Sony ECM-MS907 Service Manual, Version 1.2
Transcription
Sony ECM-MS907 Service Manual, Version 1.2
ECM-MS907 SERVICE MANUAL US Model Canadian Model AEP Model E Model Ver 1.2 2001. 06 With CORRECTION-1 (9-923-074-91) SPECIFICATIONS ELECTRET CONDENSER STEREO MICROPHONE 9-923-074-12 Sony Corporation 2001F0200-1 © 2001.6 Personal Audio Company Shinagawa Tec Service Manual Production Group SECTION 1 GENERAL Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270°C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. This section is extracted from instruction manual. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. –2– Ver 1.2 2001.06 SECTION 4 EXPLODED VIEW NOTE : r -XX, -X mean standardized parts, so they may have some difference from the original one. r Items marked “ * ”are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. r The mechanical parts with no reference number in the exploded views are not supplied. r Hardware (# mark) list and accessories and packing materials are given in the last of this parts list. 5 6 #2 #1 7 #1 24 23 8 #3 P1 25 22 20 4 10 9 21 11 MIC2 19 12 18 2 13 3 #3 26 17 11 MIC1 14 26 15 16 1 Ref. No. ––––––– 1 2 3 4 5 Part No. ––––––– 2-545-022-01 2-542-250-01 2-545-021-01 2-545-045-01 2-545-020-01 Description –––––––––– COVER, SHIELD SUSPENDER BRACKET, MICROPHONE HOLDING SCREEN, WINDOW SCREEN, SIDE 6 7 * 8 9 10 2-545-018-01 2-545-025-01 2-135-236-01 2-545-024-01 2-545-027-01 NET, SIDE COVER, SWITCH BUSHING CHASSIS CAP 11 12 13 14 15 2-532-252-01 3-701-442-01 2-545-028-01 2-532-251-01 2-532-261-01 SCREW, HOLDER WASHER, POLYETHYLENE HOLDER JOINT NUT, JOINT 11 Remark ––––––– Ref. No. ––––––– 16 17 18 19 20 Part No. ––––––– X-2542-139-1 2-545-023-01 2-544-798-01 2-544-797-01 3-831-441-01 Description –––––––––– GRIP ASSY, HOLDER GRIP TERMINAL, MINUS TERMINAL, PLUS CUSHION * 21 22 23 24 25 A-4542-426-A 2-532-245-01 2-545-030-01 3-007-144-01 X-2542-137-1 AMPLIFIER BOARD, COMPLETE SPRING WINDOW, LED SHEET, BLIND MIC CASE ASSY 3-701-442-21 8-814-271-00 8-814-271-10 1-790-508-11 WASHER, 4.5 MICROPHONE, BUILT-IN CU14-01A MICROPHONE, BUILT-IN CU14-02A CORD, MICROPHONE (2 CORE) (MIC OUT) 26 MIC1 MIC2 P1 –9– Remark –––––– ECM-MS907 Ver 1.2 2001.06 SECTION 5 ELECTRICAL PARTS LIST AMPLIFIER NOTE : r Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. r -XX, -X mean standardized parts, so they may have some difference from the original one. r RESISTORS All resistors are in ohms METAL : Metal-film resistor METAL OXIDE :Metal oxide-film resistor F : nonflammable r Items marked “ * ”are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. Ref. No. ––––––– * r SEMICONDUCTORS In each case, u : µ , for example : uA.... : µ A.... , uPA.... : µ PA.... uPB.... : µ PB.... , uPC.... : µ PC.... uPD.... : µ PD.... r CAPACITORS uF : µ F r COILS uH : µ H Part No. Description ––––––– –––––––––– A-4542-426-A AMPLIFIER BOARD, COMPLETE ************************** Remark ––––––– Ref. No. ––––––– R14 R15 R16 R17 R18 2-532-245-01 SPRING < CAPACITOR > C1 C2 C3 C4 C5 1-164-360-11 1-164-360-11 1-128-309-11 1-128-309-11 1-128-309-11 CERAMIC CHIP CERAMIC CHIP ELECT ELECT ELECT 0.1uF 0.1uF 4.7uF 4.7uF 4.7uF 20% 20% 20% 16V 16V 6.3V 6.3V 6.3V C6 C7 C13 C14 C15 1-164-360-11 1-104-908-11 1-162-970-11 1-162-964-11 1-162-964-11 CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 47uF 0.01uF 0.001uF 0.001uF 20% 10% 10% 10% 16V 4V 25V 50V 50V C16 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V Description –––––––––– METAL GLAZE METAL CHIP 1-216-833-11 METAL CHIP 1-216-817-11 METAL CHIP 1-216-824-11 METAL CHIP 2K 1.8K 5% 5% Remark –––––– 1/16W 1/16W 10K 470 1.8K 5% 5% 5% 1/16W 1/16W 1/16W S1 1-762-894-11 SWITCH, SLIDE (POWER) ************************************************************ MISCELLANEOUS ************** MIC1 MIC2 P1 8-814-271-00 MICROPHONE, BUILT-IN CU14-01A 8-814-271-10 MICROPHONE, BUILT-IN CU14-02A 1-790-508-11 CORD, MICROPHONE (2 CORE) (MIC OUT) ************************************************************ ACCESSORIES & PACKING MATERIALS ******************************** 8-719-989-22 LED CL-150R-CD (POWER) 2-545-083-01 PORCH, CARRYING 3-858-569-11 MANUAL, INSTRUCTION (ENGLISH,FRENCH, GERMAN,SPANISH,DUTCH,ITALIAN) < JUMPER RESISTOR > JC1 Part No. ––––––– 1-218-271-11 1-216-824-11 < SWITCH > < DIODE > D1 When indicating parts by reference number, please include the board. 1-216-295-00 METAL, CHIP 0 5% 1/10W ************************************************************ < TRANSISTOR > ********************* Q1 Q2 Q3 Q4 8-729-230-63 8-729-230-63 8-729-230-63 8-729-230-60 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR HARDWARE LIST 2SC4116-YG 2SC4116-YG 2SC4116-YG 2SA1586-YG ********************* #1 #2 #3 < RESISTOR > R1 R2 R3 R4 R5 1-216-831-11 1-216-824-11 1-216-843-11 1-216-819-11 1-216-827-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 6.8K 1.8K 68K 680 3.3K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R6 R7 R8 R9 R10 1-216-827-11 1-216-841-11 1-216-817-11 1-218-482-11 1-216-819-11 METAL CHIP METAL CHIP METAL CHIP METAL GLAZE METAL CHIP 3.3K 47K 470 430 680 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R11 R12 R13 1-216-819-11 METAL CHIP 1-218-271-11 METAL GLAZE 1-216-824-11 METAL CHIP 680 2K 1.8K 5% 5% 5% 1/16W 1/16W 1/16W – 10 – 7-685-203-19 SCREW +RK 2X5 (TYPE 2) 7-685-104-19 SCREW +P 2X6 TYPE2 NON-SLIT 7-685-102-19 SCREW +P 2X4 TYPE2 NON-SLIT ECM-MS907 US Model Canadian Model AEP Model E Model SERVICE MANUAL Ver 1.1 1999.12 CORRECTION - 1 Correct your Service Manual as shown below. Page 9 INCORRECT CORRECT Ref. No. Part No. 12 26 3-701-442-01 WASHER, POLYETHYLENE 3-701-442-21 WASHER, 4.5 Description Remark Part No. Description Remark 3-701-442-21 WASHER, 4.5 (t:0.5) 3-701-442-01 WASHER, POLYETHYLENE (t:0.13) (SPM-99055) Sony Corporation 9-923-074-91 Personal Audio Division Company 1999L0274-1 Printed in Japan © 1999.12 Published by General Engineering Dept. ECM-MS907 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 1.2 2001.06 Change of the “cord, microphone” (P1). 1.1 1999.12 CORRECTION-1 1.0 1997.02 New (SPM-01015)