3M™ Dustmaster™ Powered Air Turbo Unit

3M™ Powered & Supplied Air Respirators
3M Dustmaster
Powered Air Turbo Unit
™
™
Care and Maintenance
3M Part Number
The powered air turbo for protection against dusts, welding fumes and nuisance odours.
33
To maintain protection levels, optimise the effective lifetime of the system and avoid the additional cost of replacement, it
is extremely important to carry out regular checks and maintenance on Powered and Supplied Air Respirators.
Before Use
• Ensure Battery is fully charged
• Check airflow – Insert airflow indicator into
Turbo outlet, turn on, if ball fails to rise above
line change the filter and re-check airflow
• Ensure Gasket is replaced every time filter is
changed
• Inspect Breathing Tube – ensure it is free
from splits or holes. Replace if necessary
• Inspect Belt – ensure it is free from splits or
tears and the buckle is undamaged
• Disinfect with 3M™ 105 Wipes
• Charge Battery
• Store in a dry, clean area / locker away
from direct sunlight, high temperatures and
solvents
37
Ordering Consumables, Repair Parts and
Accessories
12
11
To request a quote or place an order
for these items, please contact your 3M
Approved Distributor.
Monthly
Further Information and Advice
• Carry out all the ‘Before Use’ inspections and
create record of this monthly check for the
turbo
If you require additional guidance on the Care
and Maintenance of your 3M Powered and
Supplied Air Equipment, please contact the
Helpline or your local 3M representative.
Additional Checks
• Listen for unusual motor noise. Replace
blower unit if necessary
14
33
3M Health and Safety Helpline
34
After Use
• Clean casing with cloth dampened with a mild
solution of water and liquid household soap
SERVICE
MODULE
Replace all damaged parts immediately to ensure correct levels of protection
Please recycle. Printed in the United Kingdom. © 3M 2009. All rights reserved.
33A
REPAIR KIT
33B
Dustmaster Powered Air Turbo Kit. Contains a
standard Dustmaster Powered Air Turbo Unit,
Pre-filter, Lightweight Breathing Tube and a
Battery Charger
RTUDUSTMASTERUK
Dustmaster turbo unit service module
021-00-65P
33B
Dustmaster turbo unit repair kit
021-00-66P4
34
Blower unit kit
021-15-03P
36
Airflow indicator
021-14-03P
14
Comfort belt
022-25-03P4
Braces (if used with comfort belt)
022-25-10P4
10
0870 60 800 60 (UK)
1 800 320 500 (Ireland)
021-00-38P
33A
37
36
Dustmaster turbo unit (complete with belt,
battery pack, airflow indicator and P2 filter).
Decontamination comfort belt
BLT-12
Belt clip for Dustmaster
BLT-16
Belt
301-00-62P5
Single station battery charger 240V
003-00-38P
10
Battery Pack
BAT-23
11
Pre-filter
12
Dust filter (P2) with gasket
451-00-02P5
12
Dust and odour filter with gasket
451-01-20P5
12
High efficiency P3 dust filter with gasket
451-02-20P5
462-05-00P10x10