Corn Cob Blast it Clean Flyer Market 6 24 09

CORN COB CLEANING
Corn Cob is versatile,
economical, biodegradable, safe
and creates less dust than sand
or nut shells. Removes top coat
while preserving base and primer
coats.
• Corn Cob blasting media can be used safely around electrical equipment, hydraulic
systems, equipment and bearings without risk of damage or sparking.
• The natural cell structure of Corn Cob makes granules highly absorbent. The substance
removed is done expeditiously and the cleaning process is intensified.
•
Corn Cob media requires no masking, will not frost glass, pit aluminum or damage
sensitive gear and bearing surfaces. This dust-free, non-toxic blast media does not cause
health or environmental hazards.
Stain Removal From Log Home
CORN COB CLEANING REMOVES
RUST, VARNISH, DIRT, DUST, PLASTER, PAINT, TEFLON ADHESIVES,
MOLD, PETROLEUM, OIL, GREASE, MOSS, MARINE GROWTH, CEMENT,
CARBON BUILD-UP, MORTAR, SILICONES AND SMOKE DAMAGE.
SURFACES CLEANED WITH CORN COB
Smoke-Damaged Buildings, Foundry Interiors, Off Road
Equipment, Oil Rigs, Dust Filter Bags Housing, Mining
Equipment, Machinery, Heavy Equipment, Automotive
Parts, Aluminum Molds, Turbines, Fertilizer plants, Motors,
Generators
Grease
Removed
From
Conveyor
Chain
Blast-it-Clean, 7800 East 12th St., Kansas City, Missouri 64126 (816) 241-9199 office, (913) 440-4725 Fax
www.blast-it-cleanw.com
Corn Cob Blast Media
Crushed corncob and corn cob blastings are made from the
woody ring portion of the corncob. This portion of the cob is
separated, dried, ground, air-cleaned, and then classified over
screens of various mesh sizes. They are available in granules
ranging from 1/4” to a fine powder.
Qualities of crushed corncob and corn cob blastings that make
them ideal for pressure blasting include its mild abrasiveness,
absorbency, and resilience to attrition.
Benefits
•
•
•
•
•
•
•
General Properties
A1 USDA approved cleaner in FDA •
regulated facilities
•
Organic based requires no cleanup
•
Releases and contain no free silica’s
•
Nontoxic and non-hazardous
•
Excellent wood restoration media
•
No solvents or caustic chemicals
•
Passed ASTM paint adhesion
•
specification for surface preparation
Paint removed from STUCCO
Appearance
Tan odorless granules
Specific Density
0.8 – 1.2
Solubility in Water
7.4 – 9.5%
pH
7.3
Mohs Hardness
4.5
Hazardous Components No hazardous component
Flash point
350.25F OC 388.25F CC
Work/Hygiene Practices No special requirements
Paint removed from WOOD
Blast-it-Clean, 7800 East 12th St., Kansas City, Missouri 64126 (816) 241-9199 office, (913) 440-4725 Fax
www.blast-it-cleanw.com