chrome - Lidor.pl
Transcription
chrome - Lidor.pl
CHROME FRONT END BRAKE COVERS ENGINE REAR END L I C E N S E P L AT E S 166 170 174 180 187 FRONT END deco eagle fender ornament True vintage styling of the 40’s & 50’s! Light weight ABS design & simple peel-&-stick application will have you back on the road in no time! Fits: Universal: Front Fenders with approximately 15-1/4" Radius Curve Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models Yamaha: V Star 650, 950, 1300 Models & Road Star Models (Not for Roadliner, Stratoliner or Raider) 7333 Deco Eagle Fender Ornament (ea) 39.99 $ Front Fender Spear Patent Pending Add a stunning little sparkle of chrome to your fender & catch everyone’s attention! Simply peel-&-stick! Measures 1-1/4" Wide x 8" Long. Fits: Universal: Front Fenders with approximately 15-1/4" Radius Curve Honda: VTX1800C/F, VTX1300C, Fury, VT1300 Custom Line Kawasaki: Vulcan 1700 Models, Voyager & Vulcan 900 Models Yamaha: V Star 650, 950, 1300 Models & Road Star Models (Not for Roadliner, Stratoliner or Raider) 7332 Front Fender Spear (ea) $ 24.99 make a bold statement! 9026 7340 9022 7344 triceptor fender accent front fender tip fender ornaments You decide where it looks best - as a tip or top fender accent. Peel-&-stick installation quickly adds some sparkle & covers unsightly stone chips. Protection & style for your front fender. Add this chrome accent & avoid or cover those ugly stone chips. With peel-&-stick installation, embellish the contours of your front fender quickly & painlessly. Let your front fender take on new life with one of our majestically sculpted fender ornaments. Fits: Honda: All VTX1300/1800 & VT1300 Custom Line Yamaha: All V Star 1300/1100/650, all Road Star, all Roadliner/Stratoliner, & Raider Universal: 4” or wider style fenders (does not fit fenders with flat center width) Fits: Honda: All VTX1800C/F, all VTX1300C & VT1300 Custom Line Yamaha: All V Star 1300/1100/650, all Road Star, & all Roadliner/Stratoliner & Deluxe Universal: 6” or wider style fenders (does not fit fenders with flat center width) 7340 Triceptor Fender Accent (ea) 166 $ 42.99 7344 Front Fender Tip (ea) Fits: Universal applications require drilling holes in fender & hard wiring for installation 9022 Wild Boar (ea) 9026 Eagle (ea) 3103 Replacement 59.99 $ $ 49.99 1.99 $ Bulb, #161 (ea) 32.99 $ W W W . K U R Y A K Y N . C O M 8684 BIKE MAPS 8684 G O L DW I N G 7823 C A N -A M SPORT BIKE Caliper Cover pg 170 7823 LIGHTING AC C E S S O R Y MOUNTS lower fork skins for vtx1800 brake line accent covers for vtx1800 Cover those bare stamped brackets holding your front brake lines to the forks with some blood grooved chrome. Create a shining first impression! Whether parked or in motion, your front end is often the first thing people notice on your bike. Show it in it’s best light with these attention grabbing chrome Lower Fork Skins. Used alone or with our other chromed front end components, they will reflect well on you & your VTX. Fits: All '02-'08 VTX1800 Models Fits: All ’02–’08 VTX1800 Models 39.99 $ 7823 Brake Line Accent Covers (pr) 8684 Lower Fork Skins (pr) 139.99 HANDLEBAR CONTROLS $ F OOT CONTROLS stiletto axle caps for vtx For those with Stiletto ISO-Grip End Caps, here’s an opportunity to make a stronger statement. Stiletto Axle Caps fit up closely to the sliders with no unsightly gaps. CHROME Fits: All VTX1300/1800 Models $ 1207 Stiletto Axle Caps (pr) L U G G AG E 89.99 Note: Will not install with Küryakyn Lower Fork Skins. TOURING spun blade spinning axle caps Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome-plated ABS blades start to spin when the bike reaches about 25 mph. An easy, innovative way to add some additional cool factor to your bike. AIR CLEANERS MISC Fits: All VTX1300/1800 Models 1239 Spun Blade Spinning Axle Caps (pr) 119.99 $ INDEX Note: Will not install with Küryakyn Lower Fork Skins. 8 6 6 . 2 7 7 . 9 5 9 8 167 headlight visor Long, lean, & mean! That’s the illusion your stock headlight shell will get by adding this slick Headlight Visor. Features a nicely finished rolled front edge with center bullet - a big difference that will be noticed immediately. Fastens securely to your existing headlight for easy installation! neck cover for v star 1100 A stunning replacement for the dull, stock, black components found on your bike. The chrome-plated contours have been smoothed & molded to provide a flowing appearance. The right side cover has a stylized teardrop shaped boss that surrounds the ignition switch & leaves just its outer surface exposed. Simple installation. Fits: All ’99-’12 Road Star Models (except Warrior), all ’98-’10 V Star 650 Classic & '99-'09 V Star 1100 Classic Models with 7" headlamp Fits: All ’99-‘09 V Star 1100 Models 7856 Neck Cover (set) $ 2182 Headlight Visor (ea) 79.99 32.99 $ chrome fork protector covers for raider When styling choices for your Raider reach a fork in the road, keep this in mind; chrome always looks better than plain black plastic! The stock black fork protectors are difficult & time consuming to remove but they do help shield against nicks & scratches. These peel-&-stick chrome covers provide a classy custom appearance while keeping the protection the factory intended in place. Fits: All ‘08-‘12 Yamaha Raider Models 8699 Chrome Fork Protector Covers (pr) 39.99 $ 4016 4016 4015 speedometer visor Easily affixes to the speedometer. Besides the sleek appearance, you’ll really appreciate the reduction in glare if you run a windshield! 26.99 4015 Speedo/Tach Visor (ea) $ 4016 Speedo/Tach Visor (ea) $ Fits: Honda: ‘02-’06 VTX1800C, All 250 Rebel, Shadow 1100 with Round Speedo on handlebars measuring 3-3/4” Victory: All '04-'12 Models (Jackpot, Kingpin, Vegas, Hammer) with digital gauge (except Vision) Universal: Speedometers & tachometers 3-3/4” diameter with 7/16” of exposed bezel/sidewall R E A R E N D C H R O M E F O R Y O U R R A I D E R ! - P G 18 4 168 Fits: Speedometers & tachometers 3-1/4” diameter with 1/8” of exposed bezel/sidewall W W W . K U R Y A K Y N . C O M 25.99 BIKE MAPS G O L DW I N G 8680 D C A N -A M D 8680 SPORT BIKE LIGHTING 8681 D B A AC C E S S O R Y MOUNTS C HANDLEBAR CONTROLS F OOT CONTROLS A. neck cover for valkyrie C. handlebar riser accents This beautifully chromed delta-shaped cover neatly hides the front tank tab & neck top. Stainless steel mounting hardware is included to complete this easy installation. Most people agree, this Cruiser is one of the greatest available. It doesn’t need much but these easy stick-on chrome Riser Accents sure make a difference. for m109 r Fits: ’06-’12 Suzuki M109R Models Fits: All ‘97-’04 Valkyrie Models (except Rune) 7855 Chrome Neck Cover $ CHROME 8682 Handlebar Riser Accents (pr) 29.99 $ L U G G AG E 41.99 for Valkyrie (ea) B. fender louvers for VTX Your VTX Retro fender is classy but it cries out for these precision fitting molded chrome inserts - by far the finest available! Don’t confuse ours with other ill-fitting, poor quality versions out there Fits: All ’03-’09 VTX1300 Retro/S/T & all ’02-’08 VTX1800 Retro/S/T Models 9018 Front Fender Louvers (set) 9019 Rear Fender Louvers (set) D. triple tree cover set for vtx TOURING This is the ultimate front end dress-up kit for the VTX. We offer a 5-piece set that includes a one-piece cover for the top triple clamp, chrome fork tube caps, & covers for the lower triple clamp for the VTX1800C. We offer a 3-piece set that includes a one-piece cover for the top triple clamp & a pair of die-cast fork tube caps for the VTX1300. This kit provides the look of a custom chrome replacement triple tree set at a fraction of the cost & with significantly less work! AIR CLEANERS 59.99 8680 Upper & Lower Triple Tree Cover Set (pr) $ 8681 Upper Triple Tree Cover (ea) $ MISC Fits: ’02-’08 VTX1800C/F 32.99 $ 32.99 $ 59.99 Fits: ’03-’09 VTX1300R/S/T/C Note: Requires removal of handlebar/riser assembly & headlight mount during installation. 8 6 6 . 2 7 7 . 9 5 9 8 169 INDEX BRAKE COVERS 7821 7820 brake component dress-up kit for honda & kawasaki All kits include a replacement fluid reservoir cap & a wrap-around reservoir cover. The kit for the VTX1800C/F also places a streamlined cover on the master cylinder. All components feature a dazzling chrome finish. front caliper cover for honda Details make the difference! In just a few minutes your front brake caliper can spring to life with this brilliant chrome cover. Styled to complement the Rear Caliper Cover, the pair provides a balanced, integrated look. Installation is a snap with high strength peel-&-stick adhesive. $ 7821 Brake Dress-Up Kit (ea) $ 7822 Brake Reservoir Cap (cap only) $ Fits: ’02-’08 VTX1800C/F 29.99 Fits: ’03-’08 VTX1800 Retro/S/T/N, all '09-'12 Fury Models & '10-'12 VT1300 Custom Line (Sabre, Stateline & Interstate) 39.99 1282 Fits: All‘03–’09 VTX1300 Retro/S/T Models $ 1284 Fits: All‘03–’09 VTX1300C Models & '08-'12 $ 21.99 Fits: Honda: '03-'09 VTX1300, '02-'08 VTX1800 Kawasaki: '02-'08 Mean Streak, '03-'08 1600 Classic & Nomad, '11-'12 Vaquero 1700 & '08-'12 Shadow 750 Aero Models (ea) 39.99 Shadow 750 Spirit/ Phantom Models (ea) caliper cover front caliper covers This wicked looking cover installs in minutes. No tools required. for yamaha This bold design evokes the look of a high performance six piston brake caliper. With multiple cutouts, keep the look light or install the black back plate & cover everything up. Installs with high strength peel-&-stick adhesive. 1294 Fits: Kawasaki: All Vulcan 900/1500/1600 $ 69.99 $ 20.99 Suzuki: 800 Volusia/Boulevard C50/M50 Yamaha: V Star 1100/1300, Stryker & Royal Star Venture (ea) 1294 Fits: All ’06-’12 Roadliner, Stratoliner & Deluxe Models, all ‘04-‘12 Road Star 1700 Models (except Warrior), & all '08-'12 Raider Models 8701 Front Caliper Covers (set) 39.99 7820 Brake Dress-Up Kit (ea) rear master cylinder cover for yamaha Get a clean finished look in minutes. 7825 Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior), & '09 -'12 V Star 950 31.99 $ 7825 Rear Master Cylinder Covers (ea) front caliper covers for vtx1800 1298 Perk up that front end by adding these super easy to install chrome Caliper Covers. Fits: All ’03-’08 VTX1800 Models (except Early ‘03 & ‘07-’08 Models or other Models with caliper bleeder screw between brake line fittings) 1298 Caliper Covers for VTX1800 (pr) 170 $ 49.99 W W W . K U R Y A K Y N . C O M 1289 BIKE MAPS 1299 rear caliper cover G O L DW I N G Finish off that rear brake with our pure custom looking Rear Caliper Cover. You won’t believe the difference! C A N -A M 39.99 1299 Rear Brake Caliper Cover (ea) $ 1289 Rear Caliper Cover (ea) $ Fits: ‘02-’08 Honda VTX1800 Models 29.99 SPORT BIKE Fits: ‘06-’12 Suzuki M109R Models rear caliper cover for kawasaki LIGHTING & suzuki Styled to imply speed & motion, our Rear Caliper Cover creates a powerful high-tech look. The rich chrome finish adds a bright spot to the rear wheel area & is much easier to keep clean than the stock finish. Installation is simple & quick with high strength peel-&-stick adhesive. AC C E S S O R Y MOUNTS Fits: Kawasaki: All ’06-’12 Vulcan 900 Models, all ’03-’08 Vulcan 1600 Models, all ’04–’10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all ’02–’08 Vulcan 1500, & all '09-'12 Vulcan 1700 Classic Suzuki: All ’06–’12 M109 Models, all ’08-’09 C109 & ‘09 M90 Models 1283 Rear Caliper Cover (ea) 2015 2013 13/16" W x 1-3/8” T 39.99 HANDLEBAR CONTROLS $ F OOT CONTROLS rear brake caliper cover for vtx1300 CHROME Flow chrome over that Rear Brake Caliper & make it sparkle! Easy installation. 1231 Fits: All ’03-’09 VTX1300 Models 1288 Rear Brake Caliper Cover (ea) brake bleeder screw cover & banjo bolt cover L U G G AG E 39.99 $ Easily installed, these pieces provide a nice detail when dressing up brake calipers & master cylinders on Cruisers. TOURING 19.99 $ 2013 Bleeder Screw Covers (pr) 2015 Banjo Bolt Cover (ea) 15.99 $ Fits: Most Cruisers with Banjo Fittings Requiring a 12mm wrench AIR CLEANERS bullet covers for banjo bolts Perfect accent for caliper bolts. MISC 13.99 $ 1231 Bullet Banjo Bolt Covers (ea) Fits: All VTX1800 Models - Hand Control Clutch Banjo Bolt, Most Banjo Bolts require a 12mm wrench & only have 1 line protruding (Universal fit) 8 6 6 . 2 7 7 . INDEX 9 5 9 8 171 marquis choke knob cover U.S. Patent 5,836,214 Our attractive chrome Choke Knob Cover installs easily without removing or modifying the stock choke knob. 2009 Fits: Honda: All VTX1300, '04-’09 Shadow 750 Aero/Spirit C2 Kawasaki: Vulcan 800/1500/1600 Yamaha: '99-’07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100 $ 2009 Marquis Choke Knob Cover (ea) 29.99 petcock cover for vtx1300 Add the finishing touch to your drab fuel petcock by covering those unfinished parts with style. The left side of your tank will now look high class. Fits: All '03-’09 VTX1300 Models 7830 39.99 $ 7830 Petcock Cover for VTX1300 (ea) shifter pivot cover for vtx 4046 On a finely finished bike like the VTX, you don’t want an ugly weld showing on an otherwise decent shift lever. Fits: ’02-’08 VTX1800 Retro/S/N/T 4046 Shifter Pivot Cover (ea) 19.99 $ 7011 mega horns Be heard loud & clear with our trumpet style horns for your ride. With new Mega Horn technology, get that loud air horn style sound in one little package. Installs swiftly in front of your motor along your front frame tubes. Ride on & be heard. 7737 Mega Horns with Mount (ea) 139.99 $ driver footpeg mount covers for vtx1300c Finish off those unfinished welds on your driver footpeg mounts even if you aren’t a skilled welder! Our Driver Footpeg Mount Covers work great with stock pegs & also do wonders at showing off custom peg applications. Fits: '03-’09 VTX1300C Fits: Honda: All VTX1800/1300 Models 7011 Driver Footpeg Mount Covers (pr) Note: Engine guards may limit installation. $ Kool Kaps chrome covers Cover those unsightly & unfinished bolt heads with brilliant chrome. 2447 For 3/4” Hex Bolts* (10 pack) 2451 For 3/4” hex head bolt used in Küryakyn Highway Pegs* (pr) 11.99 $ $ 2.99 works great on our highway pegs! * Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N 400039 for $8.99. 172 W W W . K U R Y A K Y N . C O M 49.99 add some flair! Attitude Medallions 3714 3796 BIKE MAPS Add a personalized flair to your ride! Perfect for the left side of your Yamaha Motor or to any flat surface with a 4-1/2” diameter. Simple & affordable - A great way to show off a little attitude. 3752 3795 Fits: Universal peel-&-stick applications - Requires a 4-1/2” diameter flat surface Yamaha: All ’06-’12 Roadliner, Stratoliner/Deluxe & ’08-’12 Raider Left Tranny Cover & Front Drive Hub Cover, & all ’07-’12 V Star 1300 & Stryker, ’09-’12 V Star 950 Front Drive Hub Cover Only & All V Star 650 Models on Air Cleaner Covers chrome medallions 19.99 $ Firefighter (ea) $ Deco* (ea) $ Flame* (ea) $ 3796 3797 3798 3799 19.99 19.99 19.99 C A N -A M 3797 3799 SPORT BIKE 3713 black medallions chrome medallions Helicopter Gunship (ea) G O L DW I N G 3798 *Not recommended for Yamaha Engine applications - Use on flat surfaces only. 3752 3754 3764 3795 3764 3754 19.99 Widow (ea) $ Zombie (ea) $ Chauvinist (ea) $ Patriot (ea) $ 19.99 3713 Widow, Black (ea) 3714 Zombie, Black (ea) LIGHTING 18.99 $ 18.99 $ 19.99 AC C E S S O R Y MOUNTS 19.99 HANDLEBAR CONTROLS 3797 F OOT CONTROLS CHROME L U G G AG E TOURING zombie™ medallions 1491 Keep a bunch of little Zombies with you wherever you are. Stick them on your motorcycle, toolbox, car, computer monitor—anywhere you think their sinister faces will brighten your day. Just peel off the backing & fasten them anywhere! 19.99 1491 Large Zombie (pr) $ 1492 Small Zombie (pr) $ Requires 2” of flat surface for mounting 8 6 MISC 18.99 Requires 1” of flat surface for mounting Note: Replacements for Küryakyn P/N’s 7411, 7412 7520, 7521, & 8712 1492 6 . 2 7 7 . 9 5 9 8 AIR CLEANERS INDEX 173 ENGINE F O R YA M A H A 7728 7726 7725 7759 tappet block covers for yamaha starter cover for yamaha Bolt directly over the bottom of your pushrod tubes & stand back to admire the chrome flowing from your pushrod tubes all the way down your bike. Road Stars can add the Cylinder Base Covers (P/N 7729) to complete the new chromed base of your motor. Crown the end of your starter in Sparkling chrome & add smooth chrome lines to the top of your industrious look starter. This will really dress up the look of the front of your motor. 7725 All ’06 -’12 Roadliner, Statoliner, 7728 Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star $ 89.99 7726 Fits: ‘06-’12 Roadliner/Stratoliner/Deluxe, ‘08-’12 Raider, all $ 69.99 Warrior Models (pr) ‘99-’12 Road Star 1600/1700, & ‘02-’09 Road Star Warrior Models (Includes 1 pair of Tappet Block Bottom Accents Only- no lower trim) (pr) $ 49.99 Deluxe, & Raider Models (ea) pushrod top covers for yamaha Connect the chrome between your valve covers & push rod tubes on the right side of your motor. 7759 Fits: ‘99-’03 Road Star 1600 Models (pr) 39.99 $ cylinder base covers for road star Flow chrome across the left side of your motor & atop your transmission to get that expensive chromed motor look in minutes! Add our Tappet Block Covers (P/N 7728) for enhanced sparkle on the right side. Fits: All ‘99-’12 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models 7729 Cylinder Base Covers (set) $ 99.99 Note: Fully dress your motor with additional Yamaha OEM chrome motor covers. 1062 1061 shift rod linkages for yamaha Fits: All ’99-’12 Road Star 1600/1700 (except Warrior) & '08-'12 Raider Models 174 ©2008 Küryakyn for road star 1700 7761 Fits: All ‘04-’07 Direct replacement installation. Let a little of your dark side out. 1061 Widow Shift Rod Linkage (ea) 1062 Zombie Shift Rod Linkage (ea) finned spark plug covers $ 89.99 $ 89.99 39.99 $ Road Star 1700 Models (except Warrior) For Carbureted Models Only (pr) W W W . K U R Y A K Y N . C O M ENGINE F O R V I C T O RY E BIKE MAPS E C G O L DW I N G D C A N -A M D SPORT BIKE A B LIGHTING A AC C E S S O R Y MOUNTS Renderings Shown B A. ENGINE cAM HANDLEBAR CONTROLS D. CLUTCH ARM COVER ADJUSTER BOLT COVER for victory for victory No other clutch arm cover offered for the Victory motor looks this good or installs this easy. Featuring a gear tooth design & simple bolt on installation to get you back on the road in no time. Cover those unsightly cam adjuster bolts with these great looking, gear tooth designed accents. Engineered exclusively for the Victory motor, these covers bolt on & coordinate with all the Victory chrome engine accents. 7686 Fits: All '04-'12 Victory Models, 59.99 $ 7684 Fits: All '06-'12 Victory Models, Cruisers 39.99 $ Cruisers & Touring (ea) & Touring (pr) F OOT CONTROLS CHROME E. SMOOTH V B. CHROME DIPSTICK COVER for victory Update you Victory side covers with a smooth chrome look that’ll really stand out. Installs in just minutes for a truly unique look unlike any other. for victory As useful as dipstick’s are, they can be an eyesore & take away from the look of your motor. This new chrome dipstick cover features a gear tooth design that looks great & retains the functionality of stock. Installation is quick & easy to get you back on the road in no time. $ 7682 Fits: All '06-'12 Victory Models, Cruisers & 7685 Fits:'03-'12 Victory Models with V 59.99 $ L U G G AG E TOURING shaped covers between cylinders, Fits both Left & Right side (pr) 45.99 Touring (ea) AIR CLEANERS Note: Only for 100" or 106" motors. C 7689 C. ROULETTE Horn Cover for victory A chrome horn is just seconds away with this great looking cover. Retains the sound & improves the look on horns mounted between the frame down tubes. MISC 34.99 $ 7689 Fits: All '04-'12 Victory Vegas, Kingpin, Hammer, Jackpot, 8 Ball & Universal for '04-'12 Models with horn mounted at neck between front down tubes (ea) 8 6 6 . 2 7 7 . 9 5 9 INDEX 8 175 ENGINE FOR HONDA 7731 7708 7703 7703 176 W W W . K U R Y A K Y N . C O M BIKE MAPS OW N A S H OW- S TO P P I N G M OTO R AT A R E A S O N AB L E PRICE ! G O L DW I N G C A N -A M engine case covers SPORT BIKE Amaze everyone with the look of a new show-stopping chrome motor on your VTX1300, VT1300 Custom Line or Fury. See both sides of your motor & even your clutch sparkle with chrome. No more drab gray areas around the heart of your motor any more. LIGHTING for honda 7703 Fits: All ‘03-’09 VTX1300 Models 7731 Fits: All '09-'12 Fury, All '10-'12 AC C E S S O R Y MOUNTS 199.99 $ 199.99 $ VT1300 Custom Line (Sabre, Stateline, & Interstate) chro m e both sides of yo u r engine ! HANDLEBAR CONTROLS engine cover inserts for honda Dress up your plain chrome engine covers with these racy, speed-lined Engine Cover Inserts. Sold in sets of 3, our molded ABS chrome-plated inserts stick to the smooth clutch, timing, & left crankcase covers adding depth & a machined from billet look. Easily installed without tools. Simple peel-&-stick installation. 7707 Engine Cover Inserts (set/3) $ 69.99 7708 Engine Cover Inserts (set/3) $ 69.99 F OOT CONTROLS CHROME Fits: All ‘02-’08 VTX1800 Models L U G G AG E Fits: All ‘03-’09 VTX1300 Models & all '09-'12 Fury Models, all '10-'12 VT1300 Custom Line (Sabre, Stateline & Interstate) TOURING A L S O AVA I L A B L E 7703 7708 1. BOOMERANG FRAME TRIM pg 180 AIR CLEANERS 2 . DRIVE SHAFT COVER pg 180 3 . A dditional rear MISC endchro m e pg 180-181 INDEX 8 6 6 . 2 7 7 . 9 5 9 8 177 7709 looks great with o u r engine case covers ! clutch housing shroud for vtx1800 We designed this part to finish the job started by our Engine Case Covers. Made of stamped steel with chrome-plated construction this piece installs quickly & easily with industrial strength adhesive tape to perfectly cover the exposed upper surface of the clutch housing. Fits: All ’02-’08 VTX1800 Models with Küryakyn Engine Case Covers (P/N 7704) only 7709 Clutch Housing Shroud (ea) 59.99 $ 9001 9002 after 9001 3/4” 8261 3-1/8” rear shock top cover for honda 8261 Chrome shocks with a dull chrome top mount? Not good. Finish the chrome all the way to the top with our Rear Shock Top Cover & notice the difference. With Küryakyn styled blood grooves, these covers finish the shock top out right. Fits: All Honda VTX1800 (except N) & all VTX1300, Shadow 1100 Sabre/Spirit, Shadow 750 Ace/Aero/Spirit/Phantom & other Models with shocks matching dimensions shown 8261 Rear Shock Top Cover for Honda (pr) $59.99 reflector covers for honda & yamaha 9002 before Heighten visibility while adding a stylized cover! 19.99 9001 Small Reflector Covers (pr) $ 9002 Large Reflector Covers (pr) $ Fits: Front: All VTX1800, all 1100 Spirit (front & rear), all 750 Spirit, all Shadow VLX 600, '10-'12 VT1300 Custom Line & other motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector Fits: Front: All Yamaha Road Star, V Star 950, 1100, Royal Star & Royal Star Venture, Raider & Stryker Rear: Honda: ‘02-’07 VTX1800 (except C) Models & ‘03-’06 1300 Retro/S/T, & other motorcycles with reflectors that are 3-1/2” by 1-3/8” or smaller with 1/4” of clearance around the reflector 178 W W W . K U R Y A K Y N . C O M 19.99 7704 BIKE MAPS 7704 G O L DW I N G C A N -A M SPORT BIKE engine case covers for vtx1800 Complete the creamy, luscious appearance of your VTX1800 with these ultimate Engine Case Covers! Fit snugly along the base of the engine below the fins on both sides. They look like expensive chromed-engine cases but they bolt on in minutes & cost a heck of a lot less. LIGHTING AC C E S S O R Y MOUNTS Fits: All ‘02-’08 VTX1800 Models 199.99 $ 7704 Engine Case Covers 7704 HANDLEBAR CONTROLS don't miss Engine cover inserts - A simple & great looking addition! See Pg 177 F OOT CONTROLS 7824 CHROME rear tank trim for vtx1300 c Add some shine & fill the void between the gas tank & your seat with this stylish chrome accent. Keep the lines of your bike flowing & cover up those crude welds on the back of your tank with a quick & easy installation. L U G G AG E Fits: ‘03-’09 VTX1300C Models TOURING 39.99 $ 7824 Rear Tank Trim for VTX1300C (ea) intake runner/spark plug cover for valkyrie after Replace the dull cast surface with beautiful show-chromed finish. $ 7705 Fits: Valkyrie 89.99 & Valkyrie Tourer (except Interstate) (pr) 8 6 transmission cover set for valkyrie Put the finishing touch on your cast transmission case & nicely MISC complement existing chrome engine components. 7710 Fits: All Valkyrie 169.99 $ Models (except Rune) (pr) 6 . 2 7 7 . 9 5 9 8 AIR CLEANERS INDEX 179 REAR END FOR HONDA A A. boomerang frame trim for vt1300 & fury Cover those huge black side panels with aggressive styling & beautiful chrome. These boomerang covers give you the ultimate custom look without spending excess time & money to chrome the frame. VT1300 Custom owners add the Küryakyn Drive Shaft Cover (P/N 8951) & prepare to be amazed! 8950 Fits: ‘10-'12 VT1300 Custom Line (Sabre/ $119.99 Stateline/Interstate) Models (pr) 119.99 $ 8952 Fits: ‘09-’12 Fury Models (pr) B. drive shaft cover for vt1300 B Want the look of a custom chrome drive shaft without the wasted time & extra hassle of tearing apart the rear end? This cover will give you a custom look in minutes & will cost you much less than chrome plating all the original parts. Fits: ‘10-'12 VT1300 Custom Line (Sabre/ Stateline/ Interstate) Models 8951 Drive Shaft Cover (ea) $ 99.99 VTX1300 Shown D F C 8305 Shown D E C F 8260 180 W W W . K U R Y A K Y N . C O M BIKE MAPS A G O L DW I N G C A N -A M B SPORT BIKE LIGHTING AC C E S S O R Y MOUNTS HANDLEBAR CONTROLS C. drive shaft cover for vtx U.S. Patent D549,622 F OOT CONTROLS Compare our Drive Shaft Cover to others on the market. This setup sets a whole new standard. Two-piece, chrome-plated stamped steel construction covers both the differential & shaft tube giving the appearance of a completely chromed assembly. CHROME Fits: All ‘03-’09 VTX1300 & ’02-’08 VTX1800 Models D 8285 Drive Shaft Cover for VTX (ea) 139.99 $ D. drive hub top cover for vtx F. frame trim for vtx Imagine a great football team with no quarterback. Adding one key player can create a legendary combination. Announcing Küryakyn’s top draft pick; the Drive Hub Top Cover for the VTX. Add this new player to your bike & our gleaming Chrome Drive Shaft Cover (P/N 8285) & this team could be on its way to the playoffs! Transform that rough black frame forging into a sleek, stylish, attention getter. This two-piece kit attaches with high-strength, high temp adhesive for quick & easy installation. Fits: All Honda VTX1300/1800 Models with Küryakyn Drive Shaft Cover (P/N 8285) 8688 Drive Hub Top Cover for VTX (ea) $ 99.99 8260 Fits: All VTX1800 (pr) 8305 Fits: All VTX1300 (pr) $ 89.99 $ 79.99 L U G G AG E TOURING AIR CLEANERS E. swingarm cover for vtx MISC Your friends are going to think you went out & bought a whole custom swingarm with this show-chrome cover. It'll set you apart & is the perfect complement to our Drive Shaft Cover (P/N 8285). Fits: All ‘03-’09 VTX1300 & ‘02-’08 VTX1800 Models 8287 Swingarm Cover for VTX (ea) 8 6 6 . 2 7 7 . $ 9 INDEX 99.99 5 9 8 181 REAR END F O R YA M A H A A chro m e yo u r entire visible s w ingar m in m in u tes ! C B E 8262 8229 A. lower belt guard accent for road star Want to sparkle up that drab stock belt guard? This accent is easily added to the lower belt guard to protect the OEM belt while covering the black plastic. WOW! What a difference! Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior) 8663 Lower Belt Guard Accents (ea) $ 89.99 C. phantom covers for road star Add the finishing touches to the tail end of your swingarm & smooth out those lines. These little beauties cover up the axle, adjustment bolts, & rough casting in one easy step. 8229 Fits: All '99-'12 Road Star (except Warrior) (pr) Note: $ 69.99 8665 Fits: All ’99-‘12 Road Star (except Warrior) with stock $ 79.99 Right side on '07-'12 Models requires aftermarket exhaust with 1" clearance from axle nut. exhaust or other that covers right rear axle bolt (pr) Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for proper clearance. B. swingarm covers for road star Want the appearance of an expensive chrome swingarm without the hassle of tearing apart the back end of your bike? Chrome your whole visible swingarm with our Swingarm Cover Kit & add that extra shine in minutes for a fraction of the price. 149.99 8262 Fits: All ’99-’12 Road Star (except Warrior) (set) $ 8664 Fits: All ’99-‘12 Road Star (except Warrior) with stock exhaust or other that covers right $ Note: Right side on ‘07-’12 Models requires aftermarket exhaust with 1” clearance from axle nut. 149.99 rear axle bolt (set) Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for proper clearance. D B 182 W W W . K U R Y A K Y N . C O M BIKE MAPS G O L DW I N G C A N -A M D SPORT BIKE B LIGHTING C AC C E S S O R Y MOUNTS A HANDLEBAR CONTROLS E F OOT CONTROLS CHROME D. boomerang frame trim for road star Chrome your rear frame supports with smooth elegant beauty the simplest way possible! These metal covers bolt directly over your bland frame & include all the hardware you will need for a seamless installation. You’ll get the look of a custom chromed frame for a fraction of the cost! L U G G AG E D TOURING Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior) 139.99 $ 8662 Boomerang Frame Trim for Road Star (set) AIR CLEANERS E. front drive pulley cover for road star Customize your Road Star & add some class with the look of motion to your front drive pulley cover. Installation takes only seconds. MISC Fits: All ‘99-’12 Road Star 1600/1700 Models (except Warrior) 39.99 $ 8960 Front Drive Pulley Cover (ea) INDEX add the look of m otion ! 8 6 6 . 2 7 7 . 9 5 9 8 183 REAR END F O R YA M A H A B A C D Zombie Medallion pg 173 A A B A. Side Cover accent for yamaha B. top belt guard for yamaha A touch of chrome in just the right place to accent an area that usually goes unnoticed. Featuring a stylish ribbed design & made from lightweight ABS, this cover uses ultra strong VHB tape for a secure hold & quick installation. Simple elegance. This fully chromed replacement guard with its turned-down end & stylish side accents only enhance the original lines of the rear end. Easy two bolt installation. Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe 8944 Side Cover Accent for Yamaha (ea) 184 39.99 $ Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe 8940 Top Belt Guard (ea) $ 79.99 W W W . K U R Y A K Y N . C O M BIKE MAPS C License Plate Bracket pg 189 G O L DW I N G 8942 C A N -A M covers both sides of yo u r s w ingar m ! C. swingarm axle adjuster cover for raider Custom Bullet Turn Signals pg 103 This two-piece creation was not only designed to conceal but also gracefully highlight the trailing edge of your swingarm without being too overbearing. The removable center allows access for belt adjustments when needed. Select the original or short cover to suit your style & be amazed. (Sold individually) SPORT BIKE Fits: All ‘08-‘12 Yamaha Raider Models - Fits both left & right side of swingarm (sold individually) LIGHTING Note: Only P/N 8942 installs on right side with Vance & Hines Exhaust. 8941 Swingarm Axle Adjuster Cover (ea) 8942 Short Swingarm Axle Adjuster Cover (ea) $ 89.99 $ 69.99 AC C E S S O R Y MOUNTS 8941 HANDLEBAR CONTROLS 8942 F OOT CONTROLS looks great with... license plate bracket Replace your sub fender with our uniquely styled replacement. CHROME See Pg 189 D D. boomerang frame cover for yamaha L U G G AG E A renowned Küryakyn parts designer once said, “Chrome won’t get you home, but you’ll look good when you get there.” This natural transition covers the black frame rails with a flash of chrome that catches the eye & provides a more flowing appearance. One of the most aesthetically pleasing additions you can make to these already beautiful motorcycles. TOURING Fits: All ’08-‘12 Yamaha Raider Models & '06-'12 Roadliner, Stratoliner & Deluxe (Covers left side only) Covers Left Side Only 8943 Boomerang Frame Cover (ea) 59.99 $ AIR CLEANERS A L S O AVA I L A B L E MISC 1 . T appet block covers pg 174 2 . C hro m e fork protector covers pg 168 8 6 6 . 2 7 7 . 9 5 9 8 INDEX 185 REAR END F O R V S TA R 8237 8203 8203 phantom covers 8236 for v star Turn a hodge-podge of fasteners, frame tubes, axles, hubs etc. into one smooth-sculpted chrome area. The kit includes covers to hide the bolt heads that secure the drive housing to the swingarm. boomerang frame covers for v star 650 & 1100 Easily installed, these show-chromed, die-cast frame covers make artwork out of a part of your bike that would otherwise fade into the background. The kit for the V Star 1100 includes a pair of upper frame covers that smooth the transition from the Boomerang Frame Cover to the fender. 8236 Fits: All V Star 650 Models (pr) 8237 Fits: All V Star 1100 Models (pr) 650 & 1100 Fits: ‘98-’11 V Star 650, ‘99-’09 V Star 1100 (‘06-’11 V Star 650 & 1100 right sides require aftermarket exhaust that allows 3/4” clearance from exhaust mount bracket & axle nut) 8203 Phantom Covers for V Star (pr) $ 79.99 Note: When checking for appropriate clearance on ‘06-‘11 Models please remember swingarms move separate from your exhaust mounts. Compress & extend the suspension for proper clearance. 109.99 $ 169.99 $ shaft drive cover for v star 650 & 1100 U.S. Patent D549,621 Give the rear differential the effect of a chromed housing at a fraction of the cost. Our Shaft Drive Cover integrates nicely with our Phantom Covers. Easy add-on with a two-bolt installation. 8286 Fits: ’99-’09 V Star 1100 & ’98-’11 V Star 650 Models 8286 8286 Shaft Drive Cover for V Star (ea) $ 89.99 2024 8286 2017 mid-frame covers for v star 1100 Turn that drab black frame tube under your seat into a real eye catcher. When added to our Boomerang Frame Cover it looks like you’ve chromed the whole frame! Quick & simple to install. 8255 Fits: All ’99-’09 V Star 1100 Models (pr) 186 $ 69.99 clutch cable adjuster cover ferrule cover Hide the crude, zinc-plated cable adjuster! Installs with easy-to-handle spring clips. Here’s a little flash of chrome for V Star Speedo cables. Just slip it into place & tighten the set screw. 2017 Fits: All Kawasaki 800 for v star $ 41.99 Vulcan (ea) 2023 Replacement Spring $ 2.99 2024 Fits: V Star 650 Models (ea) Clips for P/N 2017 (pr) W W W . K U R Y A K Y N . C O M 19.99 $ L I C E N S E P L AT E S BIKE MAPS G O L DW I N G C A N -A M SPORT BIKE LIGHTING L.E.D. LAYDOWN CURVED LICENSE PLATE for victory & universal f u ll license plate ill u mination ! AC C E S S O R Y MOUNTS Nobody likes to have a license plate, but we all have to have one. So here is the solution to make it look good, maintain functionality, & remain legal all on a simple bolt on package. This curved plate frame features L.E.D. backlighting & a 15 degree mounting angle that flows with the lines on your bikes rear fender. HANDLEBAR CONTROLS Fits: '10-'12 Victory Cross Roads & Cross Country, Universal, Bolts to flat plate mount (Widest mounting slot is 5" wide) for 4"x7" plate 109.99 $ 7688 Laydown Curved License Plate Frame (ea) P / N 76 8 8 & 919 8 u se backplate sho w n F OOT CONTROLS Compliant with FMVSS#571.108 & marked SAE DOT L 11. Side View CHROME curved tip-back license plate frame L U G G AG E Add the Curved Tip-Back License Plate Frame & smooth out the back of your fender. With 8˚ of angle & a curved frame, this chrome beauty holds a 4” x 7” plate & bolts directly to your stock OEM license plate mount. Fits: Bolts directly to flat stock OEM license plate mount. Widest mounting slot is 5" wide. 9198 Curved Tip-Back License Plate Frame (ea) $ TOURING AIR CLEANERS 69.99 Note: Doesn't fit VT1300 Stateline or Interstate. MISC works great on short bobtail fenders too! INDEX 8 6 6 . 2 7 7 . 9 5 9 8 187 curved laydown license plate mount The rear fenders on today’s Cruisers are very impressive. The license plate bracket & reflectors are a different story. Our streamlined License Plate Mount holds a 4" x 7” plate & is truly the final touch needed. Such a difference for so little money. Fits: ’03-’09 VTX1300 Retro/S/T or ’02-’08 VTX1800 Retro/S/T Models 9171 Curved Laydown $ 79.99 License Plate Mount (ea) w orks great w ith r u n - t u rn - brake controller pg 1 0 0 CURVED LICENSE PLATE FRAME WITH DUAL ACCENT LIGHTING With its gentle curved contour & snug, fender-hugging mount, this license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D.’s provide additional plate illumination at night. A perfect complement to Run-Turn-Brake Controllers this plate ties right in for all 3 functions. Designed to fit 4” x 7” plates. Fits: ’03-’09 VTX1300 Retro/S/T, ’02-’08 VTX1800 Retro/S/T Models & Universal Lay Down Applications 3166 Curved License Plate Frame with Dual Accent Lighting (ea) Note: Universal applications requires drilling holes in fender. 188 W W W . K U R Y A K Y N . C O M 139.99 $ f u ll license plate ill u mination ! BIKE MAPS G O L DW I N G C A N -A M tri-light can be mounted on top or bottom! SPORT BIKE LIGHTING l.e.d. lighted License plate frame with tri-light Patent Pending AC C E S S O R Y MOUNTS Now you can add additional lighting & hide that ugly stock license plate mount at the same time. This great looking curved frame features a white L.E.D. license plate light & three red strip lights with running & brake functions all wrapped in a brilliant chrome finish. Designed to mount to the existing factory license plate bracket, installation is simplified, & with 8 degrees of tip back the rear of the bike will be transformed. Fits: Universal: Bolts directly to flat stock OEM license plate mount (Requires 3" of clearance for Tri-Light) 3152 L.E.D. License Plate Frame with Tri-Light (ea) Compliant with FMVSS#571.108 & marked SAE DOT L 11 149.99 $ HANDLEBAR CONTROLS both r u nning & brake f u nction F OOT CONTROLS CHROME sub-fender license plate bracket with l .e .d. curved frame L U G G AG E The best single way to improve the looks of this sweet ride is to fully remove & replace the OEM billboard with our Curved License Plate Frame. The compact brackets clean up your rear end & allow stock, custom, or Silver Bullet Turn Signals to be installed. The gleaming chrome frame is illuminated with cool white L.E.D.’s built right in. Now that’s more like it! TOURING AIR CLEANERS Fits: All ‘08-‘12 Yamaha Raider Models (Holds a 4" x 7" Plate) 189.99 $ 9257 License Plate Bracket with L.E.D. Curved Frame (kit) MISC Note: Turn signal mounts allow reinstallation of stock turn signals or others that mount with a 5/16” bolt or stud. w orks great w ith o u r u niversal & b u llet INDEX t u rn signals pg 1 0 3 - 1 0 4 8 6 6 . 2 7 7 . 9 5 9 8 189 new brighter f u ll license plate ill u mination ! l.e.d. lighted curved license plate frame for aero 750 & custom applications Finish off those clean lines of the Aero with this custom Curved License Plate Mount. Solid metal parts, L.E.D. lights, & curved design smooths out the lines of the bulky stock mount. Simple installation uses the stock mounting holes. (Holds a 4" x 7" Plate) Fits: All ’04-’12 Honda 750 Shadow Aero Models & Universal Custom Applications 119.99 $ 9255 L.E.D. Lighted Curved License Plate Mount (ea) Note: Universal applications may require drilling holes in your fender. Compliant with FMVSS#571.108 & marked SAE DOT L 11 9167 9166 9164 9165 3160 license frame & back plate set Our chrome frame & back plate will dress up your license plate when using the stock bracket. Fits: 4” x 7” Plates 9166 License Frame & $ 21.99 Back Plate Set Note: Acorn nuts not included. 3161 laydown license holder swept eagle Designed to replace Harley’s standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down. This contemporary eagle license plate frame can be the final touch you need. Fits: Universal for Custom Applications (Holds a 4" x 7" Plate) License Plate Frame not Included lone eagle Note: May require drilling holes in fender. 9165 Laydown License 39.99 $ license plate frame 3161 Fits: Universal 4”x 7” Plates (ea) $ 49.99 license plate frame Show your American pride! 3160 Fits: Universal 4”x 7” Plates (ea) $ 49.99 Plate Holder (ea) lighted license plate frame ball-milled license plate frames This chrome die-cast frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake & tail lamp circuits or together for an extra bright stop or running light. Includes integrated white light for plate illumination. Fits: 4” x 7” Plates 9167 Lighted License Plate Frame (ea) $ 49.99 The one thing most custom license plate frames have in common is they’re too small to fit some of the state’s license plates! This frame is offered in two sizes to fit 4-3/8” x 8” & 4” x 7” plates. Depending on which plate you’re working with, some minor modifications may still be necessary but this will make many installations much easier. Glistening chrome finish with ball-milled accents. 9164 Large License Plate Frame (ea) 9163 Small License Plate Frame (ea) $ 29.99 $ 29.99 Note: Not intended to replace O.E. brake or taillight. 190 W W W . K U R Y A K Y N . C O M 9253 BIKE MAPS 9251 G O L DW I N G new brighter f u ll license plate ill u mination ! C A N -A M HOW TO ORDER: SPORT BIKE 1 . SELECT LICENSE HOLDER ST YLE 2 . SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLA MP LIGHTING 3125 L.E.D. curved side mount license holders 9252 1 lit/ unlit AC C E S S O R Y MOUNTS In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then get the correct Mounting Clamps. Sized to fit 4” x 7” plates only. license holders HANDLEBAR CONTROLS 119.99 9253 Chrome Curved Horizontal Side Mount (ea) 9251 Chrome Curved Vertical Side Mount (ea) 9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea) $ 3125 Gloss Black Curved Horizontal Side Mount (ea) $ 119.99 $ F OOT CONTROLS 159.99 $ 119.99 Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering. Mount Clamps required for installation - Sold separately (below). 2 T aillight can be I nstalled on T op or B otto m ! CHROME Compliant with FMVSS#571.108 & marked SAE DOT L 11 m o u nt cla m ps 3175 Required for installation of Küryakyn Side Mount License Holders. chrome L U G G AG E 32.99 3174 Fits: All Honda VTX1300/1800 (ea) $ 3175 Fits: Yamaha Road Star without swingarm covers (except Warrior) $ 3176 Fits: Yamaha V Star 1100/650 (ea) 3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn Swingarm $ 31.99 & other motorcycles with 1-1/4” diameter swingarms (ea) 9252 31.99 TOURING 32.99 $ Covers (P/N 8262 & 8664) (ea) 3182 Fits: All Kawasaki ‘07-’12 Vulcan 900 Models & All ‘04-’10 Vulcan 32.99 $ 2000 Models (ea) AIR CLEANERS gloss black 32.99 3120 Fits: VTX 1300/1800 (ea) $ 3121 Fits: Yamaha Road Star without swingarm covers (except Warrior) $ 3122 Fits: All Kawasaki ‘06-’12 Vulcan 900 Models & All ‘04-’10 Vulcan $ 32.99 MISC & other motorcycles with 1-1/4”diameter swingarms (ea) 32.99 2000 Models (ea) INDEX Note: Please check local laws regarding side mount license plates before ordering. 8 6 6 . 2 7 7 . 9 5 9 8 191 l.e.d. license plate bolt lights Light up your license plate whether it’s in the stock location or custom mounted with these white L.E.D. bolt lights. You won’t find a cleaner license plate lighting option with a simpler installation. 19.99 $ 9199 L.E.D. License Plate Bolt Lights (pr) Note: 1/4”-20 Mounting Stud. Chrome Frame sold separately (P/N 9163 - pg 190). Not intended for use with Küryakyn Curved Frames. l.e.d. license plate illuminators 9399 with red accent lights Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4”- 20 mounting stud makes it simple to bolt them on, wire them in, & ride on! 9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr) 34.99 $ Not intended for use with Küryakyn Curved Frames. Lights Not Included A B C A. license plate helmet lock with mount Add this License Plate Helmet Lock & conveniently lock your helmet to your motorcycle. The simple little mounting plate easily bolts to the back of almost any motorcycle & allows the easiest access for locking your helmet. 4248 License Plate Helmet Lock (ea) $ 49.99 Note: Will not install with Curved License Plate Frames or Swept/ Lone Eagle License Plate Frames. B. license plate marker light/ turn signal mount Mount auxiliary marker lights or turn signals to your license plate. This simple system mounts directly to the back of your license plate with support backing plate & two side mount brackets. The side mount brackets have a 3/8” hole & will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets (See pgs 103-104). Note: Great option for allowing the mounting of saddlebags on bikes that need to relocate turn signals. Will not work with Küryakyn Curved License Plate Frames. 4247 192 License Plate Marker Light Mount (ea) 39.99 $ D C. turn signal relocator kit Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area. Side mount brackets have several mounting points for lights & will accept most OEM rear turn signals. 3155 Turn Signal Relocator Kit (kit) $ 49.99 Note: Will not work with Küryakyn Curved License Plate Frames. works well with: • 5/16” or 3/8” small & large silver bullets • p/n 5032 turn signal • küryakyn mini bullets D. inspection plate This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don’t have to mess up a nice paint job or chrome surface with some cheesy government sticker. Universal fitment. Plate 9168 Inspection 3-1/2” x 3-1/2” (ea) Inspection Plate 9162 Texas 2-7/8” x 4” (ea) $ 46.99 $ 46.99 W W W . K U R Y A K Y N . C O M