Stone from Stock - Abbey Artstone Limited

ABBEY ARTSTONE
Stone from Stock
Stock range of architectural masonry products
STONE FROM STOCK
Stock range of architectural masonry products
Based in Keighley, West Yorkshire Abbey Artstone Limited provides the highest quality architectural masonry products.
We supply contracts throughout the UK from large residential and commercial developments to small extension or garden
walls. Whatever your needs Abbey Artstone has the experience to supply.
Abbey Artstone provides four main product types. Semi dry cast stone products,Wetcast reinforced stone products.
Glass Reinforced Cement (GRC) and Glass Reinforced Plastic (GRP). From these four base materials we can provide
a wide range of masonry products to suit your needs.
Semi Dry is perhaps the most commonly used cast stone in the house building industry as a cost effective alternative to
natural stone. It is a versatile product used for many applications which includes (but is not limited to) window surrounds,
copings and pier caps, ballustrade, bulls eye windows, quoins, corbels, ashlar blocks, vents, datestones,keystones
and much more.
TECHNICAL DATA
01
CILLS & BAY CILLS
02
HEADS & KEYSTONES
03
ASHLAR, QUOINS, PLINTH & STRING
04
COPINGS, CORBELS, CAPS & MORE
05
TECHNICAL DATA
COMPOSITION
DENSITY
Stone From Stock architectural masonry ashlar blocks and quoins are manufactured
in accordance with BS6073 parts 1 & 2:1981 in two part or homogenous semi dry
or wet cast mix. Using natural occurring aggregates,sand, Portland cement and
an integral waterproofer, pigments are added where necessary.
The typical average density of stone from stock architectural masonry
is 2150kg/m3
COMPRESSIVE STRENGTH
Cast Stone Dressings
When tested in accordance with BS1881:Part 116: 1983 and BS1217:1997 and
the United Kingdom cast Stone Association, the cast stone was tested over three
150mm cubes giving an average crushing strength well in excess of 25KN/mm2.
Ashlar Blocks And Quoins
When tested in accordance with BS1881:Part 116: 1983 and BS6073: parts
1 & 2:1981, the cast stone was tested over ten samples of blocks at a size of
440x215x100mm giving an average strength in excess of 10KN/mm2.
DRY SHRINKAGE
The average dry shrinkage of three specimens sampled and tested in
accordance with BS6073:Part 1 was as follows:
Face Mix
<0.04%
Backing Mix <0.06%
WEATHERING
Many factors influence the way cast stone weathers, such as design, exposure,
climate and surrounding. All pigments used are colourfast and durable and
conform to BS1014. Stone From Stock architectural dressings will weather in a
similar manner to natural stone, when exposed to similar conditions.
STRUCTURAL USE
CEMENTITIOUS EFFLORESCENCE
All cast stone heads and cills are decorative and are not
designed to be load bearing. Load bearing products can be
manufactured in a wet cast method of manufacture and
are available to order only.
As with all reconstructed stone and cement based products there is the possibility
that the temporary phenomenon known as efflorescence will occur causing
lightening of colour. This will reduce over a period of time with natural weathering.
Quoins, Plinths and String Courses can be used in
load bearing situations when used in compression.
HEALTH, SAFETY & WELFARE
The contractor shall ensure that health, safety and welfare measures
required or by virtue of the provision of any enactment or
regulation or the working rules of the industry are
complied with.
All units are reinforced where necessary with
handling reinforcement.
GABLE VENT
BULLSEYE FEATURE
CORBEL
HEAD WITH KEYSTONE
QUOINS
WINDOW CILL
SURROUND
WITH MULLIONS
SPHERE CAPS
ASHLAR PIER
PLINTH
BAY WINDOW
DOOR SURROUND
(see our other brochures)
PIER CAPS
WALL COPINGS
COLOURS
Portland
Grey
Bath
Calder (M03), Buff
This is the STOCK colour
01
TECHNICAL DATA
The colours shown are indicative and
colour samples should be requested for
a true representation of the products colour
McDonald Red
M08
The colours above are available to order only
CILLS & BAY CILLS
140
SLIP CILL, Length
STOOLED CILL, Length
590mm
688mm
895mm
830mm
1180mm
1115mm
OPENING
1400mm
length of slip cill is 20mm less
than the window opening to
allow for joints.
LENGTH
100
100
140
150
LENGTH
STOOLED CILL (handed), Length
150
588mm (Left or Right)
730mm (Left or Right)
90 DEGREE BAY CILL
Units featured in this bay are;
599mm, 945mm, 945mm RH
LENGTH
Square bays can be made using both
140
945
LENGTH
Left and Right hand corner units.
LO
NG
945
150
711 LONG LH
93
3L
ON
All the units shown on the bay windows
can be cut to suit a non standard bay window
size or used in conjuction with a slip cill
to suit a larger bay window size.
G
NG
O
9L
LO
NG
RH
59
1860
BRICKWORK
720
BRICKWORK
LH
93
3L
ON
G
135 DEGREE BAY CILL
RH
711 LONG RH
Units featured in this bay are;
711mm (RH + LH) Stooled
933mm (RH + LH) Corner
1839
BRICKWORK
714
BRICKWORK
CILLS & BAY CILLS
02
HEADS & KEYSTONES
THREE COURSE HEAD, Length
215
688mm
830mm
KEYSTONE
1115mm
1400mm
LENGTH
PLAIN HEAD
100
TWO COURSE HEAD, Length
688mm
830mm
1115mm
140
1400mm
LENGTH
100
165
265
165
PLAIN KEYSTONE
To suit 140mm
215
265
To suit 140mm
215
two course plain head
150
165
PLAIN KEYSTONE
To suit 215mm
CHAMFERED KEYSTONE
two course plain head
305
150
165
CHAMFERED KEYSTONE
290
To suit 215mm
three course plain head
290
three course plain head
150
150
03
HEADS & KEYSTONES
305
ASHLAR, QUOINS, PLINTH & STRING
ASHLAR BLOCK
215
215
135 DEGREE QUOIN
available with faced ends
to suit door openings
440
440
100
215
90 DEGREE QUOIN
215
CHAMFERED QUOIN
25x25mm chamfer to
QUOIN
328
all edges.
215
215
PLAIN ASHLAR
353
240
CHAMFERED PLINTH
890
90 DEGREE EXTERNAL
CHAMFERED PLINTH
140
50x50mm chamfer
265
140
265
135 DEGREE EXTERNAL
315
236
256
315
90 DEGREE INTERNAL
236
256
135 DEGREE INTERNAL
ASHLAR, QUOINS, PLINTH & STRING
04
COPINGS, CORBELS, CAPS & MORE
COPING
Ideal for a 215mm
75
COPING CORNER
wide wall
Left Hand shown opposite
600
also available.
300
600
COPING END
300
558
600
215
NARROW CORBEL
300
100
DATESTONE
328
100
558
Specify lettering
when ordering
215
290
WIDE CORBEL
Left Hand shown opposite
also available.
440
328
215
590
GABLE VENT
100
PIER CAP, Length
450mm
525mm
328
LENGTH
05
LENGTH
100
LENGTH
SPHERE CAP, Length
SPHERE , Diameter
450mm
225mm
300mm
525mm
375mm
400mm
COPINGS, CORBELS, CAPS & MORE
LENGTH
ABBEY ARTSTONE
Worth Valley Works, Pitt Street, Keighley, West Yorkshire, BD21 4PF
Tel. 01535 610964
Fax. 01535 690989
Email. [email protected]
Semi Dry | Wet Cast | Glass Reinforced Concrete | Glass Reinforced Plastic
Company Registration Number : 7529533