ARTHREX VET SYSTEMS

Transcription

ARTHREX VET SYSTEMS

ARTHREX VET SYSTEMS
PRODUCT CATALOG
THE ARTHREX DIFFERENCE
Since 1984, Arthrex has been a privately held corporation
committed to one thing: providing the finest quality products
and educational services to meet the special needs of surgeons
and their patients. Arthrex is dedicated to creative product
development and medical education with an experienced,
devoted team of professionals who are truly committed to
continuing this long-term tradition. New product innovation
in less invasive surgery is the heart and soul of Arthrex, which
has resulted in the development of over 6,000 products for
arthroscopic and minimally invasive orthopaedic surgical
procedures. Our goal is to make technically demanding
surgical procedures easier, safer and reproducible. Your trust
in Arthrex products means you are backed by a company
committed to uncompromising quality and constant product
innovation, while providing you with the most competent
technical customer support in the industry.
TABLE OF CONTENTS
LIGAMENT STABILIZATION
Product Weight Chart
2
FiberWire Suture Family
2-4
FiberWire Accessories
5-6
TightRope
7
®
®
Hip Luxation
8
SwiveLock Anchors
9
Titanium Anchors
10
CCL Kit, Meniscal Knives and Probes
11
®
CAPITAL EQUIPMENT
Fluid Management
12
Adapteur™ Power Systems (APS II)
13
Orthopaedic Electrosurgical System 14
Arthrex CoolCut® Radio Frequency Ablation
15
Drills and Accessories
16-18
Image Management
19-22
Arthroscopy Equipment
23-28
CARTILAGE REPAIR
Canine Unicompartmental Elbow (CUE)
29
SynACART
30
OATS®
31
Chondro Picks/Curettes/Osteotomes
32
Bio-Compression Screws
33
Chondral Darts™
34
™
BIOLOGICS
Arthrex ACP® Double Syringe Systems
35
Viscous-Gel & Viscous-Spray
36
Arthrex IRAP™ II
37
EDUCATION
38
All weight ranges are suggestions
based on the ultimate load of the
product and/or on our veterinary
consultant’s recommendation. It is
up to the veterinarian to determine
the proper product, application,
technique and weight range to
utilize the selected product.
FiberWire Suture Family
Arthrex Vet Systems
Product Weight Chart
FiberWire suture is constructed of a multi-stranded long chain ultra-high molecular weight polyethylene
(UHMWPE) core with a braided jacket of polyester and UHMWPE that gives FiberWire superior strength,
soft feel and abrasion resistance that is unequaled in orthopaedic surgery. Suture breakage during knot tying
is virtually eliminated, especially critical during arthroscopic procedures. FiberWire represents a major
advancement in orthopaedic surgery.
Strength
FiberWire has greater strength than comparable size standard polyester suture. Multiple independent scientific
studies document significant increases in strength to failure, stiffness, knot strength and knot slippage with much
less elongation1.
Biocompatibility
Extensive biocompatibility, animal and clinical testing prove that FiberWire demonstrates biocompatibility
characteristics equivalent to standard polyester suture. Over two years of successful clinical outcomes in over
one million orthopaedic procedures substantiate excellent biocompatibility. Biocompatibility, strength and testing
results are available upon request2.
Tie Ability and Knot Profile
Orthopaedic surgeons enthusiastically endorse FiberWire for its feel and knot tie ability. The first throw stays down,
facilitating reproducible tissue repair. Sliding knots advance smoothly easing arthroscopic knot tying procedures.
Superior strength allows tighter loop security during knot tying, increasing knot integrity while reducing the knot
profile compared to standard polyester suture.
Abrasion Resistance
The multi-strand long chain ultra-high molecular weight polyethylene core dramatically increases FiberWire
abrasion resistance. Surgical procedures that create bone edges, tunnel edges, and articulating surface-abrasion
areas are appropriate indications for FiberWire. FiberWire is over five times more abrasion resistant than standard
polyester suture.
Variety
The FiberWire family includes sizes 4-0 - #5, including designs such as FiberStick and FiberSnare that provide
innovative solutions to arthroscopic suture passing. TigerWire has a black spiral thread for easier arthroscopic
visualization, identification, sizing and motion detection. FiberLoop is ideal for multi-strand tendon repairs.
Safety in Numbers
Trusted by leading orthopaedic surgeons worldwide since its introduction in 2002, FiberWire has contributed
to successful surgical outcomes in over 1,000,000 orthopaedic procedures ranging from Achilles tendon
repair to rotator cuff repair. Multiple scientific publications have confirmed the advantages of FiberWire in
orthopaedic surgery1,2.
1. Lo I KY, Burkhart SS, Biomechanical Principles of Arthroscopic Repair of the Rotator Cuff, Operative Techniques in Orthopaedics, 2002; 12-3:140-155.
2. Deakin M, Stubbs D, Goldberg J, Bruce W, Gillies RM, Walsh WR, Effect of Suture Type, Anchor and Testing Orientation of the Static Properties
of Suture Anchors. A Poster Presentation, #1536. (50th Annual Meeting of the Orthopaedic Research Society)
2
FiberWire
FiberWire is a multi-stranded long chain ultra-high molecular
weight polyethylene (UHMWPE) suture. FiberWire has greater
strength than similar sized polyester suture with superior feel,
smooth tie ability and lower knot profile. FiberWire is the ideal
suture for most orthopaedic soft tissue repairs, virtually eliminating
suture breakage during knot tying.
#5 FiberWire, 38” (blue)
#5 FiberWire, 38” (blue) w/Conventional Cutting Needle, 48 mm 1/2 circle
#5 FiberWire, 38” (blue) w/Conventional Cutting Needle, 48 mm 1/2 circle
and Tapered Needle, 26.5 mm 1/2 circle
#2 FiberWire, 38” (blue) w/Tapered Needle, 26.5 mm 1/2 circle
#2 FiberWire, 38” (1 blue, 1 white/black)
#2 FiberWire, 38” (1 white, 1 blue/black)
#2 FiberWire, 38” (blue) w/Reverse Cutting Needle, 36.6 mm 1/2 circle
#2 FiberWire Loop w/Needle for NeedlePunch, 26” (green), 10 mm, straight
#2 FiberWire, 38” (blue) w/two Tapered Needles, 26.5 mm 1/2 circle
#2 FiberWire, 38” w/Tapered Needle (blue), 36.6 mm 1/2 circle
#2 FiberWire w/two Needles for NeedlePunch, 38 inches (blue)
#2 FiberWire, 38” (1 blue, 1 white/black) w/Tapered Needle,
26.5 mm 1/2 circle #2 FiberWire, 38 inches (blue)
0 FiberWire, 38” (blue) w/Tapered Needle, 22.2 mm 1/2 circle
0 FiberWire, 38” (blue) w/Diamond Point Needle, 22.2 mm 1/2 circle
2-0 FiberWire, 18” (blue) w/Tapered Needle, 17.9 mm 3/8 circle
2-0 FiberWire, 38” (blue) 2-0 Suture Shuttle Loop for NeedlePunch, 40 mm
3-0 FiberWire, 18” (blue) w/Diamond Point Needle, 26.2 mm 3/8 circle
3-0 FiberWire, 18” (blue) w/Tapered Needle, 15 mm 3/8 circle
3-0 FiberWire, 18” (blue) w/Reverse Cutting Needle, 16.3 mm 3/8 circle
4-0 FiberWire, 18” (blue) w/Diamond Point Needle, 18.7 mm 3/8 circle
4-0 FiberWire, 18” (blue) w/Reverse Cutting Needle, 11.9 mm 3/8 circle
4-0 FiberWire, 18” (white) w/Tapered Needle, 12.7 mm 1/2 circle
AR-7210
AR-7211
AR-7213
AR-7200
AR-7201
AR-7240
AR-7202
AR-7204
AR-7205
AR-7206
AR-7207
AR-7208
AR-7233
AR-7250
AR-7251
AR-7220
AR-7221
AR-7224
AR-7242
AR-7225
AR-7227-01
AR-7227-02
AR-7228
AR-7230-01
AR-7230-02
AR-7248
TigerWire®
TigerWire suture uses the same high strength construction as
FiberWire except that it contains a black marker strand in the suture
weave. This strand appears as a stripe in the suture, making suture
identification easier during joint reconstruction and soft tissue repairs.
#2 FiberWire, 38” (blue, white/black)
#2 TigerWire, 38” (white/black)
#2 TigerWire, 38” (white/black) w/two Tapered Needles, 26.5 mm 1/2 circle
#2 FiberWire, 38” (1 white, 1 blue/black)
AR-7201
AR-7203
AR-7205T
AR-7240
FiberStick™ and TigerStick®
The stiff “waxed” end of the FiberStick and TigerStick allows
convenient and easy advancement through most cannulated
instruments or spinal needles, alleviating the need for a
monofilament suture or wire suture shuttle. FiberStick and
TigerStick come with a thin plastic tube which protects the
stiffened suture end until use.
FiberStick, #2 FiberWire, 50” (blue) one end stiffened, 12”
TigerStick, #2 TigerWire, 50” (white/black) one end stiffened, 12”
2-0 FiberStick, 2-0 FiberWire, 50” (blue) one end stiffened, 12”
3
AR-7209
AR-7209T
AR-7222
FiberTape is an ultra-high strength 2 mm wide tape using a similar long chain
polyethylene structure as the FiberWire suture. In addition to high demand
applications like AC joint reconstruction, the broad footprint of the FiberTape is
appropriate for repairs in degenerative cuff tissue where tissue pull-through may
be a concern.
FiberTape, 2 mm, 36” (blue) each end tapered to #2 FiberWire
FiberTape, 2 mm, 7” (blue) each end tapered to #2 FiberWire
TigerTape, 2 mm, 7” (white /black) each end tapered to #2 FiberWire
AR-7237
AR-7237-7
AR-7237-7T
FiberLoop®
FiberLoop is a suture option for multi-strand tendon repairs.
These small diameter looped FiberWire products, in 12- and
20-inch lengths, allow for strong multi-strand flexor and extensor
tendon repairs while reducing tendon damage from multiple
needle passes. FiberLoop is available with 17.9 mm tapered
needles to prevent cutting suture while stitching.
4-0 FiberLoop, 6” (white) w/Tapered Needle, 12.7 mm 1/2 circle
4-0 FiberLoop, 10” (white) w/Tapered Needle, 12.7 mm 1/2 circle
4-0 FiberLoop, 6” (blue) w/Tapered Needle, 17.9 mm 3/8 circle 4-0 FiberLoop, 10” (blue) w/Tapered Needle, 17.9 mm 3/8 circle
2-0 FiberLoop, 30” (blue) w/Diamond Point Needle, 48 mm 1/2 circle
2-0 FiberLoop, 24” (blue) w/Diamond Point Needle, 26.2 mm 3/8 circle
2-0 FiberLoop, 30” (blue) w/Diamond Point Straight Needle, 64.8 mm
0 FiberLoop w/Straight Needle, 13” (blue), 76 mm needle w/7 mm loop
0 TigerLoop w/Straight Needle, 13” (white/black), 76 mm needle w/7 mm loop
#2 FiberLoop w/Straight Needle, 20” (blue), 76 mm needle w/7 mm loop #2 TigerLoop w/Straight Needle, 20” w/TigerWire (white/green),
76 mm needle w/7 mm loop
#2 FiberLoop w/Curved Needle, 20” (blue), 1/2 circle
FiberTape® and TigerTape®
AR-7249-12
AR-7249-20
AR-7229-12
AR-7229-20
AR-7232-01
AR-7232-02
AR-7232-03
AR-7253
AR-7253T
AR-7234
AR-7234T
AR-7234C
FiberSnare®
FiberSnare with closed loop provides an easy, one step approach to creating
a FiberWire loop on the tip of the Bio-Tenodesis Driver. Instead of using a
Nitinol wire, insert the stiff non-looped end retrograde through the tip of the
Bio-Tenodesis Screwdriver. Place the tip of the tendon or tendon graft into the
FiberWire loop and cinch the other end around the suture cleat on the back
end of the blue Tear Drop Handle. The FiberSnare can also be used as a suture
shuttle for passage of traction sutures through bone tunnels.
FiberSnare, #2 FiberWire, 26” (green), stiffened w/closed loop, 12”
AR-7209SN
FiberChain®
FiberChain is a single-stranded #2 FiberWire suture that transitions
to chain links of interwoven FiberWire. It is intended for use with the
SwiveLock™ Suture Anchor.
FiberChain, #2 FiberWire w/ten 7 mm long loops (required w/SwiveLock)
FiberChain, #2 FiberWire w/eight 7 mm long loops (required w/SwiveLock)
AR-7270
AR-7271
FiberLink™
The closed loop on FiberLink is designed to facilitate the application of a
cinch stitch by simply passing the suture through tissue and feeding the free
end through the loop and tensioning. The loop length will ensure the loop
fully encapsulates the tissue prior to tapering down to the single strand.
FiberLink, #2 FiberWire, 26” (blue), w/closed loop
TigerLink, #2 FiberWire, 26” (white/black), w/closed loop
AR-7235
AR-7235T
4
Suture Cutters
The Suture Cutter’s precision jaws prevent knot cutting by leaving a length
of reproducible suture tail, 3 mm for the 4.2 mm outer diameter cutter and
1 mm for the 2.75 mm outer diameter cutters, without direct visual control.
These cutters have a special locking device to prevent premature suture
cutting. The blunt tip of the cutter is excellent for knot pushing.
The Open Ended Suture Cutter was designed to speed up the suture
cutting process. This cutter allows for quick and efficient suture tail
cutting under direct visual control through the same or alternate cannula
or portal. The notch on the side of the cutter tip automatically guides the
suture tails into the front cutting slot for an accurate cut from any angle.
The FiberTape Cutters were designed to cut two strands of FiberTape
flush to the anchor site without direct visual control.
Suture Cutter, 4.2 mm, straight
Suture Cutter, 4.2 mm w/WishBone Handle, straight
2-0 Suture Cutter, 2.75 mm, straight
2-0 Suture Cutter, 2.75 mm, 15° up curve
Suture Cutter, Open Ended, Left Notch
Suture Cutter, open ended, left notch w/WishBone Handle
Suture Cutter, 4.2 mm w/WishBone Handle
FiberTape Cutter
FiberTape Cutter w/WishBone Handle
VAR-12250
VAR-12250W
VAR-11790
VAR-11791
VAR-11794L
VAR-11794LW
VAR-12250W
VAR-13250
VAR-13250W
FiberWire Scissor
The FiberWire Scissor was designed to cut any size or style suture, especially
FiberWire, in open surgical cases where an arthroscopic Suture Cutter is not
necessary. With its specially designed cutting edges, it can cut FiberWire
cleanly and effortlessly without frayed edges. The color-coded handle
facilitates instrument differentiation in large instrument packs.
FiberWire Scissor
FiberWire Scissor, small
AR-11796
AR-11797
FingerShield™
The FingerShield is a woven polyester sleeve with an embedded
radiopaque blue marker designed to reduce pressure-induced
lacerations to the digits of the hand caused by repetitive knot tying
during surgery. They slip right over sterile gloves when needed.
The tips are left open to allow pinch grasp of suture strands, while
still protecting the IP joint area of each digit. The soft, finger conforming
weave will stand up to repetitive hand tying during a case without
constraining the fingers. Suture slides over the FingerShield smoothly
and effortlessly.
FingerShield, 2/pk
AR-7199
FiberWire Tensioner
The FiberWire Tensioner provides controlled tensioning of FiberWire loops
during knot tying when reapproximating soft tissue. The blunt tip keeps the
knot in place, while the tensioning wheel and spring mechanism gently
tension the loop to tighten the repair. It is appropriate for use in conjunction
with #5 FiberWire.
FiberWire Tensioner
Suture Passing Wire
#5 FiberWire, 38 inches (blue)
5
AR-1529
AR-1255-18
AR-7210
Suture Size
Needle Dimensions
Reference No.
Cat. Number
Actual Size of Needles
#5 (7 metric)
48 mm 1/2 circle
CCS-1
AR-7211
#5 (7 metric)
48 mm 1/2 circle
& 26.5 mm 1/2 circle
T-5 & CCS-1
AR-7213
#2 (5 metric)
26.5 mm 1/2 circle
T-5 AR-7200
#2 (5 metric)
26.5 mm 1/2 circle
T-5 AR-7205
#2 (5 metric)
26.5 mm 1/2 circle
T-5 AR-7205T
#2 (5 metric)
26.5 mm 1/2 circle
T-5 AR-7208
#2 (5 metric)
36.6 mm 1/2 circle
C-13 AR-7202
#2 (5 metric)
36.6 mm 1/2 circle
T-8 AR-7206
#2 (5 metric)
10 mm
NeedlePunch
AR-7204
AR-7206
AR-7204
and AR-7207
AR-7211
and AR-7213
AR-7213,
AR-7200,
AR-7205,
AR-7205T,
AR-7208, and
AR-7242
AR-7202
#2 (5 metric)
10 mm
NeedlePunch
AR-7207
0 (3.5 metric)
22.2 mm 1/2 circle
T-4 AR-7250
0 (3.5 metric)
22.2 mm 1/2 circle
D-10 AR-7251
2-0 (3 metric)
17.9 mm 3/8 circle
T-13 AR-7220
2-0 (3 metric)
26.5 mm 1/2 circle
T-5 AR-7242
3-0 (2 metric)
15 mm 3/8 circle
T-43 AR-7227-01
AR-7227-01
3-0 (2 metric)
16.3 mm 3/8 circle
C-22 AR-7227-02
AR-7227-02
3-0 (2 metric)
26.2 mm 3/8 circle
DE-14 AR-7225
4-0 (1.5 metric)
11.9 mm 3/8 circle
C-17 AR-7230-02
4-0 (1.5 metric)
12.3 mm 3/8 circle
T-12 AR-7230-01
AR-7230-02
4-0 (1.5 metric)
18.7 mm 3/8 circle
DE-10 AR-7228
AR-7228
FiberWire Needle Reference Chart
AR-7250
AR-7251
AR-7220
AR-7225
AR-7230-01
FiberLoop Reference Chart
#2 (5 metric)
76 mm w/7 mm loop
-
AR-7234
#2 (5 metric)
76 mm w/7 mm loop
-
AR-7234T
#2 (5 metric)
26.5 mm 1/2 circle
-
AR-7234C
AR-7234,
AR-7234T
AR-7253 and
AR-7253T
0 (3.5 metric) 76 mm w/7 mm loop
-
AR-7253
AR-7234C
0 (3.5 metric) 76 mm w/7 mm loop
-
AR-7253T
2-0 (3 metric)
48 mm 1/2 circle
D-17 AR-7232-01
2-0 (3 metric)
26.2 mm 3/8 circle
DE-14 AR-7232-02
2-0 (3 metric)
64.8 mm
SD-2 AR-7232-03
AR-7232-02
4-0 (1.5 metric)
17.9 mm 3/8 circle
T-13 AR-7229-12
4-0 (1.5 metric)
17.9 mm 3/8 circle
T-13 AR-7229-20
AR-7229-12
and AR-7229-20
4-0 (1.5 metric)
12.7 mm 1/2 circle
T-22 AR-7249-12
4-0 (1.5 metric)
12.7 mm 1/2 circle
T-22 AR-7249-20
4-0 (1.5 metric) 12.7 mm 1/2 circle
T-22 AR-7248
AR-7232-01
AR-7249-12
AR-7249-20
and AR-7248
AR-7232-03
6
TightRope
The TightRope CCL technique was developed to provide a minimally invasive method for extracapsular
stabilization of the cranial cruciate ligament-deficient canine stifle. TightRope CCL seeks to optimize the lateral
suture stabilization technique by employing bone-to-bone fixation, an implant with superior strength and stiffness
designed specifically for ligament repair, and a method for consistent isometric implant placement. As such,
TightRope CCL can counteract cranial tibial thrust, drawer, and internal rotation while providing optimal joint
range of motion.
TightRope Benefits:
• Bone-to-bone fixation
• Strength
• Minimally invasive technique
• Low profile implant
• Potential for addressing all abnormal forces
TightRope CCL Cannulated Drill Bit, 3.5mm (use with VAR-2800) Mini TightRope Cannulated Drill Bit, 2.7mm (use with VAR-2801) Guide Wire, .049 Drill Guide Tensioner with Tensiometer Femoral Aiming Guide FiberWire Scissors Meniscal Probe Banana Knife Hook Knife Push Knife Handle for Knives VAR-2800
AR-8920DC
VAR-2801
AR-8911DC
AR-8920P
AR-4162G
AR-1529
VAR-2810
AR-11796
AR-30000
VAR-5001
VAR-5003
VAR-5005
VAR-5020
TightRope CCL
VAR-2800
Autoclavable
for quick cleaning
Mini TightRope
VAR-2801
Suture Tensioner with Tensiometer
AR-1529
7
The extremely durable standard TightRope and Mini TightRope Systems make stabilizing hip luxations easier
and reproducible with our toggle pins and FiberTape and FiberWire suture materials. The Femoral Aiming
Guide ensures correct placement before drilling.
TightRope CCL
Mini-TightRope CCL
Femoral Aiming Guide
Cannulated Drill Bit, 3.5 mm (use with AR-8920P)
Cannulated Drill Bit, 2.7 mm (use with AR-8920P)
Cannulated Drill Bit, 2.0 mm (use with AR-8933K)
.049 Guidewire (K-wire)
.045 Guidewire (K-wire)
Suture Passing Wire, Nitinol, 8 inches
FiberWire Scissors
FiberWire Scissors, small
Tensioner with Tensiometer
VAR-2800
VAR-2801
VAR-2810
AR-8920DC
AR-8911DC
AR-8933-20C
AR-8920P AR-8933K AR-1255-08
AR-11796
AR-11797
AR-1529
Hip Luxation
Guide to Drill Bit and Implant Size Based on Patient Weight
Dog Weight
Implant Size
®
Drill Bit Size
< 20 lbs.
Mini TightRope
2.7 mm for the acetabulum
and 2.0 mm for the femoral neck*
20 - 50 lbs.
Mini TightRope
2.7 mm
> 50 lbs.
Standard TightRope 3.5 mm
*VAR-2810 Femoral Aiming Guide
8
SwiveLock Anchors
SwiveLock is our newest anchor offered for CCLs and soft tissue-to-bone reattachment. Made with an
inert and nonabsorbable thermoplastic material called PEEK, this new anchoring system allows for knotless
reconstructions without the need for a tensioner. Specially designed vents in the anchor body promote
bone marrow flow and allow for bony ingrowth.
Implants:
PEEK 5.5 mm Knotless SwiveLock Kit (VAR-2323PSLK )includes: PEEK SwiveLock, 5.5 mm x 19.1 mm, closed eyelet, qty. 5
FiberTape, 2 mm, 54 inches, qty. 6
Suture Button, 3.5 mm x 11 mm, qty. 5
AR-2323PSLC
AR-7237
AR-8920
PEEK 4.75 mm Knotless SwiveLock Kit (VAR-2324PSLK) includes:
PEEK SwiveLock, 4.75 mm x 19.1 mm, closed eyelet, qty. 5
AR-2324PSLC
AR-7237
AR-8920
PEEK 3.5 mm Knotless SwiveLock (VAR-2325PSLK) Kit includes:
PEEK SwiveLock, 3.5 mm x 19.1 mm, closed eyelet, qty. 5
AR-2325PSLC
AR-7237
AR-8920
Disposable:
Suture Passing Wire, Nitinol, 8”
AR-1255-08
Instruments:
Tap for 5.5 SwiveLock Anchor Spade Tip Drill for 5.5 SwiveLock Anchor
Cannulated Drill, 2.5 mm Guide Wire, .041, qty. 4 Banana Knife Hook Knife Push Knife Handle for Knives AR-1927CTB
AR-1927D
AR-1530C-25
AR-1530K
VAR-5001
VAR-5003
VAR-5005
VAR-5020
Cannulation
with bony
ingrowth
Vent
Cross section of a Vented BioComposite SwiveLock eight
weeks after implantation in a canine model showing bony
ingrowth in the vents and center cannulation. Data on file
9
The Corkscrew® and FASTak™ Suture Anchors were designed to provide the highest strength possible
in all types of indications and to make technically demanding procedures simpler, safer and reproducible.
Built-in, easy-to-use features, such as laser lines on the driver shaft ensure that the anchor has been placed
at an appropriate depth and the eyelet is lined up in the correct position to pass the suture in the right
direction, are just a couple examples. Combined with the high strength characteristics and increased abrasionresistance of FiberWire, it gives the surgeon confidence during crucial knot tying stages where suture breakage
is virtually eliminated.
AR-1529
VAR-11796
VAR-2100
VAR-2200
VAR-2201
AR-1255-08
AR-8920
AR-8933-20C
AR-8933K
AR-8941K
Anchor Pull-Out Data in 20/40
Anchor Pull-out
Data*
Polyurethane
Foam
Block
700
600
Ultimate Load (N)
Suture Tensioner with Tensiometer
FiberWire Scissor
Corkscrew Suture Anchor w/#5 FiberWire, 5 mm
FASTak Suture Anchor w/#2 FiberWire, 2.8 mm FASTak Suture Anchor, 2.8 mm Suture Passing Wire, Nitinol
Suture Button, 3.5 mm x 11 mm
Cannulated Drill Bit, 2 mm
Guide Wire (K-wire), .045
Guide Wire (K-wire), .062
500
400
Titanium Anchors
300
200
100
0
5 mm Corkscrew w/#5 FiberWire
3.5 mm Securos w/#5 OrthoFiber (3.2 mm drill)
2.8 mm FASTak w/#2 FiberWire
Anchor Pull-Out Data
Ultimate Pull-out Force (lbf)
160 Imex 4 mm x 10 mm w/#2 FiberWire (2.7 mm drill)
140
#5 BoneBiter w/#5 FiberWire (2.5 mm drill)
120
100
80
60
40
20
0
5 mm Corkscrew
5 mm Corkscrew 5 mm
Corkscrew
2.8 mm FASTak
Suture Anchor w/#5 FiberWire
w/#5 FiberWire w/two
#2 FiberWire w/#2 FiberWire
VAR-2100
2.8 mm FASTak
w/#2 FiberWire
VAR-2200
*Data on file at Arthrex
10
CCL Kit, Meniscal Knives and Probes
The CCL Kits come with #2 or #5 FiberWire with swedged on curved and straight needles to allow for
easy passage of the FiberWire through bone tunnels and around the fabella. The strength, less elongation
properties, and abrasion resistance of FiberWire makes this a great suture for CCL reconstructions.
The meniscal knives are great tools for dealing with meniscal tears or soft tissue resection.
These precision-crafted knives are “must have” items. Offered are the Banana Knife, Hook Knife
and Push Knife designs. A reusable handle also provides better gripping in wet environments.
Handle
VAR-5020
#5 CCL Kit
#2 CCL Kit Banana Knife Push Knife Hook Knife Handle VAR-2000
VAR-2002
VAR-5001
VAR-5003
VAR-5005
VAR-5020
Banana Knife
VAR-5001
Hook Knife
VAR-5005
Push Knife
VAR-5003
The meniscal probes provide the surgeon with an excellent tool to assess the meniscus
or soft tissue. A number of different sizes and lengths are offered for your convenience.
Small Hook Probe, w/ black handle Graduated Black Probe, 1.5 mm Tip Graduated Black Probe, 2.5 mm Tip Stainless Steel Probe Graduated Black Probe,
1.5 mm Tip
AR-5021
Small Hook Probe
AR-30000
11
AR-30000
AR-5021
AR-5007
AR-10020
Continuous Wave™ III Arthroscopy Pump
The Continuous Wave III Pump provides ideal joint
distention throughout a surgical procedure. Pressure and
flow levels can be adjusted independently, on the pump
or from the sterile field, with the autoclavable remote for
optimum control of fluid dynamics. Clear joint distention
can be maintained even with aggressive shaving, aspiration
and multiple arthroscopy portals. The Continuous Wave III
Pump incorporates the latest safety and performance features
to meet the highest demands of surgeons, surgical nurses
and administrators in today’s cost-conscious and performanceminded surgical settings.
Console
VAR-6475S
Autoclavable Remote
AR-6476
CAPITAL EQUIPMENT
Fluid Management
Pump Tubing Options
Main Pump Tubing
This tubing set is for those who prefer a complete tubing set and want to replace
the fluid bags after each case. Each tube set comes with an independently packaged
press-fit luer lock to allow for tubing length adjustment – if used in conjunction with the
Extension Tubing. If used alone, the set must be discarded after each use.
Main Pump Tubing for AR-6400 or AR-6475, 16’ long, sterile, qty. 10 AR-6410
Extension Tubing
This unique tubing provides an economical option to reduce tubing costs by allowing
the Main Pump Tubing to remain in use for the entire surgical day. The exclusive backflow
valve prevents contaminated fluid from reaching the Main Pump Tubing. The Main Pump
Tubing and fluid bags no longer need to be discarded after each surgical case.
Extension Tubing, 8’ long, sterile, qty. 20 AR-6220
Y-Tubing Adapter
The optional Y-Tubing Adapter allows four fluid bags to be attached to either the Main Pump
Tubing or the ReDeuce Pump Tubing, resulting in fewer fluid bag changes.
Y-Tubing Adapter, double spike, two per set, sterile, qty. 10 AR-6215
ReDeuce™ Pump Tubing System
Features and Benefits:
• Saves fluid by not requiring the remaining
fluid to be discarded after the termination
of a surgical case.
• Saves tubing costs, as the main tubing stays
in place throughout the surgical day. Only the
ReDeuce Patient Tubing needs to be replaced
for each case.
• Saves set-up time. Only the Patient ReDeuce
Tubing needs to be passed off from the sterile
field before each case. The ReDeuce Pump
Tubing stays in place the entire surgical day
and no additional fluid bags need to be spiked
until they are completely empty.
ReDeuce Pump Tubing
ReDeuce Patient Tubing
ReDeuce Pump Tubing w/connector for AR-6400
or AR-6475, 8’ long, sterile, qty. 10
AR-6411
ReDeuce Pump Tubing, 8’ long, sterile, qty. 20
AR-6421
ReDeuce Tubing is a cost-effective,
two-part tubing system that allows
the pump tubing to stay in place
through the surgical day. Only the
patient tubing is replaced after each
case.
The patient tubing is a two meter
extension set that extends from the
ReDeuce Pump Tubing to the sterile
field. Each ReDeuce Patient Tubing
set contains a backflow restrictor
and touch proof connector to
maintain sterility from case to case.
12
CAPITAL EQUIPMENT
Adapteur Power System II Console and Accessories
APS II Console
This unique, versatile system is designed for multiple orthopaedic procedures. The APS II Console features
two fully functional channels that allow simultaneous handpiece operation. Both channels can be operated
with a single footswitch or individually, when a second footswitch is attached to the console. Additionally,
either channel may be operated manually using the controls on the console face.
VAR-8300
AR-8310
AR-8315
AR-8325F
AR-8325H
13
Footswitch Options: Low Profile Footswitch
The low profile footswitch design minimizes fatigue while maintaining control of all APS II
functions. Directional control and speed increase functions are controlled by pressing the
appropriate pad. By pressing the toggle dome-switch, control is changed between the
console’s dual channels.
Wireless and Corded Multi-Function Footswitches
The wireless and corded (not pictured) multi-function footswitches feature a user-selected
function mode of either the low profile footswitch or the gas pedal footswitch (not pictured).
All speed, direction, cruise and toggle controls are accessible on either of these user-friendly
accessories and the active mode is displayed on the APS II Console.
APS II Small Shaver Handpiece
The APS II Shaver Handpiece delivers the same speed and power as its larger predecessor.
The quick snap-lock collet accepts standard as well as small joint blades and burrs,
making it one of the most versatile handpieces available.
APS II Small Shaver Handpiece, Hand-Control
Based on the design of its predecessor, the hand-control shaver handpiece offers the
same power, performance and versatility but adds increased tactile feel by placing
control at your fingertips. The two ergonomically placed multi-function buttons
control speed and directional modes. The dual-position, snap-lock collet accepts
large and small joint blades and burrs.
The Orthopaedic Procedure Electrosurgical System (OPES®) is the first-of-its kind, completely digital
platform designed to provide the surgeon and O.R. staff with greater flexibility and performance
for arthroscopic as well as open surgical procedures.
Digital Technology and Patient Safety
The OPES generator was designed with patient safety as its highest priority. The completely digital
generator provides efficient tissue cutting, coagulation and ablation at significantly reduced power
settings. The Digital Error Detection (DED) and Neutral Electrode Monitoring (NEM) ensure the highest
level of patient safety.
The Arthrex Advantage
Monopolar Ablation and Coagulation Probes
The OPES monopolar all-in-one disposable ablation probes provide greater ablation speed and efficiency,
while lowering the per procedure cost. For convenience, all probes are hand or foot controlled.
CAPITAL EQUIPMENT
Orthopaedic Electrosurgical System
3-in-1 Electrosurgical System
With “3-in-1” system flexibility, the OPES Electrosurgical Generator is also capable of controlling a host of
different instruments, including disposable monopolar arthroscopic electrodes, reusable and disposable
monopolar open procedure pencils and tips, and reusable bipolar forceps. The need for three separate,
costly and space-occupying electrosurgical generators is eliminated.
Electrosurgical Generator Compatibility
All OPES arthroscopic probes and electrodes can be used in conjunction with standard electrosurgical
generators utilizing a 3-pin monopolar connection port. Another great option to eliminate multiple
arthroscopic ablation boxes in the O.R.
10 Blend Mode Settings
Cut Mode
Coag Mode
Bipolar Mode
Pinpoint or Spray Coag
Selector
Monopolar & Bipolar
Footswitch Indicator
10 Factory Power Level Presets
Bipolar Instrument
Connection Port
Cut I, Cut II &
Blend Mode Selector
Patient Return Electrode Port
3-Pin Monopolar Instrument
Connection Port
VAR-9600
14
CAPITAL EQUIPMENT
Arthrex CoolCut Radio Frequency Ablation
The new line of CoolCut radio frequency devices features an innovative ergonomic handle with
finger touch controls. The 90° versions have a unique shape that allows for maximum extension
from the tip of the electrode to the shaft of the device, while still fitting through a 5 mm cannula.
The new CoolCut shaft coating facilitates easy insertion through both working cannulas and
subcutaneous tissue.
The pioneering design of the CoolCut electrode tips makes it possible to operate the CoolCut
series at extremely low-power settings, thereby increasing patient safety without sacrificing
performance. The reduction of the power requirements also allows for the absence of a ceramic
ring surrounding the electrode face, reducing the size of the tip which aids in reaching target
tissue in anatomically tight spaces.
CoolCut Ablation Wands
Aspirating Ablation Probes
Meniscal Probes
CoolCut 90˚
AR-9803A-90
CoolCut
Meniscectomy 45˚
AR-9802M-45
CoolCut 50˚
AR-9803A-50
Hook Tip Probes
CoolCut
Meniscectomy 90˚
AR-9802M-90
CoolCut Hook
AR-9801 Ball Probes
CoolCut 30˚
AR-9803A-30
CoolCut XL
AR-9705A-90
Non-Aspirating Ablation Probes
CoolCut Tip
AR-9808
CoolCut Tip 45˚
AR-9808-45
Accessory Devices
Arthrex Pencil Kit Split Ground Pad CoolCut 90NA
AR-9803-90
CoolCut 30NA
AR-9803-30
15
CoolCut 50NA
AR-9803-50
AR-9810
AR-9610SGP
Small Joint CoolCut Ablation Wands
CoolCut SJ Ball
AR-9808SJ
CoolCut SJ Ball 45
AR-9808SJ-45
CoolCut SJ 45˚
AR-9809SJ-45
CoolCut SJ 90˚
AR-9809SJ-90
CoolCut XLNA
AR-9705-90
Arthrex 600 Power System
• Cost-efficient – one handpiece for all attachments
• Proprietary brushless motor technology – more reliable
• PEEK housing – lightweight and cools faster
• Easier, effective cleaning with washer/decontaminator
• Variable speed trigger with consistent torque from zero – max speed
• Lifetime lubricated – maintenance free
• Speed – auto detected by the attachment
• Handpiece – 2.2 lbs.
• 4.1 mm cannulation
CAPITAL EQUIPMENT
Drills and Accessories
Arthrex 300 Power System - Small Bone
• Cost-efficient – one handpiece for all attachments
• Proprietary brushless motor technology – more reliable
• PEEK housing – lightweight and cools faster
• Easier, effective cleaning with washer/decontaminator
• Variable speed trigger with consistent torque from zero – max speed
• Lifetime lubricated – maintenance free
• Speed – auto detected by the attachment
• Handpiece – 1.2 lbs.
• 2.4 mm cannulation
up to 6-inch pin
Li-Ion battery
• No memory effect – power life
doesn’t get shorter over time
• Highest power-to-weight ratio
• Provides max power through full charge
• Leave batteries on charger
until next use – trickle charge
• Quick charge from zero –
less than one hour
• One year warranty
• Lightweight – .19 lbs.
16
CAPITAL EQUIPMENT
V-600SS-2
Sagittal Saw Mini
Speed: 0-13,000 cpm
V-600SS
Sagittal Saw Large
Speed: 0-13,000 cpm
V-600SR Reciprocating Saw
Speed: 0-13,000 cpm
V-600
Handpiece
V-600PD-2
Pin Driver
1.6-4.1 mm
V-600DAT
Drilling Small AO/Trinkle
V-600WD-2
Wire Driver
0.6-1.6 mm
V-600DAO
Drilling Small AO
V-600BH
Battery Housing
V-600RJC Reaming Keyless Chuck
0.6-7.4 mm
V-600DJC Drilling Keyless Chuck
0.6-7.4 mm
V-600TK
Transfer Plate
V-600RKC V-600RAP
Reaming Keyed Chuck
0.6-6.5 mm (1/4”)
Reaming Large AO/Protek
V-600RZH Reaming Zimmer/Hudson
V-600DKC Drilling Keyed Chuck
0.6-6.5 mm (1/4”)
V-600DAP Drilling Large AO/Protek
V-600DZH Drilling Zimmer/Hudson
V-600L
Li-Ion Battery
V-300/600
Charging Station for
V-300L and V-600L
V-600T
17
AR-600C
Instrument Case
Instrument Tray
V-600Key
Spare Key
(included with Keyed Chucks)
V-300L
Li-Ion Battery
V-300TK
Transfer Plate
V-300BH
Battery Housing
V-300
Handpiece
CAPITAL EQUIPMENT
V-300R
Burring Tool, 2.35 mm
V-300SS
Sagittal Saw
V-300SR
Reciprocating Saw
V-300WD
Wire Driver 0-1.6 mm
V-300DKC
V-300DA
Drilling Keyed Chuck
0-4 mm (5/32”)
Drilling Small AO
V-300RKC
Reaming Keyed Chuck
0-4 mm (5/32”)
V-300RAO
Reaming Small AO
V-300PD
Pin Driver 1-2.4 mm
V-300DL Drilling Large Keyless Chuck
0-4.5 mm (3/16”)
V-300D Drilling Keyless Chuck
0-3 mm (1/8”)
V-300Key
Spare Key
(*included with Keyed Chucks)
V-300T
Instrument Tray
V-300H
Handling Tool
(included with V-300)
V-300/600 Charging Station
for V-300L and V-600L
AR-300C
Instrument Case
18
CAPITAL EQUIPMENT
SynergyHD3 Imaging Platform
SynergyHD3 integrates three consoles into one and revolutionizes endoscopic visualization and image
management. The SynergyHD3 combines the latest technology, true 1080p HD cameras, LED lighting,
and image management with an intuitive tablet controller. One console and one unique tablet interface
simplifies use, and programmable individual surgeon preferences enhance the user experience.
Synergy Consoles
SynergyHD3 Console, 110v, w/tablet SynergyHD3 Console with Turret, 110v, w/tablet SynergyHD3 Console, 220v SynergyHD3 Tablet VAR-3200-0001
VAR-3200-0001T
VAR-3200-0002
VAR-3200-1004
SynergyHD3 Tablet Controller
Our unique and innovative remote “tablet” interface allows the users to remotely and efficiently enter patient
information, surgeon preferences and image management settings one time. The tablet can be draped in an
x-ray cassette cover for use in the sterile field. SynergyHD3 will help reduce cost, OR times and increase efficiency.
Camera Head
SynergyHD3 Camera Heads provide true 1080p HD resolution in a comfortable, ergonomic design.
The autoclavable, programmable head is designed and optimized with the integrated LED light source
and image management system to produce the best and most consistent
image available. High resolution, high dynamic range and depth
of field are not just words…they are now the standard.
Camera Head
SynergyHD3 Camera Head, 1080p, autoclavable VAR-3210-0001
HD Monitors
•High Definition (HD) Medical Display
•Widescreen, full HD 1920x1080 resolution
•Picture-in-picture and side-by-side display modes
•Versatile multi-format signal support
High definition Monitors
HD Monitor, LED, 26” HD Monitor, LCD, 32” HD Monitor, OLED, 25” VAR-3250-2601
VAR-3250-3201
VAR-3250-2602
Sheathless Arthroscope
25” HD OLED
30˚ HD Sheathless Arthroscope
VAR-3350-5030
The Sheathless Arthroscope will revolutionize the way arthroscopic
procedures are performed. By eliminating bulky scope sheaths, obturators,
Switching Sticks, and maintaining fluid inflow through operative cannulas – viewing
portal changes are quick and efficient. Fluid extravasation, due to repeated portal changes,
is minimized by maintaining operative cannulas in all portals. The Sheathless Arthroscope is designed and
constructed with additional structural support along its length to stand up to normal stresses without a sheath.
The Sheathless Arthroscope will reduce surgical times by expediting portal changes and eliminating distention loss.
4 mm Sheathless Arthroscopes
HD Sheathless Arthroscope, 30˚, 4 mm x 134 mm HD Sheathless Arthroscope, 70˚, 4 mm x 138 mm VAR-3350-5030
VAR-3350-5070
Light Guides
Fused Light Guide, Wolf, 3.5 mm x 2.7 m (9’)
Fused Light Guide, Wolf, 5 mm x 2.7 m (9’)
Fused Light Guide, Wolf, 5 mm x 4 m (13.4’)
19
VAR-3240-3527
VAR-3240-5027
VAR-3240-5040
Light Guide
VAR-3240-5027
Arthrex offers a full complement of high quality scopes and sheaths for visualization of multiple joint types
and for surgeon preference. Scope sizes range from 1.9 mm – 4 mm with short, standard, or long lengths
to get into hard to access joints.
4 mm Arthroscopes
HD Arthroscope, 30˚, 4 mm x 152.5 mm HD Arthroscope, 70˚, 4 mm x 155.5 mm HD Arthroscope, 30˚, reverse cant, 4 mm x 152.5 mm VAR-3350-4030
VAR-3350-4070
VAR-3350-4030R
Sheaths and Obturators for 4 mm Arthroscopes
Sheath System*, single stopcock for 4 mm scope VAR-3370-4001
Sheath System*, double stopcock for 4 mm scope VAR-3370-4002
Hi-flow Sheath System*, fenestrated, single stopcock for 4 mm scope VAR-3371-4001
Hi-flow Sheath System*, fenestrated, double stopcock for 4 mm scope VAR-3371-4002
Sharp Trocar for 4 mm scope sheath system VAR-3375-4002
Blunt Obturator for 4 mm scope sheath system VAR-3375-4004
4 mm 30˚ Arthroscope
VAR-3350-4030
CAPITAL EQUIPMENT
Arthroscopes and Sheath Systems
3 mm Arthroscopes
HD Arthroscope, 30˚, 3 mm x 138 mm
HD Arthroscope, 70˚, 3 mm x 140 mm
VAR-3350-3030
VAR-3350-3070
Sheaths and Obturators for 3 mm Arthroscopes
Sheath System*, single stopcock for 3 mm scope VAR-3370-3001
Sheath System*, double stopcock for 3 mm scope VAR-3370-3002
Sharp Trocar for 3 mm scope sheath system VAR-3375-3002
Hi-flow Sheath System*, single stopcock for 3 mm scope VAR-3370-0301
Hi-flow Sheath System*, double stopcock for 3 mm scope VAR-3370-0302
Hi-flow Sheath System*, fenestrated, single stopcock for 3 mm scope VAR-3371-0301
Hi-flow Sheath System*, fenestrated, double stopcock for 3 mm scope VAR-3371-0302
Sharp Trocar for hi-flow 3 mm scope sheath system VAR-3375-0302
Conical Obturator
VAR-3375-4001
Fenestrated Sheath
VAR-3370-4002
2.7 mm Short Arthroscopes
Arthroscope, 30˚, 2.7 mm x 72 mm
Arthroscope, 70˚, 2.7 mm x 75 mm
VAR-3350-2730
VAR-3350-2770
2.4 mm Short Arthroscopes
Arthroscope, 30˚, 2.4 mm x 72 mm Arthroscope, 70˚, 2.4 mm x 75 mm VAR-3350-2430
VAR-3350-2470
Sheaths and Obturators for 2.4 mm and 2.7 mm Arthroscopes
Sheath System*, single stopcock for 2.4 mm scope Sheath System*, double stopcock for 2.4 mm scope Sharp Trocar for 2.4 mm scope sheath system Sheath System*, single stopcock for 2.7 mm scope Sheath System*, double stopcock for 2.7 mm scope Sharp Trocar for 2.7 mm scope sheath system VAR-3370-2401
VAR-3370-2402
VAR-3375-2402
VAR-3370-2701
VAR-3370-2702
VAR-3375-2702
1.9 mm Arthroscope
30˚ Arthroscope, 1.9 mm x 58 mm VAR-3350-1930
Sheaths and Obturators for 1.9 mm Arthroscope
Sheath System*, single stopcock for 1.9 mm scope Sheath System*, double stopcock for 1.9 mm scope Sharp Trocar for 1.9 mm scope sheath system
*Sheath Systems include Conical Obturator
VAR-3370-1901
VAR-3370-1902
VAR-3375-1902
20
CAPITAL EQUIPMENT
30° Hip Scope
AR-3200-30
70° Hip Scope
AR-3200-70
Cannulated Obturator
AR-3211
Hip Sheath
AR-3210-02
Arthroscopes and Sheath Systems
continued
Sheaths for Competitive Scopes
Sheath, continuous flow, double stopcock, rotatable for Storz Blunt Obturator for AR-3300 Sheath Sheath, double stopcock, tapered, fenestrated for Stryker Blunt Obturator for AR-3310-02 Sheath Trocar for AR-3310-02 Sheath Sheath, double stopcock, tapered, fenestrated for Dyonics Blunt Obturator for AR-3315-02 Sheath AR-3300
AR-3301
AR-3310-02
AR-3311
AR-3312
AR-3315-02
AR-3316
Hip Arthroscope
30˚ Hip Arthroscope, 4 mm x 225 mm 70˚ Hip Arthroscope, 4 mm x 225 mm
VAR-3200-30
VAR-3200-70
Hip Sheaths
Sheath, hip, double stopcock, tapered, fenestrated, rotatable for Storz AR-3210-02
Obturator, hip, cannulated w/handle for AR-3210 AR-3211
Accessory Replacement Components
SynergyHD3 Accessory
SynergyHD3 Turret Conversion Kit AR-3201-1002
Stopcock Replacements
Stopcock, single, spare for SynergyHD3 sheath Stopcock, double, spare for SynergyHD3 sheath AR-3370-0001
AR-3370-0002
4 mm Scope Accessory Replacement Parts
Hi-flow Sheath Body, fenestrated, 4 mm scope sheath system Sheath Body, 4 mm scope sheath system Conical Obturator, 4 mm scope sheath system AR-3371-4000
AR-3370-4000
AR-3375-4001
3 mm Scope Accessory Replacement Parts
Sheath Body, 3 mm scope sheath system Conical Obturator, 3 mm scope sheath system Sheath Body, fenestrated, hi-flow 3 mm scope sheath system Sheath Body, hi-flow 3 mm scope sheath system Conical Obturator, hi-flow 3 mm scope sheath system 21
AR-3370-3000
AR-3375-3001
AR-3371-0300
AR-3370-0300
AR-3375-0301
Small Joint Scope Accessory Replacement Parts
Sheath Body, 2.7 mm scope sheath system Conical Obturator, 2.7 mm scope sheath system Sheath Body, 2.4 mm scope sheath system Conical Obturator, 2.4 mm scope sheath system Sheath Body, 1.9 mm scope sheath system Conical Obturator, 1.9 mm scope sheath system AR-3370-2700
AR-3375-2701
AR-3370-2400
AR-3375-2401
AR-3370-1900
AR-3375-1901
Laparoscopes
Laparoscope, 0˚, 5.5 mm x 365 mm
Laparoscope, extended length, 0˚, 5.5 mm x 480 mm
Laparoscope, 0˚, 10 mm x 405 mm
Laparoscope, 30˚, 10 mm x 405 mm
Laparoscope, 45˚, 10 mmx 405 mm
Laparoscope, extended length, 0˚, 10 mm x 526 mm
VAR-3351-5500
VAR-3351-5530
VAR-3351-5545
VAR-3351-5500L
VAR-3351-5530L
VAR-3351-5545L
VAR-3351-1000
VAR-3351-1030
VAR-3351-1045
VAR-3351-1000L
VAR-3351-1030L
VAR-3351-1045L
Features:
• Multiple configurations
• Adjustable shelves
• Prewired power cord system
• Printer access from rear of cart on top shelf
• Printer and shaver on top shelf
• 38” extended boom arm
• 8” static mount arm
• 200° rotatable touch panel arm
• Transformer included
• Dimensions 60” x 30” x 30”
Video Cart, static monitor mount Video Cart, extended boom arm Adjustable Shelf Assembly Drawer Assembly Keyboard Tray Co2 Cylinder Tank Holders, side mount Footswitch Holder, side mount Extended Boom Arm Touch Panel Arm, top mount Caster, nonlocking Caster, locking CAPITAL EQUIPMENT
Video Cart Options
Multi-directional
Boom Monitor Mount
AR-6000
AR-6000b
AR-6000-1
AR-6000-2
AR-6000-3
AR-6000-4
AR-6000-5
AR-6000-6
AR-6000-7
AR-6000-8
AR-6000-9
Printer
(accessible
at the back)
Tablet Controller
(rotates to the left
and right of the
main monitor)
Fully Adjustable
Shelves
Large Capacity
Drawer
Footswitch
Holder
Printer
Sony UPDR80MD
Instrument Tray
Video Instrument Tray AR-3130C
22
CAPITAL EQUIPMENT
Canine Arthroscopy Set
The set contains three removable trays:
• The Main Instrument Tray includes a Cup Curette, Banana Knife, a large obturator for dilating
portals and three probes.
• The Canine Cannula Tray contains a unique cannula system that allows precise one-step placement
of the first cannula by using a cannulated obturator that inserts directly over the initial guide needle.
Beveled changing rods allow easy portal dilation and switching to two larger cannula sizes. This tray
also includes a fenestrated outflow cannula with stopcock and Switching Sticks designed for the stifle.
• A specialized Hand Instrument Tray secures a Series I Grasper and a Slender Punch in an upright position
for easy accessibility. The tray also has space for additional hand instruments. Arthrex offers a lifetime
guarantee on materials and workmanship on every Series I instrument. The compact, lightweight,
expandable and anodized Canine Arthroscopy Set contains the most popular instruments as determined
by leading canine arthroscopic surgeons. The aluminum autoclave case holds the instruments securely
in slotted, laser labeled silicone pads for proper protection and easy identification during use and repacking.
Main Instrument Tray Canine Arthroscopy Set (VAR-30000S):
Small Cup Curette, 2.5 mm diameter Banana Knife, 2.5 mm diameter Graduated Black Probe, 1.5 mm Tip Graduated Black Probe, 2.5 mm Tip Probe, Stainless Steel Obturator, Blunt Hand Instrument Tray:
Grasper, Alligator Hook Tip Punch, Slender Straight Tip Canine Cannula Set (VAR-3002S):
Cannulas (2.9, 3.7 & 4.3 mm) Cannulated Obturator Switching Stick, 2.9 mm Switching Stick, 3.7 mm Dilation Needles, qty. 5 Stifle Outflow Cannula Stifle Outflow Obturator VAR-3008
VAR-3009
AR-5021
AR-5007
AR-10020
AR-3033
VAR-11600SR
VAR-11100
Hand Instrument Tray
Canine Cannula Set
VAR-3002
VAR-3003
VAR-3004-2.9
VAR-3004-3.7
VAR-3005
VAR-3006
VAR-3007
Main Instrument Tray
Hand Instrument Tray
Canine Cannula Tray
23
The arthroscopic hand instruments are precision manufactured to the highest quality standards in the U.S.
at Arthrex California, Inc. These instruments have state-of-the-art quality, durability, precise tactile feel and an
extremely low profile tip. These features facilitate easier access to pathology in tight joint spaces with precision
cutting edges and precise resection control. EDM manufacturing technology with stainless steel edges guarantees
maximum sharpness and durability that rarely require resharpening or repair. Less than 1% of all Arthrex Arthroscopy
Instruments require resharpening after two years of surgical usage, an unprecedented achievement for a fine
surgical instrument in orthopaedics.
Punch, Standard Straight Tip,
2.75 mm, Straight Shaft
VAR-110000
CAPITAL EQUIPMENT
Arthroscopy Instruments
Self-Ratcheting Grasper, Blunt
Straight Tip, 2.75 mm, Straight Shaft
VAR-11500SR
Self-Ratcheting Grasper Alligator,
Hook Tip, 2.75 mm, 15° Up Curved
Straight Shaft
VAR-11600SR
Self-Ratcheting Grasper, Pointed
Straight Tip, 2.75 mm, 15° Up Curved
Straight Shaft
VAR-11700SR
24
CAPITAL EQUIPMENT
Graspers
Graspers are available in 2.75 mm, 3.4 mm and 4.2 mm shafts. Series I NR Graspers are made
with non-ratcheting handles and are nonlocking. Series I SR Graspers feature a self-releasing locking
mechanism. All WishBone™ Graspers feature a ratcheting lock mechanism that can be disengaged
for nonlocking operation.
Blunt Grasper Tips
Series 1 WishBone
(2.75 mm shaft diameter)
VAR-11500 NR (SR) VAR-11500W Straight Shaft
VAR-11510 NR (SR) VAR-11510 W 15˚ up Curved Shaft
VAR-12510 NR (SR) VAR-12510W 15˚ up Curved Shaft
Alligator Grasper/Hook Tips
Series 1 WishBone
VAR-11600 NR (SR) VAR-11600W
VAR-11610 NR (SR) VAR-11610W
VAR-12600 NR (SR) VAR-12600W
VAR-12610 NR (SR) VAR-12610W
VAR-13600 NR (SR) VAR-13600 W
Straight Shaft
15˚ up Curved Shaft
Straight Shaft
Straight Shaft
ACL/PCL Graft Passing Forceps
Series 1 WishBone
VAR-13400 VAR-13400W Straight Shaft
Pointed Grasper Tips
Series 1 WishBone
VAR-11700 NR (SR)
VAR-11700W
VAR-11710 NR (SR)
VAR-11710W
VAR-12700 NR (SR)
VAR-12700W
VAR-12710 NR (SR)
VAR-12710W
Straight Shaft
Straight Shaft
Mini-Graspers
Series 1 WishBone
VAR-11900 NR (SR)
VAR-11900W Straight Tip
VAR-11910 NR (SR)
VAR-11910W 15° Up Curved Shaft, Straight Tip
KingFisher Suture Retriever
Tissue Grasper
Series 1 WishBone
25
Straight Punches
Straight Tip Punches are available in three bite sizes with
a 2.75 mm shaft and four bite sizes with a 3.4 mm shaft. Slender Punch Tips
Series 1 WishBone
VAR-11110 VAR-11110W 15˚ up Curved Shaft
VAR-11120 VAR-11120W 30˚ R Curved Shaft
VAR-11130 VAR-11130W 30˚ L Curved Shaft
VAR-12110 VAR-12110W 15˚ up Curved Shaft
VAR-12120 VAR-12120W 30˚ R Curved Shaft
VAR-12130 VAR-12130W 30˚ L Curved Shaft
Bite Size
2.75 mm Shaft
• slender - 0.7 mm
• standard - 1.4 mm
• large - 2.5 mm
3.4 mm Shaft
•
•
•
•
slender - 0.9 mm
standard - 1.7 mm
medium - 2.6 mm
large - 3.4 mm
CAPITAL EQUIPMENT
Punches
Medium Punch Tips
Series 1 WishBone
VAR-12300 VAR-12300W
VAR-12310 VAR-12310W
VAR-12320 VAR-12320W
VAR-12330 VAR-12330W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Large Punch Tips
Series 1 WishBone
Standard Punch, 15˚ Up Tips
Series 1 WishBone
VAR-11050 VAR-11050W
VAR-11060 VAR-11060W
VAR-11070 VAR-11070W
VAR-11080 VAR-11080W
VAR-12050 VAR-12050W
VAR-12060 VAR-12060W
VAR-12070 VAR-12070W
VAR-12080 VAR-12080W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
VAR-11200 VAR-11200W
VAR-11210 VAR-11210W
VAR-11220 VAR-11220W
VAR-11230 VAR-11230W
VAR-12200 VAR-12200W
VAR-12210 VAR-12210W
VAR-12220 VAR-12220W
VAR-12230 VAR-12230W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Medium Punch, 15˚ Up Tips
Series 1 WishBone
Standard Punch Tips
Series 1 WishBone
VAR-11000 VAR-11000W
VAR-11010 VAR-11010W
VAR-11020 VAR-11020W
VAR-11030 VAR-11030W
VAR-12000 VAR-12000W
VAR-12010 VAR-12010W
VAR-12020 VAR-12020W
VAR-12030 VAR-12030W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
VAR-12350 VAR-12350W
VAR-12360 VAR-12360W
VAR-12370 VAR-12370W
VAR-12380 VAR-12380W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
Large Punch, 15˚ Up Tips
Series 1 WishBone
VAR-11250 VAR-11250W
VAR-11260 VAR-11260W
VAR-11270 VAR-11270W
VAR-11280 VAR-11280W
Straight Shaft
30˚ R Curved Shaft
30˚ L Curved Shaft
26
CAPITAL EQUIPMENT
Suture Cutters and Scissors
No arthroscopy instrument line would be complete without top-of-the-line quality instruments like
Suture Cutters and arthroscopic Scissors.
Suture Cutter, open-ended,
left notch (used for any size suture)
VAR-11794L
(for 2-0 suture only, meniscus repair)
Suture Cutter, straight VAR-11790
Suture Cutter, 15˚ up curve VAR-11791
Suture Cutter, straight
(for #2 suture only)
VAR-12250
CrabClaw Knot Pusher/Suture Retriever
VAR-12960
Curved Scissor, right
Curved Scissor, left (3.4 mm shaft diameter)
Scissor, straight, serrated
VAR-12140
Cannulas
PassPort Button Cannula
The PassPort Cannulas help maximize visibility and maneuverability inside and
outside of the arthroscopic work space. The double-dam, one-piece molded design
has low profile flanges that seat flush to the skin and soft tissue. These flanges create
a stable portal that allows instruments to be inserted and removed, without the concern
of cannula loss. They are easily introduced by grasping the inside flange with a curved hemostat
and inserting into the incision. Each PassPort is supplied with a 5 mm spacer to ensure the accurate
length. They may be used for indications in the shoulder, knee, hip and elbow.
Gemini SR8 Cannula
The Gemini SR8 Cannula incorporates a clever, deployable wing feature
to prevent cannula “fall-out” during insertion and removal of instruments
for Bankart, SLAP and rotator cuff repairs. The low profile design of the
wings will securely hold the cannula in place, even in the tightest working
spaces, without taking up space and hampering the surgeon’s ability to
efficiently complete their work. Additionally, the inner sleeve of the cannula can telescope relative to
the outer portion of the cannula allowing the surgeon a clear, unobstructed channel to pathology.
It is also very useful during knot tying, allowing the surgeon to place the clear telescoping tube down
to the knot to prevent soft tissue entrapment within the suture knot. The included, disposable cannulated
obturator allows for easy insertion over a 2.6 mm Switching Stick.
27
VAR-12150
VAR-12160
Twist-In Cannulas
The translucent Twist-In Cannula allows direct arthroscopic visualization of instruments and
suture passing through the cannula. The flexible option easily conforms to large or curved
instruments. Each cannula is supplied with a “no-squirt” cap and disposable obturator.
Crystal Cannula®
The Crystal Cannula offers a unique barrel-shaped retention bowl that pools fluid to
eliminate cannula “squirt”. Three atraumatic distal retaining options help to prevent
cannula “fall-out”. The translucent cannula allows for direct visualization of instruments
and suture passing. The flexible option easily conforms to large or curved instruments.
Each cannula is supplied with a disposable obturator.
Twist-In
Cannula
AR-6530
Partially
Threaded
Cannula
AR-6566
Low Profile 5 mm Cannula
This 5 mm cannula is the lowest profile cannula on the market that allows for direct
visualization of instruments and suture passing. The proximal portion of the cannula is
similar to the Crystal Cannula. Each cannula is supplied with a disposable obturator.
Shoehorn Cannula
The Shoehorn Cannula has a longitudinal slot on top of the cannula to allow oversized
instruments to be introduced. Each cannula is supplied with a disposable obturator.
CAPITAL EQUIPMENT
Arthroscopic Cannulas
Instrument
Cannula
AR-6550
Crystal
Cannula
AR-6560
Bridge and Cannula Sets
•
•
•
•
•
Maintain portals while moving the arthroscope
Connect inflow or outflow tubing
Fenestrated and nonfenestrated options
J-lock type connector
Threaded portion can lock into certain shaver blades
Low Profile
Cannula
AR-6548
Bridges
Shoulder Bridge, two Stopcocks Shoulder Bridge, one Stopcock Shoehorn
Cannula
AR-6565
IR5001
IR5002
Cannula Sets (available in fenestrated and nonfenestrated)
Cannula Set, 3.0 mm, fenestrated AR-3400-3.0S
Cannula Set, 3.0 mm, nonfenestrated AR-3410-3.0S
Sets include:
3.0 mm Metal Cannula, 2 ea. AR-3400-3.0
Blunt Obturator for 3.0 mm Metal Cannula AR-3401-3.0
Trocar Obturator for 3.0 mm Metal Cannula AR-3402-3.0
Inflow Cannula Adapter AR-3035
Sets include:
Sets include:
Sets include:
Sets include:
Sets include:
Inflow Cannula Adapter
AR-3035
Inflow Cannula Adapter
with Stopcock
AR-3035L
Reusable
Obturator
AR-6549
Inflow Cannula
Adapter
AR-3035
Bridge Cannula Set
AR-3400
Shoulder Bridge
with two Stopcocks
IR5001
Fenestrated
AR-3410
Nonfenestrated
28
CARTILAGE REPAIR
Canine Unicompartmental Elbow (CUE)
The Canine Unicompartmental Elbow is a safe and effective option for the treatment for Medial Compartment
Disease (MCD) for dogs in which arthroscopic treatment and nonsurgical options are no longer successful.
By focusing on the specific area of disease (the medial compartment), the CUE implant provides a less invasive,
bone-sparing option for resurfacing the bone-on-bone medial compartment while preserving the dog’s own
“good” cartilage in the lateral compartment. This medial resurfacing procedure was created to reduce or
eliminate the pain and lameness that is caused by the bone-on-bone grinding.
CUE Humeral
Implant
Meshed titanium base
promotes bone ingrowth
Arthroscopic image of
severe MCD
Post-op cranial-caudal
radiograph showing CUE
implants in place
29
Arthroscopic image of
CUE 7 months post-op
CUE Ulnar
Implant
CUE Instrument Set (VAR-7020S) includes:
CUE Humerus Template, medi
CUE Humerus Template, large
CUE Humerus Trial, medium
CUE Humerus Trial, large
CUE Humerus Implant Holder, medium
CUE Humerus Implant Holder, large
CUE Humerus Tamp
CUE Humerus Drill, medium
CUE Humerus Drill, large
CUE Humerus Drill Stop, medium
CUE Humerus Drill Stop, large
CUE Ulna Trial, medium
CUE Ulna Trial, large
CUE Ulna Implant Holder, medium
CUE Ulna Implant Holder, large
CUE Ulna Drill, medium
CUE Ulna Drill, large
CUE Ulna Guide, medium
CUE Ulna Guide, large
CUE Ulna Tamp
CUE Instrument Set Case
VAR-7001-M
VAR-7001-L
VAR-7002-M
VAR-7002-L
VAR-7003-M
VAR-7003-L
VAR-7004
VAR-7011-M
VAR-7011-L
VAR-7012-M
VAR-7012-L
VAR-7006-M
VAR-7006-L
VAR-7007-M
VAR-7007-L
VAR-7014-M
VAR-7014-L
VAR-7015-M
VAR-7015-L
VAR-7016
VAR-7020C
Accessories:
Cannulated Driver Handle with AO Connector
T15 Hexalobe Driver
Drill Bit, 2.5 mm
Bone Tap, 3.5 mm
AR-13221AOC
AR-8941DH
AR-4160-25
AR-8935T
Implants:
CUE Humerus Implant, medium
CUE Humerus Implant, large
CUE Ulna Implant, medium
CUE Ulna Implant, large
Corkscrew FT II, 5.5 mm x 16 mm, w/three #2 FiberWire
Low Profile Screw, 3.5 mm x 24 mm, titanium
VAR-7000-M
VAR-7000-L
VAR-7005-M
VAR-7005-L
AR-1928SF-3
AR-8935-24
AR-8935-26
AR-8935-28
AR-8935-30
AR-8935-32
AR-8935-34
AR-8935-36
AR-8935-38
AR-8935-40
Disposables:
Drill Tip Guide Pin, 2.4 mm (required)
Curved Cruciate Needle
AR-1250L
VAR-5000
CUE Instrument Set (VAR-7020S)
SynACART is a synthetic osteochondral cartilage plug for treating osteochondral defects in the elbow, shoulder,
fetlock, hock, carpal joint and stifle. It is made from a biodurable polycarbonate urethane to overcome surface
degradation and fusion molded onto a titanium meshed base to allow for bony ingrowth. This product allows
for a quick repair of defects without worry about sufficient donor cartilage or donor site morbidity.
SynACART, 8 mm x 8 mm SynACART, 10 mm x 8 mm SynACART, 20 mm x 8 mm SynACART, 25 mm x 8 mm SynACART Instrument Case SynACART Cannulated Drill, 8 mm SynACART Cannulated Drill, 10 mm SynACART Cannulated Drill, 20 mm SynACART Cannulated Drill, 25 mm SynACART Guide, 8 mm SynACART Guide, 10 mm SynACART Guide, 20 mm SynACART Guide, 25 mm SynACART Implant Holder, 8 mm SynACART Implant Holder, 10 mm VAR-2500-08
VAR-2500-10
VAR-2500-20
VAR-2500-25
VAR-2500C
VAR-2502-08DC
VAR-2502-10DC
VAR-2502-20DC
VAR-2502-25DC
VAR-2503-08
VAR-2503-10
VAR-2503-20
VAR-2503-25
VAR-2504-08
VAR-2504-10
CARTILAGE REPAIR
SynACART
Guide
Cannulated Drill
MRI scan of osteochondritis dissecans
lesion of the medial condyle of the canine
stifle – the pervasive subchondral bone
marrow lesion is often underestimated
on standard radiography
CT scan of osteochondritis dissecans
lesion of the medial condyle of the
canine stifle – documentation of the
geographic extent of the lesion assists
pre-operative planning
Photos courtesy of Dr. Noel Fitzpatrick, Fitzpatrick Referrals, UK
CT scan postoperatively after placement
of the SynACART implant for joint
resurfacing – note the metallic base for
osseous ingrowth and the reconstruction
of the articular surface topography
30
CARTILAGE REPAIR
OATS
The Small Joint OATS system is a unique, comprehensive disposable system that contains everything
a surgeon needs for osteochondral autograft transplantation of 6 mm, 8 mm, or 10 mm diameter
cores. Each sterile set contains size-specific instrumentation such as an Alignment Rod, Tamp,
threaded and push-in core delivery caps, cannulated recipient site reamer, Donor Harvester and
a clear graft Delivery Tube that allows for full visualization of the autogenous core during implantation.
Small Joint OATS Set, 6 mm Small Joint OATS Set, 8 mm Small Joint OATS Set, 10 mm Cannulated Headed Reamer
31
AR-8981-06S
AR-8981-08S
AR-8981-10S
The microfracture picks enable easier access to hard-to-reach chondral surface defects. Sharp durable points
enable repeated precision control and the gold-coated tips provide a frame of reference for depth. The extremely
durable handles stand up to repeated malleting when used to promote fibrotic response on chondral surfaces.
Ring and Cup Curettes and Osteotomes are ideal for bone removal in both open and arthroscopic procedures.
The curettes have long shafts to allow for deeper access within the joint, and the osteotomes have ergonomic
and durable handles to allow for repeated malleting.
Chondro Pick, 20° AR-1761
CARTILAGE REPAIR
Chondro Picks/Curettes/Osteotomes
AR-8670
AR-8672
AR-8671
AR-1771
AR-1770
AR-8661
AR-8663
AR-8660
AR-8662
32
CARTILAGE REPAIR
Bio-Compression Screws
3 mm/3.5 mm Bio-Compression Screw
For fracture and osteotomy fixation in periarticular applications, this screw offers interfragmentary compression
and a headless profile to promote healing. Produced from solid enhanced PLLA and designed for excellent
thread-to-bone contact, the Bio-Compression Screw provides excellent strength during insertion and healing.
Eliminates – Metal screw removal, screw head impingement, imaging scatter
Self-compressing – Using a stepped thread pitch and a taper, this screw draws two
fragments together without the need to overdrill/lag the proximal piece
Headless and absorbable – With zero prominence above the cortex and
zero image on x-ray, this is as close to a natural repair as possible
Straightforward instrumentation – A simple low cost set ensures
proper drill depth and tapping with no guesswork
Fixation of small bone fragments – Femoral condyle, patella,
talus, metatarsals, radial head, navicular, and metacarpals
3 mm Bio-Compression Screw Instrumentation Set (AR-5025S) includes:
Bio-Compression Screw Driver, noncannulated
AR-5025DB
Small Handle w/AO Connection
AR-2001AOT
Bio-Compression Screw Dilator Tap, 20 mm
AR-5025TB
Bio-Compression Screw Driver Guide, 20 mm
AR-5025G
Bio-Compression Screw Drill Bit, 20 mm
AR-5025TD
Bio-Compression Cannulated Dilator Tap, 16 mm
AR-5025TBC-16
AR-5025TBC-18
AR-5025TBC
AR-5025TBC-22
AR-5025TBC-24
AR-5025TBC-26
Bio-Compression Screw Cannulated Drill Bit, 16 mm
AR-5025TDC-16
AR-5025TDC-18 Bio-Compression Screw Cannulated Drill Bit, 20 mm
AR-5025TDC
AR-5025TDC-22
AR-5025TDC-24
AR-5025TDC-26
Bone Reduction Forceps
AR-4160FT
Cannulated Depth Device
AR-5025DG
Guidewire w/Trocar Tip, .045”
AR-5025K
Bio-Compression Screw Instrumentation Case
AR-5025C
Implants:
Bio-Compression Screw, 3 - 3.7 mm x 16 mm
33
AR-5025B-16
AR-5025B-18
AR-5025B-20
AR-5025B-22
AR-5025B-24
AR-5025B-26
3.5 mm Bio-Compression Screw Instrumentation Set (AR-5026S) includes:
Bio-Compression Screw (Hexalobe) Driver, cannulated
AR-5026DB
Small Handle w/AO Connection
AR-13221AOC
Cannulated Depth Device
AR-5025DG
Bio-Compression Screw Driver Guide, C-Ring, 20 mm
AR-5026G
Bio-Compression Screw Drill Bit, 20 mm
AR-5026TD
Bio-Compression Dilator Tap, 16 mm
AR-5026TBC-16
AR-5026TBC-18
AR-5026TBC-20
AR-5026TBC-22
AR-5026TBC-24
AR-5026TBC-26
AR-5026TBC-28 Bio-Compression Dilator Tap, 30 mm
AR-5026TBC-30 Bio-Compression Dilator Tap, 32 mm
AR-5026TBC-32
Bio-Compression Screw Tapered Drill Bit, 16 mm
AR-5026TDC-16
AR-5026TDC-18
AR-5026TDC-20
AR-5026TDC-22
AR-5026TDC-24
Bio-Compression Screws 3.5 - 4.4 mm —5.2 mm
Bone Reduction Forceps w/ Teeth
Bio-Compression Screw Instrumentation Case
AR-5026TDC-26
AR-5026TDC-28
AR-5026TDC-30
AR-5026TDC-32
AR-4160FT
AR-5026C
Implants:
Bio-Compression Screw, 3.5 - 4.4 mm x 16 mm
AR-5026B-16
AR-5026B-18
AR-5026B-20
AR-5026B-22
AR-5026B-24
AR-5026B-26
AR-5026B-28
AR-5026B-30
AR-5026B-32
Disposables: (may be used with both sets)
Hot Loop Cutter Guidewire w/Trocar Tip, .045”
AR-4160HC
AR-5025K
Dilator Tap
Noncannulated Driver
Drill Guide (cannula)
Cannulated Driver
Tapered Drill Bit w/handle
Bio-Compression Screws,
3 - 3.7 mm x 16 mm — 26 mm
The bioabsorbable PLLA Chondral Dart has a unique, double reversed barbed design to facilitate superior
fixation and compression of osteochondral flap tears up to 2 cm inch diameter. The 18 mm long,1.3 mm
diameter Chondral Dart provides secure fixation under the hyaline cartilage surface to eliminate contact with
sensitive articulating surfaces.
Osteochondral Flap Repair Single Shot Set (AR-4009S), sterile, single use, qty. 5, includes:
Osteochondral Flap Repair Single Shot Sheath
Osteochondral Flap Repair Single Shot Dart Inserter
Osteochondral Flap Repair Single Shot Drill
Osteochondral Flap Repair Cannula
Osteochondral Flap Repair Multi-Shot Set (AR-4095S), sterile, single use, includes:
Osteochondral Flap Repair Single Shot Sheath
Osteochondral Flap Repair Single Shot Dart Inserter
Osteochondral Flap Repair Single Shot Drill
Osteochondral Flap Repair Cannula
Osteochondral Flap Repair Blunt Pin
Osteochondral Flap Repair 2-Hole Guide Sleeve
Osteochondral Flap Repair 4-Hole Guide Sleeve
Osteochondral Flap Repair Drill Pins, S, M, L and XL
CARTILAGE REPAIR
Chondral Darts
Osteochondral Flap
Repair Multi-Shot Set
AR-4095S
Osteochondral Flap
Repair Single Shot Set
AR-4009S
34
BIOLOGICS
Arthrex ACP Double Syringe System
Autologous blood products have created a growing interest for use in a number of therapies. The healing
effects of plasma are supported by growth factors released by platelets. These growth factors induce a
healing process wherever they are applied. Platelet rich plasma has been used to enhance bone healing
in fractures, wounds, tendon and ligament injuries, pain relief, and reduced scarring.
• The ACP (Autologous Conditioned Plasma) System
allows for rapid and efficient concentration of
platelets and growth factors from autologous
blood, for use at the treatment site.
• The unique double syringe design allows for
convenient and safe handling, as the whole
preparation process takes place in a closed
system.
• The ACP System is more affordable, easier
to use, and has a quicker procedure time when
compared to other conventional PRP devices.
• White and red blood cells are NOT concentrated
within the ACP system. These cells can cause a
detrimental effect on the healing process due to
release of degradative proteins and reactive
oxygen species.
ACP/Double Syringe with Cap Anticoagulant ACD-A, 50 mL Centrifuge Swing Out Rotor w/Buckets and Caps Bucket and Cap Adapter for Bucket Counterbalance Viscous-Gel High Viscosity Viscous-Spray Low Viscosity Fenestrated Delivery Needle Tuohy Delivery Needle VAR-1200S
VAR-1205
VAR-1003C
VAR-1261
VAR-1262
VAR-1263
ABS-10027
ABS-10050
ABS-10051
ABS-20000
ABS-21000
Rotor Set with Buckets
ACP Cart and Centrifuge
35
Double Syringe
Cap for Double Syringe
BIOLOGICS
Viscous-Gel and Viscous-Spray
Viscous-Gel and Viscous-Spray are used to facilitate mixing
and delivery of ACP to create an activated gel or spray.
• Quick and simple to attach/detach
• Easy to fill – no need to disassemble
• 11:1 ratio allowing homologous mixture of
ACP and a gelling agent solution, respectively
• Gelling agent solution typically consists of
thrombin and 10% calcium chloride solution –
1000 IUs thrombin: 1mL CaCl 11,12
• Use to provide a low or high viscosity
activated, gelatinous form of ACP
• Extra long, blunt, fenestrated
and beveled delivery
needles
Viscous-Gel High Viscosity
Ratio Applicator with
10 cm Mixing Tip
ABS-10050
Viscous-Spray Low Viscosity Ratio
Applicator with 3 cm Mixing/Spray Tip
ABS-10051
Fenestrated Delivery Needle
17 gauge, 14.63 cm from hub,
8 holes along first 1.27 cm of tip
(.3 mm diameter holes)
ABS-20000
Both delivery needles can be used with either
one of the Ratio Applicators and mixing tips.
Tuohy Delivery Needle
17 gauge, 15.07 cm from hub
ABS-21000
Gel easily dispersed
from tip
Precontour either
delivery needle with
the Cannula Bending Tool
AR-6650
36
BIOLOGICS
IRAP II
Defects in articular cartilage can induce osteoarthritis by causing molecular changes in the synovial
fluid. Research in molecular biology discovered the major inducer of osteoarthritis was the general
inflammatory cytokine interleukin-1 (IL-1) which plays a key role in accelerating tissue destruction
and the repair mechanisms.
In a healthy joint, IL-1 and interleukin-1 receptor antagonist (IL-1Ra) are in balanced concentrations.
In cases of osteoarthritis, there is not sufficient IL-1Ra produced to block the destructive effects of
the increased IL-1. The result is inflammation, joint pain, and eventually cartilage destruction.
In the IRAP II, monocytes (a type of white blood cell) bind to the glass beads. The cells are then
stimulated to produce regenerative and anti-inflammatory proteins without the addition of drugs.
This process takes place over an incubation period of 24 hours.
IRAP II is used to treat mild to moderate osteoarthritis.
IRAP II Equipment:
Arthrex IRAP II (Kit contains one Arthrex IRAP II device with dual ports,
one 60 mL syringe and one butterfly cannula)
Incubator Centrifuge IRAP II Rotor IRAP II Counterbalance VAR-1010
VAR-1002
VAR-1003C
VAR-1021
VAR-1012
In osteoarthritis, IL-1 is produced in
large amounts and binds to receptor
sites on the cartilage signaling cell
destruction.
In the Arthrex IRAP II System, monocytes bind to the beads stimulating the
regenerative and anti-inflammatory
proteins during incubation.
Introduction of IRAP II serum into
the joint.
The IRAP II serum has high concentrations
of regenerative and inhibitory proteins that
block the effects of destructive proteins like
IL-1, by filling the receptors on the cartilage
with IL-1Ra.
37
With over 30 years experience in the orthopaedic industry, Arthrex represents a dedicated commitment
to provide simple, safe, and reproducible surgical solutions in minimally invasive orthopaedic surgery.
Our mission is to combine the finest quality engineered products with a comprehensive program of
educational and support services to meet the needs of the veterinarian and the patient.
The Arthrex commitment to education features a surgical skills training facility located at our headquarters
in Naples, Florida, welcoming surgeons to participate in a unique, intimate, and practical lab experience
instructed by today’s leading orthopaedic surgeons. Other training facilities are located throughout the country.
EDUCATION
Continuing Education
Contact your local representative or www.ArthrexVetSystems.com for more information on our educational
programs.
Surgical Skills Training Center
Naples, Florida
Arthrex Corporate Headquarters
1370 Creekside Boulevard, Naples, Florida 34108-1945
888-215-3740 • Fax: 866-898-2059 • Website: www.arthrex.com
Scottsdale, Arizona
McDowell Mountain Medical Plaza
9377 East Bell Road, Suite 119, Scottsdale, Arizona 85260
West Coast Surgical Skills Training Center
Los Angeles, California
Kerlan-Jobe Orthopaedic Clinic
6801 Park Terrace Drive, Suite 120, Los Angeles, California 90045
Irvine, California
The University of California at Irvine (UCI)
101 The City Drive South, Building 29A, Orange, California 92868-3204
Vail, Colorado
Arthrex Medical Education Center 12 Vail Road, Suite 350, Vail, Colorado 81657
38
www.ArthrexVetSystems.com
...up-to-date technology
just a click away
©2012, Arthrex Vet Systems. All rights reserved. VLB1-0001-EN_A
U.S. PATENT NOS. 5,520,638; 5,626,613; 5,964,783; 6,117,162; 6,214,031; 6,270,503;
6,511,499; 6,592,588; 6,652,563; 6,716,234; 6,916,333; 7,029,490; 7,147,651; 7,195,634;
7,507,231; 7,803,173; 7,981,140; 7,993,369; 8,052,969; 8,062,319 and PATENTS PENDING

ARTHREX VET SYSTEMS

Transcription

Similar documents

Arthroscopy Instruments

arthroscopy instruments

Next GeNeratioN iN Knee Ligament Reconstruction and

Ask For Skeeter or Tom: (715) 546-2680

FiberWire - Arthrex Vet Systems