LP4 Integrative Laser Pointer

LP4 Integrative Laser
Pointer
User Manual
Model LP4
Integrative
Laser Pointer
Thank you for purchasing the
Califone LP4 Integrative Laser Pointer.
Instructions
It’s a versatile tool for use with PowerPoint presentations.
It enables you to walk around the room and still control the
presentation.
The LP4 includes a transmitter and USB receiver. The
receiver nests into the transmitter when not in use.
Features:
1. Storage: The transmitter and receiver are integrated into one unit
2. Control the pace of your presentation
The advanced radio frequency (RF) technology works through walls up to 30-feet away, so you never have to stand next to your computer to control the presentation
3. Multifunctional presenter
It combines the functions of a laser pointer and hotkeys.
4. Easy to use
The LP4 is plug-and-play. No driver is required. Just
plug the receiver into the USB port on a PC and it
works within seconds.
I. Operating System
Windows 2000 and above, Windows XP, Vista, Win 7, Win 8
II. Operating Tips
1. For optimal performance and RF reception, place the receiver at least 6” away from all electrical devices, including monitors, speakers or external storage devices.
2. If battery level is low, the control distance will be lessened. If the control distance decreases from the transmitter, replace the battery.
3. The presenter will enter into sleep mode if there is no operation in 10 minutes. It will wake up if the laser
key is pressed.
III. Functions:
USB
Functions Instruction:
Power switch
Power on or power off
——————————————————————————————
Power Indicator Turn on the power switch, the light above
light the switch will be on; If entering into the sleep mode or turning off the power switch, the light will go out
——————————————————————————————
Laser Indicator The laser indicator light will be on if you
light press the upper part of presenter. Release your hand, the light will be off.
——————————————————————————————
Page Up
The point (A position) is remote center. Slide from right of the point to left of the point.
——————————————————————————————
Page Down
Slide from left of the point to right of the point.
——————————————————————————————
Play/Esc
Play PowerPoint: Slide from upper of the point to lower of the point,
Esc: Repeat above operation
(For PowerPoint only)
——————————————————————————————
Blank screen
Slide from lower of the point to upper of
the point (For PowerPoint play only)
——————————————————————————————
Laser
Press the upper part of presenter to emit laser beam
——————————————————————————————
Laser hole
Emit laser beam
Receiver
User can choose the receiver to have SD card reader function. (optional)
IV. Battery installation
• The product is powered by 1x AAA battery.
• Open the battery cover, and insert 1x AAA battery into
the battery holder.
• Battery negative(-) is left and positive (+) is right as below
• Put the battery cover back into position.
Note
1. Do not insert battery into the device in the wrong direction.
2. Do not leave bad or exhausted battery in the device
3. If you do not use the device for a long period of time, remove the battery to avoid possible damage from battery corrosion.
4. If the device does not function correctly or if the operating range becomes reduced, replace the battery
with new one.
V. Technical parameters
RF Frequency
2.437GHz
——————————————————————————————
RF Output power
0dBm
——————————————————————————————
Sensitivity
-90dBm
——————————————————————————————
Control distance
Up to 10 meters
——————————————————————————————
Laser wavelength
650nm
——————————————————————————————
Laser distance
>200m
——————————————————————————————
Max output
<5mW
——————————————————————————————
Battery
1 x AAA
——————————————————————————————
Working voltage
1.2~1.5V
——————————————————————————————
Sleep current
<100uA
——————————————————————————————
Dimension
124*35*24mm
Receiver
Operation system
Windows 2000 and above, Windows XP, Vista, Win 7, Win 8
——————————————————————————————
Interface
USB1.1 , Compatible with USB2.0
——————————————————————————————
Working voltage
USB electricity supply (4.5~5.5V)
——————————————————————————————
Dimension
36.5*14.6*7MM
VI. Safety Measures
•
•
•
•
•
To avoid possible eye damage, never point the LP4 at people especially their faces, or look directly into the LP4 laser beam.
Avoid pointing the presenter’s laser beam at a mirror or other highly reflective surface.
Keep the presenter away from children.
Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars.
Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards.
Note:
The LP4 uses RF technology. The USB receiver
will identify the first transmitter currently in use.
If you want to use different transmitters with the
same receiver, pull the receiver out and after
waiting six seconds, plug it back in again. Then
press any key on the transmitter and it will then
operate.
Califone® International, Inc.
1145 Arroyo Avenue, #A
San Fernando, CA 91340 USA
Toll Free Phone 800.722.0500
Toll Free Fax 877.402.2248
International Customers call 818.407.2400
or Fax 818.407.2405
califone.com