Ladders - Liftway Limited

Ladders – Mobile Stands Without Handrails
NH Mobile Ladder Stands* – No Handrail
• 1" x 16 ga. round tube construction
• 15" platform depth
• 3" spring-loaded non-marking casters
• 24" x 7-1/2" deep non-slip raised, perforated, dimpled tread pattern
• 26" overall width
• 400 lb. capacity
• Painted blue enamel
Part
OPTIONS:
~ Extended platforms
Please call for details.
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
1NH
1
9
26x19
25
26x10x20
2NH
2
18
26x25
30
26x18x20
3NH
3
27
26x30
40
26x27x23
4NH
4
36
26x33
55
26x36x30
5NH
5
45
26x38
65
26x45x37
Number
Parts for all NH ladders
NH-SS Stainless Steel
Mobile Ladder Stands*
– No Handrail
• 1" stainless steel round tube construction
• Clean room finish
• 24" x 7-1/2" non-slip raised, perforated,
dimpled tread pattern
• 3" spring-loaded non-marking casters
• Platform 24" wide x 15" deep
• All components except casters and springs are
fabricated from high quality stainless steel
• Glass bead shot blast finish
• 400 lbs. capacity
• Ships all welded
OPTIONS:
~ Extended platforms
Please call for details.
Part
Number
No. of
Steps
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
5NH
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
1NH-SS
1
9
26x19
30
26x10x20
2NH-SS
2
18
26x25
40
26x18x20
3NH-SS
3
27
26x30
53
26x27x23
4NH-SS
4
36
26x33
62
26x36x30
5NH-SS
5
45
26x38
95
26x45x37
Rubber Pad assembly:
ANH Aluminum Mobile Ladder
Stands* – No Handrail
• 3/4" sched. 40 aluminum pipe construction
• 24" x 7-1/2" non-slip raised, perforated, dimpled
tread pattern
• 3" spring-loaded non-marking casters
• Platform 24" wide x 15" deep
• 300 lbs. capacity
• Ships all welded
Part
Number
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
1ANH
1
9
26x19
14
26x10x20
2ANH
2
18
26x25
24
26x18x20
3ANH
3
27
26x30
32
26x27x23
4ANH
4
36
26x33
37
26x36x30
5ANH
5
45
26x38
57
26x45x37
* •Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
•Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
•Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America
•Maximum rated load: 400 lbs (one person only)
See website for:
•Ladder Assembly Instructions and User Guide.
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands.
Stock item
www.canwayequipment.com 12.1
Ladders
3NH
Ladders – Safety Angle Mobile Stands Without Handrails
SNH Safety Angle Mobile Ladder Stands* – No Handrail
• 50° safety angle
• 1" x 16 ga. round tube construction
• 19" platform depth
• 3" spring-loaded non-marking casters
• 24" x 9-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• 26" overall width
• 400 lb. capacity
• Painted blue enamel
2SNH
Part Number
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
2SNH
2
20
26x33
47
26x19x24
3SNH
3
30
26x42
57
26x29x27
4SNH
4
40
26x51
67
26x38x34
3SNH
Parts for all SNH ladders
SNH-SS Stainless Steel
Safety Angle Mobile Ladder
Stands* – No Handrail
Ladders
• 1" Type 304 stainless steel round tube construction
• Clean room finish
• 24" x 9-1/2" non-slip raised, perforated, dimpled tread
pattern
• 3" spring-loaded non-marking casters
• Platform 24" wide x 19" deep
• 400 lbs. capacity
• Glass bead shot blast finish
• All components except casters and springs are
fabricated from high quality stainless steel
• Ships all welded
12.2
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
Rubber Pad assembly:
ANH Aluminum Safety Angle
Mobile Ladder Stands*
– No Handrail
• 3/4" sched. 40 aluminum pipe construction
• 24" x 9-1/2" non-slip raised, perforated, dimpled
tread pattern
• 3" spring-loaded non-marking casters
• Platform 24" wide x 19" deep
• 300 lbs. capacity
• Ships all welded
Part
Number
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
Part
Number
No. of
Steps
Platform
Height
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
2SNH-SS
2
20
26x33
47
26x19x24
2ASNH
2
20
26x25
28
26x19x24
3SNH-SS
3
30
26x42
57
26x29x27
3ASNH
3
30
26x30
34
26x29x27
26x38x34
4ASNH
4
40
26x33
40
26x38x34
4SNH-SS
4
40
26x51
67
* •Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
•Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
•Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America
•Maximum rated load: 400 lbs (one person only)
See website for:
•Ladder Assembly Instructions and User Guide.
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands.
www.canwayequipment.com
Stock item
Ladders – Mobile Ladder Stands With Handrails
H Mobile Ladder Stands* – With Handrails
• 1" x 16 ga. round tube construction
• 42" high handrail
• 15" platform depth
• 5"x1-1/4" RSX rubber swivel
casters on trip step mechanism
• 3" spring-loaded casters on 1H-3H
• Positive floor locking trip step
mechanism on 4H and up
• 24"x7-1/2" deep non-slip raised,
perforated, dimpled tread pattern
• 400 lb. capacity
• Painted blue enamel
6H
OPTIONS:
~ Front or side walk-through
(comes with safety chains)
~ Extended platforms
Please call for details.
3H
Part
No. of
Number Steps
Parts for 1H – 3H ladders
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
Part for 4H – 20H ladders
5RSX swivel
/w threaded
stem
Parts for H ladders
Rubber Pad assembly:
Platform Step
Height Width
(in.)
(in.)
Base
Size
(in.)
Weight
(lbs.)
Caster
Description
For all wheel & caster
info & details, please
see Section 13.
-6PO
6" polyolefin wheel
(4SH-7SH ladders)
-8PO
8" polyolefin wheel
(8SH-16SH ladders)
Wheel /Caster
Type & Size
(in.)
Shipping
Size (in.)
WxHxL
1H
1
9
24
26x19
35
2H
2
18
24
26x25
50
3H
3
27
24
26x30
60
4H
4
36
24
33x35
85
5H
5
45
24
33x40
95
6H
6
54
24
33x46
115
7H
7
63
24
33x56
125
8H
8
72
28
36x56
150
124x38x36
9H
9
81
28
36x61
170
136x38x44
10H
10
90
28
36x67
175
11H
11
99
28
36x72
180
12H
12
108
28
36x77
200
13H
13
117
28
36x82
215
14H
14
126
28
36x88
250
187x38x36
15H
15
135
28
36x93
260
197x38x41
16H
16
144
28
36x98
270
208x38x38
3" spring-loaded
non-marking
casters
16x28x51
24x28x61
31x28x70
37x28x78
5" rubber
casters
6" polyolefin
wheels
44x34x87
102x34x39
110x34x39
144x38x36
5" rubber
casters
8" polyolefin
wheels
155x38x37
166x38x34
177x38x38
The following ladders are special order and cannot be returned –
please check measurements carefully.
16H
17
153
28
46x104
315
18H
18
162
28
46x109
325
19H
19
171
8
46x115
345
20H
20
180
28
46x120
355
5" rubber
casters
8" polyolefin
wheels
219x46x38
229x46x38
240x46x38
249x46x38
* •Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
•Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
•Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
•Maximum rated load: 400 lbs (one person only)
See website for:
•Ladder Assembly Instructions and User Guide.
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands.
Stock item
www.canwayequipment.com 12.3
Ladders
17H
Ladders – Mobile Ladder Stands With Handrails
H-SS Stainless Steel Mobile Ladder Stands* – With Handrails
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
6H-SS
Base
Size
(in.)
Weight
(lbs.)
Wheel / Caster
Type & Size
(in.)
Shipping
Size (in.)
WxHxL
1H-SS
1
9
24
26x19
35
2H-SS
2
18
24
26x25
50
3H-SS
3
27
24
26x30
60
4H-SS
4
36
24
33x35
85
5H-SS
5
45
24
33x40
95
6H-SS
6
54
24
33x46
115
7H-SS
7
63
24
33x56
125
8H-SS
8
72
28
36x56
150
124x38x36
3" spring-loaded
non-marking
casters
Wheel
Description
For all wheel & caster
info & details, please
see Section 13.
16x28x51
24x28x61
31x28x70
37x28x78
5" rubber
casters &
6" polyolefin
wheels
44x34x87
102x34x39
110x34x39
9H-SS
9
81
28
36x61
170
136x38x44
10H-SS
10
90
28
36x67
175
144x38x36
11H-SS
11
99
28
36x72
180
12H-SS
12
108
28
36x77
200
13H-SS
13
117
28
36x82
215
14H-SS
14
126
28
36x88
250
187x38x36
15H-SS
15
135
28
36x93
260
197x38x41
16H-SS
16
144
28
36x98
270
208x38x38
5" rubber
casters &
8" polyolefin
wheels
-6PO or -8PO
6" or 8" polyolefin wheel
Parts for 1H-3H ladders
155x38x37
177x38x38
• 1" stainless steel round tube construction • Ships knocked down – assembly required on
6H and up
• Clean room finish
• All components except casters and springs are
• 7-1/2" deep non-slip raised,
fabricated from high quality stainless steel
perforated, dimpled tread pattern
• Positive floor locking trip step locking
OPTIONS:
mechanism on 4H and up
~ Front or side walk-through (comes
• Platform 15” deep
with safety chains)
• Glass bead shot blast finish
~ Extended platforms
• 400 lbs. capacity
Please call for details.
Ladders
AH Aluminum
Mobile Ladder
Stands* – With
Handrails
Part
No. of
Number Steps
Platform
Height
(in.)
Step
Width
(in.)
Base
Size
(in.)
Weight
(lbs.)
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
166x38x34
Part for 4H – 16H ladders
5RSX swivel
/w threaded
stem
Parts for H ladders
Rubber Pad assembly:
Wheel /Caster
Type & Size (in.)
1AH
1
9
24
26 x 19
21
2AH
2
18
24
26 x 25
30
3" spring-loaded
non-marking casters
Shipping
Size (in.)
WxHxL
16x28x51
24x28x61
3AH
3
27
24
26 x 30
36
• 3/4" sched. 40 aluminum pipe
construction
• 7-1/2" deep non-slip raised,
perforated, dimpled tread pattern
• Positive floor locking trip step locking
mechanism on 4H and up
• Platform 15" deep
• 300 lbs. capacity
• Ships assembled for 1AH - 5AH,
knocked down for 6AH - 16AH
4AH
4
36
24
33 x 35
51
5AH
5
45
24
33 x 40
57
5" rubber casters &
44x34x87
6AH
6
54
24
33 x 46
69
6" polyolefin wheels
102x34x39
7AH
7
63
24
33 x 56
75
110x34x39
8AH
8
72
28
36 x 56
90
124x38x36
9AH
9
81
28
36 x 61
102
136x38x44
10AH
10
90
28
36 x 67
105
5" rubber casters &
144x38x36
11AH
11
99
28
36 x 72
108
8" polyolefin wheels
155x38x37
12AH
12
108
28
36 x 77
120
166x38x34
OPTIONS:
~ Front or side walk-through
(comes with safety chains)
~ Extended platforms
Please call for details.
13AH
13
117
28
36 x 82
129
177x38x38
14AH
14
126
28
36 x 88
150
187x38x36
15AH
15
135
28
36 x 93
156
197x38x41
16AH
16
144
28
36 x 98
162
208x38x38
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
See website for more information.
12.4
www.canwayequipment.com
Stock item
31x28x70
37x28x78
Ladders – Safety Angle Mobile Stands with Handrails
SH Safety Angle Mobile Ladder Stands*
Caster
Description
• 50° safety angle ladder allows user to
face forward while descending
• 1" x 16 ga. round tube construction
• 42" high handrail
• 19" platform depth
• Positive floor locking trip step mechanism
• 9-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• 400 lb. capacity
• Painted blue enamel
3SH
For all wheel & caster
info & details, please
see Section 13.
-6PO
6" polyolefin wheel
(4SH-7SH ladders)
OPTIONS:
~ Front or side walk-through
(comes with safety chains)
~ Extended platforms
Please call for details.
-8PO
8" polyolefin wheel
(8SH-16SH ladders)
4SH – 16SH ladders
Rubber Pad assembly:
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
6SH
8SH
All SH ladders
5RSX
swivel /w
threaded
stem
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
Base
Size
(in.)
Weight
(lbs.)
Caster/Wheel
Size & Type
(in.)
Shipping
Size
WxHxL
2SH
2
20
24
26x33
50
3SH
3
30
24
26x42
65
4SH
4
40
24
33x55
105
5SH
5
50
24
33x64
120
6SH
6
60
24
33x72
135
7SH
7
70
24
33x80
145
8SH
8
80
28
36x88
175
142x47x38
9SH
9
90
28
36x97
205
155x49x38
10SH
10
100
28
36x105
230
11SH
11
110
28
36x113
250
12SH
12
120
28
36x121
270
13SH
13
130
28
36x130
290
14SH
14
140
28
36x138
315
221x48x38
15SH
15
150
28
36x146
340
234x50x43
16SH
16
160
28
36x154
365
247x48x43
30x63x28
3" spring-loaded
non-marking casters
35x73x28
5" rubber
casters &
6" polyolefin
wheels
41x82x28
58x92x34
116x47x34
129x46x34
168x47x38
5" rubber
casters &
8" polyolefin
wheels
181x47x38
195x44x38
208x48x38
* •Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
•Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
•Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
•Maximum rated load: 400 lbs (one person only)
See website for:
•Ladder Assembly Instructions and User Guide.
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands.
Stock item
www.canwayequipment.com 12.5
Ladders
2SH – 3SH ladders
Ladders – Safety Angle Mobile Stands with Handrails
SH-SS Stainless Steel Safety Angle Mobile
Ladder Stands*
Caster
Description
For all wheel & caster
info & details, please
see Section 13.
• 50° safety angle ladder
• 1" stainless steel round tube construction
• Clean room finish
• 42" high handrail
• 1" platform depth
• Positive floor locking trip step mechanism
• 9-1/2" deep non-slip raised, perforated, dimpled tread pattern
• Platform 19" deep
• 400 lbs. capacity
• Ships knocked down - assembly required for 6SH-SS – 16SH-SS
• Glass bead shot blast finish
• All components except casters and springs are fabricated
from high quality stainless steel
-6PO
6" polyolefin wheel
(4SH-7SH ladders)
-8PO
8" polyolefin wheel
(8SH-16SH ladders)
Ladders
OPTIONS:
~ Front or side walk-through (comes with safety chains)
~ Extended platforms
Please call for details.
12.6
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
Base
Size
(in.)
Weight
(lbs.)
Caster/Wheel
Size & Type
(in.)
Shipping
Size
WxHxL
2SH-SS
2
20
24
26x33
50
3SH-SS
3
30
24
26x42
65
4SH-SS
4
40
24
33x55
105
5SH-SS
5
50
24
33x64
120
6SH-SS
6
60
24
33x72
135
7SH-SS
7
70
24
33x80
145
8SH-SS
8
80
28
36x88
175
142x47x38
30x63x28
3" spring-loaded
non-marking casters
35x73x28
5" rubber
casters &
6" polyolefin
wheels
41x82x28
3" swivel
spring-loaded
caster,
c/w spring &
cotter pin
58x92x34
116x47x34
129x46x34
9SH-SS
9
90
28
36x97
205
155x49x38
10SH-SS
10
100
28
36x105
230
168x47x38
11SH-SS
11
110
28
36x113
250
12SH-SS
12
120
28
36x121
270
13SH-SS
13
130
28
36x130
290
14SH-SS
14
140
28
36x138
315
221x48x38
15SH-SS
15
150
28
36x146
340
234x50x43
16SH-SS
16
160
28
36x154
365
247x48x43
5" rubber
casters &
8" polyolefin
wheels
2 – 3SH-SS ladders
181x47x38
195x44x38
4 – 16SH-SS ladders
5RSX
swivel /w
threaded
stem
All SH-SS ladders
Rubber Pad assembly:
208x48x38
* •Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
•Complies with applicable safety standards as outlined in Ontario Occupational Health and Safety Act, Regulation 851
•Tested and approved by an Ontario Professional Engineer covering Ontario, Canada and United States of America
•Maximum rated load: 400 lbs (one person only)
See website for:
•Ladder Assembly Instructions and User Guide.
•Schematic Drawings with dimensions and isometric view
•Canway Certification Statement covering Mobile Ladder Stands.
www.canwayequipment.com
Stock item
Ladders – RIP Mobile Ladder Stands
HR RIP Mobile Ladder Stands*
Caster
Description
• Rotates in Place (RIP) to reduce turning radius in tight situations
• 1" x 16 ga. round tube construction
• 42" high handrail
• 15" platform depth
• Positive floor locking trip step mechanism
• 7-1/2" deep non-slip raised, perforated, dimpled tread pattern
• 400 lb. capacity
• Painted blue enamel
For all wheel &
caster info &
details, please see
Section 13.
OPTIONS:
~ Front or side walk-through (comes with safety chains)
~ Extended platforms
Please call for details.
Base
Size
(in.)
Weight
(lbs.)
Caster/Wheel
Size & Type
(in.)
6HR
6
54
28
33x72
165
7HR
7
63
28
33x80
180
4" rubber casters & 34x103x37
6" polyolefin wheels
34x110x37
8HR
8
72
28
36x88
205
34x125x37
9HR
9
81
28
36x97
220
34x136x37
10HR
10
90
28
36x105
240
34x147x37
11HR
11
99
28
36x113
255
12HR
12
108
28
36x121
270
13HR
13
117
28
36x130
290
14HR
14
126
28
36x138
310
34x187x37
15HR
15
135
28
36x146
330
34x197x37
16HR
16
144
28
36x154
355
34x208x37
4" rubber
casters &
8" polyolefin
wheels
Shipping
Size
WxHxL
-8PO
8" polyolefin wheel
(8SH-16SH ladders)
HR & HR-SS ladder
parts
34x157x37
34x166x37
34x177x37
HR-SS Stainless Steel RIP Mobile
Ladder Stands*
• Rotates in Place (RIP) to reduce turning radius in tight situations
• 1" stainless steel round tube construction
• Clean room finish
Part
No. of Platform
• 42" high handrail
Number Steps Height
(in.)
• 4" x 1-1/4" RSX rubber swivel casters
• Positive floor locking trip step
6HR-SS
6
54
locking mechanism
7HR-SS
7
63
• 7-1/2" deep non-slip raised, perforated,
8HR-SS
8
72
dimpled tread pattern
9HR-SS
9
81
• Platform 28" wide x 15" deep
10HR-SS
10
90
• 400 lb. capacity
11HR-SS 11
99
• All components except casters and springs
are fabricated from high quality stainless steel 12HR-SS 12
108
• Ships knocked down - assembly required
13HR-SS 13
117
• Glass bead shot blast finish
14HR-SS 14
126
OPTIONS:
~ Front or side walk-through
(comes with safety chains)
~ Extended platforms
Please call for details.
Rubber Pad
assembly:
Caster/Wheel
Size & Type
(in.)
4RSX
swivel /w
threaded
stem
Step
Width
(in.)
Base
Size
(in.)
Weight
(lbs.)
28
33x72
165
28
33x80
180
4" rubber casters & 34x103x37
6" polyolefin wheels
34x110x37
28
36x88
205
34x125x37
28
36x97
220
34x136x37
28
36x105
240
34x147x37
28
36x113
255
28
36x121
270
28
36x130
290
28
36x138
310
34x187x37
4" rubber
casters &
8" polyolefin
wheels
Shipping
Size
WxHxL
34x157x37
34x166x37
34x177x37
15HR-SS
15
135
28
36x146
330
34x197x37
16HR-SS
16
144
28
36x154
355
34x208x37
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
Stock item
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
www.canwayequipment.com 12.7
Ladders
8HR
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
-6PO
6" polyolefin wheel
(4SH-7SH ladders)
Ladders – RIP Mobile Ladder Stands
SHR RIP Safety Angle Mobile Ladder Stands*
• Rotates in Place (RIP) to reduce turning
radius in tight situations
• 50° safety angle ladder
• 1" x 16 ga. round tube construction
• 42" high handrail
• 19" platform depth
• Positive floor locking trip step
locking mechanism
• 9-1/2" deep non-slip raised, perforated,
dimpled tread pattern
Caster
Description
For all wheel &
caster info &
details, please see
Section 13.
• 400 lb. capacity
• Painted blue enamel
OPTIONS:
~ Front or side walkthrough (comes with
safety chains)
~ Extended platforms
Please call for details.
Part
No. of Platform Step
Number Steps Height Width
(in.)
(in.)
Base
Size
(in.)
Weight
(lbs.)
6SHR
6
60
28
36x72
190
7SHR
7
70
28
36x80
215
Caster/Wheel
Size & Type
(in.)
-6PO
6" polyolefin wheel
(4SH-7SH ladders)
Shipping
Size
WxHxL
5" rubber casters & 37x118x41
6" polyolefin wheels
37x131x41
8SHR
8
80
28
36x88
240
37x144x41
9SHR
9
90
28
36x97
265
37x157x41
10SHR
10
100
28
36x105
290
37x170x41
11SHR
11
110
28
36x113
315
37x183x41
12SHR
12
120
28
36x121
330
13SHR
13
130
28
36x130
350
14SHR
14
140
28
36x138
365
37x223x41
15SHR
15
150
28
36x146
385
37x236x41
16SHR
16
160
28
36x154
405
37x249x43
5" rubber
casters &
8" polyolefin
wheels
37x197x41
-8PO
8" polyolefin wheel
(8SH-16SH ladders)
SHR ladder parts
Rubber Pad
assembly:
37x210x41
5RSX
swivel /w
threaded
stem
7SHR
Ladders
SHR-SS Stainless Steel RIP Safety Angle Mobile Ladder Stands*
12.8
• Rotates in Place (RIP) to reduce turning
radius in tight situations
• 1" stainless steel round tube construction
• Clean room finish
• 50° safety angle ladder
• 42" high handrail
• 19" platform depth
• Positive floor locking trip step
locking mechanism
• 9-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• 400 lb. capacity
• Glass bead shot blast finish
• All components except casters and springs are
fabricated from high quality stainless steel
• Ships knocked down - assembly required
OPTIONS:
~ Front or side walk-through
(comes with safety chains)
~ Extended platforms
Please call for details.
Part
Number
No. of Platform Step
Steps Height Width
(in.)
(in.)
Base Weight
Size
(lbs.)
(in.)
Shipping
Size
WxHxL
6SHR-SS
6
60
24
33x72
190
7SHR-SS
7
70
24
33x80
215
5" rubber casters & 37x118x41
6" polyolefin wheels
37x131x41
8SHR-SS
8
80
28
36x88
240
37x144x41
9SHR-SS
9
90
28
36x97
265
37x157x41
10SHR-SS
10
100
28
36x105
290
37x170x41
11SHR-SS
11
110
28
36x113
315
12SHR-SS
12
120
28
36x121
330
13SHR-SS
13
130
28
36x130
350
14SHR-SS
14
140
28
36x138
365
37x223x41
15SHR-SS
15
150
28
36x146
385
37x236x41
16SHR-SS
16
160
28
36x154
405
37x249x43
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
www.canwayequipment.com
Caster/Wheel
Size & Type
(in.)
Stock item
5" rubber
casters &
8" polyolefin
wheels
37x183x41
37x197x41
37x210x41
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
Ladders – Mechanic’s Ladder
ML – Mechanic’s Ladder*
• Tilt and roll mobility
• 1" x 16 ga. round tube construction
• 24" wide x 22-1/2" deep platform
• 7-1/2" deep non-slip perforated steps
• 24" wide x 10" deep removable tool shelf
• Two 5" dia. rubber wheels
• 400 lb. capacity
• Painted blue enamel
Part Number
Shelf Detail
No. of
Steps
Platform
Height
(in.)
ML-3H
3
27
ML-4H
4
36
ML-5H
5
45
ML-6H
6
54
Base
Size
(in.)
Overall Weight
Height (lbs.)
(in.)
Shipping
Size (in.)
WxHxL
Parts for ML ladders
5RSX wheel
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
Stock item
Rubber Pad assembly:
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
www.canwayequipment.com 12.9
Ladders
ON
I
T
C
U
STR
N
O
C
ER
D
n
N
o
o
U
s
E
e
G
PA
com
o
t
o
f
in
e
r
o
m
~
Ladders – Tilt and Roll Ladder
TR- Tilt and Roll Ladder*
• Tilt and roll into position
• 1" x 16 ga. round tube construction
• Extra large platform 24" wide x 22-1/2" deep
• Ladder rolls on two 5" diameter rubber wheels
• Rests on four 2-1/2" dia. rubber pads to secure ladder to
floor during use
• 42" high handrail
• 24" wide x 7-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• 26" overall width
• 400 lb capacity
• Painted blue enamel
Part Number
No. of
Steps
Platform
Height
(in.)
2H-TR
2
18
3H-TR
3
27
4H-TR
4
36
5H-TR
5
45
6H-TR
6
54
Base
Size
(in.)
Overall Weight
Height (lbs.)
(in.)
Shipping
Size (in.)
WxHxL
Parts for ML ladders
5RSX wheel
2H-TR
Rubber Pad assembly:
N
O
I
T
C
TRU
S
N
O
C
R
E
D
N
on
o
U
s
E
e
G
m
PA
co
o
t
o
f
n
i
~ more
Ladders
3H-TR
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
12.10 www.canwayequipment.com
Stock item
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
Ladders – SL Series Shelf Lift Mobile Ladder Stands
ESL Electric Mobile Ladder Stands*
• 12 volt low maintenance Dry Cell Battery c/w onboard charger system
• Upgraded heavy duty WARN 1200 Series industrial winch
• Industrial contact limit switches at top and bottom position for additional safety
• Requires 110 volt duplex power outlet for battery charger (not included)
• Power system only requires battery terminal cables to be connected at
time of assembly
• Heavy duty 300 lb. capacity cargo shelf, 30" x 30"
• Integral shelf column mounted vertically on back of ladder stand c/w
extended reinforced chassis
• 1" x 16 ga. round tube construction
• 42" high handrail
• 22-1/2" platform depth
• Two 5" x 1-1/4" RSX rubber swivel casters and
two 6" x 2" mold on rubber casters
• Positive floor locking trip step mechanism
• 7-1/2" deep non-slip raised, perforated, dimpled tread pattern
• Painted blue enamel
• Modular knock down "KD" construction for compact shipping
Control Switch
9H-ESL
Winch & Battery Detail
Caster
Description
No. of
Steps
Platform
Height
(in.)
Step
Width
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
7H-ESL
7
63
28
36x87
455
113x36x61
8H-ESL
8
72
28
36x92
465
127x36x61
9H-ESL
9
81
28
36x97
485
137x36x61
10H-ESL
10
90
28
36x102
515
148x36x61
11H-ESL
11
99
28
36x107
535
158x36x61
12H-ESL
12
108
28
36x114
555
169x36x61
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
For all wheel &
caster info & details,
please see Section 13.
ESL ladder parts
Rubber Pad
assembly:
5RSX
swivel /w
threaded
stem
-6MR
6" mold on rubber
caster
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
Stock item
www.canwayequipment.com 12.11
Ladders
Part
Number
Ladders – SL Series Shelf Lift Mobile Ladder Stands
MSL Manual Mobile Ladder
Stands*
• Heavy duty 300 lb. capacity cargo shelf, 30" x 30"
• Integral shelf column mounted vertically on back of ladder
stand c/w extended reinforced chassis
• 1" x 16 ga. round tube construction
• 42" high handrail
• 22-1/2" platform depth
• Two 5" x 1-1/4" RSX rubber swivel casters and
two 6" x 2" mold on rubber casters
• Positive floor locking trip step mechanism
• 7-1/2" deep non-slip raised, perforated,
dimpled tread pattern
• Painted blue enamel
• Modular knock down "KD"
construction for compact
shipping
Platform Detail
10H-MSL
Shipping Position
Ladders
Caster
Description
Part
Number
No. of
Steps
Platform
Height
(in.)
Step
Width
(in.)
Base
Size
(in.)
Weight
(lbs.)
Shipping
Size(in.)
WxHxL
7H-MSL
7
63
28
36x87
355
113x36x61
8H-MSL
8
72
28
36x92
365
127x36x61
9H-MSL
9
81
28
36x97
385
137x36x61
10H-MSL
10
90
28
36x102
415
148x36x61
11H-MSL
11
99
28
36x107
435
158x36x61
12H-MSL
12
108
28
36x114
455
169x36x61
For all wheel &
caster info & details,
please see Section 13.
ESL ladders parts
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
12.12 www.canwayequipment.com
Stock item
Rubber Pad
assembly:
5RSX
swivel /w
threaded
stem
-6MR
6" mold on rubber
caster
See website for:
• Ladder assembly instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
Ladders – Crossover Ladders
Crossover Ladder - 60°
• Provides safe walkway over conveyors, machinery,
pipes, and other obstacles
• 1" dia. tube construction
• Standard perforated raised dimpled step
• 60° standard slope
• 400 lb. capacity
• Ships unassembled in two pieces, bolts easily
together
• Painted blue enamel
Part
Number
No. of Platform Clearance Weight
Steps Size (in.)
(in.)
(lbs.)
WxL
HxW
Standing
Size(in.)
LxWxH
Shipping
Size (in.)
WxHxL
4HCO-30
4
24x 30
35x 15
150
62x29x78
44x85x31
4HCO-45
4
24x45
35x30
165
77x29x78
53x88x31
4HCO-60
4
24x60
35x45
184
92x29x78
98x59x31
5HCO-30
5
24x30
44x15
165
73x29x87
44x96x31
5HCO-45
5
24x45
44x30
183
87x29x87
52x98x31
5HCO-60
5
24x60
44x 45
201
102x29x87
58x108x31
6HCO-30
6
24x30
53x15
181
83x29x96
43x107x31
6HCO-45
6
24x45
53x30
199
98x29x96
52x108x31
6HCO-60
6
24x60
53x45
218
113x29x96
48x118x31
Crossover Ladder - 50°
• Provides safe walkway over conveyors,
machinery, pipes, and other obstacles
• 1" dia. tube construction
• Standard perforated raised dimpled step
• 50° stairway slope
• 400 lb. capacity
• Ships unassembled in two pieces,
bolts easily together
• Painted blue enamel
No. of Platform Clearance Weight
Steps Size (in.)
(in.)
(lbs.)
WxL
HxW
Standing
Size(in.)
LxWxH
Shipping
Size (in.)
WxHxL
4SHCO-30
4
24x30
39x19
161
85x29x82
46x93x31
4SHCO-45
4
24x45
39x34
179
100x29x82
54x92x31
4SHCO-60
4
24x60
39x49
198
115x29x82
58x105x31
5SHCO-30
5
24x30
49x19
181
98x29x92
44x106x31
5SHCO-45
5
24x45
49x34
218
128x29x92
52x108x31
5SHCO-60
5
24x60
49x49
210
129x29x92
58x119x31
6SHCO-30
6
24x30
59x19
201
116x29x107
45x120x31
6SHCO-45
6
24x45
59x34
219
131x29x102
52x119x31
6SHCO-60
6
24x60
59x49
237
146x29x102
58x130x31
* • Complies with mobile ladder standards ANSI 14.7 and OSHA 1910.29
• Complies with applicable safety standards as outlined in Ontario
Occupational Health and Safety Act, Regulation 851
• Tested and approved by an Ontario Professional Engineer covering
Ontario, Canada and United States of America
• Maximum rated load: 400 lbs (one person only)
Stock item
Ladders
Part
Number
5SHCO-60
See website for:
• Ladder Assembly Instructions and User Guide.
• Schematic Drawings with dimensions and
isometric view
• Canway Certification Statement covering
Mobile Ladder Stands.
www.canwayequipment.com
12.13
Ladders – Options
Ladders
Gated Walk-through Options on H Series Ladders
FWT-SG
Single Gate Front
Walk-through
6H-FWT, Gate Closed
FWT-DG
Double Gate Front
Walk-through
6H-FWT, Gate Open
LWT-SG
Single Gate Left
Walk-through
12.14 www.canwayequipment.com
RWT-SG
Single Gate Right
Walk-through
Stock item
Ladders – Rolling Dock Ladder
RDL Rolling Dock
Ladder
Ladders
• Safe alternative for sealing and unsealing open
top shipping containers
• Extendable platform c/w incremental locking pin
• Compact side wall mount design “Easy Roll”
track system to maintain optimum clearance
• Typically installed in pairs for optimum efficiency
when in use
• Special orders available for unique applications
www.canwayequipment.com
12.15
Ladders – Bus Access Platform
BAP – Bus Access Platform
Ladders
• Provides save, enclosed work area for roof-top access and maintenance
• Lockable swing gates
• Platform includes heavy-duty phenolic swivel caster c/w foot brakes and 24" adjustable outriggers for optimal stability
• Electric shelf lift for battery maintenance and replacement
• 12 volt low maintenance dry cell battery c/w onboard charger system
• Upgraded heavy duty WARN
1200 Series industrial winch
• Industrial contact limit switches
at top and bottom position
for additional safety
• Requires 110 volt duplex
power outlet for battery
charger (not included)
• Power system only requires
battery terminal cables to be
connected at time of assembly
• Heavy duty 300 lbs. capacity
cargo shelf
• Integral shelf column mounted
vertically on back of ladder
stand, c/w extended reinforced
chassis.
12.16 www.canwayequipment.com