acoustical ceiling products

ACOUSTICAL CEILING PRODUCTS
PRISMATIC LENSES - WRAP AROUND LENSES - OUTDOOR REPLACEMENT
LENSES PARABOLIC LOUVERS - DECORATIVE LOUVERS
EGGCRATE LOUVERS - ALUMINUM EGGCRATE - ALUMINUM LOUVERS
Products for Today’s Office and Retail Environment
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
SLP LIGHTING WEST
16423 BERWYN ROAD
CERRITOS, CA 90703 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
PHONE: 562.404.1440
FAX: 562.404.4711
V04062015
Build. Excellence. Within.
Ceilings & Interior Systems
Construction Association
Build. Excellence. Within.
Wraparound Lenses
Lenses
•
•
•
Injection Molded Wrap Around Lenses
Endcaps, Springs and Clips
A wide selection of replacement wraparound lenses
Translucent Acrylic:
• Frosted White or Matte Clear
• Thickness: .040” or .080”
• Standard sizes up to 2’x4’
Cracked Ice:
• Styrene
• Frosted White or Clear
• Thickness: .065”, .070” or .125”
• Standard sizes up to 50’x100’
Prismatic Pattern 12:
Industry standard 3/16” female prismatic
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene
• Standard sizes up to 50”x100”
Prismatic Pattern 15:
Bold 3/8” female prism of Pattern 15 offers reduced
glare and an upgraded appearance.
• Thickness: .200”
• Standard sizes up to 4’x4’
Prismatic Pattern 19:
3/16” male prism of Pattern 19 offers the
lowest glare of the prismatic lenses.
• Thickness: .156”
• Standard sizes up to 4’x4’
Outdoor Replacement
Components
Injection Molded Drop Lens:
• 12” x 12” DL-A-1212 OR DL-PC-1212
• 20” x 20” DL-A-2020
Our precision injection molded drop lenses
provide maximum controlled illumination.
They have an asymmetrical light distribution
designed specifically for service station and
parking lot applications.
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White or
Linear Prism
Eggcrate Louvers
Retrofit Kits
Retrofit Kits assemblies are designed to be installed between an existing
lighting fixture and the inverted tee bar ceiling system.
RFK3™
Retrofit any existing lay-in fixture into a deep cell
parabolic aluminum louver.
T Series:
1/2” x 1/2” x 1/2”
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
2’x4’: 12, 18 or 32 cell
2’x2’: 9 or 16 cell
Finish: Semi-Specular or White
RFK2™
Retrofit any existing lay-in fixture (including 3”
deep aluminum) with a standard white steel door
frame. 1/2” Frame will accept any lens, louver or
eggcrate.
TC Economy Grade:
1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
2’x4’, 2’x2’ and 1’x4’
Aluminum Eggcrate
ANY Lay-in Light Fixture that has an existing
Lens, Louver, or Eggcrate installed.
AT: 1/2” cube aluminum
1. Remove and discard existing door frame.
2. Ensure that there is clearance in plenum area, then lift up the existing fixture.
(Clearance Required: 1” for RFK2, 2-1/4” for RFK3)
3. Install outer frame into T-bar and place the existing fixture on top of outer frame.
4. Install the RFK2 or RFK3 into the outer frame and latch closed.
Before:
After:
AT1: 1” cube aluminum
.50”
12,7mm
.50”
12,7mm
1”
25,4mm
Finishes: baked white enamel, mill finish, clear anodized or black enamel.1”
25,4mm
Custom sizes available.
Parabolic Louvers
All SLP Parabolic Louvers are available:
Style 1
Style 4 and 5
Parabolic Aluminum
Louvers & Baffles
(Style 1) for Lay-in-Grid or T-Bar Systems
(Style 4) for Lighting Door frame Fixtures
Lumiflux L14 is the industry standard shallow
parabolic aluminum louver.
• L14 is designed to fit most lighting fixtures
• Depth of 1.4”
• Cell configurations that satisfy typical applications.
Parasquare 1: 1/2” x 1/2” x 1/2”
Parasquare 2: 1-1/2” x 1-1/2” x 1”
Parasquare 3: 3/4” x 3/4” x 1/2”
Parasquare 4: 3” x 3” x 1-1/2”
Parasquare 5: 3/4” x 3/4” x 3/8”
Decorative Louvers
Straight Blade Baffle ATTB:
The elemental simplicity of Aluminum Thincell Straight
Blade Baffles compliment the widest range of interior
decors.
• 45 degree cut-off
• cross blades 1” (25mm) deep
• 1” (25mm) on center and available in trimmable widths
• Custom widths, blade centers and side details are
available for luminaires and ceiling applications.
Decorona™ 33 and 50 offer the original “circle
within a square motif”
Parahex: P6’s® hexagonal cells offer equally
high degrees of brightness control in the
parallel, perpendicular and diagonal zones.
Louver Features
Materials:
• Styrene
• Acrylic
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication
Standard Finishes:
• Specular Silver
• Permalux
• Aluma-Lux
• Black
• White
• Specular Gold
Lumiflux LB14 Parabolic Baffle:
• Cross blades 2” (51mm) or 3” (76mm) on center
• Can be manufactured to meet specific requirements.
• Nonflammable aluminum baffles are 1.4” (35mm)
deep to assure maximum luminance control.
• Each 4’ part begins and ends with a half cell (1” or
1-1/2”) so that the baffles can be butted end to end
for a continuous appearance.
Parabolic Louvers
All SLP Parabolic Louvers are available:
Style 1
Style 4 and 5
Parabolic Aluminum
Louvers & Baffles
(Style 1) for Lay-in-Grid or T-Bar Systems
(Style 4) for Lighting Door frame Fixtures
Lumiflux L14 is the industry standard shallow
parabolic aluminum louver.
• L14 is designed to fit most lighting fixtures
• Depth of 1.4”
• Cell configurations that satisfy typical applications.
Parasquare 1: 1/2” x 1/2” x 1/2”
Parasquare 2: 1-1/2” x 1-1/2” x 1”
Parasquare 3: 3/4” x 3/4” x 1/2”
Parasquare 4: 3” x 3” x 1-1/2”
Parasquare 5: 3/4” x 3/4” x 3/8”
Decorative Louvers
Straight Blade Baffle ATTB:
The elemental simplicity of Aluminum Thincell Straight
Blade Baffles compliment the widest range of interior
decors.
• 45 degree cut-off
• cross blades 1” (25mm) deep
• 1” (25mm) on center and available in trimmable widths
• Custom widths, blade centers and side details are
available for luminaires and ceiling applications.
Decorona™ 33 and 50 offer the original “circle
within a square motif”
Parahex: P6’s® hexagonal cells offer equally
high degrees of brightness control in the
parallel, perpendicular and diagonal zones.
Louver Features
Materials:
• Styrene
• Acrylic
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication
Standard Finishes:
• Specular Silver
• Permalux
• Aluma-Lux
• Black
• White
• Specular Gold
Lumiflux LB14 Parabolic Baffle:
• Cross blades 2” (51mm) or 3” (76mm) on center
• Can be manufactured to meet specific requirements.
• Nonflammable aluminum baffles are 1.4” (35mm)
deep to assure maximum luminance control.
• Each 4’ part begins and ends with a half cell (1” or
1-1/2”) so that the baffles can be butted end to end
for a continuous appearance.
Eggcrate Louvers
Retrofit Kits
Retrofit Kits assemblies are designed to be installed between an existing
lighting fixture and the inverted tee bar ceiling system.
RFK3™
Retrofit any existing lay-in fixture into a deep cell
parabolic aluminum louver.
T Series:
1/2” x 1/2” x 1/2”
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
2’x4’: 12, 18 or 32 cell
2’x2’: 9 or 16 cell
Finish: Semi-Specular or White
RFK2™
Retrofit any existing lay-in fixture (including 3”
deep aluminum) with a standard white steel door
frame. 1/2” Frame will accept any lens, louver or
eggcrate.
TC Economy Grade:
1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
2’x4’, 2’x2’ and 1’x4’
Aluminum Eggcrate
ANY Lay-in Light Fixture that has an existing
Lens, Louver, or Eggcrate installed.
AT: 1/2” cube aluminum
1. Remove and discard existing door frame.
2. Ensure that there is clearance in plenum area, then lift up the existing fixture.
(Clearance Required: 1” for RFK2, 2-1/4” for RFK3)
3. Install outer frame into T-bar and place the existing fixture on top of outer frame.
4. Install the RFK2 or RFK3 into the outer frame and latch closed.
Before:
After:
AT1: 1” cube aluminum
.50”
12,7mm
.50”
12,7mm
1”
25,4mm
Finishes: baked white enamel, mill finish, clear anodized or black enamel.1”
25,4mm
Custom sizes available.
Wraparound Lenses
Lenses
•
•
•
Injection Molded Wrap Around Lenses
Endcaps, Springs and Clips
A wide selection of replacement wraparound lenses
Translucent Acrylic:
• Frosted White or Matte Clear
• Thickness: .040” or .080”
• Standard sizes up to 2’x4’
Cracked Ice:
• Styrene
• Frosted White or Clear
• Thickness: .065”, .070” or .125”
• Standard sizes up to 50’x100’
Prismatic Pattern 12:
Industry standard 3/16” female prismatic
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene
• Standard sizes up to 50”x100”
Prismatic Pattern 15:
Bold 3/8” female prism of Pattern 15 offers reduced
glare and an upgraded appearance.
• Thickness: .200”
• Standard sizes up to 4’x4’
Prismatic Pattern 19:
3/16” male prism of Pattern 19 offers the
lowest glare of the prismatic lenses.
• Thickness: .156”
• Standard sizes up to 4’x4’
Outdoor Replacement
Components
Injection Molded Drop Lens:
• 12” x 12” DL-A-1212 OR DL-PC-1212
• 20” x 20” DL-A-2020
Our precision injection molded drop lenses
provide maximum controlled illumination.
They have an asymmetrical light distribution
designed specifically for service station and
parking lot applications.
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White or
Linear Prism
ACOUSTICAL CEILING PRODUCTS
PRISMATIC LENSES - WRAP AROUND LENSES - OUTDOOR REPLACEMENT
LENSES PARABOLIC LOUVERS - DECORATIVE LOUVERS
EGGCRATE LOUVERS - ALUMINUM EGGCRATE - ALUMINUM LOUVERS
Products for Today’s Office and Retail Environment
SLP LIGHTING
1400 S. OLD HIGHWAY 141
FENTON, MO 63026 USA
SLP LIGHTING WEST
16423 BERWYN ROAD
CERRITOS, CA 90703 USA
PHONE: 800.248.0224 / 636.600.4084
FAX: 636.600.4108
[email protected]
WWW.SLPLIGHTING.COM
PHONE: 562.404.1440
FAX: 562.404.4711
V04062015
Build. Excellence. Within.
Ceilings & Interior Systems
Construction Association
Build. Excellence. Within.