HPE-NS - Marq Packaging Systems

Case Erectors
Case Sealers
Product Settlers
Tray/Bliss Formers
HPE-NS
Case Erector Bottom Sealer With
Bundle Hopper
MARQ Packaging’s Case Erector Bottom Sealer with Bundle Hopper is a design that features added
versatility while maintaining the high standard of quality and performance expected in a MARQ machine.
Its superior style of bundle hopper is easily accessible for adjustments and servicing and reduces the
amount of lifting required by the operator.
This horizontal-feed hopper allows cases to be erected with top and bottom vacuum cups to ensure
positive erecting of the case. Erecting cases in the horizontal position gives you the added benefit of
using opposing vacuum cups to open the case. All flap folding and case handling is done outside the
machine, which means that maintenance and changeover is accomplished easily without interference.
Multiple stacks of knockdown cases can be placed onto the hopper where they will automatically feed
into the machine. A bottom flight lug chain and one upper flight lug chain convey the case through
the erector. MARQ case erectors/sealers are available in standard, medium and large frame models
depending on customer application.
Talk to a MARQ representative to see why this machine could work best for your application.
Case Erectors
Case Sealers
Top & Bottom Vacuum Cups
Product Settlers
Tray/Bliss Formers
Bundle Hopper
• Secure and open knockdown
case
• Consistently opens each case
squarely
Touch Screen
• Allows placement of several
stacks of knockdown cases
• Ergonomically friendly
• Helps make changeovers
adjustments quick and easy
an
Machi n e S p e c i f i c a t i o n s
Machine Features
Operating Conditions
Use in dry, relatively clean environment at 40°F to
120°F (5°C to 49°C) with clean, dry boxes.
Heavy Duty Construction
•Frame is 3/16” steel construction
•KEYKOTE 36 (Plated Parts)
•Designed for 24/7 Operation
•Standard, medium and large frames available
•Polycarbonate guarding package
(Custom design requests also available)
Power Requirements
Electrical:
230V 3 Phase
Pneumatics: 80PSIG (6.5 BAR gauge pressure),
60 CFM Max at maximum cycle rate
Operating Rate
Up to 40 cases per minute depending on the case
length.
Case Specification
175 to 275 P.S.I. test, single wall A, B, C flute
Outboard Tape Head
•Easy tape roll replacement
Case R a n g e
Formed Case
Length
Width
Height
10.00” min
8.00” min
6.00” min
Knockdown Size
Length
18.00” min
Width
12.00” min
Flexible/Fully Automatic/ Versatile
•Erects and seals a wide range of cases
•Flaps can be sealed with glue, tape or a
combination of both
•Top and bottom flight lugs guide the cases
•Right-Hand or Left-Hand controls are available
•Available Tape heads: 3M, Bemis, Intertape,
central & Dekka
•Available glue units: Nordson, ITW
20.00” max
19.00” max
15.00” max
Components Available Locally
•Allen Bradley, Square-D, Numatics, Festo, Ross,
Direct Logic & Banner
TOP RAIL
HANDWHEEL ADJ.
MOTORIZED TOP SECTION
BOTTOM FLIGHT BAR
HANDWHEEL ADJ.
35.00” max
37.00” max
80 3/4" HOPPER
71 3/8" MACHINE
MAIN AIR
R23 3/8"
MAIN ARCH
LEFT RAIL
HANDWHEEL ADJ.
LEFT BLANK GUIDE
52 3/8"
11"
52 3/8"
20"
TAPE HEAD
21 13/16"
CONSTANT EDGE
STACK LOAD AREA
15"
CHAIN RUNNER
R32"
RIGHT BLANK GUIDE
RIGHT RAIL
HANDWHEEL ADJ.
R36"
MAIN ELECTRICAL
(DIRECT LOGIC PLC)
LIGHT STACK BEACON
(OPTIONAL)
* Machine should not be washed down or subjected to conditions causing moisture
condensation on the components.
28"
TOP MAJOR
FLAP FOLDER
TOP SECTION
INFEED BELT ASSEMBLY
FUNNEL DROP
CASE TURNER
(OPTIONAL)
VACUUM CUP TRANSFER ASSEMBLY
(TRANSFERS TOP BLANK INTO ERECTOR)
HOPPER SUPPORT FRAME
* Optional stainless steel construction with NEMA 4 for washdown environments is
38"
MARQ STD
GUARDING
available.
* Each machine is designed and based on the customer’s application and case
size.
* Machines are also available if the case is above or below the stated minimum or
maximum. Please call factory for specfics.
24" STACK
24" CONV.
HEIGHT
11 1/2"-17 3/4"
BLANK SUPPORT &
HORIZONTAL TRANSFER CHAIN
(PLACED 24" STACK OF BLANKS
IN POSITION FOR TRANSFER
INTO CASE ERECTOR.)
40 1/2"46 3/4"
ADJ. DECK
HEIGHT
GEN 3 HOPPER
100 3/8"
DIRECTION OF FLOW
CUSTOMER
CONVERYOR