bonding information - Dening Hair Company Hamburg

Transcription

CONCEPT + SUGGESTIONS FOR USE
BONDINGINFORMATION
¬ CONTENTS
Contents
I. BONDING CONCEPT 3
II. HAIRSYSTEMS MT-1000 MT-3000
4
MICRO-SKIN SECRET-SKIN
5
ACTIVE-SKIN STRONG-SKIN
6
III. BONDING METHOD A – FULL HEAD BONDING with medical liquid adhesive (e.g. Track-Safe)
Step by Step: Bonding without pattern
Step by Step: Bonding with pattern
Step by Step: Making of a foil pattern
7
8
9
10
IV. BONDING METHOD B – FULL HEAD BONDING 11
V. BONDING METHOD C – EDGE-BONDING 12
with adhesive tape (Blue Liner or Bonding Tape)
with adhesive tape and liquid adhesive (Brown Liner + Track-Safe)
VI. OVERVIEW ADHESIVES VII. HAIR CARE / HAIR RE-COLOR (HAIR TONING) 2 SECRET|HAIR® BONDING INFORMATION
13 - 14
15
I. BONDING CONCEPT
The Bonding hairsystem is either cut to the
• The client always receives two hairsystems so
that the removed hairsystem can be thoroughly
stock or is supplied as custom made order.
cleaned. This enables professional working and The client’s scalp is cleaned with special
a long lasting connection.
products and prepared for bonding. The
bonding is realised with medical liquid adhesive
• The bonding, removing and cleaning of the hair
(Method A – full head bonding), with special
system is done in the studio using our cleaning
adhesive tapes (Method B – full head bonding)
and care products.
or with a c ombination of adhesive tape and
liquid a dhesive (Method C – edge-bonding).
• The hairsystem is used permanently (24 hours,
The connection will last for about 3 - 6 weeks.
day and night). Therefore it is more likely to
This depends on method, care and handling of
be worn out quicker than a classical toupee.
customer as well as on type of client’s scalp.
After approx. 6 months it is recommended to
change the hairsystem. The customer will need
2-3 hairsystems per year (this is valid for MT-1000,
MT-3000, ACTIVE-SKIN and STRONG-SKIN).
SECRET|HAIR® BONDING INFORMATION 3
Bonding Konzept
required size out of a standard toupee ex
II. HAIRSYSTEMS
HAIRSYSTEMS FOR PERMANENT ATTACHMENT/
FULL HEAD BONDING
MT-1000
HUMAN HAIR
MT-3000
1
Hairsystems
1
HUMAN HAIR
1 Soft-Mono-Lace
(Welded-Mono)
26 x 19 cm
HUMAN HAIR
MT-1000 1 Soft-Mono-Lace
(Welded-Mono)
26 x 19 cm
HUMAN HAIR
MT-3000 Soft-Mono-Lace (Welded-Mono)
Soft-Mono-Lace (Welded-Mono)
Hair volume:
light-medium to medium, 115 - 130 %
Hair volume:
medium, 130 %
Size:
26 x 19 cm
Size:
26 x 19 cm
Hair quality:
human hair: Indo Hair, white (grey) hair
made of heat-resistant synthetic fibre
Hair quality:
human hair: Elegant Remy Hair, high quality
Indo Hair (Indo Special), white (grey) hair
Hair style:
indirect parting left, Freestyle, all styles possible
Hair style:
All-Back-Style, stand-up knotting from front to back, all styles possible
Hair length:
15 cm
Hair length:
20 cm
Base material: Welded-Mono (medium strong – Soft-Mono-Lace)
Base material: Welded-Mono (medium strong - Soft-Mono-Lace)
Front:
Welded-Mono (medium-strong)
Front:
Welded-Mono (medium strong)
Adhesive
surface:
none, special adhesive necessary for lace
Adhesive
surface:
none, special adhesive necessary for lace
Colours:
1-B,2, 2-B, 3, 4, 6, 7, 9, 10, 11, 12-G, 14, 15, 16
2B/10, 2B/20, 2B/40, 4/20, 4/40, 4/90, 10/20,
10/40, 10/60, 10/85, 11/75, 12/50, 14/40
Colours:
1-B, 2-B, 3, 4, 6, 7, 10, 11, 12-G, 14, 15, 16, 21,
23A/26, 31, 33/32B
Chocolate/Cream-Root (10/27/20R+Root8), Honey-Toast (12/15/25-12), Honey-
Mix (12A/25R/28), Vanilla-Root (14/26-14),
Champagne-Root (20R/23+Root 10)
2B/10, 2B/20, 2B/40, 4/20, 4/40, 4/60, 4/90, 10/20,
10/40, 10/60, 11/30, 11/75, 12/25, 12/50, 14/40
The customer will need approx. 2 hairsystems per year.
4 SECRET|HAIR® BONDING INFORMATION
The customer will need approx. 2 hairsystems per year.
MICRO-SKIN
HUMAN HAIR
SECRET-SKIN
1
HUMAN HAIR
1
Hairsystems
1 very thin transparent PU-Skin, G2
26 x 19 cm
HUMAN HAIR
MICRO-SKIN Very thin transparent PU-Skin (Polyurethan)
26 x 19 cm
1 thin transparent PU-Skin, G6
HUMAN HAIR
SECRET-SKIN Thin transparent PU-Skin (Polyurethan)
Size:
26 x 19 cm
Size:
26 x 19 cm
Hair quality:
Hair quality:
Hair style:
Freestyle, all styles possible
Hair style:
Hair length:
15 cm
Hair length:
15 cm
Hair volume:
light-medium, 115 %
Hair volume:
light-medium to medium, 115 - 120 %
Base material: very thin transparent PU, strength G2
Base material: thin transparent PU, strength G6
Front:
transparent PU, strength G2
Front:
Adhesive
surface:
all over PU
Adhesive
surface:
all over PU
Colours:
1-B, 2, 2-B, 3, 4, 6, 7, 9, 10, 11, 12-G, 14, 15, 16
2B/10, 2B/20, 2B/40, 4/20, 4/40, 4/90, 10/20, 10/40, 10/60, 11/30, 11/75, 12/25, 12/50, 14/40
Colours:
1-B, 2, 2-B, 3, 4, 6, 7, 9, 10, 11, 12-G, 14, 15, 16,
21, 23A/26
2B/10, 2B/20, 2B/40, 2B/60, 4/20, 4/40, 4/90,
10/20, 10/40, 10/60, 11/30, 11/75, 12/25, 12/50,
14/40
The customer will need approx. 6-12 hairsystems per year.
HAIRSYSTEMS
HAIRSYSTEMS FOR PERMANENT ATTACHMENT/
FULL HEAD BONDING
ACTIVE-SKIN
HUMAN HAIR
STRONG-SKIN
HUMAN HAIR
1
1
Hairsystems
2
1 transparent PU-Skin, G4
2 transparent PU-Skin with Silk-Inlay, G8
26 x 19 cm
HUMAN HAIR
ACTIVE-SKIN Transparent PU-Skin (Polyurethan)
with Silk-Inlay
26 x 19 cm
1 stable transparent PU-Skin, G12
STRONG-SKIN HUMAN HAIR
Stable transparent PU-Skin (Polyurethan)
Size:
26 x 19 cm
Size:
26 x 19 cm
Hair quality:
Hair quality:
Hair style:
Hair style:
Hair length:
15 cm
Hair length:
15 cm
Hair volume:
medium, 130 %
Hair volume:
medium to medium-heavy, 140 %
Base material: transparent PU with Silk-Inlay, strength G8
Base material: stable transparent PU, strength G12
Front:
0.5 cm transparent PU, strength G4
Front:
Adhesive
surface:
all over PU
Adhesive
surface:
all over PU
Colours:
1-B, 2, 2-B, 3, 4, 6, 7, 9, 10, 11, 12-G, 14, 15, 16, 21
2B/10, 2B/20, 2B/40, 4/20, 4/40, 4/90, 10/20,
10/40, 10/60, 10/85, 11/75, 12/50, 14/40
Colours:
1-B, 2, 2-B, 3, 4, 6, 7, 9, 10, 11, 12-G, 14, 15, 16,
21, 23A/26
2B/10, 2B/20, 2B/40, 4/20, 4/40, 4/90, 10/20,
10/40, 10/60, 11/30, 11/75, 12/50, 14/40
III. BONDING METHOD A
Method A is FULL HEAD BONDING with medical liquid adhesive (e.g. Track-Safe).
STEP 4: DRYING OF SCALP
To test tolerability of the chosen liquid adhesive: Apply liquid
adhesive on skin, let it dry and cover it with a plaster. Check the
skin-reaction after 24 hours. The medical liquid adhesives (TrackSafe, Skin-Bond and Track-Power) are dermatologically tested. If
a skin-reaction or an increased sensibility occurs, please avoid
any further contact with this product.
Dry the skin carefully. Do not use a blow dryer at this stage, since
this would increase the formation of oil on the scalp.
STEP 1: REMOVING THE HAIRSYSTEM
Application Instructions TRACK-SAFE:
Start to remove the hairsystem with TRACK-SAFE REMOVERSPRAY, by spraying it beneath the edge (make sure the client
has lent back his head). Work in the remover by spraying it from
back to front and peel off the hairpiece carefully.
STEP 5: BONDING
The scalp is now prepared and ready for bonding with either
TRACK-SAFE, TRACK-POWER or SKIN-BOND.
Apply a thin layer of TRACK-SAFE with a sponge to the connectionarea on the scalp. Leave it on for 7 minutes until the adhesive
turns transparent. Repeat this process and apply a second thin
layer of adhesive which also has to dry 7 minutes.
Application Instructions TRACK-POWER and SKIN-BOND
STEP 2: CLEANING OF HAIRSYSTEM
To clean a hairsystem of PU-Skin apply some CITRUS CLEANER
on the area of the hairpiece from which you intend to remove
the adhesive or if to clean a hairsystem of Soft-Mono-Lace put
the complete hairpiece into some Citrus Cleaner and let it work
in overnight. Remove adhesive residues carefully with a spatula.
Rinse the hairsystem with clear water (tough jet of water) from the
top to remove entire adhesive. Wash hair system with BLUE DEEP
CLEAN SHAMPOO, let it work in for a short period and rinse with
lukewarm water. Before bonding the hairsystem must be dry and
its basis should not show residues of shampoo, balm, adhesive or
oil. Finally clean the underside of hairpiece with alcohol.
Apply 4 thin coat’s to client’s scalp. Wait 20 seconds in between
coat 1 to 3 for each coat to dry. Wait 4 minutes after application
of 4th coat.
Press now base strongly on to scalp. The hairsystem can be
styled after 5 minutes. The adhesive must become completely dry.
Therefore it is not allowed to wash hair within the first 24 hours
after bonding. Excessive perspiring can also affect bond. Please
advise client to refrain from all strenuous activities for 36 hours.
STEP 3: CLEANING THE SCALP
After having removed the hairsystem, spray some TRACK-SAFE
REMOVER on the scalp to remove all adhesive residues. Then head’s
skin is washed with water. Afterwards apply BLUE PEELING GEL
on the scalp with smooth rotating movements. By this procedure
the skin is peeled and cleaned thoroughly. Leave on scalp for
5 minutes and wash with BLUE DEEP CLEAN SHAMPOO to remove
oil and fat from the scalp. Remove remaining hairs carefully with
a razor blade. Finally wipe the skin with alcohol!
Bonding Method A
STEP 0: TOLERABILITY
¬ METHOD A: BONDING WITHOUT PATTERN
USING THE EXAMPLE OF A PU-SKIN HAIRSYSTEM (SECRET-SKIN)
STEP BY STEP
The hairline is marked with a wipeable
pencil (dermatograph or eyeliner from
the drugstore).
The mark is then removed so that it is
only seen slightly.
Medical adhesive is carefully applied on
whole scalp.
Medical adhesive is additionally applied
on front of hairpiece.
(Attention! Only on PU-Skin!)
After drying time (see Step 5) apply hair
piece exactly at the hairline mark.
The hair piece is now cautiously placed
on whole scalp.
The hair piece is combed from the tips
cautiously.
Now the hair piece is lifted and the cap is
cut exactly along the scalp.
Step by Step
The scalp is shaved clean.
The hair can now be cut as usual and formed with blow dryer, hair spray, gel etc., according to client‘ s requirement.
¬ METHODE A: BONDING WITH PATTERN
USING THE EXAMPLE OF A SOFT-MONO-LACE HAIRSYSTEM (MT-3000)
STEP BY STEP
A pattern is made in order to cut the
stock hairsystem into needed size.
The contour (size) is marked onto back side of the hairsystem with a textile
marker.
Along the white line hair is sectioned and
cap is cut accordingly with scissors.
Take the pattern and apply three marking
points onto scalp and onto hairsystem.
Apply adhesive tape around the pattern to avoid that adhesive sticks to forehead
and hair.
Liquid adhesive is applied onto scalp
using a sponge.
After drying time (see Step 5) place hair
system onto scalp exactly according to
marked points.
The hair can now be cut as usual and can
be formed with blow dryer, hairspray or gel according to clients’ requirement.
Step by Step
Remove hair thoroughly from the scalp.
¬ MAKING OF A CAST (PATTERN)
EXAMPLE: FOIL PATTERN
Step by Step
STEP BY STEP
Transparent foil (Art. 4092) is stretched over full head. With
a permanent marker, then the scalp and front of hairline is
marked accurately.
The foil is fixed with a fabric tape (Scotch-895 adhesive tape
for stabilising pattern, Art. 4094), lengthwise and crossway.
The fabric tape should be applied slightly overlapping, so that
a solid form results.
Now the pattern is cut along the red mark.
On the pattern can be indicated all information about
requested mix of materials. Kindly always indicate F (=Front)
as well as B (=Back).
IV. BONDING METHOD B
Method B is FULL HEAD BONDING with adhesive tapes (Blue Liner, Bonding Tape or Ultra Tape).
All adhesive tapes are SPECIALLY DEVELOPED FOR PERMANENT BONDING (details on page 14).
To test tolerability of adhesive attach a piece to the skin and
cover it with a plaster. Check skin-reaction after 24 hours. If a
skin-reaction or an increased sensibility occurs, please avoid any
further contact with this product.
Cleaning is done in the same way as described for method A. The
adhesive tape will swell in CITRUS CLEANER and can be removed
easily.
STEP 1: REMOVING OF HAIRSYSTEM
Start to remove the hairsystem by spraying TRACK-SAFE REMOVER-SPRAY or MANAGER TOP CLEANER beneath the edges of
adhesive area (make sure that the client has lent back his head).
Work in the remover by spraying it from back to front and peel
off the hairpiece carefully. The adhesive tape will remain on the
hairpiece after a longer wearing period. Please avoid pulling-off
with force. By this hair will stick to the tape or the hairsystem
will be torn.
STEP 3: CLEANING OF SCALP
Cleaning of scalp is done in the same way as described for method A.
STEP 5: ATTACHMENT
The scalp is now prepared and ready for the connection with
BLUE LINER, BONDING TAPE respectively ULTRA TAPE. First the
adhesive tape is attached to the hairsystem. The edges should be
covered completely with tape, and glued very accurately (exactly
to a millimetre). If an overhang is developed, the hairsystem could
roll up after a while. Folds in the adhesive tape must be avoided.
In the middle of the hairsystem some additional tapes should
be attached. Carefully moisten the tape a little with water or
M ANAGER TOP CLEANER from the lower side and position the
base on the scalp. After 5 minutes press the base firmly to scalp.
Attention: without moistening, the tape will glue immediately.
The hairsystem can be dried and styled just as you like after five
minutes. Do not wash the hair for the first 24 hours hair after
bonding. The adhesive must become completely dry. Attachment with Bonding Tape “strips” in the middle + “Mini Strips” for the edges.
Bonding Method B
V. BONDING METHOD C
Method C is TRACK-BONDING (edge-bonding) with adhesive tape (Brown Liner)
and medical liquid adhesives (as e.g. Track-Safe).
Bonding Method C
For edge-bonding the hairsystem is fixed on a 2.5 cm wide edge from temple to temple. The hairpiece must have
a PU-edge on which a special adhesive tape (Brown Liner, Art. 5053) is glued. Medical adhesive is spread on the adhesive tape. The connection will last for approx. up to 8 weeks. For edge-bonding we recommend styles
MT-2500, MT-2700 or a custom-made hairpiece.
STEP 3: CLEANING OF SCALP
To test tolerability of Track-Safe apply some adhesive to the skin,
let it dry and cover it with a plaster. Check skin-reaction after 24
hours. Track-Safe is dermatologically tested. If a skin-reaction or
an increased sensibility occurs, please avoid any further contact
with this product.
Cleaning of scalp is done in the same way as described for
method A.
STEP 1: REMOVING OF HAIRSYSTEM
Remove the hairsystem using TRACK-SAFE REMOVER-SPRAY
(Remover), spraying beneath the edge of the adhesive area and
peel-off carefully.
Cleaning is done in the same way as described for method A. The
adhesive tape will swell in CITRUS CLEANER and can be removed
easily.
STEP 5: BONDING
Attach BROWN LINER to the PU-edge of hairsystem. Remove foil
from the adhesive tape and apply TRACK-SAFE using a brush.
Additionally a thin layer of TRACK-SAFE is to be applied with
a sponge to the bonding-area of scalp. The adhesive has to dry
7 minutes until it becomes a transparent appearance. Press the
hairsystem onto the scalp. Attention: No air bubbles must be
underneath the adhesive edge. The hairsystem can be dried and
styled just as you like after five minutes. Do not wash the hair for
24 hours after bonding. The adhesive must become completely dry.
The hairline is fixed with a normal adhesive tape (as Red Liner).
This can be changed after some days by the customer himself.
VI.OVERVIEW ADHESIVES
Adhesives
BONDING: LIQUID ADHESIVES & CARE PRODUCTS
Art.No.
Description/Use
15 ml
150 ml
40 ml
150 ml
Size
5050
5052
5043
5042
Ultra-Bond
40 ml
150 ml
125 ml
5045
5044
5056
Ultra-Bond-Touch with brush
40 ml
5056-Touch
Tight-Grip with sponge
40 ml
5054
25 mm x 2.7 m
200 ml
1 litre
200 ml
1 litre
1 litre
5 litre
200 ml
5053
Medical liquid adhesive for permanent full head attachment
for up to 4 weeks (bonding method A)
Alternative for Track-Safe with higher adhesive strength,
particularly suitable for high outside temperatures, high air humidity and stronger transpiration of customer
Medical liquid adhesive, specifically for Poly (PU-Skin) Systems (Polyurethan). Alternative for Track-Safe.
Medical liquid adhesive for permanent full head attachment
for up to 4 weeks (bonding method A)
Thinner version of Ultra-Bond, to touch-up (bond) lifting
areas as front and sides and for attachment up to 2 weeks
Front-attachment for lace and PU, attachment for up to 2 weeks
Adhesive tape with tissue for edge-bonding with Track-Safe (bonding method C)
Peeling gel to deeply clean skin, removes dandruff, scaling and crustration
Deep cleaning of skin and hair to remove fat and oil
Track-Safe
Track-Power
Skin-Bond
Brown Liner Roll
Blue Peeling Gel
Blue Deep Clean Shampoo
Citrus Cleaner
Track-Safe-Remover
Sponge for application of
Track-Safe
Brush for application of
Track-Safe
5080
5081
5082
5083
5058.1L
5058.5L
5055
6 pcs.
4097
6 pcs.
4097.P
Cleaner with citrus oil, cleaning of hairsystem and to remove bonding adhesives
Dissolves and removes hairsystem from scalp, suitable for all bonding adhesives, spray bottle, mild on skin
Cosmetic sponge to apply Track-Safe thinly and evenly, disposable
Cosmetic brush to apply Track-Safe thinly and evenly, disposable
BONDINGADHESIVETAPES
Bonding Tape
Adhesives
BLUELINERAdhesiveTapetransparent/extrastrongadhesivestrength
Strips
Frontstrips
Roll
36pcs.
36pcs.
Size
Art.No.
Description/Use
25x75mm
25x75mm
25mmx2.7m
25mmx33m
4052
4053
4053.R1
4053.R2
•Extrastrongadhesivetapeforpermanentattachment
from3to4weeks
•Suitableforlace,MonofilamentandSoft-Mono-Lace-Front
•Mattsurfacefordullfinish
BONDINGTAPEAdhesiveTapetransparentwithholes/extrastrongadhesivestrength
Strips
Mini-Strips
10pcs.
90pcs.
36pcs.
Size
Art.No.
Description/Use
3.8x30.5cm
3.8x30.5cm
2x4cm
4068.10
4068.box
4068.mini
from3to6weeks
•Bestholdifscalpisoilandfatfree
•BeforeattachmentcleanskinwithBLUEPEELINGGELand
BLUEDEEPCLEANINGSHAMPOO
ULTRATAPEAdhesiveTapetransparent/extrastrongadhesivestrength/mattsurface
Strips
Mini-Strips
Frontstrips
Roll
36pcs.
72pcs.
36pcs.
Size
Art.No.
Description/Use
25x75mm
2x4cm
25x75mm
25mmx2,7m
25mmx33m
5046.S
5046.mini
5046.A
5046.R1
5046.R2
from3to6weeks
•Bestholdifscalpisoilandfatfree
•Verythin/flexible+antireflection(verymatt)surface,
perfectforthinlace-fronts
REDLINERAdhesiveTapetransparent/strongadhesivestrengthwithoutgreasing
Strips
Frontstrips
Roll
36pcs.
36pcs.
Size
Art.No.
Description/Use
25x75mm
25x75mm
25mmx2.7m
25mmx33m
4050
4051
4051.R1
4051.R2
•Strongadhesivestripforlace,monofilamentand
Soft-Mono-Lace-Front
•AlsosuitableforPU
•Strongadhesivestrength,lastsupto3days
•Doesnotgrease
DUO-TAC-TAPEAdhesiveTapetransparent/CombinedREDandBLUELINER
Strips
Frontstrips
36pcs.
36pcs.
Size
Art.No.
Description/Use
25x75mm
25x75mm
4054.S
4054.A
•Verystrongadhesivestrengthandeasyremovingofhairsystem
•OnesideREDLINER,othersideBLUELINER
•Adhesivetapeforlace,net,monoandPU,lastsupto2weeks
An overview of the whole range of adhesive tapes you will find in the current Manager Top catalogue on page 30 and 31.
VII.HAIR CARE / HAIR RE-COLOR (HAIR TONING)
PROFESSIONAL HAIR CARE for synthetic and human hair
Size
Cleaner Solvant
Hair Shine
200 ml
200 ml
Art.No.
Description/Use
5092
5093
Cleansing Spray for adhesive surfaces and scalp
Perfect finish for human and synthetic hair
NATURAL HAIR CARE for human hair
VITAL Balm
200 ml
1,000 ml
200 ml
1,000 ml
Art.No.
Description/Use
5085
5086
5087
5088
Shampoo for soft, silky and luxurious human hair
Balm to repair and detangle the structure of human hair
HAIR RE-COLOR
Hair Re-Color Standard
Function:
Art. 5059.S
For all colours, especially ash-tones.
Hair Re-Color is used to tone human hair
pieces to original colour after bleaching
through sun impact or strong care products. Gives also ash colour back to hair
after the sun has turned hair colour to a
reddish tone. The original tone is regained.
You will need experience for the application
of Hair Re-Color. After using the product
you will be able to judge necessary grade
of dilution and application-time. When you
start using the product it is recommended
to put the hairsystem into a solution diluted
to a grade which perhaps might be too light
and to use an application time which might
be a little too short.
Hair Re-Color Brown
Art. 5059.B
warm brown-tone
For all colours, especially warm brown-tones.
Hair Re-Color Red
Art. 5059.Red
for reddish colours
Hair tone – regains original colour.
Hair Re-Color is not a colour but a hair
tone. The product is directly absorbed by
the hair and it regains its original colour.
Works on dark, blond and grey shade
colours but does not colour mesh or PU
of the hairpiece.
Application:
Dilute (thin down) 1 to 3 up to 1 to 20.
Put the hairpiece into the solution for
30 seconds up to 5 minutes. For darker
colours please choose a longer applicationtime and a solution with minor dilution.
For lighter/grey hair choose a shorter
application-time and a solution diluted to
a higher extent.
After placing hairpiece into the solution
the process should be controlled every 10
seconds. Remove hairpiece and dry one
strand with a towel and check desired hair
colour. In case the required hair colour is
regained the hairpiece is to be rinsed and
washed immediately using MANAGER TOP
VITAL SHAMPOO. Then it is to be squeezed
in a towel and to be air dried as usually.
Attention:
Too long application time or a minor
grade of dilution may turn hair colour
darker.
Hair Care / Hair Re-Color
Size
VITAL Shampoo
11.2014 © DENING HAIR COMPANY GmbH, Hamburg – www.dening.de

bonding information - Dening Hair Company Hamburg

Transcription

Similar documents

a facial fo r yo ur h air

SF]ELF F1 ELP

ORGANIC ROOT STIMULATOR Carrot Oil

Salon Product

here - Women`s ROGAINE

Featured on Style Me Pretty - Black Tie at Goodstone Inn

Bridal Hair, Kenra Style

Dry Twist Out 101

Easter 2016 Flyer-Digital-FINAL

Girls Scrunchie