2015 Product Catalog

Transcription

Certified to ISO 9001:2008
Family Owned for Over 90 Years
Sellstrom Manufacturing Company, located in Schaumburg, Illinois, has been
a family owned leading manufacture r of personal safety equipment for
90 years. The original company, established in 1923 as Excell Sales Company,
was located on North Clark Street in Chicago. G.E. Sellstrom (shown right)
and his wife, Ellen, were the founders. In the beginning, the principal product
manufactured was a green "eyeshade" that reduced glare both indoors
and outdoors. Early customers were barbers, office workers and picnickers.
Over the years, other products followed and the Company began to manufacture a full line of sunglasses,
motorcycle goggles and lenses for taillights, flashlights and more. During World War II, Sellstrom's total
product line went toward the war effort in developing welding helmets, faceshields, welding goggles and
more. In 1997, Sellstrom acquired RTC® Fall Protection. For over 30 years, RTC® & RTC® Custom Solutions™ has
been providing high quality, turnkey custom solutions for customers. The founder of RTC (Research Trading
Corporation) was one of the original fall protection pioneers and virtually invented the concept of Safety
Engineering and introduced a scientific orientation to understanding the influence of mechanic forces on
personal safety.
Sellstrom Manufacturing Company has grown to be one of the foremost family held personal protective
manufacturers in the nation. Sellstrom is committed to providing their customers high quality products and
the best service, all at competitive prices. In June 2012, Sellstrom moved to their new, state-of-the-art
facility in Schaumburg, Illinois and continues to grow.
How to Order
Leading distributors throughout the world stock and sell Sellstrom products. For information on your nearest
Sellstrom distributor, call SMC/RTC Customer Service Department at 1.800.323.7402 or 1.847.358.2000 or
email [email protected].
Sellstrom Manufacturing is proudly affiliated with:
ARA
ASSE
AWS
DPA
GAWDA
IDC
ISEA
ISMA
IWDC
NSC
SEDA
SMG
STAFDA
G.E. Sellstrom (center) with his son Roger Sellstrom (left) and V.P. of Sales,
Vern Clauson (right) at a Sales Meeting in Palatine, Illinois in 1962.
American Rental Association
American Society of Safety Engineers
American Welding Society
Distributor Partners of America
Gases & Welding Distributor Association
Independent Distributor Cooperative
International Safety Equipment Association
Industry Supply Manufacturers Association
Independent Welding Distributors Cooperative
National Safety Council
Safety Equipment Distributors Association
Safety Marketing Group
Specialty Tools & Fasteners Distributors Association
Sellstrom Manufacturing Company has been a leader in protecting the world's
workforce since 1923. Maintaining that leadership position necessarily entails
continuous attention to improving processes in all areas of the Company.
Sellstrom developed a quality management system, to ensure that
manufacturing procedures and product quality were constantly advancing.
Meeting the requirements for ISO 9001:2008 certification—which Sellstrom
achieved as a continuation of ISO 9001:2000 in 2000—was largely a matter of
training employees in ISO procedures and modifying the existing system to
conform to the most current ISO standards.
The ISO 9001:2008 certification from ABS Quality Evaluations (an
ISO registrar) serves as an impartial appraisal of Sellstrom's
quality management system. This achievement affirms
Sellstrom's conformance with the standards set forth by
the International Organization for Standardization, and
acknowledges the Sellstrom commitment to meeting the needs
and requirements of its customers in the global marketplace.
ISO certification requires ongoing evaluation. ABS Quality Evaluations continues
to review Sellstrom Manufacturing Company on a semi-annual basis to ensure
that the quality systems are maintained. Every aspect of our business—including
product development and design, production, testing and quality control,
packaging, shipping, customer interaction and customer satisfaction—is closely
monitored to ensure conformity with ISO standards. Our continued compliance
assures that we will provide the highest-quality products and services possible.
Standards, Marks and Certifications
EYE, HEAD & FACE PROTECTION
Protective Eyewear
Equipment & Lens Cleaning Stations
Germicidal Monitor Cabinet
Spill Control Station
Protective Goggles
Protective Mini Goggles
Protective ArcFlash Faceshields
Protective Faceshields
Hard Hats
Adapters & Accessories
4
14
15
15
16
19
20
22
28
29
GENERAL SAFETY
Hearing Protection
Knee Pads
30
30
WELDING PROTECTION
Welding Helmets
Specialty Welding Helmets
Adapters & Accessories
Auto-Darkening Filters
Filter/Cover Plates
General Information & Shade Selection Chart
Welding Goggles
FM Approved Welding Fabrics
High Temp Fabric & Blankets
Cepro® Welding Curtains, Screens & Tent
Welding Curtains & Screens
Portable Welding Screen
Sellstrom products meet rigorous standards for quality and safety performance.
The American National Standards Institute (ANSI) and the Occupational Safety
and Health Act (OSHA) are currently the popular twin criteria impacting
American industrial safety. Sellstrom products, with such exceptions as noted, EMERGENCY FIRE BLANKETS
are developed and tested to meet the requirements of these standards as well Emergency Fire & Welding Blankets
as several other standards or certifications listed below. Product specifications Emergency Fire Blanket Cabinets
are subject to change without notice.
ANSI
ASTM
CE
CSA
CUL
American National Standards Institute
Emergency Eyewash General Information
Portable & Personal Eyewash Units
ASTM International
Faucet Mounted & Drench Hose Units
Information about ASTM standards can be found at www.astm.org
Mounted Eye & Face Wash Units
Conformance European (Communauté Européenne or Conformité Européenne) Emergency Drench Shower Units
Emergency Shower Units & Stations
Information about CE standards can be found at ulstal.com
Information about CSA standards can be found at www.csa.ca
Underwriters Laboratories Canada Inc.
Information about CUL standards can be found at ulc.ca
ETL
Intertek Testing Services
NFPA
National Fire Protection Association
UL
Underwriters Laboratories Inc.
FM
Factory Mutual Standards
Information about ETL standards can be found at ulstal.com
Information about NFPA standards can be found at www.nfpa.org
56
56
EYE/FACE WASH & SHOWERS
58
58
59
60
61
61
Information about ANSI standards can be found at www.ansi.org
Canadian Standards Association
31
31
41
42
43
45
46
48
50
52
54
54
FALL PROTECTION
RTC® Fall Protection is a trademark of Sellstrom
Manufacturing Company. RTC® offers a full line of
fall protection and engineered systems, all
extensively tested to meet or exceed all mandated
safety requirements.
RTC® Fall Protection
62
Information about UL standards can be found at ulstandardsinfonet.ul.com
Information about Factory Mutual standards can be found at fmapprovals.com
PAGE 2
l
PAGE 3
1.800.323.7402
www.sellstrom.com
l
Malibu Jack™ MJ15 Features
• Anti-scratch UV absorbing
polycarbonate lens provides
outstanding impact strength
and optical clarity for rugged
industrial protection
• Four lens tint options for indoor
and outdoor work environments
where normal to low light
conditions exist
• Polarized lens option ideal for
indoor and outdoor work
environments such as
construction, utility works,
transportation, etc.
• Provides 99.9% UV Protection
• Straight temple tips relieve
pressure from the temples and
back of ears
• Reduce glare, eye strain and
fatigue with the indoor-outdoor
mirror lens option
• Great wrap-around style offers
a secure, comfortable fit
• Soft, padded nose bridge provides
a comfortable, secure fit
• Meets ANSI Z87.1+ High
Impact Standards
MALIBU JACK MJ15
& MJ20 SERIES
™
MALIBU JACK MJ16, MJ17 &
MJ18 SERIES
™
Safety eyewear for work environments that require optimal performance and
versatility. The MJ15 Malibu Jack™ Series & MJ20 Malibu Jack™ Series are stylish and only
the highest quality eye protection.
The ideal solution for
construction workers!
Durable, attractive eyewear for demanding work environments. The new
MJ16 Malibu Jack™ Series, MJ17 Malibu Jack™ Series, & MJ18 Malibu Jack™ Series
are a great option, providing several features to fit any job.
Malibu Jack™ MJ16, 17 & 20
Features
• Rubberized straight temple
tips relieve pressure from the
temples and back of ears and
hold eyewear in place
fatigue with the blue mirror
lens option
• Great wrap-around style
provides a secure,
comfortable fit
• Nose bridge prevents eyewear
from shifting and/or sliding
Impact Standards
Malibu Jack™ MJ20 Features
• Three lens tint options for
environments where normal to
low light conditions exist
• Blue mirror lens option ideal for
outdoor work environments, and
for indoor work environments
where fluorescent light
conditions exist
• Rubberized straight temple tips
relieve pressure from the
temples and back of ears and
hold eyewear in place
fatigue with the blue mirror
lens option
• Great wrap-around style provides
from shifting and/or sliding
Impact Standards
PAGE 4
Malibu Jack™ Eyewear
MJ15 Series
70801
70811
70821
70861
70863
70802
70812
70822
70862
70864
MJ20 Series
70901
70911
70951
Black Frame / Clear Lens
Black Frame / Smoke Lens
Black Frame / Indoor-Outdoor Mirror Lens
Black Frame / Polarized Lens
70861 Eyewear in Padded Hard Eyewear Case with
Micro-Fiber Bag
Silver Frame / Clear Lens
Silver Frame / Smoke Lens
Silver Frame / Indoor-Outdoor Mirror Lens
Silver Frame / Polarized Lens
70862 Eyewear in Padded Hard Eyewear Case with
Micro-Fiber Bag
Silver Frame with Blue Temple Tips / Clear Lens
Silver Frame with Blue Temple Tips / Smoke Lens
Silver Frame with Blue Temple Tips / Blue Mirror Lens
Malibu Jack™ Eyewear
MJ16 Series
70803
70813
70823
70833
Carbon Fiber Painted Frame / Clear Lens
Carbon Fiber Painted Frame / Smoke Lens
Carbon Fiber Painted Frame / Indoor-Outdoor Mirror Lens
Carbon Fiber Painted Frame / Clear Anti-Fog Lens
MJ17 Series
70804
70814
70824
70834
Gray Frame & Temple / Clear Lens
Gray Frame & Temple / Smoke Lens
Gray Frame & Temple / Indoor-Outdoor Mirror Lens
Gray Frame & Temple / Clear Anti-Fog Lens
MJ18 Series
70805
70815
70825
70835
Brown Frame / Clear Lens
Brown Frame / Smoke Lens
Brown Frame / Indoor-Outdoor Mirror Lens
Brown Frame / Clear Anti-Fog Lens
Polarized Lens Kit Available
l
PAGE 5
1.800.323.7402
www.sellstrom.com
l
X400™ Features
• Four lens tint options for
environments where normal
to low light conditions exist
• Amber lens option ideal for
low light applications
requiring high contrast
• Straight temple tips relieve
pressure from the temples
and back of ears
fatigue with the indooroutdoor mirror lens option
• Great wrap-around style offers
from shifting or sliding
• Meets MIL-PRV-31013
Ballistic High Velocity
Standards
Impact Standards
• CUL Certified to meet
CAN/CSA Z94.3 Standards
X400 SERIES
X500 STRAP SERIES
The X400™ Series is an economically priced option, yet are still stylish and
comfortable. Features many styles to fit any job including anti-fog lenses.
For work environments that require eye protection that needs to
securely stay in place, the X500™ Series provide several features to
guarantee a comfortable fit with the benefits of an anti-fog lens and a
handy quick release strap.
™
™
400
X500™ Features
500
TM
TM
TM
TM
• Two lens tint options for
• Soft, closed cell padding
along the entire inside of the
frame gently conforms to any
size face
• Quick release strap is
adjustable and very easy to
take off and on
• Features anti-fog lens
• Adjustable temple frame hinge
adjusts to the shape and size
of the user's head and ears
providing a perfect fit
provides a secure,
comfortable fit
• Soft, padded nose bridge
provides a comfortable,
secure fit
Impact Standards
X502™ Features
• Foam padding &
interchangeable strap
Impact Standards
Anti-Fog Available in all Lens Tints
X400™ Protective Eyewear Series
X400 Series
71301
71311
71321
71371
71302
71312
71322
71372
™
Clear Frame / Clear Lens
Smoke Frame / Smoke Lens
Amber Frame / Amber Lens
Indoor-Outdoor Mirror Frame / Indoor-Outdoor Mirror Lens
Clear Frame / Clear Anti-Fog Lens
Smoke Frame / Smoke Anti-Fog Lens
Amber Frame / Amber Anti-Fog Lens
Indoor-Outdoor Mirror Frame / Indoor-Outdoor Mirror Anti-Fog Lens
X500™ Protective Eyewear Series
X500™ Series
71801
71811
X502™ Series
71910
71911
71912
PAGE 6
Black Frame with Quick Release Strap / Clear Anti-Fog Lens
Black Frame with Quick Release Strap / Smoke Anti-Fog Lens
Black Frame with foam padding & interchangeable strap. Clear
Fog-Free Lens
Black Frame with foam padding & interchangeable strap. Smoke
Fog-Free Lens
Replacement strap
l
PAGE 7
1.800.323.7402
www.sellstrom.com
l
X100™ & X200™ Features
• Rubberized straight temple
tips relieving pressure from
your temples and ears while
keeping eyewear secure
on face
• Several lens tint options for
Impact Standards
X100 , X200 , X300 SERIES
™
™
™
PROTECTIvE EYEWEAR
B
5
TM
Grafit™ Features
TM
TM
Guest-Gard®
TM
X100™, X200™ & X300™ Protective Eyewear Series
X100™ Series
70201 Black Frame with Blue Temple Ends / Clear Lens
70211 Black Frame with Blue Temple Ends / Smoke Lens
70221 Black Frame with Blue Temple Ends / Indoor-Outdoor Mirror Lens
X200 Series
70501 Black Frame with Yellow Temple Ends / Clear Lens
70511 Black Frame with Yellow Temple Ends / Smoke Lens
70521 Black Frame with Yellow Temple Ends / Indoor-Outdoor Mirror Lens
70531 Black Frame with Yellow Temple Ends / Blue Mirror Lens
™
X300 Series
70701 Clear Frame / Clear Lens
70711 Amber Frame / Amber Lens
70721 Smoke Frame / Smoke Lens
70731 Indoor-Outdoor Mirror Frame / Indoor-Outdoor Mirror Lens
Small Frame Sizes
70702 Small Clear Frame / Clear Lens
70722 Small Smoke Frame / Smoke Lens
™
PAGE 8
• Contouring sideshields featuring
adjustable temples
• Shade 5 IR lens option for
welding affiliated operations
such as medium to heavy
torch soldering, brazing and
cutting operations
Impact Standards
• CUL Certified to meet CAN/CSA
Z94.3 Standards
TM
X300™ Features
• Several lens tint options for
• Amber lens option ideal for
low light applications
requiring high contrast
provides a secure,
comfortable fit
Impact Standards
B5™ Features
• Contouring 30mm sideshields
• Shade 3 or 5 IR lens option
for soldering, brazing &
cutting operations
• Graphite compound frame with
5 1/2" (14.61 cm) temples
polycarbonate lens
• Weighs only 1.2 oz. (34.02g)
Impact Standards
X35™ Features
Protective Eyewear Series
B5™ Series
74701
Black Frame with Adjustable Temples/ Clear Lens
74751
Black Frame with Adjustable Temples/ Shade 5 IR Lens
Grafit™ Series
76251
Black Frame with Shade 5 Lens
X35™ Series
72903
Black Frame with Shade 3 Flip-Up Lens
72905
Black Frame with Shade 5 Flip-Up Lens
Guest-Gard® Visitor Spec Series
79103 Clear Frame with Sideshields / Clear Lens (Dispenser Box of 24)
79108 Clear Frame with Sideshields / Clear Lens in Bulk (Box of100)
• Shade 3 or 5 lens option
for soldering, brazing and
cutting operations. Features
adjustable temples
Impact Standards
Guest-Gard visitor Spec
Features
®
•
•
•
•
•
Fits over most
prescription glasses
Universal fit nose bridge
Fixed sideshields
and brow guard
Custom imprint
program available
Meets ANSI Z87.1+ High
Impact Standards
l
PAGE 9
1.800.323.7402
www.sellstrom.com
l
Dyno-Mites™ Kid Features
• Designed to comfortably fit a child
or small adult face
• Soft, clear nose pads prevent
slipping and sliding
outstanding impact strength and
optical clarity
• Adjustable temples provide a perfect fit
Impact Standards
PROTECTIvE EYEWEAR
PROTECTIvE EYEWEAR
Matrix™ Features
• Great wrap-around style provid-
ing a secure, comfortable fit
• Four lens options, including a
light gold mirror lens which
significantly reduces glare,
relieving eye strain and fatigue
Impact Standards
Firebirds™ Features
relieving pressure from your temples
and ears while keeping eyewear
secure on face
• Wrap-around style
• Anti-scratch UV absorbing polycarbonate lens provides outstanding
impact strength and optical clarity
for rugged industrial protection
Impact Standards
Maxview Features
®
• Fits over most
• Durable frame and integral
lens construction
Impact Standards
Atlantis™ Features
• Great wrap-around style providing
• Stylish frame following latest
fashion trends
• Anti-scratch UV absorbing polycarbonate lens provides outstanding
• Four lens options, including a light
blue lens which significantly reduces
glare from fluorescent lighting
Impact Standards
Avalanche™ Features
• Rubberized straight temple tips relieving
pressure from your temples and ears
while keeping eyewear secure
• Several lens tint options for indoor and
outdoor work environments where
normal to low light conditions exist
• Anti-scratch UV absorbing polycarbonate lens provide outstanding
Impact Standards
PAGE 10
Maxview II Features
®
TM
Dyno-Mites® Kid Series
70301 Small Red, White and Blue Frame w/ Adjustable Temples / Clear Lens
70302 Replacement Clear Nose Piece / 6 pack
Firebirds™ Series
73401 Clear Frame / Clear Lens
73421 Amber Frame / Amber Lens
73471 Smoke Frame / Smoke Lens
73481 Smoke Frame / Blue Mirror Lens
73491 UV 400 Frame / Light Gold Mirror Lens
Atlantis™ Series
70601
Black Frame/ Clear Lens
70611
70621
Black Frame / Amber Lens
Avalanche™ Series
74101
Black Frame/ Clear Lens
74151
Black Frame / Indoor-Outdoor Mirror Lens
74171
Matrix™ Series
73501 Clear Frame with Black Temples / Clear Lens
73521 Light Gold Mirror Frame with Black Temples / Light Gold Mirror Lens
73571 Smoke Frame with Black Temples / Smoke Lens
73581 Blue Mirror Frame with Black Temples / Blue Mirror Lens
Maxview® Series
79301 Clear Frame / Clear Scratch-Resistant Hardcoated Lens
79302 Clear Frame / Clear Uncoated Lens
Maxview® II Series
73901 Clear Frame / Clear Uncoated Lens
73921 Clear Frame / Clear Scratch-Resistant Hardcoated Lens
• Great wrap-around style providing
Impact Standards
PT9™ Features
relieve pressure from your
temples and ears while keeping
eyewear secure on face
• Anti-scratch polycarbonate lens
provides outstanding impact
strength and optical clarity
Impact Standards
• CUL Certified to meet CAN/CSAZ94.3 Standards
PT9™ Series
74201 Blue Frame with Black Temples Tips / Clear Lens
74241 Smoke Frame with Black Temples Tips / Indoor-Outdoor Mirror Lens
74271 Smoke Frame with Black Temples Tips / Smoke Lens
l
PAGE 11
1.800.323.7402
www.sellstrom.com
l
Sebring 400 & 600 Features
®
• Wide, single piece lens
•
•
•
•
•
•
•
•
•
•
•
provides incredible clarity
and protection
Four lens tint options for
Anti-scratch UV absorbing
Provides 99.9% UV Protection
Excellent side protection
Reduce glare, eye strain &
fatigue with the silver mirror
lens option
Adjustable temples offer a
secure, comfortable fit
Nose bridge prevents eyewear
from shifting or sliding
Shade 5 and 6 IR lens option
for welding affiliated
operations such as soldering,
brazing & cutting. Shade 6
Cobalt Blue option ideal for gas
welding applications such as:
aluminum, cast iron, metal, gas
& glass furnace.
Impact Standards
CUL Certified to meet
(except for shade 6 and
Cobalt Blue models)
Sebring 400 Eyewear Series is
also CE Certified (except for
models noted)
®
Sebring 600 MAG Features
®
• Bifocal Reader in lens
• Wide, single piece lens
•
•
•
•
provides incredible clarity
and protection
Excellent side protection
Adjustable temples offer a
secure, comfortable fit
Impact Standards
CUL Certified to meet CAN/CSA
Z94.3 Standards
PROTECTIvE EYEWEAR
Outstanding peripheral vision and optic clarity.
• Straight temple tips relieving
pressure from your temples
and ears
fatigue with the indoor-outdoor
mirror lens option
Impact Standards
Accessories
• Properly protecting and storing
TechnoSport II™ Series
74801 Black Frame with Adjustable Temples / Clear Lens
74841 Black Frame with Adjustable Temples / Indoor-Outdoor Mirror Lens
(Not CE Certified)
74871 Black Frame with Adjustable Temples / Smoke Lens
your safety eyewear can extend
quality and life span of your
equipment, saving you time
and money
EYEWEAR ACCESSORIES
Sebring® 400 Series
76301 Black Frame with Adjustable Temples / Clear Lens
76341 Black Frame with Adjustable Temples / Silver Mirror Lens (Not CE Certified)
76371 Black Frame with Adjustable Temples / Smoke Lens
76701 Red, White and Blue Frame with Adjustable Temples / Clear Lens
76771 Red, White and Blue Frame with Adjustable Temples / Smoke Lens
(Not CE Certified)
Small Frame Sizes
73801 Small Black Frame with Adjustable Temples / Clear Lens
73802 Small Blue Frame with Adjustable Temples / Clear Lens
Cobalt Blue Lens Option
76361B Black Frame with Adjustable Grey Temples / Shade 6 Cobalt Blue Lens
Sebring® 600 Series
74601 Clear Frame with Adjustable Temples / Clear Lens
74651 Shade 5 IR Frame with Adjustable Temples / Shade 5 IR Lens
74661 Shade 6 IR Frame with Adjustable Temples / Shade 6 IR Lens
74671 Smoke Frame with Adjustable Temples / Smoke Lens
Sebring® 600 MAG Bifocal Series
74615 Clear Frame with Adjustable Temples / Clear Lens with 1.50 Bifocal Reader
PAGE 12
PROTECTIvE EYEWEAR
TechnoSports II™ Features
Protective Eyewear Accessories
Eyewear Case
79901 Black Eyewear Case. Padded. Comes with Clip Attachment.
Protective Micro-Fiber Bags
79903 Black Malibu Jack™ Eyewear Micro-Fiber Bag with Drawstring
79904 Black Sellstrom Safeguards Eyewear Micro-Fiber Bag with Drawstring
79905 Black Odyssey II Goggle Micro-Fiber Bag with Drawstring
79906 Black Odyssey˜ II Wildland Fire Goggle Micro-Fiber Bag with Drawstring
®
®
®
l
PAGE 13
1.800.323.7402
www.sellstrom.com
l
LENS AND EqUIPMENT CLEANING
Sta-Clear
CABINET AND STATIONS
Sellstrom's Model 2000 Monitor Germicidal
Cabinet has been a top seller in the education
and medical industry for decades!
®
®
• Germicidal cabinet sanitizes goggles
•
•
Pre-Moistened Lens
Cleaning Tissue Packets
Pre-Moistened
Equipment Cleaning
Packets
Model 2000 Monitor®
Germicidal Cabinet Features
•
•
• Cleans glass and plastic safety glasses
and goggles
• Anti-static, anti-fog cleaning solution impregnated in tissues.
•
•
•
•
•
Contains no silica; scratch free.
Alcohol-free pads feature the active ingredient benzalkonium
chloride and will not harm even the most sensitive rubber
facepieces. Also available with 70% alcohol.
Convenient and easy to use single packets
Large towelette measures 5" x 8" (12.70 cm x 20.32 cm)
Handy self-dispensing box contains 110 packets
Dispenser box may be wall mounted or rest on table
22184
Sel-Kleen™ Pre-Moistened Alcohol Equipment
Cleaning Tissue Packets in Self-Dispensing Box
(110 Per Box)
Sel-Kleen™ Pre-Moistened Non-Alcohol Equipment
Cleaning Tissue Packets in Self-Dispensing Box
(110 Per Box)
22185
• Anti-static, anti-fog cleaning solution impregnated
•
•
•
•
•
•
•
in tissues
Contains no silica so lenses stay scratch-free
Cleans without streaking or leaving a static residue
Convenient and easy to use single packets
One step cleaning, no need for a dry tissue
Large towelette measures 5" x 8"(12.70 cm x 20.32 cm)
Handy self-dispensing box contains 110 packets
Also available
Dispenser box may be wall mounted or rest on table
in a
23491
23492
Sta-Clear Pre-Moistened Lens Cleaning
Tissue Packets in Self-Dispensing Box (110 Per Box)
Sta-Clear Pre-Moistened Lens Cleaning Tissue Packets
in Re-Sealable Personal Pak (40 Packets/Pak)
Sta-Clear Pre-Moistened Lens Cleaning Tissue Packets
in Bulk (1,000 Packets/Box)
®
• Complete with water activated
Sta-Clear
Lens Cleaning Tissues
®
•
•
•
•
•
•
•
•
Water activated anti-static, anti-fog tissues
Anti-static, anti-fog cleaning solution impregnated in tissues
Not for fog-free lenses
Needs only water to activate
Contains no silica so polycarbonate lenses stay scratch-free
1,000 tissues per box
Tissue box measures 51⁄4" x 41⁄2" x 41⁄8" (13.02 x 12.07 x 11.75 cm)
Tissue measures 41⁄2" x 101⁄2" (11.43 x 27.31 cm)
23480
PAGE 14
Sta-Clear Lens Cleaning Tissues in
Self-Dispensing Box (1,000 Tissues Per Box )
®
anti-static, anti-fog tissues and
pump spray bottle
Anti-static, anti-fog cleaning solution
impregnated in tissues
Not for fog-free lenses
Needs only water to activate
Opening for litter-free disposal of used tissues
Contains no silica so polycarbonate lenses stay scratch-free
1,000 Tissues per box
Tissue measures 41⁄2" x 101⁄2" (11.43 x 27.31 cm)
23469
23470
Order one for your school today!
®
®
•
•
•
•
•
•
•
•
Personal Pak
23490
•
•
®
Sta-Clear
Lens Cleaning Stations
Only"
“Water rate
nO sepa iOn
sOlut !
needed
•
Sta-Clear Disposable Lens Cleaning Station
(includes water bottle with pump and 1,000 tissues)
8 5/8" W x 6 1/2" H x 5 3/8" D
Sta-Clear Metal Lens Cleaning Station
(includes water bottle with pump and 1,000 tissues)
8 3/4" W x 6 1/2" H x 5 1/4" D
®
®
Replacement Parts
23471 Plastic Water Bottle (16 oz) with Pump
23474 Lock for #23470 unit
23475 Key for #23470 unit
•
and/or eyewear for the next use in
just 5 minutes!
Model 2000 has an average kill rate
of 99.2% during a 5 minute cycle,
controlled by a timer
Sturdy 24 gauge white enameled steel
cabinet features interlocking doors
with tamper-resistant latches and can
be locked with (2) keys provided
Multiple units are keyed alike
No direct UV radiation escapes from
cabinet when in use, and the cabinet
shuts off automatically if double
doors are opened (Pilot light confirms
UV lamp is in use)
Universal rack holds (6) glasses or
(5) goggles per level on (8) shelves
Wall or shelf mountable with a 7'
(2.13 m) grounded electrical cord
No assembly required
Cabinet Dims:
32" H x 24.5" W x 9.5" D
Underwriters Laboratories Inc.®
Listed: File #E140818
CUL Certified
Model 2000 Monitor Germicidal Cabinet
•
90494
10-10 Spill Control
Station Features
®
Model 2000 Monitor Cabinet with germicidal lamp and
universal rack. Holds 6 glasses or 5 goggles to a shelf;
8 shelves total. Does not include glasses or goggles.
Weighs 45 pounds.
Replacement Parts
90496 Universal Rack
90479 Keys for Monitor (2)
90481 Ballast
90482 Lamp
90483 Timer - 5 minutes
90484 Interlock Switch
90486 Timer Knob & Face Plate
90487 Electrical Cord Set (7 foot cord)
90488 Locking Rod Assembly, Lock and 2 Keys
®
10-10 Spill Control Station
68000 10-10 Spill Control Station with Contents.
Spill Pillows in Box Quantity
68120 Standard Spill Control Pillows (Absorbs up to 1 Quart)
Carton/12
• Each station contains 12 standard
spill control pillows and 2
hydrofluoric acid pillows, each with
an absorbing capacity of 1000ml (1
quart). For protection of cleanup
personnel, it is also equipped with 2
pairs of chemical splash goggles, 15
sorbent pads, 2 pairs of gloves (size
large), 15 hazardous waste bags and
ties, and 2 total body Saranex
Tyvek coveralls to provide head-totoe protection; one piece with hood,
foot covers and a zipper front.
• Universal spill control pillows
absorb and contain all types of
acid, caustic, solvent or oil
• Cabinet Dims:
30.75" H x 15" W x 11.5" D
®
®
Replacement Parts
68130 Hydrofluoric Acid S.C. Pillows (Absorbs up to 1 Quart)
Carton/4
68140 Sorbent Pads/Blankets (Absorbs up to 1/2 Pint)
Carton/15
68155 Total Body Saranex Tyvek Coveralls (Size Large)
68160 1 Pair of Protective Gloves (Size Large)
88200 1 Pair of Chemical Splash Goggles
68180 Hazardous Waste Bags with Ties, Carton/15
®
®
l
PAGE 15
1.800.323.7402
www.sellstrom.com
l
Odyssey® II Industrial &
Chemical Splash Goggle
• Sealed dual UV absorbing polycarbonate lens
• Anti-fog on the inside / Anti-scratch on
the outside
• Ultra comfortable, soft goggle body,
PROTECTIvE GOGGLES
PROTECTIvE GOGGLES
The BEST goggles on the
market. Economically priced,
stylish & comfortable!
snug seal
• Indirect vents on top and bottom
•
•
protecting against liquids and dust
while permitting indirect ventilation
Complete panoramic vision
Fits over prescription eyewear
ODYSSEY II GOGGLES
®
INDUSTRIAL GOGGLE
80200 Blue Indirect Vented Body / Sealed Dual Scratch-Resistant, Anti-Fog Clear Lens
80242 Replacement Sealed Dual Scratch-Resistant, Anti-Fog Clear Lens
80246 Replacement Cloth Flame Retardant Strap
Odyssey® II Clean Room Goggle
• Can be autoclaved
• Reusable, which provides a longer use of life,
•
•
•
•
•
CHEMICAL SPLASH GOGGLE
80201 Blue Indirect Vented Body / Sealed Dual Scratch-Resistant, Anti-Fog Clear Lens
80202 Blue Indirect Vented Body / Sealed Dual Scratch-Resistant, Anti-Fog Amber Lens
80203 Blue Indirect Vented Body / Sealed Dual Scratch-Resistant, Anti-Fog Smoke Lens
80249 Replacement Sealed Dual Scratch-Resistant, Anti-Fog Amber Lens
80250 Replacement Sealed Dual Scratch-Resistant, Anti-Fog Smoke Lens
80251 Replacement Grey Neoprene Strap
less waste and a lower cost of ownership
Depending on your particular
autoclaving equipment, we provide a
non-vented goggle body with a clear
anti-fog lens as well as a top vented
goggle body with a clear uncoated lens
High temperature resistant
Adjustable latex free neoprene wide band
Odyssey® II Wildland Fire Goggle
• Sealed Dual UV absorbing polycarbonate lens
• Anti-fog on the inside / Anti-scratch on
100% FOG-FREE
Even in the worst conditions
the outside
• Non-vented body lined with a soft closed cell
•
•
•
•
•
foam seal for a snug fit allowing no smoke,
liquids or contaminants from entering
Adjustable fire retardant wide band
NFPA 1977 Third Party Certified.
TACTICAL GOGGLE
80290 Black High Temp Body / Sealed Dual Scratch-Resistant, Anti-Fog Clear Lens
80291 Black High Temp Body/ Sealed Dual Scratch-Resistant, Anti-Fog Amber Lens
80293 Black High Temp Body / Sealed Dual Scratch-Resistant,Anti-Fog Orange Lens
80294 80290 Goggle w/ an extra replacement 80242 lens in black nylon goggle case
80249 Replacement Sealed Dual Scratch-Resistant, Anti-Fog Amber Lens
80248 Replacement Sealed Dual Scratch-Resistant, Anti-Fog Orange Lens
80246 Replacement Black Cloth Elastic Flame Retardant Strap
• Sealed Dual UV absorbing polycarbonate lens
• Anti-fog on the inside, anti-scratch on
the outside
Lined with a soft closed cell foam seal.
Odyssey® II Shade 5 IR Cutting
Goggle
• Durable Shade 5 IR Lens
• Ultra comfortable, soft goggle body,
snug seal
• Indirect vents on top and bottom
•
•
•
protecting against liquids and dust
while permitting indirect ventilation
PAGE 16
WILDLAND FIRE GOGGLE
80222 Black High Temp Body / Sealed Dual Scratch-Resistant, Anti-Fog Clear Lens
80221 80222 Fire Goggle with an extra replacement 80241 Lens in black nylon goggle case
80245 Black Nylon Goggle Case with Belt Loop Attachments
79906 Black Odyssey II Wildland Fire Goggle Protective Micro-Fiber Bag with Drawstring
®
Odyssey® II Tactical Goggle
•
•
•
•
•
CLEAN ROOM GOGGLE
80230 Blue Non-Vented Body / Clear Anti-Fog Lens [CE Certified]
80231 Blue Top Vented Body / Clear Uncoated Lens [CE Certified]
80244 Replacement Clear Anti-Fog Lens for 80230 Goggle
80252 Replacement Clear Uncoated Lens for 80231 Goggle
80251 Replacement Grey Neoprene Strap
Re-Use and Save...
Odyssey® II Goggles are the best goggles on the market. Economically priced, stylish
and comfortable, these goggles are made in a variety of styles. Instead of using the
traditional sterile, single use goggles for your clean room for instance, stop and
consider a more efficient and economical solution. The Odyssey® II Clean Room Goggles
are reusable, providing a longer use of life, less waste and most important, a lower
cost of ownership. And the Odyssey® II Wildland Fire Goggles are the only third-party
certified NFPA 1977, 2011 Ed. goggles on the market.
SHADE 5 CUTTING GOGGLE
80211 Black High Temp Body / Shade 5 IR Lens - Packaged in a Point of Sale Clam
80210 Black High Temp Body / Shade 5 IR Lens - Packaged in a Polybag
80243 Replacement Shade 5 IR Lens
80221 with Black Padded
Nylon Case
l
PAGE 17
1.800.323.7402
www.sellstrom.com
l
Odyssey® Chemical Splash
Goggle
polycarbonate lens
• Ultra comfortable, soft
goggle body, snug seal
• Extra wide peripheral vision
• Fits over most
• Easy strap adjustment
• Indirect vents on top and
bottom protecting against
liquids and dust while
permitting indirect ventilation
• Extra wide peripheral vision
• Fits over prescription eyewear
Impact Standards
Z94.3 Standards
• CE Certified
PROTECTIvE GOGGLES
880, 881, 882 & 830 GOGGLES
ensures proper fit
elastic headband
• Fits over most
• Three vent options to fit your
every need
• Replaceable fog-free lens
Impact Standards
Z94.3 Standards
All Sellstrom goggles provide a secure comfortable fit. Quality materials
and design features such as the soft flange at the top and bottom
insure the best fitting goggle for any job. Goggle options include three
different vent styles.
• UV absorbing
polycarbonate lens
• Available in Anti-fog
• Green tinted flexible PVC body
ensures proper fit
• Adjustable 18" green
elastic headband
• Fits over most
• Three vent options to fit your
every need
• Replaceable .060" distortionfree polycarbonate fog-free lens
Impact Standards
Z94.3 Standards (excludes
Advantage Economy
Padded models)
• CE Certified
830 Mini Goggles
• Lightweight, green tinted PVC
880 Cover Goggle Series
830 Mini Goggle Series
Protective Goggle Series
Three vent Styles
Protective Goggle Series
Advantage™ Economy Goggles
81000 Direct Vent, Green Tinted Goggle Body / Clear Lens
81010 Direct Vent, Green Tinted Goggle Body / Clear Anti-Fog Lens
81200 Indirect Vent (White Vents), Green Tinted Goggle Body / Clear Lens
81210 Indirect Vent (White Vents), Green Tinted Goggle Body / Clear Anti-Fog Lens
81220 Non-Vented, Green Tinted Goggle Body / Clear Anti-Fog Lens
22448 Replacement 18" Green Elastic Headband (1 Bag / 12)
Advantage™ Economy Padded Goggles
81310 Direct Vent, Green Tinted Padded Goggle Body / Anti-Fog Clear Lens
81320 Indirect Vent, Green Tinted Padded Goggle Body / Anti-Fog Clear Lens
81330 Non-Vented, Green Tinted Padded Goggle Body / Anti-Fog Clear Lens
22448 Replacement 18" Green Elastic Headband (1 Bag / 12)
PAGE 18
• UV absorbing polycarbonate lens
• Available in Anti-fog
• Green tinted flexible PVC body
• Adjustable 18" green
Advantage™ Economy Goggles
• Direct vent provides maximum
air flow and protection
against grinding, chipping
and cutting operations
• Indirect vent protects against
liquids, dust and smoke while
• Non-vent offers best protection
from liquid and dust
880, 881 & 882 Goggles
Cover Goggles - 880 Series - Direct Vent
88000 Direct Vent, Green Tinted Goggle Body / Clear Lens
88003 Same as 88000, 150 Bulk Nested / Case
88006 Same as 88000, Poly Bagged 120 / case
88010 Direct Vent, Green Tinted Goggle Body / Clear Anti-Fog Lens
Cover Goggles - 881 Series - Non-Vented
88110 Non-Vented, Green Tinted Goggle Body / Clear Anti-Fog Lens
Chemical Splash Goggles - 882 Series - Indirect Vent Lens
88200 Indirect Vent (Black Vents), Green Tinted Goggle Body / Clear Lens
88206 Same as 88200, Poly Bagged 108 / Case
88210 Indirect Vent (Black Vents), Green Tinted Goggle Body / Clear Anti-Fog Lens
88216 Same as 88210, Poly Bagged 108 / Case
Replacement Parts and Lenses for 880, 881 and 882 Series
22448 Replacement 18" Elastic Headband (1 Bag / 12)
84001 Replacement Clear Lens
84011 Replacement Clear Anti-Fog Lens
84021 Replacement Green Acetate Lens
Mini Economy Goggle Series
83000 Direct Vent, Green Tinted Mini Goggle Body / Clear Lens
83010 Direct Vent, Green Tinted Mini Goggle Body / Clear Anti-Fog Lens
83200 Indirect Vent, Green Tinted Mini Goggle Body / Clear Lens
83210 Indirect Vent, Green Tinted Mini Goggle Body / Clear Anti-Fog Lens
22448 Replacement 18" Elastic Headband (Bag / 12)
•
•
•
•
•
•
•
body gently conforms to face for
Ideal for smaller faces and
small spaces
Indirect vent protects against
liquids and dust while permitting
indirect ventilation
Direct vent provides max. air flow
and protection against grinding,
chipping and cutting operations
UV absorbing polycarbonate lens
Adjustable 18" green
elastic headband
Meets ANSI Z87.1 Standards
CUL Certified to meet CAN/CSA
Z94.3 Standards
l
PAGE 19
1.800.323.7402
www.sellstrom.com
l
ArcFlash™ Faceshield Features
•
•
•
•
•
•
•
•
•
•
•
9.9 Cal/cm2 Arc Rating
Specially formulated window
Molded window provides the
best possible clarity with
absolutely no distortion
Excellent color definition
Rugged, polycarbonate shield
is impact and chemical
splash resistant
Faceshield curves naturally to
fit facial contours; ensuring
reliable protection
Available with or without hard
hat, with a hard hat adapter or
as a window by itself
Impact Standards
Meets ASTM F-2178-06
Standards
Meets NFPA 70E Standards
ArcFlash™ Faceshield Series
PROTECTIvE FACESHIELD
Complete Faceshield Unit with Hard Hat
31202 Black Crown/Chin Guard, 8" x 15' x .060" Molded Polycarbonate
9.9 Cal Anti-Fog Window with a White Six Point Suspension Hard Hat
with Ratchet Headgear
9.9 Cal Window
Faceshield and Crown/Chin Guard with Ratchet Headgear
31200 Black Crown/Chin Guard, 8" x 15" x .060" Molded Polycarbonate
9.9 Cal Anti-Fog Window with Ratchet Headgear
Window Options
31220 8" x 15" x .060" Molded Polycarbonate 9.9 Cal Window with
black chin guard
31222 20" x 9 3/4" x .060" Molded Polycarbonate 12 Cal Window
Protect yourself from low level arc flash hazards using the Sellstrom ArcFlash™
faceshield system. Arc flash is created by an electric arc and can result in an
explosive condition releasing electromagnetic energy, fragments and
molten metals that can cause serious injury. Sellstrom's ArcFlash™ faceshield
features a specially formulated window that provides excellent color
definition, giving the user the best possible VISION and PROTECTION they
need to perform their job.
Combination arc flash
faceshield with slotted
hard hat
9.9 Cal Window
Impact absorbing six
point hard hat with
ratchet suspension
Universal slot adapter
offers simple method of
attaching faceshield to
most slotted hard hats
Hard Hat Adapter Options
61600 Dielectric Non-Slotted Hard Hat Adapter for Faceshield Window
61610 Dielectric Slotted Hard Hat Adapter for Faceshield Window
61970 Dielectric Slotted Hard Hat Adapter for Faceshield Window & Crown
Rugged, polycarbonate
shield is impact and
splash resistant
Excellent
color definition
12 Cal Window
Ratchet headgear
suspension allows
user to adjust size
and tighten at the
turn of a knob
Arc Rating
of 9.9 Cal/cm2
PAGE 20
Faceshield with Hard Hat Adapter (Hard Hats Not Included)
31201 Black Crown/Chin Guard, 8" x 15" x .060" Molded Polycarbonate
9.9 Cal Anti-Fog Window with 61970 Dielectric Slotted Hard
Hat/Faceshield Window and Crown Adapter
Other Options
31223 20" 12 Cal Window with 61610 Hard Hat Adapter & 69500
31224 20" 12 Cal Window with 61610 Hard Hat Adapter
Multi-purpose Faceshield Series
Complete Unit. Ratchet Headgear Included
30201 8" x 12" x .078" Clear Polycarbonate Spherical Window with
Ratchet Headgear
30204 8" x 15.5" x .078" Clear Polycarbonate Spherical Window with
Ratchet Headgear
30205 9" x 15.52" x .078" Clear Polycarbonate Spherical Window with
Ratchet Headgear
Molded window providing
the absolute best in clarity
with no distortion
Faceshield curves naturally to fit facial contours;
ensuring reliable and complete protection
l
1.800.323.7402
PAGE 21
www.sellstrom.com
l
DP4™ Faceshield Features
DP4 Standard Faceshields
™
Multi-Purpose Faceshields
Cutting
The patented DP4™ Faceshield combines a clear anti-fog window with a flip-down
IR window, providing uninterrupted protection for grinding, brazing and cutting
operations. The shield curves naturally to fit facial contours—ensuring reliable
protection from splash, particles and flying debris. Ratchet headgear suspension
allows user to adjust size and tighten at the turn of a knob. Rugged, polycarbonate
window is impact and chemical splash resistant. This convenient system gives you
the flexibility to handle various types of grinding, brazing and cutting operations all
with one faceshield!
Shade 6 Cobalt Blue
option ideal for gas
welding applications
for aluminum and cast
iron as well as in
metal, gas and glass
furnace operations
Our Shade 8 IR option is the first
faceshield in the market to meet
ANSI Z49.1 Standards for Plasma
Cutting!
Brazing
US Patented Product
US 6,591,424
DP4™ Multi-Purpose Faceshields
Comes With A Full Face Clear Anti-fog Window And A Flip-up IR Window
Ratchet Headgear Included
32151 Black Crown, Ratchet Headgear with a Clear Anti-fog Window and Shade
5 IR Flip Front Window
32161B Black Crown, Ratchet Headgear with a Clear Anti-fog Window and Shade
6 Cobalt Blue Flip Front Window
DP4™ with Universal Slot Hard Hat Adapter (For Slotted Hard Hats)
Crown, Window and Universal Slot Adapter Only. Hard Hat Not Included
32012 Black Crown with Universal Slot Adapter with a Clear Anti-Fog Window
32032 Black Crown with Universal Slot Adapter with a Shade 3 IR Window
32052 Black Crown with Universal Slot Adapter with a Shade 5 IR Window
32152 Black Crown with Universal Slot Adapter with a Clear Anti-fog Window
and Shade 5 IR Flip Front Window
32162B Shade 6 Cobalt Blue Flip Front Window
DP4™ with Zip-Klip™ Hard Hat Adapter (For Non-Slotted Hard Hats)
Crown, Window and Zip-Klip™ Adapter Only. Hard Hat Not Included
32013 Black Crown with Zip-Klip™ Attachment with a Clear Anti-Fog Window
32033 Black Crown with Zip-Klip™ Attachment with a Shade 3 IR Window
32053 Black Crown with Zip-Klip™ Attachment with a Shade 5 IR Window
32153 Black Crown with Zip-Klip™ Attachment with a Clear Anti-fog Window and
Shade 5 IR Flip Front Window
32163B Shade 6 Cobalt Blue Flip Front Window
DP4™ Replacement Parts
Grinding
Available with Universal Slot
Adapter for Slotted Hard Hats
Available in Full Face Clear,
Shade 3 IR or Shade 5 IR
Windows
Available with Zip-Klip™
Attachment for
Non-Slotted Hard Hats
PAGE 22
Ratchet Headgear Included
32010 Black Crown, Ratchet Headgear and Clear Anti-Fog Window [CE Certified]
32030 Black Crown, Ratchet Headgear and Shade 3 IR Window
32050 Black Crown, Ratchet Headgear and Shade 5 IR Window
32000
32001
32100
32130
32150
32155
32166
32166B
32188
32011
61800
61970
Black Crown for Full Face Clear, Shade 3 & Shade 5 models
Black Crown for all Flip Front models
Replacement Clear Anti-Fog Window
Replacement Shade 3 IR Window
Replacement Shade 5 IR Window
Replacement Shade 5 IR Flip Front Window
Replacement Shade 6 Cobalt Blue Flip Front Window
Replacement Ratchet Headgear
Replacement Zip-Klip™ Adapter
Replacement Universal Slot Adapter
• Combines a full face clear
anti-fog window with a
flip-down IR window, providing
uninterrupted protection for a
variety of operations
• Shade 5 or 6 IR flip-up option
ideal for grinding, chipping and
brazing operations
• Shade 6 Cobalt Blue flip-up
option diffuses the orange glow
that strong sodium emissions
generally produce, allowing the
user to see and perform more
efficiently. This is ideal in gas
welding applications for
aluminum and cast iron as well
as in metal, gas and glass
furnace operations.
• Shade 8 IR flip-up option
• The shield curves naturally to fit
facial contours-ensuring reliable
protection from splash, particles
and flying debris
• Ratchet headgear suspension
allows user to adjust size and
tighten at the turn of a knob
• Rugged, polycarbonate window
is impact and chemical
splash resistant
• Wide panoramic vision
• Full Face Clear Anti-fog Window:
9" x 12.125" x .060"
• All Flip-Up Windows:
4.375" x 9.25" x .070"
• Molded window provides the
best possible clarity with
absolutely no distortion
• Available with slotted or nonslotted hard hat adapters
• Meets ANSI Z87.1+ High Impact
Standards (Excludes full face
shade 3 and 5 IR models)
• CUL certified to meet CAN/CSA
Z94.3 Standards
• Model 32010 is also CE Certified
l
PAGE 23
1.800.323.7402
www.sellstrom.com
l
380 Series Faceshield Features
• Crown and chin guard combo
offer extra side and bottom
protection from splashes, dust
and contaminants
• Chemical splash resistant
• Extreme impact strength
• Made in the USA
• Shade 5 IR window option
ideal for welding affiliated
operations such as medium to
heavy torch soldering, brazing
and flying debris
Impact Standards (Excludes
shade 5 IR model.)
Z94.3 Standards
• Model 38110 is also CE Certified
390 Series Faceshield Features
• Single crown style provides a
low cost, high quality option
• Made in the USA
and flying debris.
• Two headgear styles available:
ratchet headgear suspension
tighten at the turn of a knob,
while pin lock suspension
attaches to the user's head
with a locking mechanism,
similar to a belt
Impact Standards (Excludes
shade 5 IR model.)
Z94.3 Standards
• Model 39000 and 39100 are
also CE Certified
380/390 SERIES FACESHIELDS
380 Faceshield Series
Complete Unit. (Ratchet Headgear Included)
38110 Blue Plastic Crown/Chin Guard, Ratchet Headgear with 6 1/2" x 19 1/2" x .040"
Clear Window (CE Certified)
38140 Blue Plastic Crown/Chin Guard, Ratchet Headgear with 6 1/2" x 19 1/2" x .040"
Clear Anti-Fog Window
38150 Blue Plastic Crown/Chin Guard, Ratchet Headgear with 6 1/2" x 19 1/2" x .060" Shade 5 IR Window
(Meets ANSI Z87.1-2003 Standards and is CUL Certified to meet CAN/CSA Z94.3 Standards Only)
Faceshield with Universal Slot Adapter for Slotted Hard Hats. Hard Hat Not Included.
The 380/390 Faceshield Series has been a leading faceshield in the market for
decades! The shield curves naturally to fit facial contours—ensuring reliable
protection from splash, particles and flying debris. Rugged, interchangeable
windows are impact and chemical splash resistant. Two headgear styles available
that hold in place even when bending over. The crown/chin guard featured in
the 380 Series offers extra protection from splashes, dust and contaminants.
38210
38240
38250
Blue Plastic Crown/Chin Guard, Slot Adapter with 6 1/2" x 19 1/2" x .040" Clear Window
Blue Plastic Crown/Chin Guard, Slot Adapter with 6 1/2" x 19 1/2" x .040" Clear Anti-Fog Window
Blue Plastic Crown/Chin Guard, Slot Adapter with 6 1/2" x 19 1/2" x .060" Shade 5 IR Window
Faceshield with Zip-Klip™ Adapter for Non-Slotted Hard Hats. Hard Hat Not Included.
38310
38340
38350
Blue Plastic Crown/Chin Guard, Zip-Klip™ Adapter with 6 1/2" x 19 1/2" x .040" Clear Window
Blue Plastic Crown/Chin Guard, Zip-Klip™ Adapter with 6 1/2" x 19 1/2" x .040" Clear Anti-Fog Window
Blue Plastic Crown/Chin Guard, Zip-Klip™ Adapter with 6 1/2" x 19 1/2" x .060" Shade 5 IR Window
Replacement Interchangeable Windows for 380 Series
36000
36020
36040
36050
380 Series
6 1/2" x 19 1/2" x .040" Clear Window (CE Certified)
6 1/2" x 19 1/2" x .040" Green Window (Shade C)
6 1/2" x 19 1/2" x .040" Clear Anti-Fog Window
6 1/2" x 19 1/2" x .060" Shade 5 IR Window
390 Faceshield Series
Crown/Chin Guard feature offers
extra side and bottom protection
from splashes, dust and
contaminants
Complete Unit
39010 Blue Plastic Crown, Pin Lock Headgear with 8" x 12" x .040" Clear Window
39040 Blue Plastic Crown, Pin Lock Headgear with 8" x 12" x .040" Clear Anti-Fog Window
39050 Blue Plastic Crown, Pin Lock Headgear with 8" x 12" x .040" Shade 5 IR Window
39110 Blue Plastic Crown, Ratchet Headgear with 8" x 12" x .040" Clear Window
39140 Blue Plastic Crown, Ratchet Headgear with 8" x 12" x .040" Clear Anti-Fog Window
39150 Blue Plastic Crown, Ratchet Headgear with 8" x 12" x .060" Shade 5 IR Window
39210
39250
Blue Plastic Crown, Slot Adapter with 8" x 12" x .040" Clear Window
Blue Plastic Crown, Slot Adapter with 8" x 12" x .060" Shade 5 IR Window
Crown and Headgear Combos Only. Windows Not Included.
39000
39100
39200
39300
390 Series
Single crown options provide low
cost, high quality protection
Crown & Headgear options
also available
PAGE 24
380/390 SERIES FACESHIELDS
Blue Plastic Crown with Pin Lock Headgear (CE Certified)
Blue Plastic Crown with Ratchet Headgear (CE Certified)
Blue Plastic Crown with Universal Slot Adapter (For Slotted Hard Hat Attachment)
Blue Plastic Crown with Zip-Klip™Adapter (For Non-Slotted Hard Hat Attachment)
Available with a Universal Slot Adapter
for Slotted Hard Hats and a Zip-Klip™
Attachment for Non-Slotted Hard Hats
35000
37603
35020
35040
35050
35100
35120
35140
35150
37609
8" x 12" x .040" Clear Window
8" x 12" x .040" Clear Aluminum Bound Window
8" x 12" x .040" Green Window - Shade C (Dark)
8" x 12" x .040" Clear Anti-Fog Window
8" x 12" x .060" Shade 5 IR Window
8" x 16" x .040" Clear Window [CE Certified]
8" x 16" x .040" Green Window - Shade C (Dark)
8" x 16" x .060" Shade 5 IR Window
8" x 15.5" x .040" Clear Polycarbonate Window
Other Replacement Parts
27051
Ratchet Headgear Replacements (12 / box)
l
PAGE 25
1.800.323.7402
www.sellstrom.com
l
Advantage™ 301 Faceshield
Features
• A unique toggle design that
makes window assembly quick
and easy
• Shade 5 IR window option
ideal for welding affiliated
operations such as medium to
heavy torch soldering, brazing
and flying debris
• Rugged, durable, aluminum
bound window is impact and
chemical splash resistant
• Available with hard hat adapters
• Meets ANSI Z87.1+ High Impact
Standards (Excludes shade
5 IR model)
Z94.3 Standards
330 High Heat Faceshield
Features
• A durable heat resistant
fiberglass crown ideal for high
heat applications
• The shield ensures reliable
and flying debris
• Available with hard hat adapters
Impact Standards
Z94.3 Standards
301 FACESHIELD SERIES
Medical/Laboratory Faceshield Series
31140 White Plastic Crown/Chin Guard, Ratchet Headgear with 7" x 19" x .040"
32140 White Plastic Crown, Ratchet Headgear with 8" x 12" x .040"
Replacement Windows for Anti-Fog Medical/Laboratory Series
35040
36040
UNIvERSAL
FACESHIELDS
Advantage™ 301 Faceshield Series
Universal Faceshield Windows
PETG Window
37500 8" x 16" x .040 Clear PETG Window
30110 Grey ABS Crown, Ratchet Headgear with 8" x 15.5" x .040" Clear Aluminum
Bound Polycarbonate Window
30150 Grey ABS Crown, Ratchet Headgear with 8" x 16" x .060" Shade 5 IR Acetate
Window (Meets ANSI Z87.1-2003 Standards and is CUL Certified to meet
CAN/CSA Z94.3 Standards Only)
30112
Grey ABS Crown, Slot Adapter with 8" x 15.5" x .040" Clear Aluminum Bound
Polycarbonate Window
Faceshield with Zip-Klip™ Adapter for Non-Slotted Hard Hats. Hard Hat Not Included.
30113
Grey ABS Crown, Zip-Klip™ Adapter with 8" x 15.5" x .040" Clear Aluminum Bound
Polycarbonate Window
Crown and Headgear Combos. Windows Not Included.
30100
30102
30103
Grey ABS Crown with Ratchet Headgear
Grey ABS Crown with Universal Slot Adapter
(For Non-Slotted Hard Hat Attachment)
Grey ABS Crown with Zip-Klip™ Adapter (For Non-Slotted Hard Hat Attachment)
37050
37600
8" x 16" x .060" Shade 5 IR Acetate Window
8" x 15.5" x .040" Clear Aluminum Bound Polycarbonate Window
34000
34020
34040
8" x 19" x .040" Clear Window
8" x 19" x .040" Green (Shade C) Window
Other Replacement Parts
27041
PAGE 26
MEDICAL/
LABORATORY
FACESHIELD
SERIES
Ratchet Headgear Replacements (12 / box)
Acetate Windows
37000 8" x 16" x .040" Clear Acetate Window
37020 8" x 16" x .040" Dark Green Acetate Window (Glare Only)
37040 8" x 16" x .040" Clear Anti-Fog Acetate Window
37050 8" x 16" x .060" Shade 5 IR Acetate Window
Medical/Laboratory Features
• A crown and chin guard combo
offering extra side and bottom
protection from splashes, dust
and contaminants
• Non-glare finish allows for
high clarity
and flying debris
• Rugged, full coverage windows
are impact and chemical
splash resistant
• Made in the USA
Impact Standards
Universal Faceshield Features
• Universal hole pattern enables
these windows to fit in a wide
variety of faceshields
• Non-glare finish allows for
high clarity
• Meets ANSI Z87.1 Standards
100%Polycarbonate Aluminum Bound Windows
37600 8" x 15.5" x .040" Clear Polycarbonate Aluminum Bound Window
(Fits AllSafe/Kedman Faceshields Only)
37602 8" x 15.5" x .040" Clear Polycarbonate Aluminum Bound Window
(For use with Sellstrom 61900 Hard Hat Faceshield Adapter Only)
Polycarbonate Windows
37604 9" x 15.625" x .040" Clear Polycarbonate Window
37605 8" x 11" x .040" Clear Polycarbonate Window
37606 8" x 11" x .040" Clear Polycarbonate Window (Fits Fibre Metal-4118 Only)
37607 8" x 16.5" x .040" Clear Polycarbonate Window (Fits Fibre Metal-4178 Only)
37608 9.75" x 19" x .040" Clear Polycarbonate Window (Fits Fibre Metal-4199 Only)
37609 8" x 15.5" x .040" Clear Polycarbonate Window
Molded Polycarbonate Windows/Visors
37701 9" x 15" x .060" Clear Molded Polycarbonate Visor
Aspherical Windows
37703 8" x 12" x .078" Clear Uncoated Aspherical Window
37704 8" x 15" x .078" Clear Uncoated Aspherical Window
l
PAGE 27
1.800.323.7402
www.sellstrom.com
l
Hard Hat Features
• Designed to protect the top of
•
•
•
•
•
•
•
•
•
•
•
the head against falling objects
and protect the side of the
head, eyes and neck from
impacts, bumps, scrapes
and splashes
Two suspension systems:
ratchet and pin lock (see left)
Both suspension systems allow
the hard hat to be worn
backwards (brim to the rear).
This is useful when the brim
interferes with the lines of
sight, use of other equipment
or tools, or when workers just
want to have "the look".
Hard hats and suspension have
been tested and certified that
the hard hat and suspension
will provide adequate
protection while being worn
forward or backwards
You are able to verify the
reverse donning certification on
any hard hat, including
Sellstrom's, by seeing a double
reverse arrow symbol after the
ANSI Z89.1 marking
Impact absorbing six point
suspension provides lightweight,
comfortable protection
Rain gutter channels rain and
debris away from neck and face
Seven standard pad printing
colors or custom colors available
CE approved
Made in the USA
Meets ANSI Z89.1 Standards for
class G, E and C, Type I
Includes Reverse Donning and
Lower Temperature Standards
Note: Type I reduces the force of
impact to the top of the head.
Class G (general) is designed to
protect against contact with low
voltage and is proof-tested to
2,200 volts. Class E (electrical) is
designed to reduce danger of
contact with high voltage sources
and is proof-tested to 20,000 volts.
Class C (conductive) offers no
protection against contact with
electrical conductors.
6 POINT SUSPENSION
SLOTTED HARD HATS
Sellstrom hard hats are a cap style version with partial brim. Made in the USA,
these hard hats are designed as a complete system where the shell and
suspension work together.
•
•
•
•
•
•
•
•
•
Replacement Six Point Pin Lock Suspension
Replacement Six Point Ratchet Suspension
Six Point Suspension Sweatband
• Offers a simple method
•
•
of attaching faceshield
windows to hard hats
Easy to assemble
Provides an overall
tight and secure fit
61600
61610
Universal Slotted Hard Hat Adapter for
Faceshield Window and Crown or
Welding Helmets
Zip-Klip Non-Slotted Hard Hat Adapter
for Welding Helmets
Zip-Klip™ Non-Slotted Hard Hat Adapter
for Faceshield Window and Crown
™
61800
37602
37701
Quick Snap Slot Adapter
Visor Bracket
Pro Muff™ with Slot filler for Universal Use (NRR 27)
Nylon Mesh Visor 6" x 11"
61521
61540
61550
Nuisance Mask
• Lightweight, designed for
•
•
Steel Mesh Visor 6" x 11"
8" x 12" x .060" Clear Polycarbonate Window
Spark Deflector Faceshield
•
•
A type of suspension that attaches to the user's head with
a locking mechanism; similar to a man's belt. This is the
most economical suspension.
Pin Lock (Standard) Suspension
•
•
•
•
•
•
•
Accessory Slots/Slotted Hard Hats
•
Note: There is a slot on the sides of many cap-style hard hats
which allows accessories such as ear muffs, faceshields,
and other headgear to be attached.
to slotted hard hats.
Ear muffs are adjustable.
Lightweight system.
No special tools required.
Visor/Window bracket constructed
of reinforced nylon.
Mesh visor provides ventilation.
Ear Muffs NRR 27.0.
Hard Hat meets ANSI Z89.1 Standard
for class G, E and C, Type I.
61590
Hard Hat CE approved.
comfortable protection
against air pollutants and
dust.
Flexible nosepiece can be
adjusted to fit individual
facial contours.
Made from 100%
polyester fibers and is
fiberglass-free.
Universal fit.
Ideal for dusty work
areas, yard, garden and
farm work, and other
non-toxic particles.
Sweatbands
• Attaches ear muffs and faceshields
Pin Lock Suspension
Dielectric Non-Slotted Hard Hat Adapter for
Faceshield Windows
Dielectric Slotted Hard Hat Adapter for
Faceshield Windows
Anodized Aluminum Hard Hat Attachment
for 37600, 37601, 37700 & 37701 windows
8" x 15.5" x .040" Clear Aluminum
Bound Window
9" x 15" x .060" Clear Molded
Polycarbonate Visor
Other Accessories
Brush Cutter System
SUSPENSION OPTIONS
• Attach these durable and absorbent
sweatbands onto the headband of your
hard hat, faceshield or welding helmet to
absorb excessive perspiration.
Chin Strap
• Chin strap provides
Brush Cutter System includes: Orange Hard Hat with
Ratchet Suspension, Quick Snap Ear Muff Attachment,
Visor Bracket and 6" x 11" Nylon Mesh Visor
•
•
Ratchet Suspension
CUSTOM HARD HATS
• Fight the elements and remain warm with one
• Front imprint dimensions: 2" x 2"
• Side and back imprint dimensions: 2" x 3"
• Logo art will be reduced/enlarged to fit
• Universal size.
• Three tabs keep liner aligned with
back of hard hats.
Imprint colors available
•
•
Winter Liners
• Pad printing available for front, sides and
imprint area.
• Provide art in EPS or JPEG format.
• Minimum order only 24 Hard Hats.
PAGE 28
Faceshield Adapters & Attachments
Attaches ear muffs and/or faceshields to slotted hard hats.
Lightweight system.
Fits most competitive hard hats.
No special tools required.
Visor/Window bracket constructed of reinforced nylon.
Mesh visor provides ventilation.
Ear Muffs NRR 27.0.
Hard Hat meets ANSI Z89.1 Standard for class G, E and C, Type I.
Hard Hat CE approved.
61500
61505
61510
61520
Replacement Parts
t!
Customize I
A simple method of attaching faceshields or
welding helmets to non-slotted hard hats. Easy
to assemble, this
adapter provides
a tight, secure fit.
Available with any
Sellstrom Faceshield
or Welding Helmet.
quick Snap System
Ratchet Suspension
69500 White Hard Hat with Six Point Ratchet Suspension
69510 Yellow Hard Hat with Six Point Ratchet Suspension
69520 Orange Hard Hat with Six Point Ratchet Suspension
69530 Red Hard Hat with Six Point Ratchet Suspension
69540 Blue Hard Hat with Six Point Ratchet Suspension
69550 Green Hard Hat with Six Point Ratchet Suspension
A type of suspension with a quick ratchet adjusting knob
that loosens or tightens the hard hat "on the go" with a
simple turn of the knob. The pin lock suspension m ust be
removed to be adjusted.
Zip-Klip Non-Slotted Hard Hat
Adapter
61900
61970
Pin Lock [Standard] Suspension
69000 White Hard Hat with Six Point Pin Lock Suspension
69010 Yellow Hard Hat with Six Point Pin Lock Suspension
69020 Orange Hard Hat with Six Point Pin Lock Suspension
69030 Red Hard Hat with Six Point Pin Lock Suspension
69040 Blue Hard Hat with Six Point Pin Lock Suspension
69050 Green Hard Hat with Six Point Pin Lock Suspension
Ratchet Suspension
A simple method of attaching faceshields or
welding helmets to slotted hard hats. Dielectric
design that is easy to assemble and provides
an overall tight
and secure fit.
Available with any
Sellstrom
Faceshield or
Welding Helmet.
61700
Six Point Suspension Slotted Hard Hats
60100
60500
60300
Universal Slotted Hard Hat Adapter
of three winter liners.
suspension.
• Adjustable chin strap for customized fit.
62110
62240
62360
22010
22442
22450
60200
extra stability and
greater mobility.
Fits Sellstrom six point
suspension hard hats.
Fits into universal slot
adapter tabs.
Soft, absorbent band.
Adjustable.
Nuisance Dust Mask (1 Box / 50)
Vinyl Capilair Sweatband for
Faceshields
450 Sweat-Band™ all purpose,
rubber headband (1 Box / 30)
Chin strap for six point suspension
hard hats
Lightweight Yellow Canton Flannel
Medium Weight Blue Cotton Twill with Fleece Lining
Heavy Weight Green Quilted Cotton Twill with Fleece Lining
l
PAGE 29
1.800.323.7402
www.sellstrom.com
l
®
Tonedown 200 Ear Muff
Features
•
•
•
•
•
•
•
Adjustable ear cups
Comfortable tension band
Bright safety yellow color
Dielectric
Replacement parts available
Noise Reduction Rating of 26.0
Meets ANSI S3.19 Standards
HEARING PROTECTION
G a l a xy
For more information on hearing protection, we recommend visiting
The National Institute for Occupational Safety and Health (NIOSH)
website www.cdc.gov/Niosh.
De-Tone™ Ear Plugs Features
• Excellent alternative to
disposable earplugs
• Molded from extra soft PVC
• Conical shape, one size fits all
• Corded or un-corded
• Non-toxic, hypo-allergenic
• Reusable: wash with warm
water & mild soap
• Noise Reduction Rating of 24.0
• Meets ANSI S3.19 Standards
Knee-Pro Ultra Flex III™
Features
• Extremely durable hard plastic
outer shell with 1/2" closed
cell foam pad inside for
ultimate comfort
• Blue Non-Marking Grip-Strip
provides the user the security
and grip it needs in a knee
pad without leaving marks or
residue on the work surface
• Hinged with metal rivet for
ease of movement while
kneeling or walking
• Soft elastic woven straps with
reinforced sewn ends are
attached well above and
below the knee
• Lightweight for all-day use
• Speed-clips allow for quick
attachment and adjustments
200
Standard Ear Muffs
Tonedown 200
®
23400
Tonedown 200 Ear Muff
®
De-Tone™ Ear Plugs
Knees pads are important for patella
protection (the triangular bone that
covers the knee joint). Choose your style
based on the type of work or project.
Sellstrom provides knee pads in plastic,
soft rubber, and more!
Knee-Pro Ultra Flex III™ Knee Pads
96110 Knee-Pro Ultra Flex III™ Knee Pads, One
Pair and comes in Mesh Drawstring Bag
PAGE 30
• Unique Helmet design to
provide maximum face and
head protection from sparks
and spatter
• Easy auto-darkening
filter installation
• Easy cover plate installation
• Multi-adjustment
ratchet headgear
• Available in Black, Red,
Blue and Silver
• Sold with Sellstrom's
Impulse® MagSense™
auto-darkening filter
• Patented Magnetic Sensor
technology provides
outstanding performance
for the user
• No flickering or premature
switching from dark to light
• Excellent low-amp welding
• You can weld to ZERO!
Impulse® MagSense™ AutoDarkening Filter Features
Patented Solar-Powered
Auto-Darkening Filter
23461 De-Tone™ Ear Plugs, Un-Corded
23463 De-Tone™ Ear Plugs, Corded
KNEE PROTECTION
Galaxy Welding Helmet
Features
Galaxy Welding Helmets
41300
90 x 110mm Black
41340
90 x 110mm Blue
41370
Galaxy Welding Helmet 90 x 110mm Red
41310
Galaxy Welding Helmet 90 x 110mm Silver
41300-611
Galaxy Welding Helmet w/ Auto-Darkening Filter
90 x 110mm Black w/ 27611 Impulse® MagSense™‚
Variable Shade 9–13 Auto-Darkening Filter
41340-611
90 x 110mm Blue w/ 27611 Impulse® MagSense™‚
41370-611
90 x110 mm Red w/ 27611 Impulse® MagSense™‚
41310-611
90 x 110mm Silver w/ 27611 Impulse® MagSense™‚
• First filter with optical and
magnetic sensors!
• FAIL SAFE, ABSOLUTELY NO
FLICKERING
• Prevents premature
switching and flickering
where arc is temporarily
hidden or obscured
• Variable Shade 9–13
• Switching Speed:
Up to 0.1ms
• Active Viewing Area:
1.6" x 3.8"
• 3 Year Warranty—
Industry Best!
PATENTED
HEADGEARRATCHET
DESIGN
l
PAGE 31
1.800.323.7402
www.sellstrom.com
l
SmartWeld Pro™ Features
Talon3™ Features
• One of the newest
auto-darkening helmets on
the market with the latest
technological advancements
• Variable Shade 8–12 with an
extended viewing area
• Designed with the patented
"Quick Release" ratchet
headgear suspension
allowing the user to adjust
size & RELEASE at the pull
of a knob
• Solar-powered technology
• Auto-delay function
• Light sensitivity regulation
• 2 year guarantee!
• Meets ANSI Z87.1 & CSA
(Z94.3) Standards
• CE Approved
DIN 1121
• Sleek, light, ergonomically
conscience design
• Ideal for all welding
applications
headgear suspension allowing
the user to adjust size &
RELEASE at the pull of a knob
• Designed for 90 x 110M
European platform
• No adapter plates needed
• Light and extremely durable
• Rigid bib deflects
welding spatter
• Meets ANSI Z87.1 Standards &
CE Approved
The LATEST technologically
advanced auto-darkening
welding helmet
PATENTED RATCHE
HEADGEAR DESIGNT
Patented ratchet
headgear design
Auto-Darkening Filter Options
magnetic sensors!
• FAIL SAFE, ABSOLUTELY NO
FLICKERING
• Prevents premature switching
and flickering where arc is
temporarily hidden or obscured
• Switching Speed: Up to 0.1ms
• Active Viewing Area: 1.6" x 3.8"
• 3 Year Warranty - Industry Best!
Phenomenal
optics
Solar-powered autodarkening filter
automatically darkens
Maximum
protection
Broad range of
functionality
Talon3™ Welding Helmet
Helmet Only
51000
90x110mm Black Talon3™ Welding Helmet
Helmet with Auto-Darkening Filter Options
51000-611
SmartWeldPro™ Welding Helmet
23000S
SmartWeldPro™ Welding Helmet
Replacement Parts
27001
25031S
25032S
Ratchet Headgear
Back Cover Plate
Front Cover Plate
51000-60
51000-70
51000-80
19501
PAGE 32
90x110mm Black Talon3™ Welding Helmet with Impulse® MagSense™
Magnetic Sensing Variable Shade 9–13 Auto-Darkening Filter. Viewing
Area 1.6" x 3.8"
90x110mm Black Talon3™ Welding Helmet with Phantom Lite XL
Variable Shade 9–12 Auto-Darkening Filter. Viewing Area 2.36" x 3.84"
90x110mm Black Talon3™ Welding Helmet with Phantom Plus Variable
Shade 9–12 Auto-Darkening Filter. Viewing Area 1.56" x 3.86"
90x110mm Black Talon3™ Welding Helmet with Phantom GTW
Pre-Programmed Variable Shade 9–12 Auto-Darkening Filter.
Viewing Area 2.36" x 3.84"
Cover Plate for Talon3™ Welding Helmet
®
®
Phantom® Lite XL, Plus and GTW
• Battery powered with low
battery indicator
• Phantom® GTW model features
pre-programmed Grind (Sh. 3),
Torch (Sh. 5) and
Weld (Sh. 9–12) settings
• 2 Year Warranty
®
l
PAGE 33
1.800.323.7402
www.sellstrom.com
l
Trident™ Features
•
•
•
•
•
New sleek, light, ergonomic design
is ideal for all welding applications
Designed with the patented "Quick
Release" ratchet headgear
suspension allowing the user to
adjust size & RELEASE at the pull
of a knob
Lightweight and extremely durable
Rigid bib deflects welding spatter
Auto-darkening filters provide reliable
protection against UV/IR emissions,
heat, sparks and spatters in both the
light and dark state. When striking an
arc, the filter automatically darkens
and provides the following advantages;
hands free use, UV/IR protection for
your eyes and skin, faster and more
efficient welding, better quality and
less fatigue.
Impulse XvA X-Tended
viewing Area®
®
•
•
•
Edge-to-Edge Viewing Area: 3.2" x 5"
Fixed Shade 10
3 Year Warranty - Industry Best!
•
•
•
•
•
•
First filter with optical and
magnetic sensors!
Fail Safe, Absolutely NO FLICKERING
Prevents premature switching and
flickering where arc is temporarily
hidden or obscured
Variable Shade 9–13
Active Viewing Area: 1.6" x 3.8"
Impulse® Auto-Darkening Filter
•
•
•
•
•
•
•
Solar powered with dual sensors
Provides full protection against
UV/ IR rays at all shades and in
off position
Increases welding speed and accuracy
Fixed Shade 10
Switching Speed: Up to 0.1ms
Trident™ Graphic Welding Helmets
CAMO Trident™ Welding Helmet (41200CA) with Auto-Darkening Filter Options
41200CA-602 CAMO Trident™ Welding Helmet w/ Impulse XVA X-Tended
Viewing Area Fixed Shade 10 ADF
41200CA-611 CAMO Trident™ Welding Helmet with Impulse® MagSense™
Magnetic Sensing Variable Shade 9–13 ADF
41200CA-60 CAMO Trident™ Welding Helmet with Phantom Lite XL
Variable Shade 9–12 ADF
41200CA-70 CAMO Trident™ Welding Helmet with Phantom Plus
41200CA-80 CAMO Trident™ Welding Helmet with Phantom GTW
Pre-Programmed Variable Shade 9–12 ADF
®
®
®
®
With a sleek, ergonomical design, the
Trident™ Welding Helmets are ideal for all
welding applications.
®
Trident™ Welding Helmets
®
2" x 4 2" x 4 1/4" Fixed Front Trident Welding Helmets Only
41000
41011
™
Black 2" x 4 1/4" Fixed Front Trident™ Welding Helmet
Silver 2" x 4 1/4" Fixed Front Trident™ Welding Helmet
®
®
2" x 4 1/4" Fixed Front Trident™ Welding Helmets with Auto-Darkening Filter Options
41000-600 Black 2" x 4 1/4" Fixed Front Trident™ Welding Helmet with Impulse Fixed
Shade 10 ADF
41011-600 Silver 2" x 4 1/4" Fixed Front Trident™ Welding Helmet with Impulse Fixed
Shade 10 ADF
®
®
2" x 4 1/4" Lift Front Trident™ Welding Helmets Only
41100
Black 2" x 4 1/4" Lift Front Trident™ Welding Helmet
41111
Silver 2" x 4 1/4" Lift Front Trident™ Welding Helmet
®
®
®
Black Trident™ Welding Helmet Only
41200
Black 5 1/4" x 4 1/2" Fixed Front Trident™ Welding Helmet
®
Black Trident™ Welding Helmet with Auto-Darkening Filter Options
41200-602 Black Trident™ Welding Helmet with Impulse® XVA X-Tended Viewing Area®
41200-611 Black Trident™ Welding Helmet with Impulse® MagSense™ Magnetic Sensing
41200-60 Black Trident™ Welding Helmet with Phantom Lite XL Variable Shade 9–12 ADF
41200-70 Black Trident™ Welding Helmet with Phantom Plus Variable Shade 9–12 ADF
41200-80 Black Trident™ Welding Helmet with Phantom GTW Pre-Programmed Variable
Shade 9–12 ADF
®
®
®
•
Silver Trident™ Welding Helmet with Auto-Darkening Filter Options
41211-602 Silver Trident™ Welding Helmet with Impulse XVA X-Tended Viewing Area Variable
Shade 9–13 ADF
41211-611 Silver Trident™ Welding Helmet with Impulse® MagSense™ Magnetic Sensing
41211-60 Silver Trident™ Welding Helmet with Phantom Lite XL Variable Shade 9–12 ADF
41211-70 Silver Trident™ Welding Helmet with Phantom Plus Variable Shade 9–12 ADF
41211-80 Silver Trident™ Welding Helmet with Phantom GTW Pre-Programmed Variable
Shade 9–12 ADF
•
•
•
OLD GLORY Trident™ Welding Helmet (41200GL) with Auto-Darkening Filter Options
41200GL-602 OLD GLORY Trident™ Welding Helmet with Impulse XVA X-Tended Viewing
Area Fixed Shade 10 ADF
41200GL-611 OLD GLORY Trident™ Welding Helmet with Impulse® MagSense™ Magnetic
Sensing Variable Shade 9–13 ADF
41200GL-60
OLD GLORY Trident™ Welding Helmet with Phantom Lite XL Variable
Shade 9–12 ADF
41200GL-70
OLD GLORY Trident™ Welding Helmet with Phantom Plus Variable
Shade 9–12 ADF
41200GL-80
OLD GLORY Trident™ Welding Helmet with Phantom GTW
®
Silver Trident™ Welding Helmet Only
41211
Silver 5 1/4" x 4 1/2" Fixed Front Trident™ Welding Helmet
Battery powered with low
battery indicator
Phantom® GTW model features
pre-programmed Grind, Torch
and Weld settings
Variable Shade 9–12
2 Year Warranty
FACE OFF Trident™ Welding Helmet (41200FC) with Auto-Darkening Filter Options
41200FC-602 FACE OFF Trident™ Welding Helmet with Impulse XVA X-Tended Viewing
41200FC-611 FACE OFF Trident™ Welding Helmet with Impulse® MagSense™ Magnetic
41200FC-60
FACE OFF Trident™ Welding Helmet with Phantom Lite XL Variable
Shade 9–12 ADF
41200FC-70
FACE OFF Trident™ Welding Helmet with Phantom Plus Variable
Shade 9–12 ADF
41200FC-80
FACE OFF Trident™ Welding Helmet with Phantom GTW Pre-Programmed
®
•
PATENTED RAT
HEADGEAR DESCHET
IGN
®
®
®
®
®
®
®
®
®
®
®
VOLCANO Trident™ Welding Helmet (41200VC) with Auto-Darkening Filter Options
41200VC-602 VOLCANO Trident™ Welding Helmet with Impulse XVA X-Tended Viewing
41200VC-611 VOLCANO Trident™ Welding Helmet with Impulse® MagSense™ Magnetic
41200VC-60 VOLCANO Trident™ Welding Helmet with Phantom Lite XL Variable
Shade 9–12 ADF
41200VC-70 VOLCANO Trident™ Welding Helmet with Phantom Plus Variable
Shade 9–12 ADF
41200VC-80 VOLCANO Trident™ Welding Helmet with Phantom GTW Pre-Programmed
WINNER’S CIRCLE Trident™ Welding Helmet (41200WC) with Auto-Darkening Filter Options
41200WC-602 WINNER'S CIRCLE Trident™ Welding Helmet with Impulse XVA X-Tended
Viewing Area Fixed Shade 10 ADF
41200WC-611 WINNER'S CIRCLE Trident™ Welding Helmet with Impulse® MagSense™
Magnetic Sensing Var. Shade 9–13 ADF
41200WC-60 WINNER'S CIRCLE Trident™ Welding Helmet with Phantom Lite XL Variable
Shade 9–12 ADF
41200WC-70 WINNER'S CIRCLE Trident™ Welding Helmet with Phantom Plus Variable
Shade 9–12 ADF
41200WC-80 WINNER'S CIRCLE Trident™ Welding Helmet with Phantom GTW
®
®
®
®
®
PAGE 34
l
PAGE 35
1.800.323.7402
www.sellstrom.com
l
Titan® Features
Titan™ Welding Helmets
headgear suspension allowing
the user to adjust size &
RELEASE at the pull
of a knob
• Extremely durable
• Rigid bib deflects welding spatter
• Durable spatter resistant coating
• Easy filter replacement
• Tough nylon shell
• Lightweight, award winning
ergonomic design
• Made in USA
• CUL Certified to meet CAN/CSAZ94.3 Standards & CE Certified
Silver Titan™ Helmet with Silver Bezel (24411)
24411-602
Silver Helmet w/ 27602 Impulse XVA Fixed
Shade 10 ADF
24411-611
Silver Helmet w/ 27611 Impulse® MagSense™
Shade 9–13 ADF
24411-60
Silver Helmet w/ 27070-60 Phantom Lite XL
Shade 9–12 ADF
24411-70
Silver Helmet w/ 27070 Phantom Plus
Shade 9–12 ADF
24411-80
Silver Helmet w/ 27080 Phantom GTW
Shade 9–12 ADF
®
®
®
®
Blue Titan™ Helmet with Silver Bezel (24441)
24441-602
Blue Helmet w/ 27602 Impulse XVA Fixed Shade 10 ADF
24441-611
Blue Helmet w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24441-60
Blue Helmet w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24441-70
Blue Helmet w/ 27070 Phantom Plus Shade 9–12 ADF
24441-80
Blue Helmet w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
Auto-darkening filters provide
reliable protection against UV/IR
emissions, heat, sparks and
spatters in both the light and dark
state. When striking an arc, the filter
automatically darkens and provides
the following advantages; hands
free use, UV/IR protection for your
eyes and skin, faster and more
efficient welding, better quality
and less fatigue.
Impulse® XvA-XTended
viewing Area®
• Edge-to-Edge View Area: 3.2" x 5"
• Fixed Shade 10
magnetic sensors!
• Fail Safe, Absolutely No Flickering
• Prevents premature switching
and flickering where arc is
temporarily hidden or obscured
battery indicator
• Phantom® GTW model features
pre-programmed Grind, Torch
and Weld settings
• 2 Year Warranty
PATENTED RA
HEADGEAR DETCHET
SIGN
®
®
Red Titan™ Helmet with Silver Bezel (24471)
24471-602
Red Helmet w/ 27602 Impulse XVA Fixed Shade 10 ADF
24471-611
Red Helmet w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24471-60
Red Helmet w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24471-70
Red Helmet w/ 27070 Phantom Plus Shade 9–12 ADF
24471-80
Red Helmet w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
®
®
BALANCED, ERGONOMIC & LIGHTWEIGHT
Quality materials and design features insure the best helmet available for any
job. All Titan® welding helmets are made out of nylon, which is lighter than
fiberglass and extremely durable. The patented award winning design of the
Titan® provides the user with a balanced, lightweight, ergonomical welding
helmet. The 5 1/4" x 4 1/2" front load bezel provides easy loading of filter, cover,
and protective plates. Extended crown provides greater overhead protection.
Rigid bib deflects welding spatter. Uses standard size filter, cover, impact and
magnifier plates and is ideal for all welding applications.
Titans™ with Attitude Welding Helmets
America Titans™ Helmet (24400FBA)
24400FBA-602
America Titan™ w/ 27602 Impulse XVA Fixed Shade 10 ADF
24400FBA-611
America Titan™ w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24400FBA-60
America Titan™ w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24400FBA-70
America Titan™ w/ 27070 Phantom Plus Shade 9–12 ADF
24400FBA-80
America Titan™ w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
®
®
Victory Lane Titans™ Helmet (24400FYL)
24400FYL-602
Victory Lane Titan™ w/ 27602 Impulse XVA Fixed Shade 10 ADF
24400FYL-611
Victory Lane Titan™ w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24400FYL-60
Victory Lane Titan™ w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24400FYL-70
Victory Lane Titan™ w/ 27070 Phantom Plus Shade 9–12 ADF
24400FYL-80
Victory Lane Titan™ w/ 27080 Phantom GTW Shade 9–12 ADF
®
Titan™ Welding Helmets
Black Titan™ Helmet with Black Bezel (24400)
24400-602
Black Helmet w/ 27602 Impulse XVA Fixed Shade 10 ADF
24400-611
Black Helmet w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24700-60
Black Helmet w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24700-70
Black Helmet w/ 27070 Phantom Plus Shade 9–12 ADF
24700-80
Black Helmet w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
®
®
®
®
®
Finish Line Titans™ Helmet (24400FBL)
24400FBL-602
Finish Line Titan™ w/ 27602 Impulse XVA Fixed Shade 10 ADF
24400FBL-611
Finish Line Titan™ w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24400FBL-60
Finish Line Titan™ w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24400FBL-70
Finish Line Titan™ w/ 27070 Phantom Plus Shade 9–12 ADF
24400FBL-80
Finish Line Titan™ w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
Black Titan™ Helmet with Silver Bezel (24401)
24401-602
Black Helmet w/ 27602 Impulse XVA Fixed Shade 10 ADF
24401-611
Black Helmet w/ 27611 Impulse® MagSense™ Shade 9–13 ADF
24701-60
Black Helmet w/ 27070-60 Phantom Lite XL Shade 9–12 ADF
24701-70
Black Helmet w/ 27070 Phantom Plus Shade 9–12 ADF
24701-80
Black Helmet w/ 27080 Phantom GTW Shade 9–12 ADF
®
®
®
®
®
®
PAGE 36
l
PAGE 37
1.800.323.7402
www.sellstrom.com
l
290 Series Features
• Molded from the World's
Toughest Thermoplastic Resin
• Extended crown provides greater
overhead protection
• Ideal for all welding applications
• Lightweight
• Super Kool™ coating available
• Uses standard size filter, cover,
impact & magnifier plates
• Made in USA
• CUL Certified to meet CAN/CSAZ94.3 Standards
• CE Certified
290 SERIES WELDING HELMETS
Black 4 1/2" x 5 1/4" Welding Helmets
29901
29901-45
Super Tuff™ Black Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front
4 1/2" x 5 1/4" Lift Front Adapter with 29901 Helmet
Helmet with Auto-Darkening Filters
29901-601 Super Tuff™ Black Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear with
27601 Impulse XVA X-Tended Viewing Area Fixed Shade 10 ADF
29901-611 Super Tuff™ Black Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear with
27611 Impulse® MagSense™ Variable Shade 9–13 ADF
29701-60
Super Tuff™ Black Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear with
27070-60 Phantom Lite XL Variable Shade 9–12 ADF
29701-70
Phantom Plus Variable Shade 9–12 ADF
29701-80
27080 Phantom GTW Variable Shade 9–12 ADF
®
®
®
®
®
Silver 4 1/2" x 5 1/4" Welding Helmets
29911
29911-45
29711
Auto-darkening filters provide
reliable protection against UV/IR
emissions, heat, sparks and spatters
in both the light and dark state.
When striking an arc, the filter
darkens automatically and provides
the following advantages: hands free
use, UV/IR protection for your
eyes and skin, faster and more
efficient welding, better quality
and less fatigue.
Super Tuff™, Super Kool™ Silver Coated Helmet w/ 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front
Super Kool™ Silver Coated Helmet w/ 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front with Phantom Plus
Shade 9–12 ADF
29911-601 Super Tuff™, Super Kool™ Silver Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and
Ratchet Headgear with 27601 Impulse XVA X-Tended Viewing Area® Fixed Shade 10 ADF
29911-611 Super Tuff™, Super Kool™ Silver Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and
Ratchet Headgear with 27611 Impulse® MagSense™ Variable Shade 9–13 ADF
29711-60
Super Tuff™, Super Kool™ Silver Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and
Ratchet Headgear with 27070-60 Phantom Lite XL Variable Shade 9–12 ADF
29711-80
Super Tuff™, Super Kool™ Silver Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and
Ratchet Headgear with 27080 Phantom GTW Variable Shade 9–12 ADF
®
®
Quality materials and design features
insure the best helmet available for any
job. All 290 Series welding helmets are
made from Super Tuff™ nylon which is
lighter than fiberglass and extremely
durable. Our Super Kool™ silver coated
models shed spatter without burning and
are 30% cooler than uncoated helmets.
The patented Sel-Snap™ lens retention
system provides easy loading of filter,
cover, and protective plates with no
gasket required. Extended crown
provides greater overhead protection.
Impulse Auto-Darkening Filter
®
• Solar powered with dual sensors
• Provides full protection against
UV/IR rays at all shades and in
off position
• Increases welding speed
and accuracy
• Fixed Shade 10
®
Blue 4 1/2" x 5 1/4" Welding Helmets
29941
29941-45
Super Tuff™ Blue Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front
29941-601 Super Tuff™ Blue Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27601 Impulse XVA X-Tended Viewing Area Fixed Shade 10 ADF
29941-611 Super Tuff™ Blue Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27611 Impulse® MagSense™ Variable Shade 9–13 ADF
29741-60
Super Tuff™ Blue Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27070-60 Phantom Lite XL Variable Shade 9–12 ADF
29741-70
with Phantom Plus Variable Shade 9–12 ADF
29741-80
with 27080 Phantom GTW Variable Shade 9–12 ADF
®
®
®
®
2" x 4 1/4" Welding Helmets
29301
29311
29411
29371
29501
29511
®
Black Helmet w/ 2" x 4 1/4" Sel-Snap™ Lift Front [Shown]
Super Kool™ Silver Coated Helmet w/ 2" x 4 1/4" Sel-Snap™ Lift Front
Super Kool™ Silver Coated Helmet w/ Silver Coated 2" x 4 1/4" Sel-Snap™ Lift Front
Red Coated Helmet with 2" x 4 1/4" Sel-Snap™ Lift Front
Black Helmet with 2" x 4 1/4" Sel-Snap™ Fixed Front
Super Kool™ Silver Coated Helmet w/ 2" x 4 1/4" Sel-Snap™ Fixed Front
Red 4 1/2" x 5 1/4" Welding Helmets
29971
29971-45
Super Tuff™ Red Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front
29971-601 Super Tuff™ Red Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27601 Impulse XVA X-Tended Viewing Area Fixed Shade 10 ADF
29971-611 Super Tuff™ Red Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27611 Impulse® MagSense™ Variable Shade 9–13 ADF
29771-60
Super Tuff™ Red Coated Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front and Ratchet Headgear
with 27070-60 Phantom Lite XL Variable Shade 9–12 ADF
29771-70
with Phantom Plus Variable Shade 9–12 ADF
29771-80
with 27080 Phantom GTW Variable Shade 9–12 ADF
®
29501-600 2" x 4 1/4" Fixed Front Black Helmet and Ratchet Headgear with 27600 Impulse
Fixed Shade 10 ADF
29511-600 2" x 4 1/4" Fixed Front Super Kool™ Silver Coated Helmet and Ratchet Headgear
with 27600 Impulse Fixed Shade 10 ADF
®
®
®
®
®
PAGE 38
l
®
1.800.323.7402
www.sellstrom.com
280 Series Features
• Traditional "Bucket Style" Design
• Molded from the World's
Toughest Thermoplastic Resin
overhead protection
• Lightweight
• Super Kool™ coating available
impact & magnifier plates
• Made in USA
CAN/CSA-Z94.3 Standards
Advantage™ Features
overhead protection
• Lightweight
impact and magnifier plates
• Made in USA
CAN/CSA-Z94.3 Standards
• Models 23501 and 23901
are CE Certified
Impulse Auto-Darkening Filter
• Provides full protection against
UV/IR rays at all shades and in
off position
and accuracy
• Fixed Shade 10
®
Impulse® XvA X-Tended
viewing Area®
• Edge-to-Edge Viewing Area:
3.2" x 5"
• Fixed Shade 10
280 SERIES WELDING HELMETS
Leather Welding Hood
• Ideal for tight,
•
•
•
•
confined spaces
Features patented
Sel-Snap™ lens retention
system, providing easy
loading of filter, cover
and protective plates
Ratchet headgear suspension
Durable heat resistant
material
Ergonomically designed
•
•
•
2" x 4 1/4" 280 Series Helmets
•
28301
28311
28501
28511
•
Super Slim™ Black 280 Helmet with 2" x 4 1/4" Lift Front
Super Kool™ Silver Coated 280 Helmet with 2" x 4 1/4" Lift Front
Super Slim™ Black 280 Helmet with 2" x 4 1/4" Sel-Snap™ Fixed Front
Super Kool™ Silver Coated 280 Helmet with 2" x 4 1/4" Sel-Snap™ Fixed Front
•
Ideal for tight, confined spaces
Features Super Kool™ coating that sheds
spatter without burning and is 30% cooler
than uncoated helmets
Features patented Sel-Snap™
lens retention system, providing
easy loading of filter, cover
and protective plates
Ratchet headgear suspension
allows user to adjust and
Made of durable, high
impact nylon
28901 Super Slim Black 280 Helmet with 4 1/2" x 5 1/4" Sel-Snap Fixed Front
28911 Super Kool™ Silver Coated 280 Helmet with 4 1/2" x 5 1/4" Sel-Snap™ Fixed Front
™
Lift Front Adapters
•
Series Welding Helmets
•
2" x 4 1/4" Lift Front Welding Helmet
•
•
2" x 4 1/4" Fixed Front Welding Helmet
•
23301
Grey Advantage™ Helmet with 2" x 4 1/4" Lift Front
23501
Grey Advantage Helmet with 2" x 4 1/4" Fixed Front
23501-24 Grey Advantage™ Helmet with 2" x 4 1/4" Fixed Front w/ Lift Front
Adapter & Ratchet Headgear
23501-600 Grey Advantage™ Helmet with 27600 Impulse Fixed Shade 10 ADF
™
®
4 1/2" x 5 1/4" Fixed Front Welding Helmet
23901
Grey Advantage Helmet with 4 1/2" x 5 1/4" Fixed Front
23901-45 Grey Advantage™ Helmet with 4 1/2" x 5 1/4" Lift Front Adapter
23901-601 Grey Advantage™ Helmet with 27601 Impulse XVA X-Tended Viewing
Area Fixed Shade 10 Auto-Darkening Filter
23901-611 Grey Advantage™ Helmet with 27611 Impulse® MagSense™ Magnetic
Sensing Variable Shade 9–13 Auto-Darkening Filter
®
®
•
Drop down ratchet suspension with a
"Quick-Release" ratchet adjusting knob
allows the user to modify the fit while wearing
Tightens the hard hat "on the go" with a
simple turn of the knob
Loosens the hard hat "on the go" with a
simple pull of the knob
Patented design
Extremely durable
Soft, comfortable sweatband included
•
•
•
•
•
•
27001
•
•
Uses standard size filter, impact
and cover plates
Positive internal spring plate
retention
Durable heat resistant material
Outstanding design features ultra
smooth action flip up window
Eliminates head bobbing while
providing convenience and safety
Made of durable high impact nylon
Protective
Welder's Bib
•
•
•
•
•
•
•
•
•
•
Attaches to the inside of most welding
helmets
Velcro dots provide a convenient and easy
way to attach, adjust and remove bib
Durable
Protects against sparks and spatter
Provides protection from infrared and UV rays
21100
•
•
•
•
27100
27101
Offers a simple
way to attach a
welding helmet to
a slotted hard hat
Dielectric
Easy to assemble
Available with any
Sellstrom Welding Helmet
•
•
•
Offers a simple method of
attaching welding helmets
to non-slotted hard hats
Easy to assemble
Provides a tight, secure fit
Available with any
Sellstrom Welding Helmet.
61970
61700
Universal Slot Adapter for Slotted Hard Hats
Zip-Klip™ Adapter for Non-Slotted Hard Hats
Iron Mask Hand Held Welding Shield
with a 2" x 4 1/4" Shade 10 Filter Plate
(Cover Plate Also Included)
Handhole Cap
2" x 4 1/4" Iron Mask Retainer
®
®
Sweatbands
Attach these durable,
absorbent sweatbands
onto the headband of your
welding helmet to absorb
excessive perspiration.
22450
22464
27000
Protective Leather Welder's Bib
Zip-Klip™ Adapter for Hard Hats
21301
Lightweight
Easy to hold in either hand
Uniquely designed for
maximum comfort and safety
Comes with shade 10 filter plate
Removable cap allows for
protection when used in right or left hand
Opening fits any size hand with glove
CUL Certified to meet CAN/CSA-Z94.3 Standards
25000-10
•
•
Leather Welding Hood with Ratchet
Headgear and 2" x 4 1⁄4" Sel-Snap™
Lift Front
21301-10 Leather Welding Hood with Ratchet
Headgear and 2" x 4 1⁄4" Sel-Snap™
Lift Front with Shade 10 Filter Plate
29411-08E Confined Space Welding Hood; Super
Kool™ Silver Coated Cut-Down Hood
with 2" x 4 1⁄4" Sel-Snap™ Lift Front
and two leather welding bibs
21300
4 1/2" x 5 1/4" Lift Front Adapter
•
•
•
“Quick-Release" Ratchet Headgear
Universal Slot Adapter
for Hard Hats
4 1/2" x 5 1/4" 280 Series Helmets
™
Patented
quick-Release
Ratchet Headgear
Confined Space Welding Hood
™
PAGE 40
SPECIALTY HELMETS
•
All 280 Series welding helmets are made
from Super Tuff™ nylon which is lighter
than fiberglass and extremely durable.
Our Super Kool™ silver coated helmets
are one of the world's toughest
thermoplastic resins, shedding spatter
without burning and are 30% cooler than
uncoated helmets. The patented Sel-Snap™
lens retention system provides easy loading of
filter, cover, and protective plates with no gasket
required. Also available with a variety of ADFs.
®
Iron Mask Hand Held
Welding Shield
450 Sweat-Band™ All Purpose, Rubber
Sweatband
Neoprene Headband for Pipe-Liner
Headgear
Standard Sweatband for Welding
Headgear
Headgears
•
•
•
Drop down ratchet suspensions allow the
user to modify the fit while wearing.
Tightens and loosens the hard hat "on the
go" with a simple turn of the knob.
Soft, comfortable sweatband included
27004
Plastic Pin Lock Headgear for all
Sellstrom Helmets
Retainers Parts & Accessories
27101
Sel-Snap™ 2" x 4 1/4" Retainer
27104
Sel-Snap™ 4 1/2" x 5 1/4" Retainer
27110
293 Series Replacement Kit for SelSnap™ Retainer
27300
Complete 2" x 4 1/4" "S" Lift Front
Retainer
27301
Inside Front Spring for "S" Lift Front
Retainer
27304
Back Spring for all helmets other than
"S" Lift Front
Ratchet Headgear Repair Kit for Welding
Helmets
22955
Ratchet Headgear Repair Kit for
Welding Helmets
Gaskets
19220
2" x 4 1/4" Neoprene Gasket
with cover plate
27303
2" x 4 1/4" Gasket
l
PAGE 41
1.800.323.7402
www.sellstrom.com
l
Phantom® GTW
Impulse® MAGSENSE™ Features
• Fail safe, absolutely no flickering
• Both optical & magnetic arc
detection systems, ensuring
that the filter will never open
(turn from dark to light) even
if the sensors are blocked
• Has the capability to detect
light & the magnetic waves that
occur during welding operations
• Great in production applications
where lighting issues, close
proximity to other welders,
smoke, or reflections can
confuse other filters
• Patented variable opto-magnetic
sensors can be adjusted from
zero to six feet in range
• CE Certified
™
The Sellstrom Impulse MAGSENSE patented auto-darkening filter
opto-magnetic detection system is the most fail-safe welding arc
recognizing system in the world. This unique product has both
optical and magnetic arc detection systems that ensures the
filter will never open (turn from dark to light) even if the sensors
are blocked. This is achieved through the magnetic field that is created when
an arc is struck. With a redundant magnetic arc detection system, the lens will
stay dark as long as there is an arc present. The opto-magnetic sensing system
is fully adjustable so that you can fine-tune the system to ambient conditions.
The Impulse® MAGSENSE™ is the perfect auto-darkening welding filter for
all welding processes including TIG and TIG pulsing.
®
™
®
Phantom auto-darkening filters provide reliable
protection against UV/IR emissions in both the dark
and light state. When striking an arc, the filter
automatically darkens and provides the following
advantages; hands-free use, UV/IR protection for
your eyes and skin, faster and more efficient welding, better quality
and less fatigue. Phantom offers the world's fastest switching speed
auto-darkening filter powered by batteries.
®
®
GTW
27080
®
Impulse MAGSENSE Auto-Darkening Filters
27611
27625
Impulse® MagSense™ Variable Shade 9–13
Impulse® Pro Variable Shade 9–13
18403
XL
Impulse® Features
•
•
•
•
•
•
•
•
•
Shade 9–12 Auto-Darkening Filter
®
®
PLUS
The Sellstrom Impulse XvA X-tended viewing
Area patented auto-darkening filter
features an EDGE-to-EDGE viewing area!
®
®
X-Tended view Fixed Shade 10 Auto-Darkening Filters
27601
27602
Patented ultra thin design
Solar powered with dual sensors
Water resistant
Fixed Shade 10
CE Certified
4 1/2" x 5 1/4" Impulse XVA X-Tended Viewing Area Fixed Shade 10
Auto-Darkening Filter with an EXTENDED VIEWING AREA of 4" x 4 1/2"
5 1/4" x 4 1/2" Impulse XVA X-Tended Viewing Area Fixed Shade 10
Auto-Darkening Filter with an EXTENDED VIEWING AREA of 3.2" x 5"
®
®
®
®
The Sellstrom Impulse patented auto-darkening
filter provides reliable protection against UV/IR
emissions in both the dark and light state. When
striking an arc, the filter automatically darkens
providing the following advantages; hands free
use, UV/IR protection to your eyes and skin,
faster, more efficient welding, better quality
and less fatigue.
®
Fixed Shade 10 Auto-Darkening Filter
27600
PAGE 42
Phantom GTW Variable Shade 9–12 Auto-Darkening Filter
with Pre-Programmed Grind, Torch and Weld Settings.
Supplied with 4 1/2" x 5 1/4" and 5 1/4" x 4 1/2" Horizontal
and Vertical Adapters
2.6" x 4 1/4" Inside Impact Plate
®
27070-60 Phantom Lite XL Variable Shade 9–12 Auto-Darkening Filter
with Adjustable Sensitivity and Delay Supplied with 4 1/2" x
5 1/4" and 5 1/4" x 4 1/2" Horizontal and Vertical Adapters
27008
Phantom Lite XL Magnifier Adapter
18403
2.6" x 4 1/4" Inside Impact Plate
Impulse® XvA X-Tended
viewing Area® Features
• Edge to Edge Viewing Area
• Everything below the gold
portion becomes a Fixed Shade
10 as soon as you strike an arc
• Provides user with continuous
protection AND vision
throughout the entire job
• Water resistant
• Fits most welding helmets
• Fixed Shade 10
• CE Certified
Impulse 2 1/2" x 4 1/4" Fixed Shade 10 Auto-Darkening Filter
®
27070
27071
27072
18402
Phantom Plus Variable Shade 9–12 Auto-Darkening Filter
with Adjustable Sensitivity and Delay Supplied with 4 1/2" x
5 1/4" and 5 1/4" x 4 1/2" Horizontal and Vertical Adapters
Replacement Battery Cover
Replacement Rear Safety Plate Spacer
2" x 4 1/4" Inside Impact Plate
®
Cover / Impact Plates
Long Life Clear Cr-39 Cover Plates
19002 2" x 4 1/4" Clear CR-39 Cover Plate (Individually Bagged, 1 Box/100)
19004 4 1/2" x 5 1/4" Clear CR-39 Cover Plate (Individually Bagged, 1 Box/50)
Economy Polycarbonate Cover Plates
19502 2" x 4 1/4" Clear Cover Plate (Bulk Packed, 1 Box/1000)
19504 4 1/2" x 5 1/4" Clear Cover Plate (Bulk Packed, 1 Box/500)
19512 2" x 4 1/4" Clear Cover Plate (Individually Enveloped, 1 Box/100)
19514 4 1/2" x 5 1/4" Clear Cover Plate (Individually Enveloped, 1 Box/100)
Glass Cover Plates
19602 2" x 4 1/4" Clear Glass Cover Plate (Bulk Packed, 1 Box/24)
19604 4 1/2" x 5 1/4" Clear Glass Cover Plate (Bulk Packed, 1 Box/30)
19606 2" x 4 1/4" Clear Glass Cover Plate (Bulk Packed, 1 Box/1000)
• Convenient pre-programmed
Grind, Torch and Weld settings
• Filter comes with both a
horizontal & vertical adapter
battery indicator
and accuracy
• Light Shade 3 & Variable
Shade 9–12
• Viewing Area: 2.36" x 3.84"
Phantom® LITE XL
battery indicator
horizontal and vertical adapter
and accuracy
• Light Shade 2.75
Variable 0.1 to 1.0s
Phantom® PLUS
and accuracy
horizontal and vertical adapter
battery indicator
• Light Shade 4 & Variable
Shade 9–12
Variable 0.1 to 1.0s
Cover & Impact Plate Features
• Cover plates protect plates
from pitting and scratching
• CR-39 cover plates provide
excellent scratch resistance
and longer life
• Sellstrom offers a wide
variety of models and
sizes to choose from
• Made of durable, heat
resistant material
Impact Standards
Gasket With Polycarbonate Cover Plate
19220 Neoprene Gasket with 2" x 4 1/4" Clear Cover Plate
Impact Plates Meet ANSI Z87.1+ High Impact Standards
18402 2" x 4 1/4" Clear Polycarbonate Impact Plate (Individually Bagged)
18403 2.6" x 4 1/4" Clear Polycarbonate Impact Plate (Individually Bagged)
l
PAGE 43
1.800.323.7402
www.sellstrom.com
l
Passive Welding Filter Plates
Filter Plates
• Polycarbonate is recognized for
its outstanding impact strength
and optical clarity
• Gold coating is ideal for intense
welding operations, adding
extra heat and light reflection
• Impact resistant
• Filter plates provide reliable
protection against UV/IR
emissions, heat, sparks
and spatter
• Sellstrom provides a wide
variety of material and
shades to choose from
• Durable, heat resistant material
• All meet ANSI Z87.1 Standards
• Heat Treated Glass Filter Plates
also are CUL Certified to meet
NOT SURE WHAT
SHADE YOU NEED?
SEE PAGE 45
FOR THE
ANSI Z49.1-2005
SHADE SELECTION
CHART
PAGE 44
POLYCARBONATE Filter Plates WITH CLEAR COVER PLATES
Meet ANSI Z87.1+ High Impact Standards
17109 2" x 4 1/4" Shade 9 Polycarbonate Plate with Clear Cover Plate
17209 4 1/2" x 5 1/4" Shade 9 Polycarbonate Plate with Clear Cover Plate
POLYCARBONATE Filter Plates
16604 2" x 4 1/4" Shade 4 IR/PC Polycarbonate Plate
16606B 2" x 4 1/4" Shade 6 COBALT BLUE IR/PC Polycarbonate Plate
16709 4 1/2" x 5 1/4" IR/PC Polycarbonate Plate, Shade 9
GOLD COATED POLYCARBONATE Filter Plates
18509 2" x 4 1/4" Gold Coated Polycarbonate Plate, Shade 9
18709 4 1/2" x 5 1/4" Gold Coated Polycarbonate Plate, Shade 9
HEAT TREATED GLASS Filter Plates
Meet ANSI Z87.1 Standards
16510 2" x 4 1/4" Heat Treated Glass Filter Plate, Shade 10
16309 4 1/2" x 5 1/4" Heat Treated Glass Filter Plate, Shade 9
GOLD COATED HEAT TREATED GLASS Filter Plates
Meet ANSI Z87.1 Standards
16809 2" x 4 1/4" Gold Coated Heat Treated Glass Filter Plate, Shade 9
16909 4 1/2" x 5 1/4" Gold Coated Heat Treated Glass Filter Plate, Shade 9
Magnifier Plates
18075
18100
18125
18150
18175
18200
18225
18250
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
0.75 Diopter Plate
1.00 Diopter Plate
1.25 Diopter Plate
1.50 Diopter Plate
1.75 Diopter Plate
2.00 Diopter Plate
2.25 Diopter Plate
2.50 Diopter Plate
According to OSHA...
18901
18902
18903
18904
18905
18906
18907
18908
18909
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
2" x 4 1/4"
The intensity of visible light
and radiant energy produced by
operations varies depending on
the task, the electrode size, and
the arc current. Workers involved
in welding, cutting, and brazing
operations must use appropriate
welding protection depending on
specific welding operations.
0.75 Diopter Plate
1.00 Diopter Plate
1.25 Diopter Plate
1.50 Diopter Plate
1.75 Diopter Plate
2.00 Diopter Plate
2.25 Diopter Plate
2.50 Diopter Plate
3.00 Diopter Plate
ANSI Z49.1-2005 Shade Selector Chart
Shade numbers are given as a guide only and may be varied to suit individual needs.
Process
Shielded Metal Arc
Welding (SMAW)
Electrode Size
in. (mm)
Arc Current
(Amperes)
Less than 3/32 (2.4)
3/32–5/32 (2.4–4.0)
5/32–1/4 (4.0–6.4)
More than 1/4 (6.4)
Less than 60
60–160
160–250
250–550
Less than 60
60–160
160–250
250–500
Less than 50
50150
10
Less than 500
500 - 1000
Less than 20
20 - 100
100 - 400
400 - 800
Less than 20
20 - 40
40 - 60
60 - 80
80 - 300
300 - 400
400 - 800
----------
Gas Metal Arc Welding
(GMAW) and Flux Cored
Arc Welding (FCAW)
Gas Tungsten Arc
Welding (GTAW)
Air Carbon Arc
Cutting (CAC-A)
Plasma Arc Welding (PAW)
150–500
(Light)
(Heavy)
Plasma Arc Cutting (PAC)
Torch Brazing (TB)
Torch Soldering (TS)
Carbon Arc Welding (CAW)
in.
Oxyfuel Gas Welding (OFW)
Oxygen Cutting (OC)
Plate Thickness
Minimum
Protective
Shade
7
8
10
11
7
10
10
10
8
8
10
11
6
8
10
11
4
5
6
8
8
9
10
----------
Suggested
Shade
Number
---10
12
1
---11
12
14
10
12
14
12
14
6 to 8
10
12
14
4
5
6
8
9
12
14
3 or 4
2
14
mm
Suggested Shade
Number
Light
Medium
Heavy
Under 1/8
1/8 to 1/2
Over 1/2
Under 3
3 to 13
Over 13
4 or 5
5 or 6
6 or 8
Light
Medium
Heavy
Under 1
1 to 6
Over 6
Under 25
25 to 150
Over 150
3 or 4
4 or 5
6 or 8
Only filter lenses with the appropriate
shade number will provide protection
against optical radiation. Filter lenses
must coincide to specific radiant
energy exposure. Welding protectors
are constructed of heat resistant
material such as vulcanized fiber or
fiberglass and fitted with a filtered
lens to protect worker's eyes from
burns caused by infrared or other
intense radiant energy. These devices
protect the eyes and face from flying
sparks, metal spatter, and slag chips
produced during welding, brazing,
soldering, and cutting.
Welding helmets are secondary
protectors intended to shield the eyes
and face from optical radiation, heat,
and impact. Use welding helmets in
addition to primary protection such
as safety spectacles or goggles to
provide adequate protection.
Metric Conversion Chart
2" x 4 1/4" (5.08 cm x 10.80 cm)
4 1/2" x 5 1/4" (11.43 cm x 13.34 cm)
2.6" x 4 1/4" (6.60 cm x 10.80 cm)
l
PAGE 45
1.800.323.7402
www.sellstrom.com
l
Odyssey® II Shade 5 IR Cutting
Goggle
• Durable Shade 5 IR Lens
• Ultra comfortable, soft goggle
body, snug seal
• Indirect vents on top & bottom
protect against liquids & dust while
• Panoramic vision
• Fits over prescription eyewear
• Adjustable fire retardant wide band
WELDING GOGGLES
Replacement Parts Available!
Welding Goggles
Odyssey® II SHADE 5 CUTTING GOGGLE
Shade 5 IR Lens, Panoramic Vision, Wide Fire Retardant Cloth Strap.
80211 Black Indirect Vent Goggle Body / Shade 5 IR Lens. Packaged in a Point of Sale Clam
80210 Black Indirect Vent Goggle Body / Shade 5 IR Lens. Packaged in a Polybag
80243 Replacement Shade 5 IR Lens
Plate Goggle
• Durable Shade 4 or 5 IR Lens
• Flexible, soft PVC goggle body
with a snug seal
Odyssey® II Cutting Goggle
Eye Cup Goggle
Lift Front Plate Goggle
• Clear plastic lens for viewing
protection when lift front is in
the lifted hinged position
• Durable Shade 4, 5, 6, or Cobalt
Blue IR Lens
with a snug seal
LIFT FRONT PLATE GOGGLE
85540 Green PVC Indirect Vent Lift Front Plate Goggle Body / 2" x4 1/4" Shade 4 IR Lens
85560B Green PVC Indirect Vent Lift Front Plate Goggle Body / 2" x4 1/4" Shade 6 Cobalt Blue Lens
LENS COVER GOGGLE
85240 Green PVC Indirect Vent Lens Cover Goggle Body / 50mm Shade 4 IR Lens
Lens Cover Goggle
• Durable Shade 4, 5 or 6 IR Lens
with a snug seal
Plate Goggle
Lift Front Cover Goggle
• Clear plastic lens for viewing
protection when lift front is in
the lifted hinged position
• Durable Shade 4, 5 or 6 IR Lens
with a snug seal
PAGE 46
LIFT FRONT COVER GOGGLE
85340 Green PVC Indirect Vent Lift Front Cover Goggle Body / 50mm Shade 4 IR Lens
EYE CUP GOGGLE
85110 Green PVC Eye Cup Goggle Body / 50mm Clear Lens
85140 Green PVC Eye Cup Goggle Body / 50mm Shade 4 IR Lens
All Product listed is CUL Certified to meet CAN/CSA Z94.3 Standards and meets ANSI Z87.1+
High Impact Standards
Eye Cup Goggle
• Ideal for confined spaces
• Durable Clear, Shade 4, 5 or
6 IR Lens
with a snug seal
PLATE GOGGLE
85440 Green PVC Indirect Vent Plate Goggle Body / 2" x4 1/4" Shade 4 IR Lens
Lens Cover Goggle
Lift Front Cover Goggle
design available in Shade 6
Cobalt Blue Lens!
l
PAGE 47
1.800.323.7402
www.sellstrom.com
l
WELDING CURTAINS
Meets ANSI/FM 4950 Standard
FM Approvals developed the first
performance-based standard for “Welding
Curtains, Blankets and Pads" — the FM
4950 Standard. Early in 2007, the FM 4950
test procedures were adopted by the
widely recognized ANSI (American
National Standards Institute) as ANSI/FM
4950. The Standard rates fabrics based on
severity of use. The rating system makes it
easy for safety professionals to determine
which of the three levels of fire protection
— welding curtains, welding blankets or
welding pads — is needed for a specific
hot work operation. Sellstrom offers 17
fabrics that have undergone the rigorous
testing and approval process conducted by
FM Approvals, now meeting the new
ANSI/FM 4950 Standard.
HOT WORK FABRICS
FM APPROvED FABRICS RATING KEY
To make it easier to choose the right FM
Approved fabric for a specific hot work
operation, Sellstrom has rated the fabrics
as GOOD, BETTER and BEST. The ratings
take into account a number of factors
such as durability, weatherization and
thermal performance. Rating
determination is based on distance from
hot work, amount of mechanical abuse,
level of exposure to sparks and slag,
location of the fabric, moisture concerns,
elements such as wind and UV if
application is outdoors, how much of the
fabric will be exposed, and is workspace
open or confined.
GOOD Fabrics rated as “GOOD" fall under
the FM Approved category of “Welding
Curtains" — intended for use in vertical
applications with light to moderate
exposures to sparks and heat.
BETTER Fabrics rated as “BETTER" fall
under the FM Approved category of
“Welding Curtains" — intended for use in
VERTICAL applications with light to
moderate exposures to sparks and heat.
BEST Fabrics rated as "BEST" fall under
the FM Approved categories of “Welding
Pads" and “Welding Blankets". Welding
Blankets are intended for HORIZONTAL
applications with light to moderate
exposures to sparks, heat and molten
metal slag. Welding Pads are intended for
use in HORIZONTAL applications with
severe exposures to molten substances or
heavy horizontal welding.
PAGE 48
Intended for use in VERTICAL applications with LIGHT to MODERATE exposures
to sparks and heat, such as that resulting from chipping, grinding, heat-treating,
sand blasting and light horizontal welding. They are designed to prevent sparks from escaping the designated work area.
GOOD 96% Silica FM Fabric - 12.5 oz. Thickness:0.028'', Temp:1800˚F/ 1000˚C
97600-6 Custom Roll & Fabrication FM Approved 12.5oz. Amorphous Silica Welding Curtain Fabric
GOOD 96% Silica with Harness Crow Foot Weave FM Fabric - 18 oz. Thickness:0.030'', Temp:1800˚F/ 1000˚C
97600-7 Custom Roll & Fabrication FM Approved 18oz. Amorphous Silica with Harness Crow Foot Weave Welding Curtain Fabric
FM Fabrics for Welding Applications
Six different types of high temperature fabrics
for welding safety use, ranging in temperature
resistance from 225°F (107°C) to 3000°F
(1650°C) are offered. They are designed for a
wide range of applications and levels of heat
exposure, and are available with a variety of
fibers and coatings.
• 100% fiberglass
• Silicone-coated 100% fiberglass
• Vermiculite-coated 100% fiberglass
• Carbon-fiberglass composite
• Neoprene-coated 100% fiberglass
• Essentially pure amorphous silica
FM Approved Welding Curtains
CAUTION
All fabrics are potentially subject to burn-through. To be
effective, fabrics used for welding protection purposes
must be utilized as part of a fire prevention system. They
should always be employed in accordance with the
procedures set forth in NFPA 51B Hot Work Standard or
other applicable standards.
GOOD 96% Silica with Harness Stain Weave FM Fabric - 18 oz. Thickness:0.026'', Temp:1800˚F/ 1000˚C
97600-8 Custom Roll & Fabrication FM Approved 18oz. Amorphous Silica with Harness Stain Weave Welding Curtain Fabric
FM Approved Welding Pads
Intended for use in HORIZONTAL applications with SEVERE exposures, such as that
resulting from molten substances or heavy horizontal welding. Designed to prevent
the ignition of combustibles that are located adjacent to the underside of the pad.
BEST 96% Amorphous Silica FM Fabric - 36oz. Thickness: 0.054'', Temp:1800˚F/1000˚C
97604-1
6' x 6' FM Approved 36 oz. Amorphous Silica Welding Pad
97605-1
6' x 8' FM Approved 36 oz. Amorphous Silica Welding Pad
97600-1
Custom Roll & Fabrication FM Approved 36 oz. Amorphous Silica Welding
Pad Fabric
BEST 96% Amorphous Silica FM Fabric - 40oz. Thickness:0.090'', Temp:1800˚F/ 1000˚C
97600-2
Custom Roll & Fabrication FM Approved 40 oz. Amorphous Silica Welding
Pad Fabric
BEST 100% Carbon-Fiberglass Composite FM Fabric - 20oz. Thickness: 0.150'',
Temp:500˚F/260˚C
97604-3
6' x 6' FM Approved 20 oz. Carbon-Fiberglass Composite Welding Pad
97605-3
6' x 8' FM Approved 20 oz. Carbon-Fiberglass Composite Welding Pad
97600-3
Custom Roll & Fabrication FM Approved 20 oz. Carbon-Fiberglass Composite
Welding Pad Fabric
BEST Vermiculite Treated Fiberglass FM Fabric - 75oz. Thickness: 0.115'', Temp:500˚F/ 260˚C
97600-4
Custom Roll & Fabrication FM Approved 75 oz. Vermiculite Treated Fiberglass
Welding Pad Fabric
FM Approved Welding Blankets
Intended for use in HORIZONTAL applications with LIGHT to MODERATE exposures
to sparks, heat and molten metal slag. They are designed to protect machinery and
prevent ignition of combustibles located in the designated work area.
BEST 96% Silica (Silicone on One Side) FM Fabric - 29oz. Thickness: 0.047'',
Temp:500˚F/260˚C
97604-5
6' x 6' FM Approved 29 oz. Amorphous Silica (Coated on one side with Silicone)
Welding Blanket
97605-5
6' x 8' FM Approved 29 oz. Amorphous Silica (Coated on one side with Silicone)
Welding Blanket
97600-5
Custom Roll & Fabrication FM Approved 29 oz. Amorphous Silica (Coated on
one side with Silicone) Welding Blanket Fabric
BETTER 96% Silica FM Fabric - 24oz. Thickness: 0.040'', Temp:1800˚F/ 1000˚C
97604-9 6' x 6' FM Approved 24oz. Amorphous Silica Welding Curtain
97605-9 6' x 8' FM Approved 24oz. Amorphous Silica Welding Curtain
97600-9 Custom Roll & Fabrication FM Approved 24oz. Amorphous Silica Welding Curtain Fabric
GOOD 100% Fiberglass Black FM Fabric - 13oz. Thickness: 0.016'', Temp:1000˚F/ 540˚C
97600-10 Custom Roll & Fabrication FM Approved 13oz. Black Fiberglass Welding Curtain Fabric
GOOD 100% Fiberglass FM Fabric - 18oz. Thickness: 0.036'', Temp:1000˚F/ 540˚C
97604-11 6' x 6' FM Approved 18oz. Fiberglass Welding Curtain
97600-11 Custom Roll & Fabrication FM Approved 18oz. Fiberglass Welding Curtain Fabric
GOOD 100% Fiberglass FM Fabric - 24oz. Thickness: 0.055'', Temp:1000˚F/ 540˚C
97600-12 Custom Roll & Fabrication FM Approved 18oz. Fiberglass Welding Curtain Fabric
GOOD 100% Fiberglass Coated w/ Silicone FM Fabric - 14oz. Thickness: 0.013'', Temp:500˚F/ 260˚C
97604-13 6' x 6' FM Approved 14oz. Fiberglass (Coated with Silicone) Welding Curtain
97600-13 Custom Roll & Fabrication FM Approved 14oz. Fiberglass (Coated with Silicone) Welding Curtain Fabric
BETTER 100% Fiberglass Coated w/ Silicone FM Fabric - 17oz. Thickness: 0.016'', Temp:500˚F/ 260˚C
BETTER Fiberglass Coated with Silicone FM Fabric - 32oz. Thickness: 0.035'', Temp:500˚F/ 260˚C
BETTER Fiberglass Coated On One Side with Neoprene FM Fabric - 21oz. Thickness: 0.030'', Temp:225˚F/ 107˚C
97604-16 6' x 6' FM Approved 21oz. Fiberglass (Coated on one side with Neoprene) Welding Curtain
97600-16 Custom Roll & Fabrication FM Approved 21oz. Fiberglass (Coated on one side with Neoprene) Welding Curtain Fabric
BETTER Fiberglass Coated On One Side with Neoprene FM Fabric - 26oz. Thickness: 0.055'', Temp:225˚F/ 107˚C
97600-17 Custom Roll & Fabrication FM Approved 26oz. Fiberglass (Coated on one side with Neoprene) Welding Curtain Fabric
l
PAGE 49
1.800.323.7402
www.sellstrom.com
l
We offer all the necessary
materials to design and
build your protective
welding environment.
• All high temperature fabrics,
excluding the SoftShield™, are
hemmed on all four sides with
Kevlar® thread with brass
grommets on corners and
36" (91.44cm) center
• Custom sizes available:
Minimum size - 18 sq. ft.
• Actual size may vary 3"
in height
• Curtains are available in the
high temperature fabrics as
custom orders
100% Fiberglass High Temp Fabric
100% woven texturized fiberglass
designed for maximum flexibility
using low irritating yarns. Strong,
safe and chemical resistant.
Maintains physical integrity
and protects for excursion
temperatures to 1000˚F (540˚C).
Ideal for pipe lagging and
welding protection.
Aluminized Fiberglass
Ideal for reflective heat protection.
Maintains physical integrity and
protects for excursion
100% woven texturized fiberglass
with 0.001" (0.003cm) aluminum
foil bonded to fabric.
SoftShield Carbon Fiber Felt
™
Extremely lightweight and flexible.
Maintains physical integrity and
protects for excursion
Resistant to sparks and spatter
and is scratch-resistant to protect
finishes or equipment.
REMINDER
When ordering curtains,
add 10% to width of
curtain to allow for
proper draping.
PAGE 50
HIGH TEMPERATURE FABRICS
HIGH TEMPERATURE FABRICS
Silica High Temp Fabric
The optimal choice for welding
applications. Maintains physical
integrity and protects for
excursion temperatures to 3000˚F
(1650˚C). This is 96% amorphous
silica material that is both pliable
and durable. Low soluble
chlorides and halogens facilitates
use in both nuclear and fossil fuel
power plants. Water repellent.
Weld-Flex High Temp Fabric
Heat resistant fabrics and high-temperature fire blankets for all severe heat
environments. Typical Applications: High Heat Reflection, Molten Metal Splash,
Welding Shields, Freeze Protection, Steam Tracing Insulation, Fire Blankets, Stress
Relieving, Lagging, Removable Flange and Valve Covers, Hose and Cable
Protection, Expansion Joints, Insulation of Metal Tubing, Pipe Wrap, Oven Door
Seals, Tadpole Gasketing and Tadpole Tape Core.
100% Fiberglass
100% Fiberglass High Temp Fabric - 18oz.
White, Continuous Temp. 1000˚F/ 540˚C
97404-3
6' x 6' (18 oz.) White Fiberglass Fabric
97405-3
97406-3
97400-3-1
Custom Size (18 oz.) White Fiberglass Fabric
100% Fiberglass High Temp Fabric - 32oz.
97404-4
97405-4
97406-4
97400-4-1
Custom Size (32 oz.) White Fiberglass Fabric
Aluminized Fiberglass
Aluminized Fiberglass High Temp Fabric - 18oz.
Silver/White, Continuous Temp. 650˚F/ 343˚C
97405-5
6' x 9' (18 oz.) Aluminized Fiberglass Fabric
97406-5
6' x 12' (18 oz.) Aluminized Fiberglass Fabric
97400-8-1
Custom Size (18 oz.) Aluminized Fiberglass Fabric
Silica High Temp Fabric
96% Amorphous Silica High Temp Fabric - 18oz.
Off White/Tan, Continuous Temp. 3000˚F/ 1650˚C
97404-8
6' x 6' (18 oz.) Off White Silica Fabric
97405-8
97406-8
97400-8-1
Custom Size (18 oz.) Off White Silica Fabric
97400-8-2
36" W x 50 yard Roll (18 oz.) Off White Silica Fabric
96% Amorphous Silica High Temp Fabric - 36oz.
Off White/Tan, Continuous Temp. 3000˚F/ 1650˚C
97404-9
97400-9-1
Custom Size (36 oz.) Off White Silica Fabric
97400-9-2
36" W x 50 yard Roll (36 oz.) Off White Silica Fabric
Exceptional abrasion resistance
and retention of strength. This
fabric stands up to the demands
of a harsh environment.
Maintains physical integrity
and protects for excursion
Weld-Flex® Registered Trademark
of R.M. Engineered Products, Inc.
Duck High Temp Fabric
Resistant to fire, water, and
mildew. Meets California Fire
Marshall Requirements. A great
choice for rugged welding
applications. Maintains physical
integrity and protects for
excursion temperatures to
1000˚F (540˚C).
Weld-Flex High Temp Fabric
Weld-Flex High Temp Fabric - 23oz.
Black, Continuous Temp. 650˚F/ 343˚C
97404-10
6' x 6' (23 oz.) Black Weld-Flex Fabric
97405-10
6' x 9' (23 oz.) Black Weld-Flex Fabric
®
®
Duck High Temp Fabric
SoftShield™ Carbon Fiber Felt
SoftShield™ High Temp Fabric - 17oz.
97404-12
6' x 6' (17 oz.) SoftShield™ Carbon Fiber Felt Fabric
97408–12
6' x 8' (17 oz.) SoftShield™ Carbon Fiber Felt Fabric
97400-12-1
Custom Size (17 oz) SoftShield™ Carbon Fiber Felt Fabric
Duck High Temp Fabric - 16oz.
Dark Green, Continuous Temp. 1000˚F/ 540˚C
97404-7
6' x 6' (16 oz.) Green Duck Fabric
97405-7
97406-7
97400-7-1
Custom Size (16 oz.) Green Duck Fabric
l
PAGE 51
1.800.323.7402
www.sellstrom.com
l
We offer all the necessary
materials to design & build
your protective welding
environment.
Cepro® Curtain Features
Cepro® curtains give the best
possible protection for
bystanders in welding areas and
meet EN-1958, the highest
standard in this field. Cepro®
welding curtains are selfextinguishing (according to
DIN53438 part 2) and therefore
withstand welding sparks. They
are, however, not suitable as a
welding blanket and do not
withstand open fire and intense
heat. Welding curtains offer
visual protection against
dangerous radiation but are not
suitable for supervising welding
works or as a substitute for
welding helmets.
• 5 snap fasteners on each side
for interconnecting. This
provides a versatile, quick,
economical solution, allowing
as many curtains to be added
to as needed for your
particular workspace.
• Both options are transparent
which allows a good
overview of the work area;
this creates safety and
prevents welders from
feeling isolated
• Can be used in nearly all
work situations
• Fit with sealed eyelets at the
top (each 1') , eyelets on
both sides and bottom (each
2'), and 5 snap fasteners on
each side for interconnecting,
with a material thickness
of 14 mil
• A set of 7 steel rings is also
provided for hanging the
curtain on a 1" tube
• Packaged in a clear poly bag
• Available in orange or
green vinyl
SERIES
WELDING CURTAINS
• Frame Size: H. 6' x W. 6.5'
• The welding frame is produced
from 1" x 0.04" zinc plated
pipe and interconnected with
strong bolt fixings
• Very lightweight
(approx. 15 lbs. w/curtain)
• Easily assembled without tools
• Comes with an approx. 6' high
transparent welding curtain which
allows a good overview of the work
area; this creates safety and prevents
welders from feeling isolated
• Available in orange or green vinyl
• Comply with European
standard EN-1598
Cepro® Rhino Features
Cepro Gazelle Kits
Welding Curtains with
Lightweight Frame
Cepro Rhino Kits
Welding Curtains with
Heavy-Duty Frame
Frame and Curtain Not Sold Separately
Frame Only Also Available
®
Welding curtains are designed for
use in workplaces where bystanders
must be protected against the
hazardous radiation emitted during
welding work. They provide
protection against
dangerous Blue Light
and Ultra Violet (UV)
rays. In case
of prolonged
exposure, these
rays can cause
actinic conjunctivitis
and even cataracts.
The curtains also
protect the welder
against the reflection
of the welding light.
97240-1
®
6' x 6' Transparent Orange
14 mil. Vinyl Cepro Welding
Curtain with Lightweight
Gazelle 6' x 6.5' Frame
6' x 6' Transparent Green
Curtain with Lightweight
Gazelle 6' x 6.5' Frame
97250
®
97240-3
97250-1
Heavy-Duty 6.25' x 6.5'
Rhino Frame—
(Note: 2–6x6 curtains required)
6' x 6' Transparent Orange
Curtain with Heavy-Duty
6.25' x 6.5' Rhino Frame
6' x 6' Transparent Green
Curtain with Heavy-Duty
6.25' x 6.5' Rhino Frame
®
®
97240-3
®
TENT
Cepro Outdoor Tent
®
97260
Cepro Welding Curtains with Snap System
®
97709-1
97709-3
97710-1
97710-3
PAGE 52
SERIES
WELDING CURTAIN KITS
Cepro® Gazelle Features
6' x 4' Transparent Orange 14 mil. Vinyl Cepro Welding Curtain with Snap Fasteners
6' x 4' Transparent Green 14 mil. Vinyl Cepro Welding Curtain with Snap Fasteners
6' x 6' Transparent Orange 14 mil. Vinyl Cepro Welding Curtain with Snap Fasteners
6' x 6' Transparent Green 14 mil. Vinyl Cepro Welding Curtain with Snap Fasteners
®
®
White Heavy-Duty Vinyl Tent
Dimensions: 6.25' Wide x 6.5'
Deep x 6.5' High at the Sides
and 7.25' in the Middle
• Frame Size: H. 6.5' x W. 6.25'
• The welding frame is produced
from round pipe (1.2" x 0.08")
and rectangular pipe (1.2" x 1.5"
x 0.08") and is powder-coated
color gray RAL 7035
• Supplied with four (2" diameter)
rubber swivel casters, two of
them with brakes
• Easily assembled
• Comes with an approx. 6' high
transparent welding curtain
which allows a good overview of
the work area; this creates safety
and prevents welders from
feeling isolated
• Available in orange or green vinyl
• Comply with European standard
EN-1598
Cepro® Tent Features
• Protects workers, work space
and equipment against all kinds
of weather conditions
• The cover is made from 17 oz.
white PVC fabric and is selfextinguishing according to the
M2 standard
• The tent can be closed at both
the front and the back. The tent
is fitted with 8" wide ground
flaps all around.
• Frame is made from strong 1"
diameter galvanized tubes,
providing a long life span
• The height in the middle of the tent
is over 7 feet high, allowing ample
room to move around and work
®
®
l
PAGE 53
1.800.323.7402
www.sellstrom.com
l
Supervisor Series Welding
Curtains and Frame Features
• Transparent Vinyl Colors Available —
Orange, Yellow, Green, and Blue
• Solid Vinyl Colors Available —
Yellow, Blue, Red, and White
• Also available in Duck material for
maximum glare reduction
• Vinyl and Duck material resist
tearing, cracking or shattering
• Resistant to fire, water and mildew
• May be used around arc, plasma,
gas or other high amperage
welding equipment
• Brass grommets on corners add
extra strength for long life
• Welding frame comes standard
with anti-skid legs. Heavy duty
swivel casters are also available
• All curtains are supplied
with heavy-duty self locking
metal hooks
• All curtains feature durable nylon
thread and double stitching on all
four sides insuring a secure hem
• Frame constructed of 7/8" galvanized
steel tubular pipe for stability and
long life
• Custom curtain sizes available
• Curtains meet CPA 1-84 and
California Fire Marshall's
requirements for flame resistance
• Warning: Curtains are not to be used
as a replacement for a welding
helmets or filter plates, but as
protection for casual observation
SUPERvISOR SERIES
CURTAINS AND FRAMES
How to Order Supervisor Series
Step 1 Choose the Style
o Welding Screen Complete with all the hardware needed to set-up
immediately. Screens are partially assembled for easy installation.
o Welding Curtain Curtain only to be used with existing structure.
Supplied with heavy-duty hanging hooks that fit up to 11/2" (3.81 CM)
O.D. pipe.
Step 2 Select the Size and Material Needed
o Refer to “Material Features" guide below for material information and
“Selecting and Ordering" chart to right for selecting the appropriate
item number
Step 3 Ordering
o Sellstrom will review each order to ensure all materials are included for
immediate set-up.
Sellstrom Supervisor Series Welding Curtains are specially designed to allow a
safer work environment for welding supervisor, co-worker and passerby. Made
using only top grade heavy duty vinyl or duck that absorbs dangerous
ultraviolet radiation from high amperage welding arcs while allowing excellent
observation of activities. These durable curtains can be used throughout the
workplace. Sets up in minutes and comes complete with hardware.
The heavy-duty vinyl used in Sellstrom curtains are composed of a top grade
vinyl film processed with a color dye, flame retardant chemical and ultraviolet
absorber. The dye absorbs and filters more of the blue light glare associated
with welding arc. The surface of the material acts as a reflector causing the
arc to appear larger and less bright reducing the glare to the eyes.
The Supervisor Series will create a safer environment and greater productivity
of both the welder and co-workers.
PORTABLE WELDING SCREEN
Portable welding screen specially designed to allow a safer
work environment for welding supervisor, co-worker and
passerby. Made of top grade heavy duty vinyl that unrolls
and sets up in seconds. Easy to move, store and carry.
Portable Welding Screens
97220
97221
97222
PAGE 54
SUPERvISOR SERIES CURTAINS AND
FRAME ORDERING INFORMATION
4' x 4' Portable Heavy-Duty Yellow Vinyl Welding Screen
o Curtains: Add 10% to width to allow for proper draping.
o Custom Orders: Minimum size of 4' x 5' (1.22 m X 1.52 m).
Material Features
Material & Color Choices
o
Duck - For total glare reduction
o
All Solid Vinyl Colors - For total glare reduction
o
Transparent Green - Offers best protection with visibility
o
Transparent Yellow - Offers best visibility
o
Transparent Orange - Offers better visibility
o
Transparent Blue - Offers good visibility
Material Notes
o
Duck Material Curtains - Are resistant to fire,
water, mildew, and meet the California Fire
Marshall requirements
o
Wind Control System - All curtains have brass
grommets on all four sides for tie down to framing
o
Quality Construction - All curtains resist tearing,
cracking or shattering for long life
o
Flame Retardant Material - All curtains contain the
molten metal within the welding areas
o
Equipment Safe - All curtains may be used around arc,
plasma, gas or other high amperage welding equipment
1.800.323.7402
Select the Item Number for the size of curtain, followed by the
Item Number for the Material
Beginning of Item #
Available Sizes ( H x W)
97300
97301
97302
97303
97304
97305
97306
97307
97308
97309
97310
97311
97312
97313
97320
97230
Custom Size
4' x 5' (1.22 m x 1.52 m)
4' x 6' (1.22 m x 1.83 m)
4' x 8' (1.22 m x 2.44 m)
4' x 10' (1.22 m x 3.05 m)
5' x 5' (1.52 m x 1.52 m)
5' x 6' (1.52 m x 1.83 m)
5' x 8' (1.52 m x 2.44 m)
5' x 10' (1.52 m x 3.05 m)
6' x 4' (1.83 m x 1.22 m)
6' x 6' (1.83 m x 1.83 m)
6' x 8' (1.83 m x 2.44 m)
6' x 10' (1.83 m x 3.05 m)
6' x 12' (1.83 m x 3.66 m)
60" x 25 yard Roll (12" grommets 1 side)
End of Item #
Material Choice
-1
-2
-3
-4
-7
-22
-44
-55
-66
Welding Frame & Accessories
97390
97391
97392
97393
l
Selecting and Ordering
Adjustable Welding Screen Frame (Can be made into a 5' x 5', 5' x 6',
6' x 4' and 6' x 6' Frame Size)
Heavy-Duty Swivel Casters, Set of 4
Replacement Brass Grommets, each
Additional Heavy-Duty Metal Hanging Hooks
Additional Frame to Frame Fasteners
14 mil. Orange Transparent Vinyl
14 mil. Yellow Transparent Vinyl
14 mil. Green Transparent Vinyl
14 mil. Blue Transparent Vinyl
Green Duck Material
14 oz. Yellow Solid Vinyl
14 oz. Blue Solid Vinyl
14 oz. Red Solid Vinyl
14 oz. White Solid Vinyl
Example:
6' H x 8' W Transparent Orange
Welding Curtain in 14 mil
would be designated as:
97311-1
PAGE 55
www.sellstrom.com
l
Fire Blanket Features
• Strong, safe and
chemical resistant
• For use on small and
contained fires
• Fiberglass blankets are
hemmed on all four sides with
Kevlar® thread and have brass
grommets on corners and 36"
center. Also machine washable.
• Red vinyl bag/pouch protects
fire blankets from exposure to
harsh UV rays, chemicals,
moisture, dust, salt air, insects,
and temperature extremes
Welding Blanket Features
• Designed for hot work operation
• Intended for use in horizontal
applications with light to
moderate exposures such as
chipping, grinding, heat
treating, sand blasting, and
light horizontal welding
• Strong, safe & chemical resistant
• Hemmed on all four sides
with Kevlar® thread and have
brass grommets on corners
and 36" center
• Machine washable
• Fiberglass blanket has a 1000°F
continuous service temperature
• Blue vinyl bag protects welding
blanket from exposure to harsh
UV rays, chemicals, moisture,
dust, salt air, insects, and
temperature extremes
EMERGENCY FIRE AND
WELDING BLANKETS
Emergency/Extrication Fire Blankets
5' x 6' heat resistant blankets are used to either
cover the fire, cutting off the oxygen supply; or to
wrap around a person whose clothes are on fire.
Traditional Fiberglass Features
• 100% woven texturized
fiberglass designed for
maximum flexibility using
low irritating yarns
• Strong, safe and
chemical resistant
• Maintains physical integrity
• Protects for excursion
temperatures to 1000˚F (540˚C)
SoftShield™ Carbon Felt Features
• Extremely lightweight & flexible
• Maintains physical integrity
• Protects for excursion
temperatures to 3000˚F (1650˚C)
• Resistant to sparks and spatter
and is scratch-resistant to
protect finishes or equipment
Emergency Fire Blankets
With 100% Fiberglass High Temp Fabric - 18oz.
97450 5' x 6' White (18 oz.) Fiberglass Blanket in Red Vinyl Pouch
(Two heavy-duty grommets on top of pouch for hanging)
97452 5' x 6' White (18 oz.) Fiberglass Blanket in Small Red
Vinyl Duffel Bag with Handles
97453 5' x 6' Black (17 oz.) SoftShield™ Carbon Fiber Felt
Blanket in Red Vinyl Bag with Handles
Welding Blanket
97455 5' x 6' White (18 oz.) Fiberglass Blanket in Blue Vinyl Bag
with Handles
PAGE 56
• Cabinets can be easily wall
mounted or placed on a counter
for quick and easy access
• Easy to identify bright red color
with large white lettering
High Heat Fabric Options...
High Temperature Fiberglass Welding Blankets
5' x 6' heat resistant blankets are used to protect
workers, property and equipment from sparks and
spatter associated with welding, cutting, grinding,
and other specialized manufacturing processes.
Custom Imprinting Available
• Minimum Order of 24 units
EMERGENCY FIRE CABINETS
Emergency Fire Blanket Cabinet
Emergency Fire Blanket Cabinets
97457 5' x 6' White (18 oz.) Fiberglass Blanket in Red Steel
Cabinet. Dims: 15" H x 15" W x 2" D
97467 Replacement 5' x 6' White (18 oz.) Fiberglass Blanket
in unsealed clear bag
97456 5' x 6' Black (17 oz.) SoftShield™ Carbon Fiber
Felt Blanket in Red Steel Cabinet.
Dims: 16" H x 15" W x 5.5" D
97466 Replacement 5' x 6' Black (17 oz.) SoftShield™ Carbon
Fiber Felt Blanket in unsealed clear bag
l
PAGE 57
1.800.323.7402
www.sellstrom.com
l
ANSI Standard Z358.1
The OSHA regulations listed in 29
CFR determine where and when
emergency eyewash and shower
equipment must be installed.
These regulations do not, however,
specify design characteristics or
minimum performance levels for
this equipment. The American
National Standards Institute has
adopted ANSI Standard Z358.1
"Emergency Eye Wash and
Shower Equipment" to address
these issues. This standard serves
as a guide for the proper design,
performance and installation of
emergency equipment to comply
with OSHA regulations.
Rapid-Clear® Features
• Date coded for
easy inspection
• Tamper-evident seal
ensures a sterile solution
with an easy to open
twist off cap
• High visibility green
plastic backboard
that can be hung or
placed on a counter
• Fast, simple and effective
EMERGENCY EYEWASH & SHOWER OvERvIEW
15 GALLON EYEWASH/DRENCH HOSE UNIT
A self-contained eyewash and/or drench hose unit is ideal where a continuous
supply of potable water is not available. This unit may be used in low traffic areas,
low hazard areas or where installation of plumbed equipment is not cost effective.
15 Gallon Eye Wash/Drench Hose Portable Unit
Complete Unit
90315
15 Gallon Eyewash/Drench Hose Portable Unit
Available Options
90316
Two wheel hand cart for transporting and storing unit
90322
8 oz bottle of bacteriostatic additive to protect against
growth of bacteria and other impurities in portable unit
The selection of emergency eyewash and shower equipment must be selected with care.
There are several important design and engineering issues that must be addressed when
selecting and installing emergency equipment. These include the location of the
installation, the type of water supply and disposal, and handicapped accessibility.
According to ANSI standards, emergency equipment must be installed within 10 seconds
walking time from the hazard location. The units should be both highly accessible and the
path of travel should be on the same level and mutually convenient to reach. The water
supply should be both continuous and capable of providing a flow pressure of PSI 30.
Care needs to be considered for the proper disposal of water so it does not create
additional hazards.
Emergency equipment must follow the requirements of the Americans with Disabilities Act
(ADA). Equipment should be accessible and usable by physically handicapped persons.
All employees should be trained and made aware of the location of installed equipment.
Finally, emergency equipment should be activated weekly or more to assure proper
operation. Document the checks and report any changes or disruption to ensure
continued compliance with ANSI standards.
GRAvIT-EYE® PORTABLE UNIT
16 GALLON GRAvITY-FLOW EYEWASH UNIT
Gravit-Eye® Portable Gravity-Flow Units
PERSONAL EYEWASH BOTTLE STATIONS
Single or Double
Stations available that
are ideal for emergency
first response where a
continuous supply of
water is not available.
Personal eyewash bottle stations provide a sterile, buffered, preserved
saline solution to flush contaminants from eyes and skin.
Rapid-Clear Personal Eyewash Bottle Stations
®
Stations
90331
90332
90333
PAGE 58
Single 16 oz. Rapid-Clear® Personal Eyewash
Bottle Station
Single 32 oz. Rapid-Clear® Personal Eyewash
Bottle Station
Double 32 oz. Rapid-Clear® Personal Eyewash
Bottle Station
Replacement Bottle Solutions
90329
Sterile 16 oz. Rapid-Clear® Personal Eyewash
Bottle Solution
90330
Sterile 32 oz. Rapid-Clear® Personal Eyewash
Bottle Solution
l
1.800.323.7402
Complete Units
90306
6 Gallon Gravity-Flow Portable Eyewash Unit. Meets ANSI Z358.1 for Personal
Eyewash Station Only
90320
16 Gallon Gravit-Eye® Gravity-Flow Portable Eyewash Unit. Meets ANSI Z358.1
Standards
90323
16 Gallon Gravit-Eye® Gravity-Flow Portable Eyewash Unit with Portable Eyewash
Water Collection Tank
Water Collection Tanks
90327
Portable Eyewash Water Collection Tank
90328
Portable Testing Eyewash Water Collection Tank [For Routine Testing Purposes Only]
Available Options / Replacement Parts
90335
Dust Cover for 16 Gallon Gravit-Eye® Unit
90321
Replacement Drain Hose for 16 Gallon Gravit-Eye® Unit
90322
8 oz. bottle of bacteriostatic additive to protect against growth of bacteria and other
impurities in portable unit
90324
Replacement Mounting Bracket for 16 Gallon Gravit-Eye® Unit
90325
Replacement Dispenser Cap for 16 Gallon Gravit-Eye® Unit
90326
Complete Replacement Manifold Assembly for 16 Gallon Gravit-Eye® Unit
90336
Replacement Threaded Cap for 16 Gallon Gravit-Eye® Unit
15 Gallon Portable Eyewash /
Drench Hose Unit Features
• 15 gallon units provide approximately 10
usable gallons (37.9 liters) of water for
effective rinsing of the eyes, face or body.
Note that, under ANSI Z358.1, drench hose
units supplement, but do not replace, other
types of emergency equipment.
• 15 gallon stainless steel pressurized tank
with built-in carrying handles, air intake
fitting, pressure gauge and pressure relief
valve. Tank has approximately 10 gallons
(37.9 liters) usable capacity.
• Eyewash unit contains two gentle spray heads,
each with a “flip top" dust cover, internal flow
control and filter. 1/2" IPS chrome plated brass
stay-open ball valve with flag handle. Pressure
regulator controls eyewash flow to 0.65 GPM
for 15 minutes.
• Drench hose contains a single gentle spray
head with “flip top" dust cover, internal flow
control and filter. Chrome plated brass squeeze
valve with stainless steel lever handle and 6 ft.
reinforced PVC hose.
• Weight: 35.6 lbs. empty, 118.9 lbs. filled
• Unit is completely assembled, pressurized
and water tested prior to shipment
Gravit-Eye® Features
• Self-contained 16 gallon gravity flow
eyewash unit uses gravity to deliver water
through dual spray heads
• Unit delivers over 14 gallons (53 liters)
of water for 15 minutes, thus complying
with the provisions of ANSI Z358.1
for eyewashes
• Unit has a rugged plastic tank that can be
installed in a wide variety of locations
• Unit is ideal for use where a continuous
supply of potable water is not available,
especially in remote plant areas, low traffic
and/or low hazard areas
• 16 gallon capacity green polyethylene tank
with built-in carrying handle, heavy wall
construction and reinforced ribs to support
weight of unit
• Water flow is activated by pulling down on
bright yellow eyewash tray. Integral full flow
nozzles deliver soft spray of water. Swing tray
up to storage position to stop flow.
• Waste water is directed into drain opening
in tank basin. 3 ft. long drain hose in basin
directs discharge into floor drain, storage
tank, etc.
• Furnished with epoxy coated steel bracket
for mounting unit on wall. Unit can also be
placed on countertop or other flat surface.
• Bacteriostatic additive, which is supplied with
the unit, protects against growth of bacteria,
fungus, algae and acanthamoeba
• Weight: 13 lbs. empty, 146 lbs. full
• Unit is completely assembled and water
tested prior to shipment
• Meets ANSI Z358.1 for eyewashes
PAGE 59
www.sellstrom.com
l
Faucet Mounted Eyewash Features
• Converts any faucet into an emergency
eyewash station without interfering with
normal faucet operation
• Outlet heads are mounted 3" or 5" apart
and deliver a soft, aerated and unlimited
supply of water. Heads angle forward
toward user and are adjustable to permit
full coverage and avoid splashing
• Furnished with float-off dust covers to
protect outlet heads
• Body has 55/64" - 27 female thread.
Furnished with 3 adapters (15/16"-27,
13/16"-27 and 3/8" IPS) for installing on
most commonly used faucets.
• Completely assembled and water tested
prior to shipment
SENTRYWASH
®
FAUCET MOUNTED & DRENCH HOSE UNITS
SENTRYWASH
®
Mounted Emergency Shower
Features
•
EMERGENCY SHOWER UNITS & SAFETY STATIONS
•
•
•
Drench Hose Eyewash Features
• Dual purpose unit may be left in the deck
flange for use as a fixed, hands free eyewash
or may be removed for use as a drench hose
• Two spray heads mounted side-by-side.
Each head has a “flip-top" dust cover,
internal flow control and filter to remove
impurities from the water flow.
• 8' reinforced PVC hose. 300 PSI maximum
working pressure
Deck or Wall Mounted Features
• Deck eyewash units for mounting on counter
next to sink. Spray heads swivel 90 degrees
from storage to operational position. Water
flow is activated by flag handle. Unit is
mounted on right side of sink. Furnished with
locknut and washer for securing unit to
countertop.
• Wall mounting eyewash units include heavy
duty cast aluminum wall bracket with
corrosion resistant powder coated finish
• Each spray head has a “flip top" dust cover,
impurities from the water flow
• Available with either an 11 1/2" diameter
blue ABS plastic or stainless steel bowl
Pedestal Mounted Features
• Free standing, pedestal mounted eyewash
includes spray-type spray heads delivering a
flood of water for rinsing eyes
• Each spray head has a “flip top" dust cover,
impurities from the water flow
• 1/2" IPS chrome plated brass stay-open ball
valve. Valve is US-made with chrome plated
brass ball and Teflon® seals.
• Available with either a 11 1/2" diameter
blue ABS plastic or stainless steel bowl
• Valve, bowl and spray head assembly is
factory assembled and water tested prior to
shipment
• Specialized “barrier-free" model available
that complies with governmental regulations
(28 CFR Part 36) and compliance standards
(ANSI 117.1-1)
PAGE 60
l
1.800.323.7402
SentryWash
®
SentryWash
•
®
vertical/Ceiling Mounted Emergency Drench Showers
Faucet Mounted Eyewash Units
90100
Faucet Mounted Eyewash Unit with Adjustable Aerated Outlet Heads 3" Apart
90101
Faucet Mounted Eyewash Unit with Adjustable Aerated Outlet Heads 5" Apart
for Gooseneck Type Faucets
90211
Hand Held Drench Hose Eyewash Units
90600
Hand Held Drench Hose Unit
90600-2
Hand Held Drench Hose Unit with Wall Hook
90602-1
Hand Held Drench Hose Unit / Eyewash Unit with Deck Mount
90602-2
Hand Held Drench Hose Unit / Eyewash Unit with Wall Mount
Horizontal/Wall Mounted Emergency Drench Showers
SentryWash®
Deck or Wall Mounted Eye/Face Wash Units
Eyewash
90430
Deck Mounted Eyewash Unit with 2 Gentle Spray Outlet Heads & a
Right Hand Counter Mount Swivel
90440
Wall Mounted Eyewash Unit with Stainless Steel Bowl, 2 Gentle Spray
Outlet Heads & a Right Hand Swivel
90445
Wall Mounted Eyewash Unit with Blue Plastic Bowl, 2 Gentle Spray
Outlet Heads & a Right Hand Swivel
Eye & Face Wash
90410
Wall Mounted Eye/Face Wash Unit with Stainless Steel Bowl, 4 Fine
Spray Outlet Heads & a Right Hand Swivel
90415
Wall Mounted Eye/Face Wash Unit with Blue Plastic Bowl, 4 Fine
90420
Wall Mounted Eye/Face Wash Unit with Stainless Steel Bowl, 2 Fine
Pedestal Mounted Eye/Face Wash Units
Eyewash
90450 Pedestal Mounted Eyewash Unit with Stainless Steel Bowl,
2 Gentle Spray Outlet Heads & a Right Hand Swivel
90450-4 Same as #90450 with Hand Foot Control
90455 Pedestal Mounted Eyewash Unit with Blue Plastic Bowl,
2 Gentle Spray Outlet Heads & a Right Hand Swivel
90455-4 Same as #90455 with Hand Foot Control
Eye & Face Wash
90452 Pedestal Mounted Eye/Face Wash Unit with Stainless Steel Bowl &
4 Fine Spray Outlet Heads
90457 Pedestal Mounted Eye/Face Wash Unit with Blue Plastic Bowl &
4 Fine Spray Outlet Heads
90235
90243
90243-2
90243-3
Vertical / Ceiling Mounted Drench Shower with Stainless Steel Shower Head &
Stay Open Valve
Vertical / Ceiling Mounted Drench Shower with Blue Plastic Shower Head &
Slow Self Closing Valve
Horizontal / Wall Mounted Drench Shower with Blue Plastic Shower Head &
Stay Open Valve
Horizontal / Wall Mounted Drench Shower with Stainless Steel Shower Head &
Stay Open Valve
Horizontal / Wall Mounted Drench Shower with Stainless Steel Shower Head &
Slow Self Closing Valve
Eyewash & Shower Safety Stations
90510
Eyewash/Drench Shower Unit. Stainless Steel Bowl w/ 2 Gentle Spray
Head Outlets & Blue Plastic Shower Head
90510-2 Eyewash/Drench Shower Unit. Stainless Steel Bowl w/ 2 Gentle Spray
Head Outlets & Stainless Steel Shower Head
90520 Eyewash/Drench Shower Unit Blue Plastic Bowl w/ 2 Gentle Spray Head
Outlets & Blue Plastic Shower Head
90520-3 Eyewash/Drench Shower Unit. Blue Plastic Bowl w/ 2 Gentle Spray Head
Outlets & Blue Plastic Shower Head with Self Closing Valve
90520-4 Eyewash/Drench Shower Unit. Blue Plastic Bowl w/ 2 Gentle Spray Head Outlets, a Blue
Plastic Shower Head & Hand-Foot Control Assembly
90530 Barrier Free Eye/Face Wash/Drench Shower Unit. Stainless Steel Bowl w/ 4 Fine Spray
Head Outlets & Blue Plastic Shower Head with Stay Open Valve
90550 Eyewash/Drench Shower Unit. Blue Plastic Shower Head w/ Stay Open Valve (No Bowl)
90560 Corrosion Resistant - All PVC Eyewash/Drench Shower Unit. Blue Plastic Bowl w/
2 Gentle Spray Head Outlets & Blue Plastic Shower Head
90562 Freeze Resistant Eyewash/Drench Shower Unit. Stainless Steel Bowl w/ 2 Gentle Spray
Head Outlets & Blue Plastic Shower Head & Stay Open Valve
90570 Corrosion Resistant - All Stainless Steel Construction Eyewash/Drench Shower Unit.
Stainless Steel Bowl w/ 2 Gentle Spray Head Outlets & Stainless Steel Shower Head &
Stay Open Valve
•
Delivers 30 GPM at 30 PSI and a
spray pattern of a 20" diameter
at 60" above the floor
10" diameter shower head is available
in blue ABS plastic or stainless steel
Stay-open valve options have a 1" IPS
chrome plated brass stay-open ball
valve. Valve is US-made with chrome
plated brass ball and Teflon® seals.
Furnished with stainless steel
actuating arm and 29" stainless
steel pull rod.
Self-closing valve option has a 1" IPS
chrome plated brass self-closing
valve with pull chain and ring. Shower
operates for up to 10 seconds after
chain is released.
Valve is made in the USA.
Vertical and Horizontal Mounted
Emergency Drench Showers with a
Self-closing Valve do not comply with
ANSI Z358.1 Standards
Vertical and Horizontal Mounted
Emergency Drench Showers
with a Stay Open Valve meet
ANSI Z358.1-Standards
Safety Station Features
•
•
•
•
•
•
•
Delivers 30 GPM at 30 PSI and a spray
pattern of a 20" diameter at 60"
above the floor
10" diameter shower head is available
in blue ABS plastic or stainless steel
Each spray head has a “flip top" dust
cover, internal flow control and filter
to remove impurities from water
Valve and spray head assemblies are
factory assembled and water tested
prior to shipment
Stay-open valve options have a 1" IPS
chrome plated brass stay-open ball
valve. Valve is US-made with chrome
plated brass ball and Teflon® seals.
Furnished with stainless steel
actuating arm and 29" stainless steel
pull rod.
Self-closing valve option has a 1" IPS
chrome plated brass self-closing
valve with pull chain and ring. Shower
operates for up to 10 seconds after
chain is released.
Valve made in USA.
All Emergency Showers meet ANSI
Z358.1 Standards (Except Showers
with a Self-closing Valve)
Accessories / Replacement Parts
90159
90175
90177
90900
90905
11 1/2" Blue ABS Plastic Bowl
11 1/2" Stainless Steel Bowl
Stay Open Ball Valve
Deck Flange
Hand/Foot Control Assembly
90943
90944
90700
90702
10" Blue ABS Plastic Shower Head
10" Stainless Steel Shower Head
Complete Gentle Spray (GS Plus) Spray
Head Assembly
Gentle Spray (GS Plus) Spray Head Covers
PAGE 61
www.sellstrom.com
l
FALL PROTECTION SAFETY
The Widest Span of Fall Protection!
Since 1972, RTC® has met the fall protection needs of companies
in diverse industries throughout the world. Whether you need basic
equipment, or an engineered fall protection system, RTC® can
meet your needs. We offer a full line of fall protection products
that are as varied as the world of work itself. Every item is
designed for durability. All products are extensively tested and
meet or exceed all mandated safety requirements.
How To Order
Leading distributors throughout the world stock and sell RTC® Fall Protection
products. For information on your nearest RTC® distributor call 1.800.323.7402
(within the United States), 847.358.2000 or fax 847.358.8564. Additional product
information is available at www.fallprotection.com.
We can also design Engineered Systems for every fall arrest
application and budget. Our experienced in-house professional
staff will engineer a cost-effective safety system to meet your
requirements. RTC® Custom Solutions™ provides turnkey installation
and training services.
ANSI and OSHA
1.800.323.7402
The American National Standards Institute (ANSI) and the Occupational Safety
and Health Act (OSHA) are currently the two standards organizations with the
greatest presence in the American industrial safety society. RTC® products, with
such exception as noted, are developed and tested to meet these two
standards. However, these are not the only standards in the industry. RTC® works
diligently to keep abreast of all of the standards released by these organizations.
Needless to say, many standards are subject to change without notice.
For more information about RTC® fall arrest systems contact us at
1.800.323.7402. email us at [email protected] or visit our
website: www.fallprotection.com.
RTC® FALL PROTECTION is proudly affiliated with:
Job Protection Product Chart
ASSE
DPA
IDC
ISEA
ISMA
NSC
SEDA
SMG
STAFDA
While this chart provides general recommendations as to which Sellstrom or RTC
product types are to be used for eye, ear, face, head and respiratory protection,
it should be used as a general guide only and not a mandatory prescription. Each
application should always be considered on its own merits since there are usually
many variables that must be taken into account. In general, however, this chart
follows the recommendations of the American National Standards Institute.
®
®
Sellstrom Safeguards & RTC Fall Protection Safety Products
Extra Big Harnesses
71
Accessories
72
Bulk Rope
73
Roofing Kits
74
Lanyards
75
TankTrolley™
79
Anchorage Connectors
80
Retractable Lanyards
82
Confined Space Systems
86
Controlled Descent
88
Davit Arm Retrieval Systems
90
Vertical Fall Arrest
92
Ladder Climbing Systems
93
Temporary Lifeline Systems
96
Permanent Lifeline Systems
97
RTC® Custom Engineered Solutions
98
Permacable® Systems
98
Sky Anchor™ Systems
99
Sky Anchor™ II Systems
99
Abbreviations
Job protection product chart
Acid Gas,
Dust, Organic
Vapor,
Paint Spray
Chemical
Handling
Chipping,
Woodworking
Fall Protection
Construction,
Mining,
Forestry &
Utilities
Electrical
Welding
Gas Welding
and Cutting
Grinding,
School Shop
Laboratory,
Metals
Machining
Hazards
Molten
Overhead
x
Protective Eyewear
Cover & Splash Goggles
x
x
x
x
x
x
x
x
x
x
4
x
x
x
4
x
Hard Hats & Liners
x
x
Hearing Protection
x
x
x
4
x
x
4
Faceshields & Windows
x
Welding Helmets
Welding Curtains/Screens
l
x
x
High Temp Fabrics
Emergency Shower & Eye Wash Equipment
x
x
Welding, Cutting & Grinding Goggles
PAGE 62
64
®
®
Work
Operation Job
Hazard
American Society of Safety Engineers
Distributor Partners of America
Independent Distributor Cooperative
International Safety Equipment Association
Industry Supply Manufacturers Association
National Safety Council
Safety Equipment Distributors Association
Safety Marketing Group
Specialty Tools & Fasteners Distributors Association
Harnesses
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Part No.
Description
Part No. Description
316
4
6
AL
B
BW
C
CMH
FD
G
GC
HLL
ILT
K or F
316 Stainless
4'
6'
Aluminum
Bungee
Beam Walker
Quick Connect
Construction Market Harness
Front D-Ring
Galvanized
Galvanized Cable
Horizontal Lifeline
In Line Tensioner
Kevlar® Fiber
LSF
P
PE
PS
PSE
Q
REM
S or SS
SRC
T
URC
VLL
W
WA
Light, Simple, Fast
Polyester
Pro-Elite
Polyester Web
Polyester Spliced Eye
Quick Connect LSF
Removable
Stainless Steel
Stainless Rung Clamp
Tongue Buckle
Universal Rung Clamp
Vertical Lifeline
Work Positioning Lanyards
Work Positioning D-rings
x
PAGE 63
1.800.323.7402
l
www.fallprotection.com
Advantage™ Harness
Features
• Adjustable back D-ring
• Chemical resistant polyester
webbing
• Convenient inspection
grid on label
• Separate serial number for
each harness for tracking
and record keeping
• Color coded shoulder and
thigh straps for select
models
• Quick-connect buckles
on leg straps for select
models
• Multiple adjustment
points for best fit
• Available in cross-over
or traditional vest style
• Available with adjustable
front D-ring on
non-slide pad
• Safe-T-Fold stress indicator
alerts the user when the
harness has been stressed
• Meets OSHA 1926
subpart M, 1910.66
appendix C, and ANSI
Z359.1 Standards
Our most economical line!
Advantage™ II Harness
4400 Series Harnesses Polyester Webbing
(3 Point Adjustable Harnesses: Chest and Legs)
HARNESSES
The Advantage™ Series harnesses are lightweight for an all day comfort. These
ergonomically designed full-body harnesses are our most economically priced
options for safety.
RTC's newest Advantage™ Series Harness is the Hi-viz Reflective Harness. Orange
in color this harness increases job-site visibility in low-light environments;
its 1.75" polyester webbing has 5 woven-in reflective tracers and provides
easy location when there is a need to be seen. Chemically resistant unlike
other harnesses with appliques that can wear away. This Advantage™ Series
harness has a convenient inspection grid on it's label with a Serial Number to
aid in record keeping and tracking. It offers quick-connect buckles on the leg
straps Leg Straps and meets ANSI Z359.1-2007 Standards, 1910.66 Appendix C,
and OSHA 1926 Subpart M.
5-Point Adjustable Harness:
Chest, Legs and Shoulders for Best Fit
Adjustable Zinc-Plated Steel
D-Ring On Non-Slide Pad
4400-EP1
Quick Attach Full-Body Harness
4400-BA1
4400-BA1CKT Quick Attach Full-Body Harness w/
3254-P6HH lanyard sewn to harness;
includes bag; harness has D-ring
®
Safe-T-Fold®
Stress Indicator
Alerts The User
When Harness
Has Been
Stressed
4400-BA1WA
Quick Attach Full-Body Harness w/
work positioning side D-rings
4400-EP1WA
Quick Attach Full-Body Harness w/
4400-PT2
Tongue Buckle Leg Strap Full-Body
Harness
4400-PT2WA
Tongue Buckle Full-Body Harness w/
4400-PTP20
Tongue Buckle Full-Body Harness w/
2 foot Extension
Advantage™ Reflective
Webbing Harness
4431-PC2HV
PAGE 64
l
Quick Attach Full-Body Harness,
Hi-Viz Orange Webbing w/
3M Reflective Thread
4400-PT2EXP Tongue Buckle Full-Body Harness w/
6 foot Shock-Absorbing Lanyard Sewn
to Harness. Has D-ring & Lanyard has
1 Double Locking Snaphook
PAGE 65
1.800.323.7402
l
Advantage™ Harness
Features
webbing
grid on label
and record keeping
• Color coded shoulder and
thigh straps for select
models
• Quick-connect buckles
on leg straps for select
models
• Multiple adjustment
points for best fit
• Available in cross-over
or traditional vest style
• Available with adjustable
front D-ring on
non-slide pad
alerts the user when the
harness has been stressed
• Meets OSHA 1926
subpart M, 1910.66
Z359.1 Standards
Advantage™ Harnesses
Economical, with additional adjustments to fit
harder to fit workers.
4430 Series Harnesses 1.75" Polyester Webbing / 2" Zinc-plated steel D-ring
(5 Point Adjustable Harnesses: Chest, Legs and Shoulders)
4431-PC2
4431-EP1
4431-PC2WA
4433-FD2
4454-KIT01
Quick Attach Full-Body Harness & 6' Shock-Absorbing Lanyard with 2 Double Locking
Snaphooks IN BUCKET
4454-KIT02
Quick Attach Full-Body Harness & 6' Shock-Absorbing Lanyard with 2 Double Locking
Snaphooks IN BAG
4454-KIT03
Quick Attach Full-Body Harness with work positioning side D-rings & 6' Shock-Absorbing
Lanyard with 2 Double Locking Snaphooks IN BUCKET
4454-KIT04
Quick Attach Full-Body Harness with work positioning side D-rings & 6' Shock-Absorbing
Lanyard with 2 Double Locking Snaphooks IN BAG
Quick Attach Full-Body Harness w/ work positioning side D-rings
Quick Attach Full-Body Front D-ring Harness (climbing, rescue,
controlled descent)
Quick Attach Full-Body Front D-ring Harness with work
positioning side D-rings
4433-XO2
Quick Attach Full-Body 'Cross Over' Style Harness
4433-XO2WA
Quick Attach Full-Body 'Cross Over' Harness with work
positioning side D-rings
4435-PT2WA
l
Quick Attach Full-Body Harness w/ 6' Shock-Absorbing Lanyard sewn to harness; includes
bag; harness has D-ring & lanyard has 1 Double Locking Snaphook
Accessories
8250-LS1
Lanyard Sto™ for use w/ harnesses
7400-PKT
Lanyard Tote Bag
Protect your equipment from sun damage,
abrasion & other inclement elements!
Harness Size Chart
4435-PT2
PAGE 66
4400-BA1CKT
®
4433-FD2WA
Advantage™ Harness/Lanyard Kits
Tongue Buckle Full-Body Harness
Tongue Buckle Full-Body Harness w/ work positioning
side D-rings
Please Note: This Chart is only a guideline. Sizing may vary due to body shape.
Harnesses and Equipment are available for person weighing over 310 lbs.
PAGE 67
1.800.323.7402
l
Pro-Elite™ Harness
Features
• Chemical resistant
polyester webbing
• Heavy duty hardware
for superior strength
• Convenient Inspection
Grid on label
• Separate serial
numbers for each
harness makes record
keeping & tracking easy
• Color coded shoulder &
thigh straps
• Safe-T-Fold stress
indicator
• Meets OSHA 1926 subpart
M, 1910.66 appendix C,
and ANSI Z359.1 Standards
®
PRO-ELITE™ HARNESSES
The Pro-Elite Harnesses fall protection series offers great comfort,
great features and a great value!
™
Pro-Elite™ 4435-PE2
Polyester Webbing
4435-PE2
Universal Fit Back D-ring
Harness with Full Back Support,
Tool Belt, Shoulder Pads and
Work Positioning Side D-rings
4435-PE2S
EXTRA SMALL for workers
130–160 lbs. (see harness
sizing chart on page 67)
4435-PE2E
EXTRA LARGE for workers
180–310 lbs. (see harness
sizing chart on page 67)
4435-QL1
Padded Full-Body Harnesses
with Parachute Buckles
4435-QL1WA
Padded Full-Body Harnesses
with Parachute Buckles and
®
7435 Series Vest Style Full Body LSF Harness w/ Tongue Buckle Leg Straps
1.75" Polyester Webbing / 2" Zinc-plated forged steel D-ring
l
7435-PT2
7435-PT2S
7435-PT2E
Tongue Buckle Full-Body Harness
Tongue Buckle Full-Body Harness Extra Small (130–160 lbs.)
Tongue Buckle Full-Body Harness Extra Large (225–310 lbs.)
7435-PT2CL
Tongue Buckle Full-Body Harness w/ 1 left side climbing D-ring
(for use w/ RTC ladder climbing systems)
7435-PT2W
The 7430 Series LSF™ Harness is a lightweight and easy-to-use line of full-body
harnesses.
®
These ergonomically designed harnesses feature RTC®'s unique Safe-T-Fold stress
indicator which alerts the user when the harness has been stressed and should be
removed from service.
7435 Series LSF™ Harness
Features
• Flexible D-ring pad for
comfort
• Quick and easy to put on
• Heavy-duty hardware for
superior strength
webbing
• Ideal for use by several
workers (tongue buckles
make adjustment quick and
easy)
• Available in XS - XL sizes
• Weighs only 3 lbs.
• Convenient inspection date
grid on harness
and record keeping
• Meets OSHA 1926 subpart M,
1910.66 appendix C, and
Z359.1 Standards
®
7435-PT2EWA Tongue Buckle Full-Body Harness Extra Large (225–310 lbs) w/ Work
Positioning side D-rings
7430 SERIES LSF™ HARNESS
Tongue Buckle Full-Body Harness w/ Padded Work Positioning Belt &
7435-PT2WA Tongue Buckle Full-Body Harness w/ work positioning side D-rings
LSF Harnesses
™
7430 Series Vest Style Full Body LSF™ Harness w/ Quick-connect Leg Straps
1.75" Polyester Webbing / 2" Zinc-plated forged steel D-ring
7430-PQ2
7430-PQ2S
7430-PQ2E
Quick Attach Full-Body
Harness
Quick Attach Full-Body
Harness (Small)
Quick Attach Harness w/
Back D-ring (Extra Large)
7430-PQ2EXP Quick Attach Full-Body
Harness w/ 6' ShockAbsorbing Lanyard Sewn to
Harness. One Snaphook at
the End of the Lanyard
PAGE 68
The 7430 Series LSF™ Harness is a lightweight and easy to use line of fullbody harnesses that feature RTC®'s unique Safe-T-Fold® stress indicator
which alerts the user when the harness has been stressed and should be
removed from service.
LSF™ Harnesses
7430 Series LSF™ Harness
Features
• Flexible D-ring pad for
ultimate comfort
• Quick and easy to don
superior strength
webbing
• Quick-connect leg straps for
one time fitting and fast
donning
• Weighs only 3 lbs.
grid on harness
and record keeping
1910.66 appendix C, and ANSI
Z359.1 Standards
7435 SERIES LSF HARNESS
™
7430-PQ2CL Quick Attach Harness
w/Side D-rings
(For Climbing)
7430-PQ2W Quick Attach Harness
w/ Back D-ring w/Work
Positioning Belt & Side
D-rings
7430-PQD Quick Attach Full-Body
Harness w/2 Shoulder
Rescue D-rings
7430-PQDXL Quick Attach Harness
w/Back D-ring &
Shoulder D-rings (XL)
7435-PTD
Tongue Buckle Full-Body Harness w/ rescue shoulder D-rings
7435-PTP20
Tongue Buckle Full-Body Harness w/ 2-foot lanyard extension & O-ring
PAGE 69
1.800.323.7402
l
7432 Series Utility Harness
Features
• Polyester loop with wear
protection sleeve replaces
traditional metal D-ring on
certain models
• Flexible D-ring pad for comfort
• Made of chemical resistant
polyester web
• Abrasion resistant powder
coated buckles backed by
leather pads
• Features unique Safe-T-Fold
stress indicator
• Convenient inspection date grid
on harness
• Available with adjustable tool
belt loops (7432-PC2TB)
each harness for tracking and
record keeping
Z359.1 Standards
7432 SERIES
UTILITY
HARNESS
Unique dielectric buckles and a
comfortable fit make this
harness the right solution for
utility workers around the world.
®
Harnesses feature tongue buckle leg
straps and RTC®'s unique Safe-T-Fold
stress indicators.
®
Utility Harnesses
7432 Series Full body Utility Harness—Coated Buckles with Leather
Backing & Quick Connect Chest & Leg Straps /Polyester Webbing/web
D-ring with Abrasion Resistant Sleeve / 2 rescue loops
Quick Attach Full-Body Utility Harness with Web Loop D-ring and
front rescue loops
Materials
7432-PC2TB Quick Attach Full-Body Utility Harness with Web Loop D-ring, front
rescue loops and adjustable Tool Belt loops
• Weight: 2 1/4 lbs.
7432-PC3
Quick Attach Full-Body Dielectric Utility Harness
with Non-Sparking Hardware. Features Shoulder
& Leg Padding
PAGE 70
l
®
Extra Big Harness/Lanyard Series
Extra Big Tongue Buckle Full-Body Harness (310-410 lbs) w/
8250-P6HH lanyard sewn to harness
7435-E410RWA Extra Big Tongue Buckle Full-body Harness (310-410 lbs) w/
7000 Series SkyBelt and one rebar hook
7435-E410Y
8250-P6H3 “Y" lanyard sewn on
7435-E410YCK
8252-P6H3CK “Y" tie-back lanyard sewn on
7435-E410YWA
8250-P6H3 “Y" lanyard & work positioning side D-rings
Accessories
8250-LS1
Lanyard Sto™ for use w/ harnesses
7400-PKT
Lanyard Tote Bag
A safe way to keep your unused lanyard leg out of the way!
• Flexible D-ring pad
for comfort
• 5 points of adjustability
superior strength
polyester webbing
grid on harness
• Designed for 310 lbs.
to 410 lbs. user
and record keeping
M and 1910.66 appendix
C Standards
Each has five points of adjustability,
polyester webbing and zinc plated
steel hardware.
7435-E410
• Buckles: Coated quick attach
mating buckles
• D-Ring: Polyester loop
When you need fall protection to fit
the "Big Boys", 310 lbs. - 410 lbs. RTC®
has several lightweight, easy to don,
full-body harnesses. Each harness
includes an integral back attached
lanyard designed to safely absorb
shock when larger workers fall.
For use near electrical hazards!
7432-PC2
• Webbing: 1.75" polyester
having a minimum break
strength exceeding the ANSI
standard of 5000 lbs.
7435 EXTRA
BIG HARNESS
LANYARD
SERIES
7435 Extra Big Harness/
Lanyard Series Features
PAGE 71
1.800.323.7402
l
Welder's Coat
• Durable treated flame
resistant 100% 12 oz.
cotton twill fabric
• Cotton fabric allows a cool,
comfortable feel
• Flexible and lightweight
• Less than half the price of
a leather coat
• Welder's protective lanyard
sleeve also available
• Flame resistant treatment
lasts up to 25 industrial
laundering and 50 home
laundering
High vis PPE vest
• Lightweight (1.6 lb) and
breathable
• Available in five sizes for a
comfortable fit, sides
adjust for a perfect fit
• Durable and home
launderable
• Heavy duty construction
• Typical life cycle of 12 - 24
months with constant use
• All fabrics are third party
tested for compliance to
ANSI/ISEA 107-1999
standards
• Meets ANSI/ISEA 107-1999
class 2 standards
(small size meets class 1)
• Made in the USA
PPE GARMENTS & ACCESSORIES
Protective accessories for harness wearing workers
Class 2 PPE High visibility vest
7000 Series PPE Garment without pockets
(SERIES DOES NOT INCLUDE HARNESS)
7000-VS
PPE Garment w/o Pockets, size S (Harness NOT included)
7000-VM
PPE Garment w/o Pockets, size M (Harness NOT included)
7000-VL
PPE Garment w/o Pockets, size L (Harness NOT included)
7000-VXL
PPE Garment w/o Pockets, size XL (Harness NOT included)
7000-VXXL
PPE Garment w/o Pockets, size XXL (Harness NOT included)
Welders Jacket for Safety Harness
Your whole body should
be protected from
welding spatter!
7002 Welder’s Jacket Series (SERIES DOES NOT INCLUDE HARNESS)
7002-WCM
Fire Retardant Cotton Welders Jacket for Safety Harness,
Size Medium
7002-WCL
Size Large
7002-WCXL
Size X-Large
7002-WCXXL
Size XX-Large
7002-WCXXXL Fire Retardant Cotton Welders Jacket for Safety Harness,
Size XXX-Large
Accessories
7000-MAN
7400-PKT
8250-LS1
Foam Harness Display Mannequin
Lanyard Tote Bag for Harness
Lanyard Sto™ for Use with Harnesses
Work Positioning Belts
7000 Work Positioning Belts Series
7000-BLTM
Work Positioning Belt with Padded Lumbar Support, Size M
7000-BLTL
Work Positioning Belt with Padded Lumbar Support, Size L
7000-BLTXL
Work Positioning Belt with Padded Lumbar Support, Size XL
7000-BLTXXL
Work Positioning Belt with Padded Lumbar Support, Size XXL
7000-BLTQC
Quick Connect Work Positioning Belt with
Padded Lumbar Support
Fall Protection Signage
9600-HZD1
PAGE 72
l
Plastic Fall Hazard Warning Sign. 7" x 10" for Wall Mounting,
made from Recycled Plastic
BULK ROPE
White Standard Rope
RTC®'s standard rope is available in
lengths of 150', 200', 300', and 600'.
This polyester rope is 5/8" in diameter,
with red tracer thread. Its three-strand
construction allows inspection of inner fibers.
Kernmantle Rope
Designed to absorb energy, 1/2" Kernmantle rope has a braided jacket
covering bundles of twisted, spring-like fibers. Kernmantle rope is
available in White, Red, Blue, Safety Green, Black and Orange in lengths
of 150', 200', 300' and 600'.
White Rope Features
• Polyester rope with red
tracer thread
• 5/8" diameter rope
• Tensile strength: 11,600 lbs.
• Three-strand construction
allows inspection of inner
fibers
• Rappelling, Caving,
Canyoneering, Climbing,
Arborist, and Rope Courses
Kernmantle Rope Features
• UL Classified to NFPA
1983:2006
• 1/2" diameter rope
• Tensile strength: 10,000 lbs.
• General use rope
White Polyester Rope
9450-PR58150
9450-PR58200
9450-PR58300
9450-PR58
9450-PRHH025
150' 5/8" diameter white polyester Safety Rope
25' white polyester Safety Rope with 2 Double Locking Snaphooks
Kernmantle Colored Polyester / Nylon Rope
9450-KM12150B
9450-KM12200B
9450-KM12300B
9450-KM12600B
9450-KM12150G
9450-KM12200G
9450-KM12300G
9450-KM12600G
9450-KM12150K
9450-KM12200K
9450-KM12300K
9450-KM12600K
9450-KM12150O
9450-KM12200O
9450-KM12300O
9450-KM12600O
9450-KM12150R
9450-KM12200R
9450-KM12300R
9450-KM12600R
9450-KM12150W
9450-KM12200W
9450-KM12300W
9450-KM12600W
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / blue
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / green
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / black
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / orange
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / red
150' 1/2" diameter Kernmantle polyester/nylon Safety Rope / white
PAGE 73
1.800.323.7402
l
Advantage™ Roofing Kit
Features
• For fall arrest & fall restraint
• Rated for one worker with
tools to 310 lbs.
• Available in 25' or 50'
systems with single use or
reusable roof bracket
• Quick installation
• Available with draw string
kit bag in retail display box,
or in convenient storage
bucket with carrying handle
harness, lanyard and lifeline
• Lightweight harness is
comfortable and easy to use
each harness and Ropelok
for tracking and record
keeping
• Meets OSHA and ANSI
standards
3252 Series Features
ROOFING KITS
The Advantage™ RoofRite® System
is the ideal fall protection means for
sloped roof construction applications.
The RoofRite® bracket attaches to
sloped roofs at the peak of wood
frame structures to provide a stable
anchor point. The complete RoofRite®
system includes: 1 roof bracket,
mounting nails, 25' or 50' rope lifeline
with double locking carabiner,
Ropelok® with shock-absorbing
lanyard, and full body harness.
When installed properly, the RoofRite®
system provides a 5,000 lb.
single use anchorage.
3252 & 3254
Series Lanyards
The 3252 Series Advantage™ lanyard is a
lightweight, flexible and economical
connection between an RTC® harness and
an anchorage. These shock-absorbing
lanyards feature a deceleration distance of
42 inches or less. The 3252 Series Lanyards
are available in four configurations including
a Y-lanyard that helps maintain continuous
protection. The 3254 Series Advantage™
lanyard is a lightweight, flexible and
economical connection between an RTC®
harness and an anchorage. These durable,
chemical resistant lanyards include an inner
polyester core that stretches to reduce the
arresting force in the event of a fall. The
shock absorbing lanyards feature a
deceleration distance of 42 inches or less.
The 3254 series lanyards are available in
three configurations including a Y-lanyard
that helps maintain continuous protection.
Advantage™ Lanyards
RoofRite Systems
®
SINGLE USE ROOF BRACKET
Contains: 4400-BA1 Harness, 2500-OP3E3 Ropelok™ Lanyard Combo, Rope Lifeline:
5/8" Polyester w/ double locking carabiner, Roof bracket mounting nails
25' RoofRite System in drawstring bag w/ retail display box
9300-RK3
9300-RK3BK 25' RoofRite System in storage bucket
9300-RK4
All lanyards feature 3600 lb. gate
strength hooks & 900 lb. MAF.
3252 Series Shock-Absorbing Lanyards (Visible Shock Pack)
1" Polyester Webbing
3252-P6H3
6' Shock-Absorbing Y-Lanyard w/ 3 Double Locking Snaphooks
3252-P6HH
6' Shock-Absorbing Lanyard w/ 2 Double Locking Snaphooks
3252-P6HHCK 6' Tieback Lanyard (single leg)
3252-P6H3CK 6' Tieback Y-Lanyard (double leg)
3252-P6HR3 6' Shock-Absorbing Y-Lanyard w/ 1 Double Locking Snaphook & 2 Rebar Hooks
3252-P6HR3L 6' Y-lanyard w/ Rebar Hook & Loop (in place of double locking snaphook)
3252-P6HRH 6' Shock-Absorbing Lanyard w/1 Double Locking Snaphook & 1 Rebar Hook
®
®
®
®
REUSABLE ROOF BRACKET
9300-RK5
9300-RK6
®
®
®
®
Accessories
9300-RB1
9300-RB3
2500-OP3E3
PAGE 74
l
Advantage™ Shock-Absorbing Lanyards
Great for scaffold work!
3252 Series – “Bungee Style/Stretch" Shock-Absorbing Lanyards (Material stretches 8")
3252-P6H3B 6' Shock-Absorbing Stretchable Y-Lanyard w/ 3 Double Locking Snaphooks
3252-P6HHB 6' Shock-Absorbing Stretchable Lanyard w/ 2 Double Locking Snaphooks
3252-P6HR3B 6' Shock-Absorbing Stretchable Y-Lanyard w/ 2 Rebar Hooks & 1 Double
Locking Snaphook
3252-P6HRHB 6' Shock-Absorbing Stretchable Lanyard w/ 1 Rebar Hook & 1 Double Locking
Snaphook
Advantage™ Lanyards
Roof Bracket / single use
Roof Bracket / reusable
Ropelok™ Lanyard Combo
3254 Series – Shock-Absorbing Lanyards (Material does NOT stretch)
3254-P6H3
6' Shock-Absorbing Y-Lanyard w/ 3 Double Locking Snaphooks
3254-P6HH
3254-P6HR3 6' Shock-Absorbing Y-Lanyard w/ 2 Rebar Hooks & 1 Double Locking Snaphook
3254-P6HRH 6' Shock-Absorbing Lanyard w/ 1 Double Locking Snaphook & 1 Rebar Hook
• Available in models featuring
a visible “shock pack" or
models with “bungee
style/stretch" with shock
absorber sewn inside
polyester material.
• One-piece, flat, polyester
webbing is resistant to
chemicals
• Double locking snaphooks
reduce the chance of roll-out
or accidental disengagement
from D-ring
• Clear cover on shock
absorber for complete
inspection
each lanyard for tracking and
record keeping
• Wear pads on metal snaphooks ensure long lasting
strength
• Shock absorber sewn inside
polyester material (No
Stretch)
• Lightweight & Flexible
• Low arresting forces
proof tested to 3,600 lbs.
• Yellow sleeve protects entire
lanyard
each lanyard for tracking
and record keeping
• Chemical-resistant polyester
webbing
PAGE 75
1.800.323.7402
l
2350, 3280, 8260, 8270,
date grid on label
polyester rope or web in
8270 & 8280 series
proof tested to 3,600 lbs.
and record keeping
and ANSI Z359.1
Standards
2350, 3280, 8260, 8270,
8280 SERIES LANYARDS
2350, 8260, 8270, 8280 and 3280 Series Lanyards are designed for work
positioning or fall restraint. These lanyards hold a worker in place leaving both
hands free to work. Any potential free fall must be limited to 2 feet or less. A
fall arrest system must be used in addition when the user is exposed to a fall
hazard. Work positioning lanyards must never be used for fall arrest. They do
not contain shock absorbers or deceleration devices and will apply
dangerously high forces to the user, if used for fall arrest.
Work Positioning Lanyards - Adjustable
5/8" Polyester Rope **NOT FOR FALL ARREST**
2350-P6RH
LanLok™ 6' Rope Lanyard w/ 1 Double Locking Snaphook (other end back
spliced) & 1 Manual Rope Lock Device
8250 & 8252 EXPANDER
SERIES LANYARDS
®
8250 & 8252 Expander®
Features
A Flexible, Compact, Shock-Absorbing Lanyard
The 8250 Expander® Shock-Expanding Lanyard is one of the safest and most
reliable lanyards ever developed. This durable, chemical resistant lanyard
includes double locking snaphooks and a hidden stress tag which appears
once a lanyard is stressed. The 8250 Series is available in 4-foot and 6-foot
lengths. The 8252 Expander® Shock-Expanding Lanyard is flexible and compact.
The clear cover over the shock absorber allows for easy inspection. The 8252
Series is available in 2', 3', 4' and 6' lengths.
®
8250 Expander
Shock-Absorbing Lanyards
1" Polyester Webbing with Double Locking Snaphooks
Work Positioning Lanyards - Steel Cable
8260 Series Steel Cable Lanyards **NOT FOR FALL ARREST**
8260-C12FT
12' x 3/8" Steel Cable D-Ring Extension Positioning Lanyard
(Eyes on Each End; No Snaphooks)
8260-C36
36" x 5/16" Galvanized Steel Cable Eye and Eye Sling
8250-P4HH
8250-P6H3
8250-P6HH
Work Positioning Lanyards - 1/2" Polyester Rope
Shock-Absorbing Tie Back Style Lanyards
6' Shock-Absorbing "Y" Lanyard w/ 3 Double Locking Snaphooks
®
8252 Expander
8270 Series Rope Lanyards **NOT FOR FALL ARREST**
8270-P3RHH
3' Positioning Lanyard w/ 2 Double Locking Snaphooks
8270-P4RHH
8270-P6RHH
Work Positioning Lanyards - Polyester Web
8280 Series Web Lanyards **NOT FOR FALL ARREST**
8280-P2WHH
8280-P2WHO
2' Extension Lanyard w/ 1 Double Locking Snaphook & 1 O-Ring
(attaches to harness)
8280-P3WHH
8280-P3WHO
3' Extension Lanyard w/ 1 Double Locking Snaphook & 1 O-Ring
(attaches to harness)
8280-P4WHH
8280-P6WHH
8280-P6WHL
6' Positioning Lanyard w/ 1 Double Locking Snaphook & 1 Rebar Hook
8280-P6WHLA
6' Positioning Adjustable Lanyard w/ 1 Rebar Hook & 1 Double
Locking Snaphook
Work Positioning Lanyards - Rebar Chain & Web Assembly
**NOT FOR FALL ARREST**
3280-RCHAIN3
Large Rebar Hook Assembly with 24" Chain. Double
Locking Snaphooks
3280-RCHAIN4
Large Rebar Hook Assembly with 14" Chain. Double
Locking Snaphooks
3280-RWEB3
Large Rebar Hook Assembly with 24" Web Lanyard.
Double Locking Snaphooks
8280-RCHAIN3
Large Rebar Hook Assembly & Swivel with 24" Chain.
PAGE 76
l
1.800.323.7402
8252-P6H3CK
6' Shock-Absorbing Tie Back Style "Y" Lanyard
w/ 3 Double Locking Snaphooks & 2 Tie Back D-rings
6' Shock-Absorbing Tie Back Style Lanyard
w/ 2 Double Locking Snaphooks
8252-P6HHCK
webbing is resistant to
chemicals
reduce the chance of rollout or accidental
disengagement from D-ring
• Convenient inspection grid
on label
• Clear cover on shock
absorber for complete
inspection
and record keeping
• Available in 2-ft., 3-ft., 4-ft.
and 6-ft. lengths
• Wear pads on metal
snaphooks ensure long
lasting strength
• Adjustable length models
available to reduce free fall
• Tie back style lanyards
available for easy
attachment to anchorage
M, 1910.66 appendix C, and
®
8252 Expander
1" Polyester Webbing with Clear Cover / Double Locking Snaphooks
8252-P2HH
8252-P4H3
8252-P4HH
8252-P6H3
8252-P6H3CKOV 6' Shock-Absorbing Tie Back Style Y-Lanyard w/ an 18" D-ring Extension,
3 Double Locking Snaphooks & 2 Tie Back D-rings
8252-P6HH
8252-P6HHA
6' Shock-Absorbing Adjustable Lanyard w/ 2 Double Locking Snaphooks
8252-P6HL
6' Shock-Absorbing Adjustable Lanyard w/ 1 Double Locking Snaphook
& 1 Web Loop
8252-P6HR3
6' Shock-Absorbing "Y" Lanyard w/ 1 Double Locking Snaphook
& 2 Rebar Hooks
8252-P6HRH
6' Shock-Absorbing Lanyard w/ 1 Double Locking Snaphook
& 1 Rebar Hook
PAGE 77
l
8255 & 8256 Chicago™
Series Features
• Lanyards designed to meet
the latest ANSI Standards
for arresting forces &
deceleration distance
• Lightweight, flexible
economical connection
between an RTC harness
and an anchorage
webbing is resistant
to chemicals
reduce the chance of
roll-out or accidental
disengagement from
D-ring
and record keeping
• Wear pads on metal
snaphooks ensure long
lasting strength
• 8255 lanyards are POY
style and available only
in single leg versions.
• 8256 lanyards are tear
web with visible shock
pack and available in
single leg and double
leg variations
• 8255 & 8256 meet OSHA
1910.66 Appendix C and
OSHA 1926 Subpart M
• 8255 Series meets ANSI
Z359.13 – 2007
• 8256 Series meets ANSI
Z359.13 – 2013
8255 & 8256 CHICAGO
SERIES LANYARDS
™
TankTrolley™ Features
Fuel tank storage
8255 Chicago™ Series
1" Polyester Webbing with Internal Shock Absorber
8255-P6HH
6' Shock-Absorbing Lanyard
8255-PRHRH 6' Shock-Absorbing Lanyard
w/ 1 Double Locking Snaphook & 1 Rebar Hook
8256 Chicago™ Series
1" Polyester Webbing with Clear Plastic Cover
on Shock Absorber
8256-P6HH
6' Shock-Absorbing Lanyard w/ 2 Double Locking
Snaphooks
8256-P6HRH 6 Shock-Absorbing Lanyard w/ 1 Double Locking
Snaphook & 1 Rebar Hook
8256-P6H3
6' Shock-Absorbing “Y" Lanyard w/ 3 Double
Locking Snaphooks
8256-P6HR3 6' Shock-Absorbing “Y" Lanyard w/ 1 Double
Locking Snaphook and 1 Rebar Hook
8256-P6H3CK 6' Shock-Absorbing Tie Back Style Lanyard w/ 3
8256-P6HHCK 6' Shock-Absorbing Tie Back Style Lanyard w/ 2
The TankTrolley™ is designed for use on water and fuel storage tanks.
Provides 5,000 lbs. of anchorage and rides on the top lip of the storage
tank. The 9900-TROLLEY6 can be used with a standard lanyard or a
self-retracting lifeline.
1"
Flange
Opening
• 310 lb. designed
working load
• Fits 1/4" to 1"
flange widths
• Weighs 14.1 lbs.
• Works on storage
tanks with minimum
10' diameter
• Features two roller
bearings and
forged O-ring or
attachment to fall
protection equipment
and ANSI Z359.1
Standards
1-7/8"
Flange
Opening
Lanyard Accessories
8250-FRSLV6 6' Fire Retardent Lanyard Protective Sleeve
(Lanyard Not Included with Protective Sleeve)
Lanyard Tote Bag
7400-PKT
Tear-Away Lanyard Sto™
8250-LS1
(Stores end of lanyard when not in use)
TankTrolley™
Mobile Steel Anchorage Connector -- with two roller bearings and forged O-ring
for attachment
9900-TROLLEY6
TankTrolley™, 1" Flange Opening
9900-TROLLEYGA TankTrolley™, 1 7/8" Flange Opening
PAGE 78
l
PAGE 79
1.800.323.7402
l
9100 Series Carabiners
I-Beam Anchorage
SkyBar
™
•
•
•
•
Lightweight
Portable anchorage clamp
Connects to anchorage beams
Three configurations available for 3.5" to 16"
applications
• Meets OSHA 1926 subpart M, 1910.66 appendix C,
I-Beam Trolley
•
•
•
•
•
Glides along I-beam to provide mobile anchorage
Adjusts to fit common I-beam sizes
Use with a self-retracting lanyard for 2-D protection
Adapts to I-Beam Widths 2-5/8" to 7-1/2"6 appendix C, an
Meets OSHA 1926 subpart M, 1910.66 appendix C, and
I-Anchor – I-Beam Anchor Clamp
• Attaches to I-beam anchorage for horizontal lifeline
anchorage applications
• Adjusts to fit a variety of widths/thicknesses (5.99"x0.260"
to 21.0"x1.0")
• No drilling or welding required
• Meets OSHA 1926 subpart M, 1910.66 appendix C, and ANSI
Z359.1 Standards
9450-SBAR3
9450-SBAR4
9450-SBAR5
9900-TROLLEY2
9900-TROLLEY4
9900-CCCKT
9450-IANCEXT
9450-IANCHOR
SkyBar™ Fixed Anchorage for Horizontal or Vertical I-Beams
Multi-directional Loading
SkyBar™ Sliding Anchorage for Horizontal I-Beams
SkyBar™ Stationary Anchorage for Horizontal I-Beams
I-Beam Trolley for I-Beam 2-5/8" to 5-1/16"
I-Beam Trolley for I-Beam 5-1/16" to 7-1/2"
I-Beam Trolley 2 Replacement Collar
Extended I-Beam Anchor Point
Steel I-Beam Anchor Point
Eyerod Bolt
• Stainless Steel Construction
• Meets OSHA 1926 subpart M, 1910.66
appendix C, and Z359.1 Standards
9260-SSTURN1
18" Adjustable Eyerod
(Includes washer plates & nuts)
9260-SSTURN1X 26" Adjustable Eyerod
(Includes washer plates & nuts)
9260-SSTURN316 26" Adjustable 3/4" Eyerod
PAGE 80
l
9100 Series Stainless Pipe Hook
•
•
•
•
•
Squeeze to open
Attaches around anchorage beam
Available in three sizes
Made from stainless steel
Meets OSHA 1926 Subpart M Standards
91901
91902
91903
91906
Small Anchor Hook w/ 3.9" opening
Medium Anchor Hook w/ 4.7" opening
Large Anchor Hook w/ 6.3" opening
Large Anchor Hook w/ 6.3" opening
(3" attachment opening)
•
•
•
•
•
Double locking
100% proof loaded
Zinc plated steel with twist-lock
Available in a variety of sizes
Meets OSHA 1926 subpart M,
Z359.1 Standards
9108-A
9111-A
9111-SA
9120-A
9121-A
2" Opening Carabiner
5/8" Opening Carabiner
Small Stainless Steel
Carabiner Package
3/4" Aluminum Small
Opening Carabiner
2" Aluminum Large
Opening Carabiner
I-Bolt, Plates & Hooks
• Bolts to anchorage
• Reduces chance of burst-out & roll-out
• Provides identifiable, permanent fall
protection anchorage
• Meets OSHA 1926 subpart M, 1910.66
appendix C, and ANSI Z359.1 Standards
9450-DPLT D-Ring Plate w/ D-ring
9450-DPLTF D-Ring Plate w/ D-ring &
fasteners
9450-IBOLT I-Bolt Assembly
8450-P2DR Anchor Hook w/ Strap
& D-ring
First-Man-Up Equipment
2400 Series Ankalok™
Temporary Anchorage
System
• First man up anchorage
connector
• Fiberglass non-conductive
telescoping pole extends
up to 24'
• Available with several fall
protection systems
2400-ANKA1 Ankalok™ w/ 2300OP3E Ropelok™ rope grab, 20' 5/8"
polyester rope & 5500 Series tote bag
2400-ANKA3 Ankalok™ w/ 2008 Retractor lanyard &
5500 Series tote bag
2401-HOOK Ankalok™ Replacement Steel Hook
2401-POLE Ankalok™ Replacement Pole
2400-PH
Ankalok™ Hot Stick telescoping pole
(up to 24') & steel hook
Swivel 10K
• Different models for
use in both concrete
and steel
• Can be used for
Horizontal Lifeline
Systems, Tie-Back,
Staging, Rigging
and Lifting
• 10,000 lbs/44kN load rating unmatched in the industry
• Revolutionary swivel ring design
allows a D-ring to rotate 360
degrees as well as flip back and
forth at 180 degrees
• The Swivel 10K Anchors pricing is
comparable to other D-rings with
an array of superior features
6600 Series
Anchor Slings
polyester webbing
& zinc-plated forged
steel D-ring
• Several lengths & styles
• Meets OSHA 1926
Subpart M, 1910.66
Appendix C and
Z359.1 Standards
66006600-48
66016601-120
6601-36
6601-72
6601-96
66026603
6603-32
66046604-6
9260-SLING
Wrap Sling 60"L x 4" W w/ 2 D-rings
Wrap Sling 48" L X 4" W w/ 2 D-rings
Choker Sling 60" L x 4" W w/ 2 D-rings
Choker Sling 10' L x 4" W
Choker Sling 36" L x 4" W
Choker Sling 15" L x 1" W w/ 1 D-ring
2' Choker Web Anchor Sling
32" Choker Web Anchor Sling
Cable Sling 6' x 3/8" w/ Loop Ends
Drop Through Anchors
Removable Concrete Anchor
• Can be used in vertical,
horizontal and ceiling/
overhead surfaces
• 5,000 lbs/22kN & 10,000
lbs/44kN load rating under
shear and tensile loads
• Remove and reuse at any
desired location
• Removable Anchors are
efficient; saving time and
labor on every job site.
Workers can remove these
anchors each day, limiting
contractor liability
Drops through hole or opening
in substrate above work area
Toggle Lok
• Can be used in both
concrete and steel.
Fits in a ¾" hole, with
a depth expansion range
of ¼" to 4"
• 5,000 lbs/22kN load
rating under shear and
tensile loads
• Revolutionary design
allows the cable to rotate
360 degrees within the
toggle bar
• At or below the price of
comparable products that
do not offer the same array
of features
9452-MSC
9452-MSS
9452-RB075
9452-RB100
9452-TL075
Swivel D-ring 10K Concrete Anchor
Swivel D-ring 10K Steel Anchor
3/4" Removable Concrete Anchor
1" Removable Concrete Anchor
3/4" Toggle Lok Concrete/Steel Anchor
• Concrete floors, steel
girders, steel grates &
other applications
• 1/4" steel plate with
various cable lengths
and attached to a
swiveling D-ring
• To be used as an over
head 5,000 lbs. anchor
9452-DTA
9452-DTA2
9452-DTA3
9452-DTA4
9452-DTA5
9452-DTA6
12 in. Round Plate with 12 in. Cable
6 in. Round Plate with 6 in. Cable
4 in. Round Plate with 8 ft. Cable
6 in. Round Plate with 8.5 ft. Cable
PAGE 81
1.800.323.7402
l
2713 Chicago SRL Features
•
•
•
•
•
The PC/ABS Housings
provide high strength,
rigidity and UV
stabilization while
reducing weight
and increasing durability.
These housings enclose
and protect the
mechanical assembly
All Webbing used in the
Chicago SRL series is
woven with Dyneema
fabric. Known for its
extreme strength and cutresistance, Dyneema will
prolong the life of the
Chicago SRL in the most
harsh and abrasive
environments while
maintaining its flexibility.
The two Brake Pawls work
independently of each
another; this ensures a
"fail safe" capability if one
would ever stop working
Load Bearing Steel Chassis
is comprised of two hot
rolled steel hangers that
give the block its strength
Brush Cleaning System is
unique; the entry aperture
has a ceramic guide and
two opposing brushes that
help to minimize the intake
of debris into the block
2713 CHICAGO SERIES
SELF-RETRACTING LIFELINES
The Chicago Self-Retracting Lifeline is available with galvanized steel cable or
Dyneema® webbing and is an excellent short-full range block offering light
weight handling, excellent serviceability and exceptional performance. The
smallest and lightest SRL in its class in the world. Lightweight chassis, PC ABS
housing and anti cut Dyneema webbing contribute to its outstanding
strength and performance. The 2713-W6 is so light it can be mounted directly
to the users harness via the rear D connector.
•
•
2713-W6
Dyneema Webbing
SRL
Steel Swivel Snap Hooks
on 2713-G60, 2713-W40,
2713-G30 & 2713-W26
and Aluminum Swivel Snap
Hooks on 2713-W11, 2713W6 & 2713-WD6 incorporate
a load indicator that meets
ANSI Z359.12
The Sealed Brake Module
is sealed with O-rings that
stop water and dust
ingress that would affect
brake efficiency
Standards
2713-W40
Dyneema Webbing
SRL
2713-G60, 2713-W40, 2713-G30
& 2713-W26
• ANSI Z359.14-2012 Class B
• OSHA 1910.66 Appendix C
• OSHA 1926 Subpart M
2713-W11
Dyneema
Webbing
SRL
2713-W11, 2713-W6 & 2713-WD6
• ANSI Z359.14-2012 Class A
• OSHA 1910.66 Appendix C
• OSHA 1926 Subpart M
2713-G60
Galvanized
Cable SRL
2713 Chicago Series Self-Retracting Lifelines®
2713-G60
60' Self-Retracting Galvanized Cable Lifeline — 14.3 lbs.
2713-W40
40' Self-Retracting Dyneema Webbing Lifeline — 9.9 lbs.
2713-G30
30' Self-Retracting Galvanized Cable Lifeline — 9.0 lbs.
2713-W26
2713-W11
2713-W6
2713-WD6
6' Dual Self-Retracting Dyneema Webbing Lifeline — 3.9 lbs.
l
2713-WD6
Dyneema
Webbing SRL
Sellstrom/RTC'S Newest SRL...As Lightweight As It Gets!
Web SRLs
PAGE 82
Additional Features
Sealed Brake Module
Brush Cleaning System
Independent Brake
Pawls and Load Bearing
Steel Chassis
PAGE 83
1.800.323.7402
l
2008 Retractor® Features
• Safe-T-Fold® stress indicator
• Sturdy steel covered with
neoprene housing weighs
only 3 lbs.
• Working load of 310 lbs.
• Quick and easy installation
• Inertial braking mechanism
polyester webbing
• Specialized webbing
provides additional
energy absorption
• Separate serial number
for each self-retracting
lanyard for tracking and
record keeping
• Factory recertification
not required
2008 SERIES RETRACTOR
®
Compact and Durable Self-Retracting Web Lanyard
The 2008 Retractor® is compact and lightweight. This durable retracting-web lanyard
provides the worker with up to 11 feet of mobility
from the anchorage. The 2008
®
Retractor® features our unique Safe-T-Fold stress indicator which alerts the user
when the device has been stressed. An inertial braking mechanism provides instant
locking when a fall occurs. The self-retracting lanyard minimizes tripping hazards
and dangerous falls that can occur with standard lanyards.
2700 SERIES RETRACTALOK
®
Proven Tough...Self-Retracting Lanyards
The 2700 Series Retractalok®
self-retracting lanyards provide
state-of-the-art centrifugal
braking technology to
minimize free fall distance
while cushioning the fall.
Rugged cast aluminum or
molded plastic housings are
lightweight and chemically
resistant. Every Retractalok has
a stress indicator which
automatically alerts the user
that the device has been
stressed. The 2700 Series
Retractalok® is available with
polyester web, stainless steel,
galvanized or high-strength
fiber cable; these affordable
lanyards provide years of
dependable service.
2708 Retractalok®
Features
• State-of-the-art centrifugal
braking mechanism
• Eliminates slack cable
hazards
• Double locking stress
indicating snaphook
• Galvanized, stainless steel,
Kevlar-fiber, or polyesterweb lifelines are available
• Lengths up to 170 ft.
• Two year recertification
period
• Easy to install and use
each self-retracting lanyard
for tracking and record
keeping
Steel Cable SRLs
Cast Aluminum Housing
3/16" - 7x19 Aircraft Steel Cable / Features Stress Indicator Snaphook
2706-G25 25' Galvanized Steel Cable w/ 3/4" Double Locking Snaphook
Web SRLs
2008 Series Retractor®, Neoprene Covered Steel Housing w/ Stainless Steel Swivel, 2" Wide
Polyester Webbing and features Safe-T-Fold® Stress Indicator
2008-P05
5' Web Retractor® w/ 3/4" Double Locking Snaphook
2008-P07
2008-PH07
7' Web Retractor® w/ 3/4" Double Locking Snaphook & 9111-A carabiner
2008-P09
2008-PC09
2008-PC09AL 9' Web Retractor® (same as 2008-PC09) w/ 9120-A Aluminum carabiner
2008-PH09
2008-PS09
9' Web Retractor® No Snaphook & 9111-A carabiner
2008-PC11
2008-PH11
11' Web Retractor® w/ 3/4" Double locking Snaphook & 9111-A carabiner
2008-PH11C
11' Web Retractor® No Snaphook & 9111-A carabiners on Both Ends
2008-P119125 11' Web Retractor® 3/4" Double Locking Snaphooks on Both Ends
PAGE 84
l
Cast Aluminum Housing with Swivel Top
2706-GS15 15' Galvanized Steel Cable w/ 3/4" Double Locking Snaphook & Swivel
WARNING
®
Kevlar® Cable SRLs
1/4" Kevlar Cable / Features Stress Indicator Snaphook (extended lead times on these products)
2704-F25 25' Kevlar Cable w/ 3/4" Double Locking Snaphook
RTC recommends that all
products on these pages be
inspected and re-certified by
RTC® on or before the dates
shown on the product labels
to ensure continued
serviceability. Customers
should contact RTC® directly
for return authorization.
PAGE 85
1.800.323.7402
l
Confined Space System
Features
• No hazardous leg chains
on tripod
• Tripod meets OSHA
5,000 lb. anchorage
point requirement
• Adjustable tripod legs
• Tripod head provides fall
protection anchorage for
more than one user
• Multifunction Extricator®
provides fall arrest and
retrieval capabilities of up
to 140 ft.
• Extricator® available with
galvanized or stainless
steel cable
• RTC® Winch provides
winching capabilities for
material lifting up to 150
ft. and 600 lbs.
• RTC® Winch available with
stainless steel or
galvanized steel
The Extricator® Series of self-retracting lanyards is
equipped with an emergency personnel rescue
winch. Extricators® are available with cable lengths
of up to 140 ft. The RTC® winch provides for material
NO CHAINS.
NO TRIPPING.
LESS HAZARDS.
Tripods
RTC® provides versatile fall
protection and emergency
rescue systems to meet your
confined space needs. On our
Confined Space Systems, the triple
hanging plate provides a fall
protection anchorage for the
user and the attendant. The
absence of leg chains reduces
the tripping hazard near the
confined space opening.
5500 Series Tripods — Lightweight Aluminum / No Leg Chains Required
5500-AT7
7' Adjustable tripod w/ 5500-TOT7 & one 5500-SPLATE guide pulley plate assembly
5500-AT10
10' Adjustable tripod w/ 5500-TOT10 & one 5500-SPLATE guide pulley plate assembly
Extricators®
2756/2758 Series Extricator® II
Galvanized Steel Cable — Cast Aluminum Housing / Galvanized Steel Cable / Bracket Not Included
2758-G25
Extricator® w/ 25' Galv. Cable & stress indicator
2756-G50
Extricator® w/ 50' Galv. Cable & stress indicator
2756-G80
80' 3-way Extricator® w/ stress indicator
2756-G110
2756-G140
Confined Entry & Retrieval Systems
Confined Space System 3 - 7' Tripod
CONF-SYS003 Confined Space System 3 - 7' Tripod includes: (1) 5500-AT7 - 7' Adjustable
tripod w/ 5500-TOT7 Tripod tote bag, (1) 2756-G50 Extricator II w/ 50' SS cable,
(1) 2756-GBRACKT3 Extricator® Mounting Bracket, (1) 9600-TOTL - Large
Equipment Tote Bag
1.800.323.7402
2756/2758 Series Extricator® II Accessories
Mounting Brackets — Brackets attach to 7' & 10' RTC tripods
2756-GBRACKT1 2756 Bracket Assembly 80'+ Units
2756-GBRACKT2 2756 Bracket Assembly 25' Units
®
tripod w/ 5500-TOT7 - Tripod tote bag, (1) 2756-G50 Extricator II w/ 50' SS
cable, (1) 2756-GBRACKT3 Extricator® mounting bracket, (1) 5590-S55 RTC®
Winch (1) 5500-SPLATE Guide, Pulley Plate Assembly, (1) 9600-TOTL - Large
Equipment Tote Bag
®
Call us for
custom
confined
space
solutions.
lifting and lowering. Together they comprise the
ultimate in a portable confined space system.
Products are available separately or together in five
Confined Space System Configurations.
tripod, (1) 2756-G50 Extricator® II w/ 50' SS cable, (1) 2756-GBRACKT3
Extricator Mounting Brkt, (1) 5500-TOT10 - Large Equipment Tote Bag
®
CONF-SYS012 Confined Space System 12 - 10' Tripod includes: (1) 5500-AT10®- 10' Adjustable
tripod w/ 5500-TOT10 - Tripod tote bag, (1) 2756-G50 Extricator II w/ 50' SS
cable, (1) 2756-GBRACKTR3 Extricator® Mounting Bracket, (1) 5590-S55 RTC®
Winch, (1) 5500-TOT10 - Large Equipment Tote Bag
Winches
5590 Series RTC® Winches — Mounting Bracket Included
5590-G80
RTC® Winch w/ 80' Galvanized Cable
5590-G110
RTC® Winch w/ 110' Galvanized
Cable
®
5590-K55
RTC® Winch w/ 55' Kevlar ®Jacketed Cable
5590-K110
RTC® Winch w/ 110' Kevlar Jacketed Cable
5590-MBKTA
RTC® Mounting Bracket Assembly
Rescue Accessories
5500-PINPKG
3 Replacement Tripod Leg Pins
5560-T10
Emergency Rescue Winch [Used w/ Tripod & Attaches to Self-Retracting Lanyard]
7400-SPY
Polyester Web Spreader Bar Assembly
5500-SPLATE
Additional Tripod Pulley Plate Assembly
Equipment Tote Bags
5500-TOT7
7' Tote Bag
5500-TOT10
10' Tote Bag
9600-TOTL
12" x 24" Large Equipment Tote Bag
9600-TOTS
10" x 14" Small Equipment Tote Bag
9600-TOTH
12" x 24" Nylon Harness Tote Bag w/ Drawstring
7400-PKT
Lanyard Tote Bag for Harnesses
tripod w/ 5500-TOT7 Tripod tote bag, (1) 2756-G25 Extricator® II w/ 25' SS cable,
(1) 2756-GBRACKT2 Extricator® Mounting Bracket, (1) 9600-TOTL - Large
Equipment Tote Bag
PAGE 86
l
PAGE 87
1.800.323.7402
l
®
Escape-Rite Features
• Lightweight and compact
• Does not require electrical
Emergency Escape & Controlled Descent Device
power or special operator
training
• Cable lengths from 10 ft. to
300 ft.
• Weather resistant Poly-steel
®
cable has an inner core of
high strength steel jacketed
by a chemical resistant
polyester braid
®
each Escape-Rite for
tracking and record keeping
• 5 Year initial certification
period
• Weather resistant container
available
• Dust cover available
• Angled descent packages in
lengths from 80' to 200'
The Escape-Rite is a compact, lightweight industrial
descent device that can be used for emergency
egress. The Escape-Rite® lowers the user to safety at
a controlled rate of descent. It self-adjusts for each
person's weight, operating by gravity, and uses no
electricity or power. Popular because of the smooth,
dependable rate of descent and ease of operation,
there are no adjustments or special skills needed to
operate the Escape-Rite®. Each unit comes
complete with an installation carabiner, two escape
belts, and a cable storage reel. Its weather-resistant
Poly-steel® cable passes the test of time.
®
When your life is on the line,
depend on Escape-Rite®.
Emergency Descent Systems
1003 Escape-Rite® - Descent Rate approx. 3’ per second
Poly-steel Cable Maximum working load of 310 lbs.
1003-DEV010
10' unit w/ 9111-A carabiner & 2 belts
1003-DEV020
1003-DEV030
1003-DEV040
1003-DEV050
1003-DEV060
1003-DEV070
1003-DEV080
1003-DEV090
1003-DEV100
1003-DEV110
1003-DEV120
1003-DEV140
1003-DEV150
1003-DEV160
1003-DEV170
1003-DEV175
1003-DEV200
1003-DEV250
1003-DEV300
1006 Escape-Rite® - Descent Rate approx. 6’ per second
Poly-steel Cable Maximum working load of 310 lbs.
1006-DEV010
1006-DEV020
1006-DEV030
1006-DEV040
1006-DEV050
1006-DEV060
1006-DEV070
1006-DEV080
1006-DEV090
1006-DEV100
1006-DEV110
1006-DEV120
1006-DEV130
1006-DEV140
1006-DEV150
1006-DEV160
1006-DEV170
1006-DEV180
1006-DEV190
1006-DEV200
1006-DEV250
1006-DEV300
PAGE 88
l
1003 & 1006 Angled Descent Kits
Includes: Ground Anchor, 9111 Carabiner,
Jaw & Turnbuckle, U-Shackle and Wire Rope Cable
4011-0080
Kit for 80' Angled Descent
4011-0090
4011-0100
4011-0110
4011-0120
4011-0130
4011-0140
4011-0150
4011-0160
4011-0170
4011-0180
4011-0190
4011-0200
4011-0250
4011-0300
Emergency Descent Accessories
1000-CBLREL7
7" Replacement Cable Storage Reel
1000-CBLREL9
9" Replacement Cable Storage Reel
1000-CONTNR
Complete weather resistant ABS container
w/ sealed door & internal cable reel
1000-CONTNRA
Complete weather resistant ABS container
w/ sealed door
1000-DC000
Escape-Rite dust cover
1000-RSCRDL
Adult Rescue Cradle Kit w/ carabiner / 100'
Tagline / Tote bag
9260-BLOCK
5/8" Diameter Stainless Steel Pulley Plate
®
Angle
descent
approved
applications
from
45 to 90
degrees
PAGE 89
1.800.323.7402
l
Davit Arm Features
• Provides qualified
anchorage for RTC
Extricators
• All aluminum construction
• Davit systems are
available in multiple offset
mast lengths
• Multiple system
components including
offset mast arm, center
post & connector elbow
• Portable or Permanent
mounting options
• Mounting sleeves allow
masts to pivot 360
degrees and are offered in
plated steel or stainless
steel
and ANSI Z359.1
Standards
®
®
DAvIT ARM RETRIEvAL SYSTEMS
Permanent or Portable Mounting for Self-Retracting Lifelines
Davit Arm Retrieval Systems provide many options for
attaching RTC® Extricator® Lifelines to qualified anchor
points. Davit Arms can be mounted permanently on
floors or walls and can also be mounted on portable
bases which can be moved from location to location.
Davit Arm System Components
Posts & Base – Aluminum
5600-B3656
Base - Expandable from 36" to 56"
5600-B4666
Base - Expandable from 46" to 66"
5600-FE
Reversible Fabricated Elbow
5600-M1824
18" / 24" Offset Mast Arm Only
5600-M3036
30" / 36" Offset Mast Arm Only
5600-M4248
42" / 48" Offset Mast Arm Only (not for use w/ SRLs)
5600-MEP1824
18" / 24" Offset Mast, Elbow, Center Post
5600-MEP3036
5600-MEP4248
5600-P60WB
60" Center Post Tube with a 3" Outer Diameter
ROPELOK ROPE GRABS
™
Ropelok Rope Grab
Features
®
Portable, Lightweight Rope Grab Device for Vertical Lifelines
RTC® offers a selection of rope grabs and lanyards ideal for vertical rope
systems. These are easy to add or remove from rope lifelines used for tower
or scaffold work. Our roofing rope grabs are available either as self-trailing
or manually operated products. Rope grabs roll freely, but lock instantly
should a worker fall. Rope grabs are designed to be used with RTC®
approved safety rope or with RTC® Permacable®.
Ropelok Rope Grabs
®
For use with 5/8" diameter polyester rope and/or weather-resistant Permacable®
2300-9111
Vertical Lifeline Rope Grab w/ Carabiner for Fixed Ladder System
2300-OP3E
Vertical Lifeline Rope Grab w/ 2' Shock-Absorbing Lanyard
2300-OP3E3
Vertical Lifeline Rope Grab w/ 3' Shock- Absorbing Lanyard
2300-RPLK
Vertical Ropelok Device
2300-WEIGHT 3 lb. Rope Weight
2500-OP3E3
Roofing Rope Grab w/ 3' Shock-Absorbing Lanyard
2500-WEIGHT 2 lb. Rope Weight
®
Ropelok Rope Lifeline Systems
®
2300-RPKL025
25' Self-trailing Ropelok Vertical System. Includes: Self-Trailing
Ropelok Device with a 2' Shock-Absorbing Lanyard, 25 ft. of 5/8"
Diameter Polyester Rope, a Quick Attach Full-Body Harness,
a 36" x 4" Choker Anchor Sling & a D-bolt Assembly all in a Bucket
50' Self-trailing Ropelok Vertical System. Includes: Self-Trailing
Ropelok Device with a 2' Shock-Absorbing Lanyard, 50 ft. of 5/8"
®
®
Kits — Posts & Base – Aluminum
5600-DAB1
Davit Arm (18" / 24" offset) & Adjustable Base (36" / 56")
5600-DAB2
Davit Arm (18" / 24" offset) & Adjustable Base (46" / 66")
2300-RPKL050
®
®
Mountings — All components are steel unless otherwise noted
5600-FM
Floor Mount
5600-FMSS
Floor Mount - Stainless Steel
5600-FMC
Floor Mount
5600-FMCSS
Floor Mount - Center stainless steel
5600-CMO
Corner mount - Outside
5600-CMI
Corner mount - inside
5600-WM
Wall mount
5600-WMSS
Wall mount - Stainless Steel
5600-FMF1
Floor mount - Flush
5600-FMF1SS
Floor mount - Flush - Stainless Steel
5600-FMF2
Floor mount - Flush
5600-FMF2SS
Floor mount - Flush - Stainless Steel
5600-WMP
Wall mount - Portable
5600-CC
Cylinder Core
5600-CCSS
Cylinder Core - Stainless Steel
5600-SC
Sleeve Cap
5600-SCSS
Sleeve Cap - Stainless Steel
5600-SCABS
Sleeve Cap - ABS Plastic
5600-VHMB
Vehicle Hitch Mount Base for 2" x 2" Receiver
2756 Series Extricator II
®
Mounting Brackets for Davit Posts
2756-GBRACKT4 2756 Mounting Bracket Assembly for 50' Units
2756-GBRACKT5 2756 Mounting Bracket Assembly for 25' Units
2756-GBRACKT6 2756 Mounting Bracket Assembly for 80'+ Units
PAGE 90
l
Ropelok II Rope Grabs
®
For use with 5/8" diameter polyester rope and/or weather-resistant Permacable®
3350-9111
Self-trailing Rope Grab w/ Carabiner and 2" Ring
3350-OP3E3
Self-trailing Rope Grab w/ 3' Shock-Absorbing Lanyard
3350-RPLKL
Self-trailing Ropelok® II device w/ large 2" attachment ring for
vertical lifelines
• Portable & Lightweight
• Hands-free operation
or manual
• Removes from rope
in seconds
• Instant locking
• Easy cleaning, inspection
and maintenance
polyester rope
• Three strand polyester
rope lifeline allows
inspection of
inner fibers
• Lifelines available up
to 330 ft. long
• Spliced eye in lifeline
makes installation
easy and secure
• Rope weight keeps
lifeline taut
• Separate serial number
for each rope grab
for tracking and
record keeping
• Meets OSHA 1926
subpart M, 1910.66
Z359.1 Standards
Ropelok II Rope Lifeline Systems
®
3350-RPLK025
25' Self-trailing Ropelok II Vertical System. Includes: Self-Trailing
Ropelok II Device with a 3' Shock-Absorbing Lanyard, 25 ft. of 5/8"
3350-RPLK050 50' Self-trailing Ropelok II Vertical System. Includes: Self-Trailing
®
®
®
®
®
®
®
®
PAGE 91
1.800.323.7402
l
vertical Rope Features
• Portable & Lightweight
polyester rope
rope lifeline allows
inspection of inner fibers
• Lifelines available up
to 330 ft. long
• Spliced eye in lifeline makes
installation easy and secure
• Rope weight keeps
lifeline taut
vERTICAL ROPE LIFELINES
Rope Lifelines with Spliced Eyes
5/8" Polyester Rope. Includes spliced eye for upper
connection. Carabiners sold separately. Contact RTC®
for availability of custom length lifelines
9450-PSE58010
10' Rope Lifeline w/ Spliced Eye
9450-PSE58015
9450-PSE58020
9450-PSE58025
9450-PSE58030
9450-PSE58035
9450-PSE58040
9450-PSE58045
9450-PSE58050
9450-PSE58055
9450-PSE58060
9450-PSE58065
9450-PSE58070
9450-PSE58075
9450-PSE58080
9450-PSE58085
9450-PSE58090
9450-PSE58095
9450-PSE58100
9450-PSE58130
9450-PSE58150
9450-PSE58180
9450-PSE58200
9450-PSE58220
9450-PSE58250
9450-PSE58330
Rope Lifelines Double Locking Snaphooks
5/8" Polyester Rope Lifelines w/ Splices as indicated.
Contact RTC® for availability of custom length LIfelines
9450-PRHH025
25' x 5/8" Poly Rope
9450-PRHH100
100' x 5/8" Poly Rope
9450-PSE58100H 100' Polyester Rope Lifeline
w/ 1 Double Locking Snaphook
& 1 Spliced Eye
9450-PSH58025
25' Polyester Rope Lifeline
9450-PSH58050
9450-PSH58100
PAGE 92
l
2001 SERIES
™
CABLEGRAB
The 2001 Series CableGrab™ is a hands-free unit that
travels with the user and is ready to provide fall
arrest at an instant. It is ideal for ladder climbing,
telecommunication towers, water towers, billboards
and similar structures. The unit can be used with the
RTC® ladder climbing system, which includes
galvanized cable, termination hardware, ladder
brackets, rung clamps and cable guides.
™
2001 Series CableGrab Systems
2001 Series CableGrab . Available with 3/8" – 7' x 19' galvanized steel cable
(stainless steel also available) Systems include cable, turnbuckle, clamp thimble,
shackle and 2 cable clips. Cable grab unit and ladder brackets sold separately.
2001-9111
CableGrab™ Unit w/ Carabiner for Ladder Climbing Use
2001-OP3E3
CableGrab™ Unit w/ 3' Shock Absorbing Lanyard for Vertical
Lifeline Use
2001-GC38020
20' Cable Lifeline System
2001-GC38030
2001-GC38040
2001-GC38050
2001-GC38060
2001-GC38070
2001-GC38080
2001-GC38090
2001-GC38100
2001-GC38110
2001-GC38120
2001-GC38130
2001-GC38140
2001-GC38150
2001-GC38160
2001-GC38170
2001-GC38180
2001-GC38190
2001-GC38200
2001-GC38210
2001-GC38220
2001-GC38230
2001-GC38240
2001-GC38250
2001-SC38050
50' Stainless Steel Cable Lifeline System
™
™
2001 Series CableGrab
Features
• Locks in an instant in the
event of a free-fall
• Easy installation
• 3/8" galvanized or stainless
steel cable available
• Hands-free operation, does
not interfere with climbing
• Portable and lightweight
• Release pins allow for quick
attachment to safety cable
• Will not ride to the ground
from a “panic grip"
• CableGrab™ can be
removed for end of day
storage or relocation to
another safety cable
• Can be used with front or
side D-ring harnesses
• Ladder extensions available
• Can be used with galvanized
or stainless steel cable
All RTC® Steel Cable
Ladder Safety Systems
are custom designed.
Call RTC® Customer
Service at
800.323.7402 to
receive a quote for
your ladder system.
1.800.323.7402
Ladder Brackets & Guides
One rung clamp required for every cable guide, 2 rung clamps required for
every ladder bracket or ladder extension.
2500-BRACK
304 Ladder Bracket
2500-BRACK316 316 Ladder Bracket
2500-BRACKE
304 Ladder Extension
(Please note when ordering: order an additional 10' of cable)
2500-BRACKE316 316 Ladder Extension
2500-GUIDE
3/8" Galvanized or Steel Cable Guide
2500-GUIDE58
5/8" Permacable Cable Guide
®
PAGE 93
1.800.323.7402
l
Climb-Rite Fixed Rail
System Features
®
• Hands-free movement up
and down ladder
• Rail system is easy to
install and maintain
• Climbing device weighs
only 2 lbs.
• Arresting unit is easily
installed and removed
from rail
• Type 316 stainless steel
rail is available for marine
or other corrosive
environments
• All ladder hardware is
corrosion resistant
stainless steel
• Can be mounted to side or
center of ladder
• Ladder extensions
are available
• Systems used on U.S.
Navy vessels
• Meets the OSHA 1926
subpart M, 1910.66
Z359.1 Standards
CLIMB-RITE FIXED RAIL
LADDER SAFETY SYSTEMS
®
The Climb-Rite is a fixed flat rail
climbing protection system, that
uses a detachable sliding sleeve
that rolls freely, both up and down
RTC® rail (1/4" x 2"). Though
primarily designed for climbing
protection on vertical fixed
ladders, it can also be used above
and below ground on interior or
exterior surfaces. It is designed to
lock the instant a fall begins,
bringing the four hardened steel
brakes into contact with the rail.
The complete climbing system has
been designed without rail
notches or serrations that corrode
and rust. Rail system extensions are
available for safe ladder access
and egress.
®
Climb-Rite Systems
®
Rail 2000 Series Climb-Rite® Lightweight Climbing Device
2000-DEV
Climb-Rite w/ Double Locking Snaphook
®
9200 Series Rail 1/4" x 2" x 10’ Sections
9200-AR
10' Aluminum T-Shaped Rail
9200-SR
10' Stainless Steel Rail - Type 304
9200-SR316 10' Stainless Steel Rail - Type 316
Ladder Safety Systems Accessories
1 Rung Clamp required for every 4' section of Rail, 1 Splice required for each Rail Connection
2 Rung Clamps required with each Extension *9200-SLEF and 9200-SLEREM are available in
316 stainless steel
9200-ALEREM
9200-ERLSTP
9200-PIN1
9200-PIN2
9200-RLSTP
9200-SLEF
9200-SLEF316
9200-SLERE
9200-SLERE316
9200-SLEREM
9200-SLEREM316
9200-SRC0750R
9200-SRC0750S
9200-SRC0875R
9200-SRC0875S
9200-SRC1000D
9200-SRC1000R
9200-SRC1000S
9200-SRC1250R
9200-SRC1250S
9200-SRC1312R
9200-SRC1312S
9200-SRC1500R
9200-SRC1500S
9200-SRC1625R
9200-SRC1750R
9200-SRC1750S
9200-SSPL
9200-SVL
9200-URC
9200-URC1
9200-URCL1
9200-URCL2
9200-URCLEXT1
9200-URCLEXT1
Removable Aluminum Extension Kit
Permanent Rail Stop/Climb-Rite® w/ Extension
Trolley Parking Pin for Stainless Steel Rail
Trolley Parking Pin for Aluminum Rail
Permanent Rail Stop for Climb-Rite® Rail System
Permanent 304 Stainless Steel Extension
Permanent 316 Stainless Steel Extension
Removable 304 Stainless Steel Ladder Extension
Removable 316 Stainless Steel Ladder Extension
Removable 304 Stainless Steel Ladder Extension Kit
Removable 316 Stainless Steel Ladder Extension Kit
3/4" Diameter Stainless Steel Round Rung Clamp
3/4" Diameter Stainless Steel Square Rung Clamp
7/8" Diameter Stainless Steel Round Rung Clamp
7/8" Diameter Stainless Steel Square Rung Clamp
1" Diameter Stainless Steel Diamond Shaped Rung Clamp
1" Diameter Stainless Steel Round Rung Clamp
1" Diameter Stainless Steel Square Rung Clamp
1 1/4" Diameter Stainless Steel Round Rung Clamp
1 1/4" Diameter Stainless Steel Square Rung Clamp
Stainless Steel Rail Splice (Type 316)
SkySwivel® Extension Rotation Device
Universal Stainless Steel Rung Clamp - 1" off set
Universal Stainless Steel Rung Clamp - 1 1/2" off set
Universal Rung Clamp for L-rungs Mounted to Face
Universal Rung Clamp for L-rungs 1 1/2" off set each
Extension Clamp for L-rungs
Extension Clamp for L-rungs
All RTC® Climb-Rite®
Safety Systems are
custom designed. Visit
fallprotection.com to
see a worksheet to plan
your system and call
RTC® Customer Service
at 800.323.7402 to
receive a quote for your
ladder system.
PAGE 94
l
PAGE 95
1.800.323.7402
l
®
Beamwalker
Temporary Lifeline
System Features
• Low anchorage forces
• High strength, chemical
resistant polyester rope
lifeline
• Quick set-up and
disassembly
• Continuous protection
• Spans up to 150 feet for
one or two workers
• Extremely lightweight,
one piece system
rope allows easy
inspection of inner fibers
• Ropevise™ makes
tensioning easy
• One system can be used
for many different spans
• Many anchorage
connectors are available
for use with the
Beamwalker
• Available separately or in
kit form
• Meets OSHA 1926
subpart M, 1910.66
Z359.1 Standards
®
BEAMWALKER TEMPORARY
LIFELINE SYSTEM
®
RAILWALKER HORIZONTAL
LIFELINE SYSTEM
®
®
Railwalker Horizontal
Lifeline System Features
• Excellent with limited
clearance
• Trolley slides along easily
• Unique spring-loaded end
stops provide method to
remove the trolley
• Rail is pre-drilled for easy
installation
The 9900 Railwalker® is a permanent rail system used on ledges,
runways, walls or the sides of structures.
Available in stainless steel or
®
aluminum rail, the 9900 Railwalker is ideal for areas with limited
clearance. The system can accommodate several workers while
maintaining a proper distance. The trolley slides easily along the
rail. The rail should be installed at a height between 4' and 15' from
the walking/ working surface. Useful in tank loading, overhead
crane runways and window cleaning.
The 9450 Beamwalker® System is a temporary, polyester rope horizontal
lifeline system. It is easily installed with a wrench, either at D-ring height
or directly overhead. Horizontal installations have a maximum length
between anchorage points of 150 feet for use by up to two people at
a time. The system can be installed between vertical columns or used
with other RTC® horizontal lifeline post systems and is ideal for electrical,
built-up-scaffolding, tanks, vessels and catwalks.
®
Beamwalker Lifeline System includes: spliced 5/8" polyester rope lifeline, Ropevise rope
tensioner, (2) 2" diameter forged steel O-rings, and (2) 9111 Carabiners. For 1 or 2 workers
& sold completely assembled. Kits feature drawstring bags or buckets.
®
®
®
®
• Aluminum rail also available
• Can be used with RTC® shockabsorbing lanyards or RTC®
2008 series self-retracting
lanyards
Railwalker® Permanent Rail System
9900-DEV
Railwalker Trolley (Lanyard not included)
9900-DEVSC3 Railwalker Trolley w Stainless Steel Cable Restraint Lanyard
9900-P3E
Railwalker Trolley w/ 3' Shock Absorbing Lanyard
Railwalker® Rail & Rail Components
1/4" x 2" x 10’ Sections / 1 Connector required every 4’ / 1 Splice required for
each rail section connection / 2 End stops required for each system
9900-APSTP Permanent Stainless Steel Rail Stop (for stainless steel rail only)
9900-SSTP
Spring Loaded Stainless Steel Rail Stop
9900-SSPL
Stainless Steel Rail Splice (Type 316)
®
™
Anchorage Slings Not Included
9450-BW10
10' Beamwalker Horizontal Lifeline
9450-BW20
9450-BW30
9450-BW40
9450-BW50
9450-BW60
9450-BW70
9450-BW75
9450-BW80
9450-BW90
9450-BW100 100' Beamwalker Horizontal Lifeline
• Type 316 stainless steel rail is
available for marine or other
corrosive environments
Railwalker® Permanent Lifeline System
Beamwalker Temporary Lifeline Systems
®
• Stainless steel rail
accommodates a bend radius
as small as 4 ft.
®
Z359.1 Standards
®
All RTC® Railwalker®
Horizontal Lifeline
Systems are custom
engineered. Please call
RTC® Customer Service at
1.800.323.7402 to receive
a quote for your system.
®
®
®
®
®
®
T-LINE TWIN LIFELINE SYSTEM
®
T-Line Twin Lifeline System
Features
• Innovative design with 2
lifelines on separate spools
®
®
• Self-Retracting, Self-Locking
®
®
• Quick and easy installation
®
• Horizontal span up to 40'
Includes two (2) Anchor Slings
9450-BW030BG 30' Beamwalker Kit in Tote Bag
9450-BW030BK 30' Beamwalker Kit in Plastic Bucket
9450-BW100BK 100' Beamwalker kit in Plastic Bucket
®
®
®
®
®
The T-Line Safety System is the ultimate in fall protection. It provides safe,
hands-free movement along platforms and walkways; safe climbing for
access and egress; short activation distance (hold without sliding or swinging)
and a safe simple continuous protection integrated rescue switch.
®
®
®
PAGE 96
l
®
1.800.323.7402
T-Line Safety System
2757-TLINE
• No tensioning or adjusting
required
• Suitable for permanent or
temporary installations
• Meets ANSI Z359.1 (SRL)
requirements
T-Line Safety System 20'–40'
PAGE 97
l
Great Applications for
Permacable®
• Railcars...
Most railcar applications are
outdoors and usually require
anchorage supports.
Because Permacable® can
span long lengths of rail
track with fewer supports,
the customer has a
substantial savings in steel
and concrete. RTC® Fall
Protection offers several
options for inverted L's to
create a support structure
and can also create
custom fabrications.
• Bridge Cranes...
Permacable® is also a good
fit for many bridge cranes.
The long runways of these
cranes and substantial
clearances make Permacable®
the right solution.
• General industry...
Permacable® stands up to
tough work environments.
The cable is non-corrosive
and the hardware withstands
years of use in extreme
environments. Sealed
bearings and a large pulley
diameter allow easy rolling
along the cable even in
dusty, dirty or gritty
conditions. Low end-anchor
forces make installation to
existing structures much
less costly than with the
alternative solutions.
For complete system quotes,
including appropriate harnesses,
lanyards or self-retracting
lifelines, call RTC® Customer
Service at 800.323.7402. Please
note, exact length of each system
and clearance below the work
area is required and each system
must be approved by RTC®
Engineering BEFORE ordering.
RTC CUSTOM ENGINEERED SOLUTIONS
®
PERMACABLE® SYSTEMS
The Lightweight Shock-Absorbing Horizontal Lifeline
From Start To Finish, Rtc Custom Solutions Can Help!...
The protection industry could be described in a single word—reliance. Without
reliability, any fall protection system you purchase jeopardizes the safety of your
employees. The same goes for the installation of a fall protection system. RTC® Fall
Protection not only manufactures fall protection and arrest systems, we offer an inhouse, multi-tiered engineering process. Implementing a fall protection may seem like
a daunting process, with our Custom Engineered Solutions program, the set-up and
design is relatively simple. Trust us with the development of your custom fall protection
system or horizontal lifeline and you will receive the best solution possible.
• Research and Input Many custom systems can be developed with remote
assistance through conferencing, digital photos and drawings.
• Design After providing an estimate of time and cost considerations, we create
fall protection or arrest systems that directly address your needs.
• Engineering All of our fall protection systems are designed and reviewed by our
engineering staff.
• Fabrication RTC® We are a leading manufacturer in fall protection components.
• Installation RTC® We offer installation across the country with trained professionals.
• Testing/Inspection Every fall protection system is reviewed before and after
fabrication to insure compliance with the applicable standards and quality.
• Certification Our Custom Solutions™ staff will approve and certify the system for
use after a positive inspection.
• Training One of the biggest benefits of our Custom Solutions™ program is the
training of your company's employees.
• Rigid system prevents long
fall distances
• Combines Sellstrom/RTC®
state-of-the-art fall
protection technology with
advanced overhead material
handling technology
• Anchorage point moves
effortlessly forward,
backward and sideways
• Overhead anchorage
reduces the potential of
injury due to swing
• Enclosed rail design inhibits
contamination of trolleys
normally associated with
exposed beams
• Available in free-standing
models or ceiling mounted
• SkyAnchor monorail available
• Multiple workers can use the
same system
• Meets OSHA 1926.500,
1910.66, ANSI Z359.1 and
A10.14 Standards
The Workstation Fall Protection That Moves With The Worker...
The SkyAnchor provides true rigid 3-D rail movement and 100% fall
protection. It reduces the danger of a swinging collision, because the
anchorage point follows overhead. The beam design provides a rail
system with no sag and is ideal for all types of elevated work stations.
The SkyAnchor is available in crane, truss and floor mount.
SKY ANCHOR™ II SYSTEMS
SkyAnchor II Systems Are Used Both Indoors And Outdoors...
SkyAnchor II system's fixed rail track can be designed for truck
unloading/maintenance and for fall protection in manufacturing
plants or warehouses. Systems can be mounted on existing building
structures, or joined with specially designed "Inverted L" or "T"
supports. Rigid rail systems can support up to 2 workers per track.
Why Permacable?... The light weight of Permacable makes it ideal for
applications where limited intermediate supports are available. Each system
includes 5/8" diameter synthetic cable, termination hardware and snatchblock pulley. Kits are designed for up to 4 users per line and range from 30' up
to 400' in length.
Lightweight, weighing only a fraction of steel cable, Permacable also features
excellent resistance to weather and chemicals and is easy to install.
Permacable meets all OSHA requirements for horizontal lifelines. A special red
liner in the cable alerts the user to wear or damage. Engineered anchorage
design load and clearance charts are provided with each system.
l
SkyAnchor™ Features
™
SKY ANCHOR™ SYSTEMS
Permacable provides access where fall hazards exist and worker mobility is
needed. Custom engineered to save money these low stretch, synthetic
cables offer safety, both vertically and horizontally.
PAGE 98
®
SkyAnchor™ II Features
• Track style options are
plain, trussed and dual
trussed tracks
• Steel or Aluminum with
"fold-away" track available
• Little or no maintenance
• Meets OSHA 1926.500,
1910.66 and ANSI Z359.1
Standards
PAGE 99
1.800.323.7402
l

2015 Product Catalog

Transcription

Similar documents

633p welding helmet skull caps

Digital Elite™ Series

welding helmet

Spec Sheet - N-Vision Optics PVS-7

Models - OSC-S, PW - Stinger Production Equipment

Smilacina racemosa

digital auto darkening welding helmet

2010 Student Starter Pack Holiday Flier

JOB DESCRIPTION: INSIDE SALES REPRESENTATIVE