AD Base 3 2015 - Engravers Network

Base 3
The Advantage Base 3 has been designed specifically for the
Universal Versa laser engraver. The dimensions of the unit allow
the Versa laser to fit perfectly onto the extractor, effectively
doubling it up as a work station. The unit is also offered with an
onboard air compressor to provide the laser with its air assist
requirements and comes complete with extraction hose kit and
compressor link up on compressor models.
The Laser Companion
Advantage extraction
system for the laser
engraving industries.
standard features:
•
Filter condition indicator
•
Low noise levels
•
DeepPleat DUO pre filter
optional features:
•
VOC gas sensors (Volatile Organic Compound)
•
Onboard compressor
•
Remote stop / start interface
•
Filter change / System fail signal
Featuring DeepPleat DUO
filter technology
Featuring Advanced
Carbon Filter technology
airflow through filters
Part Numbers
Model
Voltage
Part No.
24V Stop / Start
AD Base 3
Powder Coated
230V
L0342A
A2001
115V
L0341A
Filter change /
System failure signal
A2002
VOC
Monitoring
A2003
Compressor
Chemical Filter
A2007
Small particulate is held
in the HEPA filter
HEPA Filter
Pre Filter
REPLACEMENT FILTERS
Model
DeepPleat DUO Pre Filter
Combined Filter
AD Base 3
A1030045
A1030050
Clean Air
Medium sized particulate
held in the filter media
Contaminated Air
Velocity drops
through expansion
technical data
230V
Dimensions (HxWxD)
115V
770 x 680 x 470mm
30.3 x 26.8 x 18.5”
Cabinet Construction
Powder coated mild steel
Powder coated mild steel
Airflow / Pressure
180m³/hr / 30mbar
105cfm / 30mbar
Electrical Data
230v 1ph 50/60Hz
Full load current: 0.9 amps / 0.35kw
115v 60/50Hz
Full load current: 1.2 amps / 0.35kw
Noise Level
< 56dBA*
< 56dBA*
Weight
65kg
143lbs
technical specification
1
2
3
4
5
* At typical operating speed.
DeepPleat DUO Pre Filter
specifications
Surface Media Area
12m2
Filter Media
Glass Fibre
Filter Media Construction
Maxi Pleat Construction with
Webbing Spacers
Filter Housing
Mild Steel
Filter Efficiency
F8 (95% @ 0.9 microns)
hose kit
75-75mm kit
6 9 7
Part No. A1020017
Glass Fibre
HEPA Media Construction
Maxi Pleat
Surface Media Area
2.75m2
Treated Activated Carbon
9kgs
Filter Housing
Mild Steel
Filter Efficiency
99.997% @ 0.3 microns
8
4
6
7
8
9
10
Power Cable
Motor Cooling Inlet
Motor Cooling Outlet
Compressed Air Outlet
Castors
2
1
1.5m 75mm Flexible Hose
2 x Connection Cuffs
75mm - 75mm Kit
3
Combined Filter specifications
HEPA Filter Media
Unit / Filter Condition Display
On / Off Switch
Door Hinge
Extracted Air Outlet
Hose Inlet Connection - 75mm
75-75mm kit
10
5
Other hose kits and filters are available. All of the above units are fitted with our standard filter combinations. For specific
applications please call us for details. Replacement filters should always be ordered using the part number on the filters inside
your extractor to ensure the correct filter is ordered. Datasheet correct at time of print.
Date:8/3/13 V:2
Bofa International Ltd
Tel: +44 (0) 1202 699 444 Fax: +44 (0) 1202 699 446
Bofa Americas, Inc
Tel: (618) 205 5007 Fax: (866) 707 2632
Email: [email protected]
Email: [email protected]
Web: www.bofa.co.uk
Web: www.bofaamericas.com
British Quality