View / our Copper Scuppers brochure

INTRODUCING
Copper Scuppers
Offered in Sheet Flow, Trough Flow and Chute Flow
Construction:
1” reveal with a -30° lip angle provides for a smooth water nappe
100% copper construction; including weld filler material, couplers and bond
lug. No dissimilar metals - reduces the potential for corrosion and increases the
product life span
Competitive Advantages:
Comes with a 1.5" copper inlet fitting. 36" and 48" models have 2 evenly spaced
inlet fittings
All scuppers are “leak pressure tested” at the factory to ensure all seams are full
penetration welds
Inside corners are reinforced for structural integrity to prolong the performance
lifecycle
Dual stage internal baffles balance the flow dynamics for a consistent water
sheet. The open baffles prevent risk of clogging, reduce water flow requirements
and lower electrical costs
Water Flow:
A 10 GPM per linear foot water flow will create a clean, quiet, smooth and
translucent cascade of water
At 25 GPM per linear foot, the water sheet will produce a stronger and more
natural rippled cascade. This will emit a whitewater splash and screen out any
background sounds
Variable flow can be adjusted for your visual and accoustic outdoor needs
Performance... Style... Reliability
Scupper sell sheet.indd 1
10/29/2015 4:20:53 PM
Offered in the following shapes and sizes
Sheet Flow:
Width
8”
12”
16”
24”
36”
48”
Part Number
FAW-SF008
FAW-SF012
FAW-SF016
FAW-SF024*
FAW-SF036*
FAW-SF048*
Trough Flow:
Width
6”
8”
12”
16”
24”
36”
48”
Part Number
FAW-TF006
FAW-TF008
FAW-TF012
FAW-TF016*
FAW-TF024*
FAW-TF036*
FAW-TF048*
Chute Flow:
Width
6”
8”
12”
Part Number
FAW-CF006
FAW-CF008
FAW-CF012
* Phase 2 launch
Scupper sell sheet.indd 2
10/29/2015 4:20:54 PM