AE Cross Reference 09

Transcription

enhancers
vehicle cross
reference guide
Edition 2
FST240
FST240
• All Chevrolet/GMC Regular Cab up to 06
Does not fit some trucks with middle console. Console may need
removing during installation.
FST240 - Blnk, 2-10 or 12"
CHEVROLET/GMC SILVERADO/SIERRA
REGULAR CAB
AV65
Model#
Total Cu.Ft
Per Sub
Mounting Depth
Width
Height
Top Depth
Bottom Depth
FST240
2.40
1.21
6 11/32
55
15
5 1/4
8 1/4
AV65
• 02-09 Avalanche/Escalade EXT
• Hummer H2
Fits under rear seat, driver’s side & over transmission hump, back
seat will need to stay in upward position. Dual enclosure not
available due to vehicle’s factory hardware.
• 04-06 and 07 Classic 1500/2500/3500 Silverado/Sierra Crew Cab
• 04-06 2500HD Crew cab
• 01-06 and 07 Classic 1500HD Crew Cab
• 01-06 and 07 Classic 3500 Crew Cab
• 01-06 and 07 Classic 2500HD-3500HD Silverado/Sierra Crew Cab
CHEVROLET AVALANCHE
AV65 - Upward firing/Blnk or 1-10"
Fits most GMC 60/40 seats
Model#
AV65
Total Cu.Ft
0.65
Per Sub
0.65
Mounting Depth
4 5/8
Width
27 1/2
Height
5
Top Depth
16 1/2
Bottom Depth
16 1/2
GMX125
GMX125
• 07-09 1500 Silverado/Sierra Ext Cab
• 07-09 2500HD/3500HD
Fits under rear seat, will only fit new body style
GMX125 - Down firing / 2-10" or 12"
EXTENDED CAB
Model#
GMX125
GMX190, GMX240, SGMX107
EXTENDED CAB
Total Cu.Ft
1.25
Per Sub
0.62
Mounting Depth
10” - 5 3/4
12" - 5 1/2
GMX190 - GMX240 - SGMX107
• 01-06 and 07 Classic 2500HD Silverado/Sierra Ext Cab
• 01-06 and 07 Classic 3500 Silverado/Sierra Ext Cab
• 99-06 and 07 Classic 1500 Silverado/ Sierra Ext Cab
will fit Super Sport (SS) models – will not fit trucks with
rear split-bench seats
• 99-04 2500 Silverado/Sierra Ext Cab – will not fit
trucks with rear split-bench seats
GMX190 & GMX240 fits under rear seat, both cabinets
will fit above years.
SGMX107 fits under driver rear seat, drivers side only.
Installation doesn’t interfere with factory jack kit, will
fit above years.
Width
53 1/2
Bottom Depth
12 7/8
Front H
10 7/32
Rear H
6 5/8
GMX190 Down firing / 2-10" or 12"
GMX240 Forward firing / blnk or 2-10"
SGMX107 Down firing / 1-10" or 12"
Model#
GMX190
GMX240
Total Cu.Ft
1.90
2.40
Per Sub
0.95
1.20
Mounting Depth
6 5/8
7 1/8
Width
55
56
Bottom Depth
14 1/16
15 5/8
Front H
10
10
Rear H
7 1/8
7
Model#
SGMX107
Total Cu.Ft
1.07
Per Sub
1.07
Mounting Depth
6 3/4
Width
36 1/8
Depth
14 1/16
Front H
10
Rear H
7 1/8
phone 866-SPKR-BOX (775-7269)
fax 877-SPKR-BOX (775-7269)
2
www.audioenhancers.com
GMX120, GMX200, SGMX70
GMX120 - GMX200 - SGMX70
• 88-98 and 99 Classic 1500/2500/3500 Ext Cab
GMX120 fits under rear seat, will protrude
about 1 1/2", installation requires removal
of jack kit, will fit above models.
GMX120 Down firing / 2-10" or 12"
GMX200 Forward firing /
blnk or 2-10"
GMX200 fits under rear seat, installation
requires removal of jack kit, will fit above years.
EXTENDED CAB
SGMX70 fits under driver rear seat, will protrude
about 1 1/2", installation doesn’t interfere with
factory jack kit, will fit above years.
SGMX70 - Down firing / 1-10" or 12"
93NCT300, 93NCT180, NCT250, NCT180
Model#
GMX120
GMX200
Total Cu.Ft
1.20
2.00
Per Sub
0.60
1.00
Mounting Depth
6 1/2
5
Width
55
55
Bottom Depth
12 1/2
15 29/32
Front H
10 1/4
9 3/4
Rear H
7
5 5/16
Model#
SGMX70
Total Cu.Ft
0.70
Per Sub
0.70
Mounting Depth
6 1/2
Width
27 1/8
Bottom Depth
12 1/2
Front H
10 1/4
Rear H
7
93NCT300
• 93-02 Camaro
93NCT300 - Blnk, 2-10” or 12”
Fits well area of hatch models, will not fit convertible models.
93NCT180
• 93-02 Camaro
93NCT180 - Blnk, 2-10” or 12”
Fits well area, will fit hatch and convertible models
CHEVROLET CAMARO/FIREBIRD
NCT250
• 82-92 Camaro/Trans Am motorized or non-motorized
Fits well area of hatch models, will lose T-Top storage,
will not fit convertible models
NCT250 - Blnk, or 2-12”
NCT180
• 82-92 Camaro/Trans Am motorized or non-motorized
Fits well area of hatch models, will lose T-Top storage,
will not fit convertible models.
Model#
93NCT300
93NCT180
NCT250
NCT180
CCX220
Total Cu.Ft
3.00
1.80
2.54
1.80
Per Sub
1.50
0.90
1.27
0.90
Mounting Depth
8 3/8
8 3/8
7 7/8
7 1/4
NCT180 - Blnk, or 2-12”
Width
Height
Top Depth
Custom Fit
Custom Fit
Custom Fit
Custom Fit
Bottom Depth
CCX220
• 04-09 Colorado/Canyon Extended Cab
Fits rear floor pan, removal of storage boxes needed,
will lose seating
RS38 available for Crew Cab and Regular Cab
CHEVROLET/GMC COLORADO/CANYON
EXTENDED
CCX220 - Down firing / 2-10” or 12”
Model#
CCX220
Total Cu.Ft
2.20
Per Sub
1.10
Mounting Depth
11
fax 877-SPKR-BOX (775-7269)
3
Width
37 3/4
Height
16 3/8
Top Depth
11 1/8
Bottom Depth
14 3/4
GMS75
GMS75
• 95-03 S-10-S15 Regular-Standard Cab/Sonoma
Installs behind seat. Does not affect seat travel or
interfere with factory jack kit
GMS75 - 2-10”
CHEVROLET/GMC S-10-S15/SONOMA
REGULAR CAB
Model#
GMS75
Total Cu.Ft
0.75
Per Sub
0.37
Mounting Depth
4 5/8
Width
32
Height
12 1/4
Top Depth
3
Bottom Depth
7 1/2
S10X260
S10X260
• All years S-10-S-15 Extended Cab trucks
Raise rear seat, sit in to place, rear seating lost.
Sits against jack.
CHEVROLET/GMC S10-S15 EXTENDED CAB
S10X260 - Down firing/ 2-10" or 12"
Model#
S10X260
CREW170, CREW90, CREW120
Total Cu.Ft
2.60
Per Sub
1.30
Mounting Depth
7 9/16
CREW170
• 07-09 1500 Crew Cab - new body style
• 07-09 2500HD and 3500HD Crew Cab - new body style
Width
39 3/4
Height
14 1/4
Top Depth
11 1/2
Bottom Depth
15 1/2
Crew170 - Upward firing/ 2-10” or 12”
Fits under rear seat
CREW90
• 06 and 07 Classic 1500 Crew Cab
• 06 and 07 Classic 1500HD and 2500HD Crew Cab
• 06 and 07 Classic 3500 Crew Cab
CREW CAB
Installs behind seat, installation requires removal of
factory panel behind seat
Crew90 - Blank or 2-10”
Crew120 - 2-10”
CREW120
• 01-05 2500HD Crew Cab
• 01-05 2500 and 3500 Crew Cab
Installs behind seat, installation requires removal of
factory panel behind seat
Model#
CREW170
Total Cu.Ft
1.70
Per Sub
0.85
Mounting Depth
10”= 5 1/16
12”= 4 7/8
Width
51
Depth
17 3/8
Front H
8.5
Rear H
5 3/8
Model#
CREW90
CREW120
Total Cu.Ft
0.90
1.20
Per Sub
0.45
0.60
Mounting Depth
4½
5 15/32
Width
49
49
Height
13
10 1/4
Top Depth
2 1/4
5
Bottom Depth
6 1/2
7 1/8
fax 877-SPKR-BOX (775-7269)
4
JW170
JW170
• All Years SUV’s; Suburban, Tahoe, Yukon, Yukon XL, Ford
Expedition, Explorer, Hummer, Nissan Armada, etc.
JW170 - Down firing/ 2-10”
Fits behind rear row seating.
MOST MID AND FULL SIZE SUV
Model#
JW170
FST240
Total Cu.Ft
1.70
Per Sub
0.85
Mounting Depth
7 3/8
Width
33
Height
15 ¼
Top Depth
7 3/8
Bottom Depth
10 3/4
Top Depth
5 1/4
Bottom Depth
8 1/4
Top Depth
3
2 7/8
Bottom Depth
6
6
FST240
• 99-03 F150/F250/F350 Regular Cab
Does not fit some trucks with middle console. Console may
need removing during installation.
FST240 - Blnk, 2-10 or 12"
FORD REGULAR CAB
Model#
FST240
FSD130, FSD150
Total Cu.Ft
2.40
Per Sub
1.21
Mounting Depth
6 11/32
Width
55
Height
15
FSD130
• 04-09 F250/F350 Super Duty Crew Cab for power window models
Fits behind rear seat. Installation requires removal of jack kit,
seat belt cover and rear carpet. Power window motor will need
to be removed during installation. Will fit XL, XLT, FX4, Lariat,
Harley Davidson, and 60 anniversary edition models, will not fit
King Ranch
FORD F250/F350 SUPER DUTY CREW CAB
FSD130 - Blnk, and 2-10"
FSD150
• 97-07 F250/F350 Super Duty Crew Cab
Fits behind rear seat, installation requires removal of tray and
rear wall carpet. Will fit XL, XLT, FX4, Lariat, Harley Davidson,
and 60 anniversary edition models, will not fit King Ranch.
FSD150 - Blnk, 2-10” or 12”
Model#
FSD130
FSD150
FX110
Total Cu.Ft
1.30
1.54
Per Sub
0.65
0.77
Mounting Depth
4 1/2
4 1/4
Width
55
55
Height
16 1/4
17
FX110
• 02-09 F250/F350 Super Duty Extended Cab/ Super Cab
(Two door and suicide doors models)
Fits under rear seat, installation requires removal of jack kit.
Bar grill included (not pictured) for added protection
Will fit XLT, FX4, XL, Harley Davidson and Lariat models,
will not fit King Ranch.
FORD F250/F350 SUPER DUTY
EXTENDED CAB/ SUPER CAB
FX110 - Upward firing/ blnk or 2-10”
Model#
FX110
Total Cu.Ft
1.10
Per Sub
0.55
Mounting Depth
5 1/16
fax 877-SPKR-BOX (775-7269)
5
Width
50
Height
5 5/8
Top Depth
11 7/8
Bottom Depth
9 1/2
SSC120, SSC75, FX120, FX70, FX50
SSC120
• 04-08 F150 Extended Cab (SuperCab)
SSC120 - Down firing/ 2-10”
SSC75
Fits under rear driver side, retains factory jack.
FORD F150 EXTENDED CAB (SUPERCAB)
SSC75 - Down firing/ 1-10”
Will fit XL, XLT, FX4, Lariat, Harley Davidson, and 60
anniversary edition models, will not fit King Ranch.
FX120 - Down firing/ 2-10”
FX120
No box available for the F150 Lighting model. Will fit XL,
XLT, FX4, Lariat, Harley Davidson and 60 anniversary edition
models, will not fit King Ranch.
FX70 - Upward firing/ Blnk or 1-10”
FX70
FX50 - Upward firing/blnk or 1-10”
FX50
Fits under rear seat, installation may require bolts at rear of
seat be cut off, may protrude from under seat slightly.
SSC120, SSC75, FSC65,
Model#
SSC120
SSC75
Total Cu.Ft
1.20
0.75
Per Sub
0.60
0.75
Mounting Depth
4 7/8
4 7/8
Width
51 1/4
32 3/4
Depth
12 1/4
12 1/4
Front H
7 7/8
7 7/8
Rear H
6
6
Model#
FX120
FX70
FX50
Total Cu.Ft
1.20
0.70
0.50
Per Sub
0.60
0.70
0.50
Mounting Depth
5 7/16
5 5/16
5 1/16
Width
49 3/4
32
35 1/8
Height
7 1/2
5 5/8
5 3/8
Top Depth
11
10 5/8
10 5/8
Bottom Depth
11
10 5/8
10 5/8
SSC120
• 04-08 F150 Crew Cab (Super Crew)
Will fit 07 Harley Davidson model.
SSC120 - Down firing / 2-10”
SSC75
Fits under rear driver side, retains factory jack.
FORD F150 CREW CAB (SUPER CREW)
SSC75 - Down firing / 1-10”
Will fit XL, XLT, FX4, Lariat, Harley Davidson, and 60
anniversary edition models, will not fit King Ranch
FSC65
• 04 F150 Heritage
Fits under rear seat, driver’s side.
FSC65 - Upward firing / Blnk or 1-10”
Model#
SSC120
SSC75
Total Cu.Ft
1.20
0.75
Per Sub
0.60
0.75
Mounting Depth
4 7/8
4 7/8
Width
51 1/4
32 3/4
Depth
12 1/4
12 1/4
Front H
7 7/8
7 7/8
Rear H
6
6
Model#
FSC65
Total Cu.Ft
0.65
Per Sub
0.65
Mounting Depth
5 7/16
Width
25
Height
6 9/16
Top Depth
11 5/8
Bottom Depth
11 3/16
fax 877-SPKR-BOX (775-7269)
6
RS38
RS38
• 93-09 Ranger/Mazda Regular/Standard Cab
RS38 - Blnk and 10” Pairs
Fits behind seat in regular cab trucks with 60/40 bench
seat or standard bench and buckets (jack may need to be
relocated), no loss of leg room. Factory storage tray must
be removed when using two cabinets.
FORD RANGER/MAZDA REGULAR CAB
Model#
RS38
Total Cu.Ft
0.38
Per Sub
0.38
Mounting Depth
4 11/16
Width
13 1/2
Height
12 1/2
Top Depth
2 3/4
Bottom Depth
7 1/4
FRX200
FRX200
• All Years Ranger Extended Cab/Super Cab
FRX200 - Down firing/ 2-10” or 2-12”
Fits rear floor pan, will lose seating.
FORD RANGER/MAZDA EXTENDED CAB
(SUPERCAB)
Model#
FRX200
Total Cu.Ft
2.00
Per Sub
1.00
Mounting Depth
6 1/8
Width
43
Height
8
Top Depth
12
Bottom Depth
13 1/2
EST45D, EST45
EST45D
• 07-09 Explorer Sport Trac Crew Cab
EST45D - Down firing /
Blnk and 1-10
Fits under rear passenger seat, no seating lost.
EST45 - Upward firing /
Blnk, 1-8” or 10”
EST45
• 01-05 Explorer Sport Trac Crew Cab
Fits under rear passenger seat, no seating lost.
FORD EXPLORER SPORT TRAC CREW CAB
Model#
EST45D
Total Cu.Ft
0.45
Per Sub
0.45
Mounting Depth
4 3/4
Width
24 1/4
Depth
13 3/4
Front H
7
Rear H
5 1/8
Model#
EST45
Total Cu.Ft
0.45
Per Sub
0.45
Mounting Depth
5
Width
22 3/16
Height
5 5/8
Top Depth
10 1/2
Bottom Depth
10 1/2
MC170, MMC170, JW170
MC170
• All Years Mustang Convertible and Hatch
MC170 - Up firing /
Blnk, 2-10” or 12”
Slides into trunk or hatch area.
MMC170
• 95-09 Mustang Coupe
MMC170 - Down firing /
2-10” or 12”
Fits on shelf below rear deck, incredible bass,
works with Mach 460 and 1000.
FORD MUSTANG
JW170
• 95-09 Mustang Coupe
JW170 - Rear firing / 2-10”
Fits on shelf below rear deck, incredible bass,
works with Mach 460 and 1000.
Model#
MC170
Total Cu.Ft
1.70
Per Sub
0.85
Mounting Depth
6 5/16
Front Width
42
Rear Width
36 1/8
Height
7
Depth
15
Model#
MMC170
JW170
Total Cu.Ft
1.70
1.70
Per Sub
0.85
0.85
Mounting Depth
Width
35 1/2
33
Height
9 3/4
15 ¼
Top Depth
13 5/8
7 3/8
Bottom Depth
15 1/4
10 3/4
7 3/8
fax 877-SPKR-BOX (775-7269)
7
FST240
FST240
• All Dodge 1500/2500/3500 Regular Cab up to 08
• Dodge Mega Cab
Does not fit some trucks with middle console.
Console may need removing during installation.
FST240 - Blnk, 2-10 or 12"
DODGE REGULAR CAB
Model#
FST240
Total Cu.Ft
2.40
Per Sub
1.21
Mounting Depth
6 11/32
Width
55
Height
15
Top Depth
5 1/4
Bottom Depth
8 1/4
DQ50, DX140 , DX60
DQ50
• 02-09 1500 Crew Cab/ Quad Cab
• 03-09 2500/3500 Extended Cab / Quad Cab
DQ50 - Upward firing / 1 or 2-10”
DX140
• 98-02 2500/3500 Ext/Extra Cab/ Quad Cab
• 98-01 1500 Extended Cab/ Club Cab
DX140 - Down firing / 2-10”
DX60
• 95-02 2500/3500 Ext/Extra Cab/Quad Cab
• 98-01 1500 Extended Cab/ Club Cab
DODGE RAM QUAD CAB
DQ50, DX140, & DX60 custom fit under rear seat, installation
requires removal of jack kit and storage tray. Does not fit
Mega Cab.
Model#
DQ50
DX140
DX60
Total Cu.Ft
0.50
1.40
0.60
Per Sub
0.50
0.70
0.60
Mounting Depth
5 15/16
5 1/4
4 5/16
DX60 - Forward firing /
Blnk and 1-10”
Width
Height
Top Depth
Custom Fit
Custom Fit
Custom Fit
Bottom Depth
DDX75
DDX75
• 06-09 Dakota Extended Cab/ Club Cab
Fits between rear fold-down seats. Allows full use of the
back seat, no seating lost. Does not fit Quad Cab.
DDX75 - Down firing/ 1-10”
DODGE DAKOTA EXTENDED/ CLUB CAB
Model#
DDX75
Total Cu.Ft
0.75
Per Sub
0.75
Mounting Depth
9 1/2
Width
Height
Top Depth
Custom Fit
Bottom Depth
RS38
RS38
• 93-09 Dakota Crew Cab/ Quad Cab
RS38 - Blnk or 10” pairs
Fits behind rear seat, great for many tight spaces.
DODGE DAKOTA CREW CAB
Model#
RS38
Total Cu.Ft
0.38
Per Sub
0.38
Mounting Depth
4 11/16
fax 877-SPKR-BOX (775-7269)
8
Width
13 ½
Height
12 1/2
Top Depth
2 3/4
Bottom Depth
7 1/4
JW170
JW170
• All Years Jeep
JW170 - Down firing/ 2-10”
Fits behind rear seat. May not fit all 06 models.
JEEP
Model#
JW170
Total Cu.Ft
1.70
Per Sub
0.85
Mounting Depth
7 3/8
Width
33
Height
15 1/4
Top Depth
7 3/8
Bottom Depth
10 3/4
Top Depth
11 1/4
Bottom Depth
10 1/16
Top Depth
5
Bottom Depth
8
HR130
HR130
• 06-09 Honda Ridgeline Crew Cab
Fits under rear seat.
HR130 - Down firing/ 2-10”
HONDA RIDGELINE CREW CAB
Model#
HR130
Total Cu.Ft
1.30
Per Sub
0.65
Mounting Depth
5 3/4
Width
47 3/4
Height
7 1/2
TOY170
TOY170
• 95-04 Toyota Tacoma Standard/Regular Cab
TOY170 - Blnk or 2-10”
Fits behind seat, jack and Jack bracket must be removed for
proper installation. Some leg room lost after installation.
TOYOTA TACOMA STANDARD/
REGULAR CAB
Model#
TOY170
Total Cu.Ft
1.70
Per Sub
0.85
Mounting Depth
5 1/4
TOYT180
TOYT180
• 07-09 Toyota Tundra Crew Cab (Double Cab)
Width
47
Height
15 3/4
TOYT180 - Down firing/ Blnk, 2-10" and 2-12"
Fits tightly under rear seat, retains factory jack.
Will not fit CrewMax Cab.
How to tell if you have a CrewMax or Double Cab:
Double Cab has rear seats that fold up; CrewMax Cab
has rear seats that will slide, recline, & fold flat.
TOYOTA TUNDRA CREW CAB
(DOUBLE CAB)
Model#
TOYT180
Total Cu.Ft
1.34
Per Sub
0.72
Mounting Depth
4 5/16
fax 877-SPKR-BOX (775-7269)
9
Width
50 1/8
Depth
17
Front H
5 1/4
Rear H
3 7/8
NTX165
NTX165
• 04-08 Nissan Titan Extended Cab/ King Cab
Fits under rear seat. No box available for 2008.5 model.
NTX165 - Down firing/ 2-10"
NISSAN TITAN EXTENDED CAB/ KING CAB
Model#
NTX165
Total Cu.Ft
1.64
Per Sub
0.82
Mounting Depth
6 3/4
Width
52
Height
10 1/2
Front H
8 1/2
Rear H
6 3/4
NTC150
NTC150
• 04-08 Titan Crew Cab
Fits under rear seat. No box available for 2008.5 model.
NTC150 - Up firing/ 2-10" or 12"
NISSAN TITAN CREW CAB
Model#
NTC150
Total Cu.Ft
1.54
Per Sub
0.77
Mounting Depth
5 5/8
NFC55
Width
49
Depth
13
Front H
6 1/4
Rear H
6 1/4
NFC55 - Down firing / 1-8” or 10”
NFC55
• 05-09 Frontier Crew Cab
Fits under rear seat passenger side. Must remove storage
tray, jack stays in factory location.
NISSAN FRONTIER CREW CAB
Model#
NFC55
Total Cu.Ft
0.55
Per Sub
0.55
Mounting Depth
4 1/4
Width
30
Depth
12
Front H
5 1/2
Rear H
3 1/4
NFX245
NFX245
• 02-04 Frontier Extended Cab/King Cab
Fits under rear seat, will lose seating.
NFX245 - Down firing / 2-10” or 12”
NISSAN FRONTIER EXTENDED CAB/
KING CAB
Model#
NFX245
Total Cu.Ft
2.44
Per Sub
1.22
Mounting Depth
10 5/8
DDX75
Width
37
Depth
15
Front H
15 7/8
Rear H
15 7/8
DDX75 - Down firing / 1-10”
DDX75
• 06-09 Mitsubishi Raider Extended Cab
Custom fits between rear fold-down seats. No seating loss.
MITSUBISHI RAIDER EXTENDED CAB
Model#
DDX75
Total Cu.Ft
0.75
Per Sub
0.75
Mounting Depth
9½
fax 877-SPKR-BOX (775-7269)
10
Width
Height
Top Depth
Custom Fit
Bottom Depth
The Le ader in the Auto motive Sp eaker
Cab inet In dustry for 27 years.
SOUND QUALITY
SOUND DESIGN
Within these pages, discover the most comprehensive assembly of
Audio Enhancers’ innovative design is featured in 26 sub enclosures
award-winning speaker enclosures available today from any manufac-
within our Enhanced Mounting Depth Power Pocket – another Audio
turer. As the leader in the automotive speaker cabinet industry, we set
Enhancers’ first. The Power Pocket is a CNC-milled pocket in the shape
the bench mark for quality, offering only American-made products that
of a full moon or half moon within the enclosure. This innovative design
meet our own rigorous standards. Never resorting to overseas suppliers,
allows installers more mounting depth, creating greater flexibility in
and cheaper, inferior materials and workmanship, we offer products of
speaker selection. The Power Pocket will add a 1/2 inch of mounting
consistently high quality. Our cabinets are expertly crafted and acousti-
depth to 3/4-inch enclosures and a 3/8 inch depth to 5/8-inch enclosures.
cally correct, resulting in unparalleled sound quality.
The additional mounting depth translates into more power from the same
speaker enclosure. Look for our exclusive Power Pocket (PP) logo
SOUND SELECTION
throughout the catalog.
With more than two decades of manufacturing experience, we have
learned that listening and responding to our customers’ wants and needs
SOUND GUARANTEE
is absolutely imperative to success. We remain on the cutting-edge,
No other supplier delivers such an absolute guarantee. We’re so certain
always delivering our customers’ the latest innovations, by continually
our products will please that every custom-made speaker cabinet we
updating and improving our product line based on inspiration from cus-
build features a 100%-satisfaction guarantee. If a customer is not com-
tomer feedback. We strive to offer a customizable product line that meets
pletely satisfied with an AE enclosure, we will make it right or offer a full
the unique needs of every individual.
refund. Period.
No one has a greater product selection of speaker enclosures than
SOUND VALUE
Our products are seen in the winner’s circle at all levels
Audio Enhancers. Just take a look. Our cabinets are available in 130 var-
of competition … locally, regionally and nationally. As active members of
ious models with 316 customizable choices (and counting).
industry associations, our products can be found at United States Auto
This year, we have added more exact-fit vehicle-specific enclosures
Sound Competition International (USACi), International Auto Sound
to keep the pace with the ever-expanding selection of vehicles available.
Challenge Association (IASCA), the Mobile Electronics Competition
We have also expanded our already in-depth line of driver-specific,
Association (MECA) and the Mobile Enhancement Retailers Association
tuned, slot-port enclosures. Replacing models along the way in favor of
(MERA). With Audio Enhancers, every speaker cabinet we build is
newer, more efficient designs, we remain focused on our niche in the
backed by a reputation of excellence.
marketplace: to deliver the latest in speaker cabinet technology.
SOUND CHOICE
SOUND SERVICE
Please take a moment to peruse our catalog. We offer an extensive prod-
Building each speaker box as if it were for our own vehicle, our award-
uct selection, including our:
winning, custom-made speaker cabinets are backed by a solid, compa-
courtesy call from our service staff. In addition to offering better cus-
•
•
•
•
tomer service, we are driven to provide our customers quick turnaround
To find out more about Audio Enhancers’ speaker cabinets, please feel
and competitive pricing. This dedication to deliver the best service in the
free to give us a call, stop by or visit our web site.
nywide commitment to provide unsurpassed customer service. We
exceed expectations by providing an uncommon level of personal attention. For example, every order, every time, is followed up with a brief
industry doesn’t cost more; it is simply our mission to be the best.
11
Classic Series
Pro Series
Vehicle-Specific Series
Driver-Specific Series
ACCESSORIES
BAR
GRILLS
BAR10: Heavy-duty chromed 10" bar grill; 1 5/8" clearance
BBAR10: Heavy-duty matt black 10" bar grill; 1 5/8" clearance
BBAR
SWG10: Heavy-duty powder-baked 10" waffle grill; 4 clamps.
SWG12: Heavy-duty powder-baked 12" waffle grill; 4 clamps
DB3S
GC4: Plastic-toothed grill clamp
TERMINALS
DB3S: Chromed binding post accepts 10 ga. wire; spring
SWG and GC4
loaded with Banana Plug 2 7/8" opening
PORTS
PR31: 3 x 1 inch trim ring
PR35
PR35: 3 x 5 inch with trim ring
PR312: 3 x 12 inch with trim ring
RUBBER FEET:
RF15: 1.5 Inch tall rubber foot;
turn any enclosure into a down fire
ACOUSTICAL CARPET
CO150: Latex-backed premium enclosure carpet; 4 x150'; charcoal
DOOR PODS
CO151: Latex-backed premium enclosure carpet; 4 x150'; black
445DP
SPEAKER SPACERS / DOOR PODS
345DP
New speaker spacers make it easier to fit most any speaker
into various models of vehicles. The speaker spacers provide extra
depth for a perfect fit.
Spacers are available in both round and square formats, and a
range of sizes to accommodate most any make and model—from
4" to 5.25", 6.5", 8", 10", 12" and 15", as well as 8" square, 10" square,
12" square and 15" square. (Square Model #’s SPQ10, SPQ12,
SPQ15, SPQ8; Round Model #’s SPR10, SPR12, SPR15, SPR4,
SPR5.25, SPR6.5, SPR8).
245DP
SQUARE
SPEAKER
SPACERS
ROUND
SPEAKER
SPACERS
They are also available as door pods that are installed between
the speaker and the door panel. door pod speaker spacers are
available in 5.25" dual, 5.25" triple and 5.25" quad openings.
Additional technical information at www.audioenhancers.com
The Leader in the Automotive Speaker Cabinet Industry for over 26 years
fax 877-SPKR-BOX (775-7269)

AE Cross Reference 09

Transcription

Similar documents

the Driver Specific Cross Reference

Technical data