car audio speakers/AV 2013

Passenger App
Control for iPod touch and iPhone
get connected with
your smartphone
Connect your iPod touch or iPhone via the optional RC-202IPV cable to display
compatible app content on the receiver's display and control the app directly
from your iPod touch or iPhone with passenger app control.
MirrorLink is a technology standard developed by the Car Connectivity
Consortium (CCC) that allows consumers to use their smartphone in a
car without looking at or touching their phone.
Why fuss with little iPod touch or iPhone screens
•P
assengers can access select audio and
video applications directly from an iPod
touch or iPhone portable
• View the apps on your A/V screen
(when parking brake engaged)
• Works with XAV-63, XAV-64BT
and XAV-701BT
•R
equires optional RC-202IP A/V
cable for XAV-63, 64BT and 701BT
• The technology achieves this through two-way
communication between the smartphone and
the in-vehicle infotainment system
•C
CC-approved applications and content
are mirrored from the mobile device onto the
automotive in-dash radio, allowing the user to
access the smartphone through the vehicle’s
digital display, steering wheel buttons and
audio system
• Control keys from the smartphone are
emulated on AVC display
• The control buttons are optimized for each
smartphone OS
For additional information and compatibility
please visit: http://www.mirrorlink.com
Compatible smartphone will expand by various
manufacturers. For the latest status please visit:
http://esupport.sony.com
car audio
speakers/AV 2013
2-Din WVGA 7'' motorised
touch-screen AV centre
• 7" TFT active matrix
• Touch-screen monitor WVGA
• 17:09 monitor aspect ratio
• Bluetooth version 2.0
• Gesture command
• Night and day modes
• Motorised angle adjustment
• 52W x 4
• App projection
• Zone
x Zone
• Time alignment
• 5V pre-out
• 5.1 channel pre-out
with CSO
• Sub-out
• AV-in x 2 (rear)
• Mic-in x 1 (rear)
• Camera-in
• Video-out x 1 (rear)
• Direct video streaming
• Navi-ready connection
2-Din WVGA 6.1''
touch-screen
AV centre
XAV-701BT
• 6.1" TFT active matrix
• Touch-screen monitor WVGA
resolution (800x480 pixels)
• 17:09 monitor aspect ratio
• Gesture command
• Night and day modes
Headrest/dashboard
LCD monitor
• 6.2" TFT active matrix
• 16:9 monitor aspect ratio
• Parking detector
•C
ollar headrest housing (incl.)
•M
etal stand for dashboard
Installation (incl.)
2-Din WVGA 6.1''
touch-screen AV centre
• 6.1" TFT active matrix
• Touch-screen monitor WVGA
resolution (800x480 pixels)
• 17:09 monitor aspect ratio
• Gesture command
• Night and day modes
Scan to learn more about Sony App Remote
and to download the Free app
XVM-B62
Slot-in LCD display DVD/VCD/
CD/MP3/AAC player with
frontal USB, 1-Wire Technology
for iPod and Walkman
connectivity and direct
video streaming.
MEX-DV1700U
XAV-63
XAV-64BT
sony.co.nz/xplod
The contents of this document do not form any part of a contract. Whilst all care has been taken in the preparation, no responsibility is accepted
amplifiers
Class-D mono
amplifier
When it comes to giving you a good kick in the pants, there’s no substitute for
Sony amplifiers. Flexible output configurations fit your needs from one channel
of power to many. With audiophile output stages, your music isn’t just loud, it’s
also clear. And sophisticated input level, crossover and low boost adjustments
to sub or not to sub
class D amplification
One of the glories of custom mobile audio is a
big amplifier driving a subwoofer. Freed from
the responsibility of reproducing midrange and
treble sound – the “sub” generates nothing
but deep bass. The results can be spectacular,
pumping out lows with a volume and realism
that rivals the live concert experience. As in
home theater systems, a single subwoofer
can perform well because deep bass is not
“directional.” The human auditory system can’t
tell where the bass is coming from.
“Powerful” doesn’t have to mean “big,” “heavy”
or “hot.” Conventional Class AB amplifiers only
manage to convert 50 to 60% of incoming
power into output to the speakers. The rest
gets dissipated as heat. At 90%, Sony’s Class D
amplification is far more efficient than traditional
Class AB amplifiers. As a result, the XM-GTR3301D
deliver incredible power without filling up – or
heating up – your trunk. These Class D amps are
designed or subwoofer use only.
6½" 2-way
separate speaker
• Peak power: 260W
• Rated power: 60W
•Frequency response:
40Hz–22kHz
• Sensitivity: 87±2dB/W/m
Woofer:
•HOP + aramid
and carbon fibre
XS-GTX1622S
Dynamic Distortion Suppressor
Active Thermal Control
When conventional amps are driven too hard,
they “clip” off the signal peaks, sending masses of
distortion to the speakers. The Dynamic Distortion
Suppressor of Sony’s XM-GTR3301D reduces peaks
without clipping them harshly. So distortion is
substantially reduced.
When the going gets hot, conventional
thermal control simply shuts your amp
down until it’s cool. Sony’s XM-GTR3301D
have a better way. Active Thermal Control
automatically lowers the output until it’s safe
• MOSFET power supply
•Maximum output power:
1100W
•Rated output power:
1 ch x 330W at 4 ohm
1 ch x 600W at 2 ohm
• Low pass filter (variable):
50Hz–300Hz, slope 12dB/oct
• Frequency response:
10Hz–300Hz
• Signal-to-noise ratio: 65dBA
• Dimensions (WxHxD in mm):
356.8 x 55 x 276.8
speakers
The tweeters create a soundstage that appears to float in
midair. The midranges reproduce the human voice with
the presence of a live concert. The subwoofers deliver the
deepest bass drums with an impact you can feel on every
kick. This is the way mobile audio ought to sound – and
does – with our Mobile speakers.
XM-GTR3301D
4/3 channel stereo
power amplifier
XM-GTR4A
Asymmetric 4/3
channel stereo
power amplifier
• MOSFET power supply
•Maximum output power:
1200W
•Rated output power:
2 ch x 60W + 2 ch x 125W at
4 ohm. 2 ch x 60W at 4 ohm
+ 1 ch x 340W at 4 ohm BTL.
2 ch x 80W + 2 ch x 170W
at 2 ohm.
• High pass filter (front):
50Hz–300Hz, slope 12dB/oct
•Low pass filter (rear):
50Hz–300Hz, slope 12dB/oct
•Frequency response:
10Hz–100kHz
• Signal-to-noise ratio: 90dBA
•Dimensions (WxHxD in mm):
424 x 55 x 280
XS-GT6938F
XS-GTX1642
6½" full-range 4-way
coaxial speaker
• Peak power: 350W
• Rated power: 60W
• Sensitivity: 90±2dB/W/m
Woofer:
• HOP + aramid & carbon fibre
• 85mm ferrite magnet
6x9" full-range 3-way
coaxial speaker
•
•
•
Peak power: 500W
Rated power: 85W
Frequency response:
30Hz–30kHz
6x9" full-range 3-way
coaxial speaker
• Peak power: 420W
• Rated power: 50W
• Frequency response:
40Hz–22kHz
• Sensitivity: 92±2dB/W/m
Woofer:
•HOP + aramid and
carbon fibre
6½" full-range 3-way
coaxial speaker
• Peak power: 260W
• Rated power: 40W
•Frequency response:
50Hz–24kHz
• Sensitivity: 91±2dB/W/m
Woofer:
•HOP + aramid and
XS-GT1338F
5¼" full-range 3-way
coaxial speaker
• Peak power: 230W
• Rated power: 35W
•Frequency response:
60Hz–24kHz
• Sensitivity: 88±2dB/W/m
Woofer:
•HOP + aramid and
carbon fibre
4" full-range 3-way
coaxial speaker
• Peak power: 210W
• Rated power: 30W
•Frequency response:
60Hz–24kHz
• Sensitivity: 88±2dB/W/m
Woofer:
•HOP + aramid and
carbon fibre
XS-GTF5738
5x7" full-range 3-way
coaxial speaker
• MOSFET power supply
•Maximum output power:
600W
•Rated output power:
4 ch x 60W at 4 ohm
2 ch x 70W +
1 ch x 140W at 4 ohm
•Dimensions (WxHxD in mm):
376 x 55 x 252
SW series mono
block amplifier
XM-GTX6021
2/1 channel stereo
power amplifier
• MOSFET power supply
•Maximum output power:
350W
•Rated output power:
2 ch x 60W at 4 ohm
1 ch x 150W at 4 ohm BTL
2 ch x 75W at 2 ohm
•Dimensions (WxHxD in mm):
326 x 55 x 200
XS-GT1638F
XS-GT1038F
SW series 3
channel amplifier
•Maximum output
power: 390W
•Rated output power:
35W x2 + 125W x1 @ 4 ohm
•Low pass filter:
160Hz, 18dB/oct
•Frequency response:
5–50kHz (2ch) + 5-160Hz
(1ch)
12" high
performance single
sealed loaded
enclosure-type
P5 subwoofer
12" capless high
performance dimpled
cone enclosure-type
P5 subwoofer
• Dual-voice coil
• Peak power: 2000W
• Rated input power: 420W
• Impedance: 4 ohm + 4 ohm
• Peak power: 220W
• Rated power: 35W
•Frequency response:
45Hz–23kHz
• Sensitivity: 89±2dB/W/m
Woofer:
•HOP + aramid and
carbon fibre
XS-GTX121LB
12" capless high
performance dimpled
cone enclosure-type
P5 subwoofer
XS-GTR101L
12" capless high
performance dimpled
cone enclosure-type
P5 subwoofer
XS-GTR121LD
XM-SW3
XM-SW1
XM-GTX6041
• Single-voice coil
• Peak power: 1700W
• Rated input power: 370W
XS-GTX6932
•Maximum output
power: 350W
•Rated output power:
140W x1 @ 4 ohm
•Low pass filter:
160Hz, 18dB/oct
•Frequency response:
5–160kHz
• Single-voice coil
• Peak power: 1000W
•Rated input power:
300W
• Impedance: 4 ohm
• Peak power: 1000W
• Rated input power: 300W
• Impedance: 4 ohm
•Sony original custom made
enclosure
XS-GTX121LS