Construction - Sika Ltd. (Vietnam)

Transcription

Construction
Sika Product Information Chart
► Concrete Production
►
Grouting / Anchoring
► Concrete Repair & Protection
►
Structural Strengthening
► Joint Sealing & Elastic Bonding
►
►
►
►
Steel Protection
Waterproofing
Flooring / Coating
Roofing
Sika Limited (Vietnam)
Introduction
Sika Limited (Viet Nam) is a wholly
owned subsidiary of Sika AG in
Switzerland licensed in 1993 to
locally produce various range of
construction chemical product. Since
then, Sika has expanded rapidly,
establishing a network to a wide
and diverse construction market
throughout Vietnam.
The company’s future direction is
clearly focused on local production,
thus reducing dependence on imported
products, which in turn allow greater
flexibility and enables Sika to adapt
products for the special requirements
CONCRETE PRODUCTION
Concrete production (Water Reducers)
PC based highrange water reducers Sika® Viscocrete® HE 500
Sika® Viscocrete® HE-10
Sika® Viscocrete® 3000-10
Sika® Viscocrete® HE-10AT
Sika® Viscocrete® SP1000
Sika® Viscocrete® 3000
Sika® Viscocrete® SP1000 PV
Page 4
Superplasticizers Page 6
Sikament® NN
Sikament® R4
Sikament® 2000 AT
Sikament® 163 EX-HV
Sikament® 2000AT (N)
Sikament® R4(ER)
Sikament® V4
Sikament® RMC
Sikament® NN GB
Sikament® MP
of the local market.
Sika is proud of its quality products
in construction chemical which are
PlasticizersPage 10
Plastiment® 96
Plastiment® BV 40
Plastiment® TM 25
Plastiment® 100
carefully tailored to local market
needs, in ready mixed concrete plants,
precast factories, high rise buildings,
industrial zones, cement factories,
airports, seaports and infrastructure
projects (such as bridges, clean
water supply and water treatment
plants, hydro & thermal power plants,
dykes and dams).
Sika is proud to be the first organization
in the construction industry in Vietnam
to obtain ISO 9001 certificate.
Other admixtures
Products for Shotcrete production
Sigunit® D54-AF
Sigunit® L53-MY
Page 11
Durability Enhancers
Plastocrete® N
Sika® Aer
Sikacrete® PP1
Page 12
Manufacturing Aids
Sika® Pump
Page 13
Concrete Essentials
Antisol® E
Antisol® S
Rugasol® F, C
Separol®
Sika Formoil® C
Page 13
Sika Product Information Chart
GROUTING / ANCHORING
Cementitious grouts
SikaGrout® 212-11/214-11
SikaGrout® 214-11 HS
SikaGrout® GP
STEEL PROTECTION
Page 15
Steel protectionPage 23
Sika® Poxitar F
WATERPROOFING
Resin grouts
Sikadur® 42MP
Page 16
Back filing & stabilization
Sika® Rokkon (C-VN)
Page 16
CONCRETE REPAIR & PROTECTION
Concrete repair: Site batch mortars
Sika® Latex
Sika® Latex TH
Intraplast® Z-HV
Page 16
Concrete repair: Ready to use mortar Sika® MonoTop® 610
Sika® MonoTop® 615 HB
Sika® MonoTop® R
Sika Refit® 2000
Sikagard® 75 EpoCem®
Page 17
Page 24
Elastic Waterproofing
Sikaproof® Membrane
Page 25
Joints (water retaining structures)
Sika - Hydrotite CJ-Type
Sika® Waterbars
Page 25
Membranes (water retaining structures)
BC Bitumen Coating
Sika® Bituseal-T140-mg-0°C (SA)
Sika® Bituseal-T140-sg-0°C (SA)
Sika® Bituseal-T130-sg-0°C (SA)
Page 26
FLOORING / COATING
STRUCTURAL STRENGTHENING
Sika® Carbodur® Plates
Sikadur®-30
Sikadur®-30 LP
Sikadur®-330
SikaWrap®-230 C/45
Rigid waterproofing
SikaTop® Seal 107
Sikalite®
Sika® 102
Sika® Plug CN
Page 19
Rigid bondingPage 21
Sikadur® 731
Sikadur® 732
Sikadur® 752
JOINT SEALING & ELASTIC BONDING
Façade jointPage 22
Sikaflex® Pro-3WF
Sikaflex® Construction (AP)
Sika® Primer-3 N
Sikaflex® 11 FC
Elastic BondingPage 23
SikaBond® T55(J)
Resin floor and coating
Sikafloor®-2530W New
Sikafloor®-381
Sika® Extender T
Sikafloor®-161
Sikafloor®-263 SL
Sikafloor®-264
Page 27
Epocem floor
Sikafloor®-81 EpoCem®
Sikafloor®-21 PurCem® FG
Page 29
Cementitious floor
Sikafloor® Chapdur®
Sikafloor®-2 Syn Top
Page 29
ROOFING
Liquid Applied Membrane
Page 30
Sikalastic® -450
PVC Membrane
Sika® Sarnafil®
Page 30
Concrete Production
Ultra high range water-reducing concrete admixture
►
Mainly suitable for the manufacture of concrete in
precast factories.
Use
►
Excels by its extremely high water reduction
capacity, providing good flowability while retaining
optimal cohesion of the mix.
Consumption / Dosage / Density
►
For soft/plastic concrete: 0.5 - 0.8 ltr per 100 kg of
cement
►
For SCC concrete: 0.9 - 1.8 ltr per 100 kg of cement
Specifications / Test reports
►
Packaging
►
Complies with ASTM C-494 Type F
1000 ltr/ 200 ltr / 25 ltr / 5 ltr
►
precast factories.
Use
►
►
For soft/plastic concrete: 0.5 - 0.8 ltr per 100 kg of
cement
►
For SCC concrete : 0.9 - 2.0 ltr per 100 kg of cement
►
Packaging
►
1000 ltr / 200 ltr / 25 ltr / 5 ltr
High range water-reducing admixture
►
Mainly suitable for the manufacture of concrete for
RMC and precast batching plants.
Use
►
capacity, providing good flowabilty while retaining
►
►
Packaging
►
0.7 - 2.5 ltr per 100 kg of cement
Complies with ASTM C-494 Type G
1000 ltr / 200 ltr / 25 ltr / 5 ltr
Concrete Production
Sika® Viscocrete® HE- 10AT
Use
►
Multipurpose admixture for the manufacture of high
performances pre-cast and cast-on-site concretes.
►
►
For soft/ plastic concrete: 0.5 - 0.8 ltr per 100 kg of
cement
►
For SCC concrete 0.9 - 1.8 ltr per 100 kg of cement
►
Packaging
►
Complies with ASTM C-494 Type F & G
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Use
►
►
►
►
Packaging
►
capacity, providing good flow ability while
retaining optimal cohesion of the mix.
Soft concrete: 0.7 - 2.5 ltr per 100 kg of cement
Complies with ASTM type G
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika® Viscocrete® SP 1000
Use
►
precast factories.
►
►
For soft concrete: 0.5 - 0.9 ltr per 100 kg of cement
►
For spun piles: 0.6 - 0.9 ltr per 100 kg of cement
►
For SCC concrete: 0.9 - 2.0 ltr per 100 kg of cement
►
Packaging
►
Complies with ASTM type F and G
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sika Product Information Chart 2011
5
Concrete Production
Sika® Viscocrete® 3000
High range water reducing admixture.
►
Use
►
capacit y, providing good flow ability while
retaining optimal cohesion of the mix.
►
Packaging
►
Complies with ASTM C 494 Type G
200 ltr / 25 ltr / 5 ltr
Sika® Viscocrete® SP 1000 PV
Ultra high range water reducer with hardening acceleration effect
concrete admixture
►
precast factories.
Use
►
►
►
Packaging
►
1.090-1.110 kg/ lít
Complies with ASTM type F and G
200 ltr / 25 ltr / 5 ltr
Sikament® NN
High range water-reducing concrete admixture
►
Used as a superplasticizer in the production of
flowable concrete.
Use
►
Used as a water-reducing agent leading to high
early strength concrete.
►
►
Packaging
►
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Concrete Production
Sikament® R4
High range water-reducing and set retarding concrete admixture
Use
►
►
►
Packaging
►
Superplasticizer is used for flowable and site batch
concrete
0.6 to 1.6 ltr per 100 kg of cement
Complies with ASTM type D and G
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® 2000 AT
Use
►
►
►
Packaging
►
Used especially for high strength concrete that
needs long lasting slump retention under hot
climate condition.
1000 ltr / 200 ltr / 25 ltr / 5 ltr
Sikament® 163 EX-HV
Use
►
As a superplastiziser, Sikament® 163 EX HV is used
for flowing concrete
►
As a substantial water-reducing agent, Sikament®
163 EX HV is used where high early and ultimate
strength is required
►
►
Packaging
►
Complies with ASTM C-494 type A and F
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
7
Concrete Production
Sikament® 2000 AT (N)
Use
►
►
0.60 - 1.50 ltr per kg of cement
►
Complies with ASTM C-494 type G
Packaging
►
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Used especially for high strength concrete that
needs long lasting slump retention under hot
climate condition.
Sikament® R4 (ER)
High range water-reducing and very long set retarding concrete
admixture
Use
►
►
►
Complies with ASTM C-494 Type D and G
Packaging
►
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Used as a superplasticizer and set-retarding
admixture in structural and mass concrete where
long lasting slump and a controlled extension of
setting time is required.
Sikament® V4
Use
►
Superplasticizer is used for flowable concrete.
►
0.6 - 1.10 ltr per 100 kg of cement.
Packaging
►
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Concrete Production
Sikament® RMC
Use
►
►
►
Packaging
►
Superplasticizer is used for flowable concrete,
at high dosages very good slump keeping for
diaphragm walls.
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Sikament® NN GB
Use
►
Used as a water reducer in the production of gypsum
boards.
►
Used as a water-reducing agent leading to high early
strength concrete.
►
►
Packaging
►
0.60 – 2.00 ltr per 100 kg of cement
Complies with ASTM C494 Type F
200 ltr / 25 ltr / 5 ltr
Sikament® MP
Use
►
►
►
Packaging
►
Used as a superplasticizer and set-retarding
admixture in structural and mass concrete where
long lasting slump and a controlled extension of
setting time is required.
0.60 – 1.80 ltr per 100 kg of cement
Complies with ASTM C494 Type D & G
200 ltr / 25 ltr / 5 ltr
9
Concrete Production
Plastiment® 96
Water-reducing and set retarding concrete admixture
Use
►
►
►
Packaging
►
Used in structural and mass concrete where long
setting times and improved workability are required.
0.20 - 1.0 ltr per 100 kg of cement.
Complies with ASTM C-494 Type D
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Plastiment® BV 40
Use
►
►
►
Packaging
►
Used whenever high quality structural concrete is
required.
0.30-0.60 ltr per 100 kg of cement
Complies with ASTM C-494 Type A
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr
Plastiment® TM 25
Water-reducing and set retarding concrete admixtures
Use
►
►
►
Packaging
►
setting times and improved workability are required
suitable Roller compacted concrete.
0.5 - 4.0 ltr per 100 kg of cementitious
Complies with ASTM C-494 Type B and D
25 ltr/ 200 ltr (drums) and 1000 ltr (PVC tank)
Concrete Production
Plastiment® 100
Water-reducing and set retarding concrete admixture
Use
►
►
►
Packaging
►
setting times and improved workability are required.
0.2 to 0.6 ltr per 100 kg of cement.
Complies with ASTM type D.
1000 ltr/ 200 ltr/ 25 ltr/ 5 ltr.
Sigunit® D54-AF
Alkalifree powder accelerator shotcrete admixture
Use
►
►
Packaging
►
A set accelerator suitable for dry spray applications.
2.0-6.0% by weight of cement
20 kg/ bag
Sigunit® L53-MY
Alkalifree liquid accelerator shotcrete admixture
Use
►
►
Packaging
►
A set accelerator suitable for wet and dry spray
application.
2.0 - 6.0% by weight of cement, depends on shotcrete
process
200 ltr/ pail; 1000 ltr/ plastic tank
11
Concrete Production
Plastocrete® N
Waterproofing admixture
Use
►
►
►
Packaging
►
Recommended for use in structural and mass
concrete, particularly water-retaining structures.
0.30-0.50 ltr per 100 kg of cement
Complies with ASTM C-494 Type A
200 ltr/ 25 ltr/ 5 ltr
Sika® Aer
Air-entraining agent
►
Used to produce easily workable and durable
concrete for:
Use
- Dams and reservoirs
- Roads
- Runways and taxiways
- Mass concrete structures
►
Packaging
►
Sikacrete® PP1
Concrete additive
Use
►
►
►
Packaging
►
Used in structural concrete, precast concrete, and
other fields of concrete construction where extra
demands are made on the quality of fresh and
hardened concrete.
5 - 10% by weight of cement
Test report are available
20 kg/ bag
Concrete Production
Sika® Pump
Universal pumping additive
Use
►
Sika® Pump is recommended for concrete mixes
with varying fines content, low cement content or
unsatisfactory aggregate grading. These conditions
tend to cause bleeding of the fresh concrete, leading
to segregation during pumping which tends to lead
to extremely high pump pressures.
►
The use of Sika® Pump also allows for secondary
raw materials such as aggregates derived from
excavation or demolition work to be utilized.Concrete
made with this type of aggregate can be pumped
without excessive pump pressure.
►
Packaging
►
Antisol® E
Concrete curing compounds based on emulsified paraffin
Use
►
Used mainly for structural concrete surfaces where
subsequent surface treatments will not be required,
for example, fare-face concrete.
►
Sprayed onto newly laid concrete surfaces to form
a thin film barrier against premature water loss.
Without disturbance to the normal setting action,
the concrete is then allowed to cure and achieve
maximum properties. Antisol® E is especially
suitable for trafficable surfaces and in large areas of
exposed concrete.
►
►
Packaging
►
4 - 6 m2/ ltr
Complies with ASTM C-309 Type 1 class A
Antisol® S
Concrete curing compounds based on metallic silicates
Use
►
Particularly recommended for the treatment of
vertical surfaces which are to receive subsequent
treatments where resin based curing membranes
would be unsuitable because of their uncertain film
breakdown, and the effect on the performance of
further surface treatments.
►
May be applied to “green” concrete to increase
the density of the cured surface thus improving its
subsequent durability.
►
Packaging
►
4 - 5 m2/ ltr
13
Concrete Production
Rugasol® F, C
Concrete surface retarders
►
Surface retarders have been specifically designed
for the production of exposed aggregate finishes or
for producing a mechanical key to construction joints,
stop ends, or subsequent rendering applications.
Use
►
Normally supplied in two standard grades:
- Rugasol F: Low viscosits paste retarder for application
to formwork to produce exposed aggregate work.
- Rugasol C: Liquid retarder for horizontal construction
joints and surfaces.
►
Packaging
►
0.25 - 0.3 kg/ m2
Rugasol C: 200 ltr/ 25 ltr/ 5 ltr
►
Rugasol F: 15 kg/ can
Separol®
Chemical form release agent
Use
►
►
Form release agent for steel and wooden formwork.
Separol facilitates removal and cleaning of
shuttering. Number of lifts is substantially increased.
Wood surface: approx 21 m2/ ltr
►
Metal surface: approx 42m2/ ltr
►
200 ltr / 25 ltr / 5 ltr
Packaging
Sika Formoil® C
Chemical form release agent
►
Form release agent for steel and wooden formwork
Use
►
Sika® Formoil C facilitates removal and cleaning of
shuttering.
►
It shall be diluted with water prior to use.
►
Packaging
►
~ 0.86 kg/ ltr
200 ltr / 25 ltr / 5 ltr
SikaGrout® 212-11/214-11
Non-shrink, pumpable, cementitious grout
Use
►
SikaGrout® 212-11 and SikaGrout® 214-11 are suitable
for the following grouting works:
►
►
Packaging
►
- Machine foundations
- Rails beds
- Columns in precast construction
- Anchor bolts
- Bridge bearings
- Cavities
- Gaps
- Recesses
- High strength repair
Approx. 76 bags for 1 cubic meter of wet mortar
Local certificate is available
25 kg/ bag
SikaGrout® 214-11 HS
Non-shrink, high early strength, cementitious grout
Use
►
►
►
Packaging
►
The high early strength property is suitable for
work that requires early loads including machine
bases structural columns, prestressed girders,
bridge bearings, rail posts and seatings bolts etc.
Approx. 77 bags for 1 cubic meter of wet mortar
25 kg/ bag
SikaGrout® GP
Non-shrink, pumpable, general purpose cementitious grout
Use
►
Suitable for the following grouting works:
►
►
Packaging
►
- Machine foundations (non vibrating)
- Rails beds
- Columns in precast construction
- Anchor bolts
- Bridge bearings
- Cavities
- Gaps
- Recesses
- Concrete repair
Approx. 76 bags for 1 cubic meter of wetmortar
25 kg/ bag
15
Sikadur® 42 MP
3-component epoxy resin castable grout
Use
►
►
Packaging
►
Self – levelling, Flowable epoxy mortar on
concrete, stone, steel, aluminium, asbestos
cement, wood, polyester and epoxy
2.13 kg/ ltr
12 kg set (A+B+C)
►
Industrial packaging on request
Sika® Rokkon (C-VN)
Cementitious cartridge for rock bolting
Use
►
Packaging
►
Used for grouting rockbolts for strata reinforcement
in tunneling and mining to reduce roof collapses.
20 cartridges/ box (38 mm diameter)
Concrete Repair & Protection
Sika® Latex
Bonding agent and waterproofing admixture
►
Sika® Latex is a high quality emulsion that substantially
increases the qualities of cement mortars, such as:
Use
- Bonding slurry
- Thin layer patching mortars
- Waterproofing renders
- Floor screeds
- Concrete repair mortar
- Abrasion resistant linings
- Tile fixing mortars
- Masonry mortars
►
Packaging
►
1.02 kg/ ltr
Sika® Latex TH
Bonding agent and waterproofing admixture
Use
►
►
Packaging
►
A high quality emulsion that substantially improve
the qualities of cement mortars, such as:
- Bonding slurry
- Thin layer patching mortars
- Waterproofing renders
- Floor screeds
- Concrete repair mortar
- Abrasion resistant linings
- Tile fixing mortars
- Masonry mortars
1.01 kg/ ltr
Intraplast® Z-HV
Shrinkage compensating and plasticizing admixture
Use
►
►
Packaging
►
A special product for the production of grouting mortar,
backfilling mortar, and rock and soil anchoring.
Typical 0.4-0.8% by weight of cement for slurry
Sika® MonoTop® 610
Bonding slurry and reinforcement corrosion protection
Use
►
►
►
Packaging
►
As a treatment for preventing continued corrosion
of reinforcement in concrete and as a bonding
bridge for concrete repair using the Sika® MonoTop®
concrete repair mortars.
Bonding: 1.5 - 2.0 kg/ m2
Local test report is avaliable
25 kg/ bag
17
Sika® MonoTop® 615 HB
High build polymer modified repair mortar
►
Fast repair to overhead, horizontal or vertical concrete or
mortar surfaces above and below ground level.
Use
►
Filling/ repair mortar for voids, honeycombed
areas, etc.
►
Repair of spalled concrete caused by reinforcement
corrosion.
►
Repairs with improved resistance to oils, sewage,
chemicals, etc.
►
►
Packaging
►
Approx. 60 bags yield 1 cubic meter of mortar
25 kg/ bag
Sika® MonoTop® R
High performance polymer modified repair mortar
►
Fast repairs to horizontal and vertical concrete or
mortar surfaces above and below ground level.
Use
►
Filling/ repair mortar for voids, honeycombed areas, etc.
►
Repair of spalled concrete caused by reinforcement
corrosion.
►
Repairs with improved resistance to oils, sewage,
chemicals, etc.
►
►
Packaging
►
Approximately 75 bag yields approx. 1 cubicmeter
of mortar
25 kg/ bag
Sika Refit® 2000
Mortar for cosmetic concrete surface repair and fairing coat
►
Used as repair mortar for minor surface defects
Use
►
A cosmetic mortar designed to eliminate surface
defects due to demoulding, pores or honeycombs,
and is suitable for small repairs.
►
As levelling mortar and fairing coat or finishing skim
coat to concrete, mortar patches and screeds.
►
Packaging
►
Approximately 82 bag yields approx. 1 cubicmeter
of mortar
20 kg/ bag
Sikagard® 75 EpoCem®
Superfine epoxy-cement sealing mortar
Use
►
►
►
Packaging
►
For coatings 1.0 –2.0 mm thick:
- On concrete, mortar, stone
- As a thin sealer coat for vertical and horizontal
surfaces
-For making good spalled and pitted concrete,
blowholes, honeycombs
- For filling in joints and making good surface
irregularities
- Temporary moisture barrier for epoxy/ polyurethane
basis flooring system,
Approx. 2-4 kg/ m2 per 1 - 2 mm thickness
International certificate is available
24 kg/ set (A+B+C)
Sika® Carbodur® Plates
Pultruded carbon fiber plates for structural strengthening
Use
►
To strengthen structures for:
- Load increase
- Damage to structural elements
- Service improvements
- Change in structural system
- Change of specification
- Design or construction defects
Consumption / Dosage
►
Packaging
►
Refer datasheet
See data sheet
Sikadur® 30
Adhesive for bonding reinforcement
Use
►
Adhesive for bonding structural reinforcement,
particularly in structural strengthening works.
Including:
- Sika® CarboDur® Plates to concrete, brickwork
and timber (for details see the Sika® CarboDur®
Product Data Sheet).
- Steel plates to concrete (for details see the
relevant Sika ® Technical information).
Packaging
►
6 kg/ set
19
Sikadur® 30 LP
Adhesive for bonding reinforcement
►
Adhesive for bonding structural reinforcement,
particularly in structural strengthening works.
Including:
Use
- Sika® CarboDur® Plates to concrete, brickwork,
timber and steel (for details see the Sika®
CarboDur® Product Data Sheet)
- Steel plates to concrete (for details see the
relevant Sika® Technical information).
►
Packaging
6 kg/ set
Sikadur® 330
2-part epoxy impregnation resin
►
Impregnation resin for SikaWrap® fabric reinforcement
for the dry application method
Use
►
Primer resin for the wet application system
►
Structural adhesive for bonding Sika® CarboDur®
Plates to even surfaces
►
Packaging
►
Mixed Resin: 1.31 kg/ ltr (at +23°C)
Standard: 5kg/ set
►
Industrial:
- Part A: 24 kg pails
- Part B: 6 kg pails
SikaWrap®-230 C/45
Woven carbon fiber fabric for structural strengthening
Use
►
►
Packaging
►
Strengthening of reinforced concrete structures,
brickwork and timber in case of flexural and shear
load.
1.76 g/ cm3
See data sheet
Sikadur® 731
Thixotropic 2-component epoxy resin adhesive
Use
►
Thin firm bonding
►
Can be used on concrete, steel, ceramics, iron,
aluminum, wood, glass, polyester & epoxy
►
Concrete repairs
►
Blow hole filling
►
Starter bar adhesive
►
Crack and surface sealing
►
Packaging
►
Specific gravity: ~ 1.7 kg/ ltr
1 kg/ 2 kg/ set
Sikadur® 732
2-component epoxy resin bonding agent
Use
►
To permanently bond freshly mixed mortar or
concrete to hardened concrete, glazed bricks, tiles,
steel or other structural materials.
►
Sikadur® 732 is also used to seal hair lines cracks
and as a protective coating to steel parts i.e. anchor
plates.
►
Specific gravity: ~ 1.4 kg/ ltr
►
Bonding
Packaging
: 0.3 - 0.8kg/m2
►
1 kg/ 2 kg/ set
Sikadur® 752
Low viscosity 2-component injection resin
Use
►
►
Packaging
►
Used to fill and seal cavities and cracks in
structural components such as columns, beams,
foundations, decks and water-retaining structures.
It not only forms an effective barrier against
water infiltration, b u t a l s o b o n d s t h e concrete
sections, together, thereby restoring original
structural strengths.
Specific gravity : ~ 1.1kg/ltr
1 kg / 2 kg/ set
21
Joint Sealing & Elastic Bonding
Sikaflex® Pro-3WF
Elastic polyurethane sealant with a movement capacity of 25%
Use
►
►
►
Packaging
►
Versatile and therefore suitable for various fields
of use. Design of joints must be matched to the
individual conditions of the project.
Depend on joint size.
Report for use in waste water plants and contact
with food.
600 ml / sausage
Sikaflex® Construction (AP)
1-Part polyurethane sealant for building joints
Use
►
►
►
Packaging
►
used as a general purpose sealant for sealing joints
in building construction such as movement and
construction/isolation joints around windows and
doors, facades, claddings etc. in concrete, brick,
wood, metal and PVC sections and structures etc.
~ 1.30 kg/ ltr (colour concrete grey)
ISO 11600 (Type F Class 25HM/20LM)
600 ml sausages, 20 sausages per box.
Sika® Primer-3 N
Primer for joint sealant
Use
►
►
Packaging
►
Primer on porous substrate for Sikaflex® Construction
(AP), Sikaflex® PRO-3WF, Sikaflex®-15LM and
Sikaflex®-221 joint sealants.
~ 150 g/ m2
1 ltr/ tin
Joint Sealing & Elastic Bonding
Sikaflex® 11 FC
1 – part moisture curing, polyurethane adhesive sealant
Use
►
Joints in the construction industry, particularly where
a higher modulus and lower movement capacity are
required for joints with low or medium movement.
- Connection joints between floors / stairs and wall.
- Connection joints between floor and machinery.
- Seam sealing/ sealing of pipe ducts/ ventilation
systems.
- Multi purpose in metal and wood construction work.
►
Packaging
►
1.30 kg/ ltr
310 ml/ cartridge
SikaBond® T55(J)
Timber flooring adhesive
Use
►
►
Packaging
►
Is an elastic timber flooring adhesive suitable for
bonding parquetry strip floor panels to concrete
or timber floors (both new or existing), or as an
underlay prior to timber flooring.
1.35kg/ ltr
2 kg pack/ 16kg pail/ 600 ml pack
Steel Protection
Sika® Poxitar F
Heavy duty epoxy anthracene oil combination coating for steel and
concrete
Use
►
Suitable for concrete and steel, especially in case of
application onto damp surfaces; also as an internal
and external coating for buried and submerged
structures,e.g. sewage systems, chemical industry
etc.
►
Not suitable for surfaces in contact with drinking
water, housing, stables etc.
Packaging
►
10 kg per set (component A + B)
- Component A
: 8.50 kg pail
- Component B : 1.50 kg pail
23
Waterproofing
SikaTop® Seal 107
Flexible protective and waterproofing slurry
►
Used for external and internal water-proofing,
repair work.
Use
Areas of application:
- Potable water tank
- Basements
-Terraces and balconies
- Bridges
- Retaining walls
- Sealing hairline cracks, not subjected to movement.
►
►
Packaging
►
1.5 - 2.0 kg/ m2 per coat
Local and international test reports available
25 kg/ set
Sikalite®
Waterproofing admixture for mortar with extended workability
Use
►
►
Packaging
►
Sikalite forms the basis for the Sika render
system which is most suitable for the waterproofing
of masonry structures and mortar where hydrostatic
pressure is not apparent.
1 - 2% by weight of cement
Sika® 102
Waterplug, fast setting, cementitious mortar
Use
►
Packaging
►
To stop pressure leaks and seepage through rock
and concrete as well as through joints between
concrete and steel (bolt surroundings, ducts,
sheetpiles etc.) in subways, culverts, tunnels, dams,
basements, pools.
2 kg/ 5 kg/ bag
Waterproofing
Sika® Plug CN
Waterplug, fast setting, cementitious mortar
Use
►
Packaging
►
To stop pressure leaks and seepage through rock
and concrete as well as through joints between
concrete and steel (bolt surroundings, ducts,
sheetpiles etc.) in subways, culverts, tunnels, dams,
basements, pools.
1 kg/ bag
Sikaproof® Membrane
Highly elastic waterproofing liquid membrane
Use
►
Below grade waterproofing of concrete and masonry
surface
►
Flat roofs
►
Balconies
►
Basement etc.
►
Wall damp proofing
►
►
Packaging
►
2.0 kg/ m2 (for dryfilm thickness of 1.1 mm)
Complies with ASTM D 1227
18 kg/ pail
Sika - Hydrotite CJ - Type
A hydrophilic rubber combination material for sealing site formed
concrete joints
Use
►
Is hydrophilic rubber sealing used extensively
throughout the construction industry to seal joints
between precast concrete units, steel and other
materials.
►
Developed as an effective, simple and economical
sealing material for site formed contruction joints.
►
Packaging
►
Local test report available
10 m/ roll
25
Waterproofing
Sika® Waterbars
Flexible PVC waterstop
►
For the effective sealing of concrete construction
and expansion joints in structures such as:
Use
- Basements
- Water reservoirs
- Sewage treatment plants
- Swimming pools
- Retaining walls
- Lift shafts
- Tunnels, culverts
- Service pits
►
Packaging
►
Local test certificates available
20 m/ 15m/ roll
BC Bitumen Coating
Bituminous waterproofing basecoat
►
To provide a waterproof membrane on structural
reinforced concrete not exposed to UV, for example
retaining walls.
Use
►
As a priming coat for bituminous membranes.
►
Priming coat: 0.075 – 0.1 kg/m2 (dilute 1:1 with
clean water)
►
Neat coat: 0.6 kg/m2
Packaging
►
20 kg pails and 200 kg drums
Sika® Bituseal T140SG/T140MG/T130SG
4 mm thick, torch-on sheet waterproofing membrane based on APP
modified, reinforced bitumen, with slate finish – Flexible to 0°C
Use
►
Waterproofing on flat and exposed roofs.
►
Waterproofing and damp-proofing of the exterior
walls of base-ments against percolating water and
damp soil.
►
Waterproofing of retaining walls.
►
Waterproofing on flat roofs under protective layers
or ballast.
►
Waterproofing on flat and exposed roofs and under
tiles.
►
Waterproofing on balconies/terraces under tiles.
Packaging
►
10m / roll
Flooring / Coating
Sikafloor® - 2530W New
Water dispersed, colored floor sealer
Use
►
►
Packaging
►
For the production of colored sealing coats for
light and medium exposure. On concrete, cement
screed, epoxy mortar fiber cement boards, e.g. in
production and storage halls, show rooms,
garages, wet rooms, civil defense facilities. As
deicing salt protection on tunnel walls and
galleries not exposed to weathering.
See data sheet
10 kg/ set
Sikafloor® - 381
2-part highly chemically and mechanically resistant self smoothing epoxy coating
Use
►
►
~ 1.77 kg/ ltr (DIN EN ISO 2811-1)
►
~ 1.04 kg/ ltr
►
~ 1.6 kg/ ltr
Chemically and mechanically highly resistant
coating for concrete and screed surfaces in
bund areas for protection against water
contaminating liquids (according to the product
chemical resistance table)
Part A:
Part B:
Mixed resin:
►
All Density values at +23°C
Packaging
►
8.5 kg containers
►
1.5 kg containers
Part A:
Part B:
►
Part A+B: 10 kg ready to mix unit
Sika® Extender T
Thixotropic agent for resin
Use
►
Thixotropic agent for Sikafloor and Sikagard flooring
resins on
- Walls
- Skirtings/Flashings
- Slopes
►
Packaging
►
1.5 to 4% of the resin by weight depending on the
thixotropy required.
1 Kg bucket
27
Flooring / Coating
Sikafloor® - 264
2-part epoxy roller and seal coat
►
Roller coat for concrete and cement screed with
normal up to medium heavy wear eg. storage and
assembly halls, maintenance workshops, garages
and loading ramps.
Use
►
Seal coat for broadcast systems.
►
►
Packaging
►
See data sheet
International test certificates are available
20 kg/ set
Sikafloor® - 263 SL
2-part epoxy self-smoothing and broadcast system
►
Self-smoothing and broadcast systems for concrete
and cement screeds with normal up to medium heavy
wear e.g. storage and assembly halls, maintenance
workshops, garages, loading ramps etc.
Use
►
The broadcast system is recommended for wet
process areas, e.g. in beverage industry, food
industry, maintenance hangars etc.
►
►
Packaging
►
See data sheet
International test certificates are available
20 kg/ set
Sikafloor® - 161
2-part epoxy primer, levelling mortar, intermediate layer and
mortar screed
►
For priming concrete substrates, cement screeds
and epoxy mortars
Use
►
For normal to strong absorbent substrates
►
Primer for the Sikafloor epoxy systems
►
Binder for levelling mortars and mortar screeds
►
Packaging
►
See data sheet
10 kg/ set
Flooring / Coating
Sikafloor® - 81 EpoCem®
Self-levelling epoxy-cement floor topping
Use
►
Sikafloor® - 81 EpoCem® is used for self-levelling
screeds of 1.5 – 3 mm thickness:
- Temporary moisture barrier (min. 2-mm thick)
- Levelling or patching of concrete surfaces
- On concrete floor slabs without waterproofing
membrane, on damp substrates and where
aesthetic appearance is not a primary demand.
- Patching layer for epoxy coatings as well as for
industrial floor coatings
- Designed for all cementitious substrates
►
Packaging
►
See data sheet
23 kg/ set
Sikafloor® - 21 Purcem® FG
Medium to heavy duty self-smoothing polyurethane screed
Use
►
Sikafloor®-21 PurCem® FG is ideally suited for the
following areas:
- Chemical processing
- Food processing and wet areas
- Brewing and dairy (clean areas)
- Engineering process areas
- Heavy duty traffic and plant areas
- Warehouse / logistics areas
►
Packaging
►
See data sheet
20 kg/ set (component A+B+C+D)
Sikafloor® Chapdur®
Coloured mineral dry shake floor hardener
Use
►
For superficial reinforcing of floor surfacing and
slabs in order to increase the resistance to abrasion
and hence to reduce the formation of dust.
►
Suitable for use in all cases where floors are
subjected to severe mechanical wear and there
is a need to apply special hard wearing surface
coverings.
►
Packaging
►
3 - 6 kg per m2
25 kg/ bag
29
Flooring / Coating
Sikafloor® - 2 Syn Top
Dry shake floor hardener
►
Sikafloor® – 2 Syn Top provides a hard wearing, dry
shake topping for monolithic floors. When sprinkled
and trowelled into fresh wet concrete floors,it forms
a coloured,wear resistant smooth surface..
Use
►
Suitable for use in all cases where floors are
subjected to severe mechanical wear and there
is a need to apply special hard wearing surface
coverings.
►
Packaging
►
Approx. 5 kg per m2 (depend on type and project
requirements)
25 kg/ set
Roofing
Sikaplastic® - 450
Elastic, 1-part-polyurethane, liquid waterproofing membrane
►
Seamless coating on roofs and concrete structures,
which can also be used as a waterproofing
membrane on non trafficed. Not suitable for
permanent water immersion
Use
►
Can be applied on concrete, brickwork, asbestos
cement, roof tiles, roofing felt etc.
►
Wet areas
►
Deck Terrace and balcony under protective layer
►
For areas with specific official performance
requirements, please contact your local Sika
Company for advice on product selection.
►
~ 1.4 kg/ ltr (DIN EN ISO 2811-1)
►
All Density values at +23°C
►
7 kg, 21 kg containers.
Packaging
Sika® Sarnafil®
Sarnafil® membranes for roofing system
►
Exposed roof
Use
►
Roofgarden/ Utility deck
►
Pedestrian roof
►
Traffic roof
►
Light weight roof
►
Roof renovation
Consumption / Dosage
►
Refer to Technical datasheet.
1000 ltr. PVC Tank
Ep
o
uid
1kg Set
2kg Set
cts
o du
L iq
Pr
25 ltr. Pail
r
ts
uc
d
o
xy
P
200 ltr. Drum
15kg, 18kg PVC Pail
10kg Set
5 ltr. Pail
rP
ro d
Ot
he
w
rs
Po
de
ucts
1kg Nylon Bag
15m, 30m Roll
2kg, 5kg Nylon Bag
600ml Sausage
20kg, 23kg, 24kg, 25kg Paper Bag
NOTE:
The products contained in this catalogue are actively marketed and sold in Vietnam. However, the Sika group range extends to more than 3,000 products
worldwide.
Please contact Sika Limited (Vietnam) for more detailed information on the products presented here or advise on other Sika products or systems which for obvious
reason could not be included in this list.
DISCLAIMER:
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith base on Sika's
current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's
recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability
or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from
any written recommendations, or from any other advice offered. The user of the product must test the product's suitability for the intended application
and purpose. Sika reserves the right to change the properties of its products. The proprietary right of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the
product concerned, copies of which will be supplied on request.
31
DS
EL
FI
N
IO
AT
AP
PL
IC
INDUSTRIAL FACTORIES
WATER SUPPLY & WASTE WATER
TREATMENT PLANTS
THERMAL/HYDRO POWER PLANTS,
HYDRAULIC PROJECTS
CIVIL CONSTRUCTION, HIGHRISE BUILDINGS
INFRASTRUCTURE: CONCRETE ROADS, BRIDGES,
PORTS, AIRPORTS, RUN WAY, TUNNEL …
www.sika.com.vn
HEAD OFFICE/ FACTORY:
Nhon Trach 1 Industrial Zone,
Dong Nai Province, Vietnam
Tel: (84-61) 356 0700
Fax: (84-61) 356 0699
[email protected]
SALES OFFICE:
60 Nguyen Dinh Chieu St.,
Fl.3, District 1, HCMC.
Tel: (84-8) 3911 5550
Fax: (84-8) 3911 5551
HA NOI BRANCH:
57 Quang Trung St., Fl.7,
Hai Ba Trung Dist, Ha Noi.
Tel: (84-4) 3857 2934
Fax: (84-4) 3857 2936
DA NANG BRANCH:
155 Tran Phu St., Fl. 9,
Hai Chau Dist., Da Nang.
Tel: (84-511) 387 3351
Fax: (84-511) 387 3353
CAN THO BRANCH:
131 Tran Hung Dao St.,
Ninh Kieu Dist, Can Tho.
Tel: (84-710) 373 1272
Fax: (84-710) 373 1274

Construction - Sika Ltd. (Vietnam)

Transcription

Similar documents

case study jordan commons

case study frenchman`s reef

Case Study - Sika Corporation US

Product Brochure for Sikaflex 2c NS Caulk Polyurethane Sealant

case study bellaire tower

Bridge Deck Waterproofing on Sydney Harbour Bridge, Australia