Lighting Upgrade Manual

Lighting
Upgrade Manual
November, 2014
LSI
> Experience the Difference
Why You Should Consider Upgrading Your Lighting
You can reduce your total cost of ownership
significantly by upgrading your lighting to LED with
LSI. From the parking lot throughout the site, LSI has
a broad offering of high performance, energy efficient
LED lighting solutions to fit your requirements.
With an LED lighting solution, LSI can dramatically
improve the appearance of your site efficiently and
economically 24 hours a day – 7 days a week.
Don’t forget – over a 10-year period, the capital cost
of your lighting package will only be 10% of the total
cost of ownership. The balance, 20% installation/
maintenance and 70% energy are your greatest cost
of ownership. By investing in an LED upgrade with
LSI, this balance of 90% will be significantly reduced.
What a Lighting Upgrade Means to You
By bringing your current lighting to today’s new LED standards
without adding additional fixtures you will enjoy –
Greater marketing impact due to long-range visibility which draws
customers to your site
Improved safety to customers and employees which means greater
sales and reduced employee turnover
With the white LED light source not only is overall ‘seeability’
improved but LEDs work very well with security and surveillance
video cameras to create an even greater sense of safety.
Increased vertical illumination making the overall site brighter and
more inviting
Building Walls
Fascia
Pump Faces
Entrance/Exit Areas
Column Cladding
Parking Lot
Spanners
Improved lighting and seeability using less energy
Color consistence from all fixtures
1
© 2014 LSI Industries Inc.
Scottsdale® (SC/SCF) - Encore® (EC) - Encore Top Access (ECTA)
Remove Current Fixture
16” Deck Pan
Leaves 4” Round Hole
12” Deck Pan
Leaves 4” Round Hole
Scottsdale (SC)
(Single deck only)
Remove Current Fixture
16” Deck Pan
Top Filler Plate w/Adhesive &
Bottom Decorative Panel Kit
P/N 525946CLR(specify color)
Leaves 9” Round Hole
TOP
PAN
BOTTOM
PAN
Scottsdale
Flat Lens (SCF)
12” Deck Pan
Top Filler Plate w/Adhesive &
Bottom Decorative Panel Kit
P/N 530281CLR(specify color)
Leaves 9” Round Hole
TOP
PAN
Encore
Top Access (ECTA)
(Single deck only)
BOTTOM
PAN
Remove Current Fixture
16” Deck Pan
Top Filler Plate w/Adhesive &
Bottom Decorative Panel Kit
P/N 525946CLR(specify color)
Leaves 12” Round Hole
TOP
PAN
BOTTOM
PAN
Encore
Bottom Access (EC)
(Single or Double Deck)
2
© 2014 LSI Industries Inc.
Upgrading to LegacyTM (CRU & CRUS) LED Canopy Solution
SC
HO
CRU or LED or CW UE CLR (specify color)
AC
VHO
SC
AC
CRUS or LED
SCDL*
VLW
LW
or CW UE CLR (specify color)
SS
*Scottsdale Drop Lens available in LW and SS drive currrent.
CRU
CRUS
CRUS SCDL
3
© 2014 LSI Industries Inc.
2 x 2 Surface Mount
Current Fixture
Leave Existing Housing
LSI: Masters/Dakota®
Whiteway: Riviera
23 "
Side View
10" 8"
19 3/8 "
LSI Masters/Dakota®
Jet-Phillips: Houstonian (Old Style)
23 "
8"
Side View
11"
19 3/8 "
Whiteway Riviera
Jet-Phillips Houstonian (Old Style)
Whiteway: Riviera II, Thunderbird,
Vision
Remove Existing Housing
(Single Deck Only)
21 1/8 "
10" 8"
Retrofit Kit
19 3/8"
Fixture
Jet-Phillips: Houstonian
(Current Style) SHO/RHO
23 "
8" 10"
Side View
Jet-Phillips Houstonian
19 3/8 "
Guardian MC-1411
21 1/8 "
8" 10"
Side View
19 3/8 "
Guardian MC-1411
Cooper CLS
Blanking Panel Available
21 3/4 "
Side View
P/N 357282 - Kit DA/MA to Blank Panel
8 1/4"
10 1/4"
19 3/8 "
P/N 1320540 - Kit DA to SC Plugs (25 units)
Cooper CLS
2x2 already installed with Scottsdale SSK SuperKit
can be upgraded to Crossover LED CRUK UNV.
4
© 2014 LSI Industries Inc.
Upgrade to LegacyTM LED SuperKit (CRUK UNV OR CRUSK UNV)
SC
HO
CRUK UNV or LED or CW UE CLR (specify color)
AC
VHO
SC
AC
CRUSK UNV or LED
SCDL*
CRUK
VLW
LW
or CW UE CLR (specify color)
SS
*Scottsdale Drop Lens available in LW and SS drive currrent.
CRUSK SCDL
CRUSK
P/N 357282 - Kit DA/MA to Blank Panel
P/N 1320540 - Kit DA to SC Plugs (25 units)
SC
HO
CRU or LED or CW UE CLR (specify color)
AC
VHO
CRU
SC
AC
CRUS or LED
SCDL*
VLW
LW
or CW UE CLR (specify color)
SS
*Scottsdale Drop Lens available in LW and SS drive currrent.
CRUS
CRUS SCDL
5
© 2014 LSI Industries Inc.
Recessed Rectangular
Current Fixture
LSI:
Richmond®
Leave Existing Housing
19 1/8"
9 3/8"
Whiteway:
Civic (current model)
8 9/16"
18 1/2"
LSI Richmond ®
Series
Whiteway: Civic
(Current Model)
Whiteway:
Civic (old model)
Blanking Panel Available
P/N 354702
8 5/16"
17 1/2"
Jet-Phillips:
Recessed Icon (original model)
9"
18 1/16"
Whiteway: Civic Jet-Phillips
(Old Style)
Recessed Icon
(Original Model)
6
© 2014 LSI Industries Inc.
Upgrading to LegacyTM LED SuperKit (CRUK RECU OR CRUSK RECU)
SC
HO
CRUK RECU or LED or CW UE CLR (specify color)
AC
VHO
SC
VLW
AC
LW
CRUSK RECU or LED or CW UE CLR (specify color)
SCDL*
SS
*Scottsdale Drop Lens available in LW and SS drive currrent.
CRUK RECU
CRUSK RECU
CRUSK RECU SCDL
1 - Rectangular recessed housings already installed with Scottsdale SSK SuperKit
can be upgraded to Crossover LED CRUK RECU OR CRUSK RECU.
7
© 2014 LSI Industries Inc.
Upgrade HID Area Lights to LED
Identify Current Fixture
Choose New Fixture
250 watt through 400 watt
HID fixtures
3” Drilling
Pattern
2-1/8”
(54mm)
CH2HM/CH2VM
XLCS/XLCM
CTM/CT2H/CT2V
XAMU
GFM/GBM1
PASU
XASU
5” Drilling
Pattern
4-5/8”
(117mm)
XCHM3
XPT3
XPTS3
XGBM LW/SS1
HE
1 - If existing GFM/GBM, then upgrade to LED version XGBM LW/SS by ordering new LED fixture
only – same mounting hardware & drilling pattern applies, no additional hardware needed.
750 watt through 1000 watt
HID fixtures
5” Drilling
Pattern
CHH/CHV
4-5/8”
(117mm)
XGBM HO2
GBL/GFL/
GBR/GFR2
XSB3
2 - If existing HID GFR/GFL/GBR/GBL, then upgrade to LED version XGBM
HO by ordering new LED fixture only – same mounting hardware & drilling
pattern applies, no additional hardware needed.
3 - RPP not needed for XSB
8
© 2014 LSI Industries Inc.
Required Mounting (in addition to fixture)
Identify Existing Pole
Existing Square Pole
4” round order X4RPP
5” round order X5RPP
Existing Round Pole
Existing Tenon Mount Pole
Existing Square Pole
Existing Square Pole
Specify Configuration
ie: S, D90, D180, T90, or Q90
4” square order 4ISF
5” square order 5ISF
4” round order 4RPP
5” round order 5RPP
Specify Configuration
ie: S, D90, D180, T90, or Q90
Order NM
4” square order 4ISF
5” square order 5ISF
Specify Configuration
ie: S, D90, D180, T90, or Q90
4” round order 4RPP
5” round order 5RPP
Existing Round Pole
Existing Tenon Mount Pole
Specify Configuration
ie: S, D90, D180, T90, or Q90
Order XNM
Existing Round Pole
Existing Tenon Mount Pole
Specify Configuration
ie: S, D90, D180, T90, or Q90
4” square order X4ISF
5” square order X5ISF
Order NM
9
RPP not needed
for XSB
Specify Configuration
ie: S, D90, D180, T90, or Q90
© 2014 LSI Industries Inc.
LSI Petroleum Lighting offers a number of LED solutions to
upgrade the rest of the exterior of your site.
Transitional Walkway
LSI LED bollards deliver good uniform illumination to light
walkways and sidewalks.
The LED XIG inground fixture is designed to light flags or
signage.
Soffit
LSI offers several LED solutions for soffit applications
– from continuous row building soffit strips to a more
traditional soffit fixture design. Depending upon your
soffit ceiling structure and lighting requirements, you can
get outstanding illumination while using considerably less
energy than a standard HID fixture.
Surface Mount
The Legacy Surface Mount is designed for applications
where mounting and servicing requirements necessitate
surface mount and access from below. It features the same
performance, energy saving and installation benefits as the
Legacy canopy solution.
Wall Pack
Choose from a number of LED wall pack fixtures that
deliver uniform lighting with full cutoff to create a brighter
environment at lower light levels. Optional motion
sensors are available for additional energy savings as well
as emergence options that meet NFPA Life Safety Code
requirements. These fixtures are ideal for entrance, egress
and security lighting requirements.
LED Linear Wall Wash / Fascia
The LWW is designed for seamless continuous row
mounting on an interior or exterior wall. High Lux LEDs
produce approximately 260 lumens at 3.5 watts per foot.
The LED wall wash is a highly dramatic and efficient means
of wall illumination.
The LWF is an efficient and easy system for constructing
continuous row building face lighting from above the top of
a fascia. Brilliant High Lux LEDs produce about 260 lumens
at 3.5 watts per foot.
10
© 2014 LSI Industries Inc.
Site #
Date:
Site Address
City, St, Zip
LED Retrofit Survey Form
General Site Information
Surveyors Name
Check each item as completed. Photos show overall context and entire site
Site Address Photo
Overall Site Photos (capture pole placement)
Canopy Dimensions
Canopy information
Quantity of 2' x 2' Boxes
Quantity of Richmonds
Quantity of 2' x 2' Upgrade
Quantity of Flat Lens
Scottsdale, Encore, BTM Access, Top Access
Quantity of Scottsdale
*
Note damage or non-working fixtures:
Wall Pack Lighting Fixtures
Quantity of Standard Wall Packs
Quantity of Decorative or Gooseneck
Quantity of Jar Light w/ INC
Quantity of other Fixture
Wall Pack photographed
in context of entire wall
Damage Photographed as needed
Flood Light Fixtures
Wall Mounted:
Quantity Single Head
Pole Mounted:
Quantity Single Head
Quantity Double Head
Roof Mounted:
Quantity Single Head
Quantity Double Head
Sign Mounted:
Quantity Single Head
Quantity Double Head
Quantity Double Head
Flood Light Fixtures photographed in context of entire wall
11
Damage Photographed as needed
© 2014 LSI Industries Inc.
Site #
Site Address:
LED Retrofit Survey Form
Pole Information
Area Light Pole Head
Mounting Method: Bolted Welded
Pole Detail
Aluminum Steel
Concrete
Qty Round
Qty Singles
Qty Round Tappered
Qty Doubles (D-90,DN-90,D-180)
Qty 4" SQ
Qty Triple (T-90, TN-90)
Qty 5" SQ
Qty Quad
Qty 6" SQ
Fixture type:
Wattage:
Pole Height- measure from the light to ground
Color:
Note damage, rust and obstructions for Area Light poles:
Survey Finalization
Survey Form Reviewed for
Accuracy
Site Photos Reviewed for 100%
Completion
Note any other site comments that are not captured elsewhere on this form:
12
© 2014 LSI Industries Inc.
Site #
Site Address:
LED Retrofit Survey Form
Site Plan Sketch
Include all fixtures, light poles, canopy dimensions and curbs in drawing.
Use a straight edge where possible and write legibly
All site plans must include dimensions of canopy, all lights identified on survey form, curbs showing
entrance/exit and general parking lot layout. Submit site plan as a separate file from survey pack.
13
© 2014 LSI Industries Inc.
10000 Alliance Road ◆ Cincinnati, Ohio 45242 ◆ (513)793-3200
4504 11/14 2500
Fax: (866)316-7126 ◆ www.lsi-industries.com
© 2014 LSI Industries Inc.