software installation

Transcription

software installation
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
USER MANUAL
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
CONTENTS
INTRODUCTION ...................................................................................................................................... 1
FEATURES .........................................................................................................................1
SYSTEM REQUIREMENTS.....................................................................................................1
PACKAGE CONTENTS..........................................................................................................1
REGULATORY COMPLIANCE.................................................................................................1
SUPPORTED DISPLAY RESOLUTIONS: .................................................................................................. 2
DEVICE INSTALLATION ON MAC OSX ................................................................................................... 3
¾ SOFTWARE INSTALLATION .............................................................................................3
¾ MAC HARDWARE INSTALLATION ....................................................................................5
¾ DEVICE UNINSTALLATION ON MAC OSX .........................................................................7
DEVICE INSTALLATION WINDOWS 2000/XP ......................................................................................... 8
¾ SOFTWARE INSTALLATION ...........................................................................................8
¾ WINDOWS 2000/XP HARDWARE INSTALLATION ............................................................9
¾ VERIFYING DEVICE DRIVER INSTALLATION IN WINDOWS 2000/XP ..................................12
¾ DEVICE DRIVER UN-INSTALLATION IN WINDOWS 2000/XP SYSTEM ................................13
DEVICE INSTALLATION ON WINDOWS VISTA SYSTEM ......................................................................... 14
¾ SOFTWARE INSTALLATION .........................................................................................14
¾ HARDWARE INSTALLATION ON WINDOWS VISTA SYSTEM ...............................................15
¾ VERIFYING DEVICE DRIVER INSTALLATION IN WINDOWS VISTA .......................................17
¾ DEVICE DRIVER UN-INSTALLATION IN WINDOWS VISTA ..................................................18
FUNCTION DESCRIPTION ..................................................................................................................... 19
“Primary” Mode........................................................................................................................20
“Extended” Mode (Default)...................................................................................................20
“Mirror” Mode...........................................................................................................................21
“OFF” Mode ..............................................................................................................................21
Rotation......................................................................................................................................21
Q&A.................................................................................................................................................... 22
TROUBLESHOOTING TIPS .................................................................................................................... 23
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
INTRODUCTION
Thank you for purchasing the SEE2 XTREME. The flexibility and universality of USB
2.0 technology makes it un-necessary to open your computer. The SEE2 XTREME
enables you to connect one or more display devices (CRT/LCD monitor, projector) to
your PC or MAC. The connected display can act as mirrored or extended desktop of
the main display on your computer. Turn your monitor sideways, and enable portrait
mode for easier web and print viewing.(PC Only)
FEATURES
Š
Š
Š
Š
Š
Š
Resolution support up to 1920 x 1200
Primary, Extended, Mirror and Rotated modes (Rotation is PC Only)
Supports multiple display devices on one PC
USB 2.0 compliant
Plug-and-Play compliant
Windows OS 2000 SP4 / Windows XP SP2 / Windows Vista / Mac OSX
※ Please note that you can install up to six SEE2 XTREME units on one PC at
the same time, and up to 4 SEE2 XTREME units on a MAC
SYSTEM REQUIREMENTS
PC Requirements
Š Windows OS 2000 SP4 /Windows XP SP2 / Windows Vista
Š USB 2.0 port
Š Pentium 4/Celeron family or AMD K6/Athlon/Duron family with 1.5GHz
„ Single SEE2 XTREME: 256MB RAM or Higher;
„ Multiple SEE2 XTREME Units: 512MB RAM or Higher
Mac Requirements
Š MacOS 10.4 or later.
„ (OSX 10.4.11 or 10.5.2 is recommended)
Š 1.5GHz or faster CPU, 512mb of ram
PACKAGE CONTENTS
Š
Š
Š
Š
Š
SEE2 XTREME
DVI to VGA Converter
USB 2.0 Cable
CD with User Guide and Installation Driver
Quick Start Guide
REGULATORY COMPLIANCE
Š FCC / CE / C-tick / VCCI
1
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
SUPPORTED DISPLAY RESOLUTIONS:
PC
MAC
VGA
VGA
1920X1200
16
16
1920X1080
16
16
1600X1200
16/32
16/32
1680X1050
16/32
16/32
1400X1050
16/32
16/32
1440X900
16/32
16/32
1280X1024
16/32
16/32
1280X960
16/32
16/32
1280X800
16/32
16/32
1280X768
16/32
16/32
1152X864
16/32
16/32
1024X768
16/32
16/32
800X600
16/32
16/32
Rotation
16/32
N/A
Resolutions Supported
2
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
DEVICE INSTALLATION ON MAC OSX
¾ Software Installation
Installing the device driver enables your computer’s operating system to recognize the
SEE2 XTREME. Please check what operating system you are using, and ensure you
are referring to the appropriate installation procedure before you begin installing.
Please make sure the SEE2 XTREME is unplugged from your Mac Desktop or Mac
Notebook before executing the setup program. This section illustrates the simple
device driver installation procedure for computer running Mac OSX
Step 1.
Insert the Driver CD into the CDROM drive; navigate to the disk, and
run the .dmg file
Step 2.
Driver Installer window
Click “Continue” to proceed
* Version number listed in manual may not
match version number on disk
3
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 3.
Choose Install Location – You can
click the”Change Install Location”
button, or you can click “Install” to
use default install location
*Disk space usage listed in manual may
not match size displayed in installation
program
Step 4.
From within the “Change Install
Location” menu, select the
destination you wish to use. Click
continue to install
Step 5.
Click “Restart” to complete the
software installation
4
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
¾ MAC Hardware Installation
Step 1
Connect the external display
device (monitor/projector) to the
DVI connector of SEE2 XTREME
and ensure the display device is on
Step 2
Plug the SEE2 XTREME into an
available USB 2.0 port of your Mac
Desktop or Mac Notebook.
The
screen will turn on automatically, and be
in “Mirror Mode”
Step. 3
To change the mode to “Extended”, go
to the Finder, and then System
Preferences
5
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
From system preferences, click
on the “Display”tab, you will see
this screen.
To Un-Mirror the screens, click on
the “arrangement” tab, and
uncheck the “mirror display”
checkbox. You will automatically
see another window appear on
the screen that represents the
SEE2 XTREME
On this screen, you can adjust
the resolution and color range of
the See2 XTREME
If you cannot see the Display
window to adjust your secondary
monitor resolution, click on the
“gather windows” button
To simplify using the SEE2,
checkmark the “show displays in
menu bar” checkbox.
You will see this display icon that
you can double-click on at any
time.
6
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
¾ DEVICE UNINSTALLATION ON MAC OSX
Step 1
Unplug the See2 from the USB port
Step 2
Run Uninstallation program that is included in .dmg file
Step 3
reboot Computer
7
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
DEVICE INSTALLATION WINDOWS 2000/XP
¾ SOFTWARE INSTALLATION
Installing the device driver enables your computer’s operating system to recognize the
SEE2 XTREME. Please check what operating system you are using, and ensure you
are referring to the appropriate installation procedure before you begin. Please make
sure the SEE2 XTREME is unplugged from your PC or Notebook before executing
the setup program. This section illustrates the simple device driver installation
procedure for computer running Windows 2000 / XP operating system.
Step 1.
Insert the Driver CD into the CD-ROM
drive; the setup program should
launch automatically. If the setup
program does not begin
automatically, click Start, Run and
type “D:\Setup.exe” (where D: is the
path of your CD-ROM drive). You can
also access it from My Computer
Driver Installation Wizard, click “Next”
to continue.
Step 2.
License Agreement; please review
and select “I accept the terms of
the license agreement.” Click
“Next” to accept the License
Agreement.
Step 3.
The Microsoft Software Installation
Certificate warning dialogue box
will be displayed under Windows
XP OS up to 6 times. Please
select “Continue Anyway” to
continue with the device driver
installation. This will not affect the
device driver installation or usage.
The Microsoft Certificate warning
dialogue boxes will not appear when
the driver receives the WHQL
certification.
8
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 4.
Click “Finish” to exit the Driver
Wizard.
Step 5
Reboot your computer
¾
WINDOWS 2000/XP HARDWARE INSTALLATION
Step 1
Connect the external display device (monitor/projector) to the DVI / VGA connector of
the SEE2 XTREME and ensure the display device is on
Step 2
Plug the SEE2 XTREME into an
available USB 2.0 port of your PC or
Notebook.
Then, it will show the
Hardware Installation Wizard, please
select “No, not this time” for checking
windows update, and click “Next”
Step. 3
Select “Install the software
automatically (Recommended)”. Click
“Next” to continue
9
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 4
Please select “Continue Anyway” to
continue with the installation.
It will
not affect the device installation and the
device usage
* The Microsoft Certificate warning
dialogue boxes will not appear when
the driver receives the WHQL
certification.
Step 5
Click “Finish” to close the wizard
Step 6
Please select “Continue Anyway” to
continue with the device driver
installation.
It will not affect the device
driver installation and the device usage
* The Microsoft Certificate warning
dialogue boxes will not appear when
the driver receives the WHQL
certification.
10
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 7
Please select “Continue Anyway” to
continue with the device driver
installation.
It will not affect the device
driver installation and the device usage
* The Microsoft Certificate warning dialogue
boxes will not appear when the driver
receives the WHQL certification.
Step 8A
FOR MULTIPLE SEE2 XTREME UNITS
Please select “No, I will restart my
computer later.” and click “Finish”
to continue the installation of next
SEE2 XTREME.
Step 8B
For SINGLE SEE2 XTREME
Please select “Yes, I want to restart
my computer now.” and click “Finish”
to complete the driver installation.
※Repeat the Hardware Installation Procedure Step 1 - 7 and 8 A for all additional SEE2
units, then after all units are installed, move on to 8 B. Ensure that all units are connected
to monitors that are powered on..
11
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
¾ VERIFYING DEVICE DRIVER INSTALLATION IN WINDOWS
2000/XP
The following procedure allows you to verify the device driver installation. It is
optional, but a useful troubleshooting tool.
Right click “My Computer” → “Properties” → “Hardware” → “Device Manager”.
Double click “Display adapters”, and “Universal Serial Bus controllers”.
‹ The device number is dependant upon how many SEE2 XTREME units are
installed.
12
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
¾ DEVICE DRIVER UN-INSTALLATION IN WINDOWS 2000/XP
SYSTEM
The following procedure allows you to un-install the SEE2 XTREME
device driver.
Step 1 Please make sure the SEE2 XTREME is unplugged from your PC or
Notebook before executing the device driver un-installation program.
Step 2.
Default Windows XP Start menu:
Click “Start” → “Control Panel” →
“Add or Remove Programs”.
Classic start menu:
Click “Start” → “Settings” →
“Control Panel” → “Add or Remove
Programs”.
Select “SEE2 XTREME driver” item.
Click the “Remove” button.
Step 3.
Make sure the SEE2 XTREME is
unplugged from notebook/PC USB port
and click “OK” to continue.
Step. 4
Select “Yes, I want to restart my
computer now” and click “Finish” to
reboot. After reboot, you will complete
the driver un-installation
13
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
DEVICE INSTALLATION ON WINDOWS VISTA SYSTEM
¾ SOFTWARE INSTALLATION
Installing the device driver enables your computer’s operating system to recognize the
SEE2 XTREME. Please check what operating system you are using, and ensure you
are referring to the appropriate installation procedure before you begin.
Please make sure the SEE2 XTREME is unplugged from your desktop or notebook
before executing the setup program. This section illustrates the simple device driver
installation procedure for computer running Windows 2000 / XP operating system.
Step 1.
Insert the Driver CD into the CD-ROM drive; the setup program should launch
automatically. If the setup program does not begin automatically, click Start, Computer,
and double-click the CD drive with our disc in it.
Step 2.
Driver Installation Wizard, click “Next” to
continue
Step 3
License Agreement; review it and check
“I accept the terms of the license
agreement.” Click “Next” to accept the
License Agreement
14
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 4
It will show the Windows Security
warning dialogue box under Windows
Vista, it will not affect the device driver
installation and usage the device. Please
select “Always trust software from
“Magic Control Technology Corp.”,
then click “Install” to continue
Step 5
Setup is searching for installed
features…
Normally, it will take around 2~3
minutes during the period of time
Step. 6
Driver Installation Wizard, click “Finish”
to continue.
¾ HARDWARE INSTALLATION ON WINDOWS VISTA SYSTEM
‹ Installation of Multiple SEE2 XTREME Units in Windows Vista
Step 1
Connect the external display device (monitor/projector) to the DVI / VGA connector of
the SEE2 XTREME and ensure the display device is on.
Step 2
Plug the SEE2 XTREME into an available USB 2.0 port of your PC. The driver
installation will proceed automatically.
15
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
Step 3
Please select “No, I will restart my
computer later.” And click “Finish” to finish
installation for device 1 and continue for
next installation.
※ Repeat steps 1 – 3 for each additional SEE2 XTREME you are connecting to your
computer
※ After connecting your last SEE2 XTREME device, wait for the installation to
complete, you can restart your computer through the installation program, or manually.
‹ Installation of ONE SEE2 XTREME Units
Step 1
Connect the external display device (monitor/projector) to the DVI connector of SEE2
XTREME and ensure the display device is on.
Step 2
Plug the SEE2 XTREME into an available USB 2.0 port of your PC. The driver
installation will proceed automatically.
a.
Please select “Yes, I want to
restart my computer now” to
complete the installation
16
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
¾ VERIFYING DEVICE DRIVER INSTALLATION IN
WINDOWS VISTA
The following procedure allows you to verify the device driver installation. It is optional,
but a useful troubleshooting tool.
Please right click “Computer” → “Properties” → “Device Manager”.
Please double click “Display adapters”, and “Universal Serial Bus controllers”.
‹ The device number is dependeing on how many SEE XTREME units are
installed.
17
SEE2 XTREME
¾
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
DEVICE DRIVER UN-INSTALLATION IN WINDOWS VISTA
The following procedure allows you to un-install the SEE2 XTREME’s device driver.
Please make sure the SEE2 XTREME is unplugged from your PC or Notebook before
executing the device driver un-installation program.
Step 1.
Š Standard menu:
Please click “Start” → “Control
Panel” → “Program and Features”.
Š Classic Start memu:
Please click “Start” → “Settings”
→ “Control Panel” → “Program and
Features”.
Select “See2 XTREME” item. Click
“Uninstall” button.
Step 2.
Click “OK” to continue
Step 3.
select “Yes, I want to restart my
computer now” and click “Finish” to
reboot. After reboot, you will complete the
driver un-installation.
18
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
FUNCTION DESCRIPTION
This section describes the main functions provided by the SEE2 XTREME.
-
The SEE2 XTREME can support
LCD or CRT displays; Either the
VGA or DVI interface can be used
on LCD or CRT monitors. Four
different modes are available for
use: Primary, Extended, Mirror and
Portrait Mode (Rotation) by rightclicking the utility icon (the number
is dependent upon the quantity of
SEE2 XTREME be installed)
- The resolution can be modified via the Utility Icon or Display Properties.
19
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
“Primary” Mode
The system’s main graphics adapter will
automatically switch to act as the
secondary graphics adapter and the
main screen as the extended desktop.
The monitor connected to the SEE2 will
now act as the primary Windows desktop.
Please be advised that display utilities
that shipped with some AGP and built-in
display adapters may prevent this option
from working on some systems. You can
disable the other utility program (usually
found in the same toolbar located on the
bottom right hand corner) to make this
function work properly.
“Extended” Mode (Default)
By default, the monitor connected to SEE2 XTREME will work as, “Extended Desktop”
which extends the primary Windows desktop of your system. You can change the
relative position of this extended desktop under the Display Properties.
20
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADAPTER
“Mirror” Mode
By setting this mode, the Windows desktop
will be mirrored / replicated to the
secondary CRT/LCD monitor. The screen
resolution setting on the secondary monitor
MUST match the primary screen’s
resolution. For example, if the primary
resolution is 1600 x 1200 x 32bit, the
secondary monitor’s resolution will be the
same. If the selected resolution setting is
not supported by the primary screen, a
warning dialogue box will be displayed and
the suggested screen resolution will be
shown.
“OFF” Mode
This option disables
XTREME on the system.
the
SEE2
Rotation
This feature enables setting the orientation of the secondary CRT/LCD monitor. Several
options such as “0 degrees”, “90 degrees”, “180 degrees” or “270 degrees” are
available under the Extended or Primary mode.
21
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADPATER
Q&A
This section describes the common Q&A regarding the installation and operation of the
SEE2 XTREME.
Q: Why can’t I make the SEE2 XTREME the primary display?
A: Some video cards ship their product with a utility that prevent other video cards
from being set as the primary card. Check the bottom right hand corner taskbar for
the utility. Disable the utility before switching our adapter to be the primary display.
Q: Why won’t my DVD player work when I move it over to the extended display?
A: Some DVD playback software packages do not support playing on a second
display adapter of any kind. Sometimes opening the program in the secondary
display before before playing the DVD can help this.
Q: How come my video will not play on Media Player if I move it over to the extended
desktop?
A: Ensure that you have moved the Media Player window completely over to the
second screen, if it is overlapping both screens, this will affect playback
Q: Why does my mouse not move pass the right side of the screen as it should on
extended desktop?
A: Check the display settings and make sure that your displays are oriented correctly.
You have to tell your computer how the monitors are physically positioned on your
desk. From Control Panel \Display Properites(see page 17 for example), click the
“Identify Monitors” button, you will see how the computer has numbered the monitors.
If this does not match how your computer has them oriented on “display properties”,
you must drag-and-drop the monitors in display properties so that the numbers are
oriented the same as displayed when you click the “Identfy Monitors” button.
Q: There are lines running horizontally up and down my screen.
A: This is due to a low refresh rate setting. You can change this in the Display
Properties Settings Advanced Monitor. Make sure you select the USB 2.0 VGA
Device first and not set the refresh rate higher than what your monitor can support.
This may damage your monitor. You can also try to reset/refresh/resynchronize your
monitor.
Q: Direct3D does not work?
A: This is a current limitation of the adapter. Please check for driver updates in the
future to add support for this. If your application requires this, please use the main
display adapter.
Q: Why won’t the Adapter work on Windows Vista 64 bit version?
A: Currently, the driver is compatible with Windows Vista 32 bit version only. Please
check for the driver updates in the future.
22
SEE2 XTREME
USB 2.0 DVI EXTERNAL VIDEO ADPATER
TROUBLESHOOTING TIPS
The following troubleshooting tips may help if you are experiencing any difficulties
using our device. Contact your dealer for additional assistance if needed.
- Check to make sure that all connectors are plugged in correctly.
- Make sure that the USB port that you are using is USB 2.0.
- Try a different USB 2.0 port and/or computer
- Check to see that the monitor is connected correctly and the power is ON.
- Try connecting the adapter directly to the computer instead of through a hub, port
replicator, or docking station.
- Unplug all other USB devices from the system.
- Make sure to restart your computer after the driver installation.
- Unplug the adapter, wait a minute, then re-insert it.
- Check the website to make sure you have the latest drivers.
- Reset/refresh/resynchronize your monitor.
- For optimal video playback, alternate third-party video player may work better. We
do not endorse one in particular; however several quality players are available for
free.
- Selecting Primary Mode may disable the main system display on certain Intel
graphics solution equipped computer systems.
- If you have problems during the boot up process, start your computer in Safe
Mode and uninstall the driver. Hold the CTRL key until the Windows startup menu
appears and select Safe Mode.
Copyright© 2008 Tritton Technologies Inc. All rights reserved. All trade names are registered
trademarks of their respective owners. Features and specifications are subject to change without notice.
Product may not be exactly as shown in the diagrams.
23