510200602
255
®
K-TI RHS Spiral Flute, Modified Bottom
Metric Sizes
- plastic
Catalog 0070 (A00-2).
• surface-treated nitride
• for blind-hole tapping
• modified bottom chamfer: 3-4 pitches
tap size and pitch
(mm)
number of flutes
length of thread
length of neck
overall length
UIC #
M2.5 x 0,45
M3 x 0,5
M3.5 x 0,6
M4 x 0,7
2
3
3
3
D3
D3
D4
D4
.500
.313
.375
.375
.500
.625
.688
.750
1 13/16
1 15/16
2
2 1/8
40510201047
40510201048
40510201049
40510201050
M5 x 0,8
M6 x 1
3
3
D4
D5
.500
.625
.875
1.000
2 3/8
2 1/2
40510201051
40510201052
threads per
inch
tap
size
number
of
flutes
length
of
thread
length
of
neck
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
5
6
8
40
40
32
32
—
—
—
—
3
3
3
3
.236
.236
.276
.276
.326
.389
.411
.474
1 7/8
1 15/16
2
2 1/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.354
.276
.433
.354
.521
.599
.567
.646
2
2
2
2
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.472
.394
.551
.394
.653
.731
.699
.856
2
2
2
2
UIC #
H2
H3
H4
H5
40510200611
—
—
—
—
40510200614
40510200615
40510200618
40510200613
—
—
—
—
—
40510200617
40510200620
3/8
3/8
1/2
1/2
—
—
—
—
40510200621
40510200623
40510200626
40510200630
—
—
—
—
—
40510200625
40510200628
40510200633
23/32
23/32
15/16
15/16
—
—
—
—
40510200634
40510200638
40510200641
40510200645
—
—
—
—
40510200636
40510200640
40510200643
40510200647
256
K-TI RHS Spiral Flute, Full Bottom
•
•
•
•
•
•
surface-treated nitride
suitable for UNJ internal threading aerospace applications
- plastic
Catalog 0070 (A00-2).
full bottom chamfer
threads per
inch
tap
size
number
of
flutes
length
of
thread
length
of
neck
overall
length
NC
UNC
UNJC
NF
UNF
UNJF
4
5
6
8
40
40
32
32
—
—
—
—
3
3
3
3
.236
.236
.276
.276
.326
.389
.411
.474
1 7/8
1 15/16
2
2 1/8
10
10
1/4
1/4
24
—
20
—
—
32
—
28
3
3
3
3
.354
.276
.433
.354
.521
.599
.567
.646
2
2
2
2
5/16
5/16
3/8
3/8
18
—
16
—
—
24
—
24
3
3
3
3
.472
.394
.551
.394
.653
.731
.699
.856
2
2
2
2
UIC #
H2
H3
H4
H5
—
—
—
—
—
—
40510200616
40510200619
40510200612
—
—
—
—
—
40510200617
—
3/8
3/8
1/2
1/2
—
—
—
—
40510200622
40510200624
40510200627
40510200631
—
—
—
—
—
40510200625
40510200629
—
23/32
23/32
15/16
15/16
—
—
—
—
40510200635
40510200639
40510200642
40510200646
—
—
—
—
40510200637
—
40510200644
—
257
®
Decimal Equivalents of Fraction, Number, Letter, and Metric Sizes
258
sizes
decimal inches
sizes
decimal inches
sizes
decimal inches
sizes
decimal inches
sizes
decimal inches
97
0,15 mm
96
0,16 mm
95
0,17 mm
94
0,18 mm
93
0,19 mm
92
0,2 mm
91
0,21 mm
90
0,22 mm
89
0,23 mm
0,24 mm
88
0,25 mm
87
0,26 mm
86
0,27 mm
85
0,28 mm
0,29 mm
84
0,3 mm
83
82
0,32 mm
81
0,34 mm
80
0,35 mm
0,36 mm
79
0,38 mm
1/64
0,4 mm
78
0,42 mm
0,44 mm
0,45 mm
77
0,46 mm
0,48 mm
0,5 mm
76
75
0,55 mm
74
0,6 mm
73
72
0,65 mm
71
0,7 mm
70
69
0,75 mm
68
1/32
0,8 mm
67
66
0,85 mm
65
0,9 mm
64
63
0,95 mm
62
61
1 mm
60
59
1,05 mm
.0059
.0059
.0063
.0063
.0067
.0067
.0071
.0071
.0075
.0075
.0079
.0079
.0083
.0083
.0087
.0087
.0091
.0091
.0094
.0095
.0098
.0100
.0102
.0105
.0106
.0110
.0110
.0114
.0115
.0118
.0120
.0125
.0126
.0130
.0134
.0135
.0138
.0142
.0145
.0150
.0156
.0157
.0160
.0165
.0173
.0177
.0180
.0181
.0189
.0197
.0200
.0210
.0217
.0225
.0236
.0240
.0250
.0256
.0260
.0276
.0280
.0292
.0295
.0310
.0312
.0315
.0320
.0330
.0335
.0350
.0354
.0360
.0370
.0374
.0380
.0390
.0394
.0400
.0410
.0413
58
57
1,1 mm
1,15 mm
56
3/64
1,2 mm
1,25 mm
1,3 mm
55
1,35 mm
54
1,4 mm
1,45 mm
1,5 mm
53
1,55 mm
1/16
1,6 mm
52
1,65 mm
1,7 mm
51
1,75 mm
50
1,8 mm
1,85 mm
49
1,9 mm
48
1,95 mm
5/64
47
2 mm
2,05 mm
46
45
2,1 mm
2,15 mm
44
2,2 mm
2,25 mm
43
2,3 mm
2,35 mm
42
3/32
2,4 mm
41
2,45 mm
40
2,5 mm
39
38
2,6 mm
37
2,7 mm
36
2,75 mm
7/64
35
2,8 mm
34
33
2,9 mm
32
3 mm
31
3,1 mm
1/8
3,2 mm
3,25 mm
30
3,3 mm
3,4 mm
29
3,5 mm
28
9/64
3,6 mm
.0420
.0430
.0433
.0453
.0465
.0469
.0472
.0492
.0512
.0520
.0531
.0550
.0551
.0571
.0591
.0595
.0610
.0625
.0630
.0635
.0650
.0669
.0670
.0689
.0700
.0709
.0728
.0730
.0748
.0760
.0768
.0781
.0785
.0787
.0807
.0810
.0820
.0827
.0846
.0860
.0866
.0886
.0890
.0906
.0925
.0935
.0938
.0945
.0960
.0965
.0980
.0984
.0995
.1015
.1024
.1040
.1063
.1065
.1083
.1094
.1100
.1102
.1110
.1130
.1142
.1160
.1181
.1200
.1220
.1250
.1260
.1280
.1285
.1299
.1339
.1360
.1378
.1405
.1406
.1417
27
3,7 mm
26
3,75 mm
25
3,8 mm
24
3,9 mm
23
5/32
22
4 mm
21
20
4,1 mm
4,2 mm
19
4,25 mm
4,3 mm
18
11/64
17
4,4 mm
16
4,5 mm
15
4,6 mm
14
13
4,7 mm
4,75 mm
3/16
4,8 mm
12
11
4,9 mm
10
9
5 mm
8
5,1 mm
7
13/64
6
5,2 mm
5
5,25 mm
5,3 mm
4
5,4 mm
3
5,5 mm
7/32
5,6 mm
2
5,7 mm
5,75 mm
1
5,8 mm
5,9 mm
A
15/64
6 mm
B
6,1 mm
C
6,2 mm
D
6,25 mm
6,3 mm
E
1/4
6,4 mm
6,5 mm
F
6,6 mm
G
6,7 mm
17/64
6,75 mm
.1440
.1457
.1470
.1476
.1495
.1496
.1520
.1535
.1540
.1562
.1570
.1575
.1590
.1610
.1614
.1654
.1660
.1673
.1693
.1695
.1719
.1730
.1732
.1770
.1772
.1800
.1811
.1820
.1850
.1850
.1870
.1875
.1890
.1890
.1910
.1929
.1935
.1960
.1969
.1990
.2008
.2010
.2031
.2040
.2047
.2055
.2067
.2087
.2090
.2126
.2130
.2165
.2188
.2205
.2210
.2244
.2264
.2280
.2283
.2323
.2340
.2344
.2362
.2380
.2402
.2420
.2441
.2460
.2461
.2480
.2500
.2500
.2520
.2559
.2570
.2598
.2610
.2638
.2656
.2657
H
6,8 mm
6,9 mm
I
7 mm
J
7,1 mm
K
9/32
7,2 mm
7,25 mm
7,3 mm
L
7,4 mm
M
7,5 mm
19/64
7,6 mm
N
7,7 mm
7,75 mm
7,8 mm
7,9 mm
5/16
8 mm
O
8,1 mm
8,2 mm
P
8,25 mm
8,3 mm
21/64
8,4 mm
Q
8,5 mm
8,6 mm
R
8,7 mm
11/32
8,75 mm
8,8 mm
S
8,9 mm
9 mm
T
9,1 mm
23/64
9,2 mm
9,25 mm
9,3 mm
U
9,4 mm
9,5 mm
3/8
V
9,6 mm
9,7 mm
9,75 mm
9,8 mm
W
9,9 mm
25/64
10 mm
X
Y
13/32
Z
10,5 mm
27/64
11 mm
7/16
11,5 mm
29/64
15/32
12 mm
31/64
12,5 mm
1/2
13 mm
33/64
.2660
.2677
.2717
.2720
.2756
.2770
.2795
.2810
.2812
.2835
.2854
.2874
.2900
.2913
.2950
.2953
.2969
.2992
.3020
.3031
.3051
.3071
.3110
.3125
.3150
.3160
.3189
.3228
.3230
.3248
.3268
.3281
.3307
.3320
.3346
.3386
.3390
.3425
.3438
.3445
.3465
.3480
.3504
.3543
.3580
.3583
.3594
.3622
.3642
.3661
.3680
.3701
.3740
.3750
.3770
.3780
.3819
.3839
.3858
.3860
.3898
.3906
.3937
.3970
.4040
.4062
.4130
.4134
.4219
.4331
.4375
.4528
.4531
.4688
.4724
.4844
.4921
.5000
.5118
.5156
17/32
13,5 mm
35/64
14 mm
9/16
14,5 mm
37/64
15 mm
19/32
39/64
15,5 mm
5/8
16 mm
41/64
16,5 mm
21/32
17 mm
43/64
11/16
17,5 mm
45/64
18 mm
23/32
18,5 mm
47/64
19 mm
3/4
49/64
19,5 mm
25/32
20 mm
51/64
20,5 mm
13/16
21 mm
53/64
27/32
21,5 mm
55/64
22 mm
7/8
22,25 mm
22,5 mm
57/64
23 mm
29/32
59/64
23,5 mm
15/16
24 mm
61/64
24,5 mm
31/32
25 mm
63/64
1
25,5 mm
1-1/64
26 mm
1-1/32
26,5 mm
1-3/64
1-1/16
27 mm
1-5/64
27,5 mm
1-3/32
28 mm
1-7/64
28,5 mm
1-1/8
1-9/64
29 mm
1-5/32
29,5 mm
1-11/64
.5312
.5315
.5469
.5512
.5625
.5709
.5781
.5906
.5938
.6094
.6102
.6250
.6299
.6406
.6496
.6562
.6693
.6719
.6875
.6890
.7031
.7087
.7188
.7283
.7344
.7480
.7500
.7656
.7677
.7812
.7874
.7969
.8071
.8125
.8268
.8281
.8438
.8465
.8594
.8661
.8750
.8760
.8858
.8906
.9055
.9062
.9219
.9252
.9375
.9449
.9531
.9646
.9688
.9843
.9844
1.0000
1.0039
1.0156
1.0236
1.0312
1.0433
1.0469
1.0625
1.0630
1.0781
1.0827
1.0938
1.1024
1.1094
1.1220
1.1250
1.1406
1.1417
1.1562
1.1614
1.1719
End Mills
page
Application Information . . . . . . . . . . . . . .
260
Carbide End Mills
High Shear . . . . . . . . . . . . . . . . . . . . . .
261
Single End — Stub Length. . . . . . . . . . . .
261
Single End — Standard Length . . . . . . . . .
262
Double End — Stub Length . . . . . . . . . . . . . .
263
Corner Radius. . . . . . . . . . . . . . . . . . . . . . . . .
264
Ball Nose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
265
Double End Ball Nose — Stub Length. . . . . . . .
266
Metric End Mills . . . . . . . . . . . . . . . . . . . . . . . . . 267-269
259
Application Information
®
Starting Feed and Speed Guidelines for Uncoated and TiN — Solid Carbide End Mills
workpiece material
tool steel 42-50 HRC
tool steel annealed
P20 steel
die steel 32-42 HRC
low carbon steels annealed
medium carbon steels
stainless steel 400 series
cast iron 120-220 BHN
ductile iron
malleable iron
aluminum
high silicon aluminum
brass, bronze and copper alloys
magnesium
plastics
cutter
style
grade
speed
(sfm)
HEC
BNEC
SLEC
KC610M
HEC
BNEC
SLEC
CHEC
BNEC
SLEC
HEC
BNEC
SLEC
KC610M
150-250
175-275
275-500
125-200
250-400
125-300
KC610M
K600
HHSEC
K600
cutter diameter and feed rates — chip load per tooth (ipt)
1/16
1/8
1/4
3/8
.0001
.0005
.0005
.0002
.0004
.0005
.0002
.0006
.0006
.0005
.0005
.0006
.0005
.0015
.001
.0015
.001
.0015
.00075
.00175
.002
.00175
.002
.00175
400-500
300-400
.0005
.0005
.0008
.0008
.001
.001
.0015
.0015
250-600
100-300
100-400
250-500
1000+
500-900
400-800
900+
1000+
.0005
.0002
.0003
.0003
.0005
.0005
.0005
.0005
.001
.001
.0004
.0005
.0005
.001
.001
.001
.001
.0015
.002
.0008
.001
.001
.002
.002
.002
.002
.003
.0025
.0014
.0015
.002
.003
.003
.0025
.003
.0045
Starting Feed and Speed Guidelines for TiAlN — Solid Carbide End Mills
workpiece material
cutter
style
grade
speed
(sfm)
tool steel 42-50 HRC
tool steel annealed
P20 steel
die steel 32-42 HRC
die steel 52-60 HRC
low carbon steels annealed
medium carbon steels
hardened steels 48-52 HRC,
(1045, forge steel)
HEC
BNEC
SLEC
KC635M
KC631M
KC633M
HEC
BNEC
SLEC
KC635M
KC631M
KC633M
200-325
225-350
380-650
160-260
70-120
325-520
215-390
70-130
HEC
BNEC
SLEC
HEC
BNEC
SLEC
KC635M
KC631M
KC633M
KC635M
KC631M
KC633M
HHSEC
KC635M
KC631M
KC633M
HEC
BNEC
SLEC
KC635M
KC631M
KC633M
ductile iron
malleable iron
aluminum
high silicon aluminum
brass, bronze and copper alloys
magnesium
plastics
titanium alloys
high-temp. alloys (nickel base)
Monel high nickel steels
lighter radial depths of cut
Higher range of recommended surface speeds should be used.
greater radial depths of cut
Lower range of recommended surface speeds should be used.
slotting applications
Speeds should be reduced approximately 20% from the lowest
range value shown.
axial depth of cut
Recommendations are not to exceed 1 1/2 times the cutter
diameter.
260
cutter diameter and feed rates — chip load per tooth (ipt)
1/16
1/8
1/4
3/8
.0001
.0005
.0005
.0002
.0002
.0004
.0005
.0001
.0002
.0006
.0006
.0005
.0004
.0005
.0006
.0002
.0005
.0015
.001
.0015
.0005
.001
.0015
.0005
.00075
.00175
.002
.00175
.00075
.002
.00175
.00075
325-650
350-520
.0005
.0005
.0008
.0008
.001
.001
.0015
.0015
425-780
200-390
250-520
375-650
1000+
700-1170
600-1050
900+
1000+
125-200
65-130
225-325
.0005
.0002
.0003
.0003
.0005
.0005
.0005
.0005
.001
.0002
.0002
.0003
.001
.0004
.0005
.0005
.001
.001
.001
.001
.0015
.0003
.0004
.0005
.002
.0008
.001
.001
.002
.002
.002
.002
.003
.0005
.0008
.001
.0025
.0014
.0015
.002
.003
.003
.0025
.003
.0045
.00075
.0009
.0015
reduce sfm as material hardness increases
When milling steels up to 60 HRC, chip color indicates correct feed
and speed.
— A tan color indicates proper operating parameters.
— Blue or dark-color chips indicate speed should be reduced.
— White chips indicate speed should be increased.
NOTE: The above guidelines may require possible variations to achieve optimum
results.
High-Performance Solid Carbide End Mills
High Shear – Specifically Designed for Non-Ferrous Applications
right-hand spiral/right-hand cutting/center cutting
HHSEC-188-S2
HHSEC-219-S2
HHSEC-250-S2
HHSEC-281-S2
HHSEC-312-S2
HHSEC-375-S2
KC635M
HHSEC-156-S2
KC610M
HHSEC-125-S2
catalog number
K600
HHSEC-094-S2
KC635M
HHSEC-062-S2
KC610M
catalog number
4 flute
K600
2 flute
HHSEC-062-S4
HHSEC-094-S4
HHSEC-125-S4
HHSEC-156-S4
HHSEC-188-S4
HHSEC-219-S4
HHSEC-250-S4
HHSEC-281-S4
HHSEC-312-S4
HHSEC-375-S4
end mill dimensions
d1
d2
l1
l2
l3
1/16
1/8
1 1/2
3/16
1 5/16
3/32
1/8
1 1/2
3/8
1 1/8
1/8
1/8
1 1/2
3/8
1 1/8
5/32
3/16
2
9/16
1 7/16
3/16
3/16
2
9/16
1 7/16
7/32
1/4
2 1/2
5/8
1 7/8
1/4
1/4
2 1/2
3/4
1 3/4
9/32
5/16
2 1/2
3/4
1 3/4
5/16
5/16
2 1/2
13/16
1 11/16
3/8
3/8
2 1/2
7/8
1 5/8
l2
l3
Single End – Stub Length – 2 and 4 Flute
30° right-hand spiral/right-hand cutting/center cutting
SLEC-125-S2
SLEC-156-S2
SLEC-188-S2
SLEC-219-S2
SLEC-250-S2
SLEC-312-S2
SLEC-375-S2
SLEC-061-S4
SLEC-094-S4
SLEC-125-S4
SLEC-156-S4
SLEC-188-S4
SLEC-219-S4
SLEC-250-S4
SLEC-312-S4
SLEC-375-S4
KC610M
SLEC-094-S2
catalog number
K600
SLEC-061-S2
KC610M
catalog number
4 flute
K600
2 flute
end mill dimensions
d1
d2
l1
1/16
1/8
1 1/2
1/8
1 3/8
3/32
1/8
1 1/2
3/16
1 1/32
1/8
1/8
1 1/2
1/4
1 1/4
5/32
3/16
2
5/16
1 11/16
3/16
3/16
2
3/8
1 5/8
7/32
1/4
2
7/16
1 9/16
1/4
1/4
2
1/2
1 1/2
5/16
5/16
2
1/2
1 1/2
3/8
3/8
2
5/8
1 3/8
261
®
General Purpose
30° right-hand spiral/right-hand cutting/center cutting/square end
HEC-078-S2
HEC-094-S2
HEC-109-S2
HEC-125-S2
HEC-141-S2
HEC-156-S2
HEC-172-S2
HEC-188-S2
HEC-203-S2
HEC-219-S2
HEC-234-S2
HEC-250-S2
HEC-266-S2
HEC-281-S2
HEC-297-S2
HEC-312-S2
HEC-328-S2
HEC-344-S2
HEC-360-S2
HEC-375-S2
262
HEC-047-S3
HEC-062-S3
HEC-078-S3
HEC-094-S3
HEC-109-S3
HEC-125-S3
HEC-141-S3
HEC-156-S3
HEC-172-S3
HEC-188-S3
HEC-203-S3
HEC-219-S3
HEC-234-S3
HEC-250-S3
HEC-266-S3
HEC-281-S3
HEC-297-S3
HEC-312-S3
HEC-328-S3
HEC-344-S3
HEC-360-S3
HEC-375-S3
HEC-016-S4
HEC-031-S4
HEC-047-S4
HEC-062-S4
HEC-078-S4
HEC-094-S4
HEC-109-S4
HEC-125-S4
HEC-141-S4
HEC-156-S4
HEC-172-S4
HEC-188-S4
HEC-203-S4
HEC-219-S4
HEC-234-S4
HEC-250-S4
HEC-266-S4
HEC-281-S4
HEC-297-S4
HEC-312-S4
HEC-328-S4
HEC-344-S4
HEC-360-S4
HEC-375-S4
KC635M
KC635M
HEC-031-S3
KC610M
HEC-062-S2
HEC-016-S3
catalog
number
K600
HEC-047-S2
K600
HEC-031-S2
catalog
number
4 flute
KC610M
HEC-016-S2
K600
catalog
number
3 flute
KC610M
2 flute
end mill dimensions
d1
d2
l1
l2
l3
1/64
1/8
1 1/2
1/32
1 15/32
1/32
1/8
1 1/2
5/64
1 27/64
3/64
1/8
1 1/2
7/64
1 25/64
1/16
1/8
1 1/2
3/16
1 5/16
5/64
1/8
1 1/2
3/16
1 5/16
3/32
1/8
1 1/2
3/8
1 1/8
7/64
1/8
1 1/2
3/8
1 1/8
1/8
1/8
1 1/2
1/2
1
9/64
3/16
2
9/16
1 7/16
5/32
3/16
2
9/16
1 7/16
11/64
3/16
2
5/8
1 3/8
3/16
3/16
2
5/8
1 3/8
13/64
1/4
2 1/2
5/8
1 7/8
7/32
1/4
2 1/2
5/8
1 7/8
15/64
1/4
2 1/2
3/4
1 3/4
1/4
1/4
2 1/2
3/4
1 3/4
17/64
5/16
2 1/2
3/4
1 3/4
9/32
5/16
2 1/2
3/4
1 3/4
19/64
5/16
2 1/2
13/16
1 11/16
5/16
5/16
2 1/2
13/16
1 11/16
21/64
3/8
2 1/2
1
1 1/2
11/32
3/8
2 1/2
1
1 1/2
23/64
3/8
2 1/2
1
1 1/2
3/8
3/8
2 1/2
1
1 1/2
Double End
general purpose/right-hand cutting/right-hand spiral/center cutting
2 flute
4 flute
DHEC-078-S2
DHEC-094-S2
DHEC-109-S2
DHEC-125-S2
DHEC-141-S2
DHEC-156-S2
DHEC-172-S2
DHEC-188-S2
DHEC-203-S2
DHEC-219-S2
DHEC-234-S2
DHEC-250-S2
DHEC-281-S2
DHEC-312-S2
DHEC-375-S2
KC635M
DHEC-031-S4
DHEC-047-S4
DHEC-062-S4
DHEC-078-S4
DHEC-094-S4
DHEC-109-S4
DHEC-125-S4
DHEC-141-S4
DHEC-156-S4
DHEC-172-S4
DHEC-188-S4
DHEC-203-S4
DHEC-219-S4
DHEC-234-S4
DHEC-250-S4
DHEC-281-S4
DHEC-312-S4
DHEC-375-S4
KC635M
DHEC-062-S2
KC610M
DHEC-047-S2
catalog number
K600
DHEC-031-S2
KC610M
catalog number
K600
end mill dimensions
d1
1/32
d2
l1
l2
l3
1/8
1 1/2
1/16
1 7/16
3/64
1/8
1 1/2
3/32
1 13/32
1/16
1/8
1 1/2
1/8
1 3/8
5/64
1/8
1 1/2
1/8
1 3/8
3/32
1/8
1 1/2
3/16
1 5/16
7/64
1/8
1 1/2
3/16
1 5/16
1/8
3/16
2
1/4
1 3/4
9/64
3/16
2
5/16
1 3/16
5/32
3/16
2
5/16
1 3/16
11/64
3/16
2
5/16
1 3/16
3/16
3/16
2
3/8
1 5/8
13/64
1/4
2 1/2
1/2
2
7/32
1/4
2 1/2
1/2
2
15/64
1/4
2 1/2
1/2
2
1/4
1/4
2 1/2
1/2
2
9/32
5/16
2 1/2
1/2
2
5/16
5/16
2 1/2
1/2
2
3/8
3/8
3
9/16
2 7/16
263
®
Corner Radius
right-hand spiral/right-hand cutting/center cutting
CRHEC-125-S4-R15
CRHEC-125-S4-R20
CRHEC-188-S4-R15
CRHEC-188-S4-R20
CRHEC-188-S4-R30
CRHEC-250-S4-R15
CRHEC-250-S4-R20
CRHEC-250-S4-R30
CRHEC-250-S4-R45
CRHEC-312-S4-R15
CRHEC-312-S4-R20
CRHEC-312-S4-R30
CRHEC-312-S4-R45
CRHEC-375-S4-R15
CRHEC-375-S4-R20
CRHEC-375-S4-R30
CRHEC-375-S4-R45
**Weldon flat on shank.
264
KC635M
KC610M
catalog number
K600
4 flute
end mill dimensions
corner
radius
d1
d2
l1
l2
l3
.015
1/8
1/8
1 1/2
1/2
1
.020
1/8
1/8
1 1/2
1/2
1
.015
3/16
3/16
2
5/8
1 3/8
.020
3/16
3/16
2
5/8
1 3/8
.030
3/16
3/16
2
5/8
1 3/8
.015
1/4
1/4
2 1/2
3/4
1 3/4
.020
1/4
1/4
2 1/2
3/4
1 3/4
.030
1/4
1/4
2 1/2
3/4
1 3/4
.045
1/4
1/4
2 1/2
3/4
1 3/4
.015
5/16
5/16
2 1/2
13/16
1 11/16
.020
5/16
5/16
2 1/2
13/16
1 11/16
.030
5/16
5/16
2 1/2
13/16
1 11/16
.045
5/16
5/16
2 1/2
13/16
1 11/16
.015
3/8
3/8**
2 1/2
1
1 1/2
.020
3/8
3/8**
2 1/2
1
1 1/2
.030
3/8
3/8**
2 1/2
1
1 1/2
.045
3/8
3/8**
2 1/2
1
1 1/2
Ball-Nose
BNEC-047-S2
BNEC-062-S2
BNEC-078-S2
BNEC-094-S2
BNEC-109-S2
BNEC-125-S2
BNEC-141-S2
BNEC-156-S2
BNEC-172-S2
BNEC-188-S2
BNEC-203-S2
BNEC-219-S2
BNEC-234-S2
BNEC-250-S2
BNEC-266-S2
BNEC-281-S2
BNEC-297-S2
BNEC-312-S2
BNEC-328-S2
BNEC-344-S2
BNEC-360-S2
BNEC-375-S2
BNEC-016-S4
BNEC-031-S4
BNEC-047-S4
BNEC-062-S4
BNEC-078-S4
BNEC-094-S4
BNEC-109-S4
BNEC-125-S4
BNEC-141-S4
BNEC-156-S4
BNEC-172-S4
BNEC-188-S4
BNEC-203-S4
BNEC-219-S4
BNEC-234-S4
BNEC-250-S4
BNEC-266-S4
BNEC-281-S4
BNEC-297-S4
BNEC-312-S4
BNEC-328-S4
BNEC-344-S4
BNEC-360-S4
BNEC-375-S4
KC635M
KC635M
KC610M
BNEC-031-S2
catalog number
K600
BNEC-016-S2
KC610M
catalog number
4 flute
K600
2 flute
end mill dimensions
d1
d2
l1
l2
l3
1/64
1/8
1 1/2
1/32
1 15/32
1/32
1/8
1 1/2
5/64
1 27/64
3/64
1/8
1 1/2
7/64
1 25/64
1/16
1/8
1 1/2
3/16
1 5/16
5/64
1/8
1 1/2
3/16
1 5/16
3/32
1/8
1 1/2
3/8
1 1/8
7/64
1/8
1 1/2
3/8
1 1/8
1/8
1/8
1 1/2
1/2
1
9/64
3/16
2
9/16
1 7/16
5/32
3/16
2
9/16
1 7/16
11/64
3/16
2
5/8
1 3/8
3/16
3/16
2
5/8
1 3/8
13/64
1/4
2 1/2
5/8
1 7/8
7/32
1/4
2 1/2
5/8
1 7/8
15/64
1/4
2 1/2
3/4
1 3/4
1/4
1/4
2 1/2
3/4
1 3/4
17/64
5/16
2 1/2
3/4
1 3/4
9/32
5/16
2 1/2
3/4
1 3/4
19/64
5/16
2 1/2
13/16
1 11/16
5/16
5/16
2 1/2
13/16
1 11/16
21/64
3/8
2 1/2
1
1 1/2
11/32
3/8
2 1/2
1
1 1/2
23/64
3/8
2 1/2
1
1 1/2
3/8
3/8
2 1/2
1
1 1/2
265
®
Double End Ball-Nose
4 flute
DBNEC-031-S4
DBNEC-047-S4
DBNEC-062-S4
DBNEC-078-S4
DBNEC-094-S4
DBNEC-109-S4
DBNEC-125-S4
DBNEC-141-S4
DBNEC-156-S4
DBNEC-172-S4
DBNEC-188-S4
DBNEC-203-S4
DBNEC-219-S4
DBNEC-234-S4
DBNEC-250-S4
DBNEC-281-S4
DBNEC-312-S4
DBNEC-375-S4
266
KC635M
KC610M
catalog number
K600
end mill dimensions
d1
d2
l1
l2
l3
1/32
1/8
1 1/2
1/16
1 7/16
3/64
1/8
1 1/2
3/32
1 13/32
1/16
1/8
1 1/2
1/8
1 3/8
5/64
1/8
1 1/2
1/8
1 3/8
3/32
1/8
1 1/2
3/16
1 5/16
7/64
1/8
1 1/2
3/16
1 5/16
1/8
3/16
2
1/4
1 3/4
9/64
3/16
2
5/16
1 11/16
5/32
3/16
2
5/16
1 11/16
11/64
3/16
2
5/16
1 11/16
3/16
3/16
2
3/8
1 5/8
13/64
1/4
2 1/2
1/2
2
7/32
1/4
2 1/2
1/2
2
15/64
1/4
2 1/2
1/2
2
1/4
1/4
2 1/2
1/2
2
9/32
5/16
2 1/2
1/2
2
5/16
5/16
2 1/2
1/2
2
3/8
3/8
3
9/16
2 7/16
Metric High-Performance Solid Carbide End Mills
High Shear — Specially Designed for Non-Ferrous Applications
DIN 6527L, 45° Helix Angle
2 flute
F2AA0400ADL45
F2AA0500ADL45
F2AA0600ADL45
F2AA0800ADL45
F2AA1000ADL45
KC631M
catalog number
K600
end mill dimensions
d1
d2
l1
l2
l3
4
6
57
8
36
5
6
57
10
36
6
6
57
10
36
8
8
63
16
36
10
10
72
19
40
3 flute
F3AA0300AWS45
F3AA0400AWS45
F3AA0500AWS45
F3AA0600AWS45
F3AA0800AWM45
F3AA1000AWL45
KC631M
catalog number
K600
end mill dimensions
d1
d2
l1
l2
l3
3
3
38
12
24
4
4
50
12
35
5
6
50
14
33
6
6
50
16
30
8
8
63
20
38
10
10
76
22
46
267
®
General Purpose
DIN 6527L, 30° Helix Angle
F2AH0250ADL30
F2AH0300ADL30
F2AH0400ADL30
F2AH0450ADL30
—
F2AH0500ADL30
F2AH0550ADL30
—
F2AH0600ADL30
—
—
F2AH0700ADL30
—
F2AH0800ADL30
—
—
F2AH0900ADL30
—
F2AH1000ADL30
268
—
—
F3AH0400ADL30
F3AH0450ADL30
F3AH0480ADL30
F3AH0500ADL30
F3AH0550ADL30
F3AH0575ADL30
F3AH0600ADL30
F3AH0650ADL30
F3AH0675ADL30
F3AH0700ADL30
F3AH0775ADL30
F3AH0800ADL30
F3AH0850ADL30
F3AH0870ADL30
F3AH0900ADL30
F3AH0970ADL30
F3AH1000ADL30
—
—
F4AJ0400ADL30
F4AJ0450ADL30
—
F4AJ0500ADL30
—
—
F4AJ0600ADL30
—
—
F4AJ0700ADL30
—
F4AJ0800ADL30
—
—
F4AJ0900ADL30
—
F4AJ1000ADL30
KC625M
catalog
number
K600
K600
catalog
number
4 flute
KC625M
K600
catalog
number
3 flute
KC625M
2 flute
end mill dimensions
l2
l2
d1
d2
l1
2 and 3
flute
4 flute
l3
2,50
6
57
7
—
39
3,00
6
57
7
—
39
4,00
6
57
8
11
38
4,50
6
57
8
11
38
4,80
6
57
10
—
38
5,00
6
57
10
13
37
5,50
6
57
10
—
37
5,75
6
57
10
—
37
6,00
6
57
10
13
36
6,50
8
63
13
—
36
6,75
8
63
13
—
36
7,00
8
63
13
16
36
7,75
8
63
16
—
36
8,00
8
63
16
19
36
8,50
10
72
16
—
40
8,70
10
72
16
—
40
9,00
10
72
16
19
40
9,70
10
72
19
—
40
10,00
10
72
19
22
40
Ball Nose and Radiused End Mills
DIN 6528 and DIN 6527L, 30° Helix Angle
F2AL0200ADL30
F2AL0300ADL30
F2AL0400ADL30
F2AL0500ADL30
F2AL0600ADL30
F2AL0800ADL30
F2AL1000ADL30
—
F4AL0300ADL30
F4AL0400ADL30
F4AL0500ADL30
F4AL0600ADL30
F4AL0800ADL30
F4AL1000ADL30
KC633M
catalog number
K600
KC633M
catalog number
4 flute
K600
2 flute
end mill dimensions
l2
l2
2 flute
4 flute
57
6
—
36
6
57
7
7
36
6
57
8
8
36
5
6
57
10
11
36
6
6
57
10
13
36
d1
d2
l1
2
6
3
4
l3
8
8
63
16
19
36
10
10
72
19
22
40
269
Toolholding Systems
DA Collets
• Kennametal Double Angle (DA) collet
system provides true gripping on cutting
margins of drills for greater feeds and
speeds. DA collets allow shorter projection
lengths for improved accuracy.
• Range of collapse is 1/32 (0,8 mm).
• Use these collets mainly for drilling
applications.
TG Collets
• Tremendous Grip (TG) single angle
collet system provides additional
grip with better concentricity.
• Range of collapse is 1/64 (0,4 mm).
• Use these collets in drilling, milling (TGNP),
and tapping (TGST) operations.
ER Collets
• ER collets (DIN 6499) offer flexibility
when drilling, light milling, or tapping
with or without the use of coolant.
• Three different styles of locknuts
are available.
• Range of collapse is .039 (1 mm).
270
Toolholding Systems
page
Collet Chucks
DA ’0 1 Style (Double Angle) . . . . . . . . . . . . . . .
DA ’0 4 Style (Double Angle) . . . . . . . . . . . . . . . .
DA ’0 8 Style (Double Angle) . . . . . . . . . . . . . . . . .
272
273
274
Collet and Solid Tap Chucks
ER Style (DIN 6499) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TG Style (Tremendous Grip) . . . . . . . . . . . . . . . . . . . . . . .
275
276
Tap Chucks
DA – Tension Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DA – Tension and Compression . . . . . . . . . . . . . . . . . . . . . . .
TG – Self Releasing (Tension Only). . . . . . . . . . . . . . . . . . . . . .
277
278
279
Floating Holders
DA – Double Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DA – Full Floating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DA – Roller Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
280
281
282
Adjustable Flange
DA ’08 Style (Double Angle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
283
Collets
DA – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reamer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
284
285
286
ER – Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
287
288
TG – Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
289
291
292
271
271
Toolholding Systems
®
Double Angle ’01 Style Collet Chucks – Straight Shank
• Offers the most accurate double angle design possible;
•
• Collets collapse 1/32", and can grip on back taper and margins of
recommended for high-speed applications.
Unique bearing-style nosepiece provides fixture clearance.
•
drills to allow for maximum feed rates and more accurate holes.
Unique, adjustable stop screw allows drills to be preset and
provides through-coolant capability.
Recommended for Drilling
Collets
See page 284.
catalog number
SS050DA301544
SS062DA301319
SS062DA301544
SS062DA201325
SS062DA201600
SS075DA301344
SS075DA301544
SS075DA201600
SS075DA101650
SS100DA301544
SS100DA201600
SS100DA101650
SS100DA181638
Ø
inch
mm
1/64-1/4
1/64-1/4
1/64-1/4
1/64-3/8
1/64-3/8
1/64-1/4
1/64-1/4
1/64-3/8
1/32-9/16
1/64-1/4
1/64-3/8
1/32-9/16
1/32-3/4
0,5-6
0,5-6
0,5-6
0,5-10
0,5-10
0,5-6
0,5-6
0,5-10
1-14
0,5-6
0,5-10
1-14
1-20
300DA
300DA
300DA
200DA
200DA
300DA
300DA
200DA
100DA
300DA
200DA
100DA
180DA
d1
d2
l1
l2
l3 min.
l3 max.
.50
.62
.62
.62
.62
.75
.75
.75
.75
1.00
1.00
1.00
1.00
.87
.87
.87
1.44
1.44
.87
.87
1.44
1.73
.87
1.44
1.73
2.02
5.44
3.19
5.44
3.25
6.00
3.44
5.44
6.00
6.50
5.44
6.00
6.50
6.38
4.00
1.75
4.00
1.25
4.00
2.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
1.44
1.44
1.44
1.44
1.44
1.44
1.44
1.69
1.75
1.44
1.69
1.88
1.75
4.25
2.75
4.25
2.81
4.25
3.00
5.00
4.12
5.75
4.25
4.12
5.62
5.62
.30
.27
.47
.28
.52
.43
.68
.75
.81
1.20
1.33
1.44
1.41
NOTE: Coolant-fed tools require coolant caps and collets.
Spares and Information
catalog number
SS050DA301544
SS062DA301319
SS062DA301544
SS062DA201325
SS062DA201600
SS075DA301344
SS075DA301544
SS075DA201600
SS075DA101650
SS100DA301544
SS100DA201600
SS100DA101650
SS100DA181638
nosepiece*
locknut*
locknut torque**
(ft.-lbs.)
wrench*
stop screw*
NP301
NP301
NP301
NP201
NP201
NP301
NP301
NP201
NP101
NP301
NP201
NP101
NP181
LN301
LN301
LN301
LN201
LN201
LN301
LN301
LN201
LN101
LN301
LN201
LN101
LN181
25-30
25-30
25-30
32-40
32-40
25-30
25-30
32-40
40-50
25-30
32-40
40-50
60-75
OEW075
OEW075
OEW075
OEW125
OEW125
OEW075
OEW075
OEW125
OEW150
OEW075
OEW125
OEW150
OEW175
SS031031G
SS031031G
SS031031G
SS038031G
SS038031G
SS031031G
SS031031G
SS044038G
SS050038G
SS031031G
SS044038G
SS062041G
SS075041G
*Chuck includes locknut, nosepiece, and stop screw. Locknut wrench must be ordered separately.
**For maximum safety and performance, tighten the locknut to the specified torque value.
272
Toolholding Systems
• Small outside diameter is ideal for use with machining
•
• Unique, adjustable stop screw allows drills to be preset and
centers and for solving close center distance and fixture
clearance problems.
Collets collapse 1/32" and can grip on back taper and
margins of drills to allow for maximum feed rates.
Collets
See page 284.
Ø
catalog number
SS050DA304438
SS050DA304681
SS075DA204469
SS075DA204712
SS100DA104488
SS100DA104731
inch
mm
1/64-1/4
1/64-1/4
1/64-3/8
1/64-3/8
1/32-9/16
1/32-9/16
0,5-6
0,5-6
0,5-10
0,5-10
1-14
1-14
300DA
300DA
200DA
200DA
100DA
100DA
d1
d2
l1
l2
l3 min.
l3 max.
.50
.50
.75
.75
1.00
1.00
.56
.56
.84
.84
1.06
1.06
4.38
6.81
4.69
7.12
4.88
7.31
3.00
5.42
3.03
5.50
2.97
5.40
1.56
1.50
1.69
1.69
1.94
1.94
3.94
4.25
4.12
4.74
4.19
6.62
.24
.37
.58
.89
1.08
1.62
catalog number
SS050DA304438
SS050DA304681
SS075DA204469
SS075DA204712
SS100DA104488
SS100DA104731
locknut*
locknut torque**
(ft.-lbs.)
wrench*
stop screw*
LNA304M
LNA304M
LNA204M
LNA204M
LNA104M
LNA104M
25-30
25-30
32-40
32-40
40-50
40-50
OEW050
OEW050
OEW075
OEW075
OEW094
OEW094
SS031031G
SS031031G
SS044038G
SS044038G
SS062041G
SS062041G
*Chuck includes locknut and stop screw. Locknut wrench must be ordered separately.
273
Toolholding Systems
®
• Offers a rugged heavy-duty design.
• Collets collapse 1/32" and can grip on back taper and margins of
• Unique adjustable stop screw allows drills to be preset and
Collets
See page 284.
Ø
catalog number
SS050DA308516
SS062DA308516
SS062DA208569
SS075DA308516
SS075DA208531
SS075DA108588
SS100DA308516
SS100DA208531
SS100DA108556
SS100DA188638
inch
mm
1/64-1/4
1/64-1/4
1/64-3/8
1/64-1/4
1/64-3/8
1/32-9/16
1/64-1/4
1/64-3/8
1/32-9/16
1/32-3/4
0,5-6
0,5-6
0,5-10
0,5-6
0,5-10
1-14
0,5-6
0,5-10
1-14
1-20
300DA
300DA
200DA
300DA
200DA
100DA
300DA
200DA
100DA
180DA
d1
d2
l1
l2
l3 min.
l3 max.
.50
.62
.62
.75
.75
.75
1.00
1.00
1.00
1.00
.79
.79
1.15
.79
1.15
1.42
.79
1.15
1.42
1.73
5.16
5.16
5.69
5.16
5.31
5.88
5.16
5.31
5.56
6.38
4.00
4.00
4.00
4.25
4.00
4.00
4.00
4.00
4.00
4.00
1.50
1.50
1.62
1.50
1.62
1.81
1.50
1.69
1.94
1.94
4.25
4.25
4.25
4.25
4.12
5.31
4.25
4.12
4.88
5.62
catalog number
SS050DA308516
SS062DA308516
SS062DA208569
SS075DA308516
SS075DA208531
SS075DA108588
SS100DA308516
SS100DA208531
SS100DA108556
SS100DA188638
locknut*
locknut torque**
(ft.-lbs.)
wrench*
stop screw*
LNA308M
LNA308M
NPA208
LNA308M
NPA208
LNA108M
LNA308M
NPA208
LNA108M
NPA188
20-25
20-25
32-40
20-25
32-40
40-50
20-25
32-40
40-50
60-75
OEW068
OEW068
OEW100
OEW069
OEW100
OEW125
OEW068
OEW100
OEW125
OEW150
SS031031G
SS031031G
SS044038G
SS031031G
SS044038G
SS050038G
SS031031G
SS044038G
SS062041G
SS075041G
274
.28
.44
.49
.64
.66
.73
1.14
1.18
1.23
1.41
Toolholding Systems
ER-Style DIN 6499 Collet Chucks – Straight Shank
• ER8 and ER11 collets collapse 0,5 mm. Larger series
collapse 1 mm.
Recommended for Drilling and Tapping
Collets
See pages
287-288.
Ø
catalog number
metric
SS200ER16182M
inch
SS038ER08500
SS050ER11700
SS075ER16700
SS100ER20700
SS100ER25750
inch
mm
.02-.40
0,5-10,0
.02-.19
.02-.27
.02-.40
.02-.51
.04-.63
0,5-5,0
0,5-7,0
0,5-10,0
0,5-13,0
1,0-16,0
d1
d2
l1
l2
l3 min.
l3 max.
16ER
20 mm
0,87
7,14
5,51
1,59
6,35
1.0
8ER
11ER
16ER
20ER
25ER
.375
.50
.75
1.00
1.00
.47
.63
.87
1.38
1.65
5.00
7.00
7.00
7.00
7.50
4.14
5.51
5.51
5.51
5.69
.85
1.27
1.24
1.42
1.57
4.31
6.31
3.54
6.31
6.81
.2
.4
.9
1.6
1.7
catalog number
metric
SS200ER16182M
inch
SS038ER08500
SS050ER11700
SS075ER16700
SS100ER20700
SS100ER25750
locknut*
locknut torque**
(ft.-lbs.)
LER16M
15-20
ER16WEM
CSS1020M
LER08M
LER11M
LER16M
LNER20M
LNER25M
3-4
8-10
15-20
60-75
75-95
ER08WEM
ER11WEM
ER16WEM
ER20WM
ER25WM
S-1762
SS031031G
SS050038G
SS062041G
SS075041G
wrench*
stop screw*
275
Toolholding Systems
®
Tremendous Grip TG-Style Collet Chucks – Straight Shank
• Tremendous Grip (TG) collet chucks provide the grip and
•
• Collets collapse 1/64" and can grip on back taper and margins of
accuracy necessary for the demands of today’s machine tools
because of its slow collet taper and bearing-style nosepiece.
Unique left-hand, adjustable backup screw allows drills to be
preset and provides through-coolant capability.
•
The versatility and gripping power of the TG chuck is superior to
competitive designs.
Recommended for Drilling and Solid Tapping
Collets
See pages
289-294.
Ø
catalog number
SS100TG050719
SS100TG050698G
inch
mm
1/32-17/32
1/32-17/32
1-13
1-13
50TG
50TG
d1
d2
l1
l2
l3 min.
l3 max.
1.00
1.00
1.19
1.50
7.19
6.98
5.50
5.50
1.75
1.54
6.50
6.30
OEW
HSW
catalog number
SS100TG050719
SS100TG050698G
locknut*
locknut torque**
(ft.-lbs.)
wrench*
stop screw*
NPA050
LNA050M
60-75
60-75
OEW106
HSW34M
SS062041G
SS062041G
276
1.59
1.59
Toolholding Systems
Double Angle Tapping Chucks – Straight Shank (Tension Only)
• Minimum diameter for close center work.
• Simple collet-type design.
• Tension design compensates for differences between machine feed • Alternative springs available to adjust tension pressure. Helps
and tap lead.
control thread quality under a variety of workpiece conditions.
• Solid hard start ensures that the tap will start at the same point
•
• Positive drive collets prevent tap slippage.
• Economical to use.
every time whether it is sharp or dull.
Right-hand or left-hand tapping capability.
Collet Type
Key Drive – for Through-Hole Tapping on Turning Centers
*ORDERING INFORMATION:
Order by catalog number.
Order wrench separately.
Order collets by matching series
with corresponding chuck.
Collets available on
pages 285-286.
Locknut included.
Collets
See pages
285-286.
Ø
catalog number
SS075TOJ712
SS100TOK700
SS100TOL750
#0-1/2
1/16P
M1-M12
#0-5/8
1/16P-1/8P
M1-M16
#0-7/8
1/16P-1/2P
M5-M24
tension
comp.
d1
d2
l1
l2
l3
J
.50
none
.75
.81
7.12
5.13
.50
.72
K
.75
none
1.00
1.06
7.00
5.12
.48
1.86
L
.75
none
1.00
1.31
7.56
3.75
.56
2.24
NOTE: Through coolant not available.
catalog number
locknut torque**
(ft.-lbs.)
locknut*
SS075TOJ712
SS100TOK700
SS100TOL750
LNA204M
LNAK04M
LNAL04M
32-40
40-50
60-75
wrench*
OEW075
OEW094
OEW125
*Chuck includes locknut. Locknut wrench must be ordered separately.
Alternative Tension Adjustment Springs (Tension Only Chucks)
tap chuck
standard spring
SS075TOJ712
CS0563041156
SS100TOK700
CS0600055150
SS100TOL750
CS0600049125
alternate spring
heavier
CS0540041150
lighter
CS0563041156
heavier
CS0600055150
preload
(lbs./in.2)
2.37
3.50
7.50
2.37
3.25
7.50
NOTE: Springs come in a package of two. Add “PKG” to end of part number when ordering.
277
Toolholding Systems
®
Double Angle Tapping Chucks – Straight Shank (Tension and Compression)
• Minimum diameter for close center work.
• Tension/compression design compensates for differences
• Alternative springs available to adjust tension pressure. Helps
•
•
between machine feed and tap lead.
• Right-hand or left-hand tapping capability.
• Simple collet-type design.
control thread quality under a variety of workpiece conditions.
Positive drive collets prevent tap slippage.
Economical to use.
Collet Type
Key Drive – for Through-Hole Tapping on Turning Centers
Collets
See pages
285-286.
Ø
catalog number
SS075TCJ731
SS100TCK719
SS100TCL769
#0-1/2
1/16P
M1-M12
#0-5/8
1/16P-1/8P
M1-M16
#0-7/8
1/16P-1/2P
M5-M24
tension
comp.
d1
d2
l1
l2
l3
J
.56
.19
.75
.81
7.31
5.13
.50
.72
K
.56
.19
1.00
1.06
7.18
5.12
.48
1.86
L
.56
.19
1.00
1.31
7.68
3.75
.56
2.24
NOTE: Through-coolant not available.
catalog number
locknut*
SS075TCJ731
SS100TCK719
SS100TCL769
LNA204M
LNAK04M
LNAL04M
278
locknut torque**
(ft.-lbs.)
32-40
40-50
60-75
wrench*
OEW075
OEW094
OEW125
Toolholding Systems
TG-Style Tapping Chucks – Straight Shank (Self Releasing)
• Accurate depth control for tapping blind holes.
• Overriding clutch mechanism disengages when the tap reaches
•
the required depth, enabling the tap to “free-spin” until the
machine spindle is reversed.
Tension-only design for tapping through holes.
• Solid hard start ensures that the tap will begin to cut at the same
•
•
•
point every time, whether the tap is sharp or dull.
Dependable, rugged, and compact.
Positive drive collets prevent slippage.
Right-hand or left-hand tapping capability.
Tension Only
Collets
See pages
289-294.
catalog number
Ø
SS100SRTG50562
#0-5/8
1/16P-1/8P
#0-7/8
1/16P-1/2P
#0-1 1/8
1/16P-3/4P
SS100SRTG75606
SS100SRTG100700
stroke to
disengage tension
comp.
d1
d2
l1
l2
l3
50TG
.125
none
1.00
1.21
2.125
5.625
2.25
2.71
75TG
.125
none
1.00
1.96
2.125
6.062
2.25
3.34
100TG
.125
none
1.00
2.36
2.125
7.000
2.25
4.62
NOTE: Through coolant not available.
HSW
OEW
catalog number
locknut*
SS100SRTG50562
SS100SRTG75606
SS100SRTG100700
NPA050
LNA075M
LNA100M
locknut torque**
(ft.-lbs.)
60-75
80-100
120-150
wrench*
OEW106
HSW45M
HSW58M
279
Toolholding Systems
®
Double Angle Floating Holders – Straight Shank
• Holder is ideal for machining centers.
• It provides .004 movement in all directions to compensate for both
• Minimum outside diameter and overhang provide maximum
•
angular and parallel misalignments.
tool clearance.
Industry-standard Double Angle collets collapse 1/32".
Double Pin – Recommended for Reaming
Collets
See page 286.
catalog number
SS050DP308403
SS075DP308403
SS075DP208448
SS100DP308403
SS100DP208448
SS100DP108562
Ø
inch
mm
1/64-1/4
1/64-1/4
1/64-3/8
1/64-1/4
1/64-3/8
1/32-9/16
0,5-6
0,5-6
0,5-10
0,5-6
0,5-10
1-14
300DA
300DA
200DA
300DA
200DA
100DA
d1
d2 dia.
d2 hex
l1
l2
.50
.75
.75
1.00
1.00
1.00
.69
.69
.94
.69
.94
1.19
5/8
5/8
7/8
5/8
7/8
1 1/8
4.03
4.03
4.48
4.03
4.50
5.62
2.50
2.57
2.88
2.50
3.00
3.50
.22
.50
.56
.89
.99
1.24
locknut
shank
catalog number
SS050DP308403
SS075DP308403
SS075DP208448
SS100DP308403
SS100DP208448
SS100DP108562
locknut*
locknut torque**
(ft.-lbs.)
NPA338
NPA338
NPA238
NPA338
NPA238
NPA139
20-25
20-25
32-40
20-25
32-40
40-50
wrench*
OEW062
OEW062
OEW088
OEW062
OEW088
OEW112
*Chuck includes locknut. Wrenches must be purchased separately. Use of two wrenches is recommended to prevent premature wear on float mechanism.
280
OEW050
OEW050
OEW062
OEW050
OEW062
OEW088
Toolholding Systems
Double Angle Floating Holders – Straight Shank
• Holder provides .010 float in all directions to compensate for both
•
• Industry-standard Double Angle collets collapse 1/32".
• Recommended for stationary applications.
• Adjusting nut varies spring tension to compensate for
parallel and angular misalignments.
Hollow design allows tool overhang to be shortened.
cutter weight.
Full Floating – Recommended for Reaming
Collets
See page 286.
catalog number
SS075FC208644
SS075FC108659
SS075FC188688
SS100FC208644
SS100FC108659
SS100FC188688
SS100FC188888
Ø
inch
mm
1/64-3/8
1/32-9/16
1/32-3/4
1/64-3/8
1/32-9/16
1/32-3/4
1/32-3/4
0,5-10
1-14
1-20
0,5-10
1-14
1-20
1-20
200DA
100DA
180DA
200DA
100DA
180DA
180DA
d1
d2
d3
l1
l2
.75
.75
.75
1.00
1.00
1.00
1.00
.94
1.42
1.73
.94
1.42
1.73
1.73
1.88
2.06
2.38
1.88
2.06
2.38
2.38
6.44
6.59
6.88
6.44
6.59
6.88
8.88
4.00
4.00
4.00
4.00
4.00
4.00
6.00
.80
.85
.86
1.43
1.46
1.52
1.97
locknut
adjusting
nut
catalog number
SS075FC208644
SS075FC108659
SS075FC188688
SS100FC208644
SS100FC108659
SS100FC188688
SS100FC188888
locknut*
locknut torque**
(ft.-lbs.)
NPA238
LNA108M
NPA188
NPA238
LNA108M
NPA188
NPA188
32-40
40-50
60-75
32-40
40-50
60-75
60-75
wrench*
OEW088
OEW125
OEW150
OEW088
OEW125
OEW150
OEW150
AHSW075200
AHSW200475
AHSW200475
AHSW075200
AHSW200475
AHSW200475
AHSW200475
*Chuck includes locknut. Wrenches must be ordered separately.
281
Toolholding Systems
®
Double Angle ’08 Style Floating Holders – Straight Shank
• Holder floats 1/32" in all directions, 1/16" total movement to
•
•
• Holder is self-centering and has adjustable float tension to
compensate for parallel misalignments.
Holder can be used in stationary and rotating applications.
Its unique design uses rollers instead of balls to provide
friction-free movement and prolonged holder life.
•
•
compensate for cutter weight.
Holder is completely sealed to eliminate contamination, thus
ensuring longer holder life.
It is also available in popular NC shanks.
Roller Drive – Recommended for Reaming and Solid Tapping
Collets
See pages
285-286.
Ø
catalog number
inch
mm
SS062RDJ519
1/16-13/32
SS075RDJ519
1/16-13/32
SS075RDK519
7/64-19/32
SS100RDJ519
1/16-13/32
SS100RDK519
7/64-19/32
SS100RDL666
7/64-27/32
0-1/2 H.T.
1/8 S.S.P.T.
0-5/8 H.T.
1/16, 1/8 P.T.
0-5/8 H.T.
1/16, 1/8 P.T.
0-1/2 H.T.
1/8 S.S.P.T.
0-5/8 H.T.
1/16, 1/8 P.T.
0-7/8 H.T.
1/16-1/2 P.T.
d1
d2
d3
l1
l2
l3
J
.62
1.15
1.50
5.19
3.00
1.38
.45
J
.75
1.15
1.50
5.19
3.00
1.38
.64
K
.75
1.19
1.81
5.19
3.00
1.19
.65
J
1.00
1.15
1.50
5.19
3.00
1.38
1.15
K
1.00
1.19
1.81
5.19
3.00
1.19
1.16
L
1.00
1.88
2.19
6.66
4.00
1.41
1.20
catalog number
SS062RDJ519
SS075RDJ519
SS075RDK519
SS100RDJ519
SS100RDK519
SS100RDL666
locknut*
locknut torque**
(ft.-lbs.)
wrench*
NPA208
NPA208
NPAK08
NPA208
NPAK08
NPAF08
32-40
32-40
40-50
32-40
40-50
60-75
OEW100
OEW100
OEW112
OEW100
OEW112
OEW162
*Chuck includes locknut. Locknut wrench must be purchased separately.
282
Toolholding Systems
Double Angle Adjustable Flange – Straight Shank
• Adjusts for parallel misalignment to compensate for
•
• Unique adjustable stop screw allows drills to be preset and
machine inaccuracies.
Collets collapse 1/32" and can grip on back taper and
margins of drills to allow for maximum feed rates and more
accurate holes.
•
•
Ideal for turret lathes and automatics.
Saves setup times and reduces tool breakage.
AF – Recommended for Drilling
Collets
See page 284.
Ø
catalog number
SS062AF308200
SS075AF308288
SS075AF208305
SS075AF108431
inch
mm
1/64-1/4
1/64-1/4
1/64-3/8
1/32-9/16
0,5-6
0,5-6
0,5-10
1-14
300DA
300DA
200DA
100DA
d1
d2
l1
l2
l3 min.
l3 max.
.62
.75
.75
.75
.84
.84
1.16
1.42
2.00
2.88
3.05
4.31
1.12
2.00
1.93
2.40
1.38
1.38
1.47
1.80
1.68
2.38
2.50
3.80
.17
.36
.38
.53
catalog number
SS062AF308200
SS075AF308288
SS075AF208305
SS075AF108431
locknut*
locknut torque**
(ft.-lbs.)
wrench*
stop screw*
NPA329
NPA329
NPA229
LNA108M
20-25
20-25
32-40
40-50
OEW075
OEW075
OEW100
OEW125
SS031031G
SS038031G
SS044038G
SS050038G
*Chuck includes locknut and stop screw. Locknut wrench must be purchased separately.
283
Collets
®
Double Angle
DA (metric) Standard
collets collapse 0,78 mm
Ø
l/d
25,40 / 9,53
300 series
l/d
30,18 / 13,69
200 series
l/ d
36,53 / 19,53
100 series
l/d
41,28 / 26,29
180 series
Ø
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
11,5
12,0
12,5
300DA010M
300DA015M
300DA020M
300DA025M
300DA030M
300DA035M
300DA040M
300DA045M
300DA050M
300DA055M
300DA060M
—
—
—
—
—
—
—
—
—
—
—
—
—
200DA010M
200DA015M
200DA020M
200DA025M
200DA030M
200DA035M
200DA040M
200DA045M
200DA050M
200DA055M
200DA060M
200DA065M
200DA070M
200DA075M
200DA080M
200DA085M
200DA090M
200DA095M
200DA100M
—
—
—
—
—
—
—
—
100DA025M
100DA030M
100DA035M
100DA040M
100DA045M
100DA050M
100DA055M
100DA060M
100DA065M
100DA070M
100DA075M
100DA080M
100DA085M
100DA090M
100DA095M
100DA100M
100DA105M
100DA110M
100DA115M
100DA120M
100DA125M
—
—
—
—
180DA030M
180DA035M
180DA040M
180DA045M
180DA050M
180DA055M
180DA060M
180DA065M
180DA070M
180DA075M
180DA080M
180DA085M
180DA090M
180DA095M
180DA100M
180DA105M
180DA110M
180DA115M
180DA120M
180DA125M
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
11,5
12,0
12,5
Ø
l/d
1.000 / .375
300 series
l/d
1.188 / .539
200 series
l/d
1.438 / .769
100 series
l/d
1.625 / 1.035
180 series
Ø
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
300DA0031
300DA0047
300DA0062
300DA0078
300DA0094
300DA0109
300DA0125
300DA0141
300DA0156
300DA0172
300DA0188
300DA0203
300DA0219
300DA0234
300DA0250
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
200DA0047
200DA0062
200DA0078
200DA0094
200DA0109
200DA0125
200DA0141
200DA0156
200DA0172
200DA0188
200DA0203
200DA0219
200DA0234
200DA0250
200DA0266
200DA0281
200DA0297
200DA0312
200DA0328
200DA0344
200DA0359
200DA0375
200DA0391
—
—
—
—
—
—
—
—
100DA0047
100DA0062
100DA0078
100DA0094
100DA0109
100DA0125
100DA0141
100DA0156
100DA0172
100DA0188
100DA0203
100DA0219
100DA0234
100DA0250
100DA0266
100DA0281
100DA0297
100DA0312
100DA0328
100DA0344
100DA0359
100DA0375
100DA0391
100DA0406
100DA0422
100DA0438
100DA0453
100DA0469
100DA0484
100DA0500
—
180DA0047
180DA0062
180DA0078
180DA0094
180DA0109
180DA0125
180DA0141
180DA0156
180DA0172
180DA0188
180DA0203
180DA0219
180DA0234
180DA0250
180DA0266
180DA0281
180DA0297
180DA0312
180DA0328
180DA0344
180DA0359
180DA0375
180DA0391
180DA0406
180DA0422
180DA0438
180DA0453
180DA0469
180DA0484
180DA0500
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
DA (inch) Standard
284
Collets
Double Angle
J and K Series Tapping Collets (inch)
J
series
JTC6
JTC8
JTC10
JTC12
JTC025
JTC031
JTC037
pipe tap size
JTC006P
K
series
KTC6
KTC8
KTC10
KTC12
KTC025
KTC031
KTC037
pipe tap size
KTC006P
KTC012P
l1
l2
.539
.539
.539
.539
.539
.539
.539
1.188
1.188
1.188
1.188
1.188
1.188
1.188
.50
.50
.50
.50
.50
.50
.50
.05
.05
.05
.05
.05
.05
.05
1/16P & 1/8P(SS)
1/8P(LS)
.539
1.188
.50
.05
Ø
tap size
d1
l1
l2
.141
.168
.194
.220
.255
.318
.381
#0-#6
#8
#10
#12
#14-1/4
5/16
3/8
.769
.769
.769
.769
.769
.769
.769
1.000
1.000
1.000
1.000
1.000
1.000
1.000
.484
.484
.484
.484
.484
.484
.484
.13
.13
.13
.13
.13
.13
.13
.313
.438
1/16P & 1/8P(SS)
1/8P(LS)
.769
.769
1.000
1.000
.484
.484
.13
.13
Ø
tap size
d1
.141
.168
.194
.220
.255
.318
.381
#0-#6
#8
#10
#12
#14-1/4
5/16
3/8
.313
Tap Collet Sets
catalog
number
series
contents of collet sets
SDTCSET
SFTC1SET
SFTC2SET
SGTCSET
SHTCSET
SLTC1SET
D
F
F
G
H
L
5 collets - DTC6 through DTC025
14 collets - FTC025 through FTC050P
18 collets - FTC6 through FTC050P
14 collets - GTC075 through GTC125P
18 collets - HTC075 through HTC175P
18 collets - LTC6 through LTC050P
285
Collets
®
Double Angle
L Series Tapping Collets (inch)
L
series
LTC6
LTC8
LTC10
LTC12
LTC025
LTC031
LTC037
l2
Ø
tap size
d1
.141
.168
.194
.220
.255
.318
.381
#0-#6
#8
#10
#12
#14-1/4
5/16
3/8
1.107
1.107
1.107
1.107
1.107
1.107
1.107
1.094
1.094
1.094
1.094
1.094
1.094
1.094
.562
.562
.562
.562
.562
.562
.562
.24
.24
.24
.24
.24
.24
.24
.563
.700
1/4P
3/8P
1.107
1.107
1.094
1.094
.562
.562
.24
.24
l1
pipe tap size
LTC025P
LTC025P
• Collets are designed for use with Kennametal Roller Drive floating holders.
DA (inch) J, K, and L Series Reamer Collets
286
Ø
l/d
1.188 / .539
J series
l/d
.953 / .769
K series
l/d
1.094 / 1.107
L series
reamer
size
Ø
.059
.088
.119
.151
.181
.208
.241
.250
.281
.312
.375
JRC0059
JRC0088
JRC0119
JRC0151
JRC0181
JRC0208
JRC0241
JRC0250
JRC0281
JRC0312
—
—
—
KRC0119
KRC0151
KRC0181
KRC0208
KRC0241
KRC0250
KRC0281
KRC0312
KRC0375
—
—
LRC0119
—
LRC0181
—
LRC0241
LRC0250
LRC0281
LRC0312
LRC0375
1/16
5/64 & 3/32
7/64 & 1/8
9/64 & 5/32
11/64 & 3/16
13/64 & 7/32
15/64 & 1/4
17/64 & 9/32
19/64 - 11/32
23/64 - 13/32
27/64 - 15/32
.059
.088
.119
.151
.181
.208
.241
.250
.281
.312
.375
Collets
DIN 6499 form B
ER (metric) Standard
Collet range is 0,5 mm for 8ER and
11ER and 1 mm for 16ER and others.
l/d
13,5 / 8,5
ER8
l/d
18,5 / 11,5
ER11
l/d
27,5 / 17,0
ER16
l/d
31,5 / 21,0
ER20
l/d
34,0 / 26,0
ER25
8ER010M
8ER015M
8ER020M
8ER025M
8ER030M
8ER035M
8ER040M
8ER045M
8ER050M
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
8ERS000M
ER8 collet set
9 pieces
1 mm - 5 mm
(0,5 mm sizes)
11ER010M
11ER015M
11ER020M
11ER025M
11ER030M
11ER035M
11ER040M
11ER045M
11ER050M
11ER055M
11ER060M
11ER065M
11ER070M
—
—
—
—
—
—
—
—
—
—
—
11ERS000M
ER11 collet set
13 pieces
1 mm - 7 mm
(0,5 mm sizes)
16ER010M
16ER015M
16ER020M
16ER025M
16ER030M
16ER035M
16ER040M
16ER045M
16ER050M
16ER055M
16ER060M
16ER065M
16ER070M
16ER075M
16ER080M
16ER085M
16ER090M
16ER095M
16ER100M
—
—
—
—
—
16ERS000M
ER16 collet set
10 pieces
1 mm - 10 mm
(1 mm sizes)
20ER010M
—
20ER020M
—
20ER030M
—
20ER040M
—
20ER050M
—
20ER060M
—
20ER070M
—
20ER080M
—
20ER090M
—
20ER100M
—
20ER110M
—
20ER120M
—
20ERS000M
ER20 collet set
12 pieces
2 mm - 13 mm
(1 mm sizes)
—
—
25ER020M
—
25ER030M
—
25ER040M
—
25ER050M
—
25ER060M
—
25ER070M
—
25ER080M
—
25ER090M
—
25ER100M
—
25ER110M
—
25ER120M
—
25ERS000M
ER25 collet set
15 pieces
2 mm - 16 mm
(1 mm sizes)
l/d
13,5 / 8,5
ER8
l/d
18,5 / 11,5
ER11
l/d
27,5 / 17,0
ER16
l/d
31,5 / 21,0
ER20
l/d
34,0 / 26,0
ER25
Ø
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16ER0062
16ER0094
16ER0125
16ER0156
16ER0188
16ER0219
16ER0250
16ER0281
16ER0312
16ER0344
16ER0375
16ER0406
—
—
—
—
20ER0062
—
20ER0125
—
20ER0188
—
20ER0250
—
20ER0312
—
20ER0375
—
20ER0438
20ER0500
—
—
25ER0062
—
25ER0125
—
25ER0188
—
25ER0250
—
25ER0312
—
25ER0375
—
25ER0438
25ER0500
25ER0562
25ER0625
1/16
3/32
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
1/2
9/16
5/8
Ø
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
11,5
12,0
12,5
collet sets
Ø
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
5,0
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,0
9,5
10,0
10,5
11,0
11,5
12,0
12,5
ER (inch) Standard
Ø
1/16
3/32
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
1/2
9/16
5/8
287
Collets
®
DIN 6499 form B
• For DIN 371-374-376 and inch taps.
ER (metric and inch) Standard Tapping Collets
tap
size
l / d (mm)
27,50 / 17
16ER
l / d (mm)
31,50 / 21
20ER
l / d (mm)
43 / 26
25ER
16ERTC045034M
16ERTC055043M
16ERTC060049M
16ERTC070055M
—
—
—
—
—
—
—
—
—
—
—
—
—
25ERTC070055M
25ERTC080062M
25ERTC090070M
25ERTC100080M
4,5 x 3,4 mm
5,5 x 4,3 mm
6,0 x 4,9 mm
7,0 x 5,5 mm
8,0 x 6,2 mm
9,0 x 7,0 mm
10,0 x 8,0 mm
16ERTC8
16ERTC10
16ERTC12
16ERTC025
—
—
20ERTC8
20ERTC10
20ERTC12
20ERTC025
20ERTC031
20ERTC037
25ERTC8
25ERTC10
25ERTC12
25ERTC025
25ERTC031
25ERTC037
#8 H.T.
#10 H.T.
#12 H.T.
1/4 H.T.
5/16 H.T.
3/8 H.T.
tap
size
metric
4,5 x 3,4 mm
5,5 x 4,3 mm
6,0 x 4,9 mm
7,0 x 5,5 mm
8,0 x 6,2 mm
9,0 x 7,0 mm
10,0 x 8,0 mm
inch
#8 H.T.
#10 H.T.
#12 H.T.
1/4 H.T.
5/16 H.T.
3/8 H.T.
ER (inch) Tension Tapping Collets
tap
size
T-tension
l/d
18 / 11,4
12ER
5,5 mm
l/d
22 / 17
16ER
7 mm
l/d
24 / 21
20ER
7 mm
l/d
26 / 26
25ER
8 mm
tap
size
T-tension
#0 - #6 H.T.
#8 H.T.
#10 H.T.
#12 H.T.
1/4 H.T.
5/16 H.T.
3/8 H.T.
12ERTCT6*
—
—
—
—
—
—
16ERTCT6
16ERTCT8
16ERTCT10
—
—
—
—
20ERTCT6
20ERTCT8
20ERTCT10
20ERTCT12
20ERTCT025
—
—
25ERTCT6
25ERTCT8
25ERTCT10
25ERTCT12
25ERTCT025
25ERTCT031
25ERTCT037
#0 - #6 H.T.
#8 H.T.
#10 H.T.
#12 H.T.
1/4 H.T.
5/16 H.T.
3/8 H.T.
* Fits 11ER chucks.
288
Collets
Single Angle – Tremendous Grip
TG (metric) Standard
Ø
1,50
2,00
2,50
3,00
3,50
4,00
4,50
5,00
5,50
6,00
6,50
7,00
7,50
8,00
8,50
9,00
9,50
10,00
10,50
11,00
11,50
12,00
12,50
TG 50
d1 = 19,30
l1 = 36,53
50TG015M
50TG020M
50TG025M
50TG030M
50TG035M
50TG040M
50TG045M
50TG050M
50TG055M
50TG060M
50TG065M
50TG070M
50TG075M
50TG080M
50TG085M
50TG090M
50TG095M
50TG100M
50TG105M
50TG110M
50TG115M
50TG120M
50TG125M
TG 75
d1 = 26,98
l1 = 46,84
—
—
—
75TG030M
75TG035M
75TG040M
75TG045M
75TG050M
75TG055M
75TG060M
75TG065M
75TG070M
75TG075M
75TG080M
75TG085M
75TG090M
75TG095M
75TG100M
75TG105M
75TG110M
75TG115M
75TG120M
75TG125M
TG 100
d1 = 35,03
l1 = 60,33
—
—
—
100TG030M
100TG035M
100TG040M
100TG045M
100TG050M
100TG055M
100TG060M
100TG065M
100TG070M
100TG075M
100TG080M
100TG085M
100TG090M
100TG095M
100TG100M
100TG105M
100TG110M
100TG115M
100TG120M
100TG125M
TG 50
d1 = 19,30
l1 = 36,53
50TGC060M
50TGC080M
50TGC100M
50TGC120M
TG 75
d1 = 26,98
l1 = 46,84
75TGC060M
75TGC080M
75TGC100M
75TGC120M
TG 100
d1 = 35,03
l1 = 60,33
—
—
100TGC100M
100TGC120M
Ø
1,50
2,00
2,50
3,00
3,50
4,00
4,50
5,00
5,50
6,00
6,50
7,00
7,50
8,00
8,50
9,00
9,50
10,00
10,50
11,00
11,50
12,00
12,50
High Precision collets available (TGHP).
TG (metric) Coolant
Ø
6,00
8,00
10,00
12,00
Ø
6,00
8,00
10,00
12,00
Coolant High Precision collets available (TGCHP).
289
Collets
®
TG (inch) Standard
Ø
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
High Precision collets available (TGHP).
290
TG 50
d1 = .760
l1 = 1.438
50TG0047
50TG0062
50TG0078
50TG0094
50TG0109
50TG0125
50TG0141
50TG0156
50TG0172
50TG0188
50TG0203
50TG0219
50TG0234
50TG0250
50TG0266
50TG0281
50TG0297
50TG0312
50TG0328
50TG0344
50TG0359
50TG0375
50TG0391
50TG0406
50TG0422
50TG0438
50TG0453
50TG0469
50TG0484
50TG0500
TG 75
d1 = 1.062
l1 = 1.844
—
75TG0062
75TG0078
75TG0094
75TG0109
75TG0125
75TG0141
75TG0156
75TG0172
75TG0188
75TG0203
75TG0219
75TG0234
75TG0250
75TG0266
75TG0281
75TG0297
75TG0312
75TG0328
75TG0344
75TG0359
75TG0375
75TG0391
75TG0406
75TG0422
75TG0438
75TG0453
75TG0469
75TG0484
75TG0500
TG 100
d1 = 1.379
l1 = 2.375
—
—
—
100TG0094
100TG0109
100TG0125
100TG0141
100TG0156
100TG0172
100TG0188
100TG0203
100TG0219
100TG0234
100TG0250
100TG0266
100TG0281
100TG0297
100TG0312
100TG0328
100TG0344
100TG0359
100TG0375
100TG0391
100TG0406
100TG0422
100TG0438
100TG0453
100TG0469
100TG0484
100TG0500
Ø
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
Collets
TG (inch) Coolant
Ø
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
TG 50
d1 = .760
l1 = 1.438
50TGC0125
50TGC0141
50TGC0156
50TGC0172
50TGC0188
50TGC0203
50TGC0219
50TGC0234
50TGC0250
50TGC0266
50TGC0281
50TGC0297
50TGC0312
50TGC0328
50TGC0344
50TGC0359
50TGC0375
50TGC0391
50TGC0406
50TGC0422
50TGC0438
50TGC0453
50TGC0469
50TGC0484
50TGC0500
TG 75
d1 = 1.062
l1 = 1.844
—
—
—
—
—
—
—
—
75TGC0250
75TGC0266
75TGC0281
75TGC0297
75TGC0312
75TGC0328
75TGC0344
75TGC0359
75TGC0375
75TGC0391
75TGC0406
75TGC0422
75TGC0438
75TGC0453
75TGC0469
75TGC0484
75TGC0500
TG 100
d1 = 1.379
l1 = 2.375
—
—
—
—
—
—
—
—
100TGC0250
100TGC0266
100TGC0281
100TGC0297
100TGC0312
100TGC0328
100TGC0344
100TGC0359
100TGC0375
100TGC0391
100TGC0406
100TGC0422
100TGC0438
100TGC0453
100TGC0469
100TGC0484
100TGC0500
Ø
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
Coolant High Precision collets available (TGCHP).
TG (inch) Standard Sets
catalog number
collet series
S75TG1SET
S75TG2SET
S75TG3SET
S75TG4SET
S100TG1SET
S100TG2SET
S100TG3SET
S100TG4SET
75TG
75TG
75TG
75TG
100TG
100TG
100TG
100TG
contents of collet sets
45 collets - 1/16" through 3/4" in 1/64" increments
59 collets - 3/32" through 1" in 1/64" increments
291
Collets
®
TGST (inch) Tapping Collets
catalog number
hand tap
size
d1
Ø
l1
l2
s1
50TGST6
50TGST8
50TGST10
50TGST12
50TGST025
50TGST031
50TGST037
#0-#6
#8
#10
#12
#14-1/4
.3125
.375
.760
.760
.760
.760
.760
.760
.760
.141
.168
.194
.220
.255
.318
.381
1.438
1.438
1.438
1.438
1.438
1.438
1.438
.775
.775
.900
.807
.838
.868
.900
.110
.131
.152
.165
.191
.238
.286
.10
.10
.10
.10
.10
.10
.10
.760
.760
.313
.438
1.438
1.438
.775
.775
.234
.328
.10
.10
1.062
1.062
1.062
1.062
1.062
1.062
1.062
.141
.168
.194
.220
.255
.318
.381
1.843
1.843
1.843
1.843
1.843
1.843
1.843
.775
.775
.900
.807
.838
.868
.900
.110
.131
.152
.165
.191
.238
.286
.26
.26
.26
.26
.26
.26
.26
1.062
1.062
1.062
1.062
.313
.438
.563
.700
1.843
1.843
1.843
1.843
.775
.775
.775
.775
.234
.328
.421
.531
.26
.26
.26
.26
1.379
1.379
1.379
1.379
1.379
1.379
1.379
.141
.168
.194
.220
.255
.318
.381
2.375
2.375
2.375
2.375
2.375
2.375
2.375
.812
.812
.900
.812
.812
.868
.900
.110
.131
.152
.165
.191
.238
.286
.52
.52
.52
.52
.52
.52
.52
1.379
1.379
1.379
1.379
.313
.438
.563
.700
2.375
2.375
2.375
2.375
.812
.812
.812
.812
.234
.328
.421
.531
.52
.52
.52
.52
pipe tap size
50TGST006P
50TGST012P
1/16 & 1/8P (SS)
1/8P (LS)
hand tap size
75TGST6
75TGST8
75TGST10
75TGST12
75TGST025
75TGST031
75TGST037
#0-#6
#8
#10
#12
#14-1/4
.3125
.375
pipe tap size
75TGST006P
75TGST012P
75TGST025P
75TGST037P
1/16 & 1/8P (SS)
1/8P (LS)
1/4P
3/8P
hand tap size
100TGST6
100TGST8
100TGST10
100TGST12
100TGST025
100TGST031
100TGST037
#0-#6
#8
#10
#12
#14-1/4
.3125
.375
pipe tap size
100TGST006P
100TGST012P
100TGST025P
100TGST037P
292
1/16 & 1/8P (SS)
1/8P (LS)
1/4P
3/8P
Collets
TGST (metric) Tapping Collets
catalog number
50TGST025020M
50TGST025021M
50TGST028021M
50TGST028022M
50TGST032025M
50TGST035027M
50TGST036028M
50TGST040030M
50TGST040032M
50TGST045034M
50TGST045036M
50TGST050040M
50TGST056045M
50TGST060049M
50TGST063050M
50TGST070055M
50TGST071056M
50TGST080062M
50TGST080063M
50TGST090070M
50TGST090071M
50TGST100080M
50TGST110090M
100TGST080063M
100TGST090071M
100TGST100080M
100TGST110090M
hand tap
size
d1
Ø
l1
l2
s1
M1,M2
M1,M1.8,M3,M3.5
M2,M2.6,M4
M2.2,M2.5
M3
M3,M5
M3.5
M3.5
M4
M4,M6
M4.5
M5
12 UNC/UNF
M5,M6,M7,M8
M6
M10
M7
M8
M8,M11,1/8 BSP
M12
M9,M12
M10
M14
M8,M11,1/8 BSP
M9,M12
M10
M14
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
19,30
35,02
35,02
35,02
35,02
2,50
2,50
2,80
2,80
3,15
3,50
3,55
4,00
4,00
4,50
4,50
5,00
5,60
6,00
6,30
7,00
7,10
8,00
8,00
9,00
9,00
10,00
11,00
8,00
9,00
10,00
11,00
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
36,52
60,32
60,32
60,32
60,32
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
17,00
30,00
30,00
30,00
30,00
2,00
2,10
2,10
2,24
2,50
2,70
2,80
3,00
3,15
3,40
3,55
4,00
4,50
4,90
5,00
5,50
5,60
6,20
6,30
7,00
7,10
8,00
9,00
6,30
7,10
8,00
9,00
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.10
.52
.52
.52
.52
TGST Collet Sets
set
catalog number
S38TGSTSET-TC/RV
S50TGSTSET-RV
S50TGSTSET-TC
S50TGSTSET-S
S75TGSTSET-TC
set contents
use with
TC- & RV-style tap chucks
RV-style tap chucks
TC-style tap chucks
solid tap chucks
TC-style tap chucks
(7 collets) #6 through 1/4 hand tap 1/16 NP, 1/8 NP (SS)
(9 collets) #10 through 1/2 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS)
(15 collets) #10 through 3/4 hand tap 1/16 NP, 1/8 NP (SS) & 1/8 NP (LS), 1/4 NP, 3/8 NP
NOTE: For through-coolant collets (sealed slots) add “C” to part number (e.g. – 50TGST C 025).
293
Collets
®
TGST (inch) Coolant Tapping Collets
catalog number
hand tap
size
d1
Ø
l1
l2
s1
50TGSTC025
50TGSTC031
50TGSTC037
50TGSTC043
50TGSTC050
1/4
5/16
3/8
7/16
1/2
.760
.760
.760
.760
.760
.255
.318
.381
.323
.367
1.438
1.438
1.438
1.438
1.438
.838
.868
.900
.963
.932
.191
.238
.286
.242
.275
.10
.10
.10
.10
.10
.760
.760
.313
.438
1.438
1.438
.775
.775
.234
.328
.10
.10
1.062
1.062
1.062
1.062
1.062
.255
.318
.381
.323
.367
1.843
1.843
1.843
1.843
1.843
.838
.868
.900
.963
.932
.191
.238
.286
.242
.275
.26
.26
.26
.26
.26
1.062
1.062
1.062
1.062
1.062
.313
.438
.563
.700
.688
1.843
1.843
1.843
1.843
1.843
.775
.775
.775
.775
.775
.234
.328
.421
.531
.515
.26
.26
.26
.26
.26
1.379
1.379
1.379
1.379
1.379
.255
.318
.381
.323
.367
2.375
2.375
2.375
2.375
2.375
.812
.868
.900
.963
.932
.191
.238
.286
.242
.275
.52
.52
.52
.52
.52
1.379
1.379
1.379
1.379
1.379
.313
.438
.563
.700
.688
2.375
2.375
2.375
2.375
2.375
.812
.812
.812
.812
.812
.234
.328
.421
.531
.515
.52
.52
.52
.52
.52
pipe tap size
50TGSTC006P
50TGSTC012P
1/16P
1/8P
hand tap size
75TGSTC025
75TGSTC031
75TGSTC037
75TGSTC043
75TGSTC050
1/4
5/16
3/8
7/16
1/2
pipe tap size
75TGSTC006P
75TGSTC012P
75TGSTC025P
75TGSTC037P
75TGSTC050P
1/16P
1/8P
1/4P
3/8P
1/2P
hand tap size
100TGSTC025
100TGSTC031
100TGSTC037
100TGSTC043
100TGSTC050
1/4
5/16
3/8
7/16
1/2
pipe tap size
100TGSTC006P
100TGSTC012P
100TGSTC025P
100TGSTC037P
100TGSTC050P
294
1/16P
1/8P
1/4P
3/8P
1/2P
Index
A
A-LSE
A-NE
A-STF
A-STL
A..NNT
A2
A2-CF
A2-CM
A2-CR
A3-DF
A3-DM
A3-DM
A3-DR
A3DS
A3PS/A3US
A3SC
A3SM/A3SS
ABD
AGD
APD
ATBI
ATD
Laydown Threading Bar . . . . . . . . . . . . . . . . . . . . . . 196
Top Notch Threading & Grooving Boring Bar. . . . . . . 192
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
KM Micro Cutting Unit A2 Blade - Cutoff . . . . . . . . . . 157
A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
A2 Cutoff Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
A3 Deep Grooving Insert . . . . . . . . . . . . . . . . . . . . . 115
A3 Deep Grooving Insert (35-Degree Profiling) . . . . . 116
A3 Integral Shank Profiling Toolholder. . . . . . . . . . . . 175
A3 Integral Shank Profiling Toolholder. . . . . . . . . . . . 175
Square Shank Toolholder for A2 Cutoff Insert . . . . . . 176
A3 Deep Grooving and Profiling Toolholder . . . . . . . . 174
Micro Boring A-Series Insert. . . . . . . . . . . . . . . . . . . 132
Micro Boring Bar (A-Series) . . . . . . . . . . . . . . . . . . . 200
B
B105
B221
BB
BNEC
BP
BPGF
BS
BT10
BT6
BT7
BT8
BT9
BW078
Dynapoint TF Drills without Coolant . . . . . . . . . . 221-222
Dynapoint SE Drills without Coolant. . . . . . . . . . 226-228
Micro Boring B-Series Insert. . . . . . . . . . . . . . . . . . . 133
High-Performance Solid Carbide
End Mills (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Micro Boring B-Series Insert. . . . . . . . . . . . . . . . . . . 133
Positive Boring Insert (Kendex Mini) . . . . . . . . . . . . . . 64
Micro Boring Bar (B-Series) . . . . . . . . . . . . . . . . . . . 200
Micro Boring Bar Accessories. . . . . . . . . . . . . . . . . . 217
C
C-CSE
C-KBF
C-KBL
C-SCF
C-SCL
C-SG
C-STF
C-STL
C-SWU
CCGT-HP
CCGT-LF
CCMT-11
CCMT-FW
CCMT-LF
CCMT-MF
CCMT-MW
CCMT-UF
CCMW(-F)
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Kendex Mini Boring Bar . . . . . . . . . . . . . . . . . . . . . . 187
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
CDC
CDG
CDHB
CDHH
CDT
CH110
CN130
CNGA-(S)
CNGG-LF
CNGP
CNMA
CNMG-FF
CNMG-FN
CNMG-FP
CNMG-FW
CNMG-MN
CNMG-MP
CNMG-MW
CNMS(-F)
CPCA
CPG
CPGB(-F)
CPGM(-F)
CPGT-HP
CPGT-LF
CPGT-UF
CPGW(-F)
CPMT-FW
CPMT-LF
CPMT-MF
CPMT-MW
CPMT-UF
CPMW(-F)
CPT
CR100
CRHEC
CS120
CTS30
CV-KM-ECTRA
CV-KM-TRA
General Purpose Solid Carbide Drills . . . . . . . . . . . . 238
Micro Boring Indexable Insert . . . . . . . . . . . . . . . . . . 135
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 46, 134
General Purpose Solid Carbide Drills. . . . . . . . . 233-235
General Purpose Solid Carbide Drills . . . . . . . . . . . . 238
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
High-Performance Solid Carbide End Mills (Inch) . . . 264
KM Micro Systems Tooling (Presetter) . . . . . . . . . . . 159
KM Micro Systems Tooling (Presetter) . . . . . . . . . . . 159
D
DA
DA
DBNEC
DCGT-HP
DCGT-LF
DCMT-11
DCMT-LF
DCMT-MF
DCMT-UF
DCMW(-F)
DHEC
DNGA(-S)
DNGG-LF
DNGP
DNMG-FF
DNMG-FN
DNMG-FP
DNMG-FW
Double Angle Collet (Inch) . . . . . . . . . . . . . . . . . . . . 284
Double Angle Collet (Metric) . . . . . . . . . . . . . . . . . . . 284
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
295
Index
DNMG-MN
DNMG-MP
DNMG-MW
DNMS(-F)
DPGT-HP
DPGT-LF
DPGW-F
DPMT-LF
DPMT-MF
DPMT-UF
DPMW(-F)
DRIVER
DT
®
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Torx Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
ER Collet (Metric). . . . . . . . . . . . . . . . . . . . . . . . . . . 287
ER Collet (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
ER (Metric and Inch) Standard Tap Collets . . . . . . . . 288
ER (Inch) Tension Tapping Collets. . . . . . . . . . . . . . . 288
F
F2AA
F2AH
F2AL
F3AA
F3AH
F4AJ
F4AL
FT
High-Performance Solid Carbide End Mills (Metric) . . 267
High Performance Solid Carbide End Mills (Metric) . . 268
Torx Flag-Type Wrench . . . . . . . . . . . . . . . . . . . . . . . 162
G
GPCD
K-MS
K-NI
K-NI
296
K-SS
K-SS
K-SS
K-TI
K-TI
K105
K222
KC
KM-A2S
KM-A3S
KM-BN
KM-BS
KM-ER
KM-LCM
KM-LSS
KM-MCL
KM-MDJ
KM-MSD
KM-MTG
KM-NCM
KM-NCM-SEF
KM-NCM-SF
KM-NCM-SS
KM-NE
KM-NS
KM-NSPKG
Double Angle J-Series Reamer Collets (Inch) . . . . . . 286
Double Angle Tap Collet (J-Series, Inch) . . . . . . . . . . 285
K
K-AA
K-AA
K-NI
KM-NKL
KM-NRPKG
J
J-NE
J-NE-S
JRC
JTC
K-NI
H
HEC
HHSEC
K-NI
K-SS
K-TI
E
E-CBF
E-CBL
E-LSE
E-NE
E-SCF
E-SCL
E-STF
E-STL
E..NNT
ER
ER
ERTC
ERTCT
K-NI
High-Performance Taps (Straight Flute, Plug) . . . . . . 253
High-Performance Taps (Straight Flute,
Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
High-Performance Taps (Mold Hand Tap) . . . . . . . . . 252
High-Performance Taps (Spiral Point, Plug). . . . . . . . 246
High-Performance Taps (Spiral Flute,
Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
KM-P
KM-RCM
KM-SCG
KM-SCL
KM-SCM
KM-SDG
KM-SDJ
KM-SDP
KM-SSP
KM-STG
KM-STG
KM-STJ
KM-STP
Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
High-Performance Taps (STI Spiral
Point, Plug). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Flute, Modified Bottom). . . . . . . . . . . . . . . . . . . . . . . 250
Flute, Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . 251
High-Performance Taps (Spiral Point, Plug) . . . . 240-241
Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . 242-243
Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
High-Performance Taps (Spiral Flute, Pipe) . . . . . . . . 245
High-Performance Taps (LHS/RHC Spiral Flute,
Plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
High-Performance Taps (RHS Spiral Flute,
Modified Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
High-Performance Taps (RHS Spiral Flute,
Full Bottom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Dynapoint TF Drills without Coolant . . . . . . . . . . 223-224
Dynapoint SE Drills without Coolant . . . . . . . . . . . . . 229
Micro Boring Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . 217
KM Micro Cutting Unit (A2 Integral Cutoff) . . . . . . . . 156
KM Micro Cutting Unit (A3 Deep Grooving). . . . . . . . 155
KM Micro Systems Tooling (Blank) . . . . . . . . . . . . . . 160
KM Micro Cutting Unit (A2 Modular Cutoff) . . . . . . . . 157
KM Micro Systems Tooling (ER Collet Chuck) . . . . . . 158
KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . . . . . 141
KM Micro Cutting Unit (Laydown Threading) . . . . . . . 155
KM Micro Cutting Unit (Kenloc). . . . . . . . . . . . . . . . . 144
KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . 142-143
KM Micro Clamping Unit . . . . . . . . . . . . . . . . . . 142-143
KM Micro Cutting Unit (Top Notch
Threading & Grooving) . . . . . . . . . . . . . . . . . . . . . . . 154
KM Micro Cutting Unit (Top Notch Profiling) . . . . . . . 151
(Spares and Accessories). . . . . . . . . . . . . . . . . . . . . 161
KM Micro Cutting Unit
(Top Notch Threading & Grooving) . . . . . . . . . . . . . . 154
(Spares and Accessories). . . . . . . . . . . . . . . . . . . . . 161
KM Micro Systems Tooling (Plug) . . . . . . . . . . . . . . . 160
KM Micro Cutting Unit (Screw-On) . . . . . . . . . . . . . . 146
KM Micro Cutting Unit (Laydown Backturning) . . . . . 152
KM Micro Cutting Unit (On-Edge Grooving). . . . . . . . 153
KM Micro Cutting Unit (On-Edge Backturning) . . . . . 152
Index
KM-STT
KM-SVG
KM-SVG
KM-SVJ
KM-SWL
KM-TIM
KRC
KT
KTC
KWCD
KM Micro Cutting Unit (On-Edge Threading) . . . . . . . 153
KM Micro Cutting Unit Integral Cutoff . . . . . . . . . . . . 156
KM Micro Systems Tooling (Timing Heads) . . . . . . . . 158
Double Angle K-Series Reamer Collets (Inch). . . . . . 286
Torx Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Double Angle Tap Collet (K-Series, Inch) . . . . . . . . . 285
L
LRC
LSA
LT-ER-60CB
LT-ER-ISOCB
LT-ER-NPTCB
LT-ER-NPTFCB
LT-ER-UNCB
LT-ER-WCB
LT-ER/L-55
LT-ER/L-60
LT-ER/L-BSPT
LT-ER/L-ISO
LT-ER/L-NPT
LT-ER/L-NPTF
LT-ER/L-UN
LT-ER/L-UNJ
LT-ER/L-W
LT-NR-60CB
LT-NR-ISOCB
LT-NR-NPTCB
LT-NR-UNCB
LT-NR-WCB
LT-NR/L-55
LT-NR/L-60
LT-NR/L-BSPT
LT-NR/L-ISO
LT-NR/L-NPT
LT-NR/L-NPTF
LT-NR/L-UN
LT-NR/L-UNJ
LT-NR/L-W
LTC
Double Angle L-Series Reamer Collets (Inch) . . . . . . 286
LT Threading Toolholder . . . . . . . . . . . . . . . . . . . . . . 173
LT Threading Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Double Angle Tap Collet (L-Series, Inch). . . . . . . . . . 286
N
NAS
NB
NBD
NDC-V (NPT)
NF
NF-K
NFD-K
NFD-KI
NG
NG-K
NG1L
NGD
NGD-K
Top Notch Threading, Grooving, and
Backturning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Top Notch Grooving Insert . . . . . . . . . . . . . . . . . . . . 110
Top Notch Threading Insert. . . . . . . . . . . . . . . . . . . . . 76
Top Notch Grooving Insert . . . . . . . . . . . . . . . . 104-105
NGP
NJ
NJF
NJK
NJP
NKL-F
NP-K
NPD-K
NPGR
NPR/L
NR
NR-K
NRD
NRP
NT
NT-1L
NT-K
NTC
NTF
NTK
NTP
NU
NV
NWC
Top Notch Profiling Toolholder. . . . . . . . . . . . . . . . . . 171
Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63
Top Notch Profiling Insert (Parallelogram) . . . . . . . . . . 63
S
S-CBF
S-CBL
S-CSE
S-DT-SET
S-FT-SET
S-GT-SET
S-HT-SET
S-KBF
S-KBL
S-LSE
S-LT-SET
S-SCF
S-SCL
S-SG
S-SGR
S-STF
S-STF-E
S-STL
S-STL-E
S-SWU
S-TGSET
S-TGSTSET
S10P
SCAC
SCGT-LF
SCLC-F
SCMT-11
SCMT-LF
SCMT-MF
SCMT-UF
SDAC
SDJC-F
SDPC
SLEC
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Tap Collet Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Micro Boring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Single Angle TG Collet Set . . . . . . . . . . . . . . . . . . . . 291
Single Angle Tapping Collet Set . . . . . . . . . . . . . . . . 293
Swiss-Style Tooling Insert . . . . . . . . . . . . . . . . . . . . . 128
Screw-On Toolholder . . . . . . . . . . . . . . . . . . . . . . . . 166
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
297
Index
SM-YE
SM-YI
SNGG-LF
SNGP
SNMG-FF
SNMG-FN
SNMG-FP
SNMG-FW
SNMG-MN
SNMG-MP
SNMG-MW
SNMS(-F)
SPGH
SPGT-LF
SPMT-LF
SPMT-MF
SPMT-UF
SS-AF
SS-DA
SS-DA
SS-DA
SS-DP
SS-ER
SS-FC
SS-RD
SS-SRTG
SS-TC
SS-TG
SS-TO
SSP
STAC
STG
STJC-F
STP
STT
SVAB
SVG
SVJB-F
SWLC-F
®
LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
LT Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Double Angle Adjustable Flange Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Double Angle ’01-Style Collet Chucks Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Double Angle Floating Holder - Straight Shank . . . . . 280
ER-Style DIN 6499 Collet Chucks Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Double Angle Floating Holder - Straight Shank . . . . . 281
Double Angle ’08-Style Floating Holder Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
TG-Style Tap Chucks (Self Releasing) Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Double Angle Tap Chucks (Tenn. & Compress.) Straight Shank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
TG-Style Collet Chucks - Straight Shank. . . . . . . . . . 276
Double Angle Tap Chucks (Tension Only) Straight Shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Laydown Backturning Toolholder. . . . . . . . . . . . . . . . 179
On-Edge Grooving Toolholder. . . . . . . . . . . . . . . . . . 182
On-Edge Backturning Toolholder. . . . . . . . . . . . . . . . 180
On-Edge Threading Toolholder . . . . . . . . . . . . . . . . . 181
On-Edge Cutoff Toolholder . . . . . . . . . . . . . . . . . . . . 183
T
T02P
T20G
T30T
TCGT-HP
TCGT-LF
TCMT-11
TCMT-LF
TCMT-MF
TCMT-UF
TCMW(-F)
298
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
TD-P
TDHB
TDHH
TG
TG
TGC
TGC
TGST
TGST
TGSTC
TNGG-LF
TNGP
TNMG-FF
TNMG-FN
TNMG-FP
TNMG-FW
TNMG-MN
TNMG-MP
TNMG-MW
TNMS(-F)
TPCB
TPCG
TPCH
TPGH
TPGM(-F)
TPGT-HP
TPGT-LF
TPGW(-F)
TPMT-LF
TPMT-MF
TPMT-UF
TT
TWS
TWT
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 55, 137
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . 55, 136
Single Angle TG Collet (Metric). . . . . . . . . . . . . . . . . 289
Single Angle TG Collet (Inch) . . . . . . . . . . . . . . . . . . 290
Single Angle TG Collet - Coolant (Metric) . . . . . . . . . 289
Single Angle TG Collet - Coolant (Inch). . . . . . . . . . . 291
Single Angle Tapping Collet (Inch) . . . . . . . . . . . . . . 292
Single Angle Tapping Collet (Metric) . . . . . . . . . . . . . 293
Single Angle Tapping Collet - Coolant (Inch) . . . . . . . 294
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Torx T-Handle Wrench. . . . . . . . . . . . . . . . . . . . . . . . 162
Torx Driver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
U
UNILEVEL
V
V10G
VBGT-HP
VBGT-LF
VBGW-F
VBMT-11
VBMT-LF
VPGP
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
W
WCMT-LF
WNGG-LF
WNMG-FF
WNMG-FN
WNMG-FP
WNMG-FW
WNMG-MN
WNMG-MP
WNMG-MW
WPGT
WPMT-LF
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Kenloc Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Screw-On Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Metalcutting Safety
(Please read this before using
products listed in this catalog.)
consulted. Obtain from Kennametal and read the applicable
Material Safety Data Sheet before grinding.
Modern metalcutting operations involve high energy, high
spindle or cutter speeds, and high temperatures and cutting
forces. Hot, flying chips may be projected from the workpiece
during metalcutting. Although advanced cutting tool materials
are designed and manufactured to withstand the high cutting
forces and temperatures that normally occur in these
operations, they are susceptible to fragmentating in service,
particularly if they are subjected to over-stress, severe impact or
are otherwise abused. Therefore, precautions should be taken to
adequately protect workers, observers and equipment against
hot, flying chips, fragmented cutting tools, broken workpieces or
other similar projectiles. Machines should be fully guarded and
personal protective equipment should be used at all times.
Cutting tools are only one part of the worker-machine tool
system. Many variables exist in machining operations, including:
metal removal rate; workpiece size, shape, strength and rigidity;
chucking and fixturing; the load carrying capability of centers;
cutter and spindle speed and torque limitations; the holder and
boring bar overhang; available power, and the condition of the
tooling and the machine. A safe metalcutting operation must
take all of these variables, and others, into consideration.
When grinding carbide or other advanced cutting tool materials,
a suitable means for collection and disposal of dust, mist or
sludge should be provided. Overexposure to dust or mist
containing metallic particles can be hazardous to health,
particularly if exposure continues over an extended period of
time, and may cause eye, skin and mucous membrane irritation
and temporary or permanent respiratory disease. Certain
existing pulmonary and skin conditions may be aggravated by
exposure to dust or mist. Adequate ventilation, respiratory
protection and eye protection should be provided when grinding,
and workers should avoid breathing of and prolonged skin
contact with dust or mist. General Industry Safety and Health
Regulations, Part 1910, U.S. Department of Labor, published
in Title 29 of the Code of Federal Regulations should be
Kennametal has no control over the end use of its products
or the environment into which those products are placed.
Kennametal urges that its customers adhere to the
recommended standards of use of their metalcutting machines
and tools, and that they follow procedures that ensure safe
metalcutting operations. The technical information included
throughout this catalog, as well as recommendations on
machining practices referred to herein are only advisory in
nature and do not constitute representations or warranties and
are not necessarily appropriate for any particular work
environment or application.
For more information, we suggest you obtain Kennametal’s
Metalcutting Safety booklet, if you do not already have one.
Quantities of safety booklets and Material Safety Data Sheets
may be obtained free from the Kennametal Corporate
Compliance Office at 724-539-5747, or fax 724-539-5439.
For product safety and environmental inquiries, contact our
Corporate Environmental Health and Safety Office at
724-539-5631 or fax 724-539-5372.
Kennametal, the block-style K, “Kennametal.The Metalcutting Authority.”, KENNA PERFECT, Kenloc, Kendex, Top Notch, A3, A2, KENNA UNIVERSAL, KC,
KC9125, KC9110, KT, KT315, KC9040, KC9225, KC9315, KC8050, KC5010, KC9240, KC9245, KC5025, KD, KD100, KC5410, K, K313, KC730, KC9215, K68,
KD050, KD120, KC720, K420, KMF, KC5035, KT5135, KC610, KB, KB5625, KM, KM Micro, K-Lock, Kenclamp, Wedgelock, Dynapoint, TF, SE, KC7210, K10, CS5,
KC7215, K600, K-SS, K-NI, K-MS, K-AA, K-TI, KC610M, K600, KC635M, KC631M, KC633M, and KC625M are trademarks of Kennametal Inc., and are used as
such herein. The absence of a product, service name, or logo from this list does not constitute a waiver of Kennametal’s trademark or other intellectual property
rights concerning that name or logo.
Torx is a registered trademark of the Camcar Division of Textron Inc.
Copyright 2002 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.
299
R
KENNAMETAL ONLINE
APPLICATION SUPPORT TECH LINE
Visit www.kennametal.com for
Get the industry’s finest technical and
instant access to the products
product-application advice FREE! Our
and technical application
problem-solving/troubleshooting
information that will significantly
boost your turning, milling,
that your Kennametal tools
and holemaking productivity
provide optimum performance.
and profitability - in all
USA and Canada: 800/835-3668
outside USA and Canada: 724/539-6921
www.kennametal.com
Monday-Friday: 7am-7pm
A01-135-(22)E2
Kennametal Inc.
Metalworking Systems Division
P.O. Box 231
Latrobe, PA 15650
Customer Service
(United States and Canada) Phone
800-446-7738
KENNAMETAL UNIVERSITY
Learn the skills to optimize your
metalcutting performance during
our unique, five-day application
engineering course!
Call or visit us at
www.kennametal.com, to request
brochure A98-181... or to find out
more about our campus and courses.
Printed in U.S.A.
PRSRT STD
AUTO
U.S. POSTAGE PAID
LATROBE, PA
PERMIT NO. 64
R
KENNAMETAL ONLINE
www.kennametal.com
A01-135-(22)E2
Kennametal Ltd.
6497 Edwards Blvd.
Mississauga, Ontario L5T 2V2
Customer Service
(United States and Canada) Phone
800-446-7738
engineering course!
Call or visit us at
Printed in U.S.A.
R
KENNAMETAL ONLINE
www.kennametal.com
engineering course!
Call or visit us at
A01-135-(22)E2
Kennametal Inc.
Metalworking Systems Division
P.O. Box 231
Latrobe, PA 15650
Printed in U.S.A.

Micro Machining Tooling

Transcription

Similar documents

Kennametal 2013 Master Catalog — Grooving and Cut

KENNA PERFECT® Insert Selection System

Kennametal 2013 Master Catalog — Grooving and Cut

Kennametal 2013 Master Catalog — PCBN and PCD Inserts