catalog racks and products soimer

Protection for your equipment
Protection
Manufacture
Distribution
SOIMER TELECOMUNICACIONS, S.L. was founded to satisfy the needs of our costumers. We take
into account the quality standards demanded by today’s market.
We focus our activity on the design, manufacture and distribution of metal enclosures for
electronics and telecommunications.
Our products are borne out by more than 25 years of experience in the sector. They are designed
with the best technologies in project development and manufacturing systems.
We offer a highly qualified team who will advise you when you need it.
Trust Soimer Telecomunicacions, SL the protections of your equipments.
Experts at
your service
Our products are backed by the experience of over 25 years in the industry and
project development and manufacturing systems.
Index PRODUCTS
6
DOMOS
DOMOS
DOMOS
DOMOS
DOMOS
9
SWING RACK
RACK ETSI
MURAL
PC
INUIT
10 11
OUTDOOR RACK
12 13
CLUSTER
14 15
19” SUBRACK
16 16
PDU
17 18
SWITCHED PDU
19 21
ATS
22 26
FURNITURE
27 28
ELM
29 30
ACCESSORIES
31 47
Índex ACCESSORIES
MAGNET BOX
COVERS AND MODULES
SIMPLES DOORS
DOUBLE DOORS
FRONTAL SHELF 19”
SIMPLE SHELF 50kg y 100kg
TELESCOPIC SHELF
KEYBOARD SHELF
19” DRAWER
PLINTH
19” FRONT PANELS
CABLE HOOP
VERTICAL CABLE TRAY
SIMPLE GUIDE
19” BRUSH PANEL
19” RINGS CABLE MANAGEMENT PANEL
19” CABLE MANAGEMENT PANEL WITH COVER
2 SPEED TURBINE
19” 1U FAN UNIT
FAN UNIT
THERMOSTAT
FILTER FANS
ROOF FILTER FAN RFP 018 SERIES
FAN HEATERS
ELECTRONIC HYGROTHERM
DOOR SWITCH KIT
MAGNETIC COMPACT LAMP
025 LED LAMP
SECURITY LOCKS
BAYING KIT
EARTH CONTINUITY KIT
IEC CABLE
SOCKET STRIPS
BOLTING DOWN CLAMP KIT
CASTORS
ASSEMBLY GROUP AND CAGED NUT
M10 LIFTING EYE
1
1
2
3
4
4
4
5
5
5
6
6
7
7
8
8
8
9
9
10
10
11
11
12
12
13
13
13
14
14
15
15
15
16
16
16
16
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
PÁG
DOMOS
SWING RACK
This rack cabinet has been designed for
telecommunications, electric industries,
telephony …
Technical characteristics
Made of scheet steel 1.5 and 2mm thick
Easy dissemble frame.
Swing rank of 40U.
Back cover with filter.
Upper cover (steel or vented)
Front door with safety glass.
Earth continuity kit.
Dimensions
2.000 mm x 800 mm x 600 mm
2.100 mm x 800 mm x 600 mm
*(with 100 mm plinth)
2.200 mm x 800 mm x 600 mm
*(with 200 mm plinth)
Standards
According to 19” norm:
IEC 60 297 / DIN 41 494 / UNE 20 539 According to IP 30 Protection norm:
IEC 60 529 / DIN 400 50 / UNE 20 324
According to load rating norm:
IEC 61 587-1 / UNE EN 61 587-1
RAL 7035
6
DOMOS
This
rack
cabinet
of
the
active
has
been
designed
equipments
and
for
the
ETSI
installation
telecommunications.
It has two 19” or 21” mounts, adjustable in depth. The roof is specially
mechanized to fiber input from the top.
Technical characteristics
Composition:
1 frame made of sheet steel 2mm thick.
2 side panels.
1 glass door.
1 back steel door.
2 19” or 21” front mounts.
6 mount supports.
1 Earth continuity kit.
Physical access:
Free access by frontal and back doors and side panels.
Cable entry
By plinth: by the middle.
By top
RAL 7035
RAL 7031
DOMOS RACK ETSI
Width
Height
Depth
Code
2200X600X300 483 Base
300
DR080052
2200X600X600 483 Base
600
DR080053
2200X600X300 483 Pv
300
DR080054
2200X600X600 483 Pv
600
DR080055
2200X600X300 533 Base
300
DR080056
600
DR080057
300
DR080058
2200X600X600 533 PV
600
DR080059
2200X600X300 19” PV
300
DR080060
2200X600X600 19” PV
600
DR080061
2200X600X300 19” Base
300
DR080062
2200X600X600 19” Base
600
DR080063
2200X600X600 533 Base
2200X600X300 533 PV
600
2200
7
DOMOS
The Domos Mural range combines style and functionality. It allows an easy and quickly installation of the
equipment inside the wall mount cabinet.
It has been designed for networking solutions.
Technical characteristics
• Light frame to make easy the installation.
• Frontal door with safety glass.
• Back plate to wall mounting.
• Side panels with easy access.
• Security locks with the same key for panels and doors.
• 19” mounts adjustable in depth.
• Cut-outs on the top and the bottom frames to make easy the
cable access and to mount fans.
• Earth continuity kit.
One
Un Part
cuerpo
Dos cuerpos
Two Parts
RAL 9005
One Part
MURAL DOMOS
Width
Height
06 U
346,5
09 U
479,9M
12 U
613,3M
15 U
06 U
8
Two Parts
600
Depth
400
746,6M
346,5
09 U
479,9M
12 U
613,3M
15 U
746,6M
500
Code
MURAL DOMOS
Width
Height
MD050001
06 U
346,5
D050002
09 U
479,9M
D050003
12 U
613,3M
D050004
15 U
MD050005
06 U
D050006
09 U
479,9M
D050007
12 U
613,3M
D050008
15 U
746,6M
600
Depth
Code
MD050009
500
746,6M
D050010
D050011
D050012
346,5
MD050013
650
D050014
D050015
D050016
DOMOS
This rack cabinet has been designed to
different
applications
such
as:
active
equipments
installations,
structured
cabling
of
control
and
computing
management.
We have a wide range of accessories for all the
applications.
Technical characteristics
Composition:
1 frame made of sheet steel 2mm thick.
2 side panels.
1 upper glass door.
1 lower steel door.
1 back steel door.
2 fixed selves.
1 top cover.
1 lower cover.
Physical access
By doors and sides. All of them with lock.
Cable entry
By plinth: it depends on the configuration.
By top: it depends on the configuration.
Dimensions
Width: 1700 mm
Height: 600 mm
Depth: 600 mm
Description
Width
Height
Depth
DOMOS RACK PC 33U 600X600
600
1600
600
Code
DR080214
Código
RAL 7035
RAL 7031
9
INUIT
Inuit rack has been designed for installations
where security and stability are very important
factors to be considered. Obviously, we have also
considered design and aesthetic as important factors.
This rack has load capacity.
The applications for this rack can be diverse.
The most common are: structured cabling,
networking, servers and equipments and housing.
The most important point in this design is the maximum
natural ventilation in the rear door.
This is possible because it has a perforated
surface that allows passing the air. As a result,
the internal cooling is between 75% and 80%.
We have a wide range of accessories for all applications.
Technical characteristics
Manufactured with 1,5 and 2 mm sheet steel.
Solid frame, it can be easy to dissemble.
Front door with safety glass.
Back vented door.
Side panels with easy access to the interior of the rack.
Three points safety locks with the same key for panels
and doors.
Tap cover with perforations to install fans or cable
access by outside.
4 adjustable feet.
4 19” mounts.
4 conduit supports in 800 width rack.
Earth continuity kit.
Double glass, steel or vented doors (optional).
RAL 9005
Standards
According to 19” norm:
IEC 60 297 / UNE 20 539
According to IP 30 Protection norm:
IEC 60 529 / UNE 20 324
According to load rating norm:
IEC 61 587-1 / UNE EN 61 587-1
Front and rear vented doors.
INUIT
24U
42U
47U
10
Width
600
800
600
800
600
800
Height
Depth
IR020112
1200
2000
2200
Code
IR020113
1000
IR020114
IR020115
IR020116
IR020117
INUIT
Front glass door and rear vented door.
Width
Height
Depth
INUIT
600
24U
1200
800
600
42U
2000
800
600
47U
2200
800
Code
600
IR020251
800
IR020100
1000
IR020101
800
IR020102
1000
IR020103
600
IR020245
800
IR020104
1000
IR020105
800
IR020106
1000
IR020107
600
IR020246
800
IR020108
1000
IR020109
800
IR020110
1000
IR020111
11
Rack Frame made of 20/10 galvanized sheet steel.
Dimensions 600x2015x600 mm.
The top has been manufactured with 20 mm slope to avoid fluid
accumulation.
It has a plinth with rear access for cable entry.
From 200 to 300 micron with embossed RAL 7035 polyester gofrado.
IP55 protection. Adaptation to add air conditioning equipments.
Doors and side panels
Front and rear doors and side panels made with galvanized steel.
Locking system with 3 fixing points.
Opening hinged doors 180º rotation.
Doors and side panels with EPDM protection.
Panel mounts
The frame includes four panel mounts for 19” equipments
installation.
The frame allows the installations of the panel mounts with 25 mm
displacement
Made of 15/10 galvanized steel.
According to the 19” norm: DIN10050 / UNE 20324
Finished.
200 micron covering with embossed RAL 7035 polyester.
Possibility to add a fan unit under the top.
RAL 7035
12
Air conditioning
The air conditioning is a fitting solution for outdoor racks. It provides an ideal
working temperature for all the components inside the rack.
Depending on the environmental conditions, we have from 500W to 4000W
equipments.
You can choose between side and top mounted air.
We also o .ffer an exchanger for environments where temperature conditions
are freshener.
They do not need regular maintenance due to they do not have air filters. They
have a 35º internal thermostat.
All equipments are according to CE norm and R134a norm. HFC ecological gas.
CÓDIGO
Code
DESCRIPCIÓN
Description
EVE0400220
WALL MOUNTED AIR CONDIOTONER W500
EVE0800220
WALL MOUNTED AIR CONDIOTONER W850
EVE1008220
WALL MOUNTED AIR CONDIOTONER W900
EVE1100220
WALL MOUNTED AIR CONDIOTONER W1050
EVE1400220
WALL MOUNTED AIR CONDIOTONER W1400
EVE2000220
WALL MOUNTED AIR CONDIOTONER W2000
EVE2800220
WALL MOUNTED AIR CONDIOTONER W2700
EVE4100220
WALL MOUNTED AIR CONDIOTONER W4000
CÓDIGO
Code
DESCRIPCIÓN
Description
EHE04U0220
TOP MOUNTING AIR CONDITIONERS W500
EHE06S0220
TOP MOUNTING AIR CONDITIONERS W600
EHE09S0220
TOP MOUNTING AIR CONDITIONERS W900
EHE1400220
TOP MOUNTING AIR CONDITIONERS W1400
EHE2000220
TOP MOUNTING AIR CONDITIONERS W2000
EHE2800220
TOP MOUNTING AIR CONDITIONERS W2700
EHE4100220
TOP MOUNTING AIR CONDITIONERS W3800
Code
XVA50T0320
Description
AIR TO HEAT EXCHANGERS
13
CLUSTER
This is a new modular closer system to CPD rooms that
guarantees an important energy saving. This modular
system allows to rise the energetic efficiency due to the
optimization of the temperature to achieve a more direct
cooling.
Technical characteristics
• The frame is made of sheet steel. The upper panels are made of flame retardant polycarbonate to allow
a better lighting inside the modular system.
• The frame can be increase in length.
• The access to the modular system is by sliding doors to optimize the space.
• The interior corridor is 1.200 mm.
• The frame height is suitable to 42U and 47U racks.
• The assemble system is made in the same CPD room without necessity of turn off any equipment.
• We can offer personalized projects according to the client’s necessities
14
Solutions for energy efficiency cold / hot corridors
The upper covering is transparent to allow light and
provides access to the spaces lateral corridors containing
no equipment currently space provided for the future
installation of cooling elements or racks.
The roof is practicable to perform wiring tasks. To
access, have sliding doors.
Also controls the temperature of the input air cooling
and thus higher cooling capacities sensitive and older.
Increases the maximum cooling capacity of the cold
corridor solutions / hot everyday due to inefficiencies
minimizing recirculation failure.
It reduces the area to be cooled. The solution lies in
the direction of the air volume to the front of the
racks, where really needed and not the entire hall Data
Processing Center.
15
19” SUBRACK
This
system
is
printing
circuits,
suitable
to
to
assemble
the
assembly
of
cards
connectors
and
plaques,
and
etc.
You can contact to our commercial department for all configurations and
assemble possibilities.
According to our customer’s need, we can design personalized configurations depending on required
technical specifications.
16
Monitored PDU
Monitored PDU is built-in network interface and allows a manager to monitor PDU power consumption
from a remote interface.
Control Util para
Web o PDU
In-line Current Meter
MTV-3223C-01N1
MTH-1623K-08N1
MTV-3223C16N2
17
Monitored PDU
16Amp 230V/ 32Amp 230V
16Amp 230V
PDU06001
RMS Current Meter
Monitor Power: Total Power Monitoring by Meter, Web, SNMP, Free Bundle Software.
32Amp 230V
PDU060002
PDU060003
Protocols Http, Https, SNMP, DHCP, UDP.
Alert Umbral: User-Defined Alarm Threshold for Warning and Overload.
Event Alert Email, Trap, Audible Alarm.
Temp. / Humidity Option Accessory.
PDU06001
PDU060002
PDU060003
General
Output Input Protection (8) IEC 320 C13
(2) IEC 320 C19 (1) IEC320 C20 Inlet;
Enclosed IEC320 C19 to C19
Power Cord 3 Meters long
(1)16 AMP Circuit Breaker
(14) IEC 320 C13
(21) IEC 320 C13
(2) IEC 320 C19
(3) IEC 320 C19
(1) IEC320 C20 Inlet;
(1) IEC 320 309
Enclosed IEC320 C19 to C19 attached
Power Cord 3 Meters long
Power Cord 3 M long
(2) 16 AMP Circuit Breaker
(3)16AMP Circui Breaker
Communication
SSL DHCP Current Meter
Network
Temp/Humedad
PDU ID
Current Meter Range: Operación Resolution:
Precision: (1) Yellow LED
(1) Gren LED
(1) RJ45 Ethernet
3 Digits Meter
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
(1) Yellow LED
(1) Green LED
(2) Red LED
(1) RJ45 Ethernet
(1) RJ11 for ENV connection
1 Digits 7 Segment for PDU
3 Digits Meter
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
(1) Yellow LED
(1) Green LED
(3) Red LED
(1) RJ45 Ethernet
(1) RJ11 for ENV connect
1 Digits 7Segment for PDU
3 Digits Meter
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
230V
200V-240V full range
50/60HZ full range
230V
200V-240V full range
50/60HZ full range
32 Amp
32 Amp
0 ~ 40 Celsius degree
0% ~ 90%
56 x 1245 x 44 mm
4 kg
0 ~ 40 Celsius degree
0% ~ 90%
56 x 1778 x 44 mm
7 kg
Operation
Nominal 230V
Voltage 200V~ 240V full range
Frequency
50/60HZ full range
Max. Output 16 Amp
Temperature 0 ~ 40 C
Humidity
0% ~ 90%
Size
90 x 432 x 44 mm
Weight
2.5 kg
Regulatory Approvals CE, EN 55022 Class A,
EN 55024,
EN 61000-3-2,
EN 61000-3-3
FCC Part 15 Class A,
ICES-003.
18
SWITCHED PDU
Switched PDU is built-in network interface and allows an administrator to access the PDU from a remote
interface with it to turn on or off outlets and monitor its power load.
Control Util para
Web o PDU
Switched PDU
In-line Current Meter
SWH-1623K-02N1
SWH-1623K-08N1
SWV-1623K-16N1
SWV-3223C-24N3
19
SWITCHED PDU
16Amp 230V / 32Amp 230V
PDU060004 PDU060005
PDU060006
16Amp 230V
PDU060004
PDU060005
PDU060006
32Amp 230V
PDU060007
PDU060008
General
Output Input Enclosed
Power Cord
Protección
(8) IEC 320 C13
(14)IEC320 C13 (2) C19 (21)IEC320C13(3)C19 (14)IEC320C13(2)C19 (21)IEC320 C13(3)C19
(1) IEC320 C20 Inlet;
(1) IEC320 C20 Inlet;
(1) IEC320 309
(1) IEC320 C20 Inlet
IEC320 C19 to C19 C20
3 Meters long
3 Meters long
3 Meters long
(1)16AMP Circuit Breaker (1)16AMP Circuit Breaker (1)16AMP
(1) IEC320 309
3 Meters long
(2)16AMP
(1) IEC320 309
3 Meters long
(2)16AMP
Communication
(1) Yellow LED
(1) Yellow LED
SSL (1) Green LED
(1) Green LED
DHCP (8)
Green
LED
(16)Green LED
Output
(1) RJ45 Ethernet
(1) RJ45 Ethernet
Redes
3 Digits Meter RMS mtr 3 Digits Meter RMS
Current
Temp/Hum
Range: 0A ~ 20 A
0A ~ 20 A
Resolution: 0.1A
0.1A
+/-2%+/-0.1AMP
Precision:
+/-2%+/-0.1AMP
Operación
Operation
(1) Yellow LED
(1)Yellow LED
(1) Green LED
(1) Green LED
(2) Red LED
(24)Green LED
(1) RJ45 Ethernet (16)Green LED
3 Digits Meter RMS (1) RJ45 Ethernet
(1) RJ11 ENV
0A ~ 20 A
0A ~ 20 A
0.1A
0.1A
+/-2%+/-0.1AMP +/-2%+/-0.1AMP
Voltage Nom.
Voltage
Frequency
Max. Output
Temperature
Humidity
Sice
Weight
230V
230V
230V
200V~240V full range 200V-240V full range 200V~240V full range
50/60HZ full range 50/60HZ full range 50/60HZ full range
32 Amp
16Amp
32 Amp
0 ~ 40 C
0 ~ 40 C
0 ~ 40 C
0% ~ 90%
0% ~ 90%
0% ~ 90%
56x1245x44 mm
56x1245x44 mm
56x1778x44 mm
3 kg
4 kg
7 kg
230V
230V
200V~240V full range
200V~240V full range
50/60HZ full range
50/60HZ full range
16Amp(UL derated 12Amp) 16Amp
0 ~ 40 C
0 ~ 40 C
0% ~ 90%
0% ~ 90%
56 x 1245 x 44mm
90 x 432 x 44 mm
3 kg
3 kg
PDU060004
PDU060005
Regulatory Approvals Regulatory Approvals
UL 60950-1
CE
UL Listed
EN 55022 Class A
CSA, cUL Listed
EN 55024
CB by ULCE
EN 61000-3-2
EN 55022 Class A
EN 61000-3-3C-Tick AS/NZS
EN 55024
CISPR 22: 2006
EN 61000-3-2
EN 61000-3-3C-Tick AS/NZS
CISPR 22: 2006 (1) Yellow LED
(1) Green LED
(2) Red LED
(24)Green LED
(1) RJ45 Ethernet
(1) RJ11 ENV
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
PDU060006 / 060007 / 060008
Regulatory Approvals
CE
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3C-Tick AS/NZS
PDU060007
CISPR 22: 2006
PDU060008
FCC Part 15 Class A
ICES-003
Temp./Humidity RJ11
for ENV probe connection
20
SWITCHED PDU
11kW 16Amp / 22kW 32Amp 3 Phase
(3 Phase)
PDU060009
PDU060010
PDU060009
PDU060010
General
Output Input Enclosed
Protection
(2) IEC 320 C13
(3) IEC320 C20 Inlet; C19
(1) IEC320 C19 to
C19 C20 Power Cord 3 Meters long
(3)16 AMP Circuit Breaker
(18) IEC 320 C13
(6) IEC320 C20 Inlet; C19
(1) IEC320 309
C19 C20 Power Cord 3 Meters long
(6)16 AMP branch type breaker
(1)Yellow LED
(1)Green LED
(3)Red LED
(24)Green LED
(1)RJ45 for Ethernet
(1)RJ11 for ENV probe connection
1 Digits Seven Segments for PDU Identification
3 Digits Seven Segments for True RMS Meter
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
(1)Yellow LED
(1)Green LED
(6)Red LED
(24)Green LED
(1)RJ45 for Ethernet
(1)RJ11 for ENV probe connection
1 Digits 7Segments for PDU Ident.
3 Digits 7Segments True RMS Meter
0A ~ 20 A
0.1A
+/-2%+/-0.1AMP
Communication
SSL DHCP Circuit
Output
Network
Temp./Hum.
PDU ID
Current Range: n Resolución:
Precision: Operació
Operation
Voltage Nom. Voltage Frequency Load Capacity Max. Output Max. OutPut Outlet Max. OutPut Bank Temperature
Humidity
Sice
Weight
400V AC, 3-Phase 3P+N+PE
230V
50/60HZ full range
11.1 kVA
32 Amp
IEC 320 C13: 10A / IEC 320 C19: 16A
16Amp
0 ~ 40 C
0% ~ 90%
56 x 1778 x 80 mm
10 kg
400V AC, 3-Phase 3P+N+PE
230V
50/60HZ full range
22 kVA
32 Amp
IEC 320 C13: 10A / IEC 320 C19: 16A
16Amp
0 ~ 40 C
0% ~ 90%
56 x 1778 x 80 mm
10 kg
Regulatory Approvals
CE
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3 21
ATS
ATS has dual input power cords supplying
power to the connected load. If the primary
power source becomes unavailable, it will
seamlessly switch power to the secondary
source without interrupting critical loads.
22
ATS
PDU060011
PDU060011
General
Output Input
(1)IEC 309 32A 2P+E receptacle, 0.9 meters
(2)attached IEC309 32A 2P+E plugs, 3 meters
Communication
SSL DHCP Circuit
Output
Input
Network
Temp./Humidity
PDU ID
Current
(1) Yellow LED
(1) Green LED
(2) Red LED
(2) Green LED
(2) Green LED
(1) RJ45 for Ethernet
(1) RJ11 for ENV probe connection
1 Digits Seven Segments for PDU Identification
3 Digits Seven Segments for True RMS Meter
n
Power Information
Voltage +/- 2% @ 90V~260V
Operació
Active Power +/- 2% @ 50W~5000W
Apparent Power
+/- 2% @ 50VA~5000VA
Frequency
+/- 2% @ 45~65Hz
Power Factor
+/- 0.02 @ 0.5~1.0
kWh Range: 0.001kWh ~ 99999.999kWh
Precision: +/-2% @ 50W~5000W, kh=1.0
Current Range: 0A ~ 32 A
Resolution: 0.1A
Precision: +/-2%+/-0.1AMP
Operation
Nominal Voltage
On-Line Voltage
Frequency
Max. Output
Transfer Time
Operation Temp.
Sice
Net Weight
200V ~240V
180V~ 262V
50/60Hz
32 Amp
8~16ms
0 ~ 40 C
260 x 432 x 44.45 mm
7 kg
Regulatory Approvals
CE / EN 55022 Class A
EN 55024 /EN 61000-3-2
EN 61000-3-3 / FCC Part 15
Class A, ICES-003 23
ATS
PDU060012
PDU060012
General
Output (1) Terminal Block
Input(2)Terminal Block
Communication
SSL DHCP Output
Input
Network
Temp./Humidity PDU ID
Current (1) Yellow LED
(1) Green LED
(2) Green LED
(2) Green LED
(1) RJ45 for Ethernet
(1) RJ11 for ENV probe connection
1 Digits Seven Segments for PDU Identification
3 Digits Seven Segments for True RMS Meter
n
Power Information
Voltage +/- 2% @ 90V~260V
Operació
Active
Power +/- 2% @ 50W~5000W
Apparent Power
+/- 2% @ 50VA~5000VA
Frequency
+/- 2% @ 45~65Hz
Power Factor
+/- 0.02 @ 0.5~1.0
kWh Range: 0.001kWh ~ 99999.999kWh
Precision: +/-2% @ 50W~5000W, kh=1.0
Current Range: 0A ~ 32 A
Resolution: 0.1A
Precision: +/-2%+/-0.1AMP
Operation
Nominal Voltage
200V ~240V
On-Line Voltage
180V~ 262V
Frequency 50/60Hz
Max. Output
32 Amp
Transfer Time
8~16ms
Operation Temp.
0 ~ 40 C
Humidity
0% ~ 90%
Sice
260 x 432 x 44.45 mm
Weight5 kg
Regulatory Approvals
CE / EN 55022 Class A
EN 55024 /EN 61000-3-2
EN 61000-3-3 / FCC Part 15
Class A, ICES-003 24
Central Management Software
Graphic Monitoring Interface
PDU Summary Report
PDU Event Log
All PDU Status Information
Advantages
Profitability
Adapted to fit.
Management software free
Feed information accurately
The remote power.
Several models.
25
DATA PDU Y ATS
*Capacity for 30/32Amp
26
FURNITURE
This new range is suitable to organize and satisfy all
requirements in work places.
New technologies and internet have revolutionized the worldwide communications. but our offices have
not done at the same rapidity.
27
FURNITURE
This product range allows mobility, flexibility
and organization in working environments which
allows the integration of all equipments and
services.
Un producto ergonómico ideal para los entornos de trabajo más exigentes.
El sistema cumple con los requisitos estéticos y funcionales que la instalación final requiere.
28
ELM
Access control and manage parameters, ELM
System:
The ELM system has two possible configurations:
Stand Alone version
This system allows the access control with
electronic handles.
ELM Network
With this system, we can control all the serial
cabinets, manage the state and the access by
software through IP. This model also contemplates
the possibility to manage parameters as smoke,
temperature, humidity, opening doors, … and
to create alarms through mobile messages or
e-mails.
1. Access possibilities:
NUMERIC KEYBOARD
It allows to select the handle to open and enter the access
code.
PERSONALIZED MAGNETIC CARD
It can be configurable on date or on access numbers.
SMS
Remote access through mobile message.
REMOTE CONTROL
It is available only in AGENTE model (memory handle).
2.Electronic
handles
and
other
possibilities:
The handles have a network contact that informs about the state (open/close) and a locking system
module to open the handle. We can differentiate in two groups:
ELECTRONIC HANDLES
Electronic handles: last versions add the possibility to open
it mechanically in case the power failure. There are specific
models anti vandalism to work outside. The AGENTE version
stores internally all access. internement tous les accès.
HIDDED ELECTRONIC LOCKS
Hidden electronic locks: they are also known as hook closure.
They can not be visible from outside. The rest state is NC
(Normally Closed). The standard version supports 100 kg. Other
models with motor drive support 400 kg.
29
ELM
3. Installations and extensions:
Most of projects are personalized and are supplied with configuration to make an installation plug & play.
Nearly all ELM accessories have three supplied possibilities.
19” ENCAPSULATED VERSION:
All control modules, sensors, etc. are supplied
to connect to 3000-u49 19” rack.
BOX VERSION:
It is used to make extensions. It is connectable
through 2x RJ45 crossed cables
KIT VERSION:
This is supplied separated and the customer
makes the connection.
4.Manage, sensors and alarms:
ELM system has a free software to
configure the access system and manage
parameters.
The
software
stores
movements and states that system obtains.
There is the possibility to purchase the ELM
Watcher software with which one we can
send change state alarms by e-mail o mobile
message.
The ELM Network has the possibility to control
many parameters inside the cabinet.
Voltage sensor
Stolen block sensor
Temperature and humidity sensor
Relevant information:
• Standard communication protocol SNMP.
• Standard cables length 3m.
30
•
•
•
•
Smoke sensor
Ease certification according to DIN ISO 17799 IT SECURITY
Sealing from IP40 to IP65.
Handle material: Zamak or PA GF 30%.
Mechanical closing elements should be tested for each cabinet or project.
ACCESSORIES
31
ACCESSORIES
MAGNET BOX
Box with DIN 35 rail for equipments installation
according to DIN 43 880 norm for installations of
mounting plugs, protection switches high power,
etc.
CODE
ES000113M
DESCRIPTION
AGNET BOX 3U 19”
COVERS AND MODULES
Modular’s cover system with ventilation. It can be
fitted either on the top or on the bottom of the
cabinet.
We offer steel and vented covers and brushes
modules which allow cable entry.
All covers can be raised 20 mm through a spacer kit
to increase air output.
RAL 7035
1
RAL 9005
DIMEN. WxD
CODE
DESCRIPTION
DIMEN. WxD
CODE
DESCRIPTION
DR080242
BRUSH COVER 450X200
450X200
IR020225
BRUSH COVER
450X200
450X200
DR080243
BRUSH COVER 650X200
650X200
IR020226
BRUSH COVER
650X200
650X200
DR080247
STEEL COVERD OMOS 450X50
450X50
IR020218
STEEL COVER IDARK 450X50
450X50
DR080248
STEEL COVER DOMOS 450X200
450X200
IR020219
STEEL COVER IDARK 450X200
450X200
DR080249
STEEL COVER DOMOS 450X450
450X450
IR020220
STEEL COVER IDARK 450X450
450X450
DR080250
STEEL COVER DOMOS 450X650
450X650
IR020221
STEEL COVER IDARK 450X650
450X650
DR080244
VENTED COVER DOMOS 450X200
450X200
IR020222
VENTED COVER IDARK 450X200
450X200
DR080252
VENTED COVER DOMOS 450X450
450X450
IR020223
VENTED COVER IDARK 450X450
450X450
DR080253
VENTED COVER DOMOS 450X650
450X650
IR020224
VENTED COVER IDARK 450X650
450X650
ACCESSORIES
SIMPLES DOORS
RAL 7035
CODE
DESCRIPTION
DR080173
GLASS DOOR DOMOS 15U 600
DR080174
GLASS DOOR DOMOS 15U 800
DR080175
GLASS DOOR DOMOS 24U 600
DR080176
GLASS DOOR DOMOS 24U 800
DR080177
GLASS DOOR DOMOS 33U 600
DR080178
GLASS DOOR DOMOS 33U 800
DR080179
GLASS DOOR DOMOS 38U 600
DR080180
GLASS DOOR DOMOS 38U 800
DR080181
GLASS DOOR DOMOS 42U 600
DR080182
GLASS DOOR DOMOS 42U 800
DR080183
GLASS DOOR DOMOS 47U 600
DR080184
GLASS DOOR DOMOS 47U 800
RAL 9005
CODE
DESCRIPTION
IR020127
GLASS DOOR IDARK 24U 600
IR020128
GLASS DOOR IDARK 24U 800
IR020129
GLASS DOOR IDARK 42U 600
IR020130
GLASS DOOR IDARK 42U 800
IR020131
GLASS DOOR IDARK 47U 600
IR020132
GLASS DOOR IDARK 47U 800
RAL 7035
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
DR080142
STEEL DOOR DOMOS 15U 600
DR080161
VENTED DOOR DOMOS 15U 600
DR080143
STEEL DOOR DOMOS 15U 800
DR080162
VENTED DOOR DOMOS 15U 800
DR080144
STEEL DOOR DOMOS 24U 600
DR080163
VENTED DOOR DOMOS 24U 600
DR080145
STEEL DOOR DOMOS 24U 800
DR080164
VENTED DOOR DOMOS 24U 800
DR080146
STEEL DOOR DOMOS 33U 600
DR080165
VENTED DOOR DOMOS 33U 600
DR080147
STEEL DOOR DOMOS 33U 800
DR080166
VENTED DOOR DOMOS 33U 800
DR080148
STEEL DOOR DOMOS 38U 600
DR080167
VENTED DOOR DOMOS 38U 600
DR080149
STEEL DOOR DOMOS 38U 800
DR080168
VENTED DOOR DOMOS 38U 800
DR080150
STEEL DOOR DOMOS 42U 600
DR080169
VENTED DOOR DOMOS 42U 600
DR080151
STEEL DOOR DOMOS 42U 800
DR080170
VENTED DOOR DOMOS 42U 800
DR080152
STEEL DOOR DOMOS 47U 600
DR080171
VENTED DOOR DOMOS 47U 600
DR080153
STEEL DOOR DOMOS 47U 800
DR080172
VENTED DOOR DOMOS 47U 800
RAL 9005
RAL 9005
CODE
DESCRIPTION
CODE
DESCRIPTION
IR020145
VENTED DOOR IDARK 24U 600
IR020133
STEEL DOOR IDARK 24U 600
IR020146
VENTED DOOR IDARK 24U 800
IR020134
STEEL DOOR IDARK 24U 800
IR020147
VENTED DOOR IDARK 42U 600
IR020135
STEEL DOOR IDARK 42U 600
IR020148
VENTED DOOR IDARK 42U 800
IR020136
STEEL DOOR IDARK 42U 800
IR020149
VENTED DOOR IDARK 47U 600
IR020137
STEEL DOOR IDARK 47U 600
IR020150
VENTED DOOR IDARK 47U 800
IR020138
STEEL DOOR IDARK 47U 800
2
ACCESSORIES
DOUBLE DOORS
RAL 7035
CODE
DESCRIPTION
DR080154
DOUBLE VENTED DOOR DOMOS 42U 800
DR080155
DOUBLE VENTED DOOR DOMOS 47U 800
RAL 9005
CODE
DESCRIPTION
IR020172
DOUBLE VENTED IDARK 24U 800
IR020244
DOUBLE VENTED IDARK 42U 600
IR020173
DOUBLE VENTED IDARK 42U 800
IR020174
DOUBLE VENTED IDARK 47U 800
RAL 7035
CODE
DESCRIPTION
DR080156
DOUBLE STEEL DOOR DOMOS 24U 800
DR080157
DOUBLE STEEL DOOR DOMOS 42U 800
DR080158
DOUBLE STEEL DOOR DOMOS 47U 800
RAL 9005
CODE
DESCRIPTION
IR020175
DOUBLE STEEL DOOR IDARK 24U 800
IR020176
DOUBLE STEEL DOOR IDARK 42U 800
IR020177
DOUBLE STEEL DOOR IDARK 47U 800
RAL 7035
CODE
DESCRIPTION
DR080159
DOUBLE GLASS DOOR DOMOS 42U 800
DR080160
DOUBLE GLASS DOOR DOMOS 47U 800
RAL 9005
3
CODE
DESCRIPTION
IR020169
DOUBLE GLASS DOOR IDARK 24U 800
IR020243
DOUBLE GLASS DOOR IDARK 42U 600
IR020170
DOUBLE GLASS DOOR IDARK 42U 800
IR020171
DOUBLE GLASS DOOR IDARK 47U 800
ACCESSORIES
FRONTAL SHELF 19”
It occupies 2U height and it is
suitable to support light equipment.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
DR080256
FRONTAL SHELF DOMOS 2U 19” F300
IR020227
FRONTAL SHELF IDARK 2U 19” F300
DR080257
FRONTAL SHELF DOMOS 2U 19” F400
IR020228
FRONTAL SHELF IDARK 2U 19” F400
SIMPLE SHELF 50kg y 100kg
Quickly install shelf. It can be mounted
at any position of 19” mounts.
It can be regulated every 25 mm.
Load rating of 50 and 100 kg.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
DR080238
SIMPLE SHELF DOMOS 19” 460
IR020234
SIMPLE SHELF IDARK 19” 460
DR080239
SIMPLE SHELF DOMOS 19” 660
IR020235
SIMPLE SHELF IDARK 19” 660
TELESCOPIC SHELF
It has to be mounted directly
to the frame of the rack
cabinet. It allows maximizing
the space in the rack cabinet.
It includes telescopic guides.
Load rating of 125 kg.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
CO000205
TELESCOPIC SHELF DOMOS 19” 460 SIM
CO000378
TELESCOPIC SHELF IDARK 19” 460 SIM
CO0002
11
TELESCOPIC SHELF DOMOS 19” 660 SIM
CO000379
TELESCOPIC SHELF IDARK 19” 660 SIM
4
ACCESSORIES
KEYBOARD SHELF
A removable shelf with a capacity of 20 kg
loading rate. It is supplied with telescopic
guides incorporated and 19” mounts
adaptors.
RAL 7035
CODE
DESCRIPTION
CO000365
KEYBOARD SHELF DOMOS 19” 1U 400 DEPTH
19” DRAWER
It is designed to keep safe documents or tools. It
is supplied with telescopic guides and 19” mounts
adaptors.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
CO000432
19” DRAWER DOMOS 3U
CO000434
19” DRAWER IDARK 3U
CO000433
19” DRAWER DOMOS 4U
CO000435
19” DRAWER IDARK 4U
PLINTH
The plinth helps to the cabling access by
the bottom of the rack.
It has dismantled sides and it allows
adding castors or adjustable feet.
RAL 7035
5
CODE
DESCRIPTION
DR080202
PLINTH DOMOS 600X600
DR080203
PLINTH DOMOS 600X800
CODE
DESCRIPTION
DR080207
PLINTH DOMOS 600X900
IR020195
PLINTH IDARK 600X600
DR080206
PLINTH DOMOS 600X1000
IR020196
PLINTH IDARK 600X800
DR080204
PLINTH DOMOS 800X600
IR020197
PLINTH IDARK 600X1000
DR080205
PLINTH DOMOS 800X800
IR020198
PLINTH IDARK 800X600
DR080209
PLINTH DOMOS 800X900
IR020199
PLINTH IDARK 800X800
DR080208
PLINTH DOMOS 800X1000
IR020200
PLINTH IDARK 800X1000
RAL 9005
ACCESSORIES
19” FRONT PANELS
ANODISE
19 inches steel or vented panels to be fitted on the
rack.
CODE
DESCRIPTION
DR080219
19” 1U FRONT ANODISE PANEL
DR080220
19” 2U FRONT ANODISE PANEL
DR080221
19” 3U FRONT ANODISE PANEL
DR080222
19” 4U FRONT ANODISE PANEL
DR080223
19” 5U FRONT ANODISE PANEL
DR080224
19” 6U FRONT ANODISE PANEL
DR080225
19” 7U FRONT ANODISE PANEL
CODE
DESCRIPTION
DR080226
19” 8U FRONT ANODISE PANEL
IR020202
19” 1U FRONT PANEL IDARK
DR080227
19” 9U FRONT ANODISE PANEL
IR020203
19” 2U FRONT PANEL IDARK
DR080228
19” 10U FRONT ANODISE PANEL
IR020204
19” 3U FRONT PANEL IDARK
DR080229
19” 11U FRONT ANODISE PANEL
IR020205
19” 4U FRONT PANEL IDARK
DR080230
19” 12U FRONT ANODISE PANEL
IR020206
19” 5U FRONT PANEL IDARK
DR080232
19” 1U FRONT VENTED ANODISE PANEL
IR020207
19” 6U FRONT PANEL IDARK
DR080233
19” 2U FRONT VENTED ANODISE PANEL
IR020208
19” 1U FRONT VENTED PANEL IDARK
DR080234
19” 3U FRONT VENTED ANODISE PANEL
IR020209
19” 3U FRONT VENTED PANEL IDARK
RAL 9005
CABLE HOOP
It organizes cabling from patch panels to inside the
rack.
It’s directly installed to the mounts.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
IR020216
CABLE HOOP IDARK 600
DR080259
CABLE HOOP DOMOS 800
IR020217
CABLE HOOP IDARK 800
6
ACCESSORIES
VERTICAL CABLE TRAY
It allows organizing and guiding the cable from the bottom or the
top of the rack.
The surface is multi-perforated and it is directly fitted on the
supports mounts.
RAL 7035
CODE
DESCRIPTION
DR080064
VERTICAL CABLE TRAY DOMOS 15U 135MM
DR080065
VERTICAL CABLE TRAY DOMOS 15U 225MM
DR080066
VERTICAL CABLE TRAY DOMOS 24U 135MM
DR080067
VERTICAL CABLE TRAY DOMOS 24U 225MM
DR080068
VERTICAL CABLE TRAY DOMOS 33U 135MM
DR080069
VERTICAL CABLE TRAY DOMOS 33U 225MM
DR080070
VERTICAL CABLE TRAY DOMOS 38U 135MM
DR080071
VERTICAL CABLE TRAY DOMOS 38U 225MM
DR080072
VERTICAL CABLE TRAY DOMOS 42U 135MM
CODE
DR080073
VERTICAL CABLE TRAY DOMOS 42U 225MM
IR020229
VERTICAL CABLE TRAY IDARK 24U 135MM
DR080074
VERTICAL CABLE TRAY DOMOS 47U 135MM
IR020230
VERTICAL CABLE TRAY IDARK 42U 135MM
DR080075
VERTICAL CABLE TRAY DOMOS 47U 225MM
IR020231
VERTICAL CABLE TRAY IDARK 47U 135MM
RAL 9005
DESCRIPTION
SIMPLE GUIDE
Easy assembly guide system on 19” mounts.
There are availabilities of 2 depths.
7
CODE
DESCRIPTION
CO000027
GUIDE SIMPLE 32/50 F600 (PAR)
CO000028
GUIDE SIMPLE 32/50 F800 (PAR)
ACCESSORIES
19” BRUSH PANEL
This panel includes a rubber to protect cables against friction damage. It allows cable entry to the interior
or exterior of the rack.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPCIÓN
DR080213
1U BRUSH PANEL DOMOS
DR080241
1U BRUSH PANEL IDARK
19” RINGS CABLE MANAGEMENT PANEL
1U panel what includes metal rings to help to the
correct organization of the horizontal cabling.
RAL 9005
RAL 7035
CODE
DESCRIPTION
CODE
DESCRIPTION
ES000425
19” RINGS CABLE MANAGEMENT PANEL DOMOS
ES001436
19” RINGS CABLE MANAGEMENT PANEL IDARK
19” CABLE MANAGEMENT PANEL WITH COVER
1U and 2U panels which include a fast closing cover to help to the correct organization of
the horizontal cabling..
RAL 9005
RAL 7035
CODE
DESCRIPTION
DR080245 1U CABLE MANAGEMENT PANEL WITH COVER SDOMO
IR020214
1U CABLE MANAGEMENT PANEL WITH COVER IDARK
DR080246 2U CABLE MANAGEMENT PANEL WITH COVER SDOMO
IR020215
2U CABLE MANAGEMENT PANEL WITH COVER IDARK
CODE
DESCRIPTION
8
ACCESSORIES
2 SPEED TURBINE
The Turbine extracts the accumulated air in the rack
produced by installed equipments. It is mounted on
top of the rack, directly on the frame.
It is necessary to add a vented cover which allows air exit.
The original flow is 900m3/h.
It can be standardized approximately 400 m3/h
depending on the cable position.
RAL 7035
CODE
DESCRIPTION
DR080260
2 SPEED TURBINE WHICH THERMOSTAT
19” 1U FAN UNIT
Fan assembled for 19” electronic racks.
Technical Details
Connectión:
Appliance power inlet on rear of casing, plug included
Axial fans, ball bearing:Service life 50,000h at +25°C (+77°F), 65% RH
Degré de protection
IP20
Material:
Front panel aluminium, bright anodise.
CODE
9
DESCRIPTION
UNIDAD VENT.T
It improved
ventilation.
natural
convection
by
forced
Optional 3, 6 or 9 fans with thermostat added.
ENSION
DEBITP
OWER
EMISSION
ACOUSTIC
ROTATION SPEED
PRESSURE
STATIC
WEIGHT
ES001403 With Thermostat3
3
AC230v50Hz
486m3/h
45W
55db
2600min-1(50Hz)
74Pa
3,4Kg
ES000801 With Thermostat6
6
AC230v50Hz
972m3/h
90W
57db
2600min-1(50Hz)
74Pa
5,7Kg
ES000485 With Thermostat9
9
AC230V50Hz
1458m3/h
135W
58db
2600min-1(50Hz)
74Pa
7,9Kg
ACCESSORIES
FAN UNIT
It has to be mounted on the top of the rack cabinet, directly to the frame. It is necessary to add a vented
cover. It includes a thermostat to regulate temperature.
RAL 7035
CODE
DESCRIPTION
CO000136 2 FAN UNIT DOMOS
CO000137 4 FAN UNIT DOMOS
RAL 9005
CODE
DESCRIPTION
CO000437 2 FAN UNIT OUTDOOR
CO000423 2 FAN UNIT IDARK
CO000438 4 FAN UNIT OUTDOOR
CO000424 4 FAN UNIT IDARK
THERMOSTAT
It’s a small size and simple installation
thermostat. It is to regulate temperatures
inside the rack.
Technical Details
Alimentation:
AC250V 6A / DC 30W
Sensor
Thermostatic bimetal
: element:
CEM:
EN 50082, EN 55014 EN 60555
Class de protection: Tension de controll 1600V
Fixation:
Clip de 35mm DIN, EN 50022
CODE
DESCRIPTION
DR080255
THERMOSTAT
0-60ºC
10
ACCESSORIES
FILTER FANS
Filter fans are used to provide an optimum climate in enclosures.
The interior temperature of an enclosure can be reduced by
channeling cooler filtered outside air into the enclosure thus
expelling heated internal air.
The resulting air flow prevents formation of localized hot pockets
and protects the electronic components from overheating.
The high-performance axial fan provides high air circulation. The
plastic used for the hood of this filter fan series is highly weather
proof and UV light resistant.
Technical data
Connection:
3-pole clamp for 2.5mm².
Axial fan, ball bearing:
service life 50 000h at 25°C (77°F).
Filter mat:
G4 acc. to DIN EN 779, filtering degree 94%.
Protection type/Protection class: IP55 / I (earthed).
Filter material:
synthetic fiber with progressive construction, temperature
resistant to 100°C, self-extinguishing class F1; moisture
resistant to 100% RH.
Hood (filter fan and exit filter): Plastic according to UL94 V-0, light grey.
Fans filter Série FF 018 PLAT; 550M3/h
CODE
ES001430
VOLTAGE
POWER
SPEED
FREE AIR
SPEED
FILTER
OUTPUT
AC 230 V,
50Hz
550m3/h
300m3/h
ABSORPTION ABSORPTION MIDDLE LEVEL
DEPTH
WEIGHT HOMOLOGATIONS
CURRENT
POWER
PRESSURE
INCORPORATION
ACOUSTIC
300mA
64W
65dB
107
2,7Kg
UL –File No.
E234324
Filter output Standard EF 118-250X250M
M
CODE
DEPTH OF INCORPORATIO
N
ES001236
22 mm.
CUTTING
INSTALLATION
250 x 250mm x 0,4 1
WEIGHT
Kg.
FILTER
DEGREE OF PROTECTION
G4 DIN EN 779, grade
filtration 94%
IP54
Roof Filter Fan RFP 018 Series
Low-noise level roof filter fan are used to drive out
warm air from within the enclosure from within the
enclosure which has been generated by the stray
power of components.
High air grew. To exchange the filter mat the hood
can be easily opened without tools.
Technical data
Connection:
3-pole clamp for 2.5mm².
Axial fan, ball bearing: service life 50 000h at 25°C /77°F (65% RH).
Filter mat:
G3 acc. to DIN EN 779, filtering degree 85%.
Protection type/ Protection class: IP43.
Filter material:
synthetic fiber, temperature resistant to 100°C,
moisture resistant to 100% RH.
CODE
ES001254
ES001230
11
DESCRIPTION
VOLTAGE
POWER
SPEED
FREE AIR
VOLUME
FILTER G3
DEPTH
ABSORPTION LEVEL
CUTTING
CURRENT PRESSURE INCORPORATION INSTALLATION WEIGHT
ACOUSTIC
Fans p lafond
AC 230 V,
220V 4 VEN T.
50Hz
400m3/h
300m3/h
68W
55dB
52mm
250x250mm
+0,4
3,3Kg
Fans p lafond
AC 230 V,
650m3/h
500m3/h
64W
67dB
107mm
250x250mm
2,6Kg
RFP018
230 VAC
50Hz
+0,4
ACCESSORIES
FAN HEATERS
Fan heater prevents formation of condensation and provides an
evenly distributed interior air temperature in enclosures with
electric/electronic components.
The heater is connected using the internal terminal connectors.
The small size of the CS/CSL 028 makes it ideal for use in enclosures
where space is at a premium.
Technical data
.
Connection:
2-pole clamp max. 2.5mm² with strain relied.
Axial fan, ball bearing: air flow, free flow: CS 028: 13.8m³/h CSL 028: 45m³/h
(230VAC), 54m³/h (120VAC) service life 40,000h at 40°C (104°F)
Heating element:
PTC heating element.
Surface temperature: 250W: max. 50°C ; 400W: max. 65°C; except upper
protective grille.
Protection type:
IP20 / II (double insulated).
Operating / Storage t emperature: -45 to +70°C.
Casing:
plastic according to UL94-0, black.
Mounting:
clip for 35 mm DIN rail, EN 60715 or screw fixing.
CODE
VOLTAGE
POWER
POWER
HEATING
CURRENT
DIMENSIONS
MOUTING
HOMOLOGATIONS
CONNECTION
ES001251
AC230 V, 50/60Hz
250W
9A
111x85x90mm
Par clip
VDE+U L File No. E150057
ES001405
AC230 V, 50/60Hz
400W
15A
111x85x90mm
Par clip
VDE+U L File No. E150057
ELECTRONIC HYGROTHERM
Electronic hygrotherm controls the ambient temperature and
relative humidity in an enclosure with electric/electronic
components, and turns on a heater (or alternatively, a fan) at
either set point, helping prevent the formation of condensation
in the enclosure.
Technical data
Connection:
5-pole terminal, clamping torque 0.5Nm max.:
rigid wire 2.5mm², stranded wire
(with wire end ferrule) 1.5mm².
Service life:
NC: 50,000 cycles; NO: 100,000 cycles
Switch difference (temperature): 2K (± 1K tolerance) at 25°C/77°F (50% RH)
Switch
difference
4% RH (± 1% tolerance) at 25°C/77°F (50% RH)
Datos
técnicos (humidity):
Reaction time (humidity):
5 sec.
Max. Switching capacity
(Relay output):
NO: 240VAC, 8 (1.6) A; NC: 120VAC, 6 (1) A; NO:
120VAC, 8 (1.6) A 24VDC, 4ª
Mounting:
clip for 35mm DIN rail,EN60715
Dimensions:
77 x 60 x 43mm
CEM: According to
EN55014-1-2, EN 61000-3-2, EN61000-3-3
Protection type:
IP20
Operating temperature:
0 to +60°C
CODE
ES001407
DESCRIPTION
VOLTAGE
POWER
Electronic Hygrotherm
AC 230 V, 50/60 Hz
TEMPERATURE
ADJUSTING
0 a 60ºC
HUMIDITERANG SETTING
50 a 90% RH
HOMOLOGATIONS
VDE+U L File No. E164102
12
ACCESSORIES
DOOR SWITCH KIT
Easily assembly kit which allows connecting and
disconnecting lighting and cooling systems inside
the rack, or controlling doors.
It includes a support to fix to the frame.
CODE
DESCRIPTION
DR080107
DOOR SWITCH KIT DOMOS
MAGNETIC COMPACT LAMP
The flat slim line lamp SL 025 is suitable for all
types of panels and enclosures, especially where
space is at a premium. The lamp can be mounted
on its narrow or broad surface using screws.
Technical Details
Alimentation: AC230V 50H
Watts:
11W (equals 75W light bulb)
Protection type/ Protection class: IP20
Fixaction:
Magnets
It is also available with a magnet which allows it to
be fitted quickly in any position in a steel enclosure.
Both versions are available with an integrated
electrical socket enabling the. use of additional
appliances.
CODE
DESCRIPTION
ES001404
COMPACT MAGNET LAMP
025 LED LAMP
The lamp series LED 025 is suitable for all types
of panels and enclosures, especially where space
is at a premium.
The lamps have a very long service life thanks to
the use of LED technology.
Technical Details
Watts:
Connection:
Protection type/
Operating/Storage
Fixation:
13
11W (=75 lampe incandescente)
CA: max. 2,5 A / CA 240 V, color: white
CD: max. 2,5 A / CD 60 V, ccolor: blue
Protection class: IP20
temperature:
60.000 h a 20 °C (68 ºF))
Fixation magnétique ou fixation par vis M5.
They are available with powerful non-slip rubberized
magnets allowing them to be quickly positioned in
any steel enclosure. Alternatively they can be fixed
mechanically.
The power output allows up to 10 lamps to be
connected to each other. Both the power input
and output connectors snap lock into their sockets.
With the integrated power unit and the plugs the
lamp can quickly be connected.
CODE
DESCRIPTION
ES001231
LED 025 100-240 VAC SWITCH MAGNET FIXING
ES001253
CONNECTION CA LED
ACCESSORIES
SECURITY LOCKS
Electronic combination locks made for Idark range.
It allows increasing the security level through closed systems with password in electronic and mechanical
systems.
CODE
DESCRIPTION
IR020237
1 DOOR SECURITY LOCK
IR020238
2 DOORS SECURITY LOCK
IR020239
MECHANICAL AND
KEY COMBINATION SECURITY LOCK
RAL 9005
BAYING KIT
This kit allows joining 2 racks with the same depth.
The joint is made between sides.
The kit is composed of 4 pieces to mount on the
structural columns of the rack.
ZINCADO
CODE
DESCRIPTION
DR080251
BAYING KIT
14
ACCESSORIES
EARTH CONTINUITY KIT
It allows electrical continuity between all parts of
the rack.
CODE
DESCRIPTION
ES000234
EARTHING BAR
DR080262
INSULATOR
DR080210
EARTH CONTINUITY KIT
IEC CABLE
3 meters IEC cables to supply energy to ventilation
units.
CODE
DESCRIPTION
DR080254
IEC CABLE + 3M SCHUKO
ES001010
IEC CABLE + 3M
SOCKET STRIPS
1U socket strips with 16A Schuko base, with or
without switch. It includes 2m cable.
15
CODE
DESCRIPTION
REN05006
SOCKET STRIPS 6 SCHUKO
REN05008
SOCKET STRIPS 8 SCHUKO
REN05009
SOCKET STRIPS 9 SCHUKO
REN5006I
SOCKET STRIPS 6 BASES WITH SWITCH
REN5008I
SOCKET STRIPS 8 BASES WITH SWITCH
REN5006M
SOCKET STRIPS6 BASES WITH MAGNET
ACCESSORIES
BOLTING DOWN CLAMP KIT
This kit subjects to adjustable feet what allows
fixing the rack on the floor.
RAL 9005
CODE
DESCRIPTION
IR020201
BOLTING DOWN CLAMP KIT
CASTORS
Castors can make easily the movement of the rack.
CODE
DESCRIPTION
DR080240
CASTOR
DR080258
CASTOR WITH BRAKE
ASSEMBLY GROUP AND CAGED
NUT
CAGE NUT
To insert in laterals holes on the mounts.
ASSEMBLY GROUP:
Hardware kit for assembling equipments.
CODE
DESCRIPTION
ES000262
M6 CAGE NUT
CO000044
ASSEMBLY GROUP
M10 LIFTING EYE
It is fitted on the top of the rack directly to the
frame.
ZINCADO
CODE
DESCRIPTION
DR080231
M10 LIFTING EYE
ES000811
M10 LIFTING EYE
ES000634
M10 LIFTING EYE
16
DESIGNS
Creation and adaptation of our products, to comply with all the plans and systems
that the customer requires.
PREPARED FOR FUNCTION
All our RACKS, enveloping, clusters etc. are presented with all electrical and
electronic components for full function.
SOLUTIONS
Product value is enhanced as the lack of problems, ensuring their security installation
and construction materials very appropriate in quality and price.
You can view all our news and online
Soimer Telecomunicacions
en www.soimer.com
You can also find us on
social networks
Soimer Telecomunicacions S.L.
P.I. Les Gavarreres U.A.
Sant Pere, 8 bloc 1 Nave 8 - 08711 Ódena (Barcelona)
T. 93 806 86 61 - F. 93 804 08 19 [email protected]