HDT Steering Wheel identification.

HDT Steering Wheel identification.
VC Momo steering Wheel
No model number, just date stamp.
Called a Sigma.
Has build number of car engraved on it.
This wheel was also available from Momo
without a horn pad.
VH ADP
Same as VC sigma, no markings apart from date
stamp on underside.
Sloper
VH Grp3
380mm in diameter
Model Typ C36
KBA 70024
Known as Cavillino, White stitching
Re released by Momo as Cavillino 2
Sticker still available as repo
VH SS
Model Typ 38?
KBA 70023?
Known as Master, White stitching
VH SS
Model Typ 38?
KBA 70023?
Known as Master,
supposedly for the high output models???
VK Grp3, LE, SS Flyer, Calais, Director
Used in VL’s as well
Model Typ 38?
KBA 70023?
Red stitching
Sloper
VK GrpA Similar Corse
Model Type V35
KBA 70088
The horn button retainer is impossible to get.
Also re released as Monte Carlo with a grained
leather.
See horn pad
VL GrpA Ghibli Model Typ V36
Has horn buttons under dimples.
Some horn pads have smaller triangle.
No stitching
3 different horn pads used, final one has embossed
Peter Brock signature
4 Spoke version of the Ghibli wheel, Ghibli 4
Seen on a few cars. Has horn buttons under dimples.
Possibly VN GrpA
VL Grp 3
Ghibli
Sloper
VL LE, Sports and others
Known as Cobra
White stitching
Magnum Momo Moretti
Magnums Momo Gritti
Also available with silver spokes.
VL Director
"Design by F.A. Porsche"
horn button has PD for
Porsche Design
Linea (on the right)
Sloper
VC horn button and horn pad also used on the VH ADP
Peter Brock signature horn button, commonly found in Flyers and
Magnums.
Black red Black HDT horn button, found in VK GrpA and others.
A Blue black blue also exists.
VK GrpA horn button retainer.
Has fine radius on outer edge and step
underneath.
Will fit all wheels.
Sloper
The VL GrpA wheel did not have stitching around it, seems unique.
Momo regularly revived older models and renamed them.
Grained and smooth leather was used by Momo.
The VC wheel was also available without horn pad (no holes)
Momo hubs came to HDT black and were painted to suit the trim.
Hub number 4805
A Boss hub looks almost the same as the Momo one.
360mm horn pads fit the 380mm wheels.
Horn pads were interchanged and custom pads available.
Horn buttons are now smaller.
The larger button retainer rings are impossible to get.
The VH wheel was fitted to Ferrari’s and are big bucks in the States
The Flyer was fitted to some Jap thing in Europe and gets over 1000 euros when one comes up.