GRINDING - Hercules MMS

FUNDY
GRINDING
Machining & Millwright Services
FUNDY
GRINDING
Machining & Millwright Services
39 years of experience
working in the
Machining Industry
Since 1975, Fundy Grinding has been providing
customers with Machining and Millwright
services. Over this time, the company has grown
from providing these services locally to working
across Canada and around the world.
Fundy has the equipment and the expertise to
get the job done for you. All of our equipment
is maintained, inspected and can be customized
to match our customer’s requirements. We have
the ability to bring our shop to yours. From
boring a small hole in a boom truck to complete
maintenance shutdowns we are able to assist
customers with their maintenance requirements.
Fundy is ISO certified to ensure we can match
our customer’s expectations of doing a quality
job every time. This commitment is made to our
customers, whether the job is being done in our
machine shop or being completed onsite.
Let Fundy’s experience help you achieve your
goal of less downtime.
www.fundygrinding.ca
MACHINE SHOP SERVICES
We offer pump repairs for the following types of pumps:
•
•
•
•
•
•
•
•
•
Reciprocating pumps
Multi stage deep well pumps
Milton Roy metering pumps
Portable hydraulic pumps
Multi stage boiler feed pumps
Fire pumps
Johnson vertical pumps
Gardener Duplex steam pumps
Dredge hydraulic pumps
www.fundygrinding.ca
General machine shop repairs:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Electric motor end bell bearing fit repairs
Refurbishing bearing bores in large gearboxes
Electric motor rotor replacement and repair
Rubber roller grinding
Teflon shrink sleeve installation
Roller manufacturing (steel and aluminum)
Surface grinding
Key way cutting
Spline cutting (straight sided and involute tooth cutting)
Custom design mixing screw assembly
Manufacture using stainless and carbon steel
2D custom injection mould manufacturing
Crusher shaft manufacturing and repair
Babbit bearing reconditioning
Stainless steel boat shaft repair and manufacturing
Spray weld repairs on shaft seal fits
BORTECH
WELDING
www.fundygrinding.ca
INSITU SERVICES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Flange resurfacing 5”diameter to 60” diameter
Pipe weld preps 5” to 60”
Pipe cut out and weld bevel 6” to 18” diameter
Motor base and sole plate milling
Stud and bolt removal (including large diameter studs)
Onsite drilling and tapping. (holes up to 4” dia.)
Line boring services ( 1.5” diameter and up)
Large diameter boring (up to 60”diameter )
Larger boring can be done on a per job request ex. pump/turbine casings,
blower housing, etc
Slip ring machining
In place shaft machining and repair
In place shaft keyway milling
Bore honing services
Shaft coupling bolt hole boring
SLIP RING MACHINING
www.fundygrinding.ca
ONSITE MACHINING SERVICES
•
•
•
•
•
•
•
We can provide onsite machining supervision
Ability to work 24 hour shifts
Full document control with Inspection records sheets, time sheet control
Ability to provide costing updates as per customer requirements, daily
or weekly
Can work as a stand alone team or part of an integrated plant
maintenance team
Full safety documentation available for job site use
Complete machine shop facility to assist onsite machining preparation
for mobilization and support during outages
PORTABLE MACHINE SHOP
Our complete portable machine shop can be placed within your facility to
support your shutdown or outage.
Our shop in a box can be customized to include:
•
Rigging and other lifting provisions
•
Standard steel stock
•
Millwright hand tooling
•
Additional machine equipment as needed
•
Portable shop can be customized to customer’s requirements
SHOP IN A BOX
www.fundygrinding.ca
MILLWRIGHT SERVICES
•
•
•
•
•
•
•
•
•
•
•
•
39 years experience working in the Power Generation Industry
Can provide complete millwright crews for power plant shutdowns
Dedicated turbine specialist crews can be provided for turbine repairs
We can provide millwright supervision
Ability to work 24 hour shifts
Full document control with inspection records sheets, timesheet control
Ability to provide costing updates as per customer requirements, daily or
weekly
Can work as a stand alone team or part of an integrated plant
maintenance team
Full safety documentation available for job site use
Proud partner of the Millwright Local 1178
Complete machine shop facility to assist onsite machining preparation for
mobilization and support during outages
Millwright support for turbine installations or repairs
We have completed repairs on turbines such as:
•
•
•
•
•
•
•
•
•
•
Complete strip down and rebuilds on turbines and generators
Alignment of turbine and generator
Machining and replacing of valve studs
Valve and relay overhauls
Lifting of cylinders, cross over pipes, spindles, and rotor in and out of
turbine
Bearing inspections and replacements
Hydrogen seal inspections and replacements
Alignment of pumps and commissioning
Boiler feed pump repairs
Force draft fan repairs
www.fundygrinding.ca
CNC MILLING
FLANGE FACING
LINE BORING BOILER
FEED PUMP
PORTABLE MILLING
PUMP BASE
PORTABLE MILLING DOVE TAIL
www.fundygrinding.ca
FUNDY
GRINDING
Machining & Millwright Services
Fundy Grinding is part of the
Hercules Group of Companies, a
national organization based in
Dartmouth, Nova Scotia. We support
the success of a wide range of
sectors across Canada, including the
energy, oil & gas, manufacturing,
construction, mining, and marine
industries.
GROUP OF COMPANIES
www.fundygrinding.ca
www.fundygrinding.ca
www.fundygrinding.ca
FUNDY
GRINDING
Machining & Millwright Services
144 Crossley Ave.
Truro, NS B2N 6T7
Tel: 902-895-6911
Fax: 902-893-6911