TND 760 - Pivot Technology Resources

TM
TND 760
TM
TND 760
TM
Features
Truck-specific routing
Truck-specific routing based on your truck length, height and width, and load type.
Turn-by-turn routing
Notification of upcoming left and right turns, street names, lane guidance, distance to turn,
and side of street of destination.
Multi-stop routing optimization
Routing optimization up to 50 stops and ability to preview the entire route at a highway level.
Automatic re-routing
Immediate re-routing when drivers deviate from a designated route. Re-routing can be paused and
then resumed later, reducing unnecessary voice and direction activity.
Turn-by-turn voice guidance
Spoken, turn-by-turn voice directions aimed at minimizing driver distraction.
Fleet-configured route destination
Push a route destination (address & lat/long coordinate) from fleet manager to the driver.
Multiple options for finding a destination
Find a destination by address, zip code, intersection, or latitude/longitude.
Driver alerts
Audible warnings of upcoming sharp curves, steep hills, state boundaries, tolls,
and speed limit and time zone changes.
Speed warning system
Voice notification when speed limit changes occur and when drivers exceed the posted speed limit.
Junction View with Lane Assist
Manage complex interchanges in 3D.
“Bread-crumb” trails
Option to record and replay routes driven. Ideal for driving off-road or through distribution centers.
Avoid and prefer roads
Save detours, avoidance of road segments, and receipt of warnings for upcoming hazards.
Truck and driver-specific Points of Interest
Millions of POI listings and detailed information on truck stops, overnight parking,
dining options, and more.
Truckers Friend® National Truck Stop
Directory
Detailed information on thousands of truck stops, weigh stations & rest areas.
TruckDown®
Find truck washes, truck repair, towing and service locations.
Exits Quick View
Information about truck-friendly locations off the upcoming exits along your route.
“Am I close?”
Dynamic street address information that appears as you approach your destination.
Mile markers displayed along route
View current location by mile marker.
Virtual dashboard
At-a-glance access to metrics that help monitor progress and productivity – including sunrise or sunset,
altitude, percentage of trip completed, current speed, posted speed limit, odometer and more.
Cross-reference to Rand McNally’s
Motor Carriers’ Road Atlas
Easy reference where you can find corresponding map data in your paper atlas.
Multiple languages supported
User interface and voice guidance in English, Spanish and French.
Rand McNally’s IntelliRoute® navigation application is available on both the TND™ 760 and TPC 7600 in-cab devices.
TRUCK DATA
Rand McNally Connect Services Portal
Rand McNally Connect Services Portal
is the web-based command center
behind all of Rand McNally’s mobile
communications solutions.
Dashboard Screen
Map View & Vehicle Search Window
Deceleration Report & Critical Event Reconstruction
Polygonal Geofence
Vehicle Performance Summary Report
Rand McNally Connect Services Portal displays detailed
driver and vehicle performance metrics via dashboards,
mapping, and reporting. It enables managers to communicate
with their drivers and provides them with the real-time and historic
information needed to improve compliance, safety and fuel
efficiency, reducing expenses and maximizing productivity.
Rand McNally Connect Services Portal
Features
Fleet Performance Analytics
Fleet-wide dashboard
Provides fleet managers at-a-glance charts and graphs showing critical metrics and trends,
searchable by fleet or group.
Fleet-configured overspeed reporting
Speed reports based on the fleet-configurable maximum speed.
Speed band-based reporting
View data based on speed ranges (i.e. 58-62 MPH), including engine time, miles, hard brake count
and fuel consumption.
Idle reporting
Driver and vehicle-specific idle times and percentages.
Critical event reconstruction
Specific second-by-second analysis of potential accidents and their locations, graphically showing
vehicle speed, RPM, brake, and throttle data.
Cruise control reporting
Driver and vehicle-specific cruise control miles, times, and a percentage breakdown of use.
State mileage reporting
State-by-state breakdowns of vehicle miles and fuel consumption for fuel tax reporting.
Miles per Gallon reporting
Driver and vehicle-specific data on fuel consumption while driving or idling, including driving and idling
miles per gallon, fuel consumption by speed range.
Text message & email performance alerts
Text message & email alerts for Hours of Service violations, over fleet speed events, over RPM events,
excessive idling, and rapid deceleration.
User-configurable & exception-based
reporting
View only the data you really need to see by adding customizable fields and filters for any driver or
vehicle performance report.
More than 200 distinct vehicle metrics
Comprehensive data on every vehicle’s performance, fuel & mileage, speed, engine load, RPM, vehicle
diagnostic faults, environmental elements, regional fuel, and more.
Download reports to spreadsheets
Easy downloading of all reports to the back-office.
Mapping
Location data searchable by driver & vehicle
Find a specific driver or vehicle on the map based on real-time location.
Map proximity search
Pinpoint real-time location of drivers & vehicles on the map based on proximity to a selected zip code,
address, landmark, or any point on the map.
Configurable map display
Standard map view, satellite view, topographic and hybrid view (standard road names
overlayed on satellite view).
Fleet-configured route destination
Integrate driver’s stop assignments into daily Workflow via third-party application.
Map bread-crumb trails
Replay a driver or vehicle bread-crumb trail for a specified period of time. Displays bread-crumbs based
on order traveled, color-coded based on position updates, hard brakes and idling events, and cardinal
direction of travel for each bread-crumb.
Polygonal & route geofencing
Create and save polygonal geofences for terminals, customer locations, and more. Create and save route
geofences for monitoring and curbing out-of-route driving.
Upload landmarks/Points of Interest
Add a customized list of map landmarks for terminals, customer locations, and more.
Can be organized by group.
Vehicle arrive/depart & detention reporting
Displays vehicles and locations from which they have arrived and departed, as well as detention times
within geofences. Can be configured for a geofence group based on customer locations & groupings.
Vehicle fault code visibility
Real-time notification of vehicle maintenance issues as they happen.
Text message & email arrive/depart alerts
Text message & email alerts for geofence duration, and geofence-triggered arrival & departure.
Role-based login hierarchy
Various levels of access and editing abilities for administrators, safety managers, dispatchers, and more.
To learn more about Rand McNally Connect Services Portal and request a quote
Call 1-800-641-RAND (7263) or visit randmcnally.com/fleet
©2012 Rand McNally. All rights reserved. “Rand McNally,” “IntelliRoute” are registered trademarks and “TND”and the
arrow design mark are trademarks of RM Acquisition, LLC d/b/a Rand McNally. ©2011 NAVTEQ. NAVTEQ ON BOARD is a
trademark of NAVTEQ.
TRUCK DATA
Third-Party
Application
Integration Modules
Position updates
Share GPS position data & vehicle events such as speeding, idling & hard brakes in near real-time
with third-party applications.
Form messages with Form Sync
Two-way communication & position data is exchanged between the Rand McNally in-cab device and
the third-party application.
Workflow
Consolidate all driver trip information into a single task list format. Includes stops, route information
and required form messages.
Navigation
Integrate driver’s stop assignments into daily Workflow via third-party application.
Automated arrival & departure notifications
Rand McNally Connect obtains trip and location-specific data from the third-party application to
generate geofences around relevant locations. Notifications are sent to the third-party application when
vehicles arrive & depart geofenced locations.
Hours of Service
Integrate relevant driver Hours of Service data, including current duty status and day & week duty status
timers, into a third-party application.
Vehicle Inspection Report
Vehicle Inspection Report information including driver compliance, defects and maintenance issues, is
sent to the third-party application.
Driver & vehicle performance
Driver & vehicle performance metrics are sent to the third-party application. Includes metrics such as
fuel usage, miles driven, cruise control usage, hard braking events, speeding, and event data.
Delivery Methods
Flexible Interface Module
A quick & simple method of integration that utilizes flat file transfers or direct database integrations.
Also useful for archiving data.
Connect SDK
A robust library of standard APIs allow for highly customizable integration to third-party applications.
Compliance
Electronic Hours of Service and Vehicle
Inspection Reporting solutions
8-Day Duty Status Summary
Daily Log Graph
HOS Summary & Timers
Vehicle Inspection Report
HOS Drive-Safe Mode
When fleets invest in a compliance solution their drivers actually
like using, fleets realize their ROI almost immediately.
With Rand McNally’s suite of compliance solutions, drivers benefit from
an accurate, time-saving tool that helps them streamline their daily tasks,
while fleets benefit from improved CSA scores, reduced paper log book
expenses, and simplified, digital recordkeeping.
Compliance
Features
395.15-compliant and beyond
Federal DOT regulatory compliance now and with any upcoming regulations.
Automated duty status updates
Accurate, automatic recording of driving time when the vehicle is in motion.
Duty status timers
Standard 7 and 8-day duty periods (plus timers for the 16-hour rule, and 10-hour and 34-hour resets).
8-day duty status history
Duty status logs of the current 8 day period, including the present day.
Record of duty status graph
Line graph visual of each recorded 24-hour drive period of duty statuses, just like paper logs.
Vehicle Inspection Report
Paperless, itemized in-cab vehicle inspection reports and maintenance reporting via
Rand McNally web portal.
In-cab HOS alerts and warnings for drivers
To-the-minute alerts to driver when running low on driving and on-duty time
with visual and audio cues.
Fleet HOS alerts
Text message or email notifications sent when drivers have reached or exceeded their driving
hour limit.
Fax & email logs
Drivers can send requested logs from the device to law enforcement and transportation officials
during roadside inspections.
Roadside audit view
Displays a protected, simplified view of required log information drivers can activate when
displaying logs on device for law enforcement and transportation officials.
Personal conveyance mode
Fleet-configured capability allowing drivers to use personal conveyance option.
HOS Drive-Safe mode
Simplified, motion-activated interface that displays available driving time in a color-coded
format to minimize driver distraction.
Driver log archive
For web-based access of up to 6 months of driver log data.
Over-the-air updates
As rules and regulations change, the TND 760 and TPC 7600 receive updates “over the air” to eliminate
fleet and driver installation time.
Rand McNally Compliance applications are available on
both the TND™ 760 and TPC 7600 in-cab devices.
To learn more about Rand McNally HOS compliance and request a quote
Call 1-800-641-RAND (7263) or visit randmcnally.com/fleet
©2012 Rand McNally. All rights reserved. “Rand McNally,” “IntelliRoute” are registered trademarks and “TND”and the
arrow design mark are trademarks of RM Acquisition, LLC d/b/a Rand McNally. Wi-Fi® is a registered trademark of the
Wi-Fi Alliance. ©2011 NAVTEQ. NAVTEQ ON BOARD is a trademark of NAVTEQ.
TRUCK DATA
Hours of Service Quick Reference Card
Current Day:
Log Summary and Timers
(Tap HOS > Summary)
8-Day:
Duty Status History
HOS Mode and Log Options
(Tap HOS > Logs)
(Tap HOS > Options)
To update your current
duty status:
• Tap Personal Conveyance to enter
personal conveyance mode.
• Tap Off-Duty to enter
off-duty mode.
• Tap Fax/Email Logs to send logs to
law enforcement.
• Tap S. Berth to enter
sleeper berth mode.
• You can also email your logs to
yourself for record keeping.
• Tap Driving to enter driving mode.
• Tap View Violations to view
recent violations. Must [enter fax#
or email address].
• Tap On-Duty to enter on-duty mode.
• Title lists driver name and
current duty status.
• Refer to black Status Box to view
your current driving availability.
• Tap Today’s log to view the graph
version of the current day’s driving
(see Daily Logs Graph).
Note: You can also update your current duty
status on the Logs, DVIR and Options tabs.
Tap Trip Info to update your
current trip information:
• Load #
• Co-driver
• Trailer
• Other remarks
Title lists driver name and current duty status.
indicates the currently selected day.
indicates the driver has certif ied his logs.
Date:
date of 24-hour log period
Miles:
# miles driven in 24-hour log period
Off-Duty: time in off-duty mode
S.B.:
time in sleeper berth mode
Driving: time in driving mode
On-Duty: time in on-duty mode
Roadside Audit and Personal
Conveyance Modes:
• Tap Change Mode, then Roadside
Audit before showing logs to law
enforcement.
• Tap Normal to exit
Roadside Audit mode.
• Enter your Driver ID.
Request Most Up-to-Date
Information:
• Tap Request Logs to view
up-to-date logs.
• Tap Request Last DVIR to view
last recorded Daily Vehicle
Inspection Report.
WARNING
TND103111_0001_v1
Daily Log Graph:
Duty Status List
Duty Status Totals Summary Duty Trip Info
(Tap HOS > Summary > Today’s Log > Graph)
(Tap HOS > Today’s Log > List)
(Tap HOS > Today’s Log > Summary)
(Tap HOS > Today’s Log >Trip Info)
• Tap Edit to make changes to a
non-driving duty status or trip
info entry.
• If log is already certified, tap
View to view details of duty
status or trip info entries.
• Tap Add Duty Status to submit
a duty status change.
• Tap Arrows to scroll through Graph
log of each day for the last 8 days.
• Note: You can also scroll through
Arrows on the List, Summary and
Trip Info tabs.
• Tap << Prev and Next >> to scroll
through day’s duty status or trip
info entries.
• Tap Add Trip Info to enter
information about a previous
trip (load number, trailers,
pre/post trip status or
safety check).
• Tap Certify to certify your
24-hour log as correct.
Note: when authorized you can also
add and edit previous duty statuses/trip
info and recertify your logs on
the List tab.
• Tap Arrows to scroll through duty
status history List of each day for
the last 8 days.
• Tap any entry to view its details.
Duty Status Entries:
Time:
Status:
time of duty status entry
type of duty status
(Off-Duty, Sleeper Berth, Driving, On-Duty)
Location: location of duty status entry
WARNING
Rand McNally, 106 Hi-Lane, Richmond, KY 40475. Call us 1-800-641-(RAND) 7263 or email us at [email protected]
• Tap Arrows to view Summary of each day
for the last 8 days.
Totals for day:
Off-Duty: off-duty mode
S.B.: Sleeper berth mode
Driving: driving mode
On-Duty N.D.: on-duty,
not driving mode
Miles: total miles driven
Running totals
for day:
• On-Duty: total
on-duty time spent
• 70hr total: how much
driving time in current
70-hour cycle
• Remaining 70hr:
remaining time in
current 70-hour cycle
• Remaining Driving:
remaining driving
time in current
70-hour cycle
• Remaining On-Duty:
remaining on-duty time
in current 70-hour cycle
• Tap Arrows to scroll through Trip Info
of each day for the last 8 days.
Co-Driver(s):
Trailer(s):
BOL(s):
Truck #:
Total Miles:
Personal Miles:
co-driver name
trailer ID
bill of lading number
tractor number
total miles driven
total miles driven
in personal
conveyance mode
© 2011 Rand McNally. All rights reserved. Specifications are subject to change
without notice. Rand McNally endeavors to ensure that the information in
this document is correct and fairly stated, but Rand McNally is not liable for
any errors or omissions. Published information may not be up to date, and it is
important to confirm current status with Rand McNally. The technical data may
be subject to U.S. and international export, re-export or transfer (export) laws.
Diversion contrary to U.S. and international law is strictly prohibited.