doce13 CD-853USMPBT - produktinfo.conrad.com
download 
Report Transcription
e13 CD-853USMPBT - produktinfo.conrad.com
Car Stereo Compact Disc CD/CD-R/CD-RW/ MP3 Player with PLL FM Stereo Radio Radio Data System with PTY USB Port and SD/MMC Card Input Built-in Bluetooth Connecton for Handsfree Calling with Bluetooth Mobile Phone Filp Down/Detachable Front Panel System CD-853USMPBT is a registered Trademark of Roadstar S.A. - Switzerland All right reserved e 13 02 3030 English WARNINGS The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit. To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside the unit. Refer all servicing to qualified personnel. Invisible laser radiation when the unit is opened or interlocks defeated. Avoid exposure to laser beam. Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. This unit must not be exposed to moisture or rain. This unit should be positioned so that it is properly ventilated. Do not expose this unit to direct sunlight or heat radiating sources. 853USMPBT(eng).indd 1 12.7.2006 17:41:32 English CD-853USMPBT Car Stereo Compact Disc CD/CD-R/CD-RW/MP3 Player with PLL FM Stereo Radio Radio Data System with PTY USB Port and SD/MMC Card Input Built-in Bluetooth Connecton for Handsfree Calling with Bluetooth Mobile Phone Flip Down/Detachable Front Panel System INSTRUCTION MANUAL Please read this instruction manual carefully and familiarize yourself with your new Radio CD before using it for the first time. Please retain this manual for future reference. TABLE OF CONTENTS • Location of Controls • Features • Installation • Precautions and Maintenance • Operating Instructions • Specifications LOCATIONS OF CONTROLS 1. POWER ON/OFF ( ) 2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / TA SEEK/MASK DPI/RETUNE/AUDIO DSP/LOUDNESS/ESP/CD MULTI/BEEP/SEEK/STEREO/LOCAL (SEL) 3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER 4. PRESET STATIONS (1,2,3,4,5,6) 5. ‘AF’ function (ALTERNATIVE FREQUENCIES) 6. ‘TA’ function (TRAFFIC ANNOUNCEMENT) 7. ‘PTY’ function (PROGRAM TYPE) 8. DISPLAY BUTTON (DSP) 9. MODE BUTTON (MD) 10.BAND BUTTON (BAND) 11.AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN / CD TRACK/SEARCH BUTTON 12.AUTO SEEK SEARCH TUNING (A/PS) 13.‘SCAN’ AUTOMATIC TUNING CONTROL (SCN) 14.LCD DISPLAY 15.PANEL RELEASE BUTTON ( ) 16.CD SLOT 17.CD EJECT BUTTON ( ) 18.PAUSE BUTTON 19.INTRO BUTTON (Preview all Tracks) 20.REPEAT BUTTON ‘RPT’ 21.RANDOM BUTTON ‘RDM’ 22, 23. + 10 TRACK SEARCH UP/DOWN 24.RESET BUTTON 25.USB PORT 26.MULTI-MEDIA CARD (MMC) / SD CARD SLOT 853USMPBT(eng).indd 2 12.7.2006 17:41:34 English FEATURES The unit features a detachable front control panel, FM/FM stereo, CD/MP3 player the following features: • The best stations memory automatically memorizes the best (strongest) station in the order of their strength (AS). • Electronic Volume, Bass, Treble, Fader and Balance control. • Precision electronic tuning with phase-lock loop (P.L.L.) circuitry. • Programmable 18 preset memory tuning (6 each for FM1/ FM2 / FM3) • Loudness control • Manual / Auto (Seek) / up and down tuning control • Band selector for FM1/ FM2 / FM3 • Display control (Frequency, Station Name, Program Type, Clock) • Clock Function in RDS • CD Repeat Function • CD and MP3 files on CD/CD-R/CD-RW player function • Preamplified Line-out • Detachable front panel protects against theft • Lighting system • USB Port and SD/MMC Input • Built-in Bluetooth Connecton for Handsfree Calling with Bluetooth Mobile Phone • RDS Function: PI (Program Identification) TA (Traffic Announcement) PS (Program Service Name) PTY (Program Type) AF (List of Alternative Frequencies) TP (Traffic Program) INSTALLATION PRECAUTIONS • Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. • Use only the supplied mounting hardware for a safe and secure installation. • Be sure to remove the front panel before installing the unit. Mounting angle adjustment Adjust the mounting angle to less than 20°. MOUNTING EXAMPLE Installation in the dashboard Release screw and bracket TAP 182mm 53mm Bend these claws, if necessary Note: Keep the release key in the safe place as you may need it in future to remove the unit from the car. 853USMPBT(eng).indd 3 12.7.2006 17:41:38 English Detaching and attaching the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen. FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL Before detaching the front panel, be sure to press the PWR button (1) OFF first. Then press the REL button (15), let the Front Panel arrive in horizontal position and detach the panel by pulling it towards you as illustrated. not exceed 10° 1 2 Notes: • Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing it lightly against the unit. • When you carry the front panel with you, put it in the supplied front panel case. • Do not press hard or give excessive pressure to the display window of the front panel when attaching it to the unit. ISO CONNECTOR RCA Jack Line Out (Rear) : Red (right) : White (left) Line In : Red (right) : White (left) 1 3 5 7 CONNECTOR A B 1. 2 4 6 8 2. 3. 4. MEMORY +12V 5 7 5. AUTO ANTENNA OUTPUT 6. 4 8 A 7. +12V (TO IGNITION KEY) 8. GROUND Note: (connector A no. 7) must be connected by car ignition key in order to avoid that car battery becomes weak when the car will be not used for long period. 853USMPBT(eng).indd 4 12.7.2006 17:41:41 English CONNECTOR B 1. REAR RIGHT SPEAKER (+) 2. REAR RIGHT SPEAKER (-) 3. FRONT RIGHT SPEAKER (+) 4. FRONT RIGHT SPEAKER (-) 5. FRONT LEFT SPEAKER (+) 6. FRONT LEFT SPEAKER (-) 7. REAR LEFT SPEAKER (+) 8. REAR LEFT SPEAKER (-) Maintenance FUSE REPLACEMENT If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the replacement, there may be an internal malfunction. In this case, consult your nearest repairing center. Warning Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage. OPERATING INSTRUCTIONS 1. POWER ON/OFF By pressing this key, the unit is switched on and off. This unit is turned on by pressing any key. 2. SELECT 3. VOLUME UP/DOWN Rotating these knob, you can adjust VOL/BASS/TREB/BAL/FAD. To select other functions, press the SEL (2) button shortly until the desired functions is shown on the display. Figure 1 shows how control functions are selected using the SEL button. 1 2 3 2 2 4 5 2 6 2 Fig. 1 Selection of sound control functions 1. VOL or Increase or decrease the volme by the BASS, TREBLE, BALANCE and FADER. TA SEEK/TA ALARM (2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function. VOL VOL VOL VOL or . TA SEEK Mode or TA ALARM mode is selected by 2. SEL 3. BAS 4. TRE 5. BAL VOL VOL VOL VOL 2 sec. SEL 2 sec. SEL 2 sec. SEL TA SEEK VOL . These buttons can be used to adjust TA SEEK / TA ALARM TA SEEK SEL MASK DPI TA SEEK SEL MASK DPI 853USMPBT(eng).indd 5 6. FAD VOL SEL MASK DPI / MASK ALL RETUNE VOL RETUNE L / RETUNE S 12.7.2006 17:41:46 English - TA SEEK mode: When newly turned station does not receive TP information for 5 sec., the radio retunes to next station which has not the same station (PI) as the last station, but has the TP information. In TA seek mode, the current station can be changed to the completely different station because the unit searches TP station when the field strength of the current station is very weak, or the current station has no TP signal. - TA ALARM mode: Any automatic retune mode is not activated, just can hear Beep sound. 2 sec. MASK DPI (2) TA SEEK TA SEEKfor / TAmore ALARM than 2 seconds, it is activated as selecting mode of SEL When press the SEL button these function. VOL 2 sec. SEL TA SEEK SEL MASK DPI VOL MASK DPI / MASK ALL 2 sec. MASK DPI: masked only the AF which has different PI. TA SEEK MASK DPI has RETUNE RETUNE / RETUNEwith S SEL SELthe AF SEL different MASK ALL: masked which PI and NO RDSL signal field strength. VOL RETUNE / S CONTROLS TAL SEEK TA SEEK(2) / TA ALARM 2SEL sec. TA SEEK MASKfor DPI more DSP ON SEL SEL button SEL When press the SEL 2 seconds, it is activated as selecting Retune SELthanRETUNE mode. 22 sec. sec. VOL TA SEEK TA SEEK TAFLAT ALARM SEL TAL: SEEK MASK DPI MASK DPI / MASK ALL SEL POP SEL RETUNE 90 seconds as the time of automatic TA search. M ---Select ROCK M --- CLASS M/--M --- initial DSP OFF RETUNE S: Select 30 seconds as initial time. VOL 2 sec. sec. 22 sec. sec. 22 sec. SEL SEL SEL SEL TA SEEK TA SEEK SEEK TA SEEK TA 2 sec. VOL MASK DPI DPI / MASKVOL ALL RETUNE SEL TA MASK SEL SEEK /DPI TA ALARM SEL SEL RETUNE RETUNE DSP L / RETUNE S SEL MASK VOL 2 sec. AUDIO DSP (2) 2 sec. SEL LOUD CONTROLS ON/OFF TA MASK RETUNE RETUNE L / RETUNE S SEL SEL SEL MASK VOL TA SEEK SEEK MASK DPI DPI DPI / MASK ALL SEL SEL TA SEEK MASK DPI DSP ON as selecting mode of SEL SEL RETUNE When press the SEL button for moreSEL than 2 seconds,SEL it is activated these function. 2 sec. sec. 22VOL sec. VOL VOL VOL VOL SEL SEL SEL TA M SEEK MASK RETUNE SEL POP --- ROCKSEL M --- CLASS M DPI ----- DSP RETUNE OFF TA SEEK SEEK MASK DPIFLAT M SEL SEL TA MASK DPI SEL RETUNE SEL 2 sec. SEL 2VOL sec. SEL SEL VOL ESP / ESP SEL ESP LOUD POP --- ROCK M --- CLASS M --FLAT M --- DSP OFF TAM SEEK MASK DPI SEL RETUNE SEL TA SEEK MASK DPI SEL RETUNE SEL 2 sec. 2 sec. SEL DSP / RETUNE S DSPLON SEL RETUNE VOL SEL SEL DSP DSP ON LOUDNESS CONTROLS (2) DPI VOL TA SEEK MASK SEL SEL ON/OFF SEL RETUNE DSP SEL SEL LOUD VOL TA SEEK MASK DPI SEL SEL DSP SEL POP M ---the ROCK M ---button CLASS Mfor --- FLAT M --DSP RETUNE OFF When press SEL more than 2 seconds,SEL it is activated as selecting mode of these function. CD MULTI ON/OFF MULTI SEL SEL SEL ESP LOUD 2 sec. 2 sec. SEL SEL SEL LOUD TA SEEK TA SEEK SEL SEL SEL SEL TA SEEK LOUD TA SEEK LOUD SEL LOUD 2 sec. 2 sec. VOL SEL SEL VOL ON/OFF MASK DPI MASK DPI RETUNE RETUNE SEL SEL DSP DSP MASK DPI VOL SEL SEL RETUNE ESP / RETUNE ESP SEL ESP DPI MASK SEL ON/OFF SEL SEL SEL DSP DSP SEL SEL VOL SEL ESP MULTI VOL VOL SEL SEL VOL VOL BEEP VOL ON/OFF 2 sec. sec. LOUD ON/OFF mode selected byESP / ESPor 2 SEL is ESP SEL LOUD TA SEEK SEEK MASK DPI DPI SELbe boosted. SEL RETUNE SEL TA MASK SEL SEL RETUNE SEL will 2 sec. VOL CDSEL MULTI ON/OFF MULTI SELSEL SEL ESP LOUD ESP (2) SEL TA SEEK MASK SEL SEL DSP ESP / RETUNE ESP SEL SEL MODE ESP DPI VOL LOUD When press the SEL button for more than 2 seconds, it is activated as 12 sec. or 45 sec. MULTI BEEP SEL SEL SEL SEL ESP LOUD 2 sec. for CD ofLOUD ESP mode can ESP be selected. CD MULTI ON/OFF MULTI SEL SEL SEL 2 sec. VOL key. The bass and treble response SEL SEL DSP DSP SEL DSP SEL SEL DSP DSP 2SEL sec. TA SEEK SEL MASK DPI SEL RETUNE SEL SEL SEL TA SEEK TA SEEK SEEK MASK DPI SEL MASK DPI SEL SEEK / SEEK SEL SEL RETUNE RETUNE SEL SEL SEL TA SEEK LOUD LOUD SEL SEL SEL VOL MASK BEEP ON/OFF RETUNE DSP SEL CDSEL ESP DPI SELSEL MULTI VOL MULTI ON/OFF MULTI SEL ESP SEL 2 sec. sec. SEL 2 SEL SEL SEL TA SEEK LOUD TA SEEK SEEK TA LOUD SEL SEL SEL SEL SEL MASK DPI RETUNE SEL MULTI SEL SEL ESP MASK DPI DPI RETUNE SEL MASK RETUNE SEL MULTI SEL SEL ESP SEL BEEP SEL SEL BEEP DSP SEL SEL SEL TA SEEK LOUD LOUD SEL SEL SEL MASK RETUNE SEL ESP MULTI SELSEL MULTI SEL ESP DPI SEL SEL BEEP BEEP DSP VOL 2 sec. 2 sec. 2 sec. 853USMPBT(eng).indd 6 VOL VOL VOL DSP DSP ON/OFF ON/OFF 12.7.2006 17:41:49 SEL SEL VOL 2 sec. sec. 2 2SEL sec. SEL SEL 2 sec. 2 sec. SEL VOL SEL SEL 2 sec. 2 sec. SEL 22 sec. sec. SEL SEL SEL 2 sec. SEL SEL VOL SEL 2 sec. 2 sec. VOL TA MASK/DPI RETUNE SEL TA SEEK SEL TA SEEK SEEK TA ALARM POP M --- ROCK M --- CLASS M --- FLAT M --- DSP OFF TA SEEK SEEK TA TA SEEK SEL SEL SEL MASK DPI DPI MASK MASK DPI DPI / MASK ALL SEL RETUNE SEL MASK SEL RETUNE SEL VOL VOL TA SEEK TA SEEK / TA ALARM POP M --- ROCK SEL M --- CLASS M --FLAT M --- DSP RETUNE OFF TA SEEK MASK DPI SEL VOL LOUD ON/OFF TA SEEK TA SEEK TA TA SEEK SEEK SEL SEL SEL SEL RETUNE L / RETUNE S VOL MASK DPI MASK DPI MASK MASK DPI DPI VOL SEL SEL SEL DSP ON DSP MASK DPI / MASK ALL SEL RETUNE SEL RETUNE SEL RETUNE VOL LOUD TA SEEK MASK DPI VOL SEL RETUNE SEL ON/OFF ESPM --- FLAT MESP LOUD POP M --- ROCKSEL M --- CLASS --- DSP/ ESP OFF VOL English RETUNE L / RETUNE S VOL DSP DSP DSP ON RETUNE L / RETUNE S TA SEEK sec. for TA SEEK /120 TA ALARM SEL 2 sec. Note:12 sec./45 CD, sec. for MP3 automatically works. sec. 22 sec. TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL 2 sec. MULTI CD SECTION MODE (2) VOL ESP / ESP TA SEEK MASK MASK / MASK ALL SEL SEL SEL SEL ESP DPI LOUD When SEL more than 2 DPI seconds, it is activated as selecting mode of POP M ---the ROCK M ---button CLASS --- FLAT DSP OFF VOL SEL press LOUD ON/OFF CD MULTI ON/OFF MULTI SEL SELM --SEL ESPMfor LOUD these function. SEL SEL SEL VOL 22sec. sec. 222sec. sec. sec. SEL TA TASEEK SEEK TA TASEEK SEEK 2SEL sec. LOUD LOUD LOUD LOUD TA SEEK SEL SEL SEL SEL SEEK TA SEEK LOUD TA TASEEK SEEK 2 sec. 2SEL sec. LOUD LOUD TA SEEK LOUD TA SEEK MASK MASKDPI DPI MASK MASKDPI DPI SEL SEL SEL SEL RETUNE RETUNE RETUNE RETUNE VOL MULTI SEL ON/OFF SEL ESP MULTI SEL SEL ESP SEL ESP /RETUNE ESP SEL ESP DPI VOL MASK SEL SEL SELRETUNE DSPL / RETUNE S SEL DSP SEL DSP VOL CD MULTI ON/OFF VOL BEEP ON/OFF DSP ON SEL SEL SEL SEL MASK DPI RETUNE RETUNE SEL DSP DSP SEEK / SEEK MASK DPI SEL ON/OFF MASK SEL MASKDPI DPI SEL SEL SEL SEL VOL VOL SEL SEL SEL SEL SEL VOL RETUNE RETUNE RETUNE SEL SEL SEL DSP DSP DSP MULTI BEEP SEL SEL ESP VOL VOL MULTI ON/OFF ESP MASK DPI SEL SEL RETUNE DSP SEL MULTI MULTI BEEP SELSEL SEL CDSEL ESP DPI MASK RETUNE DSP ON/OFF SEEK SEEK / SEEK 2SEL BEEP BEEP sound can from 2sec. sec. ON: MULTIspeaker BEEP the buttons are pressed. SEL when SEL SEL SEL ESP be heard LOUD SEL SEL SEL 2 sec. SEL SEL SEL LOUD TA TASEEK SEEK VOL ESP MASK MASKDPI DPI ESP / ESP RETUNE SEL RETUNE SEL SEL SEL DSP DSP SEEK MODE (2) STEREO/MONO SEEK TA SEEK SELSEL STEREO MASK DPI VOL SEL SEL SEL DSP 2SEL sec. MULTI BEEP ON/OFF SEL SEL SEL SEL ESP LOUD When 2RETUNE seconds, it is activated as selecting mode of MULTI BEEP SEL SEL button SEL than SEL press ESPfor more LOUDthe SEL TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL these function. VOL MULTI BEEP SEL SEL SEL ESP / SEEK MASK DPI SEL SEL MULTI SELSEEK SEL RETUNE DSP VOL CDSEL MULTI ON/OFF SEL ESP DPI MASK SEL RETUNE DSP SEL 2 sec. 2SEL sec. SEL SEL SEL LOUD SEEK TA SEEK LOUD TA SEEK SEL SEL SEL SEL SEL SEEK SEL LOUD SEL LOUD TASEEK SEEK SEL TA SEL SEL SEL SEL SEL SEL LOCAL SEL STEREO SELSEL SEEK TA SEEK VOL MASK DPI RETUNE SEEK / SEEK SEL SEL MULTI SEL SELSEEKESP ESP LOUD MULTI SEL SEL SEL LOUD VOL VOL STEREO STEREO/MONO MULTI SEL SEL ESP SEL SEL ESP MASKDPI DPI RETUNE SELMULTI MASK RETUNE SEL VOL BEEP BEEP SEL SEL DSP DSP LOCAL/DX SEL DSP BEEP VOL BEEP ON/OFF 2SEL sec. When SEEK AUTO SCAN is stopped when station is SEEK 1:SEEK MULTI BEEP SELSEEK SEL 1 mode SEL ESP is activated, LOUD STEREO SEL STEREO/MONO 2SEL sec. TA SEEK user MASKSEEK DPI SEL SEL SEL RETUNE DSP SEL detected even still push button. TA SEEK MASK DPI SEL SEL SEL RETUNE DSP SEL VOL SEEK 2: Auto SEEK SCAN is not stopped even station is detected if user push SEEK butLOCAL LOCAL/DX SEL STEREO SEL SEEK SEL 2 sec. ton. release this SEEK stop when station is detected. MULTI BEEP SEL SEL SEL then SEL When ESP button, LOUD TA SEEK MASK DPI VOL SEL SEL LOUD ESP SEL SEL SELMULTIRETUNE SEL BEEP DSP STEREO/MONO (2) STEREO SEL STEREO/MONO SEEK SEL MULTI BEEP SEL SEEK SELSEEK ESP SEL SEL LOUD / SEEK SEL When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function. 2 sec. VOL VOL 2SEL sec. SEL SEL SEEK TA SEEK SEEK TA SEL SEL LOUD LOUD SEL SEL DSP DSP ON DSP VOL SEL SEL SEL SEL SEL VOL VOL TA SEEK 2SEL 2sec. sec. SEL SEL SEL SEL 2 sec. SEL SEL SEL SEL RETUNE RETUNE RETUNE VOL 2sec. sec. 2SEL SEL SEL SEL VOL BEEP MODE 2SEL sec. MULTI BEEP ON/OFF SEL SEL ESP LOUD (2) SEL ESP / ESP SEL CDBEEP SEL SEL ESP LOUD MULTI SEL SEL SEL ESP LOUD ON/OFF MULTI SEL SELSEL SEL press ESPfor LOUD TA SEEK MASK DPImore SEL SEL button RETUNE DSP When the SEL than 2 seconds,SEL itMULTI is activated as selecting mode of these 2 sec. function. SEL SEL SEL MASK MASKDPI DPI MASK DPI CD 2 sec.MULTI ON/OFF mode is selected by “VOL knob”. CD MULTI ON: Read multi section 22 sec. sec. 2 sec.CD MULTI TAMSEEK MASK DPI SEL SEL SEL RETUNE DSP SEL CD. OFF: first section only. POP --- ROCK M ---Read CLASS M --FLAT M --- DSP OFF TA MASK SEL SEL SEL RETUNE DSP SEL TA SEEK SEEK MASK DPI DPI SEL SEL SEL VOL SEL SEL SEL VOL SEL SEL SEL SEL VOL TA TASEEK SEEK TA SEEK SEEK SEEK SEL SEL SEL SEL SEL SEL SEL VOL LOCAL SEL STEREO MASK DPI DPI RETUNE SEL MASK RETUNE SEL ESP ESP STEREO STEREO MULTI MULTI SEL SEL SEL SEL VOL LOCAL SEL STEREO/MONO VOL LOCAL/DX SEL DSP SEL DSP BEEP BEEP LOCAL/DX When 2 sec. FM stations are weak and are disturbed, listening can be improved by selecting MONO. SEL TA SEEK SEL LOUD 853USMPBT(eng).indd 7 SEL SEL MASK DPI ESP SEL SEL RETUNE MULTI SEL SEL BEEP DSP 12.7.2006 17:41:54 SEL 2 sec. SEEK / SEEK VOL English SEL TA SEEK SEL LOUD SEL SEL MASK DPI ESP SEL RETUNE MULTI SEL SEL SEL DSP BEEP LOCAL/DX (2) VOL STEREO SEL button STEREO/MONO SEEKthe SEL SEL press When for more than 2 seconds, it is activated as selecting mode of these function. 2 sec. SEL TA SEEK SEL LOUD SEL SEEK SEEK SEL SEL SEL MASK DPI ESP STEREO SEL SEL SEL RETUNE MULTI LOCAL SEL VOL SEL DSP BEEP LOCAL/DX “Local” position in areas with strong signals to let radio stop at only strong stations during manual tuning (LOC appears). Press to Distant position in areas with weak signals to listen to all stations. 4. PRESET STATIONS (1,2,3,4,5,6) (A) RADIO MODE: When pressed short, these keys select a preset station directly. When pressed longer than 1 sec., current station is stored in preset memory bank. When PTY mode is selected, the PTY switch is shared as follows: PTY music group ---- PTY speech group ---- OFF MUSIC SPEECH 1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO 2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA 3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED 4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN 5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN 6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT (B) CD/MP3 PLAYER MODE: 1. PAUSE 2. INT 3. RPT 4. RDM USING THE RDS FUNCTION What is RDS? The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden. Test transmissions are being conducted in many other european countries. It is expected that RDS will be available in most western european countries in the near future. 5. ‘AF/REG’ function (ALTERNATIVE FREQUENCIES) When pressed short, AF/REG switching mode is selected. When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time. When pressed long, it is activated as regional mode ON/OFF. – Regional mode ON: AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG segment is turned on, in LCD display. – Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. 853USMPBT(eng).indd 8 12.7.2006 17:41:56 English 6. ‘TA’ function (TRAFFIC ANNOUNCEMENT) When pressed short, it is activated as TA mode on or off When TA mode is on and traffic announcement is transmitted – When the unit is it CD/MP3 mode, it will switch to radiomode temporarily. – If the volume level was under the threshold point, it will be raised to the threshold point. – When TP station is received, TP segment is turned on in LCD display. 7. ‘PTY’ function (PROGRAM TYPE) PTY MUSIC ---- PTY SPEECH ---- PTY OFF While selecting PTY type, its selection is implemented by preset buttons as described in preset key. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. 8. DISPLAY (DSP) When this key is pressed, it is operated as the conversion of each display mode as follow. 1) In case of receiving RDS station. RADIO MODE PS ---- CT ---- FREQ ---- PTY CD/MP3 PLAYER MODE CDP ---- CT ---- PS ---- FREQ ---- PTY 2) In case of receiving NON RDS station RADIO MODE FREQ ---- CLOCK ----NO PTY CD/MP3 PLAYER MODE CDP ---- FREQ ---- CLOCK ---- NO PTY Each display time is several seconds, and come back to 1’st position after several seconds. Notes: • CT = clock time • FREQ = frequency • CDP = CD player 9. MODE BUTTON (MD) By pressing this key, user can select. AUX/TUNER/CD-MP3/USB or MMC/SD mode. 10.BAND BUTTON (BAND) Each band is toggled cyclically by pressing this key FM1---FM2---FM3. 11.AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN ) (A) RADIO MODE When pressed short, these keys are operated as MANUAL tuning mode. When pressed longer than 1 sec., they are operated as SEEK tuning mode. (B) CD/MP3 PLAYER MODE When pressed short, they are operated as TRACK UP or TRACK DOWN mode. When pressed longer than 1 sec., they are operated as CUE or REVIEW mode. 12.AUTO SEEK SEARCH TUNING (A/PS) By pressing shortly, the radio searches for each preset station. When field strength level is bigger than the threshold level of stop level, the radio is holding at that preset number for 5 sec. with releasing mute, and then searches again. By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding preset number. When AS operation is finished, the radio executes the preset scan. 853USMPBT(eng).indd 9 12.7.2006 17:41:56 10 English 13.‘SCAN’ AUTOMATIC TUNING CONTROL (SCN) This key is operated as RADIO SCAN The operation is similar as normal search but different thing is holding 5 seconds on every station detected in RADIO SCAN mode. 14.LCD DISPLAY The Liquid Crystal Display will display the current state of the unit. 15.OPEN FRONT PANEL BUTTON Press button and the front panel will be open. CD CONTROL LOCATION OF PARTS 11.TRACK/SEARCH BUTTON FORWARD AND REVERSE TRACK SEARCH (or changing songs) Press the SKIP button ( or ) during play to go to the desired track(song). ....REVERSE ....FORWARD Press and hold the SKIP button ( or ) during play to scan the disc at high speed. When the desired music section of the disc is found, release the button. Normal play will resume. 16.CD SLOT 17.CD EJECT BUTTON Press the EJECT button to remove the CD. 18.PAUSE BUTTON During “PLAY”, press (18) ‘PAU’ button to “PAUSE”. Press it again to resume play. 19.INTRO BUTTON (Preview all Tracks) When this button is pressed, ‘INT ON’ indication is displayed and the first several seconds of each track of the disc are played. Press again to stop intro and listen to track. 20.REPEAT BUTTON ‘RPT’ When this button is pressed, ‘RPT ON’ indication is displayed and play of the selected track will be continually repeated until the Track repeat mode is cancelled by pressing ‘RPT’ button again. 21.RANDOM BUTTON ‘RDM’ When this button is pressed, ‘RDM ON’ indication is displayed and each track of the disc are played in random instead of normal progression. To cancel RANDOM mode, press ‘RDM’ button (21) again. 22, 23. 10 TRACK UP/DOWN SELECT: (In case of MP3 files) M5: 10 Track down / M6: 10 Track up HOW TO SELECT MP3 FILES 1. Searching Track: • Press “A/PS”, then searching track is activated. • Press “SEL”, then the first digit is blinking. • With “VOL select first digit you want. VOL VOL / VOL VOL ” knob, VOL 853USMPBT(eng).indd 10 12.7.2006 17:41:57 English 11 2. 3. • Press “SEL”, then the first digit is fixed and second digit is blinking. • With “VOL select 2’nd 3’rd respectively. VOL ” knob, VOL VOL VOL / VOL • Then automatically the song you selected will start. Searching File Name: • Press “A/PS” twice, then file search is activated. • Press “SEL”, then the first directory is displayed. VOL ” knob, VOL • With “VOL you can select the directory you want. VOL VOL / VOL • Press “SEL” again, then the directory is fixed and the first file name is displayed. • With “VOL you can select the file you want. VOL ” knob, VOL VOL VOL / VOL • Press “SEL”, then the song you selected will start. Searching Character: • Press “A/PS” 3 times, then character search mode is activated. • Press “SEL” button, then “A” character is displayed. VOL VOL / VOL • With “VOL you can select the letter you want. VOL ” knob, VOL • Press “SEL” key longer than 2 sec. • The song which has same character you selected is displayed. • With “VOL you can select the song you want. VOL VOL / VOL VOL ” knob, VOL • Press “SEL” key, then the song you selected will start. • • • • RESET Reset button (24) is placed on the housing. The reset button is to be activated for the following reason: Initial installation of the unit when all wiring is completed. All the function button do not operate. Error symbol on the display. Connecting it to Portable MP3 Player 25.USB Port Using USB cable to connect Your Portable MP3 Player. 26.MULTI-MEDIA CARD (MMC) / SD CARD SLOT Support MP3 ID3 format music only. * IMPORTANT INFORMATION: BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS AND THEIR SOMETIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER GUARANTEE THAT ALL DEVICES WILL BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS THAT ARE POSSIBLE IN THEORY WILL ACTUALLY WORK HOW TO USE BLUETOOTH IN YOUR CAR AUDIO 1. You need to connect your mobile phone and car audio by pairing. A.Press (+) button in Bluetooth Remote Box longer than 6 seconds. The LED in Remote Box will blink fast. This mode is Pairing mode stage. Note: To deactivate Pairing, Press (+) again longer than 3 seconds. LED will stop blinking. B.Turn on the Bluetooth connection of the mobile phone. Perform Add Bluetooth device. The mobile will search for any Bluetooth devices within the range. Select “NAME_HF” and enter Passkey: “0000” to connect to the car audio. (Please refer to the instruction manual of your mobile phone for Bluetooth Pairing. Your mobile phone should have Bluetooth function otherwise can not do the pairing). 853USMPBT(eng).indd 11 12.7.2006 17:41:58 English 12 2. After successful pairing, the LED in Bluetooth Remote will blink 1-2 times every 4 sec. This unit is in active mode waiting for incoming call. 3. You can hear ring tone from the car’s speaker if there’s an incoming call. Press TALK button once to receive call. Press TALK button longer than 2 seconds will disconnect the call. 4. You can talk through Bluetooth Remote Mic and listen through car’s speaker and not through your mobile. When talking, the LED in Bluetooth Remote is always on. You can adjust speaker’s volume level using VOL +/- button. 5. To hang up, press TALK button once. Unit switch back to active mode again. 6. In case of phone’s call, the Radio’s Audio automatically goes in Mute and only the Audio from the phone can be heard. The phone’s Audio volume, coming from the speakers, during Bluetooth’s phone conversation, is fixed and can not be adjusted. When the Bluetooth is activated, in case of phone’s call the Volume must not be moved, otherwise the phone’s Audio will be mixed with the radio. In such condition the communication can be disturbed but it is possible to reduce the radio’s interference by decreasing the Volume to the minimum. Here is a listing of current Bluetooth Mobile phones: Brand Model Checked BHF111 Ericsson Ericsson Motorola Motorola Motorola Motorola Nokia Nokia Nokia Nokia Nokia Nokia Nokia Nokia R520m T39 E398 V3 E1000 E680i Y Y Y Y Y Y Brand Panasonic Pantech Model Checked BHF111 SE SE SE SE X70 G800 T68i Z600 T610 T630 Y Y Y Y Y Y 8910 6310i 6600 N-gage 6260 6230 6680 3230 Y Y Y Y Y SE SE SE SE SE Y Y Y SE SiemensSiemens P800 P900 P910i K700i K750i W800i S55 S65 Y Y Y Y Y Y Y Y SPECIFICATIONS CD/MP3 PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response > 60dB > 50 dB (1kHz) 20Hz - 20 kHz TUNER Sensitivity Stereo separation Signal to noise ratio Frequency range Channel step Intermediate frequency 3 µV 30 dB 50 dB 87.5-108 MHz 50 kHz 10.7 MHz LINE-OUT Output Impedance 350mV 10kOhm GENERAL Power Supply Speaker impedance Output power 13.8V DC (10.8-15.6V allowable) 4 or 8 ohm 40W x 4CH Note: Specifications and the design are subject to possible modification without notice due to improvement. 853USMPBT(eng).indd 12 12.7.2006 17:41:59 INDEX English Page 1 Deutsch Seite 13 Français Page 25 Italiano Pagina 37 Español Página 49 Portugues Pagina 61 • Your new unit was manufactured and assembled under strict ROADSTAR quality control. Thank-you for purchasing our product for your music enjoyment. Before operating the unit, please read this instruction manual carefully. Keep it also handy for further future references. • Il vostro nuovo apparecchio è stato prodotto ed assemblato sotto lo stretto controllo di qualità ROADSTAR. Vi ringraziamo di aver acquistato un nostro prodotto per il vostro piacere d’ascolto. Prima di procedere all’utilizzo dell’apparecchio, leggete attentamente il manuale d’istruzioni e tenetelo sempre a portata di mano per futuri riferimenti. • Ihr neues Gerät wurde unter Beachtung der strengen ROADSTAR-Qualitätsvorschriften gefertigt. Wir danken Ihnen für den Kauf unseres Produktes und wünschen Ihnen optimalen Hörgenuss. Bitte lesen Sie diese Bedienungsanleitung durch, und heben Sie sie auf, um jederzeit darin nachschlagen zu können. • Vuestro nuevo sistema ha sido construido según las normas estrictas de control de calidad ROADSTAR. Le felicitamos y le damos las gracias por su elección de este aparado. Por favor leer el manual antes de poner en funcionamiento el equipo y guardar esta documentación en case de que se necesite nuevamente. • Votre nouvel appareil a été fabriqué et monté en étant soumis aux nombreaux tests ROADSTAR. Nous espérons que cet appareil vous donnera entière satisfaction. Avant de vous adonner à ces activités, veuillez lire attentivement ce manuel d’instructions. Conservezle à portée de main à fin de référence ultérieure. • Seu novo aparelho foi construido e montado sob o estrito controle de qualidade da ROADSTAR. Agradecemos por ter comprado nosso produto para a sua diversão. Antes de usar esta unidade é necessário ler com atençâo este manual de instruçâes pare que possa ser usada apropriadamente; mantenha o manual ao seu alcance para outras informaçâes. 853USMPBT(eng).indd 13 12.7.2006 17:42:00 CD-853USMPBT 11 1 13 8 2 SCN DSP 10 B 14 15 BAND 26 REL H SELECT PUS VO L A/PS 3 CD/MP3CD-R/CD-RW PLAYER 4x40WATTS MD 9 PTY 12 7 TA AF 1 PAU 2 INT 3 RPT 4 RDM 5 6 6 5 18 19 20 21 22 23 25 4 (1-6) 17 16 RESET 24 853USMPBT(eng).indd 14 12.7.2006 17:42:01
