E-1 Small Tool Instruments and Reference Gages Gage Blocks

Transcription

E
Small Tool Instruments and
Reference Gages
INDEX
Gage Blocks
Gage Blocks
Metric Rectangular Gage Block Set
Inch Rectangular Gage Block Set
Micrometer Inspection Gage Block Sets
Bore Gage Calibration Kit
Individual Metric Rectangular Gage Block
Individual Inch Rectangular Gage Block
Rectangular Gage Block with CTE
Rectangular Gage Block Accessories
Metric Square Gage Block Set
Inch Square Gage Block Set
Individual Metric Square Gage Block
Individual Inch Square Gage Block
Square Gage Block Accessories
Ceraston
Maintenance Kit for Gage Block
Step Master
Made-to-order Block & Reference
Gage Block Comparator GBCD-250
Gage Block Comparator GBCD-100A
Height Masters
Height Master
Digital Height Master
Riser Blocks
Auxiliary Block Kit
Universal Height Master
High Accuracy Check Master HMC-H
CERA Straight Master SM-C
Square Master
Reference Gages
Standard Scales
Working Standard Scales
High Precision Square
Spring Dividers and Calipers
Combination Square Set
Steel Rules
Semi-Flexible Rules
Thickness Gages
Precision Levels
Digital Universal Protractor
Universal Bevel Protractor
Bevel Protractor
Radius Gages
Pitch Gages
Radius Gages-Sets
Digital Protractor
Digital Hand Tachometers
Bench Center
Granite Surface Plate
Granite Surface Plate Accessories
Black Granite Surface Plate
Steel Stands
Height Master
Reference Gages
Granite Surface
Plates & Bench
Comparator
CERA/Steel
Combination
Gage Block Sets
Step Master
ZERO CERA BLOCK
Ceramic
Straight
Master
E-1
E-2-4
E-5,6
E-7
E-8
E-8
E-9,10
E-11
E-12
E-13-15
E-16
E-17
E-18
E-19
E-20,21
E-22
E-22
E-23
E-23
E-24
E-24
E-25
E-26
E-27
E-27
E-28
E-29
E-30
E-31
E-32
E-32
E-33
E-33
E-34
E-35,36
E-36
E-37
E-37
E-38
E-39
E-39
E-40
E-40
E-41
E-42
E-43
E-44
E-44
E-45
E-46
Gage Block
Selecting Gage Blocks
SERIES 516
FEATURES
Precision gage blocks are the primary
standards vital to dimensional quality control
in the manufacture of parts. Mitutoyo offers
a complete selection of gage blocks available
in a choice of rectangular or square, metric
or inch and steel or CERA (ceramic) types.
Accuracy
Gage blocks offered by an all-round precision measuring machine manufacturer, Mitutoyo,
guarantee such a high accuracy that users can use them without anxiety. Needless to say,
Mitutoyo has established a traceability system for our measurement products, up to the
Metrology Management Center of the National Institute of Advanced Industrial Science and
Technology (AIST) and we have been certified by the Japanese government as an accredited
laboratory.
• Select gage blocks in accordance with the combination
range required. If a large length is required, add a long
block set.
• Select gage blocks in accordance with the minimum length
step required. Add wear block sets if necessary.
• If a set containing a large number of gage blocks is
selected, the number of combination gage blocks required
for a length is reduced and the number of combinations is
increased. The accuracy will be retained and damage will
be reduced.
• The specific gage block set for micrometer inspection and
caliper inspection is available.
• If using only one length repeatedly, it is a good idea to
purchase discrete gage blocks.
• The 2mm-based gage blocks, which take the base of the
minimum length step as 2mm, are easy to handle and will
not warp, as compared to the 1mm-based gage blocks.
Wringing
The lapping technique is one of Mitutoyo’s specialties. Our advanced lapping technique,
developed for more than a half century, enables us to achieve the best flatness and surface
roughness needed for gage blocks and realize a great wringing force.
Abrasion Resistance and Dimensional Stability
High-carbon high-chrome steel is employed to sufficiently satisfy a variety of material
characteristics required for gage blocks. A high degree of hardness, obtained by our heat
treatment technology and that reassures users, as well as methodically repeated heat
treatment, have successfully reduced deterioration change over time to the minimum.
CERA Blocks
Rectangular Block
Gage Size
Up to 2”
Over .2” up to 40”
Up to 10mm
Over 10mm up to
1000mm
Face Width (A)
1.181”
1.378”
30mm
35mm
Face Depth (B)
.355”
.355”
9mm
9mm
Gage Size
Face Width (C)
Inch (up to 40”)
.95”
Metric (up to 1000mm) 24.1mm
Face Depth (D)
.95”
24.1mm
CERA blocks, made of ceramic materials with
superior surface quality, that were developed by
Mitutoyo’s ultra precision machining techniques
solve all problems that the steel gage block had.
Abrasion loss
1. Corrosion-Resistant
Anti-corrosion treatment is not required when
handled normally (i.e. with fingers), resulting
in simple maintenance and storage.
2. No Burrs Caused by Dents, etc.
Since the CERA Block is very hard, it will not
scratch and is highly resistant to burrs. If a
burr is formed, it can easily be removed with a
ceramic deburring stone (Ceraston).
(m)
Resistance to wear
3. Abrasion Resistant
CERA Blocks have 10 times the abrasion
0.4
resistance of steel gage blocks.
4. Dimensional Stability
0.2
CERA Blocks are free from dimensional
change over time.
0
5. Marking
2000
4000
The black characters, indicating the
nominal length, are inscribed by laser and are
clearly visible against the white surface of the
block.
E-2
Square Block
Steel
Silicon nitride
Tungsten
carbide
CERA Block
6000
8000
Amount of travel (m)
Grade and Application
Refer to the following table to select the gage block grade
according to usage.
Applications
Workshop use • Mounting tools and cutters
• Manufacturing gages
• Calibrating instruments
Inspection use • Inspecting mechanical parts, tools, etc.
• Checking the accuracy of gages
• Calibrating instruments
Calibration use • Checking the accuracy of gage blocks for workshop
• Checking the accuracy of gage
blocks for inspection
• Checking the accuracy of
instruments
Reference use • Checking the accuracy of gage
blocks for calibration
• For academic research
Grade
AS-1 or
AS-2
0 or AS-1
0 or AS-1
00 or 0
K or 00
K
Grade AS-1:
These gage blocks are intended for shop floor use
to set and calibrate fixtures as well as precision
instruments.
Grade 0:
This grade is used within an inspection area to verify
the accuracy of plug and snap gages as well as for
setting electronic measuring devices.
Grade 00:
These higher accuracy gages are intended for use
within a controlled environment by skilled inspection
staff. Mainly used as reference standards for setting
high precision measuring equipment and for the
calibration of lower grade gage blocks.
Grade K:
Gage blocks of this accuracy are intended for use
within a temperature controlled inspection room or
calibration laboratory. They should be used as masters
with certificates against other gage blocks which are
calibrated by comparison.
Combination of a Required Length
Multiple combinations of gage blocks can be used to make a
required length. Care should be exercised in the following
points.
1.Use as few gage blocks as possible to obtain the required
length. (= Select thick gage blocks whenever possible.)
2.Select gage blocks starting with the one that has least
significant digit required, and then work up to ones with
more significant digits.
3.There are multiple combinations for the integer part of
a length. To prevent wear as much as possible, do not
always use the same gage blocks.
Example combination
Required length = 45.6785mm
For the 1mm-based gage block set (112 pcs.)
1.0005
1.008
1.17
17.5
+25
45.6785mm
For the 2mm-based gage block set (112 pcs.)
2.0005
2.008
2.17
14.5
+25
45.6785mm
6. Anti-magnetic Nature Keeps Away
Steel Powders
7. High wringing force
An even, dense tissue can maintain a
strong wringing force.
8.Material of CERA block
Material
Property
Hardness (HV)
Coefficient of thermal expansion (10-6/K)
Flexural strength by 3-point bending (MPa)
Fracture toughness K1c (MPa•m1/2)
Young’s modulus x104 (MPa)
Poisson’s ratio
Specific gravity
Thermal conductivity (W/m•k)
CERA Block
(ZrO2)
1350
9.3±0.5
1270
7
20.6
0.3
6.0
2.9
9.Closest Expansion Coefficient to Steel
The thermal expansion coefficient of a
CERA Block is quite similar to that of a
steel gage block.
10. Highly Resistant Against Drops and
Other Shocks
The CERA Block material is one of the
toughest ceramics materials. It is extremely
difficult to crack under normal use.
Steel
(Fe)
800
10.8±0.5
1960
120
20.6
0.3
7.8
54.4
Carbide
(WC-Co)
1650
5.5±1.0
1960
12
61.8
0.2
14.8
79.5
Difference in
dimension (m) 3
Silicon nitride
(Si3N4)
1500
2
580
6.5
28.4
0.3
3.2
16.7
Silicon nitride
2
Tungsten carbide
1
17
18
CERA Block
19
20
-1
-2
-3
Features of Square Gage Blocks
1. Perfect wringing is possible using the center hole.
After wringing the square gage blocks, an optional tie rod
can be inserted through the center hole to fix the blocks
using a screw.
2. A height reference standard can easily be made.
A precision height reference standard can be made easily
and inexpensively using accessories such as the plain jaw
and block base.
3. A dedicated inspection jig can be easily be made.
A dedicated inspection jig for periodic inspection of
instruments can be made easily and inexpensively.
4. A wide measuring surface with cross section
dimensions of [24.1 x 24.1mm / .95 x .95”]
is available.
A square gage block can retain stable orientation both
longitudinally and laterally. A wide range of application
measurements can be made, including cutting tool
positioning, angle measurement with a sine bar, taper
measurement with a roller, and inspection of depth
micrometers.
Long and Ultra-Thin Gage Blocks
Mitutoyo offers extra thin gage blocks from 0.10 mm
to 0.99 mm (increments of 0.01 mm) as well as long
gage blocks up to 1,000 mm as standard products.
E-3
21
22
23
Temperature (C)
Differences in the dimension between
some materials and steel that are
obtained when measuring testpieces with
a length of 100mm at each temperature.
Gage Block
SERIES 516
Accuracies of Mitutoyo Gage Blocks
All Mitutoyo gage blocks meet or exceed all known specifications. The flatness, parallelism and surface finish necessary to
achieve the required accuracies are the same as or better than government requirements.
ASME (American Society of Mechanical Engineers) Deviations and Tolerance
on Length for Metric and inch Gage Blocks: ASME B89.1.9-2002 (USA)
Calibration Grade K
Grade 00
Grade 0
Grade AS-1
Grade AS-2
Limit
Limit
Limit
Limit
Limit
Nominal
Deviations
Deviations
Deviations
Deviations
Deviations
Length Range of Length Tolerance for of Length Tolerance for of Length Tolerance for of Length Tolerance for of Length Tolerance for
l n in inches at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation
From Nominal In Length
From Nominal In Length From Nominal In Length From Nominal In Length From Nominal In Length
tv µin.
tv µin.
tv µin.
tv µin.
Length
Length
Length
Length
Length
tv µin.
± te µin.
± te µin.
± te µin.
± te µin.
± te µin.
ln ≤ .05
.05 ln ≤ .4
.45 ln ≤ 1
1 ln ≤ 2
2 ln ≤ 3
3 ln ≤ 4
4 ln ≤ 5
5 ln ≤ 6
6 ln ≤ 7
7 ln ≤ 8
8 ln ≤ 10
10 ln ≤ 12
12 ln ≤ 16
16 ln ≤ 20
20 ln ≤ 24
24 ln ≤ 28
28 ln ≤ 32
32 ln ≤ 36
36 ln ≤ 40
12
10
12
16
20
24
32
32
40
40
48
56
72
88
104
120
136
152
160
2
2
2
2
2
3
3
3
4
4
4
4
5
6
6
7
8
8
10
Calibration Grade K
Nominal
Length
Range
l n in mm
ln ≤ 0.5
0.5 ln ≤ 10
10 ln ≤ 25
25 ln ≤ 50
50 ln ≤ 75
75 ln ≤ 100
100 ln ≤ 150
150 ln ≤ 200
200 ln ≤ 250
250 ln ≤ 300
300 ln ≤ 400
400 ln ≤ 500
500 ln ≤ 600
600 ln ≤ 700
700 ln ≤ 800
800 ln ≤ 900
900 l n ≤
1000
4
3
3
4
5
6
8
8
10
10
12
14
18
20
25
30
34
38
40
2
2
2
2
3
3
3
3
4
4
4
4
5
6
6
7
8
8
10
6
5
6
8
10
12
16
16
20
20
24
28
36
44
52
60
68
76
80
Grade 00
4
4
4
4
4
5
5
5
6
6
6
7
8
10
10
12
12
14
16
Grade 0
12
8
12
16
20
24
32
32
40
40
48
56
72
88
104
120
136
152
168
6
6
6
6
6
8
8
8
10
10
10
10
12
14
16
18
20
20
24
Grade AS-1
24
18
24
32
40
48
64
64
80
80
104
112
144
176
200
240
260
300
320
0.05
0.05
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.10
0.12
0.14
0.16
0.18
0.20
0.20
0.25
0.10
0.07
0.07
0.10
0.12
0.15
0.20
0.25
0.30
0.35
0.45
0.50
0.65
0.75
0.85
0.95
1.00
0.05
0.05
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.10
0.12
0.14
0.16
0.18
0.20
0.20
0.25
0.14
0.12
0.14
0.20
0.25
0.30
0.40
0.50
0.60
0.70
0.90
1.10
1.30
1.50
1.70
1.90
2.00
E-4
0.10
0.10
0.10
0.10
0.12
0.12
0.14
0.16
0.16
0.18
0.20
0.25
0.25
0.30
0.30
0.35
0.40
0.30
0.20
0.30
0.40
0.50
0.60
0.80
1.00
1.20
1.40
1.80
2.20
2.60
3.00
3.40
3.80
4.20
0.16
0.16
0.16
0.18
0.18
0.20
0.20
0.25
0.25
0.25
0.30
0.35
0.40
0.45
0.50
0.50
0.60
A Certificate of Inspection is furnished with all Mitutoyo
gage blocks with a serial number on the case and an
identification number on each block. The deviation of
each block is registered. For this inspection, each gage
block is measured relative to the upper level master
using a gage block comparator. Grade K gage blocks
are manufactured by absolute measurement using an
interferometer. The gage block set and discrete gage
block are supplied with a Certificate of Calibration. The
Certificate of Calibration specifies the deviation from the
nominal length. (Comparative measurement, however, is
performed for all square gage blocks.)
12
12
12
12
14
14
16
16
16
16
18
20
20
24
28
28
32
36
40
Grade AS-2
Limit
Limit
Limit
Limit
Limit
Deviations
Deviations
Deviations
Deviations
Deviations
Tolerance
for
Tolerance
for
Tolerance
for
Tolerance
for
Tolerance for
of Length
of Length
of Length
of Length
of Length
at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation
In Length From Nominal In Length From Nominal In Length From Nominal In Length
From Nominal
From Nominal In Length
tv µm
tv µm
tv µm
tv µm
tv µm
Length
Length
Length
Length
Length
± te µm
± te µm
± te µm
± te µm
± te µm
0.30
0.20
0.30
0.40
0.50
0.60
0.80
1.00
1.20
1.4
1.80
2.20
2.60
3.00
3.40
3.80
4.20
Mitutoyo Gage Blocks and
Inspection Certificates
0.60
0.45
0.60
0.80
1.00
1.20
1.60
2.00
2.40
2.80
3.60
4.40
5.00
6.00
6.50
7.50
8.00
0.30
0.30
0.30
0.30
0.35
0.35
0.40
0.40
0.45
0.50
0.50
0.60
0.70
0.70
0.80
0.90
1.00
A Certificate of Accuracy, traceable to the NIST, is
furnished with each MITUTOYO gage block set and
individual block
SERIES 516 — 1mm Base Block Set
Steel 112-block set
Steel 103-block set
Steel 47-block set
Provided with Inspection Certificate
CERA 112-block set
CERA 56-block set
CERA/Steel combination
47-block set
SPECIFICATIONS
1mm Base Block Set
Blocks
per set
112
103
87
56
47
Order No.
Steel
516-531-56
516-937-26
516-938-26
516-939-26
516-940-26
516-533-56
516-941-26
516-942-26
516-943-26
516-944-26
516-535-56
516-945-26
516-946-26
516-947-26
516-948-26
516-536-56
516-953-26
516-954-26
516-955-26
516-956-26
CERA
516-541-56
516-337-26
516-338-26
516-339-26
516-340-26
516-542-56
516-341-26
516-342-26
516-343-26
516-344-26
515-543-56
516-345-26
516-346-26
516-347-26
516-348-26
516-544-56
516-353-26
516-354-26
516-355-26
516-356-26
Grade
K
00
0
AS-1
AS-2
K
00
0
AS-1
AS- 2
K
00
0
AS-1
AS- 2
K
00
0
AS-1
AS-2
516-537-56
516-957-26
516-958-26
516-959-26
516-960-26
516-545-56
516-357-26
516-358-26
516-359-26
516-360-26
K
00
0
AS-1
AS-2
Blocks included in set
Size
1.0005
1.001 - 1.009
1.01 - 1.49
0.5 - 24.5
25 - 100
1.005
1.01 - 1.49
0.5 - 24.5
25 - 100
1.001 - 1.009
1.01 - 1.49
0.5 - 9.5
10 - 100
0.5
1.001 - 1.009
1.01 - 1.09
1.1 - 1.9
1 - 24
25 - 100
1.005
1.01 - 1.09
1.1 - 1.9
1 - 24
25 - 100
E-5
Step
Qty.
0.01
0.5
25
1
9
49
49
4
1
49
49
4
0.001
0.01
0.5
10
9
49
19
10
0.001
0.01
0.5
25
0.001
0.01
0.1
1
25
0.01
0.1
1
25
1
9
9
9
24
4
1
9
9
24
4
SERIES 516 — Long Block Set, Wear Block Set
Steel 8-block set
CERA 8-block set
SPECIFICATIONS
Long Block Set
Blocks
Order No.
per set
Steel
—
8
—
516-115-26
516-116-26
516-540-56
8
516-701-26
516-702-26
516-703-26
CERA
516-547-56
516-164-26
516-165-26
516-166-26
516-546-56
516-731-26
516-732-26
516-733-26
Grade
ASME
K
00
0
AS-1
K
00
0
AS-1
Size
Step
25-200
25
—
—
—
—
—
—
25
125 - 175
50
200 - 250
100
300 - 500
CERA 2-block set
Carbide 2-block
Qty.
8
—
—
—
3
2
3
Wear block
15
mm
SPECIFICATIONS
Wear Block Set
Blocks
Order No.
per set
Carbide
516-807-26
2
516-806-26
516-803-26
2
516-802-26
CERA
516-832-26
516-833-26
516-830-26
516-831-26
Grade
ASME
0
AS-1
0
AS-1
Size
Qty.
1
2
2
E-6
2
Wear
block
Inch Rectangular Gage Block Set
SERIES 516 — Inch Block Set, Thin Block Set, Long Block Set, Wear Block Set
SPECIFICATIONS
Inch Block Set
Blocks
per set
81
35
Order No.
Steel
516-549-56
516-901-26
516-902-26
516-903-26
516-904-26
516-550-56
516-913-26
516-914-26
516-915-26
516-916-26
Grade
CERA
516-557-56
516-301-26
516-302-26
516-303-26
516-304-26
516-558-56
516-313-26
516-314-26
516-315-26
516-316-26
Steel/CERA
—
—
516-302-27**
—
—
—
—
—
—
—
K
00
0
AS-1
AS-2
K
00
0
AS-1
AS-2
Size
Step
.0001
.1001 – .1009
.001
.101 – .149
.05
.05 – .95
1
1-4
Qty.
9
49
19
4
.10005
.1001 – .1009
.101 – .109
.11 – .19
.1 - .3
.5, 1, 2, 4
1
9
9
9
3
4
**CERA blocks are adopted for frequently-used blocks.
81-block set: All are CERA blocks. Except 2”, 3”, and 4” are Steel blocks
SPECIFICATIONS
Thin Block Set
Blocks
per set
28
10
Order No.
Steel
516-551-56
516-917-26
516-918-26
516-919-26
516-920-26
516-926-26
516-927-26
Grade
CERA
—
—
—
—
—
—
—
K
00
0
AS-1
AS-2
0
AS-1
Size
Step
.02005
.0001
.0201 – .0209
.001
.021 – .029
.01
.01 – .09
Qty.
1
9
9
9
.005 - .050
10
.005
SPECIFICATIONS
Long Block Set
Blocks
per set
8
8
Order No.
Steel
516-126-26
516-127-26
—
—
516-712-26
516-713-26
Grade
CERA
516-176-26
516-177-26
516-564-56
516-741-26
516-742-26
516-743-26
0
AS-1
K
00
0
AS-1
Size
Step
1-8
1
Qty.
8
5-7
8, 10, 12
16, 20
3
3
2
1
2
4
SPECIFICATIONS
Wear Block Set
Blocks
per set
2
2
Order No.
Carbide
516-809-26
516-808-26
516-805-26
516-804-26
Grade
CERA
516-836-26
516-837-26
516-834-26
516-835-26
0
AS-1
0
AS- 1
Size
Qty.
.05
2
.1
E-7
2
.0001
.001
.01
.1
Micrometer Inspection Gage Block Sets
SERIES 516
• Can be fixed a series of gage blocks to be
used for micrometer inspection.
• Can be measured in both vertical and
horizontal posture.
• Parallelism is measured by attaching the
optical parallel (optional accessory) to the
GB set.
Micro Checker
SPECIFICATIONS
Metric
Order No.
Applicable gage
block set
Applicable gage
block size (mm)
Inch/Metric
Micro Checker (holder only)
516-607
516-106-26, 516-107-26,
516-156-26, 516-157-26
2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6,
20.2, 22.8, 25
Metric Block Set
Blocks
Order No.
per set
Steel
516-103-26
10
516-101-26
516-106-26
10
516-107-26
Inch Block Set
Blocks
Order No.
per set
Steel
516-552-56
10
516-921-26
516-922-26
516-923-26
516-529-26*
10
9
516-554-56
516-929-26
516-930-26
516-931-26
—
9
—
516-934-26
516-935-26
* For QuantuMike
CERA
516-152-26
516-153-26
516-156-26
516-157-26
Order No.
Applicable gage
block set
Applicable gage
block size (inch)
Micro Checker (holder only)
516-608
516-921-26, 516-922-26,
516-923-26, 516-321-26,
516-322-26, 516-323-26
.105, .210, .315, .420, .5, .605,
.815, .920
Grade
0
AS- 1
0
AS-1
1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20, 25mm
2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25mm
• Optical parallel (t = 12mm)
Grade
CERA
516-559-56 K
516-321-26 00
516-322-26 0
516-323-26 AS-1
516-319-26* 0
516-561-56
516-333-26
516-334-26
516-335-26
516-563-56
516-329-26
516-330-26
516-331-26
.0625, .100, .125, .200, .250, .300, .500, 1, 2”
• Optical parallel (t = .5")
K
00
0
AS- 1
K
00
0
AS- 1
.105, .210, .315, .420, .500, .605, .710, .815, .920,
1”
.087, .189, .307, .409, .472, .598, .669, .772, .890,
1"
.0625, .100, .125, .200, .250, .300, .500, 1, 2”
Bore Gage Calibration Kit
SERIES 516
SPECIFICATIONS
Blocks
per set
9
Order No.
Carbide
516-120-26
Grade
0
Size
.04”, .08”, .16”, .2”, .4”, .8”, 1”, 2”, 3”
619018 (plain jaw 2 pc. set) and 619004 (160mm holder)
E-8
(Gage Blocks are optional)
Individual Metric Rectangular
Gage Block
FEATURES
•If using only one length repeatedly, it is a good
idea to purchase discrete gage blocks.
•Each gage block is supplied with a Certificate of
Inspection.
•Each Grade K gage block of ASME standard is
specially supplied with a Certificate of Calibration
which certificates that the gage block was
manufactured through interferometry.
Suffix Number for Selecting Standard
and Certificate Provided
ASME
Grade
K
00
0
AS-1
AS- 2
SPECIFICATIONS
Metric Block
Length (mm)
Steel, CERA
-516**
-521*
-531*
-541*
-551*
* provided with Inspection Certificate
**provided with Calibration Certificate and Inspection Certificate
Example: 611821-521
0.1mm gage block in grade 00.
We make custom length gage block length:
0.1-1000mm
Inspection Certificate
0.1
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.2
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.3
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.4
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.5
0.51
0.52
Order No.
Steel
611821
611860
611861
611862
611863
611822
611864
611865
611866
611867
611823
611868
611869
611870
611871
611824
611872
611873
611874
611875
611825
611876
611877
611878
611879
611826
611880
611881
611882
611883
611827
611884
611885
611886
611887
611828
611888
611889
611890
611891
611506
611892
611893
Length (mm)
CERA

—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
613506
—
—
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.6
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.7
0.71
0.72
0.73
0.74
0.75
0.76
0.77
0.78
0.79
0.8
0.81
0.82
0.83
0.84
0.85
0.86
0.87
0.88
0.89
0.9
0.91
0.92
0.93
0.94
0.95
Order No.
Steel
611894
611895
611896
611897
611898
611899
611900
611901
611902
611903
611904
611905
611906
611907
611908
611909
611910
611911
611912
611913
611914
611915
611916
611917
611918
611919
611920
611921
611922
611923
611924
611925
611926
611927
611928
611929
611930
611931
611932
611933
611934
611935
611936
E-9
Length (mm)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.96
0.97
0.98
0.99
0.991
0.992
0.993
0.994
0.995
0.996
0.997
0.998
0.999
1
1.0005
1.001
1.002
1.003
1.004
1.005
1.006
1.007
1.008
1.009
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.09
1.1
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
Order No.
Steel
611937
611938
611939
611940
611551
611552
611553
611554
611555
611556
611557
611558
611559
611611
611520
611521
611522
611523
611524
611525
611526
611527
611528
611529
611561
611562
611563
611564
611565
611566
611567
611568
611569
611570
611571
611572
611573
611574
611575
611576
611577
611578
611579
CERA
—
—
—
—
613551
613552
613553
613554
613555
613556
613557
613558
613559
613611
613520
613521
613522
613523
613524
613525
613526
613527
613528
613529
613561
613562
613563
613564
613565
613566
613567
613568
613569
613570
613571
613572
613573
613574
613575
613576
613577
613578
613579
E-10
Length (mm)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
613642
—
—
—
—
613613
613643
613614
613644
613615
613850
613645
613616
613646
613617
613647
613851
613618
613648
613619
613649
613671
613852
613650
613621
613651
613622
613652
613853
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
17.6
18
18.5
19
19.5
20
20.2
20.5
21
21.5
22
22.5
22.8
23
23.5
24
24.5
25
25.25
30
35
40
41.3
45
50
60
70
75
80
90
100
125
131.4
150
175
200
250
300
400
500
600
700
750
800
900
1000
Order No.
Steel
611623
611653
611624
611654
611625
611655
611626
611656
611627
611657
611854
611628
611658
611629
611659
611672
611855
611660
611631
611661
611632
611662
611856
611633
611663
611634
611664
611635
611754
611673
611755
611674
611857
611756
611675
611676
611677
611801
611678
611679
611681
611802
611858
611803
611804
611682
611805
611683
611684
611685
611840
611841
611842
611843
611844
611845
CERA
613623
613653
613624
613654
613625
613655
613626
613656
613627
613657
613854
613628
613658
613629
613659
613672
613855
613660
613631
613661
613632
613662
613856
613633
613663
613634
613664
613635
613754
613673
613755
613674
613857
613756
613675
613676
613677
613801
613678
613679
613681
613802
613858
613803
613804
613682
613805
613683
613684
613685
—
—
—
—
—
—
Metric Wear Block
Length (mm)
1
2
Order No.
Tungsten carbide
612611
612612
DIMENSIONS
Unit: mm
Nominal length:
0.1mm - 5.5mm
9
Length
-0.05
-0.2
Nominal
Value
Measuring
face
0
30 -0.3
2.17
2.18
2.19
2.2
2.21
2.22
2.23
2.24
2.25
2.26
2.27
2.28
2.29
2.3
2.31
2.32
2.33
2.34
2.35
2.36
2.37
2.38
2.39
2.4
2.41
2.42
2.43
2.44
2.45
2.46
2.47
2.48
2.49
2.5
2.6
2.7
2.8
2.9
3
3.5
4
4.5
5
5.1
5.5
6
6.5
7
7.5
7.7
8
8.5
9
9.5
10
10.3
10.5
11
11.5
12
12.5
12.9
Order No.
Steel
611717
611718
611719
611720
611721
611722
611723
611724
611725
611726
611727
611728
611729
611730
611731
611732
611733
611734
611735
611736
611737
611738
611739
611740
611741
611742
611743
611744
611745
611746
611747
611748
611749
611642
611750
611751
611752
611753
611613
611643
611614
611644
611615
611850
611645
611616
611646
611617
611647
611851
611618
611648
611619
611649
611671
611852
611650
611621
611651
611622
611652
611853
92123
Serial
number
Nominal length:
6mm - 10mm
9 -0.05
-0.2
Length
mm
Nominal
Value
0
30 -0.3
Length (mm)
CERA
613580
613581
613582
613583
613584
613585
613586
613587
613588
613589
613590
613591
613592
613593
613594
613595
613596
613597
613598
613599
613600
613601
613602
613603
613604
613605
613606
613607
613608
613609
613641
613516
613517
613518
613519
613612
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
92123
Serial
number
Measuring
face
Nominal length:
10.3mm - 100mm
9 -0.05
-0.2
Length
mm
0
35 -0.3
1.2
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.29
1.3
1.31
1.32
1.33
1.34
1.35
1.36
1.37
1.38
1.39
1.4
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.5
1.6
1.7
1.8
1.9
2
2.0005
2.001
2.002
2.003
2.004
2.005
2.006
2.007
2.008
2.009
2.01
2.02
2.03
2.04
2.05
2.06
2.07
2.08
2.09
2.1
2.11
2.12
2.13
2.14
2.15
2.16
Order No.
Steel
611580
611581
611582
611583
611584
611585
611586
611587
611588
611589
611590
611591
611592
611593
611594
611595
611596
611597
611598
611599
611600
611601
611602
611603
611604
611605
611606
611607
611608
611609
611641
611516
611517
611518
611519
611612
611690
611691
611692
611693
611694
611695
611696
611697
611698
611699
611701
611702
611703
611704
611705
611706
611707
611708
611709
611710
611711
611712
611713
611714
611715
611716
Nominal
Value
92123
Serial
number
Measuring
face
Nominal length 125mm - 1000mm
Length
9 -0.05
-0.2
x0.211
Nominal
Value
2-Ø10
x0.211
125
mm
0
35 -0.3
Length (mm)
92123
Measuring
face
Airy line
25 ± 0.5
Serial
number
25 ± 0.5
ASME
Grade
K
00
0
AS-1
AS-2
Individual Inch Rectangular Gage
Block
SPECIFICATIONS
Steel, CERA
-516**
-521*
-531*
-541*
-551*
Inch Block
* provided with Inspection Certificate
** provided with Calibration Certificate and
Example: 611310-521
.1" gage block in grade 00.
.004 - 20"
DIMENSIONS
Unit: Inch
Nominal length:
.004 - .25”
-.002
.354 -.008
Length
0
1.181 -.012
Nominal
Value
Measuring
face
92123
Serial
number
.354 -.002
-.008
Length
mm
0
1.181 -.012
Nominal length:
.3 - 4”
Nominal
Value
92123
Serial
number
Measuring
face
Nominal length:
.45 - 4”
-.002
.354 -.008
0
1.378 -.012
Length
mm
Nominal
Value
92123
Serial
number
Measuring
face
Nominal length 5 - 20”
Length
.354 -.002
-.008
Nominal
Value
2-Ø10
x0.211
5”
0
1.378 -.012
x0.211
92123
Measuring
face .984±.02
Order No.
Steel
.004
611304
.005
611305
.006
611306
.007
611307
.008
611308
.009
611309
.01
611310
.011
611311
.012
611312
.013
611313
.014
611314
.015
611315
.016
611316
.017
611317
.018
611318
.019
611319
.02
611320
.02005
611240
.0201
611231
.0202
611232
.0203
611233
.0204
611234
.0205
611235
.0206
611236
.0207
611237
.0208
611238
.0209
611239
.021
611321
.022
611322
.023
611323
.024
611324
.025
611325
.026
611326
.027
611327
.028
611328
.029
611329
.03
611330
.031
611331
.03125 (1/32) 611101
.032
611332
.033
611333
.034
611334
.035
611335
.036
611336
.037
611337
.038
611338
.039
611339
.04
611340
.041
611341
.042
611342
.043
611343
.044
611344
.045
611345
.046
611346
.046875 (3/64) 611102
.047
611347
.048
611348
.049
611349
.05
611105
Airy line
Serial
number
.984±.02
Order No.
Steel
.06
611106
.0625
611303
.07
611107
.078125 (5/64) 611103
.08
611108
.09
611109
.09375 (3/32) 611104
.1
611191
.100025
611111
.10005
611135
.100075
611112
.1001
611121
.1002
611122
.1003
611123
.1004
611124
.1005
611125
.1006
611126
.1007
611127
.1008
611128
.1009
611129
.101
611141
.102
611142
.103
611143
.104
611144
.105
611145
.106
611146
.107
611147
.108
611148
.109
611149
.109375 (7/64) 611110
.11
611150
.111
611151
.112
611152
.113
611153
.114
611154
.115
611155
.116
611156
.117
611157
.118
611158
.119
611159
.12
611160
.121
611161
.122
611162
.123
611163
.124
611164
.125
611165
.126
611166
.127
611167
.128
611168
.129
611169
.13
611170
.131
611171
.132
611172
.133
611173
.134
611174
.135
611175
.136
611176
.137
611177
.138
611178
Length (inch)
Length (inch)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
613103
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
613104
—
—
—
613105
E-11
Length (inch)
CERA
—
613303
—
613100
—
—
613101
613191
613110
613135
613111
613121
613122
613123
613124
613125
613126
613127
613128
613129
613141
613142
613143
613144
613145
613146
613147
613148
613149
613102
613150
613151
613152
613153
613154
613155
613156
613157
613158
613159
613160
613161
613162
613163
613164
613165
613166
613167
613168
613169
613170
613171
613172
613173
613174
613175
613176
613177
613178
.139
.14
.141
.142
.143
.144
.145
.146
.147
.148
.149
.15
.16
.17
.18
.19
.2
.21
.25
.3
.315
.35
.375 (3/8)
.4
.420
.45
.5
.55
.6
.605
.65
.7
.710
.75
.8
.815
.85
.9
.920
.95
1
2
3
4
5
6
7
8
10
12
16
20
Order No.
Steel
611179
611180
611181
611182
611183
611184
611185
611186
611187
611188
611189
611115
611116
611117
611118
611119
611192
611221
611212
611193
611209
611213
611113
611194
611210
611214
611195
611215
611196
611211
611216
611197
611220
611217
611198
611226
611218
611199
611227
611219
611201
611202
611203
611204
611205
611206
611207
611208
611222
611223
611224
611225
CERA
613179
613180
613181
613182
613183
613184
613185
613186
613187
613188
613189
613115
613116
613117
613118
613119
613192
613221
613212
613193
613209
613213
613112
613194
613210
613214
613195
613215
613196
613211
613216
613197
613220
613217
613198
613226
613218
613199
613227
613219
613201
613202
613203
613204
613205
613206
613207
613208
613222
613223
613224
613225
Inch Wear Block
Length (inch)
.05
.1
Order No.
Tungsten carbide
612105
612191
Rectangular Gage Block with CTE
Gage Blocks with Thermal Expansion Coefficient Data
FEATURES
•Mitutoyo offers top-level gage blocks (steel
and ceramic) which are superior to the K
class blocks, with their quality supported
by Mitutoyo’s best technologies.
double-faced interferometer (DFI)
•Comes with a highly accurate thermal
expansion coefficient measured with a
high accuracy double-faced interferometer
(DFI).
•The high accuracy gage block
interferometer (GBI) guarantees a high
dimensional accuracy.
•Mitutoyo offers rectangular gage blocks,
having nominal values from 100 to 500mm
Grade: K class in ASME
Uncertainty of thermal expansion coefficient:
0.035 x 10-6/K (k = 2)
Uncertainty of dimension measurement:
30nm (k = 2), for 100mm block
SPECIFICATIONS
Order No. Steel
611681-51B
611802-51B
611803-51B
611804-51B
611682-51B
611805-51B
611683-51B
611684-51B
611685-51B
ASME
Grade K
Steel, CERA
-51B
-51B: provided with JCSS Calibration Certificate and
Metric Block with CTE
Length (mm)
100
125
150
175
200
250
300
400
500
*Suffix Number for Selecting Standard
Inch Block with CTE
Order No. CERA
613681-51B
613802-51B
613803-51B
613804-51B
613682-51B
613805-51B
613683-51B
613684-51B
613685-51B
Length (inch)
4
5
6
7
8
10
12
16
20
Order No. Steel
611204-51B
611205-51B
611206-51B
611207-51B
611208-51B
611222-51B
611223-51B
611224-51B
611225-51B
Order No.CERA
613204-51B
613205-51B
613206-51B
613207-51B
613208-51B
613222-51B
613223-51B
613224-51B
613225-51B
ZERO CERA Blocks
• Complementary ultra-low thermal expansion
• Thermal expansion in the temperature
and high specific rigidity (Young's modulus/
range 20±1ºC less than 1/500 that of steel
specific gravity)
(0±0.02×10-6/K(20ºC))
• Almost no secular change both in dimension
and coefficient of thermal expansion
SPECIFICATIONS
Metric Blocks
Order No.
JIS/ISO/DIN
BS
617673-016 617673-116
617675-016 617675-116
617681-016 617681-116
617682-016 617682-116
617683-016 617683-116
617684-016 617684-116
617685-016 617685-116
617840-016 617840-116
617841-016 617841-116
617843-016 617843-116
617844-016 617844-116
617845-016 617845-116
516-771-60 516-771-61
E-12
ASME
617673-516
617675-516
617681-516
617682-516
617683-516
617684-516
617685-516
617840-516
617841-516
617843-516
617844-516
617845-516
516-771-66
Length (mm)
30
50
100
200
300
400
500
600
700
800
900
1000
Above set
SERIES 516 – For Gage Blocks over 100mm
Specially designed for the long gage blocks over
100mm which have two holes on the body for
coupling.
Accessories for gage blocks over 100mm
Order No. 516-605
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
3 pcs.
1 pc.
2 pcs.
1 pc.
1 pc.
Included in set
Holder A (619031)
Holder B (619032)
Holder C (619033)
Holder D (619034)
Holder E (619035)
Adaptor (619036)
Holder base 35mm (619009)
Half round jaw 12mm (619013)
Plain jaw (2 pc. set) (619018)
Scriber point (619019)
Note: These accessories can be used for inch rectangular gage
blocks.
516-605
Fixed pin
75
Adjustable
pin
27.5
Holder A: 619031
Used for coupling two long gage blocks.
SPECIFICATIONS
Holder B and C:
Used for coupling two long gage blocks together with other
gage blocks up to 35mm (Holder B) or 140mm (Holder C).
Also used for attaching jaws with two adapters.
L
Order No. R (max.) L
Holder B 619032
90mm 126mm
Holder C 619033
200mm 236mm
R
Holder D: 619034
Used for attaching to the holder base.
Holder E: 619035
Used for attaching to the holder base together with other
gage blocks up to 125mm. Used for attaching jaws with one
adapter.
40
65.5
70 - 175
210
Half round jaw: 619013
Holder base: 619009
Adaptor: 619036
Measuring face
13
35±0.0008
Finished surface
12±0.0005mm
25
9
Finished surface
75
Holder mount
Scriber point: 619019
50
Plain jaw: 619018 (2 pc. set)
20
8.5
20
9
9
160
Finished surface
E-13
Finished surface
SERIES 516
To expand the variety of rectangular gage
block (steel and CERA) applications, Mitutoyo
offers the gage block accessories set. By
assembling the items in the set, you can easily
and quickly build up a precision measuring
instrument.
516-601
516-602
SPECIFICATIONS
Assortment of Accessories
Order No.
Accessories
619002
619003
619004
619005
619009
619010
619011
619012
619013
619014
619018
619019
619020
619021
619022
619023
Holder 60mm
Holder 100mm
Holder 160mm
Holder 250mm
Holder Base 35mm
Half round jaw 2mm
Half round jaw 5mm
Half round jaw 8mm
Half round jaw 12mm
Half round jaw 20mm
Plain jaw (2 pc. set) 160mm
Scriber point
Center point
Tram point
Triangular straightness edge 100mm
Triangular straight edge 160mm
Total Qty. in set
Metric Set Order No.
516-601
516-602
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
22 pcs.
14 pcs.
E-14
Accessory (s)
included in a set
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
2 pcs.
1 pc.
1 pc.
Holder:
Used as a clamp if using plain jaws, scriber point, etc.
Holder base 35mm: 619009
Measures a height on the surface plate and scribes a
workpiece if used with the holder.
L
Finished surface
A
Finished surfaces
Holder mount
Clamp
Finished surface
Order No.
619002
619003
619004
619005
Order No.
619009
Finished surface
Adapter
L
15 - 61mm
4 - 106mm
62 - 165mm
153 - 256mm
Scribes a workpiece if used with the holder and holder base.
50mm
9mm
Center point: 619020
Scribes a workpiece if used with the holder and holder base.
Finished surface
Tram point: 619021
Inspects the scale of the height gage, etc., if used with the
holder and holder base.
60
Finished
surface
30
8.5mm
8.5mm
Finished
surface
A
35±0.005mm
8.5mm
L
50mm
50mm
9mm
9mm
Plain jaw: 619018
Measures an outside or inside diameter if used with a pair
of jaws and the holder.
20
A
20
Triangular straight edge: Measures parallelism.
9
60
L
L
A
60
Finished surface
Order No.
619018*
* 2 pc. set
Order No.
619022
619023
L
160mm
Half round jaw:
Measures an outside or inside diameter if used with a pair of
jaws and the holder.
B
9mm
A
H
Order No.
619010
619011
619012
619013
619014
C
B
9mm
A
H
C
E-15
L
100mm
160mm
H
2±0.0005mm
5±0.0005mm
8±0.0005mm
12±0.0005mm
20±0.0005mm
A
6mm
6mm
12mm
25mm
25mm
B
40mm
50mm
60mm
75mm
125mm
C
8mm
8mm
8mm
13mm
20.5mm
Metric Square Gage Block Set
SERIES 516 — Metric Block Set, Long Block Set, Wear Block Set
A Square Gage Block can retain stable
orientation both longitudinally and laterally. A
wide range of application measurements can
be made, including cutting tool positioning,
angle measurement with a sine bar, taper
measurement with a roller, and inspection of
depth micrometers.
Steel 32-block set
Steel 76-block set
Steel 103-block set
Steel 112-block set
SPECIFICATIONS
Metric Block Set
Blocks
per set
112
103
76
47
32
Order No.
Steel
516-437-26
516-438-26
516-439-26
516-440-26
—
516-441-26
516-442-26
516-443-26
516-444-26
516-449-26
516-450-26
516-451-26
516-452-26
—
516-457-26
516-458-26
516-459-26
516-460-26
516-465-26
516-466-26
516-467-26
516-468-26
—
—
Grade
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
00
0
AS-1
AS-2
—
00
0
AS-1
AS-2
00
0
AS-1
AS-2
—
00
0
AS-1
AS-2
—
00
0
AS-1
AS-2
—
Size
Step
1.005
0.001
1.001 - 1.009
0.01
1.01 - 1.49
0.5
0.5 - 24.5
25
25 - 100
1.005
0.01
1.01 - 1.49
0.5
0.5 - 24.5
25
25 - 100
1.005
0.01
1.01 - 1.49
0.5
0.5 - 9.5
10
10 - 40
25
50 - 100
1.005
0.01
1.01 - 1.09
0.1
1.1 - 1.9
1
1 - 24
25
25 - 100
1.005
0.01
1.01 - 1.09
0.1
1.1 - 1.9
1
1-9
10
10 - 30
60
Qty.
1
9
49
49
4
1
49
49
4
1
49
19
4
3
1
9
9
24
4
1
9
9
9
3
1
Size
Step
25
125, 150, 175
50
200, 250
100
300, 400, 500
Qty.
3
2
3
Size
Step
1
—
Qty.
2
2
2
Metric Long Block Set
Blocks
per set
8
Order No.
Steel
516-751-26
516-752-26
516-753-26
516-754-26
Grade
CERA
—
—
—
—
00
0
AS-1
AS-2
Metric Wear Block Set
Blocks
per set
2
2
Order No.
Carbide
516-820-26
516-821-26
516-822-26
516-823-26
Grade
CERA
—
—
—
—
0
AS-1
0
AS-1
E-16
—
Inch Square Gage Block Set
SERIES 516 — Inch Block Set, Long Block Set, Wear Block Set
SPECIFICATIONS
Inch Block Set
Blocks
per set
81
36
28
Order No.
Steel
516-401-26
516-402-26
516-403-26
516-404-26
516-421-26
516-422-26
516-423-26
516-424-26
CERA
516-201-26
516-202-26
516-203-26
516-204-26
516-221-26
516-222-26
516-223-26
516-224-26
00
0
AS-1
AS-2
00
0
AS-1
AS-2
516-417-26
516-418-26
516-419-26
516-420-26
—
—
—
—
00
0
AS-1
AS-2
Grade
Size
Step
.0001
.1001 - .1009
.001
.101 - .149
.05
.05 - .95
1
1-4
.05”
.0001
.1001 - .1009
.001
.101 - .109
.01
.11 - .19
.1
.1 - .5
1
1, 2, 4
.02005”
.0001
.0201 - .0209”
.001
.021 - .029”
.01
.021 - .029”
.10 - .090”
Qty.
9
49
19
4
1
10
9
9
5
3
1
9
9
9
Inch Long Block Set
Blocks
per set
8
Steel 47-block set
Order No.
Steel
516-762-26
516-763-26
Grade
CERA
—
—
0
AS-1
Size
Step
1
5-7
2
8, 10, 12
4
16, 20
Qty.
3
3
2
Size
Step
.05
—
Qty.
2
.1
2
Inch Wear Block Set
Blocks
per set
2
2
Steel 8-block set
Order No.
Carbide
516-824-26
516-825-26
516-826-26
516-827-26
0
AS-1
0
AS-1
—
92 pcs. Gage Blocks with accessories set in wooden box
Blocks in set Order No.
Steel
516-405-26
92
Carbide 2-block set
Grade
CERA
516-846-26
516-847-26
516-844-26
516-845-26
Grade Blocks included in set
Size
Step
0
.0625
.078125
.09375
.100025
.10005
.100075
.109375
.1001 - .1009 .0001
.101 - .149
.001
.05 - .95
.05
.16 - .19
.01
1 4
1
Qty
1
1
1
1
1
1
1
9
49
4
19
4
E-17
Individual No. Description
Qty.
619052
619051
619055
619057
619058
619056
619066
619059
619062
619063
619064
619065
2
2
1
2
2
2
2
2
1
1
1
1
Plain Jaw .500”
Half round jaw .250”
Holder base .500”
Flat head screw 1 1/4”
Flat head screw 5/8”
Stud
Knurled head screw
Slotted head nut
Tie rod 3”
Tie rod 2 1/4”
Tie rod 1 1/2”
3/4”
Individual Metric Square Gage Block
ASME
Grade
K
00
0
AS-1
AS-2
Steel
—
-521*
-531*
-541*
-551*
*provided with Inspection Certificate
Example: 614611-521
1mm gage block in grade 00.
0.5 - 500mm.
SPECIFICATIONS
Metric Block
Length (mm)
0.5
1
1.0005
1.001
1.002
1.003
1.004
1.005
1.006
1.007
1.008
1.009
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.09
1.1
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.2
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.29
1.3
1.31
1.32
Order No.
Steel
614506
614611
614520
614521
614522
614523
614524
614525
614526
614527
614528
614529
614561
614562
614563
614564
614565
614566
614567
614568
614569
614570
614571
614572
614573
614574
614575
614576
614577
614578
614579
614580
614581
614582
614583
614584
614585
614586
614587
614588
614589
614590
614591
614592
Length (mm)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1.33
1.34
1.35
1.36
1.37
1.38
1.39
1.4
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.5
1.6
1.7
1.8
1.9
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
10.5
11
11.5
12
12.5
Order No.
Steel
614593
614594
614595
614596
614597
614598
614599
614600
614601
614602
614603
614604
614605
614606
614607
614608
614609
614641
614516
614517
614518
614519
614612
614642
614613
614643
614614
614644
614615
614645
614616
614646
614617
614647
614618
614648614619
614649
614671
614650
614621
614651
614622
614652
E-18
Length (mm)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
30
40
50
60
75
100
125
150
175
200
250
300
400
500
Order No.
Steel
614623
614653
614624
614654
614625
614655
614626
614656
614627
614657
614628
614658
614629
614659
614672
614660
614631
614661
614632
614662
614633
614663
614634
614664
614635
614673
614674
614675
614676
614801
614681
614802
614803
614804
614682
614805
614683
614684
614685
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Metric Wear Block
Length
(mm)
1
2
Order No.
Tungsten carbide
615611
615612
ASME
Grade
K
00
0
AS-1
AS-2
SPECIFICATIONS
Steel, CERA
—
-521*
-531*
-541*
-551*
Inch Block
Length (inch)
*provided with Inspection
Certificate
Example: 614310-521
.01" gage block in grade 00.
.01 - 20"
DIMENSIONS
Unit: mm
Length
Nominal length: 0.5mm - 4.5mm
(.010" - .19")
24.1±0.1
(.95”)
24.1±0.1
(.95”)
Measuring face
6.7±0.1 On both sides
(.264”)
0.010
Nominal Value
92123
Serial number
Length
Nominal length: 5mm - 14.5mm
(.02" - .450")
Nominal Value
.200
77±2°
Ø9.3
92123
Serial number
24.1±0.1
(.95”)
24.1±0.1
(.95”)
6.7±0.1
(.264”)
Measuring face
Nominal length: 15mm - 500mm
(.500" - 20")
1
IN
Serial number
77±2°
Length
Nominal Value
92123
24.1±0.1
(.95”)
24.1±0.1
(.95”)
6.7±0.1
(.264”)
Individual Inch Square Gage Block
Ø9.3
.01
.02005
.0201
.0202
.0203
.0204
.0205
.0206
.0207
.0208
.0209
.02
.021
.022
.023
.024
.025
.026
.027
.028
.029
.03
.03125 (1/32)
.04
.046875 (3/64)
.05
.06
.0625
.07
.078125 (5/64)
.08
.09
.09375 (3/32)
.1
.100025
.10005
.100075
.1001
.1002
.1003
.1004
.1005
.1006
.1007
.1008
.1009
.101
.102
.103
.104
.105
Order No.
Steel
614310
614240
614231
614232
614233
614234
614235
614236
614237
614238
614239
614320
614321
614322
614323
614324
614325
614326
614327
614328
614329
614330
614301
614340
614302
614105
614106
614303
614107
614304
614108
614109
614305
614191
614307
614135
614308
614121
614122
614123
614124
614125
614126
614127
614128
614129
614141
614142
614143
614144
614145
Order No.
Steel
.106
614146
.107
614147
.108
614148
.109
614149
.109375 (7/64) 614306
.11
614150
.111
614151
.112
614152
.113
614153
.114
614154
.115
614155
.116
614156
.117
614157
.118
614158
.119
614159
.12
614160
.121
614161
.122
614162
.123
614163
.124
614164
.125
614165
.126
614166
.127
614167
.128
614168
.129
614169.13
614170
.131
614171
.132
614172
.133
614173
.134
614174
.135
614175
.136
614176
.137
614177
.138
614178
.139
614179
.14
614180
.141
614181
.142
614182
.143
614183
.144
614184
.145
614185
.146
614186
.147
614187
.148
614188
.149
614189
.15
614115
.16
614116
.17
614117
.18
614118
.19
614119
.2
614192
Length (inch)
CERA
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
616105
—
616303
—
—
—
—
—
616191
—
616135
—
616121
616122
616123
616124
616125
616126
616127
616128
616129
616141
616142
616143
616144
616145
Measuring face
E-19
Length (inch)
CERA
616146
616147
616148
616149
—
616150
616151
616152
616153
616154
616155
616156
616157
616158
616159
616160
616161
616162
616163
616164
616165
616166
616167
616168
616169
616170
616171
616172
616173
616174
616175
616176
616177
616178
616179
616180
616181
616182
616183
616184
616185
616186
616187
616188
616189
616115
616116
616117
616118
616119
616192
.25
.3
.35
.375 (3/8)
.4
.45
.5
.55
.6
.65
.7
.75
.8
.85
.9
.95
1
2
3
4
5
6
7
8
10
12
16
20
Order No.
Steel
614212
614193
614213
614309
614194
614214
614195
614215
614196
614216
614197
614217
614198
614218
614199
614219
614201
614202
614203
614204
614205
614206
614207
614208
614222
614223
614224
614225
CERA
616212
616193
616213
—
616194
616214
616195
616215
616196
616216
616197
616217
616198
616218
616199
616219
616201
616202
616203
616204
—
—
—
—
—
—
—
—
Inch Wear Block
Length
(inch)
.05
.1
Order No.
Tungsten carbide
615105
615191
Square Gage Block Accessories
SERIES 516
To expand the variety of Square Gage Block
applications, Mitutoyo offers the Gage Block
Accessories Set. By assembling the items in
the set, you can easily and quickly build up a
precision measuring instrument.
516-611
SPECIFICATIONS
Inch
Metric
Order No. 516-611
2 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
Included in set
Plain jaw (619072)
Center point (619073)
Block base (619074)
Flat head screw 1·1/4" (619057)
Flat head screw 5/8" (619058)
Slotted head nut (619059)
Adjustable tie rod 6" (619060)
Adjustable tie rod 4·1/2" (619061)
Tie rod 3" (619062)
Tie rod 2·1/4" (619063)
Tie rod 1·1/2" (619064)
Tie rod 3/4" (619065)
Stud (619056)
Knurled head screw (619066)
E-20
Order No. 516-612
2 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
Included in set
Half round jaw .125" (619050)
Half round jaw .25" (619051)
Plain jaw (619052)
Center point (619053)
Block base (619055)
Flat head screw 1·1/4" (619057)
Flat head screw 5/8" (619058)
Slotted head nut (619059)
Adjustable tie rod 6" (619060)
Adjustable tie rod 4·1/2" (619061)
Tie rod 3" (619062)
Tie rod 2·1/4" (619063)
Tie rod 1·1/2" (619064)
Tie rod 3/4" (619065)
Stud (619056)
Knurled head screw (619066)
Stud: 619056
Half round jaw:
Used to measure an inside or outside diameter.
L
H
Ø4.166
16
R
ø6.7
W
24.7
P=0.7938
No.8-32UNC
Finished surface
Flat head screw
Order No.
619070
619071
619050
619051
R
1.95mm
4.95mm
.123”
.248”
L
2mm
5mm
.125”
.25”
W
33.6mm
39.9mm
33.6mm
39.9mm
H
5.3mm
10.3mm
5.3mm
10.3mm
L
No.8-32UNC
d=4.166 P=0.7938
Order No.
619057
619058
Plain jaw: 619072 (10mm), 619052 (.5")
Used to measure an inside or outside diameter.
Slotted head nut: 619059
24.7
9
L
31.6mm
15.8mm
15.8
10±0.001
Finished surface
ø6.35
39.9
ø6.7
No.8-32UNC
d=4.166 P=0.7938
Finished surface
Knurled head screw: 619066
Center point: 619073 (2mm), 619053 (.1")
Used to scribe a workpiece.
30
ø9
7.8
2±0.01
12
ø6.7
24.7
No.8-32UNC
d=4.166 P=0.7938
Finished
surface
39.9
Tie rod
Used to scribe a workpiece.
No.8-32UNC
d=4.166 P=0.7938
24.7
5.14
Finished surface
ø6.7
Order No.
619065
619064
619063
619062
Base: 619074 (10mm), 619055 (.5")
Used as clamps by inserting them into the center hole of a
square gage block.
P
58
Adjustable tie rod
n (number of holes)
L
19mm
38mm
57mm
76mm
ø6.35
7.5µm or less
39.9
Stud bolt
ø6.35
L
L
Finished surface
Finished surface
No.8-32UNC
d=4.166 P=0.7938
10±0.0005
ø6.7
Order No.
619060
619061
E-21
L
P
124.5mm 6.35mm
86.5mm 6.35mm
n
14
8
Ceraston
Accessory for Gage Blocks
FEATURES
•Alumina-ceramic grinding stone for
removing burrs from hard materials such
as ceramics that ordinary grinding stones
cannot handle.
•Can be used both for steel gage blocks
and CERA Blocks.
Removing burrs
601644
601645
SPECIFICATIONS
Order No.
601645
601644
Dimensions (W x D x H)
100 x 25 x 12mm
150 x 50 x 20mm
Mass
110g
530g
(1) Wipe any dust and oil films from the gage block and the
Ceraston (or Arkansas stone) using a solvent.
(2) Place the gage block on the Ceraston so that the
measuring face that has burrs is on the abrasive surface of
the stone. While applying light pressure, move the gage
block to and fro about ten times (Fig. 1). Use a block rubber
for thin gage blocks to apply even pressure (Fig. 2).
(3) Check the measuring face for burrs with an optical flat. If
the burrs have not been removed, repeat step (2). If burrs are
too large, they may not be removed with a grinding stone. If
so, discard the gage block.
Maintenance Kit for Gage Block
SERIES 516
CERASTON
(Arkansas stone)
FEATURES
•Includes all necessary maintenance tools
for daily care and storage of gage blocks.
•Supplied in a fitted wooden case for
portable use.
Rubber
CERASTON
(Arkansas stone)
Note: The abrasive surface of a Ceraston must be made flat by
lapping it from time to time. After lapping the Ceraston, the
lapping powder must be completely removed from the surface to
prevent the surface of the gage block from being scratched.
Mitutoyo does not handle the Arkansas stone.
516-650E
SPECIFICATIONS
Order No.
516-650E
Assortment of tools and accessories
Ceraston (601645): Used for removing burrs on the measuring surface
Optical flat (600003): Used for checking whether burrs exist.
Tweezers (600004): Used for handling thin gage blocks.
Blower brush (600005): Used for blowing out dust on the measuring surface.
Cleaning paper (600006): Used for wiping off rust preventive oil and contamination.
Artificial leather mat (600007): Used as a gage block mat.
Reagent bottle (600008): Bottle of wiping solution (100mL)
Gloves
E-22
Step Master
SERIES 516
FEATURES
Step master is a master gage used for
the z-axis (vertical direction) calibration of
optical instruments.
•Each adjacent step is measured down to
0.01µm by using a interferometer within
±0.20µm allowance.
•Steel and ceramic types are available.
Dimension
Block No.
2
3
4
5
15
25
1
µm
516-498
Ceramic type
R
20
Adjacent step
6
(Max. height)
300 100 50
7 7 7 7 7
45
Magnified view of step
516-199
Steel type
SPECIFICATIONS
Metric
Order No.
Step value between adjacent blocks
No. 1 - No. 2 No. 2 - No. 3 No. 3 - No. 4
10µm
5µm
2µm
300µm
100µm
50µm
10µm
5µm
2µm
300µm
100µm
50µm
516-198
516-199
516-498
516-499
Remarks
No. 4 - No. 5
1µm
20µm
1µm
20µm
Steel type
Steel type
Ceramic type
Ceramic type
Made-to-order Block & Reference
Available Dimension
FEATURES
Nominal size:
.004 to 20” / 0.1 to 1000mm (steel)
.1 to 20” / 0.5 to 500mm (ceramic)
Nominal pitch:
0.0005mm (up to 100mm)
0.001mm (over 100mm)
Minimum section dimension:
Approx. .24 x .24” / 6 x 6mm
Maximum section dimension:
Approx. 5.5 x 5.5” / 140 x 140mm (steel)
Approx. 6.3” Dia. / ø160mm
(steel, cylindrical)
Approx. 3.94 x 1.97” / 100 x 50mm
(ceramic)
Approx. .24” Dia. / ø60mm
(ceramic, cylindrical)
Accuracy:
Gage Block Grade level
•Mitutoyo can provide Gage Blocks and
reference gages to you size and design.
Special materials of low expansion glass and low expansion
ceramic are available.
P
O
Q
R
B
C
E
A
S
D
F
L
G
H
K
I
M
T
O: Steel Long rectangular block (15 x 10 x 200mm)
P: Ceramic square block (24.1 x 24.1 x 12.3mm)
Q: Steel thin rectangular block (30 x 6 x 1.9mm)
R: Steel square block (9 x 9 x 6mm)
S: Steel thin rectangular block (30 x 6 x 2.1mm)
T: Steel cylindrical bock (ø13.08 x 12mm)
J
A: Ceramic rectangular gage block (21.94mm)
B: Ceramic square gage block (2.1005mm)
C: Steel square gage block (10.72mm)
D: Steel square gage block (2.2065mm)
E: Ceramic rectangular gage block (20.64mm)
F: Steel rectangular gage block (31.5mm)
G: Ceramic rectangular gage block (6.34mm)
H: Steel rectangular gage block (3.603mm)
I: Steel rectangular gage block (1.1505mm)
J: Steel rectangular gage block (0.555mm)
K: Steel rectangular gage block (6.156mm)
L: Steel rectangular gage block (9.694mm)
M:Steel rectangular gage block (10.02mm)
U
V
W
U: Cylindrical reference block for depth micrometer
(ø60 x 150mm)
V: Ceramic reference plate (50 x 50 x 50mm, flatness 0.3µm)
W:Ceramic stepped block (30 x 18 x 5mm, step: 0.15mm)
E-23
Gage Block Comparator GBCD-250
SERIES 565 — Manual Type Comparator with Dual Gage Heads
Optional Accessories
FEATURES
962723:
Gage head calibration kit
02ASD130: Square gage block holder kit
02ASF040: Heat protection shield
02ASQ953: GBPAK-M (Included Software)
937179T: Foot Switch
936937:
Connecting cable
•Gage blocks between 0.1mm and 250mm
can be easily compared with the standard
gage block on the GBCD-250.
•The differential dual gaging heads
assure the operator of a high-accuracy
measurement with ease of use.
SPECIFICATIONS
Inch/Metric
Model No.
Order No.
Range
Resolution
Accuracy in narrow
range (20°C)
Measuring units
Operating condition
Data output
Dimensions
(W x D x H)
Mass
GBCD-250
565-150A
0.1mm - 250mm / .004 - 10"
0.00001mm (0.01µm) / .000001"
±(0.03+0.3L/1000)µm*
L = Gage block length (mm)
Laser Hologage (upper), Muchecker (lower)
Temperature: 20°C ±1°C
Humidity: 58%RH ±15%RH
Via SPC output port
Main unit: 455 x 318 x 691mm
Display unit: 345 x 397 x 187mm
Main unit: Approx. 50kg
Display unit: Approx. 9kg
*95% confidence interval (not including the calibration error of the standard gage block).
Gage Block Comparator GBCD-100A
SERIES 565 — Automatic Type Comparator with Dual Gage Heads
SPECIFICATIONS
Model No.
Order No.
Resolution
Range
Measuring unit
Accuracy in narrow
range (20°C)
Measuring force
Air requirement
Operating condition
Dimensions
(W x D x H)
Mass
Standard Accessories
GBCD-100A
565-160A
0.00001mm (0.01µm) / .000001"
0.5mm - 100mm / .02 - 4"
Differential (dual-head) type MuChecker
±(0.03+0.3L/1000)µm*
L = Gage block length (mm)
Upper gage head: 1N (100gf)
Lower gage head: 0.6N (60gf)
400kPa (4kgf/cm2)
Temperature: 20°C ±1°C
Humidity: 58%RH ±15%RH
Main unit: 710 x 366 x 783mm
Electronic unit: 160 x 410 x 382mm
Main unit: 120kg
Electronic unit: 14kg
*95% confidence interval (not including the calibration error of the standard gage block).
E-24
GBPAK-A (software)
The GBCD-100A Automatic Gage Block
Comparator is an easy-to-operate dualhead type gage block inspecting system. It
automatically compares workpieces with
a standard gage block and determines
accuracies of such as central length,
maximum length, minimum length, and
parallelism through the operation of an
optional personal computer.
962723:
962764:
613615-03:
218-007:
Gage block set for probe calibration
Gage block holder for probe calibration
5mm gage block (glade 1) for origin setting
Work bench
PC System
Height Master
SERIES 515
FEATURES
Technical Data
Graduation:
.00001" or0.001mm
Counter resolution: .001” or 0.01mm
Character Height:
.16" / 4mm
Micrometer Head
Travel stroke:
1” or 20mm
Pitch:
.025”/rev or 0.5mm/rev
Hysteresis:
.00004” or 1µm
Provided with inspection certificate.
•Models with staggered arrangement of
block stack have two measuring faces
on the same level, one facing up and the
other down (except for 515-310).
•Each Height Master is supplied with a gage
block for zero-setting.
•Supplied in fitted wooden case.
Reference Block: 11mm for 515-322
Reference Block: .3" for 515-310, 515-311
515-112:
515-119:
515-121:
––––––:
Auxiliary block kit for bore gage (mm)
Auxiliary block kit for bore gage (for 515-310)
Auxiliary block kit for bore gage (for 515-311)
Riser block
Staggered 20mm
blocks (movable)
Vertical orientation
Reading
Riser block
3
2
515-322
A
515-310
A
Height A
1. Scale 280. mm
2. Counter 5.67 mm
3. Thimble 0.000mm
285.670mm
1
SPECIFICATIONS
Metric
Range (H)
Order No.
5 < H ≤ 310mm
Block step
Parallelism Micrometer Head
of Block
Accuracy
1µm
±1µm
Mass (kg)
515-322
Graduation Block Pitch
Accuracy
20mm (staggered) 0.001mm ±1.5µm
Range (H)
Order No.
Block step
Mass (kg)
.2” < H ≤ 12.2”
.2” < H ≤ 12.2”
515-310
515-311
.5” (straight)
1” (staggered)
Parallelism
of Block
.00004”
.00004”
23
Inch
Accuracy
.00001”
±.00005”
.00001”
±.00005”
E-25
Micrometer Head
Accuracy
±.00005”
±.00005”
23
23
Digital Height Master
SERIES 515
FEATURES
•Standard model with a digital display,
featuring all essential specifications required
for versatile height standard.
•With SPC output.
•Each Height Master is supplied with a gage
block for zero setting.
Technical Data
Resolution (LCD):
Graduation:
Character Height
.0001" or 0.001mm
.0001" or 0.002mm
.21" / 5.4mm
Micrometer Head
Travel Stroke:
Pitch:
Hystersis:
Battery:
Battery life:
1" or 20mm
.025"/rev or 0.5mm/rev
.0001" For all inch models
0.002mm for 300mm models
0.0025mm for 450 & 600mm models
SR44 (2 pcs.), 938882
Approx. 1.8 years under normal use
Function
Zero-setting, Presetting, ABS/INC switching, Data hold, Data
output, inch/mm conversion (on inch/metric models only)
Alarm:
Low voltage, Counting value composition error
Staggered 20mm
blocks (movable)
Reference Block: 11mm for Metric Height Master 611621-031
Reference Block: .6" for for Inch Height Master 611196-531
515-111:
515-120:
––––––:
959149:
959150:
050019:
050059:
Riser block
515-374
SPECIFICATIONS
Metric
Range (H)
Order No. Block step
Parallelism
10 < H ≤ 310mm
10 < H ≤ 460mm
10 < H ≤ 610mm
515-374
515-376
515-378
2µm
2.5µm
2.5µm
Resolution Block Pitch
Accuracy
Micrometer Head
Accuracy
±2µm
±2µm
±2.5µm
Mass (kg)
9.5
13.6
16.0
Inch/Metric
Range (H)
.5” < H ≤ 12”
515-375
1” (staggered)
.5” < H ≤ 18”
515-377
1” (staggered)
.5” < H ≤ 24”
515-379
1” (staggered)
Resolution Block Pitch
Accuracy
.0001” / ±.0001”
0.001mm
.0001” / ±.0001”
0.001mm
.0001” / ±.0001”
0.001mm
E-26
Parallelism Micrometer Head Mass (kg)
Accuracy
.00005”
±.0001”
9.5
.0001”
±.0001”
13.6
.0001”
±.0001”
16.0
Auxiliary block kit for bore gage (inch)
Riser block (see page E-27.)
SPC cable (40” / 1m)
SPC cable (80” / 2m)
Fitted Mahogany case for 12” / 300mm model
Fitted Mohogany case for 18” / 450mm model
24" / 600mm model
Riser Blocks
SERIES 515
FEATURES
•These riser blocks are specially designed for
standard/Digimatic height masters.
515-113
515-114
515-115
SPECIFICATIONS
Metric
Height
150mm
300mm
600mm
Inch
Order No.
515-113
515-114
515-115
Accuracy of height
±0.6µm
±1.0µm
±2.0µm
Mass (kg)
5.7
11.3
31
Height
6”
12”
24”
Order No.
515-116
515-117
515-118
Accuracy of height
±20µin
±40µin
±80µin
Mass (kg)
5.7
11.3
31
Auxiliary Block Kit
SERIES 515 — for Bore Gage
FEATURES
•Used for efficient zero-setting of dial bore
gages and tubular inside micrometers (18
- 150mm) on a Height Master.
Bore gage zero-setting
515-112
SPECIFICATIONS
Metric
Order No.
515-110
515-111
515-112
Inch
Applicable height master
Digimatic Height Master
Height Master
Order No.
515-119
515-120
515-121
E-27
Applicable height master
Universal Height Master, Height Master (515-310)
Digimatic Height Master
Height Master (515-311)
SERIES 515 — Usable in Vertical and Horizontal Orientations
FEATURES
•The Universal Height Master is designed for
both vertical and horizontal orientations,
providing a wide range of applications
such as accuracy checking of machine tool
table movements.
•Fitted wooden case supplied.
Technical Data
Graduation:
Counter Resolution:
Character Height:
Block arrangement:
0.001mm or .00001"
.001” or 0.01mm
.16” / 4mm
Straight arrangement
Micrometer Head
Travel stroke:
1" or 20mm
Pitch:
.025"/rev or 0.5mm/rev
Hysteresis:
.00004” / 1.2µm up to 24.2” / 610mm
.00006” / 1.5µm for 40.2” / 1010mm
Block pitch accuracy: ±1.5µm (0 < R ≤ 310mm)
±2.5µm (310 < R ≤ 610mm)
±3.5µm (610 < R ≤ 1010mm)
Parallelism of blocks: 1.0µm (0 < R ≤ 310mm)
2.5µm (310 < R ≤ 1010mm)
Single-row 10mm
blocks (movable)
900574*:
515-112:
515-119:
Supporting base for vertical operation
Mass: 3kg
(*supplied as a standard for 515-523 and 515-513)
Auxiliary block kit for bore gage (inch)
Horizontal orientation
Using in horizontal orientation
Riser block
515-520
SPECIFICATIONS
Metric
Range (R)
Order No.
5 < R ≤ 610mm
5 < R ≤ 1010mm
515-520
515-523
Block step
Accuracy
10mm (straight) 0.001mm ±1.5µm
10mm (straight) 0.001mm ±3.5µm
Parallelism
of Block
1.0µm
2.5µm
Micrometer
Mass (kg)
Head Accuracy
±1.2µm
42
±1.5µm
63.5
Parallelism
of Block
.00006”
.00006”
.00008”
Micrometer
Head Accuracy
±.00004”
±.00004”
±.00006”
Inch
Range (R)
.2” < R ≤ 18.2”
.2” < R ≤ 24.2”
.2” < R ≤ 40.2”
515-512
515-510
515-513
.5” (straight)
.5” (straight)
.5” (straight)
Accuracy
.00001”
±.00005”
.00001”
±.0001”
.00001”
±.00015”
Mass (kg)
42
50
63.5
Supporting base
E-28
High Accuracy Check Master HMC-H
SERIES 515
FEATURES
Technical Data
Measuring range (R): Refer to the list of specifications.
Block pitch accuracy: ±1.2µm (0 < R ≤ 310mm)
±1.8µm (310 < R ≤ 610mm)
±2.5µm (610 < R ≤ 1010mm)
±4.0µm (1010 < R ≤ 1510mm)
Parallelism of blocks: 1.0µm (0 < R ≤ 450mm)
1.5µm (450 < R ≤ 1010mm
2.0µm (1010 < R ≤ 1510mm)
•Designed to check the accuracy of table
movements of machine tools and calibrate
CMMs. Permanently wrung stack of gage
blocks is housed in a rigid frame.
•Can be used in either vertical and horizontal
orientation.
•Fitted wooden case supplied.
Single-row
Vertical
10mm (.5") blocks orientation
Specifications for Ceramic Check Master:
•Each measuring block is made of zirconiabased ceramic that requires no anti-corrosion
treatment for measuring faces.
•Free from deterioration and dimensional
changes over time.
Horizontal
orientation
515-743
515-742
515-740
SPECIFICATIONS
Metric
Range (R) Order No.
300mm
450mm
600mm
1000mm
1500mm
Pitch
Steel
Ceramic P
P
515-740
515-741
515-742
515-743
515-744
515-760
515-761
515-762
515-763
515-764
10mm
10mm
10mm
10mm
10mm
20mm
20mm
20mm
20mm
20mm
Accuracy of block pitch for the range
shown below as measured from the
bottom block
up to
3006001000300mm 600mm 1000mm 1500mm
±1.2µm —
—
—
±1.2µm ±1.8µm —
—
±1.2µm ±1.8µm —
—
±1.2µm ±1.8µm ±2.5µm —
±1.2µm ±1.8µm ±2.5µm ±4.0µm
Length
Parallelism Mass
(kg)
331mm
482mm
631mm
1037mm
1546mm
1µm
1µm
1.5µm
1.5µm
2µm
Accuracy of block pitch for the range
shown below as measured from the
bottom block
up to
12244012”
24”
40”
60”
±50µin —
—
—
±50µin ±70µin —
—
±50µin ±70µin —
—
±50µin ±70µin ±100µin —
±50µin ±70µin ±100µin ±158µin
Length
Parallelism Mass
(kg)
13.0”
19.0”
25.0”
41.0”
61.5”
40µin
40µin
60µin
60µin
80µin
3.6
5.4
7.2
12.0
18.0
Inch
Range (R) Order No.
Pitch
Supporting base for vertical operation
(*supplied as a standard for 515-523 and 515-513)
Dimensions: 14.2"(W) x 8.7"(D) x 8.3"(H)
360mm(W) x 220mm(D) x 210mm(H)
Mass:3kg
12”
18”
24”
40”
60”
Steel
Ceramic P
P
515-730
515-731
515-732
515-733
515-734
515-750
515-751
515-752
515-753
515-754
.5”
.5”
.5”
.5”
.5”
1”
1”
1”
1”
1”
3.4
5.2
6.9
11.5
17.3
Size Plate
Indicates instrumental
errors at intervals of
1"/20mm +0.5
+0.2
3
4
5
(Example)
Side
Supporting base
3.2"
P
(80mm)
601167:
P
Base
1.9"
(50m
m)
A
Zero point
Note:
300mm, 12" models
do not have hand
hold openings.
E-29
P
P
CERA Straight Master SM-C
SERIES 311 — Straightness Measuring Instrument
FEATURES
CERA Straight master is a master gage used
for the straightness inspection of each axis
movement such as a CMM, machine tool,
semiconductor related equipment and form
measuring machine.
•Made from Alumina ceramic
•50mm/2” pitch gradation scales
•Precision lapped measuring surface
•Double faced type is lapping the double
face which can be used for straightness
in horizontal and vertical as a reference
square.
•Lightweight
• Supplied with fitted wooden case.
SPECIFICATIONS
Inch
Order No.*
311-302-33
311-305-33
311-307-33
311-309-33
Nominal length
16”
28”
40”
52”
High accuracy model
Order No.*
Straightness
311-322-33
0.3µm
311-325-33
0.5µm
311-327-33
1.0µm
311-329-33
1.5µm
Size (L x H x W)
440 x 35 x 50mm
740 x 35 x 50mm
1040 x 45 x 80mm
1340 x 45 x 80mm
Mass
1.8kg
3kg
8kg
10kg
Cross section
Inch
Metric
Nominal length
400mm
700mm
1000mm
1300mm
Order No.*
311-332-33
311-335-33
311-337-33
311-339-33
Ultra high accuracy model
Nominal length Order No.*
Straightness
16”
311-342-33
0.2µm
28”
311-345-33
0.4µm
40”
311-347-33
0.5µm
52”
311-349-33
0.7µm
Technical Data
Lapped surface
Size (L x H x W)
440 x 35 x 50mm
740 x 35 x 50mm
1040 x 45 x 80mm
1340 x 45 x 80mm
Mass
1.8kg
3kg
8kg
10kg
H
Metric
Nominal length
400mm
700mm
1000mm
1300mm
W
Double faced type
Double faced type
Lapped surface
22.5
22.5
Metric
Nominal length
400mm
700mm
1000mm
1300mm
H
SPECIFICATIONS
Inch
Order No.*
311-352-33
311-355-33
311-357-33
311-359-33
Nominal length
16”
28”
40”
52”
Double faced model
Order No.*
Straightness
311-362-33
0.3µm
311-365-33
0.5µm
311-367-33
1.0µm
311-369-33
1.5µm
E-30
Size (L x H x W)
440 x 45 x 80mm
740 x 45 x 80mm
1040 x 45 x 80mm
1340 x 45 x 80mm
Mass
3.2kg
5.5kg
8kg
10kg
Graduation
W
Square Master
SERIES 311 — Squareness / Straightness Measuring Instrument
Technical Data
Squareness:
Refer to the list of specifications
Straightness:
Refer to the list of specifications
Dial test indicator provided
Range:
0.2mm
Graduation:
0.002mm
Accuracy:
3µm
FEATURES
•Squareness (perpendicularity) and
straightness measurements can be
performed accurately and efficiently by
moving a lever.
• With a dial test indicator for reading
displacements.
• Its own squareness is adjustable for high
accuracy measurement.
Optional Accessory
––––––:
Riser blocks (see page E-27.)*
517-665: Granite square, 45 (W) x 140 (D) x 280 (H) mm
900571: Adjustable holder
900551: Extension holder
900565:Feeler**
*Not available for 450mm model.
**Adapter (902803) is required for metric model.
Adjustable holder
No.900571
65
7.5
Unit: mm
122
311-215
311-225
SPECIFICATIONS
ø6
Metric
Vertical travel
150mm
250mm
450mm
50
Extension holder
No.900551
Order No.
311-215
311-225
311-245
Squareness
3µm
6µm
9µm
Straightness
2µm
2.5µm
3.5µm
Mass (kg)
13.7
16.2
24
Unit: mm
ø6
200
Indicator holder
125
Feeler
No.900565
Connector pin
Unit: mm
2
88
Connector pin
16
72
54
125
Feeler
54
83
67
Test
indicator
Indicator holder
E-31
311-245
Standard Scales
SERIES 182 — Made of Low Expansion Glass
FEATURES
•High precision glass scales manufactured
under Mitutoyo’s leading-edge Linear Scale
production technology.
•High accuracy is guaranteed to be used as
a standard for calibrating graduated scales.
182-502-50
Technical Data
Accuracy (at 20°C): (0.5+L/1000)µm,
L = Measured length (mm)
Glass material:
Low expansion glass
Thermal expansion coefficient: 8x10-8/K
Graduation:1mm
Graduation thickness: 4µm
Mass:
0.75kg (250mm), 1.8kg (500mm)
182-501-50
DIMENSIONS
SPECIFICATIONS
Metric
Unit: mm
Graduation
Range
250mm
250mm
500mm
500mm
1
T
2
4
W
L
Range
5
Graduation thickness: 4µm
Alignment mark thickness: 20µm
Order No.
182-501-50
182-501-60*
182-502-50
182-502-60*
L
280mm
280mm
530mm
530mm
W
20mm
20mm
30mm
30mm
T
10mm
10mm
20mm
20mm
*with English JCSS certificate.
Working Standard Scales
SERIES 182
FEATURES
182-525-10
•High precision glass scales
manufactured under Mitutoyo’s
leading-edge Linear Scale
production technology.
•Ideal for checking magnification
accuracy of profile projectors
and microscopes, and the table
feeding accuracy of measuring
equipment.
182-523-10
182-522-10
Technical Data
Accuracy (at 20°C): (1.5+2L/1000)µm,
L = Measured length (mm)
Glass material:
Sodium glass
Thermal expansion coefficient: 8.5x10-8/K
Graduation:
0.1mm (thickness: 20µm)
0.5mm (thickness: 50µm)
1mm (thickness: 100µm)
182-513-10
DIMENSIONS
L
Renge
10
1
0.1 graduation
Unit: mm
SPECIFICATIONS
2.5
3.5
5
Graduation
2.7
1.71.5
22
0.1mm graduation
10
Graduation
4.7
1
0.5
Graduation
4.7
1
2.5
3.5
5
L
Renge
2 2
36
0.5mm graduation
10
3.5
5
L
Renge
2 2
36
1mm graduation
E-32
Metric
Range
50mm
100mm
150mm
200mm
100mm
200mm
300mm
400mm
500mm
250mm
500mm
750mm
1000mm
Order No.
182-511-10
182-512-10
182-513-10
182-514-10
182-521-10
182-522-10
182-523-10
182-524-10
182-525-10
182-531-10
182-532-10
182-533-10
182-534-10
Graduation
0.1mm
0.1mm
0.1mm
0.1mm
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
1mm
1mm
1mm
1mm
L
75mm
125mm
175mm
225mm
130mm
230mm
330mm
430mm
530mm
280mm
530mm
780mm
1030mm
Mass
0.23kg
0.24kg
0.35kg
0.36kg
0.27kg
0.32kg
0.57kg
0.71kg
0.86kg
0.55kg
0.86kg
1.22kg
1.54kg
High Precision Square
SERIES 311
FEATURES
The High Precision Square is a gage used for
inspecting the travel straightness and axial
perpendicularity of moving elements on
equipment such as machine tools, CMMs,
form measuring machines and semiconductor
related equipment.
•Four precision-lapped reference surfaces.
•Better than 1μm/300mm straightness and
perpendicularity.
311-111
311-113
311-112
SPECIFICATIONS
Metric
Order No.
311-111
311-112
311-113
Dimension (W x L x T)
90 x 110 x 25mm
160 x 210 x 25mm
260 x 310 x 30mm
Mass
1.5kg
5.0kg
14.0kg
*311-113 is supplied with a removable handle.
Spring Dividers and Calipers
SERIES 950
FEATURES
•Spring Divider — Fully hardened and
tempered joints, spring, washers and
divider points.
Spring divider
Outside spring calipers
•Outside Spring Caliper — Contact ends
fully rounded to give accurate dimensions.
•Inside Spring Caliper — Ends fully rounded
to give accurate contact with a workpiece.
Inside spring calipers
SPECIFICATIONS
Range
6" (150mm)
8" (200mm)
Order No.
Spring divider
950-212
950-213
Outside spring
calipers
950-222
950-223
Inside spring
calipers
950-232
950-233
E-33
Combination Square Set
SERIES 180
FEATURES
•The measuring head come hardened or cast
iron-not-hardened
•Economy sets not including a protractor
head are also available
•Measuring head are attached to the
graduated steel rule (blade), allowing
versatile measurements on various types of
workpieces
3 part set
Technical Data
Square head:
Used to set the rule at 90 degrees or 45
degrees to an edge of a workpiece.
Center head: Used to locate centers of round
workpieces
Protractor head: Used to set the rule at a desired angle
to an edge of a workpiece. Also used
for measuring angles.
SPECIFICATIONS
Head Only
Head Only
Hardened
Order No.
180-112B
180-212B
180-301B
Order No. Description
180-102B Square Head for 12"/300mm to 24"/600mm
180-202B Center Head for 12"/300mm to 24"/600mm
Inch/Metric
Set No.
180-903B
180-905B
180-906B
180-907B
180-910B
Blade
Size
12"
12"
12"
12"/300mm
300mm
Cast iron-not hardened
Description
Square Head for 12"/300mm to 24"/600mm
Center Head for 12"/300mm to 24"/600mm
Protractor Head for 12"/300mm to 24"/600mm
Hardened Combination Square Sets
Type
4R
4R
16R
E/M
Metric
Square Head Center Head Protractor
Head
180-501B
180-501B
180-502B
180-503B
180-505B
180-102B
180-102B
180-102B
180-102B
180-102B
180-202B
180-202B
180-202B
180-202B
180-202B
180-301B*
180-301B*
180-301B*
180-301B*
*Cast iron-not hardened
Inch/Metric
Set No.
180-803B
180-805B
Blade
Size
12"
12"
Inch / Metric
Order No.
180-501B
180-502B
180-503B
180-505B
180-701B
180-703B
180-601B
180-603B
Cast iron-not hardened Combination Square Sets
Type
4R
4R
Square Head Center Head Protractor
Head
180-501B
180-501B
180-112B
180-112B
180-212B
180-212B
180-301B
Blades only
Length
12”
12”
12” x 300mm
300mm
18”
18” x 450mm
24”
24” x 600mm
Graduations
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 0.5mm
1, .5, 1, 0.5mm
8, 16, 32, 64ths (4R)
32, 64ths, 1, 0.5mm
8, 16, 32, 64ths (4R)
32, 64ths, 1, 0.5mm
Accuracy (length)
+.005” / -.0035”
(+0.13mm / -0.09mm)
+.006” / -.0035”
(+0.15mm / -0.09mm)
+.007” / -.0035”
(+0.18mm / -0.09mm)
E-34
Steel Rules
SERIES 182
FEATURES
• Clear graduations on satin-chrome finish.
• Stainless tempered.
182-125
SPECIFICATIONS
Wide Rigid Rules (thickness 3/64")
Order No. Size
182-101
182-102
182-103
182-104
182-105
182-106
182-107
182-108
182-111
182-121
182-122
182-123
182-124
182-125
182-126
182-131
182-241
182-142
182-143
182-144
182-145
182-151
182-161
182-162
182-163
182-165
182-171
6”(4R)
6”(16R)
6”(5R)
6”(3R)
6” x 150mm
6” x 150mm
6” x 150mm
6” x 150mm
150mm
12”(4R)
12”(16R)
12”(5R)
12”(3R)
12” x 300mm
12” x 300mm
300mm
18”(4R)
18”(16R)
18”(5R)
18”(3R)
18” x 450mm
450mm
24”(4R)
24”(16R)
24”(5R)
24” x 600mm
600mm
Graduations
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1mm
1/16
1/64
1/64
1/64
1/64
1/100
1/100
1/50
0.5mm
1/16
1/64
1/64
1/64
1/64
1/100
0.5mm
1/16
1/64
1/64
1/64
1/64
0.5mm
1/16
1/64
1/64
1/64
0.5mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1/32
1/50
1/10
1mm
1mm
Width
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
1/64
1/100th
1/100th
0.5mm
0.5mm
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
19mm
1”
1”
1”
1”
1”
1”
25mm
13/16”
13/16”
13/16”
13/16”
13/16”
30mm
13/16”
13/16”
13/16”
13/16”
30mm
E-35
Accuracy
(Length)
+.004” / –.0035”
(+0.1mm / –0.09mm)
+.005 / –.0035”
(+0.13mm / –0.09mm)
+.006" / -.035"
(+0.15mm / -0.09mm)
+.007” / –.0035”
(+0.18mm / –0.09mm)
Steel Rules
SERIES 182
FEATURES
• Clear graduations on satin-chrome finish.
• Stainless tempered.
182-265
SPECIFICATIONS
182-223
Full-Flexible Rules (thickness 1/64")
Order No.
182-201
182-202
182-203
182-204
182-205
182-206
182-207
182-208
182-211
182-221
182-222
182-223
182-224
182-225
182-226
182-231
182-141
182-242
182-243
182-244
182-245
182-251
182-261
182-262
182-263
182-264
182-265
182-271
Size
6”(4R)
6”(16R)
6”(5R)
6”(3R)
6” x 150mm
6” x 150mm
6” x 150mm
6” x 150mm
150mm
12”(4R)
12”(16R)
12”(5R)
12”(3R)
12” x 300mm
12” x 300mm
300mm
18”(4R)
18”(16R)
18”(5R)
18”(3R)
18” x 450mm
450mm
24”(4R)
24”(16R)
24”(5R)
24”(3R)
24” x 600mm
600mm
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1/32
1mm
Graduations
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100 1mm
1/100 1mm
1/50
1mm
0.5mm 1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
1/100 1mm
0.5mm 1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm 1mm
1/16
1/32
1/64
1/50
1/64
1/10
1/64
1/10
1/64
1mm
0.5mm 1mm
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
0.5mm
0.5mm
1/64th
1/100th
1/100th
1/50th
0.5mm
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
1/64
1/100th
1/100th
1/50th
0.5mm
0.5mm
Width
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
12mm
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
12mm
3/4”
3/4”
3/4”
3/4”
3/4”
18mm
3/4”
3/4”
3/4”
3/4”
3/4”
18mm
Accuracy (Length)
+.004” / –.0035”
(+0.1mm / –0.09mm)
+.005” / –.0035”
(+0.13mm / –0.09mm)
+.006” / -.0035”
(+0.15mm / -0.09mm)
+.007” / –.0035”
(+0.18mm / –0.09mm)
Semi-Flexible Rules
SERIES 182
FEATURES
• Engraved on frontside only
SPECIFICATIONS
182-304
Inch/Metric
Order No.
182-301
182-302
182-303
182-304
182-305
182-307
182-309
Size
4” x 100mm
6” x 150mm
8” x 200mm
10” x 250mm
12” x 300mm
20” x 500mm
40” x 1000mm
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1mm
1mm
1mm
1mm
1mm
1mm
1mm
Graduations
1/32 1/64
1/32 1/64
1/32 1/64
1/32 1/64
1/32 1/64
1/32 1/64
1/32 1/64
1/16th
1/16th
1/16th
1/16th
1/16th
1/16th
1/16th
E-36
Width
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
5/8”
Accuracy (Length)
+.004” / –.0035”
(+0.1mm / –0.09mm)
+.005” / –.0035”
+0.13mm / –0.09mm)
+.007” / –.0035” (+0.18mm / –0.09mm)
+.008”/–.004” (+0.2mm / –0.1mm)
Thickness Gages
SERIES 950, 184
FEATURES
•Each leaf is marked with its thickness.
•Each leaf is detachable if necessary.
Technical Data
Accuracy of Leaves Thickness
Nominal Thickness
Metric
0.01mm to less than 0.06mm:
Inch
.0015 to less than .007":
.200" and over :
Tolerance
±0.003mm
±0.004mm
±0.005mm
±0.008mm
±0.01mm
±.0002"
±.0003"
±.0004"
±.00045"
±.0005"
±.00055"
±.0006"
±.00065"
±.00075"
184-303S
SPECIFICATIONS
Inch
Order No.
950-251
Range
.002” - .035”
(26 leaves)
.0015” - .025”
(26 leaves)
.0015” - .200”
(15 leaves)
.0015” - .200”
(13 leaves)
.0015” - .015”
(8 leaves)
950-252
950-254
950-255
950-256
Type of Blade
Straight
1/2” width
Tapered
1/4” width at tip
Straight
1/2” width
Straight
1/2” width
Straight
1/2” width
Blade Length Composition of leaves
3”
.002 thru .018” by .001” step plus .022,
.024, .025, .028, .030, .032, .035”
3”
.002 thru .025” by .001” step plus .0015, .0025”
3”
.0015, .002, .003, .004, .006, .008, .010, .012,
.015, .020, .030, .040, .075, .100, .200”
.0015, .002, .003, .004, .006, .008, .010,
.020, .030, .040, .075, .100, .200”
.0015, .002, .003, .004, .008, .010, .012, .015”
4 .5”
6”
Metric
Order No.
184-313S
184-303S
0.05 - 1mm 184-304S
0.05 - 1mm 184-305S
184-301S
0.05 - 0.8mm 184-306S
184-308S
0.03 - 0.5mm 184-307S
Range
0.05 - 1mm
Wooden Box Part No.
Part No.
073112
063413
Spare
960-703
960-611
960-611
960-613
Type of Blade
Straight
13mm width
Blade Length
100mm
150mm
Straight 13mm width 150mm
Straight
100mm
13mm width
150mm
Straight
100mm
13mm width
150mm
Straight
100mm
13mm width
184-302S
150mm
Precision Levels
SERIES 960
Composition of leaves
28 leaves: 0.05 - 0.15mm by 0.01mm, 0.2 - 1mm by 0.05mm
20 leaves: 0.05 - 1mm by 0.05mm
10 leaves: 0.05 - 0.2mm by 0.05mm, 0.3 - 0.8mm by 0.1mm
10 leaves: 0.05 - 0.2mm by 0.05mm, 0.3 - 0.8mm by 0.1mm
13 leaves: 0.03 - 0.1mm by 0.01mm, 0.2 - 0.5mm by 0.1mm,
0.15mm
13 leaves: 0.03 - 0.1mm by 0.01mm, 0.2 - 0.5mm by 0.1mm,
0.15mm
SPECIFICATIONS
Metric
Order No. Sensitivity
960-703
FEATURES
•High precision longitudinal and transverse
vials make it possible to check or level
surfaces.
•Supplied in wooden box.
Dimensions
(W x D x H)
0.02mm/m ±0.006mm 200 x 44 x 200mm
Inch
Order No. Sensitivity
960-611
960-612
960-613
Dimensions
W
D
H
.0012”/12” ±.0006” 7.87” 1.73” 1.50”
.0006”/12” ±.0003” 7.87” 1.73” 1.50”
.00024”/12” ±.00017” 7.87” 1.73” 1.50”
960-703
960-611
E-37
Accuracy
Accuracy
Digital Universal Protractor
SERIES 187
FEATURES
Technical Data
•Data output function make it easy to see
the statistical data.
•Can be attached to height gages.
gage holder (950750, metric)
•Setting preset value.
•Removable blade.
Function
Range:
-360° to +360°
Tolerance:
±2’ (±0.03°)
Repeatability:1’
Resolution:
1’ (0.01°)
Battery:
Lithium Battery
Battery life:
2,000 hours
Presetting
187-552
12" Blade (Code No. 187-103)
Battery (CR2032) (Part No. 05SAA217)
Clamp box for Inch Height Gage (Part No. 950749)
Plastic Case
SPECIFICATIONS
Code No.
Model
Blade
Display
Measuring range
Resolution
Accuracy
Repeatability
Mass
Dust / Water protection level
Function
Max. response speed
Battery
Battery life
Alarm
Temperature
187-552
BP-D300E
12” (187-103)
LCD - 5 digit, (-) sign, character height 6.5mm
-360˚ ~ +360˚
1’ (0.01˚)
± 2’ (±0.03˚)
1’ (0.01˚)
1.45 lbs (659g)
IP40
Zero, Direction select, Data output / Data hold,
Preset, Switchable Seagesimal or Decimal Natation
3 rps
Lithium battery (CR2032) 1 pc. (Part No. 05SAA217)
2,000 hours
Battery voltage low, Over speed error (Err)
Operation temperature: 0 to 40˚C
Storage temperature: -10 to 60˚C
187-104
187-105
950750
905338
905409
6" blade
Acute angle attachment
Clamp box for Metric Height Gage
Connecting cable (40" / 1m)
Connecting cable (80" / 2m)
DIMENSIONS
187-552
attached to height gage
E-38
Technical Data
Graduation:
Accuracy
Vernier Straightness
Parallelism
L = Length in inch
Diameter:
5min. (0˚ - 90˚ - 0˚)
±5’
[.00016"+(.00005xL/2)]"
[.00016"+(.00005xL/2)]"
2.56" / 70mm
SERIES 187
FEATURES
•High-precision angle gage for accurate
angle measurement of machines, molds,
and jigs.
•Can be attached to height gages.
187-904
SPECIFICATIONS
Universal Bevel Protractors
Order No. Dial
187-904
1°
Vernier
5 min
187-906
5min
1°
  Graduation
Remarks
with 6” blade (187-104) and
Clamp box for Inch Height Gages (950749)
with 12” blade (187-103) and
Clamp box for Inch Height Gages (950749)
Accessories and Parts
Order No.
187-103
187-104
187-105
950749
950750
Remarks
12” Blade.
6” Blade.
Acute angle attachment
Clamp box for Inch Height Gages
Clamp box for Metric Height Gages
Dimensions
Bevel Protractor
SERIES 187
Technical Data
Graduation:
5 min. (0° - 90° - 0°)
Blade edge angle: 30° and 60°
Diameter:
2.56” / 70mm
FEATURES
•Consists of three sheets of stainless steel,
the middle one of which is made for angle
measurements.
187-201
SPECIFICATIONS
Order No.
187-201
Graduation
1˚ / 5 min
Remarks
Center black knob locks
the blade position
Protractor Graduation:
0°–90°, 90°–0°
E-39
Radius Gages
SERIES 186
FEATURES
•Radius size is stamped on each gage.
•Both concave and convex radius gages
become a pair.
•With a locking clamp.
Technical Data
Accuracy:
±.002”
186-105
SPECIFICATIONS
Metric
Range
0.4 - 6mm
0.5 - 13mm
1 - 7mm
7.5 - 15mm
15.5 - 25mm
Order No.
186-110
186-902
186-105
186-106
186-107
18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6mm, 1.75 - 3mm by 0.25mm, 3.5 - 6mm by 0.5mm
26 leaves: 0.5 - 13mm by 0.5mm
34 pairs: 1 - 3mm by 0.25mm 3.5 - 7mm by 0.5mm
32 pairs: 7.5 - 15mm by 0.5mm
15 pairs: 15.5 - 20mm by 0.5mm, 21 - 25mm by 1mm
Remarks
90° arc
90° arc
180° arc
180° arc
180° arc
186-110
Inch
Range
1/32" - 17/64"
1/32" - 1/4"
17/64" - 1/2"
9/32" - 33/64"
Order No.
186-103
186-101
186-102
186-104
16 leaves: 1/32" - 17/64" by 64ths
15 pairs: 1/32" - 1/4" by 64ths
16 pairs: 17/64" - 1/2" by 64ths
16 leaves: 9/32" - 33/64" by 64ths
Remarks
90° arc
180° arc
180° arc
90° arc
Pitch Gages
Technical Data
SERIES 188, 950
FEATURES
•Thread pitch size is stamped on each gage.
•Metric, Unified, and Whitworth screw pitch
gages.
188-101
SPECIFICATIONS
Metric Screw Pitch Gages (60˚)
Range
Order No. Composition of leaves
0.25 - 2.5mm 188-153
28 leaves: 0.25, 0.30. 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90,
1.00, 1.10, 1.20, 1.25, 1.30, 1.40, 1.50, 1.60, 1.70, 1.75, 1.80, 1.90, 2.00. 2.50 mm
0.35 - 6mm 188-130
22 leaves: 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
6mm and 60° angle gage
0.4 - 7mm
188-122
21 leaves: 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
0.4 - 7mm
188-121
18 leaves: 0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm
Unified Screw Pitch Gages (60˚)
Range
4 - 42 TPI 188-111 30 leaves: 4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34,
36, 38, 40, 42 TPI
4 - 84 TPI 950-253 51 leaves: 4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36,
38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84 TPI
Note: Metric and Unified Pitch Gage Set (188-151) is available. It consists of 188-122 (Metric) and 188-111 (Unified).
Metric and Unified Screw Pitch Gage Set (60˚)
Range
0.4 - 7mm / 4 - 42 TPI
0.5 - 6mm / 4 - 56 TPI
188-151 51 leaves: Set of 188-122 and 188-111
188-152 28 leaves: 4, 6, 8, 10, 11, 11-1/2, 12, 13, 16, 20, 28, 32, 40, 56 TPI
0.50, 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00, 3.50, 4.00, 4.50, 5.00. 6.00 mm
Whitworth Screw Pitch Gages (55˚)
Range
4 - 42 TPI
4 - 60 TPI
188-101
30 leaves: 4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32,
34, 36, 38, 40, 42 TPI
188-102
28 leaves: 4, 41/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40,
48, 60 TPI
E-40
TPI
Metric
4-6
7-12
13-25
26-48
60
6.35-4.23
3.63-2.12
1.95-1.02
0.98-0.53
0.42
Accuracy
Pitch Angular
(mm) ( minutes)
±0.05
±35
±0.05
±40
±0.05
±45
±0.05
±50
±0.05
±60
Radius Gages-Sets
SERIES 186
FEATURES
Decimal Radius Gages to 1”
Fractional Radius Gages to 1”
MITUTOYO Radius Gages are recommended
for checking or laying out concave or
convex radii. An individual gage for each
dimension makes it possible to verify radius
or fillet dimensions easier, faster and more
accurately in machining, layout, inspection
and pattern-making work. The measuring
surfaces are precisely finished with smooth,
accurate edges. The Radius Gages are
available separately or in six handy sets.
Each Radius Gage has five measuring
locations, and it is identified with its
particular radius dimensions. The gages have
a satin or dull-chrome finish.
Accuracy: ±.0016" / 0.04mm
3
186-901
SPECIFICATIONS
1
2
The Holding Cases, provided to protect the
sets of Radius Gages, have indexed pockets
to facilitate the selection of the proper size
gage. A 4” long holder is furnished with Set
No. 186-901 to make it possible to check
radii in confined or hard-to-reach locations.
5
4
5 concave and convex radii per each leaf.
Order No.
186-901
No. of Leaves
25
186-903
186-904
186-905
186-906
17
8
8
26
186-907
10
Sizes
1/64”–17/64” by 64ths
and 9/32”–1/2” by 32nds
1/64”–17/64” by 64ths
9/32”–1/2” by 32nds
9/16”–1” by 16ths
.010–.030” by .005”
.040–.100” by .010”
.120–.300” by .020”
.350–.500” by .050”
.550–1” by .050”
Decimal
Radius
.010”
.015”
.020”
.025”
.030”
.040”
.050”
.060”
.070”
.080”
.090”
.100”
.120”
.140”
.160”
.180”
.200”
.220”
Remarks
Holder
Holder
Holder
Fraction
Part No.
211798
211799
211800
211801
211802
211803
211804
211805
211806
211807
211808
211809
211810
211811
211812
211813
211814
211815
Radius
.240”
.260”
.280”
.300”
.350”
.400”
.450”
.500”
.550”
.600”
.650”
.700”
.750”
.800”
.850”
.900”
.950”
1.000”
Part No.
211816
211817
211818
211819
211820
211821
211822
211823
211824
211825
211826
211827
211828
211829
211830
211831
211832
211833
Radius
1/64”
1/32”
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
E-41
Part No.
201441
201442
201443
201444
201445
201446
201447
201448
201449
201450
201451
201452
201453
201454
201455
201456
201457
201458
Radius
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
Part No.
201459
201460
201461
201462
201463
201464
201465
211790
211791
211792
211793
211794
211795
211796
211797
Digital Protractor
SERIES 950
FEATURES
These Digital Protractors present inclination
values on an easy-to-read liquid crystal
display. The measurements are generated by
an electronic gravity sensor and processed
by the latest low-power electronic circuit
technology.
• Full 360° range (90° x 4).
• Machined aluminum frame.
• Alternate reference (zero).
• Reading hold.
• Simple calibration requiring no special
fixtures.
• Display remains upright to view at all
angles. (950-317, Pro 360 Model).
• RS232C output. (950-318 Pro 3600 Model).
• Supplied in fitted carrying case.
Front View
950-317 Back View
950-318 Back View
SPECIFICATIONS
Order No.
Model
Range
Resolution
950-317
Pro 360
360° (90°x4)
0.1°
Accuracy
±0.1°Level ±10°, Plumb ±10°
±0.2° Maximum error
Repeatability
Cross Axis Error
Battery Life
Temperature
Operation
Storage
Weight
Output
±0.1°
Minimal
500 Hrs. Standard 9-Volt Battery
-5°C to 50°C (23° to 122°F)
-20°C to 65°C (-4°F to 149°F)
950-318
Pro 3600
360° (90°x4)
0.01° (0° to 9.99°)
0.1° (10° to 90°)
±0.05° (0° to 10°)
±0.1° (80° to 90°)
±0.2° (10° to 80°)
±0.05°
Minimal
500 Hrs. Standard 9-Volt Battery
-5°C to 50°C (23° to 122°F)
-20°C to 65°C (-4°F to 149°F)
289g (10.2oz.)
N/A
Plastic Case
295g (10.4oz.)
RS-232C Compatible
Plastic Case
±Represents clockwise or counter-clockwise slope.
50AAA983A RS-232C Output cable w/foot switch
DB9, FEMALE
TO PC OR INTERFACE UNIT
2m
2m
9P
FOOT SWITCH
TO DIGITAL PROTRACTOR
DIMENSIONS
50AAA983A RS-232C Output cable w/foot switch 10P-9P
Unit: mm
153
0.0°
ALT
ZERO
105
(Distance between two M3 x 0.5 tapped holes)
E-42
49
HOLD
HOLD
ALT
ZERO
ON/OFF
31
140°
Digital Hand Tachometers
SERIES 982
FEATURES
•New Digital Hand Tachometers are
compact and easy to handle.
•NIST Certification is supplied with each
Digital Hand Tachometer.
•Model PH-200LC (982-552) has laser
Diode Detection and a combination of
Contact and Non-Contact measurement.
•Supplied with plastic carrying case.
982-551
982-552
DIMENSIONS
982-551
SPECIFICATIONS
Order No.
Model No.
Revolution per minute
Rotation speed
982-551
PH-100A
1.0 – 25,000 rpm
—
Measuring accuracy
Revolution
Surface, Speed, Length
Detection
Outside dimensions
1.0 – 599.9rpm: ±1rpm, 600.0 – 25,000 rpm:
±0.006% and ±0.5 digit
±0.4% and 1 digit
Optical coupler, 20 pulses per revolution
4.83” L x 2.52” W x 1.24” H
(122.5mm x 64mm x 31.5mm)
170 g
Battery: AA 3 pcs.
Mass
Power
982-552
PH-200LC
—
Non-contact: 6.0 – 99,999 rpm;
Contact: 6.0 – 25,000 rpm
6.0 – 599.9 rpm: ±1rpm, 600.0 – 99,999 rpm
±0.006% and ±0.5 digit
±0.4% and ±1 digit
Laser diode
4.55” L x 2.52” W x 1.24” H
Overall length with contact adapter: 149mm
160 g
Battery: AA 3 pcs.
Optional Accessories For Digital Hand Tachometers
982-552
Order No.
010049
010050
010051
010052
Description
Cone Adapter, Standard
Cone Adapter, 5/8”
Cone Adapter, 3/4”
Cone Adapter, 1-1/4”
010053
010054
010055
010056
010057
010058
010059
Funnel Adapter, Standard
Funnel Adapter, 3/4”
Measuring Wheel FPM (6” cir), Standard
Measuring Wheel FPM (12” cir)
Measuring Wheel YPM (0.1 yard cir)
Measuring Wheel MPM (0.1 meter cir)
Reflective Tabs 1/2” square (35 pcs)
010060
Extension Shaft (3” length)
Dimension
D = 1/2”
D = 5/8”
D = 3/4”
D = 1-1/4”
d = 1/2”
D = 1/2”
D = 3/4”
D = 1.91”
D = 3.82”
D = 1.15”
D = 1.25”
E-43
Drawing
Bench Center
SERIES 967
DIMENSIONS
Order No.: 967-201M
Unit: mm
E
D
G
H
ø25 (25)
Optional Accessories:
56AAJ988 Special attachment for mounting 967-201-10 in vertical position.
B
Indicator rod
assembly
A
Order No.
967-203-10
967-201-10
967-204-10
967-202-10
A
310
500
700
900
B
40
45
80
100
C
50
75
100
125
D
70
80
140
160
E
178
370
500
600
F
41
36
65
50
G
60
60
110
104
H
134.5
194.5
194.5
230
SPECIFICATIONS
Order No.
967-203-10
967-201-10
967-204-10
967-202-10
Center-to-Center Workpiece Capacity
Diameter
5.9” / 150mm
3.8”
11.8” / 300mm 5.8”
17.7” / 450mm 7.8”
23.6” / 600mm 9.8”
Max.
Weight Hold
17.5 lbs. (8kg)
35 lbs. (16kg)
44 lbs. (20kg)
66 lbs. (30kg)
Parallelism
of Centers
.0002”
.0002”
.0002”
.00024”
Flatness
of Surface
.0004”
.0006”
.0007”
.0008”
Attachment
Diameter
Ø3/8”
Ø3/8”
Ø3/8”
Ø3/8”
Mass (kg)
7
13
60
70
Granite Surface Plate Accessories
SERIES 517
These accessories made from the same high quality black granite as Mitutoyo surface plates,
allow extra flexibility in work holding and positioning.
SPECIFICATIONS
Angle Blocks
Angle Blocks
with or without inserts
Grade
Laboratory*
Master**
4 Face
4 Face
Size
2 Face
no inserts w/ inserts 2 Face no inserts w/ inserts
4 x 4 x 4" 517-767 517-761 517-773 517-867 517-861 517-873
6 x 6 x 6" 517-768 517-762 517-774 517-868 517862 517-874
517-862
(without inserts)
*Laboratory overall accuracy: .000025” per 6”.
**Master overall accuracy: .000050” per 6”.
Parallels
Grade
Size
.75 x 1 x 6"
.75 x 1.5 x 9"
1 x 2 x 12"
Pair
Accuracy
.00003"
.00004"
.00006"
Laboratory
2 Face
4 Face
517-755 517-750
517-756 517-751
517-757 517-752
Master
Accuracy 2 Face
.00006" 517-855
.00008" 517-856
.0001" 517-857
V-Blocks
Matching Pair
V-1 type have matching accuracy on “V” from the bottom face only.
V-5 type have four face matching accuracy plus “V”.
Grade
Laboratory*
Master**
Size
V-1
V-5
V-1
V-5
2 x 2 x 2.5" 517-787 517-783 517-887 517-883
3 x 3 x 3"
517-788 517-784 517-888 517-884
6 x 6 x 6"
517-789 517-785 517-889 517-885
*Laboratory overall accuracy: .00005” per 6”.
**Master overall accuracy: .0001” per 6
E-44
Technical Data
Maximum workpiece dia.: 300mm
Maximum workpiece height: 150mm
Mass:13kg
Spindle Tip Material: Hardened Steel
F
•Used with a dial test indicator (optional),
the Bench Center provides precision
measurement of concentricity verification
on cylindrical workpieces.
•With an indicator clamp. (Holding stem
diameter: 9.53mm / .375”)
C
FEATURES
517-884 V-Blocks (matching pair)
4 Face
517-850
517-851
517-852
517-852
Parallels
(in pairs)
56AAJ987 Special attachment for mounting 967-203-10 in vertical position.
56AAK066 Indicator rod assembly 967-201-10
967-203-10
56AAK426 Indicator rod assembly 967-202-10
967-204-10
Black Granite Surface Plate
SERIES 517
FEATURES
Cast iron surface plate
Granite surface plate
stickiness; this ensures a high degree of
•Natural granite seasoned for thousands
flatness over a long service life and causes
of years is free from deterioration or
no damage to other parts or instruments.
dimensional change over time.
•Trouble-free
operation for use with
•Granite surface plate has many advantages
magnetic
materials.
over cast iron surface plates:
•Long life and rust-free, resulting in low
Twice as hard as cast iron.
maintenance costs.
Minimal changes in dimension due to
•MITUTOYO
Granite Surface Plates meet
temperature changes.
or
exceed
Federal
Specification GGG-P Free from wringing, so there is no
463c.
Each
Surface
Plate is shipped with a
interruption of work.
Certificate
of
Accuracy
which guarantees
Free from burrs or protrusions because of
its
accuracy
and
verifies
its traceability to
the fine grain structure and insignificant
the National Institute of Standards and
Technology.
• All plates from 48”x108” and larger are
Machine Base Gray Granite. Smaller plates
are Black Granite.
• Surface Plates, to size of specifications
other than standard, available on special
order.
• Surface Plates, with the bolt screws,
available on special order.
• All MITUTOYO Surface Plates shipped F.O.B.
SPECIFICATIONS
Escondido, California.
100 lbs.-Load / sq. ft. no ledge
Inch
Size
AA Laboratory Grade
H
Acc.* Order No. Wt.
517-700 30
8 x 12” 3”
50
517-701 40
9 x 12” 3”
50
517-702 50
12 x 12” 3”
50
517-703 100
12 x 18” 4”
50
517-704 150
18 x 18” 4”
50
517-705 200
18 x 24” 4”
65
517-706 310
24 x 24” 5”
70
517-707 400
24 x 30” 5”
75
517-708 600
24 x 36” 6”
85
24 x 48” 8”
150 517-709 1000
30 x 36” 6”
100 517-710 800
30 x 48” 8”
150 517-711 1300
30 x 60” 12” 200 517-712 1900
36 x 36” 6”
100 517-713 900
36 x 48” 8”
150 517-714 1500
36 x 60” 12” 200 517-715 2850
36 x 72” 12” 250 517-716 3400
48 x 48” 8”
200 517-717 2025
48 x 60” 12” 250 517-718 3800
48 x 72” 12” 300 517-719 4500
48 x 84” 14” 350 517-720 6150
48 x 96” 14” 400 517-721 7000
48 x 108” 14” 500 517-722 7900
48 x 120” 18” 700 517-723 11300
48 x 144” 18” 800 517-724 13500
60 x 60” 14” 250 517-725 5500
60 x 72” 14” 350 517-726 6600
60 x 96” 14” 500 517-727 8800
60 x 120” 16” 700 517-728 11050
60 x 144” 18” 900 517-729 16950
72 x 72” 14” 400 517-730 8000
72 x 96” 16” 500 517-731 12025
72 x 120” 16” 700 517-732 15070
72 x 144” 18” 1000 517-733 20300
* Accuracies shown in microinches (µin)
H
2”
3”
3”
4”
4”
4”
4”
5”
5”
6”
5”
6”
10”
5”
6”
10”
10”
6”
10”
10”
12”
12”
12”
16”
16”
12”
12”
12”
14”
16”
12”
14”
14”
16”
A Inspection Grade
Acc.* Order No. Wt.
517-800 25
100
517-801 40
100
517-802 50
100
517-803 100
100
517-804 150
100
517-805 200
130
517-806 259
140
517-807 400
150
517-808 500
170
517-809 800
300
517-810 600
200
517-811 1000
300
517-812 1535
500
517-813 780
200
517-814 1200
300
517-815 2350
400
517-816 2850
500
517-817 1525
400
517-818 3150
500
517-819 3800
600
517-820 5325
700
517-821 6050
800
1000 517-822 6830
1400 517-823 10160
1600 517-824 12200
517-825 4800
500
517-826 5750
700
1000 517-827 7600
1400 517-828 11100
1800 517-829 15100
517-830 7000
800
1000 517-831 10800
1400 517-832 13400
2000 517-833 18100
E-45
H
2”
2”
3”
4”
3”
4”
3”
4”
4”
5”
5”
6”
8”
5”
6”
8”
8”
6”
8”
8”
10”
10”
10”
14”
14”
10”
10”
10”
12”
14”
10”
12”
12”
14”
B Shop Grade
Acc.* Order No.
517-900
200
517-901
200
517-902
200
517-903
200
517-904
200
517-905
260
517-906
280
517-907
300
517-908
340
517-909
600
517-910
400
517-911
600
1000 517-912
517-913
400
517-914
600
517-915
800
1000 517-916
517-917
800
1000 517-918
1200 517-919
1400 517-920
1600 517-921
2000 517-922
2800 517-923
3200 517-924
1000 517-925
1400 517-926
2000 517-927
2800 517-928
3600 517-929
1600 517-930
2000 517-931
2800 517-932
4000 517-933
Wt.
25
30
50
100
100
200
200
300
400
650
600
1000
1150
700
1200
1900
2300
1500
2525
3050
4450
5150
5700
8800
10500
4000
4900
6500
9800
14200
5700
9200
11400
15900
Inch
Size
8 x 12”
12 x 18”
18 x 24”
24 x 36”
36 x 48”
H
2”
3”
4”
5”
6”
50 lbs.-Load / sq. ft. no ledge
AA Laboratory Grade
A Inspection Grade
Acc. Order No.
Wt. H Acc. Order No. Wt.
50 517-740
25
2” 100 517-840
25
50 517-741
80
3” 100 517-841
80
65 517-742
200 3” 130 517-842
165
85 517-743
500 4” 170 517-843
400
150 517-746
1200 5” 300 517-846
1000
H
2”
2”
2”
3”
4”
Acc.
200
200
260
340
600
B Shop Grade
Order No. Wt.
517-940
25
517-941
60
517-942
100
517-943
300
517-946
800
ZE
SI
H
SIZE
Steel Stands
Steel Stands for supporting Black Granite Surface Plates, at
working levels, are available either stationary or with casters.
Sizes and weights are given below.
SPECIFICATIONS
Size
12 x 18”
18 x 18”
18 x 24”
24 x 24”
24 x 30”
24 x 36”
24 x 48”
30 x 36”
30 x 48”
30 x 60”
36 x 36”
36 x 48”
36 x 60”
36 x 72”
48 x 48”
48 x 60”
48 x 72”
48 x 84”
48 x 96”
48 x 108”
48 x 120”
48 x 144”
60 x 60”
60 x 72”
60 x 96”
60 x 120”
60 x 144”
72 x 72”
72 x 96”
72 x 120”
72 x 144”
Stationary
Order No.
517-950
517-951
517-952
517-954
517-955
517-956
517-957
517-960
517-961
517-962
517-963
517-964
517-965
517-966
517-967
517-968
517-969
517-970
517-971
517-972
517-973
517-974
517-975
517-976
517-977
517-978
517-979
517-980
517-981
517-982
517-983
Wt.
42lbs
46lbs
50lbs
65lbs
70lbs
73lbs
90lbs
85lbs
95lbs
105lbs
95lbs
105lbs
160lbs
180lbs
190lbs
200lbs
205lbs
320lbs
335lbs
350lbs
365lbs
430lbs
245lbs
340lbs
375lbs
455lbs
480lbs
380lbs
465lbs
510lbs
530lbs
With Casters
Order No.
517-950-1
517-951-1
517-952-1
517-954-1
517-955-1
517-956-1
517-957-1
517-960-1
517-961-1
517-962-1
517-963-1
517-964-1
517-965-1
517-966-1
517-967-1
517-968-1
517-969-1
517-970-1
517-971-1
517-972-1
517-973-1
517-974-1
Wt.
46lbs
50lbs
56lbs
69lbs
74lbs
77lbs
94lbs
89lbs
99lbs
109lbs
99lbs
109lbs
164lbs
184lbs
194lbs
204lbs
209lbs
324lbs
339lbs
354lbs
369lbs
434lbs
E-46
Note: The total height of stand and
granite plate is 36”. If ordering only
stand, stand height will be made
according to a Grade A granite plate
thickness.

E-1 Small Tool Instruments and Reference Gages Gage Blocks

Transcription

Similar documents

Gage Blocks

Gauge Block

Length Standard Gauge Blocks

Gauge Blocks

Standard Scales Working Standard Scales