Our solutions for the mining industry

Comments

Transcription

Our solutions for the mining industry
D-109322-2013
D-114566-2013
Our solutions for the mining industry
LOREM
LOREMIPSUM
IPSUM
® ®
2.2.ÜBERSCHRIFT
ÜBERSCHRIFT
3.3.Überschrift
Überschrift
Lorem
Loremipsum
ipsum
Lorem
Loremipsum
ipsumOO
2 2
1
1
Fußnote
Fußnote
dies
diesististeine
einelange
langeBeschreibung
Beschreibung
über
übermehrer
mehrerZeilen
Zeilen
die
dieweiteren
weiterenPunkte
Punktesind
sindalle
alledurch
durch
eine
eineLinie
Liniegetrennt
getrennt
der
derZeilenabstand
Zeilenabstandististimmer
immer
gleichbleibend
gleichbleibend9,5
9,5ptpt
esesgibt
gibtkeine
keineuntersch.
untersch.ZeilenabZeilenabstänstände
de mehr
mehr
Ullamcorper
Ullamcorpersuscipit
suscipitlobortis
lobortis1010
%%
Hauptüberschrift
Optionale zweite Zeil
Lorem ipsum dolor sit amet, consec
nonummy nibh euismod tincidunt ut
volutpat. Ut wisi enim ad minim veni
LOREM ISPUM DOLOR CONSECTUER
Lorem ipsum dolor sit amet, consectetuer ad
elit, sed diam nonummy nibh euismod tincidu
laoreet dolore magna aliquam erat volutpat. U
enim ad minim veniam, quis nostrud exci tatio
ullamcorper suscipit lobortis nisl ut aliuip com
consequat. Duis miri Lorem ipsum dolor sit a
consectetuere adipiscing lit, diam nonummy n
euismod tincidunt laoreet dolore magna
aliquam erat volutpat. Ut wisi eni ad minim ve
quis nostrud eci tation ullamcorper suscipit la
lobortis nisl ut aliquip ex ea commodo conse
D-112284-2013
Lorem ipsum® dolor
In vulputate velit esse molestie consequat, ve
dolore feugiat nulla facilisis at vero et accum
san et iusto odio dignissim qui bndit praesen
tatum zzril delenit augue duis dolore te feuga
nulla facilisi. Lorem ipsum dolor sit a, consec
adipising elit, sed diam nonummy nibh euism
tation ullamcorper suscipit loborisl ut aliquip
commodo consequat.
Lorem ipsum dolor sit amet, consectetuer ad
elit, sed diam nonummy nibh euismod tin
dunt ut laoreet dolore magna aliquam erat vo
Nam liber tempor cum soluta nobis eleifend
congue imperdiet doming placerat possim as
03 |
04
D-13180-2014
1 Fitness for duty
06
2 M
ine exploration, planning
and construction
08
10
D-13180-2014
4 U
nderground mining of
metal/non-metal
12
D-13180-2014
5 Underground mining of coal 14
D-13180-2014
6 P
rocessing and Refining
16
D-13180-2014
7 Emergency Escape
18
D-13180-2014
8 E
mergency Response
and Rescue
20
D-103259-2013
3 Opencast Mining
9 C
leaning, Disinfection,
Maintenance
22
D-13180-2014
D-13180-2014
Introduction D-13180-2014
INDEX
10 Y
our Service needs &
requirements
24
04 |
We keep
mines
running
3
8
9
10
5
D-13180-2014
2
7
6
1
4
| 05
Over 100 years of experience matters!
There are few industries where safety plays such an important role as in mining.
Every step must be carefully planned and every decision is critical to ensure efficient
and safe mining operation.
For over 100 years, no other company has committed
more to miner‘s health and safety than Dräger. For
generations, miners have relied on Dräger to provide
quality products to protect their lives.
The history of Dräger and that of mine rescue date
back to 1903 when Bernhard Dräger devised the first
breathing apparatus during a physiological self-test
after the mine disaster in Nova Scotia, Canada. The
first documented application of oxygen rebreathers,
the Dräger breathing apparatus, for work and rescue
in the mining industry was during the devastating
mine disaster in 1906 in Courriers, France. The new
possibilities offered by Dräger’s breathing apparatus
paved the way for the emergence of a completely
new profession “mine rescue”. In North America,
mine rescuers are called “Drägerman”, even today.
The further development of breathing apparatus for
the mining industry was represented by the Dräger
Model 1924, which dominated the market for over
ten years with its long duration breathing protection
for up to two hours. In 1963, the Dräger BG 174
was introduced and has been used for over 40 years
in underground mine rescue. Today, mine rescue
teams in different parts of the world are equipped
with the new generation of close circuit breathing
apparatus – the Dräger PSS BG4 plus, which has
been developed and constantly improved to provide
the highest breathing protection and the best
possible comfort for up to four hours.
Dräger is proud to have played a role in creating mine
rescue history with these products. To stay abreast
of the evolving requirements in today’s complex work
environment, Dräger supplies a broad spectrum
of safety equipment – from respiratory protection
and gas detection for daily operational safety to
self-contained self rescuers and refuge shelters for
emergency situations. All these products can be
combined and used as an integrated safety concept
to improve mine and workplace safety. In addition,
Dräger also offers a selection of professional service
and support programs, from product maintenance
and inspection to training courses, to meet individual
customer‘s needs.
06 |
FITNESS FOR DUTY
Our solutions for
D-13180-2014
D-93368-2013
Fitness for duty
Dräger Alcotest® 7510
The Dräger Alcotest® 7510 delivers quick and
accurate measurement of breath alcohol concentrations, even at sub-freezing temperatures.
It also allows passive measurement without a
mouthpiece, such as measurement of alcohol
inside an underground vehicle.*
*For law enforcement purposes in the U.S.
Dräger DrugTest 5000
With cutting-edge oral fluid drug testing
technology, the Dräger DrugTest 5000
system allows a discreet and hygienic
approach with reliable and precise testing
results for drug management in the mines.*
D-98733-2013
To enhance your road safety and traffic management
on mine sites, Dräger’s breath alcohol ignition
interlock device can be installed on mine vehicles
to prevent mine vehicle operators from operating
the vehicle under the influence of alcohol.
D-54726-2012
BREATH ALCOHOL IGNITION INTERLOCK DEVICE
To support you to eliminate the inherent risks
associated with drug use and alcohol abuse
from mining operations, Dräger offers a range
of alcohol breathalyzers and saliva based drug
testing equipment for non-invasive alcohol and
drug testing at the workplace.
ST-15093-2008
ALCOHOL AND DRUG TESTING
Dräger Interlock 7000
The Interlock 7000 is a breath-alcohol
measuring instrument with a vehicle
immobilizer, which prohibits a driver from
starting the engine after alcohol consumption.
It works perfectly at -45 °C in cold winter
days and at 85 °C in blazing sunlight.*
ST-15152-2008
| 07
Stationary Training Gallery
Designed and constructed according to
the specific customer requirements, the
Dräger stationary training gallery offers
breathing apparatus users a perfect
platform to practice their tasks under
mental and physical stress situations.
Dräger System 64
For firefighters, live fire training is crucial.
The Dräger System 64 makes owning live
fire training equipment easy and affordable – so now even fire departments with
tight budgets can continually build the
confidence and skills of their firefighters.
ST-13294-2007
For mining operations, Dräger offers tailor-made
systems to facilitate training programs for personnel
involved in certain tasks in their workplace such as
confined space entry. D-37061-2015
TRAINING SYSTEM
For emergency response training programs, Dräger
designs and supplies customized training galleries
to enhance the responder’s skills in areas like
orientation, communication, rescuing casualties
and sharpening reactions relying on senses other
than sight.
ST-612-2006
TRAINING GALLERY
Confined Space Entry (CSE) Trailer
The Dräger CSE trailer facilitates hands-on
training programs, enabling users to get
to know the hazards and dangers associated with working in confined space and be
familiarized with the rescue techniques.
08 |
MINE EXPLORATION, PLANNING AND CONSTRUCTION
Our solutions for
D-8772-2009
D-13180-2014
Mine Exploration,
Planning and Construction
Dräger X-plore® 1700+
Hardly noticeable breathing resistance thanks
to the specially developed CoolSAFE+TM
filter material: The Dräger X-plore® 1700+
particle filtering face pieces provide optimum breathing comfort through minimum
breathing resistance.
Dräger X-am 5600
The Dräger X-am 5600, with a dual infrared
Ex and CO2 sensor, offers the flexibility
of tailor-made configurations to detect up
to six gases including combustible gases
and vapors, oxygen and various toxic
gases specific to the desired application.
D-98773-2013
To warn you against invisible hazardous gases and
oxygen deficiency during core drilling and mine
development, Dräger provides a comprehensive line
of gas detection products tailored to your scope of
work.
D-23637-2009
PORTABLE GAS DETECTION
For health and safety during mine exploration and
construction, Dräger provides a wide range of
respiratory protection masks and protective eyewear
to protect you against fine dust and particles during
exploration drilling and core sampling.
D-50312-2012
RESPIRATORY AND EYE PROTECTION
Dräger X-am 2500
The 1 to 4-gas detector Dräger X-am 2500
is a cost effective multi gas monitor for the
measurement of combustible gases and
vapors, oxygen as well as toxic gases
including H2S, CO, NO2 and SO2.
MT-467-2008
| 09
Combining the innovative technology and the
competencies of Dräger’s gas detection system
engineers, Dräger provides technical support to
help customers to find the best possible systems
to facilitate the ventilation planning of a mine site.
Dräger Refuge Chamber
Thanks to its modular design, the Dräger
Refuge Chamber can be designed in
accordance with the specific needs along
the mine development process to offer
the highest possible protection to the
occupants.
Dräger Polytron 7000
With the possibility to use pre-calibrated
DrägerSensor, the Dräger Polytron 7000
is a virtually maintenance free and intrinsically safe transmitter that can satisfy
all oxygen and toxic gas measurement
applications on a single platform.
MT-5527-2005
SYSTEM
To support you with your planning of emergency
escape strategy, Dräger offers technical support for
emergency escape systems tailored to the specific
needs and requirements during the mine planning
and construction phase.
ST-2448-2003
TECHNICAL SUPPORT FOR GAS DETECTION
ESCAPE SYSTEM
D-19733-2015
TECHNICAL SUPPORT FOR EMERGENCY
Technical support
In addition to a wide range of products
that can be used to support the mine
ventilation and mine emergency escape
plan, Dräger also provides technical
support to ensure the most suited solutions are selected to meet your needs.
10 |
OPENCAST MINING
Our solutions for
D-13180-2014
D-23672-2009
Opencast Mining
Dräger X-plore® 1300/1700 series
Equipped with the specially engineered
CoolMAX™ exhalation valve, the Dräger
X-plore® 1300/1700 series offer effective
protection against fine dust with very low
breathing resistance and allow the user to
stay cool underneath the mask.
Dräger X-plore® 3000 series
Constructed with the Flexi-Fit harness
and X-guided strap system, the Dräger
X-plore® 3000 series ensures optimum
weight distribution and a safe seal
without pressure points, while guaranteeing
a wide and unrestricted field of vision.
D-118996-2013
To mitigate the health risks caused by the dust
generated at opencast mining operations, Dräger’s
protective eyewears provide high level protection of
the most important sensory organ – the eyes.
ST-950-2008
EYE PROTECTION
Whether for blasthole drilling or operating dragline
or other mining machines, Drägers offers a wide
range of high quality respiratory protection masks,
both disposable and reusable, for effective
protection against dust and particulate matters.
D-6416-2009
RESPIRATORY PROTECTION
Dräger X-plore® 8000
Challenging workplace conditions demand
reliable solutions. The Dräger X-plore® 8000
offers a new level of intuitive handling combined with intelligent electronics that provide
the high degree of safety your people need
to focus on the task at hand.
D-115048-2013
| 11
Dräger X-am 2500
The 1 to 4-gas detector Dräger X-am 2500
is a cost effective multi gas monitor for
the measurement of combustible gases
and vapors, oxygen as well as toxic gases
including H2S, CO, NO2 and SO2.
Dräger Pac series 3500/5500/7000
The Dräger Pac series combines fast,
accurate single gas detection with ease
of use and peace of mind. With clear
alarms and a language-free display, each
instrument uses the latest sensor technology
to ensure the most reliable results.
D-19622-2015
For preventive maintenance and compliance with
safety regulations, Dräger’s robust diesel exhaust
gas tester allows emission testing under harsh
mining conditions.
ST-1743-2005kk
DIESEL EMISSION TESTING
To prevent mining accidents and improve mine safety,
Dräger offers a comprehensive line of portable gas
detection products to ensure timely identification of
potential hazards during opencast mining operations.
D-77497-2013
PORTABLE GAS DETECTION
Dräger MSI EM 200-E
Equipped with three electrochemical
sensors, CO, NO and NO2, the Dräger
MSI EM200-E diesel exhaust gas tester
allows accurate measurement of CO
and nitrous fumes in the undiluted diesel
exhaust gas.
12 |
UNDERGROUND MINING OF METAL / NON-METAL
Our solutions for
D-13180-2014
D-23721-2009
Underground mining
of metal/non-metal
Dräger X-plore® 3000 series
Constructed with the Flexi-Fit harness
and X-guided strap system, the Dräger
X-plore® 3000 series ensures optimum
weight distribution and a safe seal without
pressure points, while guaranteeing
a wide and unrestricted field of vision.
Dräger X-dock 5300/6300/6600
The Dräger X-dock series enables
automated and simultaneous tests and
calibration of up to ten instruments at
high speed with low gas consumption
and facilitates the management of
relevant data for subsequent evaluation.
ST-1743-2005kk
For your underground mining operations, Dräger
offers a comprehensive line of gas detection products
to meet the needs of various applications, from
personal air monitoring, fire and explosion prevention
to confined space entry and post blast inspection.
D-47869-2012
PORTABLE GAS DETECTION
Whether for drilling, extracting or loading, Dräger’s
respiratory protection masks and protective eyewear
offer the wearer not only effective protection against
fine dust and particulates, but also simple handling
and high wearing comfort.
ST-950-2008
RESPIRATORY AND EYE PROTECTION
Dräger Pac 7000
The Dräger Pac 7000, with unlimited instrument lifetime and extensive data logging
capabilities, can be used to measure a
variety of gases including CO, CO2, Cl2,
HCN, H2S, NH3, NO, NO2, O2, PH3, SO2
and organic vapors.
D-114525-2013
| 13
Dräger Polytron 7000
With the possibility to use pre-calibrated
DrägerSensor, the Dräger Polytron 7000
is a virtually maintenance free and intrinsically safe transmitter that can satisfy
all oxygen and toxic gas measurement
applications on a single platform.
Dräger Polytron 8000
The microprocessor-based transmitter
can be equipped with various electroche­
mical DrägerSensors, detecting oxygen
or various toxic gases. In addition, it can
be integrated into digital fieldbus systems
providing additional diagnostic functions.
D-19622-2015
For preventive maintenance and compliance with
safety regulations, Dräger’s robust diesel exhaust
gas tester allows emission testing under harsh
mining conditions.
D-15013-2010
DIESEL EMISSION TESTING
For ventilation monitoring of toxic gases underground,
Dräger provides accurate and reliable stationary gas
detection systems to protect the workforce and speed
up post blast clearance.
ST-2448-2003
STATIONARY GAS DETECTION SYSTEM
Dräger MSI EM 200-E
Equipped with three electrochemical
sensors, CO, NO and NO2, the Dräger
MSI EM200-E diesel exhaust gas tester
allows accurate measurement of CO
and nitrous fumes in the undiluted diesel
exhaust gas.
14 |
UNDERGROUND MINING OF COAL
Our solutions for
D-13180-2014
D-114264-2013
Underground mining
of coal
Dräger X-plore® 1700 series
Dräger X-plore® 1700 makes breathing
easy and comfortable by ideally combining
low breathing resistance and high filter
performance in one mask. The CoolMAX™
valve efficiently releases humid and warm
exhaled air to the outside.
Dräger X-plore® 1720+ V Odour
The Dräger X-plore® 1720+ particle filtering
face pieces provide optimum breathing
comfort through minimum breathing
resistance. This odour stopping versions
utilises an additional activated carbon
layer inside against unpleasant odours.
D-13225-2010
For proactive and predictive maintenance,
Dräger’s thermal imaging cameras certified by
ATEX, IECEx and ETL/Intertek facilitate the control
of spontaneous combustion in sealed areas and on
conveyor belts, even in potentially explosive areas
requiring equipment of device category M2 or 2G.
ST-14189-200
THERMAL IMAGING CAMERA
Whether for drilling, shotcreting or loading,
Dräger’s respiratory protection masks and
protective eyewear offer the wearer not only
effective protection against fine dust and
particulates, but also simple handling and
high wearing comfort.
D-50311-2012
RESPIRATORY AND EYE PROTECTION
Dräger UCF 7000
The Dräger UCF 7000 thermal imaging
camera is intrinsically safe (ATEX category
M2 and 2G) and offers the maximum
level of safety and reliability when using
in potentially explosive atmospheres.
D-14567-2014
| 15
Dräger X-am 2500
The 1 to 4-gas detector Dräger X-am 2500
is a cost effective multi gas monitor for
the measurement of combustible gases
and vapors, oxygen as well as toxic gases
including H2S, CO, NO2 and SO2.
Dräger X-am 5600
The Dräger X-am 5600, with a dual infrared
Ex and CO2 sensor, offers the flexibility of
tailor-made configurations to detect up to
six gases including combustible gases and
vapors, oxygen and various toxic gases
specific to the desired application.
D-19622-2015
For preventive maintenance and compliance with
safety regulations, Dräger’s robust diesel exhaust
gas tester allows emission testing under harsh
mining conditions.
D-23637-2009
DIESEL EMISSION TESTING
To warn the underground personnel against hazardous
gases associated with underground coal mining,
Dräger offers a wide range of portable gas detectors
that are ATEX , IECEx and CSA approved for areas
requiring equipment of device category M1 or 1G
and deliver fast, reliable and accurate measuring
performance.
D-77497-2013
PORTABLE GAS DETECTION
Dräger MSI EM 200-E
Equipped with three electrochemical
sensors, CO, NO and NO2, the Dräger
MSI EM200-E diesel exhaust gas tester
allows accurate measurement of CO
and nitrous fumes in the undiluted diesel
exhaust gas.
16 |
PROCESSING AND REFINING
Our solutions for
D-13180-2014
ST-16371-2008
Processing and
Refining
Dräger X-plore® full face masks
The Dräger X-plore® 5500 full face mask
is the right solution for environments
where increased respiratory protection
and a clear vision is mandatory. The
masks are designed on the basis of the
proven technology of Panorama Nova.
Dräger PAS Lite / PSS 3000
Thanks to the anti-static, impact resistant,
lightweight space frame, the Dräger
PAS Lite / PSS 3000 offers the wearer
more comfort in the industrial applications
and makes its cleaning and maintenance
quick and easy.
D-44241-2012
When chemical agents are used during mineral
processing, Dräger’s chemical protection suit
series can provide different levels of protection
against known and unknown hazardous substances
and a high comfort through freedom of movement
for a large variety of applications.
D-31383-2011
BODY PROTECTION
Against particles, toxic gases and vapors appearing
during the smelting and refining processes, Dräger
offers a broad portfolio of respiratory protection masks
and protective eye wear that can be combined to
meet the different application needs to ensure
effective protection and high wearing comfort.
ST-5450-2007
RESPIRATORY AND EYE PROTECTION
Dräger CPS 7800
The reusable Dräger CPS 7800 (type 1b)
provides excellent protection against
mechanical influences and multiple gaseous, liquid, aerosol and solid hazardous
substances and offers increased flexibility
and comfort in confined spaces.
D-29430-2009
| 17
Dräger X-am 5000
The Dräger X-am 5000 offers the flexibility
of tailor-made configuration to measure
up to five gases specific to the desired
applications including combustible gases
and vapors, oxygen and various toxics and
organic vapors.
Dräger X-zone 5500
The Dräger X-zone 5500 in combination
with the Dräger X-am 5000 or 5600 gas
detector can be used to measure up to
six gases and extends the portable gas
detection technology to an unique and
innovative area monitoring system.
ST-2448-2003
For your mineral processing operations, Dräger’s
stationary gas detection system can be used for
continuous monitoring of the ambient air and
detection of flames, while Dräger’s patented area
monitoring system offers flexibility for short-term
maintenance or turnaround tasks.
D-4924-2014
STATIONARY AND AREA MONITORING
Whether for personal air monitoring, workplace
exposure monitoring or confined space entry, Dräger
offers a comprehensive line of portable gas detection
products that enable fast and reliable measurement
of gas concentration levels at a relatively low cost of
ownership.
D-16519-2009
PORTABLE GAS DETECTION
Dräger Polytron® 7000
With the possibility to use pre-calibrated
DrägerSensor, the Dräger Polytron® 7000
is a virtually maintenance free and intrinsically safe transmitter that can satisfy
all oxygen and toxic gas measurement
applications on a single platform.
18 |
EMERGENCY ESCAPE
Our solutions for
D-13180-2014
D-82895-2013
Emergency Escape
Dräger PARAT®
Dräger PARAT® Escape Hoods are
designed to be easily donned, protecting
users from toxic industrial and fire-related
gases, vapors and particles during escape.
Different packaging and accessories are
available to suit the specific needs.
Dräger Saver CF
Simple to put on and featuring practically
automatic operation, the Dräger Saver CF
is a hood-based, positive-pressure
breathing device that can be used with
minimal training as an escape set in
surface operations.
D-35120-2011
With different nominal duration between 25 to
60 minutes, Dräger chemical oxygen self-contained
self rescuers are among the most commonly used
self rescuers in the mining industry and can be
incorporated into your self escape system according
to the specific requirements.
D-33925-2011
LONG DURATION ESCAPE
In an emergency situation Dräger filter or compressed
air escape sets offer immediate and effective protection
against toxic gases, vapors and particles for
15 minutes, enabling the wearer to reach their point
of safety. Short duration escape devices are usually
used in surface operations.
D-92862-2013
SHORT DURATION ESCAPE
Dräger Oxy 3000/6000
Thanks to the robust and state-of-the art
design, the Dräger Oxy 3000/6000
ensure not only immediate oxygen supply
for 30/60 minutes upon donning, but
also a ten-year service lifetime without
additional testing and maintenance.
D-46297-2012
| 19
Dräger Quick Fill Station
The Dräger Quick Fill Station opens up a
new possibility to enhance self-escape and
first response capability of underground
personnel. It offers good communication
possibilities and allows the simultaneous
charge of up to five SCBAs in minutes.
Dräger BPU
Designed as one compact unit, the
Dräger BPU can provide the occupants
in a positive-pressure refuge chamber
with breathable air for up to 96 hours
through the regeneration of the exhaled
air with Dräger’s proven soda lime.
D-19733-2015
In case of an emergency above or underground,
Dräger tailor-made escape and refuge chambers or
rooms provide a safe haven for mine workers until
the situation has been brought under control or help
has arrived.
D-10684-2011
LIFE SUPPORT SYSTEM
Depending on the specific emergency situation,
the Dräger ChargeAir system presents a good
alternative for emergency situations helping the
workforce to escape from hazardous environment
and also enabling trained personnel to perform
immediate first response.
D-5124-2014
FIRST RESPONSE AND EMERGENCY ESCAPE
Dräger Refuge Chamber
The Dräger Refuge Chamber can be
designed as modular systems according
to the specific escape and rescue plan
on the mine site to offer the highest
possible protection to the occupants.
20 |
EMERGENCY RESPONSE AND RESCUE
Our solutions for
D-13180-2014
D-114772-2013
Emergency Response
and Rescue
Dräger HPS 7000
Thanks to its innovative and ergonomic
design the Dräger HPS 7000 is one of the
safest full-shell helmets. A comprehensive
accessory program makes it a multifunctional
system solution which provides the optimum
protection during every operation.
Dräger PSS 7000
The Dräger PSS 7000 is designed to
withstand high level wear and tear, while
enabling easy service and maintenance.
A range of optional components can be
selected to meet the specific needs of
emergency response teams.
D-23567-2009
Throughout history, Dräger’s breathing apparatus,
especially the closed circuit breathing apparatus, has
always been the first choice for mine rescue teams
worldwide, protecting the mine rescuers during their
mine rescue and recovery missions.
D-35061-2011
BREATHING PROTECTION
Dräger’s helmet portfolio offers a high level of
wearing comfort and safety. It can be combined
with Dräger masks and communication devices
for a complete head protection portfolio.
D-59555-2012
HEAD PROTECTION
Dräger PSS BG 4 plus
Equipped with a fully electronic signal and
warning unit the Dräger Bodyguard II, the
Dräger PSS BG 4 plus provides the user
maximum comfort and flexibility for long
duration operation up to four hours, even
in a toxic environment.
D-112943-2013
| 21
Dräger UCF 9000
The Dräger UCF 9000 is a thermal
imaging and digital camera in one.
With its integrated video camera the
Dräger UCF 9000 can be used to
record operations and training situations
underground live for in-depth analysis.
Dräger X-am 7000
The high performance built-in pump
and the possibility of integrating different
types of sensors make the Dräger
X-am 7000 the perfect multi gas
detector for emergency response teams
to perform mine environment evaluation.
D-19338-2009
Even under the toughest conditions, Dräger’s
portable gas detection portfolio allows accurate
gas measurement and facilitates mines rescue
teams to evaluate the environment before re-entry,
during rescue and recovery.
ST-67-2006
PORTABLE GAS DETECTION
When vision is impaired by dense smoke or darkness,
Dräger’s thermal imaging cameras are invaluable tools
for casualty search and situational assessment in the
event of a mine fire or explosion, fire fighting and
similar emergency response situation.
D-13263-2010
THERMAL IMAGING CAMERA
Dräger-Tubes®
With a tradition of nearly 80 years,
Dräger-Tubes® are a reliable source for
spot measurement and precautionary
warnings in various mining applications
such as the testing of the effectiveness
of ventilation systems.
22 |
CLEANING, DISINFECTION, MAINTENANCE
Our solutions for
D-46330-2012
D-103259-2013
Cleaning, Disinfection,
Maintenance
Customized workshop system
Dräger‘s customized workshop system
can be equipped with service and
testing devices, washing and cleaning/
disinfection systems and recharging
compressors with air quality monitoring
and safety filling ramps.
Sekusept Cleaner
Sekusept Cleaner is a concentrated
liquid cleaning agent for manual cleaning
of respiratory masks, breathing protection
equipment, diving apparatus and chemical protective suits before disinfection.
D-98838-2013
For manual and machine cleaning and disinfection of
personal protective equipment, Dräger offers a range
of detergents and disinfectians as well as washing
machines and driers suited to different needs.
D-98823-2013
CLEANING AND DISINFECTION
Dräger also offers complete workshop systems –
from conceptualization to individual configuration,
for process optimization and efficiency improvement
in both existing and planned workshops.
ST-2240-2006
WORKSHOP SYSTEM
Incidin Rapid
Incidin Rapid is a liquid disinfectant
concentrate for the disinfection of
respiratory masks, breathing protection
equipment, diving apparatus, chemical
protective suits, drying cabinets, work
surfaces and floors.
D-115264-2013
| 23
Dräger Test-it 6100
The Dräger Test-it 6100 is a lightweight
and easy-to-use mobile test device
especially designed to test all functions
of the Dräger PSS BG4 plus at an
attractive price and low operating costs.
Dräger X-dock 5300/6300/6600
The Dräger X-dock series enables
automated and simultaneous tests and
calibration of up to ten instruments at
high speed with low gas consumption
and facilitates the management of
relevant data for subsequent evaluation.
D-85350-2013
Dräger’s compressors and booster pumps allow
a quick and reliable filling of breathing gases to
ensure your Dräger breathing apparatus are ready
for use at all times.
D-47869-2012
BREATHING GAS LOGISTICS
Dräger’s easy-to-use test and calibration equipment
enable optimum care and maintenance of Dräger
personal protective equipment and portable gas
detectors and facilitate data and fleet management.
D-54765-2012
TEST AND CALIBRATION SYSTEM
Dräger DOB 200 ECO
Fitted in a robust roller case, the
Dräger DOB 200 ECO is a mobile,
robust and effective booster pump,
which allows the simultaneous refilling
of up to four oxygen cylinders used in
the Dräger PSS BG 4 plus.
24 |
YOUR SERVICE NEEDS & REQUIREMENTS
Our solutions for
D-13180-2014
ST-16367-2008
your Service needs &
requirements
Customer support
From general information inquiries to
technical issues, a team of Dräger
customer care and technical specialists
are available to assist you with your
inquiries online, via telephone or on site.
Device service
DrägerService or authorized service partners
perform inspection, testing, maintenance
and repair of your Dräger safety devices
according to the maintenance plan or as
required to ensure the device is always in
the best condition for usage.
D-6697-2014
As an integral part of our commitment to support
the effective health and safety management of our
customers, Dräger offers a wide range of flexible
services to meet specific needs and requirements –
from maintenance and repair of individual units to
comprehensive service packages.
D-53026-2012
DRÄGER SERVICES
Before, during and after your purchase and use of
Dräger safety equipment, our customer services
around the world are always there to answer your
questions and make sure your needs are addressed
in a timely manner.
MT-3055-2003
CUSTOMER SERVICES
Customized service package
Tailored to your specific needs and requirements, DrägerService offers a range of
service contracts to ensure you can have
the best possible service packages for
the maintenance and management of your
Dräger safety equipment.
D-32139-2011
| 25
Service technicians training
Dräger Academy provides training and
certification in use, service and maintenance of Dräger safety devices in
accordance with the corresponding
regulations and service requirements
of the devices.
Safety Shop
The Dräger Safety Shop is a fully equipped
mobile container with safety and personal
protective equipment. The specific issue
of materials and their optimized servicing
reduces costs and ensures that fully
functional equipment is always available.
D-32134-2011
Whether for temporary demand or for the management
and maintenance of safety equipment in daily use,
Dräger Shutdown & Rental Management provides
you with the safety devices and services required
to reduce your downtime and increase your flexibility
without a long-term investment in additional equipment.
D-33717-2009
SHUTDOWN AND RENTAL MANAGEMENT
Protecting life is the top priority at Dräger – realized
not only in the premium quality of our equipment but
also in our practical trainings and seminars at the
Dräger Academy.
D-20597-2009
DRÄGER ACADEMY
Rental Robot
The Dräger Rental Robot provides automated material logistics for your safety
equipment, allowing registered users to
obtain the correct safety equipment and
the required consumables – at any time
and close to the location of use.
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
www.draeger.com
Manufacturer:
Dräger Safety AG & Co. KGaA
Revalstraße 1
23560 Lübeck, Germany
AUSTRALIA
BRISBANE
PERTH
MELBOURNE (HEAD OFFICE)
Unit 7 Rocklea Place
1909 Ipswich Rd
Rocklea QLD 4106
72A Irvine Drive
Malaga WA 6090
Draeger Safety Pacific Pty. Ltd.
8 Acacia Place
Notting Hill VIC 3168
Tel (Local Toll-free) 1800 372 437 Tel +61 3 9265 5000
Fax (Local Toll-free) 1800 647 484
Fax+61 3 9265 5095
[email protected]
SYDNEY
DARWIN
Unit 1, 408 Stuart Highway
Winnellie NT 0820
NEW ZEALAND
GLADSTONE
Unit 5, 39 Toolooa St
Gladstone QLD 4680
SALES AND SERVICE CENTRES
KALGOORLIE
ADELAIDE
Locate your Regional Sales
Representative at:
www.draeger.com/contact
258 Grange Road
Flinders Park SA 5025
Unit 15, 38-46 South Street
Rydalmere NSW 2116
184 Hay Street
Kalgoorlie WA 6430
AUCKLAND
Unit 4, 24 Bishop Dunn Place
East Tamaki, Auckland
Tel 0800 372 437
Fax0800 733 133
WELLINGTON
KARRATHA
Unit 1, 16 Hedland Place
Karratha WA 6714
Unit 3, Parkhead Court
33 Pito-One Road Korokoro,
Lower Hutt 5012
90 71 926 | 15.07-2 | Communications & Sales Marketing | PP | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2015 Drägerwerk AG & Co. KGaA
CORPORATE HEADQUARTERS

Similar documents