High Performance Modular Multiband Internal Preamplifier for Bass

FLEX CORE
High Performance Modular Multiband Internal Preamplifier for Bass Guitar
Need headline that talks about the "4 band preamp configuration that can work with 4 to 7 or more holes"
The Flex Core from Michael Pope
Design is an extremely flexible,
fully modular, internally mounting
preamp system for the bass guitar.
Configurable for one or two pickups
with passive or active operation and
customizable multi-band equalization,
 Easy installation
 Amazing flexibility
 18V or 9V operation
 Works with almost any kind of pickup
Pope Preamp Technology: Art Engineered
and offering easy plug-and-play
installation, Flex Core puts the
ultimate in tone-shaping control right
at your fingertips!
Personalized Control
Easy Installation
The standard Flex Core system includes everything you need
to control up to two pickups and up to four bands of EQ.
Personalize your system with stacked or individual controls
for pickup volume, tone or separate EQ bands, and with
push/pull or separate active/passive switching. Need even
more flexibility and control? Options include a choice of
midrange frequency, coil tap, and standby toggle switches.
The Flex Core installs in a snap. Most installations don’t even
Online Configuration Tool
Do you want more bark, bite, growl, or punch? Or are you
looking for a mellow tone? Configure your system from our
selection of modules to give you the control you need for
the character that you want. And don’t worry—our online
configuration tool makes it easy to put together the system
that’s right for you. Visit our Flex Core questionnaire page,
make your selections from a short series of options, and
your personalized Flex Core system is ready to be ordered.
FEATURES:
require any soldering. Modules simply plug into each other with
pre-wired harnesses and connect to the pickups via a premium
screw terminal. That also makes it easy to swap out modules if
your needs change.
Designed by a Professional Bass Player
The man behind the Flex Core system is Mike Pope, the
designer of the proprietary preamps found in virtually every
Fodera bass made since 1998. As a talented bassist in
addition to a gifted designer, Mike is in
a unique position that has enabled him
to create an innovative system that can
be personalized to meet the demands of
any bass player, setting Flex Core apart
from engineer-designed preamps.
PACKAGE INCLUDES:
Most installations require NO SOLDERING
High performance, wide range preamp
with low noise and wide bandwidth
Musical EQ with LOTS of flexibility...
works with 1, 2, 3, or 4 bands
18V or 9V operation
Works with almost any kind of pickup
Solderless screw terminals for
pickup connection
All wire harnesses are PREWIRED
and plug-and-play
2 pickup volume controls or
1 pickup blend and master volume
A passive tone control
(in Core Xstk.Y and Xt.Y only)
Active/Passive switch
Bass control
Lo Mid control
Hi Mid control
Treble control
All required mounting hardware included.
For more information please visit www.michaelpopedesign.com
Pope Preamp Technology: Art Engineered
FLEX CORE
EQ Board
Treble Board
Hi Mid Board
Volume Board
(push-pull Active/
Passive Switch)
Balancer Board
Battery (+)
Neck PU Hot (+)
Neck PU Tap
Neck PU Ground
Bridge PU Hot (+)
Bridge PU Tap
Bridge PU Ground
Shields Ground
Note: Wire colors may differ from photo.
Create your Perfect Bass with the Perfect Preamp
Whether you want to breathe new life into your favorite bass or you’re building the instrument of your dreams,
the Flex Core system offers the ultimate in tone control. Affordable, flexible, and with easy plug-and-play
installation, the Flex Core system puts superior Michael Pope Design preamp technology within easy reach.
For more information visit www.michaelpopedesign.com.
Pope Preamp Technology: Art Engineered
Lo Mid Board
For more information please visit www.michaelpopedesign.com