Features Overview Band Tri-Scragg Mill

Band Tri-Scragg
Mill
Overview
T
he Baker Band TriScragg Mill features the
highest production possible with its three thin-kerf
band heads. The two vertical heads slab the log while
the horizontal head in the
back splits the block into two
three-sided cants, ready to be
resawn. Its improved design
boasts a log positioning system that features three holdover wheels in front and two
behind the head.
Each machine is custombuilt for the length of your
material. You get high production, and low maintenance.
With this thin-kerf scragg, you
can utilize up to 80%* of your
log. You can’t get this kind of
recovery along with the highest throughput on the market
today anywhere else.
Features
• Accepts scragg blocks 4” to 16” • Baker’s exclusive design dipin diameter, and 36” to 60”
dog chain
long standard
• Operator’s control station
• Gives the highest yield up to
• Debarking logs is highly recom80%*
mended
• Proven to produce up to 30,000
*Actual recovery rate and production dictated
bf per day*
by log diameter.
• Dip-dog chain with drop links
every 12” to allow end-to-end
feeding providing the highest
possible production
• Hydraulically-driven blade
positioning system on all headrigs
• Slabs discharge either left, right
or rear
• Uniframe construction
• Star washer hold-downs in the
front and rear of vertical heads
• Band blades cut with 1⁄16”+ kerf
• 3-sided self-centering feedworks on back splitter head
PO Box 128
Ellington, Missouri 63638 USA
E-mail: [email protected]
Fax: (573) 663-2787
Phone: (573) 663-7711
Band Tri-Scragg
Mill
Specifications Production Rate: 20,000 to 30,000 bf per day, Dimensions & Weight:
depending on log diameters*
Length: Varies
Width: 871⁄2“ (2.22 m)
Band Wheels: Dynamically balanced 28 in.
Height: 931⁄2” (2.37 m)
solid steel wheels
Weight: 5,000 lbs. (2,268 kg)
Guides: Baker Low-Profile Flat Guides with
hardened tool steel guide plates
Width Adjustment: 2-point hydraulic setworks
Blades: 1” or 11⁄4” wide, 13’-2” or 14’-2” long
Controls: Remote electrical pedal mounted
control start/stop station E-stop button
Band Blade Tensioning: Spring
Sawdust Removal: Two 6” dust pipe outlet
handles the dust from both vertical heads and
one 4” outlet provided for dust removal from
the horizontal band headrig (3,200 CFM)
Electrical: All voltages available; Standard:
220V or 440V 3-phase 60HZ; machine completely prewired; NEMA 12 enclosure with
starters, disconnects, control voltage transformer and circuit overload protectors; start/
stop station with E-stop button
Power
Motors: Three 20 HP (15 kw) TEFC, Hydraulic Up to 15 HP (11 kw) available; 1,500 PSI - 
Power Unit on feedworks
sized to accommodate options
Capacities
13’-2” Band Length Heads
14’-2” Band Length Heads
Standard Log Size Diameters:4” (102 mm)
diameter minimum12” (305 mm) diameter
maximum
Standard Log Size Diameters:
4” (102 mm) diameter minimum
16” (406 mm) diameter maximum
Log Lengths:
36” (91 cm) minimum
60” (152 cm) maximum*
Log Lengths:
36” (91 cm) minimum
60” (152 cm) maximum*
*Longer length up to 96” available upon request
Options

Electronic 10-Point setworks, PLC controlled
Operator’s saw cab
Band Tensioning: Available with air bags
Air conditioning for saw cab
Log infeed deck
Heater for saw cab
Stop end loader/Pac-man
Log turner/positioner
Complementary equipment such as edgers,
double end trims, band slab edgers, resaws,
connecting conveyors, etc, are available.
Cant 90° discharge
Baker Quik-sharp band blade sharpener
Complete systems
Log debarker and log merchandising
Product specifications are subject to change without notice.
PO Box 128
Ellington, Missouri 63638 USA
E-mail: [email protected]
Fax: (573) 663-2787
Phone: (573) 663-7711
www.baker-online.com
02/15/01