magura.com english

Transcription

magura.com english

ENGLISH
61
MAGURA.COM
STATEMENTS
STEfAN EkERold
“I‘ve been riding with MAGURA products for around 6 years and I am especially impressed by your handlebars. They are very
robust, don‘t bend as quickly after falls as other handlebars do and there is a large selection of handlebar shapes, which means
that anyone can find the right shape for them.”
JoN EkERold Team manager of the Bodo Schmidt KTM Junior Team
“As the person responsible for the technical side of the Bodo Schmidt KTM Junior Team, I insist on using the best products for
our motocross motorcycles. This is why we have been relying on the quality and strength of MAGURA MX products for the past
6 years.”
diRNdlER RACiNG
“We are impressed by the performance of the carbon brake pads from MAGURA (for the 750 Supermoto calliper). After a brief warm-up phase, these brake pads always provide exceptional braking
effectiveness! This has advantages, especially with hard braking manoeuvres. Noticeably later
braking points are the result!”
Rok BAGoRoS
MAGURA X-line “CPX”:MAGURA brake calliper:MAGURA radial pump 195:MUST
MARkUS VolZ
(Runner-up in German Supermoto 2011)
”The extremely impressive braking performance of my MAGURA brake enabled me
to brake ‚late‘ and win the second-place title without any technical problems! MAGURA‘s
materials and quality as well as their cooperative spirit are top-tier. MAGURA products
belong on the bikes of hobbyists and fully professional riders alike.”
MR. HAYABUSA ElMAR GEUlEN
“A clear statement – for me there are really no better brake & clutch pumps than your
MAGURA products.”
dAVidE ZiTZEWiTZ BVZ Racing Team
“I have been riding with the MAGURA SX handlebar for years because it has a great
shape and is extremely strong. It really suits my riding style well.”
CHRiS PfEiffER
“About the CPX handlebar I can only say that it has the optimal shape for stunting and trials. But I also have the CPX on my enduro. I‘ve always sworn by a rather “straight” handlebar with little backwards bend. The CPX gives a decisive advantage to all
stunt riders: it has 230 mm of space for a rubber grip, clutch and handbrake. Other handlebars usually have barely 200 mm and
that makes it difficult to accommodate two fittings well. And it‘s also very strong. It‘s my absolute first choice for my enduro
and trials bikes and of course for my stunt bike.
The 195 radial clutch fitting is the optimal handbrake for a stunt bike. Yes, that‘s right, I use it as a handbrake and not as a
clutch. In the 13 mm version it has the optimal transmission and lever mechanics for a snappy handbrake – just what we stunt
riders are looking for.”
2
CoNTENT
Statements
3
2
MAGURA Master Cylinder
Brake Master HC3
Clutch Master HC3
HC3 Features
Delivery Includes
Optional Extras
HC3 Optional and spare parts
ABE Recommended fitment table
195 Radial master cylinder
195 Radial master cylinder | Spare parts
4
6
6
7
7
7
8
11
12
13
MAGURA HYMEC
167 HYMEC Off-Road
167 HYMEC Street
167 HYMEC | Spare parts
HYMEC replacement clutch slave cylinders
Build your own HYMEC
14
16
18
20
22
24
MAGURA Performance Parts for BMW
Replacement levers
BMW Upgrade Parts for R-Models
26
28
29
Handlebars
X-line series
Accessories
30
32
33
Hydraulic master cylinders and
spare parts for brake systems
167 Hydraulic brake and clutch master cylinder
190 Radial master cylinder | Spare parts
163 Hydraulic clutch master cylinder
163 HYMEC
163 HYMEC Spare parts
750 Radial supermoto brake system | Spare parts
770 Radial double-disc brake system | Spare parts
34
36
38
39
40
41
42
43
HYDRAULICS TECHNOLOGY HAVE BEEN THE MOTIVATING
Classics
73 Sport brake lever
73.202 Sport brake dual pull lever
74 Sport clutch lever
101 Clutch lever
103 Brake-/clutch lever with decompression lever
108 Brake lever
12 Decompression lever
225 Hydraulic brake and clutch lever
234 Throttle twist grip with mech. brake
307 Throttle twist grip
309 Throttle twist grip
314 Duo throttle twist grip
317 Electric throttle twist grip
682 2-Gear-shift handle grip
683 3-Gear-shift handle grip
700 Master brake cylinder
44
46
46
46
47
47
47
47
48
48
48
49
49
49
50
50
50
51
51
FORCES DRIVING THE MAGURA BRANd FOR OVER NINE
Accessories
52
DECADES. FOR HIGH PERFORMANCE MOTOR RACING OR
Partners
56
MAGURA HAS EXCELLED AS AN ACKNOWLEDGED OEM
LEADER FOR THE GLOBAL TWO-WHEEL INDUSTRY FOR
OVER 90 YEARS, SETTING STANDARDS IN SAFETY,
COMFORT AND INNOVATION. MAGURA IS A PIONEER IN
THE WORLD OF HYDRAULICS. IT’S NO SURPRISE TO FIND
LONG-ESTABLISHED INTERNATIONAL COMPANIES SUCH
AS BMW, kTM, TRiUMPH, dUCATi AND MANY MORE
TURNING TO MAGURA WHEN IT COMES TO STEERING,
BRAKE AND CLUTCH PRODUCTS. MAGURA HAS BEEN
ON BOARD WITH BMW, FOR EXAMPLE, FROM THEIR VERY
FIRST MACHINE RIGHT THROUGH TO THE PRESENT DAY!
IMPROVED SAFETY AND THE DEVELOPMENT OF INNOVATIVE
EVERYDAY COMFORT – MAGURA MAKES AN IMPORTANT
CONTRIBUTION TO ENSURING THAT SAfETY iS A
ToP PRioRiTY foR CYCliSTS ANd MoToRCYClE
Each major product assembly is identified with a model number and specific 7 digit order code. (Example: Model 73 brake lever, order code 0116934). Always use the 7 digit
order code for ordering, this will assure receiving the correct item. B after the order
code indicates the item is out of production, available only as long as supply lasts.
RidERS.
Pricing delivery and other terms and conditions are those in effect at time of delivery.
3
HCT – HARd CoRE TECHNoloGY – THE NEW PATENTEd
TECHNoloGY fRoM MAGURA iMPRoVES THE fEEdBACk
fRoM YoUR BRAkE SYSTEM. oRiGiNAllY dESiGNEd foR THE RACE TRACk
THE BENEfiTS ARE JUST AS RElEVANT foR PRofESSioNAl ANd HoBBY
RidERS AlikE. THE REdUCEd iNTERNAl fRiCTioN Will offER A CoNNECTEd
fEEl WHiCH iMPRoVES THE PERfoRMANCE of YoUR BRAkES. THE HCT
HYdRAUliC MASTER UTiliSES A SloTTEd PiSToN ANd A STATioNARY
PRiMARY PiSToN SEAl ANd iS APPRoVEd foR USE WiTH All HYdRAUliC
MoToRCYClE BRAkiNG SYSTEMS WiTH oR WiTHoUT ABS. MAGURA HCT
iS THE lATEST AddiTioN To oUR AGE old dESiRE foR iMPRoVEMENTS iN
CoMfoRT, SAfETY ANd RidiNG PlEASURE.
MAGURA RAdiAl MASTER CYliNdER
RADIAL 195
MAGURA.COM
Reachadjust with optional
remote adjuster
AdVANCEd
SEAl TECHNoloGY
Folding Lever Blade
with detent positioner
3 WAY lEVER RATio
Remains fully radial
in all 3 positions
Smoked Glass Reservoir
with Bracket
MACHiNEd
AlUMiNiUM BodY
APPRoVEd BY
MATTiE GRiffiN, RS RACiNG, MARkUS VolZ,
RAPToR RACiNG ANd MEdAZA CYClES.
BRAKE MASTER HC³
oRdER CodE
ModEl
2100299
Brake Master HC3 – Piston diameter
18 mm = 17 to19 mm (fully ABE approved)
2100297
15 mm = 14 to 16 mm (fully ABE approved)
2100298
12 mm = 11 to 13 mm short lever, without ABE
(race version)
CLUTCH MASTER HC³
oRdER CodE
ModEl
2100300
Clutch Master HC3 - Piston diameter
15 mm = 14 to 16 mm (for brake fluid use - DOT)
2100301
Clutch Master HC3 - Piston diameter
12 mm = 11 to 13 mm (for mineral oil use*)
* Suitable for use with BMW and KTM mineral oil clutch activation systems
Suitable for use with MAGURA Hymec applications
6
Machined clamp supplied
with titanium retaining bolts
BillET
Fully ABE approved
Lightweight CNC lever
HC3 fEATURES
Machined aluminium body – this master cylinder body has been produced
from high grade aluminium alloy to ensure a lightweight design combined with
maximum rigidity which has been built to last.
90° Full Radial Design – Pushrod and cylinder at right angle to handlebar
results in decreased friction and more direct brake feeling for improved control.
MAGURA Hard Core Technology (HCT) – The fully patented braking technology
from MAGURA reduces the internal friction within the master cylinder to
improve the feeling at the lever. The slotted piston technology reproduces a
multi primary port master to ensure faster pressure balance in the event of an
“ABS-Kickback”.
Full ABS Compatibility – MAGURA “HCT” is approved for continuous use with
all ABS systems without loss of performance due to pressure compensation
(ABS-Kickback). (Status 2015)
3 Way Lever Ratio – The hand activated master cylinder lever has a clever
3 way adjustable point of support. This mimics the effect of using a piston
size 1 mm below and above the selected hydraulic ratio. Simply remove and
reposition the lever support retaining bolt for a softer or harder pressure point.
All 3 positions offer 90° full radial activation.
Folding Lever Blade – Reduces the force exerted on the master cylinder body
in the event of a fall over. This will increase the possibility to continue riding
following a fall over incident.
Advanced Secondary Seal Technology – The rear piston seal has been
specially designed to prevent the introduction of air through secondary seal
ingress. The advanced X-Ring seal design will reduce or eliminate this problem
common on racing motorcycles at higher RPM.
Reservoir Mount – The master cylinder is supplied with an external reservoir
and mounting bracket designed to use minimum space and with smoked glass
to optically determine the level and condition of the brake fluid at all times.
Titanium Retaining Bolts – Lever and clamp retaining bolts are high grade
titanium saving weight while remaining strong and durable.
dEliVERY iNClUdES
Each HC³ master cylinder comes ready to install and delivery includes:
> 3 Way Lever Ratio (mimics ±1mm hydraulic ratio adjustment)
> Banjo Connector with sealing rings
> Remote Reservoir
> Standard Clamp (without mirror mount)
> Pre-Installed Switch (for brake or clutch activation)
> ABE (German TÜV Approval) for d15 and d18 brake master
> Manual and fitting instructions
oPTioNAl EXTRAS (must be ordered separately)
> Short fold lever*
> Mirror mount clamp
> Remote lever adjuster
> Double banjo connector for 2 brake lines
> Radial adapter for Hymec pressure line
* Standard equipment on 12 mm HC3 Brake Master for racing
7
BRAKE MASTER HC³
CLUTCH MASTER HC³
8
9
10
Adapter supplied without Pressure Line or Banjo Connector
5
HC3 | oPTioNAl ANd SPARE PARTS
PoSiTioN
dESCRiPTioN
oRdER CodE
1
Fold-Lever – Long
Fold-Lever – Short
Includes retaining bolt, nut, spring and ball
2700493
2700494
2
Lever Base – Brake
Lever Base – Clutch
Includes reach adjust, bracket, piston activation rod, bellows and
titanium lever securing bolt with self locking nut and o-ring
2700496
2700495
3
Clamp
Mirror Clamp
Includes 2 titanium clamp screws
2700484
2700485
4
Reservoir Connector
Includes gasket washer
2700486
Reservoir Radial HC Brake 36 ml
Reservoir Radial HC Brake 9 ml
Reservoir Radial HC Clutch 9 ml DOT
Reservoir Radial HC Clutch 9 ml Mineral Oil
Suitable for use with HC³ and Radial 195.
Includes hose, security hose clamp (x2), retaining bracket and bolts
2700488
2700490
2700491
2700492
6
Bleed Nipple
Includes dust cover
0720527
7
Switchkit Brake
Switchkit Clutch
Includes retaining bolts
0722213
2700487
8
Banjo Connector
Doublebanjo Connector (for 2 brake lines)
Includes gasket washers
0721786
0721789
Remote Brake Lever Adjuster
On the fly Lever Reachadjustment for race track use.
2700497
Radial Pressure Line Adapter
Adapter converts banjo ring from axial to radial connection avoiding
the requirement for a new brake or clutch pressure line.
Suitable for brake and clutch applications
Suitable for application with MAGURA HYMEC pressure lines
2700499
36 ml
5
9 ml
9
10
9
ClUTCH MASTER
BRAkE MASTER
10
MAGURA Radial MASTER CYLINDER
HC3 | ABE Recommended fitment table
make/
model
APRILIA
RSV4 Factory APRC ABS
RSV4 R APRC ABS
Tuono V4 R APRC ABS
Dorsoduro 1200
Ø 15 MM
X
X
X
X
BIMOTA
DB9 Brivido S
Tesi 3D
DB11
DB5R/RE
DB8
DB6 Delirio
BMW
HP4
S 1000 RR
S 1000 R
HP2 Enduro
HP2 Megamoto
HP2 Sport
R nineT
K 1300 R
K 1300 S
K 1600 GT / Sport
DUCATI
1199 Panigale
1199 Panigale R
1199 Panigale S
1199 Superleggera
Panigale 899
Multistrada 1200 / S
Monster 1200 /S
Diavel
Ø 18 MM
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
HONDA
CB 1000 RR / SP
CBR 600 RR
VFR1200F
X
X
X
HOREX
VR6
X
make/
model
HUSQVARNA
Nuda 900R
KAWASAKI
Ninja ZX-10R
Ninja ZX-6R
Ninja ZX-6R 636
Z1000 /Special
Z 1000 SX
ZZR 1400
Z800
Ø 15 MM
X
X
X
X
X
X
X
X
KTM
1190 RC8 R
1290 Superduke R
990 Superduke /R
X
X
X
MV AGUSTA
F3 675/800
Brutale 675
Rivale 800
F4 1000 /R /RR
Brutale 1090 R / RR /
Corsa
SUZUKI
GSX-R 600
GSX-R 750
GSX-R 1000
Hayabusa 1300
TRIUMPH
Daytona 675 / R
Daytona 675
Street Triple / R
Street Triple
Speed Triple / R
X
X
X
X
X
X
X
X
X
X
X
X
X
X
VYRUS
984
YAMAHA
YZF-R6
YZF-R1
Vmax
MT09
Ø 18 MM
X
X
X
X
X
11
doT / MAGURA Blood
EASY BlEEd
with ABE
EASY MoUNT
APPRoVEd BY
CHRiS PfEiffER, MARkUS VolZ,
Rok BAGoRoS, diRk MANdERBACH,
RAPToR RACiNG, CHRiS Rid,
EWA STUNTS
doT
Features and benefits
> For Superbikes, Supermotos and street bikes!
> Optimum lever kinematics!
> Brake lever reach individually adjustable!
> Manufactured to highest quality standards!
> The lever and cylinder are forged parts!
> Direct pressure point!
> Sensitive and powerful braking and clutch
operation!
> Space-saving design!
> Excellent price/performance ratio!
In short: The complete brake master in terms of
feeling, fun and comfort.
195 MASTER CYliNdER
This highly compact radial fitting is the latest MAGURA brake and clutch
concept. Through its slanted pump arrangement, RADIAL 195 offers ideal
installation options. Like all MAGURA products, RADIAL 195 is robust,
durable and a real technological treat. The brake cylinder is supplied with
a pre-assembled brake light switch. Spares include reservoirs with fittings
and two optional lever lengths.
12
oRdER CodE
ModEl
BRAkE
0120802
0120794
0120791
0120792
0120793
foRGEd
REACH AdJUST
PiSToN Ø
ColoR
dESCRiPTioN/
APPliCATioN
Radial brake cylinder
11
12
13
16
20
Anthracite
Anthracite
Anthracite
Anthracite
Anthracite
With short lever blade
With short lever blade
With short lever blade and ABE
With long lever blade and ABE
With long lever blade and ABE
ClUTCH
0120643*
0120641*
Radial clutch cylinder
13
13
Anthracite
Aluminium
0120691*
12
Anthracite
Only for DOT, with long lever blade
Only for mineral oil, with long lever blade,
OEM KTM DUKE 950
Only for mineral oil, with long lever blade,
compatible with MAGURA-HYMEC
Weight | approx. 280 g
Lever ratio | 1:5
Reach adjust | 16 mm
* Clutch models are supplied without switch.
If switch is required see spare-parts on page 13.
in mm
195 MASTER CYliNdER
1
2
3
4+5
5
6
PoSiTioN
ModEl
dESCRiPTioN/
APPliCATioN
16 ml flange mount for single calliper
brake systems
oRdER CodE
1
195 Brake reservoir
2
195 Brake reservoir
36 ml remote mount for double calliper
brake systems
2700488
3
195 Clutch reservoir
9 ml flange mount for mineral oil
(compatible with HYMEC)
2700787
4
9 ml remote mount for mineral oil
2700492
5
9 ml remote mount for DOT
2700491
2700786
13
THE RETRofiTTABlE
HYdRAUliC ClUTCH SYSTEM
RoBUST
EASY To MoUNT
EXCEllENT ModUlATioN
lESS MAiNTENANCE
MAGURA HYMEC
MAGURA.COM
MAGURA Blood
Breakaway lever
REACH AdJUST
Mirror mount
RHR Rotatable Hose Routing
EASY fill
APPRoVEd BY AlEX SAlViNi
TEAM HRC REdMoTo RACiNG WoRld ENdURo CHAMPioN 2012
*
16
MAkE / ModEl
YEAR
oRdER
CodE
liNE
lENGTH
PiSToN-Ø
ASSEMBlY
SlAVE No.
MASTER
PRESSURE
liNE
AJP
PR5
09 →
2100006**
1120 mm
9,5 mm
65
0120651
2700183
0722137
HoNdA
CRF 150
CR 250 R
CR 250 R
CRF 250 R
CRF 250 R
CRF 250 R
CRF 450 R
CRF 450 R
CRF 450 R
CRF 450 R
CR 500 R
08 → 14
90 → 03
04 → 06
04 → 09
10 → 13
14 → 15
04 → 08
09 → 12
13 → 14
2015
84 → 03
2100004
2100019
2100007**
2100009
2100005
2100307
2100010
2100005
2100030
2100363
2100019
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
10,5 mm
9,5 mm
9,5 mm
70
52
44
57
57
32 (H+)
41 (H+)
57
59
32 (H+)
52
2100003
0120648*
0120649*
0120655
0120655
2100308*
0120649*
0120655
0120652
2100308*
0120648*
2700183
2700183
2700183
2700183
2700183
2700183
2700183
2700183
2700186
2700183
2700183
0722138
0722138
0722138
0722138
0722138
0722138
0722138
0722138
0722138
0722138
0722138
kAWASAki
KX 250
KX 250 F
KX 250 F
KX 450 F
KX 450 F
KX 500
90 → 98
04 → 08
09 → 15
09 → 14
2015
90 → 03
2100004**
2100019**
2100006
2100007
2100364
2100004**
1045 mm
1045 mm
1120 mm
1045 mm
1045 mm
1045 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
70
52
65
44 (H+)
47 (H+)
70
2100003
0120648*
0120651
0120649*
0120648*
2100003
2700183
2700183
2700183
2700183
2700183
2700183
0722138
0722138
0722137
0722138
0722138
0722138
kTM
250 SX 300/360
90 → 94
2100019
1045 mm
9,5 mm
52
0120648*
2700183
0722138
SUZUki
RM 250
RM-Z 250
RM-Z 250
RM-Z 250
RM-Z 450
97 → 03
04 → 05
2009
10 → 15
09 → 15
2100019
2100019
2100011
2100302
2100012
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
52
52
44 (H+)
57 (H+)
44 (H+)
0120648*
0120648*
0120649*
0120655*
0120649*
2700183
2700183
2700183
2700183
2700183
0722138
0722138
0722138
0722138
0722138
YAMAHA
YZ 250
YZ 250
YZ 250 F
YZ 250 F
YZ 450 F
YZ 450 F
88 → 98
99 → 03
09 → 13
14 → 15
03 → 05
09 → 15
2100004**
2100019
2100008
2100302
2100019**
2100008
1045 mm
1045 mm
1120 mm
1045 mm
1045 mm
1120 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
9,5 mm
70
52
59
57
52
59
2100003
0120648*
0120652
0120655
0120648*
0120652
2700183
2700183
2700183
2700183
2700183
2700183
0722138
0722138
0722137
0722138
0722138
0722137
Spare Part Slave Cylinder = Spare slave cylinders since 2012 are equiped with standard cap and bracket - please ensure when ordering to check if cap
and bracket are also required
** Extra Parts are required to fit this Hymec kit to this motorcycle - check separate table on page 17
H+ Slave attached from rear cap with stud 0430998
MAGURA hymec
Carbon tubing
167 HYMEC | OFF-ROAD MAGURA HYMEC – An easy to install alternative to a mechanical clutch. This system replaces the clutch
lever and cable – with a small lightweight hydraulic system for improved clutch control. The HYMEC
ensures an easier operating pressure, a constant pressure point, no more cable adjustment and smooth
clutch actuation to ensure the perfect take-off every time.
Clutch operation with the MAGURA hydraulic kick. The thousand-fold proven hydraulic clutch operating
system for Motocross and Enduro. Superior technology which unites an abundance of unique advantages into one: No fading, superfine modulation, almost maintenance-free, automatic compensation for
clutch wear and up to 20 % less actuating force! HYMEC provides a uniquely sensitive operation and significantly improves vehicle control. A weight saving of up to 150 grams is possible according to the model.
** Extra Parts additionalLy Required!
EASY MOUNT
Make /
Model
Year
HymecNo.
Order
Code
Order
Code
CR 250 R
KX 250
KX 250 F
KX 500
PR 5
RM-Z 250
YZ 250
YZ 450 F
04 → 06
90 → 98
04 → 08
90 → 03
09 → 15
04 → 05
88 → 98
03 → 05
2100007
2100004
2100019
2100004
2100006
2100019
2100004
2100019
0430987
0412310
0430240
0412310
0723115
0430240
0412310
0430240
0488255
0451530 (x3)
0723189
0451530 (x3)
2700177
0723189
0451530 (x3)
0723189
+
+
Make / Model
Order Code
Rear Cap
Bracket
Piston Kit
Clamp
Lever
AJP
PR5
2100006
0430217
0430224
0723184
2700177
0723290
HONDA
CRF 150
CR 250 R
CR 250 R
CRF 250 R
CRF 250 R
CRF 250 R
CRF 450 R
CRF 450 R
CRF 450 R
CRF 450 R
CR 500 R
2100004
2100019
2100007**
2100009
2100005
2100307
2100010
2100005
2100030
2100363
2100019
0430217
0430217
0430998
0430217
0430217
0430998
0430998
0430217
0430217
0430998
0430217
0430224
0430987
0431002
0430224
0430224
2401084
0431001
0430224
0430224
2401330
0430987
0723184
0723184
0723184
0723184
0723184
0723184
0723184
2700184
0723185
0723184
0723184
2700176
2700176
2700176
2700176
2700176
2700176
2700176
2700185
2700176
2700176
2700176
0723290
0723290
0723290
0723290
0723290
0723290
0723290
0723290
0723290
0723290
0723290
KAWASAKI
KX 250
KX 250 F
KX 250 F
KX 450 F
KX 450 F
KX 500
2100004**
2100019**
2100006
2100007
2100364
2100004**
0430217
0430217
0430998
0430217
0430998
0430217
0430224
0430987
0431002
0430224
2401327
0430224
0723184
0723184
0723184
0723184
0723184
0723184
2700176
2700176
2700176
2700176
2700176
2700176
0723290
0723290
0723290
0723290
0723290
0723290
KTM
250 SX 300/360
2100019
0430217
0430987
0723184
2700176
0723290
SUZUKI
RM 250
RM-Z 250
RM-Z 250
RM-Z 250
RM-Z 450
2100019
2100019
2100011
2100302
2100012
0430217
0430217
0430998
0430998
0430998
0430987
0430987
0430990
0430990
0430991
0723184
0723184
0723184
0723184
0723184
2700176
2700176
2700176
2700176
2700176
0723290
0723290
0723290
0723290
0723290
YAMAHA
YZ 250
YZ 250
YZ 250 F
YZ 250 F
YZ 450 F
YZ 450 F
2100004**
2100019
2100008
2100302
2100019**
2100008
0430217
0430217
0430217
0430217
0430217
0430217
0430224
0430987
0430224
0430224
0430987
0430224
0723184
0723184
0723184
0723184
0723184
0723184
2700176
2700176
2700176
2700176
2700176
2700176
0723290
0723290
0723290
0723290
0723290
0723290
Order
Code
+
0412310
0412310
0412310
New
NEW
NEW
Spare Parts on Pages 20/23
17
MAGURA BLOOD
Breakaway lever
REACH ADJUST
RHR Rotatable Hose Routing
EASY FILL
Make / Model
Year
Order
Code
Master
Type
Line
Length
BOMBARDIER
DS 650 ATV
04 → 09
2100020
167 Black
1045 mm
BMW
F 800 Models
HARLEY DAVIDSON
Big Twin*
Big Twin*
Sportster*
Sportster*
Sportster*
Sportster*
9.5 mm
Assembly
Slave No.
Master
73
0120653
0723295
06 →
2100021
167 Black
1045 mm
12 mm
55 - 75
2100022
2700482
Suitable for application on F 800 R/F 800 S/F 800 ST/F 800 GT/F 800 GS (without handguards)/F 700 GS/F 650 GS (08 - 12)
99 → 07
99 → 07
96 → 15
96 → 15
96 → 15
96 → 15
NA
0120614 B
0120601
0120602
0120611
0120612
80" Black
2030 mm
10.5 mm
NA
80" Chrome
2030 mm
10.5 mm
NA
80" Black
2030 mm
10.5 mm
71
57" Black
1450 mm
10.5 mm
71
80" Chrome
2030 mm
10.5 mm
71
57" Chrome
1450 mm
10.5 mm
71
Big Twin-Hymec only suitable for 5 speed gearbox models
0722179
0722179
0722160
0722160
0722160
0722160
0722163
0722180
0722163
0722163
0722180
0722180
HONDA
CBF 600 S / N (PC38)
CBF 600 (PC43)
NC 700 S
NC 700 X
NC 750 S
NC 750 X
04 → 07
12 → 14
12 → 14
12 → 14
2015
2015
2100001
2100001
2100001
2100001
2100001
2100001
167 Black
167 Black
167 Black
167 Black
167 Black
167 Black
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
10.5 mm
64
61
61
61
61
61
0120651
0120651
0120651
0120651
0120651
0120651
2700185
2700185
2700185
2700185
2700185
2700185
HUSQVARNA
Nuda
12 → 14
2100021
167 Black
1045 mm
12 mm
55 - 75
2100022
2700482
KAWASAKI
Z750
ER-6N
Versys
Z800
Z1000
09 → 12
06 → 09
07 → 10
13 → 15
10 → 15
0120689
0120689
0120689
2100309
2100309
167 Black
167 Black
167 Black
167 Black
167 Black
1045 mm
1045 mm
1045 mm
1045 mm
1045 mm
9.5 mm
9.5 mm
9.5 mm
10.5 mm
10.5 mm
65
65
65
55
55
0120651
0120651
0120651
0120655
0120655
0723295
0723295
0723295
2700185
2700185
SUZUKI
SV 650
99 → 10
0120689
167 Black
1045 mm
9.5 mm
65
0120651
0723295
TRIUMPH
Street Triple 675
Tiger 800 / 800 XC
Tiger 800 XR
12 → 15
10 → 14
2015
2100303
2100303
2100303
167 Black
167 Black
167 Black
1120 mm
1120 mm
1120 mm
10.5 mm
10.5 mm
10.5 mm
H+32
H+32
H+32
2100308*
2100308*
2100308*
2700185
2700185
2700185
YAMAHA
SR 400/500
All
167 Black
1045 mm
9.5 mm
73
0120653
0723295
FZ6
07 → 10
2100020
+ Deco lever
0723189
0120689
167 Black
1045 mm
9.5 mm
65
0120651
0723295
* for inch handlebars
(ø 25.4 mm)
18
Piston-Ø
B = Model still available while stocks last
NA = Not available
OE = Original Harley Clamp. Not included!
H + = Slave attached from rear cap with stud
MAGURA hymec
Clutch switch
depending on model
Carbon tubing
HYMEC for Harley
STREET-HYMEC
MAGURA HYMEC – An easy to install alternative to a mechanical clutch. This system replaces the
clutch lever and cable – with a small lightweight hydraulic system for improved clutch control.
The HYMEC ensures an easier operating pressure, a constant pressure point, no more cable
adjustment and smooth clutch actuation to ensure the perfect take-off every time.
EASY MOUNT
HYMEC significantly improves vehicle performance – it allows the user to feel the point where
the clutch releases and actuates. This product has been developed over many years and been
tested under the toughest conditions possible in the world of motorcycle Off-Road sport. It has
been used by world champion riders who all agree as to the benefits but it is just as useful to the
complete novice who stalls at the traffic lights. Due to demand MAGURA now offers the HYMEC
system for various road going motorcycles.
Mirror mount
Make / Model
BOMBARDIER
DS 650 ATV
BMW
F 800 Models
HARLEY DAVIDSON
Big Twin*
Big Twin*
Sportster*
Sportster*
Sportster*
Sportster*
Order
Code
Pressure
Line
Lever
Bracket
Rear
Cap
Piston Kit
Clamp
2100020
0722138
2700244
0430224
0430217
0723184
2700177
2100021
0722138
0723296
NA
0430217
2700489
2700385
Suitable for application on F 800 R/F 800 S/F 800 ST/F 800 GT/F 800 GS (without handguards)/F 700 GS/F 650 GS (08 - 12)
NA
0120614 B
0120601
0120602
0120611
0120612
0722178
0722178
0722162
0722161
0722162
0722161
0722182
NA
0430217
0722164
0722182
NA
0430217
0722164
0722167
NA
0430217
0722164
0722167
NA
0430217
0722164
0722182
NA
0430217
0722164
0722182
NA
0430217
0722164
Big Twin-Hymec only suitable for 5 speed gearbox models
OE
OE
OE
OE
OE
OE
1
HONDA
CBF 600 S / N (PC38)
CBF 600 (PC43)
NC 700 S
NC 700 X
NC 750 S
NC 750 X
2100001
2100001
2100001
2100001
2100001
2100001
0722138
0722138
0722138
0722138
0722138
0722138
2700244
2700244
2700244
2700244
2700244
2700244
0430224
0430224
0430224
0430224
0430224
0430224
0430217
0430217
0430217
0430217
0430217
0430217
0723185
0723185
0723185
0723185
0723185
0723185
2700177
2700177
2700177
2700177
2700177
2700177
HUSQVARNA
Nuda
2100021
0722138
0723296
NA
0430217
2700489
2700385
KAWASAKI
Z750
ER-6N
Versys
Z800
Z1000
0120689
0120689
0120689
2100309
2100309
0722138
0722138
0722138
0722138
0722138
2700244
2700244
2700244
0723296
0723296
0430224
0430224
0430224
0430224
0430224
0430217
0430217
0430217
0430217
0430217
0723184
0723184
0723184
0723185
0723185
2700177
2700177
2700177
2700177
2700177
SUZUKI
SV 650
0120689
0722138
2700244
0430224
0430217
0723184
2700177
TRIUMPH
Street Triple 675
Tiger 800 / 800 XC
Tiger 800 XR
2100303
2100303
2100303
0722137
0722137
0722137
2700244
2700244
2700244
NA
NA
NA
2100018
2100018
2100018
0723185
0723185
0723185
2700177
2700177
2700177
2100020
+ Deco lever
0723189
0120689
0722138
2700244
0430224
0430217
0723184
2700177
0722138
2700244
0430224
0430217
0723184
2700177
* for inch handlebars
(ø 25.4mm)
YAMAHA
SR 400/500
FZ6
NEW
NOTE
B = Model still available while stocks last
NA = Not available
OE = Original Harley Clamp. Not included!
H + = Slave attached from rear cap with stud
Spares only
Spares only
New
New
2014
2014
2014
2014
New
19
167 HYMEC | MASTER CYliNdER
167 HYMEC | SlAVE CYliNdER
Slave cylinder
seal-kits not available
as spare parts!
20
MAGURA hymec
167 HYMEC | SPARE PARTS
POSITION
DESCRIPTION
ITEM CODE
1
Master cylinder*
Page36/37
2
Clamp with spiral spin
Clamp for threaded mirror mounting M 10x1.25 mm
Clamp for threaded mirror mount M 10x1.5mm (BMW)
2700176
2700177
2700385
3
Clutch switch
Clutch switch BMW F 800 Hymec
0723187
2700384
4
Protection cover for lever without choke lever
Protection cover for lever with choke lever
0723163
0723202
5
Long lever blade with adjustment wheel
Short lever blade with adjustment wheel
Black lever blade with adjustment wheel
Silver lever blade with adjustment wheel
0723290
0723121
0723296
2700244
6
Screw for lever without deco
0723115
7
Deco lever black
Hot start lever red
0723189
0723188
8
Reservoir cover for mineral oil use with bellow and screws
Reservoir cover for DOT use with bellow and screws
2700501
2700215
9
Bellows with push rod and washer
0723116
10
Master piston-Ø
20
Slave cylinder
Page 22/23
21
Cap bronze anodised
Cap with stud bronze anodised
Cap “universal”
0430217
0430998
2100018
22
Tubekit carbon with accessories
l = 1,120 mm
Tubekit CARBON with accessories
l = 1,045 mm
Tubekit PA with accessories (cut to size) l = 1,500 mm
0722137
0722138
0722679
23
Banjo bolt with bleeding valve for carbon tubings
M 6x16.5 mm
0722136
24
Nipple
0412310
25
Spacer/Washer
0451530
26
Sleeve for 2-stroke 15 mm
0430985
0430987
27
O-ring (needed for sleeve 0430985 and 0430987)
0488255
28
1. Mounting adapter Suzuki RM-Z 250, model year 2004-2008
1. Mounting adapter Kawaski KXF 250, model year 2004-2008
2. Mounting adapter Honda CRF 450 R, model year 2004
3. Mounting adapter Kawasaki KX 450 F, model year 2006
4. Mounting adapter Honda CRF 450 R, model year 2004–2009
5. Mounting adapter Suzuki RM-Z 250, from model year 2009
6. Mounting adapter Suzuki RM-Z 450, from model year 2009
7. Mounting adapter Kawasaki KX 450 F, from model year 2009
8. Mounting adapter Honda CRF 250 R, from model year 2014
9. Mounting adapter Honda CRF 450 R, model year 2015
10. Mounting adapter Kawasaki KX 450 F, model year 2015
0430240
0430240
0430220
0430997
0431001
0430990
0430991
0431002
2401084
2401330
2401327
29
Support
0430224
30
MAGURA-Blood 100 ml
MAGURA-Blood 1 liter
Service-Kit HYMEC
0721820
0721821
0722152
l = 146 mm off-road
l = 123 mm off-road
l = 163 mm street
l = 163 mm street
9.5 mm mineral oil
10.5 mm mineral oil
12 mm mineral oil
0723184
0723185
2700489
21
oPTioNAl EXTRAS foR YoUR SlAVE CYliNdER
Nipple: If your clutch cable has a large attachment nipple you will require a nipple for the end
of your HYMEC slave cylinder activation rod.
Order code 0412310
Universal Attachment Kit: This kit facilitates the
attachment of the HYMEC slave cylinder from the
rear cap. It has an adjustable range and will add
55 to 70 mm to the activation length when used in
conjunction with any of the slave cylinders listed
on page 23.
Please note that the slave cylinder rear cap has a secondary
breather function and should not be sealed when replaced.
Order code 2100018
Cap with Stud: If your HYMEC is attached from
the rear you may require the cap with stud. This
part is designed only for use with model specific
adaptors .
Sleeve for 2 Stroke Models: If the HYMEC slave
cylinder is located under the clutch cover it may
be necessary to use one of the sleeves in conjunction with an o-ring.
Please note that the slave cylinder rear cap has a secondary
breather function and should not be sealed when replaced.
Sleeve for 2-stroke models:
Order Code
0430985 15 mm long version
0430987 12 mm short version
0488255 O-ring fits both of the above versions
Order code 0430998
REPlACEMENT HYMEC ClUTCH SlAVE CYliNdERS
If you have an older HYMEC clutch activation system and require a replacement slave cylinder but are not aware of the correct part number we have
devised a method to make it easier for you to establish the part number for
the replacement.
Remove the slave cylinder from the motorcycle and activate the master
cylinder until the slave cylinder activation rod is fully retracted and withdrawn. The piston in the slave cylinder is now contacting the bronze cap at
the back of the slave cylinder and the rod length should be measured as
shown in the table below. If the slave cylinder is no longer working it can be
removed from the pressure line and forced slowly and carefully into the slave
cylinder for the measurement.
Please note – the length you are measuring is not the activation length – the
activation length is 16mm longer than the withdrawn length. Following the
measurement please do not disregard your old slave cylinder you may require
the cap or the support. All of our replacement HYMEC slave cylinders are delivered with the standard cap and standard support as shown in the pictures.
If the slave cylinder you require lies between two different activation lengths
– always order the longer version and use spacers between the support and
the cable attachment to increase the activation length to suit your motorcycle.
SPECiAl REPlACEMENT HYMEC SlAVE CYliNdERS
61 mm
BMW f 800
> F 700 GS
> F 800 GS
> F 800 R
> F 800 S
> F 800 ST
> F 800 GT
> F 650 GS (Twin)
> HUSQVARNA NUDA
ACTiVATioN
lENGTH
57-78 mm
iTEM CodE
2100022
HARlEY SPoRTSTER fRoM 1996
Spacer block for assembly should be removed
after installation.
iTEM CodE
0722160
BUEll XB-ModEllE 2002 – 2010
Spacer block for assembly should be removed
after installation.
iTEM CodE
0120624
22
MAGURA HYMEC
EXAMPlE
Withdrawn Length
16 mm
Activation length
4 mm
freeplay
Replacement HYMEC Slave Cylinders – to measure your
slave cylinder – activate the master cylinder until the pull
rod is fully withdrawn.
WiTHdRAWN lENGTH
A
ACTiVATioN lENGTH
16 mm 31–33 mm
Order code 2100308
16 mm
B
24 mm 39–41 mm
Order code 0120649
24 mm
C
31 mm 46–48 mm
Order code 0120648
31 mm
d
35 mm 51–53 mm
Order code 0120655
35 mm
E
41 mm 56–58 mm
Order code 0120652
41 mm
f
45 mm 60–62 mm
Order code 0120651
45 mm
G
50 mm 65–67 mm
Order code 2100003
50 mm
H
55 mm 70–72 mm
Order code 0120653
55 mm
i
67 mm 82–84 mm
Order code 0120659
67 mm
J
90 mm 105–107 mm
Order code 0120657
90 mm
23
BUild YoUR oWN
HYMEC HYdRAUliC
ClUTCH!
The MAGURA Hymec system is world renowned
as a hydraulic conversion for cable activated
clutches. The system is compatible with most
cable operated clutch systems and offers a direct
constant pressure point. The advantages of the
system are well documented in the press and
riders forums. Any riders with small hands who
have difficulty reaching the lever, and world
champion sports riders who require accuracy and
single or 2-finger operation will immediately feel
the benefits. Because we get constant requests
for motorcycle models which we have never
measured for the system we have put together
this DIY information to assist customers to get
the clutch they require.
WHAT do i NEEd To BUild A HYMEC foR MY BikE?
1. MASTER CYliNdER + 2. PRESSURE liNE, fiTTiNGS ANd oil + 3. SlAVE CYliNdER
1. MAGURA offER 3 MASTER CYliNdER oPTioNS:
Master Cylinder – as the system requires mineral oil and cannot be used with brake fluid the master cylinder should be mineral oil compatible.
HC³ Fully Radial Master
Order Code 2100301
Max. slave stroke: 8-13 mm*
Full details on page 6
195 Slanted Radial Master
Order Code 0120691
Full details on page 12
167 Axial Master
Ø 9,5 Street (Light operation) Order Code 0723295
Ø 10,5 Street (Sports clutch) Order Code 2700185
Full details on page 37 and 20
HC³ - Reservoir, switch and
banjo bolt included
195 - Reservoir, switch and
banjo bolt NOT included
167 Street Master – switch, mirror clamp
and black street lever included
Optional extras:
Mirror Clamp
Order Code 2700485
Optional extras:
Reservoir 195
Clutch Reservoir detached
Order Code 2700492
or Clutch Reservoir integrated
Order Code 2700787
Mirror Clamp Order Code 0722201
Optional extras:
Lever Silver
Order Code 2700244
Non mirror clamp
Order Code 2700176
2. PRESSURE liNE, fiTTiNGS ANd SERViCE-kiT
A
B
C
d
d
d
E
f
A
PART dESCRiPTioN
Radial Pressure Line Adapter
Banjo Bolt for master cylinder
Clutch Switch
Pressure Line L=1500 mm cut to size
Pressure Line carbon L=1045 mm
Pressure Line carbon L=1120 mm
Banjo Bolt with Bleeder for slave
Service-Kit HYMEC (Fill and Bleed Kit)
oRdER CodE
2700497
0721786
0722102
0722679
0722138
0722137
0722136
0722152
B
D
C
* Max. Slave stroke refers to possible max. stroke with lever adjusted to largest reach position.
24
HC³
x
–
–
– 1)
x
x
x
x
195
x
x
x
– 1)
x
x
x
x
167
–
–
–
x
x
x
x
x
1)
Pressure Line 0722679
is not suitable for use with
radial pressure line adapter
2700497
Only one pressure line is
required - there are 3
options available - please
measure the cable before
ordering
E
F
MAGURA HYMEC
3. SlAVE CYliNdER
In order to ascertain the correct slave cylinder for your motorcycle you will
need to cut the template slave cylinder from this page, fit to the motorcycle
and cut to size. If you do not feel qualified to remove the clutch cable please
seek assistance from your local motorcycle technician.
There are 2 basic forms of slave cylinder attachment
1. Standard cable fitting: Slave template 1
2. Attached from rear: Slave template 2 (For longer assembly lengths the
rear cap on the slave cylinder is replaced and attached between the
cable attachment and clutch activation arm.)
Slave template 1
Slave template 2
SlAVE TEMPlATE 1
Carefully cut the template out and fit to your
motorcycle. The clutch activation arm at the
engine should be pushed with your finger as far
forward towards the slave cylinder as possible
and the template should then be cut at the next
longest available point.
Then compare the number on the template to the
list on page 23 to pick the correct slave cylinder.
If the slave is too long it can be shortened by
placing spacer washers between the slave and the
mounting point – if it is too short it will not work
correctly. If in doubt choose the longer version.
32
A
40
B
47 52 57 61 66 71
C d E f G H
82
i
106
J
SlAVE ATTACHMENT PoiNT
49 mm
106 mm
L
SlAVE TEMPlATE 2
Carefully cut the template out and fit to your
motorcycle. The clutch activation arm at the
engine should be pushed with your finger as far
forward towards the slave cylinder as possible
and the template should then be cut at the next
longest available point. Then compare the number
on the template to the list
on page 23 to pick the correct slave cylinder –
you will also require Order Code 2100018
Universal Attachment Kit to mount the slave from
behind. The threaded attachment kit at the rear
should allow for sufficient adjustability when
installing the slave cylinder.
32
A
40
B
47 52 57 61 66 71
C d E f G H
82
i
106
J
SlAVE ATTACHMENT PoiNT
70 mm
106 mm
L
PoSSiBlE SlAVE CYliNdER dEViATioNS
Some motorcycle
models require a large
nipple to attach to the
clutch activation arm
Order Code
0412310
Some 2 stroke models have the cable fitted
beneath an engine casing and require a special
2 stroke bracket.
Order Code
0430985 15 mm long version
0430987 12 mm short version
0488255 O-ring fits both of the
above versions
CUSToMER fEEdBACk:
Dear MAGURA Team, You have managed to amaze we. Just a few
minutes ago I finished the installation work on my Kawasaki Versys
650 and have completed the initial test ride with the new HYMEC.
What you have developed and built is simply sensational. I have a
new motorcycle! That anything could have surprised me so much on
my bike having already ridden over 40,000 km - I would never have
imagined. Thank you – thank you for this great product. Heiko Bohn
BEfoRE iNSTAlliNG YoUR NEW HYMEC PlEASE
doWNloAd THE CURRENT HYMEC-MANUAl fRoM
oUR WEBSiTE! HYMEC doES NoT AffECT YoUR
VEHiClE REGiSTRATioN.
25
MAGURA PERfoRMANCE PARTS f0R BMW
MAGURA HAVE BEEN SUPPlYiNG
PARTS To BMW MoToRCYClES oN
EVERY ModEl SiNCE 1923.
WHEN iT CoMES To CoNTRol NoBodY
doES iT BETTER. THE EXPERiENCE of
oVER 90 YEARS floWS iNTo oUR
AfTERMARkET PRodUCTS To ENSURE
THAT AN UPGRAdE iS JUST THAT.
MAGURA.COM
HYMEC for F800
oRdER CodE
ModEl
2100021
F 800 R, F 800 GS, F 800 S/ST,
F 800 GT, F 650 GS (Twin),
F 700 GS (without handguards)
oRdER CodE 2100017
oRdER CodE 2100016
with ABE
REPlACEMENT lEVERS
foR BMW MoToRCYClE.
MAGURA replacement levers represent an
improvement on motorcycles since 1923.
The ergonomics, material quality and finish
are first class. Tested and approved by the
TÜV organisation in Germany these levers
meet and surpass the highest standards set
for master cylinder operation on a motorcycle.
Trust MAGURA to offer the best levers for
your bike.
MAGURA
ModEl
PERfoRMANCE
YEAR
PARTSModEl
foR BMW
CodE
ClUTCH
BRAkE lEVER
lEVER
MAGURA
replacement levers represent an improvement on motorcycles since 1923. The ergonomics,
650/700
material
quality and finish are
first– class.
and approved by the
organisation
in Germany
F 650 GS
2007
2012 TestedK72
NotTÜV
available
2100016
these
the highest standards
cylinder
operation on
a motorcycle.
F 700levers
GS meet and surpass
2013–
K72 set for master Not
available
2100016
Trust MAGURA to offer the best levers for your bike.
800
2100016
Not availabl�
K72
2007–
F 800 GS/Adv
2100016
Not available
K71
2012–
F 800 GT
2100016
Not available
K73
2007–
F 800 R
2100016
Not available
K71
2007–
F 800 S/ST
1200
R 1200 GS/Adv
R 1200 R
R 1200 S
R 1200 ST
HP2 Enduro
HP2 Megamoto
HP2 Sport*
K 1200 S
K 1200 R
K 1200 R Sport
K 1200 GT
2003 – 2013
2006 – 2014
2005 – 2009
2004 – 2008
2005 – 2007
2007 – 2010
2007 – 2010
2005 – 2009
2005 – 2009
2005 – 2009
2005 – 2009
K25
K27
K29
K28
K25HP
K25/03
K29HP
K40
K43
K43
K44
2100017
2100017
2100017
2100017
2100017
2100017
0722112
2100017
2100017
2100017
2100017
2100016
2100016
2100016
2100016
2100016
2100016
0722202
2100016
2100016
2100016
2100016
1300
K 1300 S
K 1300 R
K 1300 GT
2009–
2009–
2009 – 2012
K40
K43
K44
2100017
2100017
2100017
2100016
2100016
2100016
*This lever is not pictured on this page – please see 195 Radial Master Cylinder (on pages 12-13)
28
PERfoRMANCE PARTS foR BMW
APPRoVEd BY
SiMoN PAVEY, ToMM Wolf
BMW off-RoAd iNSTRUCToRS
with ABE
Suitable for use on:
> R 1200 GS LC
> R 1200 GS LC Adventure
> R 1200 R LC
> R 1200 RT LC
> R 1200 ST LC
> R nineT
UPGRAdE YoUR BMW WiTH MAGURA
PERfoRMANCE PARTS
The new BMW R-models are set to establish new benchmark in the Adventure-,
Touring- and Urban category. How do you improve the best motorcycle controls
available? Easy with MAGURA Performance Parts! To celebrate 90 years in
the search for perfect control on a motorcycle we have prepared an upgrade
kit for your new BMW Motorcycle with two optional elements.
oRdER CodE 2100013
MAGURA Performance Parts will add value to your motorcycle. They are
designed to stand the test of time and can be ordered and fitted separately
or together as you wish. The materials used are lightweight and extremely
durable and strong – we would like to wish you many miles of motoring
pleasure with your upgrade – each product contains 90 years of motorcycling
Know How combined with our passion for perfection.
Fold Away Lever Kit | Honed from top grade aluminium with position detent
lock and fully ABE tested and approved. Can be fitted with the standard
reach adjuster or with the included MAGURA reach adjust selector. Fold
Away Lever Kit pictured features upgrade Reach Adjust Selector Kit.
oRdER CodE 2100015
CNC Reservoir Cover Kit | Honed from top grade aluminium this kit will
add optically to your new BMW. Reservoir breather remains fully functional
and an optional fluid level sight glass protector is included just in case you
intend to use the bike to cross continents.
29
liGHT
ERGoNoMiCAllY dESiGNEd
RoBUST
REdUCEd RidER fATiGUE
HANdlEBARS
MAGURA.COM
2014 / 2015
TECHNiCAl PARTNER TEAM HRC dAkAR –
HANdlEBAR SUPPliER
X-liNE SERiES
The bulged alloy handlebars from MAGURA: Light, stable, reduced rider
fatigue! Ball burnished finish for increased lifetime durability.
MAGURA-quality handlebars are TÜV approved.
Patented: DE 197 07 203/US 5,950,497
32
oRdER CodE
ModEl
0723198
ColoR
diMENSioNS in mm
a
b
c
f1
h
AX2 Big-Enduro Handlebar Silver
827
134
230
206
100
0721245
MX2 Motocross,
Supermoto
Silver
808
135
189
119
77
0723050
CX “Street”
Silver
805
135
200
117
76
0721053
EX Enduro
Silver
795
135
186
120
87
0721052
MX Extreme Motocross
Silver
808
135
195
105
80
0721055
SX Supercross,
Supermoto, Motocross
Silver
808
135
189
120
63
0723248
TX Touring
Black
797
139
217
138
97
0723247
FX Streetfighter
Black
750
137
210
98
107
0723221
SX “Street”
Black
808
135
189
120
63
0723283
CPX –
Chris Pfeiffer Edition
Black
797
131
231
113
76
handlebars
PATENTED MANUFACTURING PROCESSES
ERGONOMIC SHAPE
joint-protecting
HIGH-STRENGTH ALUMINIUM
ACCESSORIES
X-line fork clamp kit for
bikes with split clamp.
Screw M 10x70, with
bushings.
X-line clamp kit for
one piece clamp/
fork bridges.
Fits HONDA, YAMAHA,
SUZUKI etc.,
hole distance
32–36 mm.
OFF-ROAD
Order code 0720474
OFF-ROAD
Order code 0720488
MAGURA-Barpad,
color: black.
Order code 0723058
New black X-line
“Street” clamp kit for
bikes with split clamp
(complete).
New black X-line
“Street” clamp kit
for 22 mm clamp
conversion, clamping
range 32–36 mm.
New black X-line
“Street” clamp kit
for 22 mm clamp
conversion, allows
16 mm movement of
handlebar forwards
and backwards as
required from the top
of the triple clamp.
ON-ROAD
Order code 0723270
ON-ROAD
Order code 0723271
ON-ROAD
Order code 0723272
33
HYdRAUliC MASTER CYliNdERS ANd
SPARE PARTS foR BRAkE SYSTEMS
MAXiMUM
PERfoRMANCE
oRiGiNAl MAGURA
SPARE PARTS
QUAliTY
MAdE iN GERMANY
MAGURA.COM
167 HYdRAUliC BRAkE ANd ClUTCH
MASTER CYliNdER
Breakaway lever
Hydraulic brake and clutch control, one piece aluminium cylinder with
reservoir, forged and break-proofed alloy lever blade, optimized reach
adjustable, easy to fix with a new designed clamp, the compact construction
avoids collisions when riding extreme, cylinder and lever blade pivot
doT
protected against foreign elements with rubber cap. Available for use with
mineral oil or brake fluid.
Breakaway lever
doT oR MAGURA Blood
REACH AdJUST
REACH AdJUST
EASY MoUNT
167 ClUTCH MASTER CYliNdER
36
EASY MoUNT
HYDRAULIC MASTER CYLINDERS AND SPARE PARTS FOR BRAKE SYSTEMS
ORDER CODE
MODEL
CLUTCH
2700183
Master cylinder 167.2 ls
2700186
PISTON Ø
MEDIUM
DESCRIPTION
9.5
Mineral oil
10.5
Mineral oil
2700184
9.5
DOT
2700187
10.5
DOT
0723295
9.5
Mineral oil
2700185
10.5
Mineral oil
2700482
Master cylinder 167.6ls
12
Mineral oil
Black Offroad-Master cyl., silver lever blade 146 mm,
deco lever, clutch switch, mirror-mounting bracket
Black Street-Master cyl., black lever blade 163 mm,
Black Street-Master cyl., black lever blade 163 mm,
clutch switch, mirror-mounting bracket
Black Street-Master cyl, black lever blade163 mm,
clutch switch BMW, mirror-mounting bracket
BMW (M10x1.5 mm)
BRAKE
0120842
Brake control 167.60 cni
in mm
9.5
DOT4/5.1
APPLICATION
Offroad-Master cyl., silver lever blade 123 mm
Color as shown on page 36. Not available in
black.
* Find clutch switches page 54
Maximum stroke | 13.8 mm
Lever ratio | 1:4
Tubing fitting | M 10x1
167 BRAKE MASTER CYLINDER
37
CNC
MACHINED
SPARE PARTS FOR 190 ebz* MASTER CYLINDER
38
HYdRAUliC MASTER CYliNdERS ANd SPARE PARTS foR BRAkE SYSTEMS
163 cni* HYdRAUliC ClUTCH
MASTER CYliNdER
*cni | chemical nickel-plated surface
Hydraulic clutch lever, one piece aluminium cylinder with reservoir, forged
alloy lever blade, pressure point adjustable and reach adjustable, easy to fix
with clamp, cylinder and lever blade pivot protected against foreign elements
with rubber cap. Available for using mineral oil or brake fluid.
oRdER CodE
ModEl
0120607 B
Master cylinder 163.40
0120615 B
0120587 B
Master cylinder 163.3.10 10.5
Lever ratio | 1:4.6
1)
2)
PiSToN Ø
fiNAl EdiTioN
dESCRiPTioN
APPliCATioN
9.5
Special black lever blade, without decompression
lever, with safety start switch, big space 2)
KTM LC8
9.5
Special black lever blade, without decompression
lever, with safty start switch, big space 2)
in mm
Short lever blade, for brake fluid use only
Find clutch switch page 54
Increased distance for street bikes to allow enough space for switchgear unit.
Only for mineral oil!
fiNAl EdiTioN
163 ls* HYdRAUliC ClUTCH
MASTER CYliNdER
*ls | black painted surface
oRdER CodE
ModEl
0020582 B
Lever ratio | 1:4.6
1)
2)
PiSToN Ø in mm
9.5
dESCRiPTioN
APPliCATioN
Long black lever blade,
without decompression lever
Cannondale ATV
Find clutch switches page 54
Increased distance for street bikes to allow enough space for switchgear unit
39
163 HYMEC | MASTER CYLINDER
163 HYMEC | SLAVE CYLINDER
Slave cylinder
seal-kits not available
as spare parts!
40
HYdRAUliC MASTER CYliNdERS ANd SPARE PARTS foR BRAkE SYSTEMS
163 HYMEC | SPARE PARTS
PoSiTioN
dESCRiPTioN
iTEM CodE
1
Master cylinder*
Page 39
2
Clamp with spiral spin
Clamp for threaded mirror mounting M 10x1.25 mm
Clamp schwarz for threaded mirror mounting M 10x1.25 mm
0720546
0720543
0722026 B
3
Adjuster wheel for lever, red (packaging unit 10 pcs.)
0720572
4
Protection cover for lever
0429633
5
Long lever blade with accessories and coil spring
l = 147 mm
Short lever blade with accessories and coil spring
l = 123.5 mm
Special lever blade f. master cylinders with bigger space l = 152 mm
0720598
0720600
0722021
6
Screw for lever
0720504 B
7
Deco lever black
Choke lever black
Choke lever red
0720552
0722118
0722312
8
Cover without deco-/choke lever
Cover with thread for deco lever
Cover with hole for deco lever
Cover for choke lever
Cover black without deco-/choke lever
0720544
0720553
0720559
0722139
0720500 B
9
Reservoir membrane for mineral oil
Reservoir membrane for DOT
0720560
0429560
10
Master piston Ø
0722027
0720555
0720499
0723293
0720525
20
Slave cylinder
Pages 22/23
21
Cap bronze anodised
Cap with stud bronze anodised
0430217
0430998
22
Tubekit PA with accessories
Tubekit PA with accessories
23
banjo bolt with bleeding valve for carbon tubings M 6x16.5 mm
0722136
24
Sleeve
0412310
25
Disc
0451530
26
0430985
0430987
27
O-ring (needed for sleeve 0430985 and 0430987)
0488255
28
Mounting adapter Honda CRF 450 R, model year 2004
Mounting adapter Suzuki RM-Z 250, Kawasaki KXF 250
Mounting adapter Kawasaki KX 450 F, model year 2006
0430220
0430240
0430997
29
Support
0430224
30
MAGURA-Blood 100 ml
MAGURA-Blood 1 Liter
Service-Kit HYMEC
0721820
0721821
0722152
9.0 mm
9.5 mm
10.5 mm
9.5 mm
10.5 mm
mineral oil
mineral oil
mineral oil
DOT
DOT
l = 1.045 mm
l = 1.120 mm
l = 1.045 mm
l = 1.500 mm
0720549 B
0722137
0722138
0722679
30
* If the master cylinder with decompression lever or choke lever is required, you have to
order additionally Pos. 8 and Pos. 7.
41
750 RADIAL SUPERMOTO
Spare parts for the radial pump on page 13
KTM only!
MODEL
MODEL
YEAR
FORKLEG
DISC
HONDA
CRF 450
CRF 450 R, CRF 250 R
CRF 450 R, CRF 250 R
2003–2004
2005–2008
2009
0722144 B 0722216 B 0723229 B 0722155 B 0722155 B 0722155 B HUSQVARNA
TC-TE 250
TC-TE 450/510, TE 450/510,
SM 450 R, 510 R, 610
TC-TE 450/510, TE 450/510,
SM 450 R, 510 R, 610
TC-TE 250, TC-TE 450/510,
TE 450/510, SM 450 R, 510 R, 610
2005–2007
2006
2006
2007
2007
2008–2009
2008–2009
0722145 B 0722313 B 0722313 B 0722313 B 0722313 B 0722313 B 0722313 B 0722156 B 0722156 B 0722156 B 0722156 B 0722156 B 0722156 B 0722156 B KAWASAKI
KX 450 F
KX 450 F
KX 450 F
2006
2007–2008
2009
0722304 B –
–
0722303 B 0722303 B 0722303 B 2004–2005
2004–2005
2004–2005
2004–2005
2004–2005
2004–2005
2004–2005
2006
2006
2006
2006
2006
2007
2007
2007
2008
2008
2008
2008
0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0722143 B 0723030 B 0722143 B 0722143 B 0723030 B 0722143 B 0723030 B 0723030 B 0723030 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B 0722154 B SUZUKI
RM-Z 450
RM-Z 450
2006–2007
2008–2009
–
0723236 B 0722305 B 0722305 B YAMAHA
YZ 450 F
2009
0722188 B 0722186 B KTM | Husaberg
250 SXF, 400 EXC, 450 EXC
450 SMR, 450 SX, 425 EXC
525 SX, 560 SMR, 625 SMC,
625 SXC, 640 LC4 Enduro
640 LC4 Supermotard, 660 SMC
all Husaberg
USA: 250 XC-W, 300 XC-W
250 SXF, 400 EXC, 525 EXC
525 SX, 560 SMR, 660 SMC
all Husaberg
USA: 250 XC-W, 300 XC-W
450 SXF
250 SXF, all Husaberg
USA: 250 XC-W, 300 XC-W
450 SXF, 505 SXF
all Husaberg
250 SX, 250 SXF, 450 SXF
505 SXF
USA: 250 XC-W, 300 XC-W
42
Example for forkleg 750
Radial forkleg
Weight | approx. 530 g
Caliper clamp gap | 100 mm
Brake disc
Diameter | 320 mm
Design principle | floating (aluminium inner ring)
Thickness | 4 mm
Weight | 990 g
Use ONLY DOT5.1
HYDRAULIC MASTER CYLINDERS AND SPARE PARTS FOR BRAKE SYSTEMS
4
770 RADIAL TWIN-DISC BRAKE SYSTEM
7
1
5
8
3
6
KTM only!
2
10
Use ONLY DOT5.1
9
POSITION
MODEL
ORDER CODE
Reservoir 195.55 z
DESCRIPTION/
APPLICATION
Capacity 16 ml,
for DOT4/5.1 brake fluid
only
1
2
Brake pads set 770.2
2 pcs, sinter-race
0722689 B 3
Brake disc 770.50 z
Brake disc 770.1 z
KTM 04 right, 270 mm
KTM 04 left, 270 mm
0722693 B 0722692 B 4
Forkleg 770.4 ef
Forkleg 770.54 ef
Honda 05, left
Honda 05, right
0722690 B 0722691 B 5
Forkleg 770.4
Honda 07, triple clamp
190 mm
0723022 B 4
Forkleg 770.1 ef
Forkleg 770.50 ef
Yamaha 05, left
Yamaha 05, right
0722680 B 0722681 B 5
Distance bushing 770.1
Yamaha 07
0723020 B 4
Forkleg 770.2 ef
Forkleg 770.52 ef
KTM 04, left, cartridge
KTM 04, right, cartridge
0722682 B 0722683 B Forkleg 770.3 ef
Forkleg 770.53 ef
KTM 04, left, open
KTM 04, right, open
0722684 B 0722685 B 5
Distance bushing 770.2
KTM 190 mm
0723021 B 6
Brake line 770.1
Length 1,185 mm and
1,250 mm, stainless
steel braided
0722708 B 7
Mounting-kit
Bolt and 2x splint
0723056 B 8
Seal kit 770
–
0723067 B 9
Piston caliper 770
–
0723065 B 10
Spacer ring 4 mm
Spacer ring 2.5 mm
KTM only!
KTM only!
0722190 B 0722191 B 2700786
43
90 YEARS
of TRAdiTioN
ClASSiCS
MAGURA.COM
73 SPoRT BRAkE lEVER
Sport brake lever for mechanical brakes (drum brakes). Light weight
forged alloy black split perch clamp and polished Eurostyle ball-end blade,
160 mm long, Ø 8.2 mm hole for rearview mirror.
oRdER CodE
ModEl
dESCRiPTioN/APPliCATioN
ACCESSoRiES
0116933
B-lever 73.2
Thread 1/4" for brake light switch (0128496)
Nipple barrel, solder nipple, adjusting screw
and protective cap
Technical data: Cable pull 20 mm | thread M7 for adjusting screw
73.202 SPoRT BRAkE lEVER dUAl PUll
Sport brake lever for mechanical brakes (twin drum brakes). Light weight
forged black split perch clamp and polished ball-end lever, 160 mm long,
Ø 8.2 mm hole for rearview mirror.
oRdER CodE
ModEl
ACCESSoRiES
0116934
B-lever 73.202
Dual-cable pull, with equalizer, to operate two
drum brakes
Solder nipple
Technical data: Cable pull 20 mm | thread M7 for adjusting screw
74 SPoRT ClUTCH lEVER
Sport clutch lever, light weight forged alloy black split perch clamp and
polished, Eurostyle ball-end blade, 160 mm long, Ø 8.2 mm hole for rearview
mirror.
oRdER CodE
ModEl
ACCESSoRiES
0116940
C-lever 74.1
Cable pull 20 mm at 3.9 ratio, HUSQVARNA, KTM,
MAICO etc.
Nipple barrel, solder nippel, adjusting screw
and protective cap
0116941 B
C-lever 74.1
As above except black anodized blade
Nipple barrel, solder nipple, adjusting screw
and protective cap
Technical data: Various cable pull at different ratios. See descriptions lefthand Thread M7 for cable adjusting screw
PRoTECTioN CAPS SET
Protection caps set for 73 Sport brake lever
and 74 Sport clutch lever
46
oRdER CodE
ModEl
0735083
Protection caps set
73/516 ksz
Protection caps set for 73 Sport brake lever
and 74 Sport clutch lever
ACCESSoRiES
ClASSiCS
101 ClUTCH lEVER
Clutch lever with clamp for tube-Ø 22 mm, with thread M 6 for adjusting
screw or supporting hole Ø 6.5 mm for cable.
oRdER CodE
ModEl
ACCESSoRiES
0117380
C-lever 101.2.9
Black shank with thread for adjusting screw,
black fibre reinforced lever blade, SPARTA
Adjusting screw, barrel, nipple
0117421
C-lever 101.4.8
Black shank with thread for adjusting screw,
polished aluminium lever blade with stop notch
Barrel, nipple, s-nipple
0117496
C-lever 101.7.9
Black shank with supporting hole and thread for
switch, black fibre reinforced lever blade with pull
back spring, PUCH, TOMOS
Barrel, nipple
0117514
C-lever 101.8.9
Black shank with thread M 6 and thread for switch,
black fibre reinforced lever blade with pull back
spring
Adjusting screw, barrel, nipple
Technical data: Cable pull | 18 mm, length of lever blade 125 mm, blade with ball end Ø 18 mm
103 BRAkE-/ClUTCH lEVER WiTH
dECoMPRESSioN lEVER
Double-shank for brake lever and starting clutch lever with clamp,
hole Ø 8.1 mm for rear-view mirror, black fibre reinforced starting clutch
lever blade.
oRdER CodE
ModEl
ACCESSoRiES
0118771 B
B/C-lever 103.21.8
Black shank with supporting hole Ø 6.5 mm,
black fibre reinforced lever blade
Barrel, nipple
0118778 B
B/C-lever 103.21.8
Black shank with supporting hole Ø 6.5 mm,
–
Technical data: Cable pull | brake lever blade 18 mm, start lever blade 15 mm
108 BRAkE lEVER
Brake lever righthand for tube-Ø 22 mm, cable supporting hole,
alloy lever blade or reinforced fibre lever blade.
oRdER CodE
ModEl
0119570
B-lever 108.4.9
Righthand, black fibre reinforced lever blade, thread for brake light switch, pull back spring, supporting
hole
Technical data: Cable pull | 18 mm
dECoMPRESSioN lEVER
Decompression lever, shank Ø 22 mm with supporting hole Ø 6.7 mm,
cable fixing with clamp screw, cable pull 16 mm
oRdER CodE
ModEl
0011370
Lever 12
Decompression lever, shank Ø 22 mm with supporting hole Ø 6.7 mm, cable fixing with clamp screw,
cable pull 16 mm
Technical data: Cable pull | 16 mm
47
225 HYdRAUliC BRAkE ANd ClUTCH lEVER
Features and benefits
Hydraulic brake and clutch lever, black painted housing with a (22 mm)
clamp, polished alloy lever, thread for brake light switch and hole Ø 8.1 mm
or thread M 8 for rear-view mirror, thread M 10 x1, plastic brake fluid
reservoir. Obtainable as righthand and lefthand model.
Fitting brake and clutch switch see No. 19/20 page 56.
oRdER CodE
ModEl
PiSToN Ø in mm
RH
0122000
B-lever 225.2
13
Polished lever, hole-Ø 8.1 mm for mirror
0122020
B-lever 225.4
16
Hole-Ø 8.1 mm for mirror
lH
0122110
K-lever 225.52
13
Polished lever, hole-Ø 8.1 mm for mirror
0122130
K-lever 225.54
16
Hole-Ø 8.1 mm for mirror
Technical data: Stroke | 12 mm
234 THRoTTlE TWiST GRiP WiTH MECHANiC BRAkE
One cable pull with brake lever blade and integrated choke lever blade for
F & S-wheel hub engine, black painted housing with thread for adjusting
screw, black fibre reinforced lever blade.
oRdER CodE
ModEl
ACCESSoRiES
0100270 B
Throttle twist grip
234.3.9
Without pull back spring in the grip tube,
SACHS (Sachsonette)
Barrel, nipple, s-nipple, solder nipple
Technical data: Cable pull | throttle 18 mm, brake 15 mmm choke up to 1:16 mm, total 27 mm
Rotation pulley throttle twist grip with alloy or fibre reinforced brake lever
blade, one cable pull, closed housing (possibility for outer cable attachment),
with pull back spring inside the grip tube.
oRdER CodE
ModEl
VERSioNS WiTHoUT
dECoMPRESSioN
lEVER BlAdE
0101541 B
Throttle twist grip
270.9.8
0101550 B
Throttle twist grip
270.9.9
Throttle twist grip
0101590 B
270.11.9
0101591 B
VERSioNS WiTH
dECoMPRESSioN
lEVER BlAdE
0101821 B
0102133 B
Throttle twist grip
270.11.9
Throttle twist grip
270.52.8
Throttle twist grip
270.66.9
ACCESSoRiES
Black housing with thread for brake light switch,
polished alloy lever blade, KTM
black fibre reinforced lever blade, SACH
Black housing with thread for brake light switch
and adjusting screw, black fibre reinforced lever
blade, without pull back spring inside the grip
tube, nobbed grip, SACHS
As above, but grip with longitudinal rips, SACHS
Black housing, pull back spring and decompression
lever blade, KTM, SACHS, SPARTA, MONARK
Barrel, nipple, s-nipple, solder nipple
Technical data: Cable pull | throttle 26 mm at a rotation of 92°, brake 18 mm
48
Barrel, nipple, s-nipple, adjusting screw
Barrel, nipple, s-nipple, adjusting screw
ClASSiCS
Straight pulleye throttle twist grip with brake lever blade, one cable pull
(possibility for outer attachment), black painted housing with supporting hole
Ø 6.5 mm or adjusting screw for cable, polished alloy lever or fibre reinforced
lever blade with or without pull back spring, sliding clamp for screwing or for
solder nipple.
oRdER CodE
ModEl
ACCESSoRiES
0123953
Throttle twist grip
273.6.8
sliding clamp, PUCH
Barrel, nipple
0123954
Throttle twist grip
273.6.8
As above, but without accessories
–
0124225 B
Throttle twist grip
273.56.8
supporting hole, pull back spring, sliding clamp for
solder nipple, grip with longitudinal rips, PUCH
–
Technical data: Cable pull | throttle 21 mm at a rotation of 104°, brake 18 mm
307 THRoTTlE TWiST GRiP
Outer pulley throttle twist grip, single cable pull, straight cable up to 38 mm
stroke, polished aluminium housing with trap door cover and adjusting screw
for twist regulation, cable protection cover.
oRdER CodE
ModEl
ACCESSoRiES
0125600 B
Throttle twist grip 307.1
For general using
Solder nipple, grub screw, cable protection cover
0125821 B
Total stroke 84 mm at a rotation of 220°,
special model for vehicles of handicapped bikers
Solder nipple, grub screw, cable protection cover
Technical data: Total stroke | 46 mm at a rotation of 115° for handlebars Ø 22 mm and 7/8"
Throttle twist grip, one cable pull, with big rotation, two part housing of
reinforced poly-carbon, protective sleeve.
oRdER CodE
ModEl
ACCESSoRiES
0126003
With grip “Street”, SIMSON, SACHS, KTM,
ZÜNDAPP
Cable support, cap, solder nipple
Technical data: Total stroke | 50 mm at a rotation of 213°
49
Motocross throttle twist grip with single cable, parallel pull. DUO-set tings
(Motocross or Enduro). Cable routed over roller for ease of pull.
Black reinforced poly carbon housing, pro-grid rubber grip, quick and easy
cable change, without removing housing. Can be changed to enduro setting.
oRdER CodE
ModEl
ACCESSoRiES
0730218
Twist grip set 314/029
In Motocross setting, with matching left grip
Solder nipple, rubber cable cover
Technical data: Total stroke | 48 mm at a rotation of 103°/91°
317 ElECTRiC THRoTTlE TWiST GRiP
Housing made of glass-fibre reinforced plastics for tube-Ø 22 mm. Overall
lenght 150 mm, max. current-carrying capacity 1 Watt, resistor and range
of control of the potentiometer see below. Outer diameter of connection
cable-Ø 6 mm, cable up to 3 seeles.
oRdER CodE
ModEl
0026471 B
Throttle twist grip/
Poti 317.2
5 kOhm-potentiometer, working rate 0–5 kOhm, cable length 800 mm
0026474 B
Poti 317.4
5 kOhm-potentiometer, working rate 0–5 kOhm, cable length 1800 mm
0026479 B
Poti 317.9
5 kOhm-potentiometer, working rate 0–5 kOhm, cable length 225 mm, with Molex-plug, for MuZ-Scooter
“Charly”
Technical data: Rotation angle 75°
682 2-GEAR-SHifT HANdlE GRiP
2-gear-shift handle grip, combinated clutch lever, black painted housing
with cable guide and cable adjusting screws, grip tube with cable adjusting
screws, one or two cable pull.
oRdER CodE
ModEl
ACCESSoRiES
0129912 B
Gear-shift handle grip
682.2.8
Shift 7.5 + 8, clutch cable pull 18 mm, lever blade
with stop notch, nobbed grip, SACHS
Barrel, nipple, solder nipple, adjusting screws
0129918 B
682.2.8
Shift 7.5 + 8, clutch cable pull 18 mm, lever blade
with stop notch, nobbed grip, SACHS
–
0130139 B
682.17.9
Shift 7+ 7, clutch cable pull 18 mm, black fibre
reinforced lever blade, grip with long gated ribs,
PUCH, SOLIFER, TUNTUR
0130260 B
682.201.9
Shift 7.5 + 8, clutch cable pull 14.5 mm, black fibre
reinforced lever blade, nobbed grip, SACHS
Technical data: Clutch cable pull 18 mm or 14.5 mm shift 1.+ 2. gear shown in the model description
50
ClASSiCS
683 3-GEAR-SHifT HANdlE GRiP
3-gear-shift handle grip, combinated clutch lever, black painted housing with
cable guide and cable adjusting screws, one or two cable pull.
oRdER CodE
ModEl
ACCESSoRiES
0130470 B
683.1.9
Shift 6 + 5.3 + 8.7, clutch cable pull 18 mm,
black painted housing, black fibre reinforced
lever blade, nobbed grip, SACHS
0130720 B
683.17.9
Shift 4.5 + 4.5 + 9, clutch cable pull 18 mm, black
painted housing, black fibre reinforced lever blade,
grip with long gated ribs, PUCH, MONARK,
SOLIFER, TOMOS
0130830 B
683.22.9
Shift 5.5 + 5.5 + 11, clutch cable pull 14.5 mm,
black fibre reinforced lever blade without
bracket, grip with long gated ribs, ZÜNDAPP
0131035 B
683.201.9
Shift 6 + 5.3 + 8.7, clutch cable pull 14.5 mm, black
painted housing, black fibre reinforced lever blade,
nobbed grip, F & S-motors 505/3-gear, SACHS
Technical data: Clutch cable pull 18 mm or 14.5 mm shift 1.+ 2.+ 3. gear shown in the model description
700 MASTER BRAkE CYliNdER
Master brake cylinder for foot controlled rear disc brakes, tubing fitting
M 10x1 to the brake caliper, without brake fluid reservoir, fitting for tubing
connection to an external brake fluid reservoir.
oRdER CodE
ModEl
PiSToN Ø in mm
0131411
Master brake cylinder
16
Chrome painted housing, EML, KTM
Technical data: Stroke | 12 mm
51
ACCESSoRiES
100% PERfoRMANCE
100% PRECiSElY fiTTiNG
100% flEXiBlE
100% MAGURA-QUAliTY
ACCESSoRiES
Z01 HYdRAUliC ACCESSoRiES
oRdER CodE
ModEl
CARBoN
TUBiNGS
0722138
0722137
0722136
Carbon tubing kit
Carbon tubing kit
Banjo bolt
For HYMEC, length 1,045 mm
For HYMEC, length 1,120 mm
With bleeding valve M 6x16.5 mm for HYME
STEEl BRAidEd
HoSES
0722146
Steel braided hose
0722004
0722005
0722015
0722016
0722023
0722057
0306956
0720505
Steel braided hose
Steel braided hose
Steel braided hose
Steel braided hose
Steel braided hose
Steel braided hose
Steel braided hose
Banjo bolt
0721786
0721789
Banjo bolt
Banjo bolt
For MAGURA Brake System 750.1,
length 1,185 mm, DOT
Length 1,025 mm
KTM 4-Stroke Racing, length 975 mm
KTM LC8, length 1,140 mm
KTM LC4, length 1,025 mm
Husaberg, length 1,020 mm
KTM 250/380, length 970 mm
KTM 2-Stroke 125/200, length 970 mm
To fix the clutch tubing with thread M 10x1,
inclusive bleeding screw
For single brake line, without bleeding valve, M 10 x1
For two line fittings, M 10 x1
0722136
0720581
PA-tubing kit
PA-tubing kit
PA-tubing kit
PA-tubing kit
PA-tubing kit
PA-tubing
Olive/packing unit
10 pcs.
Sleeve screw/
packing unit 10 pcs.
Banjo bolt
Protection tube
Length 1,025 mm
With protection tube, length 1,045 mm
KTM 65/85 SX, with protection tube, length 910 mm
KTM 4-Stroke Racing, length 975 mm
For HYMEC, length 1,500 mm, shortable
5 m without accessories
To fix the clutch tubing in the sleeve screw
0720548
To connect the clutch tubing
and the master cylinder, M 10x1
For HYMEC-versions with PA-tubing
For all MAGURA PA-tubing kits
SERViCE-kiTS
0722152
Service-Kit HYMEC
0721820
0721821
MAGURA-Blood 100 ml
MAGURA-Blood 1 liter
Contains everything you need
to refill MAGURA’s HYMEC
High-quality hydraulic oil based on mineral oil
High-quality hydraulic oil based on mineral oil
1
2
3
4
5
6
7
8
9
10
1
2
1
6
5
7
PA-TUBiNGS
0131890
0131893
0131894
0720551
0722679
0431863
0720308
8
0720548
4
3
9
10
10
53
Z02 GRiPS, PAiRS of GRiPS
oRdER CodE
11
PAiR of GRiPS
0720850
12
0720851
13
0720853
14
0720854
15
0720855
16
0720856
17
0720920
18
0720032
11
12
13
14
ModEl
lENGTH
150 sz*/151 sz*
for tube Ø 25/22
125 sz*
for tube Ø 25/22
312 szw*
for tube Ø 25/22
250 ksz*
for tube Ø 25/22
289 tsz*
for tube Ø 25/22
250 ksz* for tube Ø 25,
bead Ø 48
316 ksz*
for tube Ø 25/22
DAB6 szfor tube Ø 27.5
BMW/5-models and older
129
For Oldies and especially for Trial
125
Special grip for Off-Road
125
For mopeds with automatic engines
114
Our soft grip for street bikes
including BMW C1
Mopeds with gear grip
126
Grip for scooters
116
Oldie grip for Heinkel Roller VE 10
120
in mm
116
15
Z03 SWiTCHES
16
17
oRdER CodE
ModEl
18
0128496
Switch 558.61
19
0128500
Switch 558.12
20
0128510
Switch 558.51
21
22
0306938
0550993
Switch 163 B
Switch 558.34
23
0723199
0420380
Switch 701
Protection cover 558
24
0722014
Clutch switch 163
25
0722102
0722213
0723187
0723197
Switch 195
Switch 195
Clutch switch 167
Brake light switch 167
0723123
Brake light switch 167
On in paused position, white pusher, micro-switch
with spring, for thread 1/4"
Off in paused position, black pusher,
for thread 1/4", start safety switch
for MAGURA-model 163
On in paused position, pluggable, blue pusher, for
MAGURA-models 116/117, for Suzuki and Simson
scooters
For Yamaha XT 660 – HYMEC, cable length 620 mm
On in paused position, white pusher,
for thread M 8x1
Hydraulic brake light switch
For all switch models 558 small inner-Ø 3.6/
big inner-Ø 10.5
KTM-models LC 4 from 2003 and LC 8,
for thread 1/4", cable length 550 mm
For RADIAL 195 Clutch
For RADIAL 195 Brake, cable length 400 mm
For MAGURA model 167 (Clutch)
For MAGURA model 167 (ATV-Brake),
cable length 760 mm
For MAGURA model 167, cable length 400 mm
18
19
20
21
22
23
24
25
18
*
sz |
szw |
ksz |
tsz |
rubber black
rubber black, soft
fibre reinforced black
thermoplastic
elastomer, black
25
54
ACCESSoRiES
Z05 SoldER NiPPlES,
SoldER NiPPlE BARRElS
oRdER CodE
PACkiNG
UNiT
Z05 AdJUSTiNG SCREWS
diMENSioNS in mm
Ø width
length
hole
SoldER NiPPlE
BARREl
0720229
0720230
0720232
0720233
0720234
20
20
20
20
10
8
8
9
8
15,5
9/8
10/8,3 14,5
11,6
10
4
2,6
2,5
2,3
2,3
SoldER NiPPlE
0720237
0720240
0720241
0720242
0720243
0720246
0720248
0720249
0720250
20
20
20
20
20
20
20
20
20
6/3,5
6/3,5
6/3,5
6/3,5
3,2
6,5
6
5
8
13
8
8
8
5
4
5,5
7,5
9
2,3
2,3
2,0
1,8
1,8
1,8
1,8
1,8
2,3
Z05 NiPPlE ASSoRTMENT
oRdER CodE
PACkiNG
UNiT
diMENSioNS in mm
GUidE TUBE
0720276
10
–
–
6,5
3
UNSloTTEd
AdJUSTiNG SCREW
0720277
0720278
0720279
0720280
0720281
0720282
0720283
0720284
0720286
0720777
20
20
20
20
20
10
10
10
10
10
M5
M6
M6
M6
M6
M8
M8
M8
–
M10x1
27
32
41
30
38
36
36
36
31
44
5
6,8
6,1
6,1
6,5
10,2
8,2
7
6,5
11
2,5
2,8
2,5
2,5
2,7
4
4
4
3
6,2
SloTTEd
AdJUSTiNG SCREW,
WiTH kNURlEd
METAl NUT
0720288
0720289
0720291
0720292
0720776
10
10
10
10
10
M7
M7
M6
M6
M10x1
42
42
32
32
44
6,5
8,2
6,5
6,5
11
3,5
3,5
2,2
2,2
2,4
thread
length sleeve Ø cable Ø
Z07 dECoMPRESSioN lEVERS,
CHokE lEVERS …
oRdER CodE
oRdER CodE
ModEl
dESCRiPTioN/
APPliCATioN
0736500
A well sorted selection of 100 various
screw nipples, solder nipples and
nipple barrels in a very comfortable
plastic box. “A need in biker’s garage!”
CoNTRol
lEVER
0111370
12
0111524
14AL7
0114150
30.1
0110100
HA02-right
0110200
HB02-left
Decompression lever,
shank Ø 22 mm with
supporting hole Ø 6.7 mm,
cable fixing with
clamp screw, cable pull
16 mm
Left version, air-lever,
black painted, cable fix with
nipple, for Ø 22 mm
handlebars
Stroke 41 mm, single cable,
clamp fix, cable fixing
with solder nipple
For round pulley, single cable,
thread M 6 to screw onto a
tube-Ø 22 mm,
with solder nipple for cable
fixing
As above, but left version
lEVER
0114240
37.6
0550735
81.13
Z05 SCREW NiPPlES
oRdER CodE
SCREW NiPPlES
0720252
0720253
0720254
0720255
0720256
0720257
0720258
0720259
0720260
0720262
0720263
0720264
PACkiNG
UNiT
diMENSioNS in mm
Ø width
length
20
20
10
20
20
20
10
20
20
20
20
20
7
10,6
10,8
8
7
6
10
5
8
5
5,5
5,5
10,5/6,5
12,5
13
8,5
9
9
18
9,5
15
7,5
10
5,7
hole
2,4
2,5
2,8
2,5
2,5
2,5
3
2
2,3
2
2
1,8
As above, but with an extra
disc and spring washer
for more power control
Stroke 24 mm, right version,
for MAGURA-models 114,
115, 224
55
PARTNERS
56
PARTNERS
GERMANY
MAiN PARTNERS
MAGURA PRo SHoP dEAlER
20097 Hamburg
Joh. J. Matthies GmbH
Hammerbrookstraße 97
phone +49 (0)40 237210
fax +49 (0)40 23721363
[email protected]
www.matthies.de
66763 Dillingen/Saar
Motorrad Klein GmbH
Röntgenstr. 5
phone +49 (0)6831 73140
fax +49 (0)6831 701121
www.motorradklein.de
27318 Hoya
Herrmann Hartje KG
Deichstraße 120–122
phone +49 (0)4251 811172
fax +49 (0)4251 811179
[email protected]
www.hartje.de
53117 Bonn
Fa. Wieres
Otto-Hahn-Straße 71
phone +49 (0)228 989970
fax +49 (0)228 9899720
[email protected]
www.wieres.de
54332 Wasserliesch
Parts Europe GmbH
Conrad-Röntgen-Straße 2
phone +49 (0)6501 96951505
fax +49 (0)6501 96952650
[email protected]
www.partseurope.eu
82152 Planegg/Martinsried
Simon Hagl KG
Lochhammer Straße 29a
phone +49 (0)89 595009
fax +49 (0)89 553913
[email protected]
www.hagl-s.de
MofA-/MokiCk-PARTS
33649 Bielefeld
Steinkrüger & Becker
Erpestraße 57
phone +49 (0)521 947180
fax +49 (0)521 947184024568
97526 Schweinfurt-Sennfeld
E. Wiener Bike Parts GmbH
Max-Planck-Straße 8
phone +49 (0)9721 65010
fax +49 (0)9721 650173
[email protected]
www.bike-parts.de
ClASSiC-BikE-PARTS
24568 Kaltenkirchen
Ernst Weisswange
Hamburger Straße 73
Military motorcycles
phone +49 (0)4191 3326
fax +49 (0)4191 88091
[email protected]
www.weisswange-motorradteile.de
33649 Bielefeld
Steinkrüger & Becker
Erpestraße 57
Puch
phone +49 (0)521 947180
fax +49 (0)521 947184042899
42899 Remscheid
(Lüttringhausen)
Motorrad-Stemler GmbH
Garschager Heide 29
Adler, AWO, BMW, DKW,
EMW,Horex, IFA, NSU, Triumph,
Victoria, Zündapp, Steib
phone +49 (0)2191 53067
fax +49 (0)2191 590349
[email protected]
www.motorrad-stemler.de
60327 Frankfurt
Uli’s Motorradladen GmbH
U. Seiwert
Gutleutstraße 144
BMW
phone +49 (0)69 239319
fax +49 (0)69 233840
[email protected]
www.ulismotorradladen.de
64750 Lützelbach
Kurt Heumann
Hardtstraße 6
All classic bikes, as in A like Adler
to Z as in Zündapp
phone +49 (0)6165 912053
fax +49 (0)6165 912054
[email protected]
www.heumannzweirad.de
70806 Kornwestheim
Kreidler Dienst
Kurt Hellmuth
Aldinger Straße 2
Kreidler
phone +49 (0)7154 4686
fax +49 (0)7154 4657
[email protected]
www.kreidlerdienst.de
72336 Balingen
Bernhard Greiner
Am Bangraben 16
Motorcycles of the 50‘s
phone +49 (0)7433 15188
fax +49 (0)7433 6245
[email protected]
www.greiner-oldtimerteile.de
82152 Planegg/Martinsried
Simon Hagl KG
Lochhamer Str 29a
Zündapp
phone +49 (0)89 595009
fax +49 (0)89 553913
www.hagl-s.de
[email protected]
96120 Bischberg
Hilmar Gebhardt
Hauptstraße 43
Hercules
phone +49 (0)951 3029519
fax +49 (0)951 3029520
[email protected]
57
WORLDWIDE
International representatives and
distributors
Asia
MAGURA Asia Limited Co.
No. 9, Industrial Park 10th Road
Shi-Tun District
Taichung City, 40755, Taiwan
phone +886 4 23163388
fax +886 4 23599910
[email protected]
Australia
Distributor
100 % MX
Unit 15/69 Acacia Road
Ferntree Gully
AUS-3156 Victoria
phone +61 3 97536955
fax +61 3 97536966
[email protected]
www.shop100mx.com
Austria
Distributor
Ing. Hubert Knittel
Lastbergstrasse 41
A-3031 Pressbaum
phone +43 2233 4368314
[email protected]
Birner GmbH
Mühlgasse 91
2380 Perchtoldsdorf
[email protected]
[email protected]
phone +43(0) 18663921
fax: +43(0) 18697988
Belgium
Distributor
Rino Trading Company N. V.
Industriepark 29
B-2235 Hulshout
phone +32 15 228433
fax +32 15 230628
[email protected]
www.rinotrading.be
Czech Republic
Distributor
Motozloch
Písecká 1334
CZ-38601 Strakonice
phone +42 774455440
[email protected]
www.motozloch.cz
Estonia
Distributor
Krumera OÜ
Vahekoidu 1–2
Alliku küla
EST-76401 Saue vald
phone +37 25236795
[email protected]
58
Finnland
Distributor
Uimonen Trading OY
Kaskimäenkatu 7
SF-00021 Laskutus
phone +358 3 3565400
fax +358 3 2656700
info@tpuimonen.fi
www.tpuimonen.fi
Distributor
Oy Duell Bike-Center Ab
Kauppatie 19
FI-65610 Mustasaari
phone +358 63227500
fax +358 63222231
info@duell.fi
www.duell.fi
France
Representative
Jean-Michel Pfrimmer
2, Rue des Vergers
F-67450 Lampertheim
phone +33 3 88200864
[email protected]
Distributor
Seurat Puissance 3
Z.I.-21 Rue Jacques Germain
F-21420 Savigny lès Beaune
phone +33 3 80229668
fax +33 3 80223479
[email protected]
www.seurat3.fr
Distributor
Bihr S.A.S.
Z.I. Parc 3, 7 Rue Robert Schumann
F-68870 Bartenheim
phone +33 3 89703030
fax +33 3 89703099
[email protected]
www.bihr.eu
Greece
Distributor
Kafounis Motorsport
Achilleos 42–44–46
GR-10436 Athens
phone +30 210 5232605
fax +30 210 5226607
[email protected]
www.kafounis.com
Hungary
Distributor
X-Bike Borsay KFT
Csömöri út 157
H-1161 Budapest
phone +36 1 4056653
fax +36 1 4051378
[email protected]
www.x-bike.hu
PARTNERS
Indonesia
Tiara Sutan Motorsport
Puri Media Kempangan A11/48
Jakarta Barat
phone +62 21 58350059
fax +62 21 58350159
[email protected]
www.tiarasutan.com
Italy
Distributor
Motocross Marketing S.R.L.
Via G. Verdi, 26/A
I-21040 Carnago (VA)
phone +39 03 31991077
fax +39 03 31995583
[email protected]
www.motocrossmarketing.com
Japan
Distributor
MC International Inc.
Tadao Kiji
24–3, Enokicho, Suitashi
Nishi-ku
J-564-0053 Osaka
phone +81 663185000
fax +81 665360907
[email protected]
Netherland
Distributor
Ariete Holland
Hersel 5
NL-5715 PL Lierop
phone +31 492 332099
[email protected]
www.ariete.nl
Norway
Distributor
Kjell Berg A/S
Strandgaten 6
N-3960 Stathelle
phone +47 35 962111
[email protected]
www.kjell-berg.no
Poland
Distributor
Olek Motocykle
Ul. Szklana 17
PL-43300 Bielsko-Biała
phone +48 338101905
fax +48 334979551
[email protected]
www.olekmotocykle.pl
Portugal
Distributor
Bicimotor, LDA
Rua Visconde das Devesas, 128/132
P-4400-336 Vila Nova de Gaia
phone +351 222084124
fax +351 222008785
[email protected]
www.bicimotor.pt
Switzerland
Distributor
AZE Handels- u. Vertriebs AG
Sihlquai 278
CH-8031 Zürich
phone +41 44 2727611
fax +41 44 2711088
[email protected]
www.aze.ch
Russia
Distributor
STR Sprockets
Uritskogo 49a-64
Moscow Region
RUS-142602 Orekhovo-Zuevo
phone +7 4957492547
[email protected]
www.strsprockets.com
United Kingdom
Distributor
Venhill Engineering Ltd F
21 Ranmore Road
UK-Dorking, Surrey RH4 1HE
phone +44 1306 885111
fax +44 1306 740535
[email protected]
www.venhill.co.uk
Spain
Representative
Spinola & Perez
Lluis Forns Moncunill
Valencia, 587 5°1a
E-08026 Barcelona
phone +34 618669548
fax +34 932317731
[email protected]
www.spinola-perez.com
USA & Canada
Representative/Distributor
MAGURA USA Corp.
724 West Clem
Olney, IL 62450, USA
phone +1 618 395 2200
fax +1 618 395 4711
[email protected]
www.magura.com
Distributor
Diametral
Carrer Martorelles N.16
E-08170 Montornès del Vallès
(Barcelona)
phone +34 93 5723516
fax +34 93 5683628
[email protected]
www.diametral.es
Distributor
Hesperia Internacional S.l
C/Haya, 7
Pol.Ind.Aguacate
Es-28044 Madrid
phone +34 915088830
www.hesperiainternacional.com
[email protected]
Sweden
Distributor
Cross Center International AB
Box 11
S-56621 Habo
phone +46 36 46664
fax +46 36 41656
[email protected]
www.cross-center.com
Primary Distributors
MAGURA products are distributed
through several smaller wholsalers,
please ask MAGURA USA to find out
if your favorite distributor handles
MAGURA motorcycle products.
Tucker Rocky Distributing
4900 Alliance Gateway Freeway
Fort Worth, TX 76177, USA
[email protected]
www.tuckerrocky.com
Parts Unlimited/Le Mans
PO BOX 5222
Janesville, WI 53547, USA
phone +1 608 7581111
fax +1 608 7581634
www.parts-unlimited.com
www.partseurope.eu
Western Power Sports, Inc.
601 East Gowen Road
Boise, ID 83716, USA
phone +1 800 9993388
fax +1 208 3758901
Distributor
Nord Delar AB
Kämpevägen 26
S-55302 Jönköping
phone +46 36 390995
fax +46 36 393895
[email protected]
www.norddelar.se
59
PoWERSPoRTS 2015
Find us on Facebook:
/magurapassionpeople
Gustav Magenwirth
GmbH & Co. KG
Stuttgarter Straße 48
72574 Bad Urach, Germany
[email protected]
MAGURA Bike Parts
GmbH & Co. KG
Eckisstraße 6
72574 Bad Urach, Germany
[email protected]
© MAGURA, 2,000 | All rights reserved
Printed in Germany | 2600235, 04.2015
Layout and design: topdesign | werbeagentur Waiblingen
Specifications are subject to change without prior notice.
MAGURA.COM
MAGURA USA Corp.
724 West Clem
Olney, IL 62450, USA
[email protected]
MAGURA Asia Limited Co.
No. 9, Industrial Park 10th Road
Shi-Tun District
Taichung City, 40755, Taiwan
[email protected]

magura.com english

Transcription

Similar documents

M A G U R A 2 013 P O W ER S P O R TS EN G LISH

Magura Powersports Catalogue

doWNloAd

d15 piston

Kultur und Canapées siegen über »Daisy

controls