docFenders
download 
Report Transcription
Fenders
Fenders • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-01 • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories KJC Signature Series Fenders Kustomwerks and Kendall Johnson Customs have teamed up to offer a KJC Signature Series of fenders. Kendall Johnson, one of the most widely recognized custom builders in the industry today, put his own signature of style on these fenders. KJC signature fenders offer all of the same great features as the WILD CARD brand of fenders offered by KUSTOMWERKS, but Kendall Johnson has developed his own style of trim for these fenders. KJC fenders are offered in Softail-style rear fenders, Rigid Rear fenders and front fenders in various widths. This signature series of fenders has the same great radius, phosphate etched to prevent rusting before painting, 14 gauge one-piece construction to prevent splitting or cracking from vibration as our Wild Card fenders. The Kendall Johnson Signature Series fenders are offered exclusively by KENDALL JOHNSON CUSTOMS and KUSTOMWERKS Front Fenders Softail Rear Fenders Rigid Rear Fenders 11421 11428 SOLD EACH 11424 SOLD EACH 11429 SOLD EACH 11425 SOLD EACH 11430 SOLD EACH 11426 SOLD EACH 11431 SOLD EACH 11427 SOLD EACH • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.25” wide and 42.30” long. 11422 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.75” wide and 42.30” long. • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-02 11423 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 5.50” wide and 42.30” long. Kendall Johnson designed signature series Heavy duty front fenders made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. KJC 9.00” Softail rear fender. Fits Softail style frames using up to 200mm wide rear tires. Fender is 9.00” wide and 31.50” long. KJC 11.00” Softail rear fender. Fits Softail style frames using up to 250mm wide rear tires. Fender is 11.00” wide and 31.50” long. KJC 12.50” Softail rear fender. Fits Softail style frames using up to 280mm wide rear tires. Fender is 12.50” wide and 31.50” long. KJC 13.50” Softail rear fender. Fits Softail style frames using up to 300mm wide rear tires. Fender is 13.50” wide and 31.50” long. Kendall Johnson designed signature series Heavy duty rear fenders for Softail-style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. KJC 9.00” Rigid rear fender. Fits Rigid style frames using up to 200mm wide rear tires. Fender is 9.00” wide and 41.85” long. KJC 11.00” Rigid rear fender. Fits Rigid style frames using up to 250mm wide rear tires. Fender is 11.00” wide and 41.85” long. KJC 12.50” Rigid rear fender. Fits Rigid style frames using up to 280mm wide rear tires. Fender is 12.50” wide and 41.85” long. KJC 13.50” Rigid rear fender. Fits Rigid style frames using up to 300mm wide rear tires. Fender is 13.50” wide and 41.85” long. Kendall Johnson designed signature series Heavy duty rear fenders for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel, formed in one piece for added strength and reinforced at both ends. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw, without chain cut and un-drilled for custom applications. Narrow Glide Front Fender Ducktail Front Fender • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends 11302 SOLD EACH Fits FXWG and FXST(C) models 1980 to Present. 11304 SOLD EACH Replaces 59007-73A & 59111-74 Fits FX, FXR and XL models 1973 to Present. Stock replacement front fender. Raw fender comes complete with chrome brackets and necessary rivets. Superb looking front fender designed for use on FXWG and FXST(C) models, gives greater weather protection than the stock fender. Great to use with the Heritage conversion when the stock 21” wheel is retained. Fender is complete with polished die-cast spaces. Ducktail Front Fender for 21” Wheels Quickbob Steel Front Fender for FXWG and FXST Models • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories 11455 11306 SOLD EACH Fits 1980 to Present FXWG, FXST and FXST(C) models. These low and wide Quickbob front fenders recreate that nostalgic look that is becoming popular again. Narrow Front Fender for FX / FXR / XL SOLD EACH Fits as stock replacement for Road Glides or Road King 1994 thru 2007 FLT, FLHT, FLHR and FLTR models. Looks good in combination with our crown style fender spacers PT# 11517. • Clutch • Transmission • Drive Line Superb looking front fender designed for use on FL models and custom applications using 21” wheels. Front fenders are made from 0.080” (14 gauge) heavy duty steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. • Handlebar • Controls Heritage Front Fender • Footpegs • Accessories • Brakes • Forward Controls • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories 11300 • Electrical • Accessories SOLD EACH Replaces 59031-83 Fits FX, FXR and XL models 1973 to Present with either 35 or 39mm fork tubes. 11395 Custom narrow front fender with raw finish. For use with 18”, 19” or 21” rims. A perfect replica of the Heritage Softail front fender. Comes undrilled. SOLD EACH Fits all Heritage Softail models from 1986 & later. • Miscellaneous 07-03 • Inlet • Exhaust Springer Front Fender • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories 11307 • Dash • Instruments SOLD EACH Replaces 59176-96 Fits FXSTS Springer Softail models 1998 to Present. Replacement fender for FXSTS Springer Softails, comes raw finish with redesigned bracket for looks and strength. • Oil Tanks • Accessories Skirted Front Fender with Flip • Fenders • Fenders • Engine • Accessories Springer Front Fender for Big Twins • Clutch • Transmission • Drive Line • Handlebar • Controls 11301 SOLD EACH Fits all models with either 35 or 39mm front forks from 1973 to Present. Custom fender based on the early K model front fenders. • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • Lighting • License • License Plate Plate Mounts Mounts • Accessories • Accessories • Electrical • Accessories • Miscellaneous Miscellaneous 07-04 11305 SOLD EACH Replaces 59000-36 Fits 61”, 74” and 80” Big Twins from 1937 to 1948. An accurate reproduction of the early Springer front fender, comes complete with braces. Custom applications These heavy duty fenders are made from either 0.080” (14 gauge) steel or 0.12” aluminum. They are formed in one piece for added strength. Unlike the normal two piece welded fenders these won’t split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are available in two widths and several different styles. All front fenders are supplied raw and un-drilled for custom applications. Note: 4.75” fenders are used on Narrow Glide front ends with 19” or 21” wheels, will fit Wide Glide front ends if fender spacers are used. 6.25” fenders are for Wide Glide front ends using 16” wheels. Always check fender fit and installation before painting. Ridge Line & Smooth Custom Front Fender • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends Smooth Spartan Front Fenders • Gas Tanks • Accessories • Dash • Instruments 11001 SOLD EACH 11029 SOLD EACH Aluminum Smooth Custom 4.75” wide, 36.6” long front fender. 11034 SOLD EACH Steel Smooth Spartan 6.25” wide, 31.6” long front fender. • Oil Tanks • Accessories . Steel Smooth Custom 4.75” wide, 36.6” long front fender. • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls 11059 SOLD EACH Steel Ridge Line Spur 4.75” wide, 26.5” long front fender. • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-05 • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends Custom applications These fenders are made from 0.060” (16 guage) steel and are formed in one piece for added strength. Unlike the normal two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. All front fenders are supplied raw and un-drilled for custom applications. Note: Always check fender fit and installation before painting. Stretched Ridge Line and Smooth Custom Front Fenders Stretched Ridge Line and Smooth Liberator Front Fenders • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories 11061 • Fenders • Engine • Accessories SOLD EACH Steel Ridge Line Smooth Custom 4.90” wide, 38.55” long front fender. Fenders give approx 168 degree wheel coverage and fit up to 19” wheel rims using a maximum tire size of 90 x 90 x 19 11044 SOLD EACH Steel Stretched Smooth Liberator 4.90” wide, 38.4” long front fender. Fenders give approx 168 degree wheel coverage and fit up to 19” wheel rims using a maximum tire size of 90 x 90 x 19 • Clutch • Transmission • Drive Line • Handlebar • Controls Stretched Ridge Line and Smooth Drifter Front Fenders • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-06 11046 SOLD EACH Steel Stretched Smooth Drifter 4.90” wide, 38.4” long front fender. Fenders give approx 168 degree wheel coverage and fit up to 19” wheel rims using a maximum tire size of 90 x 90 x 19 Saracen Front Fender Shorty Front Fender Long Boy Front Fender • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends 11398 11393 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.25” wide and 34” long. 11456 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.75” wide and 34” long. 11402 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 5.50” wide and 34” long. Heavy duty front fender made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. Fits custom applications, fender is 4.25” wide, 6.48” wide between the left and right side mounting points and 32.2” long. 11368 SOLD EACH Fits custom applications, fender is 4.75” wide, 6.48” wide between the left and right side mounting points and 32.2” long. 11403 • Gas Tanks • Accessories SOLD EACH SOLD EACH Fits custom applications, fender is 5.50” wide, 6.48” wide between the left and right side mounting points and 32.2” long. Heavy duty shorty front fender for 21” rims, made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. 11392 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.25” wide and 43.5” long. 11370 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.75” wide and 43.5” • Dash • Instruments • Oil Tanks • Accessories • Fenders long. 11399 SOLD EACH Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 5.50” wide and 43.5” long. Heavy duty front fenders made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories J J 2 2 2 • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories Note: Always check fender fit and installation before painting. • Miscellaneous 07-07 • Inlet • Exhaust FXR Fat Bob Fender and Tail Light Kit Fat Bob Rear Fender for Softails • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories 11312 SOLD EACH Replaces 59914-86A Fits FXST, FXSTC and FXSTS models from 1984 to 1996. • Dash • Instruments Exact duplicate of the OEM rear fender. Comes with all necessary wiring loom clips and is pre-drilled for the fender struts. This Softail fender is perfect for crash repairs or to convert the full fenders on Heritage models. • Oil Tanks • Accessories Fat Bob Style Rear Fender 11318 SOLD EACH Fits all FXR models from 1982 to 1994. Fat Bob Rear Fenders for Sportsters A three piece kit that includes Fat Bob fender, Fat Bob tail light and Deluxe tail light bracket. Features flush mount tail light positioning. Bolts easily to all stock fender struts. Rear Fender for Early Sportster Models • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls 11308 SOLD EACH Fits Big Twin models and custom applications with left side chain drive. Raw unpainted finish OEM style Fat Bob rear fender. 38” long, 6-3/4” wide and 5-1/2” deep. Rear Fender for FX Models • Brakes 11313 SOLD EACH 11314 SOLD EACH Fits Sportster models 1982 to 1993. 11319 SOLD EACH Fits Sportster models 1994 thru 2003. Replaces 59611-73A Fits Sportster models from 1973 to 1978. These raw and unpainted steel fenders will give your Sportster that custom look. Fenders come with weld in tail light brackets. Available for 1982 thru 2003 Sportster models. Raw, unpainted steel rear fender with stock mounting holes in the sides, comes with tail light hole. • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories 11320 SOLD EACH Replaces 59682-78 Fits 4 speed FX models 1973 to 1985. Perfect reproduction of the OEM 4 speed FX rear fender with tail light mount. Will mount directly to the OEM fender struts. • Miscellaneous 07-08 Custom 21” Front Fenders • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends 11391 SOLD EACH Custom 4.25” front fender ready to be trimmed to your own individual taste. Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.25” wide and 43.75” long. 11400 SOLD EACH Custom 4.75” front fender ready to be trimmed to your own individual taste. Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 4.75” wide and 43.75” long. 11401 Heavy duty front fenders made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw, un-trimmed and un-drilled for custom applications. J 2 • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories SOLD EACH Custom 5.50” front fender ready to be trimmed to your own individual taste. Fits 19” or 21” wheels on Narrow Glide front end, can also be used on Wide Glide front ends if fender spacers are used. Fender is 5.50” wide and 43.75” long. J • Gas Tanks • Accessories 2 2 • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous Miscellaneous 07-09 • Inlet • Exhaust Rear Fender for Heritage Softails Heritage Style Rear Fender for FXR Models Hinged Rear Fender for Rigid Big Twins • Frames • Accessories • Kickstands • Front Ends 11237 • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories SOLD EACH Fits all Softail models from 1984 to 1999 as a custom replacement. 11321 SOLD EACH This fender is 7/8” wide and ready to use as an OEM replacement part or for FXST models wanting to convert over to full one piece fenders. Comes in an unpainted raw finish with pre-drilled holes for the fender struts. Fender has a smooth finish without a tail light mounting so that custom tail lights can be used. Fits FXR models from 1982 to 1994. FL & FLH Hinged Rear Fender Hinged Rear Fender for Early Big Twins This fender combines the classic styling of the Heritage Softail with the popular rubber mount design of the FXR. It mounts between the stock rear fender struts of FXR models and has the mounting for the 1973 up style tail light. 11309 SOLD EACH Replaces 59612-41 Fits Big Twin models 1949 to 1957. Replacement rear fender for rigid frame Big Twins, comes with the braces. Tail light holes are un-drilled to permit your choice of tail light. • Fenders • Fenders • Engine • Accessories 9.00” Right Side Drive Rigid Rear Fender NE W • Clutch • Transmission • Drive Line • Handlebar • Controls 11316 • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous Miscellaneous 07-010 SOLD EACH Replaces 59604-65A Fits 4 speed FL & FLH models 1958 to 1984 and FX models from 1973 to Present if FL style fender struts are used. Two piece hinged rear fender, rear section is un-drilled to accept your choice of tail light. Small indent must be made in the front right lower corner to clear the battery. 11317 11461 SOLD EACH Replaces 3711-39 Fits Big Twin models 1936 to 1948. Perfectly shaped and detailed reproduction of the rigid rear fender on early Big Twins, comes complete with brackets ready to bolt on. SOLD EACH Fits Rigid style right side drive frames like our Sportster frames PT# 23210 using up to 200mm wide rear tires, fender is 9.00” wide and 39.33” long. Heavy duty 9.00” right side drive rear fender for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. Round Top Rigid Rear Fenders Rigid Rear Fender without Chain Cut N EW Left Side Drive Rigid Rear Fenders • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends 11371 • Gas Tanks • Accessories SOLD EACH Custom 9.00” Rigid rear fender ready to be trimmed to your own individual taste. Fits Rigid style frames using up to 200mm wide rear tires. Fender is 9.00” wide and 39.33” long. 11374 SOLD EACH Custom 11.00” Rigid rear fender ready to be trimmed to your own individual taste. Fits Rigid style frames using up to 250mm wide rear tires. Fender is 11.00” wide and 39.33” long. 11387 SOLD EACH Custom 12.50” Rigid rear fender ready to be trimmed to your own individual taste. Fits Rigid style frames using up to 280mm wide rear tires. Fender is 12.50” wide and 39.33” long. 11413 SOLD EACH Custom 13.5” Rigid rear fender ready to be trimmed to your own individual taste. Fits Rigid-style frames using up to 300mm wide rear tires. Fender is 13.50” wide and 43.38” long. 11436 SOLD EACH Custom 14.25” Rigid rear fender ready to be trimmed to your own individual taste. Fits Rigid-style frames using up to 330mm wide rear tires. Fender is 14.25” wide and 43.38” long. Heavy duty 9.00”, 11.00”, 12.50”, 13.50” and 14.25” rear fenders for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. 11463 SOLD EACH Custom 9.00” Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 200mm wide rear tires. Fender is 9.00” wide and 40.25” long. 11464 SOLD EACH Custom 11.00” Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 250mm wide rear tires. Fender is 11.00” wide and 40.25” long. 11465 SOLD EACH Custom 12.50” Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 280mm wide rear tires. Fender is 12.50” wide and 40.25” long. 11414 SOLD EACH Custom 13.50” Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 300mm wide rear tires. Fender is 13.50” wide and 40.25” long. 11437 SOLD EACH 11372 SOLD EACH Fits Rigid style left side drive frames using up to 200mm wide rear tires, fender is 9.00” wide and 39.33” long. 11373 SOLD EACH 11388 SOLD EACH Fits Rigid style left side drive frames using up to 250mm wide rear tires, fender is 11.00” wide and 39.33” long. Fits Rigid style left side drive frames using up to 280mm wide rear tires, fender is 12.50” wide and 39.33” long. 11415 • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories SOLD EACH Fits Rigid style left side drive frames using up to 300mm wide rear tires, fender is 13.50” wide and 40.25” long. Heavy duty 9.00”, 11.00”, 12.50” and 13.50” rear fenders for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls Custom 14.25” Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 330mm wide rear tires. Fender is 14.25” wide and 40.25” long. • Footpegs • Accessories Heavy duty 9.00”, 11.00”, 12.50”, 13.50” and 14.50” rear fenders for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. • Lighting • License Plate Mounts • Hubs • Axles • Wheels • Accessories • Accessories • Electrical • Accessories J J 2 2 2 • Miscellaneous 07-011 • Inlet • Exhaust Right Side Drive Rigid Rear Custom Softail Rear Fenders Fenders Round Top Softail Rear Fenders • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories 11375 11396 SOLD EACH 11397 SOLD EACH Fits Rigid style right side drive frames using up to 250mm wide rear tires, fender is 11.00” wide and 39.33” long. Fits Rigid style right side drive frames using up to 280mm wide rear tires, fender is 12.50” wide and 39.33” long. 11416 SOLD EACH Fits Rigid style right side drive frames using up to 300mm wide rear tires, fender is 13.50” wide and 40.25” long. 11438 SOLD EACH Fits Rigid style right side drive frames using up to 330mm wide rear tires, fender is 14.25” wide and 40.25” long. Heavy duty 11.00”, 12.50”, 13.50” and 14.25” right side drive rear fenders for Rigid style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. SOLD EACH Custom 9.00” Softail rear fender ready to be trimmed to your own individual taste. Fits Softail-style frames using up to 200mm wide rear tires. Fender is 9.00” wide and 46.75” long. 11440 SOLD EACH Custom 10.25” Softail rear fender ready to be trimmed to your own individual taste. Fits Softail-style frames using up to 240mm wide rear tires. Fender is 10.25” wide and 45.88” long. 11377 SOLD EACH Custom 11.00” Softail rear fender ready to be trimmed to your own individual taste. Fits Softail-style frames using up to 250mm wide rear tires. Fender is 11.00” wide and 46.75” long. 11389 SOLD EACH Custom 12.50” Softail rear fender ready to be trimmed to your own individual taste. Fits Softail-style frames using up to 280mm wide rear tires. Fender is 12.50” wide and 45.88” long. 11404 SOLD EACH Custom 13.50” Softail rear fender ready to be trimmed to your own individual taste. Fits Softail-style frames using up to 330mm wide rear tires. Fender is 13.50” wide and 45.88” long. Heavy duty 9.00”, 10.25”, 11.00” , 12.50” and 13.50” rear fenders for Softail-style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw, un-trimmed and un-drilled for custom applications. 11376 SOLD EACH 11441 SOLD EACH 11378 SOLD EACH 11390 SOLD EACH 11405 SOLD EACH Fits Softail-style frames using up to 200mm wide rear tires, fender is 9.00” wide and 33.90” long. Fits Softail-style frames using up to 240mm wide rear tires, fender is 10.25” wide and 33.90” long. Fits Softail-style frames using up to 250mm wide rear tires, fender is 11.00” wide and 33.90” long. Fits Softail-style frames using up to 280mm wide rear tires, fender is 12.50” wide and 31.57” long. Fits Softail-style frames using up to 330 wide rear tires, fender is 13.50” wide and 31.57” long. Heavy duty 9.00”, 10.25”, 11.00” , 12.50” and 13.50” rear fenders for Softail-style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. J • Miscellaneous 07-012 J 2 2 2 Custom Rigid Rear Fender Round Top Softail Rear Fenders with License Plate Box Round Top Softail Rear Fenders with License Plate Frame & Stop / Tail light • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories 11457 SOLD EACH Fits Softail-style frames using up to 240mm wide rear tires, fender is 10.25” wide and 33.90” long (does not include license plate frame or stop and tail light). 11466 11458 SOLD EACH Fits custom applications. LED SLED 7” wide spun and welded rear fender. 13 gauge, 43” long. 11469 SOLD EACH LED SLED 9” wide spun and welded rear fender. 13 gauge, 43” long. NE W SOLD EACH Fits Softail-style frames using up to 250mm wide rear tires, fender is 11.00” wide and 33.90” long (does not include license plate frame or stop and tail light). 11459 SOLD EACH Fits Softail-style frames using up to 280mm wide rear tires, fender is 12.50” wide and 31.57” long (does not include license plate frame or stop and tail light). 11460 SOLD EACH Fits Softail-style frames using up to 330mm wide rear tires, fender is 13.50” wide and 31.57” long (does not include license plate frame or stop and tail light). Heavy duty 10.25”, 11.00” , 12.50” and 13.50” rear fenders with license plate box welded in for Softail-style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. 11442 SOLD EACH Fits Softail-style frames using up to 240mm wide rear tires, fender is 10.25” wide and 33.90” long. Includes chrome CNC machined license plate frame with DOT approved Half Moon LED stop and tail light. 11443 • Fenders • Engine • Accessories SOLD EACH Fits Softail-style frames using up to 280mm wide rear tires, fender is 12.50” wide and 31.57” long. Includes chrome CNC machined license plate frame with DOT approved Half Moon LED stop and tail light. 11445 • Oil Tanks • Accessories SOLD EACH Fits Softail-style frames using up to 250mm wide rear tires, fender is 11.00” wide and 33.90” long. Includes chrome CNC machined license plate frame with DOT approved Half Moon LED stop and tail light. 11444 • Dash • Instruments • Clutch • Transmission • Drive Line • Handlebar • Controls SOLD EACH Fits Softail-style frames using up to 330mm wide rear tires, fender is 13.50” wide and 31.57” long. Includes chrome CNC machined license plate frame with DOT approved Half Moon LED stop and tail light. Heavy duty 10.25”, 11.00” , 12.50” and 13.50” rear fenders with license plate box, license plate frame and Half Moon LED stop and tail light for Softail-style frames. Fenders are made from 0.080” (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders these won’t split or crack down the middle. The fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are supplied raw and un-drilled for custom applications. Includes chrome CNC machined license plate frame with DOT approved Half Moon LED stop and tail light. • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-013 • Inlet • Exhaust • Frames • Accessories • Kickstands Custom applications These heavy duty fenders are made from either 0.080” (14 gauge) steel or 0.12” aluminum. They are formed in one piece for added strength. Unlike the normal two piece welded fenders these won’t split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are available in four widths and several different styles. All rear fenders are supplied raw and un-drilled for custom applications. Note: Always check fender fit and installation before painting. • Front Ends Ridge Line & Smooth Custom Rear Fenders Ridge Line & Smooth Sentry Rear Fenders 11067 SOLD EACH 11082 SOLD EACH 11185 11201 SOLD EACH SOLD EACH 11189 SOLD EACH • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories • Fenders Aluminum Smooth Custom 9.00” wide, 38.75” long rear fender. • Engine • Accessories Aluminum Smooth Sentry 9.00” wide, 33.7” long rear fender. Steel Ridge Line Sentry 8.50” wide, 33.7” long rear fender. Steel Ridge Line Custom 7.25” wide, 38.75” long rear fender. • Clutch • Transmission • Drive Line Steel Ridge Line Custom 11.00” wide, 38.75” long rear fender. Ridge Line Sabre Rear Fenders • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-014 11221 SOLD EACH 11222 SOLD EACH Steel Ridge Line Sabre 8.50” wide, 32.79” long rear fender. Steel Ridge Line Sabre 9.00” wide, 32.79” long rear fender. Custom applications These heavy duty fenders are made from either 0.080” (14 gauge) steel or 0.12” aluminum. They are formed in one piece for added strength. Unlike the normal two piece welded fenders these won’t split or crack down the middle. The steel fenders have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. They are available in four widths and several different styles. All rear fenders are supplied raw and un-drilled for custom applications. • Inlet • Exhaust • Frames • Accessories • Kickstands Note: Always check fender fit and installation before painting. Ridge Line & Smooth Classic Rear Fenders Ridge Line & Smooth Pro Rear Fenders • Front Ends • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories 11170 SOLD EACH Steel Smooth Pro 7.25” wide, 29.6” long rear fender. • Fenders 11214 11194 SOLD EACH SOLD EACH Steel Ridge Line Pro 11.00” wide, 29.6” long rear fender. Steel Ridge Line Classic 11.00” wide, 33.7” long rear fender. • Engine • Accessories Ridge Line & Smooth Pro Stretched Rear Fenders • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories 11177 SOLD EACH Steel Smooth Pro Stretched 9.00” wide, 32.6” long rear fender. 11219 SOLD EACH Steel Ridge Line Pro Stretched 11.00” wide, 32.6” long rear fender. • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-015 • Inlet • Exhaust Heavy Duty Custom Flat Rear Fenders 11329 SOLD EACH 11330 SOLD EACH 11331 SOLD EACH 11332 SOLD EACH 6” wide flat fender for custom applications. • Frames • Accessories • Kickstands 7.5” wide flat fender for custom applications. 8.5” wide flat fender for custom applications. • Front Ends 9” wide flat fender for custom applications. These made in the USA heavy duty 0.080” (14 gauge) raw steel fenders are designed to fit Rigid style frames but can be used for other custom applications. • Gas Tanks • Accessories • Dash • Instruments Tilt Back Sissy Bar Straight Back Sissy Bar 7.5” to 9” Flat Rear Fender Braces • Oil Tanks • Accessories • Fenders 11323 SOLD EACH 11324 SOLD EACH 11325 SOLD EACH Fits 7.5” wide flat rear fenders. • Engine • Accessories • Clutch • Transmission • Drive Line 11327 SOLD EACH Fits Rigid style frames with 9” wide flat fenders. • Handlebar • Controls • Brakes Beautifully chrome plated tilt back sissy bar from 5/8” round stock. Measures 19” above fender with a total height of 32”. Use with KW 9” flat fender PT# 11332. 11328 SOLD EACH Fits Rigid style frames with 9” wide flat fenders. Fits 8.5” wide flat rear fenders. Beautifully chrome plated straight back sissy bar from 5/8” round stock. Measures 17-1/4” above fender with a total height of 32-1/2”. Use with KW 9” flat fender PT# 11332. • Forward Controls • Footpegs • Accessories Fatbob Style Fender Support 5” & 6” Flat Fender Brace • Hubs • Axles • Wheels • Accessories Fits 9” wide flat rear fenders. 9.00” Right Side Drive Rigid Rear Fender Brace NE W • Lighting • License Plate Mounts • Accessories • Electrical • Accessories 11322 • Miscellaneous 07-016 SOLD EACH Fits Fatbob style rear fenders. 11326 SOLD EACH Fits 5” & 6” wide flat fenders. 11462 SOLD EACH Fits 9.00” Rigid style right side drive rear fenders. Strutless Classic Rear Fenders Fender Braces for Rigid Round Top Fenders • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories 11228 • Dash • Instruments SOLD EACH Strutless Classic 9.00” wide, 37.5” long rear fender. These fenders will fit most Softail frames that measure 11” wide between the strut mounts. They will also fit most aftermarket frames with the use of spacers provided. The fenders are made from heavy duty 0.080” (14 gauge) steel and give approx 135 degrees of wheel coverage. All fenders come phosphate etched to help prevent corrosion and to give a good base for primers to adhere. 11409 SOLD EACH 11410 SOLD EACH Fits 9.00” wide round top Rigid fenders on our 180 Rigid frames. Fits 11.00” wide round top Rigid fenders on our 230 / 240 / 250 Rigid frames. 11411 SOLD EACH 11412 SOLD EACH Fits 12.50” wide round top Rigid fenders on our 280 Rigid frames. Fits 13.50” wide round top Rigid fenders on our 300 Rigid frames. Wide Ass 9” Strutless Rear Fender These braces are fabricated from 1/4” thick steel, then styled to enhance the lines of frame, fender and that big, bad wheel & tire. These braces are made specifically to work with our Wild Card Rigid fenders. One continuous piece of metal makes for the strongest rear fender brace on the market. • Oil Tanks • Accessories • Fenders • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories 11225 SOLD EACH Wide Ass Strutless 9.00” wide, 27.6” long rear fender. These 0.060” (16 gauge) fender has been designed to fit most Softail frames that measure 11” wide between the strut mounts. It will also fit most aftermarket frames with the use of spacers provided. Fender comes phosphate etched to help prevent corrosion and to give a good base for primers to adhere. • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-017 • Inlet • Exhaust 9” Wide Strutless Fender for 180 - 200 Rear Tires 11” Wide Strutless Fender for 230 - 250 Rear Tires 11338 11339 • Frames • Accessories • Kickstands • Front Ends • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories SOLD EACH Fits custom applications using 180 to 200 width tires. These made in the USA one piece 0.080” (14 gauge) strutless fenders have Kraft’s radiused struts perfectly welded in place for a clean custom look. SOLD EACH Fits custom applications using 230 to 250 width tires. These one piece 0.080” (14 gauge) strutless fenders are made in the USA and have Kraft’s radiused struts perfectly welded in place for a clean custom look. • Fenders Strutless Fenders with Box for 180 300 Rear Tires • Engine • Accessories • Clutch • Transmission • Drive Line 9” Wide Strutless Fender for 2000 up Softail-style Frame • Handlebar • Controls • Brakes • Footpegs • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-018 SOLD EACH 11342 SOLD EACH 11419 SOLD EACH Fits custom applications using 180 to 200 width tires. 9” wide strutless fender. Fender is 30” long. • Forward Controls • Hubs • Axles • Wheels • Accessories 11341 Fits custom applications using 240 width tires. 11” wide strutless fender. Fender is 30” long. 11340 SOLD EACH Fits 2000 up Softail-style frames and custom applications using 180 to 200 width tires. Fender is 31.5” long. These made in the USA one piece 0.080” (14 gauge) strutless fenders have Kraft’s radiused struts perfectly welded in place for a clean custom look. They have the ignition module location already set in the fender. Fits custom applications using 300 width tires. 13.50” wide strutless fender. Fender is 30” long. These one piece 0.080” (14 gauge) strutless fenders are made in the USA and have Kraft’s radiused struts perfectly welded in place for a clean custom look. They have the ignition module location already set in the fender. Crown Style Fender Spacers for FL Models Ball Milled Style Fender Spacers for FL Models Springer Fender Mountings • Inlet • Exhaust • Frames • Accessories • Kickstands • Front Ends 11519 SOLD AS SET Fits FL models using 5.50” front fenders like our Ducktail front fender PT#11455. Polished aluminum finish. Polished CNC machined billet 6061-T6 aluminum. Adds a custom touch to the front of your Road King. Measures 3.00” center to center between leg mounting holes, 1.38” thick at leg mounting point, 4.25” high and 5.00” across the widest point. 11518 11515 SOLD AS SET Fits FL models using 5.50” front fenders like our Ducktail front fender PT#11455. Chrome Plated aluminum finish. Nicely Chrome Plated CNC machined billet 6061-T6 aluminum. Adds a custom touch to the front of your Road King. Measures 3.00” center to center between leg mounting holes, 1.38” thick at leg mounting point, 2.40” high and 3.75” across the widest point. SOLD AS SET Fits 3/4” and 1” Front legs of Springer Front Ends. Nicely chrome plated Springer front fender mounting tabs. • Gas Tanks • Accessories • Dash • Instruments • Oil Tanks • Accessories • Fenders J J 2 2 2 • Engine • Accessories • Clutch • Transmission • Drive Line • Handlebar • Controls • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-019 • Inlet • Exhaust Slotted Radiused Contour Fender Struts Chrome License Plate Frame 11269 • Frames • Accessories • Kickstands SOLD EACH Fits all 7” x 4” license plates with 5-3/4” x 2-3/4” mounting holes. Chrome plated die cast license frame. • Front Ends 11361 SOLD AS SET Fits custom applications. • Gas Tanks • Accessories Raw finish steel struts for 9” fenders. Lay Down License Plate Bracket • Dash • Instruments These made in the USA fender struts have a nicely radiused CNC milled profile. Available in raw or chrome finish. • Oil Tanks • Accessories 11267 • Fenders Beautifully chrome plated replacements for the up right multi piece license plate mount and bracket on rear fenders. Comes with mounting hardware and two rubbers to help isolate vibration and allow you to mount the license plate to match the fender profile. • Engine • Accessories • Clutch • Transmission • Drive Line SOLD AS SET Flat style, fits all rear fenders from 1955 to Present, except FXWG & FXST models. Kraft/Tech Strut Mounting hardware Kit • Handlebar • Controls License Plate Mounting Chrome hardware Kit Billet Rigid Frame Fender Struts • Brakes • Forward Controls • Footpegs • Accessories • Hubs • Axles • Wheels • Accessories • Lighting • License Plate Mounts • Accessories • Electrical • Accessories • Miscellaneous 07-020 05100 SOLD AS KIT 05101 SOLD AS KIT Strut Mounting Hardware for Softail Style Kraft/Tech Frames - RAW 22005 Strut Mounting Hardware for Softail Style Kraft/Tech Frames - CHROME These kits are specifically designed for mounting Kraft/Tech curved struts as well as strutless fenders to Softail style frames. Kits included 2 pieces 1/2” - 13 x 1” flathead allen bolts as well as 4 pieces 3/8” - 10 x 1” buttonhead bolts. 05063 SOLD IN PAIRS Fender struts for all Rigid frame rear fenders. Beautifully chromed billet aluminum fender struts. SOLD AS KIT Fits all models and custom applications. License plate mounting hardware kit.
