Ball Valves - kitzeurope

The reliable brand
Ball Valves
DIN Full Bore, Floa!ng Ball, 2-piece body
KITZ CORPORATION OF EUROPE S.A.
F14 / F14D
Ball Valves
Floa!ng Ball design
Contents
Pressure - Temperature Rangs
Class PN 16 Cast Iron Ball Valves (F14)
Class PN 10 - 16 - 25 - 40 Carbon Steel Ball Valves (F14D)
Class PN 10 - 16 - 25 - 40 Stainless Steel Ball Valves (F14D)
Actuator Mounng Pad dimensions (F14D)
Applicable standards
KITZ Corporaon Headquarter, Chiba, Japan
KITZ Corporaon of Europe, S.A., Barcelona Plant, Spain
All products introduced in this cataloge are covered by ISO 9001
certification awarded KITZ Corporation of Europe, S.A.
2
3
4
6
8
10
11
Ball Valves, Floang Ball Design
Pressure-Temperature Rangs
The pressure-temperature rangs of ball valves are
determined, not only by valve shell materials, but more
essenally by sealing materials, used for ball seats, gland
packing and gaskets.
Sealing materials may be high molecule, or rubber, but the
choice is limited by the characteriscs of the service fluid,
working temperatures, working pressures, velocity of fluid,
and operaonal frequency of valves.
As it is very difficult to predetermine the exact pressuretemperature rang for all kind of fluids under all imaginable
condions, we have prepared general rang charts for non-shock
fluid service here, based on our past experiences both in the
field and in our laboratory.
In case of extraordinary service condions as menoned
below, contact KITZ Corporaon of Europe or its distributors
for technical advice:
1. Valves shall be le fully closed for a long period of me
under high temperature or high differenal pressure.
2. Valves shall be frequently operated under high temperature
or high differenal pressure.
3. Frequent change of line pressure or temperature.
Virgin PTFE is the standard seat material for F14 and F14D series KITZ ball valves. Specify PTFE + Graphite or PTFE
+ Stainless Steel , PTFE + Glass Filled, etc. when required.
F14 PN10 - 16
F14D PN10 - 16 - 25 - 40
DN 15 ~ 200
DN 15 ~ 300
Body Rang: Pressure resistance limitaon for valve body
3
Ball Valves, Floang Ball Design
F14 - Class PN16 Cast Iron Ball Valves
Full port, Split body, Side entry design
Leak test: BS EN 12266-1 Class A & DIN 3230
Lengths : Distance between flanges as per EN 558-1
DN ≤ 100 basic serie 14
DN ≥ 125 basic serie 15
Page 3 for Pressure-Temperature Ra!ngs
Page 5 for Construc!on and Materials
Features
• An!sta!c device
• Blowout-proof stem
• High performance PTFE ball seats
• Standars: Design: EN ISO 17292 Thickness: ISO 7121
Flanges drilled: EN 1092 Flanges surfaces: EN 1092
Features of PN16 F14
Valve Size
DN
15
20
25
32
40
50
65
80
100
125
150
200
Un: mm
Port
L
X
P
H
12.5
19
25
32
38
51
65
76
102
111
144
190
115
120
125
130
140
150
170
180
190
325
350
400
52
55
58
58
60
60
75
78
95
162
175
200
150
150
150
200
200
250
250
250
500
500
750
-
85
90
104
115
120
132
144
154
212
214
238
Cv
(m³/h)
17
39
63
104
150
254
381
971
1560
2173
4046
Gear
opera!on 8787
Torque
PN16
(N.m)
Weight
(Kg)
5
6
8
15
20
25
40
60
120
150
250
500
1,8
2,8
3,7
6,1
7,5
10,9
15
20
29,7
46,5
73
146 (1)
1 Cv = 1,16 Kv
Gear Opera!on
Class
PN16
Valve Size
(Dn)
100
125
150
200
4
Un: mm
Gear Operator
H
P1
B
A
303
300
300
300
400
282
282
282
340
71
71
71
86
Valve Operator
Dn 15 ∼ 150 : lever opera!on
Dn 100 ∼ 150 : op!onal gear box
Dn 200 : gear box or lever (op!onal)
(1) Gear box included
Worm gear operators may be mounted on KITZ
ball valves at your op!on for the smoothest valve
opera!on. Electric or pneuma!c actuators are also
op!onally available. Contact KITZ distributors for
appropriate choice and sizing of valve actuators.
Ball Valves, Floang Ball Design
Construcon and Materials
Standard
No.
1
4
5
6
7
8
9
11
12
15
16
17
18
21
22
24
25
26
30
31
32
33
34
Parts
PN 16
Body
Body Connector
An!sta!c Stem*1
Gland Ring
Gland Flange
Stop Pin
Stop Plate
Gland Washer
Nut*5
Elas!c Ring
Gland bolt
Bolt - Stud Bolt*5
Nut*5
Ball*2
Ball Seat
Body Seal*4
Gland Packing*3
Stem Seal*3
Handle
Handle head
Handle bar
Handle bar bolt
Handle head bolt
GG25
GG25
ASTM A479 Type 316 / 410
ASTM A479 Type 316
Steel
Steel
Steel zinc plated
Blue Steel
DIN 267/3-8 blued
Steel
Steel
DIN 267/3/4 C8.8/8 blued / zinc plated
¡ Standard material configuraon can be applied to
sour service.
*1 DN ≤ 50
DN > 50
*2 DN ≤ 32
32 < DN ≤ 50
DN > 50
:
:
:
:
:
*3 DN ≤ 25
DN > 25
*4 DN ≤ 25
DN > 25
*5 DN < 40
DN = 40
DN > 40
:
:
:
:
:
:
:
ASTM A479 Type 316
ASTM A479 Type 410
ASTM A479 Type 316
DIN 1.4408
ASTM A217/A743 Gr. CA15
DIN 1.4408 (Op!onal)
PTFE+C+Graphite
PTFE
PTFE
316L+ Flexite®
DIN 267/3 C8.8 blued
DIN 267/3/4 C8.8/8 zinc plated
DIN 267/3 C8.8 blued
DIN 267/3/4 C8.8/8 blued / zinc plated
ASTM A479 Type 316 / 1.4408 / CA15
PTFE
PTFE / 316L+Flexite®
Valve finish
: phosphate and oil dipped.
Operaon group: DN ≤ 150 : by lever. (100 ~150 op!on: gear box)
DN = 200 : by gear box or with lever (Op!onal)
PTFE+C+Graphite / PTFE
PTFE+C+Graphite / PTFE
Steel coated
GGG40
GGG40
Stainless Steel
Stainless Steel
DN ≤ 25
All part numbers are corresponding with those shown in valve assembly drawings.
5
Ball Valves, Floang Ball Design
F14D - Class PN 10 - 16 - 25 - 40 Carbon Steel Ball Valves
Full port, Split body, Side entry design
Features
• An!sta!c device
• Blowout-proof stem
• High performance PTFE ball seats
• Actuator moun!ng pad to ISO 5211
• Standars: Design: EN 1983:2006 Thickness: EN 12516-1
Flanges drilled: EN 1092 Flanges surfaces: EN 1092
Leak test: BS EN 12266-1 Class A & DIN 3230 FSM: BS 6755 P2
Lengths: Distance between flanges as per EN 558-1
DN ≤ 100 basic serie 14 (Short)
DN ≥ 125 basic serie 15 (Short) - Serie 1 (Long)
Page 3 for Pressure-Temperature Ra!ngs
Page 7 for Construc!on and Materials
Page 10 for Dimension of Actuator Moun!ng Pad
Dimensions of PN 10 -16 - 25 - 40 F14D
Valve Size
DN
Port
15
20
25
32
40
50
65
80
100 (1)
125 (2)
150
200
250 (3)
300
14
19
25
32
38
51
65
76
102
111
144
190
241
285
Un: mm
X
P
H
50
52
55
58
60
60
75
78
95
162.5
175
200
225
250
150
150
150
200
200
250
250
250
500
500
750
-
85
90
104
116
118
128
138
148
196
199
223
L
ISO
Cv
5211 (m³/h)
Short Long
115
120
125
130
140
150
170
180
190
325
350
400
450
500
130
150
160
180
200
230
290
310
350
400
480
-
Gear
opera!on
Gear
opera!on
Gear
opera!on
F03
F03
F05
F05
F05
F07
F07
F07
F10
F10
F10
F14
F14
F16
17
39
63
104
150
254
381
971
1560
2173
4046
8787
14452
22893
Torque
(N.m)
Weight
(Kg)
PN10-16
PN16
PN40
Short
5
6
8
15
20
25
40
60
120
150
250
500
1000
1500
8
8
10
20
25
35
50
90
175
220
350
750
1400
2000
2,6
3,3
4,3
6,5
7,8
11,9
15
20
33
46
73
175 (4)
230 (4)
305 (4)
PN25-40
Long
2,8
3,6
4,5
6,7
7,9
12,5
16,1
22,5
39,6
80
-
Short
Long
2,6
3,3
4,3
6,5
7,8
11,9
15,5
21
34,5
47
75,5
185 (4)
250 (4)
370 (4)
2,8
3,6
4,5
6,7
7,9
12,5
16,5
23
40,2
85
-
*1 PN 25-40:
Ball Bore=95
X= 85
H=190
*2 PN 25-40:
P=750
*3 PN 25-40:
H=396
*4 Gear Box
included
1 Cv = 1,16 Kv
Gear Opera!on
Class
Valve Size
(Dn)
6
DN
PN
100
125
16-40
150
200
10-16
250
25-40
300 10-40
Un: mm
Gear Operator
H
P1
B
A
342
378
378
440
300
300
300
400
400
500
500
282
282
282
340
340
365
365
71
71
71
86
86
130
130
Valve Operator
Dn 15 ∼ 150 : lever opera!on
Dn 100 ∼ 150 : op!onal gear box
Dn 200 : gear box or lever (op!onal)
Worm gear operators may be mounted
on KITZ ball valves at your op!on
for the smoothest valve opera!on.
Electric or pneuma!c actuators are
also op!onally available. Contact
KITZ distributors for appropriate
choice and sizing of valve actuators.
Ball Valves, Floang Ball Design
Construcon and Materials
Standard
No.
1
4
5
6
8
9
11
12
17
18
21
22
24
25
26
30
31
32
33
35
36
40
Parts
PN 10 - 16 - 25 - 40
Body
Body Connector
Anstac Stem*1
Gland Ring
Stop Pin
Stop Plate
Gland Washer
Nut
Stud Bolt-Bolt
Nut
Ball*2
Ball Seat
Body Seal*4
Gland Packing*3
Stem Seal*5
Handle
Handle head
Handle bar
Handle bar bolt
Bolt
Washer
Stem O’ring
¡ Standard material configuraon can be applied to
sour service.
DIN 1.0619
DIN 1.0619
ASTM A479 Type 316 / 410
ASTM A479 Type 316
Steel
*1 DN ≤ 50
50 < DN < 250
DN ≥ 250
*2 DN ≤ 50
50 < DN < 250
:
:
:
:
:
DN ≥ 250
*3 DN ≤ 25
DN > 25
Cod. FSM
*4 DN ≤ 25
DN > 25
Cod. FSM
*5 DN ≤ 25
DN > 25
:
:
:
:
:
:
:
:
:
Steel zinc plated
Steel zinc plated
DIN 267/3-8 blued
DIN 267/3/4 C 8.8/8 / zinc plated
DIN 267/3/4 C 8.8/8 / zinc plated
ASTM A479 Type 316/CA15 / DIN 1.4408
PTFE
PTFE / 316L+ Flexite®
ASTM A479 Type 316
ASTM A479 Type 410
ASTM A479 Type 316
ASTM A479 Type 316
ASTM A217/A743 Gr. CA15
DIN 1.4408 (Oponal)
DIN 1.4408
PTFE+C+Graphite
PTFE
Graphite (Oponal)
PTFE
316L+ Flexite®
316L+Graphite (Oponal)
PTFE+C+Graphite
PTFE
PTFE+C+Graphite / PTFE
PTFE+C+Graphite / PTFE
Valve finish
: phosphate and oil dipped.
Steel coated
GGG40
GGG40
Stainless Steel
Operaon group : DN ≤ 150: by lever. (100 ~150 opon: gear box)
DN = 200: by gear box or with lever (Oponal)
DN > 200: by gear box.
Steel
Steel
FKM
DN ≤ 25
All part numbers are corresponding with those shown in valve assembly drawings.
7
Ball Valves, Floang Ball Design
F14D - Class PN 10 - 16 - 25 - 40 Stainless Steel Ball Valves
Full port, Split body, Side entry design
Features
• An!sta!c device
• Blowout-proof stem
• High performance PTFE ball seats
• Actuator moun!ng pad to ISO 5211
• Standars: Design: EN 1983:2006 Thickness: EN 12516-1
Flanges drilled: EN 1092 Flanges surfaces: EN 1092
Leak test: BS EN 12266-1 Class A & DIN 3230 FSM: BS 6755 P2
Lengths: Distance between flanges as per EN 558-1
DN ≤ 100 basic serie 14 (Short)
DN ≥ 125 basic serie 15 (Short) - Serie 1 (Long)
Page 3 for Pressure-Temperature Ra!ngs
Page 9 for Construc!on and Materials
Page 10 for Dimension of Actuator Moun!ng Pad
Dimensions of PN 10-16 - 25 - 40 F14D
Valve Size
DN
Port
15
20
25
32
40
50
65
80
100 (1)
125 (2)
150
200
250 (3)
300
14
19
25
32
38
51
65
76
102
111
144
190
241
285
L
Un: mm
X
P
H
50
52
55
58
60
60
75
78
95
162.5
175
200
225
250
150
150
150
200
200
250
250
250
500
500
750
-
85
90
104
116
118
128
138
148
196
199
223
ISO
Cv
5211 (m³/h)
Short Long
115
120
125
130
140
150
170
180
190
325
350
400
450
500
130
150
160
180
200
230
290
310
350
400
480
-
Gear
opera!on
Gear
opera!on
Gear
opera!on
F03
F03
F05
F05
F05
F07
F07
F07
F10
F10
F10
F14
F14
F16
17
39
63
104
150
254
381
971
1560
2173
4046
8787
14452
22893
Torque
(N.m)
Weight
(Kg)
PN10-16
PN16
PN40
Short
5
6
8
15
20
25
40
60
120
150
250
500
1000
1500
8
8
10
20
25
35
50
90
175
220
350
750
1400
2000
2,6
3,3
4,3
6,5
7,8
11,9
15
20
33
46
73
175 (4)
230 (4)
305 (4)
PN25-40
Long
2,8
3,6
4,5
6,7
7,9
12,5
16,1
22,5
39,6
80
-
Short
Long
2,6
3,3
4,3
6,5
7,8
11,9
15,5
21
34,5
47
75,5
185 (4)
250 (4)
370 (4)
2,8
3,6
4,5
6,7
7,9
12,5
16,5
23
41
85
-
*1 PN 25-40:
Ball Bore=95
X= 85
H=190
*2 PN 25-40:
P=750
*3 PN 25-40:
H=396
*4 Gear Box
included
1 Cv = 1,16 Kv
Gear Opera!on
Class
Valve Size
(Dn)
8
DN
Un: mm
PN
100
125
16-40
150
200
10-16
250
25-40
300 10-40
Gear Operator
H
P1
B
A
342
378
378
440
300
300
300
400
400
500
500
282
282
282
340
340
365
365
71
71
71
86
86
130
130
Valve Operator
Dn 15 ∼ 150 : lever opera!on
Dn 100 ∼ 150 : op!onal gear box
Dn 200 : gear box or lever (op!onal)
Worm gear operators may be mounted
on KITZ ball valves at your op!on
for the smoothest valve opera!on.
Electric or pneuma!c actuators are
also op!onally available. Contact
KITZ distributors for appropriate
choice and sizing of valve actuators.
Ball Valves, Floang Ball Design
Construcon and Materials
Standard
No.
1
4
5
6
8
9
11
12
17
18
21
22
24
25
26
30
31
32
33
35
36
40
Parts
PN 10 - 16 - 25 - 40
Body
Body Connector
Anstac Stem
Gland Ring
Stop Pin
Stop Plate
Gland Washer
Nut
Stud Bolt-Bolt*5
Nut*5
Ball*1
Ball Seat
Body Seal*3
Gland Packing*2
Stem Seal*4
Handle
Handle head
Handle bar
Handle bar bolt
Bolt
Washer
Stem O’ring
DIN 1.4408
DIN 1.4408
ASTM A479 Type 316
ASTM A479 Type 316
DIN 267/11 A2-70
Steel nickel plated
DIN 1.4122 (SS)
DIN 267/11 A2-70
DIN 267/11/ A2-70 / 267/3 zinc plated
DIN 267/11/ A2-70 / 267/3 zinc plated
ASTM A479 Type 316 / 1.4408
PTFE
PTFE / 316L+Flexite®
PTFE+C+Graphite / PTFE
¡ Standard material configuraon can be applied to
sour service.
*1 DN ≤ 32
DN > 32
*2 DN ≤ 25
DN > 25
Cod. FSM
*3 DN ≤ 25
DN > 25
Cod. FSM
*4 DN ≤ 25
DN > 25
*5 PN 10 - 16
DN ≤ 250
DN > 250
PN 25 - 40
DN ≤ 150
DN > 150
:
:
:
:
:
:
:
:
:
:
ASTM A479 Type 316
DIN 1.4408
PTFE+C+Graphite
PTFE
Graphite (Oponal)
PTFE
316L+ Flexite®
316L+Graphite (Oponal)
PTFE+C+Graphite
PTFE
: DIN 267/11 A2-70
: DIN 267/3 C8.8 zinc plated
: DIN 267/11 A2-70
: DIN 267/3 C8.8 zinc plated
PTFE+C+Graphite / PTFE
SS+Plasc
Valve finish
: (SS) Natural.
GGG40
GGG40
Stainless Steel
Stainless Steel
Operaon group: DN ≤ 150: by lever. (100 ~150 opon: gear box)
DN = 200: by gear box or with lever (Oponal)
DN > 200: by gear box.
Stainless Steel
FKM
DN ≤ 25
All part numbers are corresponding with those shown in valve assembly drawings.
9
Ball Valves, Floang Ball Design
F14D - ISO 5211 Top Dimensions
for Class PN 10 - 16 - 25 - 40 Full Port, Split Body, Side Entry Design Ball Valves
Dimensions
F14D
Class
PN
10-16
PN
25-40
Un: mm
Nominal
size
(DN.)
-0.05
-0.10
G
-0.1
-0.2
øE
-0.1
-0.2
øS
± 0.2
øJ
B min.
15
20
25
32
40
50
65
80
100
125
150
6
6
8
9
9
19
19
19
22
22
22
30 GB
14 ACT
30 GB
14 ACT
18
25
25
35
35
35
55
55
55
70
70
70
65
65
90
90
90
125
125
125
36
36
50
50
50
70
70
70
102
102
102
100
175
140
100
175
140
130
210
165
9.5
8
10
14.5
14.5
25.5
25.5
25.5
40.5
40.5
40.5
42 GB
145.5 ACT
42 GB
145.5 ACT
171.5
200
250
300
DN 200/250/300: Dimensions with Gear Box (GB) or Actuator (ACT)
10
C
18
16.5
20.5
29
29
46
46
46
66
66
66
64.5 GB
148.5 ACT
64.5 GB
148.5 ACT
174.50
L
(Short)
M
F
ISO 5211
Flange
Type
thread
115
120
125
130
140
150
170
180
190
325
350
M5
M5
M6
M6
M6
M8
M8
M8
M10
M10
M10
1.5
1.5
2
2
2
3
3
3
3
3
3
F03
F03
F05
F05
F05
F07
F07
F07
F10
F10
F10
400
M16
3
F14
450
M16
3
F14
500
M20
3
F16
Ball Valves, Floang Ball Design
Aplicable standards
Marking
BS 5351 / MSS-SP-25
Coupling Flange
ISO 5211 / DIN 3337
Flanges
DIN 2501 / DIN 2526
Surface finish
MSS-SP-6 / DIN 2526
Set-up Design Standard
BS 5351 / DIN 3357
Quality Assurance
UNE-EN-ISO 9001
Face-to-Face distance
DIN 3202 F1 / F4 / F5
F1 : Long
F4 : ≤ DN100
F5 : ≥ DN125
Fire Safe Standard
BS 6755 P. 2
Tests
BS 6755 P.1 A / DIN 3230 P. 3
Material Specificaon
NACE MR 0175-2000
11
EN-10-612-1
CAUTION
Pressure-temperature ratings and other performance data published in this catalog have been
developed from our design calculation, in-house testing, field reports provided by our customers
and/or published official standards or specifications. They are good only to cover typical applications
as a general guideline to users of KITZ products introduced in this catalog.
For any specific application, users are kindly requested to contact KITZ Corporation of Europe for
technical advice, or to carry out their own study and evaluation for proving suitability of these
products to such an application. Failure to follow this request could result in property damage and/
or personal injury, for which we shall not be liable.
While this catalog has been compiled with the utmost care, we assume no responsibility for errors,
impropriety or inadequacy. Any information provided in this catalog is subject to from time-to-time
change without notice for error rectification, product discontinuation, design modification, new
product introduction or any other cause that KITZ Corporation of Europe considers necessary. This
edition cancels all previous issues.
Kitz Corporation of Europe S.A.
Ramón Viñas, 8
08930 Sant Adrià de Besòs
Barcelona
Spain - España
Ph. +34 93 462 14 08
Fax. +34 93 462 03 49
www.kitzeurope.com