Grand Rock - Truck Exhaust

Transcription

Grand Rock - Truck Exhaust
1
Welcome to Grand Rock and our newest catalog. We pride ourselves on
making the finest exhaust parts in the industry, and have for 31 years. Just east of
Cleveland, Ohio in a modern 53,000 sq.ft. building and we own the best equipment
available for tube fabrication from 3” to 7” diameter, aluminized and chrome.
Please look through our new catalog, find the parts you need and a lot of our NEW
innovative products to help you profit further. Those of you who buy from us, raise
your hands... the rest of you raise your standards.
The Staff of Grand Rock
2
TABLE OF CONTENTS
3"-5" Curved Stacks ...................................................................................................... 12-14,18
4"-5" Angle Cut Stacks ............................................................................................................ 14
4"-5" Straight Stacks ................................................................................................................ 14
15°, 30°, 45°, 60° Elbows .................................................................................................. 26-27
900 Elbows ............................................................................................................. 25, 28-29, 54
Aerodynamic Heat Shields ......................................................................................................84
All 6" Stacks.................................................................................................................. 15-16, 18
All 7" Stacks............................................................................................................................. 17
Aussie Stacks ..........................................................................................................................12
Bull Horn Stacks .................................................................................................................15, 18
Clamps ....................................................................................................................... 11, 35-36
Couplers & Connectors ...........................................................................................................30
Custom Elbows........................................................................................................................29
Custom Mufflers ......................................................................................................................76
Dump Truck Stacks .................................................................................................................. 19
Exhaust Diverters & Accessories ...................................................................................... 21-22
Flexible Metal Hose ........................................................................................................... 11, 37
Ford OEM Replacement Parts .......................................................................................... 65-67
Freightliner OEM Replacement Parts ................................................................................ 72-75
Grab Handles ..........................................................................................................................87
Heat Shields ................................................................................................................ 23, 83-86
International OEM Replacement Parts .............................................................................. 61-64
Kenworth OEM Replacement Parts................................................................................... 38-46
Mack OEM Replacement Parts ......................................................................................... 56-60
Mounting Brackets ............................................................................................................. 81- 82
Mufflers ..................................................................................................................... 6-10, 76-80
Muffler Eliminators ...................................................................................................................80
Peterbilt OEM Replacement Parts ..................................................................................... 47- 55
Pipe Grab Handles ..................................................................................................................87
Powerflow Diesel Pick Up .................................................................................................. 89-93
QP Mufflers...........................................................................................................................6-10
Rain Caps ................................................................................................................................32
Reducers ................................................................................................................................. 31
Reducing Elbows .....................................................................................................................29
Resonators ..............................................................................................................................77
Stack and Muffler Mounting Brackets .......................................................................... 81- 82, 86
Sterling OEM Replacement Parts ...........................................................................................68
Straight Tubing ...................................................................................................................24, 32
Turbo & Manifold Outlets .........................................................................................................34
Universal Y-Pipes .....................................................................................................................33
V-Band Clamps........................................................................................................................35
Volvo OEM Replacement Parts ...............................................................................................71
Western Star OEM Replacement Parts ............................................................................. 69-70
3
CUSTOM FABRICATIONS
Can't find it in the catalog?
We can make most any pipe or muffler
imaginable.
No Minimum order quantity.
Custom dump truck stacks, elbows and mufflers can be
quoted quickly. See pages 20, 29, and 76.
For anything else, send us the actual pipe or muffler to
copy or fax us a sketch with every dimension and detail
possible.
Style 1
41°
90°
90°
90°
45°
4
SALES AIDS
A great way to display and sell exhaust parts.
Holds 4 pcs. of 5" dia. & 1 pc. of 4" dia.
(not included).
For safety reasons, the parts you choose to
display must not exceed 60" tall.
Approximate size 24" x 20".
Order Part No. DISPLAY
TRU
CK
EXH
AUST
SYST
EMS
24" x 36" Wall Charts
This multi-color chart is a great way to
promote sales of exhaust parts.
Order Part No. WALL CHART
5
QP MUFFLERS
5"
5"
ID
ID
7.8% Fuel Mileage Increase (avg.)
• 3% Minimum mpg. Gain or Your Money Back
2EPLACES3TOCKDiameter -UFFLERS
• Replaces Stock 10" Diameter Mufflers
.O-ORE3PACER2INGS4RUEDIA
• No More Spacer Rings, True 10" Dia.
* -UFFLER *
1UIET ASA3TOCKDiameter
• Quiet as a Stock 10" Diameter Muffler*
-EETS&EDERALAND#ALIFORNIA3OUND,EVELS
• Meets Federal and California Sound Levels
(EAVY'AUGEWELDEDCONSTRUCTION
• Heavy
Gauge, 100% Welded Construction
.O4URBO,AG&ASTER!CCELERATION
• No Turbo
Lag, Faster Acceleration
7ORKS/N!LL%NGINES
• Works
On All Engines
• Easily
Installed, Bolts in Place
%ASILY)NSTALLED"OLTSINPLACE
• Patented
2004
0ATENTED
$AY
-ONEY
"ACK'UARANTEE
• 30 Day
Money
Back
Guarantee
5"
ID
* Driving
and Acceleration
only, NOT
braking.braking.
* Driving
and Acceleration
only,engine
NOT engine
Use less fuel and improve your companyʼs
bottom line.
6
QP MUFFLERS
7
QP MUFFLERS
For Dual Exhaust Only!
The latest, most efficient sound reduction
system for 5”, 6” or 7” DUAL
(non-reduced) straight stacks
• Quiet as Stock Mufflers*
• Meets Federal and California Sound Levels
• 6.2% Fuel Mileage Increase (avg.)
• 3% HORSEPOWER Gain
• No Turbo Lag, Faster Acceleration
• Easily Installed
• Patented 2004
• Fits Inside 5”, 6” or 7” Stacks (dual only)
• Straight Stack Look WITHOUT the Noise!
* Driving and Acceleration only, NOT engine braking.
For Dual Exhaust Only!
8
QP SOUND DATA
TOTAL VEHICLE TRUCK NOISE REGULATIONS
US DOT
California Dept. of
Federal Motor Carrier
Motor Vehicles
Safety Administration
US EPA
Code #27204
Article #325.7
Article #205.52
Sect. #1 Jan. 2000
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
83dBA
1979-1987 83 dBA
1981-1987
83 dBA
1988+
80 dBA
1988+
80 dBA
*US EPA Article #205.58(C) states that mufflers can be changed as long as there is no increase in noise.
California Article #27150 and #27151VC states that exhaust can be modified as long as it doesn't increase
or amplify the sound.
QP APPLICATION
For maximum performance we recommend the following MINIMUM sizes of QP's for
your Application.
ENGINE SIZE
IN LITRE
ENGINE SIZE
IN CUBIC INCH
HORSEPOWER
RANGE
RECOMMENDED
MINIMUM
SIZE
QP PART#
5.9L
360
ANY
QP-5LC*
7.3L
445
ANY
QP-5LC*
8.3L
506
ANY
QP-6LC
10L
610
ANY
QP-5LC
11L
672
ANY
QP-5LC
11.1L
678
ANY
QP-5LC
12.7L
745
350+
QP-6LC
13L
794
350+
QP-6LC
14L
855
ANY
QP-6LC
14.6L
892
UP TO 350
QP-6LC
14.6L
892
350+
QP-6LC
14.7L
898
UP TO 350
QP-6LC
14.7L
898
350+
QP-6LC
15L
916
UP TO 400
QP-6LC
15L
916
400+
QP-7LC
16L
977
UP TO 400
QP-7LC
16L
977
400+
QP-7LC
*A single QP can be used for these smaller engines. To determine Litre Size, take your cubic inch ÷ 61.07 = Litre Size (855ci ÷ 61.07=14Litre)
For Dual Exhaust Only!
9
QP PART NUMBERS / DISPLAY
PART NUMBERS
OUR PART
NUMBER
TO FIT
STACK DIAMETER
OVERALL
LENGTH
QP-5 LC
QP-6 LC
QP-7 LC
5"
6"
7"
45"
45"
45"
For Dual Exhaust Only!
QP DISPLAY
Great way to promote and sell the QP's.
CNC routed display holds any size. Comes complete with
laminated data sheets that you, the distributor, can include
your selling price on.
10
< OR >
THE PREMIER PRE-FORMED BAND CLAMP
Built by Westfalia for Grand Rock (lap joint connections)
• Clamps come assembled with reversible
Grade 8 Hardware
• Won’t distort or pinch flexible or standard tubing
• Virtually leak-free, low emission
• 53% Thicker than the competition
• OEM Recommended
• Bright 304 Stainless and Aluminized
Step design for all up joints
Flap isolates
closing seam reduces leakage
Unique reversable Grade 8 Hardware
SIZE & PART #
ALUMINIZED
STAINLESS STEEL
Diameter
Alumized Part #
Stainless Part #
3 inch*
n/a
WFC-3
4 inch
WFC-4A
WFC-4
5 inch
WFC-5A
WFC-5
* Not bright finish
WESTFALIA TRIPLE-S FLEX HOSE
Square-cut and deburred ends
Moves Easily
in both
compression
and expansion
BLOWS AWAY ANY FLEX
YOU’VE EVER SEEN!
Extension Strap Gauge
perfect installation lengthtakes guesswork out of
proper installed length
(discard after installation)
TYPE SSS (33% THICKER)
• SPECIAL INTERLOCKED PROFILE •
The Conventional Profile!
(Conventional Interlocked Profile)
• 304 Stainless (the good stuff)
• Moves easily in both compression and expansion
• Torsional Movement (twists)
• Double wall contsruction is almost leak-free &
low emission
• In-between lengths to fit any flex application —
eliminates cutting
• Easier movement = much easier installation
• Individually boxed with installation instructions
• Longer life than other flex types
Dia.
Length
Part #
4
12
WWF-412
4
15
WWF-415
4
18
WWF-418
4
21
WWF-421
4
24
WWF-424
5
12
WWF-512
5
15
WWF-515
5
18
WWF-518
5
21
WWF-521
5
24
WWF-524
* On average
** When installed correctly
11
AUSSIE STACKS
Cool NEW Look!
30° bend with close cut.
Distinctively Different!
5" & 6" diameter.
Dia.
Length
Chrome
Part No.
5"
5"
5"
36"
48"
60"
A5-36SBC
A5-48SBC
A5-60SBC
6" Reduced to 5" OD
5" OD
Bottom
12
5" OD
Bottom
Dia.
Length
Chrome
Part No.
6"
6"
6"
36"
48"
60"
SA6-36SBC
SA6-48SBC
SA6-60SBC
CURVED STACKS
3" through 5" Diameter
I.D. INLET
O.D. INLET
Dia.
Length
Aluminized
Part No.
Chrome
Part No.
Aluminized
Part No.
Chrome
Part No.
3"
3"
12"
24"
K3-12EXA
K3-24EXA
K3-12EXC
K3-24EXC
K3-12SBA
K3-24SBA
K3-12SBC
K3-24SBC
3-1/2"
3-1/2"
3-1/2"
3-1/2"
12"
24"
36"
48"
K35-12EXA
—
—
—
K35-12EXC
K35-24EXC
K35-36EXC
K35-48EXC
K35-12SBA
K35-24SBA
K35-36SBA
—
K35-12SBC
K35-24SBC
K35-36SBC
K35-48SBC
4"
4"
4"
4"
4"
4"
4"
4"
4"
12"
18"
24"
36"
48"
60"
72"
84"
96"
K4-12EXA
K4-18EXA
K4-24EXA
K4-36EXA
K4-48EXA
K4-60EXA
—
—
—
K4-12EXC
K4-18EXC
K4-24EXC
K4-36EXC
K4-48EXC
K4-60EXC
K4-72EXC
K4-84EXC
K4-96EXC
K4-12SBA
K4-18SBA
K4-24SBA
K4-36SBA
K4-48SBA
K4-60SBA
—
—
—
K4-12SBC
K4-18SBC
K4-24SBC
K4-36SBC
K4-48SBC
K4-60SBC
K4-72SBC
—
—
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
12"
18"
24"
36"
48"
53"
60"
72"
84"
96"
108"
114"
120"
K5-12EXA
K5-18EXA
K5-24EXA
K5-36EXA
K5-48EXA
—
K5-60EXA
—
—
—
—
—
—
K5-12EXC
K5-18EXC
K5-24EXC
K5-36EXC
K5-48EXC
—
K5-60EXC
K5-72EXC
K5-84EXC
K5-96EXC
K5-108EXC
K5-114EXC
K5-120EXC
K5-12SBA
K5-18SBA
K5-24SBA
K5-36SBA
K5-48SBA
K5-53SBA
K5-60SBA
—
—
—
—
—
—
K5-12SBC
K5-18SBC
K5-24SBC
K5-36SBC
K5-48SBC
K5-53SBC
K5-60SBC
K5-72SBC
K5-84SBC
K5-96SBC
—
—
—
L
E
N
G
T
H
I.D.
L
E
N
G
T
H
O.D.
Indicates our most popular part numbers.
13
ANGLE CUT STACKS
4" and 5" Diameters
Dia.
L
E
N
G
T
H
L
E
N
G
T
H
Length
I.D. INLET
O.D. INLET
Chrome
Part No.
Chrome
Part No.
4"
4"
4"
36"
48"
60"
P4-36EXC
P4-48EXC
P4-60EXC
P4-36SBC
P4-48SBC
P4-60SBC
5"
5"
5"
5"
5"
5"
5"
5"
5"
36"
48"
60"
72"
84"
96"
108"
114"
120"
P5-36EXC
P5-48EXC
P5-60EXC
P5-72EXC
P5-84EXC
P5-96EXC
P5-108EXC
P5-114EXC
P5-120EXC
P5-36SBC
P5-48SBC
P5-60SBC
P5-72SBC
—
—
—
—
—
O.D.
I.D.
STRAIGHT STACKS
4" and 5" Diameters
I.D. INLET
O.D. INLET
Dia.
Length
Aluminized
Part No.
Chrome
Part No.
Aluminized
Part No.
Chrome
Part No.
4"
4"
4"
4"
4"
4"
4"
12"
18"
24"
36"
48"
60"
72"
S4-12EXA
S4-18EXA
S4-24EXA
S4-36EXA
S4-48EXA
S4-60EXA
S4-72EXA
S4-12EXC
S4-18EXC
S4-24EXC
S4-36EXC
S4-48EXC
S4-60EXC
S4-72EXC
—
—
S4-24SBA
S4-36SBA
S4-48SBA
S4-60SBA
S4-72SBA
—
—
S4-24SBC
S4-36SBC
S4-48SBC
—
S4-72SBC
5"
5"
5"
5"
5"
5"
5"
12"
18"
24"
36"
48"
60"
72"
S5-12EXA
S5-18EXA
S5-24EXA
S5-36EXA
S5-48EXA
S5-60EXA
S5-72EXA
S5-12EXC
S5-18EXC
S5-24EXC
S5-36EXC
S5-48EXC
S5-60EXC
S5-72EXC
—
—
S5-24SBA
S5-36SBA
S5-48SBA
S5-60SBA
S5-72SBA
—
—
S5-24SBC
S5-36SBC
S5-48SBC
S5-60SBC
—
L
E
N
G
T
H
L
E
N
G
T
H
I.D.
14
O.D.
CHROME STACK MUFFLERS
I.D.
Chrome Mufflers
Inlet
Dia.
Outlet
Dia.
Chrome
Part No.
5"
5"
6"
5"
6"
6"
CM-55C
CM-56C
CM-66C
Same length as a standard muffler
Minimal sound recduction
51"
Use 5" O.D. stacks
listed on Pgs. 12 -14
or 6" stacks listed below
• Smooth, seamless construction
• Internal core is louvered for
noise reduction
I.D.
For Dual Exhaust Only
Body
6"
6" (O.D. Bottom) Diameter Stacks
To use with CM-56C or CM-66C above
Curved
Dia.
6"
6"
6"
6"
Bull Horn
Length
24"
36"
48"
60"
Curved
Part #
Bullhorn
Part #
K6-24SBC
K6-36SBC
K6-48SBC
K6-60SBC
BH6-24SBC
BH6-36SBC
BH6-48SBC
BH6-60SBC
Angle Cut
Angle Cut
Part #
P6-24SBC
P6-36SBC
P6-48SBC
P6-60SBC
15
ALL 6" DIAMETER STACKS
Curved
6" I.D.
BOTTOM
ID
*REDUCED
TO 5" I.D.
BOTTOM
*REDUCED
TO 5" O.D.
BOTTOM
Dia.
Length
Chromed
Part No.
Chromed
Part No.
Chromed
Part No.
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
24"
36"
48"
60"
72"
84"
96"
108"
114"
120"
—
—
—
—
K6-72EXC
K6-84EXC
K6-96EXC
K6-108EXC
K6-114EXC
K6-120EXC
—
—
—
—
SK6-72EXC
SK6-84EXC
SK6-96EXC
SK6-108EXC
SK6-114EXC
SK6-120EXC
SK6-24SBC
SK6-36SBC
SK6-48SBC
SK6-60SBC
SK6-72SBC
SK6-84SBC
SK6-96SBC
SK6-108SBC
—
—
Reduced
to 5"
ID or OD
*Swedged. No welds.
Angle Cut
Dia.
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6" I.D.
BOTTOM
REDUCED
TO 5" I.D.
BOTTOM
REDUCED
TO 5" O.D.
BOTTOM
Length
Chromed
Part No.
Chromed
Part No.
Chromed
Part No.
24"
36"
48"
60"
72"
84"
96"
108"
114"
120"
—
—
—
—
P6-72EXC
P6-84EXC
P6-96EXC
P6-108EXC
P6-114EXC
P6-120EXC
—
—
—
—
SP6-72EXC
SP6-84EXC
SP6-96EXC
SP6-108EXC
SP6-114EXC
SP6-120EXC
SP6-24SBC
SP6-36SBC
SP6-48SBC
SP6-60SBC
—
—
SP6-96SBC
SP6-108SBC
—
—
ID
*Swedged. No welds.
16
Reduced
to 5"
ID or OD
Indicates our most popular part numbers.
ALL 7" DIAMETER STACKS
Curved
7" I.D.
REDUCED
TO 6" I.D. ✩
REDUCED
TO 5" I.D.
REDUCED
TO 5" O.D.
Dia.
Length
Chrome
Part No.
Chrome
Part No.
Chrome
Part No.
Chrome
Part No.
7"
7"
7"
7"
7"
7"
7"
7"
7"
7"
24"
36"
48"
60"
72"
84"
96"
108"
114"
120"
—
—
—
—
K7-72EXC
K7-84EXC
K7-96EXC
K7-108EXC
K7-114EXC
K7-120EXC
—
—
—
—
—
SK7-84EXC-6
SK7-96EXC-6
SK7-108EXC-6
SK7-114EXC-6
SK7-120EXC-6
—
—
—
—
SK7-72EXC-5
SK7-84EXC-5
SK7-96EXC-5
SK7-108EXC-5
SK7-114EXC-5
SK7-120EXC-5
SK7-24SBC-5
SK7-36SBC-5
SK7-48SBC-5
SK7-60SBC-5
SK7-72SBC-5
—
—
—
—
—
Welded on reducers
ID
Reduced
ID or OD
Bottom
✩ Limited Stock, call for availability
Angle Cut
ID
Reduced
ID or OD
Bottom
7" I.D.
REDUCED
TO 6" I.D. ✩
REDUCED
TO 5" I.D.
REDUCED
TO 5" O.D.
Dia.
Length
Chrome
Part No.
Chrome
Part No.
Chrome
Part No.
Chrome
Part No.
7"
7"
7"
7"
7"
7"
7"
7"
7"
36"
48"
60"
72"
84"
96"
108"
114"
120"
—
—
—
P7-72EXC
P7-84EXC
P7-96EXC
P7-108EXC
P7-114EXC
P7-120EXC
—
—
—
—
SP7-84EXC-6
SP7-96EXC-6
SP7-108EXC-6
SP7-114EXC-6
SP7-120EXC-6
—
—
—
SP7-72EXC-5
SP7-84EXC-5
SP7-96EXC-5
SP7-108EXC-5
SP7-114EXC-5
SP7-120EXC-5
SP7-36SBC-5
SP7-48SBC-5
SP7-60SBC-5
SP7-72SBC-5
—
—
—
—
—
Welded on reducers
✩ Limited stock, call for availability
17
BULL HORN STACKS
5" Diameter
5"
Length
O.D.
BOTTOM
I.D.
BOTTOM
36"
48"
60"
72"
84"
96"
108"
114"
BH5-36SBC
BH5-48SBC
BH5-60SBC
BH5-72SBC
—
—
—
—
—
—
—
BH5-72EXC
BH5-84EXC
BH5-96EXC
BH5-108EXC
BH5-114EXC
5"
O.D.
I.D.
6" Diameter
Length
6" I.D.
BOTTOM
REDUCED
TO 5" I.D.
REDUCED
TO 5" O.D.
36"
48"
60"
72"
84"
72"
96"
108"
114"
—
—
—
BH6-72EXC
BH6-84EXC
BH6-72EXC
BH6-96EXC
BH6-108EXC
BH6-114EXC
—
—
—
SBH6-72EXC
SBH6-84EXC
SBH6-72EXC
SBH6-96EXC
SBH6-108EXC
SBH6-114EXC
SBH6-36SBC*
SBH6-48SBC*
SBH6-60SBC*
—
—
—
—
—
—
6"
*We recommend a 6" stack mount bracket on the 6" portion of the stack.
Swedged, No Welds.
REDUCED TO
I.D. BOTTOM
6"
REDUCED TO
O.D. BOTTOM
7" Diameter
7"
REDUCED TO
I.D. BOTTOM
7"
REDUCED TO
O.D. BOTTOM
Length
7" I.D.
BOTTOM
REDUCED
TO 5" I.D.
REDUCED
TO 5" O.D.
36"
48"
60"
72"
84"
96"
108"
114"
—
—
—
BH7-72EXC
BH7-84EXC
BH7-96EXC
BH7-108EXC
BH7-114EXC
—
—
—
SBH7-72EXC5
SBH7-84EXC5
SBH7-96EXC5
SBH7-108EXC5
SBH7-114EXC5
SBH7-36SBC5*
SBH7-48SBC5*
SBH7-60SBC5*
—
—
—
—
—
* We recommend a 7" stack mount bracket on the 7" portion of the stack.
Welded on reducers
18
DUMP TRUCK STACKS
Style 1
Style 3
Style 2
C
B
C
A
90°
Overall
Height
90°
90°
Overall
Height
Overall
Height
90°
UNIVERSAL
TURN-OUT
90°
A
A
B
B"
Style 6
Style 5
Style 4
B
C
C
60°
Overall
Height
45°
45°
A
Overall
Height
Overall
Height
A
A
45°
45°
UNIVERSAL
TURN-OUT
B
B
Style
Inlet
A
B
C
Overall Height
Aluminized Part#
Chrome Part#
Notes
1
1
1
1
1
4" OD
5" OD
5" ID
5" OD
5" OD
10.5
10.5
10.5
10.5
18
16
16
16
19
16
24
24
24
24
24
30.5
29.5
29.5
29.5
37
ED-4LA
ED-5LA
ED-5LEXA
UM-5LA
ED-4LC
ED-5LC
ED-5LEXC
WED-5LC
UM-5LC
Most Popular
Wide Popular Pipe
1
1
1
1
5" OD
5" ID
5" OD
5" ID
11.75
11.75
18
18
16.25
16.25
19
19
21.5
21.5
29
29
28.25
28.25
42
42
DTS-5A
-
DTS-5C
DTS-5EXC
SW-K5C
SW-K5EXC*
2
2
2
4" OD
5" OD
5" ID
18
18
18
19
19
19
27
27
27
41
40
40
JDS-4A
JDS-5A
JDS-5EXA
JDS-5C
JDS-5EXC*
3
3
4" ID
5" OD
60
12
27
18
-
60
12
-
CSP-460EXC
CSP-51218SC
4
4
4" OD
5" OD
8
8
12
12
12
12
16.5
16.5
OB-560A
OB-460C
OB-560C
5
5" OD
14.8
11.6
21
42.8
FEC-5SA
FEC-5SC
6
5" OD
14.8
11.6
25
46.75
FEC-5KA
FEC-5KC
Ideal for R& RD Macks, won't block mirror
-
DM Mack
* Limited stock, call for availability
Indicates our most popular part numbers.
19
DUMP TRUCK STACKS
Custom made to your specs
Quantity ________________________________________
Diameter _______________________________________
Curved or Straight Top _____________________________
Expanded (ID) or
Straight (OD) Bottom ______________________________
A Dimension ____________________________________
B Dimension ____________________________________
C Dimension ____________________________________
Plain, Aluminized or Chrome _______________________
Minimum Dimensions
4" Dia.
5" Dia.
A
9"
10-1/2"
B
12"
16"
C
with
curved
top
12"
16"
C
with
straight
or angle
cut top
7"
8"
Fill in the blanks and fax this sheet to (440) 639-2010 for quote.
Lead time on Non-Chrome Parts — 10-20 Days
Lead time on Chrome Parts — 4-6 Weeks
20
EXHAUST DIVERTERS & ACCESSORIES
HDT-49090A
HDT-59090A
HDT-4A
HDT-5A
Tube Type
Tube Type
Tube Type
Tube Type
Ideal for Mack Granite
4" OD
4"
ID
5"
ID
4"
OD
5"
OD
4" OD
5" OD
5" OD
4" OD
HB-4
HB-5
2 Position only
4" ID Holes
2 Position only
5" ID Holes
5" OD
SDB-5
SP-5
4 Position
2 Partial Diversion
5" ID Holes
Spring Plate
Use for heated
dump bed
7"
7"
5" HOLE
7"
3-1/2"
7"
TUBES
Weld these or elbows directly to diverter boxes or spring plate.
5"
I.D.
5"
O.D.
BT-54A
BT-5EXA
BT-5A
5"
4"
O.D.
5"
BT-54EXA
4"
I.D.
5"
4"
4"
4"
BT-4A
4"
4"
Balls
Bells
BT-4EXA
4"
I.D.
4"
O.D.
4"
Dia.
Aluminized
Part No.
Dia.
Aluminized
Part No.
4"
5"
TBE-4
TBE-5
4"
5"
TBA-4
TBA-5
O.D.
I.D.
21
STAINLESS STEEL HEAT DIVERTERS & ACCESSORIES
HB-4SS
HB-5SS
SP-5SS
304 Stainless Steel
4" ID Holes
304 Stainless Steel
5" ID Holes
Use for heated dump bed
Spring Plate
(/,%
304 STAINLESS STEEL TUBES
Weld these or elbows directly to diverter boxes or spring plate.
BT-5SS
5"
I.D.
5"
O.D.
5"
4"
4"
BT-4SS
BT-4EXSS
4"
O.D.
4"
I.D.
4"
22
BT-5EXSS
4"
BT-54SS
4"
O.D.
BT-54EXSS
5"
4"
4"
I.D.
5"
4"
UNIVERSAL HEAT SHIELDS
UNIVERSAL HEAT SHIELDS:
• Heat shield for exhaust pipe
• Protect wires, air, oil or fuel lines from
extreme heat
• Universal fit, any diameter pipes
• Held on with strap clamp (included)
EXHAUST PIPE
8"
• Keep wiring and hydralic lines away
from hot exhaust pipes
EXHAUST PIPE
1" gap
• Works on 3"- 6" diameter pipes
23
APU TIE IN PIPES
8"
5"
ID
5"
ID
A
Dia. OD
• Exhaust your APU/Generator into your
exhaust systems
• Keeps fumes from under your truck
• Available in 3 sizes
A Dia.
Part Number
1.5"
1.75"
2"
APU-1.5
APU-1.75
APU-2.0
REPAIR SECTIONS
Dia.
• Perfect for splicing in sections
• 16ga Aluminized Steel
24
4"
4"
4"
4"
4"
5"
5"
5"
5"
5"
Length
Part Number
12"
18"
24"
36"
48"
12"
18"
24"
36"
48"
RS-412A
RS-418A
RS-424A
RS-436A
RS-448A
RS-512A
RS-518A
RS-524A
RS-536A
RS-548A
90° TANGENT CUT ELBOWS
A LENGTH
B
L
E
N
G
T
H
O.D.
DIAMETER
90˚
• Cut at tangent NO straight
• Ideal for welding & repairing
• OD/OD only
O.D.
DIAMETER
Dia
Length
A&B
Center Line
Radius
Aluminized
Part#
3"
3 1/2"
4"
5"
6"
7"
8"
5"
6 3/4"
6 1/2"
8"
10"
11 1/2"
20"
3 1/2"
5"
4 1/2"
5 1/2"
7"
8"
12"
L390-0505SA
L3590-675675SA
L490-6565SA
L590-0808SA
L690-1010SA
L790-1212S*
L890-2020S*
* Cold rolled steel and make to order, call for leadtime
25
U-BENDS
Ideal for those “not so standard” jobs that require fabrication
• Cover more bend angles and “odd ball” leg lengths
Dia
CLR
B1
(
Degree
of Bend
B2
)
(
Degree
of Bend
L1
L2
Aluminized
Part# OD
)
4"
4"
4"
4.5
4.5
4.5
15
45
60
30
60
75
12”
12”
12”
30”
30”
30”
U4-1530
U4-4560
U4-6075
5"
5"
5"
5.5
5.5
5.5
15
45
45
30
60
75
12”
12”
12”
30”
30”
30”
U5-1530
U5-4560
U5-4575
Misc Bends
Part #
3"
3.5"
4"
5"
Misc Bend 3
Misc Bend 35
Misc Bend 4
Misc Bend 5
60°
26
Dia
45°
• Various degree bends (NO 90º)
• Mix of Aluminized and Cold Rolled
• ID/OD ends
• Ideal for “do-it-yourselfers”
• Good usable bends
• Order by diameter only
• Check for availabilty
67°
ELBOWS
15° Elbows
B
L
N
G
3"
4"
3-1/2""
L315-0404A
L315-0404SA
3-1/2"
4"
5"
L3515-0404A
L3515-0404SA
4"
4"
4-1/2"
L415-0404A
L415-0404SA
5"
4"
5-1/2"
L515-0404A
L515-0404SA
D I
IA .D
M .
ET
ER
H
T
Aluminized
Part No.
E
Aluminized
Part No.
O.D.
Length Center Line
A&B
Radius
O.D. O.D.
DIAMETER
Dia.
A LENGTH
I.D. O.D.
Aluminized
Part No.
Aluminized
Part No.
3-1/2"
L330-0404A
L330-0404SA
B
L
N
O.D. O.D.
3"
Length Center Line
A&B
Radius
4"
3-1/2"
4"
5"
L3530-0404A
L3530-0404SA
4"
4"
4-1/2"
L430-0404A
L430-0404SA
5"
4"
5-1/2"
L530-0404A
L530-0404SA
D O
IA .
M D
ET .
ER
Dia.
H
T
G
I.D. O.D.
E
O.D.
30° Elbows
DIAMETER
A LENGTH
45° Elbows
O.D. O.D.
I.D. O.D.
Dia.
Length Center Line
Radius
A&B
Aluminized
Part No.
Chrome
Part No.
Aluminized
Part No.
Chrome
Part No.
3"
8"
4"
L345-0808A
L345-0808C
L345-0808SA
—
3-1/2"
9"
5"
L3545-0909A
—
L3545-0909SA
—
4"
4"
4"
6"
9"
12"
4-1/2"
4-1/2"
4-1/2"
L445-0606A
L445-0909A
L445-1212A
—
L445-0909C
—
L445-0606SA
L445-0909SA
L445-1212A
—
L445-0909SC
—
5"
5"
8"
12"
5-1/2"
5-1/2"
L545-0808A
L545-1212A
L545-0808C
L545-1212C
L545-0808SA
L545-1212SA
L545-0808SC
L545-1212SC
6"
15"
6"
L645-1515A
L645-1515C
L645-1515SA
L645-1515SC
60° Elbows
O.D. O.D.
I.D. O.D.
Dia.
Length Center Line
A&B
Radius
Aluminized
Part No.
Chrome
Part No.
Aluminized
Part No.
Chrome
Part No.
3"
3-1/2"
8"
8"
3-1/2"
5"
L360-0808A
L3530-0808A
—
—
L360-0808SA
L3560-0808SA
—
—
4"
4"
8"
12"
4-1/2"
4-1/2"
L460-0808A
L460-1212A
—
—
L460-0808SA
L460-1212SA
—
—
5"
5"
10"
16"
5-1/2"
5-1/2"
L560-1010A
L560-1616A
L560-1010C
—
L560-1010SA
L560-1616SA
L560-1010SC
—
Indicates our most popular part numbers.
27
90° ELBOWS
Dia.
Length Center Line
Radius
A&B
I.D. O.D.
Aluminized
Part No.
Chrome
Part No.
3"
3"
3"
7"
10"
14"
4"
4"
4"
L390-0707A
L390-1010A
L390-1414A
L390-0707C
L390-1010C
L390-1414C
3-1/2"
3-1/2"
3-1/2"
8"
12"
16"
5"
5"
5"
L3590-0808A
L3590-1212A
L3590-1616A
—
L3590-1212C
—
4"
4"
4"
4"
4"
4"
8"
10"
12"
15"
18"
18 x 29"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
L490-0808A
L490-1010A
L490-1212A
L490-1515A
L490-1818A
L490-1829A
L490-0808C
L490-1010C
L490-1212C
L490-1515C
L490-1818C
L490-1829C
5"
5"
5"
5"
5"
5"
5"
10"
12"
15"
18"
18 x 32"
13.5"
17.5"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
8
8
L590-1010A
L590-1212A
L590-1515A
L590-1818A
L590-1832A
L590-1313A-8
L590-1818A-8
L590-1010C
L590-1212C
L590-1515C
L590-1818C
L590-1832C
—
—
6"
6"
13"
24"
7"
7"
L690-1313A
—
L690-1313C
L690-2424C
B LENGTH
O.D.
DIAMETER
A
L
E
N
G
T
H
90˚
I.D.
DIAMETER
NOTE: Leg lengths are
measured to the backside, not center line
Dia.
B
A LENGTH
O.D.
DIAMETER
A
B
L
E
N
G
T
H
90˚
O.D.
DIAMETER
28
Length Center Line
Radius
A&B
O.D. O.D.
Aluminized
Part No.
Chrome
Part No.
3"
3"
3"
3"
6"
7"
10"
14"
4"
4"
4"
4"
L390-0606SA
L390-0707SA
L390-1010SA
L390-1414SA
—
—
L390-1010SC
L390-1414SC
3-1/2"
3-1/2"
3-1/2"
8"
12"
16"
5"
5"
5"
L3590-0808SA
L3590-1212SA
L3590-1616SA
—
L3590-1212SC
—
4"
4"
4"
4"
4"
4"
4"
6"
8"
10"
12"
15"
18"
18 x 29"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
L490-0606SA
L490-0808SA
L490-1010SA
L490-1212SA
L490-1515SA
L490-1818SA
L490-1829SA
—
L490-0808SC
L490-1010SC
L490-1212SC
L490-1515SC
L490-1818SC
L490-1829SC
5"
5"
5"
5"
5"
5"
5"
5"
8"
10"
12"
15"
18"
18 x 32"
13.5"
17.5"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
8
8
L590-0808SA
L590-1010SA
L590-1212SA
L590-1515SA
L590-1818SA
L590-1832SA
L590-1313SA-8
L590-1818SA-8
—
L590-1010SC
L590-1212SC
L590-1515SC
L590-1818SC
L590-1832SC
—
—
6"
6"
13"
24"
7"
7"
L690-1313SA
—
L690-1313SC
L690-2424SC
Indicates our most popular part numbers.
REDUCING 90° ELBOWS
6" to 5"
5" to 4"
SL690-1313SC (5" O.D.)
SL690-1313C (5" I.D.)
IH-275-5C
7" to 5"
6" to 4"
SL7901616C5 (5" I.D.)
SL7901616SC5 (5" O.D.)
SL7902424SC5 (5" O.D.)
SL7902424C5 (5" I.D.)
IH-275-6C
CUSTOM ELBOWS
A LENGTH
B
90˚
Measure to center line
Lead time – Aluminized 10-20 Days
Chrome – 4-6 Weeks
L
E
N
G
T
H
Less than 90°
90°
Quantity ____________________________________
Diameter ___________________________________
Degree of Bend ______________________________
A Dimension ________________________________
B Dimension ________________________________
A or B Expanded (I.D.) ________________________
Aluminized or Chrome ________________________
Quantity _____________________________________
Diameter ____________________________________
Degree of Bend _______________________________
A Dimension _________________________________
B Dimension _________________________________
A or B Expanded (I.D.) _________________________
Aluminized or Chrome _________________________
Measure to backside
29
COUPLERS & CONNECTORS
COUPLERS I.D.-I.D.
LENGTH
Dia.
I. D.
DIAMETER
I. D.
DIAMETER
3"
3-1/2"
4"
5"
6"
7"
Length Aluminized
Part No.
8"
8"
8"
8"
8"
8"
CP-38A
CP-358A
CP-48A
CP-58A
CP-68A
_
Chrome
Part No.
—
CP-358C
CP-48C
CP-58C
CP-68C
CP-78C
CONNECTORS I.D.-O.D.
LENGTH
Dia.
3"
3-1/2"
4"
5"
6"
Length Aluminized
Part No.
6"
6"
6"
6"
6"
CN-36A
CN-356A
CN-46A
CN-56A
CN-66A
Chrome
Part No.
—
—
—
CN-56C
CN-66C
O. D.
DIAMETER
I. D.
DIAMETER
CONNECTORS O.D.-O.D.
LENGTH
O. D.
DIAMETER
30
O. D.
DIAMETER
O.D.
Dia.
Length
Aluminized
Part No.
3"
3-1/2"
4"
5"
6"
8"
8"
8"
8"
8"
S3-8SBA
S35-8SBA
S4-8SBA
S5-8SBA
S6-8SBA
Indicates our most popular part numbers.
REDUCERS
REDUCERS O.D.-I.D.
O.D. Diam- I.D. Diameter
eter
3-1/2"
4"
4"
5"
6"
6"
7"
3"
3"
3-1/2"
4"
4"
5"
5"
Reducers
Length
Aluminized
Part No.
8"
8"
8"
8"
8"
8"
8"
R35O-3IA
R4O-3IA
R4O-35IA
R5O-4IA
R6O-4IA
R6O-5IA
—
Chrome
Part No.
LENGTH
—
—
R4O-35IC
R5O-4IC
—
R6O-5IC
R70-5IC
I.D.
DIAMETER
O.D.
DIAMETER
REDUCERS I.D.-O.D.
LENGTH
I.D. Diam- O.D. Diameter
eter
O.D.
DIAMETER
I.D.
DIAMETER
4"
4"
5"
6"
6"
7"
3"
3-1/2"
4"
4"
5"
5"
Reducers
Length
Aluminized
Part No.
Chrome
Part No.
8"
8"
8"
8"
8"
8"
R4I-3OA
R4I-35OA
R5I-4OA
R6I-4OA
R6I-5OA
—
—
—
R5I-4OC
—
R6I-5OC
R7I-5OC
REDUCERS I.D.-I.D.
LENGTH
I.D. Diam- I.D. Diameter
eter
3-1/2"
4"
4"
5"
6"
6"
7"
3"
3"
3-1/2"
4"
4"
5"
5"
Reducers
Length
Aluminized
Part No.
8"
8"
8"
8"
8"
8"
8"
R35I-3IA
R4I-3IA
R4I-35IA
R5I-4IA
R6I-4IA
R6I-5IA
—
Chrome
Part No.
—
—
—
R5I-4IC
—
R6I-5IC
R7I-5IC
I.D.
DIAMETER
I.D.
DIAMETER
REDUCERS O.D.-O.D.
LENGTH
O.D. Diam- O.D. Diameter
eter
O.D.
DIAMETER
O.D.
DIAMETER
Indicates our most popular part numbers.
3-1/2"
4"
4"
5"
6"
6"
7"
3"
3"
3-1/2"
4"
4"
5"
5"
Reducers
Length
Aluminized
Part No.
Chrome
Part No.
8"
8"
8"
8"
8"
8"
8"
R35O-3OA
R4O-3OA
R4O-35OA
R5O-4OA
R6O-4OA
R6O-5OA
—
—
—
—
—
—
—
R70-5OC
31
RAIN CAPS
Dia.
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/2"
4"
4-1/2"
5"
6"
Zinc
Part No.
Chrome
Part No.
RC-200
RC-225
RC-250
RC-275
RC-300
RC-350
RC-400
RC-450
RC-500
RC-600
—
—
—
—
RC-300C
RC-350C
RC-400C
RC-500C
RC-600C
STRAIGHT TUBING
O.D. / O.D.
Dia.
3"
3-1/2"
4"
5"
6"
7"
8"
10"
Length
120"
120"
120"
120"
120"
120"
120"
12"
Plain
Part No.
Aluminized
Part No.
S3-120SB
S35-120SB
S4-120SB
S5-120SB
S6-120SB
S7-120SB
—
—
S3-120SBA
S35-120SBA
S4-120SBA
S5-120SBA
S6-120SBA
S7-120SBA
S8-120SBA
S10-120SBA
I.D. / I.D.
NOTE: Too Large for UPS, must ship by truck
32
Dia.
Length
Aluminized
Part No.
3"
3-1/2"
4"
5"
6"
120"
120"
120"
120"
120"
S3-120EXEXA
S35-120EXEXA
S4-120EXEXA
S5-120EXEXA
S6-120EXEXA
Indicates our most popular part numbers.
UNIVERSAL Y PIPES
NO DIVIDER PLATE
WITH DIVIDER PLATE
“Type A”
NO DIVIDER PLATE
Dia. Width Height
WITH DIVIDER PLATE
Aluminized
Part No.
Aluminized
Part No.
3"
12"
10"
Y-300NPA
–
–
3-1/2"
14"
10"
Y-350NPA
–
–
4"
4"
12"
26"
8"
12"
Y-401NPA
–
–
Y-400A
–
–
5"
16"
11"
Y-501NPA
–
–
5"
25"
14"
Y-500NPA
Y-500A
Y-500C
“Type B”
Dia. Width Height
3"
Chrome
Part No.
“Type C”
Aluminized
Part No.
Dia.
3"
10-1/2"
16"
YB-300A
3-1/2" 10-1/2"
16"
YB-350A
Width Height
7-1/8"
3-1/2" 7-11/16"
Aluminized
Part No.
10"
YC-300A
10"
YC-350A
4"
10-1/2"
16"
YB-400A
4"
9-15/32"
12"
YC-400A
5"
10-1/2"
16"
YB-500A
5"
10-27/32"
13"
YC-500A
Indicates our most popular part numbers.
33
TURBO & MANIFOLD OUTLETS
Part#
Degree
of
Bend
A
B
PB-13002
85
6"
7"
PB-13430
58
4-21/32
5-21/32
FL-16460
35
2-1/2"
5"
KW-15565
22
5-11/16"
5-7/16"
WS-3520
20
3-5/16"
8-1/2"
All are Aluminized and have Pyrometer Fittings
TURBO & MANIFOLD OUTLETS
TYPE A
Part No.
TYPE A
Part
Length
Tube
Dia.
Flange
Dia.
Fits
Use V-Band
Clamp No.
2"
6"
6"
4"
4"
6"
4"
4"
4"
4"
4"
6"
6"
6"
6"
2-3/4"
3"
3-1/2"
3-1/2"
3-1/2"
4"
4"
4"
4"
4"
5"
5"
5"
5"
5"
3.21"
3.75"
4.00"
4.07"
4.25"
4.5"
4.61"
4.61"
4.75"
4.75"
5.25"
5.5"
5.88"
5.88"
5.88"
5.9B cummins
—
Detroit Diesel
3208T Cat
7.3 Ford Powerstroke
Cummins
3306 Cat
Most 6 Cyl. Macks
L10 Cummins & 3176 Cat
8.2T Detroit
6V & 8V92T Detroit
N14 & ISX Cummins
3406 & C15 Cat
855 C.I. Cummins W/T50 Turbo
60 Series Detroit
VB-321C
—
—
VB-419C
—
—
VB-461D
VB-461M
VB-475C
VB-475D
VB-525D
—
VB-588C
VB-588C
VB-588C
T321-2
T375-6
T400-6
T407-4
T425-4
T450-6
T461-4
T461-4
T475-4
T475-4
T525-4
T550-6
T588-6
T588-6
T588-6
TUBE DIA.
O.D.
PART
LENGTH
22o
FLANGE DIA.
TYPE B
TYPE B
Part No.
Part
Length
Tube
Dia.
Flange
Dia.
Fits
T362-6ID
T425-6ID
T475-6ID
6"
6"
6"
3" O.D./3" I.D.
3-1/2" O.D./3-1/2" I.D.
4" O.D./4" I.D.
3.62"
4.25"
4.75"
D.D. 6V71
D.D. 8V71
D.D. 671/12V71
If a Pyrometer fitting is needed, add "PYRO" to the part number.
All of these parts are aluminized.
TURBO REPAIR FLANGES
Replaces cracked flanges
A
C (I.D.)
Part No.
TRF-4625
TRF-475
TRF-588
A
Dia.
B
Length
C
Dia.
4.625”
4.75”
5.88”
2”
2”
2”
4”
4”
5”
Application
ID
Replaces Cat#9N-6325
T35 Turbo, L10 & 3176
T50 Turbo, N14, ISX, 3406, C15, 60 Series
B
34
Indicates our most popular part numbers.
CLAMPS
V-BAND CLAMPS
Part No.
Fits
Replaces OEM Part No.
VB-321C
VB-419C
VB-413C
VB-461D
VB-588C
VB-475C
VB-588C
VB-475D
VB-525D
VB-588C
VB-419F
VB-461M
3903652
IW5455
3905216
IW2431
186917
115774
186917
154977
513262
23506159
E2HZ5A231A
48RU2341
5.9 B Cummins
3208TCat
8.3C Cummins
3306 Cat
3406 Cat W/T50 Turbo
L-10 Cummins & 3176 Cat
855 C.I. Cummins W/T50 Turbo
8.2 T Detroit
6V & 8V92T Detroit
All 60 Series Detroit
6.6 & 7.8 Ford
Most 6 Cyl. Macks
V-BAND CLAMP
Part No.
VB-588OE
Application
T50 Turbohousings, N14, ISX, 3406, C15, 60Series
This is the more economical 1 pc OE version
ROUND BOLT
ROUND BOLT
ROUND BOLT
FLAT BOLT
OPEN
SADDLE
CLOSED SINGLE
SADDLE
CLOSED DOUBLE
SADDLE
CLOSED DOUBLE
SADDLE
(Economy)
(Good)
(Better)
(Best)
* Not recommended for joining 2 chrome pipes
Dia.
ROUND BOLT
OPEN SADDLE
Economy Clamp
(Plain Steel)
HD GUILLOTINE
SINGLE EDGE
SADDLE
(Zinc Plated)
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/2"
4"
4-1/2"
5"
6"
7"
—
—
—
—
RO-3
RO-35
RO-4
—
RO-5
—
—
RB-2ZN
RB-225ZN
RB-25ZN
RB-275ZN
RB3ZN
RB-35ZN
RB-4ZN
RB-45ZN
RB-5ZN
RB-6ZN
—
Indicates our most popular part numbers.
HD GUILLOTINE
SINGLE EDGE
SADDLE
(Chrome)
—
—
—
—
RB-3C
RB-35C
RB-4C
—
RB-5C
RB-6C
—
ROUND BOLT
HD WELDED
SADDLE
(Zinc Plated)
FLAT BOLT
HD WELDED
SADDLE
(Zinc Plated)
—
—
—
—
HD-3ZN
HD-35ZN
HD-4ZN
—
HD-5ZN
—
—
—
—
—
—
—
—
FB-4ZN
—
FB-5ZN
FB-6ZN
—
FLAT BOLT
HD WELDED
SADDLE
(Chrome)
—
—
—
—
—
—
FB-4C
—
FB-5C
FB-6C
FB-7C
35
CLAMPS
3 3/8" WIDE
3" WIDE
3" WIDE
ValueSeal™ EasySeal™
Flexible
Seal Clamps Clamps* Clamps*
(Good)
(Better)
(Better)
3" WIDE
11/4" WIDE
3" WIDE
TorcTite™
Preformed
Clamps*
AccuSeal™
Clamps*
Westfalia™
Clamps
(Better)
(Best)
(Best)
Dia.
Aluminized
Part #
Stainless
Part #
Dull
Stainless
Bright
Stainless
Part#
Aluminized
Part#
Stainless
Bright
Part #
Stainless
Part#
Aluminized
Part#
Bright
Stainless
Part #
Aluminized
Bright
Part#
Staineless
Part#
2"
—
FL-2
—
—
PF-2A
PF-2
—
AS-2A
—
—
—
2-1/4"
—
FL-225
—
—
PF-225A
PF-255
2-1/2"
—
FL-25
—
—
PF-25A
PF-25
—
—
—
—
—
—
AS-25A
—
—
—
2-3/4"
—
FL-275
—
—
PF-275A
PF-275
—
—
—
—
—
3"
—
FL-3
—
EZ-3
PF-3A
PF-3
—
AS-3A
—
—
WFC-3**
3-1/2"
—
FL-35
—
EZ-35
PF-35A
PF-35
—
AS-35A
—
—
—
4"
FL-4A
FL-4
VS-4
EZ-4
PF-4A
PF-4
—
AS-4A
AS-4P
WFC-4A
WFC-4
4-1/2"
—
—
—
—
—
—
—
—
—
—
—
5"
FL-5A
FL-5
VS-5
EZ-5
PF-5A
PF-5
PF-5P
AS-5A
AS-5P
WFC-5A
WFC-5
6"
—
FL-6
—
—
—
—
PF-6P
—
AS-6P
—
—
7"
—
—
—
FLP-7P
—
—
—
—
AS-7P
—
—
* Original TORCA product.
** NOT bright finish
AccuSeal, TorcTite, and EasySeal are all trademarks of Torca Products.
36
Indicates our most popular part numbers.
FLEXIBLE METAL HOSE
10' and 25' COILS
Dia.
Std. Duty
Galvanized
25' Roll
2"
2.25"
2.5"
2.75"
3"
3.5"
4"
5"
6"
7"
G15-2300
G15-225300
G15-25300
G15-275300
G15-3300
G15-35300
G15-4300
G15-5300
—
—
Std. Duty Heavy Duty Heavy Duty
Heavy Duty
Galvanized Galvanized 304 Stainless 304 Stainless
10' Roll
25' Roll
25' Roll
10' Roll
—
—
—
—
GF-3120
GF-35120
GF-4120
GF-5120
GF-6120
—
—
—
—
—
—
—
G18-4300
G18-5300
—
—
—
—
—
—
SF-3120
SF-35120
SF-4120
SF-5120
SF-6120
SF-7120
—
—
—
—
SF-3300
SF-35300
SF-4300
SF-5300
—
—
We are pleased to announce the arrival of the Westfalia Stainless Flex Hoses!
Superior flexability and torsional movement make this the finest flex the
industry has ever seen!
Various Pre-Cut Lengths:
PRECUT LENGTHS
Dia.
Length
Heavy Duty
Galvanized
Heavy Duty
304 Stainless
3"
3"
3"
12"
18"
36"
—
GF-318
—
—
—
SF-336
3.5"
3.5"
3.5"
18"
24"
36"
—
—
GF-3536
SF-3518
SF-3524
SF-3536
4"
4"
4"
4"
4"
12"
18"
24"
36"
48"
GF-412
GF-418
GF-424
GF-436
GF-448
*SF-412
*SF-418
*SF-424
*SF-436
*SF-448
5"
5"
5"
5"
5"
12"
18"
24"
36"
48"
GF-512
GF-518
GF-524
GF-536
GF-548
*SF-512
*SF-518
*SF-524
*SF-536
*SF-548
• Deburred Ends
• Save the Time and Hassle of Cutting
• Easier to Inventory and Handle
• Easier to Display
MADE IN
THE USA
NOTE: All Grand Rock Flex is measured in EXTENDED lengths.
• Compression may occur during handling and transit
• DO NOT attempt to cut Westfalia precut flex at all
* Marked stainless flex is a superior quality genuine
Westfalia product manufactured in the USA for Grand Rock.
Indicates our most popular part numbers.
37
KENWORTH
W900B,L, & T600 or T800 with single exhaust layout – right side
Not Aerocab (Both of these layouts have mufflers that are mounted to the side of
cab in front of the sleeper.)
1982 + model Years
T588-6PYRO
TO MUFFLER
KW-14122
KW-8049
KW-14764R
OR
KW-14764RC
SF-512
Dual exhaust layout
T588-6PYRO
OR
KW-14764RC .............5"
OR
KW6-14764RC...........6"
OR
KW7-14764RC...........7"
KW-14122
SF-512
KW-15565
KW-14766
OR
KW-18028
KW-18531
SF-512
KW-14764LC .............5"
OR
KW6-14764LC ...........6"
OR
KW7-14764LC ...........7"
SF-512
KW-13637
This is to the best of our knowledge & research. We cannot guarantee these are the correct parts.
38
KENWORTH REPLACEMENT PARTS
W900A 1982 & older
Rep: K180-10742RCP
KW-12975
KW-13088
KW-10742LC
KW6-10742RC
(Chrome)
Rep: K180-10742CP
6" reduced to 5" (Right)
Replaces: K180-12975
(Cummins Application)
Replaces: K180-13088
(Cat Application)
Rep: K180-10742R
6" reduced to 5" (Left)
KW-10742RC
KW7-10742RC
(Chrome)
7" reduced to 5" (Right)
Rep: K180-10742
KW6-10742LC
KW7-10742LC
7" reduced to 5" (Left)
(Left)
W900B, L, T600 & T800 1982 to current
T588-6 PYRO
KW-14122
KW-6326
Replaces: K130-166
Replaces: K180-14122
Replaces: K180-6326
30°
27°
30°
27°
KW-8049
KW-18028
KW-13637
Replaces: K180-8049
Replaces: K180-18028
Replaces: K180-13637
°
45°
KW-14766
KW-14765
KW-8047
Replaces: K180-14766
Replaces: K180-14765
Replaces: K180-8047
45°
45°
90°
45°
* One piece construction
39
KENWORTH REPLACEMENT
KENWORTH REPLACEMENT
PARTS
PARTS
W900B, L, T600 & T800 1982 to current
KW-HE18
KW-17876
KW-17876C
Rep: 17HE-18
Rep: K180-17876
(Chrome)
Rep: K180-17876CP
60°
60°
°
Muffler inlet pipe mounted behind
cab on mast.
Muffler inlet pipe mounted behind
cab on mast.
KW-14764L
KW-14764LC
KW-14764R
Rep: K180-14764
(Chrome)
Rep: K180-14764CP
Rep: K180-14764R
90°
90°
90°
45°
45°
45°
KW-14764RC
KW6-14764LC
(Chrome)
Rep: K180-14764RC
6" reduced to 5" (Left Chrome)
KW6-14764RC
6" reduced to 5" (Right Chrome)
6"
O.D.
6"
O.D.
90°
90°
90°
45°
45°
45°
7"
O.D.
KW7-14764LC
7" reduced to 5" (Left Chrome)
KW7-14764RC
STACK MOUNT BRACKETS
7" reduced to 5" (Right Chrome)
90°
7"
O.D.
90°
45°
(Polished Stainless Steel)
Dia. Stainless Steel
Part No.
5"
6"
7"
MB-5KWS
MB-6KWS
MB-7KWS
45°
✩ Requires modification of cab bottom trim.
*Because of the extra height of the elbow, use
a 1 foot shorter stack than originally planned
(i.e.: 96" instead of 108" etc).
40
✩ Requires modification of cab bottom trim.
*Because of the extra height of the elbow, use
a 1 foot shorter stack than originally planned
(i.e.: 96" instead of 108" etc).
Bolts directly onto factory cab brackets.
KENWORTH REPLACEMENT PARTS
W900B, L, T600 & T800 1982 to current
KW-14729LC
KW-14729RC
KW-15565
(Chrome)
Replaces: K180-14729CP
(Chrome)
Replaces: K180-14729RCP
Replaces: K180-15565
90º
90º
20º
20º
KW-16469
KW-18959
KW-18531
Replaces: K180-16469
Replaces: K180-18959
Replaces: K180-185
27°
27°
Behind sleeper mounted exhaust
KW6-14764LCID
Rep: K180-14764CP
Chrome
KW6-14764RCID
ID
I.D.
Rep: K180-14764RC
Chrome
KW7-14764LCID
Rep: K180-14764CP
Chrome
KW7-14764RCID
I.D.
Rep: K180-14764RC
Chrome
ID
90°
90°
90°
45°
6" ID
45°
45°
6" ID
6" ID
90°
45°
6" ID
Use these with any 6" or 7" OD (straight) Bottom Stack
41
KENWORTH REPLACEMENT PARTS
Early Aerocab with 1 muffler.
(This is mounted below the sleeper, between the frame rails)
FB-5ZN
FB-5ZN
or M-922
• High Flow
• Low Back Pressure
Note: Factory 5" elbows are expanded as shown.
42
KENWORTH REPLACEMENT PARTS
Aerocab layout 6" & 7"
KW6-18616RC
KW6-18615RC
KW7-18616RC
KW7-18615RC
(Need 2 brackets each side)
(Need 2 brackets each side)
or M-922
• High Flow
• Low Back Pressure
Note: 6" & 7" elbows are NOT expanded at the top.
43
KENWORTH REPLACEMENT PARTS
KW-18610-525
KW-18610-385
KW-17386-23
Replaces: K180-18610-525
Replaces: K180-18610-385
Replaces: K180-17386-23
90º
°
90º
°
KW-17386-24
KW-15350-1
KW-18613
Replaces: K180-17386-24
Replaces: K180-15350-1
Replaces: K180-18613
KW-18614
KW-1637-10
M-121L
Replaces: K180-18614
Replaces: K180-1637-10
Replaces: MOM12-0450-171
°
Specs on pg 78
KW-90561C
KW-ACUP
M-922
Replaces: K180-90561-CP
Replaces: Large Oval Muffler
Low backpressure
Good sound
Specs on pg 78
44
High Performance
Version!
KENWORTH REPLACEMENT PARTS
Early Aerocabs with 1 oval muffler underneath
KW-18615LC
5" ID
KW-18615RC
5" ID
KW6-18615LC
Replaces
K180-18615CP
Chrome
Replaces
K180-18615RCP
Chrome
6" reduced to 5" Left
Chrome
Fits 40" Battery Box
Fits 40" Battery Box
Fits 40" Battery Box
KW6-18615RC
6" OD
6" reduced to 5" Right
Chrome
Fits 40" Battery Box
KW-18616LC
5" ID
KW7-18615LC
7" OD
KW7-18615RC
7" reduced to 5" Left
Chrome
7" reduced to 5" Right
Chrome
Fits 40" Battery Box
Fits 40" Battery Box
KW-18616RC
5" ID
KW6-18616LC
Replaces
K180-18616CP
Chrome
Replaces
K180-18616RCP
Chrome
6" reduced to 5" Left
Chrome
Fits 45" Battery Box
Fits 45" Battery Box
Fits 45" Battery Box
KW6-18616RC
6" OD
KW7-18616LC
7" OD
KW7-18616RC
6" reduced to 5" Right
Chrome
7" reduced to 5" Left
Chrome
7" reduced to 5" Right
Chrome
Fits 45" Battery Box
Fits 45" Battery Box
Fits 45" Battery Box
6" OD
7" OD
6" OD
7" OD
45
KENWORTH REPLACEMENT PARTS
OE Replacement Parts
KW-1270LC
5" ID
KW-1270RC
5" ID
KW-1271LC
KW-1271RC
5" ID
Replaces:
M66-1270CP
Chrome
Replaces:
M66-1270RCP
Chrome
Replaces:
M66-1271CP
Chrome
Replaces:
M66-1271RCP
Chrome
Fits 40" Battery Box
Fits 40" Battery Box
Fits 45" Battery Box
Fits 45" Battery Box
KW6-1271LC
6" reduced to 5" Left
Chrome
Fits 45" Battery Box
6" OD
KW6-1271RC
6" reduced to 5" Right
Chrome
6" OD
Fits 45" Battery Box
KW7-1271LC
KW7-1271RC
7" OD
7" reduced to 5" Left
Chrome
7" reduced to 5" Right
Chrome
Fits 45" Battery Box
Fits 45" Battery Box
These are for newer Aerocabs with dual round catalyst/mufflers mounted underneath
TOP CAB MOUNT BRACKET
Polished Stainless Steel
AC-6KWLP
AC-6KWRP
AC-7KWLP
AC-7KWRP
6" Left
6" Right
7" Left
7" Right
LOWER FRAME MOUNTING
BRACKET Polished Stainless Steel
ACFM-5
ACFM-6
ACFM-7
(5")
(6")
(7")
2 required
per side
46
5" ID
7" OD
PETERBILT REPLACEMENT PARTS
Peterbilt 379 Daycab
PB-13042C
Replaces: 14-13042CP
to muffler
to muffler
PB-13042C
SF-518
PB-13042C
SF-518
PB-13978-0150
Replaces: 14-13978-0150
PB-13978-0150
Fits Daycab with mufflers tucked in behind cab
to muffler
PB-15501
Peterbilt 357 dual exhaust
w/ above frame exhaust
SF-518
to muffler
PB-13412
SF-518
PB-13940-0460
PB-15500Y
Peterbilt 357
single exhaust
PB-15501
Replaces: 14-15501
PB-15500Y
PB-13412
Replaces: 14-15500
Replaces: 14-13412
PB-13940-0460
Replaces: 14-13940-0460
47
PETERBILT
Peterbilt 379 single exhaust, right side
(Both of these are mounted to the cab in front of the sleeper.)
PB-13056
or
PB-13056C (Chrome)
PB-13002
or
PB-13430
SF-518
TO MUFFLER
SF-518
PB-12294-09
or
PB-12294-10
or
PB-12294-11
PB-13394
or
PB-13395
or
PB-09456
or
PB-13433
L590-1818A
Peterbilt 379 dual exhaust
Specs on page 66
Specs on page 77
48
PETERBILT REPLACEMENT PARTS
359 Conventional
PB-04055Y
PB-12308Y
PB-01726
Replaces: 14-04055
(Chrome #PB-04055YC)
Replaces: 14-12308
Extended Hood
Replaces: 14-01726
67°
45°
45°
PB-01726C (Chrome)
PB6-01726C (Chrome)
PB7-01726C (Chrome)
Replaces: 14-01726C
(6" version)
(7" version)
67°
67°
67°
5" O.D.
5" O.D.
PB6-01726WORC
PBF-618
Use these together to go 6"
from the Y pipe to the stack
18”
5" ID
PB7-01726WORC
PBF-718
Use these together to go 7"
from the Y pipe to the stack
18”
5" ID
49
PETERBILT REPLACEMENT PARTS
379 Conventional
PB-13002
PB-13430
PB-13394
Replaces: 14-13002
PB-13002C (Chrome)
Replaces: 14-13430
Replaces: 14-13394-202
PB-13394C (Chrome)
85°
90°
Flattened
PB-13395
PB-15073
PB-13433
Replaces: 14-13395
Replaces: 14-15073
Replaces: 14-13433
°
90°
Flattened
PB-09456
Replaces: 14-09456
PB-12294-09
PB-12294-10
Replaces: 14-12294-0975
Replaces: 14-12294-1075
90°
42.32"
38.38"
PB-12294-11
PB-13055Y
PB-15353Y
PB-13056
Replaces: 14-12294-1175
Replaces: 14-13055
(Chrome # PB-13055YC)
Replaces:
14-15353-0150z
and14-13944-0150
Replaces: 14-13056
5" ID
5" OD
5"
.2
46
Unibilt Y pipe 1994 & newer
50
55°
PETERBILT REPLACEMENT
PETERBILT
PARTS
PARTS
PETERBILTREPLACEMENT
REPLACEMENT
PARTS
379 Conventional
PB-13056C (Chrome)
PB6-13056C
PB7-13056C
Replaces: 14-13056CP
(6" chrome version)
(7" chrome version)
55°
55°
55°
5" O.D.
5" O.D.
PB6-13056WORC
PB6-13055Y
6" ypipe, available with 5" or 6" inlet
non stock, made to order. Call for leadtime.
PBF-618
Use these together to go 6"
from the Y pipe to the stack
18”
5" ID
PB7-13056WORC
PB7-13055Y
7" ypipe, available with 5" or 6" inlet
non stock, made to order. Call for leadtime.
PBF-718
Use these together to go 7"
from the Y pipe to the stack
18”
5" ID
51
PETERBILT REPLACEMENT
PARTS
PETERBILT REPLACEMENT
PARTS
STACK MOUNTING
BRACKETS
UNIBILT STACK MOUNTING
BRACKETS
OFFSET STACK
MOUNTING BRACKETS
(Polished Stainless Steel)
(Polished Stainless Steel)
(Polished Stainless Steel)
Dia.
Stainless Steel
Part No.
Dia.
Stainless Steel
Part No.
Dia.
Stainless Steel
Part No.
5"
6"
7"
MB-5PBS
MB-6PBS
MB-7PBS
5"
6"
7"
UB-5PBS
UB-6PBS
UB-7PBS
5"
6"
7"
OS-5PBS
OS-6PBS
OS-7PBS
MOUNTING RECOMMENDATIONS
Fits ’93 & older 379 &
359 conventionals.
• ’94 & ’95, simply bolt on our “UB” brackets
PB-12998S
PB-14186S
(Polished Stainless Steel)
1993 & older 379
Replaces 14-14792
"Horseshoe" style
cab Bracket
(Polished Stainless Steel)
1994 + 379 & 377
Replaces 14-14792
"Horseshoe" style
cab Bracket
PB-14656U
(2PC Grommet)
Replaces: 14-14656
Use 2 of these 2pc
Grommets along with
any of the mounting
brackets listed above
and use with
PB-12998S or
PB-14186S
shown at left
Polyurathane Not Rubber OE
52
PETERBILT 359 & 379 RETRO KIT
Get the old "Retro" look out of your newer modern truck.
Direct bolt on, No Cutting or Drilling! Large Radius Chrome
90° elbows follow the radius of the fuel tanks.
to stack
to stack
OR
Frame Hanger Clamps
Dia.
Complete Kit
Part #
6"
PRK-6
7"
PRK-7
Kit comes complete with chrome
elbows, Y, Flex, Clamps and
Frame Brackets.
* The top of the elbows will be 5" above the lower cab bracket.
Please confirm stack length.
53
PETERBILT RETRO KIT REPLACEMENT PARTS
PRKY-13944
PRK-BRKT
Y-Pipe
5" OD
PRK-L690C
PRKF-616
6"
5" ID
6" ID
PRKF-716
PRK-L790C
7"
5" ID
54
7" ID
PETERBILT REPLACEMENT
PARTS
PETERBILT REPLACEMENT
PARTS
377 & 378 Conventional
PB-13055Y
PB-15353Y
PB-13059LC
Replaces: 14-13055
Replaces: 14-13944-0150, 14-15353-0150
Replaces: 14-13059CP
Chrome
For Unibilt Models 1994 & newer
PB-13059RC
Replaces: 14-13059RCP
Chrome
PB6-13059RC
PB6-13059LC
(6" chrome version)
(6" chrome version)
5"
O.D.
5"
O.D.
PB-11380LC
PB-11380RC
PB6-11380LC
Replaces: 14-11380CP
Chrome
Replaces: 14-11380RCP
Chrome
(6" version)
5"
O.D.
PB6-11380RC
PB-15502
(6" version)
Replaces: 14-15502
For 378 Model
5"
O.D.
55
MACK
Mack R & RD Model Layout
or MK-4891M
Mack CH&CL Daycab Model
Replacement Layout
MK-597M
or
Mack CH&CL Sleeper Model
Replacement Layout
MK-597M
or
56
MACK
Mack DM Model Replacement Layout
or MK-4891M
Mack MR Model Replacement Layout
M-127
MK-22013
MK-2786
or
SF-412
MK-33038
OR
MK-33119
57
MACK REPLACEMENT
MACKPARTS
REPLACEMENT PARTS
R & RD Model
MK-21698
MK-4891A
MK-2786
Replaces: 4ME-21698
Replaces: 4ME-4891A
5" reduced to 4"
Replaces: 4ME-2786P3
MK-33092
MK-32612
MK-4762
Replaces: 4ME-33092
(Also replaces: 4ME-32603)
Replaces: 4ME-32612
Replaces: 4ME-4762
MK-4911
MK-4658
Replaces: 4ME-4911
Replaces: 4ME-4658
CH & CL Model
MK-4946
MK-4845
MK-597M
Replaces: 4ME-4946AM2
Replaces: 4ME-4845AM
Replaces: 4ME-597M
FLATTENED
58
FLATTENED
SMALL DEPRESSION
MACK REPLACEMENT PARTS
CH & CL Model
MK-538M2C
MK-538M
MK-583M
Replaces: 4ME-538M2C
(Chrome)
Replaces: 4ME-538M
Replaces: 4ME-583M
85
85°
85°
MK-583M2C
MK-4991M
MK-4993M
Replaces: 4ME-583M2C
(Chrome)
Replaces: 4ME-4991M
Replaces: 4ME-4993M
MK-4959M
MK-4947M
Replaces: 4ME-4959M
MK-22022M
Replaces: 4ME-4947M
Replaces: 4ME-22022M
85
°
°
MK-4947C (Chrome)
DM Model
MK-31942
MK-21408
MK-21598
Replaces: 4ME-31942P1
Replaces: 4ME-21408
Replaces: 4ME-21598
59
MACK REPLACEMENT
MACKPARTS
REPLACEMENT PARTS
DM Model (continued)
MK-21698
MK-33092
MK-2786
Replaces: 4ME-21698
Replaces: 4ME-33092
(Also replaces: 4ME-32603)
Replaces: 4ME-2786P3
MK-33038
MK-33119
MK-21783P2
Replaces: 4ME-33038
Replaces: 4ME-33119
Heavy Duty
Version of
MK-33038
Replaces: 4ME-21783P2
MK-21783P4
MK-21781
MK-22013
MR Model
Replaces: 4ME-21783P4
MK-2786
Replaces: 4ME-2786P3
60
Replaces: 4ME-21781
Replaces: 4ME-22013
INTERNATIONAL
International 8100 Daycab Exhaust Layout
Fits: L10, M11, 3176 and 11.1
International 8200 Daycab Exhaust Layout
Fits: N14, 3406 or 12.7
QPM-1051
or
M-130
or
M-465
61
INTERNATIONAL REPLACEMENT PARTS
8100 & 8200 Model
IH-7978C2
IH-3833C1
Replaces: 2017978C2
Replaces: 1673833C1
IH-5758C2
Replaces: 1675758C2
°
85
5"
4"
4"
For L10 or M11, 3176,11.1
IH-3450C3
IH-0190C2
Replaces: 1613450C3
Replaces: 2040190C2
Pro Sleeper
Muffler Inlet Pipe
5"
5"
FLATTENED
For N14, 3406 or 12.7
62
FLATTENED
INTERNATIONAL
International 9670 Exhaust Layout
QPM-1051
or
M-130
or
M-465
IH-167C1
IH-845C1
SF-518
International 9700 Exhaust Layout
QPM-1051
or
M-130
or
M-465
IH-059C1
IH-101C1 (fits 226 cm cab)
or
IH-118C1 (fits 280 cm cab)
SF-518
63
INTERNATIONAL REPLACEMENT PARTS
9670, 9700 & 9300 Models
IH-167C1
IH-845C1
IH-059C1
Replaces: 582167C1
Replaces: 503845C1
Replaces: 1674059C1
Standard turbo pipe 9670
Standard 9670 muffler inlet pipe
9700 226CM & 280CM cab turbo pipe
IH-101C1
IH-118C1
IH-286C1
Replaces: 1657101C1
Replaces: 1657118C1
Replaces: 598286C1
4" OD
9700 226CM cab muffler inlet pipe
4" OD
9700 280CM cab muffler inlet pipe
5" ID
IH-275-C1
IH-275-5C
IH-275-6C
Replaces: 598275-C1
90˚
90°
90˚
4"
O.D.
Chrome 4" for standard dual exhaust
5" chrome reduced to 4" for dual exhaust
IH-281C1
Replaces: 598281C1
4"
Goes from Y Pipe to Drivers Elbow
on 9300 type
64
4"
O.D.
6" chrome reduced to 4" for dual exhaust
FORD
Ford L Model with 5.9L Cummins
M-131
M-514
or
M-130-4
FT-212F
F3HZ-5246K
SF-412
Ford L Model with Ford 6.6 or 7.8L Engine
M-131
M-514
or
M-130-4
FT-212F
FT-5246K
FT-5246B
SF-412
65
FORD
Ford L, LN, LT, LNT & LTS
Exhaust Layout
This is 5" for most Cat
& Cummins applications.
QPM-1051
or
M-130
or
M-465
FT-212B (LN & LNT)
or
FT-212C (L, LT & LTS)
FT-5246M
SF-512
Ford L Model with L10 or 8.3L Cummins
FT-5246X
FT-5246V
M-131
M-514
M-130-4
FT-212F
SF-412
This is for an L10 application,
over frame pipes will fit other engine applications.
F3HZ-5246M
to SF-412
For 8.3L Cummins
66
FORD REPLACEMENT PARTS
FT-5246M
FT-212C
FT-212B
Replaces: EOHZ-5246M
Replaces: F2HZ-5A212C
Replaces: F2HZ-5A212B
80-91 Cummins turbo pipe
5" over frame pipe
L,LT & LTS muffler inlet pipe
5" over frame pipe
LN & LNT muffler inlet pipe
FT-LTL-RC
FT-LTL-LC
FT-5246X
Right side
Left side
Replaces: E8HZ-5246X
Replaces several pipe
numbers on LTL 9000 models
(use I.D. bottom stacks)
Replaces several pipe
numbers on LTL 9000 models
(use I.D. bottom stacks)
Popular L10
turbo pipe
most L models
FT-5246V
FT-212F
Replaces: E8HZ-5246V
Replaces: E2HZ-5A212F
Popular L10
intermediate pipe
most L models
Most popular 4" over frame pipe
F3HZ-5246M
Replaces: F3HZ-5246M
8.3L Cummins turbo pipe
6.6/7.8L Ford Diesel
FT-5246K
Replaces: E7HZ-5246K
turbo pipe
FT-5246B
Replaces: E7HZ-5246B
Middle pipe crosses over from driver’s
side to passenger side
F3HZ5246K
Replaces: F3HZ5246K
5.9 Cummins
turbo pipe
67
STERLING REPLACEMENT PARTS
QPM-1051
or
M-130
or
M-465
SF-518
FT-212BA
FT-212BA
ST-19210-000
Replaces: F6HZ-5A212BA
or 04-19750-000
Replaces: 04-19210-000
ST-19734-000
or
ST-19210-000
5" OD
ST-19752-000
Replaces: 04-19752-000
ST-19732-000
Replaces: 04-19732-000
4" OD
4" OD
68
ST-19734-000
Replaces: 04-19734-000
WESTERN STAR REPLACEMENT PARTS
to muffler
Heritage Model
WS-3520
SF-518
WS-3525
WS-3438
or
WS-3444
(Air ride cab)
WS-3440 (Chrome)
or
WS6-3440C
(6" chrome reduced to 5")
WS-3520
MB-WS (Heritage Model)
Replaces: 23517-3520
5", 6" or 7" stack mounting bracket, bolt
to cab and order MB-5PBS, MB-6PBS
or MB-7PBS
Turbo pipe
WS-3444
WS-3525
WS-3438
Replaces: 23517-3525
Replaces: 23527-3438
Replaces: 23529-3444
Intermediate pipe
Y pipe
Y pipe, Air ride cab
WS-3440C
WS6-3440C
Replaces: 23527-3440
6" reduced to 5"
85°
85°
5"
ID
Chrome elbow
For dual exhaust, chrome
69
WESTERN STAR REPLACEMENT PARTS
to muffler
Constellation Model
WS-3478
SF-518
WS-3561
WS-3542
WS-3540C (5”)
or
WS6-3540C
(6” reduced to 5”)
WS-3478
WS-3561
WS-3542
Replaces: 23529-3478
Replaces: 23529-3561
Replaces: 23529-3542
Turbo pipe 3406E, C15 CAT
Intermediate pipe
Y pipe, Air ride cab
WS-3540C
WS6-3540C
Replaces: 23529-3540
6" reduced to 5"
Stack Cab Mounting Bret
Dia.
6
7
90°
5" ID
Chrome OE replacement
70
Stainless Steel Part#
MB-6WSS
MB-7WSS
VOLVO REPLACEMENT PARTS
VG-0258
VG-0261
VG-0262
Replaces: 23509-0258
Replaces: 23509-0261
Replaces: 23509-0262
Right side muffler inlet pipe
most sleeper models
Aluminized
Left side muffler pipe
Dual exhaust
Aluminized
Right side muffler pipe
Dual exhaust
Aluminized
VG-9180
VG-9181C
VG-3286
Replaces: 20489180
Replaces: 20489181
Replaces: 23509-3286
71
FREIGHTLINER REPLACEMENT PARTS
Classic Model
This is mounted to the cab in front of the sleeper
FL-16460-009
FL-19105-014
or
to muffler
to muffler
72
FREIGHTLINER REPLACEMENT PARTS
Classic Model
FL-19297-001
FL-16460-009
FL-19105-014
Replaces: A04-19297-001
Replaces: 04-16460-009
Replaces: 04-19105-014
FL-16639-001
FL-16885-041
FL-16621-001
Replaces: 04-16639-001
Replaces: 04-16885-041
Replaces: 04-16621-001
FLATTENED
FLATTENED
FL-09657-013C
FL6-09657-013
Replaces: 04-09657-013
(chrome)
6" chrome version
5" OD
6" OD
Cab Mounting
Brackets
Dia.
Stainless Steel
Part No.
5
ACFM-5
6
ACFM-6
7
ACFM-7
Bolts onto 5" muffler clamp bolt centers
73
FREIGHTLINER REPLACEMENT PARTS
Century Class
QPM-1051
or
M-130
or
M-465
FL-17131-009
SF-524
SF-518
FL-17123-024
FL-17476-000
or
FL-17476-001
FL-17123-024
FL-17131-009
Replaces: 04-17123-024
Replaces: 04-17131-009
Fits the largest sleeper.
Trim to shorter lengths.
FL-17476-000 (Aluminized)
FL-17476-001 (Chrome)
Replaces: A04-17476-000
Replaces: A04-17476-001
74
FREIGHTLINER REPLACEMENT PARTS
Various Models
FL-12099-01C
Replaces: 04-12099-001
FL-6100C
FL-13974
Replaces: 04-12099-001
Replaces: A04-13974-000
FL-13974C (chrome)
100˚
100˚
Older FLC 120 muffler inlet pipe, chrome
6" reduced to 5" stack inlet pipe, chrome
Early FLD and COE Y pipe
FL-17094-012
FL-17094-014
FL-17094-016
Replaces: 04-17094-012
Replaces: 04-17094-014
Replaces: 04-17094-016
FL-17094-020
11.5"
5"
O.D.
18"
11.5"
Replaces: 04-17094-020
5"
O.D.
11.5"
5"
O.D.
90°
18"
90°
16.5"
5.88"
O.D.
90°
5.88"
O.D.
90°
5.88"
O.D.
9"
FLD turbo pipe
90°
90°
10.75"
11.75"
FLD turbo pipe
FLD turbo pipe
FL-12104
FL-15654-0
FL-15653-0
Replaces: A04-12104-000
Replaces: 04-15654-000
Aluminized
Replaces:
04-15653-000
FL-15653-0IC
Older FLC 120 Y pipe
OD/OD
FL-15077-0
Chrome
Replaces:
04-15653-001
FL-15077-3
FL-15105-000
Replaces: 04-15077-003
Replaces: 04-15105-000
FL-07094-013
FL-17094-015
FL-17094-030
Replaces: 04-17094-013
Replaces: 04-17094-015
Replaces: 04-17094-030
Replaces: 04-15077-000
75
CUSTOM MUFFLERS
We can either modify existing mufflers or build them from scratch.
We need to know the following:
Quantity _________________________
Type (see samples) _______________
Engine Type & Size ________________
Body Diameter
Available
6"
7"
A Inlet Diameter I.D. or O.D. _________
8.5"
B Outlet Diameter I.D. or O.D. ________
9"
C Body Diameter __________________
10"
D Body Length____________________
11"
E Overall Length __________________
12
Location of Inlet/Clock Position _______
16
Location of Outlet/Clock Position _____
G Measurement___________________
8" x 11"
10" x 15"
Type 1
12
9
1
3
Type 2
Type 3
6
NOTE: All clock
positions viewed
from inlet end
of muffler.
12
Type 4
9
1
3
6
Type 6
Type 7
All Custom Muffler Sales are Final with no returns.
The manufacturing and shipping process is generally 10-14 days.
A picture is worth a thousand words. Please fax us your specs.
76
RESONATORS
Use with regular mufflers for further sound reduction
E
D
C
A
B
G
TYPE 1 Resonators
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia
ID
C
Body
Dia.
D
Body
Length
E
Overall
Length
1
1
1
M-150
M-144
M145
3.5
4
5
3.5
4
5
9
9
9
14
10
10
19.75
16.5
16.5
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
-
-
Fits
-
MUFFLERS
See Page 6 for Quiet Performance Mufflers
E
D
C
A
B
G
TYPE 1 End In/End Out Centered
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia
C
Body
Dia.
D
Body
Length
E
Overall
Length
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
M-187
M-188
M-127
M-630
M-824
M-131
M-514
M130-4
M-444
M-595
M-465
M-130
M-132
M-533✩✩
M-557✩
M-136
M-533-0
M-557-0
M-651
QPM-1051
QPM-851
3"
3.5"
4"
4"
4"
4"
4"
4"
4"
5"
5"
5"
5"
5"
5"
5"
5"
5"
6"
5"
5"
3"
3.5"
4"
4"
4"
4"
5"
5"
4"
5"
5"
5"
5"
5"OD
5"OD
5"
5"OD
5"OD
6"
5"
5"
6.1"
7.1"
8-1/2"
6"
8"
9"
9"
10"
10"
9"
10"
10"
9"
9"
9"
10"
9"
9"
10"
10"
8"
21"
30"
34.5"
24"
15"
44.5"
44.5"
44.5"
44.5"
20"
44.5"
44.5"
44.5"
25"
34"
36"
25"
34"
44.5"
44.5"
40"
30"
38"
41"
30"
21.5"
51"
51"
51"
51"
26.5"
51"
51"
51"
33"
40.5"
41.6"
33"
40.5"
51"
51"
51"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Fits
Mack R Model
Mack & Navistar
Economy
Better Quality
Pete 379 Standard Hood
Pete 379 Extended Hood
Great for Dump Trucks
Less Restrictive for High HP Engines
Less Restrictive for High HP Engines
Fuel Saver
Fuel Saver
✩✩ Fits 379 Peterbilt Standard Hood Horizontal Fit.
✩ Fits 379 Peterbilt Extended Hood Horizontal Fit.
Indicates our most popular part numbers.
77
MUFFLERS
9
E
12
12
3
D
9
3
6
A
6
F
C
G
B
TYPE 2 End In/End Out Offset Ends
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia.
ID
C
Body
Dia.
D
Body
Length
E
Overall
Length
2
2
2
2
2
2
2
2
2
M-139
M-106
M-512
M-153
M-529
M-147
M-117
M-4025
M-180
3"
3.5"
3.5"
4"
4"
5"
5"
5"
6"
3"
3.5"
4"
4"
4"
5"
5"
5"
6"
8.5"
8.3" x 11.5"
8.25" x 11.5"
8.25" x 11.5"
11.1"
10" x 15"
10" x 15"
11"
10" x 15"
31.2"
26"
27"
27"
36"
27"
36"
36"
32"
36.2"
32"
33"
33"
42.2"
33"
42"
41"
42.5"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
2"/12
3"/12
2.5"/12
2.5"/12
2.5"/12
3.3"/12
4"/12
2.5"/12
3.6"/12
2"/6
3"/6
2.5"/6
2.5"/6
2.5/6
3.3"/6
4"/6
2.5"/6
3.6"/6
NOTE: All clock positions viewed from inlet end of muffler.
Fits
IH
Ford
Ford
Type 3A
H
HIGH FLOW, LOW BACK PRESSURE
TYPE 3 & 3A End Out /End In Same End
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia.
ID
C
Body
Dia.
D
Body
Length
E
Overall
Length
3
3
M-121
M-121L
5"
5"
5"
5"
10" x 15"
10" x 15"
26"
44"
22"
3A
M-922
5"
5"
9"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
H
Ctr
to
Ctr
29"
48"
3"/12
3"/12
3"/6
3"/6
6"
6"
KW Aero Cab/IH
_
_
_
7.5"
KW Aero Cab/IH
Fits
NOTE: All clock positions viewed from inlet end of muffler.
E
12
9
3
6
D
12
9
3
C
B
F
6
A
TYPE 4 Side In/End Out
INLET
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia.
ID
C
Body
Dia.
D
Body
Length
E
Overall
Length
4
4
4
M-149
M-724
M-526
4"
4"
5"
3.8" O.D.
4"
5"
10" x 15"
11"
10"
16"
36"
44.5"
21"
39"
48.25"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
3.1"/12
4.3"/9
5.5"/6
4.4"/12
2.5"/12
—
Fits
Mack DM
GMC Brigadier & Astro
NOTE: All clock positions viewed from inlet end of muffler.
78
MUFFLERS
B
12
12
9
3
9
6
G
3
F
C
A
INLET
6
D
E
NOTE: All clock positions viewed from inlet end of muffler.
TYPE 6 End In/Side Out
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia.
ID
C
Body
Dia.
D
Body
Length
E
Overall
Length
6
6
6
6
6
M-537
M-511
M-530
M-503
M-672
3.5"
3.5"
4"
5"
5"
4"
4" O.D.
4"
5"
5"
8.3" x 11.5"
8.3" x 11.5"
11.1"
10" x 15"
11"
32"
32"
36"
36"
36"
35"
35"
39"
39"
39"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
2.5"/6
2.5"/6
1.5"/6
4.0"/12
2.7"/6
20"/3:30
20"/10:30
28.5"/12
28.5"/6
28.5"/12
Fits
IH DT466 Horizontal Outlet
IH DT466 Vertical Stock
Ford
Ford
Ford
B
G
C
F
A
B
D
E
TYPE 7 End In/Dual Side Out
Type
Part
No.
A
Inlet
Dia.
ID
B
Outlet
Dia.
OD
C
Body
Dia.
D
Body
Length
E
Overall
Length
7
M-599
5"
5/5
9"
30"
34"
F
G
Inlet
Offset/
Clock
Position
Outlet
Offset/
Clock
Position
center
22.5"/12&6
Fits
79
MUFFLERS
Chrome Mufflers
Inlet
Dia.
Outlet
Dia.
Chrome
Part No.
5"
5"
6"
5"
6"
6"
CM-55C
CM-56C
CM-66C
I.D.
Same length as standard muffler.
Good sound reduction
51"
Body is 6" diameter
• Smooth, seamless construction
• Internal core is louvered for
noise reduction
I.D.
Body
6" OD
MUFFLER ELIMINATORS
5" ID
Muffler Eliminators
Fit in place of standard mufflers
5" ID
80
Dia.
Length
Finish
Part #
5"
5"
51"
51"
Aluminized
Chrome
S5-51EXEXA
S5-51EXEXC
STACK AND MUFFLER MOUNTING BRACKETS
PETERBILT
PB-14656U
(2PC Grommet)
Use of 2 of these 2pc
Grommets along with
any of the Peterbilt
mounting brackets
listed and with
PB-12998S or
PB-14186S
Bolts directly onto factory cab brackets
Dia.
Polished
Stainless
Part No.
5"
6"
7"
MB-5PBS
MB-6PBS
MB-7PBS
Fits 359 & 379 models thru ’93
Bolts directly onto factory cab brackets
Dia.
Polished
Stainless
Part No.
5"
6"
7"
OS-5PBS
OS-6PBS
OS-7PBS
Polyurethane NOT Rubber
PB-12998S
(Polished Stainless Steel)
1993 & older 379
Replaces 14-14792
"Horseshoe" style
cab Bracket
May be used on unibilts or where
you want to move the stack 2"
PB-14186S
Dia.
Polished
Stainless
Part No.
5"
6"
7"
UB-5PBS
UB-6PBS
UB-7PBS
(Polished Stainless Steel)
1994 + 379 & 377
Replaces 14-14792
"Horseshoe" style
cab Bracket
'94 & '95 Unibilt
KENWORTH
Aerocab
W900 B
Bolts directly onto factory cab brackets
Dia.
Polished
Stainless
Part No.
5"
6"
7"
MB-5KWS
MB-6KWS
MB-7KWS
Dia.
6"
6"
7"
7"
Polished
Stainless
Part No.
AC-6KWLP
AC-6KWRP
AC-7KWLP
AC-7KWRP
(Left)
(Right)
(Left)
(Right)
Use factory 8mm bolt
for mounting
Aerocab
Dia.
Polished
Stainless
Part No.
5"
6"
7"
ACFM-5
ACFM-6
ACFM-7
Can replace standard 5" bolt type clamps.
81
STACK AND MUFFLER MOUNTING BRACKETS
WESTERN STAR
WESTERN STAR CONSTELLATION
WESTERN STAR 5", 6" & 7"
STACK MOUNT BRACKETS
HERITAGE MODEL
Dia.
6
7
Part No.
Stainless Steel Part #
MB-6WSS
MB-7WSS
MB-WS
Bolt to existing cab brackets & bolt
MB-5PBS, MB-6PBS or MB-7PBS
to it for a simple hassle free
installation.
UNIVERSAL
Freightliner / IH / Universal
Dia.
5"
6"
7"
Stack Mount Bracket
See Page 35 for 4", 5" or 6" FB style
clamps needed with these brackets.
Polished
Stainless
Part No.
ACFM-5
ACFM-6
ACFM-7
Plain
Part No.
Chrome
Part No.
SMB
SMBC
These can be used to replace standard 5" bolt type clamps.
Muffler Hanger
For use in horizontal applications
Fits
Muffler
Dimensions
8"
8.5"
9"
10"
11"
8.5" x 11"
10" x 15"
82
Zinc
Plated
Part No.
RMH-8
RMH-85
RMH-9
RMH-10
RMH-11
OMH-8511
OMH-1015
Hanger
For horizontal applications for use on
exhaust pipes or mufflers. Use 2 per
muffler. Clamps not included. See
page 35 for proper RB style clamps.
9.5"
Plain
Part No.
H-10
HEAT SHIELDS
Chrome Plated • Stainless Steel
ULTRA BRIGHT
No Rust, No Dulling or Tarnishing!
2 PC. MOUNTING BRACKETS
ARE INCLUDED WITH SHIELD KIT
Degree of
Wrap
around
180°
180°
180°
180°
Length
To Fit
Dia.
48"
48"
48"
48"
4"
5"
6"
7"
Chromed Stainless Steel Part # Ultra Bright Finish
Round
No
Vertical
Hole
Hole
Slot
Part #
Part #
Part #
PG-448NSCP
PG-548NSCP
PG-648NSCP
PG-748NSCP
PG-448RSCP
PG-548RSCP
PG-648RSCP
PG-748RSCP
PG-448VSCP
PG-548VSCP
PG-648VSCP
PG-748VSCP
Top View
180°
No
Hole
Indicates our most popular part numbers.
Round
Hole
Vertical
Slot
83
AERODYNAMIC HEAT SHIELDS
Polished stainless steel, 60" long to cover all clamps & mounting brackets
2PC mounting brackets are included
To Fit
Dia.
Length
5"
6"
7"
10"
60"
60"
60"
60"
TOP VIEW
84
No
Hole
Part #
Round
Hole
Part #
Vertical
Slot
Part #
Louvered
Part #
AHS-560NS
AHS-660NS
AHS-760NS
AHS-1060NS
AHS-560RS
AHS-660RS
AHS-760RS
AHS-1060RS
AHS-560VS
AHS-660VS
AHS-760VS
AHS-1060VS
AHS-560LV
AHS-660LV
AHS-760LV
AHS-1060LV
HEAT SHIELDS
2 PC. MOUNTING BRACKETS
ARE INCLUDED WITH SHIELD KIT
Stainless Steel Part # Bright Finish
Degree of
Wrap
around
Length
To Fit
Dia.
Aluminized
part #
Round Hole
No
Hole
Part #
Round
Hole
Part #
180°
180°
180°
180°
180°
180°
180°
180°
270°
270°
270°
270°
48"
48"
48"
48"
48"
48"
48"
48"
48"
48"
60"
60"
4"
5"
6"
7"
8"
8.5"
9"
10"
9"
10"
9"
10"
PG-448RA
PG-548RA
PG-648RA
PG-748RA
MG-848RA
MG-8548RA
MG-948RA
MG-1048RA
-
PG-448NS
PG-548NS
PG-648NS
PG-748NS
MG-848NS
MG-8548NS
MG-948NS
MG-1048NS
MG-9270NS
MG-10270NS
MG-960270NS
MG-1060270NS
PG-448RS
PG-548RS
PG-648RS
PG-748RS
MG-848RS
MG-8548RS
MG-948RS
MG-1048RS
MG-9270RS
MG-10270RS
MG-960270RS
MG-1060270RS
Top View
180°
No
Hole
Indicates our most popular part numbers.
Vertical
Slot
Part #
PG-448VS
PG-548VS
PG-648VS
PG-748VS
MG-848VS
MG-8548VS
MG-948VS
MG-1048VS
MG-9270VS
MG-10270VS
MG-960270VS
MG-1060270VS
Top View
270°
Round
Hole
Vertical
Slot
85
MOUNTING BRACKETS
180°, 270° & Aerodynamic Heat Shield Mounting Brackets
To Fit
Degree of
Heat Shield
180°
180°
180°
180°
180°
180°
180°
180°
270°
270°
Aero
Aero
Aero
Aero
180°
3 Standoffs
Top View
86
To Fit
Dia.
4"
5"
6"
7"
8"
8.5"
9"
10"
9"
10"
5"
6"
7"
10"
Zinc
Plated
Part No.
Chrome
Plated
Part No.
MG-8ZBRKT
MG-85ZBRKT
MG-9ZBRKT
MG-10ZBRKT
MG-9270BRKT
MG-10270BRKT
AHS-5BRKT
AHS-6BRKT
AHS-7BRKT
AHS-10BRKT
PG-4CBRKT
PG-5CBRKT
PG-6CBRKT
PG-7CBRKT
-
270°
4 Standoffs
Top View
Aerodynamic
3 standoffs & L Brackets
Top View
GRAB HANDLES
Bright 300 Series Stainless Steel, Bolts Onto Heat Sheilds
Length
18"
24"
Part No.
GH-18S
GH-24S
PIPE GRAB HANDLES
24" Long, All Polished Stainless Steel, Clamps onto Stack
Dia.
Part No.
5"
PGH5-24S
6"
PGH6-24S
7"
PGH7-24S
87
SCHOOL BUSES
School Bus Heater and Defroster Motors
F
E
D
A
Part#
C
Volts
D
Shaft
Dia.
B
Body
Dia
CW
CCW
12
12
1/4"
1/4"
3.0
3.0
2.50
2.50
REV
CW
CCW
REV
12
12
12
12
5/16"
5/16"
5-16"
5-16"
3.0
3.0
3.0
3.0
3.00
3.40
3.00
3.40
Rotation
B
A
C
Body Length
Shaft Length
without Bearing with Bearing
E
Front Stud
Length
F
Rear Stud
Length
No. of
Speeds
No. of
Wires
Vented
Housing
1.50
1.50
0.50
0.50
0.15
0.15
2
2
2
2
N
N
1.80
1.66
1.66
1.75
0.50
0.44
0.44
0.33
0.50
0.50
0.15
—
2
2
2
1
5
3
3
2
Y
Y
Y
Y
DEFROSTER
GR-037
GR-055
HEATER
GR-157
GR-314
GR-315
GR-798
88
POWERFLOW EXHAUST SYSTEMS
POWERFLOW
Performance Diesel Pickup Exhaust Systems
• BOLT-ON HORESPOWER, TORQUE, AND FUEL ECONOMY
You Can’t Afford NOT to Upgrade Your Exhaust
Their Clamp on left VS Ours on the right
• Bolt-On a reduction in
Exhaust Temperature
• Larger pipe diameters than OE
• Straight-Thru, unrestricted muffler
4”and 5” Turbo-Back
Single Systems - Aluminized
STANDARD SINGLE - OE EXIT LOCATION
• Kits fit all wheelbases
• Systems come complete in one box and can ship
UPS/FedEx Ground
• Polished 304 Stainless Slash-Cut Tip included
with systems
• Hangers are heavier 1/2” diameter and utilize
all OE locations
Part No.
Diameter
FORD
PS-9497-A4
PS-99-A4
PS-99-A5
PS-6.0-A4
PS-6.0-A4
FORD
4"
4"
5"
4"
5"
94-97 FORD 7.3 POWERSTROKE
99-02 FORD 7.3 POWERSTROKE
99-02 FORD 7.3 POWERSTROKE
03-05 FORD 6.0 POWERSTROKE
03-05 FORD 6.0 POWERSTROKE
DC-9402-A4
DC-9402-A5
DC-0304-A4
4"
5"
4"
DC-0304-A5
5"
DC-600-A4
4"
DC-600-A5
5"
94-02 DODGE 5.9 CUMMINS
94-02 DODGE 5.9 CUMMINS
03-04½ DODGE 5.9 CUMMINS
WITH 235 - 305 HP
03-04½ DODGE 5.9 CUMMINS
WITH 235 - 305 HP
04½-06 WITH 325 HP OR
600 SERIES HIGH OUTPUT
04½-06 WITH 325 HP OR
600 SERIES HIGH OUTPUT
DODGE
DODGE
• Pyrometer fitting in turbo pipe
• 5" system is 4" to muffler, 5" after
NOTE: It is illegal to remove catalytic converters
on vehicles so equipped. Consult a professional
to determine options.
Application
GM
GM-0004-A4
GM
4"
00-04 GM 6.6 DURAMX
NOT FOR LBZ ENGINE
89
STACK KITS
• Gives Diesel Pickups that “Big Rig” look!
• Great flow—improved performance.
• Functional—Routes exhaust fumes above and away from livestock,
car haulers, and cargo where diesel smoke is unwanted
• Select many different exhaust stack styles and lengths to use with
this system (stacks not included with kits)
Stack brackets included
(Stack Not included)
Part #
(Stack Not included)
Diameter
Inlet
of Stack Diameter
DPU-4SK
DPU-5SK
DPU-6SK
DPU-7SK
4"
5"
6"
7"
4"
4"
4"
4"
DPU-5SK-5I
DPU-6SK-5I
DPU-7SK-5I
5"
6"
7"
5"
5"
5"
4" ID
NOTE: on ALL Stack Kits that
are 6"or 7", order SK, SP or SBH
stacks. These are reduced to 5"
OD at the bottom.
12"
Premium 304
Stainless Flex
• Kit includes 2 bright stainless unistrap clamps to secure stacks
• Quality AccuSeal heavy gauge band clamps included in kits
™
Everything included except chrome stacks. Down Pipes, Muffler and Intermediate Pipe not included with these kits.
90
STACK KITS
• Gives Diesel Pickups that “Big Rig” look!
• Great flow—improved performance.
• Functional—Routes exhaust fumes above and away from livestock,
car haulers, and cargo where diesel smoke is unwanted
• Select many different exhaust stack styles and lengths to use with
this system (stacks not included with kits)
Stack brackets included
(Stack Not included)
Part #
SPU-4SK
SPU-5SK
SPU-6SK
SPU-7SK
Inlet
Diameter
of Stack Diameter
4"
5"
6"
7"
4"
5"
5"
5"
NOTE: on ALL Stack Kits that are 6"or 7",
order SK, SP or SBH stacks. These are
reduced to 5" OD at the bottom.
4" ID
12"
Premium 304
Stainless Flex
• Kit includes bright stainless unistrap clamp to secure stack
• Quality AccuSeal heavy gauge band clamps included in kits
™
Everything included except chrome stacks. Down Pipes, Muffler and Intermediate Pipe not included with these kits.
91
STACK KITS
Stack brackets included
(Stack Not included)
Complete Turbo To Stack Kits. Aluminized
Part No.
Diameter
FORD
PS-9497-4SK
PS-9497-5SK
PS-9497-6SK
PS-9497-7SK
PS-9902-4SK
PS-9902-5SK
PS-9902-6SK
PS-9902-7SK
PS-6.0-4SK
PS-6.0-5SK
PS-6.0-6SK
PS-6.0-7SK
Application
FORD
4"
5"
6"
7"
4"
5"
6"
7"
4"
5"
6"
7"
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
4"
5"
6"
7"
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
DC-9402-4SK
DC-9402-5SK
DC-9402-6SK
DC-9402-7SK
DC-0304-4SK
DC-0304-5SK
DC-0304-6SK
DC-0304-7SK
DC-600-4SK
4"
5"
6"
7"
4"
5"
6"
7"
4"
DC-600-5SK
5"
DC-600-6SK
6"
DC-600-7SK
7"
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
04½-06 5.9L CUMMINS 600 SERIES
325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
325HP OR 600 SERIES HIGH OUTPUT
GM
GM-0004-4SK
GM-0004-5SK
GM-0004-6SK
GM-0004-7SK
GM
DODGE
92
DODGE
(Stack Not included)
STACK KITS
(Stack Not included)
Complete Turbo To Stack Kits. Aluminized
Part No.
Diameter
FORD
PS-9497-S4SK
PS-9497-S5SK
PS-9497-S6SK
PS-9497-S7SK
PS-9902-S4SK
PS-9902-S5SK
PS-9902-S6SK
PS-9902-S7SK
PS-6.0-S4SK
PS-6.0-S5SK
PS-6.0-S6SK
PS-6.0-S7SK
Application
FORD
4"
5"
6"
7"
4"
5"
6"
7"
4"
5"
6"
7"
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
94-97 FORD POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
99-02 FORD 7.3L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
03-05 FORD 6.0L POWERSTROKE
4"
5"
6"
7"
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
00-04 GM 6.6L DURAMAX NO LBZ ENGINE
DC-9402-S4SK
DC-9402-S5SK
DC-9402-S6SK
DC-9402-S7SK
DC-0304-S4SK
DC-0304-S5SK
DC-0304-S6SK
DC-0304-S7SK
DC-600-S4SK
4"
5"
6"
7"
4"
5"
6"
7"
4"
DC-600-S5SK
5"
DC-600-S6SK
6"
DC-600-S7SK
7"
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
94-02 5.9L CUMMINS
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
03-04½ 5.9L CUMMINS W/235-305HP
04½-06 5.9L CUMMINS 600 SERIES
W/325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
W/325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
W/325HP OR 600 SERIES HIGH OUTPUT
04½-06 5.9L CUMMINS 600 SERIES
W/325HP OR 600 SERIES HIGH OUTPUT
GM
GM-0004-S4SK
GM-0004-S5SK
GM-0004-S6SK
GM-0004-S7SK
GM
DODGE
DODGE
93
CUSTOM TUBE FABRICATION
Tube
Diameter
Length
3
3.5
4
5
5
6
6
7
3.5
5
4.5
5.5
7.5
7.0
10.0
8.0
End Forming & Fabrication
Deburring
Sizing
Reducing
Tapping
Chamfering Beading Flaring
Expanding Slotting Swaging
Welding Drilling
Beading
Machining
See page 19, 29 & 76 for easy to use charts.
Send us a drawing of sample part.
Distributed by:

Similar documents

Chrome Depot Inc

Chrome Depot Inc ID *Swedged. No welds.

More information

medium duty trucks international - Grand Rock Truck Exhaust Systems

medium duty trucks international - Grand Rock Truck Exhaust Systems 1562SC w/T444E Diesel, R.H. Mounted Muffler, Long Tail Pipe, (Exc. 140" W.B.), w/o Air Suspension, Code 07AAX SB5-4134BB

More information