drill chucks

Transcription

drill chucks
DRILL CHUCKS
2015/2016
We work for customers
who have a weakness
for our strengths.
Companies intent on making a difference are obliged to develop constantly as well as deploy
their strengths to the benefit of customers. At RÖHM, we have set ourselves high targets and
are doing our very best to achieve them. This is why we support our customers all over the world
by means of the six performance indicators so typical of RÖHM:
Dynamism
Variety
Security
Partnership
Globality
Innovation
Table of contents
DRILL CHUCKS
Quick-action drill chucks industry
SPIRO-I
SUPRA-I
SUPRA-S
SUPRA-SK
SUPRA-SK E
1006
1007
1008
1009
1010
Quick-action drill chucks
EXTRA-RV 80
EXTRA-RV 60
EXTRA-RV 40 - Orange Line
1014
1016
1017
Key-type drill chucks
PRIMA-I
PRIMA-S / -M
PRIMA-L - Orange Line
Drill chuck key BFS
1020
1021
1023
1024
Two-jaw tapping chucks
Tapping chuck GSF
1025
Accessories
Taper shank arbor KD
Reducing sleeve RH
Extensions sleeve VLH
Drill and reamer extension BV
1026
1027
1028
1029
Errors and corrections are reserved!
Operation guide
Drill chucks
Operation guide
TYPE
SPIRO-I
SUPRA-I
Mount
SUPRA-SK
SUPRA-SK E
Self clamping, flat jaws
Features
Clamping
capacity
SUPRA-S
0 - 16 mm
0 - 16 mm
0.5 - 16 mm
0.5 - 13 mm
1.5 - 13 mm
B 10/12/
16/18
J6
B 10/12/
16/18
J 0/1/2/6/33
1/2“-20
3/8“-24
B 12/16/18
1/2“-20
3/8“-24
5/8“-16
B 12/16
1/2“-20
3/8“-24
1/2“-20
M
M
M
M
M
1006
1007
1008
1009
1010
For
Concentricity
Clockwise
rotation
For machines
without spindle stop
Radial
locking
Impact
resistant
Socket
Automatic
retightening
Jaw
Page
yes
optional
1002
M
metal
machining centers
corded drills
plastic
stationary drilling
machines
cordless screw
drivers
Operation guide
Drill chucks
Operation guide
E
E
ORANGE LIN
TYPE
EXTRA-RV 80 EXTRA-RV 60 EXTRA-RV 40
Features
ORANGE LIN
PRIMA-I
PRIMA-S / -M
Keyless, radial locking
Clamping
capacity
Mount
PRIMA-L
Key-type
1 - 13 mm
1.5 - 13 mm
1 - 13 mm
0.5 - 26 mm
0.5 - 16 mm
1 - 13 mm
1/2“-20
3/8“-24
SDS plus
Hex
1/2“-20
1/2“-20
3/8“-24
B 12/16/
18/22/24
J 1/2/3/6/33
5/8“-16
B 10/12/16/18
1/2“-20
3/8“-24
5/8“-16
SDS plus
Hex
1/2“-20
3/8“-24
M
M
M
1020
1021
1023
For
Concentricity
Clockwise
rotation
For machines
without spindle stop
Radial
locking
Impact
resistant
M
Socket
M
M
Automatic
retightening
Jaw
Page
1014
1016
1017
hammer
drilling
impact drilling
1/4“ hexagonal mount
roundend
jaws
clockwise / counterclockwise rotation
hammer
drilling
flat jaws
jaws with
carbide inserts
1003
SELF-CLAMPING FLAT JAW QUICK-ACTION DRILL CHUCK
The absolute highlight of the SPIRO and SUPRA drill chucks is the self-automatic reclamping. This function, in
combination with the hardened flat jaws, increases the clamping force proportional to the cutting force during
drilling operation. This prevents the drill from slipping, even at extreme loads.
Video drill chuck
1004
Quick-action drill
chucks industry
QUICK-ACTION DRILL CHUCKS
INDUSTRY
The high concentricity and the hardened flat jaws are the decisive factor for these drill chucks. Without these product features, the drill is not centrically clamped, with the result that the borehole will
become too large. RÖHM drill chucks guarantee precise concentricity of up to 0.05 mm.
ADVANTAGES AT A GLANCE
Increase in the clamping force proportional to the cutting force by the automatic reclamping function
Precise concentricity of up to 0.05 mm due to the proven flat jaw principle
Long lifetime due to large-area clamping chamfer
Metal bodies for extreme
use in industry and trade
Narrow tolerance conical
mount for maximum driving
force and precision
Automatic reclamping function
to increase the clamping force
during drilling operation
Hardened flat jaws for maximum
concentricity and holding force
1005
Drill chucks SPIRO-I
Quick-action drill chucks SPIRO
SPIRO-I
APPLICATION
Especially suitable on machine tools, box column drills and drilling machines.
TYPE
Self-clamping flat jaw drill chuck with metal sleeve.
Industrial design with maximum precision.
CUSTOMER BENEFITS
Highest concentricity of up to 0.05 mm
Increase in the clamping force proportional to the cutting force by the automatic reclamping function
Conical mount for maximum driving force and precision
TECHNICAL FEATURES
-
Strong retaining ring
Functional components made from steel
Hardened and ground
M
A03
SPIRO-I for machine tools, box column drills and drilling machines
Item no.
1006
Size
Type
871003
6
I
Clamping
capacity
mm
0-6,5
871004
6
I
0-6,5
Mount
B 10
Concentricity
deviation
max. mm
0,05
B 12
0,05
External Ø
mm
35
Length
opened
mm
62,5
Length
closed
mm
68,6
315
35
62,5
68,6
310
Weight
g
871008
10
I
0-10
B 12
0,05
43
82,5
90,1
665
871009
10
I
0-10
B 16
0,05
43
82,5
90,1
650
871015
13
I
1-13
J6
0,05
50
94
102,5
980
871012
13
I
1-13
B 16
0,05
50
94
102,5
995
871018
16
I
3-16
J6
0,05
55
96,5
106,8
1255
871016
16
I
3-16
B 16
0,05
55
96,5
106,8
1260
871017
16
I
3-16
B 18
0,05
55
96,5
106,8
1250
Drill chucks SUPRA-I
Quick-action drill chucks SUPRA
SUPRA-I
APPLICATION
Especially suitable on drilling machines and hand-operated drills.
Rapid clamping and releasing of the drilling tools without key.
TYPE
Self-clamping flat jaw drill chuck with metal sleeve.
Industrial design with maximum precision.
CUSTOMER BENEFITS
Highest concentricity of up to 0.12 mm
Increase in the clamping force proportional to the cutting force by by the
automatic reclamping function
Light and quick clamping of tools for maximum user-friendliness
TECHNICAL FEATURES
-
Strong retaining ring
Functional components made from steel
All wear parts are hardened and ground
M
A02
SUPRA-I heavy industrial version for drilling machines and hand-operated drills
Item no.
Size
Type
871020
4
I
Clamping
capacity
mm
0-4
871019
4
I
0-4
Mount
J0
Concentricity
deviation
max. mm
0,12
B10
0,12
External Ø
mm
26
Length
opened
mm
46,5
Length
closed
mm
51,5
130
26
45,5
50,8
137
Weight
g
871025
6
I
0-6,5
3/8“-24
0,2
32
59,5
65,6
301
871024
6
I
0-6,5
J1
0,12
32
59,5
65,6
275
871022
6
I
0-6,5
B10
0,12
32
59,5
65,6
280
871023
6
I
0-6,5
B12
0,12
32
59,5
65,6
250
871033
8
I
0-8
J1
0,12
35,8
67
73,4
390
871034
8
I
0-8
3/8“-24
0,2
35,8
67
73,4
390
871031
8
I
0-8
B10
0,12
35
67
73,5
380
871032
8
I
0-8
B12
0,12
35,8
67
73,4
345
871042
10
I
0-10
J2
0,12
40,2
80,5
87,1
636
871043
10
I
0-10
J33
0,12
40,2
84
90,6
560
871045
10
I
0-10
1/2“-20
0,2
40,2
79,5
86,1
618
871044
10
I
0-10
3/8“-24
0,2
40,2
79,5
86,1
625
871040
10
I
0-10
B12
0,12
40,2
79,5
86,1
578
871041
10
I
0-10
B16
0,12
40,2
82,5
89,1
624
871055
13
I
1-13
1/2“-20
0,2
46
93
101,5
932
871052
13
I
1-13
J2
0,12
46
91
99,5
900
871054
13
I
1-13
J6
0,12
46
94
102,5
870
871051
13
I
1-13
B16
0,12
46
93
101,5
915
871053
13
I
1-13
J33
0,12
46
94
102,5
948
871066
16
I
3-16
J6
0,12
51
96,5
106,8
1120
871064
16
I
3-16
B16
0,12
51
96,5
106,8
1161
871065 1)
16
I
3-16
B18
0,12
51
96,5
106,8
1115
1)
shortened: B18 by 7 mm
1007
Drill chucks SUPRA-S
Quick-action drill chucks SUPRA
SUPRA-S
APPLICATION
Suitable for box column drills and hand-operated drills.
TYPE
Self-clamping flat jaw drill chuck with metal sleeve.
CUSTOMER BENEFITS
Concentricity of up to 0.17 mm
Increase in the clamping force proportional to the cutting force by by the
automatic reclamping function
Easy and quick clamping of tools for maximum user-friendliness
TECHNICAL FEATURES
-
Strong retaining ring
Functional components made from steel
M
A02
SUPRA-S light version mainly for box column drills and hand-operated drills
Item no.
1008
Size
Type
Clamping
capacity mm
Mount
871038
10
S
0,5-10
3/8“-24
Concentricity
deviation
max. mm
0,25
871039
10
S
0,5-10
1/2“-20
0,25
External Ø
mm
35,8
Length
opened
mm
66
Length
closed
mm
73,7
370
35,8
66
73,7
377
Weight
g
871049
13
S
1-13
3/8“-24
0,25
40,2
76,3
83,6
610
871050
13
S
1-13
1/2“-20
0,25
40,2
76,3
83,6
548
871046
13
S
1-13
B12
0,17
40,2
78,8
86,1
593
871047
13
S
1-13
B16
0,17
40,2
82,3
89,6
581
871062
16
S
3-16
1/2“-20
0,25
46
87,5
97,5
880
871063
16
S
3-16
5/8“-16
0,25
46
87,5
97,5
865
871057
16
S
3-16
B16
0,17
46
88,5
98,5
858
871058
16
S
3-16
B18
0,17
46
92
102
875
Drill chucks SUPRASK
Quick-action drill chucks SUPRA-SK
SUPRA-SK
APPLICATION
For hand-operated percussion drills and drills up to 1300 watt with mounting
thread and taper mount.
TYPE
Impact-resistant and self-clamping flat jaw drill chucks with metal sleeve.
Clockwise and counterclockwise rotation with locking mechanism.
CUSTOMER BENEFITS
Concentricity of up to 0.25 mm
No re-clamping in clockwise and counterclockwise rotation by locking
mechanism
Impact-resistant for universal use
TECHNICAL FEATURES
-
Strong retaining ring
Functional components made from steel
Hardened and ground
M
A02
SUPRA-SK for hand-operated percussion drills and drills up to 1300 watt
Item no.
1)
Size
Type
249910
10
S
Clamping
capacity
mm
0,5-10
249925
10
S
0,5-10
Mount
3/8“-24
Concentricity
deviation
max. mm
0,3
1/2“-20
0,3
External Ø
mm
40
Length
opened
mm
66
Length
closed
mm
73,7
428
40
66
73,7
399
Weight
g
305188
10
S
0,5-10
B 12
0,25
40
68
75,7
416
249804
13
S
1-13
1/2“-20
0,3
42,8
74,2
83,3
537
12612181)
13
S
1-13
1/2“-20
0,3
42,8
76
83,3
537
305221
13
S
1-13
B 12
0,25
42,8
77
86,1
575
305203
13
S
1-13
B 16
0,25
42,8
80,2
89,3
585
blister packaging
1009
Drill chucks SUPRASK E
Quick-action drill chucks SUPRA-SK E
SUPRA-SK E
APPLICATION
For hand-operated percussion drills and drills up to 1000 watt and cordless drills
with up to 70 Nm of torque.
TYPE
Impact-resistant and self-clamping flat jaw drill chuck with metal sleeve.
Clockwise and counterclockwise rotation with locking mechanism.
For machines with and without spindle stop.
CUSTOMER BENEFITS
Concentricity of up to 0.35 mm
No re-clamping in clockwise and counterclockwise rotation due to locking
mechanism
Impact-resistant for universal use
TECHNICAL FEATURES
-
Functional components made from steel
Hardened and ground
M
A02
SUPRA-SK E for hand-operated percussion drills and drills up to 1000 watt and cordless drills up to 70 Nm of torque
Item no.
1)
1010
Size
1193004
13
E
Clamping
capacity
mm
1,5-13
1193005
13
E
1,5-13
1/2“-20
12612191)
13
E
1,5-13
1/2“-20
12612201)
13
E
1,5-13
1/2“-20
blister packaging
Type
Mount
1/2“-20
Retaining
ring
Concentricity External Ø
deviation
mm
max. mm
0,35
42,9
Length
opened
mm
72,0
Length
closed
mm
79,3
Ɣ
0,35
42,5
72,0
79,3
375
0,35
42,9
72
79,3
402
0,35
42,5
72
79,3
390
Ɣ
Weight
g
375
Notes
Notes
1011
MAXIMUM USER-FRIENDLINESS
The EXTRA-RV drill chucks impress with their user-friendliness. The drill chuck is clamped and locked with a single manual operation. The radial locking device prevents the unintentional release of the drill bit during clockwise
and counterclockwise rotation and makes percussion drilling possible. Thus, these quick-action drill chucks are
predestined for use on hand-operated drills.
Video drill chuck
1012
Quick-action drill
chucks
QUICK-ACTION DRILL CHUCKS
Due to the weight-reduced design as well as the easy handling, the RÖHM EXTRA-RV drill chucks
are optimally suited for use on hand-operated drills. In addition, the drill chucks are impact-resistant
and can therefore be used universally.
ADVANTAGES AT A GLANCE
Easy clamping and locking with one manual operation for maximum user-friendliness
No reclamping in clockwise or counterclockwise rotation due to radial locking
Impact-resistant for universal use
Compact and weight-reduced
design for optimal use on handoperated drills
Radial locking to prevent reclamping
in clockwise and counterclockwise
rotation
Freely rotating sleeve
to prevent damage
Carbide clamping jaws
for maximum torque
1013
Drill Chucks
EXTRA-RV
Quick-action drill chucks EXTRA
EXTRA-RV 80
APPLICATION
For corded and cordless drills with and without spindle stop up to a maximum
torque of 100 Nm and up to 1500 watt.
TYPE
Impact-resistant quick-action drill chuck with radial locking and plastic or metal
sleeve.
Available in two and single sleeve design for machines with and without spindle
stop.
With through-hole for clockwise and counterclockwise rotation.
CUSTOMER BENEFITS
Easy clamping and locking with one manual operation for maximum userfriendliness
No re-clamping in clockwise and counterclockwise rotation due to radial
locking
Impact-resistant for universal use
TECHNICAL FEATURES
-
With carbide inserts in the clamping jaws (size 13)
M
A01
EXTRA-RV 80 with radial locking, metal design
Item no.
Size
893351
10
Clamping
capacity
mm
1-10
3/8“-24
metal
Concentricity
deviation
max. mm
0,35
893350
10
1-10
1/2“-20
metal
0,35
1033053
10
1-10
1/2“-20
0,35
42,7
55
60,9
550
13
1,5-13
3/8“-24
Ɣ
Ɣ
metal
1033051
metal
0,4
42,7
64,5
72,4
1100
893352
13
1,5-13
1/2“-20
metal
0,4
42,7
64,5
72,4
1100
802490
13
1,5-13
1/2“-20
Ɣ
metal
0,4
42,7
64,5
72,4
1100
Length
opened
mm
55
Length
closed
mm
60,9
Max.
mach.
capacity
550
55
60,9
550
Mount
Retaining
ring
Design
External Ø
mm
42,7
Length
opened
mm
55
Length
closed
mm
60,9
Max.
mach.
capacity
550
42,7
55
60,9
550
Throughhole
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
A01
EXTRA-RV 80 with radial locking, plastic design
Item no.
1014
Size
767573
10
Clamping
capacity
mm
1-10
664467
10
1-10
3/8“-24
767651
10
1-10
1/2“-20
767639
10
1-10
1/2“-20
767641
13
1,5-13
3/8“-24
767657
13
1,5-13
3/8“-24
767580
13
1,5-13
1/2“-20
767692
13
1,5-13
1/2“-20
Mount
Retaining
ring
Design
plastic
Concentricity External Ø
deviation max. mm
mm
0,35
42,7
Ɣ
plastic
0,35
plastic
0,35
42,7
55
60,9
550
Ɣ
plastic
0,35
42,7
55
60,9
550
plastic
0,4
42,7
64,5
72,4
1000
Ɣ
plastic
0,4
42,7
64,5
72,4
1000
plastic
0,4
42,7
64,5
72,4
1000
Ɣ
plastic
0,4
42,7
64,5
72,4
1000
3/8“-24
42,7
Throughhole
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Drill Chucks
EXTRA-RV
Quick-action drill chucks EXTRA
EXTRA-RV 80
A01
EXTRA-RV 80 with SDS plus mounting shank and radial locking, metal design
Item no.
Size
Clamping
capacity mm
1288566
13
1,5-13
Mount
Retaining ring Design
External Ø
mm
Length
opened
mm
Length
closed
mm
Through-hole
1/2“-20 /
SDS plus
Ɣ
42,5
64,5
72,4
Ɣ
Length
opened
mm
55
Length
closed
mm
63,1
Through-hole
metal
Use exclusively with hammer function deactivated
A01
EXTRA-RV 80 for impact screwdriver mounting 1/4“ Hex, plastic design, specially suited for impact screwdrivers (eccentricity)
Item no.
Size
Clamping
capacity mm
Mount
1178269
10
1-10
1/4“-Hex
Retaining ring Design
plastic
External Ø
mm
42,5
1015
Drill Chucks
EXTRA-RV
Quick-action drill chucks EXTRA
EXTRA-RV 60
APPLICATION
For corded and cordless drills with spindle stop up to a maximum torque of 80
Nm and up to 1000 watt.
TYPE
Impact-resistant quick-action drill chuck with radial locking and plastic or metal
sleeve.
With through-hole for clockwise and counterclockwise rotation.
CUSTOMER BENEFITS
Easy clamping and locking with one manual operation for maximum userfriendliness
No re-clamping in clockwise and counterclockwise rotation due to radial
locking
Impact-resistant for universal use
TECHNICAL FEATURES
-
Equipped with collision protector
M
A01
EXTRA-RV 60 with radial locking, very compact metal design
1)
Item no.
Size
12612091)
13
Clamping
capacity
mm
1,5-13
Mount
1/2“-20
Retaining ring Design
metal
External Ø
mm
42,7
Length
opened
mm
55,8
Length
closed
mm
69,2
Through-hole
Length
opened
mm
55,8
Length
closed
mm
69,2
Through-hole
Ɣ
blister packaging
A01
EXTRA-RV 60 with radial locking, very compact plastic design
1)
1016
Item no.
Size
Clamping
capacity mm
Mount
12612101)
13
1,5-13
1/2“-20
blister packaging
Retaining ring Design
plastic
External Ø
mm
42,7
Ɣ
E
IN
ORANGE L
EXTRA-RV 40 - Orange Line
APPLICATION
For corded and cordless drills with spindle stop up to a maximum torque of 60
Nm and up to 650 watt.
TYPE
Impact-resistant quick-action drill chuck with radial locking and plastic or metal
sleeve.
Available in two and single sleeve design for machines with and without spindle
stop.
With through-hole for clockwise and counterclockwise rotation.
CUSTOMER BENEFITS
Easy clamping and locking with one manual operation for maximum userfriendliness
No re-clamping in clockwise and counterclockwise rotation due to radial
locking
Impact-resistant for universal use
TECHNICAL FEATURES
-
Equipped with collision protector
M
A01
EXTRA-RV 40 - Orange Line, metal design, with radial locking
1)
Item no.
Size
13
Clamping
capacity
mm
1,5-13
12612111)
12612121)
1/2“-20
13
1,5-13
1/2“-20
Ɣ
Mount
Retaining
ring
Design
metal
Concentricity External Ø
deviation
mm
max. mm
0,35
42,7
Length
opened
mm
57
Length
closed
mm
67,5
metal
0,35
57
67,5
Design
plastic
Concentricity External Ø
deviation
mm
max. mm
0,35
42,7
Length
opened
mm
50,2
Length
closed
mm
60
plastic
0,35
50,2
60
42,7
Throughhole
Ɣ
Ɣ
blister packaging
A01
EXTRA-RV 40 - Orange Line, plastic design, with radial locking
1)
Item no.
Size
Mount
Retaining
ring
10
Clamping
capacity
mm
1-10
12612171)
12612151)
3/8“-24
Ɣ
10
1-10
1/2“-20
12612161)
10
1-10
1/2“-20
12612131)
13
1,5-13
1/2“-20
12612141)
13
1,5-13
1/2“-20
Ɣ
Ɣ
42,7
plastic
0,35
42,7
50,2
60
plastic
0,35
42,7
57
67,5
plastic
0,35
42,7
57
67,5
Throughhole
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
blister packaging
1017
Drill Chucks
EXTRA-RV
Quick-action drill chucks EXTRA
UNIVERSALLY APPLICABLE
Key-type drill chucks are the all-round talents among drill chucks. In stationary box column drills,
hand-operated corded and cordless drills, the drill chucks perform in every way.
Video drill chuck
1018
Key-type
drill chucks
KEY-TYPE DRILL CHUCKS
Key-type drill chucks from RÖHM convince with their universal applicability. These drill chucks have
proven themselves over decades on stationary box column drills, machine tools, as well as on handoperated corded and cordless drills.
ADVANTAGES AT A GLANCE
Universally applicable for stationary use and on hand-operated drills
High concentricity of up to 0.15 mm due to massive construction
Increased clamping force due to proven transmission principle by means of drill chuck key
Massive construction a
long lifetime
Thread or taper mount for
maximum drive force and
precision
Increased clamping force due to
proven transmission principle from
sprocket and drill chuck key
Universally applicable for stationary
use and on hand-operated drills
1019
Drill Chucks
PRIMA
Key-type drill chucks
PRIMA-I
APPLICATION
For universal use on stationary box column drills as well as machine tools.
TYPE
Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc.
with DIN ISO 10887 (toothing in acc. with DIN 6349).
With through-hole for clockwise and counterclockwise rotation.
Industrial design with maximum precision.
CUSTOMER BENEFITS
High concentricity of up to 0.15 mm
Increased clamping force due to proven transmission principle by means of
drill chuck key
TECHNICAL FEATURES
-
Hardened keyholes and clamping prisms
M
A01
PRIMA-I heavy industrial version used on stationary box column drills as well as machine tools
Item no.
1)
1020
Size
Type
Clamping
capacity mm
Mount
072810
6
I
0,5-6,5
J1
Concentricity
deviation
max. mm
0,15
245548
6
I
0,5-6,5
B12
0,15
External Ø
mm
29,5
Length
opened
mm
42,5
Length
closed
mm
52,5
S1
29,5
47,5
57,5
S1
Key size
072687
10
I
1-10
B16
0,2
42,8
63
77
S2 A
072693
10
I
1-10
J2
0,2
42,8
59
75,5
S2 A
072818
13
I
1-13
J6
0,2
52
67,5
86
S3
072819
13
I
1-13
J33
0,2
52
67,5
86
S3
072820
13
I
1-13
5/8“-16
0,25
52
68,5
87,5
S3
072825
16
I
1-16
B18
0,2
56,5
79
98
S3
072827
16
I
1-16
J3
0,2
56,5
79
98
S3
072828
16
I
1-16
J6
0,2
56,5
79
98
S3
072829
16
I
1-16
5/8“-16
0,2
56,5
80
100,5
S3
072831
20
I
5-20
B22
0,25
65
92,5
113,5
S4
072833
20
I
5-20
J3
0,25
65
82,5
103,5
S4
0728341)
26
I
5-26
B24
0,25
80
120
147
S4
with driver
Drill Chucks
PRIMA
Key-type drill chucks
PRIMA-S / -M
APPLICATION
For universal use on stationary box column drills as well as hand-operated
corded and cordless drills.
TYPE
Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc.
with DIN ISO 10887 (toothing in acc. with DIN 6349).
With through-hole for clockwise and counterclockwise rotation.
Medium-heavy design with metal sleeve.
CUSTOMER BENEFITS
High concentricity of up to 0.2 mm
Increased clamping force due to proven transmission principle by means of
drill chuck key
TECHNICAL FEATURES
-
Hardened keyholes and clamping prisms
M
A01
PRIMA-S / -M slight intermediate sizes, primarily for hand-operated percussion drilling machines
Item no.
1)
2)
Size
Type
072811
6
M
Clamping
capacity
mm
0,5-6,5
245586
6
M
0,5-6,5
Mount
3/8“-24
Concentricity
deviation
max. mm
0,2
B10
0,2
External Ø
mm
29,5
Length
opened
mm
42,5
Length
closed
mm
53
S1
29,5
43
53
S1
Key size
245485
8
M
0,5-8
B10
0,23
29,5
43
53
S1
245550
8
M
0,5-8
B12
0,23
29,5
47,5
57,5
S1
245552
8
M
0,5-8
3/8“-24
0,28
29,5
42,5
53
S1
245553
8
M
0,5-8
1/2“-20
0,28
29,5
45
55,5
S1
072653
10
S
0,8-10
B12
0,23
34,5
50
60,5
S2 A
3172551)
10
S
0,8-10
3/8“-24
0,28
34,5
49,5
61
S2 A
3172561)
10
S
0,8-10
1/2“-20
0,28
34,5
49,5
61
S2 A
12612212)
10
S
1-10
3/8“-24
0,005
34
50
60
S2
12612222)
10
S
1-10
1/2“-20
0,005
34,5
49,5
61
S2 A
12612232)
13
S
1,5-13
1/2“-20
0,005
42,4
59
74
S2 A
064527
13
S
1,5-13
3/8“-24
0,28
42,8
59
74
S2 A
072800
13
S
1,5-13
B16
0,25
42,8
63
77
S2 A
072897
13
S
1,5-13
B12
0,25
42,8
58
72
S2 A
3172571)
13
S
1,5-13
1/2“-20
0,28
42,8
59
74
S2 A
12612242)
16
M
3-16
1/2“-20
0,03
50
68,5
87,5
S3
1154662
16
S
3-16
1/2“-20
0,35
50
68,5
87,5
S3
1154663
16
S
3-16
5/8“-16
0,35
50
87,5
68,5
S3
1154664
16
S
3-16
B 16
0,35
50
86,5
67,5
S3
1154665
16
S
3-16
B 18
0,35
50
75,5
94,7
S3
drilled-through for clockwise and counterclockwise rotating drilling and percussion drilling machines M5 or M6
blister packaging
A01
PRIMA 6L for impact drivers mounting 1/4“ Hex
Item no.
Size
Type
368292
6
L
Clamping
capacity
mm
0,5-6,5
Mount
External Ø
mm
1/4“ Hex
29,3
Length
opened
mm
42,5
Length
closed
mm
53
Key size
S14
For clockwise and counterclockwise rotation
Only with switched-off impact function
1021
Drill Chucks
PRIMA
Key-type drill chucks
PRIMA
A01
HBF hammer drill chuck with SDS plus adapter
Item no.
Size
Type
600581
13
HBF
Clamping
capacity
mm
2,5-13
Mount
External Ø
mm
SDS plus
42,9
Length
opened
mm
68
Length
closed
mm
81,5
Key size
S2A
With carbide inserts in the clamping jaws
Chuck end play for transmitting the entire impact onto the drill
For clockwise and counterclockwise rotation.
A01
PRIMA with SDS plus adapter
Item no.
Clamping capacity
mm
Mount
External Ø
mm
Length opened
mm
Length closed
mm
Key size
1288568
1,5-13
1/2“-20 / SDS plus
42,9
74
59
S2A
Only with switched-off impact function
1022
E
IN
ORANGE L
PRIMA-L - Orange Line
APPLICATION
For universal use on do-it-yourself drills.
TYPE
Impact-resistant drill chuck with key and threaded mount in acc. with DIN ISO
10887 (toothin in acc. with DIN 6349).
With through-hole for clockwise and counterclockwise rotation.
Lightweight version with metal sleeve.
CUSTOMER BENEFITS
High concentricity of up to 0.35 mm
Increased clamping force due to proven transmission principle by means of
drill chuck key
TECHNICAL FEATURES
-
Hardened clamping prisms
M
A01
PRIMA-L - Orange Line
1)
Item no.
Size
12612251)
10
Clamping
capacity
mm
1-10
1/2“-20
Concentricity
deviation max.
mm
0,35
33,5
Length
opened
mm
49,5
12612261)
10
1-10
3/8“-24
0,35
33,5
49,5
61,5
S2 A
12612271)
13
1,5-13
1/2“-20
0,35
42,5
59
74,5
S2 A
12612281)
13
1,5-13
3/8“-24
0,35
42,5
59
74,5
S2 A
Mount
External Ø
mm
Length
closed
mm
61,5
S2 A
Key size
blister packaging
1023
Drill Chucks
PRIMA-L
Key-type drill chucks
Drill chuck
keys BFS
Drill chuck keys BFS
Drill chuck keys BFS
A01
Keys with DIN toothing 6349 for key-type drill chucks
Item no.
Size
D
mm
L
mm
Weight
g
026411
S1
4
30
25
205989
S2 A
6
41
50
025835
S3
8
50
100
025839
S4
9
55
115
Size
D
mm
L
mm
Weight
g
A01
Keys with DIN toothing 6349 for key-type drill chucks
Item no.
309380
S2 AT
6
42
50
309382
S 3T
8
51
90
Item no.
Size
D
mm
L
mm
Weight
g
307319
S14
6,1
30
50
A01
Key with Jacobs-toothing
1024
Tapping chucks
GSF
Two-jaw tapping chucks
Tapping chucks GSF
A03
GSF without locking pin
Item no.
Size
Mount
Square clamping
width mm
For taps
External Ø
mm
Key
Set of jaws
319605
9
B10
3-9
M 3,5-14
28
026416
309341
303081
9
B12
3-9
M 3,5-14
28
026416
309341
A03
GSF with locking pin for an additional lock of the cone
Item no.
Size
Mount
Square clamping
width mm
For taps
External Ø
mm
Key
Set of jaws
307158
9
B12
3-9
M 3,5-14
28
026416
309341
1025
Taper shank
arbors KD
Taper shank arbors for drill chucks
Taper shank arbors KD
A04
Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground
Item no.
Morse taper
DIN 228 B
Hole for alignment
pin
L
mm
A
mm
C
mm
E
mm
G
mm
H
mm
Weight
g
014897
1
B10
86
62
12,065
14,5
10,095
9,4
55
014898
1
B12
89
62
12,065
18,5
12,065
11,1
65
014899
1
B16
97
62
12,065
24
15,733
14,5
90
014900
1
B18
106
62
12,065
32
17,78
16,2
110
0187551)
1
B18
97
62
12,065
25
17,431
16,2
95
014904
2
B10
103,5
75
17,78
14,5
10,095
9,4
130
014905
2
B12
106,5
75
17,78
18,5
12,065
11,1
135
014906
2
B16
110,5
75
17,78
24
15,733
14,5
160
180
014907
2
B18
117,5
75
17,78
32
17,78
16,2
0187561)
2
B18
108,5
75
17,78
25
17,431
16,2
165
014908
2
B22
128,5
75
17,78
40,5
21,793
19,8
245
014911
3
B12
125
94
23,825
18,5
12,065
11,1
280
014912
3
B16
134
94
23,825
24
15,733
14,5
310
320
014913
3
B18
141
94
23,825
32
17,78
16,2
0187571)
3
B18
132
94
23,825
25
17,431
16,2
320
014914
3
B22
147
94
23,825
40,5
21,793
19,8
390
014915
3
B24
158
94
23,825
50,5
23,825
21,3
440
014916
4
B16
159
117,5
31,267
24
15,733
14,5
625
660
014917
4
B18
168
117,5
31,267
32
17,78
16,2
0187581)
4
B18
159
117,5
31,267
25
17,431
16,2
640
014918
4
B22
176
117,5
31,267
40,5
21,793
19,8
715
014919
4
B24
185
117,5
31,267
50,5
23,825
21,3
770
014920
5
B16
196
149,5
44,399
24
15,733
14,5
1600
1600
014921
5
B18
204,5
149,5
44,399
32
17,78
16,2
0187591)
5
B18
195,5
149,5
44,399
25
17,431
16,2
1560
014922
5
B22
213,5
149,5
44,399
40,5
21,793
19,8
1650
014923
5
B24
224,5
149,5
44,399
50,5
23,825
21,3
1700
G
mm
H
mm
Weight
g
1)
for SUPRA and SPIRO with shortened pick up taper
Taper shank arbors with tapped shank (type 238) or cylindrical shank type (type 237) on request
A04
Taper shank arbors with Jacobs drill chuck taper completely hardened and ground
Item no.
1026
Morse taper
DIN 228 B
Hole for alignment
pin
L
mm
A
mm
C
mm
E
mm
014970
1
J1
86,5
62
12,065
16,7
9,754
8,5
50
014971
1
J2
92
62
12,065
22,2
14,199
12,4
70
014972
1
J3
101
62
12,065
31
20,599
19
50
014974
1
J6
95
62
12,065
25,4
17,17
15,9
50
014976
2
J1
101
75
17,78
16,7
9,754
8,5
130
014977
2
J2
106,5
75
17,78
22,2
14,199
12,4
160
014978
2
J3
115,5
75
17,78
31
20,599
19
200
014980
2
J33
109,5
75
17,78
25,4
15,85
14,2
160
014981
2
J6
109,5
75
17,78
25,4
17,17
15,9
165
014983
3
J2
126
94
23,825
22,2
14,199
12,4
310
014984
3
J3
135
94
23,825
31
20,599
19
350
014987
3
J33
129
94
23,825
25,4
15,85
14,2
310
014988
3
J6
129
94
23,825
25,4
17,17
15,9
310
014991
4
J3
161
117,5
31,267
31
20,599
19
475
014995
4
J6
155
117,5
31,267
25,4
17,17
15,9
620
Reducing
sleeves RH
Reducing sleeves
Reducing sleeves RH
A05
Precision version DIN 2185 completely hardened, ground internal and external
Item no.
External taper MT
Internal taper MT
L
mm
Weight
approx. g
017017
1
0
80
30
017018
2
1
92
95
017019
3
1
99
250
017020
3
2
112
190
017021
4
1
124
550
017022
4
2
124
480
017023
4
3
140
360
017024
5
1
156
1700
017025
5
2
156
1520
017026
5
3
156
1360
017027
5
4
171
950
017028
6
2
218
4300
017029
6
3
218
4100
017030
6
4
218
3600
017031
6
5
218
2550
Item no.
For MT
017075
0
90
14
017076
1+2
140
70
017077
3
190
150
017078
4
225
310
017079
5+6
265
650
Item no.
For MT
Length
mm
Weight
g
317236
1-3
320
320
317258
4-6
380
520
A05
Taper drift
Length
mm
Weight
g
A05
Taper drift for one-hand-operation
1027
Extensions
sleeves VLH
Extension sleeves VLH
Extensions sleeves VLH
A05
Precision version DIN 2187 completely hardened, ground internal and external
1028
Item no.
External taper MT
Internal taper MT
D
mm
L1
mm
L2
mm
Weight
g
029122
1
1
20
145
83
190
029123
1
2
30
160
98
340
029124
2
1
20
160
85
250
029125
2
2
30
175
100
400
029126
2
3
36
196
121
840
029127
3
1
20
175
81
400
029128
3
2
30
194
100
550
029129
3
3
36
215
121
1000
029130
3
4
48
240
146
1500
029131
4
1
20
200
82,5
800
029132
4
2
30
215
97,5
850
029133
4
3
36
240
122,5
1300
029134
4
4
48
265
147,5
1900
029135
4
5
63
300
182,5
3310
029136
5
1
20
232
82,5
1800
029137
5
2
30
247
97,5
1900
029138
5
3
36
268
118,5
2150
029139
5
4
48
300
150,5
2750
029140
5
5
63
335
185,5
4200
029141
6
4
48
355
145
5420
029142
6
5
63
390
180
6750
Drill and reamer
extensions BV
Drill and reamer extensions BV
Drill and reamer extensions BV
A05
Precision version completely hardened, ground internal and external
Item no.
External taper MT
Internal taper MT
D
mm
L1
mm
L2
mm
Weight
approx. g
029143
1
1
20
200
138
250
029144
1
1
20
250
188
375
029145
1
1
20
300
238
500
029146
1
1
20
350
288
625
029147
1
1
20
400
338
750
029148
1
1
20
450
388
875
029149
1
1
20
500
438
1000
029150
2
2
25
200
125
430
029151
2
2
25
250
175
625
029152
2
2
25
300
225
820
029153
2
2
25
350
275
1015
029154
2
2
25
400
325
1200
029155
2
2
25
450
375
1400
029156
2
2
25
500
425
1600
029157
2
2
25
600
525
1800
029158
3
3
32
250
156
1000
029159
3
3
32
300
206
1300
029160
3
3
32
350
256
1550
029161
3
3
32
400
306
1850
029162
3
3
32
450
356
2100
029163
3
3
32
500
406
2400
029164
3
3
32
600
506
2700
029165
4
4
40
300
182,5
1650
029166
4
4
40
350
232,5
2150
029167
4
4
40
400
282,5
2650
029168
4
4
40
450
332,5
3100
029169
4
4
40
500
382,5
3600
029170
4
4
40
600
482,5
4200
1029
RÖHM GmbH
Heinrich-Röhm-Straße 50
89567 Sontheim/Brenz
Germany
Tel +49 7325 16 0
Fax +49 7325 16 510
[email protected]
www.roehm.biz
Id.-Nr. 1178261 / 0915 AU

Similar documents

drill chucks

drill chucks Increased clamping force due to proven transmission principle by means of drill chuck key

More information

Orange Line

Orange Line Geared Scroll Chuck ZG In the area of manual lathe chucks the Orange Line offers the geared scroll chuck ZG as favourable alternative to the proven steel version ZS. The ZG is available with high ...

More information