Aquasil Ultra Brochure

Aquasil Ultra Impression Material.
Putting precision into every procedure.
The perfect restoration
always begins with an
Aquasil Ultra Impression.
When your cases are critical, you need consistently precise performance.
No matter what the application or procedural preference is, Aquasil Ultra’s
wide range of tray and wash materials accommodates it.
The vibrant colors of Aquasil Ultra’s tray and wash materials contrast, making it easier to read the impression.
Indicated here are the types of procedures Aquasil Ultra material is suited for, as well as our specific product recommendations.
Wash material: Aquasil Ultra XLV
Tray material: Aquasil Ultra Rigid
Single Unit Cases
Rigid viscosity provides extra
stability to resist distortion common
to closed-bite trays
First Bite® closed-bite tray
Removable Prostheses
Four “predictable” steps to
a perfect-fitting denture
Massad™ Edentulous Tray & Technique
Multi-Unit (2-5) Cases
Precision with stability and readability
Wash material: Aquasil Ultra XLV
Tray material: Aquasil Ultra Heavy
Impression provided by Vivek Mehta, DMD
Long Span/Full Arch Cases
Aquasil Ultra Xtra material offers longer
intraoral work time to give maximum
syringe time for larger cases
Wash material: Aquasil Ultra Xtra
Tray material: Aquasil Ultra Xtra
Impression provided by Alan Boghosian, DDS
Clear Aligners
Detail precision necessary
for CAD/CAM design
Wash material: Aquasil Ultra XLV
Tray material: Aquasil EasyMix Putty
1. Size tray.
2.Place tissue stops.
3.Create border mold:
Aquasil Ultra Rigid
or Aquasil Ultra
Monophase.
4.Fill with wash material:
Aquasil Ultra LV or
Aquasil Ultra XLV.
Impression provided by Joseph Massad, DDS
Aquasil Ultra Material.
Optimized for precision.
Formulated for ease of use.
work times
Wash Material Intraoral Work Time: 0m 35s
Aquasil Ultra material
Super Fast Set
is available in multiple
0s
setting times to suit a
variety of clinical scenarios.
Fast Set
Understanding this timing is
0s
critical to clinical success. For
example, fast setting material
allows for 35 seconds of
Regular Set
syringe time, while tray must
0s
be seated in 90 seconds and
can be removed from mouth
Aquasil Ultra Xtra
(MRT) in 3 minutes.
0s
W
2m 30s MRT
Setting Time
MUST seat tray by 0m 35s
Wash Material Intraoral Work Time: 0m 35s
W
3m 00s MRT
Setting Time
MUST seat tray by 0m 35s
Wash Material Intraoral Work Time: 1m 10s
W
Setting Time
5m 00s MRT
MUST seat tray by 1m 10s
Wash Material Intraoral Work Time: 1m 45s
W
Setting Time
5m 30s MRT
MUST seat tray by 1m 45s
surface optimization
B4® Pre-Impression Surface
Optimizer helps you achieve
exceptional results by
reducing surface tension,
allowing the Aquasil Ultra
wash material to flow into
even hard-to-reach areas.
XLV material flow without
B4® surface optimizer
Preparation after application
of B4® surface optimizer
XLV flow following application
of B4® surface optimizer
wettability
80
Aquasil Ultra LV RS
Aquasil Ultra XLV RS
70
Imprint 3 RS LT Body
60
Flexitime LT Body RS
50
Exa’lence Xtra LT Body RS
Take 1 Advanced Wash RS
40
Impregum Penta Soft-LT
30
Exafast Inj FS
20
Examix Inj RS
Splash Low
time in seconds
contact angle (degrees)
Aquasil Ultra material is uniquely
formulated to minimize voids
and bubbles. Extremely low
contact angle allows material
to capture detail in a moist oral
field. Hydrophilicity allows for
better adaptation to tooth
structure and sulcus.
10
2
3
4
5
6
7
8
9
10
11
12
13
14
15
tear strength
Aquasil Ultra LV
352 psi
Exa’lence Wash
249 psi
Imprint 3 LB
246 psi
SplashLV
208 psi
Impregum Penta Soft
188 psi
Take 1 Advanced
Wash 134 psi
Flexitime LT Flow
Wash 129 psi
Examix Inj
112 psi
Exafast Inj
108 psi
*Data on file. For test method visit caulk.com. Imprint 3 LB,
Flexitime, Exa’lence, Take 1 Advanced, Impregum Penta Soft-LT,
Exafast Inj, Examix Inj and Splash Low are not registered
trademarks of DENTSPLY International.
200
100
0
psi
300
Aquasil Ultra’s wash material is at least 40%
stronger than 23 other leading wash materials
tested.* Superior tear strength keeps impression
from tearing or distorting during removal from
mouth or separation from model.
Aquasil Ultra Material.
Fits your technique.
And your operatory.
delivery systems
Standard Foil Pack
360mL volume
35mL material waste
DECA™ Cartridge
380mL volume
2mL material waste
duomix II Dynamic Mixer/
DECA™ 380mL Cartridge
• Fastest extrusion speed on the market
• Ease/durability in a one-component
cartridge system
• Provides 15% more useable
impression material
Dispenser/50mL Cartridge
• Versatile and convenient
• Effective for tray or wash material
digit® Targeted Delivery System
• Available in two unit dose sizes: small cartridge is ideal for single unit crowns,
and large cartridge contains enough material for multiple unit cases.
• Easier access allows for precise placement
• Minimizes waste
Output ~ 325mL
Output ~ 378mL
~ 53 mL difference
15% more
www.aquasilultra.com
REALITY has awarded Aquasil Ultra
the highest possible rating once again
based on viscosities, intraoral flow,
shark fin height, working time, mouth
removal time, hardness and delivery
systems. No other impression
material has ever achieved this
distinction NINE YEARS running.
38 West Clarke Avenue
Milford, DE 19963
1-800-532-2855
www.caulk.com
www.dentsply.com
www.aquasilultra.com
©2012 DENTSPLY International. All rights reserved. Form #578983 (R 7/27/12)