Flooring Spec Guide Size

Transcription

RUSSWOOD INTERIORS
SPECIFICATION GUIDE
Solid & Engineered Oak Flooring
Oak Parquet Flooring
Maritime Pine Flooring
Accessories
Internal Timber Wall Panelling
At Russwood, we’re passionate about our flooring
and supply a wide range of solid and engineered oak
boards to both commercial and domestic projects
throughout the UK.
All our boards are tongue and grooved on all four sides to
reduce waste and are finished with a micro-bevel on the long
side of the board.
Flooring Components
Finish your project with style. We can supply stair treads, stair
nosings, skirting boards and thresholds which can be ordered
in a range of colours to match your floor. These details can help
to unify the space in your flooring project. Speak to our flooring
experts who can help you choose the right accessories that will
create a seamlessly finished flooring project.
Solid
Stair Nosings
Engineered
Skirtings
We are also happy to write the K21 NBS specification for any of
our flooring products.
Our floors are bespoke and made to order - we don’t stock
standard ranges. We can help and guide your choice with
expert staff who are knowledgeable, experienced and very
helpful - call 01540 673648.
Facings
Chateau
Character
Smooth, contemporary, sleek
Chateau Oak Flooring
A smooth contemporary take on oak flooring; the sleek natural
look of these modern boards can unify and enhance any
modern living space.
Character Grade
Ideal for naturally inspired interiors. The beautifully prominent
figuring with large hand-filled and sanded knots illustrate the
true, rustic nature of this product.
Bespoke options - board widths and pre-finished colours.
See www.russwood.co.uk/flooring/colour-guide
SPECIFICATION
Finest quality European oak
Solid or engineered boards
Hand-selected and graded boards ensure that a consistently
high quality is achieved.
Widths:
Solid 20mm thick: 120mm; 150mm; 170mm; 185mm
Engineered 15mm thick: 155mm; 175mm; 190mm; 225mm
Engineered 20mm thick: 225mm, other widths available on
request
Lengths:
Solid Boards: 70% will be over 1.7m length and up to 2.5m
Engineered Boards: average lengths 2.2-2.4m
TOG Rating:
Solid Board 20mm 1.32 TOG
15mm 2 layer Engineered Board 1.24 TOG
Heat Transfer:
Solid Board 0.156 Wm2k
15mm 2 layer Engineered Board 0.118 Wm2k
helpful - call 01540 673648.
Stair treads, stair nosings, skirtings and thresholds also
available.
Chateau
Character/Prime
Character/Prime Grade
This grade retains a rustic charm but the knots are much
smaller than those featuring in a Character grade board.
This is a great option for those who like the natural effect of the
wood but prefer a slightly more uniform appearance.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Engineered Board 15mm 2 layer 1.24 TOG
Heat Transfer:
helpful - call 01540 673648.
available.
Chateau
Prime
Prime Grade
Clean, contemporary and incredibly stylish. Each board has
been carefully selected to ensure that the beautiful figuring of
the wood is highlighted, but only small pre-filled and sanded
knots are present.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
Brushed
Character
Textured, contemporary, timeless
Brushed Oak Flooring
To create this effect, wire brushes are used to pull out the
softer spring wood, exposing the harder summer wood, thus
accentuating the grain and creating a beautifully textured
surface.
Character Grade
Ideal for naturally inspired interiors. The beautifully prominent
figuring and large hand-filled and brushed knots, illustrate the
true rustic nature of this product.
SPECIFICATION
Widths:
request
TOG Rating:
Lengths:
Heat Transfer:
helpful - call 01540 673648.
available.
Brushed
Character/Prime
surface.
Character/Prime Grade
This grade retains a rustic charm but the knots are much
smaller than those featuring in a Character grade board. This is
a great option for those who like the natural effect of the wood
but prefer a slightly more uniform appearance.
Bespoke options - board widths, pre-finished colours.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
Brushed
Prime
surface.
Prime Grade
Clean, contemporary and incredibly stylish. Each board has
been carefully selected to ensure that the beautiful figuring of
the wood is highlighted but, only small pre-filled and brushed
knots are present.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
17th Century
Original
Authentic, aged and distressed
17th Century Oak Flooring
A luxurious flooring choice which evokes a feeling of times past,
this aged and distressed look can be enhanced using a range of
techniques: hand scraped edges, rolling and tumbling can be
chosen either individually or as a combination for you to create
your bespoke look and feel. The knots are hand filled with a
natural filler which dry to produce sunken knots.
Original
Authentic period oak flooring available without any distressing
techniques applied.
Please see our colour guide for pre-finished colour options:
www.russwood.co.uk/flooring/colour-guide
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
17th Century
Rolled
this aged and distressed look can be enhanced using a range
of techniques: hand scraped edges, rolling or tumbling can be
Rolled
This effect is produced by machining the top of the boards which
results in surface indentations and a lightly distressed look.
Bespoke options - Hand Scraped and pre-finished colour options.
17th Century
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
Rolled
available.
17th Century
Hand Scraped
SPECIFICATION
Hand Scraped
In order to add style and authenticity, the edges of the boards
are scraped by hand to provide that special final touch. This
is reminiscent of a technique used years ago prior to machine
based sanding and the stunning effect holds true today.
Widths:
request
Bespoke options - Rolled or Tumbled and pre-finished colour
options.
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
17th Century
Tumbled
Tumbled
This effect is similar to Rolled, but more pronounced as the
boards are more heavily distressed, particularly on the edges.
The boards are tossed around in a drum along with chains, nuts
and bolts to randomly distress the surfaces; no two boards will
be the same.
Bespoke options - Hand Scraped and pre-finished colour options.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
Cross Sawn
Hand Finished
Bespoke, aged and unique
Cross Sawn Oak Flooring
Truly unique and highly individual, this bespoke flooring offers
a very distinctive look and feel. Each board is cross-sawn and
finished by hand using techniques reminiscent of bygone days:
knots are left raised, tool marks are visible and the boards are
brushed by hand, all to create an impression of hundreds of
years of use. Although available in both solid and engineered
oak, the solid boards will show off a more dramatic effect due to
the thickness of the oak.
SPECIFICATION
Widths:
Engineered 15mm thick: 190mm
Lengths:
TOG Rating:
Heat Transfer:
available.
helpful - call 01540 673648.
Unfinished
Character B
Elegant, flexible finishes
Unfinished Oak Flooring
A blank canvas; our Unfinished Oak Flooring gives you complete
control over the look and finish of your floor.
Character B
This is our rustic style flooring, where open knots and
imperfections are left unfilled to retain the traditional, natural
look of the floor. For a warm, country feel, this is the optimal
choice.
Bespoke options - board widths and your choice of on-site
finishing. We recommend our range of Osmo hard wax oils for
best results.
SPECIFICATION
Solid boards only
Widths:
Lengths:
TOG Rating:
Heat Transfer:
available.
helpful - call 01540 673648.
Unfinished
Character A
Character A
In this, our most popular product, all knots have been filled and
sanded to complement the natural figuring and colour of the
boards. This is the perfect choice if you are looking for some
character but would prefer a slightly less rustic appearance
than Character B.
best results.
SPECIFICATION
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
Unfinished
Prime
Prime and Prime Plus
If you are looking for a clean, contemporary look then our Prime
grades fit the bill. Visually, these are our cleanest grades of
timber and each board has been carefully selected to ensure
that the beautiful grain of the wood is highlighted whilst only a
few small knots are present. Prime grade refers to using solid
boards. Prime Plus refers to using engineered - our cleanest
grade with only very few pin-hole knots present.
best results.
SPECIFICATION
Solid boards - Prime
Engineered boards - Prime plus
Widths:
request
Lengths:
TOG Rating:
Heat Transfer:
helpful - call 01540 673648.
available.
Oak Parquet
Unfinished
Elegant, timeless, classic
Unfinished
The unfinished parquet blocks come in two grades: Classic
and Select. Both these options require a light sand after fitting
before being finished on site by a professional and will create
a beautiful and timeless look for any domestic or commercial
project.
Classic
This grade reflects the true nature of the timber and you will see
variation in colour alongside small knots in this option.
Select
A cleaner, more contemporary look, with very few knots visible;
much like a Prime grade.
Bespoke options - your choice of on-site finishing.
We recommend our range of Osmo hard wax oils for best results.
SPECIFICATION
Solid boards only
Widths:
70mm
Standard Lengths:
400mm, 500mm
Thickness:
21mm
TOG Rating:
20mm 1.32 TOG
Heat Transfer:
20mm 0.156 Wm2k
Tongue and grooved on all 4 sides, supplied square edged.
available.
helpful - call 01540 673648.
Oak Parquet
Pre-finished
Elegant, contemporary
Pre-finished
Our pre-finished parquet is brushed and comes coated with the
Osmo hard wax oil of your choice. Due to the brushed effect and
choice of colours we offer, this is a more contemporary option
than the unfinished parquet which requires on-site sanding and
finishing. It can also be smoked to create more colour variation
if required.
Classic
This grade reflects the true nature of the timber and you will see
variation in colour alongside small knots in this option.
Select
A cleaner, more contemporary look, with very few knots visible
– much like a Prime grade.
Bespoke options - pre-finished colours.
SPECIFICATION
Solid boards only
Widths:
70mm
Standard Lengths:
400mm, 500mm
Thickness:
21mm
TOG Rating:
20mm 1.32 TOG
Heat Transfer:
20mm 0.156 Wm2k
Tongue and grooved on all 4 sides, supplied with a micro
bevel finish on the long side of the board.
available.
helpful - call 01540 673648.
Maritime Pine
Smooth
French maritime pine is a traditional softwood flooring option
which can be considered as a cost-effective alternative
to oak. As a rustic, knotty timber, French maritime pine is
characterised by the attractively prominent colour variation
between the redder heartwood and the cream coloured
sapwood. Our pine is supplied unfinished allowing you to create
your own look on site. Please note that this product is not
suitable for use with underfloor heating. Available in two widths
and the option of either smooth or brushed boards.
Smooth
The boards are meticulously planed to produce a perfectly
even, smooth look. Supplied unfinished, you have the option to
finish the floor as you wish.
best results. See www.russwood.co.uk/flooring/colour-guide
SPECIFICATION
Finest quality French Maritime Pine
Solid boards only
Widths:
140mm, 200mm
Standard Length:
2m - microbevel on all four sides
Thickness:
21mm
TOG Rating:
20mm 1.32 TOG
Heat Transfer:
20mm 0.156 Wm2k
Tongue and grooved on all 4 sides
available.
helpful - call 01540 673648.
Maritime Pine
Brushed
French maritime pine is a traditional softwood flooring option
which can be considered as a cost-effective alternative to oak. As a
rustic, knotty timber, French maritime pine is characterised by the
attractively prominent colour variation between the redder heartwood
and the cream coloured sapwood. Our pine is supplied unfinished
allowing you to create your own look on site. Please note that this
product is not suitable for use with underfloor heating. Available in
two widths and the option of either smooth or brushed boards.
Brushed
To create a stunning texture the boards are machine brushed to
remove the soft spring wood, exposing the harder summer wood
with some appealing knots. This accentuates the grain and figuring
and results in a beautifully textured surface. Supplied unfinished,
you have the option to finish the floor as you wish.
Bespoke options - board widths and your choice of on-site finishing.
We recommend our range of Osmo hard wax oils for best results.
SPECIFICATION
Finest quality French Maritime Pine
Solid boards only
Widths:
140mm, 200mm
Standard Length:
2m - microbevel on all four sides
Thickness:
21mm
TOG Rating:
20mm 1.32 TOG
Heat Transfer:
20mm 0.156 Wm2k
Tongue and grooved on all 4 sides
available.
helpful - call 01540 673648.
Wallgrain
Fired Larch
Wallgrain
Controlled burning, heat treatment and searing add a new
dimension to this European Larch panelling. These innovative
techniques highlight the sinuous grain pattern, warm mellow
earthy tones and dark seared finishes to create dramatic
effects.
SPECIFICATION
Widths:
134mm, 159mm, 182mm
Length:
4.0m
Fired Larch
Deep earthy reds and browns are a signature feature of these
panels creating a diverse play of colour. The Larch is heat
treated at 190 degrees C and the surfaces are band saw cut
/ brushed or hacked, giving it an appearance of time past but
with an improved durability rating and dimensional stability.
Thickness:
19mm
Further information is on our website
www.russwood.co.uk/interiors/wall-panelling/wallgrain
If fire retardant is a requirement Wallgrain should be ordered
without Universal Wax Sealant. Please call to ask advice on
Fire retardants.
Our panelling is bespoke and made to order. We can help and
guide your choice with expert staff who are knowledgeable,
experienced and very helpful - call 01540 673648.
Moisture content:
7% +/- 2%
Tongue and Grooved on all 4 side
If to be used as flooring - 2m lengths can be produced
Wallgrain
Seared Larch
Wallgrain
Controlled burning, smoking and searing add a new dimension
to this European Larch panelling. These innovative techniques
highlight the sinuous grain pattern, warm mellow earthy tones
and dark seared finishes to create dramatic effects.
Seared Larch
The play of colours from deep amber to burnt umber ooze
decadence and exude warmth and vitality whilst the knotting
is emphasized by the burnt and brushed surface. Sealed
with Complex HU005 Universal Wax - a high quality, nonlayer forming, wood finishing treatment based on natural raw
materials. The solvent used is an extremely pure ISOPAR fluid
and particularly suitable for use in offices, hotels, care homes
and nurseries.
www.russwood.co.uk/interiors/wall-panelling/wallgrain
SPECIFICATION
Width:
138mm
Length:
4.0m (2m lengths available on request)
Thickness:
19mm
Moisture content:
13% +/- 2%
Tongue and Grooved on all 4 side
If fire retardant is a requirement, Wallgrain should be
ordered without Universal Wax Sealant. Please call to ask
advice on Fire retardants.
Wallscape
Fired Larch
Random textures, flowing, rugged
Wallscape
The randomly formed Wallscape creates a flowing irregular wall
panel that allows designers to apply a rugged natural finish.
The individual pieces can be applied in any order, helping you to
create a bespoke finish every time.
Fired Larch
m
0m
Deep earthy reds and browns are a signature40feature
of these
panels creating a diverse play of colour. The Larch is heat
treated at 190 degrees centigrade, improving dimensional
stability for internal use. The surfaces are band saw cut,
24 but with an
brushed or both giving it an appearance of time
past
mm
mm
45 rating.
improved dimensional stability and durability
SPECIFICATION
The pieces of timber are various set sizes and
therefore when they are arranged, a unique 3
dimensional ‘wall scape’ emerges. The pieces are
easily arranged against a hidden frame, as each piece
m
of varying
0 mdimension and is tongue and groove on all
40
four sides.
Total Coverage of one pack = 0.8 sqm.
1
45
24
2
m
mm mm mm
3.2 x 40 mm 00 m
0
0
4
4
www.russwood.co.uk/interiors/wall-panelling/wallscape
45
mm
24
mm
20 mm
10 mm
2
1
45
mm
3
24
3.2 x 40 mm
3.2 x 40 mm
mm
10 mm
10 mm
20 mm
3.2 x 40 mm
3
20 mm
20 mm
10 mm
4
Wallscape
Fired Spruce
Wallscape
Fire Spruced
mm
The thermal treatment of the Spruce brings 4out
00 a beautiful
caramel colour in the wood and the brushing accentuates the
grain and therefore highlights the contrasts in the surface
detail. Only after thermal treatment at 212 degrees centigrade
24
do these Spruce boards show off their wonderful
hues
and
mm
mm
45
demonstrate impressive durability. The brushed
effect
leaves
beautiful figuring on the surface.
SPECIFICATION
m
of varying
40
four sides.
1
45
24
2
m
mm mm mm
3.2 x 40 mm 00 m
0
0
4
4
4
45
mm
24
mm
20 mm
10 mm
2
1
45
mm
3
24
3.2 x 40 mm
3.2 x 40 mm
mm
10 mm
10 mm
20 mm
3.2 x 40 mm
3
20 mm
20 mm
10 mm
4
Wallscape
Weathered Mixed Species
Wallscape
Weathered Mixed Species
m
0 m the irregular
A mixture of species, reclaimed and repurposed,
40
colours and textures create a wonderfully contrasting and
rugged panel. The random nature of this product will mean
that no two installations will be the same, this is an upcycled
24
product, adding environmental kudos to yourmprojects.
m
45
m
SPECIFICATION
m
of varying
40
four sides.
1
45
m
24
2
m
mm mm mm
3.2 x 40 mm 00 m
0
0
4
4
3
3.2 x 40 mm
45
mm
24
mm
20 mm
10 mm
2
1
45
mm
24
3.2 x 40 mm
mm
10 mm
10 mm
20 mm
3.2 x 40 mm
3
20 mm
20 mm
10 mm
4
Additional Information:
All solid and engineered floors are made using
European oak. They are supplied with a moisture
content of 9%+/-2% in solid oak and 8% +/- 2% in
engineered oak. Natural colour variation throughout
all grades of oak is to be expected. All of our flooring is
produced in a humidity controlled environment before
packaging and therefore once it has left our warehouse
it cannot be returned.
Smoked floors: smoking of wood is a natural reaction
which takes place in the smoking kiln between
ammonia and the tannic acid present in the oak. This
reaction produces a deeper tone to the oak. As this
is a natural reaction no influence can be made on the
colour variation within the oak. Colour variation can be
expected within the board and between each board.
Cross-sawn boards are hand-oiled and therefore take
three weeks to fully cure. Floors should not be washed
within this three week period.
Any pre-finished stair nosing’s, tread, risers and skirting
are hand oiled and hand brushed therefore will not be
an exact match to a machine oiled floor. Slight colour
variation is to be expected.
If an unfinished floor is to be purchased and hand
oiled, a machine oiled sample of flooring should not be
used as comparison for colour. Hand oiling can often
produce a much darker colour than expected – this is
due to different methods used and application rates.
Flooring must be acclimatised before installation.
Fitters must ensure that the sub floor is dry before
installation as any residual moisture will be absorbed
by the floor. It is advisable that all wet trades are
completed before installation. Contractors must also
take precautions to protect the flooring from damage
once installed. An expansion gap must be left around
the perimeter of the room and in certain cases an
internal expansion gap may be required. Natural
seasonal movement of solid wood is to be expected
– oak will expand & contract as temperature and
moisture levels change. This may leave “penny” gaps
between boards or cause slight cupping - this is all part
of the nature of wood.
UFH - must be fully regulated and running before
installation (any floor protection must be removed)
and then switched off completely during installation.
1997
Multischichtdiele
Z-156.607-1110
Emissions-geprüftes Bauprodukt
nach DIBt-Grundsätzen
Pelican Design Consultants / www.pelican-design.com
Russwood Ltd, Station Sawmill
Newtonmore, Scotland, PH20 1AR
Search Russwood UK
online and discover more
T: 01540 673 648 F: 01540 673 661
E: [email protected]
www.russwood.co.uk

Flooring Spec Guide Size

Transcription

Similar documents

Developed for maximum response at speed, Proxes T1

Engineered Flooring - Lumber Liquidators

go ahead …walk all over us!

Power, Steering Proxes R888 sticks to the track whilst you stick to

deumidificatore comfee

azendi jewellers

Reclaimed Sinker Cypress Smooth

Passion For Wood - Atkinson and Kirby

Leeds Utd

Geartek email brochure