GUIDING CATHETER INNER CATHETER

MicroVention Terumo | Guiding Catheter System
GUIDING CATHETER
Distal Flexible Length – 7cm
Guiding Catheter Shapes
CHAPERON GUIDING CATHETER
Size
ID
Catheter
Length
Distal Flex.
Length
5F
0.059”
(1.50mm)
95cm
7cm
6F
0.071”
(1.80mm)
95cm
7cm
STR
Inner Catheter Shapes
MP2
BUR
VTR
JB2
INNER CATHETER
Braid-Reinforced Proximal Shaft – 102cm
Guiding Catheter
Shapes
CHAPERON INNER
CATHETER
Hydrophilic Coating – 15cm
Inner Catheter Shapes
Size
Id
Catheter
Length
Distal Flex.
Length
Hydrophilic
Coating
Length
Max.
Injection
Pressure
4F
0.041”
(1.03mm)
117cm
STR
7cm
MP1
15cm
MP2
750psi
BUR
5F
0.048”
(1.22mm)
117cm
7cm
15cm
1000psi
VTR
JB2
SIM2
5F Guiding Catheter comes with 4F Inner Catheter
6F Guiding Catheter comes with 5F Inner Catheter
Bundled and ready-to-use, Chaperon’s inner catheter is designed exclusively for the guiding catheter.
It’s the only integrated system of its kind available.
MicroVention, Inc.
Worldwide Headquarters
microvention.com
1311 Valencia Ave.
Tustin, CA 92780 USA
PH+1.714.247.8000
PH 1.800.990.8368
MicroVention UK Limited
MicroVention Europe, S.A.R.L. MicroVention Deutschland GmbH
Suite 3, The Barracks Building
10 Cliffords Fort, North Shields
Tyne and Wear, NE30 1JE UK
PH +44 (0) 191 258 6777
F +44 (0) 191 258 5999
30 bis, rue du Vieil Abreuvoir
78100 Saint-Germain-en-Laye
France
PH +33 (1) 39 21 77 46
F +33 (1) 39 21 16 01
Berliner Allee 61D-40212
Dusseldorf
Germany
PH +49 211 210 798-0
F +49 211 210 798-29
MICROVENTION and Chaperon are registered trademarks of MicroVention, Inc. • Scientific and clinical data related to this document are on
file at MicroVention, Inc. Refer to Instructions for Use for additional information. © 2012 MicroVention, Inc. MM146(I) Rev.C 09/12
SIM2
Integrated Catheter System with Greater Support and Lumen Area
Largest ID
• Thin PTFE layer and flat wire braid
creates increased lumen diameter
• 5F - 0.059” 6F - 0.071”
• Allows for multiple catheter usage (6F)
ID
INNER CATHET
ER
guiding catheter features
5F - 0.059”
6F - 0.071”
Maximum Control & Maneuverability
• Increased kink resistance
• Greater torque transmission and superior
maneuverability
ETER
H
T
A
C
g
in
guid
MicroVention Terumo | Guiding Catheter System
featuring A large LUMEN with a
unique inner catheter for rapid atraumatic access
Finally, a guiding catheter that is available as a completely
integrated system. The only guiding catheter system
inner catheter features
bundled with an inner catheter designed exclusively as
Improved Vessel Access Safety
a single ready-to-use unit. No other guiding catheter
•S
oft, conformable tip contains no braiding
in distal 15cm
can match its large inner diameter design.
• Radiopacity for precise placement
• Several tip configurations available
• Can be used for diagnostic treatments
OPTIMAL Shape Configurations
• 4F - 750 PSI 5F - 1,000 PSI
The co-axial system with multiple tip configurations optimizes shape
with vessel anatomy, improving placement and stability. Because
the inner catheter provides you with appropriate curve selections
for advancement of the system, you can select a more suitable
curve on the guiding catheter.
Soft Inner Catheter with
Hydrophilic Coating
• Increased trackability
• Sustained lubricity
• Facilitates atraumatic navigation in small,
distal vasculature
• Allows smooth advancement of
guiding catheter over inner catheter
Inner catheter integrated system with locking mechanism
• Inner catheter provides gradual
transition from guidewire to largelumen guiding catheter
0.035” Guidewire
Inner Catheter
Guiding Catheter
Guiding Catheter
• Locking system combines the two
catheters for easy advancement
• Longer radiopacity for safe
distal positioning
Locking System