Lampshades - Mayfield Lamps

Mayfield Lamps Pty Ltd. Since 1945
Mayfield
PtyVic
Ltd.
Since 1945
22 Viewtech
PlLamps
Rowville
Australia
3178
22 Viewtech Pl RowvilleP:Vic
Australia
3178
+61
3 9755 7244
P:
F: +61
+61 3
3 9755
9755 7244
7266
F: +61 3 9755 7266
mayfieldlamps.com.au
mayfieldlamps.com.au
Lampshades
Mayfield have been hand making
beautiful lampshades in Melbourne
since 1945. With a list of 70+
standard lampshade shapes and
sizes, available in a range of 45+
stock fabrics we are the oldest and
largest lampshade manufacturer in
Australasia. Lampshades can be
made quickly from our standard size
range or completely custom made to
your specific size and in almost any
supplied fabric.
Mayfield Lamps Pty Ltd. Since 1945
22 Viewtech Pl Rowville Vic Australia 3178
P: +61 3 9755 7244
F: +61 3 9755 7266
mayfieldlamps.com.au
Basic Shapes
Example: 14.16.12 C1 White
T = 14”
H = 12”
*
Cylinder
*
*
Oval
*
Tapered Oval
t
Square
t
Rectangle
Drum
B = 16”
*
A Line Drum
*
*
Round Cornered
Square
* Round
Tapered Square
t
t
Empire
Cornered
Rectangle
Tapered Rectangle
*Available in stock & custom sizes
t
Available in custom sizes only
How To Measure
All our lampshades are measured in inches and are listed in
the same format:
Top . Bottom . Height
(slant height, not vertical height).
Example: 14.16.12 C1 White
T = 14”
H = 12”
To measure your existing shade or to design a new one
simply follow the same format.
T = Top diameter
B = Bottom diameter
H = Height (slant height, not vertical height)
Example: 14.16.12 C1 White
The top diameter is 14”, the bottom diameter is 16”, the
slant height is 12” and the fabric is our own C1 White Linen.
For Square, Rectangle and Oval shades, both length and
depth measurements will need to be provided instead of
diameters.
B = 16”
Mayfield Lamps Pty Ltd. Since 1945
22 Viewtech Pl Rowville Vic Australia 3178
P: +61 3 9755 7244
F: +61 3 9755 7266
mayfieldlamps.com.au
The right size for the right base
Our lampshades are available in 70+ standard shapes and sizes or in your specific,
made to order size. How do we choose the right size shade? Put simply, the
taller the lamp, the larger the shade. The diameter of the lampshade is the most
important dimension in choosing your ideal size. The bottom of the shade should
be wider than the widest part of the lamp base, but not more than the lamp base
height.
16” - 22”
12” - 16”
Lamp Type Shade Diameter
Bedside Lamp
6” - 14”
Table Lamp
12” - 16”
Floor Floor 16” - 22”
6” -14”
Bedside Lamp
Table Lamp
Floor Lamp
Fitting Types
Base fit, Drop fit, Top fit, Finial fit, Euro fit, Harp, Clip on, Diffuser bowl......our Lampshades can be made with
a mind numbing number of different fitting types. As standard, our lampshades are made with a 29mm fitting raised 38mm (1.5”) up from the bottom of the shade to suit the Australian standard BC22 Bayonet style
lampholder. All other fitting types are available by custom order.
Base Fit
O29mm to suit BC22
Bayonet lampholder
standard on all Cylinder,
Square & Rectangle
shades. Optional O40mm
to suit E27 lampholder
(Euro)
Top Fit
O29mm to suit BC22
Bayonet lampholder.
Optional O10mm to suit a
harp or suspension kit.
Optional O40mm to suit
E27 lampholder (Euro)
1.5”
Raise
1.5”
Down
Drop Fit
O29mm to suit BC22
Bayonet lampholder
standard on all
Tapered shades.
Optional O40mm to
suit E27 lampholder
(Euro)
Clip On
Wire fitting to fit over small
candle or fancy round
light bulb, standard on our
smallest shades
1.5”
Raise
Mayfield Lamps Pty Ltd. Since 1945
22 Viewtech Pl Rowville Vic Australia 3178
P: +61 3 9755 7244
F: +61 3 9755 7266
mayfieldlamps.com.au
Fabric
Lampshades can be made in any of our 45+
stock fabrics or in your own supplied fabric or
wallpaper.
All our stock fabric shades have a colour
matched fabric tape finish, or can be optioned
with a neat rolled edge finish.
Most fabrics are suitable for making
lampshades. If in doubt, send us a sample and
we will advise, but not guarantee, it’s suitability.
Lampshades in customer supplied fabric will be
made with a rolled edge finish, while wallpaper
shades will be made with a fabric tape finish
selected from our C1 colour range.
Fabric Tape Finish
Example:Metreage:
14.16.12 C1 14.16.12
White
Fabric
Drum Shade
T = 14”
H = 12”
When supplying your own fabric, fabric
metreage is calculated at 3.5 x the bottom
diameter of the shade. Assuming a standard
fabric width of 137cm, this will be enough to
make 1-2 lampshades. Fabric must be sent on
a roll to prevent permanent creasing and any
excess fabric will be returned along with the
finished shades.
Rolled Edge Finish
Lampshade Pattern
Lampshade Pattern
B = 16”
16” (40.6cm) x 3.5 = 56” (142cm)
142cm (56”)