ss42-500 stainless steel portable davit crane

ss42-500 stainless steel portable davit crane

SS42-500
STAINLESS STEEL PORTABLE DAVIT CRANE
SS42-500 S.S. PORTABLE DAVIT CRANE
The SS42-500 portable davit crane is used with the submersible
series chemical induction units for easy installation and removal
for maintenance inspection. The crane is rated for up to 500 lb.
load capacity.
The crane is supplied with a pedestal base for flush or side wall
mounting. The crane rotates 360 degrees for ease in installing
or removing a CIU. Adjustable boom angle and extension
provides the reach needed for CIU channel installations.
The crane mast, boom, and base are constructed of 316 stainless
steel. The winch options include a zinc plated or 304 stainless
steel spur gear winch with brake for load control. 316 stainless
steel 1/4” wire rope lifting cable and eye clip are standard with
each winch.
The SS42-500 portable davit cranes easily install with new or
retrofit with existing chemical induction unit installations.
THERN MODEL 4042PBSS
1,000 lb. RATED 304 S.S.
OR
SHELBY MODEL 5331
1,000 lb. RATED ZINC PLATED WINCH
2" SQUARE TUBE BOOM
316 STAINLESS STEEL
BOOM REACH PILOT HOLES
4.0" WIRE ROPE SHEAVE
316 STAINLESS STEEL
2" SQUARE TUBE MAST
316 STAINLESS STEEL
PEDESTAL BASE
316 STAINLESS STEEL
6"x 6"x1/4" FLANGE BASE
316 STAINLESS STEEL
The SS42-500 is proudly made in the U.S.A. and is backed by a 1 year limited warranty.
THE MASTRRR COMPANY
www.gasmastrrr.com mastrrr @airmail.net
1-800-299-6836
1-800-226-2659 Fax
POSITION
A
.
.
.
42"
32"
24"
1
2
3
B
36"
27"
21.5"
B HEIGHT REAR DIMENSION
72"
67"
64"
12"
24"
32"
QTY. 2 SUPPLIED
THERN MODEL 4042PBSS IS MANUFACTURED FROM 304 STAINLESS STEEL
ZINC PLATED WINCH OPTIONAL
LIFTING CABLE ASSEMBLY
Qty. 1 S.S. lifting cable assemblies, 20' long (standard length)
PIVOT STOP
CLAMP
EYE BOLT ON
SLIDE BRACKET