applications guide instructions

Transcription

REESE TOWPOWER
Up to 800 lb TW Up to 8000 lb GTW
1
2
3
5
4
6
7
2
1
Applications are listed alphabetically by
make, followed by model and year.
2
3
4
5
6
4
5
6
8 7
2
3
4
2 Hitch Style
Indicates Square Tube (n) design
or Round Tube (l) design.
3 Hitch Number
4 Hitch Footnotes
Footnotes reference additional information
pertinent to the installation of each hitch.
See right side of each application spread for
explanations of each abbreviation.
5 Wrenches
Listing of each size wrench needed for hitch
installation.
6 Drill Bits
On hitches that require drilling, we list
the sizes needed. "NO DRILL" is listed for
hitches that do not require drilling.
7 Installation Time
Times are based on common mechanical
practices and should be used as an estimate
as actual installation times may vary.
8 Receiver Weight Ratings
Weight Carrying refers to the total load
the hitch is capable of pulling. Weight
Distributing is the total load capacity of the
hitch when a weight distribution system is
properly used. Numbers listed are in
thousands (ie. 5 = 5,000 lb).
9 T-Connector
11Electrical Footnotes
10Standard Wire
12O.E.M. Replacement
Reese Towpower® T-connectors require no splicing
of wires. Simply unplug your vehicle's wiring harness
connector and insert the T-connector. No special
tools required.
Applies to bare wires that can be spliced into the
vehicles wiring system by using an electrical
connection device. Use the appropriate size
electrical butt style connector for best results.
IMPORTANT: Observe all safety precautions when working beneath a vehicle and eye wear protection.
APPLICATIONS GUIDE
1 Vehicle Model/Style & Years
3
FOOTNOTE ABBREVIATIONS
ø 2
No drilling required - use existing holes.5
6 8 7
n Square Tube3hitch design. 4
l Round Tube hitch design.
Frame ball mount must be used to achieve maximum weight carrying rating.
7@† Ultra
Available while supply lasts.
A 2 wire system. No Converter required, but a ModuLite® can be used.
AA Requires temporary removal of bumper during installation.
AC Hitch rated at 1,000 lbs. GTW, 100 lbs. TW.
AG Drawbar Kit & Accessory Adapter sold separately.
AI Additional installation time required.
AL Additional installation time required for vehicles equipped with load
leveling compressor.
AM Not recommended on Trofeó models prior to 1989. 1989 units require minor
fascia trim and exhaust repositioning.
AO Will not fit vehicles with twin tailpipes.
AY Does fit SE models with Sport Appearance Package, GT model or 4 Dr. STE.
B 3 wire system. Requires Converter, but a ModuLite® can be used.
BC Hitch rated at 1,500 lbs. GTW, 100 lbs. TW
BF Requires standard bumper. Will not fit with step bumper.
BN Exterior mounted plug on some or all models. May require an aftermarket
electrical mounting box or bracket. (Sold separately)
CA Models with dual exhaust require exhaust modification.
CG T-One incorporates circuit protected taillight converter.
CH T-One is equipped with circuit protected ModuLite® module.
CK Drawbar installs though fascia on SC models. Obtain customer approval.
CM OEM Style Attachments/Requires Factory Bumper For Hitch Installation.
CN Requires OEM factory bumper for hitch installation.
CP Fits All Models without Factory Installed Receiver.
CQ Will not fit with heavy duty suspension.
CS Will fit with full-size spare tire stowed under vehicle.
CT Will not fit long bed models after 1999.
CV Will not fit short wheel base with dual exhaust.
D See auto dealer for trailer tow wiring kit.
EB Factory electrical bracket will NOT fit with this hitch. Must use aftermarket
electrical box or bracket.
EF Fits all models with standard bumpers.
EG Relocation of spare tire bracket is not required. NOTE: 19mm open end style wrench
must be purchased to allow removal of spare tire after hitch installation.
EP Fascia trimming required.
F ModuLite® recommended.
FE Fascia trimming required. Allow additional
9installation10time. 11 12
FM On vehicles equipped with load leveling device, air pump mounting
modification required.
Spare6
tire repositioning
modification of spare tire carrier may be required.
5FP
8and/or7
FS Includes 2 & 4 WD models with heavy duty suspension.
FT Models with 16" spare tire must be relocated.
GC T-One is equipped with ModuLite® Lite module.
GP Hitch crosstube concealed behind bumper.
GU Will not fit vehicles with factory or aftermarket lower Fascia/Rollpan or Tube Bumper.
H 3 wire system with OEM standard 2 wire harness.
HB Slight fascia deformation may occur on some models.
HD Will not fit 6 ft. bed pickups except 6 ft. Super Cab.
HG T-One incorporates taillight converter.
HJ Per Dodge owner's manual: If trailer is equipped with more than standard lighting
(1 taillight per side), use of ModuLite® or dealer supplied harness is required.
HM Hitch crosstube is visible beneath bumper.
HX Minor exhaust modification may be required.
HY Ultra Frame ball mount DT #4283/HH #80125 cannot be used in rise position
on vehicles with step bumpers.
JF Will not fit with 16" spare tire.
JL Installation requires OEM bumper and brackets.
JR Exhaust must be temporarily lowered for installation.
JT 2WD models only.
KA Gasoline engine models only.
KH Minor heat shield modification may be required.
KK When installing on a vehicle originally equipped with an OEM hitch, OEM bumper
brackets must be purchased and installed prior to new hitch installation.
KL Hitch is designed to attach beneath the OEM hitch.
LA Optional Wider 1200mm Length Cross Bar.
LB Optional Wider 1300mm Length Cross Bar.
LS T-One incorporates low-side switching taillight converter.
Additional installation time required.
LT Requires removal of factory hitch if equipped.
MB Will not fit models equipped with air suspension package.
N DO NOT cut or splice vehicle wiring. Only use approved T-One
or see auto dealer for trailer tow wiring kit.
PA Will not fit 124" wheelbase or E-350 models.
RD For vehicles equipped with factory tow package, may require additional
components or may be used as a replacement harness.
RI Cutting of rollpan in license plate area required for receiver tube access.
Obtain customer approval first.
RLFootnotes
Short box modelsreference
require relocation ofadditional
spare tire.
RN Aftermarket spare tire repositioner may be used on 8 ft. bed models
information
to ease installation pertinent
of larger spare tires.to the installation
ROofWill
not fit Silverado SS. or Standard Wiring.
T-connector
SA Requires drilling on 6 ft. bed models.
See
right
side
SB Will not fit models
withof
shorteach
bed. application spread
SCforMinor
trimming of plastic trunk
pan required.
explanation
of each
abbreviation.
SD Hitches made before 07/21/06 are rated at 350/3500 WC.
SH Hitches made before 09/27/07 are rated at 1200/12,000 WC & 1400/14,000 WD.
SI Hitches made before 07/31/07 are rated at 350/3500 WC & 500/5000 WD.
SP Hitches made before 04/27/08 are rated at 1200/12,000 WC & 1400/14,000 WD.
SSOriginal
Hitches madeEquipment
before 03/31/08 areexact
rated at 1000/10,000
WC & 1200/12,000 WD.
replacement
SVconnectors
Trimming or removalfor
of under
body appearancefactory
panel required.
damaged
wiring
TA Trunk access required for hitch installation.
to standard
TFharness,
For 3/4 and 1snaps
ton vehiclesdirectly
only.
THfactory
Will not fit connector.
models with skid shield.
VB Will not fit vehicles with vibration damper installed at rear of frame on drivers side.
MODEL
APPLICATIONS
GUIDE
CLASS V
WIRING INSTRUCTIONS
CLASS III/IV
73
73
74
REESE TOWPOWER
REESE TOWPOWER
FootNOTE ABBREVIATIONS
ø No drilling required - use existing holes.
n Square Tube hitch design.
@ Ultra Frame ball mount must be used to achieve maximum
weight carrying rating.
† Available while supply lasts.
2 wire system. No Converter required, but a ModuLite® can
be used.
AB Requires four (4) 3/8” spacer blocks (#01077-011) for installation
(sold separately).
AC Hitch rated at 1000 lbs. GTW, 100 lbs. TW.
AF Hitch is ONLY rated for weight carrying at 3500 lbs. GTW, 350 lbs. TW
and DO NOT use w/weight distribution spring bars for this specific vehicle,
except for long bed trucks.
AL Additional installation time required for vehicles equipped with load leveling
compressor.
AP 2 wire system w/Pulse Width Modulation (PWM). Upgraded MoluLite®
required.
AW Will not fit turbo models.
BM 3 wire system. Upgraded ModuLite® HD required. Multiplex Wiring System.
BM 3 wire system w/Pulse Width Modulation (PWM). Upgraded ModuLite®
required.
BO Factory 7-Way models only
C 2 or 3 wire system, determine at install.
CC Requires minimum of 19” from end of frame rail to spring shackle bracket.
CE T-connector includes fuse(s) & relays(s), converter not required.
Standard 2 wire system at factory tow plug.
CO Will not fit 8 ft. 2500/3500 Series with HD suspension or four door Crew Cab.
06996
Will not fit with heavy duty suspension.
Will fit with full-size spare tire stowed under vehicle.
Will not fit long bed models after 1999.
Will not fit short wheel base with dual exhaust.
See auto dealer for trailer tow wiring kit.
Will not fit with tube style bumper.
Will not fit 6 ft. bed pickups.
71-77 (Standard) Van: will not fit with optional large gas tank.
74-77 (Maxi) Van: includes models with optional large gas tank.
DHCannot be installed on 1987 and later vehicles with factory step bumper
unless step bumper and its mounting brackets are permanently removed
and standard factory bumper is installed.
DS Use #33072 on 1500 models built after 11/1/02. Use #37084
on 1500 models built before 11/1/02.
DU Fascia removal required.
DV Will not fit short wheel base models.
DY Use on 1500 models built after 11/1/02.
DX Requires six 3/8” spacer blocks (#01077-011 and six 1/2-13 x 2-1/4
GRS carriage bolts (#01266-009), which are not provided (sold separately).
E ModuLite® required.
EG Relocation of spare tire bracket is not required. NOTE: 19mm open end style
wrench must be purchased to allow removal of spare tire after hitch installation.
EK Extended cab only.
EO Requires longer ball mount.
FB Will not fit vehicles fitted with optional 31” tires stowed under vehicle
FE Fascia trimming required. Allow additional installation time.
FP Spare tire repositioning and/or modification of spare tire carrier
may be required.
G Low-side switching system.
GH Will not fit models with 34” wide frames.
GO Requires hitch with packaging date code 2/15/94 or later.
GWSpare tire cannot be stowed under vehicle on short wheelbase models
equipped with 15” tires or full-size spare.
GX Requires fabrication of “L” bracket to reposition exhaust on ‘95 and later 6 ft.
box models.
GU Will not fit vehicles with factory or after market lower Fascia/Rollpan
or Tube Bumper.
Look For Our Exclusive UPRATED Hitch Designs With Increased Tongue Weight.
06996
Look For Our
Exclusive
UPRATED Hitch
Designs With
Increased
Tongue Weight.
RH Optional 06280 draw bar required (sold separately), except for models
with ZR2 & Highrider package.
RK Fits vehicles with factory and some aftermarket rollpans.
RL Short box models require relocation of spare tire.
RN Aftermarket spare tire repositioner may be used on 8 ft. bed models to ease
installation of larger spare tires.
RO Will not fit Silverado SS.
SB Will not fit models with short bed.
SC Minor trimming of plastic trunk pan required.
SD Hitches produced before 07/21/06 are rated at 350/3500 WC.
SG Hitches produced before 09/10/07 are rated
at 1000/10000 WC & 1200/12000 WD.
SH Hitches produced before 09/27/07 are rated
at 1200/12,000 WC & 1400/14,000 WD.
SI Hitches produced before 07/31/07 are rated
at 350/3500 WC & 500/5000 WD.
SN Hitches produced before 04/28/08 are rated
at 1000/10000 WC & 1200/12000 WD.
SP Hitches produced before 04/27/08 are rated
at 1200/12,000 WC & 1400/14,000 WD.
SS Hitches produced before 03/31/08 are rated
at 1000/10,000 WC & 1200/12,000 WD.
ST Will not fit 2WD models with short bed.
SU Hitches produced before 03/11/08 are rated
at 1000/10000 WC & 1200/12000 WD.
SV Trimming or removal of under body appearance panel required.
T Vans with step bumpers require longer ball mounts.
TS Hitch without electrical bracket rated at 350/3500 WC & no WD.
Hitch with electrical bracket rated at 350/3500 WC and 500/5000 WD.
TF For 3/4 and 1 ton vehicles only.
TH Will not fit models with skid shield.
UD Fascia removal required on XR & XRS models.
V For vehicles with factory installed step bumpers only.
X Minor fascia trimming required.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
A
CQ
CS
CT
CV
D
DA
DB
DG
HA External dress panel beneath 95-97 and 03-05 vehicles must be removed
for hitch installation.
HC Will not fit with mini or full size tire stowed under vehicle.
HJ Per Dodge owner's manual: If trailer is equipped with more than standard
lighting (1 taillight per side), use of ModuLite® or dealer supplied harness
is required.
HP Requires four (4) 7/16” x 1” x 2” spacer blocks (#01080-012) for installation.
(Sold separately)
J Under vehicle spare tire stowage is retained.
JL Installation requires OEM bumper & brackets.
JM Some early production 1994 models may require #74667.
JT 2WD models only.
JV Rubber air deflector/fascia must be removed or trimmed to install hitch.
K Adapter kit (#1685) required with #37081 for 1980 and later F-series pickups.
KK When installing on a vehicle originally equipped with an OEM hitch, OEM bumper brackets must be purchased and installed prior to new hitch installation.
M Will fit with heavy-duty suspension.
MX Multiplexed wiring system.
N DO NOT cut or splice vehicle wiring. Only use approved T-One or see auto
dealer for trailer tow wiring kit.
O Will not fit vehicles equipped with dual exhaust existing below the bumper.
P For 124” wheelbase and E350 models, adapter kit (2626) is required
(sold separately).
QS Hitch rated at 2500 lb GTW, 200 lb TW.
RA Do not install on 1996 models equipped with M10 fasteners.
RB Hitch installation can be made easier with a “cutter” type drill bit.
75
REESE TOWPOWER
BUICK
Allure Canada Only
1/2”
1/2”
1/2”
n 06465 Ø,GP
1/2”
14, 17mm, 7/8”
1/2”
77131
77208
77144
77208
77226
TA
10mm, 3/4”
1/2”
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,GP,I
17mm
NO DRILL
3/4”
NO DRILL
13mm, 3/4”
NO DRILL
13mm, 3/4”
NO DRILL
19mm, 3/4”
NO DRILL
10, 14, 17,
19mm
NO DRILL
3.5 5 30
15
n 44589 Ø,CS,
Ø,GP,SV
8, 10, 18mm, 3/4” NO DRILL
Ø,GP,SV
8, 10, 18mm, 3/4” NO DRILL
Ø,GP,SV
8, 10, 18mm, 3/4” NO DRILL
Ø,GP,SV
8, 10, 18mm, 3/4” NO DRILL
14, 17, 19mm
NO DRILL
30
1977
Centurion RWD
78-85
n 06003 –
Centurion FWD
86-89
n 06615 AO,GP
Centurion FWD
Centurion FWD
90-91
92-99
Century Sedan
78-81
n 06073 –
20 n 06367 GP,JR
n 06407 –
06996
n 33043 –
14, 17, 19mm 1/2”
13mm, 3/4”, NO DRILL
7/8”, T-20
4.5 –
3/4”, 7/8”
3/4”, 7/8”
9/16", 5/8”,
11/16”
9/16", 5/8”,
11/16”
7, 13, 15mm,
11/16”
3/4”, 9/16”
8, 13, 17mm, 1/2”,
T-50, T-55, 11/16”
3/4”
6
6 60
8mm, 10mm, 1/2”
3.5 4
11/16”, T-20
8, 13, 17mm, 1/2”, 11/16” 6 6
n 44178 AA,EP
T-50, T-55,
3/4”
n 44590 Ø,AA,EP,GP 8mm, 18mm NO DRILL 6 6
deep socket
–
78104
–
–
–
–
HG
HG
HG
HG
HG
HG
HG
–
HG
HG
HG
CH
CH
CH
CH
–
BN,HG
HG
–
HG
HG
CH
–
–
–
–
–
–
–
–
OEM REPLACE.
75
FOOTNOTES
–
WT. DISTRIB.
INSTALL TIME
–
WT. CARRYING
78104
7.5 45
NO DRILL
NO DRILL
DRILL BITS
–
5
19mm, 3/4”
19mm, 3/4”
WRENCHES
60
35
35
30
30
FOOTNOTES
–
–
–
–
–
–
5
5
–
–
HITCH
NUMBER
78104
78104
78104
78104
78104
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
100
–
–
–
–
–
3.5
4
4
4
45
45
45
45
Centurion RWD
1/2”
78104
78104
78104
78104
NO DRILL
25
25
25
n 06384 GP,JR
n 51183 GP,JR
n 06003 –
10, 13, 15mm,
9/16”
30
–
–
–
–
30
35
45
40
45
25
n 51093 AA,EP
n 77070 JR
78104
78104
78104
78104
–
78104
78104
78104
78104
78104
78104
3.5 5
n 44584 Ø,GP
n 44646 Ø,GP
n 44531 AA,EP
05-09
74701
74701
85721
85721
–
74661
85704
–
78002
78002
85723
NO DRILL
10, 17, 19mm NO DRILL
l 44654 Ø,HM
77231
77231
77231
77231
10, 14, 17,
19mm
10, 17mm
GP,JR
l 44562 Ø,†,JR
l 44594 Ø,CR,JR
30
n 06130 Ø
n
n
n
n
78104
78104
78104
78104
78104
78104
78104
78104
78104
–
78104
78104
78104
30
40
40
GP,JR
3/4”, 7/8”
–
–
74660
74660
74660
74660
74660
74660
74660
–
74660
74660
74660
30
30
n 51159 Ø,CS,
77033 TA
STANDARD WIRE
9/16”, 3/4”
9/16”, 3/4”
T-CONNECTOR
10mm, 3/4”, 7/8” NO DRILL
14, 17mm, 7/8”
WIRING
15
15
20
20
20
15
15
n 06996 –
n 06996 –
n 77247 Ø,HM,JR
n 77063 Ø,HM
n 77063 HM
WRENCHES
07-13
NO DRILL
FOOTNOTES
X5
3/4”
STYLE
00-06
Ø,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
X5
7/16”
NO DRILL
DRILL BITS
n
n
n
n
9/16”, 11/16”
3/4”
WRENCHES
2007
08-11
2007
08-11
04-10
BMW
†,X
Ø,JR
FOOTNOTES
328i Sedan
328i Sedan
328xi Sedan
328xi Sedan
X3
7/16”
7/16”
HITCH
NUMBER
n 77203 Ø,EP,GP
n 77210 Ø,HM,JR
n 77210 Ø,HM,JR
9/16”, 11/16”
9/16”, 11/16”
CLASS V
INSTALL TIME
STYLE
09-13
05-11
06-11
09-12
AUDI
†,X
†,X
DRILL BITS
A4 4 Dr. Sedan, Inc. Quattro
A6 4 Dr. Sedan, Inc. Quattro
A6 Avant Wagon, Inc. Quattro
Q5
NO DRILL
NO DRILL
WRENCHES
07-11
07-13
07-09
10-13
02-06
96-99
04-08
09-12
06-08
09-12
10-12
9/16”, 7/8”
9/16”, 7/8”
FOOTNOTES
MDX, All styles
MDX, except models w/ full-size spare tire
RDX
RDX
RSX
SLX, All styles
TL
TL, All styles
TSX
TSX, All styles
ZDX
Ø
Ø
HITCH
NUMBER
77025
77025
77073
77073
77073
77165
77165
IONSTALL TIME
STYLE
n
n
n
n
n
n
n
DRILL BITS
HITCH
NUMBER
97-00
2001
1997
98-99
97-99
01-03
99-03
96-01
02-04
06-10
94-01
94-01
01-06
WRENCHES
STYLE
FOOTNOTES
YEAR
1.6 EL, Canada Only
1.7 EL, Canada Only
2.2 CL
2.3 CL
3.0 CL
3.2 CL
3.2 TL
3.5 RL
3.5 RL
CSX Canada Only
Integra 2 Dr.
Integra 4 Dr.
MDX
MODEL
ACURA
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
30
30
3/8”, 1/2” 30
–
78104
–
–
–
78104
–
–
3/8”, 1/2”
30
–
78104
–
–
1/2”
40
–
78104
–
–
1/2”
–
1/2”
1/2”
10, 13, 15mm,
9/16”
1/2”
40
40
–
–
78104
78058
–
–
–
9/16”, 11/16”,
7/8”
3/8”
30
–
78013
–
–
@ Ultra Frame ball mount must be used to achieve maximum weight carrying rating.
FP Spare tire repositioning and/or modification of spare tire carrier may be required.
JT 2WD models only.
to ease installation of larger spare tires.
SS Hitches made before 03/31/08 are rated at 1000/10,000 WC & 1200/12,000 WD.
77
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
ACURA - BUICK
ACURA - BUICK
76
REESE TOWPOWER
REESE TOWPOWER
89-96
97-05
n 77109 TA
Century Estate Wagon RWD 78-81
Century Estate Wagon FWD 84-96
Century Wagon RWD
78-81
Century Wagon FWD
84-96
7/8”
1/2”
13mm
NO DRILL
3/4”, 7/8”
1/2”
GP,JR
3/4”, 7/8”
1/2”
–
9/16”, 11/16”,
7/8”
13mm, 7/8”
3/8”
NO DRILL
3/4”
1/2”
9/16”, 11/16”,
7/8”
13mm, 7/8”
3/8”
n 06054 Ø,AI,FM
n 88002 –
n 06407 –
1977
Electra RWD
78-84
n 06003 –
Electra FWD, Except T Type
Electra FWD
Electra FWD
85-90
1985
86-89
n 88002 –
n 06615 AO,GP
Electra FWD
Electra Park Ave. RWD
90-91
1977
n 06073 –
n 06073 –
n 06003 –
Electra Park Ave. RWD
78-84
n 06003 –
Electra Park Ave. FWD
85-90
86-89
n 88002 –
n 06615 AO,GP
Enclave, w/o Tow Package
Enclave, w/ Tow Package
Estate Wagon Full Size
1990
08-12
08-12
77-90
n 06073 –
La Crosse All, Except Super
05-09
La Crosse CX
10-13
n 06384 GP,JR
n 51183 GP,JR
n 06993 Ø, HM
La Crosse CXL, AWD
10-13
Ø,†,HM
n –
n 06993 HM
n 06142 –
n 06146 HM
n 06993 Ø,HM
10-13
Ø,†,HM
n –
n 06142 Ø
n 06146 Ø,HM
La Crosse CXS
10-13
n 06993 Ø,HM
Le
Le
Le
Le
1977
78-83
84-85
86-87
n
n
n
n
06003
06003
06003
06409
n
n
n
n
n
n
88002
06615
88002
06073
06615
88002
RWD
RWD
RWD
FWD
Le Sabre FWD
Le Sabre FWD
88-89
90-91
06996
–
–
–
–
40
35
30
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
WIRING
40
30
30
30
–
–
78013
78058
–
–
–
–
78104
–
–
–
78104
–
–
–
78058
–
–
–
40
35
3/8”, 1/2” 30
–
78058
–
–
–
78104
–
–
3/8”, 1/2”
30
–
78104
–
–
1/2”
40
40
–
–
78104
78104
–
1/2”
–
–
–
3/4”, 9/16”
1/2”
9/16", 5/8”,
11/16”
9/16", 5/8”,
11/16”
3/4”
3/8”, 1/2”
40
30
–
–
–
78104
–
–
–
3/8”, 1/2”
30
–
78104
–
–
1/2”
1/2”
40
40
–
78104
–
–
1/2”
40
–
78066
74682
–
–
78058
78058
–
–
–
–
85262
85262
–
3/4”
9/16", 5/8”,
11/16”
9/16", 5/8”,
11/16”
3/4”
7, 13, 15mm,
11/16”
3/4”, 9/16”
7, 13, 15mm,
11/16”
3/4”, 9/16”
NO DRILL
1/2”
l 51083 Ø,GP,JR,RT
n 06409 –
CLASS V
18mm, 3/4” NO DRILL
5
5 25
l 44569 Ø,GP,JR
l 44569 Ø,GP,JR
18mm, 3/4”
NO DRILL
18mm, 3/4”
NO DRILL
5
5
5
5
25
25
–
BN
BN
14mm, 9/16”,
11/16”
3/4”, 7/8”
7/16”
30
1/2”
78058
–
–
1/2”
13mm, 3/4 In,
7/8”, 9/16”
NO DRILL
30
30
20
78111
3/4”, 7/8”
85719
78104
CH
–
13mm, 3/4 In,
7/8”, 9/16”
13mm, 9/16”,
3/4”, 7/8”
13mm, 9/16”,
3/4”, 7/8”
13mm, 3/4 In,
7/8”, 9/16”
NO DRILL
20
20
85719
78104
CH
–
1/2”
20
1/2”
20
85719
NO DRILL
20
85719
NO DRILL
20
20
NO DRILL
20
85719
NO DRILL
20
85719
78104
–
–
–
–
78104
78104
78104
78104
–
–
13mm, 9/16”,
3/4”, 7/8”
13mm, 9/16”,
3/4”, 7/8”
13mm, 3/4 In,
7/8”, 9/16”
9/16", 5/8”, 11/16”
30
30
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
14mm, 9/16”,
7/16”
30
3/8”, 1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
–
11/16”
3/4”
AO,GP
7, 13, 15mm, 11/16” 1/2”
–
3/4”
1/2”
1/2”
1/2”
–
3/4”, 9/16”
AO,GP
7, 13, 15mm, 11/16” 1/2”
–
3/4”
1/2”
40
30
40
40
30
40
CH
78104
CH
–
CH
CH
–
–
–
–
–
–
–
78104
–
–
78104
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
Electra RWD
Sabre
Sabre
Sabre
Sabre
DRILL BITS
JR
GP,JR
n 06054 Ø,AI,FM
n 88002 –
n 06003 –
La Crosse CXL, FWD
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 06200
30 n 06384
n 51183
n 06407
CLASS III/IV
CLASS III
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Century Sedan
Century Sedan
APPLICATIONS GUIDE
CLASS II
CLASS I
79
BUICK
BUICK
78
REESE TOWPOWER
REESE TOWPOWER
92-96
Le Sabre FWD
97-99
Le Sabre All Models
00-01
n 77070 JR
n 77070 JR
10, 13, 15mm,
9/16”
10, 13, 15mm,
9/16”
1/2”
1/2”
40
n 06615 AO,GP
7, 13, 15mm,
11/16”
3/4”
1/2”
30
1/2”
n 88002 –
20 n 06367 GP,JR
n 06285 GP,JR
n 06976 HM,JR
02-05
Le Sabre Wagon Full Size
77-90
n 06409 –
Lucerne All, Except Super & Special
Edition Models
06-09
n 06976 HM,JR
n 51173 HM,JR,KH
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
–
–
13, 15mm, 9/16”,
3/4”, 7/8”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
14mm, 9/16”,
11/16”
15, 17mm,
9/16”, 3/4”
1/2”
35
–
78104
–
–
1/2”
30
1/2”
30
1/2”
30
–
78104
–
–
1/2”
30
7/16”
30
–
78058
–
–
1/2”
30
74696
78058
–
–
1/2”
30
NO DRILL
25
74696
78058
–
–
1/2”
–
–
–
1/2”
40
40
40
40
40
40
40
–
3/4”
–
–
–
–
–
–
–
–
–
78013
–
–
40
40
–
78013
–
–
NO DRILL
40
20
74682
78058
–
85262
3/8”
30
–
78058
–
–
1/8”, 7/16”, 60
9/16”
–
78058
–
–
n 06411 AI,JR,TA
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
–
78058
–
–
n 06305 AW,FE,HB,
10, 15mm, 11/16”
deep socket
10, 15mm, 11/16”
deep socket
1/8”, 7/16”, 60
9/16”
1/8”, 7/16”, 60
9/16”
–
78058
–
–
–
78058
–
–
10, 15mm, 11/16”
deep socket
10, 15mm, 11/16”
deep socket
3/4”, 7/8”
1/8”, 7/16”, 60
9/16”
1/8”, 7/16”, 60
9/16”
1/2”
35
–
78058
–
–
–
78058
–
–
–
78058
–
–
13mm, 3/4 In,
7/8”, 9/16”
13mm, 9/16”,
3/4”, 7/8”
13mm, 9/16”,
3/4”, 7/8”
9/16”, 11/16”,
7/8”
9/16”, 11/16”,
3/4”
NO DRILL
20
85724
78104
CH
–
NO DRILL
20
NO DRILL
20
85724
3/8”
30
–
78058
–
–
3/8”
40 n 51151 HM
85261
78058
BN
–
Park Ave.
97-99
Park Ave.
00-04
n 88002 –
n 06263 JR
Rainier
04-07
n 88002 –
n 06142 Ø
Regal All Models
78-87
n 06407 –
Regal 2 Dr.
88-94
n 77001 AI,JR,TA
Regal 4 Dr., Except GS/Limited
1991
n 77001 AI,JR,TA
Regal GS
91-92
Regal 4 Dr., Except GS
92-94
Regal Limited
93-94
Regal 2 & 4 Dr.
95-96
Regal (Application begins with 97-1/2)
97-04
Regal, All Models
11-13
n 06993 Ø,HM
Regal, All Except GS Models
11-13
n 06142 Ø,HM
–
3/4”, 9/16”
1/2”
–
3/4”
1/2”
–
3/4”, 9/16”
1/2”
–
3/4”
1/2”
JR
13, 15, 17mm,
7/8”
3/4”
1/2”
n 06411 AI,JR,TA
JR,TA
n 06411 AI,JR,TA
n 06305 AW,FE,HB,
JR,TA
n 06305 AW,FE,HB,
JR,TA
n 06262 JR
n 06146 Ø,HM
Regal Estate Wagon
82-83
n 06407 –
Rendezvous All, Inc. Ultra
02-07
n 06457 –
06996
78058
–
06073
88002
06073
88002
06073
88002
06263
n
n
n
n
n
n
n
20
–
–
1991
NO DRILL
40
40
–
Park Ave.
9/16”, 11/16”,
7/8”
1/2”
–
n 06125 Ø,HM,JR
l 77077 Ø,TA
10, 13, 15mm,
9/16”
78058
10-11
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
–
74696
Lucerne All Models
n 77001 AI,JR,TA
–
25
n 06125 Ø,HM,JR
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
78058
NO DRILL
08-09
1996
–
15, 17mm,
9/16”, 3/4”
15, 17mm, 9/16”,
11/16”
15, 17mm, 9/16”,
11/16”
3/4”, 9/16”
Lucerne Super & Special Edition Models
92-95
WIRING
13, 15, 17mm,
7/8”
3/4”
13mm, 9/16”,
3/4”, 7/8”
9/16”, 11/16”,
7/8”
10, 15mm, 11/16”
deep socket
1/2”
1/2”
1/2”
9/16”,
3/8”
11/16”, 3/4”
3.5
40
n 33061 Ø
15mm, 3/4”
n 44538 –
9/16”, 1/16”, 3/8”
3/4”
NO DRILL
3.5 –
55
3.5 –
40
CH
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51173 HM,JR
Park Ave.
INSTALL TIME
STYLE
1/2”
n 51173 HM,JR
Park Ave.
DRILL BITS
10, 13, 15mm,
9/16”
CLASS V
20 n 06367 GP,JR
n 06976 HM,JR
Le Sabre All Models
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Le Sabre FWD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
81
BUICK
BUICK
80
REESE TOWPOWER
REESE TOWPOWER
1977
n 06003 –
Riviera
1978
n 06003 –
Riviera
95-99
n 06285 GP,JR
Roadmaster 4 Dr. Sedan
91-96
n 06003 –
Roadmaster Estate Wagon Full Size
91-96
n 88002 –
n 06409 –
Skylark
92-98
n 88002 –
n 06027 Ø,JR,KH
Terraza All, Inc. AWD
05-07
n 06302 AL,GP,JR
Verano, All Styles
12-13
n 77269 Ø,GP
CTS
CTS 4 Dr. Sedan Only
CTS-V
CTS-V 4 Dr. Sedan Only
De Ville FWD
03-07
08-12
04-07
08-12
86-88
n
n
n
n
De Ville FWD
89-92
n 06616 –
De Ville FWD
1993
n 06616 –
De Ville Inc. Concours
94-96
n 06614 JR,TA
De Ville
De Ville
DTS
Eldorado
Eldorado
Escalade Old Body Style
97-99
00-05
06-11
92-94
95-02
99-00
n
n
n
n
n
CADILLAC
Escalade All, Inc. EXT
77143
77143
77143
77143
13mm, 11/16”
NO DRILL
40
40
40
40
40
JR,TA
11/16”
1/8”, 1/2”
JR,TA
11/16”
1/8”, 1/2”
JR,TA
11/16”
1/8”, 1/2”
JR,TA
11/16”
1/8”, 1/2”
n 06616 –
06265
06298
06298
06157
06995
9/16", 5/8”,
11/16”
9/16", 5/8”,
11/16”
13, 15mm, 9/16”,
3/4”, 7/8”
9/16", 5/8”,
11/16”
3/4”
14mm, 9/16”,
11/16”
3/4”
7mm, 10mm,
13mm, 3/4”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
Fleetwood RWD
Seville All, Inc. SLS & STS
Seville All, Inc. SLS & STS
SRX All, Except Models w/Sport Package Fascia
SRX
STS
93-96
92-97
98-04
04-09
10-12
05-11
06996
11/16”
1/8”, 1/2”
OEM REPLACE.
–
–
–
3/8”, 1/2”
30
74487
78058
–
–
1/2”
35
30
74491
78058
–
–
NO DRILL
35
40
–
78058
–
–
1/2”
40 n 51079 AL,GP,JR
85344
78058
BN
–
1/2”
40
78104
78104
78104
78104
78104
CH
–
–
–
–
–
–
7/16”
1/2”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 33094 AL,JR
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
1/2”
3.5 5
40
3/8”, 1/2”
40
74717
78033
74717
78033
–
3/8”, 1/2”
40
–
78104
–
–
3/8”, 1/2”
40
–
78104
–
–
7/8”
40
–
78104
–
–
NO DRILL
20
20
20
40
30
–
–
85778
–
–
74180
78104
78104
78104
78104
–
78058
–
BN
–
–
–
–
–
–
74682, 78058
85262
BN,RD
85262
74682, 78058
85262
BN,RD
85262
–
78104
–
–
–
78104
–
–
–
–
78104
78104
–
–
–
–
–
–
–
–
–
78104
78104
78104
78104
78104
13mm, 3/4”
NO DRILL
7/8”
7/8”
1/2”, 9/16” 5
1/2”, 9/16” 5
7 30
7 30
3/4”
1/2”
7, 13, 15mm,
11/16”
1/2”
5
5
10 15
10 15
44096
44656
37074
37072
HM
7/8”
HM
7/8”
1/2”, 9/16” 6
Ø,CN,HM
22mm, 7/8”
NO DRILL
6
7
7.5
10
10
n 44095 Ø,CN,HM
l 44668 Ø,CN,HM
n 44145 Ø,CN
22mm, 7/8”
NO DRILL
22mm, 7/8”
NO DRILL
22mm, 7/8”
NO DRILL
5
6
6
10 20
10 15
7.5 30
n
n
n
n
HM
7/8”
1/2”, 9/16” 5
1/2”, 9/16” 5
30
30
30
20
35
40
25
35
1/2”
35
3/8”, 1/2” 40
CH
CH
–
–
CH
–
–
1/2”
–
3/4”
–
10, 13, 15mm,
9/16”
3/4”
1/2”
13mm, 3/4”
NO DRILL
9/16”, 11/16”
NO DRILL
35
20
35
l 33086 Ø,JR,KH
l 44638 Ø
n 77143 JR,TA
FOOTNOTES
–
–
n 88002 –
n 06157 Ø
n 06617 Ø,EP,GP,JR
STANDARD WIRE
35
n 51201 Ø,CN,HM
n 51201 Ø,CN,HM
78-92
89-93
T-CONNECTOR
1/2”
2002
Fleetwood Brougham
Fleetwood Coupe & Sedan FWD
WT. DISTRIB.
INSTALL TIME
–
NO DRILL
3/4”
WT. CARRYING
–
NO DRILL
†,AO
DRILL BITS
–
13mm, 7/8”
–
WRENCHES
–
n 51012 HM
n 51012 HM
–
88002
88002
06616
FOOTNOTES
30
13mm, 3/4”
n
n
n
n
HITCH
NUMBER
3/8”, 1/2”
Ø
1977
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
–
Ø, JR
Fleetwood Brougham
DRILL BITS
–
NO DRILL
n 88002 –
n 06615 †,AO
WRENCHES
–
13mm, 7/8”
85-92
86-88
FOOTNOTES
–
JR
Fleetwood FWD
Fleetwood FWD
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
30
Ø
03-06
WIRING
3/8”, 1/2”
10, 13, 15mm,
9/16”
10, 13, 15mm,
9/16”
10, 13, 15mm,
9/16”
13, 15mm,
11/16”, 7/8”
13mm, 3/4”
Escalade All, Inc. EXT & ESV
CLASS V
45
13, 19mm
NO DRILL
10, 19mm
NO DRILL
3.5 5
4 5
60
15
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51102 AL,GP,JR
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Riviera
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
83
BUICK - CADILLAC
BUICK - CADILLAC
82
REESE TOWPOWER
REESE TOWPOWER
Astro Standard Body
Astro Extended Body
85-94
n
n
n
n
90-05
06227
06037
06227
06037
Ø,CR,HM
14mm, 15mm
NO DRILL
Ø,GP,HC
14mm, 15mm
NO DRILL
Ø,CR,HM
14mm, 15mm
NO DRILL
Ø,GP,HC
14mm, 15mm
NO DRILL
n 37042 AF
n 88001 –
Avalanche
Aveo 4 Dr. Sedan
Aveo 4 Dr. Sedan
Aveo 4 Dr. Sedan
Aveo 5 Dr. Hatchback
Bel Air
Bel Air
Blazer Full Size
Blazer Full Size
Blazer Full Size
Blazer Full Size
n 51201 Ø,CN,HM
03-06
–
3/4”, 7/8”
1/2”
Ø,HM,TA
3/4”
NO DRILL
Ø,HM,TA
3/4”
NO DRILL
–
3/4”, 7/8”
1/2”
n 06003 –
n 06003 –
n 88001 –
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
Blazer Downsize, All Models
n 06955 Ø,GP
n 06955 Ø,FP,GP,KK
1998
n 06955 Ø,FP,GP,KK
99-01
n 06955 Ø,FP,GP,KK
02-05
06996
n 33057 Ø,CS,GP
15, 17mm, 3/4” NO DRILL
15,18,21mm,
7/16", 1/2" 30 n 37152 –
9/16in, 11/16 in,
3/4in, T50
18mm, 7/8”
18mm, 7/8”
18mm, 7/8”
18mm, 7/8”
NO DRILL
NO DRILL
NO DRILL
NO DRILL
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
65
–
85217
–
–
15, 17mm, 3/4” 1/2”, 9/16” 3.5 6
NO DRILL 3.5 6
45
30
–
74051
–
–
3.5 6
30
5
5
10 15
n 37072 Ø,CN,HM
10 15
n
l
n
n
l
44095
44668
37072
44095
44668
22mm, 7/8”
NO DRILL
6
10 20
74682, 78058
85262
–
–
5
6
6
5
6
10
10
10
10
10
74682
78058
–
–
85709
85709
85709
85709
–
–
74425
74425
74178
78180
78013
78013
78013
78013
78058
78058
78058
78058
78058
78058
CG
BN
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Ø,CN,HM
22mm, 7/8”
NO DRILL
Ø,CN,HM
22mm, 7/8”
NO DRILL
Ø,CN,HM
22mm, 7/8”
NO DRILL
Ø,CN,HM
22mm, 7/8”
NO DRILL
Ø,CN,HM
22mm, 7/8”
NO DRILL
20
15
20
20
15
30
30
l
l
n
15 n
l
l
37051
37041
51031
51031
37051
37041
n
15 n
l
l
51031
51031
37051
37041
n
15 n
l
l
n
51031
51031
37051
37041
51031
–
3/4”, 7/8”
6
30
HM
7/8”
1/4”, 1/2”, 5
9/16”
6
30
n 44096 HM
7/8”
1/2”, 9/16” 5
7
1/2”, 9/16” 5
7 30
7 30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
1/2”, 9/16” 5
NO DRILL
4
6 15
l 33015 Ø,SD
18 mm, 7/8” NO DRILL
4
6
15
1/2”
5
5
4
4
5
5
6
6
6
6
6
6
30
30
15
15
30
30
n 33021 Ø
n 44098 Ø,HM
18mm, 1-1/8” NO DRILL
4
4
6
6
20
20
l 33015 Ø,SD
n 33021 Ø,FP,KK
n 44098 Ø,FP,
4
4
4
6
6
6
15
20
20
–
–
–
–
4
4
5
5
6
6
6
6
15
15
30
30
l 33015 Ø,SD
n 33021 Ø,FP,KK
n 44098 Ø,FP,
6
6
6
15
20
20
85262
78091
BN,RD
85262
4
4
4
4
4
5
5
4
6
6
6
6
6
15
15
30
30
15
l 33015 Ø,SD
n 33021 Ø,FP,KK 18mm, 1-1/8” NO DRILL
n 44098 Ø,FP,HM,KK 18mm, 1-1/8” NO DRILL
4
4
4
6
6
6
15
20
20
–
–
–
–
JT
18mm,
1-1/8”
3/4”
JT
3/4”
1/2”
Ø,HM
Ø, FP, HM, KK 18mm, 1-1/8” NO DRILL
FP,JT,KK
18mm, 3/4” 1/2”
FP,JT,KK
18mm, 3/4” 1/2”
Ø,HM
FP,JT,KK
18mm, 3/4” 1/2”
FP,JT,KK
18mm, 3/4” 1/2”
Ø,HM
FP,JT,KK
18mm, 3/4” 1/2”
FP,JT,KK
18mm, 3/4” 1/2”
Ø,HM
3/4”, 7/8”
3/4”, 7/8”
HM,KK
HM,KK
18mm, 7/8”
1/2”
1/2”
NO DRILL
18mm, 7/8”
NO DRILL
30
30
30
30
30
–
–
1/4”, 1/2”, 5
9/16”
–
–
7.5
7.5
7.5
10
CG
CG
5
5
1/2”
5
1/2”, 9/16” 6
7/8”
15 n 51031 Ø,HM
33042
33042
33042
37074
CG
n
n
n
n
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
7/8”
n 51012 HM
n 51012 HM
95-97
6
15, 17mm
45
30
20
20
30
n 37042 –
1/4”, 1/2”, 5
9/16”
n 33057 CR,HM
n 44010 Ø,CS,GP
3.5 6
74051
n 51201 Ø,CN,HM
77098
n 77181
n 77181
77097
NO DRILL
1/4”, 1/2”, 5
9/16”
15, 17mm, 3/4” NO DRILL
7/16", 1/2" 0
2002
04-06
2006
07-11
04-11
1977
78-81
73-75
76-84
85-91
92-94
3.5 6 30
6 65
15, 17mm
15,17,18, 19,
21, 22mm,
T-50, 9/16”,
3/4”
15,17,18, 19,
21, 22mm,
T-50, 9/16”,
3/4”
n 33057 Ø,CR,HM
WIRING
BN
BN
BN
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Avalanche
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WRENCHES
FOOTNOTES
HITCH
NUMBER
30
30
30 n 51029 CS,GP
30 n 37152 AF
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CHEVROLET
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
85
CHEVROLET
CHEVROLET
84
REESE TOWPOWER
93-96
n 77006 JR
7/8”
9/16”
40
97-02
n 77006 JR
7/8”
9/16”
40
10-11
n 77223 Ø,GP
13mm, 9/16”
NO DRILL
12-13
n 77223 Ø,GP
13mm, 9/16”
NO DRILL
n 51163 GP,JR
Cavalier Z-24
2002
n 77069 JR,KH
Cavalier All, Except LS Sport
03-05
n 77049 GP,JR
n 51163 GP,JR
Cavalier LS Sport
03-05
n 77069 JR,KH
Cavalier Z-24 (Canada Only)
03-05
n 77069 JR,KH
Celebrity Wagon
Cobalt 2 Dr., Except SS Models
Cobalt 4 Dr., Except SS Models
Cobalt Sport 2 Dr.
84-90
05-10
05-10
08-10
Cobalt Sport 4 Dr.
08-10
Cobalt SS 2 Dr., Incl. Supercharged
Models
05-10
Cobalt SS 4 Dr.
05-10
Cobalt, 2 Dr.
Cobalt, 4 Dr.
Colorado All Models
77122
77122
77132
51164
77132
51164
77132
JR
3/4”
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
78058
78058
78058
–
–
–
–
–
–
–
78058
–
–
74491
78058
–
–
–
–
–
–
–
30
30
9/16" 5/8”, 11/16” 3/8”, 1/2” 30
3/4”
1/2”
35
14mm, 9/16”,
7/16”
30
9/16" 5/8”, 11/16” 3/8”, 1/2”
9/16" 5/8”, 11/16” 3/8”, 1/2”
11/16”
3/4”
14mm, 9/16”,
11/16”
1/2”
7/16”
35
30
n 33007 –
13, 14mm,
3/4”
13/32”
3.5 10 40
30
–
78058
–
–
7/16”
40
–
78058
–
–
7/16”
40
1/2”
40
–
78058
–
–
40
–
–
78058
78058
–
7/16”
–
–
–
7/16”
40
7/16”
40
–
78058
–
–
7/16”
40
1/2”
40
–
78058
–
–
7/16”
40
–
78058
–
–
7/16”
40
1/2”
40
–
78058
–
–
1/2”
40
–
78058
–
–
40
40
25
25
25
25
25
–
78043
78035
78043
78058
78058
78058
78058
–
1/2”
BN
–
–
–
–
78035
78058
BN
–
78043
78058
BN
–
78035
78058
BN
–
78043
78035
78001
78058
78058
78013
BN
BN
–
–
85262
85262
74682, BO
85262
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
n 51164 HM,JR
n 77132 HM,JR
n 51164 HM,JR
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
13mm, 7/8”
NO DRILL
40
25
25
25
n 51074 Ø,GP
06996
HITCH
NUMBER
–
–
74487
06003
06003
06003
88002
06409
7/16”
HM,JR
2011
2011
04-07
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
–
n 06054 Ø,AI,FM
n
n
n
n
n
n
n
DRILL BITS
–
n 77049 GP,JR
n 77049 GP,JR
WRENCHES
–
95-99
2002
FOOTNOTES
–
Cavalier All, Except Z-24
Cavalier All, Except Z-24
STYLE
15
n 77101 †,TA
n 51163 GP,JR
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
–
88-90
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
DRILL BITS
CH
Cavalier 2 & 4 Dr., Except Z-24
n 77049 GP,JR
WRENCHES
78104
n 88002 –
n 06409 –
95-02
00-01
FOOTNOTES
85710
91-96
Cavalier All, Inc. RS & Z-24
Cavalier All, Inc. Z-24
HITCH
NUMBER
15
Caprice Estate Wagon
n 77069 JR,KH
INSTALL TIME
STYLE
–
77-90
95-99
DRILL BITS
–
Caprice Estate Wagon
Cavalier Z-24
WIRING
78013
n
n
n
n
n
n 51163 GP,JR
CLASS V
–
1977
78-90
91-96
13mm, 11/16”,
3/4”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Camaro Inc. Z-28 & SS, Except w/Dual
Exhaust Pipes On Drivers Side
Camaro Inc. Z-28 & SS, Except w/Dual
Exhaust Pipes On Drivers Side
Camaro All Models, except convertible &
dealer-installed ground effects
Camaro All Models, except convertible &
dealer-installed ground effects
Caprice
Caprice
Caprice
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
21, 22mm,
11/16”
NO DRILL
6
7.5 25
n 44593 Ø,GP
21, 22mm,
11/16”
NO DRILL
6
7.5 25
BN
BN
BN,CG
–
JT 2WD models only.
87
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
CHEVROLET
CHEVROLET
86
REESE TOWPOWER
13mm, 11/16”, 3/4”
n 77232 Ø,GP, †
n 77269 Ø,GP
11/16”
NO DRILL
13mm, 11/16”
NO DRILL
NO DRILL
07-09
n 51185 Ø,HM
n 06391 Ø,HM
18,19mm, 3/4”
Equinox
18,19mm, 3/4”
NO DRILL
25
25 n 51193 Ø,HM
n 51185 Ø,HM
18,19mm, 3/4”
NO DRILL
25
n 06391 Ø,HM
18,19mm, 3/4”
NO DRILL
25 n 51193 Ø,HM
n 51185 Ø,HM
18,19mm, 3/4”
NO DRILL
25
n 06099 Ø,HM
7/8”
NO DRILL
15 n
l
l
n
9/16”, 11/16”, 7/8” 3/8”
NO DRILL
30
25 n 51193 Ø,HM
51023
37051
37041
37152
Ø,HM
HM
HM
HM
n 37042 HM
n 06099 Ø,HM
00-02
6
15, 18, 21mm,
9/16In, 11/16In,
3/4In ,T50
7/8”
NO DRILL
15 n
l
l
n
51023
37051
37041
37152
Ø,HM
HM
HM
HM
n 06099 Ø,HM
l 37041 HM
n 37152 HM
n 37042 HM
06996
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/16",1/2" 30
BO
–
–
–
85732
74682,
85262
–
78058
78104
–
CH
–
–
–
–
OEM REPLACE.
85262
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
85262
3.5 4
30
–
78028
78058
78013
CG
–
–
NO DRILL
3.5 4 30
n 44630 Ø,†,HM
n 44637 Ø,HM
18,19mm, 3/4” NO DRILL
18,19mm,
3/4”
3.5 4
3.5 4
30
30
74709
78013
CE
–
18,19mm,
3/4”
NO DRILL
3.5 4 30
n 44630 Ø,†,HM
n 44637 Ø,HM
3.5 4
3.5 4
30
30
85716
78104
–
85779
n 44630 Ø,†,HM
n 37004 Ø,HM
3.5 4 30
5 10 20
85716
74659
78104
78013
–
3/4”
HG
85779
74866
–
–
HG
5
3/4”
1/2”
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”, 7/8”
NO DRILL
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
10
6
6
6
15
35
35
30
6
30
5
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”, 7/8”
NO DRILL
3/4”
1/2”
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
10
6
6
6
15
35
35
30
6
30
n 37004 Ø,HM
5
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”, 7/8”
NO DRILL
3/4”
1/2”
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
10
6
6
6
15
35
35
30
6
30
n 37004 Ø,HM
n 44028 Ø,HM
n 88001 HM
BN,CG
n 44028 Ø,HM
15, 18, 21mm, 9/16", 7/16",1/2" 30
11/16", 3/4", T50
7/8”
NO DRILL 15 n 51023 Ø,HM
l 37051 HM
78013
n 44637 Ø,HM
3/4”, 7/8”
NO DRILL
NO DRILL
5
3/4”
NO DRILL
5
n
n
10 30 n
n
41921
96921
45007
96946
@,HM, †
13/16”, 15/16” 9/16”
@,HM
13/16”, 15/16” 9/16”
Ø,#,HM,TF
3/4”
@,HM
13/16”, 15/16” 9/16”
3/4”, 7/8”
3/4”
3/4”, 7/8”
NO DRILL
NO DRILL
NO DRILL
5
5
5
NO DRILL
10 12
10 12
12 14
10 13
35 74659
35 74659
45
35 74659
10 20
85246
n 96921 @,HM
n 88001 HM
78001
3.5 4 30
n 41921 @,HM, †
2003
DRILL BITS
7.5 25
NO DRILL
7/16", 1/2" 30
n 37042 HM
Express Van Full Size
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
NO DRILL
18,19mm,
3/4”
n 44028 Ø,HM
n 88001 HM
WRENCHES
FOOTNOTES
STYLE
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
WRENCHES
FOOTNOTES
18,19mm, 3/4”
10-13
96-99
21, 22mm,
11/16”
10 30 n 45007 Ø,#,HM,TF
n 96946 @,HM
13/16”,
15/16”
13/16”,
15/16”
3/4”
13/16”,
15/16”
–
HG
–
–
HG
78013
HG
74866
9/16”
10
12 35 85246
–
HG
–
9/16”
10
12 35 85246
–
HG
–
NO DRILL
12 14 45
10 13 35 85246
9/16”
10 20
74886
n 41921 @,HM, †
13/16”, 15/16” 9/16”
10
12 35
n 96921 @,HM
13/16”, 15/16” 9/16”
10
12 35 78029
n 45007 Ø,#,HM,TF
n 96946 @,HM
3/4”
NO DRILL
13/16”, 15/16”
9/16”
12
10
14 45
13 35 78029
74051
HG
78013
–
74866
–
HG
–
10 30
JT 2WD models only.
89
APPLICATIONS GUIDE
n 06407 –
n 06391 Ø,HM
Equinox All, Except V6 Models
n 44593 Ø,GP
7.5 25
15
15
78-87
05-06
10-13
6
1/2”, 1” hole saw 35
El Camino
Equinox
Equinox All Models
NO DRILL
STANDARD WIRE
n 77260 –
21, 22mm,
11/16”
WIRING
T-CONNECTOR
97-04
87-96
11-13
HITCH
NUMBER
n 51074 Ø,CP,GP
08-12
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Colorado All Models
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
Corvette
Corsica
Cruze All Models
APPLICATIONS GUIDE
REESE TOWPOWER
CHEVROLET
CHEVROLET
88
REESE TOWPOWER
REESE TOWPOWER
HM
3/4”
HM
15,17,18,
19,21,
9/16”
22mm,T-50,
9/16”,3/4”
15,17,18, 1/4”, 1/2”, 5
19,21,
9/16”
22mm,T-50,
9/16”,3/4”
n 37042 HM
10
6
6
6
15
35
35
30
6
30
n 37004 Ø,HM
n 88001 HM
HHR
HHR SS
Impala
Impala
Impala All Models
Impala All Models
Impala SS
Kodiak C4500
Cab & Chassis w/34 Wide Frames
06-11
08-10
1977
78-85
00-05
n
n
n
n
77132
51164
77132
51164
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
EP,HM,JR
3/4”
1/2”
77082 –
51099 –
06-12
94-96
11/16”, 7/8”
1/2”
11/16”, 7/8”
1/2”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3/4”
3/4”, 7/8”
NO DRILL
5
5
n 41921 @,HM, †
n 96921 @,HM
13/16”, 15/16” 9/16”
n 45007 Ø,#,HM,TF
n 96946 @,HM
13/16”, 15/16” 9/16”
06003
06003
06389
51188
06389
51188
06003
88002
–
–
Ø,GP,JR
Ø,GP,JR
Ø,GP,JR
Ø,GP,JR
–
–
60
n 33068 †,AL
n 33068 †,AL
06996
13mm, 9/16” 1/2”
13mm, 9/16” 1/2”
–
–
85735
78058
78058
78058
–
–
–
–
–
–
74694
78013
BN
–
74487
78058
–
–
OEM REPLACE.
–
FOOTNOTES
BN
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
78058
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
15
16 35 –
–
–
–
15
16 35 –
15
16 35 –
–
–
–
15
16 35 –
–
–
–
15
16 35 –
15
16 35 –
–
–
–
15
16 35 –
–
–
–
15
16 35 –
15
16 35 –
–
–
–
15
16 35 –
–
–
–
15
16 35 –
15
16 35 –
–
–
–
15
16 35 –
–
–
–
15
16 35 –
n 96947 @
13mm, 3/4”, 9/16” NO DRILL
78043
n 96940 @
n 96940 @
n 06022 Ø,JR
–
–
n 41940 @, †
99-10
l 77259 AI
BN
–
n 96947 @
95-00
90-92
1993
78058
–
n 96940 @
Lumina All Models
Lumina APV Van
Lumina APV Van
78043
14 45
13 35 78029
74051
16 35 –
n 41940 @
99-10
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
–
15
n 96947 @
n 06411 AI,JR,TA
HG
21mm,
9/16”
13/16”, 7/8”
n 41940 @, †
99-10
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
13mm, 3/4”
1/2”
30
–
n 41940 @, †
n 41940 @
n 77001 AI,JR,TA
–
12
10
30
30
3/4”
NO DRILL 30
3/4”
NO DRILL 30
3/4”
NO DRILL 30
3/4”
NO DRILL 30
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
3/4”
1/2”
35
99-10
90-94
NO DRILL
9/16", 5/8”, 11/16” 3/8”, 1/2”
99-10
Lumina All, Except Z-34
3/4”
9/16", 5/8”, 11/16” 3/8”, 1/2”
n 96940 @
Kodiak C8500
CH
12 35
12 35 78029
25
25
25
35
n
n
20 n
20 n
n
n
n
n
78058
10
10
7/16", 1/2" 30
n 96947 @
Kodiak C7500
13/16”, 15/16” 9/16”
78029
10 30
n 96940 @
Kodiak C6500
DRILL BITS
10 20
n 96947 @
Kodiak C5500
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
NO DRILL
3.5 3.5 30
3.5 3.5 30
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
–
–
–
–
–
–
78058
–
–
–
–
74492
78058
78058
78058
–
–
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 44028 Ø,HM
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
5
1/2”
5
1/4”, 1/2”, 5
NO DRILL
1/2”
STANDARD WIRE
3/4”, 7/8”
3/4”
WIRING
T-CONNECTOR
Ø,HM
HM
DRILL BITS
51023
37051
37041
37152
WRENCHES
15 n
l
l
n
FOOTNOTES
DRILL BITS
NO DRILL
HITCH
NUMBER
7/8”
CLASS V
INSTALL TIME
STYLE
n 06099 Ø,HM
04-13
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
91
CHEVROLET
CHEVROLET
90
REESE TOWPOWER
78-83
97-03
04-07
06-07
08-12
08-12
04-05
2008
Monte Carlo
Monte Carlo All, Inc. Z-34
Monte Carlo Inc. SS (Will not fit SS
Sport Appearance Pkg.)
Monte Carlo Inc. SS (Will not fit SS
Sport Appearance Pkg.)
Orlando, Canada Only
Pickup, C/K Series w/6 ft. Bed
n 77076 Ø,GP
13mm, 3/4”
13mm, 3/4”
NO DRILL
NO DRILL
n
15 n
n
n
n
n
15 n
n
06407
06249
06988
06988
06658
06658
06249
06988
78-88
95-99
00-05
l 77259 AI
l 77185 TA
13mm, 3/4”
1/2”
7/8”
1/2”
n 77268 Ø,HM,JR,KH 13mm, 11/16”
NO DRILL
–
9/16”, 11/16”, 7/8” 3/8”
Ø,HM
13mm, 9/16”,
NO DRILL
3/4”, 7/8”
9/16”, 11/16”, 7/8” 3/8”
13mm, 7/8”
–
30
60
30
n 06358 Ø,JR
13mm, 7/8”
–
30
13mm, 3/4”, 9/16” NO DRILL
OEM REPLACE.
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
3.5 3.5 30
–
–
–
BN
–
–
–
–
–
–
–
–
78013
BN
–
74716
74716
–
78013
78013
–
BN
BN
–
–
–
–
–
–
78058
78058
78013
–
–
–
–
–
78058
–
–
–
74425
78058
78058
–
BN
–
–
74178
78058
BN
–
–
BN
BN
BN
–
–
–
–
–
35
n 33065 CQ,DX,FP
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU,
HM,HX
n 44109 CQ,FP,GP,
GU,HX
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU,
HM,HX
n 44109 CQ,FP,GP,
GU,HX
Pickup, C/K Series w/6 ft. Bed 85-87
1/2”
5
5
6
8 30
8 40
10 30
1/2”
6
10 30
1/2”
1/2”
5
6
8 40
10 30
1/2”
6
10 30
3/4”, 7/8”
1/2”
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”, 7/8”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
2 Dr. Extended Cab, Inc. Sportside Fenders
n 41909 @,EK,
13, 18, 19mm,
13/16”, 15/16”
9/16”
10
13 30 85741
78058
BN
–
n 96909 @,EK,
13, 18, 19mm,
13/16”, 15/16”
9/16”
10
13 30 85741
–
BN
–
–
HM,SS, †
HM,SS
2 Dr. Regular & Extended Cabs, Inc. Sportside Fenders
l 37069 –
n 37096 CA,HX
n 51022 Ø,GP
n 51016 HM,FP
n 51017 GP,FP
n 51021 Ø,HM,J
Equipped w/Aftermarket Roll Pan
Regular & Extended Cabs, Inc. Sportside Fenders
w/10 Deep Drop Bumper
9/16”, 3/4” 1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18,
19mm, 3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 7/8”
5
1/4”, 1/2”, 5
9/16”
15/16", 3/4” 5/8”
7
12 40
85741
78058
BN
l 37094 –
15/16", 3/4” 5/8”
7
12 40
74180
78058
99-00 Classic –
Only
5
10 25
6
10 30
6
10 30
5
5.5 40
85741
78058
BN
–
6
10 20
85741
78058
BN
–
7.5 40
6.5 90
NO DRILL
5
10 20
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
5
10 40
5
10 20
NO DRILL
l 37034 Ø
n 44105 Ø,GP
13, 18, 19mm, NO DRILL
3/4”, 7/8”
n 44108 CQ,FP,GU, 18mm, 3/4” 1/2”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
deep socket
n 96522 CO,HK
n 37080 Ø,FS,J
06996
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
DRILL BITS
13mm, 9/16” 1/2”
1/2”
n 06407 –
30 n 06022 Ø,JR
20 n 06358 Ø,JR
06-07
2012
67-72
73-84
06388
06388
06407
06146
n 33068 †,AL
40
WRENCHES
25
25
30
20
n
n
n
n
FOOTNOTES
1/2”
1/2”
04-05
06-07
78-83
2013
HITCH
NUMBER
3/4”
3/4”
n 06988 JR,X
STYLE
–
–
2008
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
74716
–
JR
DRILL BITS
50
GP,JR,RB
GP,JR,RB
WRENCHES
13mm, 11/16”, 3/4” 3/8”
JR
JR,X
FOOTNOTES
78058
–
78013
78013
78058
78104
–
78013
13mm, 3/4”
HITCH
NUMBER
–
–
74716
74716
78066
–
–
74716
–
–
5, 10, 13mm, 7/8” #11 (.191
DIA.), 1/2”
9/16”, 11/16”, 7/8” 3/8”
INSTALL TIME
STYLE
30
20
13mm, 11/16”, 3/4” 3/8”
40
13mm, 11/16”, 3/4” 3/8”
50
11/16”, 3/4”
1/2”, 3/8” 45
11/16”, 3/4”
1/2”, 3/8” 45
13mm, 3/4”
1/2”
20
13mm, 11/16”, 3/4” 3/8”
40
FOOTNOTES
78058
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
74492
n 06091 AL,GP
n 77076 Ø,GP
WIRING
STANDARD WIRE
Malibu All Models
Malibu 4 Dr.
Malibu 4 Dr. Sedan Only
Malibu SS 4 Dr. Sedan Only
Malibu All, Except LTZ
Malibu LTZ
Malibu Classic 4 Dr. Old Body Style
Malibu Classic 4 Dr. Sedan Only
(Old Body Style)
Malibu Classic SS 4 Dr. Sedan
Only (Old Body Style)
Malibu Maxx
Malibu Maxx All, Except SS
Malibu Wagon
Malibu, All Styles
CLASS V
T-CONNECTOR
94-96
STYLE
YEAR
MODEL
Lumina APV Van
CLASS III/IV
CLASS III
FOOTNOTES
CLASS II
CLASS I
7/8”
JT 2WD models only.
93
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
CHEVROLET
CHEVROLET
92
REESE TOWPOWER
REESE TOWPOWER
5
10 40
n 37087 FP
3/4”, 7/8”
1/2”
6
10 45 n 96938 @,GP
13/16”, 7/8” 9/16”
12
15 40
n 41940 @, †
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35
15
16 35
15
16 35
n 96940 @
n 96947 @
n 37081 M
n 33065 FP
n 37087 FP
n 51017 CQ,GP,JT
n 88001 –
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/16", 1/2"
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
5
10 40
10 30
–
78058
–
–
3/4”, 7/8”
1/2”
8 30
10 45
78058
BN
–
1/2”
5
6
74425
3/4”, 7/8”
BN
BN
n 44108 FP,GU,
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
1/2”
6
10 30
1/2”
6
10 30
n 37081 M
n 33065 FP
n 37087 FP
n 51016 CQ,HM,JT
n 51017 CQ,GP,JT
BN
–
–
–
15
16 35 74425
–
BN
–
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
5
10 40
21, 24mm, 11/16”
13/16”, 7/8”
15
BN
74425
78058
BN
–
3/4”, 7/8”
1/2”
8 30
10 45
78058
BN
–
1/2”
5
6
74178
3/4”, 7/8”
BN
BN
n 44108 FP,GU,
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
1/2”
6
10 30
1/2”
6
10 30
13/16”, 7/8” 9/16”
13/16”, 7/8” 9/16”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
12
12
15
15 40 74178
15 40 74178
16 35 74178
–
–
–
BN
–
–
–
15
16 35 74178
–
BN
–
7/16", 1/2" 35
74178
w/Deep Drop Bumper
4 Dr. Crew Cab
n 51017 CQ,GP,JT
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
5
10 40
15
BN
5
10 40
74178
78058
BN
–
n 33065 FP
3/4”, 7/8”
1/2”
5
8
85741
78058
BN
–
n 37087 FP
3/4”, 7/8”
1/2”
6
10 45
BN
BN
30
n 44108 FP,GU,
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
1/2”
6
10 35
1/2”
6
10 35
13/16”, 7/8” 9/16”
13/16”, 7/8” 9/16”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
12
12
15
15 40 74178
15 40 74178
16 35 74178
–
–
–
BN
–
–
–
15
16 35 74178
–
BN
–
35
74178
n 96947 @
16 35 74178
7/8”
n 96940 @
n 51016 CQ,HM,JT
21, 24mm, 11/16”
13/16”, 7/8”
n 37081 M
n 41938 @,GP, †
n 96938 @,GP
n 41940 @, †
7/16", 1/2"
16 35 74425
10 40
n 96947 @
06996
–
–
–
5
n 96940 @
15, 18, 21mm, 9/16",
11/16", 3/4", T50
15 40 74425
15 40 74425
16 35 74425
7/8”
n 41938 @,GP, †
n 96938 @,GP
n 41940 @, †
n 88001 –
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
12
12
15
74425
w/Deep Drop Bumper
15, 18, 21mm, 9/16",
11/16", 3/4", T50
13/16”, 7/8” 9/16”
13/16”, 7/8” 9/16”
35
n 96947 @
n 88001 –
–
5
n 96940 @
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
–
7/8”
n 41938 @,GP, †
n 96938 @,GP
n 41940 @, †
n 51016 CQ,HM,JT
–
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35 74178
BN
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
w/Deep Drop Bumper
OEM REPLACE.
15 40 –
FOOTNOTES
12
STANDARD WIRE
13/16”, 7/8” 9/16”
30 n 41938 @,GP, †
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
8
DRILL BITS
5
WRENCHES
1/2”
FOOTNOTES
3/4”, 7/8”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
n 33065 FP
DRILL BITS
10 40
WRENCHES
WT. CARRYING
n 51017 CQ,GP,JT
5
FOOTNOTES
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
STYLE
DRILL BITS
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
WIRING
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
WRENCHES
n 51016 CQ,HM,JT
HITCH
NUMBER
FOOTNOTES
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
95
CHEVROLET
CHEVROLET
94
REESE TOWPOWER
REESE TOWPOWER
n 37096 CA,HX
15,17,18,
19,21, 22mm,
9/16”,3/4”
1/4”, 1/2”,
9/16”
5
85741
78058
BN
–
l 37034 Ø
15/16", 3/4” 5/8”
7
12 40
l 37094 –
15/16", 3/4” 5/8”
7
12 40
74180
78058
99-00
Classic
Only
–
7.5 40
6.5 90
n 41901 @,DB,
18, 19mm, 9/16”
GP,SN, †
13/16”, 7/8”
n 96901 @,DB, GP,SN 18, 19mm, 9/16”
13/16”, 7/8”
n 51016 HM
n 51017 GP
13, 18,
19mm, 3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
NO DRILL
5
10 20
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
5
10 40
5
10 20
n 44105 Ø,GP
3/4”, 7/8”
18mm, 3/4” 1/2”
n 44108 FP,GU,
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
deep socket
5
10 25
6
10 30
6
10 30
n 45006 #,TF
n 51021 Ø,HM,J
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
13, 18,
NO DRILL
19mm, 7/8”
3/4”
1/2”
13 30 85741
–
BN
–
10
13 30 85741
–
BN
–
12
14 45
7/16", 1/2" 35
74180
Regular & Extended Cabs, w/10 Deep Drop Bumper
4 Dr. Crew Cab
n 96522 CO,HK
l 37069 Ø
n 37096 CA,HX
9/16”, 3/4” 1/2”
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
5
5.5 40
85741
78058
BN
–
n 37080 Ø,FS,J
7/8”
6
10 20
85741
78058
BN
–
n 36007 Ø
18mm, 3/4”
5
10 40
85741
78058
BN
–
l 37034 Ø
15/16", 3/4” 5/8”
7
12 40
l 37094 Ø
15/16", 3/4” 5/8”
7
12 40
74180
78058
99-00
Classic
Only
–
NO DRILL
7.5 40
6.5 90
n 41901 @,DB,
18, 19mm, 9/16”
GP,SN, †
13/16”, 7/8”
n 96901 @,DB, GP,SN 18, 19mm, 9/16”
13/16”, 7/8”
n 51022 Ø,GP
13, 18,
NO DRILL
19mm, 3/4”
n 51016 HM
13, 18,
19mm, 3/4”,
13/16”
13, 18,
19mm, 3/4”,
13/16”,
7/8”
13, 18,
19mm, 7/8”
5
10 20
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 44105 Ø,GP
3/4”, 7/8”
5
n 51017 GP
n 51021 Ø,HM,J
4 Dr. Crew Cab, w/10 Deep Drop Bumper
85-00
Pickup, C/K Series, Cab &
Chassis w/34 Wide Frames
NO DRILL
5
13 30 85741
BN
10
13 30 85741
BN
3/4”
1/2”
12
14 45
10 40
10 20
n 37080 Ø,FS,J
7/8”
6
10 20
–
–
–
–
n 41938 @,CC, †
13/16”, 7/8” 9/16”
12
15 40 –
–
–
–
n 96938 @,CC
n 41940 @, †
13/16”, 7/8” 9/16”
12
15
15 40 –
16 35
–
–
–
15
16 35 –
–
–
–
15
16 35 –
n 96940 @
n 96947 @
10
10 25
n 45006 #,TF
06996
10
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51022 Ø,GP
OEM REPLACE.
10 40
FOOTNOTES
5
NO DRILL
WT. DISTRIB.
INSTALL TIME
18mm, 3/4”
WT. CARRYING
n 36007 Ø
DRILL BITS
–
WRENCHES
BN
FOOTNOTES
78058
HITCH
NUMBER
85741
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
10 40
DRILL BITS
5
WRENCHES
7/8”
FOOTNOTES
STANDARD WIRE
5
T-CONNECTOR
9/16”, 3/4” 1/2”
WIRING
n 37081 M
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
4 Dr. Crew Cab w/Deep Drop Bumper
2 Dr. Regular & Extended Cabs
l 37069 Ø
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
97
CHEVROLET
CHEVROLET
96
REESE TOWPOWER
REESE TOWPOWER
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL
6
10.5 15
NO DRILL
6
7.5 15
NO DRILL
7.5 12 20
7 12 25
n 37016 Ø,RO
l 37034 Ø,RO
l 37069 Ø,RO
n 37096 Ø,JL,RO
9/16”, 3/4” 1/2”
15,17,18,
19,21,
22mm,
9/16”,3/4”
5
1/4”, 1/2”, 5
9/16”
15/16", 3/4” 5/8”
n 88001 DB,RO
15, 18, 21mm,
9/16", 11/16",
3/4", T50
NO DRILL
5
7.5 15
l 37094 Ø,RO
15/16", 3/4” 5/8”
7
12 25
l 44564 Ø,JL,RO
7/8”
6
8
21mm, 7/8”
NO DRILL
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL
6
10.5 15
l 44563 Ø,JL
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL
6
10.5 15
NO DRILL
7.5 12 20
6 7.5 15
l 37069 Ø
n 37096 Ø,JL,RO
9/16”, 3/4” 1/2”
5
15,17,18,
19,21,
22mm,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
21mm,
3/4”,7/8”
NO DRILL
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
7
7
12 25
12 25
99-00
Classic
Only
–
5
6
8
l 51081 Ø,RT,JL
l 51072 Ø,RT,JL
7.5 15
l 44564 Ø,JL
21mm,
3/4”,7/8”
NO DRILL
9/16”, 3/4” 1/2”
21, 22mm,
3/4”
21mm,
3/4”,7/8”
5
5
7.5 15
l 33093 Ø,JL
7/8”
78071
–
BN,RD
–
78071
–
BN,RD
–
12
14 20
15
7/16", 1/2" 35
Pickup, Silverado 2500 LD 99-02
6.6 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan
7/8”
6
21mm, 3/4”
8
15
n 37016 Ø
l 37034 Ø,RO
15/16", 3/4” 5/8”
7.5 12 20
7 12 25
l 37094 Ø
15/16", 3/4” 5/8”
7
NO DRILL
78071
–
BN,RD
–
78071
–
BN,RD
–
NO DRILL
6
10.5 15
l 44563 Ø,JL
NO DRILL
5
7.5 15
l 44564 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, 3/4” NO DRILL
12 25
74180
–
99-00
Classic
Only
–
6
10.5 15
6
8
6
7.5 15
n 41932 Ø,@, HM,JL, † 21mm, 7/8” NO DRILL
n 96932 Ø,@, HM,JL 21mm, 7/8” NO DRILL
12
12
14 20
14 20
n 45009 Ø,#,TF
12
14 20
15
21mm, 3/4”
NO DRILL
85262
78071
RD
7.5 25
n 44619 Ø,CM
06996
RD
85262
l 37069 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
7.5 25
6.5 35
7/16", 1/2" 35
l 51072 Ø,RT,JL
n 88001 DB
74180
14 20
15
l 51072 Ø,RT,JL
8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan
6.6 ft. Bed, 2 & 4 WD
–
15
l 51072 Ø,RT,JL
l 37034 Ø,RO
l 37094 Ø,RO
15, 18, 21mm,
9/16", 11/16",
3/4", T50
–
85262
n 37016 Ø
n 44619 Ø,CM
n 88001 DB,RO
12
7/16", 1/2" 35
8 ft. Bed, 2 & 4 WD
–
RD
–
BN,RD
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
JL,RO
21mm,
3/4”,7/8”
–
7.5 25
6.5 35
n 96932 Ø,@,HM,
l 51072 Ø,RT,JL
OEM REPLACE.
l 44563 Ø,JL,RO
FOOTNOTES
10.5 15
STANDARD WIRE
6
15
T-CONNECTOR
NO DRILL
WT. DISTRIB.
INSTALL TIME
21, 22mm,
3/4”
WT. CARRYING
l 51081 Ø,RT,JL,RO
DRILL BITS
8
WRENCHES
6
FOOTNOTES
7/8”
HITCH
NUMBER
l 33093 Ø,JL
DRILL BITS
STYLE
7.5 15
WRENCHES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
FOOTNOTES
DRILL BITS
NO DRILL
HITCH
NUMBER
WRENCHES
21mm,
3/4”,7/8”
HITCH
NUMBER
l 51072 Ø,RT,JL,RO
n 44619 Ø,CM,RO
WIRING
FOOTNOTES
6.6 ft. Bed, 2 & 4 WD
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
99
CHEVROLET
CHEVROLET
98
REESE TOWPOWER
REESE TOWPOWER
7.5 25
10.5 15
n 37016 Ø
l 37034 Ø,RO
21mm, 3/4”
15/16", 3/4” 5/8”
7.5 12 20 n 96932 Ø,@, HM,JL 21mm, 7/8” NO DRILL
7 12 25 n 45009 Ø,#,TF
12
12
14 20
14 20
NO DRILL
5
7.5 15
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
6
10.5 15
6
8
6
7.5 15
l 44564 Ø,JL
n 44619 Ø,CM
15, 18, 21mm,
9/16", 11/16",
3/4", T50
85262
Pickup, Silverado 1500 HD 01-02
6.6 ft. Bed, 2 & 4 WD
n 96944 Ø, @, CS, FS, 18, 21, 22mm, NO DRILL
HM, LT
l 37069 Ø
n 37096 Ø,JL
l 51081 Ø,RT,JL
l 51072 Ø,RT,JL
21mm,
NO DRILL
3/4”,7/8”
9/16”, 3/4” 1/2”
15,17,18,
19,21,
22mm,
9/16”,3/4”
21, 22mm,
3/4”
21mm,
3/4”,7/8”
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6
8
n 37016 Ø
l 37034 Ø
15/16", 3/4” 5/8”
7
12 25
n 88001 DB
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6.5 35
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25
NO DRILL
6
10.5 15
l 44563 Ø,JL
6
10.5 15
NO DRILL
5
7.5 15
l 44564 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
6
8
6
7.5 15
21, 22mm,
3/4”, 7/8”
n 37096 Ø,JL
15,17,18,
19,21,
22mm,
9/16”,3/4”
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
15,17,18,
19,21,
22mm,
9/16”,3/4”
21, 22mm,
n 51050 SA
3/4”, 7/8”
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
06996
14 20 78071
NO DRILL
12
14 20
85217
–
BN,RD
–
(with amber –
bulbs)
5
10 20
l 44577
1/4”, 1/2”, 5
9/16”
6.5 40
n 44657 HM,SA
5
7.5 20
NO DRILL
NO DRILL
Ø, CS, FS, JL, LT
7/16", 1/2" 35
1/4”, 1/2”, 5
9/16”
6.5 40
NO DRILL
5
10 20
21, 22mm,
3/4”
NO DRILL
6
11 20 n 41939 Ø, @, CS, FS, 18, 21, 22mm, NO DRILL
12
15 25 78071
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25
13
16 25
13
17 25
HM, LT, †
HM, LT
13/16”, 7/8”
13/16”, 7/8”
HM, LT
13/16”, 7/8”
n 45022 Ø, #, CS, FS, 18, 21mm NO DRILL
LT, TF
NO DRILL
5
7.5 20
13
16 25
12
15 25 78071
HM, LT
l 44577 Ø, CS, FS,
JL, LT
n 44657 Ø,HM,SA
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
NO DRILL
6
1/2”
6
–
15
RD
–
85262
n 37096 Ø,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
12
7/16", 1/2" 35
8 ft. Bed, 2 & 4 WD
n 88001 DB
NO DRILL
RD
85262
n 51050 SA
15, 18, 21mm,
9/16", 11/16",
3/4", T50
16 25
7/16", 1/2" 35
6.6 ft. Bed, 2 & 4 WD
n 88001 DB
21mm, 7/8”
HM,JL, †
7.5 12 20 n 96932 Ø,@, HM,JL 21mm, 7/8”
1/4”, 1/2”, 5
9/16”
13
13/16”, 7/8”
15 n 41932 Ø,@,
7/8”
n 44619 Ø,CM
–
15
7/16", 1/2" 35
l 51072 Ø,RT,JL
BN,RD
HM, LT, †
12 20 n 96939 Ø, @, CS, FS,
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
13/16”, 7/8”
13/16”, 7/8”
13/16”, 7/8”
18, 21mm
NO DRILL
12
15 25
13
17 25
18, 21mm
18
18 25
NO DRILL
85262
BN,RD
–
RD
–
BN,RD
–
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 DB
NO DRILL
–
OEM REPLACE.
WT. DISTRIB.
INSTALL TIME
14 20 78071
FOOTNOTES
WT. CARRYING
12
HM,JL, †
STANDARD WIRE
DRILL BITS
NO DRILL
15 n 41932 Ø,@,
T-CONNECTOR
WRENCHES
21mm, 7/8”
8
FOOTNOTES
6
HITCH
NUMBER
5
6
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
NO DRILL
9/16”, 3/4” 1/2”
21, 22mm,
3/4”
21mm,
3/4”,7/8”
WIRING
7/8”
DRILL BITS
l 33093 Ø,JL
NO DRILL
WRENCHES
7.5 15
21mm,
3/4”,7/8”
FOOTNOTES
STYLE
l 51072 Ø,RT,JL
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
l 37069 Ø
l 51081 Ø,RT,JL
5
DRILL BITS
FOOTNOTES
HITCH
NUMBER
l 51072 Ø,RT,JL
WRENCHES
8 ft. Bed, 2 & 4 WD
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
101
CHEVROLET
CHEVROLET
100
REESE TOWPOWER
REESE TOWPOWER
NO DRILL
5
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
15, 18, 21mm,
9/16", 11/16",
3/4", T50
HITCH
NUMBER
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
NO DRILL
6
10.5 15 n 41932 Ø,@,
5
7.5 25
n 44619 Ø,CM
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL
6
NO DRILL
7.5 12 20 n 45009 Ø,#,TF
7 12 25
7 12 25
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 44564 Ø,JL
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
7/8”
6
15
21mm, 7/8”
HM,JL, †
7.5 15 n 96932 Ø,@, HM,JL 21mm, 7/8”
8
21mm, 3/4”
NO DRILL
12
14 20
NO DRILL
12
14 20
NO DRILL
12
14 20
85217
–
(with amber –
bulbs)
BN,RD
–
–
BN,RD
–
l 33093 Ø,JL
7/8”
6
8
15 n 41932 Ø,@,
NO DRILL
12
14 20 78071
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
NO DRILL
6
8
15 n 96932 Ø,@, HM,JL 21mm, 7/8” NO DRILL
12
14 20
5
7.5 25
n 44619 Ø,#,TF
NO DRILL
12 14 20 n 45009 Ø,#,TF
12
14 20
5
7.5 15
n 37016 Ø
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL
7.5 12 20
NO DRILL
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
7/8”
7
7
6
HM,JL, †
21mm, 7/8”
21mm, 3/4”
NO DRILL
12 25
12 25
7.5 15
85262
–
BN,RD
–
–
BN,RD
–
–
(with amber –
bulbs)
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
21mm, 3/4”,
7/8”
NO DRILL
6
8
NO DRILL
12
14 20 78071
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL
6
10.5 15 n 96932 Ø,@, HM,JL 21mm, 7/8” NO DRILL
12
14 20
5
7.5 25
n
n
l
l
Ø,CM
21, 22mm, 3/4” NO DRILL
Ø
21mm, 3/4”
6
7.5
7
7
7.5
12
12
12
15
20
25
25
6
8
15
l 51072 Ø,RT,JL
7/16", 1/2" 35
03-05
15,17,18,
19,21,
22mm,
9/16”,3/4”
21mm,
3/4”,7/8”
1/4”, 1/2”, 5
9/16”
6.5 35
5
7.5 15
NO DRILL
44619
37016
37034
37094
NO DRILL
Ø,RO
15/16", 3/4” 5/8”
Ø
15/16", 3/4” 5/8”
l 44564 Ø,JL
7/8”
15 n 41932 Ø,@,
HM,JL, †
21mm, 7/8”
85217
85262
78071
RD
78071
l 51072 Ø,RT,JL
n 37096 Ø,JL
06996
RD
–
7.5 15
21mm,
3/4”,7/8”
–
78071
5
n 37069 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
BN,RD
NO DRILL
03-04
n 88001 DB
–
15
7/16", 1/2" 35
03-05
RD
78071
21mm,
3/4”,7/8”
l 37034 Ø,RO
l 37094 Ø
l 44564 Ø,CM
Pickup, Silverado 1500 HD
17 25
l 51072 Ø,RT,JL
l 51072 Ø,RT,JL
Pickup, Silverado 2500 LD
6.6 ft. Bed, 2 & 4 WD
13
85262
l 37069 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15 25
7/16", 1/2" 35
8 ft. Bed, 2 & 4 WD
n 88001 DB
12
–
RD
–
BN,RD
–
JT 2WD models only.
APPLICATIONS GUIDE
l 51072 Ø,RT,JL
n 37016 Ø
l 37034 Ø
l 37094 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
13/16”, 7/8”
18, 21mm
NO DRILL
85262
l 37069 Ø
n 88001 DB
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
7/16", 1/2" 35
6.6 ft. Bed, 2 & 4 WD
APPLICATIONS GUIDE
3/4”
BN,RD
OEM REPLACE.
l 51073 Ø, RT, CS, FS, 21, 22mm,
–
FOOTNOTES
15 25 78071
13/16”, 7/8”
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
12
HM, LT, †
T-CONNECTOR
WT. CARRYING
DRILL BITS
WRENCHES
6
WRENCHES
FOOTNOTES
NO DRILL
FOOTNOTES
STYLE
21, 22mm,
3/4”
JL, LT
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
l 44577 Ø, CS, FS,
DRILL BITS
DRILL BITS
10 20
HITCH
NUMBER
WRENCHES
5
FOOTNOTES
NO DRILL
JL, LT
n 88001 DB
WIRING
21, 22mm,
3/4”, 7/8”
n 51050 SA
01-02
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Silverado 3500
Series 8 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
103
CHEVROLET
CHEVROLET
102
REESE TOWPOWER
REESE TOWPOWER
21, 22mm, 3/4” NO DRILL
6
10.5 15 n 41932 Ø,@,HM,
5
7.5 25
n 44619 Ø,CM,RO
21, 22mm, 3/4” NO DRILL
6
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
6.5 35
n 37016 Ø,RO
21mm, 3/4”
7.5 12 20
7.5 15
l 37034 Ø,RO
15/16", 3/4” 5/8”
7
12 25
15/16", 3/4” 5/8”
7
6
12 25
8 15
n 37096 Ø,JL,RO
l 51072 Ø,RT,JL
HITCH
NUMBER
l 37094 Ø,RO
l 44564 Ø,JL,RO
8 ft. Bed, 2 & 4 WD
7/8”
21mm, 7/8”
NO DRILL
12
14 20
21mm, 7/8”
NO DRILL
12
14 20
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
85262
03-05
l 51072 Ø,RT,JL
03-05
l 51081 Ø,RT,JL
l 37069 Ø
n 37096 Ø,JL,RO
l 51072 Ø,RT,JL
n 88001 DB,RO
NO DRILL
5
7.5 15
l 33093 Ø,JL
21, 22mm, 3/4” NO DRILL
6
5
10.5 15
7.5 25
6.5 35
l
n
n
l
l
7.5 15
l 44564 Ø,JL
21mm,
3/4”,7/8”
9/16”, 3/4” 1/2”
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
44563
44619
37016
37034
37094
7/8”
6
8
15
Ø,JL
21, 22mm, 3/4” NO DRILL
Ø,CM
21, 22mm, 3/4” NO DRILL
6
6
7.5
7
7
10.5
7.5
12
12
12
15 n 41932 Ø,@, HM,JL, † 21mm, 7/8” NO DRILL
20
25
25
6
8
15
Ø
21mm, 3/4”
Ø
15/16", 3/4” 5/8”
NO DRILL
Ø
15/16", 3/4” 5/8”
7/8”
21, 22mm,
3/4”, 7/8”
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
15,17,18,
n 37096 Ø,JL
19,21, 22mm,
9/16”,3/4”
NO DRILL
5
10 20
NO DRILL
5
7.5 20
1/4”, 1/2”, 5
9/16”
6.5 40
JL, LT
n 37096 Ø,JL
l 44577 Ø, CS, FS,
JL, LT
n 44657 HM,SA
21, 22mm,
3/4”
21, 22mm,
3/4”, 7/8”
NO DRILL
6
BN,RD
–
85217
–
(with amber –
bulbs)
1/2”
6
–
BN,RD
–
BN,RD
12
15 25 78071
12
15 25
13
16 25
HM, LT, †
12 20 n 96939 Ø, @, CS, FS,
HM, LT
n 96944 Ø, @, CS, FS,
HM, LT
13/16”, 7/8”
13/16”, 7/8”
13/16”, 7/8”
RD
78071
5
10 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
12
15 25 78071
NO DRILL 5
3/4”
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
21, 22mm,
3/4”, 7/8”
NO DRILL
JL, LT
6.5 40
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
n 45293 Ø, #, CS, FS, 18, 21mm
18
18 25
13
16 25
21, 22mm,
3/4”, 7/8”
NO DRILL
5
10 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
12
15 25 78071
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25
3/4”
JL, LT
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
n 45022 Ø, #, CS, FS, LT, TF 18, 21mm NO DRILL
HM, LT
06996
–
7/16", 1/2" 35
13/16”, 7/8”
–
RD
–
85262
JL, LT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78071
16 25
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
n 51050 SA
n 88001 DB
–
13
13/16”, 7/8”
NO DRILL
LT, TF
HM, LT
13/16”, 7/8”
03-06
BN,RD
85262
l 51073 Ø, RT, CS, FS, 21, 22mm,
–
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
n 51050 SA
n 88001 DB
78071
–
HM, LT
8 ft. Bed, 2 & 4 WD
RD
85262
n 51050 SA
–
14 20
14 20
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
6.6 ft. Bed, 2 & 4 WD
n 88001 DB
12
12
BN,RD
BN,RD
–
RD
–
BN,RD
–
13 17 25
18 18 25
13 16 25
85262
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 DB,RO
NO DRILL
JL,RO, †
7.5 15 n 96932 Ø,@,HM,
JL,RO
–
OEM REPLACE.
l 44563 Ø,JL,RO
78071
FOOTNOTES
10.5 15
STANDARD WIRE
6
15
T-CONNECTOR
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
WT. DISTRIB.
INSTALL TIME
l 51081 Ø,RT,JL,RO
WT. CARRYING
8
DRILL BITS
6
WRENCHES
7/8”
FOOTNOTES
l 33093 Ø,JL
HITCH
NUMBER
STYLE
7.5 15
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
WRENCHES
DRILL BITS
NO DRILL
FOOTNOTES
WRENCHES
21mm,
3/4”,7/8”
HITCH
NUMBER
l 51072 Ø,RT,JL,RO
l 37069 Ø,RO
WIRING
FOOTNOTES
03-05
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
105
CHEVROLET
CHEVROLET
104
REESE TOWPOWER
REESE TOWPOWER
6
10.5 15
l 44563 Ø,JL
NO DRILL
6
12
14 20
5
7.5 25
n 44619 Ø,CM
NO DRILL
6
7.5 15
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
6.5 35
n 37016 Ø
21, 22mm,
3/4”
21, 22mm,
3/4”
21mm, 3/4”
NO DRILL
7.5 12 20
7.5 15
l 37034 Ø,RO
l 37094 Ø,RO
l 44564 Ø,JL
n 37096 Ø,JL,RO
l 51072 Ø,JL
APPLICATIONS GUIDE
–
6
8
NO DRILL
12
14 20 78071
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
6
12
14 20
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
7
7
12 25
12 25
7.5 15
l 44564 Ø,JL
6
8
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL,RO
9/16”, 3/4” 1/2”
15/16", 3/4” 5/8”
7/8”
15 n 41932 Ø,@,
HM,JL, †
21mm, 7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø,RO
7.5 15
l 44564 Ø,JL
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
85217
(with amber
bulbs)
85262
RD
15
15 n 41932 Ø,@,
78071
–
BN,RD
–
–
BN,RD
–
–
(with amber –
bulbs)
7/8”
6
8
NO DRILL
12
14 20 78071
15/16", 3/4” 5/8”
7
7
12 25 n 96932 Ø,@, HM,JL 21mm, 7/8” NO DRILL
12 25
12
14 20
6
8
15/16", 3/4” 5/8”
7/8”
HM,JL, †
21mm, 7/8”
85217
15
85262
–
BN,RD
–
–
BN,RD
–
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
15 n 41932 Ø,@,HM,
21mm, 7/8”
NO DRILL
12
14 20 78071
l 51081 Ø,RT,JL,RO
21, 22mm, 3/4” NO DRILL
6
10.5 15
l 44563 Ø,JL,RO
21, 22mm, 3/4” NO DRILL
6
10.5 15 n 96932 Ø,@,HM,
21mm, 7/8”
NO DRILL
12
14 20
n 37096 Ø,JL,RO
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
9/16”, 3/4” 1/2”
5
6.5 35
l 37034 Ø,RO
15/16", 3/4” 5/8”
7
12 25
7.5 25
7.5 15
l 37094 Ø,RO
l 44564 Ø,JL,RO
15/16", 3/4” 5/8”
7
6
12 25
8 15
21mm,
3/4”,7/8”
NO DRILL
5
7/8”
JL,RO, †
JL,RO
85262
–
BN,RD
–
–
BN,RD
–
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
NO DRILL
12
14 20 78071
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
6
12
14 20
5
7.5 25
6.5 35
l 37034 Ø,RO
l 37094 Ø,RO
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
7
7
12 25
12 25
7.5 15
l 44564 Ø,JL
6
8
7/16", 1/2" 35
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
15/16", 3/4” 5/8”
7/8”
15 n 41932 Ø,@,
HM,JL, †
21mm, 7/8”
15
85262
78071
RD
78071
l 51072 Ø,RT,JL
2006
06996
RD
78071
l 51072 Ø,RT,JL,RO
l 51072 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
BN,RD
7/8”
l 37069 Ø
n 37096 Ø,JL,RO
n 88001 DB,RO
–
l 33093 Ø,JL
7/16", 1/2" 35
Pickup, Silverado 1500 LD 2006
8 ft. Bed, 2 & 4 WD
–
RD
–
BN,RD
–
JT 2WD models only.
APPLICATIONS GUIDE
15, 18, 21mm, 9/16",
11/16", 3/4", T50
BN,RD
7.5 15
l 37069 Ø,RO
l 51072 Ø,RT,JL
n 88001 DB,RO
–
5
7/16", 1/2" 35
6.6 ft. Bed, 2 & 4 WD
78071
NO DRILL
l 51072 Ø,RT,JL
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/8”
–
12 25
12 25
8 15
7/16", 1/2" 35
Pickup, Silverado 1500 HD 2006
5.8 ft. Bed, 2 & 4 WD
n 88001 DB,RO
5
BN,RD
21mm,
3/4”,7/8”
l 51072 Ø,RT,JL
15, 18, 21mm, 9/16",
11/16", 3/4", T50
NO DRILL
7
7
6
–
l 51072 Ø,RT,JL
l 37069 Ø
n 37096 Ø,JL,RO
n 88001 DB
21mm,
3/4”,7/8”
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
OEM REPLACE.
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
FOOTNOTES
l 51081 Ø,RT,JL
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
14 20 78071
T-CONNECTOR
WT. CARRYING
12
DRILL BITS
WRENCHES
8
FOOTNOTES
6
HITCH
NUMBER
7/8”
DRILL BITS
l 33093 Ø,JL
WRENCHES
STYLE
7.5 15
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
HITCH
NUMBER
DRILL BITS
NO DRILL
FOOTNOTES
21mm,
3/4”,7/8”
HITCH
NUMBER
l 51072 Ø,RT,JL
l 37069 Ø
6.6 ft. Bed, 2 & 4 WD
WIRING
WRENCHES
5.8 ft. Bed, 2 & 4 WD
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
107
CHEVROLET
CHEVROLET
106
REESE TOWPOWER
REESE TOWPOWER
10.5 15
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø,RO
7
7
12 25
12 25 n 41932 Ø,@,
7.5 15
l 44564 Ø,JL
6
8
HITCH
NUMBER
l 51072 Ø,RT,JL
n 88001 DB,RO
1/4”, 1/2”, 5
9/16”
NO DRILL
5
12
14 20
RD
85262
–
(with amber –
bulbs)
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
6
10.5 15
5
5
7.5 25
7.5 15
l 37034 Ø
l 37094 Ø,RO
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
7
7
12 25
12 25 n 41932 Ø,@,
NO DRILL
12
14 20 85217
6
8
NO DRILL
12
14 20
NO DRILL
15/16", 3/4” 5/8”
7/8”
21mm, 7/8”
HM,JL, †
15 n 96932 Ø,@, HM,JL 21mm, 7/8”
85262
74682
–
RD
85262
74682
–
RD
85262
–
(with
amber
bulbs)
–
l 51072 Ø,RT,JL,RO
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
l 51081 Ø,RT,JL,RO
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL,RO
6
10.5 15
5
7.5 25
l 37034 Ø,RO
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
7
12 25
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
6.5 35
l 37094 Ø,RO
15/16", 3/4” 5/8”
7
12 25 n 41932 Ø,@,HM,
21mm, 7/8”
NO DRILL
12
14 20 85217
7.5 15
l 44564 Ø,JL,RO
7/8”
6
8
15 n 96932 Ø,@,HM,
21mm, 7/8”
NO DRILL
12
14 20
15
JL,RO, †
JL,RO
RD
85262
74682
–
RD
85262
–
RD
85262
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
NO DRILL
12
14 20 74682
l 51081 Ø,RT,JL
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
6
10.5 15
l 44563 Ø,JL
6
12
14 20
5
7.5 25
6.5 35
l 37034 Ø,RO
l 37094 Ø,RO
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
7
7
12 25
12 25
7.5 15
l 44564 Ø,JL
6
8
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21mm,
NO DRILL 5
3/4”,7/8”
15/16", 3/4” 5/8”
7/8”
15 n 41932 Ø,@,
HM,JL, †
21mm, 7/8”
RD
15
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
85262
74682
–
RD
85262
–
RD
85262
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
12
15 25 74682
n 51050 SA
NO DRILL
5
10 20
n 44657 HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
1/4”, 1/2”, 5
9/16”
6.5 40
JL, LT
n 37096 Ø,JL
3/4”
21, 22mm,
3/4”, 7/8”
15,17,18,
19,21, 22mm,
9/16”,3/4”
JL, LT
HM, LT, †
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
13
16 25
HM, LT
7/16", 1/2" 35
13/16”, 7/8”
13/16”, 7/8”
RD
85262
RD
JT 2WD models only.
APPLICATIONS GUIDE
–
8
l 51072 Ø,RT,JL
06996
74682
6
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
15, 18, 21mm,
9/16", 11/16",
3/4", T50
85262
7/8”
l 37069 Ø
n 37096 Ø,JL,RO
n 88001 DB
BN,RD
l 33093 Ø,JL
21mm,
3/4”,7/8”
RD
–
7.5 15
15
85262
74682
5
l 51072 Ø,RT,JL
8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
6.6 ft. Bed, 2 & 4 WD (Classic)
(with amber –
bulbs)
14 20 85217
NO DRILL
n 37096 Ø,JL,RO
n 88001 DB,RO
–
12
21mm, 7/8”
21mm,
3/4”,7/8”
l 37069 Ø,RO
6.6 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
8 ft. Bed, 2 & 4 WD (Classic)
BN,RD
NO DRILL
HM,JL, †
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
–
l 51072 Ø,RT,JL
l 44564 Ø,JL
n 88001 DB,RO
7/8”
74682
85262
l 37069 Ø
l 51072 Ø,RT,JL
n 88001 DB,RO
15/16", 3/4” 5/8”
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
APPLICATIONS GUIDE
15,17,18,
19,21,
22mm,
9/16”,3/4”
21mm,
3/4”,7/8”
OEM REPLACE.
6
5
21, 22mm, NO DRILL
3/4”
15/16", 3/4” 5/8”
FOOTNOTES
l 44563 Ø,JL
STANDARD WIRE
10.5 15
15
T-CONNECTOR
6
WT. DISTRIB.
INSTALL TIME
21, 22mm, NO DRILL
3/4”
9/16”, 3/4” 1/2”
WT. CARRYING
l 51081 Ø,RT,JL
DRILL BITS
8
WRENCHES
6
FOOTNOTES
7/8”
HITCH
NUMBER
l 33093 Ø,JL
DRILL BITS
7.5 15
WRENCHES
STYLE
5
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
NO DRILL
HITCH
NUMBER
DRILL BITS
21mm,
3/4”,7/8”
FOOTNOTES
l 51072 Ø,RT,JL
l 37069 Ø
n 37096 Ø,JL,RO
WIRING
WRENCHES
2007
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
109
CHEVROLET
CHEVROLET
108
REESE TOWPOWER
REESE TOWPOWER
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
6.5 40
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
n 45293 Ø, #, CS, FS, 18, 21mm
18
18 25
13
16 25
NO DRILL
LT, TF
HM, LT
13/16”, 7/8”
n 88001 DB
Series 8 ft. Bed, 2 & 4 WD (Classic)
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/16", 1/2" 35
85262
n 51050 SA
2007
21, 22mm,
3/4”, 7/8”
NO DRILL
5
10 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
11 20 n 41939 Ø, @, CS,
13/16”, 7/8”
12
15 25 74682
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
n 88001 DB
15, 18, 21mm, 9/16",
11/16", 3/4", T50
3/4”
FS, LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
JL, LT
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
NO DRILL
5
l 44577 Ø, CS, FS,
JL, LT
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
NO DRILL
5
21, 22mm,
3/4”
NO DRILL
6
7.5 20
8 ft. Bed, 2 & 4 WD (New Body Style)
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
21, 22mm,
3/4”
NO DRILL
6
12
15 25 74682
12
15 25 85262
13
17 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 74682
12
15 25 85262
n 45022
13/16”, 7/8”
18, 21mm
NO DRILL
13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 74682
12
15 25 85262
13
17 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 74682
HM, LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
11 20 n 41939 Ø, @, CS, FS,
HM, LT, †
7.5 20
n 96944
6.6 ft. Bed, 2 & 4 WD (New Body Style)
n 41939
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
NO DRILL
NO DRILL
5
5
7.5 20
7.5 20
l 44577 Ø, CS, FS,
JL, LT
l 44577 Ø, CS, FS,
JL, LT
21, 22mm,
3/4”
21, 22mm,
3/4”
NO DRILL
NO DRILL
6
6
HM, LT
Ø, #, CS, FS,
LT, TF
Ø, #, CS, FS,
LT, TF
Ø, @, CS, FS,
HM, LT
Ø, @, CS, FS,
LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
11 20 n 41939 Ø, @, CS, FS,
LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
l 51072 Ø,RT,JL
l 51081 Ø,RT,JL
l 51072 Ø,RT,JL
l 51072 Ø,RT,JL
l 51081 Ø,RT,JL
l 51072 Ø,RT,JL
06996
13
n 45293
15 25
RD
–
85262
l 44577 Ø, CS, FS,
12
7/16", 1/2" 35
13/16”, 7/8”
18, 21mm
NO DRILL
NO DRILL
5
7.5 15
l 33093 Ø,JL
21, 22mm, 3/4” NO DRILL
NO DRILL
6
5
10.5 15
7.5 15
l 44563 Ø,JL
l 44564 Ø,JL
NO DRILL
5
7.5 15
l 33093 Ø,JL
21, 22mm, 3/4” NO DRILL
6
5
10.5 15
7.5 15
l 44563 Ø,JL
l 44564 Ø,JL
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
21mm,
3/4”,7/8”
NO DRILL
NO DRILL
6
8
21, 22mm, 3/4” NO DRILL
NO DRILL
6
6
10.5 15
8 15
NO DRILL
6
8
21, 22mm, 3/4” NO DRILL
6
6
10.5 15
8 15
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
21mm, 3/4”,
7/8”
7/8”
15
15
13/16”, 7/8”
13/16”, 7/8”
18, 21mm
NO DRILL
13/16”, 7/8”
18, 21mm
NO DRILL
13/16”, 7/8”
18, 21mm
NO DRILL
12
15 25 85262
13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
85262
RD
85262
RD
–
BN,RD
85262
BN
–
BN,RD
85262
BN
–
BN,RD
85262
BN
–
BN,RD
85262
BN
74682
–
BN,RD
85262
74682
–
BN,RD
85262
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
JL, LT
JL, LT
RD
OEM REPLACE.
7.5 20
–
FOOTNOTES
NO DRILL 5
3/4”
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
15 25 74682
13/16”, 7/8”
T-CONNECTOR
WT. CARRYING
12
HM, LT, †
DRILL BITS
WRENCHES
6
FOOTNOTES
WRENCHES
NO DRILL
HITCH
NUMBER
FOOTNOTES
21, 22mm,
3/4”
JL, LT
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
STYLE
l 44577 Ø, CS, FS,
NO DRILL
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
10 20
21, 22mm,
3/4”, 7/8”
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
n 37096 Ø,JL
WIRING
5
DRILL BITS
FOOTNOTES
HITCH
NUMBER
n 51050 SA
WRENCHES
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
111
CHEVROLET
CHEVROLET
110
REESE TOWPOWER
REESE TOWPOWER
6
11 15
HITCH
NUMBER
6
10.5 15
6
8
8
n 44563 Ø, CS, FS, GP, 13, 21, 22mm, NO DRILL
JL, LT
3/4”, 7/8”
8
–
BN,RD
85262
15
16 20 74682
–
BN,RD
85262
15
16 20 85262
–
BN
–
18
18 60
15
16 20 74682
–
BN,RD
85262
15
16 20 85262
–
BN
–
18
18 30
15
16 20 74682
–
BN,RD
85262
15
16 20 85262
–
BN
–
18
18 60
15
16 20 74682
–
BN,RD
85262
15
16 20 85262
–
BN
–
n 45300
18 20
–
–
–
–
15
GP, JL, LT, †
GP, JL, LT
n 45300 #, CS, FS,
HM, JL,
KH, LT
12 20 n 41942 Ø, @, CS, FS,
GP, JL, LT, †
3/4”, 7/8”
3/4”, 7/8”
13, 19, 21, 3/8”, 9/16”
22mm, 3/4”, hole saw
7/8”
3/4”, 7/8”
APPLICATIONS GUIDE
l 51197 Ø, CS, FS, HM, 21, 22mm,
JL, LT
3/4”, 7/8”
NO DRILL
6
11 15
JL, LT
3/4”, 7/8”
8
GP, JL, LT
3/4”, 7/8”
n 45300 Ø, #, CS, FS, 13, 19, 21, 3/8”, 9/16”
HM, JL, LT 22mm, 3/4”, hole saw
7/8”
GP, JL, LT
3/4”, 7/8”, †
JL, LT
3/4”, 7/8”
8
GP, JL, LT
n 45300 #, CS, FS,
HM, JL,
KH, LT
12 20 n 41942 Ø, @, CS, FS,
GP, JL, LT, †
GP, JL, LT
Pickup, Silverado, Cab & Chassis 01-07
3500 Series w/34 Wide Frames (Classic)
Ø, #, CS, FS, HM, JL, LT
n 41936 @, †
n
n
n
n
96936
41938
96938
41940
n 77005 –
10, 17, 18mm, 11/16” 1” hole saw
30
n
n
n
n
n
88002
88002
88002
88002
06958
–
3/4”
1/2”
–
3/4”
1/2”
–
3/4”
1/2”
–
3/4”
1/2”
Ø,GU,HM,RH 18mm, 3/4”, 7/8” –
30
30
30
30
35 n 37152 CN,GU,SB
n 37042 CN,GU,SB
n 88001 CN,GU,SB
06996
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 40
n 33014 Ø
n 33014 Ø
n 33014 Ø
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
30
1/4”, 1/2”, 5
9/16”
6
30
n 33053 Ø,GU
18mm
NO DRILL
18mm
NO DRILL
18mm
NO DRILL
7/8”
12
17/32”
30
15 40 –
15 40 –
16 35
–
–
–
–
–
9/16”
12
12
12
15
9/16”
15
16 35 –
–
–
–
11/16”
15
16 35 –
17/32”
12
17/32”
12
12
12
15
30
15 40
15 40 –
16 35
15
16 35 –
15
16 35 –
@,CC
13/16”, 7/8” 9/16”
@
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
3/4”
@
3/4”
@,CC, †
13/16”, 7/8” 9/16”
@,CC
13/16”, 7/8” 9/16”
@, †
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
n 96947 @
98-02
1983
84-91
84-91
92-94
83-84
17/32”
13/16”, 7/8” 9/16”
n 96940 @
Prizm
S-10 Blazer Downsize, All Models
S-10 Blazer Downsize, 2 Dr.
S-10 Blazer Downsize, 4 Dr.
S-10 Blazer Downsize, All Models
S-10 Pickup w/Standard Box &
Step Bumper
18
3/4”
n 41936 @, †
96936
41938
96938
41940
3/8”, 9/16”
hole saw
@
n 96947 @
n
n
n
n
3/4”, 7/8”
13, 19, 21,
22mm, 3/4”,
7/8”
3/4”
@,CC, †
n 96940 @
Pickup, Silverado, Cab & Chassis 07-13
3500 HD w/34 Wide Frames (New Body Style)
3/4”, 7/8”
13, 19, 21, 3/8”, 9/16”
22mm, 3/4”, hole saw
7/8”
3/4”, 7/8”
30 74682
30 74682
–
–
BN,RD
85262
–
–
–
–
–
–
–
3.5 6
3.5 6
3.5 6
60
60
60
–
–
74427
–
78013
78058
78058
78058
–
–
–
–
–
3.5 6
45
–
–
–
–
–
–
BN
74051
JT 2WD models only.
APPLICATIONS GUIDE
74682
OEM REPLACE.
NO DRILL
21, 22mm, NO DRILL
3/4”
l 44564 Ø,JL
7/8”
JL, LT
3/4”, 7/8”
FOOTNOTES
7.5 15
15
STANDARD WIRE
5
8
T-CONNECTOR
NO DRILL
6
WT. DISTRIB.
INSTALL TIME
l 44563 Ø,JL
7/8”
WT. CARRYING
10.5 15
DRILL BITS
6
WRENCHES
NO DRILL
FOOTNOTES
21, 22mm,
3/4”
21mm,
l 51072 Ø,RT,JL
3/4”,7/8”
l 51197 Ø, CS, FS, HM, 21, 22mm,
JL, LT
3/4”, 7/8”
l 51081 Ø,RT,JL
HITCH
NUMBER
l 33093 Ø,JL
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
STYLE
7.5 15
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
l 51072 Ø,RT,JL
FOOTNOTES
DRILL BITS
NO DRILL
FOOTNOTES
21mm,
3/4”,7/8”
HITCH
NUMBER
WRENCHES
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
WRENCHES
CLASS II
CLASS I
113
CHEVROLET
CHEVROLET
112
REESE TOWPOWER
REESE TOWPOWER
n 06958 Ø,GU,HM,RH 18mm, 3/4”, 7/8” –
35 n 37152 CN,GU,SB
n 37042 CN,GU,SB
30
1/4”, 1/2”, 5
9/16”
6
30
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
3.5 6
40
–
–
–
–
n 33053 Ø,GU
7/8”
3.5 6
45
74178
78058
–
–
74178
n 33055 Ø,†
3/4”, 7/8”
3.5 6
40
74178
78058
–
–
96-97
n 33055 Ø
3/4”, 7/8”
3.5 6
40
74178
78058
–
–
–
–
–
–
n 51063 CN,GP,GU
98-04
3/4”
1/2”
3.5 5 20
98-04
n 33055 Ø
3/4”, 7/8”
3.5 6
40
–
–
–
–
98-04
n 44062 Ø
3/4”
NO DRILL
3.5 6
40
–
–
–
–
n 44062 CN,GU
3/4”
NO DRILL
3.5 5
20
74216
78058
–
–
–
–
–
–
74180
78058
BN
–
74682, 78058
85262
RD
85262
n 06958 Ø,GU,RH
98-04
2012
2012
2013
2013
92-99
n
n
n
n
77251
77265
77281
77282
Ø,GP
13mm, 3/4”
11/16”
Ø,HM,JR
11/16”
–
GP,JR
11/16”, 7/8”
1/2”
GP,JR
11/16”, 7/8”
1/2”
18mm, 3/4”, 7/8” –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
35 n 37152 AF, CN, GU, ST 15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
n 37042 AF, CN, GU, ST 15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
6
30
6
30
7/16", 1/2" 40
74216
20
20
25
25
n 37152 –
n 51012 HM
n 51012 HM
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/4”, 1/2”, 5
9/16”
6
30
n 37074 HM
7/8”
1/2”, 9/16” 6
10 30
1/4”, 1/2”, 5
9/16”
6
30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
1/2”, 9/16” 5
7 30
7 30
n 44096 HM
7/8”
1/2”, 9/16” 5
7
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/8”
7/8”
1/2”, 9/16” 5
30
7/16", 1/2" 30
74180
n 37152 –
00-02
n 37042 –
n 51201 Ø,CN,HM
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
1/4”, 1/2”, 5
9/16”
6
30
1/4”, 1/2”, 5
9/16”
6
30
NO DRILL
5
10 15
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15 n 41930 @,CN, †
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20 n 96930 @,CN
n 45013 #,TF
n 88001 –
Suburban New Body Style w/Amber
Turn Signals
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
6
3/4”, 7/8”
7/16", 1/2" 40
n 37042 –
Suburban New Body Style w/Amber
Turn Signals
1/4”, 1/2”, 5
9/16”
n 33055 Ø
94-97
n 88001 CN,GU,ST
Sonic, 4 Dr. Sedan, All Models
Sonic, 5 Dr. Hatchback, All Models
Spark, Models w/o Ground Effects
Spark, Models w/Ground Effects
Suburban Old Body Style
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
WIRING
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 37042 –
n 51201 Ø,CN,HM
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
–
BN
–
10
12 35 85262
–
BN
–
12
14 50
RD
85262
1/4”, 1/2”, 5
9/16”
6
30
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
1/4”, 1/2”, 5
9/16”
6
30
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15 n 41930 @,CN, †
22mm, 13/16”, 1/2”
7/8”, 3/4”
10
12 35 85262
–
BN
–
10 15
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20 n 96930 @,CN
22mm, 13/16”, 1/2”
7/8”, 3/4”
21mm, 3/4” 1/2”
10
12 35 85262
–
BN
–
12
14 50
NO DRILL
5
74682, 78058
85262
n 45013 #,TF
06996
12 35 85262
85262
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
10
7/16", 1/2" 30
03-06
n 88001 –
22mm, 13/16”, 1/2”
7/8”, 3/4”
22mm, 13/16”, 1/2”
7/8”, 3/4”
21mm, 3/4” 1/2”
7/16", 1/2" 30
85262
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 CN,GU,SB
S-10 Pickup w/Rear Fascia & No
Step Bumper
S-10 Pickup w/Sportside Box &
Non-Towing Bumper
S-10 Pickup All, Except Sportside
Box w/Non-Towing Bumper & Standard Box w/
Rear Fascia
Step Bumper
S-10 Pickup w/Sportside Box &
Non-Towing Bumper
S-10 Pickup w/Standard Box & Step
Bumper, Inc. ZR2, Highlander Pkg. & Crew Cab
WRENCHES
FOOTNOTES
HITCH
NUMBER
85-93
85-97
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Step Bumper
S-10 Pickup w/Standard Box & Step
Bumper, Inc. ZR2 & Highlander Pkg.
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
115
CHEVROLET
CHEVROLET
114
REESE TOWPOWER
REESE TOWPOWER
n 88001 –
n 51201 Ø,CN,HM
n 37042 –
n 51201 Ø,CN,HM
14mm, 18, 19mm 1/2”
19mm
NO DRILL
TrailBlazer
1/2”, 9/16” 5
7 30
7 30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
7/8”
1/2”, 9/16” 5
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
1/4”, 1/2”, 5
9/16”
6
30
1/4”, 1/2”, 5
9/16”
6
30
NO DRILL
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
n 06302 AL,GP,JR
n 51102 AL,GP,JR
Van, G-Series Full Size
5
6
30
1/4”, 1/2”, 5
9/16”
6
30
NO DRILL
14mm,
18mm
NO DRILL
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
18mm, 7/8”
NO DRILL 15 n 51031 Ø, FP, HM, KK 18mm,
NO DRILL
1-1/8”
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
5
10 15
1-1/8”
3.5
15
97-05
n 77040 AL,GP,JR
06996
10, 15mm,
3/4”, 7/8”
1/2”
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
85219
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
74682
78058
RD, BO
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20
85262
78058
RD, 4-Flat 85262
models only
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
74682
78058
RD, BO
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20
85262
78058
RD, 4-Flat 85262
models only
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15
n 33038 Ø,HM
40
1/2”
40 n 51079 AL,GP,JR
1/2”
40
1/2”
40 n 51079 AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
1/2”
30 n 06302 AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
n 51003 BF
40 n 51079 AL,GP,JR
n 51102 AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
40
3/4”, 9/16” NO DRILL
3/4”, 9/16” NO DRILL
10, 15mm,
3/4”, 7/8”
1/2”
3.5
15
l 33015 Ø,SD
18mm, 7/8”
NO DRILL
4
6
15
5
5
4
6 30
6 25
6 15
n 33021 Ø,FP,KK
4
6
20
n 44098
4
6
5
5 25
l 44569 Ø,GP,JR
18mm, 3/4”
5
5
Ø, FP, HM, KK
3.5 5 40
3.5 5 40
85219
–
74896
78013
78013
5
7.5 30
5 7.5 30
3.5 5 40
35365
44011
35365
44011
35365
74682
78058
–
–
25
78066 78113
74682, 78058
85262
85344 78058
BN
85262
BN
–
85344
78058
BN
–
–
78058
–
–
74486
78058
–
–
–
78058
–
–
74207
78013
HG
–
40
1/2”
3.5 5
40
1/2”
3.5 5
40
NO DRILL
5
5
5
5
5
30
45
30
45
30
Ø,BF,CV
3/4”, 9/16”
NO DRILL
3/4”, 9/16”
NO DRILL
Ø,BF,CV
3/4”, 9/16”
NO DRILL
n 44574 AL,JR
20
3.5 5
Ø,BF,CV
n 44011 Ø,BF,CV
n 33094 AL,JR
85219
1/2”
NO DRILL
10
7.5
10
7.5
10
HG
BN,RD
40
3/4”, 9/16”
–
–
85217
3.5 5
Ø,BF,CV
n 44574 AL,JR
–
BN
85262
1/2”
Ø,BF,CV
n 44574 AL,JR
n
n
n
n
n
NO DRILL
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
3/4”, 9/16”
n 33094 AL,JR
10, 15mm,
3/4”, 7/8”
14mm, 18mm NO DRILL
6 15
n 33094 AL,JR
1/2”
n 51003 BF
Venture All, Inc. AWD
–
30
4
87-95
1996
BN
74896
78-86
Van, G-Series Classic & Sport Full
Size w/Lo-Mount Taillights
78058
10 15
1/4”, 1/2”, 5
9/16”
l 51083 Ø,GP,JR,RT
2009
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
7
09-12
Uplander All, Inc. AWD (Canada Only)
DRILL BITS
1/2”, 9/16” 5
Traverse
n 51102 AL,GP,JR
WRENCHES
7/8”
02-10
n 06302 AL,GP,JR
FOOTNOTES
n 44096 HM
TrailBlazer (w/ Tow Package)
05-08
STYLE
30
l 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
n 51031 Ø, FP, HM, KK 18mm,
Uplander All, Inc. AWD
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
6
74180
85262
n 51152 Ø,HM
n 06955 Ø,FP,GP,KK
99-01
1/4”, 1/2”, 5
9/16”
15, 18, 21mm, 9/16", 7/16", 1/2" 30
11/16", 3/4", T50
20
15
n 88001 –
10 30
85262
n 37152 –
n 77015 Ø,HM
n 77023 Ø,HM
1/2”, 9/16” 6
15, 18, 21mm, 9/16", 7/16", 1/2" 30
11/16", 3/4", T50
Tahoe New Body Style w/Amber Turn Signals 03-06
1998
99-04
7/8”
3/4”, 9/16”
NO DRILL
10, 15mm,
3/4”, 7/8”
1/2”
5 7.5 45
3.5 5 40
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
BN, BO
40
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 37042 –
Tracker 2 & 4 Dr.
Tracker
n 37074 HM
74180
n 37152 –
n 88001 –
30
15, 18, 21mm, 9/16", 7/16", 1/2" 30
11/16", 3/4", T50
Tahoe New Body Style w/Amber Turn Signals 00-02
n 88001 –
6
STANDARD WIRE
n 51012 HM
n 51012 HM
1/4”, 1/2”, 5
9/16”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/8”
WIRING
T-CONNECTOR
n 37042 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 37152 –
95-00
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Tahoe Old Body Style
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
117
CHEVROLET
CHEVROLET
116
REESE TOWPOWER
REESE TOWPOWER
200, 4 Dr. Sedan
200 Convertible
300 All, Except 300C
n 77254 Ø,GP,JR
3/4”, 7/8”
NO DRILL
15
n 77254 Ø,GP,JR
3/4”, 7/8”
NO DRILL
15
n 06079 Ø,†,HM,JR
05-07
n 06079 Ø,†,HM,JR
08-10
APPLICATIONS GUIDE
11-13
n 06129 Ø,AE,HM,SV
300C, All Styles
05-10
n 06079 Ø,†,HM,JR
n 51176 Ø,†,HM,JR
n 06129 Ø,HM,JR
300C, All Styles
11-12
n 06129 Ø,AE,HM,SV
300M
300M All, Except Special
Aspen
99-01
02-04
07-08
n 06284 HM,JR
n 06284 HM,JR
10, 13, 15,
19mm, 3/4”
10, 13, 19mm,
3/4”
19mm, 3/4”
10, 13, 15,
19mm, 3/4”
10, 13, 15,
19mm, 3/4”
10, 13, 19mm,
3/4”
19mm, 3/4”
Concorde
93-97
n 06354 JR,TA
Concorde
98-01
n 06275 HM
Concorde
Concorde
Imperial
2002
03-04
90-93
n 06281 JR
n 06281 JR
n 06097 –
Intrepid Canada Only
93-97
n 06354 JR,TA
Intrepid Canada Only
Le Baron 2 Dr. Coupe, Inc. Convertible
98-04
87-95
n 06355 JR
n 06097 AO
Le Baron 4 Dr.
90-94
n 88002 –
n 06097 –
LHS
94-97
n 06354 JR,TA
LHS
LHS
New Yorker All, Inc. Turbo
1999
00-01
86-88
n 06281 JR
n 06281 JR
n 06097 –
New Yorker FWD Sedan, Inc. Landau
88-90
n 06097 –
New Yorker Fifth Ave. FWD 90-93
n 06097 –
New Yorker Salon
90-93
n 06097 –
New Yorker
94-96
n 06354 JR,TA
Pacifica
04-08
Pacifica, with Factory 7-way
04-08
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WT. DISTRIB.
INSTALL TIME
–
–
78042
78104
CH
–
78104
BN,CH
–
BN,CH
NO DRILL
30
30
NO DRILL
30
NO DRILL
NO DRILL
30
30
NO DRILL
40
85767
78104
CH
–
NO DRILL
30
78042
78104
CH
–
NO DRILL
NO DRILL
30
30
10, 13, 15,
19mm, 3/4”
10, 13, 15,
19mm, 3/4”
13mm, 11/16”
NO DRILL
40
85767
78104
CH
–
1/2”
1/2”
30
30
74224
74224
78027
78013
78013
78104
–
13mm, 11/16”
–
–
–
85253
78104
85262
78013
–
85262
85219
–
13, 16, 17mm,
3/4”, 9/16”,
11/16”
13, 15mm, 9/16”,
11/16”, 7/8”
7/8”
7/8”
1/2”
5
33082
44173
33082
44173
AI
11/16”, 3/4” 1/2”
–
7/8”
1/2”
6
5
6
5
9
7.5
9
7.5
50
30
50
30
BN,CH
40
40
–
78013
–
–
35
74224
78013
BN,HG
–
30
30
40
74224
–
–
78013
78013
78104
BN,HG
–
–
–
–
–
40
–
78013
BN,HG
–
30
40
74224
–
78013
78058
BN,HG
–
–
–
35
40
–
78104
–
–
40
–
78013
–
–
74224
–
–
78013
78013
78104
BN,HG
–
–
–
–
–
13mm, 11/16”
1/8”, 3/8”,
1/2”
3/8”,
1/2”, 1”
1/2”
13mm, 11/16”
1/2”
13mm, 9/16”,
11/16”
13, 15mm, 9/16”,
11/16”, 7/8”
13mm, 3/4”
3/8”
1/8”, 3/8”,
1/2”
1/2”
1/2”
7.5 30
n
n
n
n
1/2”
7/8”
5
7.5 30
78027
85253
–
AI
11/16”, 3/4” 1/2”
–
7/8”
1/2”
BN,CH
BO
13mm, 9/16”,
11/16”
3/4”
3/8”
13mm, 9/16”,
11/16”
13, 15mm, 9/16”,
11/16”, 7/8”
13mm, 11/16”
3/8”
1/8”, 3/8”,
1/2”
1/2”
13mm, 11/16”
1/2”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13, 15mm, 9/16”,
11/16”, 7/8”
3/8”
30
30
40
3/8”
40
–
78104
–
–
3/8”
40
–
78104
–
–
3/8”
40
–
78104
–
–
1/8”, 3/8”,
1/2”
40
–
78013
–
–
78003
78104
–
–
78003
–
BN,CH
85253
1/2”
l 51084 Ø,RT,JR
06996
–
NO DRILL
l 51067 –
n 06977 JR
78058
BN,CH
BN,CH
30
2009
95-00
78104
NO DRILL
l 51067 –
Cirrus
85773
85773
85773
85773
78040
18,19mm,
3/4”
NO DRILL
3.5 5 45
l 44566 Ø,JR
18,19mm,
3/4”
NO DRILL
3.5 5
45
JT 2WD models only.
APPLICATIONS GUIDE
10, 13, 19mm,
3/4”
19mm, 3/4”
WIRING
11-12
n 51176 Ø,†,HM,JR
n 06129 Ø,HM,JR
Aspen
CLASS V
11-13
n 51176 Ø,†,HM,JR
n 06129 Ø,HM,JR
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CHRYSLER
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
119
CHRYSLER
CHRYSLER
118
REESE TOWPOWER
CLASS II
CLASS I
95-00
n 77088 JR,KH
Sebring 2 Dr. Except Convertible
01-02
n 77088 JR,KH
Sebring 4 Dr. Only
01-06
Sebring All, Except Convertible
07-10
Sebring
Sebring
Sebring
Sebring
Convertible
Convertible
Convertible
Convertible
All Models
All Models
All Models
All Models
Town & Country
Mini Van, 2 WD Long Wheelbase
1996
97-00
01-06
07-10
77171
77254
77184
77184
77092
77171
77254
NO DRILL
NO DRILL
Ø,HM,JR
16mm, 11/16”
NO DRILL
Ø,HM,JR
16mm, 11/16”
NO DRILL
GP
7/8”
1/2”
Ø,GP,JR
3/4”, 7/8”
NO DRILL
Ø,GP,JR
3/4”, 7/8”
NO DRILL
15 n 06526 GP,JR
15
30
30
15
15
15
–
1/2”
30
–
74721
–
–
–
74721
74721
–
–
n 37042 –
Town & Country All, Inc. 4 WD
96-00
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
Town & Country All, Inc. 4 WD
01-03
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
–
30 n 51062 HM
Town & Country Except Stow &
Go Seats, Inc. 4 WD
04-07
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
–
30 n 51062 HM
06996
3.5 3.5 30
–
OEM REPLACE.
FOOTNOTES
BN,CH
78058
–
BN,CH
BN,CH
BN,CH
–
–
–
–
BN,CH
–
–
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33046 †
3/4”
1/2”
3.5 3.5 30
74187
78058
BN
–
–
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33045 –
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
74658
78013
HG
–
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33045 Ø
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
85245
78013
HG
–
85245
30 n 51062 HM
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
40
1/2”
7/16", 1/2" 45
n 37152 –
n 88001 –
6
3/4”
78058
78013
78013
78104
74658
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
1/4”, 1/2”, 5
9/16”
n 33046 †,JT
7/16", 1/2" 45
n 37152 –
n 88001 –
40
BN,CH
74187
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
6
7/16", 1/2" 30
n 37152 –
n 88001 –
1/4”, 1/2”, 5
9/16”
BN,CH
BN,CH
74051
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/16", 1/2" 30
91-95
n 88001 –
WT. DISTRIB.
INSTALL TIME
–
n 37042 JT
Town & Country
Mini Van, 2 WD Long Wheelbase
WT. CARRYING
40
n 37152 JT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
DRILL BITS
DRILL BITS
1/2”
1990
n 88001 JT
WRENCHES
–
3/4”, 7/8”
3/4”, 7/8”
FOOTNOTES
BN,CH
Ø,GP,JR
Ø,GP,JR
HITCH
NUMBER
–
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
BN,CH
13, 16, 17mm,
3/4”, 9/16”,
11/16”
3/4”, 7/8”
DRILL BITS
–
WRENCHES
BN,CH
FOOTNOTES
–
HITCH
NUMBER
–
STYLE
30
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1/2”
DRILL BITS
–
WRENCHES
BN,CH
FOOTNOTES
–
HITCH
NUMBER
–
INSTALL TIME
STYLE
30
12, 13, 14mm,
11/16”
12, 13, 14mm,
11/16”
WRENCHES
1/2”
15, 17mm, 3/4”
FOOTNOTES
BN,CH
–
–
–
HITCH
NUMBER
78013
78013
78013
1/2”
1/2”
IONSTALL TIME
STYLE
78021
78021
78021
DRILL BITS
1/2”
30
30
30
15, 17mm, 3/4”
15, 17mm, 3/4”
n 06977 JR
n
n
n
n
n
n
n
WIRING
STANDARD WIRE
n 77135 JR
n 77135 JR
n 77135 JR
CLASS V
T-CONNECTOR
01-04
05-10
05-09
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
PT Cruiser All, Inc. GT & Turbo Models
PT Cruiser All, Inc. GT & Turbo Models
PT Cruiser Convertible
All, Inc. GT & Turbo Models
Sebring All, Except Convertible
CLASS III/IV
CLASS III
7/16", 1/2" 45
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33045 Ø
15, 17, 18,
19mm, 7/8”
7/16”
3.5 5
n 44006 HM
19mm, 3/4”
1/2”
3.5 3.5 30
30
78000
HG
78058
–
–
74051
JT 2WD models only.
121
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
CHRYSLER
CHRYSLER
120
REESE TOWPOWER
REESE TOWPOWER
CLASS II
–
n 44586 Ø,GP,JR
4
5
20
85777
78104
BN,CH
–
n 33045 Ø
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
85777
85245
78013
HG
1/2”
3.5 3.5 30
DRILL BITS
13, 15, 18mm
–
13, 15, 18mm
–
20
20
18, 19mm
–
n 51203 Ø,GP,JR
30 n 51062 HM
n 51203 Ø,GP,JR
Voyager All, Inc. 4 WD
n 06550 Ø,GP,JR
n 51192 Ø,GP,JR
01-03
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
n 37042 –
n 88001 –
DODGE
Avenger
95-00
n 77088 JR,KH
Avenger
08-10
n
n
n
n
n
Avenger
Caliber All, Except R/T
Caliber All, Except R/T & SRT-4
Caravan
Caravan Short Wheelbase, 2 WD Only
11-13
2007
08-12
84-90
84-90
77171
77254
77254
77145
77145
1/2”
30
Ø,GP,JR
12, 13, 14mm,
11/16”
3/4”, 7/8”
NO DRILL
Ø,GP,JR
3/4”, 7/8”
NO DRILL
15 n 06526 GP,JR
15
15
15
15
n 06080 GW,GP
Ø,GP,JR
3/4”, 7/8”
NO DRILL
Ø,GP
15/16”
NO DRILL
Ø,GP
15/16”
NO DRILL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3/4”, 7/8”
11/16”, 7/8”
Caravan Short Wheelbase, 2 & 4 WD
Caravan Short Wheelbase, 2 WD Only
n 06080 GW,GP
91-95
91-95
1/2”
15/32”
96-00
96-00
n 77012 GP,QS
n 77012 Ø,HM
18, 19mm
NO DRILL
18, 19mm
NO DRILL
15
30 n 06369 Ø,GP
15/32”
1/4”, 1/2”, 5
9/16”
6
40
n 44006 HM
7/16", 1/2" 30
18, 19mm
–
BN,CH
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33046 †,JT
3/4”
1/2”
3.5 3.5 30
–
HG
–
78058
74722
74722
85773
74705
85775
–
–
78104
–
–
BN,CH
–
BN,CH
78104
78104
78104
78058
78058
–
78058
78058
BN
78013
78013
HG
BN,CH
BN,CH
CH
–
–
–
–
–
–
74051
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 44618 –
n 33046 †,JT
7/8”, 11/16” 1/2”
3/4”
1/2”
3.5 5 30
3.5 3.5 30
74187
74187
BN
–
–
74187
30 n 51062 HM
n 37042 –
06996
40
30
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
7/16", 1/2" 30
n 37152 –
n 88001 –
1/4”, 1/2”, 5
9/16”
30
n 37042 JT
Caravan All, Except Sport
Caravan All, Inc. 2 & 4 WD
4 4 20
3.5 3.5 30
30
n 37152 JT
n 88001 JT
20
85245
n 37042 JT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
4
7/16", 1/2" 45
n 37152 JT
n 88001 JT
19mm, 3/4” 1/2”
4
7/16", 1/2" 45
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33045 –
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
74658
74658
74658
HG
–
–
HG
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 37152 –
OEM REPLACE.
STANDARD WIRE
CH
FOOTNOTES
T-CONNECTOR
78104
WT. DISTRIB.
INSTALL TIME
85775
WT. CARRYING
20
DRILL BITS
5
WRENCHES
4
FOOTNOTES
–
HITCH
NUMBER
n 44586 Ø,GP,JR
13, 15, 18mm
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
25
20
20
n 51175 Ø,HM
n 06550 Ø,GP,JR
n 51192 Ø,GP,JR
DRILL BITS
–
–
08-10
WRENCHES
15mm, 18mm
13, 15, 18mm
Town & Country
FOOTNOTES
–
HITCH
NUMBER
–
STYLE
78058
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
78000
15mm, 18mm
DRILL BITS
25
n 06992 Ø,HM
WRENCHES
3.5 4
FOOTNOTES
15mm, 18mm NO DRILL
INSTALL TIME
STYLE
n 44176 Ø
05-07
11-13
WIRING
25
Town & Country w/Stow & Go
Seats, Inc. 4 WD
Town & Country
CLASS V
–
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS I
123
CHRYSLER - DODGE
CHRYSLER - DODGE
122
REESE TOWPOWER
REESE TOWPOWER
–
n 37152 –
n 37042 –
n 88001 –
Caravan Except Stow & Go Seats, Inc.
2 & 4 WD
04-07
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
15, 18, 21mm, 9/16", 7/16", 1/2" 45
11/16", 3/4", T50
18, 19mm
–
30 n 51062 HM
n 37152 –
n 88001 –
Caravan Cargo Van
Long Wheelbase, 2 WD Only
Caravan Cargo Van
Short Wheelbase, 2 & 4 WD
Caravan Cargo Van
Short Wheelbase, 2 WD Only
91-93
n 06080 JT
15, 18, 21mm, 9/16", 7/16", 1/2" 45
11/16", 3/4", T50
11/16”, 7/8”
15/32”
30
91-95
n 06080 GW,GP
11/16”, 7/8”
15/32”
n 37042 JT
Caravan Cargo Van
Long Wheelbase, 2 WD Only, Except LE
Challenger All Models
Challenger All Models
Charger All Models
Charger, All Models
Dakota Pickup Inc. Extended Cab
94-95
n 06080 JT
08-10
n
n
n
n
n
n
n
n
n
11-12
06-10
11-12
87-94
06079
51176
06129
06128
06079
51176
06129
06128
06250
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 33045 Ø
15, 17, 18,
19mm, 7/8”
7/16”
3.5 5
n 44006 HM
19mm, 3/4”
1/2”
3.5 3.5 30
30
78000
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
DRILL BITS
85245
–
HG
78058
–
–
74187
78058
BN
–
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
40
1/4”, 1/2”, 5
9/16”
6
40
n 44618 –
7/8”, 11/16” 1/2”
3.5 5
30
74187
78058
BN
–
n 33046 †,JT
3/4”
3.5 3.5 30
74187
78058
BN
–
1/2”
BN
–
30
30
40
35
30
30
30
35
40 n 51025 GU
78040
78058
–
–
78040
78040
78058
78058
–
–
–
–
85765
74182
78104
78058
BN
–
–
78058
BN,HJ
–
NO DRILL
Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL
Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL
Ø,†,HM,JR
10, 13, 19mm, 3/4” NO DRILL
Ø,†,HM,JR
19mm, 3/4”
Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL
NO DRILL
Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL
GU
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
n 37042 GU
n 51025 GU
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
3.5 5 30
1/4”, 1/2”, 5
9/16”
6
35
1/4”, 1/2”, 5
9/16”
6
35
1/2”
n 36047 GU
3/4”, 9/16”
n 44102 GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
1/2”
5
7
30
3.5 5
30
1/2”
CH
3.5 5 30
7/16", 1/2" 40
74182
40 n 51025 GU
n 37152 GU
n 37042 GU
n 51025 GU
06996
40
3.5 3.5 30
HG
78058
NO DRILL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
1/2”
78013
74187
19mm, 3/4”
n 88001 CT,GU
1/4”, 1/2”, 5
9/16”
n 44006 HM
85245
30
19mm, 3/4”
n 06250 GU
40
30
15/32”
n 37152 GU
Dakota Pickup All, Inc. RT & Dakota 95-96
Sport w/Step Bumper
6
3.5 5
74187
Ø,†,HM,JR
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/4”, 1/2”, 5
9/16”
7/16”
7/16", 1/2" 30
Ø,†,HM,JR
n 88001 GU
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
74051
n 37152 JT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
n 33045 Ø
1/2”
30
91-95
n 88001 JT
3.5 3.5 30
19mm, 3/4”
7/16", 1/2" 40
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
3.5 5 30
1/4”, 1/2”, 5
9/16”
6
35
1/4”, 1/2”, 5
9/16”
6
35
1/2”
n 36047 GU
3/4”, 9/16”
n 44102 GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
1/2”
5
7
30
3.5 5
30
74475
3.5 5 30
74475
HJ
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 37042 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
30 n 51062 HM
STANDARD WIRE
18, 19mm
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
30 n 06369 Ø,GP
WIRING
T-CONNECTOR
NO DRILL
STYLE
18, 19mm
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77012 Ø,HM
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
01-03
STYLE
YEAR
MODEL
Caravan All, Inc. 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
125
DODGE
DODGE
124
REESE TOWPOWER
REESE TOWPOWER
n 37152 CT,GU
n 37042 CT,GU
n 51025 Ø,GU
n 88001 CT,GU
n 06250 Ø,GU
1/2”
40 n 51025 Ø,GU
n 51025 Ø,GU
Dakota Pickup All Models
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
40 n 37152 CT,GU
n 37042 CT,GU
n 51025 Ø,GU
n 88001 CT,GU
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
40 n 37152 CT,GU
n 37042 CT,GU
n 51025 Ø,GU
n 88001 CT,GU
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 51138 Ø,HM
10-11
n 51138 Ø,HM
Dart, All Models w/Dual Exhaust
Dart, All Models w/Dual Exhaust
Durango
2013
2013
98-99
3/4”
NO DRILL
NO DRILL
35
n 36025 GU
1/2”
30
8
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
3.5 5 30
n 36047 Ø,GU
3/4”, 9/16”
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”
1/2”
6
35
n 44102 Ø,GU
1/4”, 1/2”, 5
9/16”
6
35
n 36025 GU
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
6
35
1/4”, 1/2”, 5
9/16”
6
35
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
1/2”
5
7
30
3.5 5
30
5
30
8
74475
22mm,
1-1/8”
22mm,
1-1/8”
OEM REPLACE.
HJ
78058
BN,HJ
–
n 36047 Ø,GU
n 36025 GU
n 44102 Ø,GU
HJ
3/4”, 9/16”
1/2”
5
7
30
74475
78058
BN,HJ
85253
3/4”
1/2”
5 8
3.5 5
30
30
74475
78058
BN,HJ
85253
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
3.5 5 30
1/4”, 1/2”, 5
9/16”
6
35
1/4”, 1/2”, 5
9/16”
6
35
1/2”
–
3.5 5 30
1/4”, 1/2”, 5
9/16”
1/2”
BN,HJ
3.5 5 30
1/4”, 1/2”, 5
9/16”
1/2”
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
STANDARD WIRE
5
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
DRILL BITS
6
30
78058
n 36047 Ø,GU
n 36025 GU
n 44102 Ø,GU
HJ
3/4”, 9/16”
1/2”
5
7
30
–
–
BN
85253
3/4”
1/2”
5 8
3.5 5
30
30
74187
78058
BN,HJ
85253
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3.5 5 30
HJ
NO DRILL
5
8 20
n 33092 Ø,HM
5
8
20
74187
78058
BN,HJ
85253
NO DRILL
5
8 20
n 33092 Ø,HM
5
8
20
74187
78058
BN,HJ
85253
NO DRILL
3.5 5 15
n 33056 Ø
n 44064 Ø
3/4”
NO DRILL
78013
–
–
NO DRILL
5 7.5 30
3.5 5 20
74658
3/4”, 7/8”
20
15
n 06960 Ø
06996
1/4”, 1/2”, 5
9/16”
3.5 5
74475
74187
05-09
3/4”
n 44102 Ø,GU
30
7/16", 1/2" 40
n 77278 Ø,HM
n 77278 Ø,HM
35
7
74475
n 51025 Ø,GU
n 06250 Ø,GU
6
5
7/16", 1/2" 40
2004
Dakota Pickup All, Except Quad Cab 2004
18mm, 1/2”, 1/2”
5/8”, 11/16”,
3/4”, 7/8”
3/4”
1/2”
1/4”, 1/2”, 5
9/16”
1/2”
74475
n 51025 Ø,GU
n 06250 Ø,GU
3/4”, 9/16”
7/16", 1/2" 40
02-03
Dakota Pickup All, Except Quad Cab 02-03
n 36047 Ø,GU
74475
n 37042 CT,GU
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3.5 5 30
7/16", 1/2" 40
n 37152 CT,GU
n 88001 CT,GU
1/2”
3/4”, 7/8”
–
15 n 51035 Ø
3/4”, 7/8”
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Sport w/Step Bumper
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
WIRING
T-CONNECTOR
40 n 51025 Ø,GU
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
1/2”
STYLE
18mm, 1/2”,
5/8”, 11/16”,
3/4”, 7/8”
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 06250 Ø,GU
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Sport w/Step Bumper
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
127
DODGE
DODGE
126
REESE TOWPOWER
REESE TOWPOWER
n 51067 –
l 51148 Ø,RT
7/8”
1/2”
18, 21mm,
3/4”, 7/8”
NO DRILL
3.5 5 15
5
6
7.5 30
9 20
n 33056 Ø
n 44064 Ø
n 33082 AI
l 44173 –
l 44175 Ø
Durango
2009
Durango
Dynasty
11-13
88-93
n 06097 –
Grand Caravan Long Wheelbase,
2 WD Only
84-90
n 88002 –
n 06080 GW,GP,JT
n 51067 –
7/8”
1/2”
5
7.5 30
n 51067 –
7/8”
1/2”
5
7.5 30
13mm, 9/16”,
11/16”
3/4”
3/8”
40
1/2”
11/16”, 7/8”
15/32”
35
30 n 37152 JT
n 37042 JT
n 88001 JT
Grand Caravan Long Wheelbase,
2 WD Only
n 06080 JT
91-93
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
Grand Caravan Long Wheelbase, 2 94-95
WD Only, Except LE
n 06080 JT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
Grand Caravan All, Inc. 4 WD
96-00
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
15/32”
30 n 37152 JT
Grand Caravan All, Inc. 4 WD
01-03
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
15/32”
30 n 37152 JT
06996
7/8”
11/16”, 3/4” 1/2”
7/8”
1/2”
21mm
NO DRILL
3/4”
1/2”
–
BN,RD
BN,CH
85253
–
OEM REPLACE.
78058
78104
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
85253
78027
6
9
6
5
9 50
7.5 30
78027
78104
BN,CH
–
6
5
6
9 50
7.5 30
7.5 20
78027
78104
BN,CH
–
85775
–
78104
78058
CH
–
–
–
–
78058
–
–
78058
BN
–
78058
BN
–
78013
HG
–
20
3.5 3.5 30
30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
n 33046 †,JT
3/4”
1/2”
3.5 3.5 30
74187
30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
n 33046 †,JT
3/4”
1/2”
3.5 3.5 30
74187
30
30 n 51062 HM
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
n 33045 –
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
74658
30
7/16", 1/2" 45
–
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
1/2”
–
74187
74658
30 n 51062 HM
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 21mm NO DRILL
deep socket,
3/4”, 7/8”
11/16”, 3/4” 1/2”
BN,HG
9 50
7.5 30
7/16", 1/2" 30
n 37152 –
n 88001 –
6
1/2”
78013
74187
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
1/4”, 1/2”, 5
9/16”
n 33046 †,JT
7/8”
74658
6
5
7/16", 1/2" 30
n 37152 –
n 88001 –
6
11/16”, 3/4” 1/2”
5 7.5 30
3.5 5 20
74051
n 37042 JT
n 88001 JT
1/4”, 1/2”, 5
9/16”
n 33082 AI
n 44173 –
l 44662 Ø,CS,HM
NO DRILL
NO DRILL
7/16", 1/2" 30
n 37042 JT
n 88001 JT
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
n 33082 AI
n 44173 –
3/4”
3/4”, 7/8”
7/16", 1/2" 45
3.5 3.5 30
19mm, 3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
n 33045 Ø
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
85245
HG
78013
HG
–
30
85245
HG
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Durango
07-08
WRENCHES
FOOTNOTES
STYLE
NO DRILL
STANDARD WIRE
Durango w/ OEM 7-Way (4-Flat Upgrade) 00-08
04-06
Durango
3/4”, 7/8”
WIRING
T-CONNECTOR
15 n 51035 Ø
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
–
DRILL BITS
3/4”, 7/8”
CLASS V
WRENCHES
n 06960 Ø
00-03
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Durango
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
129
DODGE
DODGE
128
REESE TOWPOWER
REESE TOWPOWER
–
n 37152 –
n 37042 –
Grand Caravan w/Stow & Go
Seats, Inc. 4 WD
05-07
Grand Caravan
08-10
Grand Caravan, All Styles
n 06992 Ø,HM
n
n
n
n
n
11-13
51175
06550
51192
06550
51192
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15mm, 18mm
–
25
25
20
20
20
20
Ø,HM
15mm, 18mm
–
13, 15, 18mm
–
Ø,GP,JR
13, 15, 18mm
–
Ø,GP,JR
13, 15, 18mm
–
Ø,GP,JR
13, 15, 18mm
–
n 06354 JR,TA
Intrepid
Journey
Journey
Journey
Magnum All Models
98-04
2009
2010
11-12
05-08
n 06355 JR
Mini-Ram
Neon 2 & 4 Dr.
Neon 2 & 4 Dr.
Neon All, Inc. R/T
Nitro
Nitro
Pickup, D/W Series, Full Size
84-88
95-99
00-01
02-05
2007
08-10
67-70
13, 15mm, 9/16”, 1/8”, 3/8”,
11/16”, 7/8”
1/2”
13mm, 3/4”
1/2”
n 77121 –
n 77052 GP,JR
n 77052 GP,JR
11/16”, 7/8”
7/16”
7/8”
1/2”
7/8”
1/2”
06079
51176
06129
06080
6
Ø,HM,JR, †
10, 13, 19mm, 3/4” NO DRILL
Ø,HM,JR
19mm, 3/4”
NO DRILL
Ø,HM,JR
10, 13, 19mm, 3/4” NO DRILL
GW,GP
11/16”, 7/8”
15/32”
n 51017 GP
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
–
4
4
25
78000
78058
–
–
n 44586 Ø,GP,JR
4
5
20
85775
78104
CH
–
n 44586 Ø,GP,JR
4
5
20
85777
–
BN,CH
–
85777
N/A
78013
–
–
74224
78086
85717
–
78039
–
–
–
–
78104
BN,HG
–
–
–
–
–
–
–
–
–
78017
78017
78058
78058
78058
78058
78104
78104
CH
–
–
–
–
–
–
–
–
–
–
–
–
–
10
12 40 –
–
–
–
10
12 40
12
14 45
20
3/4”
NO DRILL
3/4”
NO DRILL
3/4”
NO DRILL
4
4
4
4
4
4
25
25
25
n 44601 Ø,HM,JR
n 44601 Ø,HM,JR
n 44601 Ø,HM,JR
3/4”
NO DRILL
3/4”
NO DRILL
3/4”
NO DRILL
3/4”
1/2”
4
4
4
4
4
4
25
25
25
3.5 3.5 30
5
5
13, 18, 19mm, 3/16”, 9/32”, 5
6 20
6 20
10 40
n 44559 Ø,GP
n 44559 Ø,GP
n 36025 –
NO DRILL
NO DRILL
3/4”
1/2”
6
6
8
20
20
30 n 41902 @,DB,GP, † 3/4”, 13/16”, 9/16”
NO DRILL
NO DRILL
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
9/16”, 3/4”
1/2”, 17/32”
3/16”, 9/32”, 5
1/2”, 17/32”
10 40
5
7.5 25
n 36025 FP,GU
3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”, 9/32”, 5
1/2”, 17/32”
3/16”, 9/32”, 5
1/2”, 17/32”
10 40
l 37034 GU
15/16", 3/4” 5/8”
7
12 25 n 96902 @,DB,GB
10 40
l 37094 GU
15/16", 3/4” 5/8”
7
12 25 n 45005 #,HX,TF
1/2”
6
10 25
1/2”
6
10 25
1/2”
5
5
8 30
10 45
1/2”
18, 19mm
18, 19mm
5
5
5
18, 19mm
18, 19mm
71-85
7/8”
3/4”, 13/16”, 9/16”
7/8”
10
12 40
10
12 40
7.5 12 30 n 41902 @,DB,GB, † 3/4”, 13/16”, 9/16”
10
12 40 –
10
12 40
12
14 45
n 96902 @,DB,GB
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
1/2”
n 37081 CQ
7/8”
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 25
n 36025 FP,GU
3/4”
n 51016 HM
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”, 7/8”
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
l 37034 GU
15/16", 3/4” 5/8”
7
12 25 n 96902 @,DB,GB
5
10 40
l 37094 GU
15/16", 3/4” 5/8”
7
12 25 n 45005 #,HX,TF
1/2”
6
10 25
1/2”
6
10 25
1/2”
5
8
n 51017 GP
n 44108 FP,GU,
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
n 88001 GU
–
3.5 4
n 44108 FP,GU,
73-85
78058
15mm, 18mm NO DRILL
n 33046 †,JT
l 37069 GU
71-72
78000
n 44176 Ø
30
20
20
n 51089 Ø,GP
n 51089 Ø,GP
n 51016 HM
06996
30
40
30
30
30
30
n 51016 HM
w/Deep Drop Bumper
FOOTNOTES
3.5 3.5 30
HITCH
NUMBER
1/2”
1/4”, 1/2”, 5
9/16”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
19mm, 3/4”
6
DRILL BITS
n 44006 HM
1/4”, 1/2”, 5
9/16”
WRENCHES
3.5 5
FOOTNOTES
DRILL BITS
7/16”
30
n 51017 GP
15, 17, 18,
19mm, 7/8”
40
l 97208 Ø,HM,JR
l 97208 Ø,HM,JR
l 97208 Ø,HM,JR
n
n
n
n
n 33045 Ø
74051
n 51203 Ø,GP,JR
93-97
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
3.5 3.5 30
7/16", 1/2" 45
Ø,GP,JR
Intrepid
19mm, 3/4” 1/2”
15, 18, 21mm, 9/16", 7/16", 1/2" 30
11/16", 3/4", T50
1/2”
7/8”
3/4”, 13/16”, 9/16”
7/8”
3/4”, 15/16” 1/2”, 3/8”,
5/8”
7.5 12 30 n 41902 @,DB,GB, † 3/4”, 13/16”, 9/16”
7/8”
3/4”, 13/16”, 9/16”
7/8”
3/4”, 15/16” 1/2”, 3/8”,
5/8”
BN,CH
CH
–
–
BN,CH
–
–
–
–
BN,CH
30
74051
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
30 n 51062 HM
STANDARD WIRE
18, 19mm
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
30 n 06369 Ø,GP
T-CONNECTOR
NO DRILL
WIRING
STYLE
18, 19mm
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77012 Ø,HM
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
04-07
STYLE
YEAR
MODEL
Grand Caravan Except Stow & Go
Seats, Inc. 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
131
DODGE
DODGE
130
REESE TOWPOWER
REESE TOWPOWER
w/Deep Drop Bumper
Pickup, Ram, Full Size
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/2”
6
10 25
1/2”
5
8
5
10 45
–
BN,HJ
–
–
BN,HJ
–
15/16", 3/4” 5/8”
7
12 40 n 41923 @,GP,SA, † 3/4”, 13/16”, 9/16”
12
14 35 74182
n 37096 JL
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
7/8”
1/4”, 1/2”, 5
9/16”
6.5 45
l 37094 GU
15/16", 3/4” 5/8”
7
12 40 n 96923 @,GP,SA
7/8”
3/4”, 13/16”, 9/16”
7/8”
12
14 35
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
10 40
n 44103 GU
7/8”
1/2”
5
10 20 n 45005 #,HX,TF
3/4”, 15/16” 1/2”, 3/8”,
5/8”
12
14 45
10 40
n 44108 Ø,FP,GU,
HM,HX
18mm, 3/4”
deep socket
1/2”
6
10 25
10 15
n 44109 Ø,FP,GP,
18mm, 3/4”
deep socket
1/2”
6
10 25
74182
n 51017 GP,FP
9/16”, 3/4”
1/2”
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7/8”
1/2”
5
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
5
10 45
74182
–
BN,HJ
–
15/16", 3/4” 5/8”
74475
–
BN,HJ
–
–
BN,HJ
–
7.5 40
6.5 45
l 37034 GU
l 37094 GU
15/16", 3/4” 5/8”
7
7
12 40
12 40
10 15
n 44103 GU
7/8”
1/2”
5
10 20 n 41923 @,GP,SA, † 3/4”, 13/16”, 9/16”
12
14 35 74182
10 40
n 44108 Ø,FP,GU,
HM,HX
18mm, 3/4”
deep socket
1/2”
6
10 25 n 96923 @,GP,SA
7/8”
3/4”, 13/16”, 9/16”
7/8”
12
14 35
10 40
n 44109 Ø,FP,GP,
18mm, 3/4”
deep socket
1/2”
6
10 25 n 45005 #,HX,TF
3/4”, 15/16” 1/2”, 3/8”,
5/8”
12
14 45
GU,HX
HJ
7/8”
7/16", 1/2" 30
74475
n 37081 CQ
95-98
99-01
HJ
74182
l 37034 GU
l 37069 GU
n 37096 JL
l 37069 GU
n 37096 JL
9/16”, 3/4” 1/2”
n 51039 –
7/8”
n 51016 HM,FP
n 51017 GP,FP
5
10 45
74475
–
BN,HJ
–
3/4”
7.5 12 30
7 12 40
74475
–
BN,HJ
–
n 37017 †,GU
l 37034 GU
15/16", 3/4” 5/8”
5
10 15
l 37094 GU
n 44103 GU
7/8”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
10 40
10 40
1/2”
1/2”
15/16", 3/4” 5/8”
1/2”
7
5
12 40
10 20 n 41923 @,GP,SA, † 3/4”, 13/16”, NO DRILL
7/16", 1/2" 30
12
14 35 74182
–
BN,HJ
–
n 96923 @,GP,SA
7/8”
3/4”, 13/16”, NO DRILL
7/8”
12
14 35 74182
–
BN,HJ
–
n 45010 #,TF
3/4”
12 14 30
1/2”
74475
n 37081 CQ
99-01
HJ
7/8”
7.5 40
6.5 45
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
–
30
7/8”
GU,HX
BN,HJ
OEM REPLACE.
10 25
7/16", 1/2" 30
95-98
06996
6
7.5 40
n 51016 HM,FP
Pickup, Ram, Full Size w/Deep
Drop Bumper
1/2”
n 37081 CQ
n 37081 CQ
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14 45
5
1994
n 88001 GU
12
1/2”
n 51039 –
Drop Bumper
3/4”, 15/16” 1/2”, 3/8”,
5/8”
9/16”, 3/4”
n 51039 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
12 25 n 45005 #,HX,TF
l 37069 GU
n 51017 GP,FP
n 88001 GU
7
FOOTNOTES
15/16", 3/4” 5/8”
STANDARD WIRE
l 37094 GU
–
74182
n 51016 HM,FP
Drop Bumper
12 40
7/16", 1/2" 30
1994
15, 18, 21mm,
9/16", 11/16",
3/4", T50
10
T-CONNECTOR
10 40
86-93
n 88001 GU
12 25 n 96902 @,DB,GB
7.5 12 30 n 41902 @,DB,GB, † 3/4”, 13/16”, 9/16”
7/8”
5
10 40
74475
HJ
–
BN,HJ
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 GU
WT. DISTRIB.
INSTALL TIME
7
DRILL BITS
15/16", 3/4” 5/8”
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
12 40 74182
WRENCHES
l 37034 GU
n 44108 FP,GU,
WT. CARRYING
n 51017 GP
10
FOOTNOTES
10 40
13, 18,
19mm, 3/4”,
13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
7/8”
3/4”, 13/16”, 9/16”
7/8”
1/2”
HITCH
NUMBER
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
n 51016 HM
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
3/4”
DRILL BITS
n 36025 FP,GU
9/16”, 3/4” 1/2”
WRENCHES
7.5 25
l 37069 GU
FOOTNOTES
STYLE
5
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
86-93
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
133
DODGE
DODGE
132
REESE TOWPOWER
REESE TOWPOWER
2002
n 51039 –
7/8”
n 51016 HM,FP
l 37069 GU
n 37096 JL
n 51039 –
n 88001 GU
Pickup, Ram, Full Size 3500 Only, w/ 2002
Deep Drop Bumper
02-03
Pickup, Ram, Full Size 1500 Only
Built Before 11/2002
2003
Pickup, Ram, Full Size 1500 Built
After 11/2002
15, 18, 21mm,
9/16", 11/16",
3/4", T50
l 37094 GU
n 44103 GU
7/8”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
10 40
10 40
9/16”, 3/4”
1/2”
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
7/8”
3/16”, 9/32”, 5
1/2”, 17/32”
3/16”, 9/32”, 5
1/2”, 17/32”
n 51143 Ø,CP,GU
n 51143 Ø,CP,GU
n 51143 Ø,CP,GU
06-08
1/2”
15/16", 3/4” 5/8”
1/2”
7
5
1/2”
5
7.5 40
6.5 45
–
BN,HJ
–
BN,HJ
12
14 35 74182
n 96923 @,GP,SA
12
14 35
n 45010 #,TF
3/4”
12 14 30
3/4”, 15/16” NO DRILL
3/4”, 15/16” NO DRILL
3/4”, 15/16” NO DRILL
3/4”, 15/16” NO DRILL
5
10 45
74475
–
BN,HJ
–
3/4”
74475
–
BN,HJ
–
–
BN,HJ
–
15/16", 3/4” 5/8”
7.5 12 30
7 12 40
l 37094 GU
15/16", 3/4” 5/8”
7
1/2”
12 40
n 41923 @,GP,SA, † 3/4”, 13/16”, NO DRILL
12
14 35 74182
10 40
n 96923 @,GP,SA
7/8”
3/4”, 13/16”, NO DRILL
7/8”
12
14 35
3/4”
12
14 30
5
5
5
5
8 20
8 20
8 20
8 20
8 20
OEM REPLACE.
HJ
5
n 37017 †,GU
l 37034 GU
n 44103 GU
–
7/8”
10 40
10 15
FOOTNOTES
74475
7/8”
3/4”, 13/16”, NO DRILL
7/8”
1/2”
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
12 40
10 20 n 41923 @,GP,SA, † 3/4”, 13/16”, NO DRILL
7/8”
1/2”
5
10 20 n 45010 #,TF
1/2”
HJ
7/8”
5
10 45
74475
78058
BN,HJ
85253
n 37084 Ø,CP,DS,GU 7/8”, 15/16” NO DRILL
5
10 20
–
78058
–
–
5
8
20 n 41929 @, DY, GP,
KL, SG, †
3/4”, 13/16”, 1/2”
15/16”
12
15 35 –
78058
–
–
l 44536 Ø,CP,DY
3/4”, 7/8”
NO DRILL
6
10 25 n 96929 @, DY, GP,
n 44603 Ø,CP,DS
3/4”, 1-1/8” NO DRILL
n 33072 Ø,CP,GU
78058
–
85253
78058
–
85253
78058
–
85253
78058
–
85253
1/2”
12
15 35
6
KL, SG
10 20 n 45288 #,DY,KL,SB
1/2”
12
14 35
3/4”, 15/16” NO DRILL
5
8
1/2”
12
15 35 –
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL
6
10
1/2”
12
15 35
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
6
10
1/2”
12
14 35
9/16”
18
18 95
1/2”
12
15 35 –
1/2”
12
15 35
1/2”
12
14 35
9/16”
18
18 95
1/2”
12
15 35 –
3/4”, 13/16”, 1/2”
15/16”
3/4”, 13/16”, 1/2”
15/16”
12
15 35
12
14 35
n 33072 Ø,CP,GU
3/4”, 15/16” NO DRILL
5
8
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL
6
10
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
6
10
3/4”, 13/16”,
15/16”
3/4”, 13/16”,
15/16”
20 n 41929 @, GP, KL, 3/4”, 13/16”,
SG, †
15/16”
3/4”, 13/16”,
25 n 96929 @, GP,
KL, SG
15/16”
20 n 45288 #,KL,SB 3/4”, 13/16”,
15/16”
n 45299 #, AA, CS, FS, 16, 18, 21mm,
GH, HM, LT, 3/8”
20 n 41929 @, GP, KL, 3/4”, 13/16”,
SG, †
15/16”
3/4”, 13/16”,
25 n 96929 @, GP,
KL, SG
15/16”
20 n 45288 #,KL,SB 3/4”, 13/16”,
15/16”
n 45299 #, AA, CS, FS, 16, 18, 21mm,
GH, HM, LT, 3/8”
20 n 41929 @, GP, KL, 3/4”, 13/16”,
SG, †
15/16”
n 33072 Ø,CP,GU
3/4”, 15/16” NO DRILL
5
8
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL
6
10 25 n 96929 @, GP,
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
6
KL, SG
10 20 n 45288 #,KL,SB
n 33072 Ø,CP,GU
3/4”, 15/16” NO DRILL
5
8
l 44536 Ø,CP
n 44603 Ø,CP
3/4”, 7/8”
3/4”, 1-1/8” NO DRILL
6
6
10 25
10 20
NO DRILL
20
–
n 45288 #,KL,SB
06996
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
7.5 12 30
7 12 40
74475
n 51143 Ø,CP,GU
04-05
Pickup, Ram, Full Size 1500, Except
Daytona, Hemi Sport Quad Cab, Ram Rumble Bee & SRT-10
3/4”
7/16", 1/2" 30
03-05
DRILL BITS
10 15
n 37081 CQ
03-05
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
1/2”
n 37081 CQ
n 51017 GP,FP
Pickup, Ram, Full Size 1500, Except
Mega Cab & SRT-10
15/16", 3/4” 5/8”
74475
n 51016 HM,FP
Pickup, Ram, Full Size 3500 HD
n 37017 †,GU
l 37034 GU
7/16", 1/2" 30
Pickup, Ram, Full Size 2500 Only, w/ 2002
Deep Drop Bumper
2002
7.5 40
6.5 45
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
WIRING
3/4”, 13/16”, 1/2”
15/16”
12
14 35
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
DRILL BITS
9/16”, 3/4” 1/2”
n 51017 GP,FP
n 88001 GU
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 37069 GU
n 37096 JL
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
135
DODGE
DODGE
134
REESE TOWPOWER
REESE TOWPOWER
Chassis Cab
3/4”, 15/16” NO DRILL
n 51143 Ø,CP,GU
3/4”, 15/16” NO DRILL
6
10 20
8 20
12
15 35
n 45288 #,KL,SB
3/4”, 13/16”, 1/2”
15/16”
12
3/4”, 13/16”, 1/2”
15/16”
3/4”, 13/16”, 1/2”
15/16”
16, 18, 21mm, 9/16”
3/8”
3/4”, 13/16”, 1/2”
15/16”
n 33072 Ø,CP,GU
3/4”, 15/16” NO DRILL
5
8
20 n 41929 @, GP, KL,
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL
6
10 25 n 96929 @, GP,
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
6
SG, †
KL, SG
10 20 n 45299 #, AA, CS, FS,
GH, HM, LT,
n 45288 #,KL,SB
n 33072 Ø,CP,GU
3/4”, 15/16” NO DRILL
5
8
l 44536 Ø,CP
3/4”, 7/8”
NO DRILL
6
10 25 n 96929 @, GP,
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
6
07-12
20 n 41929 @, GP, KL,
SG, †
KL, SG
10 20 n 45299 #, AA, CS, FS,
GH, HM, LT,
n 41936 @
n 96936 @
n 41940 @, †
n 96940 @
n 96947 @
Chassis Cab
n 41936 @, †
08-12
n 96936 @
n 41940 @, †
n 96940 @
n 96947 @
Chassis Cab
n 41936 @, †
08-12
n 96936 @
n 41940 @, †
n 96940 @
n 96947 @
n 44603 Ø,CP
2009
6
78058
–
85253
14 35 –
78058
–
85253
12
15 35 –
–
–
85253
12
15 35
18
18 95
12
14 35 –
–
–
85253
3/4”, 13/16”, 1/2”
15/16”
12
15 35 –
78058
–
85253
3/4”, 13/16”, 1/2”
15/16”
16, 18, 21mm, 9/16”
3/8”
3/4”
17/32”
12
15 35
18
18 95
78058
–
85253
–
–
–
12
30 –
3/4”
17/32”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
3/4”
9/16”
12
15
30
16 35
9/16”
15
16 35 –
11/16”
15
16 35 –
17/32”
12
30 –
3/4”
17/32”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
3/4”
9/16”
12
15
30
16 35
9/16”
15
16 35 –
11/16”
15
16 35 –
17/32”
12
30 –
17/32”
12
15
30
16 35
15
16 35 –
15
16 35 –
3/4”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
10 20
–
78058
–
85253
–
–
–
–
–
–
85253
–
–
–
–
–
–
74682, 78058
85262
78071 N/A
–
BO
85253
85219
09-13
Pickup, Ram, Full Size 2500 HD,
Except Mega Cab
Inc. Mega Cab
10-12
n 45288 #,KL,SB
3/4”, 13/16”, 1/2”
15/16”
12
14 35 –
–
Fifth Wheel –
models only
–
10-12
n 41929 @, GP, KL,
3/4”, 13/16”, 1/2”
15/16”
12
15 35 –
–
–
–
n 96929 @, GP,
3/4”, 13/16”, 1/2”
15/16”
16, 18, 21mm, 9/16”
3/8”
3/4”, 13/16”, 1/2”
15/16”
12
15 35
18
18 95
10-12
KL, SG
n 45299 #, AA, CS, FS,
GH, HM, LT,
n 45288 #,KL,SB
12
14 35 –
–
–
–
10-12
n 41929 @, GP, KL,
3/4”, 13/16”, 1/2”
15/16”
12
15 35 –
–
–
–
3/4”, 13/16”, 1/2”
KL, SG
15/16”
n 45299 #, AA, CS, FS, 16, 18, 21mm, 9/16”
GH, HM, LT, 3/8”
12
15 35
18
18 95
Except Mega Cab
Inc. Mega Cab
n 44603 Ø,CP
3/4”, 1-1/8” NO DRILL
OEM REPLACE.
3/4”, 1-1/8” NO DRILL
5
3/4”, 13/16”, 1/2”
15/16”
FOOTNOTES
n 44603 Ø,CP
06-09
06-09
KL, SG
STANDARD WIRE
10 25 n 96929 @, GP,
T-CONNECTOR
6
DRILL BITS
NO DRILL
SG, †
WRENCHES
3/4”, 7/8”
8 20
15 35 –
FOOTNOTES
l 44536 Ø,CP
5
WT. DISTRIB.
INSTALL TIME
n 51143 Ø,CP,GU
12
20 n 41929 @, GP, KL,
06-09
06-09
3/4”, 13/16”, 1/2”
15/16”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
8
DRILL BITS
5
WRENCHES
3/4”, 15/16” NO DRILL
FOOTNOTES
STYLE
n 33072 Ø,CP,GU
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
5
8 20
WIRING
3/4”, 1-1/8”
6
10 20
SG, †
SG, †
n 96929 @, GP,
10-13
06996
3/4”, 1-1/8”
NO DRILL all6 safety
–
n 44603 Ø,CP
10 20precautions when working beneath a vehicle and
– eye –wear protection.
–
IMPORTANT:
Observe
JT 2WD models only.
APPLICATIONS GUIDE
Except Mega Cab
Inc. Mega Cab
3/4”, 15/16” NO DRILL
CLASS V
n 51143 Ø,CP,GU
06-08
CLASS III/IV
CLASS III
WT. CARRYING
Except Mega Cab
Inc. Mega Cab
YEAR
MODEL
Pickup, Ram, Full Size 1500, Inc.
Mega Cab
APPLICATIONS GUIDE
CLASS II
CLASS I
137
DODGE
DODGE
136
REESE TOWPOWER
REESE TOWPOWER
Ramcharger All, Except w/Skid Shield 74-85
Ramcharger w/Deep Drop Bumper, 74-85
Except w/Skid Shield
82-85
Ramcharger
n 37042 –
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
6
1/4”, 1/2”, 5
9/16”
6
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
T-CONNECTOR
–
–
78058
78058
–
–
–
–
78058
–
–
74182
74182
78058
78058
BN
BN
–
–
74182
78508
BN
–
–
78104
–
–
–
74051
n 37152 –
n 37042 –
n 06097 –
10 45
30
n 37081 M,TH
15, 18, 21mm,
9/16", 11/16",
3/4", T50
13mm, 9/16”,
11/16”
5
7/16", 1/2" 30
Ramcharger All, Except w/Skid Shield 86-88
Ramcharger w/Deep Drop Bumper, 86-88
Except w/Skid Shield
86-93
Ramcharger
n 88001 –
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/4”, 1/2”, 5
9/16”
7/8”
WIRING
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
7/8”
5
10 45
30
7/16", 1/2" 30
74182
Spirit
89-95
Sprinter All 41 Wide Frames, Except 118
Wheelbase & Factory Metal Step Platform
Sprinter 144 & 170 Wheelbase Models
Only, Except w/Factory Step Bumper
Sprinter w/Factory Step Bumper
Stratus 4 Dr. Only
03-06
n 33089 Ø
18mm, 3/4”
NO DRILL
5
7.5 20
–
78104
–
–
2007
n 44576 Ø,HM
18, 19mm
NO DRILL
6
7.5 20
–
–
–
–
2007
08-09
n 44576 Ø,HM
n 44576 Ø,HM
18, 19mm
NO DRILL
NO DRILL
5
6
7.5 30
7.5 20
–
–
–
–
–
18, 19mm
–
–
–
08-09
95-00
n 44591 Ø,HM
18, 19mm
NO DRILL
5
7.5 30
–
–
–
78013
–
–
–
Stratus 2 Dr. Only
01-02
–
–
–
–
Stratus 4 Dr. Only
01-06
–
78013
–
–
Van, B-Series Full Size
71-77
–
78058
–
–
78-85
10
12 35 –
78058
–
–
10
12 35 –
–
–
–
NO DRILL
10
12 35 –
78058
–
–
NO DRILL
10
12 35 –
–
–
–
NO DRILL
10
12 35 74430
78058
BN
–
NO DRILL
10
12 35 74430
–
BN
–
78058
BN
–
n 06977 JR
n 77088 JR,KH
12, 13, 14mm,
11/16”
1/2”
13, 16, 17mm,
3/4”, 9/16”,
11/16”
3/8”
1/2”
40
40
30
06977 JR
13, 16, 17mm,
3/4”, 9/16”,
11/16”
1/2”
40
n 51037 Ø,DG
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
10 30
n 44094 Ø,BF,DG
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
10 30
n 41910 Ø,@, †
n 96910 Ø,@
n 51037 Ø,DG
n 51037 Ø,DG
86-92
n 51037 Ø,DH
1993
n 06962 Ø,DH
94-97
3/4”, 7/8”
NO DRILL
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
10 30
n 44094 Ø,BF,DG
5
10 30
n 44094 Ø,BF
5
10 30
n 44094 Ø,BF
n 33009 Ø,BF
n 36072 Ø,†,BF,DV
n 37070 Ø,BF
15
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
3/4”, 7/8”
NO DRILL
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
5
10 30
5
10 30 n 41910 Ø, @, DH,
5
5
5
6
HM, †
n 96910 Ø, @,
DH, HM
10 30 n 41910 Ø, @, DH,
HM, †
n 96910 Ø, @,
DH, HM
74430
HM, †
n 96910 Ø, @,
DH, HM
06996
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
10 30
n 44094 Ø,BF
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
5/8”, 11/16”,
3/4”, 7/8”
7.5 20
10 45
10 25
n 41910 Ø, @, DH,
n 51037 Ø,DH
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
–
10
12 35 74430
–
BN
–
10
12 35 74430
–
BN
–
10 30
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 37081 M,TH
n 37152 –
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
139
DODGE
DODGE
138
REESE TOWPOWER
REESE TOWPOWER
n 06962 Ø,BF
99-00
3/4”, 7/8”
NO DRILL
APPLICATIONS GUIDE
EAGLE
FIAT
n 06962 Ø,BF
01-03
n 06354 JR,TA
93-97
2012
Aerostar Van Extended Body
86-96
3/4”, 7/8”
NO DRILL
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
5
10 30
15
n 77255 Ø,GP,JR
7/8”, M8, M13
NO DRILL
13, 15mm, 9/16”, 1/8”, 3/8”,
11/16”, 7/8”
1/2”
n 44094 Ø
3/4”, 7/8”
NO DRILL
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
10 30
5
6
7.5 20
10 25
n 06033 J,GP
11/16”, 3/4”
Aerostar Van Standard Body
86-96
n 06033 GP,HC
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 3/4”
Aerostar Van Extended Body
1997
n 06033 J,GP
11/16”, 3/4”
1/2”
30 n 37152 –
n 88001 –
Bronco Full Size
78-79
10 30
n 06033 GP,HC
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
78-79
Bronco Full Size
80-81
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
n 44615 †,J
1/2”
30
1/2”
30 n 37152 –
7.5 20
10 25
10 30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
11/16”, 3/4” 1/4”, 7/16”, 3.5 6
1/2”, 1”
40
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
–
n 41910 Ø,@,HM, † 5/8”, 11/16”, NO DRILL
10
12 35 74430
–
BN
–
n 96910 Ø,@,HM
10
12 35 74430
–
BN
–
78058
BN
–
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
74888
n 41910 Ø,@,HM, † 5/8”, 11/16”, NO DRILL
10
12 35 74888
–
BN
–
n 96910 Ø,@,HM
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
10
12 35 74888
–
BN
–
n 41910 Ø,@,HM, † 5/8”, 11/16”, NO DRILL
10
12 35 85253
78058
BN,RD
–
n 96910 Ø,@,HM
10
12 35 85253
–
BN
–
85253
78058
BN,RD
–
–
–
–
–
85769
78104
BN,CH
–
–
78013
–
–
–
78013
–
–
74665
78058
BN
–
3/4”, 7/8”
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
40
7/16", 1/2" 50
1/2”
BN
74672
30
74051
n 44615 †,J
40
74665
78058
BN
–
n 36025
n 44108
30
45
–
78058
–
–
–
78058
–
–
74426
78058
BN
–
74426
78058
BN
–
11/16”, 3/4” 1/4”, 7/16”, 3.5 6
1/2”, 1”
FP
3/4”
1/2”
7.5 12
FP,GU,
18mm, 3/4” 1/2”
6 10
HM,HX
deep socket
FP,GP, GU,HX 18mm, 3/4” 1/2”
6 10
deep socket
–
3/4”
1/2”
5 8
n 36025
n 37081 M
n 36025 FP
n 44108 FP,GU,
7/8”
3/4”
1/2”
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
13, 18, 19mm,
n 37081 M
7/8”
80-86
06996
5
6
5
78058
40
n 44109
Bronco Full Size w/Deep Drop Bumper
NO DRILL
NO DRILL
7/16", 1/2" 50
n 37042 –
1997
5
3/4”, 7/8”
3/4”, 7/8”
74430
10 30
30
n 88001 –
Aerostar Van Standard Body
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
n 33009 Ø,BF
n 37070 Ø,BF
n 44094 Ø
FOOTNOTES
7.5 20
10 25
5
5
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
3/4”, 7/8” NO DRILL
5
6
40
n 37042 –
Bronco Full Size w/Deep Drop Bumper
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
STYLE
n 44094 Ø
NO DRILL
NO DRILL
01-03
500, All, Inc. 500c (Cabrio)
FORD
10 30
n 33009 Ø,BF
n 37070 Ø,BF
n 51037 Ø
Vision
5
3/4”, 7/8”
3/4”, 7/8”
5
45
30
10 45
1/2”
7.5 12 30
6 10 45
1/2”
6
10 45
1/2”
5
5
8 30
10 45
NO DRILL
JT 2WD models only.
APPLICATIONS GUIDE
Van, Ram Full Size
5/8”, 11/16”, NO DRILL
3/4”, 7/8”
15
n 51037 Ø
Van, Ram All, Except 109.3 Wheelbase
WRENCHES
n 33009 Ø,BF
n 37070 Ø,BF
15
n 51037 Ø
Van, Ram Full Size
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
NO DRILL
WIRING
STANDARD WIRE
3/4”, 7/8”
CLASS V
T-CONNECTOR
n 06962 Ø,BF
1998
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
141
DODGE - FORD
DODGE - FORD
140
REESE TOWPOWER
REESE TOWPOWER
n 37042 –
Bronco Full Size
n 37042 –
Bronco Full Size
n 37042 –
Bronco II
n 37042 –
C-Max, All Styles
Contour All, Except SVT
Crown Victoria / LTD
2013
95-00
75-91
n 77284 GP,JR,KH
n 77009 –
06996
13mm, 11/16”
1/2”
13mm, 3/4”
1/2”
6
10 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 45
n 36025 –
5
8
deep socket
3/4”
1/2”
–
78058
–
–
78058
–
–
78058
–
–
78104
–
–
78058
78058
–
–
–
–
OEM REPLACE.
BN
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
STYLE
1/2”
78058
30
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
30
n 36025 FP
3/4”
1/2”
7.5 12 30
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 45
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
–
30
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
40
n 36025 FP
3/4”
1/2”
7.5 12 30
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 45
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
74669
30
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
30
n 36025 FP
3/4”
1/2”
7.5 12 30
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 45
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
74669
30
74669
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
7/16", 1/2" 35
84-90
n 88001 –
18mm, 3/4”
deep socket
HM,HX
74426
74669
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 44108 FP,GU,
7/16", 1/2" 35
94-96
n 88001 –
7.5 12 30
74051
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
30
1/2”
7/16", 1/2" 35
92-93
n 88001 –
6
3/4”
74426
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/4”, 1/2”, 5
9/16”
n 36025 FP
7/16", 1/2" 30
87-91
n 88001 –
6
7/16", 1/2" 30
25
30
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
–
30
74203
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Bronco Full Size
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/4”, 1/2”, 5
9/16”
STANDARD WIRE
n 88001 –
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
WIRING
T-CONNECTOR
n 37042 –
FOOTNOTES
HITCH
NUMBER
n 37152 –
82-86
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Bronco Full Size
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
143
FORD
FORD
142
REESE TOWPOWER
REESE TOWPOWER
E-150 Econoline Van Full
Size, All Models
Size, All Models
Size, All Models
Size, All Models
3/4”, 7/8”
1/2”
75-91
n 88002 –
3/4”
1/2”
30 n 51007 HM, HX, O,
PA, T
3/4”, 7/8”
1/2”
95-96
97-03
n 06127 Ø,EF,HM
3/4”, 7/8”
NO DRILL
20 n 51007 HM, HX, O,
3/4”, 7/8”
n 88002 –
3/4”
1/2”
30 l 37051 –
n 37041 –
20 n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
n 06127 Ø,EF,HM
3/4”, 7/8”
NO DRILL
n 88002 –
3/4”
1/2”
n 06127 Ø,EF,HM
3/4”, 7/8”
NO DRILL
n 88002 –
3/4”
1/2”
00-03
n 88002 –
04-07
PA, T
3/4”
1/2”
PA, T
PA, T
30 l 37051 –
n 37041 –
20 n 51007 HM, HX, O,
PA, T
30 l 37051 –
n 37041 –
l 51094 Ø,RT
30 l 51094 Ø,RT
2008
n 88002 –
2009
Size, All Models
Size, All Models
3/4”
1/2”
1/2”
1/2”
5
5
5
6 20
6 20
10 30
5
5
6
6 20
6 20
8 15
1/2”
3/4”
1/2”
3/4”
1/2”
3/4”
NO DRILL
l 37041 –
30 l 51094 Ø,RT
30
75-91
n 88002 –
3/4”
1/2”
30 n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
13/16”, 7/8” 9/16”
10
12 30 74664
–
HG
–
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10
12 30 74665
78058
–
–
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
13/16”, 7/8” 9/16”
10
12 30 74665
–
BN
–
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10
12 30 74665
78058
BN
85219
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
10
12 30 74665
–
BN
–
l 44532 Ø
3/4”
NO DRILL
6
8
15 n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
10
12 30 74665
78058
BN
85219
n 96926 Ø,@,HM 13/16”, 7/8” NO DRILL
n 96945 Ø,@,HM 13/16”, 7/8” NO DRILL
15 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10 12 30 74665
10 12 30 74665
10 12 30 –
BN
–
78058
–
–
10 12 30
10 12 30
10 12 30 –
10 12 30 –
10 12 30 85774
–
–
78058
–
–
CH
–
–
85219
–
CH
–
1/2”
6
10 20 n
n
n
n
n
20
PA, T
1/2”
5
6
3/4”
1/2”
3/4”
NO DRILL
5
6
6 20
8 15
3/4”, 7/8”
1/2”
n 88002 –
3/4”
1/2”
30 l 37051 –
l 37041 –
20 n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
30 l 37051 –
l 37041 –
3/4”
1/2”
3/4”
1/2”
PA, T
PA, T
5
l 44532 Ø
l 44652 CS,HM
3/4”
NO DRILL
3/4”, 7/8”
1/2”
6
6
96906
41926
96926
96945
41906
@,HM,HY
1/2”
5
10 30
3/4”
1/2”
3/4”
1/2”
5
5
5
6 20
6 20
10 30
5
5
6
6
20
20
13/16”, 7/8” 9/16”
13/16”, 7/8” 9/16”
Ø,@,HM, † 13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
@,HM,HY
13/16”,
7/8”, †
8 15 n 96906 @,HM,HY
10 20 n 41926 Ø,@,HM
9/16”
13/16”, 7/8” 9/16”
13/16”,
NO DRILL
7/8”, †
13/16”, 7/8” NO DRILL
13/16”, 7/8” NO DRILL
13/16”, 7/8” NO DRILL
n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
20
10 30
OEM REPLACE.
l 44652 CS,HM
3/4”, 7/8”
3/4”
FOOTNOTES
–
l 44652 CS,HM
6 20
8 15
WT. DISTRIB.
INSTALL TIME
–
6
6
5
6
WT. CARRYING
78013
5
5
1/2”
DRILL BITS
12 30 74664
1/2”
NO DRILL
WRENCHES
10
1/2”
3/4”
FOOTNOTES
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
3/4”
3/4”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
5
3/4”
3/4”, 7/8”
1/2”
1/2”
8
20 n 51007 HM, HX, O,
3/4”
3/4”, 7/8”
6
NO DRILL
n 88002 –
10 20
NO DRILL
6
–
6
3/4”
5
–
1/2”
l 44532 Ø
1/2”
78058
3/4”, 7/8”
8 15
20
20
–
–
–
–
–
–
HX, O, P
n 44027 HX,O,PA,T
6
3/4”, 7/8”
NO DRILL
–
NO DRILL
3/4”
n 06127 Ø,EF,HM
3/4”, 7/8”
10 20
10 30
30
1/2”
n 06127 Ø,EF,HM
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
6 20
6 20
10 30
3/4”, 7/8”
6
5
n 96926 Ø,@,HM
n 96945 Ø,@,HM
n 96945 Ø,@,HM
3/4”
06996
5
5
5
l 37041 –
l 51094 Ø,RT
n 88002 –
95-96
1/2”
1/2”
3/4”
10-12
92-94
3/4”
1/2”
1/2”
1/2”
l 44652 CS, HM,
3/4”
1/2”
3/4”, 7/8”
3/4”, 7/8”
10 30
l 44652 CS, HM, HX, O, P
n 44027 HX,O,PA,T
10 30
3/4”
10 30
3/4”, 7/8”
5
3/4”
5
78058
78013
78058
n 44027 HX,O,PA,T
1/2”
l 37051 –
l 37051 –
3/4”
5
1/2”
74428
–
–
10 30
30
09-12
n 88002 –
Size, All Models
Size, All Models
3/4”
5
STANDARD WIRE
30 n 51007 HM, HX, O,
n 88002 –
E-150 Econoline Van
Full Size, All Models
E-150 Econoline Van
Full Size, All Models
DRILL BITS
1/2”
l 37051 –
n 37041 –
Size, All Models
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
3/4”
WIRING
l 44532 Ø
l 44652 Ø,CS,HM
3/4”
NO DRILL
3/4”, 7/8”
1/2”
6
6
8 15 n
10 20 n
n
n
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS, HM,
96906
41926
96926
96945
@,HM,HY
13/16”, 7/8” 9/16”
Ø,@,HM, † 13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
10
10
12 30 85774
12 30
–
BN
10 12 30
10 12 30
10 12 30 85774
10
12 30 85774
10 12
10 12
10 12
10 12
30
30
30
30
CH
78058
CH
85219
85774
85774
85774
85774
–
–
–
CH
CH
–
–
–
–
78058
–
–
CH
CH
HX, O, P
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
6
10 20
3/4”, 7/8”
1/2”
5
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10
12 30 74664
78013
–
–
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
13/16”, 7/8” 9/16”
10
12 30 74664
–
HG
–
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10
12 30 74665
78058
–
–
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
10
12 30 74665
–
BN
–
13/16”, 7/8” 9/16”
JT 2WD models only.
APPLICATIONS GUIDE
Size, All Models
n 88002 –
CLASS V
92-97
98-07
75-83
92-94
CLASS III/IV
CLASS III
T-CONNECTOR
Size, All Models
YEAR
MODEL
Size, All Models
APPLICATIONS GUIDE
CLASS II
CLASS I
145
FORD
FORD
144
REESE TOWPOWER
REESE TOWPOWER
Size, All Models
T-CONNECTOR
STANDARD WIRE
BN
85219
3/4”
1/2”
6 20
6 20
8 15
3/4”, 7/8”
1/2”
6
10 20 n 96906 @,HM,HY
10
12 30 74665
–
BN
–
1/2”
5
5
6
l 44652 CS,HM
3/4”
l 44532 Ø
3/4”
NO DRILL
6
8
74665
78058
BN
85219
12 30 74665
78058
BN
85219
BN
–
3/4”
NO DRILL
DRILL BITS
30 l 37051 –
l 37041 –
l 51094 Ø,RT
HITCH
NUMBER
1/2”
DRILL BITS
3/4”
WRENCHES
n 88002 –
15
n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
04-07
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
n 96926 Ø,@,HM 13/16”, 7/8” NO DRILL
n 96945 Ø,@,HM 13/16”, 7/8” NO DRILL
10 20 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
l 44532 Ø
3/4”
NO DRILL
6
8
n 96906 @,HM,HY
n 88002 –
3/4”
1/2”
30 l 51094 Ø,RT
l 37051 –
n 37041 –
NO DRILL
6
8 15
3/4”
1/2”
3/4”
1/2”
5
5
6
6
3/4”
2008
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
n 96926 Ø,@,HM 13/16”, 7/8” NO DRILL
n 96945 Ø,@,HM 13/16”, 7/8” NO DRILL
10 20 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
l 44532 Ø
3/4”
NO DRILL
6
8
n 96906 @,HM,HY
n 88002 –
3/4”
1/2”
30 l 51094 Ø,RT
l 37051 –
n 37041 –
NO DRILL
6
8 15
3/4”
1/2”
3/4”
1/2”
5
5
6
6
3/4”
09-12
3/4”
1/2”
30 l 51094 Ø,RT
l 37051 –
n 37041 –
NO DRILL
6
8 15
3/4”
1/2”
3/4”
1/2”
5
5
6
6
3/4”
n 88002 –
3/4”
1/2”
30 n 51007 HM, HX, O,
PA, T
3/4”, 7/8”
1/2”
5
n 06127 Ø,EF,HM
92-94
3/4”, 7/8”
NO DRILL
20 n 51007 HM, HX, O,
PA, T
l 37051 –
n 37041 –
n 88002 –
Size, All Models
95-96
3/4”
1/2”
–
–
–
–
12 30 –
78058
–
–
–
–
–
78058
CH
85219
12 30 85774
85774
–
78058
CH
CH
–
85219
12 30 85774
78058
CH
85219
CH
–
10 12 30 –
10 12 30
10 12 30 85774
10
10
12 30 85774
78058
CH
85219
10
12 30 85774
85774
–
78058
CH
CH
–
85219
12 30 85774
78058
CH
85219
CH
–
13/16”, 7/8” NO DRILL
l 44532 Ø
3/4”
NO DRILL
6
8
n 96906 @,HM,HY
15 n
13/16”, 7/8” 9/16”
CH
CH
20
20
10 30
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS, HM,
3/4”, 7/8”
1/2”
6
10 20
1/2”
5
10 30
1/2”
1/2”
5
5
6
6
30 n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
5
10 30
n 44027 HX,O,PA,T
3/4”, 7/8”
n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS,HM
l 44652 CS,HM
–
78058
–
10 20 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
3/4”
PA, T
12 30 –
–
10 12 30 85774
10 12 30 85774
10 12 30 85774
13/16”, 7/8” NO DRILL
13/16”, 7/8” NO DRILL
6
3/4”
PA, T
06996
3/4”, 7/8”
–
n 96926 Ø,@,HM
n 96945 Ø,@,HM
n 96945 Ø,@,HM
1/2”
HX, O, P
Size, All Models
–
10
3/4”, 7/8”
10-12
75-91
78058
n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
l 44652 CS,HM
E-250 Econoline Van Full Size, 09-12
Inc. E-250 Super Wagon Cargo Van
Size, All Models
Size, All Models
BN
20
20
2009
n 88002 –
13/16”, 7/8” 9/16”
10
15
E-250 Econoline Van Full Size, 2008
Except E-250 Super Wagon Cargo Van Models
10
–
20
20
n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
E-250 Econoline Van Full Size, 2008
10 12 30 74665
10 12 30 74665
10 12 30 –
15
Size, All Models
Size, All Models
13/16”, 7/8” 9/16”
10
n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
10
n 96926 Ø,@,HM
n 96945 Ø,@,HM
10 12 30 85774
10 12 30 85774
13/16”, 7/8” NO DRILL
13/16”, 7/8” NO DRILL
–
CH
74664
78013
–
–
74664
78013
–
–
–
–
HG
–
78058
BN
–
20
20
1/2”
5
n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10 30 n 96906 @,HM,HY 13/16”, 7/8” 9/16”
3/4”, 7/8”
1/2”
3/4”, 7/8”
1/2”
6
6
10 20
10 20
10 12 30 74664
10 12 30 74664
74665
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Size, All Models
13/16”, 7/8” 9/16”
OEM REPLACE.
WT. DISTRIB.
INSTALL TIME
78058
FOOTNOTES
WT. CARRYING
12 30 74665
DRILL BITS
10
WRENCHES
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
FOOTNOTES
WRENCHES
5
HITCH
NUMBER
FOOTNOTES
1/2”
3/4”, 7/8”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
STYLE
3/4”, 7/8”
20 n 51007 HM, HX, O,
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 44027 HX,O,PA,T
WRENCHES
INSTALL TIME
STYLE
10 30
NO DRILL
HITCH
NUMBER
FOOTNOTES
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
5
3/4”, 7/8”
WIRING
1/2”
n 06127 Ø,EF,HM
PA, T
CLASS V
FOOTNOTES
97-03
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Size, All Models
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
147
FORD
FORD
146
REESE TOWPOWER
REESE TOWPOWER
n 88002 –
97-03
Size, All Models
Inc. Super Wagon
Size, All Models
Size, All Models
Size, All Models
Size, All Models
1/2”
11-13
Escape
01-02
12 30 74665
–
BN
–
13/16”, 7/8” NO DRILL
10
12 30 74665
78058
BN
–
10 12 30 74665
10 12 30 74665
10 12 30 –
–
–
78058
BN
BN
–
–
–
–
10 12 30
10 12 30
10 12 30
10 12 30
10 12 30
–
–
–
–
–
–
–
–
–
–
85774
78058
–
–
10 12 30
10 12 30
10 12 30
10 12 30
10 12 30
85774
85774
85774
85774
85774
–
–
–
CH
CH
–
–
–
n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
10 30 n 96906 @,HM,HY 13/16”, 7/8” 9/16”
n 51007 HM, HX, O,
3/4”, 7/8”
1/2”
5
10 30
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20
1/2”
5
10 30
n 44027 HX,O,PA,T
3/4”, 7/8”
1/2”
5
10 30 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
5
5
6
6 20
6 20
8 15
PA, T
1/2”
30 l 37051 –
n 37041 –
l 51094 Ø,RT
3/4”
1/2”
3/4”
1/2”
3/4”
NO DRILL
PA, T
l 51094 Ø,RT
3/4”
3/4”
NO DRILL
NO DRILL
6
6
l 51094 Ø,RT
3/4”
NO DRILL
6
OEM REPLACE.
10
5
FOOTNOTES
13/16”, 7/8” 9/16”
1/2”
WT. DISTRIB.
INSTALL TIME
–
3/4”, 7/8”
WT. CARRYING
BN
DRILL BITS
78058
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
12 30 74665
n 44027 HX,O,PA,T
l 51094 Ø,RT
8 15
8 15
n 96906 @,HM,HY
l 44532 Ø
3/4”
NO DRILL
6
8 15
8
15 n 96945 Ø,@,HM
n 41926 Ø,@,HM, † 13/16”, 7/8” NO DRILL
n 96926 Ø,@,HM 13/16”, 7/8” NO DRILL
15 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
l 44532 Ø
3/4”
NO DRILL
6
8
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n
n
n
n
8 15 n
96906
41926
96926
96945
41906
10 20 n
n
n
n
n
96906
41926
96926
96945
96945
l 44532 Ø
3/4”
NO DRILL
6
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
l 44532 Ø
3/4”
NO DRILL
6
8
l 44652 CS,HM
3/4”, 7/8”
1/2”
6
10 20 n
n
n
n
10-12
@,HM,HY
13/16”, 7/8” 9/16”
Ø,@,HM, † 13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
@,HM,HY, † 13/16”, 7/8” 9/16”
@,HM,HY
13/16”, 7/8” 9/16”
Ø,@,HM, † 13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
15 n 41906 @,HM,HY, † 13/16”, 7/8” 9/16”
96906
41926
96926
96945
@,HM,HY
13/16”, 7/8” 9/16”
Ø,@,HM, † 13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
Ø,@,HM
13/16”, 7/8” NO DRILL
10 12 30 74665
10 12 30 74665
10
12 30 85774
10 12
10 12
10 12
10 12
30
30
30
30
–
CH
CH
CH
78058
CH
85738
85774
85774
85774
85774
–
–
–
CH
CH
–
–
–
CH
CH
45 n 51200 CP,GP,JR,KH 5.5, 8mm,
1/2”
4
0
55
n 44567 Ø, CP, GP,
NO DRILL
3.5
45
85774
78058
CH
–
4
0
55
NO DRILL
3.5
3.5 4
45
45
74707
85742
78058
–
CH
1/2”
n
n
NO DRILL
n 51200 CP,GP,JR,KH 5.5, 8mm,
CH
–
–
NO DRILL
3.5 4
45
NO DRILL
3.5 5
35
74664
78013
HG,RW
–
3/4”
3/4”
n
l 51142 Ø,RT,KH
n 37152 KH
n 37042 KH
10, 18mm,
11/16”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
3.5 5 35
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
l
5.5, 8mm, 3/4”
JR, KH
44641 Ø,GP,JR,KH 5.5, 8mm, 3/4”
44658 Ø,GP,JR,KH 5.5mm or 7/32”,
8mm, 3/4”
44672 Ø,GP,JR,KH 8mm, 5.5mm (or
7/32”), 3/4”
10, 18mm,
33039 Ø,KH
11/16”
60
7/16", 1/2" 60
74664
l 51142 Ø,RT
2003
n 37152 KH
n 37042 KH
06996
10
10 30
3/4”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
–
5
n 88002 –
n 88001 –
BN
1/2”
3/4”, 7/8”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
3/4”, 7/8”
20 n 51007 HM, HX, O,
n 88001 KH
74665
30 n 51007 HM, HX, O,
09-12
Edge Sport
–
–
20
20
2009
09-10
11-13
–
BN
6
6
2008
Edge Sport
Edge All, Except Sport Models
–
–
5
5
NO DRILL
NO DRILL
–
1/2”
3/4”, 7/8”
5.5, 8mm, 3/4”
BN
1/2”
n 06127 Ø,EF,HM
n 06525 Ø,GP,JR,KH
78058
3/4”
04-07
07-10
74665
3/4”
PA, T
00-03
Size, All Models
Edge All, Except Sport Models
Escape
10 30
7/16", 1/2" 60
10, 18mm,
11/16”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
3.5 5 35
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
l 33039 Ø
10, 18mm,
11/16”
NO DRILL
3.5 5
35
74664
HG,RW
78013
HG,RW
–
60
74664
HG,RW
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Size, All Models
3/4”
5
STANDARD WIRE
l 37051 –
n 37041 –
1/2”
WIRING
T-CONNECTOR
PA, T
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
3/4”, 7/8”
HITCH
NUMBER
20 n 51007 HM, HX, O,
DRILL BITS
INSTALL TIME
STYLE
DRILL BITS
NO DRILL
WRENCHES
3/4”, 7/8”
CLASS V
FOOTNOTES
n 06127 Ø,EF,HM
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Inc. Super Wagon
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
149
FORD
FORD
148
REESE TOWPOWER
REESE TOWPOWER
n 37152 KH
n 37042 KH
n 88001 –
05-07
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6
20
l 44647 Ø
n 06417 HM
7/8”
1”, 3/8”
20
l 44680 Ø.HM
n 51191 †,HM
n 51194 HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
20
20
1”, 3/8”
10, 18mm, NO DRILL
5/8”
10, 18,
NO DRILL
22mm, 5/8”
n 51191 †,HM
7/8”
1”, 3/8”
20
n 51194 HM
7/8”
1”, 3/8”
20
Escort Sedan
1997
n 77018 –
Escort Sedan
Escort ZX2
Escort Wagon
98-99
98-03
1997
n 77022 –
n 77022 –
n 77018 –
Escort Wagon
98-99
n 77078 †,GP,JR
Excursion
Excursion w/ Factory 7-way
Expedition
00-03
00-05
97-02
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
10, 18mm, NO DRILL
5/8”
5/8”
3.5 5
25
74703
78104
–
–
3.5 5.25 25
74702
–
BN,CH
–
3.5 5
25
74702
–
BN,CH
–
25
85774
78058
CH
–
3.5 5.25 25
85774
–
CH
–
78070
78058
Factory Tow
Package
models only
10, 18mm, NO DRILL
5/8”
5/8”
3.5 5
BN,CH
3.5 5
25
85774
–
CH
3.5 4
15
35
–
78104
–
–
35
74665
78058
–
–
74665
74665
–
78058
78058
78013
–
–
9/16”
30
30
35
–
–
–
–
1/2”
20
–
78013
–
–
74665
74682
74665
–
78058
78058
–
BN
9/16”, 11/16”,
9/16”
13/16”
9/16”, 11/16”,
9/16”
13/16”
3/4”, 11/16”, 13/16” 1/2”
3/4”, 11/16”, 13/16” 1/2”
11/16”
NO DRILL
11/16”
NO DRILL
13/16”, 7/8”,
15/16”
1/2”
15 l 97231 Ø,HM
15
15 n 51024 Ø,HM
2003
11-13
l 51202 Ø,HM, JR,L
Explorer 2 & 4 Dr.
91-94
n 06365 Ø
13/16”, 7/8”,
15/16”
1/2”
10, 18mm, NO DRILL
5/8”
10, 18,
NO DRILL
22mm, 5/8”
11/16”
NO DRILL
7/8”
5
10 15
l 44676 Ø,HM, †
l 44681 Ø,HM,TP
11/16”
NO DRILL
11/16”
NO DRILL
n 33052 Ø,GP
3/4”, 7/8”
n 44032 Ø,HM
n 44622 Ø,GP
3.4 4
3.5 5
CH
15
15
NO DRILL
5
8
20
7/8”, 3/4”
NO DRILL
7/8”, 3/4”
NO DRILL
5
6
10 20
10 15
–
BN,CH
BN
85219
85219
4
5
45
l 44659 Ø, HM, JR, L 18mm, 3/4” NO DRILL
4
5
45
74665
85759
78058
78058
BN
85219
85219
l 37051 –
18,19mm, NO DRILL
3/4",11/16"
3/4”, 13/16” 1/2”
5
6
25
l 33051 –
5
6
20
74190
–
BN
–
n 37041 –
3/4”, 13/16” 1/2”
5
6
25
n 44100 –
5
6
20
n 51033 –
15, 18,
NO DRILL
21mm, 3/4”
15, 18,
NO DRILL
21mm, 3/4”
3/4”, 13/16” 1/2”
5
6 15
5
6 15
l 33051 Ø,JF
5
6
20
74724
–
BN,GC
74885
5
5
6
6
n 37012 –
l 44067 Ø,JF
5
5
6
6
50
15
5
6 15
5
6
20
15 n 51033 –
l 37051 JF
n 37041 JF
n 51033 –
06996
–
85774
n 06365 –
95-97
–
25
Expedition
Explorer, All Styles
Explorer 2 & 4 Dr.
78104
3.5 5
n 06145 Ø,HM
n 06147 Ø,HM,TP
9/16”, 11/16”,
13/16”
10mm, 3/4”,
11/16”, 13/16”
–
74703
l 44647 Ø
l 97232 Ø,HM
n 77018 –
35
25
20
l 97207 Ø, †
2013
2013
91-96
3.5 5
3.5 5
l 44680 Ø.HM
Ecsape All, Except S Models
Ecsape All, Inc. S Models
Escort All Models
NO DRILL
74672
1”, 3/8”
7/8”
10, 18mm,
11/16”
60
n 06417 †,HM
n 06417 HM
WRENCHES
STYLE
l 33039 Ø
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
3.5 5 35
7/16", 1/2" 60
l 97232 Ø,HM
08-12
NO DRILL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/8”
l 97207 Ø, †
Escape All, Inc. Hybrid
10, 18mm,
11/16”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
WIRING
3/4”, 13/16” 1/2”
15, 18,
NO DRILL
21mm, 3/4”
25
25
n 44100 Ø
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16”
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16” 1/2”
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16”
BN
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Escape All, Inc. Hybrid
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51142 Ø,RT
2004
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Escape
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
151
FORD
FORD
150
REESE TOWPOWER
REESE TOWPOWER
l 37051 JF
n 37041 JF
n 51033 Ø
Explorer 2 Dr. Sport
n 06365 –
2001
13/16”, 7/8”,
15/16”
1/2”
15 n 51033 Ø
l 37051 Ø,JF
n 37041 Ø,JF
n 51033 Ø
n 06365 –
2001
13/16”, 7/8”,
15/16”
1/2”
15 n 51033 Ø
l 37051 Ø,JF
n 37041 Ø,JF
n 51033 Ø
Explorer 2 Dr. Sport
n 06365 –
02-03
13/16”, 7/8”,
15/16”
1/2”
3/4”, 13/16” 1/2”
15, 18,
NO DRILL
21mm, 3/4”
15, 18,
NO DRILL
21mm, 3/4”
3/4”, 13/16” 1/2”
3/4”, 13/16” 1/2”
15, 18,
NO DRILL
21mm, 3/4”
15, 18,
NO DRILL
21mm, 3/4”
3/4”, 13/16” 1/2”
3/4”, 13/16” 1/2”
15, 18,
NO DRILL
21mm, 3/4”
6
6
n 37012 Ø
l 44067 Ø,JF
5
6 15
n 44100 Ø
5
6 15
l 33051 Ø,JF
5
5
6
6
n 37012 Ø
l 44067 Ø,JF
5
6 15
30
30
30
30
n 44100 Ø
l 33051 Ø,JF
15
n 51033 Ø
NO DRILL
5
6 15
n 37012 Ø
l 37051 Ø,JF
15, 18,
21mm, 3/4”
3/4”, 13/16”
1/2”
5
6
30
l 44067 Ø,JF
n 37041 Ø,JF
3/4”, 13/16”
1/2”
5
6
30
n 44100 Ø
n 51033 Ø
15, 18,
21mm, 3/4”
NO DRILL
5
6 15
Explorer 4 Dr.
Explorer 4 Dr.
2001
02-03
l 33031 Ø,KL
Explorer 4 Dr.
04-05
l 33031 Ø,KL
Explorer Models w/1-1/4 Receivers Only 06-10
2001
Explorer Sport Trac
l 51141 Ø,RT,CS
Explorer Sport Trac
02-03
l 51141 Ø,RT,CS
Explorer Sport Trac
04-05
l 51141 Ø,RT,CS
07-10
Explorer Sport Trac
F-100, F-150, F-250, F-350 63-72
n 51016 HM
n 51017 GP
63-72
F-100, F-150, F-250,
F-350 w/Deep Drop Bumper
F-100, F-150, F-250, F-350 73-79
l 37069 GU
n 51016 HM
n 51017 GP
13/16”, 7/8”,
15/16”
13/16”, 7/8”,
15/16”
13/16”, 7/8”,
15/16”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
15, 18mm,
7/8”
15, 18mm,
7/8”
13mm, 3/4”
BN,GC
74885
20
1/2”
5
6
20
74724
–
BN,GC
74885
1/2”
1/2”
5
5
6
6
40
45
NO DRILL
5
6
20
1/2”
5
6
20
74724
–
BN,GC
74885
1/2”
1/2”
5
5
6
6
40
45
NO DRILL
5
6
20
1/2”
5
6
20
74665
78058
BN
85219
1/2”
5
6
40
5
6
45
5
6
20
NO DRILL
5
8
74724
74665
78104
78058
BN,GC
20
BN
85219
85219
NO DRILL
5
8
20
–
78058
–
–
NO DRILL
5
5
8
6
25
15
–
–
78013
78058
–
BN
–
–
5
6
15
–
78058
BN
–
5
6
15
–
78058
BN
–
–
–
–
78058
–
30
BN
85219
–
6 15
n 44542 Ø,KL
l 33020 Ø,CS
NO DRILL
5
6 15
l 33020 Ø,CS
NO DRILL
5
6 15
l 33020 Ø,CS
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
n 33065 FP
3/4”, 7/8”
1/2”
5
8
5
10 40
n 37087 FP
3/4”, 7/8”
1/2”
6
10 45
n 37081 FP,M
7/8”
5
10 45
–
78058
BN
–
3/4”
–
78058
BN
–
–
78058
BN
–
9/16”, 3/4”
1/2”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
15/16”, 7/8”, NO DRILL
13/16”
15/16”, 7/8”, NO DRILL
13/16”
15/16”, 7/8”, NO DRILL
13/16”
5
5
7.5 35
10 40
n 36025 FP,GU
l 37034 GU
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
5
10 40
l 37094 GU
15/16", 3/4” 5/8”
7
12 35
1/2”
6
10 40
1/2”
6
10 40
1/2”
5
5
8 30
10 45
n 37081 FP,M
06996
–
5
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 GH
73-79
6
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16”
74724
NO DRILL
n 44108 FP,GU,
F-100, F-150, F-250,
F-350 w/Deep Drop Bumper
5
OEM REPLACE.
5
5
NO DRILL
FOOTNOTES
l 33051 Ø,JF
40
45
STANDARD WIRE
6 15
6
6
T-CONNECTOR
5
5
5
WT. DISTRIB.
INSTALL TIME
n 44100 Ø
1/2”
WT. CARRYING
6 15
13/16”,
7/8”,15/16”
15, 18, 21mm,
3/4”, 15/16”
13/16”,
7/8”,15/16”
3/4”, 15/16”
DRILL BITS
5
20
WRENCHES
n 37012 Ø
l 44067 Ø,JF
30
30
6
FOOTNOTES
6
6
5
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16” 1/2”
HITCH
NUMBER
5
5
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
l 33051 Ø,JF
DRILL BITS
6 15
WRENCHES
5
FOOTNOTES
DRILL BITS
15, 18,
NO DRILL
21mm, 3/4”
3/4”, 13/16” 1/2”
WIRING
1/2”
7/8”
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Explorer 4 Dr.
WRENCHES
FOOTNOTES
HITCH
NUMBER
15 n 51033 Ø
STYLE
1/2”
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
13/16”, 7/8”,
15/16”
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 06365 Ø
98-00
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Explorer 2 & 4 Dr.
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
153
FORD
FORD
152
REESE TOWPOWER
REESE TOWPOWER
10 40
l 37094 GU
15/16", 3/4” 5/8”
7
5
10 40
n 44026 GU
3/4”, 7/8”
1/2”
5
10 30
1/2”
6
10 40
1/2”
6
10 40
1/2”
5
5
8 30
10 45
n 51017 FT,GP
HITCH
NUMBER
n 44108 FP,GU,
F-100, F-150, F-250,
F-350 w/Deep Drop Bumper, Inc. SuperCab,
Will Not Fit Custom Fascia
F-100, F-150, F-250,
F-350 Styleside, All Models Inc. SuperCab
n 37081 FP,K,M
80-86
7/8”
87-91
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 35 l 37069 GU
n 37096 HX
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
F-100, F-150, F-250,
F-350 w/Deep Drop Bumper, Inc. SuperCab
F-150 Flareside w/Rear Fascia
92-93
92-93
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 37096 HX
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
92-93
06996
12
14 45
74426
–
BN
–
–
BN
–
n 96904 @, GP,
10
12 30 74181
–
BN
–
12
14 45
–
BN
–
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
3/4”
1/2”
6.5 120
l 37034 GU
15/16", 3/4” 5/8”
7
12 35
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
l 37094 GU
15/16", 3/4” 5/8”
7
12 35
10 40
n 44026 GU
3/4”, 7/8”
1/2”
5
10 30
10 30
n 44108 FP,GU,
1/2”
6
10 40
1/2”
6
10 40
1/2”
5
5
8 30
10 45
74181
–
BN
–
74181
78058
BN
–
1/2”
9/16”, 3/4” 1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”
–
1/4”, 1/2”, 5
9/16”
5
7/16", 1/2" 35
7/16", 1/2" 35 l 37069 GU
BN
3/4”
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
1/2”
7.5 12 30
n 37081 FP,K,M
7/8”
n 36025 FP
3/4”
1/2”
7.5 12 30
n 36047 –
3/4”, 9/16”
1/2”
5
n 36025 FP,GU
3/4”
7.5 35
l 37034 GU
l 37094 GU
6.5 120
92-93
n 88001 GU
–
12 30 74181
7
74181
74181
n 41904 @,HD,KF, † 18, 21mm,
10
12 30 74181
78058
BN
–
n 96904 @, GP,
10
12 30 74181
–
BN
–
78058
BN
–
5
1/4”, 1/2”, 5
9/16”
3/16”,
5
9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
3/4”, 7/8” 1/2”
5
9/16”
3/4”, 13/16”,
7/8”
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
7.5 12 30
74181
15/16", 3/4” 5/8”
7
7
12 35
12 35
74181
n 44026 GU
3/4”, 7/8”
1/2”
5
10 30
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 40
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
10 30
n 36025 –
n 37081 FP,K,M
5
5
8 30
10 45
HM,HX
1/2”
15/16", 3/4” 5/8”
deep socket
3/4”
1/2”
7/8”
BN
30
HD, KF
F-150 Styleside/Flareside, All Models Inc.
SuperCab
12 30 74426
n 36025 FP,GU
5
87-91
n 88001 GU
10
7.5 35
9/16”, 3/4” 1/2”
15,17,18,
19,21,
22mm,
9/16”,3/4”
13, 18,
19mm, 3/4”,
13/16”
13, 18,
19mm, 3/4”,
13/16”,
7/8”
3/4”, 7/8”
–
10
HD, KF
n 45002 #,GU,TF
n 88001 GU
BN
n 41904 @,HD,KF, † 18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
F-100, F-150, F-250, F-350 87-91
Styleside/Flareside, All Models Inc. SuperCab
–
74181
BN
78058
BN
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
12 30 74426
OEM REPLACE.
5
10
FOOTNOTES
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
3/4”
1/2”
STANDARD WIRE
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
12 35 n 96904 @, GP,
13/16”, 7/8”
T-CONNECTOR
n 51016 FT,HM
HD, KF
12 35 n 45002 #,GU,TF
KF, †
WT. DISTRIB.
INSTALL TIME
7
7.5 12 30 n 41904 @, GP, HD, 18, 21mm, 3/4”, 9/16”
WT. CARRYING
15/16", 3/4” 5/8”
DRILL BITS
l 37034 GU
WRENCHES
7.5 35
FOOTNOTES
5
HITCH
NUMBER
1/2”
DRILL BITS
9/16”, 3/4”
WRENCHES
l 37069 GU
FOOTNOTES
STYLE
3/4”
DRILL BITS
n 36025 FP,GU
WRENCHES
10 30
FOOTNOTES
5
HITCH
NUMBER
1/2”
INSTALL TIME
STYLE
3/4”, 7/8”
1/2”
WIRING
7/16", 1/2" 35 n 51009 –
DRILL BITS
WRENCHES
15, 18, 21mm, 9/16",
11/16", 3/4", T50
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 88001 GU
80-86
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
F-100, F-150, F-250,
F-350 All, Inc. SuperCab, Will Not Fit
Custom Fascia
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
155
FORD
FORD
154
REESE TOWPOWER
REESE TOWPOWER
94-96
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 35 n 37096 HX
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
F-150 Flareside (New Body Style)
2004
F-150 Styleside (New Body Style)
BN
–
12 30 74181
78058
BN
–
74181
78058
BN
–
l 51064 Ø,RT,VB
l 37069 VB
n 37096 VB
2004
2005
2005
06-08
DRILL BITS
WRENCHES
10 40
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
10 40
10 40
5
9/16”, 3/4”
1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”
1/4”, 1/2”, 5
9/16”
3/16”,
5
9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
3/4”, 7/8” 1/2”
5
7.5 35
6.5 120
l 37034 GU
l 37094 GU
15/16", 3/4” 5/8”
7
7
12 35
12 35 n 41904 @, GP, HD, 18, 21mm,
10
12 30 74181
10 40
n 44026 GU
3/4”, 7/8”
1/2”
5
10 30 n 96904 @, GP,
10
12 30
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 40
10 30
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
n 36025 –
n 37081 FP,K,M
5
5
8 30
10 45
6
6
5
8 30
10 30
10 30
6
6
6
5
8
8
10
10
30
30
30
30
6
6
6
5
8
8
10
10
30
30
30
30
6
6
6
5
8
8
10
10
30
30
30
30
6
6
8 30
10 20 n 41933 Ø,@,CP,HM, 3/4”, 7/8”
HM,HX
l 33077 Ø,HM,VB
l 37090 Ø,VB
l 44131 Ø,VB
l 51064 Ø,RT
l 37069 VB
n 37096 VB
5
9/16”, 3/4” 1/2”
5
15,17,18, 1/4”, 1/2”, 5
10 30
7.5 45
6.5 50
l
l
l
l
44655
33077
37090
44131
l 51064 Ø,RT,VB
l 37069 VB
n 37096 VB
5
9/16”, 3/4” 1/2”
5
15,17,18, 1/4”, 1/2”, 5
10
7.5 45
6.5 50
l
l
l
l
44655
33077
37090
44131
l 51064 Ø,RT
l 37069 VB
n 37096 VB
5
9/16”, 3/4” 1/2”
5
15,17,18, 1/4”, 1/2”, 5
10 30
7.5 45
6.5 50
l
l
l
l
44655
33077
37090
44131
n 51075 Ø,CP
7/8”
13/16”, 7/8” NO DRILL
6
10 20
l 44655 HM
n 44552 Ø,CP
5
8 20
7/16”
1/2”
15,17,18,
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
7/16”
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
7/16”
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
7/16”
19,21, 22mm, 9/16”
9/16”,3/4”
10
3/4”
10 30
7.5 45
6.5 50
3/4”
9/16”, 3/4”
9/16”
n 36025 FP,GU
5
5
1/4”, 1/2”, 5
n 51096 Ø,CP,HM
06996
OEM REPLACE.
78058
1/2”
FOOTNOTES
74181
3/4”, 9/16”
WT. DISTRIB.
INSTALL TIME
–
–
WT. CARRYING
BN
BN
DRILL BITS
78058
78058
WRENCHES
74181
74181
FOOTNOTES
5 8 30
7.5 12 30
5 7 30
HITCH
NUMBER
1/2”
1/2”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
3/4”
3/4”
n 36025 –
n 36025 FP
n 36047 –
FOOTNOTES
DRILL BITS
–
3/4”, 13/16”,
7/8”
l 37069 GU
94-96
BN
n 41904 @,HD,KF, † 18, 21mm,
n 88001 GU
STANDARD WIRE
APPLICATIONS GUIDE
F-150 Styleside/Flareside, All Models Inc.
SuperCab
78058
1/2”
15/16", 3/4” 5/8”
deep socket
3/4”
1/2”
7/8”
3/4”
7/16”
3/4”
7/16”
3/4”
7/16”
HM,VB
3/4”
7/16”
Ø,HM
3/4”
7/16”
Ø,VB
3/4”
7/16”
Ø
3/4”
7/16”
HM
3/4”
7/16”
Ø,HM,VB
3/4”
7/16”
Ø,VB
3/4”
7/16”
Ø,VB
3/4”
7/16”
HM,VB
3/4”
7/16”
Ø,HM
3/4”
7/16”
Ø,VB
3/4”
7/16”
Ø
3/4”
7/16”
3/4”
7/16”
7/8”
7.5 12 30
KF, †
HD, KF
9/16”
3/4”, 13/16”,
7/8”
18, 21mm, 9/16”
3/4”, 13/16”,
7/8”
†
n 96933 Ø,@,CP,HM 3/4”, 7/8”
BN
74181
78058
BN
–
74682
–
–
–
78063
–
–
–
74682
–
–
–
74682
–
–
85219
–
–
85219
NO DRILL
10
12 20 74682
NO DRILL
10
12 20
JT 2WD models only.
APPLICATIONS GUIDE
94-96
74181
8
74181
n 51017 FT,GP
30
3/4”
7/16", 1/2" 35
n 51016 FT,HM
94-96
T-CONNECTOR
15, 18, 21mm,
9/16", 11/16",
3/4", T50
5
n 36025 –
10 30
10 40
WIRING
1/2”
5
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
94-95
94-96
n 88001 GU
F-150 Lightning Pickup
1/2”
STYLE
F-150 Flareside w/Rear Fascia
3/4”, 7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 51017 FT,GP
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 51009 –
n 51016 FT,HM
1993
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
157
FORD
FORD
156
REESE TOWPOWER
REESE TOWPOWER
5
7.5 25
n 37096 Ø
6.5 40
n 51020 Ø
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 5
n 51095 Ø,FP,GP
3/4”, 7/8”
6
10 20
NO DRILL
10 15
3/4”, 7/8”
NO DRILL
Ø,CP,GP
3/4”, 7/8”
NO DRILL
NO DRILL
12
12
10
12
20
20
20
35
74682
74682
74665
78993
74658
Ø
3/4”
GU
15/16", 3/4” 5/8”
l 37094 Ø
15/16", 3/4” 5/8”
7
12 35
n 44007 Ø
3/4”, 7/8”
5
10 20 n 41920 @,GP,SU, † 3/4”, 13/16”, 1/2”
NO DRILL
n 96920 @,GP,SU
l 44673 Ø,FP,HM
3/4”, 7/8”
NO DRILL
6
10 20
3/4”
NO DRILL
7/8”
3/4”, 13/16”, 1/2”
7/8”
OEM REPLACE.
Package
models only
BN
–
10
13 30 74665
–
BN
–
6
7
10 20
12 25 n 41920 @,GP,SU, † 3/4”, 13/16”, 1/2”
10
74665
13 30 78993
n 37096 Ø
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 5
6.5 40
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25 n 96920 @,GP,SU
10
13 30
10 15
10 20
n 44007 Ø
l 44673 Ø,FP,HM
3/4”, 7/8”
NO DRILL
3/4”, 7/8”
NO DRILL
5
6
10 20
10 20
3/4”, 13/16”, 1/2”
7/8”
FOOTNOTES
85219
85219
BN
85219
Factory Tow 85219
–
–
BN
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
BN
–
–
BN
85219
Factory Tow 85219
Package
models only
74665
n 36099 Ø
3/4”
NO DRILL
6
10 20
l 37069 Ø
9/16”, 3/4”
5
7.5 25
l 37034 GU
l 37094 Ø
15/16", 3/4” 5/8”
7
7
12 25
12 25 n 41920 @,SU, †
n 37096 Ø
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 5
6.5 40
n 44007 Ø
3/4”, 7/8”
NO DRILL
5
10 20 n 96920 @,GP,SU
10 15
10 20
l 44673 Ø,FP,HM
3/4”, 7/8”
NO DRILL
6
10 20
3/4”, 7/8”
1/2”
NO DRILL
6
15/16", 3/4” 5/8”
74665
3/4”, 13/16”, 1/2”
7/8”
3/4”, 13/16”, 1/2”
7/8”
10
13 30 74665
10
13 30
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
n 36099 Ø
3/4”
NO DRILL
6
10 20
–
BN
85219
BN
74665
74665
–
BN
–
74665
–
BN
85219
BN
l 37069 Ø
9/16”, 3/4” 1/2”
5
7.5 25
l 37034 Ø
15/16", 3/4” 5/8”
7
12 25 n 41920 @,SU, †
n 37096 Ø
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 5
6.5 40
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25 n 96920 @,GP,SU
10 15
10 20
n 44007 Ø
l 44673 Ø,FP,HM
3/4”, 7/8”
NO DRILL
3/4”, 7/8”
NO DRILL
5
6
10 20
10 20
74665
74665
74051
–
–
BN
–
–
Ø
3/4”
NO DRILL
–
BN
85219
15/16", 3/4” 5/8”
10
12
12
10
74665
GU
7.5 25
6.5 40
n
l
l
n
10 15
l 44673 Ø,FP,HM
10 20 n 96920 @,GP,SU
3/4”, 7/8”
NO DRILL
6
3/4”, 13/16”, 1/2”
7/8”
3/4”, 13/16”, 1/2”
7/8”
10
13 30
10
13 30
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
l 37069 Ø
n 37096 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
–
–
–
–
74665
74051
7/8”
85219
–
15/16", 3/4” 5/8”
6
–
13 30 74665
n 36099 Ø
l 37034 GU
NO DRILL
–
10
7.5 25
3/4”, 7/8”
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
12 20
Ø,CP,GP
6
6
6
7
n
n
n
l
T-CONNECTOR
WT. CARRYING
10
FOOTNOTES
NO DRILL
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
12 20 74682
5
00-03
06996
10
†
n 96933 Ø,@,CP,HM 3/4”, 7/8”
9/16”, 3/4” 1/2”
n 51020 Ø
n 51095 Ø,FP,GP
n 88001 –
NO DRILL
6
l 37069 Ø
2004
n 88001 –
44645
44645
36099
37034
10 20 n 41933 Ø,@,CP,HM, 3/4”, 7/8”
7/8”
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
2004
n 88001 –
HITCH
NUMBER
DRILL BITS
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
WRENCHES
NO DRILL
8 20
10 15
10 15
9/16”, 3/4” 1/2”
n 51020 Ø
n 51095 Ø,FP,GP
F-150 SuperCrew
3/4”, 7/8”
5
5
5
97-03
n 88001 –
F-150 Light Duty Heritage Styleside (Old
Body Style)
NO DRILL
n 44552 Ø,CP
l 37069 Ø
n 51020 Ø
n 51095 Ø,FP,GP
F-150 Light Duty Heritage Flareside (Old
Body Style)
3/4”, 7/8”
10 20
9/16”, 3/4” 1/2”
5
n 51020 Ø
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 5
n 51095 Ø,FP,GP
3/4”, 7/8”
7/16", 1/2" 35
NO DRILL
6
36099
37034
37094
44007
Ø
15/16", 3/4” 5/8”
Ø
3/4”, 7/8”
NO DRILL
6
7
7
5
3/4”, 7/8”
NO DRILL
6
20
25
25
20 n 41920 @,GP,SU, † 3/4”, 13/16”, 1/2”
7/8”
3/4”, 13/16”, 1/2”
7/8”
74665
10
13 30
10
13 30
BN
10 20
74665
JT 2WD models only.
APPLICATIONS GUIDE
n 88001 –
F-150 Light Duty Styleside
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 51096 Ø,CP,HM
n 51097 Ø,CP,HM
n 51097 Ø,CP,HM
6
DRILL BITS
09-10
09-10
97-03
7/8”
13/16”, 7/8” NO DRILL
WIRING
WRENCHES
F-150 Light Duty Flareside
n 51075 Ø,CP
CLASS V
STYLE
06-08
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
159
FORD
FORD
158
REESE TOWPOWER
REESE TOWPOWER
10 30
3/4”
7/16”
3/4”
7/16”
3/4”
7/16”
5
6
6
10 30
8 30
8 30
2005
7/16”
6
10 30
5
6
6
10 30
8 30
10 20 n 41933 Ø,@,CP,HM, 3/4”, 7/8”
NO DRILL
n 96933 Ø,@,CP,HM 3/4”, 7/8”
NO DRILL
12 20
3/4”
5
10 30
n 37096 VB
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm, 9/16”,3/4” 9/16”
6.5 50
l 37090 Ø
3/4”
3/4”
7/16”
3/4”
7/16”
7/16”
WRENCHES
HITCH
NUMBER
HITCH
NUMBER
WRENCHES
l 51064 Ø,RT
F-150 SuperCrew New Body
Style, w/5.5 & 6.5 ft. Beds
06-08
n 51075 Ø,CP
21mm, 3/4”, 7/8” NO DRILL
6
10 20
l 44131 Ø
l 44655 HM
n 44552 Ø,CP
NO DRILL
09-12
n 51096 Ø,CP,HM
n 51097 Ø,CP,HM
13/16”, 7/8”
Style, w/5.5 & 6.5 ft. Beds
F-250 All Models Inc. SuperCab
3/4”, 7/8”
NO DRILL
5
5
8 20
10 15
n 44645 Ø,CP,GP
3/4”, 7/8”
NO DRILL
6
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
7.5 35
6.5 120
n 36025 FP,GU
l 37034 GU
l 37094 GU
3/4”
l 37069 GU
n 37096 HX
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
10 40
n 44026 GU
3/4”, 7/8”
1/2”
5
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
10 30
92-93
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
n 88001 GU
15, 18, 21mm, 9/16",
11/16", 3/4", T50
9/16”, 3/4”
1/2”
22mm, 9/16”,3/4” 9/16”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
13, 18, 19mm, 3/16”,
5
3/4”, 13/16”, 9/32”, 1/2”,
7/8”
17/32”
3/4”, 7/8” 1/2”
5
7/8”
†
–
85219
10
12 20 74682
–
–
85219
10
12 20
74682
–
–
85219
74181
78058
–
–
6
10 40 n 45002 #,GU,TF
3/4”
12
14 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
n 36025 –
5
8
deep socket
3/4”
1/2”
1/2”
BN
–
BN
–
74181
78058
–
–
74181
78058
–
–
30
7/16", 1/2" 35
74181
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
7/8”
3/4”
1/2”
5
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 35
n 36025 FP,GU
l 37034 GU
l 37094 GU
n 37096 HX
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/4”, 7/8”
1/4”, 1/2”,
9/16”
5
6.5 120
l 37094 GU
15/16", 3/4” 5/8”
7
10 40
n 44026 GU
3/4”, 7/8”
1/2”
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
10 30
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
3/16”, 9/32”, 5
1/2”, 17/32”
3/16”, 9/32”, 5
1/2”, 17/32”
1/2”
5
15/16", 3/4” 5/8”
10 45
10
12 30 74181
12 35 n 96904 @,GP,HD
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
10
12 30
5
10 30 n 45002 #,GU,TF
3/4”
12
14 45
1/2”
6
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
1/2”
74181
BN
–
BN
–
74181
78058
–
–
74181
78058
–
–
30
7/16", 1/2" 35
74181
94-96
n 37081 FP,K,M
F-250 Heavy Duty All Models Inc. SuperCab 1997
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
3/4”, 7/8”
1/2”
5
1/2”
l 37069 GU
9/16”, 3/4”
1/2”
5
7.5 35
n 36025 FP,GU
l 37034 GU
l 37094 GU
n 37096 HX
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/4”, 7/8”
1/4”, 1/2”,
9/16”
5
6.5 120
n 44026 GU
10 40
n 44108 FP,GU,
n 51016 FT,HM
n 51017 FT,GP
n 51009 –
06996
–
12 30 74181
94-96
15, 18, 21mm,
9/16", 11/16",
3/4", T50
74682
10
n 88001 GU
85219
10 30 n 96904 @,GP,HD
n 37081 FP,K,M
–
12 30 74181
92-93
15, 18, 21mm, 9/16",
11/16", 3/4", T50
–
10
n 88001 GU
74682
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
HM,HX
OEM REPLACE.
6
FOOTNOTES
7/16”
STANDARD WIRE
3/4”
30
T-CONNECTOR
l 37090 Ø
WT. DISTRIB.
INSTALL TIME
6.5 50
WT. CARRYING
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm, 9/16”,3/4” 9/16”
DRILL BITS
n 37096 VB
FOOTNOTES
8
l 44131 Ø
l 44655 HM
l 33077 Ø,HM
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
6
DRILL BITS
7/16”
WRENCHES
3/4”
FOOTNOTES
l 33077 Ø,HM
DRILL BITS
10 30
FOOTNOTES
5
HITCH
NUMBER
3/4”
7/16", 1/2" 35
3/16”, 9/32”, 5
1/2”, 17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
10 40
10 30
7/8”
3/4”
1/2”
15/16", 3/4” 5/8”
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
n 36025 –
3/4”
5
10 45
10
12 30 74181
10 30 n 96904 @,GP,HD
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
10
12 30
6
10 40 n 45002 #,GU,TF
3/4”
12
14 45 74181
1/2”
6
10 40
1/2”
5
8
1/2”
BN
–
BN
–
30
74181
JT 2WD models only.
APPLICATIONS GUIDE
l 51064 Ø,RT
7/16”
WIRING
STYLE
2004
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
Style, w/5.5 ft. Bed
YEAR
MODEL
Style, w/5.5 ft. Bed
APPLICATIONS GUIDE
CLASS II
CLASS I
161
FORD
FORD
160
REESE TOWPOWER
REESE TOWPOWER
F-250 Super Duty Pickups Only - Will Not
Fit Cab & Chassis
02-04
05-07
APPLICATIONS GUIDE
15/16", 3/4” 5/8”
6
7
10 20
12 35 n 41920 @,GP,SU, † 3/4”, 13/16”, 1/2”
10
74682
13 30 78993
n 37096 Ø
15,17,18, 1/4”, 1/2”,
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL
5
6.5 40
l 37094 Ø
15/16", 3/4” 5/8”
7
12 35 n 96920 @,GP,SU
10
13 30
NO DRILL
7/8”
n 51020 Ø
n 51095 Ø,FP,GP
10 15
10 20
n 44007 Ø
l 44673 Ø,FP,HM
NO DRILL
NO DRILL
5
6
3/4”, 7/8”
3/4”, 7/8”
3/4”, 7/8”
NO DRILL
5
6
10 20
10 20
l 37069 –
9/16”, 3/4”
1/2”
5
7.5 30
n 33088 Ø
3/4”, 7/8”
NO DRILL
6
8
n 37096 –
5
6.5 40
l 37034 GU
15/16", 3/4” 5/8”
7
n 51068 Ø,HM
15,17,18, 1/4”, 1/2”,
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
–
6
10 20
n 37093 Ø
3/4”
6
n 51095 Ø,FP,GP
3/4”, 7/8”
6
10 20
l 37094 –
15/16", 3/4” 5/8”
7
n 44141 Ø,HM
l 44673 Ø,FP,HM
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
6
6
3/4”, 13/16”, 1/2”
7/8”
–
74051
NO DRILL
NO DRILL
20 n 41922 Ø,@,GP, †
13/16”, 7/8” NO DRILL
10
12 15 74682
12 30 n 96922 Ø,@,GP
13/16”, 7/8” NO DRILL
10
12 15
10 30 n 41931 Ø, @, HM,
3/4”, 7/8”
NO DRILL
12
15 30
3/4”, 7/8”
NO DRILL
12
15 30
3/4”
NO DRILL
21, 24mm
NO DRILL
12
18
14 20
18 50
SH, †
12 30 n 96931 Ø, @,
HM, SH
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
–
–
OEM REPLACE.
STANDARD WIRE
n 36099 Ø
l 37034 GU
FOOTNOTES
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
7.5 25
–
–
–
85219
Factory Tow 85219
Package
models only
–
–
–
78058
–
85219
–
–
–
74051
n 51068 Ø,HM
3/4”
l 37069 –
n 37096 –
9/16”, 3/4” 1/2”
–
6
10 20
n 33088 Ø
3/4”, 7/8”
5
7.5 30
6.5 40
l 37034 GU
n 37093 Ø
3/4”
10 20
l 37094 –
n 44141 Ø,HM
l 44673 Ø,FP,HM
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 6
n 45012 Ø,#,TF
20 n 41922 Ø,@,GP, †
12
10
14 20 74894
12 15
NO DRILL
10
12
12 15
15 30
NO DRILL
12
15 30
3/4”
NO DRILL
21, 24mm
NO DRILL
12
18
14 20
18 50
15/16”
NO DRILL
6
8
7
6
12 30 n 96922 Ø,@,GP
10 30 n 41931 Ø, @, HM,
13/16”, 7/8” NO DRILL
3/4”, 7/8”
15/16", 3/4” 5/8”
7
12 30 n 96931 Ø, @,
3/4”, 7/8”
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
6
6
NO DRILL
15/16", 3/4” 5/8”
NO DRILL
SH, †
HM, SH
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
13/16”, 7/8” NO DRILL
7/16", 1/2" 35
74051
n 45012 Ø,#,TF
20 n 41931 Ø, @, EB,
15/16”
NO DRILL
3/4”, 7/8”
NO DRILL
12
12
14 20
15 30
3/4”, 7/8”
HM, SH
3/4”
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS, EF, 21, 24mm
HM, LT, M, TF
n 41931 Ø, @, EB, HM, 3/4”, 7/8”
SH, †
NO DRILL
12
15 30
NO DRILL
NO DRILL
12
18
14 20
18 50
NO DRILL
12
15 30
NO DRILL
12
15 30
NO DRILL
NO DRILL
12
18
14 20
18 50
NO DRILL
12
15 30
NO DRILL
12
15 30
NO DRILL
12
18
14 20
18 50
n 51068 Ø,EB,HM
3/4”
–
6
10 20
n 33088 Ø,EB
3/4”, 7/8”
NO DRILL
6
8
n 51095 Ø,FP,GP
3/4”, 7/8”
NO DRILL
6
10 20
n 37093 Ø,EB
3/4”
NO DRILL
6
10 30 n 96931 Ø, @, EB,
n 44141 Ø,EB,HM
l 44673 Ø,FP,HM
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
6
6
08-10
HM, SH, †
3/4”, 7/8”
HM, SH
3/4”
n 45008 Ø,#,TF
n 45297 Ø, #, CS, EF, 21, 24mm
HM, LT, M, TF
n 41931 Ø, @, EB, 3/4”, 7/8”
HM, SH, †
11-12
n 96931 Ø, @, EB,
3/4”, 7/8”
HM, SH
3/4”
n 45008 Ø,#,TF
n 45297 Ø, #, CS, EF, 21, 24mm
HM, LT, M, TF
06996
78058
5
n 96931 Ø, @, EB,
Fit Cab & Chassis
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
3/4”
74181
NO DRILL
JT 2WD models only.
APPLICATIONS GUIDE
F-250 Super Duty w/Deep Drop Bumper
Fit Cab & Chassis
10 45
9/16”, 3/4” 1/2”
n 51095 Ø,FP,GP
15, 18, 21mm,
9/16", 11/16",
3/4", T50
5
7/16", 1/2" 35
99-01
02-04
n 88001 –
7/8”
7/16", 1/2" 35
99-01
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WIRING
l 37069 Ø
97-99
n 88001 –
Fit Cab & Chassis
WRENCHES
n 37081 FP,K,M
15, 18, 21mm,
9/16", 11/16",
3/4", T50
CLASS V
1997
n 88001 –
Fit Cab & Chassis
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
F-250 Heavy Duty w/Deep Drop Bumper,
Inc. SuperCab
F-250 Light Duty Styleside
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
163
FORD
FORD
162
REESE TOWPOWER
REESE TOWPOWER
10 30
10 40
n 51009 –
n 51016 FT,HM
15, 18, 21mm,
9/16", 11/16",
3/4", T50
DRILL BITS
HITCH
NUMBER
10
12 30 74181
10 30 n 96904 @,GP,HD
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
10
12 30
6
10 40 n 45002 #,GU,TF
3/4”
12
14 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
1/2”
7/16", 1/2" 35
n 37081 FP,K,M
94-96
7.5 35
n 36025 FP,GU
l 37034 GU
l 37094 GU
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
1/4”, 1/2”, 5
9/16”
6.5 120
n 44026 GU
3/4”, 7/8”
1/2”
5
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
10 30
10 40
l 37069 GU
9/16”, 3/4” 1/2”
n 37096 HX
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/4”, 7/8”
n 51017 FT,GP
n 51009 –
n 51016 FT,HM
5
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
7/8”
3/4”
1/2”
15/16", 3/4” 5/8”
5
10 45
–
–
6
10 40 n 45002 #,GU,TF
3/4”
12
14 45
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 40
n 36025 –
5
8
HM,HX
deep socket
3/4”
1/2”
1/2”
BN
30
74181
7.5 35
15/16", 3/4” 5/8”
1/4”, 1/2”, 5
9/16”
6.5 120
n 44026 GU
3/4”, 7/8”
1/2”
5
3/16”, 9/32”, 5
1/2”, 17/32”
1/2”
5
10 40
n 44108 FP,GU,
1/2”
l 37069 GU
9/16”, 3/4” 1/2”
n 37096 HX
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”, 7/8”
3/4”, 7/8”
n 51017 FT,GP
n 51009 –
n 51016 FT,HM
5
13, 18, 19mm, 3/16”, 9/32”, 5
3/4”, 13/16” 1/2”, 17/32”
10 30
10 40
7/8”
3/4”
1/2”
15/16", 3/4” 5/8”
18mm, 3/4”
HM,HX
deep socket
n 44109 FP,GP, GU,HX 18mm, 3/4”
deep socket
3/4”
n 36025 –
5
10 45
74181
78058
–
–
74181
78058
–
–
10
12 30 74181
10 30 n 96904 @,GP,HD
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
10
12 30 74181
6
10 40 n 45002 #,GU,TF
3/4”
12
14 45
1/2”
6
10 40
1/2”
5
8
1/2”
BN
30
7/16", 1/2" 35
74181
1997
n 51068 Ø,HM
3/4”
l 37069 –
l 37069 –
n 37096 –
n 51095 Ø,FP,GP
06996
78058
12 30
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
74181
10
n 36025 FP,GU
l 37034 GU
l 37094 GU
n 88001 –
–
10 30 n 96904 @,GP,HD
7/16", 1/2" 35
99-01
–
12 30 74181
F-350 Heavy Duty All Models Inc. SuperCab 1997
F-350 Heavy Duty w/Deep Drop Bumper,
Inc. SuperCab
Fit Cab & Chassis
78058
10
n 37081 FP,K,M
15, 18, 21mm,
9/16", 11/16",
3/4", T50
74181
13/16”, 7/8”
18, 21mm, 3/4”, 9/16”
13/16”, 7/8”
94-96
n 88001 GU
BN
74181
92-93
15, 18, 21mm,
9/16", 11/16",
3/4", T50
–
30
n 88001 GU
–
7/16", 1/2" 35
n 37081 FP,K,M
7/8”
5
10 45
6
8
20 n 41922 Ø,@,GP, †
13/16”, 7/8” NO DRILL
10
12 15
7
6
12 30 n 96922 Ø,@,GP
10 30 n 41931 Ø, @, HM,
13/16”, 7/8” NO DRILL
3/4”, 7/8”
NO DRILL
10
12
12 15
15 30
–
6
10 20
n 33088 Ø
3/4”, 7/8”
9/16”, 3/4”
1/2”
9/16”, 3/4”
1/2”
5
5
7.5 30
7.5 30
l 37034 GU
n 37093 Ø
3/4”
5
6.5 40
l 37094 –
15/16", 3/4” 5/8”
7
12 30 n 96931 Ø, @,
3/4”, 7/8”
NO DRILL
12
15 30
6
10 20
n 44141 Ø,HM
l 44673 Ø,FP,HM
3/4”
NO DRILL
NO DRILL
6
6
3/4”
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS, EF, HM, 21, 24mm
NO DRILL
3/4”, 7/8”
12
18
14 20
18 50
15,17,18, 1/4”, 1/2”,
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL
NO DRILL
15/16", 3/4” 5/8”
NO DRILL
SH, †
HM, SH
LT, M, TF
NO DRILL
–
–
–
74051
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 GU
13, 18, 19mm, 3/16”,
5
3/4”, 13/16” 9/32”, 1/2”,
17/32”
78058
OEM REPLACE.
1/2”
74181
FOOTNOTES
18mm, 3/4”
deep socket
STANDARD WIRE
n 44108 FP,GU,
3/16”,
5
9/32”, 1/2”,
17/32”
1/2”
5
T-CONNECTOR
10 40
n 51017 FT,GP
WT. DISTRIB.
INSTALL TIME
5
1/2”
WT. CARRYING
1/2”
DRILL BITS
3/4”, 7/8”
WRENCHES
n 44026 GU
FOOTNOTES
6.5 120
15/16", 3/4” 5/8”
7.5 12 30
7 12 35
7 12 35 n 41904 @,GP,HD, † 18, 21mm, 3/4”, 9/16”
3/4”
15/16", 3/4” 5/8”
WIRING
HITCH
NUMBER
5
DRILL BITS
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
3/4”, 7/8”
WRENCHES
STYLE
n 37096 HX
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
7.5 35
WRENCHES
5
FOOTNOTES
9/16”, 3/4” 1/2”
HITCH
NUMBER
l 37069 GU
n 36025 FP,GU
l 37034 GU
l 37094 GU
92-93
1/4”, 1/2”,
9/16”
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
CLASS II
CLASS I
165
FORD
FORD
164
REESE TOWPOWER
REESE TOWPOWER
APPLICATIONS GUIDE
Fit Cab & Chassis
02-04
05-07
NO DRILL
12
15 30
3/4”
NO DRILL
21, 24mm
NO DRILL
12
18
14 20 –
18 50
13/16”, 7/8” NO DRILL
3/4”, 7/8”
15/16", 3/4” 5/8”
7
12 30 n 96931 Ø, @,
3/4”, 7/8”
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
6
6
SH, †
HM, SH
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
74051
n 45012 Ø,#,TF
20 n 41931 Ø, @, EB,
n 51068 Ø,EB,HM
3/4”
–
6
10 20
n 33088 Ø,EB
3/4”, 7/8”
NO DRILL
6
8
n 51095 Ø,FP,GP
3/4”, 7/8”
NO DRILL
6
10 20
n 37093 Ø,EB
3/4”
NO DRILL
6
10 30 n 96931 Ø, @, EB,
n 44141 Ø,EB,HM
l 44673 Ø,FP,HM
3/4”
NO DRILL
3/4”, 7/8”
NO DRILL
6
6
08-10
HM, SH, †
HM, SH
10 20 n 45008 Ø,#,TF
10 20 n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
n 41931 Ø, @, EB,
HM, SH, †
HM, SH
n 45008 Ø,#,TF
n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
n 41931 Ø, @, EB,
HM, SH, †
11-12
15/16”
NO DRILL
3/4”, 7/8”
NO DRILL
12
12
14 20
15 30
3/4”, 7/8”
NO DRILL
12
15 30
3/4”
NO DRILL
21, 24mm
NO DRILL
12
18
14 20
18 50
3/4”, 7/8”
NO DRILL
12
15 30
3/4”, 7/8”
NO DRILL
12
15 30
3/4”
NO DRILL
21, 24mm
NO DRILL
12
18
14 20
18 50
3/4”, 7/8”
NO DRILL
12
15 30
NO DRILL
12
15 30
NO DRILL
NO DRILL
12
18
14 20
18 50
1/2”, 9/16”
12
15 40
21, 22mm, 1/2”, 9/16”
13/16”, 7/8”
13/16”, 7/8” 9/16”
12
15 40
9/16”
12
12
15
15 40
15 40
16 35
9/16”
15
16 35 –
–
–
–
1/2”, 9/16” 16
16 40 –
–
–
–
3/4”, 5/8”
12
14 60 –
–
–
–
11/16”
15
16 35
–
–
–
n 96931 Ø, @, EB,
F-350 Super Duty Cab & Chassis w/34
Wide Frames
99-00
3/4”, 7/8”
HM, SH
3/4”
n 45008 Ø,#,TF
n 45297 Ø, #, CS, EF, HM, 21, 24mm
LT, M, TF
10 45 n 41927 @,SP, † 21, 22mm,
13/16”, 7/8”
n 37087 FP
15/16”, 3/4” 5/8”
6
n 37088 –
15/16”, 3/4” 5/8”
7.5 12 60 n 96927 @,SP, †
n 41938 @,CC, †
n 96938 @,CC
n 41940 @
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
F-350 Super Duty Cab & Chassis w/34 Wide 99-00
Frames & w/Deep Drop Bumper
01-04
Wide Frames
n 37081 FP,M
7/8”
5
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
n 41927 @,SP, †
21, 22mm, 1/2”, 9/16”
13/16”, 7/8”
12
15 40
n 96927 @,SP, †
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35 –
n 96940 @
n 96943 @
n 96947 @
13/16”, 7/8” 9/16”
10 45
n 41940 @
06996
OEM REPLACE.
12 15
15 30
12 30 n 96922 Ø,@,GP
10 30 n 41931 Ø, @, HM,
NO DRILL
13/16”, 7/8” NO DRILL
FOOTNOTES
10
12
7
6
15/16", 3/4” 5/8”
n 96931 Ø, @, EB,
Fit Cab & Chassis
NO DRILL
8
STANDARD WIRE
n 44141 Ø,HM
l 44673 Ø,FP,HM
14 20
12 15
NO DRILL
6
NO DRILL
T-CONNECTOR
l 37094 –
WT. DISTRIB.
INSTALL TIME
10 20
12
10
15/16”
DRILL BITS
3/4”
n 45012 Ø,#,TF
20 n 41922 Ø,@,GP, †
WRENCHES
l 37034 GU
n 37093 Ø
FOOTNOTES
7.5 30
6.5 40
HITCH
NUMBER
5
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”, 7/8” NO DRILL 6
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
3/4”, 7/8”
DRILL BITS
n 33088 Ø
WRENCHES
10 20
FOOTNOTES
6
WT. CARRYING
9/16”, 3/4” 1/2”
STYLE
l 37069 –
n 37096 –
–
WIRING
1/2”, 9/16” 16
11/16”
15
16 40
16 35 –
–
JT 2WD models only.
APPLICATIONS GUIDE
Fit Cab & Chassis
DRILL BITS
3/4”
n 51095 Ø,FP,GP
n 88001 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 51068 Ø,HM
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
99-01
02-04
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Fit Cab & Chassis
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
167
FORD
FORD
166
REESE TOWPOWER
REESE TOWPOWER
12
15 40
9/16”
15
16 35
1/2”, 9/16” 16
16 40
n 41940 @, †
n 96943 @
n 96947 @
Wide Frames
n 41927 @,SP, †
08-12
n 96927 @,SP, †
n 41940 @, †
n 96943 @
n 96947 @
F-450 Super Duty Pickups Only - Will Not Fit
Cab & Chassis
08-10
Fit Cab & Chassis
11-12
Wide Frames
99-04
n 45297 Ø, #, CS,
n 37088 –
15/16”, 3/4” 5/8”
EF, HM, LT,
M, TF
n 45297 Ø, #, CS,
EF, HM, LT,
M, TF
7.5 12 60 n 41927 @,SP, †
n 96927 @,SP, †
n 41940 @, †
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
Wide Frames
n 37088 –
05-07
15/16”, 3/4” 5/8”
7.5 12 60 n 41927 @,SP, †
n 96927 @,SP, †
n 41940 @
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
Wide Frames
n 37088 –
08-12
15/16”, 3/4” 5/8”
7.5 12 60 n 41927 @,SP, †
n 96927 @,SP, †
n 41940 @
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
06996
15
16 35 –
1/2”, 9/16”
12
15 40
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35 –
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
21, 24mm
11/16”
15
16 35 –
NO DRILL
18
18 50
21, 24mm
NO DRILL
18
18 50
21, 22mm, 1/2”, 9/16”
13/16”, 7/8”
12
15 40
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
1/2”, 9/16” 16
1/2”, 9/16” 16
16 40 –
12
14 60
11/16”
15
16 35
1/2”, 9/16”
12
15 40
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35
16 40 –
3/4”, 5/8”
12
14 60
11/16”
15
16 35
1/2”, 9/16”
12
15 40
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35
1/2”, 9/16” 16
–
–
–
16 40
3/4”, 5/8”
1/2”, 9/16” 16
–
16 40 –
3/4”, 5/8”
12
14 60
11/16”
15
16 35
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 96940 @
11/16”
OEM REPLACE.
1/2”, 9/16”
FOOTNOTES
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
STANDARD WIRE
n 96927 @,SP, †
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
15 40
DRILL BITS
12
WRENCHES
21, 22mm, 1/2”, 9/16”
13/16”, 7/8”
FOOTNOTES
n 41927 @,SP, †
HITCH
NUMBER
WT. CARRYING
05-07
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Wide Frames
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
169
FORD
FORD
168
REESE TOWPOWER
REESE TOWPOWER
n 41940 @, †
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
Wide Frames
n 37088 –
05-07
15/16”, 3/4” 5/8”
7.5 12 60 n 41927 @,SP, †
n 41940 @, †
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
Wide Frames
n 37088 –
08-12
15/16”, 3/4” 5/8”
7.5 12 60 n 41927 @,SP, †
n 96927 @,SP, †
n 41940 @, †
n 96940 @
n 96943 @
n 45014 #,TF
n 96947 @
Fiesta 4 Dr. Sedan
Fiesta 5 Dr. Hatchback
11-13
11-13
Five Hundred
05-07
5/8”, 11/16”
n 77229 Ø,HM
n 77228 Ø,HM,JR,KH 10mm, 3/4”,
NO DRILL
NO DRILL
11/16”
15
30
n 06301 Ø,GP,JR
n 51179 Ø,GP,JR
10, 13, 15mm,
3/4”
10, 13, 15mm,
3/4”
NO DRILL
30
NO DRILL
30
Focus Sedan, Except w/Street Appearance
Pkg.
05-07
Focus
Focus
Focus
Focus
Focus
Focus
08-11
08-11
12-13
12-13
00-03
03-07
n
n
n
n
n
n
n
Focus Sedan
Coupe
Sedan
Sedan
5 Dr. Hatchback, Except ST
Wagon Built Before 11/1/02
Wagon Built After 11/1/02
01-04
51161
77176
77176
77256
77256
77115
77115
06996
3/4”, 7/8”
1/2”
1/2”
Ø,HM
3/4”, 7/8”
1/2”
Ø,HM
3/4”, 7/8”
1/2”
Ø,HM
3/4”, 7/8”
1/2”
Ø,HM
3/4”, 7/8”
1/2”
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,GP,JR,KH
13mm, 11/16”
NO DRILL
Ø,GP,JR,KH
13mm, 11/16”
NO DRILL
Ø,JR
7/8”
NO DRILL
Ø,JR
7/8”
NO DRILL
16 35
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
1/2”, 9/16” 16
16 40 –
3/4”, 5/8”
12
14 60
11/16”
15
16 35
1/2”, 9/16”
12
15 40
1/2”, 9/16”
12
15 40
9/16”
15
16 35
9/16”
15
16 35
1/2”, 9/16” 16
16 40 –
OEM REPLACE.
15
FOOTNOTES
9/16”
STANDARD WIRE
16 35
T-CONNECTOR
15
DRILL BITS
9/16”
–
–
–
–
–
–
3/4”, 5/8”
12
14 60
11/16”
15
16 35
1/2”, 9/16”
12
15 40
1/2”, 9/16”
12
15 40
9/16”
15
16 35 –
–
–
–
9/16”
15
16 35 –
–
–
–
1/2”, 9/16” 16
16 40
3/4”, 5/8”
12
14 60
11/16”
15
16 35 –
–
74699
78095
78104
78104
CH
–
–
CH
78058
–
–
18, 19mm, 6” NO DRILL
ratchet
18, 19mm NO DRILL
4
4
30
78087
78058
–
–
4
4
20
78087
78058
–
–
–
78013
–
–
l 44620 Ø,†,HM,JR
3/4”, 7/8”
15 40
78032
09-13
Ø,HM
12
30
Flex Models w/Single Muffler & Dual Tail
Pipes On Drivers Side Only
Focus Sedan
Ø,HM
1/2”, 9/16”
3.5 4
l 44636 Ø,HM,JR
77114
51161
77114
51161
77114
21, 22mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
15/16”,
1-1/8”
21, 24mm,
13/16”, 7/8”
21, 22mm,
13/16”, 7/8”
3/4”
09-13
n
n
n
n
n
15 40
n 44525 Ø,JR
Flex All, Inc. EcoBoost
2000
12
20
20
20
20
20
–
78104
–
–
–
78058
–
–
20
30
30
25
25
20
20
78019
78019
85771
85772
74665
–
78058
78058
78104
–
–
–
–
–
–
CH
78058
78058
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 96927 @,SP, †
WT. DISTRIB.
INSTALL TIME
n 96927 @,SP, †
21, 22mm, 1/2”, 9/16”
13/16”, 7/8”
WRENCHES
FOOTNOTES
HITCH
NUMBER
7.5 12 60 n 41927 @,SP, †
WT. CARRYING
15/16”, 3/4” 5/8”
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 37088 –
99-04
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Wide Frames
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
171
FORD
FORD
170
REESE TOWPOWER
REESE TOWPOWER
Focus ZX5 5 Dr. Hatchback, Except SVT 02-07
& w/Street Appearance Pkg.
Freestar
Freestyle
n 77114 HM
3/4”, 7/8”
n 51161 HM
n 77114 HM
n 51161 HM
3/4”, 7/8”
APPLICATIONS GUIDE
LTD Crown Victoria
83-91
92-97
98-09
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
–
–
–
–
–
–
–
–
74699
74699
78104
78104
–
–
–
–
–
78058
–
–
n 77002 CA
3/4”
1/2”
3/4”
3/4”
1/2”
1/2”
n
25 n
n
25 n
n
25 n
n
25 n
n 77002 CA
LTD, Custom & Galaxie Sedan
LTD, Custom & Galaxie Wagon
Mustang All Models
Mustang All, Except GT
Mustang All Models
79-82
79-82
79-86
87-93
94-98
n
n
n
n
n
Mustang All, Except Cobra SVT
99-04
n 77029 RB
Mustang All, Except GT/CS California
Special, Shelby GT & GT500
Mustang All, Except GT/CS California
Special, Shelby GT & GT500
Mustang All V6 Models
Mustang All V8 Models, Including GT/CS
California Special, Shelby GT & GT500
Probe All, Except GT
Ranger Pickup All, Except GT
05-09
n 77242 GP,JR
1” hole saw
13, 15mm, 11/16” 1/4”, 7/16”, 20
1” hole saw
13mm, 11/16” 3/8”
45
2010
n 77243 GP,JR,X
13mm, 11/16”
11-13
11-13
n 77238 Ø,HM,JR
n 77238 Ø,GP,HB,JR
7/8”
NO DRILL
10, 13, 15mm,
3/4”
10, 13, 15mm,
3/4”
NO DRILL
25
30
NO DRILL
30
3/4”
1/2”
88002
06043
88002
06043
88002
06043
88002
06043
n 44129 GP,JR
n 44525 Ø,JR
1/2”
30
35
30 n 51103 CA,GP
35
30 n 51103 CA,GP
35
30 n 51103 CA,GP
35
30
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
n 88002 –
25 n 06043 CA
3/4”
1/2”
25 n 06043 CA
9/16”, 5/8”, 11/16" 3/8”
20
9/16”, 5/8”, 11/16" 3/8”
20
13, 15mm, 11/16” 1/4”, 7/16”, 20
3/4”
13mm, 3/4”
1/2”
3/4”
1/2”
13mm, 3/4”
1/2”
13mm, 3/4”
1/2”
35
30 n 51103 CA,GP
30
3/4”
1/2”
3/4”
7/8”
3.5 5
3.5 4
5
30
30
10 45
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78058
–
–
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
74428
78104
–
–
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
–
–
78058
–
–
–
–
–
–
74428
78058
78058
78058
78058
78058
–
–
–
–
–
–
–
74428
78058
–
–
–
78058
–
–
13mm, 3/4” 1/2”
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
–
–
3/8”
45
85706
78104
–
–
13mm, 11/16”
NO DRILL
NO DRILL
40
40
85706
85706
78104
78104
CH
13mm, 11/16”
CH
–
–
–
–
78058
78058
–
–
–
74426
78058
–
–
78058
A
–
93-97
83-85
n 51032 EG,V
n 37152 Ø
83-85
n 37042 Ø
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18,19mm,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/2”
3.5 5 20
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 33058 EG,SD,V
18, 19mm, 7/8” 1/2”
4
6
20
n 44101 EG
18,19mm,
3/4”, 7/8”
3.5 5
20
1/2”
7/16", 1/2" 35
B,F
74051
n 51032 EG,V
06996
T-CONNECTOR
–
78058
25 n 06043 CA
86-92
WT. DISTRIB.
INSTALL TIME
78022
79032
1/2”
RB
WT. CARRYING
20
n 77002 CA
X
DRILL BITS
1/2”
7mm, 10mm,
11/16”, Phillips
Screw Driver
3/4”
X
WRENCHES
–
45
20
20
CA
FOOTNOTES
–
1/2”
CA
HITCH
NUMBER
78058
NO DRILL
77002
77002
77060
77060
77029
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
–
12, 13mm, 3/4”
n 77002 CA
DRILL BITS
20
20
11/16”
n 77002 CA
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/2”
1/2”
83-91
Ranger Pickup All, Except GT
WRENCHES
FOOTNOTES
3/4”, 7/8”
3/4”, 7/8”
LTD Crown Victoria Wagon
Full Size
Ranger Pickup All, Except w/Rear Fascia
HITCH
NUMBER
–
n 37081 FP,K,M
83-91
LTD Crown Victoria
INSTALL TIME
STYLE
–
89-97
LTD Country Squire
Wagon Full Size
LTD Crown Victoria
DRILL BITS
78058
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 EG,SD,V
18, 19mm, 7/8” 1/2”
4
6
20
n 44101 EG
18,19mm,
3/4”, 7/8”
3.5 5
20
1/2”
74179
JT 2WD models only.
APPLICATIONS GUIDE
–
n 06989 Ø,JR
n 06301 Ø,GP,JR
n 77152 GP,JR,TA
n 77239 Ø,GP,JR
n 77285 Ø,HM,SV
WIRING
20
04-07
05-07
06-09
10-12
2013
CLASS V
1/2”
n 51179 Ø,GP,JR
F-Series Super Duty Cab & Chassis w/34
Wide Frames & 161 Wheelbase & w/Deep Drop Bumper
Fusion
Fusion
Fusion
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Focus ZX3 3 Dr. Hatchback, Except SVT 00-07
& w/Street Appearance Pkg.
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
173
FORD
FORD
172
REESE TOWPOWER
REESE TOWPOWER
Ranger Pickup
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 35 n 37152 Ø
n 51032 V
1998
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 EG,SD,V
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18,19mm,
3/4”, 7/8”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
1/2”
3.5 5 20
n 33058 SD,V
n 44101 –
Ranger Pickup All, Except Flareside or w/
Rear Fascia
n 37152 Ø
98-99
n 37042 Ø
n 88001 –
Ranger Pickup
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 51032 V
–
–
74424
78013
–
–
74424
78013
–
–
OEM REPLACE.
78013
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
74424
1/2”
4
6
20
1/2”
3.5 5
20
3.5 5 20
n 33058 SD,V
–
A
–
–
78104
C
–
35
20
74429
78058
A
–
35
20
74657
78013
B
–
35
20
85243
78013
B
–
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 SD,V
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
4
6
20
1/2”
3.5 5
20
1/2”
4
6
20
1/2”
3.5 5
20
HG
–
74665
n 37042 Ø
Taurus Sedan, All Models
86-91
n 77017 Ø,JR,KH
10, 13, 15mm,
3/4”
NO DRILL
20 n 06368 Ø,GP,JR,KH
15, 18, 21mm, 7/16", 1/2" 35
9/16", 11/16",
3/4", T50
10, 13, 15mm, 3/4” NO DRILL 20
Taurus Sedan,Except SHO
Taurus Sedan, Inc. SHO
86-91
92-95
n 77017 Ø,JR
10, 13, 15mm,
3/4”
NO DRILL
n 88002 –
20 n 06368 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Taurus Sedan, Except SHO
Taurus Sedan, Except SHO
92-95
96-99
n 77017 Ø,JR
10, 13, 15mm,
3/4”
NO DRILL
n 88002 –
20 n 06368 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Taurus SHO
96-99
n 88002 –
n 06368 Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
1/2”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
20
A
n 37152 Ø
06996
3.5 5
–
04-11
3/4”
–
74665
n 51032 V
1/2”
–
–
04-11
3/4”
1/2”
7/16", 1/2" 35
1/2”
78013
A
n 37152 Ø
3/4”
74424
–
00-03
n 88001 –
20
74665
1/2”
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 SD,V
n 44101 –
Rear Fascia
6
–
n 37042 Ø
Ranger Pickup
4
–
n 51032 V
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
78013
00-03
n 88001 –
–
74424
18,19mm,
3/4”, 7/8”
n 44101 –
Rear Fascia
A
74424
n 44101 –
Ranger Pickup
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
7/16", 1/2" 35
1999
78058
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
4
6
20
1/2”
3.5 5
20
74665
74051
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 37042 Ø
Ranger Pickup
74179
74179
n 51032 EG,V
93-97
93-97
DRILL BITS
7/16", 1/2" 35
n 44101 EG
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/4”, 1/2”, 5
9/16”
STANDARD WIRE
n 88001 –
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
WIRING
T-CONNECTOR
n 37042 Ø
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 37152 Ø
86-92
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
175
FORD
FORD
174
REESE TOWPOWER
CLASS II
NO DRILL
n 44632 GP,JR
18mm, 3/4”, 1/2”
7/8”
4
30
85711
78104
B
–
–
78104
C
–
–
78058
A
–
–
78013
B
–
–
–
C
–
–
–
A
–
78068
78058
A
–
10-13
n 51179 Ø,GP,JR
n 06121 GP,JR
Taurus Wagon
86-91
Taurus Wagon
Taurus Wagon
Taurus Wagon
92-95
96-99
00-03
n 77017 Ø,JR,KH
n 77017 Ø,JR
n 77017 Ø,JR
n 77017 Ø,JR
04-06
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
20 n
n
20 n
n
20 n
n
20 n
n
n
n
n
n
06368
88002
06368
88002
06368
88002
06368
06991
51101
06991
51101
06301
Ø,GP,JR,KH
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Taurus X
08-09
Thunderbird All, Except SC
89-95
n 51179 Ø,GP,JR
n 06004 Ø
Thunderbird
96-97
n 06004 Ø
Transit Connect
Windstar
10-12
95-98
n 06967 –
Windstar Built Before 11/2002
99-03
n 06967 –
20
35
20
35
20
40
20
40
40
40
40
30
n 44525 Ø,JR
Windstar Built After 11/2002
n 06967 –
2003
FREIGHTLINER
Sprinter All 41 Wide Frames, Except 118
Wheelbase & Factory Metal Step Platform
Sprinter 144 & 170 Wheelbase Models Only, Except w/Factory Step Bumper
3.5 4
30
30
40
–
78104
A,F
–
NO DRILL
40
–
78104
A,F
–
85707
78104
B,E
–
7/8”
1/2”
30 n 51027 –
3/4”
7/8”
1/2”
30 n 51027 –
n 37152 Ø,AF
3/4”
74226
–
G,MX
–
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/8”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/2”
3.5 4 40
3.5 4 40
15,17,18, 19,21, 1/4”, 1/2”, 5 6
1/2”
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
l
n
n
n
n
44634
33012
44097
33012
44097
Ø
18mm
NO DRILL
–
7/8”
1/2”
–
3/4”
1/2”
–
7/8”
1/2”
–
3/4”
1/2”
3.5
3.5
3.5
3.5
3.5
4
5
4
5
4
20
45
45
45
45
6.5 40
7/16", 1/2" 40
1/2”
74226
30 n 51027 –
n 37152 Ø,AF
n 37042 Ø,AF
n 88001 –
3/4”
4
NO DRILL
10, 13, 15mm, 3/4” NO DRILL
13mm, 11/16”,
3/4”, 7/8”
13mm, 11/16”,
3/4”, 7/8”
n 37042 Ø,AF
n 88001 –
HITCH
NUMBER
WRENCHES
10, 13, 15mm, 3/4” NO DRILL
18mm, 3/4”, 7/8” 1/2”
OEM REPLACE.
30
30
Taurus Sedan, Inc. SHO
FOOTNOTES
–
WT. DISTRIB.
INSTALL TIME
A
WT. CARRYING
78058
DRILL BITS
78069
WRENCHES
30
FOOTNOTES
3.5 4
HITCH
NUMBER
3/4”
10, 13, 15mm, 3/4” NO DRILL
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
n 44525 Ø,JR
Ø,GP,JR
DRILL BITS
–
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
WRENCHES
A
Ø,GP,JR
Ø,GP,JR
FOOTNOTES
78058
08-09
04-06
STYLE
–
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
40
40
40
40
30
DRILL BITS
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
WRENCHES
Ø,GP,JR
Ø,GP,JR
n
n
n
n
n
FOOTNOTES
–
INSTALL TIME
STYLE
A
DRILL BITS
78013
FOOTNOTES
85243
HITCH
NUMBER
IONSTALL TIME
STYLE
20
3.5 4 40
6
3/4”
1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
1/4”, 1/2”, 5
9/16”
n 33012 –
7/8”
1/2”
3.5 5
45
n 44097 –
3/4”
1/2”
3.5 4
45
85290
FW,LS
–
G,MX
–
6.5 40
7/16", 1/2" 40
85290
FW,LS
03-06
n 33089 Ø
18mm, 3/4”
NO DRILL
5
7.5 20
–
78104
B,F
–
2007
n 44576 Ø,HM
18, 19mm
NO DRILL
6
7.5 20
–
78013
B
–
2007
08-09
n 44591 Ø,HM
n 44576 Ø,HM
18, 19mm
NO DRILL
NO DRILL
5
6
7.5 30
7.5 20
–
–
78013
78013
B
18, 19mm
B
–
–
08-09
10-12
n 44591 Ø,HM
n 44576 Ø,HM
18, 19mm
NO DRILL
7.5 30
7.5 20
78013
B
–
NO DRILL
5
6
–
18, 19mm
06996
JT 2WD models only.
177
APPLICATIONS GUIDE
10, 13, 15mm, 3/4” NO DRILL
20 n 06368 Ø,GP,JR
06991
51101
06991
51101
06301
WIRING
STANDARD WIRE
10, 13, 15mm,
3/4”
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77017 Ø,JR
CLASS V
T-CONNECTOR
00-03
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS I
Taurus Wagon
APPLICATIONS GUIDE
REESE TOWPOWER
FORD - FREIGHTLINER
FORD - FREIGHTLINER
176
REESE TOWPOWER
n 77005 –
Tracker 2 & 4 Dr.
Tracker 2 & 4 Dr.
89-95
96-97
n 77015 Ø,HM
n 77015 Ø,HM
Acadia
Acadia w/ Tow Package
Caballero
07-12
07-12
78-87
Canyon All Models
04-07
n 51074 Ø,GP
21, 22mm,
11/16”
NO DRILL
6
7.5 25
n 44593 Ø,GP
21, 22mm,
11/16”
NO DRILL
6
Canyon All Models
08-12
n 51074 Ø,CP,GP
21, 22mm,
11/16”
NO DRILL
6
7.5 25
n 44593 Ø,CP,GP
21, 22mm,
11/16”
NO DRILL
Envoy
1998
NO DRILL
4
6 15
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
n 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
n 51031 Ø, FP, HM, KK 18mm,
5
5
4
14mm, 18, 19mm NO DRILL
–
–
78009
74682
–
78058
85262
78058
A
85262
–
–
7.5 25
78001
78013
B
85262
7.5 25
74682
78001
78013
78013
BO
6
B
85262
85262
l 33015 Ø,FP,KK,SD 18mm, 7/8” NO DRILL
4
6
15
74682
–
78013
85217
A
85262
–
6 30
6 30
6 15
n 44098 Ø, FP, HM, KK 18mm, 1-1/8” NO DRILL
4
4
6
6
20
20
4
6 15
4
6
15
–
–
A
–
5
5
4
6 30
6 30
6 15
4
4
6
6
20
20
7.5
7.5
7.5
10
7
30
30
30
30
30
74425
74425
74178
78180
78058
78058
78058
78058
A
A
–
–
–
–
7.5 30
–
85217
A
–
–
85217
A
–
–
85217
A
–
n 06955 Ø,FP,GP,KK
9/16”, 11/16”,
7/8”
18mm, 7/8”
3/8”
NO DRILL
18mm, 7/8”
NO DRILL
5
5 25
n 88001 –
n 06955 Ø,GP
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18mm, 7/8”
15 n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
15 n 51031 Ø, FP, HM, KK 18mm,
NO DRILL
1-1/8”
18mm, 3/4” 1/2”
18mm, 7/8”
18mm, 7/8”
5
33042
33042
33042
37074
44096
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
7/8”
1/4”, 1/2”, 5
9/16”
6
HM
7/8”
5
5
1/2”
5
1/2”, 9/16” 6
1/2”, 9/16” 5
1/4”, 1/2”, 5
9/16”
6.5 30
n 44656 HM
7/8”
1/2”, 9/16” 5
1/2”, 9/16” 5
7/8”
1/2”, 9/16” 5
7 30
7 30
5
25
–
3/4”, 7/8”
–
3/4”, 7/8”
–
3/4”, 7/8”
HM
7/8”
1/2”
1/2”
NO DRILL
NO DRILL
NO DRILL
A,N
–
BO
A
A
74180
15 n 51031 Ø,HM
18mm,
1-1/8”
3/4”
NO DRILL
4
6 15
l 33015 Ø,SD
18mm, 7/8”
1/2”
3/4”
1/2”
5
5
4
6 30
6 30
6 15
n 33021 Ø
n 44098 Ø,HM
4
18mm,
NO DRILL
1-1/8”
NO DRILL
15 n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
n 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
1-1/8”
NO DRILL
15 n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
n 37041 FP,JT,KK 18mm, 3/4” 1/2”
n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
06996
NO DRILL
n
n
n
n
n
n 51031 Ø, FP, HM, KK 18mm,
n 06955 Ø,FP,GP,KK
18mm, 3/4”
7/16", 1/2" 30
l 37051 JT
n 37041 JT
n 51031 Ø,HM
n 06955 Ø,FP,GP,KK
l 44569 Ø,GP,JR
30
73-75
76-84
85-91
92-94
99-01
OEM REPLACE.
B
B
n 51012
n 51012 HM
Jimmy Downsize, All Models
FOOTNOTES
78013
78013
n 06955 Ø,FP,GP,KK
1998
STANDARD WIRE
–
74896
n 37042 –
T-CONNECTOR
20
20
n 06407 –
95-97
WT. DISTRIB.
INSTALL TIME
–
n 37152 –
WT. CARRYING
B
1-1/8”
Full Size
Full Size
Full Size
Full Size
DRILL BITS
78013
l 37051 FP,JT,KK
n 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
n 51031 Ø, FP, HM, KK 18mm,
Jimmy
Jimmy
Jimmy
Jimmy
WRENCHES
–
l 51083 Ø,GP,JR,RT
99-01
FOOTNOTES
30
1-1/8”
Envoy
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
93-97
WIRING
NO DRILL
NO DRILL
4
6
15
4
4
6
6
20
20
6 15
4
6
15
5
5
4
6 30
6 30
6 15
4
4
6
6
20
20
4
6 15
4
6
15
5
5
4
6 30
6 30
6 15
4
4
6
6
20
20
JT 2WD models only.
179
APPLICATIONS GUIDE
Prizm
10, 17, 18mm, 1” hole saw
11/16”
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
GEO
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
GMC
APPLICATIONS GUIDE
REESE TOWPOWER
GEO - GMC
GEO - GMC
178
REESE TOWPOWER
REESE TOWPOWER
NO DRILL
1-1/8”
18mm, 3/4” 1/2”
l 37051 FP,JT,KK
n 37041 FP,JT,KK 18mm, 3/4” 1/2”
Pickup, C/K Series w/6 ft. Bed 2 Dr.
Extended Cab, Inc. Sportside Fenders
HM,HX
n 44109 CQ,FP,GP,
GU,HX
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU,
HM,HX
n 44109 CQ,FP,GP,
GU,HX
85-87
1/2”
1/2”
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
3/4”, 7/8”
1/2”
5
5
6
1/2”
6
10 30
1/2”
1/2”
5
6
8 40
10 30
1/2”
6
10 30
18mm, 3/4”
deep socket
18mm, 3/4”
deep socket
n 41909 @,EK,
88-00
HM,SS, †
n 96909 @,EK,
HM,SS
Regular & Extended Cabs, Inc. Sportside Fenders
88-00
l 37069 –
n 37096 CA,HX
n 51022 Ø,GP
n 51017 GP,FP
n 51016 HM,FP
n 51021 Ø,HM,J
88-00
Pickup, C/K Series w/6 ft. Bed Regular & 88-00
Extended Cabs, Inc. Sportside Fenders w/10 Deep Drop Bumper
63-72
n 51016 CQ,HM,JT
n 51017 CQ,GP,JT
13, 18, 19mm,
3/4”, 13/16”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
A
–
–
74425
78058
78058
A
A
–
–
74178
78058
A
–
10
13 30 85741
78058
A
–
10
13 30 85741
–
BN
–
–
15/16", 3/4” 5/8”
7
12 40
85741
78058
A
85741
74180
–
99-00
Classic
only
7.5 40
6.5 90
l 37094 –
15/16", 3/4” 5/8”
7
12 40
NO DRILL
5
10 20
n 44105 Ø,GP
5
10 25
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
n 44108 FP,GU,
3/4”, 7/8”
18mm, 3/4” 1/2”
deep socket
6
10 30
3/16”, 9/32”,
1/2”, 17/32”
NO DRILL
5
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 30
5
10 20
n 96522 CO,HK
5
5.5 40
85741
78058
A
–
85741
78058
A
–
78058
A
–
1/4”, 1/2”,
9/16”
3/16”, 9/32”,
1/2”, 17/32”
3/16”, 9/32”,
1/2”, 17/32”
HM,HX
deep socket
n 37080 Ø,FS,J
7/8”
6
10 20
5
10 40
n 33065 FP
3/4”, 7/8”
1/2”
5
8
5
10 40
n 37087 FP
3/4”, 7/8”
1/2”
6
30 n 41938 @,GP, †
13/16”, 7/8” 9/16”
12
15 40 –
10 45 n 96938 @,GP
13/16”, 7/8” 9/16”
12
15 40
n 41940 @, †
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35
15
16 35
15
16 35
n 96947 @
BN
63-72
n 37081 M
7/8”
5
10 30
–
78058
A
–
73-84
3/4”, 7/8”
1/2”
78058
A
–
1/2”
18mm, 3/4”
deep socket
8 30
10 45
10 30 n 41938 @,GP
74425
3/4”, 7/8”
13/16”, 7/8” 9/16”
12
15 40 74425
–
BN
–
10 30 n 96938 @,GP
13/16”, 7/8” 9/16”
12
15 40 74425
–
BN
–
n 41940 @, †
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35 74425
–
BN
–
15
16 35 74425
–
BN
–
15
16 35 74425
78058
A
–
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 35 n 51017 CQ,GP,JT
n 51016 CQ,HM,JT
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18, 19mm,
3/4”, 13/16”
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
n 33065 FP
n 37087 FP
n 44108 FP,GU,
1/2”
5
6
6
3/16”, 9/32”,
1/2”, 17/32”
5
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
HM,HX
deep socket
n 96940 @
n 96947 @
Pickup, C/K Series w/8 ft. Bed w/
Deep Drop Bumper
85217
l 37034 GU
n 96940 @
Deep Drop Bumper
–
5
5
9/16”, 3/4” 1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18,
19mm, 3/4”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18, 19mm,
3/4”, 13/16”
13, 18,
19mm, 7/8”
13, 18, 19mm, 9/16”
13/16”,
15/16”
13, 18, 19mm, 9/16”
13/16”,
15/16”
OEM REPLACE.
8 30
8 40
10 30
3/4”, 7/8”
3/4”, 7/8”
FOOTNOTES
n 33065 CQ,DX,FP
n 33065 CQ,DX,FP
n 44108 CQ,FP,GU,
STANDARD WIRE
20
20
T-CONNECTOR
6
6
WT. DISTRIB.
INSTALL TIME
4
4
WT. CARRYING
DRILL BITS
6 30
6 30
6 15
WRENCHES
5
5
4
FOOTNOTES
15
HITCH
NUMBER
6
67-72
73-84
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
4
DRILL BITS
WRENCHES
6 15
FOOTNOTES
4
n 37081 M
73-84
06996
7/8”
5
10 30
74425
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
STYLE
15 n 51031 Ø, FP, HM, KK 18mm,
WIRING
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
NO DRILL
HITCH
NUMBER
18mm, 7/8”
CLASS V
INSTALL TIME
STYLE
DRILL BITS
n 06955 Ø,FP,GP,KK
HITCH
NUMBER
WRENCHES
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
2002
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
181
GMC
GMC
180
REESE TOWPOWER
REESE TOWPOWER
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
18mm, 3/4”
deep socket
deep socket
15 40 74178
–
BN
–
15 16 35 74178
15 16 35 74178
15 16 35
74178
–
–
BN
BN
–
–
78058
A
–
74178
78058
A
–
12
n 41940 @, †
n 96940 @
n 96947 @
21mm, 13/16”, 7/8” 9/16”
21mm, 13/16”, 7/8” 9/16”
88-91
n 33065 FP
3/4”, 7/8”
1/2”
5
8
3/4”, 7/8”
1/2”
18mm, 3/4”
deep socket
21, 24mm, 13/16”, 7/8” 11/16”
30
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 37087 FP
n 44108 FP,GU,
1/2”
6
6
10 45
10 35 n 41938 @,GP, †
13/16”, 7/8” 9/16”
12
15 40 74178
–
BN
–
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 35 n 96938 @,GP
13/16”, 7/8” 9/16”
12
15 40 74178
–
BN
–
n 41940 @, †
n 96940 @
n 96947 @
21mm, 13/16”, 7/8” 9/16”
–
–
BN
21mm, 13/16”, 7/8” 9/16”
BN
–
–
78058
A
–
–
HM,HX
deep socket
88-91
n 37081 M
7/8”
5
10 30
15 16 35 74178
15 16 35 74178
15 16 35 74178
74178
88-00
n 36007 Ø
18mm, 3/4”
5
10 40
85741
78058
A
85741
74180
–
l 37069 Ø
n 37096 CA,HX
n 51017 GP
n 51016 HM
n 51021 Ø,HM,J
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
NO DRILL
l 37034 GU
15/16", 3/4” 5/8”
7
12 30
7.5 40
6.5 90
l 37094 –
15/16", 3/4” 5/8”
7
12 30
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
NO DRILL 5
10 40
n 44108 FP,GU,
18mm, 3/4”
deep socket
1/2”
6
10 30 n 41901 @,DB,
10 40
n 44109 FP,GP, GU,HX 18mm, 3/4” 1/2”
6
10 30 n 96901 @,DB, GP,SN 18, 19mm,
9/16”
HM,HX
deep socket
GP,SN, †
n 45006 #,TF
3/4”
BN
BN
10
13 30 85741
99-00
Classic
only
BN
9/16”
10
13 30 85741
BN
1/2”
12
14 45
18, 19mm, 9/16”
13/16”, 7/8”
13/16”, 7/8”
10 20
7/16", 1/2" 35
–
74180
88-00
Pickup, C/K Series w/8 ft. Bed Regular 88-00
& Extended Cabs, w/10 Deep Drop Bumper
92-00
Pickup, C/K Series w/8 ft. Bed 4
Dr. Crew Cab
n 96522 CO,HK
l 37069 Ø
n 37096 CA,HX
n 51022 Ø,GP
n 51016 HM
n 51017 GP
n 51021 Ø,HM,J
06996
21, 24mm, 13/16”, 7/8” 11/16”
5
1/4”, 1/2”, 5
9/16”, 3/4” 1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18, 19mm,
3/4”, 13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
13, 18,
19mm, 7/8”
OEM REPLACE.
–
FOOTNOTES
BN
WT. DISTRIB.
INSTALL TIME
–
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
15 40 74178
13/16”, 7/8” 9/16”
10 30
n 51016 CQ,HM,JT
–
10 30 n 96938 @,GP
5
13, 18,
19mm, 3/4”,
13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
A
12
7/8”
7/16", 1/2" 35 n 51017 CQ,GP,JT
78058
13/16”, 7/8” 9/16”
n 37081 M
15, 18, 21mm,
9/16", 11/16",
3/4", T50
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/2”
HM,HX
STANDARD WIRE
13, 18,
19mm, 3/4”,
13/16”,
7/8”
13, 18,
19mm, 3/4”,
13/16”
74178
8 30
10 45
10 30 n 41938 @,GP, †
5.5 40
74178
78058
A
–
74178
78058
A
–
85741
74180
–
n 37080 Ø,FS,J
7/8”
6
10 20
n 36007 Ø
18mm, 3/4”
5
10 40
NO DRILL
l 37034 GU
15/16", 3/4” 5/8”
7
12 40
5
1/4”, 1/2”, 5
7.5 40
6.5 90
l 37094 –
15/16", 3/4” 5/8”
7
12 30
5
10 20
n 44105 Ø,GP
3/4”, 7/8”
5
10 25 n 41901 @,DB,
3/16”,
5
9/32”, 1/2”,
17/32”
3/16”,
5
9/32”, 1/2”,
17/32”
10 40
9/16”, 3/4” 1/2”
15,17,18,
19,21, 22mm,
9/16”,3/4”
13, 18,
19mm, 3/4”
13, 18,
19mm, 3/4”,
13/16”
13, 18,
19mm, 3/4”,
13/16”,
7/8”
13, 18,
19mm, 7/8”
5
9/16”
NO DRILL
NO DRILL
5
10 40
18, 19mm, 9/16”
GP,SN, †
13/16”, 7/8”
n 96901 @,DB, GP,SN 18, 19mm, 9/16”
13/16”, 7/8”
n 45006 #,TF
3/4”
1/2”
BN
10
13 30 85741
99-00
Classic
only
BN
10
13 30 85741
BN
12
14 45
–
10 20
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
WRENCHES
FOOTNOTES
HITCH
NUMBER
7/16", 1/2" 35 n 51017 CQ,GP,JT
1/2”
1/2”
85-87
n 88001 –
Crew Cab w/Deep Drop Bumper
Regular & Extended Cabs
10 40
5
6
6
3/4”, 7/8”
3/4”, 7/8”
WIRING
T-CONNECTOR
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 51016 CQ,HM,JT
Deep Drop Bumper
Pickup, C/K Series w/8 ft. Bed 4
Dr. Crew Cab
3/16”,
5
9/32”, 1/2”,
17/32”
n 33065 FP
n 37087 FP
n 44108 FP,GU,
85-87
n 88001 –
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
183
GMC
GMC
182
REESE TOWPOWER
REESE TOWPOWER
85-00
21mm,
3/4”,7/8”
l 37069 Ø
9/16”, 3/4” 1/2”
n 37096 Ø,JL
l 51081 Ø,RT,JL
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
l 37034 Ø
l 37094 Ø
15/16", 3/4” 5/8”
6.5 35
n 37016 Ø
21mm, 3/4”
10.5 15
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, NO DRILL 6
3/4”
l 44564 Ø,JL
n 44619 Ø,CM
n 88001 DB
15, 18, 21mm,
9/16", 11/16",
3/4", T50
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
13/16”, 7/8” 9/16”
12
15
15 40 –
16 35 –
–
–
–
–
–
–
15
16 35 –
–
–
–
15
16 35 –
–
7
7
12 25
12 25 n 41932 Ø,@,
21mm, 7/8”
HM,JL, †
7.5 12 20 n 96932 Ø,@, HM,JL 21mm, 7/8”
8
6
7.5 15
NO DRILL
12
14 20 74180
NO DRILL
12
14 20
H
85262
–
Amber
bulb
–
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
78058
H
85262
–
78058
H
85262
–
Amber
bulb
–
15/16", 3/4” 5/8”
15/16", 3/4” 5/8”
7
7
12 25
12 25 n 41932 Ø,@,
NO DRILL
12
14 20 74180
n 37016 Ø
21mm, 3/4”
12
14 20
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
NO DRILL
15
HM,JL, †
6
10.5 15
6
8
6
7.5 15
21mm, 7/8”
RD
15
85262
l 51072 Ø,RT,JL
l 37069 Ø
l 51081 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL
9/16”, 3/4” 1/2”
21, 22mm,
3/4”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
6
7.5 25
10.5 15
l 37034 Ø
l 37094 Ø
n 37016 Ø
l 44563 Ø,JL
l 44564 Ø,JL
n 44619 Ø,CM
7/16", 1/2" 35
Pickup, Sierra 2500 LD 6.6 99-02
ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan
7/8”
6
8
15/16", 3/4” 5/8”
7
7
12 25
12 25 n 41932 Ø,@,
15/16", 3/4” 5/8”
21mm, 3/4”
NO DRILL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15
21mm, 7/8”
HM,JL, †
7.5 12 20 n 96932 Ø,@, HM,JL 21mm, 7/8”
21mm, 3/4”
6 10.5 15 n 45009 Ø,#,TF
6
8
6
7.5 15
78058
H
85262
–
78058
H
85262
–
Amber
Bulb
–
NO DRILL
12
14 20 85217
NO DRILL
12
12
14 20
14 20
NO DRILL
RD
–
15
85262
–
06996
85209
–
8
7/16", 1/2" 35
Pickup, Sierra 1500 LD 8 99-02
ft. Bed, 2 & 4 WD
–
15
6
n 44619 Ø,CM
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15/16", 3/4” 5/8”
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
15
6
OEM REPLACE.
n 96938 @,CC
n 41940 @, †
8
10.5 15
FOOTNOTES
–
7/8”
l 44564 Ø,JL
n 88001 DB
WT. DISTRIB.
INSTALL TIME
A
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WT. CARRYING
–
7/16", 1/2" 35
ft. Bed, 2 & 4 WD
n 88001 DB
DRILL BITS
15 40 –
6
6
–
12
7/8”
NO DRILL
A
RD
78058
H
85262
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
l 51072 Ø,RT,JL
78058
13/16”, 7/8” 9/16”
n 96947 @
99-02
74178
n 41938 @,CC, †
n 96940 @
Pickup, Sierra 1500 LD
6.6 ft. Bed, 2 & 4 WD
WRENCHES
FOOTNOTES
10 20
STANDARD WIRE
6
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
7/8”
WIRING
T-CONNECTOR
n 37080 Ø,FS,J
92-00
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Crew Cab, w/10 Deep Drop Bumper
Pickup, C/K Series, Cab & Chassis
w/34 Wide Frames
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
185
GMC
GMC
184
REESE TOWPOWER
REESE TOWPOWER
9/16”, 3/4” 1/2”
21, 22mm,
3/4”
NO DRILL
n 37016 Ø
l 44563 Ø,JL
l 44564 Ø,JL
n 44619 Ø,CM
Pickup, Sierra 2500 LD 8
Pickup, Sierra 1500 HD
6.6 ft. Bed, 2 & 4 WD
15/16", 3/4” 5/8”
7
7
12 25
12 25 n 41932 Ø,@, HM,JL, † 21mm, 7/8” NO DRILL
12
14 20 74180
6 10.5 15 n 45009 Ø,#,TF
12
12
14 20
14 20
15/16", 3/4” 5/8”
21mm, 3/4”
NO DRILL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15
6
8
6
7.5 15
–
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
5
7.5 25
6.5 35
l 37034 Ø
15/16", 3/4” 5/8”
7
12 25
10.5 15
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25
21mm, 3/4”
7.5 12 20
6 10.5 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
l 44564 Ø,JL
n 44619 Ø,CM
n 88001 DB
NO DRILL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15 n 41932 Ø,@,
JL, LT
n 37096 Ø,JL
6
8
6
7.5 15
12
14 20
15
n 44657 HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 74682
NO DRILL 5
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
JL, LT
6.5 40
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
13
16 25
13/16”, 7/8”
RD
85209
H
–
78058
H
–
85262
5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 74682
NO DRILL 5
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
21, 22mm,
3/4”, 7/8”
NO DRILL
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
n 37096 Ø,JL
JL, LT
6.5 40
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
n 45293 Ø, #, CS, FS, 18, 21mm
18
18 25
13
16 25
NO DRILL
LT, TF
HM, LT
13/16”, 7/8”
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
RD
78058
85262
n 51050 SA
21, 22mm,
3/4”, 7/8”
NO DRILL
5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 74682
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
JL, LT
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
3/4”
JL, LT
OEM REPLACE.
85262
10 20
NO DRILL
FOOTNOTES
STANDARD WIRE
H
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
n 51050 SA
06996
RD
85209
14 20 –
HM, LT
n 88001 DB
–
85262
5
21, 22mm,
3/4”, 7/8”
l 51073 Ø, RT, CS, FS, 21, 22mm,
01-02
Amber
bulb
85262
n 51050 SA
n 88001 DB
–
H
–
Pickup, Sierra 2500 HD 8 01-02
ft. Bed, 2 & 4 WD
85262
78058
12
21mm, 7/8”
01-02
n 88001 DB
H
–
NO DRILL
HM,JL, †
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
01-02
78058
15
99-02
01-02
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
8
85262
n 37016 Ø
l 44563 Ø,JL
Pickup, Sierra 3500
WT. CARRYING
DRILL BITS
6
15, 18, 21mm, 9/16", 7/16", 1/2" 35
11/16", 3/4", T50
l 51081 Ø,RT,JL
6.6 ft. Bed, 2 & 4 WD
7/8”
HM, LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
13/16”, 7/8”
13/16”, 7/8”
18, 21mm
NO DRILL
12
15 25
13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
85262
H
85219
RD
78058
H
85219
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 DB
WRENCHES
l 37034 Ø
l 37094 Ø
FOOTNOTES
7.5 25
10.5 15
HITCH
NUMBER
5
6
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
l 33093 Ø,JL
DRILL BITS
7.5 15
WRENCHES
5
FOOTNOTES
NO DRILL
STYLE
DRILL BITS
21mm,
3/4”,7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
l 37069 Ø
l 51081 Ø,RT,JL
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51072 Ø,RT,JL
99-02
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
187
GMC
GMC
186
REESE TOWPOWER
REESE TOWPOWER
DRILL BITS
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
T-CONNECTOR
STANDARD WIRE
78058
l 51081 Ø,RT,JL
21, 22mm,
3/4”
21mm,
3/4”,7/8”
NO DRILL
6
10.5 15
l 37034 Ø
15/16", 3/4” 5/8”
7
12
14 20
NO DRILL
5
7.5 15
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25 n 45009 Ø,#,TF
12
14 20
21mm, 3/4”
7.5 12 20
6 10.5 15
n 37016 Ø
l 44563 Ø,JL
l 44564 Ø,JL
n 44619 Ø,CM
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
l 51081 Ø,RT,JL
9/16”, 3/4” 1/2”
21, 22mm,
3/4”
NO DRILL
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
6
7.5 25
10.5 15
l 37034 Ø
l 37094 Ø
l 44564 Ø,JL
n 44619 Ø,CM
6.6 ft. Bed, 2 & 4 WD
6
7.5 15
15 n 41932 Ø,@,
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
7
7
12 25 n 45009 Ø,#,TF
12
12
14 20
14 20
21mm, 3/4”
NO DRILL
7.5 12 20
6 10.5 15
6
8
15
6
7.5 15
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
15 n 41932 Ø,@,
85219
78058
RD
85219
NO DRILL
12
14 20 74682
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
15/16", 3/4” 5/8”
n 37016 Ø
21mm, 3/4”
7.5 12 20
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
NO DRILL
6
10.5 15
6
8
6
7.5 15
21mm, 7/8”
15
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
78058
RD
85219
78058
RD
85219
6
8
NO DRILL
12
14 20 74682
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
15/16", 3/4” 5/8”
n 37016 Ø
21mm, 3/4”
7.5 12 20
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
n 44619 Ø,CM
7/16", 1/2" 35
15 n 41932 Ø,@,
NO DRILL
HM,JL, †
6
10.5 15
6
8
6
7.5 15
21mm, 7/8”
RD
74682
7/8”
l 44564 Ø,JL
06996
RD
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
8
HM,JL, †
RD
74682
6
03-05
n 88001 DB
85219
15/16", 3/4” 5/8”
7/16", 1/2" 35
03-05
RD
14 20 74682
7/8”
n 44619 Ø,CM
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
12
85262
l 44564 Ø,JL
n 88001 DB
85219
NO DRILL
21mm, 7/8”
03-04
03-05
RD
8
HM,JL, †
RD
78058
6
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
85219
74682
7/8”
15/16", 3/4” 5/8”
RD
15
7/16", 1/2" 35
l 51081 Ø,RT,JL
6.6 ft. Bed, 2 & 4 WD
8
NO DRILL
85262
n 37016 Ø
l 44563 Ø,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
21mm, 3/4”
7/16", 1/2" 35
ft. Bed, 2 & 4 WD
n 88001 DB
HM,JL, †
15
85262
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
NO DRILL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15 n 41932 Ø,@,
OEM REPLACE.
WRENCHES
14 20 74682
FOOTNOTES
12
HITCH
NUMBER
NO DRILL
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
21mm, 7/8”
DRILL BITS
8
WRENCHES
6
FOOTNOTES
7/8”
HITCH
NUMBER
STYLE
l 33093 Ø,JL
DRILL BITS
7.5 25
WRENCHES
5
FOOTNOTES
9/16”, 3/4” 1/2”
HITCH
NUMBER
l 37069 Ø
l 51072 Ø,RT,JL
n 88001 DB
WIRING
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
03-04
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
FOOTNOTES
CLASS II
CLASS I
189
GMC
GMC
188
REESE TOWPOWER
REESE TOWPOWER
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
l 51081 Ø,RT,JL
NO DRILL
7/8”
6
8
5
7.5 25
6.5 35
l 37034 Ø
15/16", 3/4” 5/8”
7
12 25
10.5 15
l 37094 Ø
15/16", 3/4” 5/8”
7
12 25
21mm, 3/4”
7.5 12 20
6 10.5 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
6
8
6
7.5 15
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14 20
85219
15 25 74682
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
12
15 25
13
17 25
13
16 25
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
13/16”, 7/8”
18, 21mm
NO DRILL
13/16”, 7/8”
85262
5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 74682
NO DRILL 5
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
21, 22mm,
3/4”, 7/8”
NO DRILL
JL, LT
HM, LT, †
6.5 40
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
n 45293 Ø, #, CS, FS, 18, 21mm
18
18 25
13
16 25
RD
78058
85262
21, 22mm,
3/4”, 7/8”
NO DRILL
5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 74682
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
12
15 25
3/4”
JL, LT
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
HM, LT
13/16”, 7/8”
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
n
l
l
n
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
37016
44563
44564
44619
15 n 41932 Ø,@,
7/8”
6
8
NO DRILL
12
14 20 74682
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
7.5
6
6
6
12
10.5
8
7.5
15/16", 3/4” 5/8”
Ø
21mm, 3/4”
Ø,JL
21, 22mm, 3/4” NO DRILL
NO DRILL
Ø,JL
21mm, 3/4”, 7/8” NO DRILL
Ø,CM
21, 22mm, 3/4”
NO DRILL
HM,JL, †
21mm, 7/8”
85219
RD
78058
85262
l 51072 Ø,RT,JL
RD
RD
85219
13 17 25
18 18 25
13 16 25
7/16", 1/2" 35
l 51081 Ø,RT,JL
06996
RD
12
13/16”, 7/8”
04-05
78058
JL, LT
15, 18, 21mm,
9/16", 11/16",
3/4", T50
85219
6
n 51050 SA
n 88001 DB
RD
1/2”
7/16", 1/2" 35
03-06
78058
21, 22mm,
3/4”, 7/8”
HM, LT, †
RD
74682
n 44657 HM,SA
JL, LT
OEM REPLACE.
15
10 20
3/4”
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
12
NO DRILL
LT, TF
HM, LT
13/16”, 7/8”
5.8 ft. Bed, 2 & 4 WD
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
5
JL, LT
n 37096 Ø,JL
Pickup, Sierra 3500
85219
NO DRILL
l 51073 Ø, RT, CS, FS, 21, 22mm,
15, 18, 21mm,
9/16", 11/16",
3/4", T50
RD
21, 22mm,
3/4”, 7/8”
n 51050 SA
n 88001 DB
78058
14 20 74682
7/16", 1/2" 35
03-06
85219
85262
n 51050 SA
n 88001 DB
RD
12
21mm, 7/8”
03-05
03-06
78058
NO DRILL
HM,JL, †
7/16", 1/2" 35
JL, LT
8 ft. Bed, 2 & 4 WD
NO DRILL
21, 22mm, NO DRILL
3/4”
7/8”
21, 22mm, NO DRILL
3/4”
15 n 41932 Ø,@,
74682
RD
78058
RD
85219
20
15
15
15
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 44619 Ø,CM
6.6 ft. Bed, 2 & 4 WD
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
l 33093 Ø,JL
l 44564 Ø,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
DRILL BITS
7.5 15
n 37016 Ø
l 44563 Ø,JL
n 88001 DB
WRENCHES
FOOTNOTES
STYLE
5
STANDARD WIRE
21mm,
3/4”,7/8”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51072 Ø,RT,JL
WIRING
T-CONNECTOR
ft. Bed, 2 & 4 WD
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
191
GMC
GMC
190
REESE TOWPOWER
REESE TOWPOWER
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
15,17,18, 1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
10.5 15
6
8
15/16", 3/4” 5/8”
21, 22mm, NO DRILL
3/4”
7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
15 n 41932 Ø,@,
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
RD
85219
12
14 20 74682
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
6
10.5 15
8 15
21, 22mm, 3/4” NO DRILL
15 n 41932 Ø,@,
78058
RD
85219
78058
RD
85219
7/8”
6
8
NO DRILL
12
14 20 74682
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
6
10.5 15
8 15
15/16", 3/4” 5/8”
21, 22mm, 3/4” NO DRILL
21mm, 3/4”,
7/8”
NO DRILL
HM,JL, †
21mm, 7/8”
RD
74682
78058
RD
85219
78058
RD
85219
7.5 15
l 33093 Ø,JL
21mm, 3/4”, 7/8” NO DRILL
6
8
12
14 20 74682
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
15/16", 3/4” 5/8”
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
21mm, 3/4”, 7/8” NO DRILL
6
6
10.5 15
8 15
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
21, 22mm, 3/4”
NO DRILL
7/16", 1/2" 35
RD
74682
5
85262
21mm,
3/4”,7/8”
2007
l 37069 Ø
9/16”, 3/4” 1/2”
n 37096 Ø,JL
l 51081 Ø,RT,JL
5
7.5 15
l 33093 Ø,JL
7/8”
6
8
5
7.5 25
l 37034 Ø
15/16", 3/4” 5/8”
7
12 25 n 41932 Ø,@, HM,JL, † 21mm, 7/8” NO DRILL
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
3/4”
6.5 35
l 37094 Ø
15/16", 3/4” 5/8”
7
10.5 15
l 44563 Ø,JL
21, 22mm, NO DRILL
3/4”
7/8”
6
10.5 15
6
8
NO DRILL
l 44564 Ø,JL
06996
78058
NO DRILL
21mm, 7/8”
21mm, 3/4”,7/8” NO DRILL
l 51072 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
85219
l 51072 Ø,RT,JL
2006
n 88001 DB
RD
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
8
HM,JL, †
RD
74682
6
7/8”
7/16", 1/2" 35
OEM REPLACE.
15
7/8”
15/16", 3/4” 5/8”
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
14 20 74682
2006
n 88001 DB
85219
12
21mm, 7/8”
7/16", 1/2" 35
2006
RD
NO DRILL
HM,JL, †
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
8
2006
n 88001 DB
85219
6
7/16", 1/2" 35
2006
RD
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
7/8”
7/16", 1/2" 35
Pickup, Sierra 1500 HD 2006
Pickup, Sierra 1500 LD 5.8 2006
ft. Bed, 2 & 4 WD
n 88001 DB
15 n 41932 Ø,@,
STANDARD WIRE
21mm,
3/4”,7/8”
74682
15
RD
74682
78058
RD
85219
12
14 20 85262
78058
BN,RD
85219
12
14 20
15
85262
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 88001 DB
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51072 Ø,RT,JL
T-CONNECTOR
2006
l 44564 Ø,JL
8 ft. Bed, 2 & 4 WD
WIRING
04-05
l 51081 Ø,RT,JL
6.6 ft. Bed, 2 & 4 WD
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
6.6 ft. Bed, 2 & 4 WD
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
193
GMC
GMC
192
REESE TOWPOWER
REESE TOWPOWER
9/16”, 3/4” 1/2”
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
l 37069 Ø
n 37096 Ø,JL
9/16”, 3/4” 1/2”
NO DRILL
5
7.5 15
l 33093 Ø,JL
5
7.5 25
6.5 35
l 37034 Ø
l 37094 Ø
10.5 15
l 44563 Ø,JL
l 44564 Ø,JL
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
JL, LT
n 37096 Ø,JL
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
6
10.5 15
8 15
15/16", 3/4” 5/8”
21, 22mm, 3/4” NO DRILL
7/8”
15 n 41932 Ø,@,
78058
BN,RD
85219
8
NO DRILL
12
14 20 85262
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
6
10.5 15
8 15
15/16", 3/4” 5/8”
21, 22mm, 3/4” NO DRILL
7/8”
15 n 41932 Ø,@,
78058
BN,RD
85219
78058
BN,RD
85219
6
8
NO DRILL
12
14 20 85262
15/16", 3/4” 5/8”
7
7
12 25
12
14 20
6
6
10.5 15
8 15
15/16", 3/4” 5/8”
21, 22mm, 3/4” NO DRILL
21mm, 3/4”,
7/8”
NO DRILL
21mm, 7/8”
RD
85262
7/8”
HM,JL, †
78058
BN,RD
85219
78058
BN,RD
85219
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 85262
NO DRILL 5
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
JL, LT
6.5 40
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
13
16 25
13/16”, 7/8”
RD
85262
n 44657 HM,SA
NO DRILL
5
10 20
n 44657 Ø,HM,SA
21, 22mm,
3/4”, 7/8”
1/2”
6
12
15 25 85262
NO DRILL 5
3/4”
15,17,18,
1/4”, 1/2”, 5
19,21, 22mm, 9/16”
9/16”,3/4”
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
21, 22mm,
3/4”, 7/8”
NO DRILL
6.5 40
JL, LT
HM, LT, †
13/16”, 7/8”
HM, LT
13/16”, 7/8”
LT, TF
12
15 25
13
17 25
n 45293 Ø, #, CS, FS, 18, 21mm
18
18 25
13
16 25
NO DRILL
LT, TF
HM, LT
13/16”, 7/8”
7/16", 1/2" 35
OEM REPLACE.
85219
6
21mm, 7/8”
FOOTNOTES
BN,RD
85262
JL, LT
n 37096 Ø,JL
06996
78058
7/8”
HM,JL, †
RD
85262
10 20
l 51073 Ø, RT, CS, FS, 21, 22mm,
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WT. DISTRIB.
INSTALL TIME
14 20 85262
21mm, 7/8”
7/16", 1/2" 35
n 51050 SA
n 88001 DB
WT. CARRYING
DRILL BITS
12
HM, LT
2007
85219
NO DRILL
HM,JL, †
5
21, 22mm,
3/4”, 7/8”
l 51073 Ø, RT, CS, FS, 21, 22mm,
BN,RD
8
85262
n 51050 SA
15, 18, 21mm,
9/16", 11/16",
3/4", T50
78058
6
7/16", 1/2" 35
2007
8 ft. Bed, 2 & 4 WD w/Aftermarket Roll Pan (Classic)
n 88001 DB
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
7.5 25
6.5 35
85219
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
5
15,17,18, 1/4”, 1/2”, 5
19,21,
9/16”
22mm,
9/16”,3/4”
21, 22mm, 3/4” NO DRILL 6
15 n 41932 Ø,@,
BN,RD
7/8”
7/16", 1/2" 35
2007
2007
n 88001 DB
l 33093 Ø,JL
78058
85262
l 51081 Ø,RT,JL
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7.5 15
7/16", 1/2" 35
2007
2007
n 88001 DB
5
STANDARD WIRE
l 37069 Ø
n 37096 Ø,JL
NO DRILL
85262
85262
RD
78058
BN,RD
85219
RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
DRILL BITS
21mm,
3/4”,7/8”
l 51081 Ø,RT,JL
n 88001 DB
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51072 Ø,RT,JL
WIRING
T-CONNECTOR
Pickup, Sierra 1500 LD 5.8 2007
ft. Bed, 2 & 4 WD (Classic)
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
195
GMC
GMC
194
REESE TOWPOWER
REESE TOWPOWER
WT. DISTRIB.
INSTALL TIME
T-CONNECTOR
STANDARD WIRE
15 25 85262
78058
l 51073 Ø, RT, CS, FS, 21, 22mm,
NO DRILL
5
7.5 20
l 44577 Ø, CS, FS,
21, 22mm,
3/4”
NO DRILL
6
3/4”
HITCH
NUMBER
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
NO DRILL
NO DRILL
5
5
7.5 20
7.5 20
l 44577 Ø, CS, FS,
JL, LT
l 44577 Ø, CS, FS,
JL, LT
21, 22mm,
3/4”
21, 22mm,
3/4”
NO DRILL
NO DRILL
6
l 51073 Ø, RT, CS, FS, 21, 22mm,
JL, LT
3/4”
l 51073 Ø, RT, CS, FS, 21, 22mm,
07-10
JL, LT
07-13
07-13
07-13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
6
12
15 25 85262
13
17 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 85262
12
15 25 85262
n 45022
13/16”, 7/8”
18, 21mm
NO DRILL
13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 85262
12
15 25 85262
13
17 25
13/16”, 7/8”
13/16”, 7/8”
13
16 25
12
15 25 85262
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
11 20 n 41939 Ø, @, CS, FS,
HM, LT, †
3/4”
NO DRILL
NO DRILL
5
5
7.5 20
7.5 20
l 44577 Ø, CS, FS,
JL, LT
l 44577 Ø, CS, FS,
JL, LT
21, 22mm,
3/4”
21, 22mm,
3/4”
NO DRILL
NO DRILL
6
6
11 20 n 41939
HM, LT
Ø, #, CS, FS,
LT, TF
Ø, #, CS, FS,
LT, TF
Ø, @, CS, FS,
HM, LT
Ø, @, CS, FS,
HM, LT, †
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
11 20 n 41939 Ø, @, CS, FS,
HM, LT, †
13/16”, 7/8”
13/16”, 7/8”
18, 21mm
NO DRILL
13/16”, 7/8”
18, 21mm
NO DRILL
13/16”, 7/8”
18, 21mm
NO DRILL
12
15 25 85262
13
17 25
18, 21mm
NO DRILL
18
18 25
13/16”, 7/8”
13
16 25
l 51072 Ø,RT,JL
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 33093 Ø,JL
21mm, 3/4”, 7/8” NO DRILL
6
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL
6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL
6
10.5 15
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 44564 Ø,JL
l 33093 Ø,JL
21mm, 3/4”, 7/8” NO DRILL
l 51072 Ø,RT,JL
21mm, 3/4”, 7/8” NO DRILL
6
6
8
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL
6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL
6
10.5 15
21mm,
3/4”,7/8”
NO DRILL
5
7.5 15
l 44564 Ø,JL
l 33093 Ø,JL
21mm, 3/4”, 7/8” NO DRILL
l 51072 Ø,RT,JL
21mm, 3/4”, 7/8” NO DRILL
6
6
8
8
l 51081 Ø,RT,JL
21, 22mm,
3/4”
NO DRILL
6
10.5 15
l 44563 Ø,JL
21, 22mm, 3/4” NO DRILL
6
10.5 15
21mm, 3/4”, 7/8” NO DRILL
l 44564 Ø,JL
6
8
8 15
11-13
JL, LT
3/4”, 7/8”
15
3/4”, 7/8”
3/4”, 7/8”
13, 19, 21, 22mm, 3/8”, 9/16”
3/4”, 7/8”
hole saw
RD
78058
BN,RD
85219
BN
78058
BN,RD
85219
BN
78058
BN,RD
85219
BN
78058
BN,RD
85219
BN
78058
BN,RD
85219
85262
78058
BN,RD
85219
85262
78058
BN,RD
85219
15
16 20 85262
78058
BN,RD
85219
15
16 20 85262
–
BN
–
18
18 60
15
15
GP, JL, LT, †
85219
85262
15
15
GP, JL, LT
n 45300 #, CS, FS, HM,
JL, KH, LT
06996
13
15 25 85262
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
15 25
12
HM, LT, †
n 96944
07-10
12
n 45293
13/16”, 7/8”
18, 21mm
NO DRILL
85262
JL, LT
Pickup, Sierra 2500 HD 8 07-10
ft. Bed, 2 & 4 WD (New Body Style)
HM, LT
n 45022 Ø, #, CS, FS,
LT, TF
n 45293 Ø, #, CS, FS,
LT, TF
n 96944 Ø, @, CS, FS,
HM, LT
7/16", 1/2" 35
l 51073 Ø, RT, CS, FS, 21, 22mm,
07-10
JL, LT
BN,RD
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3/4”
13/16”, 7/8”
OEM REPLACE.
WT. CARRYING
12
HM, LT, †
DRILL BITS
WRENCHES
WRENCHES
6
FOOTNOTES
FOOTNOTES
1/2”
HITCH
NUMBER
STYLE
21, 22mm,
3/4”, 7/8”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
n 44657 Ø,HM,SA
DRILL BITS
DRILL BITS
10 20
HITCH
NUMBER
WRENCHES
5
FOOTNOTES
NO DRILL
JL, LT
n 88001 DB
WIRING
21, 22mm,
3/4”, 7/8”
n 51050 SA
2007
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Sierra 3500 Series 8
ft. Bed, 2 & 4 WD (Classic)
CLASS III/IV
CLASS III
FOOTNOTES
CLASS II
CLASS I
197
GMC
GMC
196
REESE TOWPOWER
REESE TOWPOWER
11-13
JL, LT
3/4”, 7/8”
8
85219
15
16 20 85262
–
BN
–
18
18 20
8
15
16 20 85262
78058
BN,RD
85219
15
16 20 85262
–
BN
–
18
18 60
15
16 20 85262
78058
BN,RD
85219
15
16 20 85262
–
BN
–
18
18 20
15
16 20 85262
78058
BN,RD
85219
15
16 20 85262
–
BN
–
78058
BN,RD
85219
–
–
–
–
–
–
HITCH
NUMBER
GP, JL, LT
3/4”, 7/8”
n 45300 Ø, #, CS, FS, 13, 19, 21, 3/8”, 9/16”
HM, JL, LT 22mm, 3/4”, hole saw
7/8”
GP, JL, LT, † 3/4”, 7/8”
11-13
JL, LT
3/4”, 7/8”
8
GP, JL, LT
n 45300 #, CS, FS, HM,
JL, KH, LT
12 20 n 41942 Ø, @, CS, FS,
GP, JL, LT, †
3/4”, 7/8”
13, 19, 21, 22mm, 3/8”, 9/16”
3/4”, 7/8”
hole saw
3/4”, 7/8”
APPLICATIONS GUIDE
Pickup, Sierra Denali HD
11-12
JL, LT
3/4”, 7/8”
8
GP, JL, LT
n 45300 Ø, #, CS, FS,
HM, JL, LT
12 20 n 41942 Ø, @, CS, FS,
GP, JL, LT
3/4”, 7/8”
13, 19, 21, 22mm, 3/8”, 9/16”
3/4”, 7/8”
hole saw
3/4”, 7/8”, †
GP, JL, LT
n 45300 #, CS, FS, HM,
JL, KH, LT
n 41936 @, †
Pickup, Sierra, Cab & Chassis 3500 01-07
Series w/34 Wide Frames (Classic)
n
n
n
n
96936
41938
96938
41940
n
n
n
n
96936
41938
96938
41940
n 06958 Ø,GU,HM,RH 18mm, 3/4”, 7/8” –
83-84
35 n 37152 CN,GU,SB
n 37042 CN,GU,SB
n 88001 CN,GU,SB
85-93
S-15 & Sonoma Pickup
w/Rear Fascia & No Step Bumper
85-97
w/Standard Box & Step Bumper, Inc. ZR2 & Highlander Pkg.
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 33053 Ø,GU
35 n 37152 CN,GU,SB
3.5 6
45
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 33053 Ø,GU
7/8”
3.5 6
45
7/16", 1/2" 40
11/16”
15
16 35 –
17/32”
12
17/32”
12
12
12
15
30
15 40
15 40 –
16 35
15
16 35 –
15
16 35 –
21mm,
13/16”, 7/8”
21mm,
13/16”, 7/8”
21, 24mm,
13/16”, 7/8”
3/4”
@
3/4”
@,CC, †
13/16”, 7/8” 9/16”
@,CC
13/16”, 7/8” 9/16”
@, †
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
30 85262
–
78058
BN,RD
85219
–
–
–
–
–
–
–
–
78058
–
–
–
78058
–
–
74178
78058
BN
–
74178
78058
BN
–
78058
BN
–
74178
n 33055 Ø,†
94-97
06996
7/8”
16 35 –
17/32”
74051
n 37042 CN,GU,SB
15, 18, 21mm, 9/16",
11/16", 3/4", T50
1/4”, 1/2”, 5
9/16”
7/16", 1/2" 40
n 06958 Ø,GU,HM,RH 18mm, 3/4”, 7/8” –
n 88001 CN,GU,SB
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15
13/16”, 7/8” 9/16”
n 96947 @
83-84
9/16”
@,CC
@, †
n 96940 @, †
w/Standard Box & Step Bumper
9/16”
13/16”, 7/8” 9/16”
n 41936 @, †
30 85262
30
15 40
15 40 –
16 35
3/4”
n 96947 @
18 60
12
12
12
15
@
@,CC, †
n 96940 @
Pickup, Sierra, Cab & Chassis 3500 07-13
HD w/34 Wide Frames (New Body Style)
3/4”, 7/8”
13, 19, 21, 22mm, 3/8”, 9/16” 18
3/4”, 7/8”
hole saw
3/4”
17/32”
12
OEM REPLACE.
BN,RD
3/4”, 7/8”
FOOTNOTES
78058
DRILL BITS
16 20 85262
GP, JL, LT, †
WRENCHES
15
FOOTNOTES
3/4”, 7/8”
3.5 6
40
74178
JT 2WD models only.
APPLICATIONS GUIDE
STANDARD WIRE
3/4”, 7/8”
T-CONNECTOR
JL, LT
WT. DISTRIB.
INSTALL TIME
11-13
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
CLASS V
WT. CARRYING
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
199
GMC
GMC
198
REESE TOWPOWER
REESE TOWPOWER
CLASS V
HITCH
NUMBER
HITCH
NUMBER
DRILL BITS
WRENCHES
HITCH
NUMBER
n 06958 Ø,GU,RH
98-04
1983
84-91
84-91
92-94
85-94
n
n
n
n
n
Safari Extended Body
90-05
96-99
88002
88002
88002
88002
06227
18mm, 3/4”, 7/8” –
–
1/2”
–
3/4”
1/2”
3.5 5 20
35 n 37152 AF, CN, GU, ST 15,17,18,
1/4”, 1/2”, 5
19,21,
9/16”
22mm,T-50,
9/16”,3/4”
n 37042 AF, CN, GU, ST 15,17,18, 1/4”, 1/2”, 5
19,21,
9/16”
22mm,T-50,
9/16”,3/4”
6
n 44062 CN,GU
3/4”
NO DRILL
3.5 5
20
6.5 40
74216
30
30
30
30
30
n
n
n
n
n
–
3/4”
1/2”
–
3/4”
1/2”
Ø,CR,HM
14mm, 15mm
NO DRILL
n 06037 Ø,GP,HC
n 06227 Ø,CR,HM
14mm, 15mm
NO DRILL
14mm, 15mm
NO DRILL
30
30 n 51029 Ø,CS,GP
n 06037 Ø,GP,HC
14mm, 15mm
NO DRILL
30 n 37152 AF
n 88001 –
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/16", 1/2" 0
n 06099 Ø,HM
7/8”
NO DRILL
n 37042 AF
15 n
l
n
n
51023
37051
37041
37152
Ø,HM
HM
HM
HM
n 37042 HM
15, 18, 21mm, 9/16",
11/16", 3/4", T50
1/2”
40
7/16", 1/2" 40
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3/4”
n 88001 HM
3/4”
3.5 6
3.5 6 30
33014
33014
33014
33014
33057
Ø
18mm
NO DRILL
Ø
18mm
NO DRILL
3.5
3.5
3.5
3.5
3.5
6
6
6
6
6
60
60
60
60
45
74427
74427
74427
–
–
78058
78058
78058
78058
78058
–
–
–
–
–
–
–
78058
–
–
74659
78013
HG
74886
Ø
18mm
NO DRILL
Ø
18mm
NO DRILL
Ø,CR,HM
15, 17mm,
3/4”
NO DRILL
15, 17mm,
3/4”
15, 17mm
1/2”, 9/16” 3.5 6
45
NO DRILL
3.5 6
30
30
n 33057 CR,HM
15, 17mm
NO DRILL
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
3/4”, 7/8”
1/4”, 1/2”, 5
9/16”
6
n 44010 Ø,CS,GP
1/4”, 1/2”, 5
9/16”
6.5 65
n 33057 Ø,CS,GP
15, 17mm,
3/4”
NO DRILL
3.5 6
NO DRILL
5
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”
NO DRILL
5
10 20
1/2”
10 15
6 35
6 35
6
n 37004 Ø,HM
3/4”
n 44028 Ø,HM
3/4”, 7/8”
NO DRILL
5
10 30 n 41921 @,HM, †
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
n 06099 Ø,HM
7/8”
7/16", 1/2" 30
NO DRILL
15 n
l
n
n
51023
37051
37041
37152
Ø,HM
HM
HM
HM
n 37042 HM
n 88001 HM
15, 18, 21mm, 9/16",
11/16", 3/4", T50
7/16", 1/2" 30
5
3/4”
1/2”
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”, 7/8”
NO DRILL
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
10 15
6 35
6 35
6
n 37004 Ø,HM
3/4”
NO DRILL
5
10 20
n 44028 Ø,HM
3/4”, 7/8”
NO DRILL
5
10 30 n 41921 @,HM, †
n 45007 Ø,#,HM,TF
n 96946 @,HM
BN
–
13/16”, 15/16” 9/16”
10
12 35 74659
–
HG
–
13/16”, 15/16” 9/16”
10 12 35 74659
12 14 45
10 13 35 74659
85246
–
HG
–
78013
HG
74886
9/16”
10
12 35 85246
–
HG
–
9/16”
10
12 35 85246
–
HG
–
NO DRILL
12 14 45
10 13 35 85246
3/4”
NO DRILL
13/16”, 15/16” 9/16”
HG
6.5 30
n 96921 @,HM
06996
BN
6.5 30
n 96921 @,HM
n 45007 Ø,#,HM,TF
n 96946 @,HM
00-02
OEM REPLACE.
BN
n 51063 CN,GP,GU
98-04
3/4”, 7/8”
FOOTNOTES
STANDARD WIRE
–
n 33055 Ø,†
98-99
WT. DISTRIB.
INSTALL TIME
BN
WT. CARRYING
78058
DRILL BITS
74216
WRENCHES
–
FOOTNOTES
BN
HITCH
NUMBER
78058
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
74216
DRILL BITS
98-04
WRENCHES
–
FOOTNOTES
BN
STYLE
78058
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
74216
DRILL BITS
98-04
WRENCHES
–
FOOTNOTES
BN
INSTALL TIME
STYLE
78058
FOOTNOTES
74216
IONSTALL TIME
STYLE
–
DRILL BITS
BN
WRENCHES
78058
FOOTNOTES
74216
HITCH
NUMBER
–
STYLE
BN
13/16”,
15/16”
13/16”,
15/16”
3/4”
13/16”,
15/16”
9/16”
HG
JT 2WD models only.
APPLICATIONS GUIDE
78058
S-15 Jimmy Downsize, All Models
S-15 Jimmy Downsize, 2 Dr.
S-15 Jimmy Downsize, 4 Dr.
S-15 Jimmy Downsize, All Models
Safari Standard Body
Savana Van Full Size
WIRING
T-CONNECTOR
96-97
n 88001 CN,GU,ST
CLASS III/IV
CLASS III
74178
YEAR
MODEL
w/Sportside Box & Non-Towing Bumper
All, Except Sportside Box w/Non-Towing Bumper &
Standard Box w/Rear Fascia
w/Sportside Box & Non-Towing Bumper
w/Standard Box & Step Bumper, Inc. ZR2,
Highlander Pkg. & Crew Cab
APPLICATIONS GUIDE
CLASS II
CLASS I
201
GMC
GMC
200
REESE TOWPOWER
REESE TOWPOWER
HM
HM
n 37042 HM
22mm,T-50, 9/16”
9/16”,3/4”
15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50, 9/16”
9/16”,3/4”
10 15
6 35
6 35
6
3/4”
NO DRILL
5
10 20
n 44028 Ø,HM
3/4”, 7/8”
NO DRILL
5
10 30 n 41921 @,HM, †
APPLICATIONS GUIDE
n 06099 Ø,HM
04-13
n 45007 Ø,#,HM,TF
n 96946 @,HM
7/16", 1/2" 30
NO DRILL
15 n 51023 Ø,HM
3/4”, 7/8”
NO DRILL
5
10 15
n 37004 Ø,HM
3/4”
NO DRILL
5
10 20 n 41921 @,HM, †
l 37051 HM
3/4”
1/2”
5
6
35
n 44028 Ø,HM
3/4”, 7/8”
NO DRILL
5
10 30 n 96921 @,HM
n 37041 HM
n 37152 HM
3/4”
1/2”
5
1/4”, 1/2”, 5
9/16”
6
6
35
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
n 37042 HM
n 88001 HM
15, 18, 21mm,
9/16", 11/16",
3/4", T50
1/4”, 1/2”, 5
9/16”
n 45007 Ø,#,HM,TF
n 96946 @,HM
Sonoma GT
Suburban
Suburban
Suburban
92-93
n 33055 Ø,†
73-84
85-91
92-99
n 37152 –
n 37042 –
n 51012 HM
n 51012 HM
10-13
99-10
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
12 35 78029
–
HG
–
9/16”
10
12 35 78029
–
HG
–
NO DRILL
13/16”,
15/16”
9/16”
12 14 45
10 13 35 78029
13/16”,
15/16”
13/16”,
15/16”
3/4”
9/16”
10
12 35 78029
78058
HG
74886
9/16”
10
12 35 78029
–
HG
–
NO DRILL
12 14 45
10 13 35 78029
13/16”,
15/16”
9/16”
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 30
n 06391 Ø,HM
18,19mm, 3/4”
NO DRILL
25 n 51193 Ø,HM
n 51185 Ø,HM
18,19mm, 3/4”
NO DRILL
25
74178
78058
–
–
3.5 6
40
74178
78058
–
–
7.5 40
7.5 40
10 30
74225
74178
74180
78058
78058
78058
BN
BN
7/8”
5
5
1/2”, 9/16” 6
BN
–
–
–
74178
85716
78058
78104
CH
85716
16 35 –
78104
–
–
85779
–
–
–
1/4”, 1/2”, 5
9/16”
6
n 44605 –
n 44605 –
n 37074 HM
1/4”, 1/2”, 5
9/16”
6.5 30
n 44096 HM
7/8”
1/2”, 9/16” 5
7
1/2”, 9/16” 5
7 30
7 30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/8”
7/8”
1/2”, 9/16” 5
3/4”, 7/8”
3/4”, 7/8”
1/2”
1/2”
30
74180
18,19mm,
3/4”
NO DRILL
3.5 4 30
n 44637 Ø,HM
3.5 4
30
n 44630 Ø,†,HM
3.5 4
30
n 41940 @, †
n 41940 @, †
99-10
n 41940 @, †
99-10
n 96940 @
n 96947 @
06996
10
40
n 96940 @
n 96947 @
Topkick C6500
9/16”
3.5 6
3/4”, 7/8”
3/4”, 7/8”
n 96940 @
n 96947 @
Topkick C5500, Cab & Chassis
w/34 Wide Frames
74886
74051
n 33055 Ø,GP
Terrain All, Except V6 Models
Topkick C4500
13/16”,
15/16”
13/16”,
15/16”
3/4”
7/16", 1/2" 30
92-93
91-92
10-13
–
6.5 30
Sonoma GT
Syclone
Terrain All Models
78058
21mm, 13/16”, 7/8” 9/16”
15
21mm, 13/16”, 7/8” 9/16”
15 16 35 –
15 16 35 –
–
15
16 35 –
–
15 16 35 –
15 16 35 –
–
15
16 35 –
–
15 16 35 –
15 16 35 –
–
21, 24mm,
11/16”
13/16”, 7/8”
21mm, 13/16”, 7/8” 9/16”
21mm, 13/16”, 7/8” 9/16”
21, 24mm,
11/16”
13/16”, 7/8”
21mm, 13/16”, 7/8” 9/16”
21mm, 13/16”, 7/8” 9/16”
21, 24mm,
13/16”, 7/8”
11/16”
BN
CH
–
85779
–
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/8”
78029
6.5 30
n 96921 @,HM
n 88001 HM
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
n 37004 Ø,HM
STANDARD WIRE
NO DRILL
1/2”
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
5
5
3/4”
1/2”
5
15,17,18, 19,21, 1/4”, 1/2”, 5
3/4”, 7/8”
3/4”
WIRING
T-CONNECTOR
Ø,HM
HM
DRILL BITS
51023
37051
37041
37152
WRENCHES
15 n
l
n
n
FOOTNOTES
DRILL BITS
NO DRILL
HITCH
NUMBER
7/8”
CLASS V
INSTALL TIME
STYLE
n 06099 Ø,HM
2003
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
203
GMC
GMC
202
REESE TOWPOWER
REESE TOWPOWER
n 96940 @
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
15
16 35 –
–
–
–
15
16 35 –
15
16 35 –
–
–
–
15
16 35 –
–
–
–
15
16 35 –
n 96940 @
n 96947 @
n 51003 BF
87-95
Van, G-Series
Vandura & Rally Full Size w/Lo-Mount Taillights
1996
Yukon Old Body Style
92-00
n 51003 BF
n 37152 –
n 37042 –
n 51012 HM
n 51012 HM
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 37042 –
n 51201 Ø,CN,HM
n 37042 –
n 51201 Ø,CN,HM
Yukon Denali Old Body Style
n 51012 HM
n 51012 HM
n 37152 –
01-02
n 37042 –
n 51201 Ø,CN,HM
06996
Ø,BF,CV
3/4”, 9/16”
NO DRILL
5
30
45
30
45
30
7.5 30
6
n 44011 Ø,BF,CV
n 37074 HM
3/4”, 9/16”
NO DRILL
7/8”
1/2”, 9/16” 6
7.5 45
10 30
1/4”, 1/2”, 5
9/16”
6.5 30
n 44096 HM
7/8”
1/2”, 9/16” 5
7
1/2”, 9/16” 5
7 30
7 30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
3/4”, 9/16” NO DRILL
5
1/4”, 1/2”, 5
9/16”
15,17,18, 19,21,
22mm, T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/8”
7/8”
1/2”, 9/16” 5
–
78058
–
–
74486
78058
–
–
74486
78058
–
–
74180
78058
BN
–
78058
BN,RD
85219
78058
BN,RD
85219
74180
78058
BN,RD
–
74682
78058
RD
85219
30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
1/4”, 1/2”, 5
9/16”
6
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
1/4”, 1/2”, 5
9/16”
6.5 30
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20
5
10 15
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15
NO DRILL
74682
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
1/4”, 1/2”, 5
9/16”
6
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
1/4”, 1/2”, 5
9/16”
6.5 30
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20
5
10 15
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15
NO DRILL
74682
85262
n 37042 –
Yukon Denali
New Body Style w/Amber Turn Signals
NO DRILL
NO DRILL
10
7.5
10
7.5
10
7/16", 1/2" 30
n 37152 –
99-00
3/4”, 9/16”
3/4”, 9/16”
NO DRILL
NO DRILL
85262
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
Ø,BF,CV
Ø,BF,CV
3/4”, 9/16”
3/4”, 9/16”
7/16", 1/2" 30
Yukon New Body Style w/Amber Turn Signals 03-06
n 88001 –
7.5 30
5
5
5
5
5
Ø,BF,CV
Ø,BF,CV
–
74180
n 37152 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
5
35365
44011
35365
44011
35365
7/16", 1/2" 30
Yukon New Body Style w/Amber Turn Signals 00-02
n 88001 –
3/4”, 9/16” NO DRILL
n
n
n
n
n
–
1/4”, 1/2”, 5
9/16”
6
n 37074 HM
7/8”
1/2”, 9/16” 6
10 30
1/4”, 1/2”, 5
9/16”
6.5 30
n 44096 HM
7/8”
1/2”, 9/16” 5
7
1/2”, 9/16” 5
7 30
7 30
n 44656 HM
7/8”
1/2”, 9/16” 5
7.5 30
1/4”, 1/2”, 5
9/16”
6
n 37072 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 20
1/4”, 1/2”, 5
9/16”
6.5 30
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20
5
10 15
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
7/8”
7/8”
1/2”, 9/16” 5
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
NO DRILL
30
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
78-86
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
OEM REPLACE.
–
FOOTNOTES
–
n 41940 @, †
99-10
STANDARD WIRE
–
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
16 35 –
DRILL BITS
15
WRENCHES
21mm,
9/16”
13/16”, 7/8”
FOOTNOTES
n 41940 @, †
HITCH
NUMBER
WT. CARRYING
99-10
n 96947 @
Topkick C8500
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Topkick C7500
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
205
GMC
GMC
204
REESE TOWPOWER
REESE TOWPOWER
15, 18, 21mm,
9/16", 11/16",
3/4", T50
Accord 2 Dr.
Accord 4 Dr., Including Hybrid
Accord 2 Dr., 2.4L I4 Engine
Accord 2 Dr., 3.5L V6 Engine
Accord 4 Dr., 2.4L I4 Engine
Accord 4 Dr., 3.5L V6 Engine
Accord Crosstour All Models
Civic 4 Dr.
n 51201 Ø,CN,HM
03-05
06-07
06-07
08-12
08-12
08-12
08-12
10-12
92-98
77019
77013
77165
77161
51167
77161
51167
77161
51167
77161
51167
77177
77208
77177
77208
77177
77208
77177
77208
77224
77025
06996
–
14, 17mm, 7/8”
Ø,HM
10, 14, 17mm, 9/16” NO DRILL
1/2”
Ø,JR
3/4”
NO DRILL
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HR,JR
11/16”, 3/4”
9/16”
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10mm, 11/16”
NO DRILL
Ø,HM,JR,KH
10, 13, 17mm
NO DRILL
Ø, EP
9/16”, 7/8”
NO DRILL
85219
–
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20 n 96930 @,CN
22mm,
1/2”
13/16”, 7/8”,
3/4”
21mm, 3/4” 1/2”
10
12 35 85262
–
BN
–
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15 n 45013 #,TF
12
14 50
RD
RD
OEM REPLACE.
BN
FOOTNOTES
STANDARD WIRE
78058
–
DRILL BITS
74682
12 35 85262
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
WRENCHES
DRILL BITS
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
10
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
5
10 15
NO DRILL
22mm, 7/8”
NO DRILL
6
10 20
n 41930 @,CN, †
n 44095 Ø,CN,HM
22mm, 7/8”
NO DRILL
5
10 20 n 96930 @,CN
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15 n 45013 #,TF
22mm,
1/2”
13/16”, 7/8”,
3/4”
10
74682
12 35 85262
78058
–
BN
85219
–
22mm,
1/2”
13/16”, 7/8”,
3/4”
21mm, 3/4” 1/2”
10
12 35 85262
–
BN
–
12
14 50
78058
–
RD
BN
85219
–
85262
n 37042 –
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
22mm,
1/2”
13/16”, 7/8”,
3/4”
10 20
7/16", 1/2" 30
n 37152 –
Accord 4 Dr., Including Hybrid
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
NO DRILL
6
n 37072 Ø,CN,HM
n 44095 Ø,CN,HM
22mm, 7/8”
1/4”, 1/2”, 5
9/16”
22mm, 7/8”
NO DRILL
6
5
10 20
10 20 n 41930 @,CN, †
1/4”, 1/2”, 5
9/16”
6.5 30
l 44668 Ø,CN,HM
22mm, 7/8”
NO DRILL
6
10 15 n 96930 @,CN
5
10 15
01-02
90-93
94-97
98-02
03-05
6
n 41930 @,CN, †
n 37072 Ø,CN,HM
n 88001 –
2 & 4 Dr.
2 & 4 Dr.
2 & 4 Dr.
2 Dr.
10 15
03-06
n 51201 Ø,CN,HM
Accord
Accord
Accord
Accord
5
NO DRILL
NO DRILL
85262
n 37042 –
HONDA
6.5 30
22mm, 7/8”
7/16", 1/2" 30
n 37152 –
Yukon XL Denali
1/4”, 1/2”, 5
9/16”
n 37072 Ø,CN,HM
20
30
15
25
25
25
25
25
25
25
25
30
30
45
30
30
30
45
30
40
15
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
NO DRILL
22mm,
1/2”
13/16”, 7/8”,
3/4”
10
74682
12 35 85262
22mm,
1/2”
13/16”, 7/8”,
3/4”
10
12 35 85262
–
74660
74660
74718
78013
78104
78104
78013
CG
–
–
–
–
78002
78104
HG
–
74713
–
HG
–
78002
78104
HG
–
74697
78104
CH
–
74697
78104
CH
–
74697
78104
CH
–
74697
78104
CH
–
85721
–
78104
78104
CH
–
–
–
78013
–
HG
HG
92-95
Only
96-98
Only
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
T-CONNECTOR
n 88001 –
1/4”, 1/2”, 5
9/16”
WT. DISTRIB.
INSTALL TIME
n 51201 Ø,CN,HM
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
22mm, 7/8”
WIRING
WT. CARRYING
n 37042 –
Yukon XL, All Styles
WRENCHES
FOOTNOTES
HITCH
NUMBER
00-02
n 37152 –
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Yukon XL, All Styles
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
207
GMC - HONDA
GMC - HONDA
206
REESE TOWPOWER
Civic
Civic
Civic
Civic
Civic
3 Dr. Hatchback
2 & 4 Dr.
2 & 4 Dr.
Si Models Only
2 Dr., Except Si Models
Civic 4 Dr., Except Hybrid & Si Models
Civic 4 Dr., Si Models
93-98
96-00
99-00
01-05
02-05
06-12
06-12
06-12
06-12
06-12
CR-V
CR-V
97-01
02-06
CR-V, All Styles
07-11
CRV, All Styles
12-13
Element
03-04
Element All, Except SC
05-06
Element SC Models Only
05-06
07-08
Element SC Models Only
Fit All, Inc. Sport
Fit
Odyssey
Odyssey
Odyssey
Odyssey
Passport
07-10
09-11
07-08
09-13
95-98
99-04
05-10
11-12
94-97
Passport w/Door Mounted Spare
98-01
n
n
n
–
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
77194
77025
77116
77033
77139
51165
77139
51165
77139
51165
77139
51165
77139
51165
77164
77149
51166
77147
51168
9/16”, 7/8”
NO DRILL
X
9/16”, 11/16”
7/16”
Ø
9/16”, 7/8”
NO DRILL
–
9/16”, 7/8”
1-1/8”
TA
3/4”, 7/8”
1/2”
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,HM,JR
10mm, 3/4”, 9/16” NO DRILL
Ø,RC
3/4”
NO DRILL
Ø,BY,JR
3/4”
NO DRILL
Ø,BY,JR
3/4”
NO DRILL
Ø,JR
3/4”, 11/16”
NO DRILL
Ø,JR
3/4”, 11/16”
NO DRILL
20
15
15
30
30
30
30
30
30
30
30
30
30
30
20
20
20
20
20
77034
77034
77034
77034
–
3/4”, 7/8”
7/16”
Ø
3/4”, 7/8”
7/16”
–
3/4”, 7/8”
7/16”
Ø
3/4”, 7/8”
7/16”
n 77034 –
n 77034 Ø
3/4”, 7/8”
7/16”
3/4”, 7/8”
7/16”
3/4”, 7/8”
7/16”
n 77034 –
n 77153 Ø
n 77198 Ø,HM
12, 13mm, 11/16” NO DRILL
11/16”
NO DRILL
40 l 97209 Ø,HM,JR,SV 10, 17mm,
11/16”
98-02
Pilot
03-08
Pilot
Prelude All Models
Prelude All Models
Prelude All Models
Ridgeline
09-11
92-96
97-00
01-02
06-13
H3
06-10
HUMMER
HM,JR
14mm, 3/4”
1/2”
Ø,HM,JR
18mm
NO DRILL
Ø,HM,JR
18mm
NO DRILL
Ø,HM,JR
18mm
NO DRILL
Ø
17, 19mm,
NO DRILL
11/16”, 5/8”
19mm, 3/4”, 7/8” NO DRILL
n 06366 Ø
30
20 l 51156 Ø,RT,HM,JR 18mm
20 l 51156 Ø,RT,HM,JR 18mm
20 l 51156 Ø,RT,HM,JR 18mm
30
15 n 37152 Ø
n 06356 Ø,HM
19mm, 3/4”, 7/8” NO DRILL
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
NO DRILL
l 51139 Ø,RT,JR
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
T-CONNECTOR
CG
–
–
–
–
–
–
78013
–
–
74697
78013
CG
–
78013
–
–
–
–
–
78013
–
–
HG
–
–
3.5
30
74660
74660
78013
78013
HG
–
–
3.5
25
74704
78013
CG
–
l 44675 Ø,HM,JR,SV 10, 17mm,
NO DRILL
3.5 0
40
l 44612 Ø
11/16”
3/4” 7/8”
NO DRILL
3.5
30
74660
78013
HG
–
l 44612 Ø
3/4” 7/8”
NO DRILL
3.5
30
–
78104
–
–
l 44612 Ø,EP
l 44612 Ø
3/4” 7/8”
NO DRILL
NO DRILL
3.5
3.5
35
30
–
78099
78104
78104
–
3/4” 7/8”
CH
–
–
l 44612 Ø,EP
l 44612 Ø
3/4” 7/8”
NO DRILL
3/4” 7/8”
NO DRILL
3.5
3.5
35
30
78099
78099
74697
74697
74660
74660
74715
85747
74477
78104
78104
78013
78013
78013
78013
78013
78013
78013
BN,HG
–
–
–
–
–
–
–
–
–
74217
78013
BN,HG
–
3.5 5 15
3.5 5 15
3.5 5 15
6
1/4”, 1/2”, 5
9/16”
6.5 15
78013
78013
78013
78013
78013
40
1/4”, 1/2”, 5
9/16”
NO DRILL
–
–
–
–
74714
–
n 44643 Ø,BY,HM,JR 11/16”, 7/8” NO DRILL
l
l
l
n
44174
44174
44174
33040
Ø,HM,JR
3.5 5 30
5
6 20
18mm
NO DRILL
Ø,HM,JR
18mm
NO DRILL
Ø,HM,JR
18mm
NO DRILL
Ø
19mm
NO DRILL
n 33041 Ø
10, 14, 17,
19mm
78013
–
–
3.5 0
15
n 51159 Ø,CS,GP,JR
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
NO DRILL
–
93-95
Only
96-98
Only
–
l 44575 Ø,HM,JR
25
25
25
06953
06398
06398
06398
06057
78104
25
25
25
n
n
n
n
n
06996
NO DRILL
–
3.5 0
25
25
25
25
n 37042 Ø
Passport w/Under Vehicle Spare
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51205 Ø,HM,JR,TJ 17mm, 11/16” NO DRILL
WIRING
15
l 06144 Ø,HM,JR,SV 10, 17mm, 11/16” NO DRILL
n
n
n
n
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
n 77025 Ø
CLASS V
n 44589 Ø,CS,GP,JR
15/16”
10, 14, 17, NO DRILL
19mm
3.5 5
3.5 5
3.5 5
5
15
15
15
45
CG
CG
HG
HG
CH
CH
3.5 5
15
74217
78013
BN,HG
–
3.5 5
30
74660
78013
HG
–
85715
–
–
74660
78013
78104
78013
78013
–
HG
85780
–
–
–
–
74682
78058
–
n 44528 Ø,JR
5
6
20
n 44177 Ø
21mm
5
5
25
NO DRILL
CH
CH
–
–
85219
JT 2WD models only.
209
APPLICATIONS GUIDE
Civic Hybrid
YEAR
MODEL
Civic 2 Dr. Coupe
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
Civic 2 Dr., Si Models
APPLICATIONS GUIDE
REESE TOWPOWER
HONDA - HUMMER
HONDA - HUMMER
208
REESE TOWPOWER
12-13
06-12
Elantra All Models
Elantra All Models, Inc. GT
96-00
01-06
Elantra 4 Dr. Sedan
Elantra Touring 5 Dr.
Elantra 4 Dr. Sedan
Elantra GT, All Styles
Entourage
Genesis 4 Dr. Sedan
07-10
09-12
11-12
2013
07-09
09-12
Genesis 2 Dr. Coupe
Santa Fe
Santa Fe
10-11
01-06
07-09
Santa Fe
12, 13mm, 3/4” (x2) NO DRILL
Ø
19mm
NO DRILL
Ø,JR
17, 19mm
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,JR
NO DRILL
TA
10, 12mm,
17mm, 3/8”
13/16”, 7/8”
1/2”
Ø,HM
14, 17mm, 7/8”
NO DRILL
Ø,HM
14, 17mm, 7/8”
NO DRILL
Ø,JR
17, 19mm
NO DRILL
Ø,GP,JR
17, 19mm
NO DRILL
Ø,HM,JR
11/16”, 3/4”
1/2”
Ø,HM
3/4”, Crowfoot Adaptor NO DRILL
Sonata
Sonata
Sonata All, Incl. GLS, SE & Limited
Tiburon
Tucson
02-05
06-10
11-13
03-08
05-09
10mm, 9/16”,
11/16”
1/2”
16mm
NO DRILL
n
n
n
n
77030
77133
77225
77042
l 51088 Ø,RT,GP,JR
3.5
35
n 51076 Ø
n 51206 Ø, HM
16mm
NO DRILL
16mm
NO DRILL
3.5
3.5 5
20
15
n 33037 Ø,GP,JR
n 44549 Ø
16mm
n 44639 Ø,HM
16mm
NO DRILL
3.5
3.5
35
20
NO DRILL
3.5 5
15
15
NO DRILL
78013
–
–
–
–
78013
78013
–
–
–
–
74710
78088
85761
85761
78046
78110
78013
78104
78104
78104
78104
85748
78088
74692
78104
78013
78013
74692
85729
78013
78013
15
20
30
25
78013
78013
78013
78013
78013
10, 18mm, 9/16” NO DRILL
Ø,HM,JR,KH
10, 13mm, 11/16” NO DRILL
TA
9/16”, 3/4”
1/2”
06339
51180
06667
06994
06132
07-12
FX35
FX35
03-08
09-12
n –
FX45
FX50
03-08
09-12
n –
G35 4 Dr. Sedan
G37 4 Dr. Sedan
I30
I30
I35
JX35, All Styles
QX4
07-08
09-12
95-99
00-01
02-04
2013
97-03
EP,GP
13mm, 3/4”
3/4”
EP,GP
13mm, 3/4”
3/4”
TA
7/8”
1/2”
TA
7/8”
1/2”
TA
7/8”
1/2”
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP, †
16mm
NO DRILL
Ø,GP, †
16mm
NO DRILL
Ø,GP.JR
16mm
NO DRILL
Ø,JR,X
Ø,JR,X
12mm, 19mm
12mm, 19mm
NO DRILL
NO DRILL
25
25
15
15
20
17mm
–
NO DRILL
5
–
–
CG
–
–
85729
CG
85729
CH
CG
Factory Tow
Package
models only
CG
–
–
–
CG
–
–
–
–
–
3.5
25
n 44642 Ø,†,GP
16mm
NO DRILL
3.5 4
15
85722
78013
CH
–
n 44666 Ø,GP,JR
n 44573 Ø,HM,JR
16mm
NO DRILL
3.5 5.25 20
5 5 30
85756
78104
–
–
–
–
–
CG
CG
–
l 44610 Ø
10, 12, 13, 14, NO DRILL
17, 19mm
3.5
40
–
78105
–
78104
CH
l 44610 Ø
10, 12, 13, 14, NO DRILL
17, 19mm
3.5
40
–
78105
–
78104
CH
78108
78108
–
–
–
78104
78104
78104
78103
78013
–
–
–
–
–
–
74218
78013
HG
–
l 44679 Ø,HM
l 33050 Ø
n 44132 Ø
17mm
BN,CH
CH
45
l 51046 Ø,HM
CH
–
–
–
n 44582 Ø,GP.JR
45
15
CG
CG
n
74710
74710
–
78034
45
45
30
30
30
n 06061 Ø,GP
–
3.5 5.25 30
NO DRILL
Ø,HM
–
–
CH
78013
Ø,HM
OEM REPLACE.
74690
74692
17, 19mm
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
DRILL BITS
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
20
–
–
–
–
–
–
Veracruz
06996
3.5 4
78013
78013
78013
78013
15
10-13
77204
77204
77028
77028
77028
NO DRILL
–
–
–
–
NO DRILL
12, 14, 17mm,
9/16”
14, 17mm, 7/8”
n
n
n
n
n
n
n
n
n
n
19mm
60
l 44682 Ø,J,JR
n 77090 Ø,†,JR
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 44537 Ø,JR
n 06133 Ø,HM
2013
99-01
INFINITI
DRILL BITS
30
15
15
25
25
15
20
n 06659 HM,JR,KH
WIRING
20
20
25
15
15
15
15
20
10-12
Santa Fe
Sonata
Tucson
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
77111
77089
51162
77167
77246
77250
77283
DRILL BITS
n
n
n
n
n
n
n
Ø
WRENCHES
77053
77136
77167
77263
77272
77263
77272
77148
FOOTNOTES
n
n
n
l
n
l
n
n
CLASS V
18mm
NO DRILL
17mm
NO DRILL
17mm
NO DRILL
30 0.525 3.5
5 5.5 20
5 5.5 20
–
CH
CH
–
–
–
–
5.5 20
JT 2WD models only.
211
APPLICATIONS GUIDE
Azera, All Models
HITCH
NUMBER
95-99
00-05
06-11
07-11
2012
STYLE
Accent, All Models
Accent All Models
Accent 4 Dr. Sedan
Accent 3 Dr. Hatchback Only
Accent, 4 Dr. Sedan
YEAR
MODEL
HYUNDAI
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
Accent, 5 Dr. Hatchback
APPLICATIONS GUIDE
REESE TOWPOWER
HYUNDAI - INFINITI
HYUNDAI - INFINITI
210
REESE TOWPOWER
only models 85219
w/ Tow
Package
5
6
5
8 30
10 45
10 45
–
78058
–
–
–
78058
–
–
–
INTERNATIONAL
Pickup, Full Size
69-75
69-75
ISUZU
Amigo w/Door Mounted Spare
Axiom w/Under Vehicle Spare
98-00
02-03
n 06366 Ø
19mm, 3/4”, 7/8” NO DRILL
n 33041 Ø
n 33055 Ø,†
n 06958 Ø,GU,HM,RH 18mm, 3/4”, 7/8” –
96-97
n 33053 Ø,GU
35
n 33055 Ø,†
Hombre w/Rear Fascia & No Step Bumper 98-00
98-00
Hombre w/Step Bumper
n 06958 Ø,GU,RH
n 88001 CN,GU,ST
Oasis
Pickup I-Series All Models
96-99
06-07
n 06953 HM,JR
Pickup I-Series All Models
2008
Rodeo
1991
n 06057 Ø
Rodeo
92-97
n 06057 Ø
Rodeo w/Door (Tailgate) Mounted Spare
98-01
18mm, 3/4”, 7/8” –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14mm, 3/4”
35 n 37152 AF, CN, GU, ST 15,17,18, 19,21, 1/4”, 1/2”, 5
22mm,T-50,
9/16”,3/4”
n 37042 AF, CN, GU, ST 15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
n 51063 CN,GP,GU 3/4”
1/2”
BN,HG
–
–
NO DRILL
3.5 6
40
74178
78058
BN
–
NO DRILL
3.5 6
45
74178
78058
BN
–
NO DRILL
3.5 6
40
3.5 5
20
74216
74216
78058
78058
BN
NO DRILL
BN
–
–
6.5 40
3.5 5 20
6
7.5 25
n 44593 Ø,GP
NO DRILL
6
7.5 25
n 44593 Ø,GP
NO DRILL
6
7.5 25
74660
78001
78013
78013
BN,CG
–
–
NO DRILL
6
7.5 25
78001
78013
BN,CG
–
NO DRILL
5
45
–
78013
–
–
NO DRILL
5
45
74477
78013
BN,HG
–
3.5 5
15
74217
78013
BN,HG
–
3.5 5
15
74217
78013
BN,HG
–
74217
74661
78013
78013
BN,HG
7.5 45
BN,HG
–
–
–
78013
–
–
78013
HG
–
19mm
15
n 44621 Ø
19mm, 3/4”, 7/8” NO DRILL
15
n 33041 Ø
15/16”
15/16”
19mm, 3/4”, 7/8” NO DRILL
15
30
n 33043 –
14, 17, 19mm, 1/2”
1/2”
5
14, 17, 19mm
1/2”
9/16”, 3/4”, 7/8”, NO DRILL
various metric
30 n 37152 –
15, 18, 21mm, 7/16", 1/2" 45
9/16", 11/16",
3/4", T50
9/16”, 3/4”, 7/8”, NO DRILL 30 n 37152 –
various metric
n 37042 –
n 51001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 45
21, 22mm,
11/16”
21, 22mm,
11/16”
NO DRILL
n 33040 Ø
n 51001 –
06996
78013
78013
30
n 06366 Ø
n 06130 Ø
n 88001 –
–
74217
n 33040 Ø
n 06356 Ø,HM
n 06954 Ø,GP
20
30
n 37042 –
91-96
Cherokee
Downsize, All Models (Will Not Fit Grand Cherokee)
1/2”
3/4”
3.5 5
30
n 06366 Ø
n 88001 –
1/4”, 1/2”, 5
9/16”
n 44062 CN,GU
1” hole saw
21, 22mm,
11/16”
21, 22mm,
11/16”
19mm
17, 19mm,
NO DRILL
11/16”, 5/8”
17, 19mm,
NO DRILL
11/16”, 5/8”
19mm, 3/4”, 7/8” NO DRILL
n 06954 Ø,GP
9/16”
6
19mm, 7/8”,
15/16”
13, 18, 19mm,
3/4”, 7/8”
18mm, 3/4”,
7/8”
13, 18, 19mm,
3/4”, 7/8”
74216
n 51074 Ø,GP
JEEP
84-90
Cherokee
7/8”
7/16", 1/2" 40
n 51074 Ø,GP
98-04
Rodeo w/Under Vehicle Spare & Except
Models Equipped w/3.5L
Rodeo Sport 2 Dr., w/Door Mounted Spare 01-03
92-02
Trooper All Models
1/2”
1/2”
15
Hombre w/Rear Fascia & No Step Bumper 96-97
Hombre w/Step Bumper
3/4”, 7/8”
3/4”, 7/8”
OEM REPLACE.
STANDARD WIRE
78058
FOOTNOTES
T-CONNECTOR
74682
WT. DISTRIB.
INSTALL TIME
10 15
10 15
WT. CARRYING
6
6
l 44674 Ø, HM
l 44674 Ø, HM
DRILL BITS
NO DRILL
NO DRILL
08-10
WRENCHES
19mm
19mm
QX56
FOOTNOTES
only models 85219
w/ Tow
Package
HITCH
NUMBER
78058
19mm
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
74682
l 37091 Ø
DRILL BITS
10 15
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
6
04-07
n 33065 FP
n 37087 FP
n 37081 M
WIRING
NO DRILL
QX56
Pickup, Full Size w/Deep Drop Bumper
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 3/4”,
13/16”, 7/8”
1/4”, 1/2”, 5
9/16”
6
n 33002 –
3/4”, 13/16”, NO DRILL
7/8”
3.5 5.5 45
1/4”, 1/2”, 5
9/16”
6.5 35
n 44088 –
13/16”, 3/4”
3.5 5
NO DRILL
HG
40
3.5 5 40
74672
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 3/4”,
13/16”, 7/8”
1/4”, 1/2”, 5
9/16”
6
n 33002 –
3/4”, 13/16”, NO DRILL
7/8”
3.5 5.5 45
1/4”, 1/2”, 5
9/16”
6.5 35
n 44088 –
13/16”, 3/4”
3.5 5
NO DRILL
74476
40
3.5 5 40
74476
HG
JT 2WD models only.
213
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
INFINITI - JEEP
INFINITI - JEEP
212
REESE TOWPOWER
REESE TOWPOWER
n 37042 –
n 51001 –
n 88001 –
06-10
07-10
11-12
07-10
1993
n
n
n
n
n
06378
06428
06428
06428
06081
Ø
NO DRILL
Ø,GP
16mm, 15/ 16”
5/8”
Ø,GP
16mm, 15/ 16”
5/8”
Ø,EP,GP
16mm, 15/ 16”
5/8”
Ø
18, 19mm
1/2”
20
15
15
30
30
n 06081 Ø
94-98
6.5 35
n 44088 –
13/16”, 3/4”
3.5 5
NO DRILL
3.5
15,17,18, 19,21, 1/4”, 1/2”, 5 6
5 7.5 20
3.5
15
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18, 19mm
30
9/16”
1/4”, 1/2”, 5
9/16”
NO DRILL
6.5 35
33095
44555
44661
44555
33006
Ø,GP,TU
16,22mm
Ø,EP,GP
Ø
18, 19mm
NO DRILL
5 7.5 20
3.5
15
3.5
15
3.5
30
3.5 5 45
n 44093 Ø
18, 19mm
NO DRILL
3.5 5
n
n
n
n
n
Ø
3/4”
Ø,GP
NO DRILL
NO DRILL
78044
74705
85764
74705
74667
HG
78013
78104
78104
78104
78104
n 51010 Ø
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18, 19mm
–
BN,CH
GC
85253
–
–
–
–
3.5 5 20
1/4”, 1/2”, 5
9/16”
6
n 33006 Ø
18, 19mm
NO DRILL
3.5 5
45
1/4”, 1/2”, 5
9/16”
6.5 35
n 44093 Ø
18, 19mm
NO DRILL
3.5 5
20
NO DRILL
BN,CG
BN,CH
20
74667
30 n 37152 –
–
3.5 5 40
n 51085 Ø,EP,GP
n 37152 –
NO DRILL
HG
OEM REPLACE.
78013
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
74206
40
7/16", 1/2" 35
1/2”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
1/4”, 1/2”, 5
9/16”
74668
GC
78104
GC,JM
–
3.5 5 20
7/16", 1/2" 35
74668
Grand Cherokee
1999
n 06966 Ø
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
Grand Cherokee
00-04
n 06966 Ø
18, 19mm
NO DRILL
15 n 51059 Ø
18, 19mm
NO DRILL
3.5 5 15
n 44092 Ø
n 33018 Ø,EP
Grand Cherokee
All, Except SRT-8 & Models w/OEM Tow Hook
Grand Cherokee
Models w/OEM Tow Hook
Grand Cherokee
All, Except SRT-8 & Models w/OEM Tow Hook
Grand Cherokee
Grand Cherokee
All, Except Models w/OEM Tow Hook
Grand Cherokee
Grand Wagoneer
05-06
n 06378 Ø
3/4”
NO DRILL
20 n 51149 Ø
3/4”
NO DRILL
5
7.5 20
05-06
n 06378 Ø,AI
3/4”
NO DRILL
90 n 51149 Ø,AI
3/4”
NO DRILL
5
07-10
n 06378 Ø
3/4”
NO DRILL
20 n 51149 Ø
3/4”
NO DRILL
07-10
n 06378 Ø,AI
3/4”
NO DRILL
90 n 51149 Ø,AI
3/4”
Liberty
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
3.5 5.5 45
3/4”
n 37042 –
n 88001 –
3/4”, 13/16”, NO DRILL
7/8”
n 51149 Ø
n 51085 Ø,GP
n 51010 Ø
Grand Cherokee
n 33002 –
74206
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
6
7/16", 1/2" 40
15, 18, 21mm,
9/16", 11/16",
3/4", T50
3/4”
n 88001 –
1/4”, 1/2”, 5
9/16”
NO DRILL
15 n 51059 Ø
18, 19mm
NO DRILL
3.5 5 15
n 33018 Ø,EP
18, 19mm,
9/16”
18, 19mm
GC,JM
NO DRILL
5
7.5 75
74889
78104
GC
–
NO DRILL
3.5 5 20
5 7.5 75
74889
78104
GC
85253
n 44092 Ø
n 33095 Ø
18, 19mm,
9/16”
18, 19mm
NO DRILL
NO DRILL
3/4”
NO DRILL
3.5 5 20
5 7.5 20
78031
78013
BN,CG
85253
7.5 90
n 33095 Ø,AI
3/4”
NO DRILL
5
7.5 90
78031
78013
BN,CG
85253
5
7.5 20
n 33095 Ø
3/4”
NO DRILL
5
7.5 20
74702
78104
BN
85253
NO DRILL
5
7.5 90
n 33095 Ø,AI
3/4”
NO DRILL
5
7.5 90
74702
78104
BN
85253
11-13
n 51195 Ø,GP
21mm
NO DRILL
5
7.5 20
n 44650 Ø,GP
21mm
NO DRILL
5
7.5 20
74702
78104
BN
85219
11-12
n 51195 Ø,AI,GP
21mm
NO DRILL
5
7.5 40
n 44650 Ø,AI,GP
21mm
NO DRILL
5
7.5 40
74702
78104
BN
85219
18, 19mm
NO DRILL
3.5 5 20
18, 19mm
NO DRILL
78013
GC
–
NO DRILL
NO DRILL
85750
78104
CH
–
n 44082 Ø,GP
18, 19mm,
9/16”
18, 19mm
3.5 5
3.5 5
4 5
–
18, 19mm
7.5 20
n 33006 Ø
n 44093 Ø
n 37053 Ø,GP
NO DRILL
5
n 06081 Ø
1993
n 06971 Ø,GP
02-07
18, 19mm
18, 19mm
1/2”
NO DRILL
30 n 51010 Ø
15 n 51054 Ø,GP
n 37152 –
n 37042 –
n 88001 –
06996
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 35
5
18, 19mm
NO DRILL
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 35
45
20
20
7.5 20
85254
HG
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Commander
Compass
Compass
Compass Rallye Edition
Grand Cherokee
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
18mm, 3/4”,
13/16”,
7/8”
WIRING
STANDARD WIRE
30 n 37152 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
9/16”, 3/4”, 7/8”, NO DRILL
various metric
CLASS V
T-CONNECTOR
n 06954 Ø,GP
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
97-01
Cherokee
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
215
JEEP
JEEP
214
REESE TOWPOWER
n 06529 Ø,HM
n 06529 Ø,HM
2008
09-12
19mm
NO DRILL
19mm
NO DRILL
2007
n 06428 Ø,GP
16mm, 15/ 16”
5/8”
15 n 51085 Ø,GP
Patriot
08-10
n 06428 Ø,GP
16mm, 15/ 16”
5/8”
15 n 51085 Ø,GP
16mm,
5/8”
15/16”
16mm, 15/16” 5/8”
15
n 44555 Ø,GP
3.5
15
n
n
n
l
l
l
l
n
11-12
1997
5/8”
5/8”, 3/4”
NO DRILL
n 06428 Ø,GP
15 n 06021 Ø
16mm, 15/ 16”
n 77016 Ø,DA
5/8”, 3/4”
NO DRILL
15
15 l 51145 Ø,RT,HM
5/8”, 34”
NO DRILL
4
15
TJ Canada
98-06
n 77016 Ø,DA
5/8”, 3/4”
NO DRILL
15 n 06021 Ø
5/8”, 3/4”
NO DRILL
15 l 51145 Ø,RT,HM
5/8”, 34”
NO DRILL
4
15
n 06954 Ø,GP
84-90
9/16”, 3/4”, 7/8” NO DRILL
30 n 51001 –
13/16”, 7/8”
3.5 5 40
44555
44661
44661
33036
44565
33036
44565
33002
18, 19mm
NO DRILL
18, 19mm
NO DRILL
5
5
7.5 20
7.5 20
3.5
15
Ø,GP
Ø,EP,GP,TU
16,22mm
3.5
3.5
3.5
4
4
4
4
3.5 5.5
15
15
15
15
15
15
15
45
3.5 5
40
Ø,EP,GP,TU
16,22mm
NO DRILL
Ø,HM,TD
5/8”, 3/4”
NO DRILL
Ø,HM
5/8”, 3/4”
NO DRILL
Ø,HM,TD
5/8”, 3/4”
NO DRILL
Ø,HM
5/8”, 3/4”
NO DRILL
–
3/4”, 13/16”, NO DRILL
7/8”
n 44088 –
13/16”, 3/4”
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. DISTRIB.
INSTALL TIME
78017
78017
74682,
85262
74705
78104
78104
78058
–
85219
85219
–
78104
BN,CH
–
85775
78104
BO
–
85775
74489
78104
78058
CH
BN
–
–
74223
78058
BN
–
–
78013
–
–
BN,CH
BN,CH
Wrangler
87-90
n 77003 –
10, 13, 17mm,
9/16”, 5/8”
3/8”
30
–
78058
–
–
Wrangler All, Except Renegade
Wrangler All, Inc. Renegade
91-95
91-95
3/8”
30
78058
78058
BN
–
–
Wrangler
1997
n 77016 Ø,DA
10, 13, 17mm,
9/16”, 5/8”
5/8”, 3/4”
74489
74489
BN
n 77003 –
NO DRILL
15 n 06021 Ø
74489
78058
BN
–
74223
78058
BN
–
78058
78058
78058
78058
BN
–
–
–
–
–
BN
–
–
–
–
–
–
–
–
–
–
–
–
–
Wrangler All, Inc. Unlimited
98-06
n 77016 Ø,DA
5/8”, 3/4”
NO DRILL
15 n 06021 Ø
5/8”, 3/4”
5/8”, 3/4”
NO DRILL
NO DRILL
15 l 51145 Ø,RT,HM
98-06
07-12
07-12
87-90
n 77003 –
YJ Canada
91-95
n 77003 –
KIA
Amanti
Amanti
Forte 4 Dr. Sedan, All Models
Magentis Canada Only
Magentis Canada Only
Optima
Optima New Body Style (App. starts with 2006-1/2)
Optima
Optima, All, Incl. LX & EX
Rio All, Inc. Cinco
Rio 4 Dr. Sedan
Rio 4 Dr. Sedan EX
Rio 4 Dr. Sedan LX
Rio 4 Dr. Sedan SX
Rio 5 Dr. Hatchback Only
Rio 5 Dr. Hatchback Only
Rondo
Sedona
Sedona 118.9 Long Wheelbase Only
Sedona 113.8 Short Wheelbase Only
Sorento
Sorento
Sorento, Base I4
Sorento, EX I4
Sorento, EX V6 w/ Factory Tow Package
04-06
07-09
10-13
01-04
06-10
01-06
06-08
09-10
11-13
02-05
06-11
2012
2012
2012
06-11
12-13
07-10
02-05
06-12
07-10
03-06
07-09
11-13
11-13
11-13
n 77154 Ø,HM,JR
n
n
n
n
n
n
n
n
n
n
n
77154
77154
77225
77044
77136
77272
77272
77272
77167
77270
77169
17mm, 11/16”
17mm, 3/4”
5/8”, 34”
NO DRILL
4
3/4”
NO DRILL
3/4”
NO DRILL
3.5 4 20
3.5 4 20
l
l
l
l
33036
44565
33036
44565
Ø,HM,TD
5/8”, 3/4”
NO DRILL
Ø,HM
5/8”, 3/4”
NO DRILL
Ø,HM,TD
5/8”, 3/4”
NO DRILL
Ø,HM
5/8”, 3/4”
NO DRILL
3/4”
NO DRILL
3/4”
NO DRILL
4
4
4
4
15
15
15
15
3.5 4
3.5 4
20
20
15
30
3/8”
30
74489
78058
–
78011
74692
–
–
–
78065
74710
78011
–
–
78013
78013
78013
78013
78013
78013
78013
78013
78013
78013
78013
–
78013
NO DRILL
NO DRILL
3/4”
NO DRILL
NO DRILL
Ø,HM,JR
17mm, 3/4”
NO DRILL
Ø,HM,JR
17mm, 3/4”
NO DRILL
Ø,HM,JR,KH
10, 13mm, 11/16” NO DRILL
TA
3/4”
1/2”
Ø
19mm
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,HM
11/16”
NO DRILL
Ø,HM
11/16”
NO DRILL
NO DRILL
Ø,JR,X
17, 19mm
Ø,GP,JR,SV
10mm, 11/16”, 3/4” NO DRILL
Ø,GP,JR
10, 12, 13, 14, 17mm NO DRILL
20 n 51077 Ø
20 n 51077 Ø
n 44557 Ø
n 44557 Ø
40
20
20
20
20
20
30
20
20
15
15
15
25
30
30
BN
BN
–
CG
–
–
–
CG
CG
HG
–
–
–
B,LD
n 06029 –
06996
15
3/8”
3/4”
n 06396 Ø,HM,JR,SC 10, 12, 13, 17mm NO DRILL
n 06607 Ø,HM,JR 10, 12, 17mm, 11/16” NO DRILL
n 77234 Ø,HM,JR
4
74223
74693
74693
–
l 06448 Ø
l 06448 Ø
10, 13, 17mm,
9/16”, 5/8”
10, 13, 17mm,
9/16”, 5/8”
NO DRILL
15
l 51145 Ø,RT,HM
Wrangler Except Unlimited
Wrangler Unlimited, 4 Dr.
Wrangler
YJ Canada
5/8”, 34”
17, 18mm, 7/8”
1/2”
20
l
l
16mm
NO DRILL 15 n
n 06133 Ø,HM
16mm
NO DRILL 15 n
n 06133 Ø,HM
16mm
NO DRILL 15 n
n 06133 Ø,HM
51082
51082
51206
51206
51206
Ø,RT,HM
19mm
NO DRILL
Ø,RT,HM
19mm
NO DRILL
Ø, HM
16mm
NO DRILL
Ø, HM
16mm
NO DRILL
Ø, HM
16mm
NO DRILL
5
5
3.5
3.5
3.5
5
5
5
5
5
15
15
15
15
15
n
n
n
l
l
n
n
n
33062
44537
44578
44558
44558
44639
44639
44639
–
17, 18mm, 7/8” 1/2”
Ø,JR
19mm
HM,JR
12, 17mm, 3/4” 3/8”
NO DRILL
Ø,HM
19mm
NO DRILL
Ø,HM
19mm
NO DRILL
Ø,HM
16mm
NO DRILL
Ø,HM
16mm
NO DRILL
Ø,HM
16mm
NO DRILL
5
3.5
3.5
5
5
3.5
3.5
3.5
5.5
4
4
5
5
5
5
5
30
20
25
15
15
15
15
15
74708
85266
78046
78046
85317
74706
85726
85726
85760
78013
78013
78104
78104
78013
78104
–
–
–
–
HG
BN,CH
BN,CH
BN,HG
–
CH
CH
BN,CH
–
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
217
APPLICATIONS GUIDE
NO DRILL
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
3.5
Patriot
TJ Canada
Wagoneer Downsize, All Models (Will
Not Fit Grand Wagoneer)
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 44585 Ø,HM
l 44585 Ø,HM
15
15
Patriot
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
Liberty
Liberty
APPLICATIONS GUIDE
REESE TOWPOWER
JEEP - KIA
JEEP - KIA
216
REESE TOWPOWER
LEXUS
NO DRILL
NO DRILL
16mm
NO DRILL
16mm
NO DRILL
Ø, HM
16mm
NO DRILL
Ø, HM
16mm
NO DRILL
02-03
10mm, 19mm
NO DRILL
14, 17mm
NO DRILL
14, 17mm
NO DRILL
04-06
03-09
HS 250h Hybrid
LX 450
LX 470
LX 470
LX 470
LX 470
RX 300
RX 300
RX 330 All, Inc. Models w/18 Spare Tire
RX 350
RX 350
10-11
96-97
98-99
2000
01-02
03-07
99-00
01-03
04-06
07-09
10-13
06264
06264
06339
51180
06339
51180
06994
06132
HM
17mm, 3/4”
1/2”
HM
17mm, 3/4”
1/2”
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP.JR
13, 14, 17mm
NO DRILL
Ø,GP, †
16mm
NO DRILL
Ø,GP.JR
16mm
NO DRILL
20
20
25
25
25
25
15
20
n 44666 O,GP,JR
16mm
3.5 5.2 20
85751
78104
B,E
–
n 33064 –
n 33064 –
n 44640 Ø,HM
3.5
3.5
4 4
–
–
–
78104
78104
78104
–
13, 17mm, 3/4” 1/2”
–
–
–
–
40
30
30 n
n
n
n
n
n
–
–
–
–
78104
78104
78104
78104
–
–
–
–
–
06326
51178
06326
51178
06326
51178
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
–
78104
–
–
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
–
78104
–
–
85740
74682
–
–
85262
78104
–
BO
–
–
–
85728
74208
74225
–
–
–
–
–
78106
78106
78106
–
78013
78013
78104
78104
78104
78104
78104
78104
78104
78104
–
–
85708
78104
78104
–
l 44548 Ø,LT,SI
NO DRILL
14, 17mm
NO DRILL
14, 17mm
NO DRILL
15 l 51153
15 l 51153
l 51155
l 51155
Ø,HM
14, 17mm
NO DRILL
Ø,HM
14, 17mm
NO DRILL
Ø,RT
14, 17mm
NO DRILL
Ø,RT
14, 17mm
NO DRILL
l 51155 Ø,RT
06996
22mm,
NO DRILL
11/16”, 5/8”
20
20
20
19mm
NO DRILL
5
5
15
10, 12, 13, NO DRILL
17mm, 3/4”,
1/2”
6
7.3 35
17, 18mm
5
5
5
5
5
3.5
3.5
3.5
3.5
4
6
6
6
6
6
5
30
20
20
20
20
15
15
20
20
30
4
5
30
3.5
4 5
20
30
25
n 06276 Ø
n 06276 Ø
06-09
10-12
13, 17mm, 3/4” 1/2”
15
15
15
15
15
15
n 44644 Ø
n 77237 Ø,HM,JR,KH 10, 17, 19mm
NO DRILL
14, 17mm
NO DRILL
3.5
3.5
3.5
3.5
3.5
15
15
20
20
20
n
n
n
n
n
l
l
l
l
n
33066
44546
44546
44546
44546
44076
44076
33075
33075
44633
Ø
NO DRILL
Ø
12, 19mm, 7/8” NO DRILL
Ø
12, 19mm, 7/8” NO DRILL
Ø
12, 19mm, 7/8” NO DRILL
Ø
12, 19mm, 7/8” NO DRILL
Ø,HM
14, 17mm
NO DRILL
Ø,HM
14, 17mm
NO DRILL
Ø
14, 17mm
NO DRILL
Ø
14, 17mm
NO DRILL
Ø,GP,JR,JV
10, 12, 14, 17, NO DRILL
19mm
n 44627 Ø,†,GP,JR,JV 10, 12, 14, 17, NO DRILL
19mm
14, 17mm NO DRILL
l 33075 Ø
n 44633 Ø,GP,JR,JV 10, 12, 14, 17, NO DRILL
19mm
OEM REPLACE.
–
FOOTNOTES
BN,CG
WT. DISTRIB.
INSTALL TIME
78013
NO DRILL
NO DRILL
15
15
15
15
WT. CARRYING
78038
16mm
16mm
5
5
5
5
DRILL BITS
25
Ø,HM
Ø,HM
3.5
3.5
3.5
3.5
WRENCHES
3.5
NO DRILL
NO DRILL
FOOTNOTES
16mm
16mm
HITCH
NUMBER
n 44582 Ø,GP.JR
Ø,HM
Ø,HM
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
25
DRILL BITS
3.5
44639
44639
44639
44639
15
15
15
15
10-12
GX 470
–
–
–
–
–
78013
78104
78104
–
n
n
n
n
5
5
5
5
40
20
n
n
n
n
n
n
n
n
l 77102 EP
n 77004 Ø
n 77004 Ø
n 44582 Ø,GP.JR
85726
85726
85726
85760
74708
–
–
74895
–
3.5
3.5
3.5
3.5
WRENCHES
DRILL BITS
WRENCHES
FOOTNOTES
Ø, HM
Ø, HM
HITCH
NUMBER
16mm
16mm
51206
51206
51206
51206
n
n
n
n
STYLE
Ø,HM
Ø,HM
15
15
15
15
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
NO DRILL
NO DRILL
HITCH
NUMBER
16mm
16mm
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
HITCH
NUMBER
Ø,HM
Ø,HM
02-03
04-05
08-12
ES 300 4 Dr.
RX 400h Hybrid
RX 450h Hybrid
NO DRILL
NO DRILL
11-13
90-91
90-91
92-96
97-01
GX 460
17mm
14, 17mm, 7/8”
05-10
250
250 FWD
300 4 Dr.
300 4 Dr.
ES 330 4 Dr.
n 77230 Ø,GP,JR
n 77099 Ø,JR
06133
06133
06133
06133
STANDARD WIRE
ES
ES
ES
ES
n
n
n
n
WIRING
–
–
–
–
–
–
–
–
–
–
CH
CH
CH
BN,CH
BN,CG
–
–
HG
–
–
–
–
–
CH
BN,HG
BN,HG
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
219
APPLICATIONS GUIDE
LAND ROVER
Freelander
Freelander
LR2
11-13
11-13
11-13
11-13
10-13
05-09
95-97
98-02
05-10
CLASS V
T-CONNECTOR
Sportage
YEAR
MODEL
Sorento, EX V6 w/o Factory Tow Package
Sorento, LX I4
Sorento, LX V6
Sorento SX V6
Soul
Spectra Except Spectra5
Sportage 2 & 4 Dr.
Sportage 2 & 4 Dr.
Sportage 4 Cyl. Models
CLASS III/IV
CLASS III
FOOTNOTES
CLASS II
CLASS I
Sportage 6 Cyl. Models
APPLICATIONS GUIDE
REESE TOWPOWER
KIA - LEXUS
KIA - LEXUS
218
REESE TOWPOWER
REESE TOWPOWER
Continental
98-02
n 77017 Ø,JR
n 77017 Ø,JR
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
20 n
n
20 n
n
n
n
06368
88002
06368
88002
06393
06393
10, 13, 15mm, 3/4” NO DRILL
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
–
11/16”
7/16”
FE
11/16”
7/16”
Mark VIII
93-98
25 n 06043 CA
n 88002 –
n 06004 Ø,JR
MKS
09-13
n 06663 Ø,JR
MKT All Models
10-13
MKX
07-10
MKX
11-13
MKZ
MKZ
Navigator
07-09
10-12
98-02
80-89
90-02
3/4”
1/2”
n 06525 Ø,GP,JR,KH
n 77152 GP,JR,TA
n 77239 Ø
12, 13mm, 3/4”
1/2”
11/16”
NO DRILL
13mm, 3/4”
1/2”
3/4”
1/2”
3/4”, 7/8”
10, 13, 18, 19mm, NO DRILL
11/16”, 3/4”
5.5, 8mm, 3/4”
NO DRILL
n 77002 CA,HA
3/4”
3/4”
1/2”
1/2”
5
8
8
–
–
85251
85251
74682
–
–
78058
LS
LS
BO
–
–
85219
–
–
–
85727
–
–
78058
CH, BO
–
85219
–
–
78104
–
–
78095
78104
CH
–
30
85727
78104
CH
–
CH, BO
20
7/16”
5
10 30
7/8”
6
13/16”, 7/8” NO DRILL
5 8 20
3.5 6 30
13mm, 3/4” 1/2”
10 20
l
l
l
l
n
33077
37090
44131
44655
44552
Ø,HM
3/4”
7/16”
Ø
3/4”
7/16”
Ø
3/4”
7/16”
HM
3/4”
7/16”
Ø,CP
7/8”
n 33047 CA,GP
13mm, 3/4”
1/2”
6
6
5
6
6
8
10
10
8
10
3.5 6
30
30
30
30
20 n 41933 Ø,@,CP,HM, 3/4”, 7/8”
†
n 96933 Ø,@,CP,HM 3/4”, 7/8”
30
30
06043
88002
06043
88002
06043
06043
88002
CA
13mm, 3/4”
1/2”
45
85727
85774
–
78104
CH
85219
–
3.5 4
45
85746
78104
CH
–
85731
85766
74665
74665
78104
78104
78058
78058
CH
BN, BO
–
–
–
85219
n 51200 CP,GP,JR,KH 5.5, 8mm, 3/4” 1/2”
4
0
55
n 44658 Ø,GP,JR,KH 5.5mm or 7/32”, NO DRILL
–
3/4”
1/2”
CA,HA
13mm, 3/4”
1/2”
–
3/4”
1/2”
30
35
30
35
30
30
35
n 51103 AB,CA,GP
13mm, 3/4” 1/2”
12 20
3.5
n 44567 Ø, CP, GP,
JR, KH
8mm, 3/4”
4
45
20
25 n
n
25 n
n
n
25 n
n
45
10
5.5, 8mm, 3/4” NO DRILL
55
3/4”, 7/8”
n 44032 Ø,HM
7/8”, 3/4”
3.5 6 30
n 44622 Ø,GP
n 33047 AB,CA,GP
n 51103 AB,CA,EO,GP,HA 13mm, 3/4” 1/2”
3.5 6 30
n 51103 AB,CA,EO,GP,HA 13mm, 3/4” 1/2”
n 51103 AB,CA,GP 13mm, 3/4” 1/2”
3.5 6 30
3.5 6 30
10 15
NO DRILL
4
0
5
12 20 –
18, 19mm, 6” NO DRILL
ratchet
4
7/8”
10
85219
models w/ Tow 85219
Package only
BO
85219
l 44636 Ø,HM,JR
45 n 51200 CP,GP,JR,KH 5.5, 8mm, 3/4” 1/2”
n 51024 Ø,HM
NO DRILL
BO
OEM REPLACE.
78104
20
FOOTNOTES
–
WT. DISTRIB.
INSTALL TIME
78104
WT. CARRYING
–
models w/ Tow 85219
Package only
–
–
DRILL BITS
78058
78058
WRENCHES
–
74682
FOOTNOTES
78058
78058
HITCH
NUMBER
74665
74682
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
n 51096 Ø,CP,HM
30 n 51103 CA,GP
35
40
3/4”
n 33052 Ø,GP
n 77002 CA
15, 18mm, 7/8” NO DRILL
5
NO DRILL
5
8
20
CH
BN
NO DRILL
5
10 20
7/8”, 3/4”
NO DRILL
13mm, 3/4”
1/2”
6 10 15
3.5 6 30
–
78104
–
–
n 33047 AB,CA,EO,GP,HA 13mm, 3/4” 1/2”
3.5 6
30
–
78104
–
–
n 33047 AB,CA,EO,GP,HA 13mm, 3/4” 1/2”
n 33047 AB,CA,GP 13mm, 3/4” 1/2”
3.5 6
3.5 6
30
30
–
–
78104
78104
–
–
–
–
–
78104
–
–
CH
Town Car
Town Coupe
03-10
80-89
n 77002 CA,HA
3/4”
1/2”
Zephyr
2006
n 77152 GP,JR,TA
12, 13mm, 3/4”
1/2”
2
3 4 Dr. Sedan, Except Models with Grand Touring
LED Taillights Package
3 5 Dr. Hatchback, Except Models with Grand
Touring LED Taillights Package
3 4 Dr. Sedan, Models with Grand Touring LED
Taillights Package
3 5 Dr. Hatchback, Models with Grand Touring LED
Taillights Package
3 4 Dr. Sedan, Except Models with Grand Touring
LED Taillights Package
11-13
04-09
77252 Ø,GP,JR
n 77188 GP
10mm, 7/16"11/16" NO DRILL
11/16”
1/2”
30
35
85754
74697
78104
78013
CG
–
–
04-09
n 77188 GP
11/16”
1/2”
35
74697
78013
CG
–
06-09
n 77188 GP
11/16”
1/2”
35
–
78013
–
–
06-09
n 77188 GP
11/16”
1/2”
35
–
78013
–
–
10-12
n 77244 Ø,GP
10mm, 11/16”,
9/16”
NO DRILL
20
74697
78013
CG
–
MAZDA
06996
CA,HA
13mm, 3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
JT 2WD models only.
APPLICATIONS GUIDE
n 51075 Ø,CP
06-08
n 77002 CA
15, 18mm, 7/8” NO DRILL
WIRING
20
40
20
40
20
30
l 51064 Ø,RT
80-83
Town Car
DRILL BITS
Ø,GP,JR
–
Mark VI, All Styles
Town Car
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 33031 Ø,KL
2005
00-02
LS
03-06
LS
Mark LT Built Before 8/2005 w/ Factory 7-Way 2006
Mark LT Built After 8/2005
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
l 33031 Ø,KL
03-04
88-97
CLASS V
STANDARD WIRE
Aviator
CLASS III/IV
CLASS III
T-CONNECTOR
Aviator
YEAR
MODEL
LINCOLN
Continental
APPLICATIONS GUIDE
CLASS II
CLASS I
221
LINCOLN - MAZDA
LINCOLN - MAZDA
220
REESE TOWPOWER
REESE TOWPOWER
CX-5
CX-7
2013
07-12
CX-9
Millenia
MPV Van
MPV Van
MPV Van
MPV Van
Navajo
2 & 4 WD
w/Ground Effects
w/o Ground Effects
All Models
Pickup B-Series All Models
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
10mm, 11/16”,
9/16”
NO DRILL
20
–
78013
–
–
10-12
n 77245 Ø,GP
11/16”, 9/16”
NO DRILL
15
74697
78013
CG
–
10-12
n 77245 Ø,GP
11/16”, 9/16”
NO DRILL
15
–
78013
–
–
06-10
2012
03-08
04-07
04-08
09-13
98-02
n
n
n
n
n
n
n
85754
85754
85701
–
85701
78112
–
78104
78104
78104
78104
78104
78104
78013
CH
–
–
–
–
–
–
–
85701
78061
85754
–
–
–
–
–
74190
78104
78104
78104
78104
78104
78104
78104
78104
78058
BN
–
78061
–
–
–
–
–
–
–
–
78013
–
–
78013
BN,HG
–
77150
77246
77152
77159
77152
77205
77021
GP
GP
GP,JR,TA
Ø,TA
GP,JR,TA
GP,JR
JR
25
25
12, 13mm, 3/4” 1/2”
45
11/16”
NO DRILL 25
12, 13mm, 3/4” 1/2”
45
11/16”
1-1/8” hole saw 30
3/4”, 7/8”
1/2”, 1” hole 30
11/16”, 3/4”
1/2”
11/16”, 3/4”
3/8”
saw
n 06401 Ø,GP,JR
11/16”
NO DRILL
n 44677 Ø,GP,JR
l 44554 Ø,GP,JR
40
l 44572 Ø,HM
07-12
95-02
96-98
00-03
00-03
04-06
91-94
n 06134 AI
n 06068 Ø,JR
n 06365 –
10mm, 11/16”
7/16”
17mm, 3/4”, 7/8” NO DRILL
13/16”, 7/8”,
15/16”
1/2”
n 44617 –
n 44553 Ø,HM,JR
7/8”
n 51092 Ø,RT,HM,JR 17mm, 3/4”, 7/8” NO DRILL
3/4”, 13/16” 1/2”
15 l 37051 –
3.5 5 20
5 6 25
n 44553 Ø,HM,JR
l 33051 –
17mm, 7/8”, 3/4” NO DRILL
n 37041 –
3/4”, 13/16” 1/2”
5
6
25
l 44067 –
n 51033 –
15, 18,
21mm, 3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
5
6 20
n 44100 –
NO DRILL
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
18,19mm,
3/4”, 7/8”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/2”
3.5 5 20
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 33058 EG,SD
n 44101 EG
1/2”, 3/8”
17mm, 7/8”, 3/4” NO DRILL
3.5 5
3.5 5
50
20
3.5 5
5 6
20
20
13/16”, 7/8”, 1/2”
15/16”
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16”
5
6
45
5
6
20
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
4
6
20
1/2”
3.5 5
20
n 37152 Ø
98-01
74424
74424
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 SD,V
n 44101 V
n 37042 Ø
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
4
6
20
1/2”
3.5 5
20
7/16", 1/2" 35
CH
–
CH
CH
–
CH
BO
CH
–
–
–
–
–
HG
74424
78013
BN,HG
74885
74424
78013
BN,HG
74885
74424
n 51032 V
18,19mm,
3/4”, 7/8”
1/2”
3.5 5 20
n 33058 SD,V
n 44101 V
06996
15
–
74672
n 51032 V
99-01
4
7/16", 1/2" 35
1998
15, 18, 21mm,
9/16", 11/16",
3/4", T50
4
40
40
7/16", 1/2" 30
n 51032 EG
n 88001 –
3.5
3.5
15
94-97
15, 18, 21mm,
9/16", 11/16",
3/4", T50
NO DRILL
3.5 5 20
n 37152 –
n 88001 –
19mm
NO DRILL
n 51092 Ø,RT,HM,JR 17mm, 3/4”, 7/8” NO DRILL
90-93
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 3/4” NO DRILL
11/16”
60
n 37042 Ø
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 77244 Ø,GP
n 37152 Ø
WIRING
10-12
n 88001 –
CLASS V
n 37042 –
CLASS III/IV
CLASS III
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
1/2”
4
6
20
1/2”
3.5 5
20
74424
HG
78013
BN,HG
74885
JT 2WD models only.
APPLICATIONS GUIDE
3 4 Dr. Sedan, Models with Grand Touring LED
Taillights Package
3 5 Dr. Hatchback, Except Models with Grand
Touring LED Taillights Package
3 5 Dr. Hatchback, Models with Grand Touring LED
Taillights Package
5
5
6 4 Dr. Sedan
6 Sport Wagon
6 5 Dr. Hatchback
6 4 Dr. Sedan
626
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
223
MAZDA
MAZDA
222
REESE TOWPOWER
REESE TOWPOWER
n 37152 Ø
n 37042 Ø
n 88001 –
95-98
99-03
02-03
01-02
n 77241 †,JR
n 77080 Ø
n 77119 Ø,JR
3/4” 7/8”
1/2”
3/4”, 7/8”, 11/16”
NO DRILL
14mm, 11/16”
NO DRILL
l 51142 Ø,RT,KH
15, 18, 21mm,
9/16", 11/16",
3/4", T50
l 51142 Ø,RT
n 37042 –
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6.5 40
3.5 5
20
n 37152 –
n 37042 –
n 88001 –
10, 18mm,
11/16”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
3.5 5 35
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 60
l 33039 Ø,KH
10, 18mm,
11/16”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
3.5 5 35
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 60
l 33039 Ø
10, 18mm,
11/16”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
3.5 5 35
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 60
l 33039 Ø
1”, 3/8”
20
l 44647 Ø
n 06417 HM
7/8”
1”, 3/8”
20
l 44680 Ø.HM
n 51191 †,HM
n 51194 HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
20
20
l 97207 Ø, †
l 97232 Ø,HM
1”, 3/8”
10, 18mm, 5/8” NO DRILL
5/8”
3.5 5
3.5 5
NO DRILL
3.5 5
40
10, 18mm,
11/16”
NO DRILL
3.5 5
40
10, 18mm,
11/16”
NO DRILL
3.5 5
40
7/8”
1”, 3/8”
7/8”
1”, 3/8”
7/8”
1”, 3/8”
–
–
–
74664
74664
–
BN,HG
OEM REPLACE.
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
78013
–
HG
78013
78013
–
78013
–
–
–
HG,RW
–
–
–
–
HG,RW
78013
HG,RW
–
HG,RW
78013
–
20
20
20
10, 18mm, 5/8” NO DRILL
10, 18,
NO DRILL
22mm, 5/8”
3.5 5
3.5 5
3.5 5
25
74703
78104
BN, CH
3.5 5.25 25
74702
–
BN,CH
74703
l 44647 Ø
20
l 97207 Ø, †
l 97232 Ø,HM
10, 18mm, NO DRILL
5/8”
5/8”
25
25
l 44680 Ø.HM
n 06417 HM
n 51191 †,HM
n 51194 HM
74424
–
74672
n 06417 †,HM
7/8”
10, 18mm,
11/16”
7/16", 1/2" 60
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/8”
n 06417 †,HM
STANDARD WIRE
1/2”
T-CONNECTOR
20
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
6
74664
l 51142 Ø,RT
06996
WRENCHES
STYLE
FOOTNOTES
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/4”, 1/2”, 5
9/16”
4
7/16", 1/2" 60
2004
08-11
6
1/2”
74664
n 37152 –
Tribute All, Inc. Hybrid
n 44101 V
1/4”, 1/2”, 5
9/16”
18, 19mm,
7/8”
18,19mm,
3/4”, 7/8”
7/16", 1/2" 60
2003
05-06
n 33058 SD,V
40
20
15
n 88001 KH
Tribute
3.5 5 20
74424
n 37042 KH
Tribute
1/2”
7/16", 1/2" 35
n 37152 KH
Tribute
18,19mm,
3/4”, 7/8”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
WIRING
25
25
10, 18mm, NO DRILL
5/8”
5/8”
3.5 5
–
BN,CH
25
85774
78058
CH
78070
3.5 5.25 25
85774
–
CH
–
78070
78058
BO
–
85774
85774
–
CH
CH
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Protege All Models
Protege All Models
Protege 5
Tribute
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 51032 V
02-09
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
225
MAZDA
MAZDA
224
REESE TOWPOWER
10-13
98-02
l 44649 Ø,HM
n 33027 Ø
ML320 CDI
ML350
07-08
03-05
l 44534 MB,TA
n 33027 Ø
ML350
ML350 Except Blue Tec
ML350, All Styles
ML430
06-09
10-11
12-13
99-01
l
l
n
n
ML450 Hybrid, All Styles
ML500
10-11
02-05
l 44534 MB,TA
n 33027 Ø
ML500
ML550
R320 BlueTEC
R320 BlueTEC
w/Panoramic Roof Package
R320 CDI
R320 CDI w/Panoramic Roof Package
R350
R350 w/Panoramic Roof Package
R500
R500 w/Panoramic Roof Package
06-07
08-11
2009
2009
l
l
n
n
44534
44534
44547
44547
07-08
07-08
06-12
06-12
06-07
06-07
10-12
n
n
n
n
n
n
n
44547
44547
44547
44547
44547
44547
44576
MERCURY
79-86
l 77060 X
Colony Park Wagon
83-91
n 77002 CA
9/16”, 5/8”,
11/16 In
3/4”
3/8”
20
1/2”
Cougar All Models
89-95
25 n 06043 CA
n 88002 –
n 06004 Ø
Cougar All Models
96-97
n 06004 Ø
Grand Marquis
83-91
Grand Marquis
Grand Marquis
Grand Marquis Wagon
Marauder
Mariner All, Inc. Hybrid
92-97
98-11
83-91
03-04
05-07
n 77002 CA
n 77002 CA
n 77002 CA
n 77002 CA
n 77002 CA
3/4”
3/4”
3/4”
3/4”
3/4”
1/2”
1/2”
1/2”
1/2”
1/2”
25 n
n
25 n
n
25 n
n
25 n
n
25 n
n
06043
88002
06043
88002
06043
88002
06043
88002
06043
06417
06996
MB,TA
10mm, 16mm, 3/4” NO DRILL
Ø,GP,JR
10mm, 11/16”
Ø
10, 21mm, 3/4”, NO DRILL
11/16”, 9/16”
NO DRILL
MB,TA
10, 21mm, 3/4”, NO DRILL
11/16”, 9/16”
MB,TA
Ø,SC
SC
Ø,SC
SC
Ø,SC
SC
Ø,SC
SC
Ø,HM
18, 19mm
NO DRILL
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
MB,TA
10, 21mm, 3/4”, NO DRILL
11/16”, 9/16”
4
5
5
20
30
–
–
78113
78113
–
3.5 4
5 5
50
30
–
–
78113
78113
–
3.5
3.5
3.5
5
4
4
4
5
50
50
30
30
–
–
78113
78113
–
–
–
–
78113
–
–
3.5 4
5 5
50
30
–
–
78113
78113
–
–
–
–
3.5 4
3.5 4
3.5
3.5
50
50
25
50
–
–
–
–
78113
78113
78113
78113
3.5
3.5
3.5
3.5
3.5
3.5
6 7.5
25
50
25
50
25
50
20
–
–
–
–
–
–
78113
78113
78113
78113
78113
78113
–
–
–
–
–
–
–
–
78104
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
78058
–
–
NO DRILL
–
78058
–
–
NO DRILL
40
–
78058
–
–
1/2”
CA
13mm, 11/16”,
3/4”, 7/8”
13mm, 11/16”,
3/4”, 7/8”
13mm, 3/4”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
†,HM
7/8”
1”, 3/8”
30
35
30
35
30
35
30
35
30
20
n 06417 HM
7/8”
1”, 3/8”
20
n 51191 †,HM
n 51194 HM
7/8”
1”, 3/8”
7/8”
1”, 3/8”
20
20
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
CA
13mm, 3/4”
1/2”
–
3/4”
1/2”
n 06417 †,HM
n 51191 †,HM
NO DRILL
10, 21mm, 3/4”, NO DRILL
11/16”, 9/16”
–
1/2”
1/2”
n 51103 CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78058
–
–
n 51103 CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
74428
78104
–
–
n 51103 CA,GP
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
13mm, 3/4”
1/2”
3.5 6
30
–
78104
–
–
–
78058
–
–
–
–
78104
78104
–
CH
–
–
85774
–
CH
–
n 51103 CA,GP
7/8”
1”, 3/8”
7/8”
1”, 3/8”
13mm, 3/4” 1/2”
3.5 6 30
n 33047 CA,GP
l 44647 Ø
l 44680 Ø.HM
l 97232 Ø,HM
08-09
7/8”, 3/4”
WIRING
30
35
40
13mm, 3/4”
3/4”
l 97207 Ø, †
44534
44534
44678
33027
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
GLK350 All Models
ML320
Capri
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
MERCEDESBENZ
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
20
20
10, 18mm, NO DRILL
5/8”
10, 18,
NO DRILL
22mm, 5/8”
13mm, 3/4”
1/2”
10, 18mm, NO DRILL
5/8”
5/8”
3.5 6
3.5 5
30
25
3.5 5.25 25
3.5 5
25
85774
3.5 5
25
85774
–
85774
78070
78058
78058
CH
CH
–
CH
78070
Factory Tow –
Package
models only
JT 2WD models only.
227
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
MERCEDES-BENZ - MERCURY
MERCEDES-BENZ - MERCURY
226
REESE TOWPOWER
REESE TOWPOWER
l 44647 Ø
20
l 44680 Ø.HM
n 51194 HM
7/8”
1”, 3/8”
n
n
n
n
77002
77002
77152
77239
Monterey Sedan
Monterey Van
Mountaineer
79-82
04-07
97-01
n 77002 CA
CA
3/4”
1/2”
CA
3/4”
1/2”
GP,JR,TA
12, 13mm, 3/4”
1/2”
Ø,GP,JR
11/16”
NO DRILL
3/4”
1/2”
25 n 06043 CA
25 n 06043 CA
45
20
n 06301 Ø,GP,JR
n
25 n
n
n
51179
06043
06989
06365
13mm, 3/4”
1/2”
13mm, 3/4”
1/2”
30 n 51103 CA,GP
30
10, 13, 15mm, 3/4” NO DRILL
30
30
30 n 51103 CA,GP
25
15 l 37051 Ø,JF
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
CA
13mm, 3/4”
1/2”
Ø,JR
7/8”
NO DRILL
Ø
13/16”, 7/8”,
15/16”
1/2”
n 37041 Ø,JF
n 51033 Ø
10, 18mm, NO DRILL
5/8”
10, 18,
NO DRILL
22mm, 5/8”
13mm, 3/4” 1/2”
13mm, 3/4” 1/2”
3.5 5
25
Sable Sedan, All Models
Sable Wagon
Sable Wagon
Sable Wagon
Sable Wagon
Sable Wagon
02-03
04-05
06-07
08-10
95-00
86-91
92-95
96-99
00-03
n 77009 –
n 77017 Ø,JR,KH
n 77017 Ø,JR
n 77017 Ø,JR
n 77017 Ø,JR
13mm, 3/4”
1/2”
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
04-05
08-09
86-91
92-95
96-99
00-03
n 77017 Ø,JR,KH
n 77017 Ø,JR
n 77017 Ø,JR
n 77017 Ø,JR
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
10, 13, 15mm, 3/4” NO DRILL
30
20 n
n
20 n
n
20 n
n
20 n
n
n
n
n
n
06368
88002
06368
88002
06368
88002
06368
06991
51101
06991
51101
06991
n
n
n
n
n
n
n
n
n
n
n
n
n
06301
51179
06368
88002
06368
88002
06368
88002
06368
06991
51101
06991
51101
20
20
20
20
04-05
Tracer All Models
91-96
n 77018 –
Tracer Sedan
1997
n 77018 –
06996
9/16”, 11/16”,
13/16”
9/16”, 11/16”,
13/16”
Ø,GP,JR,KH
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR,KH
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
–
3/4”
1/2”
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
Ø,GP,JR
10, 13, 15mm, 3/4” NO DRILL
78070
78058
Factory Tow –
Package
models only
CH
3.5 5
25
3.5 6 30
3.5 6 30
3/4”, 13/16” 1/2”
5
6
3/4”, 13/16” 1/2”
5
5
6 30
6 15
15, 18,
NO DRILL
21mm, 3/4”
30
n 33047 CA,GP
n 44525 Ø,JR
3/4”
3.5 4
30
–
–
85731
85731
–
n 33047 CA,GP
n 44129 GP,JR
l 33051 Ø,JF
13mm, 3/4”
1/2”
3/4”
1/2”
3.5 6
3.5 5
5 6
30
30
20
–
78022
74724
78058
78104
78104
5
5
6
6
40
45
5
6
20
8
8
8
20
20
25
74665
–
74682
78058
78058
78058
8
25
74682
–
–
78058
78058
78104
–
85219
–
–
74670
78058
–
–
74657
78013
HG
–
85243
78058
–
–
–
78013
–
–
78069
78058
–
–
–
78104
–
–
–
78058
–
78013
–
–
–
78058
–
–
–
78058
–
–
n 37012 Ø
l 44067 Ø,JF
20
35
20
35
20
40
20
40
40
40
40
40
30
30
20
35
20
35
20
40
20
40
40
40
40
13mm, 3/4”
1/2”
13/16”, 7/8”, 1/2”
15/16”
3/4”, 15/16” 1/2”
13/16”,
1/2”
7/8”,15/16”
3/4”, 15/16”
15, 18mm, 7/8” NO DRILL
3.5 6
l 33031 Ø,KL
l 33031 Ø,KL
n 44542 Ø,KL
13mm, 3/4”
NO DRILL
5
5
5
n 44542 Ø,KL
13mm, 3/4”
NO DRILL
5
n 44525 Ø,JR
15, 18mm, 7/8” NO DRILL
3/4”
3.5 4
30
30
78058
78058
78104
78104
78104
OEM REPLACE.
–
FOOTNOTES
CH
WT. DISTRIB.
INSTALL TIME
–
WT. CARRYING
85774
DRILL BITS
3.5 5.25 25
WRENCHES
78070
FOOTNOTES
CH
HITCH
NUMBER
78058
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
85774
85774
n 44100 Ø
Mountaineer
Mountaineer
Mountaineer
Models w/1-1/4 Receivers Only
Mountaineer Models w/1-1/4 Receivers Only
Mystique
25
3.5 5
–
–
CH
CH
–
–
CH
BN,GC
BN
–
–
–
–
–
–
–
–
–
–
–
74885
85219
85219
85219
–
9/16”
35
–
78104
–
–
9/16”
35
74665
78058
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
l 97232 Ø,HM
79-82
79-82
06-09
10-11
05-07
10, 18mm, NO DRILL
5/8”
5/8”
20
l 97207 Ø, †
Marquis Sedan
Marquis Wagon
Milan
Milan
Montego
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
1”, 3/8”
WIRING
STANDARD WIRE
7/8”
CLASS V
T-CONNECTOR
n 06417 HM
08-11
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
229
MERCURY
MERCURY
228
REESE TOWPOWER
CLASS II
CLASS I
Tracer Wagon
1997
n 77018 –
Tracer Wagon
98-99
n 77078 †,GP,JR
Villager Mini Van
Villager Mini Van
Villager Mini Van
93-97
1998
99-02
n 77110 EP
n 77110 EP
n 77110 EP
00-05
n 77093 AE
Eclipse
Endeavor
06-12
04-05
n 77130 TA
Endeavor
Galant
Lancer
06-08
07-12
02-03
n 77209 Ø,JR,KH
n 77032 –
Lancer All, Except Evolution,Ralliart &
Models w/Dual Exhaust
08-11
n 77192 Ø,GP
01-06
97-04
03-06
07-10
11-12
11-12
Raider
06-09
RVR, Canada Only
NISSAN
200-SX
Altima
Altima
Altima
Altima 4 Dr. Sedan
Altima 2 Dr. Coupe
Armada
Armada
Cube
Frontier Pickup All, Inc. Desert Runner
10mm, 12mm,
14mm, 11/16”
10mm, 11/16”
–
–
–
–
78104
78104
–
–
–
–
85743
74697
–
78104
78104
78104
–
–
–
–
–
78104
–
–
85252
–
85315
85745
85745
85758
78013
78013
78104
78104
78104
78104
BN,HG
CH
–
–
–
–
–
–
74187
78058
BN
85253
85253
–
85758
78104
w/ Factory –
7-Way
CH
–
–
–
74218
–
78094
78094
74682
78013
78013
78013
78104
78104
78013
–
74682
85713
74219
–
78013
78013
1/2”
40
15/32”
30
n 77273 Ø,GP,JR
10-12
n 77273 Ø,GP,JR
9/16”, 3/4”
NO DRILL
10mm, 11/16”,
3/4”
10mm, 7/8”
1/2”
30
15
NO DRILL
30
12, 13mm, 3/4”, NO DRILL
15/16”
12, 13mm, 3/4”, NO DRILL
15/16”
25
HITCH
NUMBER
Ø,JR
18mm
NO DRILL
Ø,JR
10mm, 19mm NO DRILL
12, 13mm, 3/4”, NO DRILL
15/16”
10, 13, 14, 17mm NO DRILL
l 06131 Ø,HM
14, 17mm,
3/4”, 7/8”
l 06131 Ø,HM
Ø,†,JR
Ø,HM,JR
12, 14, 17mm, 3/4” NO DRILL
Ø,HM,JR
12, 14, 17mm, 3/4” NO DRILL
Ø,JR,TA
9/16”, 11/16”, 3/4” NO DRILL
AE,HM,TA
16mm, 11/16”, 5/8” 7/16”
Ø,HM
3/4”
NO DRILL
14, 17mm,
3/4”, 7/8”
22mm,
1-1/8”
NO DRILL
5
8 20
n 33092 Ø,HM
16, 17mm, 11/16” 1” hole saw
3.5
25
17mm
NO DRILL
17mm, 3/4”
NO DRILL
17mm, 3/4”
NO DRILL
5
5
5.5 25
5.5 20
4
4
4
4
25
25
5
8
20
35
20
20
30
45
30
19mm
NO DRILL
19mm
NO DRILL
18mm
NO DRILL
6
6
6
10 15
10 15
10 15
45
n 37152 –
n 37042 –
n 88001 –
06996
20
30
l 37091 Ø
l 44674 Ø, HM
l 44596 Ø
n 77233 HM,JR
3.5 5
30
n 51138 Ø,HM
–
77112
77112
77162
77168
77172
20
20
20
15
40
n 44579 Ø,HM,JR
n 44579 Ø,HM,JR
n
n
n
n
n
n
5
5
5
5
CH
CG
25
n 33028 Ø,KH
n 33044 Ø,GP
n 77048 Ø,KH
12, 13mm NO DRILL
(x2), 17mm
12mm, 17mm NO DRILL
3.5
3.5
3.5
3.5
25
11-12
08-12
09-12
98-03
NO DRILL
NO DRILL
NO DRILL
NO DRILL
n 44561 Ø,JR
2012
97-98
93-97
98-01
02-06
07-13
08-12
04-07
18mm
10mm, 19mm
18mm
18mm
OEM REPLACE.
78013
1/2”
Ø,JR
Ø,JR
FOOTNOTES
–
19mm, 11/16”
33001
33001
33001
33017
WT. DISTRIB.
INSTALL TIME
–
–
–
–
n
n
n
n
WT. CARRYING
–
BN,HG
15
15
15
15
DRILL BITS
78013
–
–
NO DRILL
NO DRILL
WRENCHES
–
74219
–
18mm
18mm
FOOTNOTES
30 n 06961 Ø,JR
30 n 06961 Ø,JR
30 n 06961 Ø,JR
n 06968 Ø,JR
1/2”
HITCH
NUMBER
1/2”
19mm, 11/16”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
–
DRILL BITS
–
WRENCHES
78013
FOOTNOTES
–
STYLE
20
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
1/2”
DRILL BITS
–
WRENCHES
–
FOOTNOTES
78013
HITCH
NUMBER
–
INSTALL TIME
STYLE
35
DRILL BITS
9/16”
WRENCHES
–
FOOTNOTES
–
HITCH
NUMBER
78058
IONSTALL TIME
STYLE
74665
DRILL BITS
30
n 33080 Ø,JR
n 77273 Ø,GP,JR
Lancer, 4 Dr. Sedan, Except Evolution,
Ralliart & Models w/Dual Exhaust
Lancer Sportback, 5 Dr. Hatchback, Except Ralliart & Models w/Dual Exhaust
Montero, not Inc. Montero Sport
Montero Sport
Outlander
Outlander
Outlander, All, Except Outlander Sport
Outlander Sport, All Styles
1/2”
3/4”, 11/16”,
13/16”
9/16”, 11/16”,
13/16”
10mm, 3/4”,
11/16”, 13/16”
19mm, 11/16”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 45
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
n 33048 –
3/4”, 9/16”
1/2”
4
5
30
1/4”, 1/2”, 5
9/16”
6.5 35
n 44148 –
3/4”
1/2”
4
5
30
74219
–
HG
CH
CH
–
–
HG
–
CG
CG
BO
BO
CG
BN,HG
–
–
–
–
–
–
85219
85219
–
–
HG
JT 2WD models only.
231
APPLICATIONS GUIDE
Eclipse All, Inc. Spider
WIRING
STANDARD WIRE
n 77022 –
CLASS V
T-CONNECTOR
98-99
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Tracer Sedan
CLASS III/IV
CLASS III
MITSUBISHI
APPLICATIONS GUIDE
REESE TOWPOWER
MERCURY - NISSAN
MERCURY - NISSAN
230
REESE TOWPOWER
REESE TOWPOWER
n 37042 –
n 88001 –
n
n
l
l
l
n
77248
77280
77028
77028
77028
77162
Maxima All Models
09-12
n 77168 AE,HM,TA
Murano
03-07
TA
7/8”
1/2”
Ø,JR,TA
9/16”, 11/16”,
3/4”
16mm, 11/16”,
5/8”
NO DRILL
40
25
30
30
30
30
7/16”
45
Ø,HM,JR
17mm,18mm,19mm
NO DRILL
HM,JR
3/4”
1/2”
TA
7/8”
1/2”
TA
7/8”
1/2”
Murano
NV1500
NV2500 HD
NV3500 HD
Pathfinder 2 & 4 Dr.
09-12
2012
2012
2012
87-95
n 06048 –
Pathfinder 2 & 4 Dr.
96-04
n 06061 Ø,HM
Pickup (App. starts with 86-1/2)
18,19mm,
3/4”, 7/8”
17mm
40
–
20 l 51046 Ø,HM
n 37152 –
n 37042 –
Pickup
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 37152 –
Mini Van
Mini Van
Mini Van
Mini Van
Mini Van
93-97
1998
99-02
04-09
11-12
n 77110 EP
n 77110 EP
n 77110 EP
Rogue All, Except Krom
Sentra All, Inc. SE-R & SE-R SPEC V
08-13
00-02
n 77126 Ø,TA
Sentra All, Inc. SE-R & SE-R SPEC V
03-06
n 77126 Ø,TA
Sentra
07-12
n 77166 TA
Titan Pickup Crew Cab 5.6 ft. Bed
04-12
19mm, 11/16”
1/2”
19mm, 11/16”
1/2”
19mm, 11/16”
1/2”
30 n 06961 Ø,JR
30 n 06961 Ø,JR
30 n 06968 Ø,JR
19mm
NO DRILL
18mm
NO DRILL
10mm, 19mm
NO DRILL
78013
5
8 30
n 44526 Ø,GP
17mm
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
NO DRILL
5
5.5 20
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
33069
44583
44600
44664
44664
44664
44152
19mm
NO DRILL
Ø,JR
Ø,JR
Ø,GP,JR
10, 16, 17, 19mm NO DRILL
Ø,HM
17mm
NO DRILL
Ø,HM
17mm
NO DRILL
Ø,HM
17mm
NO DRILL
HM,JR
13, 19mm,
3/4”, 7/8”
17mm
1/2”
NO DRILL
17mm
NO DRILL
l 33050 Ø
n 44132 Ø
5
8
30
3.5
3.5
4
7.5
7.5
7.5
3.5
30
30
35
10 20
10 20
10 20
5 40
5
5
5.5 20
5.5 20
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
n 33048 –
3/4”, 9/16”
1/2”
4
5
30
1/4”, 1/2”, 5
9/16”
6.5 30
n 44148 –
3/4”
1/2”
4
5
30
n
n
n
n
l
33001
33001
33017
33079
44663
NO DRILL
3.5
3.5
3.5
3.5
3.5
NO DRILL
3.5
Ø,JR
18mm
NO DRILL
Ø,JR
18mm
NO DRILL
Ø,JR
10mm, 19mm NO DRILL
Ø,JR
Ø,HM,JR
18, 19mm,
6” ratchet
extension
18, 19mm
5
5
5
5
–
HG
85757
85763
85755
85755
–
–
–
78094
78013
78058
78104
78013
78013
78104
78104
CH
–
–
–
–
78107
78104
CH
–
–
Dealer
–
–
78107
85775
85775
85775
74494
78104
78104
78104
78104
78013
CH
CH
–
–
–
–
–
74218
78013
HG
–
74494
78013
BN,HG
–
74494
BN
BN, BO
CH
–
85763
–
CH
–
–
–
CH
CH
CH
HG
78013
74494
15
15
15
BN,HG
OEM REPLACE.
74219
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
STANDARD WIRE
30
T-CONNECTOR
5
HITCH
NUMBER
DRILL BITS
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
4
7/16", 1/2" 45
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18mm
BN,HG
–
HG
20
20
15
20
35
–
74219
–
78093
85770
78013
–
–
78104
78104
BN,CH
20
–
BN,HG
–
CH
–
–
–
–
–
NO DRILL
20
78108
–
78104
78013
–
–
–
NO DRILL
20
–
78013
–
–
NO DRILL
30
78094
78104
CH
–
74682
78058
BO
85219
l 51106 Ø,RT
06996
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
NO DRILL
n 44592 Ø,GP
3/4”, 7/8”,
11/16”
3/4”, 7/8”,
11/16”
3/4”, 7/8”,
11/16”
1/2”
74494
n 37042 –
Quest
Quest
Quest
Quest
Quest
6.5 35
3/4”, 9/16”
7/16", 1/2" 30
88-97
n 88001 –
1/4”, 1/2”, 5
9/16”
n 33048 –
n
n
n
n
n
n
n
1/2”
86-87
n 88001 –
6
74219
n 51147 Ø,GP
11-12
11-12
95-99
00-02
2003
04-08
1/4”, 1/2”, 5
9/16”
7/16", 1/2" 45
05-12
JUKE, AWD Only
JUKE, FWD Only
Maxima Sedan
Maxima Sedan
Maxima Sedan
Maxima All Models
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
WIRING
19mm
NO DRILL
6
10 15
l 37092 Ø
19mm
NO DRILL
6
10 15
CH
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Frontier Pickup
15, 18, 21mm,
9/16", 11/16",
3/4", T50
WRENCHES
FOOTNOTES
HITCH
NUMBER
n 37152 –
2004
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Frontier Pickup All, Inc. Desert Runner
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
233
NISSAN
NISSAN
232
REESE TOWPOWER
Xterra
00-04
Xterra
05-12
X-Trail All Models (Canada Only)
05-06
88
88
88
88
98
98
98
98
98
98
1977
78-79
80-85
86-89
1977
78-84
86-89
1977
78-84
86-89
OLDSMOBILE
RWD
RWD
RWD
FWD
n 77170 HM
n 77170 HM
l 77275 HM,JR,KH
3/4”
1”
3/4”
1”
10mm, 11/16”,
3/4”
1/4”
10, 16, 17mm
NO DRILL
06003
06003
06003
06615
06003
06003
06003
06003
06003
06615
88002
06073
88002
06073
88002
06027
06299
06285
00-03
n 06976 HM,JR
Bravada
06996
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
l 33019 Ø
7/8”
NO DRILL
3.5 5.5 15
74897
78058
n 44529 Ø
18, 19mm
NO DRILL
3.5 5.5 30
85757
85763
78058
78058
–
78013
–
–
–
–
–
–
–
–
–
–
78058
78058
78104
78013
78058
78058
78058
78058
78058
78058
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
BN, Fact. –
7-Way
models only
BN
–
BN, Fact. 85763
7-Way
models only
–
–
–
1/2”
30
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
85219
–
–
3/4”
1/2”
3/4”, 9/16”
1/2”
–
3/4”
1/2”
–
3/4”, 9/16”
1/2”
–
3/4”
1/2”
NO DRILL
Ø,JR,KH
7, 10, 13mm, 3/4”
–
13mm, 3/4”, 7/8” 1/2”
GP,JR
13, 15mm, 9/16”,
3/4”, 7/8”
15, 17mm,
9/16”, 3/4”
15, 17mm,
9/16”, 3/4”
3/4”
1/2”
30
1/2”
18mm, 7/8”
NO DRILL
30
15 n 51031 Ø, FP, HM, KK 18mm,
14mm, 9/16”,
11/16”
CH
CH
1/2”
–
–
18mm, 7/8”
BO
CH
85219
85219
85219
–
–
–
–
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
7, 13, 15mm, 11/16” 1/2”
18mm, 7/8”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
3.5 5.5 15
BO
BO
–
–
†,AO
n 06409 –
77-90
NO DRILL
78058
78058
78058
78104
78104
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
n 33014 Ø
l 33015 Ø,SD
18mm
NO DRILL
18mm, 7/8”
NO DRILL
6 30
6 30
6 15
n 33021 Ø
n 44098 Ø,HM
NO DRILL
4
6 15
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
l 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
n 51031 Ø, FP, HM, KK 18mm,
5
5
4
6 30
6 30
6 15
NO DRILL
NO DRILL
4
6 15
l 37051 FP,JT,KK 18mm, 3/4” 1/2”
l 37041 FP,JT,KK 18mm, 3/4” 1/2”
NO DRILL
n 51031 Ø, FP, HM, KK 18mm,
5
5
4
6 30
6 30
6 15
1-1/8”
3/4”
NO DRILL
4
6 15
1/2”
3/4”
1/2”
NO DRILL
5
5
4
NO DRILL
18mm,
1-1/8”
15 n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
1-1/8”
15 n 51031 Ø, FP, HM, KK 18mm,
1-1/8”
1-1/8”
Custom Cruiser Wagon
Full Size
DRILL BITS
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
WRENCHES
7/8”
74682
74682
74682
85768
85768
85768
–
–
–
†,AO
–
n 06955 Ø,FP,GP,KK
99-01
NO DRILL
10 15
10 15
10 15
–
–
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
n 06955 Ø,FP,GP,KK
1998
19mm
6
6
6
–
–
–
l 37051 JT
l 37041 JT
n 51031 Ø,HM
Bravada
NO DRILL
NO DRILL
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
7, 13, 15mm, 11/16” 1/2”
n 88002 –
n 06955 Ø,GP
91-94
96-97
19mm
19mm
–
–
AO,GP
n 51173 HM,JR
Bravada
Bravada
NO DRILL
l 37092 Ø
l 37092 Ø
l 37092 Ø
10 15
10 15
10 15
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
Aurora
91-96
19mm
6
6
6
30
30
30
30
30
30
40
30
30
40
35
40
35
40
35
40
20
35
–
–
92-98
99-04
95-99
98 Regency Includes Touring Sedan
1990
NO DRILL
NO DRILL
45
Achieva
Alero
Aurora
98 Regency Includes Touring Sedan
DRILL BITS
l 51109 Ø,RT
n 77096 Ø,EP
19mm
19mm
WIRING
25
25
30
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
FWD
Regency
Regency
Regency FWD
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 51106 Ø,RT
l 51106 Ø,RT
l 51106 Ø,RT
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
04-12
04-12
04-12
07-12
07-11
2012
STYLE
YEAR
MODEL
Titan Pickup Crew Cab 7.25 ft. Bed
Titan Pickup King Cab 6.5 ft. Bed
Titan Pickup King Cab 8 ft. Bed
Versa Hatchback
Versa Sedan
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
7/16”
30
3.5 6
4 6
60
15
4
4
6
6
20
20
4
6
15
n 33021 Ø,FP,KK
4
6
20
4
6
20
4
6
15
n 33021 Ø,FP,KK
4
6
20
4
6
20
–
–
–
–
–
–
–
–
–
–
JT 2WD models only.
235
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
NISSAN - OLDSMOBILE
NISSAN - OLDSMOBILE
234
REESE TOWPOWER
CLASS II
Cutlass RWD
78-80
n 88002 –
n 06407 –
Cutlass 4 Dr., FWD
Cutlass Ciera FWD
97-00
85-88
Cutlass Ciera FWD
89-96
n 06220 Ø,JR,X
Cutlass Ciera Cruiser
Wagon RWD
Cutlass Ciera Cruiser
Wagon FWD
78-83
n 06407 –
84-96
n 06054 Ø,AI,FM
Cutlass Supreme 4 Dr. RWD
Cutlass Supreme 2 Dr. RWD
Cutlass Supreme 2 Dr. FWD
81-87
81-88
88-93
90-91
Cutlass Supreme 2 Dr. FWD w/
Aero Sport Pkg.
92-93
92-97
94-97
Delta
Delta
Delta
Delta
1977
78-79
80-85
86-89
88
88
88
88 FWD
Delta 88
Delta 88
n 77001 AI,JR,TA
13mm, 3/4”
NO DRILL
15 n 06249 –
n 06220 Ø,JR,X
n
n
n
10, 15mm, 11/16” 1/8”, 7/16”, 40 n
92-95
96-99
98-02
LSS
LSS
LSS
Regency
Royale
Royale
Royale
Silhouette
Silhouette
Silhouette All, Inc. AWD
90-91
92-95
96-99
97-98
90-91
92-95
96-99
90-92
93-96
97-04
88002
06407
06407
06411
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
n 77109 TA
n 77070 JR
n 77070 JR
n 77040 AL,GP,JR
10, 13, 15mm, 9/16” 1/2”
7/8”
1/2”
10, 13, 15mm, 9/16” 1/2”
10, 13, 15mm, 9/16” 1/2”
10, 15mm,
3/4”, 7/8”
1/2”
20
30
20
20
30
–
–
NO DRILL
40
–
–
–
–
35
30
9/16”, 11/16”, 7/8” 3/8”
30
10, 15mm, 11/16” 1/8”, 7/16”, 60
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WRENCHES
13mm, 7/8”
9/16”, 11/16”, 7/8” 3/8”
–
AI,JR,TA
OEM REPLACE.
–
FOOTNOTES
–
WT. DISTRIB.
INSTALL TIME
30
WT. CARRYING
3/8”
DRILL BITS
–
WRENCHES
–
FOOTNOTES
–
3.5 10 40
HITCH
NUMBER
–
13/32”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
40
13, 14mm,
3/4”
DRILL BITS
NO DRILL
n 33007 –
WRENCHES
–
–
FOOTNOTES
–
HITCH
NUMBER
–
–
STYLE
–
–
1/2”
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
20
40
–
NO DRILL
13mm, 9/16”,
3/4”, 7/8”
13mm, 9/16”,
3/4”, 7/8”
9/16”, 11/16”,
7/8”
DRILL BITS
–
WRENCHES
–
1/2”
3/8”
FOOTNOTES
–
INSTALL TIME
STYLE
–
DRILL BITS
30
30
3/4”
9/16”, 11/16”,
7/8”
13mm, 3/4”
3/4”
1/2”
9/16”
HB,JR,TA
n 06305 AW,FE,
HB,JR,TA
10, 15mm, 11/16”
deep socket
10, 15mm, 11/16”
deep socket
1/8”, 7/16”, 60
9/16”
1/8”, 7/16”, 60
9/16”
n 06411 AI,JR,TA
10, 15mm, 11/16”
deep socket
1/8”, 7/16”, 60
9/16”
–
–
–
–
n 06305 AW,FE,
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
74492
74207
–
–
–
–
–
–
–
–
78104
78013
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
06003
06615
88002
06073
06615
88002
06367
06615
88002
06306
06384
51183
06073
06367
06306
06306
06073
06367
06306
06302
06302
06302
–
AO,GP
–
–
AO,GP
–
GP,JR
AO,GP
–
GP,KH
GP,JR
GP,JR
–
GP,JR
GP,KH
GP,KH
–
GP,JR
GP,KH
AL,JR
AL,JR
AL,GP,JR
30
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
7, 13, 15mm, 11/16” 1/2”
30
3/4”
1/2”
40
3/4”, 9/16”
1/2”
40
7, 13, 15mm, 11/16” 1/2”
30
3/4”
1/2”
40
10, 13, 15mm, 9/16” 1/2”
40
7, 13, 15mm, 11/16” 1/2”
30
3/4”
1/2”
40
10, 13, 15mm, 9/16” 1/2”
30
3/4”, 7/8”
1/2”
30
3/4”, 7/8”
1/2”
30
3/4”, 9/16”
1/2”
40
10, 13, 15mm, 9/16” 1/2”
40
10, 13, 15mm, 9/16” 1/2”
30
10, 13, 15mm, 9/16” 1/2”
30
3/4”, 9/16”
1/2”
40
10, 13, 15mm, 9/16” 1/2”
40
10, 13, 15mm, 9/16” 1/2”
30
10, 15mm, 3/4”, 7/8” 1/2”
40
10, 15mm, 3/4”, 7/8” 1/2”
40
10, 15mm, 3/4”, 7/8” 1/2”
40
9/16", 5/8”, 11/16” 3/8”, 1/2”
n 33068 †,AL
n 33068 †,AL
n 33094 AL,JR
1/2”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
13mm, 9/16” 1/2”
–
–
–
–
–
–
–
–
–
–
HG
–
–
–
–
–
–
–
–
–
–
10, 15mm, 3/4”, 7/8” 1/2”
40 n 51079 AL,GP,JR
13mm, 9/16”,
3/8”
11/16”
13, 16, 17mm, 3/4”, 1/2”
9/16”, 11/16”
40
–
78104
–
40
–
78013
–
89-95
n 06097 –
Breeze
96-00
n 06977 JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
3.5 3.5 30
3.5 3.5 30
3.5 5 40
13mm, 9/16” 1/2”
–
n 51102 AL,GP,JR
Acclaim
06996
–
–
HB,JR,TA
n 06003 –
n 06003 –
n 77070 JR
–
30
–
n 06305 AW,FE,
n 77001 AI,JR,TA
78058
7/16”
14mm, 9/16”,
11/16”
deep socket
9/16”
90-91
Delta 88
Intrigue
PLYMOUTH
n 77076 Ø,GP
STANDARD WIRE
n 06409 –
WIRING
T-CONNECTOR
91-92
CLASS V
74491
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Custom Cruiser Wagon
Full Size
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS I
40
JT 2WD models only.
237
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
OLDSMOBILE - PLYMOUTH
OLDSMOBILE - PLYMOUTH
236
REESE TOWPOWER
REESE TOWPOWER
n 06080 GW,GP
84-90
11/16”, 7/8”
15/32”
n 37042 JT
n 88001 JT
Grand Voyager Long Wheelbase,
2 WD Only
n 06080 GP
91-95
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
96-00
n 77012 Ø,HM
18, 19mm
NO DRILL
30 n 06369 Ø,GP
15/32”
30 n 37152 –
Neon 2 & 4 Dr.
Neon 2 & 4 Dr.
Trailduster
Trailduster
w/Skid Shield
Trailduster
Trailduster
w/Skid Shield
Voyager
95-99
00-01
All, Except w/Skid Shield 74-85
w/Deep Drop Bumper, Except 74-85
n 77121 –
n 77052 GP,JR
11/16”, 7/8”
7/16”
7/8”
1/2”
6.5 30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
–
30 n 51062 HM
n 06080 GW,GP
11/16”, 7/8”
15/32”
15, 18, 21mm,
9/16", 11/16",
3/4", T50
n 06080 GW,GP
18, 19mm
NO DRILL
30 n 06369 Ø,GP
15, 18, 21mm,
9/16", 11/16",
3/4", T50
11/16”, 7/8”
18, 19mm
–
19mm, 3/4” 1/2”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
3.5 3.5 30
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
15, 18, 21mm,
9/16", 11/16",
3/4", T50
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 30
30
30 n 51062 HM
n 37042 –
n 88001 –
OEM REPLACE.
FOOTNOTES
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STANDARD WIRE
–
1/2”
3.5 3.5 30
74187
78058
BN
–
n 33045 –
n 44006 HM
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5
30
1/2”
3.5 3.5 30
74658
78013
BN
–
HG
n 37081 M,TH
7/8”
5
10 45
–
–
–
–
n 37081 M,TH
7/8”
5
10 45
74182
74182
78058
78058
–
–
–
n 33046 †,JT
3/4”
3.5 3.5 30
74182
78058
–
–
78058
BN
–
78058
78058
78013
BN
BN
–
–
–
1/2”
78058
78058
78058
78058
–
–
–
–
–
–
–
–
n 33046 †,JT
3/4”
1/2”
3.5 3.5 30
74187
74187
n 37152 –
06996
3/4”
7/16", 1/2" 30
15/32”
78058
74051
n 37042 JT
n 77012 Ø,HM
n 33046 †
7/16", 1/2" 30
n 37152 JT
n 88001 JT
–
74658
30 n 37152 JT
91-95
91-95
91-95
96-00
3.5 3.5 30
30
20
n 88001 JT
Voyager Short Wheelbase, 2 & 4 WD
Voyager Short Wheelbase, 2 WD Only
Voyager All, Inc. 4 WD
1/2”
7/16", 1/2" 45
n 37042 JT
Voyager
3/4”
74187
All, Except w/Skid Shield 86-88
w/Deep Drop Bumper, Except 86-88
84-90
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
1/4”, 1/2”, 5
9/16”
n 33046 †,JT
7/16", 1/2" 30
n 37042 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
6
74051
n 37152 –
n 88001 –
1/4”, 1/2”, 5
9/16”
7/16", 1/2" 45
19mm, 3/4” 1/2”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
15,17,18,
19,21,
22mm,T-50,
9/16”,3/4”
3.5 3.5 30
1/4”, 1/2”, 5
9/16”
6
1/4”, 1/2”, 5
9/16”
6.5 40
n 44618 –
n 33046 –
n 33045 –
n 44006 HM
3/4”
1/2”
15, 17, 18,
19mm, 7/8”
19mm, 3/4”
7/16”
3.5 5 30
3.5 3.5 30
3.5 5 30
1/2”
3.5 3.5 30
7/8”, 11/16” 1/2”
74187
74187
74658
74658
HG
HG
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
Grand Voyager All, Inc. 4 WD
15, 18, 21mm,
9/16", 11/16",
3/4", T50
18, 19mm
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
15,17,18, 19,21,
22mm,T-50,
9/16”,3/4”
WIRING
7/16", 1/2" 30
n 37042 –
n 88001 –
WRENCHES
FOOTNOTES
HITCH
NUMBER
30 n 37152 JT
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Grand Voyager
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
239
PLYMOUTH
PLYMOUTH
238
REESE TOWPOWER
REESE TOWPOWER
85-91
n 06220 Ø,JR,X
6000 Wagon
Aztek All, Inc. AWD
84-91
01-05
n 06054 Ø,AI,FM
n 06457 –
APPLICATIONS GUIDE
n 77070 JR
10, 13, 15mm, 9/16” 1/2”
96-99
00-05
n
n
n
n
20 n
n
n
n
06003
06003
06003
06407
06367
06615
06306
06976
–
–
–
–
GP,JR
AO,GP
GP,KH
HM,JR
n 51173 HM,JR
Bonneville Wagon
Catalina
Catalina
Firebird Includes Formula
Firebird Trans Am
G3 5 Dr.
G3 Wave 5 Dr. (Canada Only)
G5 All, Except GT
G5 GT
G5 Pursuit 2 Dr. (Canada Only)
G5 Pursuit 4 Dr. (Canada Only)
G5 Pursuit GT 2 Dr. (Canada Only)
G5 Pursuit GT 4 Dr. (Canada Only)
82-83
1977
78-81
93-02
93-02
2009
2009
07-09
07-09
05-07
05-07
05-07
05-07
n 06407 –
n 06003 –
n 06003 –
l
l
n
n
n
n
n
n
n
n
n
77097
77097
77122
77132
51164
77122
77122
77132
51164
77132
51164
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
30
30
40
25
25
40
40
25
25
25
25
10, 13, 15mm,
11/16”, 3/4”
NO DRILL
45
–
3/4”, 7/8”
1/2”
–
3/4”, 7/8”
1/2”
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
JR
3/4”
1/2”
JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
G6 All Models
G8 All Models
05-09
08-09
n 06463 GP
Grand Am All Models
Grand Am w/Steel Bumper Reinforcement
Grand Am All, Inc. GT Models
78-80
78-80
92-98
n 06407 –
n 06407 –
n 06027 Ø,JR,KH
Grand Am All, Inc. GT Models
Grand Prix
99-05
78-87
n 06299 –
n 06407 –
Grand Prix All, Except SE & Turbo
88-90
n 77001 AI,AY JR,TA
Grand Prix 2 & 4 Dr., Except Turbo
91-93
n 77001 AI,AY JR,TA
Grand Prix 4 Dr. STE
91-93
n 77193 Ø,JR,KH
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
10, 15mm, 11/16” 1/8”, 7/16”, 40
9/16”
n 06411 AI,JR,TA
OEM REPLACE.
FOOTNOTES
–
–
–
–
–
–
85709
78043
78043
78043
78058
78058
78058
78104
78104
78058
78058
78058
78058
78043
78043
78043
78058
78058
78058
–
–
–
–
78043
78058
–
–
74716
–
78058
78013
–
–
–
–
30
30
40
–
–
–
78058
78058
78013
–
20
–
–
78013
78058
–
–
–
–
78104
–
–
–
–
–
–
–
–
–
–
–
–
30
30
9/16”, 11/16”, 3/8”
30
7/8”
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
–
–
–
–
–
CG
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
n 06305 AW,FE,HB,
10, 15mm, 11/16”
deep socket
10, 15mm, 11/16”
deep socket
1/8”, 7/16”, 60
9/16”
1/8”, 7/16”, 60
9/16”
–
78104
–
–
–
78013
–
–
–
78013
–
–
–
–
78058
78058
–
35
–
–
–
3/8”
30
30
–
–
78058
78013
–
–
–
3/8”
30
–
78013
–
–
JR,TA
n 06353 JR
n 06262 JR
78-81
n 06407 –
06996
STANDARD WIRE
78104
78104
–
–
–
Le Mans w/Steel Bumper Reinforcement
30
20
T-CONNECTOR
–
–
9/16”, 1/16”, 3/8”
3/4”
55
40
–
n 06003 –
n 06407 –
1/2”
NO DRILL
WT. DISTRIB.
INSTALL TIME
–
40
3.5 –
3.5
78104
77-81
78-81
7/8”
9/16”, 11/16”,
7/8”
WT. CARRYING
78058
78058
78058
78058
78104
3.5
NO DRILL
–
n 06305 AW,FE,HB,
n 77109 TA
l 77077 Ø,TA
DRILL BITS
–
–
–
–
–
9/16”, 11/16”, 3/8”
3/4”
15mm, 3/4”
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
Grand Prix SE Sedan
Grand Prix GT
Coupe & Sedan Inc. GTP Package
Grand Ville
Le Mans All Models
97-03
97-08
WRENCHES
–
–
n 33061 Ø
n 44538 –
n 06411 AI,AY,JR,TA
JR,TA
n 06305 AW,FE,HB,
JR,TA
Grand Prix 2 Dr. SE w/Sport Appearance 91-96
Package & GT Models
94-96
Grand Prix 2 & 4 Dr.
FOOTNOTES
–
BN
30
30
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
7mm, 10mm,
NO DRILL
13mm, 3/4”
13mm, 3/4”, 7/8” 1/2”
HITCH
NUMBER
78107
78058
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16”, 11/16”, 7/8” 3/8”
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
–
85261
30
30
9/16", 5/8”, 11/16” 3/8”, 1/2” 30
9/16”, 11/16”, 7/8” 3/8”
30
10, 13, 15mm, 9/16” 1/2”
40
7, 13, 15mm, 11/16” 1/2”
30
10, 13, 15mm, 9/16” 1/2”
30
15, 17mm,
1/2”
30
9/16”, 11/16”, 7/8” 3/8”
DRILL BITS
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
10mm, 9/16”, 3/4” 1/2”
WRENCHES
–
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16”, 3/4”
15, 17mm,
1/2”
9/16”, 3/4”
9/16”, 11/16”, 7/8” 3/8”
FOOTNOTES
78104
10, 15mm, 11/16” 1/8”, 7/16”, 60
deep socket
9/16”
7/8”, 3/4”
1/2”
30
3/4”, 7/8”
1/2”
9/16", 5/8”, 11/16” 3/8”, 1/2”
9/16”, 11/16”,
7/8”
9/16”, 11/16”,
7/8”
–
JT 2WD models only.
APPLICATIONS GUIDE
Bonneville All, Except SLE, SSE & SSEi
Bonneville All Models
1977
78-81
80-81
82-86
92-95
WIRING
–
n 51151 HM
Bonneville
Bonneville
Bonneville
Bonneville Sedan
Bonneville All, Except SSE & SSEi
STYLE
40
40
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
NO DRILL
9/16”, 11/16”, 3/4” 3/8”
DRILL BITS
40
WRENCHES
NO DRILL
FOOTNOTES
13mm, 9/16”,
3/4”, 7/8”
13mm, 7/8”
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
6000 All, Except AWD Models
CLASS V
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
PONTIAC
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
241
PONTIAC
PONTIAC
240
REESE TOWPOWER
REESE TOWPOWER
78-81
Montana All, Inc. AWD
99-05
n 06407 –
n 77040 AL,GP,JR
10, 15mm,
3/4”, 7/8”
1/2”
30 n 06302 AL,GP,JR
n 51102 AL,GP,JR
Montana SV6 All, Inc. AWD
n 06302 AL,GP,JR
05-06
n 51102 AL,GP,JR
Montana SV6
All, Inc. AWD (Canada Only)
n 06302 AL,GP,JR
07-09
Parisienne
83-86
n 06003 –
Parisienne Wagon
83-86
n 06409 –
Safari Wagon Full Size
77-89
n 06409 –
Solstice
Solstice GXP
Solstice
Solstice GXP
Sunbird
Sunbird GT
Sunfire All, Except GT
06-08
07-08
2009
2009
88-94
88-89
95-99
n
n
n
n
n
n
n
77206
77206
77206
77206
77101
77101
77049
Sunfire GT
Torrent
95-99
2006
Torrent
07-09
Trans Sport Van
Trans Sport Van
Trans Sport Van
n 77069 JR,KH
Vibe All, Except GT Models
03-08
09-10
Wave 5 Dr. (Canada Only)
04-08
09-13
RAM, 3500 HD Chassis Cab, w/34
Wide Frames
Wide Frames
Wide Frames
10-13
11-12
RAM TRUCKS
n
n
n
n
l
77183
51169
77183
51169
77097
40 n 51079 AL,GP,JR
1/2”
40
1/2”
40 n 51079 AL,GP,JR
1/2”
40
1/2”
40 n 51079 AL,GP,JR
3/8”, 1/2”
85344
78058
HG
–
85344
78058
BN
–
30
–
78058
–
–
7/16”
30
–
–
–
–
7/16”
30
–
78058
–
–
–
–
–
–
–
–
–
78058
78058
78058
78058
78013
78013
78058
–
–
–
–
–
–
–
–
–
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
1/2”
3.5 5
40
n 33094 AL,JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
n 33094 AL,JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
78058
–
–
7/16”
40
1/2”
40
–
78028
–
78013
–
CG
–
–
1/2”
Ø,HM
19mm
NO DRILL
19mm
NO DRILL
Ø,HM
19mm
NO DRILL
Ø,HM
19mm
NO DRILL
–
3/4”, 7/8”
1/2”
06391
51185
06391
51185
Ø,HM
18,19mm, 3/4”
NO DRILL
Ø,HM
18,19mm, 3/4”
NO DRILL
Ø,HM
18,19mm, 3/4”
NO DRILL
Ø,HM
18,19mm, 3/4”
NO DRILL
30 n 06302 AL,GP,JR
5, 10, 13mm, 7/8” #11 (.191
DIA.), 1/2”
10, 15mm,
1/2”
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
25 n 51193 Ø,HM
25
25 n 51193 Ø,HM
25
3.5 4 30
3.5 4 30
40
40 n 51079 AL,GP,JR
40
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5 40
n
n
n
n
n
n
n
44637
44630
44637
44630
33068
33068
33068
Ø,HM
Ø,†,HM
Ø,HM
Ø,†,HM
†,AL
13mm, 9/16” 1/2”
†,AL
13mm, 9/16” 1/2”
†,AL
13mm, 9/16” 1/2”
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4
3.5
3.5
3.5
78013
CE
–
–
74492
74492
78058
78058
78058
–
–
–
–
–
–
74207
78013
–
–
78008
78013
CG
–
78010
78104
CH
–
–
–
–
–
78071
N/A
Fifth Wheel –
models
only
–
–
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
n 44574 AL,JR
10, 15mm,
3/4”, 7/8”
1/2”
3.5 5
40
21, 24mm, 11/16”
13/16”, 7/8”
15
–
16 35 –
11-12
n 96947 @
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35 –
–
11-12
n 96947 @
21, 24mm, 11/16”
13/16”, 7/8”
15
16 35 –
–
06996
NO DRILL
3/4”, 1-1/8” NO DRILL
6
–
–
74709
n 33094 AL,JR
n 44603 Ø,CP
–
–
30
30
30
30
30
30
30
15
15
15
15
30
15
–
n 96947 @
19mm
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
1/2”
40
–
Ø,HM
n 51169 Ø,HM
–
3.5 5
40
n 51102 AL,GP,JR
Vibe All, Inc. GT Models
HG
1/2”
7/16”
n 06091 AL,GP
10, 15mm,
3/4”, 7/8”
78013
10, 15mm,
3/4”, 7/8”
–
n
n
n
n
n 77040 AL,GP,JR
74207
n 33094 AL,JR
–
90-92
1993
94-96
Trans Sport Van All, Inc. Montana 97-98
40
78058
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”,
11/16”
13mm, 9/16”, 11/16”
n 51163 GP,JR
1/2”
–
GP,JR
n 77049 GP,JR
–
40
13mm, 11/16”, 3/4” 7/16”
13mm, 11/16”, 3/4” 7/16”
03-05
–
1/2”
†,TA
†,TA
Sunfire All Models
78058
40
11/16”, 3/8”, 1/2” 7/16”
11/16”, 3/8”, 1/2” 7/16”
n 77069 JR,KH
–
7/16”
HM,JR
HM,JR,X
00-02
10, 15mm,
3/4”, 7/8”
9/16", 5/8”,
11/16”
14mm, 9/16”,
11/16”
14mm, 9/16”,
11/16”
30
7/16”
11/16”, 3/8”, 1/2” 7/16”
11/16”, 3/8”, 1/2” 7/16”
Sunfire All Models
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
3/8”
WIRING
35
35
40
40
30
30
40
Ø,HM,JR
Ø,HM,JR,X
n 51163 GP,JR
9/16”, 11/16”,
7/8”
10, 15mm,
3/4”, 7/8”
CLASS V
10 20
–
–
JT 2WD models only.
APPLICATIONS GUIDE
APPLICATIONS GUIDE
n 51102 AL,GP,JR
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Le Mans Wagon
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
243
PONTIAC - RAM TRUCKS
PONTIAC - RAM TRUCKS
242
REESE TOWPOWER
05-06
99-02
2003
99-05
n 77134 Ø,JR
Astra 3 Dr. Hatchback
Astra 5 Dr. Hatchback
Aura
Ion All, Except Redline & Models w/2.4
Liter Engine
Ion 3 w/2.4 Liter Engine
08-09
08-09
07-09
03-07
n 77180 Ø,GP,JR
n 77180 Ø,GP,JR
11/16”, 3/4”, 7/8” NO DRILL
25
25
n 77050 JR
3/4”
1/2”
35
25
25
25
25
35
35
Ion Redline
L Series All Models
L Series Wagon Only
Outlook
Relay All, Inc. AWD
05-07
04-06
00-02
03-04
07-09
05-07
14, 16, 17mm, 5/8” NO DRILL
77132
51164
77132
51164
77113
77113
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
HM,JR
3/4”
1/2”
TA
3/4”
1/2”
TA
3/4”
1/2”
n 06302 AL,GP,JR
n 51102 AL,GP,JR
1/2”
11/16”, 3/4”
1/2”
14, 17mm, 11/16” NO DRILL
11/16”, 3/4”
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
91-95
SC Series 2 Dr. Coupe
96-02
Sky
07-08
Sky Redline
07-08
Sky
2009
Sky Redline
2009
SL Series 4 Dr. Sedan
91-02
SW Series Wagon
91-01
Vue All, Except Redline
02-07
n 06391 Ø,HM
18,19mm, 3/4”
Vue All, Inc. Redline
08-09
n 51185 Ø,HM
n 06528 Ø,GP
tC
tC
tC
xB
xB
xB
xD
05-06
07-10
11-13
04-07
08-10
11-12
08-10
STERLING
Pickup, Bullet
Full Size 4500 HD Chassis Cab
deep socket
n 77014 HM,JR,KH,TA 13mm, 11/16”
deep socket
11/16”, 3/8”,
n 77206 Ø,HM,JR
1/2”
11/16”, 3/8”,
n 77206 Ø,HM,JR
1/2”
11/16”, 3/8”,
n 77206 HM,JR
1/2”
11/16”, 3/8”,
n 77206 HM,JR
1/2”
n 77014 HM,JR,KH,TA 13mm, 11/16”
deep socket
n 77014 HM,JR,KH,TA 13mm, 11/16”
deep socket
n
n
n
n
n
n
n
77199
77199
77187
28501
77187
77187
77200
1/2”, 3/8”
45
1/2”
l 51083 Ø,GP,JR,RT
40 n 51079 AL,GP,JR
1/2”
40
10, 15mm,
3/4”, 7/8”
1/2”
5 5 25
3.5 5 40
l 44569 Ø,GP,JR
n 33094 AL,JR
n 44574 AL,JR
18mm, 3/4”
NO DRILL
10, 15mm,
3/4”, 7/8”
10, 15mm,
3/4”, 7/8”
1/2”
5 5
3.5 5
25
40
1/2”
3.5 5
40
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
30
30
30
–
–
–
–
78104
–
78104
78013
–
–
74700
–
78104
78104
78013
78013
–
–
–
–
–
–
78013
–
–
–
78013
–
–
–
–
74711
85344
78013
78013
78104
78058
–
–
–
–
85219
–
–
78104
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1/8”, 3/16”, 40
7/16”, 9/16”
1/8”, 3/16”, 40
7/16”, 9/16”
7/16”
35
–
78013
–
–
–
78104
–
–
7/16”
35
–
78104
–
–
7/16”
40
–
78104
–
–
7/16”
40
–
78104
–
–
1/8”, 3/16”, 40
7/16”, 9/16”
1/8”, 3/16”, 40
7/16”, 9/16”
–
78013
–
–
–
78013
–
–
GP
17mm, 11/16”
3/8”
GP
17mm, 11/16”
3/8”
Ø,GP
17, 19mm
NO DRILL
Ø,AG,JR
Ø,GP
17, 19mm
NO DRILL
Ø,GP
17, 19mm
NO DRILL
Ø,GP,JR
12, 13mm, 9/16”, NO DRILL
11/16”, 3/4”
NO DRILL
25 n 51193 Ø,HM
18,19mm, 3/4”
NO DRILL
18mm
NO DRILL
25
15
18,19mm,
3/4”
NO DRILL
3.5 4 30
n 44637 Ø,HM
3.5 4
30
74695
78013
BN,CG
–
n 44630 Ø,†,HM
n 44580 Ø,GP
18mm
3.5 4
4 4
30
15
74720
78104
CH
–
–
85702
–
74691
78100
78010
–
78013
78104
78104
78013
78104
–
78013
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
NO DRILL
30
30
15
25
15
15
20
08-09
n 41936 @, †
3/4”
17/32”
12
n 96936 @
n 41940 @, †
3/4”
17/32”
12
15
30
16 35
15
16 35 –
15
16 35 –
n 96940 @
n 96947 @
06996
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
DRILL BITS
11/16”, 3/4”
SC Series 2 Dr. Coupe
SCION
n 77014 HM,JR,KH,TA 13mm, 11/16”
WRENCHES
FOOTNOTES
n 06658 GP,JR,RB
n
n
n
n
n
n
WIRING
30
n 06135 JR
n 06135 JR
n 06136 Ø,TA
11/16”, 3/4”, 7/8” NO DRILL
CLASS V
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
30 –
CG
CG
CG
CH
CH
–
JT 2WD models only.
245
APPLICATIONS GUIDE
9-2X Aero & Linear
9 - 3 All Styles
9 - 3 Convertible Only
9-5
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
SAAB
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
SATURN
APPLICATIONS GUIDE
REESE TOWPOWER
SAAB - STERLING
SAAB - STERLING
244
REESE TOWPOWER
08-09
n 44535 Ø,GP,JR
n 44665 Ø,GP
09-13
93-01
n 77178 HM,JR
n 77091 Ø,JR
Impreza
Inc. Outback Sport & WRX, Except WRX STi
Impreza 4 Dr. Sedan, Inc. WRX
Impreza 5 Dr. Wagon, Inc. Outback Sport
& WRX, Except WRX Sti & Quad Exhaust
02-07
n 77091 Ø,JR
08-11
08-12
n 77178 HM,JR
n 77222 HM,JR
2012
08-12
n 77274 HM,JR
n 77276 HM,JR
n 77222 HM,JR
3/4” (2)
NO DRILL
20
n 06975 Ø,GP,JR
n 51174 Ø,GP,JR
n 44607 HM,JR
17/32”
12
15
30
16 35
15
16 35 –
15
16 35 –
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
–
–
–
–
78064
78064
–
78064
78104
78104
78104
78104
CH
78092
–
78104
78104
–
–
–
CH
CH
–
–
–
–
–
NO DRILL
30
–
78104
–
–
10mm, 3/4”
1/2”, 3/8”
1/2”, 3/8”
35
45
78098
–
78104
78104
CH
3/4”
–
–
–
45
30
45
–
78104
–
–
–
–
78104
78104
–
–
–
–
3/4”
1/2”, 3/8”
10MM, 3/4”
1/2”, 3/8”
3/4”
1/2”, 3/8”
Legacy Sedan, Except Outback
05-07
n 06377 Ø,JR
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
Legacy Sedan
08-09
n 51177 Ø,JR
n 06377 Ø,JR
NO DRILL
10-13
n 51177 Ø,JR
n 06669 JR,KH
14, 17mm, 3/4”
Legacy Sedan
10mm, 11/16”
All, Inc. Outback
All, Except Outback
Outback
All, Except Outback
90-95
96-99
96-99
00-04
n
n
n
n
Legacy Wagon All, Except Outback
05-07
n 06377 Ø,JR
Outback Sedan, Except Sport
00-04
n 51177 Ø,JR
n 06287 Ø
Outback Sedan, Except Sport
05-07
n 06377 Ø,JR
Outback Wagon All, Except Sport
00-04
n 51177 Ø,JR
n 06287 Ø
05-07
n 06377 Ø,JR
08-09
n
n
n
n
06996
–
NO DRILL
n 06020 KH
n 06287 Ø
10-13
21mm,
9/16”
13/16”, 7/8”
21mm,
9/16”
13/16”, 7/8”
21, 24mm, 11/16”
13/16”, 7/8”
–
14, 16, 17mm,
5/8”, 11/16”
14, 16, 17mm,
5/8”, 11/16”
06020
06020
06020
06287
51177
06377
51177
06669
NO DRILL
35
T-CONNECTOR
3/4”
–
35
30
10mm, 3/4”
3.5
WT. DISTRIB.
INSTALL TIME
n 96936 @
n 41940 @, †
30 –
1/2”, 3/8”
90-99
00-04
30
30
WT. CARRYING
12
10mm, 3/4”
Impreza 4 Dr. Sedan
Impreza 5 Dr. Wagon, Inc. Sport & WRX,
Except WRX Sti & Models w/Quad Exhaust
Legacy Coupe & Sedan, Inc. Outback & SUS
Legacy Sedan, Except Outback
Legacy Wagon
Legacy Wagon
Legacy Wagon
Legacy Wagon
3.5 4 35
3.5 5.25 30
DRILL BITS
17/32”
CH
NO DRILL
25
20
NO DRILL
25
n 44581 Ø,JR
14, 17mm,
3/4”
NO DRILL
4
25
–
78104
–
–
14, 17mm, 3/4”
NO DRILL
14, 17mm, 3/4”
NO DRILL
25
25
n 44581 Ø,JR
14, 17mm,
3/4”
NO DRILL
4
25
–
78104
–
–
n 44631 JR,KH
4
45
85734
78104
CH
–
–
–
78064
–
78104
78104
78104
78104
–
–
–
–
–
–
78064
78104
CH
–
–
–
–
–
–
78104
–
–
78064
78104
CH
–
12mm, 3/4”, 7/8” 1/2”
KH
1-1/8 hole
saw
12mm, 3/4”, 7/8” 1/2”
KH
12mm, 3/4”, 7/8” 1/2”
25
45 n 51204 HM,JR,KH
NO DRILL
25
25
25
20
NO DRILL
25
14, 17mm, 3/4”
NO DRILL
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
NO DRILL
25
20
NO DRILL
25
14, 17mm, 3/4”
NO DRILL
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
NO DRILL
25
20
NO DRILL
25
KH
12mm, 3/4”, 7/8” 1/2”
Ø
12mm, 11/16”,
3/4”, 7/8”
14, 17mm, 3/4”
Ø,JR
14, 17mm, 3/4”
Ø,JR
14, 17mm, 3/4”
Ø,JR
14, 17mm, 3/4”
JR,KH
10mm, 11/16”
25
25
NO DRILL 25
1-1/8 hole 45 n 51204 HM,JR,KH
10mm,
11/16”
1-1/8 Hole 4
Saw
–
45
n 44581 Ø,JR
n 44581 Ø,JR
14, 17mm,
3/4”
14, 17mm,
3/4”
NO DRILL
NO DRILL
4
4
25
25
–
CH
n 44581 Ø,JR
14, 17mm,
3/4”
NO DRILL
4
25
78064
78104
CH
–
n 44581 Ø,JR
14, 17mm, 3/4” NO DRILL
4
25
78064
78104
CH
–
n 44631 JR,KH
4
45
78092
78104
CH
–
NO DRILL
NO DRILL
saw
10mm,
11/16”
1-1/8 Hole 4
Saw
–
45
JT 2WD models only.
247
APPLICATIONS GUIDE
Forester
Impreza All, Inc. Outback Sport
n 77051 Ø
11/16”, 3/4” NO DRILL
11/16”, 7/8” NO DRILL
WRENCHES
3/4”
n 96947 @
06-10
11-12
03-06
98-08
FOOTNOTES
HITCH
NUMBER
n 41936 @, †
n 96940 @
B9 Tribeca All Models
B9 Tribeca All Models
Baja
Forester All, Inc. XT
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
Pickup, Bullet
Full Size 5500 HD Chassis Cab
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
SUBARU
APPLICATIONS GUIDE
REESE TOWPOWER
STERLING - SUBARU
STERLING - SUBARU
246
REESE TOWPOWER
REESE TOWPOWER
19mm
NO DRILL
APPLICATIONS GUIDE
06-12
89-95
96-98
n 77140 Ø,EP
n 77015 Ø,HM
n 77015 Ø,HM
04-09
07-10
l 77097 –
n 77189 HM,JR
3/4”, 7/8”
1/2”
11/16”, 3/4”
SX4 Sport Sedan
08-09
n 77190 HM,JR
11/16”, 3/4”
Vitara
99-05
n 77023 Ø,HM
19mm
1” Hole Cut
Saw
1” Hole Cut
Saw
NO DRILL
19mm
NO DRILL
n 77015 Ø,HM,HP
n 77023 Ø,HM
19mm
NO DRILL
TOYOTA
4Runner
07-09
Avalon
95-99
Avalon
Avalon
Avalon
Camry 4 Dr. Sedan
Camry 2 & 4 Dr.
Camry 4 Dr.
Camry 4 Dr.
Camry 4 Dr.
Camry 4 Dr., Except Hybrid
Camry 4 Dr., Hybrid
00-04
05-10
11-12
87-91
92-96
97-01
02-04
n 33038 Ø,HM
Ø,HM,JR
10,13,14mm
NO DRILL
EP
10mm, 19mm
NO DRILL
Ø,HM,JR
14, 17mm
NO DRILL
n 77035 Ø,HM,JR
n 77035 Ø,HM,JR
05-06
07-09
07-09
10-11
06996
NO DRILL
17mm
17mm
NO DRILL
NO DRILL
15
78058
78058
74896
78013
HG
–
78018
78013
78013
CG
–
–
40
78101
78013
CG
–
74896
78013
HG
–
n 51152 Ø,HM
15
15, 18, 21mm,
9/16", 11/16",
3/4", T50
NO DRILL
3.5
15
n 33038 Ø,HM
06326
51178
06326
51178
06326
51178
06326
51178
06397
51190
06397
51190
06397
51190
3.5
15
74896
n 51152 Ø,HM
40
40
40
30 n
n
15 n
n
15 n
n
n
n
n
n
n
n
n
n
14mm, 18mm NO DRILL
7/16", 1/2" 35
20
15
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14mm,
18mm
NO DRILL
20
–
BN,RD,RZ, 85763
Fact Tow
Package
models only
HG
–
30
40
19mm
3.5 4
BN
OEM REPLACE.
85757
85763
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
DRILL BITS
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
3.5
30
HG
n 06326 HM
n 51178 HM
n 06025 –
10,13,14mm
8
78013
78013
78013
14, 18mm
NO DRILL
3.5
15
n 33038 Ø,HM
14mm, 18mm NO DRILL
3.5
15
7/16", 1/2" 35
18mm, 3/4”, 7/8” NO DRILL
18mm, 3/4”, 7/8” NO DRILL
30
30
n
l
l
l
33023
33013
33013
44548
14, 17mm, 11/16” 1/2”
14, 17mm, 11/16” 1/2”
14,17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
GP,JR,TA
10, 12, 14, 17mm 1/2”
15
15
20
15
15
15
15
15
15
15
15
45
45
45
45
45
45
18mm
CG
HG
–
–
–
–
HG
–
74896
74896
78013
78013
–
HG
–
–
HG
NO DRILL
4
4
30
74709
78104
5
5
5
6
5
5.5
5.5
7.3
40
30
30
35
–
74663
74663
–
78104
78104
78104
78013
–
–
–
85248
–
6
7.3 35
–
78013
–
–
–
78013
–
–
–
–
78109
–
–
78013
78013
78013
78104
78104
–
–
–
–
–
–
–
74205
78013
HG
–
85318
78013
HG
–
85318
78013
HG
–
85701
78104
CH
–
78109
78013
CH
–
78109
78013
CH
–
†
9/16”, 3/4”
1/2”
Ø
18mm, 3/4”
NO DRILL
Ø
18mm, 3/4”
NO DRILL
Ø,FE,LT,SI
10, 12, 13, NO DRILL
17mm, 3/4”,
1/2”
10, 12, 13, NO DRILL
17mm, 3/4”,
1/2”
l 44548 Ø,FE,LT,SI
Ø,HM,JR
14mm, 18mm NO DRILL
5
78018
–
–
n 06098 –
n 06098 –
77253
77253
77102
77004
NO DRILL
74896
n 44570 Ø,HM
n
n
l
n
WRENCHES
FOOTNOTES
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
INSTALL TIME
STYLE
STYLE
15
19mm
7/16", 1/2" 35
07-09
92-95
96-00
01-02
03-06
3.5
n 44543 Ø,EP
n 88001 –
4Runner
4Runner
4Runner
4Runner
NO DRILL
n 44526 Ø,GP
8 30
20
20
20
n 88001 –
96-98
01-06
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14mm,
18mm
5
Factory Tow 74709
Package
models only
–
HG
HG
–
CH
–
JT 2WD models only.
APPLICATIONS GUIDE
Grand Vitara
Sidekick 2 & 4 Dr.
Sidekick 2 & 4 Dr., Inc. JS 2WD, JX 4WD
(Will Not Fit Sport Model)
Swift+ 5 Dr. (Canada Only)
SX4 Crossover
XL-7
DRILL BITS
n 51152 Ø,HM
15
n 88001 –
X-90
XL-7
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
n 77023 Ø,HM
NO DRILL
STANDARD WIRE
99-05
19mm
WIRING
T-CONNECTOR
Grand Vitara
n 51147 Ø,GP
09-12
CLASS V
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
Equator
YEAR
MODEL
SUZUKI
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
249
SUZUKI - TOYOTA
SUZUKI - TOYOTA
248
REESE TOWPOWER
REESE TOWPOWER
Camry Wagon, All Styles
Celica All Models
Corolla 2 & 4 Dr. Sedan
Corolla 2 & 4 Dr. Sedan
2012
87-91
00-05
86-92
93-02
Corolla
2003
Corolla
Corolla
Corolla Wagon 2 WD
Corolla Wagon 4 WD
Cressida Sedan
Echo
Echo All, Except Hatchback
Echo All, Except Hatchback
Echo Hatchback 2 & 4 Dr., Except Turbo (Canada Only)
FJ Cruiser
Highlander
Highlander All, Inc. Hybrid
Highlander
All, Inc. Hybrid & models w/ Full Size 19” Spare
Highlander
All, Inc. Hybrid, except for w/ 19” spare
Highlander
All, Inc. Hybrid & models w/ Full Size 19” Spare
Hilux
LandCruiser
LandCruiser
LandCruiser
2008
09-13
88-92
88-93
86-92
00-02
00-02
03-05
04-05
07-12
01-03
04-07
08-11
n 77005
n
n
n
n
n
n
n
n
77186
51171
77186
51171
77186
51171
77186
51171
10mm, 19mm
NO DRILL
14, 17mm
NO DRILL
1” hole saw
30
Ø,HM
NO DRILL
Ø,HM
17, 19mm
NO DRILL
20
20
20
20
20
20
20
20
Ø,HM
17, 19mm
NO DRILL
17, 19mm
NO DRILL
Ø,HM
17, 19mm
NO DRILL
Ø,HM
17, 19mm
NO DRILL
Ø,HM
17, 19mm
NO DRILL
Ø,HM
17, 19mm
NO DRILL
n 77086 Ø
17mm
n 77127 Ø,AD
14, 17mm
NO DRILL
NO DRILL
15
15
n 51087 Ø,GP
15 l 51153 Ø,HM
l 51155 Ø,RT
44545
44076
33075
44670
78104
–
78013
78013
78013
78024
OEM REPLACE.
85701
–
–
–
–
FOOTNOTES
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
78013
CH
–
CH
–
–
–
–
–
–
78013
CG
–
–
78013
–
–
–
78013
–
–
78020
78104
CH
–
–
–
–
78023
78023
–
–
85701
74690
78062
78013
78013
78013
78013
78013
78013
78013
78013
78013
78013
–
CH
–
–
–
–
–
–
–
–
85248
–
–
–
–
–
–
CG
CG
–
–
Ø
14, 17mm
NO DRILL
Ø
14, 17mm
NO DRILL
Ø,HM,SV
10, 12, 14,
17mm
NO DRILL
n 44587 Ø,HM
10mm, 14,
17mm
NO DRILL
5
5
25
78067
78104
CH
–
12-13
l 44670 Ø,HM,SV
10, 12, 14,
17mm
NO DRILL
5
5
40
78067
78104
CH
–
08-12
91-95
96-97
98-99
17mm, 18mm NO DRILL
6
6
6
30
30
20
78013
78013
78013
78013
–
–
–
NO DRILL
5
5
5
85718
–
74208
74225
BN,HG
n 33066 Ø
n 33066 Ø
n 44546 Ø
BN,HG
LandCruiser
2000
n 44546 Ø
NO DRILL
5
6
20
–
78013
–
–
LandCruiser
01-02
n 44546 Ø
NO DRILL
5
6
20
85248
78013
–
85248
LandCruiser
Matrix All Models
03-07
03-08
NO DRILL
5
6
20
–
78023
–
78013
–
CG
–
–
Matrix w/Ground Effects
Matrix w/o Ground Effects
Matrix All Models
03-08
03-08
09-12
78023
78023
78010
78013
78013
78104
CH
–
–
74203
78013
78104
–
–
–
85250
85250
78104
BN,HG
–
–
85725
85725
78013
78013
78013
MR2
Pickup All, Except T-100
Pickup All, Except T-100
Previa All, Inc. Supercharged
Prius
Prius
Prius C
n 06276 Ø
14, 17mm
NO DRILL
n 51158 Ø,HM
08-12
NO DRILL
NO DRILL
10mm, 14,
17mm
NO DRILL
5
5 25
Ø,GP
n 44546 Ø
n 77183 Ø,HM,UD
n 51169 Ø,HM,UD
n 77183 Ø,HM
n 51169 Ø,HM
19mm
NO DRILL
19mm
NO DRILL
19mm
NO DRILL
19mm
NO DRILL
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
7/16", 1/2" 30
n 88001 –
15, 18, 21mm,
9/16", 11/16",
3/4", T50
14mm
7/16", 1/2" 30
n 06229 Ø,GP,JR
06996
10, 14, 17mm
NO DRILL
17, 19mm
NO DRILL
12, 13mm
NO DRILL
NO DRILL
17mm, 18mm NO DRILL
12, 19mm,
7/8”
12, 19mm,
7/8”
12, 19mm,
7/8”
12, 19mm, 7/8”
15
15
89-95
n 77179 Ø,HM,SC
n 77236 Ø,HM,JR
n 77277 Ø,GP
19mm, 3/4”
15
15
86-90
84-88
91-97
04-09
10-12
2012
14, 17mm
14, 17mm
n
l
l
l
30
15
20
40
78109
5 6
3.5
3.5
5 5
5 6 30
3.5
15
3.5
20
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
45
45
40
40
15
10, 17, 18mm,
11/16”
17, 19mm
Ø,HM
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
l 77102 EP
n 77085 Ø
WIRING
NO DRILL
n 51015 Ø,AA
3/4”, 7/8”
NO DRILL
3.5 4 20
n 33024 Ø,AA
3/4”, 9/16”
NO DRILL
5
5
60
n 51015 Ø,AA
3/4”, 7/8”
NO DRILL
3.5 4 20
n 33024 Ø,AA
3/4”, 9/16”
NO DRILL
5
5
60
30
30
25
20
CH
BN,HG
CH
BN,HG
CG
CG
–
–
–
–
HG
–
CH
CH
–
–
–
JT 2WD models only.
APPLICATIONS GUIDE
Corolla
04-07
n 06397 GP,JR,TA 10, 12, 14, 17mm 1/2”
n 51190 GP,JR,TA 10, 12, 14, 17mm 1/2”
n 06139 HM,JR,KH,SV 10, 12, 14, 17mm 1/2”, 1”
CLASS V
STANDARD WIRE
10-11
CLASS III/IV
CLASS III
T-CONNECTOR
Camry 4 Dr., Hybrid
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
251
TOYOTA
TOYOTA
250
REESE TOWPOWER
REESE TOWPOWER
03-07
Sequoia
Sienna Van
08-12
98-00
n 06077 Ø
16mm, 7/8”
NO DRILL
15
n 44602 Ø,AI
n 33008 –
Sienna Van
01-03
n 06077 Ø
16mm, 7/8”
NO DRILL
15
n 33008 –
Sienna Van All Models
Sienna Van All Models
04-10
11-13
l 06141 Ø,HM,SV
10, 19mm, 6”
NO DRILL
Ratchet Extension
NO DRILL
NO DRILL
15
15
n 06668 Ø,HM
17, 19mm
NO DRILL
20 n 51157 Ø,RT
l 51080 Ø,RT,JR
20 l 51080 Ø,RT,JR
l 06140 Ø,HM,SV
Solara
99-03
Solara
Solara
T-100 Pickup All Models
04-06
07-09
93-98
Tacoma Pickup
All, 2 & 4 WD (App. starts with 95-1/2)
95-04
n 77035 Ø,HM,JR
17mm
NO DRILL
15 n
n
n
n
06326
51178
06387
06387
HM
10, 19mm, 6”
NO DRILL
Ratchet Extension
14, 17mm, 11/16” 1/2”
HM
14, 17mm, 11/16” 1/2”
Ø,JR
14, 17mm
NO DRILL
Ø,JR
14, 17mm
NO DRILL
3.5 4 20
Tercel 2 & 4 Dr. Sedan
Tercel 2 & 4 Dr. Sedan
Tundra
–
–
19mm
NO DRILL
19mm
NO DRILL
3.5 5 30
3.5 5 30
l 33070 Ø,JR,TS
l 33070 Ø,JR,TS
10, 19mm
NO DRILL
3.5 5 45
l 44648 Ø,HM,SV
3.5 5
30
–
78013
–
–
NO DRILL
NO DRILL
3.5 5
3.5 5
30
30
78004
85720
78013
78104
–
19mm
CH
–
–
10, 19mm,
6 ratchet
NO DRILL
3.5 5
45
85720
15
15
15
15
–
78013
–
–
78013
–
78013
–
–
BN,HG
–
–
–
n 33022 Ø,†,CN
CH
NO DRILL
5
7
45
–
–
85718
NO DRILL
5
5.5 30
85250
78013
BN,HG
NO DRILL
5
5.5 40
05-08
n 51146 Ø,GP
10, 17,
19mm
NO DRILL
5
5.5 30
n 33090 Ø,GP
18mm, 9/16”,
7/32” Allen
18, 19mm,
9/16”, 3/4”,
#45 Torx
18, 19mm,
9/16”, 3/4”,
#45 Torx
10, 17, 19mm
NO DRILL
5
5.5 30
85718
78013
BN,HG
–
09-13
n 51146 Ø,GP
10, 17,
19mm
NO DRILL
5
5.5 30
n 33090 Ø,GP
5
5.5 30
85718
78013
BN,HG
–
74682
–
–
74887
78058
78013
78013
78104
BO
85262
–
–
–
n 51108 Ø,GP
18,19mm,
3/4”, 7/8”
NO DRILL
5
5.5 40
n 33025 Ø
83-90
91-98
2000
77258
n 51047 Ø,GP
5
7.5 15
l 37069 –
9/16”, 3/4” 1/2”
5
7.5 35
33049
37034
37094
44054
33049
37034
37094
44054
33049
37034
37094
44054
44568
Ø
18mm, 3/4”
NO DRILL
07-09
n 51091 Ø,RT,CP,HM 17, 19, 22mm, NO DRILL
6
8 20
Ø,CP,HM
3/4”, 7/8”
Tundra
Models without Factory Installed Receiver
10-12
n 51091 Ø,RT,CP,HM 17, 19, 22mm, NO DRILL
6
8 20
n 44568 Ø,CP,HM
3/4”, 7/8”
Yaris Liftback
HITCH
NUMBER
1/2”
Tundra
Models without Factory Installed Receiver
Venza, All Styles
Yaris Sedan
–
–
20
n 51047 Ø,GP
01-02
l 37069 –
Tundra
–
–
CH
–
w/ Fac- 85249
CG
CG
14, 17mm,
7/8”
14, 17mm,
7/8”
19mm
n
l
l
n
n
l
l
n
n
l
l
n
n
Tundra
OEM REPLACE.
–
20
20
20
25
FOOTNOTES
78113
78013
5
WT. DISTRIB.
INSTALL TIME
–
–
3/4”
3/4”
1/2”
WT. CARRYING
6 10 40
3.5 5 30
n 44089 Ø
DRILL BITS
1/2”
17, 19mm
3/4”
WRENCHES
78113
NO DRILL
Ø
Ø
3.5
3.5
3.5 4
5 6.5
FOOTNOTES
–
NO DRILL
NO DRILL
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
6.5 25
tory Tow
Package
–
DRILL BITS
78013
78013
78104
78013
17, 19mm
17, 19mm
n 44051 Ø
Tacoma Pickup
All, Except X-Runner
Tacoma Pickup
All, Except X-Runner
78025
78026
78048
85249
Ø,RA
Ø
n 51047 Ø,GP
l 37069 –
03-06
09-13
07-11
07-11
9/16”, 3/4” 1/2”
9/16”, 3/4” 1/2”
3/4”, 7/8”
3/4”, 7/8”
l 06138 Ø
n 77191 Ø,GP
n 28502 Ø,†,AG,GP
n 77191 Ø,GP
06996
12, 13mm
NO DRILL
12, 13mm
NO DRILL
12, 13mm
NO DRILL
17mm
NO DRILL
20
20
20
20
5
5
5
5
7.5 15
7.5 35
7.5 15
7.5 35
–
15/16", 3/4” 5/8”
–
15/16", 3/4” 5/8”
Ø
18mm, 7/8”
NO DRILL
Ø
18mm, 3/4”
NO DRILL
–
15/16", 3/4” 5/8”
–
15/16", 3/4” 5/8”
Ø
18mm, 7/8”
NO DRILL
Ø
18mm, 3/4”
NO DRILL
Ø
15/16", 3/4” 5/8”
–
15/16", 3/4” 5/8”
Ø
18mm, 7/8”
l 44604 Ø,HM,JR
17mm
NO DRILL
NO DRILL
5
7
7
5
5
7
7
5
5
7
7
5
6
7.5
12
12
7.5
7.5
12
12
7.5
7.5
12
12
7.5
8
20
30
30
20
20
30
30
20
20
30
30
20
20 n 41935 Ø,@,CP,HM, 17, 19mm, 21mm NO DRILL
6
8
3.5 4
74887
85247
–
–
BN,GC
BN,GC
78104
85247
BN,GC
–
BN,GC
–
–
78104
–
BO
–
85219
12
14 30 –
78058
–
–
n 96935 Ø,@,CP,HM 17, 19mm, 21mm NO DRILL
20 n 41935 Ø,@,CP,HM 17, 19, 21mm NO DRILL
12
12
14 30
14 30 –
78058
–
–
n 96935 Ø,@,CP,HM 17, 19, 21mm NO DRILL
12
14 30
BO
85219
†
20
–
74682
78071
78104
–
78108
85744
78104
78104
–
–
–
78013
–
–
5th-Wheel –
Harness
B
–
JT 2WD models only.
APPLICATIONS GUIDE
l 51196 Ø,HM,SV
17mm,19mm NO DRILL
STANDARD WIRE
Sequoia
17, 19mm
WIRING
T-CONNECTOR
96-00
01-05
06-12
01-02
WRENCHES
33060
33060
44540
44089
FOOTNOTES
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
n
n
n
n
RAV4
RAV4
RAV4
Sequoia
17, 19mm
CLASS V
INSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
IONSTALL TIME
STYLE
DRILL BITS
CLASS III/IV
CLASS III
STYLE
n 77107 Ø
n 77107 Ø
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
APPLICATIONS GUIDE
CLASS II
CLASS I
253
TOYOTA
TOYOTA
252
REESE TOWPOWER
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
2005
WIRING
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
n 77106 TA
DRILL BITS
2005
WRENCHES
1/2”
FOOTNOTES
3/4”, 7/8”
3/4”, 7/8”
STYLE
TA
TA
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
77197
77197
77197
77235
77235
77065
77106
77106
DRILL BITS
n
n
n
n
n
n
n
n
WRENCHES
2006
07-09
07-09
10-12
10-12
94-98
99-04
99-04
FOOTNOTES
GTI 2 Dr. Hatchback
GTI 2 Dr. Hatchback
GTI 4 Dr. Hatchback
GTI 4 Dr. Hatchback
GTI 2 Dr. Hatchback
Jetta Jetta III, Inc. GT
Jetta Sedan, Except Gas Turbo & Wagon Models
Jetta Sedan,
Except Wagon Models (App. starts w/ 99-1/2)
Jetta Sedan,
Except Gas Turbo & Wagon Models (Old Body Style)
Jetta Sedan, Except Wagon Models (Old
Body Style)
Jetta 4 Dr. Sedan (New Body Style)
HITCH
NUMBER
77026
77106
77196
77026
77026
77197
77197
77197
77197
77235
77235
77249
CLASS V
INSTALL TIME
STYLE
l
n
n
l
l
n
n
n
n
n
n
n
DRILL BITS
07-10
07-09
07-12
85-06
99-06
10-13
10-13
10-13
10-13
2010
2010
10-12
WRENCHES
City Golf Canada Only
City Jetta Sedan (Canada Only)
Eos All Models
Golf
Golf Except GTI V6
Golf 2 Dr. Hatchback, Inc. TDI
Golf 3 Dr. Hatchback, Inc. TDI (Canada Only)
Golf 4 Dr. Hatchback, Inc. TDI
Golf 5 Dr. Hatchback, Inc. TDI (Canada Only)
Golf GTI 2 Dr. Hatchback (Canada Only)
Golf GTI 4 Dr. Hatchback (Canada Only)
Golf Wagon Canada Only
FOOTNOTES
77026
77026
77264
77266
77221
HITCH
NUMBER
l
l
n
n
n
IONSTALL TIME
STYLE
98-01
02-10
2012
2012
09-13
DRILL BITS
HITCH
NUMBER
WRENCHES
STYLE
FOOTNOTES
YEAR
Beetle
Beetle All, except Turbo S
Beetle All, except Turbo
Beetle, Turbo Only
CC All, Except 4 Motion
MODEL
VOLKSWAGEN
CLASS III/IV
CLASS III
HITCH
NUMBER
CLASS II
CLASS I
30
30
20
30
35
–
–
–
–
–
78104
78104
–
–
–
30
30
40
30
30
15
15
15
15
40
40
40
–
–
–
–
–
78013
78013
78113
78013
78013
1/2”
15
15
15
40
40
30
30
30
–
–
–
–
–
–
–
–
78104
78113
78113
78113
78113
78013
78013
78013
–
–
–
–
–
–
–
–
–
3/4”, 7/8”
1/2”
30
–
78013
–
–
n 77106 TA
3/4”, 7/8”
1/2”
30
–
78013
–
–
05-10
n 77249 Ø,HM,JR,TA
40
85782
78104
CH
–
Jetta 4 Dr. Sedan (New Body Style)
11-13
n 77249 Ø,HM,JR,TA
40
–
–
–
–
Jetta SportWagen
09-13
n 77249 Ø,JR,TA
T-25, 10, 13mm, NO DRILL
11/16”, 3/4”
11/16”, 3/4”
11/16”, 3/4”
40
–
–
–
–
Jetta Wagon
Passat All, Except 4 Motion & W8 Engine
Models
Passat All, Except 4 Motion
03-06
99-05
TA
n –
n 77039 RB,TA
–
06-10
n 77221 HM,JR,X
TA
13mm, 7/8”
1/2”
TA
13mm, 7/8”
1/2”
Ø,HM,JR
12mm, 11/16”
NO DRILL
GP,JR
13mm, 3/4”
11/16”
HM,JR,X
TA
T-20, T-25, 13mm, 1/2”
11/16”
13mm, 7/8”
1/2”
TA
3/4”, 7/8”
Ø,GP,JR
13mm, 3/4”
NO DRILL
TA
13mm, 7/8”
1/2”
TA
13mm, 7/8”
1/2”
Ø,HM
13, 19mm, 3/4”
NO DRILL
Ø,HM
13, 19mm, 3/4”
NO DRILL
Ø,HM
13, 19mm, 3/4”
NO DRILL
Ø,HM
13, 19mm, 3/4”
NO DRILL
Ø,JR,KH
13, 18mm, 3/4”
NO DRILL
Ø,JR,KH
13, 18mm, 3/4”
NO DRILL
Ø,JR,TA
Ø,HM
11/16”, 3/4”
13, 19mm, 3/4” NO DRILL
Ø,HM
13, 19mm, 3/4”
07-10
Ø,HM
13, 19mm, 3/4”
NO DRILL
13, 18mm, 3/4”
NO DRILL
Ø,JR,KH
13, 18mm, 3/4”
NO DRILL
–
3/4”, 7/8”
1/2”
n 77221 HM,JR,X
n 77155 †,HM,JR,X
Passat Sedan
12-13
Rabbit All Models
Rabbit All Models
Routan
2006
07-09
09-12
NO DRILL
Ø,JR,KH
n 77155 †,HM,JR,X
Passat Wagon All, Except 4 Motion
1/2”
n 77267 Ø,EP,GP,
JR,SV,TA
n 77197 Ø,HM
n 77197 Ø,HM
09-13
04-10
06996
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
T-25, T-27,
10mm, 3/4”
1/2”
50
40
–
–
–
78013
–
–
–
T-20, T-25, 13mm,
11/16”
T-20, 13mm,
11/16”
T-20, T-25, 13mm,
11/16”
T-20, 13mm,
11/16”
T-15, T-25, 10mm,
13mm, 3/4”
13, 19mm, 3/4”
1/2”
35
–
78113
–
–
1/2”
35
1/2”
35
85781
78113
CH
–
1/2”
35
NO DRILL
30
NO DRILL
NO DRILL
15
15
78104
78113
–
13, 19mm, 3/4”
–
–
–
–
n 06550 Ø,GP,JR
n 51192 Ø,GP,JR
13,15,18mm
NO DRILL
13,15,18mm
NO DRILL
20
20
n 06625 Ø,EP
17mm
NO DRILL
20
n 51203 Ø,GP,JR
Tiguan
Touareg
–
–
4
4
n 44586 Ø,GP,JR
13,15,18mm NO DRILL
4
5
20
–
–
–
l 44611 Ø,EP
n 44530 AA,RB
17mm
NO DRILL
18mm,T-25,
T-27,7/8”
1/2”
3.5
6 6
20
90
85777
–
85733
20
BN, CH
78104
78113
–
CH
–
–
JT 2WD models only.
255
APPLICATIONS GUIDE
APPLICATIONS GUIDE
REESE TOWPOWER
VOLKSWAGON
VOLKSWAGON
254
REESE TOWPOWER
REESE TOWPOWER
140
160
240
740
760
780
850
n
n
n
n
n
n
n
850 Series Wagon
94-97
n 06024 GP,JR
940 Series, All Styles
960 Series, All Styles
C30
91-95
92-94
08-10
n 06223 Ø,FE,JR
n 06223 Ø,FE,JR
C70 Coupe
98-02
n 06024 GP,JR
C70 Convertible
98-04
n 06024 GP,JR
00-04
S40 Sedan Old Body Style
04-10
S40
Sedan New Body Style (App. starts with 2004-1/2)
01-09
S60 Sedan
n 77182 HM,JR,KH
n 77084 TA
n 77156 Ø,GP,JR
3/4”
06426
06426
06426
06223
06223
06223
06024
3/4”, 7/8”
1/2”
NO DRILL
OEM REPLACE.
FOOTNOTES
STANDARD WIRE
T-CONNECTOR
WT. DISTRIB.
INSTALL TIME
WT. CARRYING
20
–
78104
–
–
NO DRILL
NO DRILL
40
40
–
–
–
78104
78104
78113
–
8, 17, 19mm
–
–
–
–
–
12, 14mm,
3/4”, 7/8”
12, 14mm,
3/4”, 7/8”
98-00
n 06024 GP,JR
V70 Wagon All, Inc. AWD & XC
01-02
n
n
n
n
–
–
–
–
–
–
–
78013
78013
78013
78104
78104
78104
78104
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1/2”
20
–
78113
–
–
1/2”
20
–
78113
–
–
–
–
–
–
–
–
–
–
–
78104
–
–
–
78104
–
–
–
78012
–
–
78104
78113
78104
78104
–
–
–
–
–
–
20
25
17mm
NO DRILL
17mm
NO DRILL
12, 14mm,
3/4”, 7/8”
8, 17, 19mm
1/2”
NO DRILL
NO DRILL
15
15
20
40
35
20
25
06420
51172
06420
51172
DRILL BITS
1/2”
V70 Wagon All, Inc. AWD & XC
1/2”
NO DRILL
WRENCHES
1/2”
n 06394 Ø,X
n 06608 Ø,HM,JR,KH 13mm, 11/16”
3/4”, 7/8”
FOOTNOTES
12, 14mm,
3/4”, 7/8”
12, 14mm,
3/4”, 7/8”
8, 17, 19mm
NO DRILL
NO DRILL
99-06
07-12
00-04
05-10
M10, M12,
M13, 3/4”
HITCH
NUMBER
WT. CARRYING
WT. DISTRIB
INSTALL TIME
STYLE
DRILL BITS
GP,JR
14, 17, 22mm
8, 17, 19mm
S80 Sedan
S80 Sedan
V40 Wagon
V50 Wagon
CH
–
1/2”
20
–
78113
–
–
Ø,HM,JR
12, 14mm,
3/4”, 7/8”
17mm
NO DRILL
NO DRILL
–
–
–
78113
78113
78113
–
17mm
15
15
15
15
–
Ø,HM,JR
–
–
–
Ø,HM,JR
17mm
NO DRILL
Ø,HM,JR
17mm
NO DRILL
V70 Wagon All, Inc. AWD
08-10
n 44597 Ø,DU,EP,
XC60
10-13
n 44629 Ø,GP,JR,
XC70 Wagon AWD
03-07
GP,SQ
KH,SR
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
17mm
NO DRILL
17mm
NO DRILL
8, 10, 13,
NO DRILL
17mm, T-20
Torx
4
70
78005
78113
CH
–
4
4.5 45
85749
78113
CH
–
–
78113
–
–
70
–
78113
–
–
25
25
–
78047
78113
78113
–
CH
–
–
15
15
XC70 Wagon AWD
08-13
n 44597 Ø,DU,EP,
XC90
XC90
03-04
05-13
n 33073 Ø,JR
n 33073 Ø,JR
GP,SQ
06996
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
WT. CARRYING
WT. DISTRIB.
INSTALL TIME
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
NO DRILL
NO DRILL
FE
Ø,FE,JR
98-00
03-07
INSTALL TIME
STYLE
8, 17, 19mm
8, 17, 19mm
NO DRILL
NO DRILL
n 06420 Ø,HM,JR
n 51172 Ø,HM,JR
n 06024 GP,JR
n 77084 TA
n 77156 Ø,GP,JR
DRILL BITS
Ø,FE,JR
Ø,FE,JR
14, 17, 22mm
14, 17, 22mm
3/8”, 1” Hole 45
Saw
M10, M12,
M13, 3/4”
WIRING
60
60
60
40
40
40
20
FE
FE
S70 Sedan Inc. AWD
V70 Wagon All, Inc. AWD
WRENCHES
FOOTNOTES
HITCH
NUMBER
74-82
74-82
74-93
84-92
84-90
88-90
93-97
CLASS V
8, 10, 13,
17mm, T-20
Torx
17, 18mm
NO DRILL
4
NO DRILL
17, 18mm
NO DRILL
5
5
5
5
JT 2WD models only.
APPLICATIONS GUIDE
Series
Series
Series
Series, All Styles
Series, All Styles
Series 2 Dr. Coupe
Series Sedan, Inc. T5
CLASS III/IV
CLASS III
IONSTALL TIME
STYLE
DRILL BITS
WRENCHES
FOOTNOTES
HITCH
NUMBER
STYLE
YEAR
MODEL
VOLVO
APPLICATIONS GUIDE
CLASS II
CLASS I
257
VOLVO
VOLVO
256

applications guide instructions

Transcription

Similar documents

Towing Hitch Application Guide

TABLE OF CONTENTS - Truck Accessories