Spares and Accessories Brochure

Transcription

Spares and Accessories Brochure
The art of powerful cleaning...
Spares and Personal
Protection Equipment
A selection of popular items from our extensive range
02
BLAST ACCESSORIES
0845 7697225
BORON ALLOY NOZZLE
Airblast’s Boron Alloy, cast flanged noz­zles are se­cured with a
light­weight noz­zle retaining nut and flat nozzle gasket. Suits
all standard coarse thread 1” and 11/4” noz­zle holders.
Bore x length Stock No.
5/16” x 5 1/2
3/8” x 6 1/2
7/16” x 7 3/4
1/2” x 9
Coarse thread
retaining nut
NOZABSD5X01
NOZABSD6X01
NOZABSD7X01
NOZABSD8X01
CONRN01
Minimum order
6 mixed sizes.
QUICK COUPLINGS AND
NOZZLE HOLDERS
DOUBLE VENTURI NOZZLE
THE NEW DOUBLE VENTURI NOZZLE OFFERS
A MAJOR ADVANTAGE WITH STAINLESS STEEL
The double venturi offers a 35% larger
blast pattern than a standard long
venturi with only a very slight loss in
abrasive velocity.
Designed to be used on jobs where medium cutting
action is required, with a more even dispersion
of abrasive throughout the larger blast pattern.
Available in Structured Ceramic or Tunsten Carbide.
Structured
Ceramic Nozzles
Stock No.
Bore Size 3/8”
Bore Size 1/2”
NOZDV650SC
NOZDV850SC
Tungsten Carbide
Stock No.
Bore Size 1/4”
Bore Size 5/16”
Bore Size 3/8”
Bore Size 7/16”
Bore Size 1/2”
NOZDV450TC
NOZDV550TC
NOZDV650TC
NOZDV750TC
NOZDV850TC
TUNGSTEN NOZZLE
SHORT NOZZLES
Robust and efficient, the Tungsten Nozzle is available in
both long venturi nozzle format with coarse 50mm
threaded aluminium casing. Fine thread also available.
Airblast offers a full range of short straight nozzles for small
diameter hoses used in cabinets or portables. Available with
tungsten or boron carbide liners with aluminium cases and
fine or large threads. Internal diameters of 1/8” to 1/2” ensure
you have the nozzle to suit your particular application.
VENTURI
Bore x Length Stock No.
1/4” x 5 1/2”
5/16” x 6”
3/8” x 7”
7/16” x 8”
1/2” x 9”
NOZATSDX450
NOZATSDX550
NOZATSDX650
NOZATSDX750
NOZATSDX850
SILICON CARBIDE NOZZLES
Airblast’s Silicon Carbide long venturi wide throat nozzles
out-perform any nozzle in their class. Giving you outstanding
per­form­ance and life span, with a design life of 1500 to
2000 hours. Includes 50mm thread, plas­tic impact
resistant cas­ing.
SILICON
Bore x Length
Stock No.
3/16” x 4 1/4”
1/4” x 5 1/4”
5/16” x 5 3/4”
3/8” x 6 3/4”
1/2” x 7 1/8”
1/2” x 9”
NOZSLVE350
NOZSLVE450
NOZSLVE550
NOZSLVE650
NOZSLVE750
NOZSLVE850
TUNGSTEN
Bore x Length Stock No.
BORON
Bore x Length Stock No.
1/8” x 13/4”
3/16” x 13/4”
1/4” x 13/4”
5/16” x 13/4”
3/8” x 13/4”
1/2” x 13/4”
5/16” x 13/4” NOZABC6X
1/4” x 13/4” NOZABC4X
3/8” x 13/4” NOZABC5X
NOZAT2X
NOZAT3X
NOZAT4X
NOZAT5X
NOZAT6X
NOZAT8X
On ordering, ‘X’ denotes
F-fine or L-large thread.
ANGLED NOZZLES
Side exit nozzles to reach those awk­ward areas. Avail­a­ble in
sizes of 1/8” through to 3/8”. Ap­prox­i­mate­ly 3” long with
50mm coarse thread and tung­sten car­bide lined. Bo­ron car­bide range for alu­min­i­um ox­ide use are also avail­a­ble.
Bore
Stock No.
1/8”
3/16”
1/4”
5/16”
3/8”
NOZAAM2
NOZAAM3
NOZAAM4
NOZAAM5
NOZAAM6
Only small sample of range shown.
SPARES AND PERSONAL PROTECTION EQUIPMENT
QUICK COUPLINGS
Available in nylon, bronze or malleable iron. Suitable for
hoses sized 1” to 2 1/8” outside diameters. Simply fit
with screws or bonded couplings. (Gaskets available for all
types). New aluminium couplings also available. Ask sales
team for details.
Type
Stock No.
Nylon 1”
COCQPI
Nylon 11/4”
COCQP2
Bronze 1/2”
COCQ0
Bronze 1”
COCQ1
Bronze 11/4”
COCQ2
Bronze 21/8” ODCOCQ3
Type
Stock No.
Malleable IronPOT9C1
Pot Coupling
Bronze 11/4”POT9B
Pot Coupling
Bronze 1/2”POT1009
Pot Coupling
NOZZLE HOLDERS
Available in plastic and aluminium to suit most types of
nozzles. Available with fine or 50mm coarse threads and
nozzle retainers for the flanged nozzles. To fit 1/2”, 3/4”,
1” and 1 1/4” blast hoses up to 2 1/8” outside diameters.
Can also supply bonded nozzle holders and couplings with
test certificate if required.
Bore
Stock No.
Nylon 1/2”
Nylon 3/4”
Nylon 1”
Nylon 11/4”
Nylon 21/8” OD
COCHE0
CONH1
CONHP1
CONHP2
CONHP3
Unless indicated,
sizes shown are
ID of blast hose.
STRUCTURED
CERAMIC COMPOSITE
A Structured Ceramic Composite Noz­zle with a poly­urethane
jack­et us­ing a bonding tech­nique to eliminate sep­a­ra­tion.
The jacket ab­sorbs shock, en­sur­ing no dam­age to the liner
of the nozzle.
Size x Length
Stock No.
3/16” x 4 1/2”
1/4” x 4 1/2”
5 1/16” x 6 1/4”
3/8” x 7 1/4”
7/16” x 8 1/4”
1/2” x 9 1/4”
NOZSNV350
NOZSNV450
NOZSNV550
NOZSNV650
NOZSNV750
NOZSNV850
WWW.AIRBLAST.CO.UK
water separators and
pressure regulators
High efficiency water separators. 1 1/2” and 1/2” siz­es.
Es­sen­tial aid to remove moisture from your com­pressed air
supply. 1/2” and 1” pressure reg­u­la­tors to con­trol your output
whilst building clean­ing, bead peening or plastic me­dia stripping.
WATER SEPARATORS
Size
Stock No.
1/2”POTMT13
11/2”POTMT38
Element Repair Kit 1/2” POT10148A
Baffle Repair Kit 1/2”POTMT38BARK
BLAST ACCESSORIES
gaskets
Gaskets for all couplings and noz­zle holders. Listed here are a
small se­lec­tion of our stock items. Unless otherwise indicated
all sizes are ID of blast hose. Refer to the chart below.
NOZZLE GASKETS
Type
Stock No.
1/2” Flat
CONG0
SPARES
AVAILABLE
(Use with COCHEO 1/2” plastic nozzle holder)
1” Stepped CONG25
(Use with CONHP3 11/4” plastic nozzle holder and 1” entry nozzle)
11/4” Stepped CONG32
(Use with CONHP3 11/4” plastic nozzle holder and 11/4” entry nozzle)
PRESSURE REGULATORS
Size
Stock No.
COUPLING GASKETS
Type
Stock No.
1/2”POT10149
1”POT20
Repair Kit 1/2” POT10149B
Repair Kit 1” POT20K
1/2” Stepped
(Use with POT1009 1/2” bronze pot coupling and
COCG0
COCQ0
1/2” bronze hose coupling)
1” Stepped
COCG15
(Used with COCQP1 1” plastic hose coupling)
11/4” Stepped
blast hose
Airblast hose, with its antistatic outer case and lightweight
but tough in­ter­nal knitted nylon ply, gives you the best
com­bi­na­tion of wear, cost and safety ben­e­fits.
Superior quality 12bar blast hose offering exceptional value
for money. Other sizes available on request.
Size
COCG1
(Used with COCQ2 11/4”bronze hose coupling, 2 1/8” OD C0CQ3
(bronze hose coupling and POT9B/CI 1 1/4” pot coupling)
11/4” Stepped
COCG2
(Used with COCQP2 11/4” plastic hose coupling)
remote control valve
Stock No.
11/4” ID x 17/8” OD 12 barHOSEB32XX
1” ID x 11/2” OD 12 barHOSEB25XX
1/2” ID x 11/8” OD 12 barHOSEB13XX
11/4” ID x 21/8” OD 12 barHOSEB32HDXX
Remote control valves keep your operator safe and ensure
efficient use of media. Spares kits for other makes available
to suit. 1/2” and 1 1/4” sizes. Electro pneumatic version
also available.
Size
Stock No.
11/4”POTRCV125
Silencer, corePOTRCV12080
11/4” Repair kitPOTRCV12050
1/2” Suit 1028POTRCV50H
Hose available in
10, 20, 30 and 40
mtr lengths. When
or­der­ing XX de­notes
length required.
Complete range of
fully interchangeable
spares available for
the valve.
nozzle holder, hose and coupling assemblies
8DC<'*CdooaZ<Vh`Zi'*bb
l^i]'*bb>caZi&>9 EDI.8>8Vhi>gdc
Edi8djea^c\
8DC=E(EaVhi^XCdooaZ=daYZg
=DH:7('=9MM7aVhi=dhZ
&#&$)>9m'#&$-D9
8D8F(7gdcoZ$7gVhh
Fj^X`8djea^c\
8D8<&<Vh`Zi
('bb&#&$)
8D8<&<Vh`Zi
('bb&#&$)
8DC<('CdooaZ<Vh`Zi('bb
l^i]('bb>caZi&>9
EDI.77gdco Z$7gVhh
Edi8djea^c\
8D8FE'EaVhi^X
Fj^X`8djea^c\
8DC<'*CdooaZ<Vh`Zi'*bb
l^i]'*bb>caZi&>9
8DC=E'EaVhi^XCdooaZ=daYZg
8D8<&<Vh`Zi('bb
&#&$)
=DH:7('MM7aVhi=dhZ
&#&$)>9m&#,$-D9
8D8F'7gdcoZ$7gVhh
Fj^X`8djea^c\
8DC<('CdooaZ<Vh`Zi('bb
l^i]('bb>caZi&>9
EDI.8>8Vhi>gdc
Edi8djea^c\
8D8<'<Vh`Zi
('bb&#&$)
8D8<&<Vh`Zi('bb
&#&$)
EDI.77gdco Z$7gVhh
Edi8djea^c\
EDI.8>8Vhi>gdc
Edi8djea^c\
8DC<'*CdooaZ<Vh`Zi'*bb
l^i]'*bb>caZi&>9
8DC=E&EaVhi^XCdooaZ=daYZg
=DH:7'*MM7aVhi=dhZ
&>9m&#&$'D9
8D8FE&EaVhi^X
Fj^X`8djea^c\
8D8<&*<Vh`Zi('bb 8D8<&<Vh`Zi('bb
&#&$)
&#&$)
8DC<('CdooaZ<Vh`Zi('bb
l^i]('bb>caZi&>9
EDI.77gdco Z$7gVhh
Edi8djea^c\
<EH8B7IJFEJI'&(.8B7IJC7J;8K=
8DC<%CdooaZ<Vh`Zi&'bb
l^i]&'bb>caZi&$'>9
8D8=:%EaVhi^XCdooaZ=daYZg
=DH:7&(MM7aVhi=dhZ
&$'>9m&#&$-D9
8D8F%7gdcoZ$7gVhh
Fj^X`8djea^c\
8D8<%<Vh`Zi&'bb
&$'
8D8<%<Vh`Zi&'bb
&$'
EDI&%%.7gdcoZ$7gVhh
Edi8djea^c\
SPARES AND PERSONAL PROTECTION EQUIPMENT
03
04
BLAST ACCESSORIES
0845 7697225
air hoses and whipchecks
Airblast air hose is tested to three times working pressure
and is avail­a­ble in sev­er­al popular sizes. Also avail­a­ble, heavy
duty bolt­ed couplings to suit above. Stay safe with Airblast
whipchecks, air hose safe­ty devices that keep your hose from
com­ing adrift while you move about.
AIR HOSES (ID)
Description
Stock No.
Air Hose Bare Ends 3/4”HOSECA19X01
Air Hose Assembly 3/4”HOSECA19X15
(with B&W Couplings)HOSECA37
Air Hose Bare Ends 11/2”
SUCTION/RECOVERY HOSES
OUR QUALITY HOSES ARE SUPPLIED WITH EITHER
POLYURETHANE, RUBBER OR PVC SHEATHING
Airblast’s quality suction recovery hoses
can be supplied with or without anti-static
wire element, non-spiral wire have nylon
helical coil.
Suction recovery hoses in either polyurethane,
rubber or PVC sheathing. Light or heavy duty.
Available in most popular sizes.
WHIPCHECKS
Description
Stock No.
CO22
CO23
3/4” – 11/4”
11/2” – 3”
GASKETS
Description
Stock No.
Rubber for 3/4” coupling
Spare leather washers
to suit large bore couplings
COBW7
COA26LWX10
Clamps and couplings to suit
3/4” and 11/2” fittings available.
Full range of couplings, joiners and gulpers to
suit most blast cleaning recovery applications.
Size (ID)
Stock No.
2”HOSESRHD50
3”HOSESRHD75
4”HOSESRHD100
5”HOSESRHD125
Other sizes available
on request.
abrasive metering values
airline nuts and tails
flange steel Tee and baffle
Steel grit valves and natural rub­ber lin­ers to­geth­er with
forged steel tees, flanges and hex h/duty nipples in stock.
Suitable for all types of me­tal­lic abrasives. Expendable media
valves in siz­es from 1/2” through to 1 1/4”. Mon­i­tor­ing
abra­sive flow correctly is the route to eco­nom­i­cal op­er­a­tions.
Spares for all types available.
1/4” brass fittings for breathing air lines or recova hoses.
Available as separate parts. Hose tails secure to ribs on the
crimp clip. Hex nipples join your lengths. On larg­er di­am­e­ter
and great­er flows pres­sures our range en­com­pass­es 3/4”
and 1 1/2” steel couplings with bolted brack­ets to se­cure
to your air hos­es.
Replace those critical forged steel wear­ing parts before they
cause more costly repairs. Airblast stock large quantities of
nipples (both 3000 and 6000 PSI), tees and flanges for all
blast pot repairs.
Size
BRASS
Description
Forged Steel Tee 1/2”POT10145
Forged Steel Tee and Flange 1/2”POT10SGV01
Steel Flange 1/2”POT10SGV02
Forged Steel Nipple MM 1/2”POT10146
Forged Steel Tee and Flange 11/4”POTSGV1
Forged Steel Nipple MM 11/4”POT8A6
Steel Flange 11/4”POTSGV2
Stock No.
Flat Metering Valve 1/2”POT1007
Flat Metering Valve 1 1/4”POTEGV32
Steel Grit Valve 1”POTSGV32
1” SleevePOTSGV3RL
Steel Grit Valve 1/2”POT10SGV13
1/2” SleevePOT10SGV13L
Stock No.
Joiner 1/4” x 1/4”POTDMH23B
Tail 1/4”
COA16
Nut 1/4”
COA18
Crimp Clip 1/2”
COA17
BRASS
Description
Stock No.
Hose Tail 1/2”
Hose Tail 3/4”
Clamp & Bolts 3/4”
COBW12
COBW4
COBW8
STEEL GRIT VALVE PARTS
Description
FLAT SAND VALVE PARTS
Description
Stock No.
Stock No.
Baffle Grit Pipe 11/4”POT29
Y-piece rubber lined 11/4”POT8
Minimum order 6
mixed sizes.
pop up valves
and sealing rings
Airblast pop-up valves, stems and rubber seal­ing rings suit
most blast pots on the market. Low cost replacements keep
your run­ning costs down and your productivity up.
Description
Stock No.
Large Pot Pop-upPOT2
Valve and Stem
Sealing Ring for allPOT5
large blast pots
Contractor Type Pop-POTNC22
up Valve and Stem
1028 TypePOT1005
Sealing Ring
1028 Type Pop-upPOT1002
Valve and Stem
Pop-up Valve only (flat)POT200
Pop-up Valve only (cove)POT201
SPARES AND PERSONAL PROTECTION EQUIPMENT
suction cup blast pistol
Low cost pistol for use with expendable media. Works on
very low air flows (6cfm). Ideal for producing quality finishes
on small parts. Complete with 1ltr. cup for easy handling.
Holds 2kg of media. Works with most fine abrasives.
Description
Stock No.
Pistol complete
BLAPIS01
BEST
SELLER
WWW.AIRBLAST.CO.UK
la-man filter
The LA-MAN extractor/ drier removes 100% of liquid
moisture and more than 99% of oil from your compressed
air without refrigeration or outside energy. Transforms all
compressed air applications giving clean, dry air.
LA-MAN extractor/driers really are the so­lu­tion to prob­lem
compressed air supplies, with their negligible pressure drop
and low maintenance costs.
Size
Stock No.
1–10CFMEXTDRY103
10–35CFMEXTDRY105
25–50CFMEXTDRY107
50–80CFMEXTDRY110
80–150CFMEXTDRY120
150–250CFMEXTDRY140
BLAST ACCESSORIES
bag splitter, sieve
and pot cover
A unique product, the automatic bag splitter ef­fort­less­ly opens
all media bags. Saves time and in­creas­es ef­fi­cien­cy. Blade is
re­mov­a­ble or re­vers­i­ble when re­quired and keeps the sieve
more rigid. All sizes fitted with robust handles. Full range of
sieves and pot cov­ers avail­a­ble or can be made to suit your
particular re­quire­ments.
SPLITTER and sieve
Size
Stock No.
LIDS (Non-hinged)
Size
Stock No.
14” dia.POT14S
20” dia.POT20S
24” dia.POT24S
14” dia.POT14C
20” dia.POT20C
24” dia.POT24C
Hinged available on request.
YOUR BLAST POT PRESSURE SHOULD BE TESTED EVERY 22 MONTHS.
AIRBLAST WILL TEST ANY SIZE OR MAKE. FOR FURTHER DETAILS CONTACT 0845 7697225.
eductomatic
blast and masking tape
deadman handle & lines
Proven hand portable closed cir­cuit system with all the
benefits of abrasive blast cleaning. Ideal where grit and
dust must be totally con­tained. Only 3kgs, with a 360°
swivelling blast head and supplied with six different
shaped heads. For those hard to reach areas.
Only 60 – 90CFM @ 90PSI required.
Strong and resistant to abrasion. Useful for many site
problems including masking threads, glass, finished
paintwork or keep­ing sheeting to­geth­er. Available 50mm
or 25mm wide and 50m long. We also stock a quality
paper based masking tape extensively used in the
paint­ing in­dus­try.
An essential el­e­ment in making the blast pot safe. Strong
and re­li­a­ble, our deadman handle is able to cope with the
most difficult con­di­tions. Prior to the rubber button making
the circuit complete a safety flipper must be pulled back,
making this one of the safest deadman systems on the
market. Lines col­our coded in red or yellow.
Description
Stock No.
Description
Stock No.
Size
Eductomatic
Dust bag only
Dust hose & clamp
Dust collector & hose
Master attachment
Round brush Serrated attachment
Angle attachment
BLAEDU2000C
BLAEDU2035
BLAEDU2016
BLAEDU2110
BLAEDU2092
BLAEDU20911
BLAEDU2091
BLAEDU2093
Blast Tape 50mm x 50m
Blast Tape 25mm x 50m
Masking Tape 48mm x 50m
TABL5050
TABL2550
TAMA4850
Deadman Handle POTDMH12030A
Rubber Button POTDMH12036
10m PVC 1/4” Deadman Line (red)HOSEDM10R
10m PVC 1/4” Deadman Line (yellow)HOSEDM10Y
20m PVC 1/4” Deadman Line (red)HOSEDM20R
20m PVC 1/4” Deadman Line (yellow)HOSEDM20Y
Stock No.
Unless indicated, sizes shown
are ID of blast hose.
Single bonded only.
IF YOUR BLAST CABINET NEEDS MODIFICATION OR RENOVATION,
CALL ONE OF OUR SPECIALIST ENGINEERS ON 0845 7697225 TO SEE HOW THEY CAN HELP.
pipe blasters
BNP GUN AND NOZZLES
Choice of nozzles give this unit the highest prac­ti­cal,
efficiency range of 2 x 1/4” to 2 x 3/8” (high production).
Suits tube with di­am­e­ter of 8” to 36” with various carriages.
Cleans pipes and tubes with 360° fan noz­zle from 2”
diameter with different stream straight­en­er up to 12”
diameter. Junior version for 1 3/8” to 2 3/8” tubes can be
supplied. Variable speed air winches are also available.
The BNP gun has been available in the UK for many years
and is one of the most popular suction cabinet guns around.
Available with ceramic, tungsten or boron carbide nozzles
(sold separately) and varying sizes of air jet, state specific
size when ordering.
Pipe size
Stock No.
8” – 36”PISP30300
2” – 12”PICI30010
11/4” – 2”PICI30025
THE ANSWER
TO INTERNAL
CLEANING
Description
Stock No.
BNP Gun
Tungsten 1/4”, 5/16” & 3/8”
Ceramic 1/4”, 5/16” & 3/8”
CABCLEBNP
CABCLEBNP1311X
CABCLEBNP1193X
NOZZLE BLAST LIGHT
A 12 volt light provides a highly concentrated output of
light, leaving the operator both hands free to operate at
maximum efficiency.
Description
Stock No.
12v LightLIGBL1B
Pk 100 LensesLIGBL3
BulbLIGBL2B
Prices exclude noz­zles.
SPARES AND PERSONAL PROTECTION EQUIPMENT
05
06
BLAST EQUIPMENT / BLAST MACHINE PACKAGES
aquablast wethead
Suppresses dust and abrasive. Fits quickly to standard blast
nozzles. Works by forcing water into the blast stream as it
exits the nozzle.
0845 7697225
SAFETY WARNING SIGNS
When site blasting or painting use our durable white correx
warning signs to ensure the general public are kept aware.
Description
Stock No.
Aquablast Wethead WEBLAR01
Blasting 810mm x 610mm
Painting 810mm x 610mm
SIBL
SIPA
blast mate bug
miniblaster
malleable iron components
A handy addition to every busy workshop, garage etc.
This aggressive cleaning tool packs out of the way until
required. Complete with expendable grit valve, 5m x 12
bar blast hose, water separator, pressure regulator, nozzle
and nozzle holder, or as an excellent value kit comprising
bug, CE approved helmet, in-line breathing filter, blasting
tunic and gloves.
Low cost, manual, pressure pot ideal for light surface
cleaning on materials such as cars or iron gates. Uses ultra
fine abrasives to produce excellent results. Will work on a
compressor as small as 13cm.
Wide range of malleable iron fittings to suit all blast pot repair
situations from stock.
Size
Stock No.
Description
Stock No.
Bug Unit
BLABUG04
Nozzle size
Air Requirement
1/8”
3/16”
1/4”
13cfm at 60PS
35cfm at 70PS
80cfm at 100PS
MAKE
THE PUBLIC
AWARE
Description
Stock No.
Miniblaster complete Tungsten Carbide Nozzle
BLAMINPOT01
BLAMINPOT02
SPECIAL
OFFER
Description
Stock No.
Union Elbow M/F 11/4”POTNC13
Union M/F 11/4”POT124
Union M/F 1”POT66
Union F/F 1”POT56
Nipple M/M 11/4” x 11/4”POTN2
Nipple M/M 11/2” x 1”POT59
Nipple 2” x 11/2”POT76
Nipple 11/2” x 11/4”POT63
Bush 11/2” x 1/2”POT89
Bush 11/2” x 3/4”POT30
Bush 11/4” x 1”POT100
Bush 11/2” x 1”POT90
Choke Valve 1/2”POT1001
Choke Valve 1 1/4”POT21
Equal Tee F 1”POT58
Pitcher Tee F 11/4”POTNC14
Tee 11/4” x 11/4” x 1”POT53
Sockets F 11/4”POT2E
Elbow F swept 1”POT86
Elbow F swept 11/4”POT45
Elbow F/F 11/4” x 11/4”POTNC37
Elbow F/F 1” x 1”POTNC34
AS A MAJOR INDUSTRY SUPPLIER OF ABRASIVE BLAST EQUIPMENT, AIRBLAST OFFERS A FULL RANGE
OF INTERCHANGEABLE SPARES FOR MOST OTHER BRANDS IN THE MARKET.
THE PORTABLE BLAST MACHINE
SPECIAL OFFER BLAST SYSTEM DEALS
The Ergotech range of portable blast machines combing high
standards of manufacture and component quality with an
emphasis on ergonomic design. Available in 200 (formerly
2452 type), 110 (formerly 2040 type) and 60 litre (formerly
1440 type) machines, these have all the valve combinations
of our previous range. They are configured differently with
exposed pipework and valves now enclosed within the two
rail type handles, so immediate protection is offered to
them. Also, the design of the rails themselves offer far more
than a standard handle, with ease the machines may be
rolled from the upright position to a horizontal position for
transport, storage etc. The front leg has also been utilised
for all air connections whilst also offering an understorage
compartment for small tools, pressure test certificates etc.
All prices include SGV or EGV, remote control and moisture trap. Nozzles not included, see page 2.
Type
Litre
ABSC 1028
ABSC 1440
ABSC 2040
ABSC 2452
20
60
110
200
Capacity
Kgs
Lbs
28
82
150
273
60
180
328
600
Dimensions
mm (Dia x H)
Weight
kgs
Piping
ID
225 x 745
355 x 1.135
500 x 1.0001
610 x 1.350
27
651
151
1751
1/2”
11/4”
11/4”
11/4”
PACKAGE A
PACKAGE B
Blast pot plus water seperator only.
As Package A plus 10m x12bar
blast hose, quick coupling, nozzle
holder, deadman lines and
deadman handle.
Airblast equipment unique features:
Construction: Heavy gauge pressure vessel fabrication,
tested to 15 bar (225 psi) giving a safe working pressure
of up to 7.5 bar (100psi). All machines supplied with full
international pressure certificate.
Piping: On all machines is 1 1/4", with long-life rubber lined
parts fitted where necessary (except the 1028 type which
has 1/2" piping).
Pop-up Valve: Free moving, heavy duty; giving instant
response to pressurisation, even at low working pressures.
Concave top and Conical bottom: Allows rapid easy
filling and ensures free flowing exit of all types of media.
Large inspection hatch: With quick release for ease of
inspection and servicing.
Metering valves: Full range including flat, expendable grit
valve (EGV), giving unrivalled economy with expendable
abrasives and steel grit valve (SGV) with replaceable liner
for recyclable abrasives.
Mobility: Machines fitted with large heavy duty wheels
for maximum mobility on site.
Sieves and pot covers: Durable and well designed with
handles and unique optional bag splitters, ensuring no
foreign bodies or rain get into the blast pot.
Widest range of sizes: Available to the industry, giving users
the choice to get the right machine for the job in hand.
Also, specials made to particular requirements.
SPARES AND PERSONAL PROTECTION EQUIPMENT
PACKAGE C
PACKAGE D
As Package B plus Bullard 41 Model
Air Filter and breathing line.
As Package C plus blast gloves and CE approved helmet.
0845 7697225
GLASS BEAD
Produced from soda-lime, glass beads are used for peening and
the removal of almost any surface blemish. They can be used
safely for texturing or producing attractive cosmetic finishes,
without damaging the base material. Being totally inert, there
is no risk of corrosion or any contamination. Unless excessive
blasting occurs there is no alteration in the dimensions of the
treated surfaces. Strict control of both manufacturing and
grading processes ensure consistency of finish.
25Kg bags shrink wrapped on 1 tonne non-returnable pallets.
ALUMINIUM OXIDE
Virgin Brown Aluminium Oxide is a sharp, fast-working abrasive
ideally suited for hand cabinets and blast rooms. Used wet
or dry, where ferrous blasting abrasives are not suitable due
to the risks of corrosion and magnetisation involved. Ideal for
extremely hard workpieces. Reclaimed aluminium oxide is a
cheaper alternative to virgin brown but not as cost effective,
due to increased breakdown when blasting at high pressures.
White and pink aluminium oxide also available.
MEDIA
Grade Microns
A
B
C
AB
AC
AD
AF
AG
AH
AQ
Size
12
14
16
20
24
30
36
46
54
590–840
420–590
250–420
177–297
149–250
105–210
74–149
53–105
44–88
30–60
Mesh
Size
Equivalent (mm)
1.68–2.0
1.41–1.68
1.19–1.41
1.0–1.19
0.71–0.84
0.59–0.71
0.50–0.59
0.35–0.42
0.297–0.35
60
70
80
90
100
120
150
180
220
0.25–0.297
0.21–0.25
0.177–0.21
0.149–0.177
0.125–0.149
0.105–0.125
0.074–0.105
0.062–0.088
0.053–0.074
Steel shot
Made from high carbon, tempered steel providing durability and resistance to fracture. Used for
peening and cleaning. Typical applications include metal improvement, stress relief, removal of
heat treatment residue, mill scale, rust, paint and sand from castings.
Steel GRIT
Cleans quicker than shot but breaks down at a faster rate. Steel shot or grits are not suitable
for certain applications and surface corrosion may occur after treatment. Immediate coating or
temporary protection is essential. Metallic abrasives are available in three different types with
suitability depending on application.
chilled iron
White iron structure which shatters on impact. Harder than steel with a quicker cleaning action.
For use in air driven machines to compliment their speed and flexibility. The grits are frequently
used to etch structural steel and components prior to coating with paint, metal spray or plastics.
Grade Micron Cleanliness
Standard
Garnet is dense, tough and dust free for fast cleaning and
coating removal. Particularly suitable where material can be
recycled, making it very economical. Generally works 30% 50% faster than slag grits, due to its higher density.
Medium 200/600
Sa3
Corse
Fine
Sa3
Sa3
COPPER SLAG
Grade
An expendable synthetic mineral abrasive which is widely
favoured for open nozzle blasting applications by virtue
of its fast rates. A range of grades are available to suit
most applications.
0.0234–0.0331
BT3
400–800
203
0.0165–0.0234
BT4
200–600
204H8
0.0098–0.0165
BT5
BOL21
300–400
205H9
0.0070–0.0117
BT6
BOL23
150–300
206H10
0.0059–0.0098
BT7
BOL24
149–250
207H12
0.0041–0.0083
BT8
BOL25
100–150
208H13
0.0029–0.0059
BT11
BOL27
74–149
209H14
0.0021–0.0041
BT12
53–105H16
0.0017–0.0035
BT13
0–100H18
0.0012–0.0024H22
Equivalent (mm)
metallic media
garnet
InchesAlternative Supplier Reference
20–36
30–40
40–60
50–80
60–100
70–140
100–200
140–270
170–325
270–500
500/1000
150/300
MS–XPX
MS–XP
MS–P
MS–XH
MS–H
MS–M
MS–ML
MS–L
MS–XL
Tumbling Media sizes
Size Equivalent (mm)
Reclaimed
Blended sizes
12/16
16/24
24/30
30/40
40/60
60/80
80/120
120/220
2
3
3.5
4
4.5
5
6
7
-44
+22
-22
+16
-16
+13
-13
+8
hilled Iron
C
Ref No.
Size (mm)
Steel GriT
Ref No.
Size (mm)
Steel Shot
Ref No.
Size (mm)
G05
G07
G11
G17
G28
G39
G46
G55
G66
G05
G07
G11
G17
G28
G39
G46
G55
G66
0.125–0.3
0.18–0.42
0.30–0.71
0.42–1.0
0.7–1.2
1.0–1.4
1.2–1.7
1.4–2.0
1.7–2.4
0.125–0.3
0.18–0.42
0.30–0.71
0.42–1.0
0.7–1.2
1.0–1.4
1.2–1.7
1.4–2.0
1.7–2.4
S70
S110
S170
S230
S280
S330
S390
S460
S550
0.18–0.35
0.3–0.5
0.42–0.71
0.6–0.85
0.71–1.0
0.85–1.2
1.0–1.4
1.2–1.7
1.4–2.0
Media must be kept in a dry environment to prevent it from solidifying
ALL MEDIA IS AVAILABLE IN STANDARD
50KG BAGS OR 25KG BAGS*
TO ORDER CALL 0845 7697225
at additional cost
*
Grain Average Cleanliness Typical Application
Size (mm) Max Profile* Standard*
Extra Fine
0.1–0.8
25–45
Sa3Wet blasting, motor bodywork, selective coating removal, timber cleaning
Fine
0.2–1.7
60–90
Sa3
Selective coating removal, steelwork, tanks, pipes, brickwork and concrete
Coarse
2–2.5
100–150
Sa2
Marine growth, cement buildup, heavy corrosion and concrete exposed *
aggregate blasting
On mild steel
plastic media
Type II
Made from Urea, more aggressive than Type V suits light industrial cleaning. For use at low
pressure its fast, efficient and non-damaging. A cost effective replacement for chemical stripping
and superb paint remover.
Type V
Made from Acrylic solves coating removal and surface preparation problems. Provides rapid coating
removal, minimal substrate abrasion and a low cost alternative to chemical stripping and sanding.
Physical Characteristics
Type I
Type II
Type III
Type V
MOHS
3.0
3.5
4.0
3.5
Barcol
34–42
54–62
64–72
46–54
Specific Gravity (gms/cc)
1.15–1.25
1.47–1.52
1.45–1.52 1.15–1.20
Bulk Density (lbs./cu.ft.)
45–48
58–60
58–60
45–48
Max. Oper. Temperature (°F)
250
300
350
200
Chemical NatureInertInertInertInert
GLASSIA GRIT
Multi-purpose expendable abrasive, safe alternative to silica sand suitable for cleaning brick, stone, concrete, wood, stainless steel
and soft alloys to provide a fine profile prior to coating application or a decorative satin finish. Ideal for applications where a light
coloured abrasive may be more aesthetically or environmentally acceptable.
Grades
Medium: Fine: Ultra Fine: OLIVINE
Grade
Airblast Olivine is a naturally occurring silica free material of low specific density and is available in four sizes. Olivine is particularly good
for many light blasting applications, and has proven very popular with expendable users. It is sand coloured and highly suitable for wet
blasting and building cleaning where darker medias may cause a nuisance, for instance on clean up or with impingement. Airblast
Olivine being iron free and containing no free silica can also be used on stainless steel and aluminium surfaces for coating preparation
or removal applications.
AFS80
AFS50
AFS30
AFS20
0.50 – 1.25 mm in 50 kg bags
0.20 – 0.50 mm in 50 kg bags
0.09 – 0.20 mm in 50 kg bags
Size Range (mm)
Surface Profile*
0.090 – 0.250Extra Fine
0.125 – 0.500Fine
0.180 – 1.000
Medium
0.355 – 2.360
Coarse
Achieved in Mild Steel (BS 7079)
*
SPARES AND PERSONAL PROTECTION EQUIPMENT
07
08
PERSONAL PROTECTION EQUIPMENT
0845 7697225
HELMET COMMUNICATIONS
EAR DEfENDERS AND PLUGS
helmet communication systems available in many
variations, including a radio system. Comprises of lightweight ear protectors incorporating twin speakers and
microphone, which excludes background noise. Belt-fitting
control box (battery powered) allows individual volume
control. Keep in contact for increased safety.
Just part of a range of ear defenders, developed to meet
widely differing individual requirements or site conditions.
The products are suited to varying sources of noise, both
indoor or outdoor, enabling you to work in greater safety
and security. Slimline defenders provide greater comfort
and mobility when worn beneath blast helmets.
Description
Stock No.
Slimline headset
Noise cancelling throat mic
Radio
COM001
COM002
COM003
Description
Stock No.
ear Defenders
ear plugs (pk 10 pairs)
ppeeD1
ppeep1
DISPOSABLE SUITS AND HOODS
One-piece hooded z­ipped suits and hoods made from
durable Tyvek. with sealed seams, they give excellent
protection against paint splashes, rust and dust.
Overshoes also available.
Description
Stock No.
hooded Disposable suits
Disposable hoods
plastic disposable overshoes
ppepDS1
ppepDh1
ppepDOS10
GREAT VALUE
DISPOSABLES
Disposable ear plugs
also available.
PROTECTIvE GLOvES
Airblast stocks a wide range of protective leather, cotton
and rubber blasting gloves, gauntlets and surgical paint
spraying gloves.
HOODED
INSPECTION SUIT
HEAvY DUTY
BLAST SUIT
heavy duty all cotton hooded
inspection suit ideal for many
operations in blasting and
painting. features: reinforced
seat, knee and elbow sections,
hood with tie-cord, elasticated cuffs and ankles with a
crossover and velcro seal front.
lightweight and at a reasonable price it is an ideal working
suit for dirty operations.
Blast suits for long lasting
protection where abrasive rebound is heaviest. Designed
to outlast most other suits
and protect you throughout
your work. The front is
made of durable leather
and the back of 100% cool,
comfortable cotton.
Size
Stock No.
Size
Stock No.
38” Chest
40” Chest
42” Chest
44” Chest
46” Chest
52” Chest
56” Chest
58” Chest
ppeCiSh38
ppeCiSh40
ppeCiSh42
ppeCiSh44
ppeCiSh46
ppeCiSh52
ppeCiSh56
ppeCiSh58
50”
52”
54”
56”
58”
ppeBS40500S
ppeBS40510M
ppeBS40520l
ppeBS405030Xl
ppeBS40531XXl
Description
Stock No.
extra heavy Duty gloves 24”
Rubber gloves 17”
Rubber gloves 24”
leather & Cotton Blast gloves
Rigger gloves
latex gloves
ppegRhD
ppegR17
ppegR24
ppeglC1
ppeglR
ppegll100
BREATHING AIRLINES
1/4” quality breathing air hose made from reinforced
polyester with high quality, clear pvC liner. fitted with 1/4”
brass swivel couplings for ease. Tested for working pressures
of up to 250psi, to BS 6066.
Description
Stock No.
Breathing line Assembly 1/4” x 10m
Breathing line Assembly 1/4” x 20m
hOSeBl10
hOSeBl20
If YOU CANNOT fIND wHAT YOU ARE LOOKING fOR,
PLEASE CALL US ON 0845 7697225.
QUALITY
HOSE
3M MASK
Organic vapour/particulate respirator for concentrations
below 65°c, 10 x Oel or 1000ppm, whichever is lower.
Suitable for use under COShh, meets eN405 ffA ipi.
This quality, low cost mask is lightweight and adjustable,
therefore ideal for many applications.
Description
Stock No.
Organic vapour Dust Mask
Organic/unorganic vapour
& Acid gas Respirator
ppeRD4251
ppeRD4277
HELMET DISINfECTANT
Aerosol disinfectant spray to suit all types of protective
helmets, ideal for blast helmets and paint spray hoods.
Suitable for broad spectrum microbiocidal, together with
fungicidal and algaecidal activity. Controls legionelle
pneumophila. This powerful formulation disinfectant
spray prevents the spread of potentially dangerous germs.
Aerosol container holds 400ml.
CC20 SPRAY MASK
Airblast CC20 air fed spray mask gives excellent
comfort for all operators spraying or working in dusty
environments. A large (6.5” x 14”/ 165mm x 350mm)
lightweight window makes this mask superior to most.
Available with tear-off lens if required. Designed to be
used with the Airblast 41 filter and/or climate control
tubes. Supplied complete with belt and air control.
Description
Stock No.
CC20 Spray Mask and lens
Spray hood only
Tear-off lens x25
ppepSh20ABT
ppepSh20
ppepSh20lC
SpAReS AND peRSONAl pROTeCTiON eQuipMeNT
GREAT
VALUE FOR
MONEY
Description
Stock No.
Aerosol x 1
Aerosol x 12
ppeADS
ppeADS12
KILL
THOSE
BUGS
WWW.AIRBLAST.CO.UK
PERSONAL PROTECTION EQUIPMENT
model 41 breathing filter
Airblast Model 41 air breathing fil­ter with pres­sure regulator.
A sev­en stage fil­ter which re­moves most oil, mist and va­pour
down to 0.5 mi­crons. Min­i­mum spares re­quire­ment with
long-life car­tridge, en­cased in a cor­ro­sion-proof plas­tic,
in­corpo­rat­ing the seal­ing gas­ket. 1/4” line takeoffs. Rugged
steel construction. Free standing or wall mount to suit.
All units will feed two operators.
Description
£50 OFF
WHEN YOU
TRADE IN YOUR
OLD HELMET
Stock No.
Breathing FilterPPEFILABP2
Replacement CartridgePPEFIL41AFC
Male Coupling Plug 1/4” BSPPPE002
Male Quick Release Coupler 3/8”PPE004
Regulator Assembly with GaugePPEFIL41P2R
PROTECT
YOUR
OPERATOR
AIRBLAST BULLARD 88 HELMET
THE USA’S BEST SELLING BLAST HELMET
CE APPROVED - Airblast Bullard 88 Air-Fed
helmet is the result of years of field
proven ex­pe­ri­ence in performance and
research, giving operators great­er
pro­tec­tion and comfort than ever be­fore.
Wider and deeper than most other brand helmets,
allowing full com­fort for the wear­ing of glass­es or
commu­ni­ca­tion sys­tem head sets. Optimum
vis­i­bil­i­ty with wide view angle face shield. Dou­ble
shell con­struc­tion pro­vides top im­pact, sound and
pen­e­tra­tion pro­tec­tion.
Description
Stock No.
Helmet CompletePPEHELB88
Cape (standard)PPEHELB8841022
Long CapePPEHELB8813644
Window Frame KitPPEHELB88889
Inner LensesPPEHELB88771040
Outer Tear-off Lenses x6PPEHELB88771LC
Outer Non-Tear-off Lenses x100PPEHELB88OIX100
Regulator onlyPPEHELB88F40
Window GasketPPEHELB887713
Breathing TubePPEHELB8888BT
Includes low air warning device.
Apollo helmet
One of the most popular helmets in the UK market, its
enduring popularity stands testament to this helmet’s
comfort and affordability.
cartridge filters
Cartridges are avail­a­ble for many breathing fil­ters on
the market. Listed be­low are some of the more pop­u­lar.
If you don’t see the type you require our Sales/Tech­ni­cal
de­part­ment will be hap­py to give you a quote.
Description
Description
Stock No.
Model 41PPEFIL41AFC
CPF FilterPPEFILCPF3547
CAP 2nd TypePPECAPS2
CAP 1st TypePPECAPS3
Domnic HunterPPEFILK006AA
Domnic HunterPPEFILK006AC
Domnic HunterPPEFILK013AC
Domnic HunterPPEFILK220
climate control tubes
panorama blast helmet
Avail­a­ble in two versions: cool tube and warm/cool tube.
Maintains op­ti­mum control over op­er­a­tor’s en­vi­ron­ment,
in­creasing pro­duc­tiv­i­ty and com­fort. Fitted on con­trol
belts or di­rect from fil­ter sys­tems, the cool tube can
re­duce air tem­per­a­ture by up to 20°c, the warm/ cool
tube by 18°c ei­ther way. Both suit the mod­el 41 filter.
For cer­tain hel­mets only fit a vor­tex warm/cool mod­el.
Offers good pro­tec­tion against grit and dust. The helmet is
supported by an ad­just­a­ble fi­bre­glass headband with an
outer rubber cov­er aiding abra­sion and ab­sorption of noise.
Fitted with el­lip­ti­cal lens holder with polycarbonate safety
win­dow and re­mov­a­ble cape. PVC coat­ed ny­lon and cot­ton
in­ner bib. Air sup­ply hose is fitted to waist belt.
Description
Stock No.
Warm/Cool Tube (+ –18°c)PPEPSHAC2000
Cold Tube (–20°c)PPEPSHAC1000
Warm/Cool Vortex (+ –28°c)PPEPSHAC40460
Economy Climate Control TubePPESPHAC43200
Stock No.
Airfed HelmetPPEAPHLP60CE
Inner Safety LensPPEAPHILX01
Intermediate LensPPEAPHMLX01
Outer Tear-offs (Pkt of 6)PPEAPHOL6TX01
Cape and LinerPPEAPHRC4435
Window Latch KitPPEAPHO4368
Window GasketPPEAPH04452
Window Frame KitPPEAPH08741
Suspension AssemblyPPEAPH10532
Apollo Inlet Filter KitPPEAPH04381
Chin StrapPPEAPH04460
Outer Non-Tear-offs (Pkt of 100)PPEAPHOLX100
Description
Stock No.
protecta EXTREME
blast helmet
Man­u­fac­tured from fi­bre­glass, sup­port­ed by an ad­just­a­ble
head­band. Fit­ted with a large, oblong hinged vi­sor with a
glass outer and acryl­ic inner lens. De­tach­a­ble pro­tec­tive
cape, made from abra­sion re­sist­ant PVC coat­ed ny­lon,
attached to the hel­met by a ten­sion ring. In­ner muf­fler
is attached to the cape by a zip.
Panorama HelmetPPEHELPAN
Inner LensPPEHELPAN01
Outer Lens (Pkt of 100)PPEHELPAN02
Tear-offs (Pkt of 6)PPEHELPAN6TX01
Protecta HelmetPPEHELPRO
Protecta CapePPEHELPR640290
Lens (Pkt of 100)PPEHELPR001
Includes low air
warning device.
Includes low air
warning device.
Description
Stock No.
SPARES AND PERSONAL PROTECTION EQUIPMENT
09
10
TESTING EQUIPMENT
WWW.AIRBLAST.CO.UK
paint test equipment kit
This is a high specification kit which contains all the necessary
test equipment for anyone who has to measure and test paint
and associated applied coatings.
Standard contents: EBAN3000 (F), calibration foils (precision
measured) BS whirling hygrometer, digital thermometer, dew
point & RH% calculator, wet film gauge (stainless), Testex tape
roll (50 impressions), Testex snap gauge, burnishing tool, ISO
surface roughness comparator (for grit blast), steel zero plate
(precision ground).
Description
Stock No.
Paint Test Equipment
TETK2030
RH%-DEWPOINT METER
CONFORMS TO RS, ISO, ASTM AND SSPC.
The RH%–Dewpoint Meter allows you to
determine the relative humidity, dew point
and air temperature before the application
of a coating.
Specifications usually detail that the relative
humidity and the dew point temperature must
be strictly adhered to as well as monitoring the
surface temperature. Measurement accuracy of
±2% conforms to BS, ISO, DIN, ASTM and SSPC
methods of measurement. Calibration certificates
having traceability to UKAS are available. Supplied
in a carrying case with battery fitted. Alternative
equipment for determining the relative humidity
and dewpoint are the whirling hygrometer and
dewpoint calculator, see picture.
Description
Stock No.
Humidity equipment RH%–Dewpoint Meter
BS Whirling Hygrometer
Universal Dewpoint RH% Slide Calculator
TETH2005
TETH1001
TETH1002
Accessories
Stock No.
H2005 Calibration Certificate UKAS traceable
H1001 Calibration Certificate UKAS traceable
TETN1015
TETN1011
Tricomb
eban
A range of precision gauges for the quality control of wet film
paint thickness. All gauges have dual micron and mil scales.
Tricomb Disposable: designed for once only use, simply place
in the wet paint, note the wet paint thickness, allow paint to
dry and retain for future record. Conforms to BS, ISO, DIN,
ASTM, and SSPC methods of measurement.
Eban 1000 low cost analogue coating thickness gauge for
ferrous substrates. Read off thickness, or pass/fail. Easy to use
and reliable. Eban 3000 state of the art range with add-on
features, comes complete with carrying case, calibration foils,
measuring probes and battery. The features can be added
at modest extra cost; PC printout, batching, exclusive name,
mean no., limits, stats, 9 cal memory, profile, histogram, key
lock and many others to the Eban 3000.
Tricomb Stainless Steel
Description
Stock No.
Range 25µm to 1500µm 45 teeth Range 50µm to 5000µm 45 teeth
TETW2001
TETW1003
Tricomb Disposable
Description
Stock No.
Range 50µm to 900µm 18 teeth (200 off) TETW2005A
Range 50µm to 900µm 18 teeth (400 off) TETW2005B
Description
The Pintech is a multi-voltage pinhole detector which uses
the wet sponge principle to detect through pinholes, cracks
and damaged areas in coatings up to a maximum thickness
of 500 microns.
Operation is by the application of the wet sponge to the
coating. The wetting agent penetrates any pinhole and makes
a conductive path through to the substrate. The Pintech
automatically detects this conductive path and sounds an
audible alarm and also gives a visual warning by a flashing red
LED that a pinhole fault has been detected. The flaw can now
be marked for repair and further testing resumed.
Description
Stock No.
Pintech detector
Extension rod 500mm
Extension rod 1000mm
50mm diam circular sponge,
200mm extension
100mm diam circular sponge,
200mm extension
TETS3001
TETSA002
TETSA003
TETSA071
TETSA072
Stock No.
Eban 1000 Analogue for Ferrous Substrates
TEC1000
Eban 3000F Ferrous 0–1000 µm
TEC3000
Eban 3000N Non Ferrous 0–1000 µm
TEC3001
Eban 3000FN Ferrous/Non Ferrous 0–1000 µm TEC3002
Eban 3000FT5 Ferrous 0–5mm
TEC3003
testex tape and snap gauge
Quantity 10,000.
Own name
personalised.
Make low cost surface rep­li­cas of blast surface profiles that
can be measured and retained or attached to con­tract reports.
This unique simple tech­nique produces accurate profile meas­
ure­ments with the accompanying gauge and burnishing tool.
Testex tape available in two grades, coarse for profiles up to
2 thou­ (50 micron), x-coarse for pro­files from 1.5 thou to 4.5
thou­ (38 to 115 micron). Correct profile meas­ure­ments en­sure
that spec­i­fi­ca­tions have been ad­hered to and that coatings will
stay on for their optimum lifetime.
magnetic thermometer
Magnetic bi-metal
thermometer clamps
to steel surfaces and
meas­ures tem­per­a­ture.
PINTECH
profile comparator
Description
Stock No.
–30° to 50°c
0° to 120°c
TET1003A
TET1003B
SPARES AND PERSONAL PROTECTION EQUIPMENT
ISO standard comparator
for grit or shotblasting
profile. Each made from
high quality nickel with
four segments to conform
to fine, medium and
coarse profiles. Produced
and developed to
international standards
of surface preparation.
Description
Stock No.
Grit Comparator TEE1251
ISO 8503 Shot Comparator TEE1252
ISO 8503 Description
Stock No.
Testex Coarse
Testex Ex Coarse
Tape Burnishing Tool
Snap Gauge
TETA122C
TETA122EC
TETABT122
TETA122TSG
WWW.AIRBLAST.CO.UK
COATING ACCESSORIES
SILvER GUN
One of the more popular airless guns on the uK market.
Description
Stock No.
Max wp 3600psi
Max wp 7400psi
SpRgR243283
SpRgR236995
GRACO XTR SPRAY GUN
graco’s new, more powerful and easier to use, compact,
lightweight design offers flexibility in hard to reach places,
and is ideal for spraying primers, epoxies, urethanes and
fire retardant coatings.
Description
Stock No.
XTR 7 gun
SpRgR248612
GUN SWIVELS AND FILTERS
LARGE STOCKS ALWAYS AVAILABLE
guN SwivelS, AND guN Swivel filTeR SpAReS AvAilABle fOR AiRleSS, AiR ASSiSTeD,
eleCTROSTATiC AND CONveNTiONAl guNS.
FILTERS
Colour
Mesh Size
Stock No.
green
white
yellow
Red
30m
50m
100m
180m
SpRAghfg30X10
SpRAghfw50X10
SpRAghfy100X10
SpRAghfR180X10
3000PSI SWIVELS
Description
Stock No.
1/4” x 1/4” leather Seal
1/4” x 1/4” Teflon Seal
SpRgR239663
SpRgR223341
5000PSI SWIVEL FILTER
Description
Stock No.
3/8” x 1/4” leather Seal
SpRgR214925
FILTER ELEMENTS
Description
Stock No.
1/4” x 1/4” inline filter swivel
fine filter element100 Mesh
(to suit above)
Coarse filter element 60 Mesh
(to suit above)
SpRgR210500
SpRgR238561
SpRgR238563
RAC 5 AND GHD CLIPS
SC6 TIPS
TITAN vARIABLE TIP
graco RAC 5 and ghD reverse-a-flow quicktips together
with their adaptors for rapid cleaning of blocked tips. Most
siz­es always available from our large stocks. please note
this new evolution of the RAC tip range is compatible with
the RAC 4 tip holder.
The Titan SC6 tip range, successor to the SC5, is a self
cleaning reversible flow tip with a siz­e range 0.007 to
0.042. The posi-lock feature ensures that the tip is in
either the spray or reverse position. Only 3 parts with
1 multi purpose seal saves time and money. hand tight
safety guard which can be installed without tools. Suitable
for working pressures up to 5000psi (350 bar).
variable Titan tips available with adaptors and guards
to suit most airless guns. ideal for multiple product or
structural use with adjustable fan widths and orifice siz­es.
we stock spares and polo washers for all siz­es.
Size
Stock No.
gRACO
RAC 5
all siz­es
Tip Adaptor
gRACO
ghD
all siz­es
Tip Adaptor
286-4-11
286=No.
4=8” fan width 11=thou”
SpRgR243161
ghD 6 23
ghD=type
6=12” fan width 23=thou”
SpRgR222674
Size
Stock No.
Titan
SC6
all siz­es
641-2-19
641=No.
2=4” fan
width19=thou
Size
Stock No.
5–18 thou
7–19 thou
11–26 thou
17–35 thou
21–54 thou
Safetyguard
SpRTiTAN341015
SpRTiTAN341020
SpRTiTAN3410128
SpRTiTAN341041
SpRTiTAN341049
SpRTiTAN450100
GRACO XTREME PAINT PUMPS
AIRLESS SPRAY HOSE
POLE GUNS AND EXTENSIONS
graco’s new, more powerful and easier to use Xtreme
sprayers are designed to spray high solid and 100% solid
(solvent-free) coatings under rough conditions. graco’s
new Xtreme lower, combined with the improved King and
reliable Bulldog air motors, creates the ideal sprayer for
your protective coatings applications.
Available single or twin wire braided in 1/4” and 3/8” iD
coupled lengths. prices include couplings. hose sold in
multiples of 5m.
various models - the mini pole extensions make spraying
difficult areas much easier. Manufactured from durable
stainless steel and available from 6” - 24” lengths. The
maxi pole is available from 18” - 9’ lengths. Airblast can
also supply telescopic pole guns ranging from 3 -12 ft.
Size
Stock No.
68:1 King pump SpRgR238266
56:1 King pump SpRgR244482
45:1 King pump SpRgR244471
with cart complete.
Description
Stock No.
1/4” x S Braid 10m
15m
1/4” x T Braid 10m
15m
3/8” x S Braid 10m
15m
3/8” x T Braid 10m
15m
SpRAhA6SB10
SpRAhA6SB15
SpRAhA6TB10
SpRAhA6TB15
SpRAhA9SB10
SpRAhA9SB15
SpRAhA9TB10
SpRAhA9TB15
Description
Stock No.
fixed hD extension pole 2M
Mini pole
Maxi pole
SpRgR232125
SpRTiTAN61111XX
SpRTiTAN310154XX
XX denotes length required.
SpAReS AND peRSONAl pROTeCTiON eQuipMeNT
11
ALSO AVAILABLE FROM AIRBLAST
we have a range of brochures covering all aspects of the surface preparation industry.
To request a brochure call on 0845 7697225 or e mail [email protected]
PAYMENT DETAILS
SERVICE CONTRACTS
HIRE EQUIPMENT
The majority of the uK is covered by standard next
day delivery. Details of delivery pricing can be found
in the attached price list.
let us take the burden of servicing your blasting
equipment with an Airblast maintenance contract.
Our regular inspections by experienced and
knowledgeable staff, complete with a full written
report, allow you to concentrate on your business
rather than your machinery.
Rather than running to the expense of buying
equipment why not hire it at a fraction of the cost.
we have a range of Blast pots, eductomatics, pipe
Blasters, Airvacs and extractor fans.
Airblast accepts payment by cheque, all major credit
cards and BACS. BACS account details:
Try before you buy – Airblast can offer you a weeks
hire fOC when ordering the product.
Account Name: Airblast
Sort Code: 30-98-02
Account No: 01077445
lloyds Bank plc, 65 high Street, Stamford
lincolnshire pe9 2AT
CONTACT 0845 769772 fOR MORe iNfORMATiON.
Airblast account
Products and services
Contact us
To open an account, simply complete and
return the attached application form.
Blast rooms
Abrasive blast cabinets
Portable blast systems
Blast accessories
Lighting systems
Compressors
Dust recovery equip.
Paint spray booths
Coating systems
Coating accessories
Personal Protective Equip.
Media
Testing equip.
for further information on how our products
and services could benefit your company, please
contact us by any of the means below.
All products sold are subject to our standard
Terms and Conditions, which are available
on request. E&OE. Price does not include
delivery. we may use your details for
marketing purposes, including amongst other
things to identify and offer you by phone,
post or other means, any further products
which we think may be of interest to you.
If you do not wish to be contacted, please
call our Sales Department on 0845 7697225.
Design and build
Servicing
Reconditioning
Pressure testing
Training
Sample processing
Equipment hire
Airblast Ltd
King Street Industrial Est
Langtoft, Peterborough
Cambs, PE6 9NF
Tel 01778 560650
fax 01778 560724
[email protected]
www.airblast.co.uk