Ingersoll Rand/ARO Piston Pumps

Transcription

®
Ingersoll Rand/ARO
Piston Pumps
For Transfering, Spraying & Dispensing
Numéric Index
MODEL
10067
61113
61729
62042
65109
65116
65138
65139
65782
65940
65986
66062
66100
66101
66197
66248
66258
66469
66480
66504
66516
66517
66542
66545
66547
66568
66585
66713
66717
66718
66731
66732
66971
67073
67074
67133
67134
67136
67139
76751
79244
91600
91790
92460
92968
92969
PAGE
70
51 - 52
52
52
54
51 - 56
52
52
53
69
54
67
52
52
52
58
67
57
54
65
58
58
52
52
52
54
52
51
54
73
57
57
52
51
51
55
57
57
51
64
67
67
73
73
61
61
MODEL
94254
94256
104282
104283
104284
104285
104286
104287
635040
635043
640067
640169
650250
650251
650252
650409
651100
651103
651412
651500
651511
651533
651533
651551
651729
651730
651830
651851
651852
651853
661173
100085 (Hasp)
104104-XXX
104174-X
104253-2
23644-400
27520-XXX
31680-XXX
612041-X
613112-XXF-C
613123-XXF-C
613124-XXF-C
622701-6
622702-10
622702-6
62808X-X
PAGE
52
52
70
70
70
70
70
70
73
73
51
51
53
53
53
8
53
53
68
63
63
63
65
65
69
69
54
52
52
52
67
71
71
71
71
73
61
53
4
10
14
18
54
54
54
51
MODEL
PAGE
641523-1
65030-1-B
650408-X
650408-X-X
650409-X
650439-XXX
650453-X
650483-X4X
650484-X4X
650485-X4X
650491-X43-B
650492-X43-B
650540-1
650541-1
650542-1
650543-1
650639-X4B
650640-X4B
650683-X4X
650683-X4X
650684-X4X
650685-X4X
650691-X43-B
650692-X43-B
650839-X4G-B
650840-X4G-B
650863-X4D-B
650866-X6D-B
650867-X6D-B
650871-XX4-B
650875-XXX-X
650888-XXX
650889-XXX
650891-XXX-X
650963-XXX-X
650967-XXX-X
650971-XXX-X
650989-XXD
651104-X
6513X
651412-X
651418-XX-X
651418-XX-X
651420-XX
651420-XXX
651421-XX
63
65
7
7
8
25
9
12
15
19
36
40
32
32
33
33
27
26
16
20
21
23
41
48
29
28
22
11
13
37
38
42
47
46
24
17
43
49
53
51
68
68
68
68
68
68
MODEL
651422-XX
651422-XXX
651500-1
65151X-XX-X
65151X-X
651535-2
651537-1
651555-B
65161X-X
65161X-XX
651747-X-X
651780-XXX-X
651790-XXX-X
651791-XXX-X
65184X-X
65809-X
65888-X
65888-XX
65986-1
661XX
661XX-X
66248-X
66333-B
66334-B
66353-1
66354-1
66500X
66516-X
66517-X
66541-X
665XX-X
66731-X
66732-X
67120-P4X
67121-P4X
67140-1
67187-1
67187-2
67195-X
67196-X
91020-1
91020-2
91192-X
91363-10
91364-10
93505-1
Table of contents
Table of Contents
Extrusion Informations
2-Ball Piston Pumps
4-Ball Piston Pumps
2
3
4- 24
25 - 29
Extrusion Packages
Extrusion Pumps
Accessories
Warranty and Noises
Emissions
30 - 35
36 - 49
50 - 73
74
PAGE
68
68
65
63 - 64
64
63
63
65
55 - 56
55 - 56
67
60 - 61
60 - 61
60
57
65
65
65
54
51
51
58
73
73
55
55
62
58
58
64
51
57
57
44
45
54
52
52
59
59
54
54
68
57
57
61
MODEL
PAGE
93506-1
93507-1
93944-XX
93944-XXX
93945-XX
93945-XXX
C28121-800
C28241-810
C28351-600
CAT66P-XXX-X
CHW
CHW-30
CSN
CSN-30
H253SS-XXX-X
H254SS-XXX-X
MQ3728-XXX-X
MQ3729-XXX-X
MQ3729-XXX-X
NM2202X-X1-X31
NM2304X-X1-X11
NM2322X-11-P4X
NP322L0X-X
NP322R0X-X
NP443R01-1
NP4-XXR-XX-XXX
NP6-XXR-XX-XXX
NP8-XXR-XX-XXX
P29122-600
P29241-610
P29351-600
P29351-604
TB022B-XXX-X
TB035B-XXX-X
TB03EB-XXX-X
TB045B-XXX-X
TB04EB-XXX-X
TB066B-XXX-X
TB06EB-XXX-X
TCXXX
TCXXXX
TCXXXX-X
61
61
68
68
68
68
69
69
70
71
72
72
72
72
71
71
71
71
71
5
6
39
30
31
33
34
35
35
69
69
70
70
71
71
71
71
71
71
71
66
66
66
EXTRUSION INFORMATIONS
Extrusion pumps
Application parameters
Accessories required
Extrusion pumps are frequently put in
the most difficult of applications:
moving high viscosity fluids. Extrusion
pumps are used to apply a bead of
material. In some instances the pump
supplies a continuous bead; other
applications call for intermittent
delivery. Typical high-viscosity fluids
pumped include caulkings, heavy
lubricants, mastics, sealers and inks.
Viscosity is the largest obstacle in an
extrusion application. As viscosities
increase, fluid flow decreases. In
general, 2-ball pumps can be used for
fluids with viscosities up to 50,000
cPs. Chop-check pumps are for
higher viscosity fluids. Pump ratios in
extrusion applications range from 9:1
to 65:1.
Several accessories will improve the
efficiency of an Extrusion
application. They include:
Follower Plates: Plates mount directly to
pump inlet. Fluid is assisted into pump.
Available for 20 liters pails and 200 liters
drums.
Follower Seals: Forms seal between
Follower Plate and Container to maintain
prime. Available in Single or Double Lip
Models. Use Single-Lip Wiper for
viscosities up to 300,000 cP. Double Lip
Wiper provides better wiping action on
higher viscosity fluids. Use Double-Lip
Wipers for fluids viscosities over
300,000 cP.
Lifts: Eases change over of empty
containers. An internal cylinder lifts the
pump from the container. Weight of air
motor, pump and mounting bracket
maintain pump prime. Used on medium
to high viscosity fluids. Available for 20
and 200 liters containers.
Rams: Function like a lift, but also exert
downward force. Ram air cylinders push
pump and follower plate into the fluid.
Available in single or two-post
configurations, for 5 or 55-gallon
containers. Used on medium to high
viscosity fluids.
Portability Kits: For single-post ram
mounted pumps. Wheels bolt onto base
of ram. Eases portability of unit around
application site.
Floor Mounts: Used when fluid is stored
in large, bulk containers. Gravity feeds
material into the pump inlet. Locate as
close to fluid container as possible.
Downstream Fluid Regulators: Used to
control fluid pressure at the dispense
point. Downstream regulators cut fluid
pressure to desired level. Also used to
eliminate pulsation to provide even
consistent flow of material.
Extrusion Guns: Used to dispense fluids
with viscosities above 200,000 cPs.
Available in manual or automatic
configurations. “Snuff-back” guns
eliminate drool at work site.
Extrusion Nozzle Kit: For manual or
automatic extrusion guns. Size of orifice
diameter controls size of bead extruded
from the gun.
Additional equipment is needed to
keep an extrusion pump primed.
Follower plates, lifts and rams assist
the flow of material into the pump
inlet. Without this equipment, the
fluid will not “flow” into the pump.
Lifts can be used for fluids with
viscosities up to 200,000 cPs. Rams
are needed for fluids with higher
viscosities. If a fluid is stringy, a Ram
may be needed for fluids with
viscosities as low as 60,000 cPs.
Extrusion pumps also use fluid mass
to keep the pump primed. When bulk
tanks are used, the weight of the fluid
will push it into the pump inlet.
1
2
4
5
4
6
Typical Extrusion
Applications
1
2
3
4
5
6
7
F-R-L Kit Assembly
ARO-STOP® Over-run Control
Two Post Ram
Downstream Fluid Regulator
Automatic Extrusion Gun
Extrusion Gun Nozzle Kit
10
Single Post Ram
Swivel
Manual Extrusion Gun
10 Extrusion Nozzle Kit
8
9
9
7
8
3
2-ball Pumps
1:1 / 34,1 Lpm / 2-ball • Piston Pumps
Pump Performance
Air Inlet Pressure Range
Fluid Pressure Range
Max. Rec’d Cycles Per Minute
Displacement Per Cycle
Volume/Cycle
Cycles Per Liter
Flow @ 60 Cycles / Minute
Noise Level @ 4.15 bars
0-10.3 bars
0-10.3 bars
75
18.8
307.7 ml
46.5
68.1-lpm
77.8 db (A)
1343.8 mm
Pump Specifications
Carbon Steel
Carbon Steel
Carbon Steel
637084
2”
6”
1/4-18NPTF-1 (F)
637081 (Buna)
637083 (Teflon)
Immersed
3/4”-14NPTF-1 (F)
612041-X : 5.9 Kgs.
612042-X : 6.4 Kgs.
Material Inlet
Material Outlet
Weight
879.5 mm
Lower Pump Material
Plunger Material
Cylinder Material
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Repair Kit
612041-X
Ordering
6 1 2 0
Accessories
4
1
-
X
Packings:
1 : Buna
3 : Teflon
4
AIR F/R/L:
Wall Mount:
Muffler:
AIR Line Oil:
Needle Valve:
AroStop:
C28123-600
61113
61879
62274 (0,95 l)
104104-N02
635040
2:1,Stainless Steel, Carbon Steel-Constructed • Piston Pumps
2-ball Pumps
Pump Performance
Max. Rec’d Cycles / Minute
Cycles Per Liters
Flow @ 60 Cycles/Minute
Noise Level @ 7 Bars
2-10.3 bars
4.8-24.2. bars
120
8.3 cm3
106
8.14 lpm
80 db (A)
C O AT I N G
™
Pump Specifications
Lower Pump Material
NM2202A-X1-X31:Carbon Steel
NM2202B-X1-X31: Stainless Steel 316
NM2202A-X1-X31: Carbon Steel
NM2202B-X1-X31: Stainless Steel 316
63716
637377
637379-X31(Stain. Steel)
2”
3”
1/4 -18 NPTF-1
NM2202A-X1-X31: 637378-X31
NM2202B-X1-X31: 637379-X31
NM2202A-11-X31: 1-1/2 –11-1/2 NPTF-1 (F)
NM2202A-41-X31: immersed inlet
NM2202B-11-X31: 1-1/4 –11-1/2 NPTF-1 (F)
NM2202A-41-X31: immersed inlet
3/4 - 14 NPTF-1
16.3 lpm
135.6 ml
NM2202A-11-X31: 7.9 Kgs
NM2202A-41-X31: 8.9 Kgs
NM2202B-11-X31: 7.8 Kgs
NM2202B-41-X31: 10.2 Kgs
Plunger Material
Air Motor:
Motor Repair Kits
Lower Pump Motor Kits
Air Motor Diameter
Stroke
Air Inlet
Material Inlet
Material Outlet
Max. Working Flow Rate
Volume / Cycle
Weight
868 mm
508.8 mm
NM2202A-11-X31
Accessories
Ordering
N M 2 2
0
2
X
-
X
Material:
A : Carbon Steel
B : Stainless Steel
1
-
X
3
1
Packing:
Type:
1 : Stub (Wall Mount)
4 : 200 Liters
7 : Ryton-Filled Teflon/Teflon
C : UHMW-PE/UHMW-PE
J : Polyurethane/UHMW-PE
61113 Wall Mount Bracket
For open-head drum or wall-mounting,
bracket features heavy-duty
construction with all necessary
hardware for quick installation.
66073-1 Air Line Connection Kit
Kit includes ARO air filter/
regulator with 1,50 m length of air
hose, gauge and coupler/connector.
67088-4 Sealed Bung Assembly
Used for inert blanket applications.
Needle Valve:
AroStop:
104104-N02
635040
5
2-ball Pumps
Pump Performance
Cycles Per Liters
Noise Level @ 7 bars
10.2 bars
8.1-40.8 bars
120
134.3 cm3
7.4
15.8-lpm
85 db(A)
TM
1463 mm
Pump Specifications
NM2304A-11-311
Stub
Carbon Steel
Carbon Steel
66913
637316
3”
3”
1/4” - 18 NPTF (f)
637176 for NM2304A-X1-311
637228 for NM2304B-X1-C11
1-1/2”-11-1/2 NPTF (f)
3/4”-14 NPTF (f)
NM2304X-11-311 = 14.5 Kgs.
NM2304X-41-311 = 20.9 Kgs.
Included
Material Inlet
Material Outlet
Weight
2” Bung Adapter
820.4 mm
990.6 mm
Lower Pump Material
Plunger Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
345.4 mm
Ordering
N M 2 3
Accessories
0
4
Material:
A : Carbon Steel
B : Stainless Steel
X
-
X
1
-
X
1
Packing:
Type:
C : UHMW-PE (Upper/Lower)
3 : Glass-Filled Teflon (Upper)
Virgin Teflon (Lower)
5 : GLass Filed Teflon / Leather
Staggered (Upper)
Virgin Teflon (Lower)
1 : Stub (Wall Mount)
4 : 200 Liters
8 : Universal (Stube)
(Without Bung)
9 : 200 Liters (Without Bung)
A : Stube Follower Plate
B : Universal (Stube With Alternet Bung)
6
1
AIR F/R:
Wall Mount:
Wet Sol:
Needle Valve:
AroStop:
P29122-600
61113
66333-B (0,95 l)
104104-N02
635040
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
18.3 - 91.8 bars
60
180.2 cm3
5.5
10.8 lpm
80 db(A)
C O AT I N G
™
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
316 Stainless Steel
316 Stainless Steel
Stainless Steel
65444-B
61268
4-1/4”
4”
1/2” NPT(F)
65108/65108-X
637010 for 650408-B / 650408-5-B
637010-4 for 650408-4-B / 650408-6-B
1-1/4” NPT(F)
3/4” NPT(F)
15.8 kgs.
Material Inlet
Material Outlet
Weight
803.2 mm
246.8 mm
650408-B
650408-X-B
Ordering
6 5 0 4
6 5 0 4
Accessories
0
0
8
8
-
B
X
Packings: Teflon (Upper & Lower)
-
B
Packings:
4 : UHMW-PE (Upper & Lower)
5 : Teflon, w/Ultra Coated Tube and
Rod (Upper & Lower)
6 : UHMW-PE, w/Ultra Coated Tube
and Rod (Upper & Lower)
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
C28241-810
66100
62274
91790
66333-B
104104-N04
23644-400
7
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
18.3 - 91.8 bars
75
180.2 cm3
5.5
10.5 lpm
80 db(A)
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
316 Stainless Steel
316 Stainless Steel
Stainless Steel
65444-B
61268
4-1/4”
4”
1/2” NPT(F)
65106 for 650409
65106-4 for 650409-4
637010 for 650409
637010-4 for 650409-4
1-1/4” NPSM(F)
3/4” NPT(F)
203 kgs.
Material Inlet
Material Outlet
Weight
1405 mm
844.5 mm
650409
650409-4
Ordering
6 5 0 4
6 5 0 4
Accessories
0
0
9
9
Packings: Teflon (Upper & Lower)
-
X
Packings:
4 : UHMW-PE (Upper & Lower)
8
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
C28241-810
66100
62274
91790
66333-B
104104-N04
23644-400
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
18.3 - 91.8 bars
60
180.2 cm3
5.5
10.5 lpm
80 db(A)
828 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Order parts separately for
Material Inlet
Carbon Steel
Carbon Steel (Hard Chrome)
Carbon Steel
65445-B
61268
4-1/4”
4”
1/2” NPT(F)
650453-X
637177 for 650453-5
650453-7, -8, -9
1-1/2”NPT for 650453-7 / 650453-9
Immersed for 650453-5 / 650453-8
3/4” NPT(F)
15.8 kgs. for 650453-7 / 650453-9
22.2 kgs. for 650453-5 / 650453-8
Material Outlet
Weight
1511 mm
942 mm
266.7mm
STUB
200 liters
650453-X
Ordering
6 5 0 4
Accessories
5
Type:
7:
5:
9:
8:
Stub (Wall Mount)
200 Liters
Stub (Wall Mount)
200 Liters
3
-
X
Packings:
Leather/Teflon
Teflon
UHMW-PE/Leather
UHMW-PE
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
C28241-810
66100
62274
91790
66333-B
104104-N04
23644-400
9
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
20.4 - 81.6 bars
60
981.5 cm3
1.0
56.7 lpm
88 db(A) w/muffler
1172.3 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
304 Stainless Steel (Hard Chrome)
66523-B
66614
8”
6”
3/4” NPT(F)
66942-XXF
637211-XXX
2” NPTF-1
1-1/4” NPTF-(f)
46.3 kgs.
640.5 mm
372.2 mm
613112-XXF-C
Ordering
6 1 3 1
Accessories
1
2
-
X
X
F
-
Packings:
C6 : UHMW-PE
K3 : CG-Filled Teflon with, Buna N Energizer
L6 : Mineral-Filled Teflon
P6 : UHMW-PE/Teflon Staggered
R6 : Teflon/UHMW-PE Staggered
10
C
Reference Mounting Footprint “A”
for related rams/accessories
Air F/R/L:
Wall Mount:
Mounting Post:
Airline Oil:
Muffler:
Wet Sol:
Floor/Follower Adpt.
Needle Valve:
AroStop:
28353
66542
67187-1
62274
92460
66333-B
67136
104104-N06
635043
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
20.4 - 81.6 bars
60
981.5 cm3
1.0
56.7 lpm
88 db(A) w/muffler
1172.3 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
400 Stainless Steel
15-5 Stainless Steel (Hard Chrome)
66523-B
66614
8”
6”
3/4” NPT(F)
66941-X6D
637211-XXX
2” NPT(M)
1-1/4” NPT(F)
46.3 kgs.
640.5 mm
372 mm
650866-X6D-B
Ordering
6 5 0 8
Accessories
6
6
-
X
6
D
-
B
Packings:
C:
P:
L:
R:
UHMW-PE
UHMW-PE/Teflon / Staggered
Mineral-Filled Teflon
Teflon/UHMW-PE Staggered
Air F/R/L:
Wall Mount:
Mounting Post:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
28353
66542
67187-1
62274
92460
66333-B
67136
104104-N06
635043
11
2-ball Pumps
11:1 / 13,9 Lpm / 2-ball • Piston Pumps • Integrity
Pump Performance
Cycles Per Liter
®
2 - 8.3 bars
22.4 - 112.2 bars
60
237.6 cm3
4.2
13.9 lpm
81.8 db(A)
C O AT I N G
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
™
1009 mm
300 Stainless Steel
17-4 Stainless Steel
316 Stainless Steel
65465-B
61268
4-1/4”
6”
1/2”NPT(F)
66300-X4X
637305-X4X
1” NPT(F) / 2” NPT(M)
1” NPTF-1(F)
19.5 kgs.
481 mm
(322 mm)
650483-X4X
Ordering
6 5 0 4
Accessories
8
3
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE
UHMW-PE/Leather (Upper)
UHMW-PE (Lower)
R : UHMW-PE (Upper), Teflon (Lower)
12
4
X
Plungers:
3 : 17-4 Stainless Steel
Hard Chrome Plated
B : 17-4 Stainless Steel
“Ultra” Coated
Reference Mounting Footprint “A” or “D”
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mount:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
66101
67136
65138
104104-N04
23644-400
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 8.3 bars
18.3 - 91.8 bars
60
180.2 cm3
5.5
10.8 lpm
80 db(A)
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
1143 mm
400 Stainless Steel
15-5 Stainless Steel (hard Chrome)
15-5 Stainless Steel (hard Chrome)
66651-B
637110
10”
6”
3/4” NPT(F)
66941-X6D
637211-XXX
2” NPT(M)
1-1/4” NPT(F)
56.8 kgs.
640.5 mm
370.8 mm
650867-X6D-B
Ordering
6 5 0 8
Accessories
6
7
-
X
6
D
-
B
Packings:
C : UHMW-PE
L : Mineral-Filled Teflon
P : UHMW-PE/Teflon (Upper),
UHMW-PE (Lower)
R : Teflon/UHMW-PE (Upper), Teflon
(Lower)
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
28353
66542
62274
66718
66333-B
67136
104104-N06
635043
13
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 6.1 bars
91.8 bars
60
981.5 cm3
1.0
56.7 lpm
82 db(A) w/muffler
1144.5 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
66651-B
637110
10”
6”
3/4” NPT(F)
66942-XXF
637211-XXX
2” NPT(M)
1-1/4” NPT(F)
56.8 kgs.
640.5 mm
372.2 mm
613123-XXF-C
Ordering
6 1 3 1
Accessories
2
3
-
X
X
F
-
C
Packings:
C6 : UHMW-PE
K3 : CG-Filled Teflon with, Buna N Energizer
P6 : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)
R6 : Teflon/UHMW-PE (Upper), Teflon (Lower)
14
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Floor/Follower Adpt.:
Floor Mount:
Needle Valve:
AroStop:
28353
66542
62274
66718
66333-B
67136
65138
104104-N06
635043
Cycles Per Liter
2-ball Pumps
Pump Performance
®
2 - 8.3 bars
44.8 - 224.4 bars
60
122.9 cm3
8.1
7.2 lpm
81.8 db(A)
C O AT I N G
™
1009 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
65465-B
61268
4-1/4”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66301-X4X
637306-X43
1” NPT(F) 2” NPT(M)
1” NPT(F)
19.5 kgs.
481 mm
322 mm
650484-X4X
Ordering
6 5 0 4
Accessories
8
4
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE/Leather Staggered
UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)
R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
4
X
Plungers:
3 : 17-4 S. S. Hard
Chrome Plated
B : 17-4 S.S. “Ultra”
Coated
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
66100
62274
91790
66333-B
66136
65138
104104-N04
23644-400
15
2-ball Pumps
Pump Performance
Cycles Per Liter
®
2 - 8.3 bars
46.9 - 234.6 bars
60
237.6 cm3
4.2
13.9 lp
84.8 db(A)
C O AT I N G
™
1009 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
65665-B
61355
6”
6”
1/2” NPTF
1-1/4” NPTF
66300-X4X
637305-X43
1” NPTF
21 kgs.
481 mm
322 mm
650683-X4X
Ordering
6 5 0 6
Accessories
8
3
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE (Lower)
Teflon (Lower)
16
4
X
Plungers:
3 : 17-4 S. S. Hard
Chrome Plated
B : 17-4 S.S. “Ultra”
Coated
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mount:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
66100
67136
65138
104104-N04
23644-400
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 6.1 bars
140.8 bars
70
981.5 cm3
1.0
68.6 lpm
88 db(A) w/muffler
1143 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
400 Stainless Steel
66506-B
637112
12”
6”
3/4” NPT(F)
66941-X6D
637211-XXX
2” NPT(M)
1-1/4” NPT(F)
63.6 kgs.
370.8 mm
640.5 mm
650967-X6D-B
Ordering
6 5 0 9
Accessories
6
7
-
X
6
D
-
B
Packings:
C:
L:
P:
R:
UHMW-PE
Mineral-Filled Teflon
UHMW-PE/Teflon (Upper), UHMW-PE (Lower)
Teflon/UHMW-PE (Upper), Teflon (Lower)
Air F/R/L:
Wall Mount:
Airline Oil:
Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
28353
66542
62274
66718
66333-B
67136
65138
104104-N06
635043
17
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 6.1 bars
140.8 bars
70
981.5 cm3
1.0
68.6 lpm
88 db(A) w/muffler
1143 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
66506-B
637112
12”
6”
3/4” NPT(F)
66942-XXF
637211-XXX
2” NPT(M)
1-1/4” NPT(F)
63.6 kgs.
640.5 mm
370.8 mm
613124-XXF-C
Ordering
6 1 3 1
Accessories
2
4
-
X
X
Packings:
C6 : UHMW-PE
K3 : CG-Filled Teflon with, Buna N Energized
R6 : Teflon/UHMW-PE (Upper), Teflon (Lower))
18
F
-
C
Air F/R/L:
28353
Wall Mount:
66542
Airline Oil:
62274
Muffler:
66718
Wet Sol:
66333-B
67136
Floor Mount:
65138
Needle Valve:
104104-N06
AroStop:
635043
Cycles Per Liter
2-ball Pumps
Pump Performance
®
2 - 8.3 bars
61.2 - 306.1 bars
60
90.1 cm3
11
4.9 lpm
81.8 db(A)
C O AT I N G
™
1009.3 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
65465-B
61268
4-1/4”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66302-X4X
637307-X43
1” NPT(F)
19.5 kgs.
481 mm
322 mm
650485-X4X
Ordering
6 5 0 4
Accessories
8
5
-
X
Packings:
3 : Teflon
C : UHMW-PE
G : UHMW-PE/Leather Staggered
P : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)
Teflon (Lower)
4
X
Plungers:
3 : 17-4 S. S. Hard
Chrome Plated
B : 17-4 S.S. “Ultra”
Coated
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
67136
65138
104104-N04
23644-400
19
2-ball Pumps
Pump Performance
Cycles Per Liter
Flow @ 60 Cycles /mn
®
2 - 8.3 bars
81.6 - 326.5 bars
60
237.6 cm3
4.2
13.9 lpm
89.8 db(A)
C O AT I N G
™
1106 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
66523-B
66614
8”
6”
3/4” NPT(F)
1-1/4” NPT(F)
66300-X4X
637305-X43
1” NPT(F)
30.9 kgs.
575 mm
322 mm
650883-X4X-B
Ordering
6 5 0 8
Accessories
8
3
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE (Lower)
Teflon (Lower)
20
4
X
Plungers:
D : 17-4 S. S. Hard
Chrome Plated
G : 17-4 S.S. “Ultra”
Coated
Air F/R/L:
28353
Airline Oil:
62274
Air Motor Muffler:
92460
Wet Sol:
66333-B
67136
Rams:
Page 57
Floor Mounts:
65138
Needle Valve:
104104-N06
AroStop:
635043
Cycles Per Liter
2-ball Pumps
Pump Performance
®
2 - 8.3 bars
92.8 - 367.3 bars
60
122.9 cm3
8.1
7.2 lpm
84.8 db(A)
C O AT I N G
™
1009 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
65665-B
61355
6”
6”
1/2” NPT(F)
66301-X4X
637306-X43
1” NPT(F)
21 kgs.
481 mm
322 mm
650684-X4X
Ordering
6 5 0 6
Accessories
8
4
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE (Lower)
Teflon (Lower))
4
X
Plungers:
3 : 17-4 S. S. Hard
Chrome Plated
B : 17-4 S.S. “Ultra”
Coated
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mounts:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
66101
67136
65138
104104-N04
23644-400
21
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 6.1 bars
91.8 - 306.1 bars
60
339.2 cm3
3.0
20.4 lpm
82 db(A) w/66718 muffler
1166 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
Ordering
6 5 0 8
Carbon Steel
420 Stainless Steel
66651-B
637110
10”
6”
3/4” NPT(F)
66475-X4D
637098-XXX
2” NPT(F)
1” NPT(F)
60 kgs.
650863-X4D-B
Accessories
6
3
-
X
4
D
-
B
Packings:
3:
C:
G:
P:
R:
22
429 mm
Teflon
UHMW-PE
UHMW-PE/Teflon Staggered
Reference Mounting Footprint “B”
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mount:
Floor Mounts:
Needle Valve:
AroStop:
28353
62274
66718
66333-B
66542
65139
104104-N06
635043
Cycles Per Liter
2-ball Pumps
Pump Performance
®
2 - 8.3 bars
124 - 408 bars
60
90.1 cm3
11.0
4.9 lpm
84.8 db(A)
C O AT I N G
™
1009 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
300 Stainless Steel
316 Stainless Steel
65665-B
61355
8”
6”
1/2” NPT(F)
66302-X4X
637307-X43
1” NPT(F)
21 kgs.
481 mm
322 mm
650865-X4X
Ordering
6 5 0 6
Accessories
8
5
-
X
Packings:
3:
C:
G:
P:
Teflon
UHMW-PE
UHMW-PE (Lower)
Teflon (Lower)
4
X
Plungers:
3 : 17-4 S. S. Hard
Chrome Plated
B : 17-4 S.S. “Ultra”
Coated
Reference Mounting Footprint “A” or
“D” for related rams/accessories
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mounts:
Floor Mount:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
66101
67136
65138
104104-N04
23644-400
23
2-ball Pumps
Pump Performance
Cycles Per Liter
2 - 6.1 bars
132.6 - 442 bars
60
339 cm3
2.9
20.4 lpm
88 db(A) w/66718 muffler
1167.5 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
Ordering
6 5 0 9
Carbon Steel
420 Stainless Steel
66506-B
637112
12”
6”
3/4” NPT(F)
66475-X4D
637098-XXX
2” NPT(F)
1” NPT(F)
66.8 kgs.
4087 mm
65650963-X4D-B
Accessories
6
3
-
X
4
D
-
B
Packings:
3:
C:
G:
P:
R:
24
662.7 mm
Teflon
UHMW-PE
UHMW-PE/Teflon Staggered
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Wall Mounts:
Floor Mount:
Needle Valve:
AroStop:
28353
62274
66718
66333-B
66542
65139
104104-N06
635043
Pump Performance
Cycles Per Liter
C O AT I N G
2 - 10.2 bars
4 - 20.4 bars
60
1345 cm3
0.74
80.6 lpm
81.1 db(A)
™
C O AT I N G
™
1087 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump End Series
Material Inlet
Material Outlet
Weight
316 Stainless Steel
17-4 Stainless Steel “Ultra” Coated
304 Stainless Steel “Ultra” Coated
65465-B
61268
4-1/4”
6”
1/2” NPT(F)
67200-X4B
637317-X4B
2” NPTF(M) / 1-1/2” NPTF(F)
1” NPTF(F)
30.8 kgs.
4-ball Pumps
Pump Specifications
558 mm
496 mm
650439-X4B
Ordering
6 5 0 4
Accessories
3
9
-
X
4
B
Packings:
7:
C:
F:
P:
R:
Teflon
UHMW-PE
UHMW-PE/Leather (Upper), UHMW-PE (Lower)
Air F/R/L:
Wall Mount:
Muffler:
Airline Oil:
Wet Sol:
Mounting Post:
Needle Valve:
AroStop:
C28241-810
66101
91790
62274
66333-B
67187-1
104104-N04
23644-400
25
Pump Performance
4-ball Pumps
Cycles Per Liter
2 - 10.2 bars
6.1 - 30.6 bars
60
1846.8 cm3
0.54
110.8 lpm
84.8 db(A)
C O AT I N G
™
1087 mm
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Material Inlet
Material Outlet
Weight
CF8M (316) Stnls. Steel
17-4 Stnls. Steel, “Ultra” Coated
304 Stnls. Stl. “Ultra” Coated
65665-B
61355
6”
6”
1/2”
67201-X4B
637318-X4B
2”NPT(M) / 1-1/2” NPT(F)
1” NPTF
33.2 kgs.
558 mm
496 mm
650640-X4B
Ordering
6 5 0 6
Accessories
4
0
-
X
4
B
Packings:
7:
C:
F:
P:
R:
26
Teflon
UHMW-PE
Air F/R/L:
Wall Mount:
Muffler:
Airline Oil:
Wet Sol:
Mounting Post:
Needle Valve:
AroStop:
C28241-810
66101
91790
62274
66333-B
67187-1
104104-N04
23644-400
Pump Performance
Cycles Per Liter
2 - 10.2 bars
8.1 - 40.8 bars
60
1345 cm3
0.74
80.6 lpm
84.8 db (A)
C O AT I N G
™
1087 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Material Inlet
Material Outlet
Weight
CF8M (316) Stns. Steel
17 - 4 Stns. Steel, “Ultra” Coated
65665-B
61355
6”
6”
1/2”NPT(F)
67200-X4B
637317-X4B
2” NPT(M) / 1-1/2” NPT(F)
1” NPT(F)
32.3 kgs.
4-ball Pumps
Pump Specifications
558 mm
496 mm
650639-X4B
Ordering
6 5 0 6
Accessories
3
9
-
X
4
B
Packings:
7:
C:
F:
P:
R:
Teflon
UHMW-PE
Air F/R/L:
Wall Mount:
Mounting Post:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
C28241-810
66101
67187-1
62274
91790
66333-B
104104-N04
23644-400
27
Pump Performance
4-ball Pumps
Cycles Per Liter
2 - 8.1 bars
10.2 - 40.8 bars
60
1771 cm3
0.56
105.8 lpm
89.8 db(A)
C O AT I N G
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Material Inlet
Material Outlet
Weight
™
1184 m
CF8M (316) Stns. Steel
66523-B
66614
8”
6”
3/4” NPT(F)
67201-X4G
637318-X4C
2” NPT(M) / 1-1/2” NPT(F)
1” NPT(F)
43.5 kgs.
652 mm
496 mm
650840-X4G-B
Ordering
6 5 0 8
Accessories
4
0
-
X
4
G
Packings:
7:
C:
F:
P:
R:
28
Teflon
UHMW-PE
-
B
Air F/R/L:
Wall Mount:
Mounting Post:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
28353
66542
67187-1
62274
92460
66333-B
104104-N06
635043
Pump Performance
Cycles Per Liter
2 - 8.1 bars
14.2 - 57.1 bars
60
1270 cm3
0.78
94.5 lpm
89.8 db(A)
C O AT I N G
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Material Inlet
Material Outlet
Weight
1184 m
CF-8M Stns. Steel
66523-B
66614
8”
6”
3/4” - 14 n.p.t.f.-1 (f)
67200-X4G
637317-X4C
2” NPT(M) / 1-1/2” NPT(F)
1” NPT(F)
42.6 kgs.
652 mm
4-ball Pumps
Pump Specifications
™
496 mm
650839-X4G-B
Ordering
6 5 0 8
Accessories
3
9
-
X
4
G
Packings:
7:
C:
F:
P:
R:
Teflon
UHMW-PE
-
B
Air F/R/L:
Wall Mount:
Mounting Post:
Airline Oil:
Muffler:
Wet Sol:
Needle Valve:
AroStop:
28353
66542
67187-1
62274
92460
66333-B
104104-N06
635043
29
Low Volume / High Viscosity / Extrusion Packages
Package Contents
NP322L01-1 22:1 Ratio, Carbon Steel Extrusion Package
NM2322E-11-P43
Carbon Steel Pump
129121-400
Air Filter/Regulator
651840-1
Carbon Steel Follower Plate
67075
Portable Lift
Basic Pump Performance
Extrusion Pumps
Maximum Working Flow:
Lower Pump Material
Plunger Material
Air Motor
Air Motor Repair Kit
NP322L0X-1
Portable Lift Only - Not a Ram Lower Pump Repair Kit
2 - 10.2 bars
44.8 - 244.4 bars
3.7 l/min
31.1 cm3
Carbon Steel
17 - 4 Stainless Steel
66915
637316
67100-P43
637290-P43
Package Contents
NP322L02-1 22:1 Ratio, Stainless Steel Extrusion Package
NM2322F-11-P43
Stainless Steel Pump
129121-400
Air Filter/Regulator
651841-1
Stainless Steel Follower Plate
67075
Portable Lift
Maximum Working Flow
Lower Pump Material
Plunger Material
Air Motor
2 - 10.2 bars
44.8 - 244.4 bars
3.7 l/min
31.1 cm3
66915
637316
67101-P43
637291-P43
Accessories
Needle Valve:
AroStop:
30
104104-N02
635040
Package Contents
NP322R01-1 22:1 Ratio, Carbon Steel Extrusion Package
NM2322E-11-P43
Carbon Steel Pump
F25241-100
Air Filter
R27241-600
Air Regulator
651840-1
651615-B
Single Post Ram
66713
Optional Portability Kit
67189
Optional Hold Down Kit
2 - 10.2 bars
44.8 - 244.4 bars
3.7 l/min
31.1 cm3
Carbon Steel
66915
637316
67100-P43
637290-P43
Package Contents
NP322R02-1 22:1 Ratio, Stainless Steel Extrusion Package
NM2322F-11-P43
F25241-100
Air Filter
R27241-600
Air Regulator
651841-1
651615-B
Single Post Ram
66713
NP322R0X-1
Extrusion Pumps
Lower Pump Material
Plunger Material
Air Motor
Lower Pump Material
Plunger Material
Air Motor
2 - 10.2 bars
44.8 - 244.4 bars
3.7 l/min
31.1 cm3
66915
637316
67101-P43
637291-P43
Accessories
Needle Valve:
AroStop:
104104-N02
635040
31
Package Contents
650540-1 43:1 Ratio, Carbon Steel Extrusion Package
67120-P43
Carbon Steel Pump
651840-1
67075
Portable Lift
Extrusion Pumps
65054X-1
Air Powered Lift ONLY -
Flow @ 75 Cycles/Minute:
Lower Pump Material
Plunger Material
Air Motor
Not a Ram
2 - 10.2 bars
87.7 - 438.7 bars
3.4 l/min
45.8 cm3
Carbon Steel
17-4 Stnls. Steel (Chrome Plated)
65440
61268
67100-P43
637290-P43
Package Contents
650541-1
67121-P43
651841-1
67075
43:1 Ratio, Stainless Steel Extrusion Package
Portable Lift
Lower Pump Material
Plunger Material
Air Motor
2 - 10.2 bars
87.7 - 438.7 bars
3.4 l/min
45.8 cm3
65440
61268
67101-P43
637291-P43
Accessories
Needle Valve:
AroStop:
32
104104-N04
23644-400
Package Contents
650542-1 43:1 Ratio, Carbon Steel Extrusion Package
(-2 Same except Follower is 651840-2)
67120-P43
Carbon Steel Pump
651840-1
651615-B
Single Post Ram
66713
Lower Pump Material
Plunger Material
Air Motor
2 - 10.2 bars
87.7 - 438.7 bars
3.4 l/min
45.8 cm3
Carbon Steel
17 - 4 St. Steel (Chrome Plated)
65440
61268
67100-P43
637290-P43
650543-1
67121-P43
651841-1
651615-B
66713
65054X-1
43:1 Ratio, Stainless Steel Extrusion Package Shown with optional
67189 Stop & Bracket Assembly Kit
Single Post Ram
Lower Pump Material
Plunger Material
Air Motor
Extrusion Pumps
Package Contents
2 - 10.2 bars
87.7 - 438.7 bars
3.4 l/min
45.8 cm3
65440
61268
67101-P43
637291-P43
Package Contents
NP443R01-1*
67124-P43
651613-C
651840-3
R27221-100
91790
43:1 Ratio, Carbon Steel Extrusion Package
Carbon Steel Pump
Two-Post Mini Ram
Follower Plate
Regulator
Muffler
Lower Pump Material
Plunger Material
Air Motor
2 - 10.2 bars
87.7 - 438.7 bars
3.4 l/min
45.8 cm3
65440
61268
67101-P43
637291-P43
NP443R01-1
Accessories
Needle Valve:
AroStop:
104104-N04
23644-400
* This package can use 60 kg drums with a maximum height of 700mm
33
High Volume / High Viscosity / Extrusion Packages
Extrusion Systems
Packages include Pump, 651616-X Ram, Follower Plate Assembly,
65940 Filter/Regulator-Lubricator Kit, Air Motor Muffler & 90°Outlet Elbow.
Popular Model Example:
NP431R-02-G43
To get the desired pump ration and follower options, replace the X with appropriate
numbers from the “Pump Information,” “Follower Options” and “Packing Options”
Charts.
Ordering
NP4
XXR
XX
XXX
Extrusion Pumps
Series:
4-1/4” Air Motor
Packings Options:
Pump Information:
G43 UHMW-PE/Leather Staggered
R43 Teflon/UHMW-PE Staggered
(Upper) Teflon (Lower)
21 30:1 Stnls. Steel 2-Ball Pump
(650485-X43)
(650484-X43)
(650483-X43)
31 23:1 Carbon Steel Chop Check Pump
(650492-X43-B)
(650491-X43-B)
Accessories
Needle Valve:
AroStop:
34
104104-N04
23644-400
Follower Options:
02 Aluminum Follower Plate with
Polyurethane Double-Lipped Seal
52 Teflon Coated Aluminum Follower Plate
with Polyurethane Double-Lipped Seal
High Volume / High Viscosity / Extrusion Packages
Extrusion Systems
65940 Filter-Regulator-Lubricator Kit, 91790 Air Motor Muffler & 90° Outlet Elbow.
Popular Model Example:
NP624R-02-G43
To get the desired pump ration and follower options, replace the X with appropriate
numbers from the “Pump Information,” “Follower Options” and “Packing Options”
Charts.
Ordering
NP6
XXR
XX
XXX
Series:
6” Air Motor
Packings Options:
Pump Information:
Follower Options:
Extrusion Pumps
(650685-X43)
(650684-X43)
(650683-X43)
(650692-X43-B)
(650691-X43-B)
Accessories
Needle Valve:
AroStop:
104104-N04
23644-400
Extrusion Systems
651729 Filter/Regulator-Lubricator Kit, Air Motor Muffler & 90° Outlet Elbow.
Ordering
NP8
XXR
XX
XXX
Series:
8” Air Motor
Packings Options:
Pump Information:
34 44:1 Carbon Steel Pump
(650891-X47-B)
Follower Options:
Accessories
Needle Valve:
AroStop:
104104-N06
635043
35
12:1 / 12,4 Lpm / Extrusion • Piston Pumps
Pump Performance
Cycles Per Litre
2 - 10.2 bars
24.4 - 122.4 bars
60
206.4 cm3
4.8
12.4 l/min
80 db(A) w/muffler
1311.9 mm
Extrusion Pumps
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Chop Check Pump Model
Material Inlet
Material Outlet
Weight
Carbon Steel (Nickel Plated)
17.4 Stnls. Steel (Hard Chrome Plated)
65465-B
61268
4-1/4”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66243-X43-B
637071-X43-B
Flange Mount
1” NPT(F)
29 kgs.
780.6 mm
450.4 mm
650491-X43-B
0
50
CYCLES PER MINUTE
150
200
100
250
300
120
120
Performance based on 90 wt. gear oil at ambient temperature
8.3 bars
100
Fluid Pressure (Bars)
8.3 bars
80
6.2 bars
6.2 bars
4.1 bars
60
80
60
4.1 bars
40
40
20
20
0
0
10
20
30
40
Air Consumption (litres/sec.)
100
0
50
LITRES PER MINUTE DELIVERY
Ordering
6 5 0 4
Accessories
9
1
-
X
4
3
-
B
Packings:
P : UHMW-PE/Teflon Staggered
(Upper), UHMW-(Lower)
R : Teflon/UHMW-PE Staggered
(Upper), Teflon (Lower)
36
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
C28241-810
62274
91790
66333-B
65138
104104-N04
23644-400
Page 57
Pump Performance
Cycles Per Litre
2 - 8.1 bars
26.5 - 106.1 bars
60
662 cm3
1.5
39.6 lpm
80 db(A) w/muffler
1329.5 mm
Pump Specifications
Carbon Steel (Chrome Plated)
66523
66614
8”
152 mm
3/4” NPT(F)
1-1/4” NPT(F)
66236-XX4-B
637128-XX4-B
Flange Mount
1-1/2” NPT(F)
57 kgs.
797.7 mm
508 mm
650871-XX4-B
0
CYCLES PER MINUTE
40
20
60
80
120
120
8.3 bars
100
100
80
6.2 bars
4.1 bars
60
80
4.1 bars
60
40
40
20
20
0
10
20
30
40
8.3 bars
6.2 bars
0
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
0
50
Ordering
6 5 0 8
Accessories
7
1
-
X
X
4
-
Packings / Springs:
F4 : UHMW-PE/Leather Staggered (Upper),
UHMW-PE (Lower), Multiple Wave Spring
J3 : Polyurethane (Upper), UHMW-PE (Lower), No Spring
P4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE
(Lower), Multiple Wave Spring
R4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Multiple Wave Spring
B
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAM:
28353
62274
92460
66333-B
65139
104104-N06
635043
Page 57
37
Pump Performance
Cycles Per Litre
6.1 bars
122.4 bars
60
662 cm3
1.5
39.6 l/min
82 db(A) w/muffler
1301.7 mm
Extrusion Pumps
Pump Specifications
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
Carbon Steel (Chrome Plated)
66651
637110
10”
6”
3/4” NPT(F)
1-1/4” NPT(F)
66236-XX4-B
637128-XX4-B
Bolted Flange
1-1/2” NPT(F)
65.4 kgs.
797.7 mm
508 mm
650875-XX4-B
0
20
40
CYCLES PER MINUTE
60
80
120
180
100
180
160
6.2 bars
160
6.2 bars
120
120
4.1 bars
4.1 bars
100
100
80
80
60
60
40
40
20
20
0
0
10
20
30
40
50
60
70
140
140
0
Ordering
6 5 0 8
Accessories
7
5
-
X
X
4
-
Packings / Springs:
F4 : UHMW-PE/Leather Staggered (Upper), UHMW-PE
J3 : Polyurethane (Upper), UHMW-PE (Lower),
No Spring
P4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE
R4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
38
B
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
66718
66333-B
65139
104104-N06
635043
Page 57
Pump Performance
Cycles Per Litre
Maximum Working Flow
Noise Level @ 6.8 bars
2 - 10.2 bars
44.8 - 244.4 bars
120
31.1 cm3
32.1
0.3.7 l/min
85 db(A)
857 mm
Pump Specifications
316 Stnls. Steel
66915
637316
3”
3”
1/4” NPTF-1 (F)
NM2322F-11-P43 67101-P43
NM2322F-11-P43 67101-P48
NM2322F-11-P43 637291-P43
NM2322F-11-P48 637291-P48
Follower Plate Mounted
1/2” NPT(F)
13 kgs.
Lower Pump Repair Kits
Material Inlet
Material Outlet
Weight
0
CYCLES PER MINUTE
100
50
150
621 mm
430 mm
360 mm
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
NM2322F-11-P4X
200
160
14
140
10
6.2 bars
100
8
4.1 bars
6.2 bars
80
6
60
4.1 bars
4
40
2
20
0
120
12
8.3 bars
8.3 bars
0
1
2
3
4
5
0
6
Ordering
N M 2 3
Accessories
2
2
X
- 1
Pump Material:
E : Carbon Steel
F : Stainless Steel
Packing Material:
P : UHMW-PE
Glass Filed Teflon Staggered (Upper)
UHMW-PE (Lower)
1
-
P
4
X
Plunger:
3 : Hardened/SS
with hard chrome plating
8 : Hardened/SS
with alternate piston
Air F/R/L:
Airline Oil:
Wet Sol:
Follower Plate:
A.S.A.P. Packages:
Needle Valve:
AroStop:
128121-800
62274
66333-B
651841-1
NP322R02-1
NP322L02-1
104104-N02
365040
String Arrangment:
4 : Multiple Wave Spring
39
Pump Performance
Cycles Per Litre
2 - 10.2 bars
46.9 - 234.6 bars
60
113 cm3
8.8
6.8 l/min
80 db(A)
1310.6 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
17.4 Stainless (Hard Chrome Plated)
65465-B
61268
4-1/4”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66266-X43-B
637074-X43-B
Bolted Flange
1” NPT(F)
28.9 kgs.
779.8 mm
449.6 mm
650492-X43-B
0
CYCLES PER MINUTE
100
150
50
250
200
250
90
8.3 bars
200
70
6.2 bars
8.3 bars
80
4.1 bars
150
60
50
6.2 bars
40
100
30
4.1 bars
Extrusion Pumps
Pump Specifications
20
50
10
0
0
5
10
15
20
0
30
25
Ordering
6 5 0 4
Accessories
9
2
-
X
4
3
-
B
Packings:
UHMW-PE (Lower)
Teflon (Lower)
40
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
C28241-810
62274
91790
66333-B
65138
104104-N04
23644-400
Page 57
Pump Performance
Cycles Per Litre
2 - 10.2 bars
46.9 - 234.6 bars
60
206.4 cm3
4.8
12.4 l/min
83 db(A) w/muffler
1310.6 mm
Pump Specifications
17.4 Stnls. Steel (Hard Chrome Plated)
65665-B
61355
6”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66243-X43-B
637071-X43-B
Bolted Flange
1” NPT(F)
30.4 kgs.
779.8 mm
449.6 mm
650691-X43-B
0
50
150
120
8.3 bars
350
100
8.3 bars
300
6.2 bars
80
6.2 bars
250
4.1 bars
60
200
4.1 bars
150
40
400
CYCLES PER MINUTE
100
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
100
20
50
0
0
5
10
0
15
Ordering
6 5 0 6
Accessories
9
1
-
X
4
3
-
B
Packings:
UHMW-PE (Lower)
Teflon (Lower)
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
C28241-810
62274
91790
66333-B
65138
104104-N04
23644-400
Page 57
41
Pump Performance
Volume/Cycle
2 - 8.3 bars
57.1 - 228.5 bars
70
20
327.6 ml
22.94 lpm
89.8 db(A)
Extrusion Pumps
Pump Specifications
Lower Pump Material:
Plunger Material:
Cylinder Material:
Air Motor:
Motor Repair Kit:
Motor Diameter:
Stroke:
Air Inlet:
Lower Pump Model:
Lower Pump Repair Kit:
Material Inlet:
Material Outlet:
Weight:
Carbon Steel
Hard Chrome Plated (Hardened Stainless Steel)
Carbon Steel
66523-B
66614
8”
6”
3/4-14 NPTF-1
67300-XXD
637348-XXD
Follower Plate and Floor Mounted
1-1/4-11-1/2 NPTF
63.5 Kgs.
650888-XXD
Ordering
6 5 0 8
Accessories
8
8
-
X
Packings / Springs:
C4 : UHMW-PE (Upper, Lower), V-type
J3 : PolyPak (Polymyte)
42
X
D
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
92460
66333-B
65139
104104-N06
635043
Page 57
Pump Performance
Cycles Per Litre
6.1 bars
183.6 bars
60
662 cm3
1.5
39.6 l/min
88 db(A) w/muffler
1301.7 mm
Pump Specifications
Carbon Steel
Carbon Steel
66506
637112
12”
6”
3/4” NPT(F)
1-1/4” NPT(F)
66236-XX4-B
637128-XX4-B
Bolted Flange
1-1/2” NPT(F)
66.8 kgs.
797,7 mm
508 mm
650971-XX4-B
0
10
20
CYCLES PER MINUTE
30
40
50
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
60
140
250
120
100
4.1 bars
150
80
4.1 bars
60
100
40
50
0
6.2 bars
6.2 bars
200
20
0
10
20
30
0
40
Ordering
6 5 0 9
Accessories
7
1
-
X
X
Packings / Springs:
F4 : UHMW-PE/Leather Staggered (Upper),
J3 : Polyurethane (Upper), UHMW-PE (Lower),
No Spring
P4 : UHMW-PE/Teflon Staggered (Upper),
R4 : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
4
-
B
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
66718
66333-B
65139
104104-N06
635043
Page 57
43
43:1 / 3,4 Lpm / Extrusion / Carbon Steel / Piston Pumps
Pump Performance
Cycles Per Liter
0 - 10.3 bars
0 - 451.7 bars
60
46.7 cm3
21.7
2.8 l/min
80 db(A)
1005.8 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Dimension
Carbon Steel
Carbon Steel
65440
61268
4-1/4”
4”
1/2” -14 NPTF-1(F)
1-1/4” NPT(F)
67120-P43
1006.6 mm
67124-P43
1232.7 mm
67120-P43
67100-P43
67124-P43
67100-P43
63729X-P4X
1/2”-14 NPTF-1 (Female)
20 kgs.
Lower Pump Model
Material Outlet
Weight
0
CYCLES PER MINUTE
100
50
150
67120-P4X
90
8.3 bars
80
300
70
8.3 bars
250
429 mm
200
350
6.2 bars
60
6.2 bars
200
50
4.1 bars
40
150
30
4.1 bars
100
20
50
0
619.7 mm
Extrusion Pumps
Pump Specifications
10
0
1
2
3
4
5
6
0
Ordering
6 7 1 2
Accessories
X
-
P
4
X
Pump Material:
0 : Acier Carbon
4 : Acier Carbon
Packings:
P : UHMW-PE/Glasss Filled
Teflon Staggered (Upper)
UHMW-PE (Lower)
44
Plungers
3 : Hardened Stainless
Steel with Chrome
Plated
Steel with Alternate
Pist
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Follower Plate:
A.S.A.P. Packages:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
Pages 59 à 61
650540-1
650542-1
104104-N04
23644-400
43:1 / 3,4 Lpm / Extrusion / Stainless Steel / Piston Pumps
Pump Performance
Cycles Per Liter
0 - 10.3 bars
0 – 451.7 bars
60
46.7 cm3
21.7
2.8 l/min
80 db(A)
1005.8 mm
Pump Specifications
Lower Pump Material
Plunger Material
Stainless Steel
3 Hardened Stainless Steel with
Chrome Plated
8 Hardened Stainless Steel with
Alternate Piston
65440
61268
4-1/4”
4”
1/2” NPT(F)
1-1/4” NPT(F)
67121-P43
1006.6 mm
67125-P43
1237.7 mm
67121-P43
67101-P43
67125-P43
67101-P43
63729X-P4X
1/2” - 14 NPTF-1 (Female)
220 kgs.
Cylinder Material
Lower Pump Model
Material Outlet
Weight
0
CYCLES PER MINUTE
100
50
150
67121-P4X
90
8.3 bars
80
300
6.2 bars
60
6.2 bars
200
50
4.1 bars
40
150
30
4.1 bars
100
70
8.3 bars
250
429 mm
200
350
20
50
0
619.7 mm
Extrusion Pumps
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Dimensions
10
0
1
2
3
4
5
6
0
Ordering
6 7 1 2
Accessories
X
-
P
4
X
Pump Material:
1 : Stainless Steel
5 : Stainless Steel
Packings:
P : UHMW-PE/Glasss Filled
Teflon Staggered (Upper)
UHMW-PE (Lower)
Plungers
Steel with Chrome
Plated
Steel with Alternate
Pist
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Follower Plate:
A.S.A.P. Packages:
Needle Valve:
AroStop:
C28241-810
62274
91790
66333-B
651841-1
650541-1
650543-1
104104-N04
23644-400
45
Pump Performance
Cycles Per Litre
8.1 bars
359.1 bars
60
237.6 cm3
4.2
14.3 l/min
88 db(A) w/muffler
1328.4 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
Carbon Steel
Carbon Steel
66523
66614
8”
6”
3/4” NPT(F)
1-14” NPT(F)
66243-X47-B
637071-X47-B
Bolted Flange
1” NPT(F)
40.4 kgs.
698.5 mm
449.5 mm
650891-X47-B
0
CYCLES PER MINUTE
40
60
20
80
400
120
8.3 bars
350
8.3 bars
100
300
80
6.2 bars
6.2 bars
250
4.1 bars
60
200
150
40
4.1 bars
100
20
50
0
Extrusion Pumps
Pump Specifications
0
5
10
0
15
Ordering
6 5 0 8
Accessories
9
1
-
X
4
7
-
B
Packings:
UHMW-PE (Lower)
Teflon (Lower)
46
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
92460
66333-B
65138
104104-N06
635043
Page 57
Pump Performance
Volume Per Cycle
2.1 - 6.2 bars
89.7 - 269.4 bars
70
20
327.6 ml
22.94 lpm
89.8 db(A)
Pump Specifications
Carbon Steel
Carbon Steel
66651-B
637110
10”
6”
3/4-14 NPTF-1
67300-XXD
637348-XXD
1-1/4-11-1/2 NPTF
74.8 Kgs.
650889-XXX
Ordering
6 5 0 8
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
Accessories
8
9
-
X
Packings / Springs:
UHMW-PE (Lower), V-type
X
D
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
66718
66333-B
65139
104104-N06
635043
651612-4
47
Pump Performance
Cycles Per Litre
2 - 10.2 bars
93.8 - 469.3 bars
60
113 cm3
8.8
6.4 l/min
83 db(A) w/muffler
1310.6 mm
Lower Pump Material
Plunger Material
Cylinder Material
Air Motor
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Exhaust Port
Material Inlet
Material Outlet
Weight
Carbon Steel
17.4 Stnls. Steel (Chrome Plated)
65665-B
61355
6”
6”
1/2” NPT(F)
1-1/4” NPT(F)
66266-X43-B
637074-X43-B
Bolted Flange
1” NPT(F)
30.4 kgs.
779.8 mm
449.6 mm
650692-X43-B
0
50
CYCLES PER MINUTE
100
150
400
120
8.3 bars
350
100
8.3 bars
300
6.2 bars
80
6.2 bars
250
4.1 bars
60
200
4.1 bars
150
40
Extrusion Pumps
Pump Specifications
100
20
50
0
0
5
10
0
15
Ordering
6 5 0 6
Accessories
9
2
-
X
4
3
-
B
Packings:
UHMW-PE (Lower)
Teflon (Lower)
48
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
C28241-810
62274
91790
66333-B
65138
104104-N04
23644-400
Page 57
Pump Performance
Volume/Cycle
2.1 - 6.2 bars
134.5 - 403.4 bars
70
327.6 ml
22.94 lpm
89.8 db(A)
Pump Specifications
Carbon Steel
Carbon Steel
66506-B
637112
12”
6”
3/4-14 NPTF-1
67300-XXD
637348-XXD
1-1/4-11-1/2 NPTF
74.8 Kgs.
650989-XXX
Ordering
6 5 0 9
Extrusion Pumps
Lower Pump Material
Plunger Material
Cylinder Material
Air Moto
Motor Repair Kit
Motor Diameter
Stroke
Air Inlet
Lower Pump Model
Material Inlet
Material Outlet
Weight
Accessories
8
9
-
X
Packings / Springs:
UHMW-PE (Lower), V-type
X
D
Air F/R/L:
Airline Oil:
Air Motor Muffler:
Wet Sol:
Floor Mount:
Needle Valve:
AroStop:
RAMS:
28353
62274
66718
66333-B
65139
104104-N06
635043
Pages 57
49
Accessories • Piston Pumps
Typical Recirculating System Installation
Accessories
In a typical recirculating system, an agitator (1) keeps particles in suspension in the material container. A siphon hose (2)
draws the material from its container and into the recirculating block (3) and then into the pump (4). When the material
leaves the outlet it enters the material filter (5) to screen out any impurities to prevent system clogging or tip plugging. The
material then enters a material heater (6) to bring the material to a workable temperature before it reaches the dispensing
point. The material travels through material hose (7) on its way to the dispensing point. One may use a standard airless spray
gun (8) with a recirculating block (9) to return the fluid to the inlet port of the pump. A spray tip (10) matched to the viscosity
of the paint, the pattern to be sprayed, and the finish required, must be chosen. The material not dispensed goes through
the recirculating block and travels through a material hose (7) back to the pump inlet to start the cycle again. A back pressure
regulator (11) is placed in this line to maintain the desired pressure at the spray gun. A three-way valve (12) is located
between the regulator and the pump inlet to allow evacuation of air from the system or flushing of material from the system
during clean-up operation. A length of hose (13) is recommended for flushing operation to route material to its proper
destination.
I.D.
1
2
3
4
5
6
7
8
9
10
11
12
13
Qty.
Model Number
Description
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
651100
651851 or
651852
65986-1 or
67140-X
91600
650485-X4X or
650640-X4B
651755-100-B
651747-X-B
628042-025
651533
79244
TCXXXX
651781-XXX-B or
651791-XXX-B
66117
Not Offered
Other Items:
66101
C28241-810
628042-XX
445-105
1950
65030-5
104104-XXX
236-40
Air-operated agitator (20 liters)
Drum cover (20 liters)
Drum cover (includes airoperated agitator) (200 liters).
3/4” siphon hose 2 m (20 liters)
3/4” siphon hose 2 m (200 liters)
Recirculating inlet block
4-1/4” 30:1 pump
6” 3:1 pump
Material outlet filter
Material heater
1/4” airless spray hose 7,50 m length
Airless spray hand gun
Double inlet adapter (recirculating block)
Airless spray tip
I.D.L. High Pressure backpressure regulator
I.D.L. Low Pressure backpressure regulator
Three-way valve
3/16” I.D. hose (60 mm)
1
1
1
2
5
1
1
1
50
Wall mount bracket
1/2” filter/ regulator/lubricator
1/4” material hose (connects filter to heater)
1/2 NPT(M) x 1/4 NPT(M) reducing bushing
1/4” adapters
In line swivel filter
Needle Valve
AroStop
Bulk/ Tote Tank Components
A
B
C
D
Model
628088-7
67073
628089-X
65138
65139
Description
MATERIAL SUPPLY HOSE - Heavy-duty 1” diameter hose features
neoprene construction with a 345 bars max. working pressure capacity.
Both ends 1” NPT(M). Length: 2,15m.
BALL VALVE - For use with 628088-7 material supply hose. 310 bars
max working. Pressure rated.
MATERIAL HOSE WITH FITTINGS - 3” diameter hose has cross-linked
polyethylene (internal) and neoprene (external) construction. Hose
comes with female cam-lever locking coupler, male adapter, cam-level
locking dust cap and dust plug. Length: 60mm. (628089-2), 182mm.
(628089-6). Max. working pressure: 8,6 bars
PUMP FLOOR MOUNT - See page 54 for floor mount information.
A
B
D
C
Portable Pump Carts
Model
66189
67139
PORTABLE CART - Will clear 711mm
openings. Unique “chair” design distributes
pump weight and makes moving easy.
305mm pneumatic tires also enhance
smooth transport.
Used with
3-1/4”, 4-1/4”,& 6” 2-Ball air
motor tie rod construction pumps.
3”, 3-1/4”, & 4-1/4” 4” air motor
single riser pumps.
3-1/4”, 4-1/4” & 6” air motor,
2-ball and 4-ball pumps.
8”, 10” & 12” air motor pumps
8” Integrity.
651605, 650605-1 Single Post
Ram and Rams packages.
66100, 66101, 61113 & 67054
Pump Mounts and correspon
ding pumps. See page 23.
Integrity Pumps 3-1/4”, 4-1/4”, 6”
Pump Lifts
67139
Model
Description
640067
SINGLE-POST LIFT - Single-acting air
All 200 liters
cylinder for easy drum change-over.
bung-type
Requires drum cover. 2.3m
pumps
extended.
TWO-POST LIFT- Two 51mm
3-1/4”, 4-1/4” 61729 Drum
diameter air cylinders connected by
and 6” air mtr. COVER (not
steel mounting bracket. Air connector 2-ball re- 4-ball, needed if
with strictor orifice controls ascent
and extrusion
using a
and descent. 1,016mm x 610mm
200 liters
follower plate)
base. 2.3m extended.
# Base must pumps be ordered separately.
HOSE KIT- Used when extrusion pumps
–
–
and 66248 follower plate are mounted on
640169 air lift. Directs air pressure under
follower plate to assist airlift in removing
pump from drum during changeovers.
640169
65116
66554-1
Accessories
Description
openings. Has 305mm tires.
66189-1 PORTABLE CART - Will clear 711mm
openings. Has 305mm tires.
66554-1 PORTABLE CART - 610mm to
762mm wheel spacing adjustment.
Has 406mm tires.
66554-2 PORTABLE CART - 610mm to
762mm wheel spacing adjustment.
Has 406mm tires.
66713
PORTABILITY KIT - Mounts directly to
the base of the 651605 SINGLE POST RAM,
to allow ease of portability. Will clear
711mm openings. Has 305mm tires.
67074
openings. Has 250 mm tires.
Used with
Drums Covers Follower plate
Used with
Used with
651852
–
or 66197
Drum Cover
200 liters
66248 ,
66248-1 or
66469
–
640067
51
Drum Covers
Model
Description
651851
DRUM COVER - Accepts 65986
SIPHON HOSE and 651100 AGITATOR
65986 SIPHON HOSE.
DRUM COVER - Stainless steel, accepts
20
651100 agitator
DRUM COVER - Includes hinged access 200
covers, 2” NPT(F) bung opening, and will
accept 651104-1 AGITATOR.
cover, 2” NPT(F) bung opening,
51mm x 864 mm pipe extension and 60307
AGITATOR
cover and carrying handles.
Also used with 640169 2-POST LIFT
DRUM COVER - Stainless Steel with 651104-1 200
agitator, suction tube with 90o elbow, 1” return
port, and hinged access door
66971
66197
651852
61729
651853
Container
liters
20
Pumps Used with
2”, 3”, and 3-1/4” air mtr.wallmounted stub pumps that use
1/2” ports diaphragm pump
2”, 3”, 3-1/4” and 4-1/4”
200 liters size bung type pumps.
Accepts 65986-1 Siphon hose
from any wall mounted pump.
Any 200 liters bung-type pump
that can be used with 640067 Lift.
3-1/4”, 4-1/4” and 6” air mtr.
2-ball, 4-ball.or extrusion pumps.
Accepts 67140-2 Siphon hose &
tube from wall-mounted pump.
Floor Mounts/ Adapters
Accessories
Model Description
65138 FLOOR MOUNT - Accepts suction line from bulk
containers or mixing tanks. 3” NPT(F) inlet.
1/4” NPT(F) vent port with plug.
65139
Pumps Used with
3-1/4” 4-1/4” & 6”air mtr. 2ball and extrusion pumps.
Also 8” 38:1 2-ball and 44:1
extrusion pumps (Type A).
65139 FLOOR MOUNT - Accepts suction line from bulk
8”, 10” and 12” air mtr. 2-ball &
containers or mixing tanks. 3” NPT(F) inlet.
extrusion pumps. Except 8”
1/4” NPT(F) vent port with plug.
38:1 2-ball and 44:1 extrusion
pumps (Type B)
62042 PUMP FLOOR DOLLY - Permits pump to be easily moved Must be used with 65138 or
around work site.Heavy gauge metal construction.
35139 floor mounts.
66545 INLET ADAPTER- permits 4-ball pumps to be used
4-Ball Pumps
with 66101 Wall Mount, 66554-1 Cart, or 640169
Lift. Cast iron adapter has a 2” NPT(F) fluid inlet.
66585 INLET ADAPTER- same as 66545, except
4-Ball Pumps
features stainless steel construction.
66547 PEDESTAL MOUNT- permits 4-ball pumps to be
4-Ball Pumps
floor mounted. Flash chrome-plated Meehanite
mount has (2) 1-1/2” NPT(F) fluid inlets.
67187-1 Mounting Post - Floor stand mounting post
4-1/4”, 6”Air Motor
with 4-1/4”, 6”& 8”air motors.
Stinger Pumps
67187-2 Mounting Post - Floor stand mounting post
2 sq.in
with hydraulic motors.
Hydraulic Motors
94254 INLET ADAPTER- 90o 1” NPT(M) X 3/4(F) used
Integrity Pumps
to adapt suction hose to 67139 cart.
94256 OUTLET ADAPTER- for mounting material filter
Integrity Pumps
1” NPT(M) X 1/2” NPT (M).
Wall Mounts
66100
66101
52
Model Description
61113 WALL MOUNT BRACKET - Has 2” NPT(F)
opening to accept bung type pumps.
Bracket slips over rim of open head drum
or can be wall-mounted.
66100 WALL MOUNT BRACKET - With 91395
REMOVABLE MOUNTING plate.
Pumps Used with
1”, 2”, 3”, 3-1/4” and 4-1/4” air mtr. stub
pumps fitted with bung adapters or
200 liters bung type pumps.
3” and 3-1/4” and 4-1/4” air mtr.
4” stroke pumps.
3-1/4”, 4-1/4”, and 6” air mtr.
2- and 4-ball pumps.
8”, 10” & 12” pumps
Agitators
Model
651100*
651104-3
65782
651103
651104-1
650251
Container liters
20
20
200
200
200
Bulk Tank
Mounting (Order Separately)
651851 Drum Cover
Drum Cover
66686 Drum Cover
Drum Side
66197 Drum Cover
* Includes air valve, fittings and tubing for quick installation.
Motor/Shaft spécifications
651100
Agitator
Model
Air
Motor
Model
H.P.
Air
Motor
RPM
Mount.
Diam. Length Standard Material Extra Cost Option
(mm) (mm) Model
Model Material
651100
651104-3
65782
651103
651104-1
650252
650250
650250
650250
650250
1/3
3/4
3/4
3/4
3/4
500-1000
300-3000
300-3000
300-3000
300-3000
Hub
Flange
Flange
Flange
Flange
12.7
12.7
12.7
12.7
12.7
305
267
813
813
813
31652-1
92094-3
73120
92094-1
92094-1
651103
416 SS
–
–
316 SS
–
–
CS
92094-1 316 SST
316 SS
–
–
–
–
316 SS
Propeller spécifications
Agitator Number
Model
of
Props
1
1
2
2
2
Prop
Standard
Model
Material
Prop
Direction
102
127
127
127
127
31680-102
31680-103
31680-103
31680-103
31680-103
316 SS
316 SS
316 SS
316 SS
316 SS
CCW
CCW
CCW
CW = Clockwise
CCW = Counter Clockwise
Extra Cost Option
Model
Material
Prop
Direction
31680-112 Bronze
–
–
31680-113 Bronze
CCW
–
CCW
651104-3
651104-1
Accessories
651100
651104-3
65782
651103
651104-1
Diam.
(mm)
53
Siphon Tubes
Model Description
65109
66568
65109
66568
Used with
Fluid
Outlet
Inches NPT
SIPHON TUBE ASSEMBLY - 200 liters size
Wall-mounted Stub Pumps when 3/4 (F)
carbon steel, with 2” bung adaptor. Hose not fluid viscosity requires a foot valve
or
included. Suggest 622681-06 Hose for 3/4” for priming or with drum cover that 1 (F)
inlet or 66701-06 Hose for 1” inlet.
has a 2” NPT (F) bung opening.
SIPHON TUBE WITH FILTER AND CHECK Wall-mounted Stub Pumps when 1 (F)
VALVE ASSEMBLY - 316 stainless steel with fluid is corrosive and viscosity
2” NPT bung adapter, AND 66480 FILTER
requires a foot valve for positive
AND CHECK VALVE assembly. Hose not
priming.
included. Suggest 622702-06 Hose.
Siphon Hoses
Model
Description
65986
Accessories
65986
SIPHON HOSE - 20 liters size.
Neoprene cover and thiokol tube.
Includes 91020-1 PIPE EXTENSION.
65986-1
SIPHON HOSE - 200 liters size.
Neoprene cover and thiokol tube.
91020-2 PIPE EXTENSION.
622702-6 SIPHON HOSE - 25.4 mm I.D.
hose with stainless steel fittings.
622702-10 SIPHON HOSE - 25.4 mm I.D.
hose with stainless steel fittings.
622701-6 SIPHON HOSE - 25.4 mm I.D.
hose with carbon steel fittings.
651851 Drum Cover
or 20 liters container.
651852 or 65963 Drum
COVER or closed drum
with 2” bung opening.
Stainless Steel
Stub Pumps
Stainless Steel
Stub Pumps
Carbon Steel
Stub Pumps
Hose Fluid Fluid
Length Outlet Inlet
mm
NPT
NPT
1.8
3/4(M)
–
1.8
3/4(M)
–
1.8
1(M)
1(M)
3
1(M)
1(M)
1.8
1(M)
1(M)
Inlet Asseccories
Model
91020-1
91020-2
651830
66480
66480
66717
94254
94256
67140-1
54
Used with
67140-1
Description
PIPE EXTENSION - 1/2” I.D. galvanized suction tube for 20 liters containers.
PIPE EXTENSION - 1/2” I.D. galvanized suction tube for 200 liters containers.
SCREEN ASSEMBLY - Adapts to 91020-1 or -2 PIPE EXTENSION. Keeps foreign matter
from entering lower pump end.
FILTER AND CHECK VALVE ASSEMBLY - 316 stainless steel assembly has 1” NPT (F)
connections and 40 mesh screen. 121 mm long x 54 mm in diameter.
Used with suction tubes when fluid is corrosive and viscosity requires a foot valve for
positive priming.
PIPE EXTENSION - Constructed of P.V.C. for Series 200, 300, 325 and 425 Stainless Steel
Stub Pumps. Adapts pump to 200 liters capacity.
STAINLESS STEEL SIPHON TUBE - For 20 liters containers, used with Integrity Pumps.
Includes 406 mm wand and 127 mm of 3/4” hose.
RAMS
For use with materials over 200,000 CPS viscosity. Consists of two 3-1/2”
diameter air cylinders joined by cross-over tubes and welded to a steel
base. Cast aluminum follower plate has double edge Buna N wiper to clean
drum and seal material from atmosphere.
Base
Raised height
Lowered position height
991 mm x 610 mm
2.5 m
1.6 m
Mounting footprint is strictly a reference letter used to simplify the matching of
pumps to follower plates and related accessories. (i.e. pump with “A” mounting
footprint will fit any accessory with “A” mounting footprint.
651616-X
Model
Plate Style
Container
Liters
Mounting
Footprint
Coating
Wiper Type
Wiper Material
66516
66516-1
66516-2
66517
66517-1
66517-2
67195-2
67195-1
67195-3
67196-2
67196-1
67196-3
66516-6
66516-7
66517-5
66517-6
66517-7
67195-6
67195-5
67195-7
67196-6
67196-5
67196-7
Flat
Flat
Flat
Flat
Flat
Flat
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Flat
Flat
Flat
Flat
Flat
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
A
A
A
B
B
B
A
A
A
B
B
B
A
A
B
B
B
A
A
A
B
B
B
None
None
None
None
None
None
None
None
None
None
None
None
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Teflon
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Tube Type
Tube Type
Tube Type
Tube Type
Tube Type
Tube Type
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Tube Type
Tube Type
Tube Type
Tube Type
Tube Type
Tube Type
Nitrile
Polyurethane
EPR
Nitrile
Polyurethane
EPR
EPR
Nitrile
Viton
EPR
Nitrile
Viton
Polyurethane
EPR
Nitrile
Polyurethane
EPR
EPR
Nitrile
Viton
EPR
Nitrile
Viton
Accessories
651616-1
651616-2
651616-3
651616-4
651616-5
651616-6
651616-13
651616-14
651616-15
651616-16
651616-17
651616-18
651616-52
651616-53
651616-54
651616-55
651616-56
651616-57
651616-58
651616-59
651616-60
651616-61
651616-62
Follower
Pump / Drum Stabilizing Brackets
Model
Description
Used With Follower Plate
Used With
66353-1 Pump Stabilizing Brackets - Attaches
8”, 10”, 12”
_
easily to 651616 Ram. Kit includes
Air Motor Pumps
hardware.
66354-1 Pump Stabilizing Brackets - Same as
41⁄4” & 6”
_
66353-1 except fits smaller pumps.
Air Motor Pumps
67133
Drum Hold-Down Brackets _
_
Kit includes 2 brackets, clamp screws,
nuts. Used with 651616-XX.
66354-1
67133
55
Extra Heavy-Duty Rams
200 liters Containers
Features 5-1/2” diameter post construction capable of delivering
0-0,8 bar follower down force. This extra measure of down force makes
the 651612 Ram the best choice for the hard-duty supply of heavy inks,
RTV silicones, caulkings, varnishes, highly viscous adhesives and much
more. Drum hold down bracket included.
* WARNING: Before using maximum follower down force, check container or consult container manufacturer for maximum pressure rating.
651612-X
Accessories
Model
651612-1
651612-2
651612-3
651612-4
651612-5
651612-6
651612-7
651612-10
651612-11
651612-12
651612-59
651612-9
Follower
Plate Style
66516
66516-1
66516-2
66517
66517-1
66517-2
66517-2
67196-2
67196-1
67196-3
67195-7
67195-3
Flat
Flat
Flat
Flat
Flat
Flat
Flat
Tapered
Tapered
Tapered
Flat
Flat
Container
Liters
200
200
200
200
200
200
200
200
200
200
200
200
Mounting
Footprint
A
A
A
B
B
B
B
B
B
B
A
A
Coating
Wiper Type
Wiper Material
None
None
None
None
None
None
None
None
None
None
Teflon
Teflon
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Double Lip
Tube Type
Tube Type
Tube Type
Tube Type
Tube Type
Nitrile
Polyurethane
EPR
Nitrile
Polyurethane
EPR
EPR
EPR
Nitrile
Viton
Viton
Viton
Single Post Rams
Provides responsive pump lifting and pump lowering – with sufficient
downforce to permit pump extrusion of materials up to 500,000 c.p.s.
It’s ability to revolve 360-degrees allows the ongoing placement and
rotation of three, 200 liters containers - a critical feature in applications
that demand continuous material supply.
651614-2
(Pump, Follower, and
Follower Assist Kit sold
separate)
56
651614-1
(Pump sold separate)
Model
Fits
Height
Height
Air
Number
ARO Pump
Raised Lowered
Inlet
651614-1
4-1/4”-6” Air Motors
2,80m
1,60m
1/4” NPT
651614-2
8” to 12” Air Motors
2,80m
1,60m
1/4” NPT
651614-3
Small Hydraulic Motor 2,80m
1,60m
1/4” NPT
651614-4
Large Hydraulic Motor 2,80m
1,60m
1/4” NPT
The above models include the brackets and hardware needed to
accommodate two-ball or extrusion tie-rod style pumps.
65116
Follower Plate Air Assist Kit - Air assist valve supplies ai
pressure to bottom of follower to aid in bringing follower
to top in less time. Kit includes valve, hose and necessary
mounting hardware.
Follower Plates 20 liters Containers
Mounting footprint is strictly a reference letter used to simplify the matching of pumps to follower plates and related accessories. (i.e. pump
with “A” mounting footprint will fit any accessory with “A” mounting footprint.
Model
651842-1
66732-1
66469
Coating
Wiper Type
Wiper Material
66469
Carbon Steel
None
Single Lip
Nitrile
66731
66731-1
Carbon Steel
Carbon Steel
Electroless Nickel
Electroless Nickel
Single Lip
Double Lip
Nitrile
Polyurethane
66731-2
66732
Carbon Steel
Carbon Steel
Electroless Nickel
Electroless Nickel
Double Lip
Double Lip
EPR
Nitrile
66732-1
Carbon Steel
Electroless Nickel
Double Lip
Polyurethane
66732-2
Carbon Steel
Electroless Nickel
Double Lip
EPR
651840-1
Carbon Steel
None
290-mm Single Lip
651840-2
Carbon Steel
None
651840-3
Carbon Steel
None
651841-1
Stainless Steel
None
295mm. Designed
for metric pails
311.9mm. Designed
for metric pails.
290-mm
Polyethylene/
Urethane
Nitrile
651842-1
Stainless Steel
None
290-mm
Polyethylene/
Urethane
Polyethylene/
Urethane
Polyethylene/
Urethane
Ram/Lift
Mounting
Used With
Footprint
651614-1, 651616-X
A
651615-C Rams,640169
651615-C Rams
C
651614-4, 651616
C
& 651615-C Rams
651614-1, 651615-C Rams
C
651614-1, 651615-C Rams
A
651612-X
651614-1, 651615-C Rams
A
651612-X
651614-1, 651615-C Rams
A
651612-X
651615-C Rams
C
67075-X, 65778 Lift
651615-C Rams
C
67075-X, 65778 Lift
651615-C Rams
C
67075-X, 65778 Lift
651615-C Rams
C
67075-X, 65778
651615-C Rams
D
Accessories
Material
Pump Follower / Floor Stand Adapters / Seal Protectors
Model
67134
Description
Follower Plate Adapter - For attaching
NM2322X-X & 6712X-P43 pumps to
200 liters follower plates or floor stands
67136
Follower Plate Adapter - For attaching
Integrity pumps to follower plates or
floor stand. Includes stainless steel
adapter w/2” NPT(F) threads, seal and
hardware.
91363-10
Seal Protectors - Package of 10 for 200
liters followers to be inserted between
the follower plate and the material in the
container. This helps to prevent
corrosive materials from attacking the
wiper and reduces clean-up time.
200 liters
Follower Plates
_
Seal Protectors - Package of 10 for 20 liters
followers to be inserted between the follower
plate and the material in the container. This
helps to prevent corrosive materials from
attacking the wiper and reduces clean-up time.
20 liters
Follower Plates
_
91364-10
Ram Used With
Mounting Footprint
66516-X & 6719X-X Followers
C
651616-1, -2, -3, 651614-X
and 651612-X Rams,
65138 Floor Mount
66248 & 66516
A
Followers.
651616-1, -2, -3 Rams
65138 Floor Mount
67136
57
pumps to follower plates and related accessories. i.e. pump with “A” mounting
66516
66248
Accessories
Model
58
Material
Coating
Wiper Type
Wiper Material
66248
Carbon Steel
None
Single Lip
66248-1
Carbon Steel
None
Single Lip
Nitrile, Polyethylene
backup
Polyethylene
66516
Aluminum
None
Double Lip
Nitrile
66516-1
Aluminum
None
Double Lip
Polyurethane
66516-2
Aluminum
None
Double Lip
EPR
66516-5
Aluminum
Teflon
Double Lip
Nitrile
66516-6
Aluminum
Teflon
Double Lip
Polyurethane
66516-7
Aluminum
Teflon
Double Lip
EPR
66517
Aluminum
Teflon
Double Lip
Nitrile
66517-1
Aluminum
Teflon
Double Lip
Polyurethane
66517-2
Aluminum
Teflon
Double Lip
EPR
66517-5
Aluminum
Teflon
Double Lip
Nitrile
66517-6
Aluminum
Teflon
Double Lip
Polyurethane
66517-7
Aluminum
Teflon
Double Lip
EPR
Ram
Lift Used With
651614-X Ram
640169 Lift
651614-X Ram
640169 Lift
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
651614-X
651616-X Rams
651612-X
Mounting
Footprint
A
A
A
A
A
A
A
A
B
B
B
B
B
B
6719X-X
Material
Coating
Wiper Type
Wiper Material
67195-1
Aluminum
None
Tube Type
Neoprene
67195-2
Aluminum
None
Tube Type
EPR
67195-3
Aluminum
None
Tube Type
Viton
67195-5
Aluminum
Teflon
Tube Type
Neoprene
67195-6
Aluminum
Teflon
Tube Type
EPR
67195-7
Aluminum
Teflon
Tube Type
Viton
67196-1
Aluminum
None
Tube Type
Nitrile
67196-2
Aluminum
None
Tube Type
EPR
67196-3
Aluminum
None
Tube Type
Viton
67196-5
Aluminum
Teflon
Tube Type
Nitrile
67196-6
Aluminum
Teflon
Tube Type
EPR
67196-7
Aluminum
Teflon
Tube Type
Viton
Ram
Lift Used With
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
651614-X
651616-X
651612-X
Mounting
Footprint
A
A
A
A
A
A
B
B
B
B
B
Accessories
Model
B
59
High Pressure - Fluid Regulators
The ARO I.D.L.® Fluid
Regulator features smooth,
consistent pressure regulation
with easy-turn adjustment.
Patented easy-access seat plug
permits immediate service
access to the regulator’s ball
and seat. Patented “floating”
ball and seat design maintains
proper regulation, even during
significant fluctuations in line
pressure.
Downstream Regulator
Model
Base
Housing
Seat
Reg. Pressure
Range
Bars
Maximum
Inlet
Pressure
Bars
28-86
69-207
28-86
69-207
207
414
207
414
28-86
69-207
28-86
69-207
207
414
207
414
52-172
138-345
52-172
414
414
414
3/8" ports, standard flow to 11,4 liters
651780-A1A-B
651780-A1B-B
651780-A3A-B
651780-A3B-B
C/S
C/S
S/S
S/S
T/C
T/C
T/C
T/C
3/8" ports, high-flow to 22,7 liters
651780-B1A-B
651780-B1B-B
651780-B3A-B
651780-B3B-B
C/S
C/S
S/S
S/S
T/C
T/C
T/C
T/C
3/4" ports, mastic-flow to 75,7 liters
651780-CAB-B
651780-C1C-B
651780-C3B-B
C/S
C/S
C/S
T/C
T/C
T/C
3/8" ports, remote models, high flow to 22,7 liters
651780-B1R-B
651780-B3R-B
C/S
S/S
T/C
T/C
14-345
14-345
414
414
Accessories
3/4" ports, remote models, mastic-flow to 75,7 liters**
3/4” Ports
Model
651780-C1R-B
651780-C3R-B
C/S
S/S
T/C
T/C
14-345
52-345
414
414
Seat
Reg. Pressure
Range
Bars
Maximum
Inlet
Pressure
Bars
7-207
7-207
207
207
**Flow rates tested in 55 CPS material
Backpressure Models
Model
Base
Housing
3/8" ports, high- flow to 22,7 liters
High Pressure Remote 651781-B1B-1
651781-B3B-B
Model
C/S
S/S
T/C
T/C
3/4" ports, backpressure models, mastic-flow to 75,7 liters**
651781-C1B-B
651781-C3B-B
C/S
S/S
T/C
T/C
7-207
7-207
Code
T/C
3/S
Z0
Description
Tungsten Carbide
300 Series Stainless Steel
Zinc
Material Codes
Code
C/S
S/S
Z/A
60
Description
Carbon Steel
Stainless Steel
Zinc Aluminum
207
207
Low Pressure - Fluid Regulators
Downstream Regulators
Model
Base
Housing
Seat
Reg. Pressure
Range
Bars
Working
Pressure
w/Gauge
bars
Inlet
Pressure
Gauge
Pressure
Range
8.3
8.3
41.3
41.3
8.3
8.3
41.3
8.3
8.3
41.3
51.7
51.7
51.7
51.7
51.7
51.7
51.7
34
34
34
0-4
0-7
0-20
0-20
0-4
0-4
0-20
0-4
0-4
0-20
41.4
86.2
41.4
86.2
41.4
86
86
86
86
34
0-20
0-69
0-20
0-69
0-20
51.7
51.7
-
34
-
-
Working
Pressure
w/Gauge
bars
Inlet
Pressure
Gauge
Pressure
Range
14
55
14
55
14
0-20
55
14
55
0-20
14
14
0-20
14
3/8”ports, standard flow to 11.4 liters
651790_A1B_B
651790-A1B-B
651790-A1D-B
651790-A2D-B
651790-A3B-B
651790-A3C-B
651790-A3D-B
651790-A4B-B
651790-A4C-B
651790-A4D-B
Z/A
Z/A
Z/A
S/S
S/S
S/S
S/S
S/S
S/S
S/S
T/C
T/C
T/C
4/S
T/C
T/C
T/C
3/S
3/S
3/S
0-2
0-2
3.4-14
3.4-14
0-2
1.3-4.1
3.4-14
0-2
1.3-4.1
3.4-14
The ARO I.D.L.® Fluid
Regulator features smooth,
consistent pressure regulation
with easy-turn adjustment.
Patented easy-access seat plug
permits immediate service
access to the regulator’s ball
and seat. Patented “floating”
ball and seat design maintains
proper regulation, even during
significant fluctuations in line
pressure.
3/8”ports, high flow to 22.7 liters
651790-B1D-B
651790-B1E-B
651790-B3D-B
651790-B3E-B
651790-B4D-B
Z/A
Z/A
S/S
S/S
S/S
T/C
T/C
T/C
T/C
3/S
2-14
7-55
2-14
7-55
2-14
Gauge included
3/8”ports, remote models, flow to 11,4 liters
651790-A1R-B Z/A
651790-A3R-B* S/S
T/C
T/C
2-14
2-14
34
34
3/8” Ports
Model
651790-B4R-B
S/S
3/S
2-14
Accessories
3/8”ports, remote models, flow to 22,7 liters
*Gauge NOT included
**Flow rates tested in 30 wt. Oil
Model
Base
Housing
Seat
Reg. Pressure
Range
Bars
1 1/4” Ports Model
3/8”ports, high -flow to 22,7 liters
651791-B1D-B
651791-B1E-B
651791-B3D-B
651791-B3E-B
651791-B4D-B
Z/A
Z/A
S/S
S/S
S/S
T/C
T/C
T/C
T/C
3/S
0-14
0-55
0-14
0-55
0-14
0-69
0-20
0-69
Low-Pressure
Remote Model
1-1/4”ports, system-flow to 70 liters
651791-C3D-B
651791-C4D-B
S/S
S/S
T/C
3/S
0-14
0-14
0-20
**Flow rates tested in 55 CPS material
Model
27500-000
27500-100
27500-200
27500-400
Inlet Regulated
Materials of Construction
bars
bars Bonnet Ball Seat
Pin. Dia.
52
9
Z
T/C T/C
T/C T
52
3
Z
T/C T/C
T/C T
52
17
Z
T/C T/C
T/C T
52
2
Z
T/C T/C
T/C T
Gauge Gauge (order
Inlet NPT separately)
1/4 (F)
93504-1
1/4 (F)
65107
1/4 (F)
93504-1
1/4 (F)
93769
27520-200
61
Measuring Cylinder System
Utilize ARO pumps, measuring cylinders, a manual 4-way fluid control valve, standard hoses and dispensing valves. Shifting the control valve in either direction will
allow the cylinder to fill to a pre-set volume.
ARO® metered pumping systems provide an economical method of dispensing fluids into containers or batch processes in desired quantities. Among the many benefits these systems offer are increased productivity. Improved accuracy, and
decreased product waste. As always, your ARO representative is prepared to discuss your metering system needs.
Suggested System Components
•Aro Pump
•Flow Gun (Dispensing Valve)
•Airline Filter, Regulator, Lubricator
Select from
this catalog.
•Measuring Cylinder - see below for details
•4-way Control Valve - see below for details
Filter/Regulator/Lubricator
Air Inlet
Flow Gun (Dispensing Valve)
4-Way Control Valve
Accessories
Measuring Cylinder
Accuracy
The measuring cylinder system has a consistant accuracy rate of + 2%,
depending on material characteristics.
Pump Assembly
Measuring Cylinders
665006
665007
665008
Measures 0 to 113 cm3, 241 mm long, 76,20 mm wide and
105 mm high. Dispenses predetermined quantities of fluid
or semi-fluid material. 345 bars pressure, 1/4 inch NPTF.
Constructed of carbon steel with neoprene seals & Buna-N
O-rings.
105 mm high. 345 bars pressure rating.
105 mm high. 345bars pressure rating.
665008
Manual Control Valve
665009
Four-way control valve for ARO measuring cylinders.
Pressurerating up to 345 bars All steel consturction. 235 mm high,
228 mm long, 63,5 mm wide, 1/4” NPTF inlet and outlet.
665009
62
Automatic Extrusion Guns
Model
Number
Description
Pumps
Used With
*651511
3/8 .250 (6) &
NPT 11/16-16
(F) (2)
(M)
(2)
1/8 F
Working
Pressure
Bars
3.4
at
138 bars
fluid
pressure
651511
1/4 .093 (2.3)
NPS & 11/16-16
(M)
(M)
1/8
(F)
3.4
at
138 bars
fluid
pressure
651513
3/8
NPT
(F)
(2)
1/4
NPS
(F)
(2)
1/8
NPT (F)
3/8
NPT
3/8
18 (M)
(2)
1/8
Accessories
Flow Gun - Requires
345
4-way air valve to open
and close. Adjusting
screw varies stroke length.
Secures to 1/2” diameter
rod by allen screw.
Aluminum body with
tungsten carbide seats.
Order 66541-XX Extrusion
Nozzle Kit separately.
651513-11-B Flow Gun - Has air
345
open, spring return
actuator. Requires
3-way air valve to open.
Adjusting screw varies
stroke length. Secures
to 1/2” diameter rod
by allen screw. 316
stainless steel with
tungsten carbide seat.
651535-2
Snuff-Back Gun - High
345
flow automatic dispensing
gun is designed to handle
high-viscosity materials.
Requires a 4-way air valve
to open and close.
651537-1
Flow Gun - Similar to
345
651511 except with carbon
steel body tungsten carbide
ball and seat.
Port Size
In. NPT
3.4
at
138 bars
fluid
pressure
Manual Extrusion Guns
Model
Number
*651500
651533
641523-1
Description
Max Fluid
Fluid Inlet
Fluid Outlet
Pressure Bars In. mm ID & Thread mm
Flow Gun - Aluminum body with
517
3/8 (F)
6&
tungsten carbide seats.
11/16-16 (M)
Flow Gun - Wetted parts of 316
345
1/4
2.3 &
series stainless steel with tungsten
NPT (M)
11/16-16 (M)
carbide seats.
Flow Gun - Wetted parts of 300
207
3/8 (F)
6&
Series stainless steel with Teflon
1/4 NPT(F)
packings. Order 76751 Adapter
and 66541-XX Extrusion
651500
651533
*WARNING: Do not use with halogenated hydrocarbons. This model contains aluminum parts that
come in contact with the material being dispensed. Aluminum is not compatible with
halogenated hydrocarbon solvents.
641523-1
(Shown with 66541-XX)
63
Extrusion Gun Nozzle Kits
76751
Adapter - 1/4NPT(M) to 11/16-16(M) adapts 66541-XX Extrusion Nozzle Kit
to fluid outlet for 641523-1 Flow Gun.
66541-XX Extrusion Nozzle Kit - Used on manual or automatic extrusion guns.
Hardened steel assembly includes nozzle and cap. 11/16-16 UN(F).
66541-XX
Model
66541-3
66541-4
66541-6
Ø Orifice mm
0.08
1.2
1.6
Model
66541-9
66541-12
66541-15
Ø Orifice mm
2.4
3.2
4.0
Model
66541-17
66541-18
66541-25
66541-37
Ø Orifice mm
4.4
4.7
6.4
9.5
Automatic Airless Spray Guns
Model
Number
Description
651511-1
SPRAY GUN - Requires
345
4-way air valve to open
& close. Adjusting screw
varies stroke length. Secures to 1/2” diameter rod
by Allen screw. Aluminum
body with tungsten carbide
seats. Includes 66504 TIP
GUARD and NUT. Order
TC-XXX SPRAY TIP
separately. See page 69
SPRAY GUN - Has air
345 1/4 NPS(M)
2.3
open, spring return
&
cylinder. Requires 3-way air
11/16-16 (M)
valve to open. Adjusting
screw varies stroke length.
Secure to 1/2” diameter rod
by Allen screw. 316 Stainless
steel body with tungsten
carbide seat. Includes
66504 TIP GUARD and NUT.
Order TC-XXXX SPRAY TIP
SPRAY GUN - Same as
5000 1/4 NPS(M)
2.3
651513-12-B except it
(345)
&
has an air open, air return
11/16-16 (M)
cylinder, and requires a 4way air valve to open.
SPRAY GUN - Same as
345
(2) 1/4
2.3
NPS(M)
&
has extra fluid port so gun
11/16-16 (M)
can be used in recirculating
systems. Includes 66504
TIP GUARD and NUT.
Order TC-XXXX SPRAY TIP
SPRAY GUN - Same as
345
(2) 1/4
2.3
NPS(M)
&
has an air open, air return
11/16-16 (M)
cylinder and requires a 4way air valve to open.
Accessories
651511-1
651513-12-B
651513-12-B
651513-22-B
651514-12-B
651514-22-B
64
Max Fluid Fluid
Pressure Inlet
Bars
Inches
Fluid
Outlet I.D.
mm
& Thread
(2) 3/8
6
NPT (F)
&
11/16-16 (M)
Air Inlet
Outlet
mm
NPT
(2) 1/8 (F)
Min. Air
Pressure
to Open
Bars
3.4
at
138 bars
fluid
pressure
1/8 (F)
3.4
at
138 bars
fluid
pressure
1/8 (F)
3.4
at
138 bars
fluid
pressure
3.4
at
138 bars
fluid
pressure
1/8 (F)
1/8 (F)
3.4
at
138 bars
fluid
pressure
Manual Airless Spray Guns
Model
Number
Description
Max. Fluid
Pressure
Bars
345
651533
Fluid
Inlet
Inches
1/4
NPS(M)
SPRAY GUN – Wetted parts of 316
stainless steel with tungsten carbide
seats. Used to airless spray paints,
lacquers, and otherlight fluids. Includes
66504 TIP GUARD and NUT. Order TC-XXXX
SPRAY TIP separately.
*651500-1 SPRAY GUN – Aluminum body with
517
tungsten carbide seats. Used for airless
spraying material over 200,000 CPS.
Includes 66504 TIP GUARD and NUT.
Order TC-XXXX SPRAY TIPS separately.
Fluid Outlet I.D.
mm
& Thread
2.3 &
11/16-16 (M)
651533
3/8
NPT(F)
6&
11/16-16 (M)
*WARNING: Do not use with halogenated hydrocarbons. This model contains aluminum parts that come
in contact with the material being dispensed. Aluminum is not compatible with halogenated hydrocarbon
solvents.
Model
66504
65030-1-B SWIVEL-1/4 NPTM(M) x 1/4 NPSM(F). Swivels 360°.
No filter included. For SWIVEL and FILTER see model
numbers below.
65030-5-B 120 mesh Stainless Steel Filter
65030-9-B70 mesh Stainless Steel Filter
65809-X FILTER - 40 mesh Stainless Steel Filter. For finer mesh
screen, see below.
65809-3 200 mesh
65809-5 120 mesh
65809-9 70 mesh
65888-X PRE-ORIFICE - Accelerates fluid stream entering spray
tip to provide complete atomization. Mounts directly
behind TC-XXXX SPRAY TIP.
Model
65888-9
65888-13
65888-16
65888-20
65888-25
Orifice
Diameter
.009
.013
.016
.020
.025
Used with
All manual and automatic
SPRAY GUNS
651500-1
SPRAY GUNS
651500-1 SPRAY GUN
(To adapt 651551 to fit
651533, order: 76555 pilot,
92367 retaining nut. Y167-1
1/8(M) x 1/4 (F) adapter.
SPRAY GUNS
651555-B
Accessories
Description
TIP GUARD AND NUT - Secure TC-XXXX SPRAY TIP
SPRAY GUN. Guard is required on all airless
applications. Order SPRAY TIP separately.
651555-B QUICK CLEAN - Spray tip locked in operating
position until reversed with lever for cleaning.
For spraying heavy viscosity material.
Order TC-XXXX-D SPRAY TIP separately.
651551
QUICK CLEAN - Spray tip locked in operating
position until reversed with lever for cleaning.
For spraying heavy viscosity material.
Order TC-XXXX SPRAY TIP separately
65030-X SWIVEL
651551
SPRAY GUNS
Used with Spray Tips Having
These Equivalent Orifice
.007 or .009
.011
.013 or.015
.015 or.018
.018 or .021
65030-1
65
Airless Spray Tips
EQUIVALENT ORIFICE:
Airless tip orifices are elliptical in shape. The term
“equivalent orifice diameter”
refers to circular orifice diameter which will provide the
same flow rate as the elliptical
orifice. The equivalent orifice
diameter does not indicate
actual orifice dimensions.
PATTERN WIDTH: This
dimension is the nominal
pattern width of each tip
when tested on a coating
material of 20 seconds –
No.4 Zahn cup viscosity at
104 bars at a 12” distance
from the tip.
FLOW RATE IN l/mn: The
flow rates of ARO airless tips
are given as l/mn on water at
pressures shown:
Capacities will vary to some
degree on other materials.
Model
Number
-D
Models
Equiv.
Orifice
Pattern
Width
mm
TC540
–
.005
178
0.06
0.08
0.10
0.11
TC715
–
.007
76
0.11
0.15
0.19
0.23
TC925
-D
.009
140
0.15
0.23
0.25
0.30
TC950
–
.009
216
0.15
0.23
0.25
0.30
TC965
–
.009
254
0.15
0.23
0.25
0.30
TC1115
-D
.011
76
0.23
0.30
0.38
0.46
TC1125
-D
.011
140
0.23
0.30
0.38
0.46
TC1140
-D
.011
178
0.23
0.30
0.38
0.46
TC1150
-D
.011
216
0.23
0.30
0.38
0.46
TC1165
-D
.011
254
0.23
0.30
0.38
0.46
TC1180
–
.011
292
0.23
0.30
0.38
0.46
TC1325
–
.013
140
0.34
0.46
0.57
0.68
TC1340
-D
.013
203
0.34
0.46
0.57
0.68
TC1350
-D
.013
229
0.34
0.46
0.57
0.68
TC1365
-D
.013
227
0.34
0.46
0.57
0.68
TC1380
-D
.013
330
0.34
0.46
0.57
0.68
TC1525
-D
.015
152
0.46
0.61
0.38
0.87
TC1540
-D
.015
208
0.46
0.61
0.38
0.87
TC1550
-D
.015
254
0.46
0.61
0.38
0.87
TC1565
-D
.015
305
0.46
0.61
0.38
0.87
TC1580
-D
.015
356
0.46
0.61
0.38
0.87
TC1595
–
.015
394
0.46
0.61
0.38
0.87
TC1825
-D
.018
152
0.68
0.95
1.14
1.37
Accessories
TC1840
.018
216
0.68
0.95
1.14
1.37
Model Number Significance
TC1850
-D
.018
254
0.68
0.95
1.14
1.37
TC
15
65
-D
TC1865
-D
.018
330
0.68
0.95
1.14
1.37
TC1880
-D
.018
381
0.68
0.95
1.14
1.37
TC1895
–
.018
432
0.68
0.95
1.14
1.37
TC2095
–
.020
457
0.76
1.06
1.33
1.52
TC2140
-D
.021
216
0.91
1.25
1.56
1.79
= Tungsten Carbide
= .015 Orifice Diameter
= 65° Spray Pattern
= Tips are for use with
651555-B Quick Clean
only
TC2150
-D
.021
292
0.91
1.25
1.56
1.79
TC2165
-D
.021
381
0.91
1.25
1.56
1.79
TC2180
-D
.021
432
0.91
1.25
1.56
1.79
TC2440
-D
.024
229
1.14
1.60
1.98
2.28
TC2465
–
.024
381
1.14
1.60
1.98
2.28
TC2480
–
.024
470
1.14
1.60
1.98
2.28
TC2495
–
TC2625
.024
533
1.14
1.60
1.98
2.28
.026
178
1.33
1.90
2.32
2.70
TC2650
-D
.026
305
1.33
1.90
2.32
2.70
TC2665
-D
.025
381
1.33
1.90
2.32
2.70
TC2680
-D
.026
470
1.33
1.90
2.32
2.70
TC2695
–
.026
533
1.33
1.90
2.32
2.70
TC2965
-D
.029
381
1.71
2.39
3.04
3.42
TC2995
–
.029
546
1.71
2.39
3.04
3.42
TC3140-D
-D
.031
229
2.01
2.85
3.50
4.18
TC3195
–
.031
546
2.01
2.85
3.50
4.18
TC3640
-D
TC3650
66
Flow rate liters/mn @ Fluid Bars
35
69
103
138
.036
229
2.70
3.80
4.56
5.32
.036
305
2.70
3.80
4.56
5.32
TC3680
–
.036
470
2.70
3.80
4.56
5.32
TC4195
–
.041
546
3.34
4.56
5.70
6.84
TC4340
–
.043
229
4.18
5.70
6.84
7.98
TC4365
–
.043
381
4.18
5.70
6.84
7.98
TC4895
–
.048
559
4.56
6.46
7.98
9.50
TC5240
–
.052
229
5.32
7.60
9.12
10.64
TC5265
–
.052
381
5.32
7.60
9.12
10.64
TC6265
–
.062
381
7.98
11.40
14.06
15.96
TC7265
–
.072
381
10.64
15.20
18.62
15.96
TC8565
–
.085
381
15.58
21.66
25.46
30.82
Fluid Heaters
Model
Number
651747-X-B
Volt
AC
AMPS
Heater
Wattage
Heater
Accuracy
(Celcius)
Temp.
Recovery Working
fluid
Rise
Rate
Pressure Inlet &
Above
Liters
bars
Outlet
Ambient per Hour
NPT
(Celcius)
Cast aluminum with stainless steel fluid passages. Externally adjustable thermostat is variable
from 15 C° to 120 C°. Explosion proof construction for Class I, Group D hazardous
environments. CSA approved.
651747-1-B
120 16.6
2000
±1.9°
38°
56.8
345
1/2 F
651747-2-B
240
8.3
2000
±1.9°
38°
56.8
345
1/2 F
651747-3-B
440
4.5
2000
±1.9°
38°
56.8
345
1/2 F
651747-2-M* 240
8.3
2000
±1.9°
38°
56.8
345
1/2 F
*Atex Cenelec
Model
66258
Description
MOUNTING BRACKET - Bracket assembly with appropriate
mounting holes to affix heater to vertical substrate.
Model
Description
Number
Fluid
Inlet
NPT
1/2 (M)
66062
Thermometer Kit
Assembly Includes thermometer
and outlet block. Senses fluid temperature.
Used with
651747-X
FLUID HEATERS
Fluid
Outlet
NPT
1/2 (M)
Gauge
Port
NPT
1/4 (F)
Maximum
Working
Pressure bars
345
Used
With
Inlet
Port
Inches
3/4 PTF
short
female
Recirculating
Port
Inches
1/4 NPTF(F)
1/4 NPT(F)
(2) 1/4 NPSM
Inlet
Port
Inches
(2) 1/4
Recirculating
Port
Bars
221
Recirculating System
Model
Description
Number
661173
RECIRCULATING BLOCKPumps with
Used in recirculating systems
3/4” female
where material particles mustbe
Inlet
kept in suspension 3/4” NPTF (M)
thread inlet female to inlet of pump.
241 bars Max working pressure
WAY VALVE - Used on the return
Recirculating
leg of a recirculating system.
systems that
Can be used to (1) Evacuate air
are closed and
when introducing material into
circulating
the system. (2) Direct material back directly back
to the foot valve of the pump.
to the foot
(3) Flush system when changing
valve of the
material or clean up. Maximum
pump.
working pressure 276 bars.
Model
Description
Number
79244
Used
With
DOUBLE INLET ADAPTER
651533 Manual
Used in recir-culating systems
Spray Gun or NPS(M)
where material particles must be 651513 automatic
kept in suspension. Attaches
Spray Gun
directly to fluid inlet of gun with
single fluid inlet tube. Suggest use
of 65030-X Swivel between the gun
and Double Inlet Adapter forgreater
maneuverability. Connection to gun
is 1/4” NPS(F).
Accessories
91600
67
Material Filters
Model
Number
Maxi. fluid
Pressure Bars
Filter
Mesh Microns
Filter
Inlet(s) Size
NTP (Qty)
Filter
Outlet(s) Size
NTP (Qty)
1/4” fluid inlet/carbon steel construction
651412-X
651412
651412-8
345
345
70 200
100 149
1/4-F (2)
1/4-F (2)
1/4-F (3)
1/4-F (3)
Bottom swivel.
1/2” fluid inlet/stainless steel construction (passivated)
651422-40
651422-70
651422-100
414
414
414
40 375
70 200
100 149
1/2-F (2)
1/2-F (2)
1/2-F (2)
1/2-F (1)
1/2-F (1)
1/2-F (1)
1/2" fluid inlet/carbon steel construction (e-nickel plated)
651418-XX-B
651420-40
651420-70
651420-100
651421-70
414
414
414
414
40 375
70 200
100 149
Dual Screens
1/2-F (2)
1/2-F (2)
1/2-F (2)
1-8
1/2-F (1)
1/2-F (1)
1/2-F (1)
3/4-F (1)
1” fluid inlet/stainless steel construction (e-nickel plated)
651420-XX-B
651418-40-B
651418-70-B
651418-100-B
41
414
414
40 375
70 200
100 149
1-F (2)
1-F (2)
1-F (2)
Accessories
Material Filters Screens
93944-70
68
Model
91192-1
91192-2
91192-3
91192-4
93944-40
93944-70
93944-100
93945-40
93945-70
93945-100
Screen Mesh
40
70
100
200
40
70
100
40
70
100
Filter Used With
651412
651412
651412
651412
651420 & 651422
651420 & 651422
651420 & 651422
651418
651418
651418
3/8-F (3)
3/8-F (3)
3/8-F (3)
Air filter/Regulator/Lubricator
Model
Number
Description
Pumps
Used
With
Port Reg. Pressure Max.
Size
Range
Flow
NPT
bars
Pressure
Module/Air 1000TM F/R/L
C28121-800
C28121-800
P29122-600
2” & 3”, 1/4 (F)
Drop/fog-type lubrication,
air motor
20 micron filter,
pumps
polycarbonate bowl w/guard.
Filter/Regulator
2” & “N”, 1/4 (F)
air motors
20 micron filter,
polycarbonate bowl w/guard.
0.3-8.6
6 dm3/s
0.3-8.5
6 dm3/s
0.3-8.6
52 dm3/s
0.3-8.5
66 dm3/s
0.3-8.6
35 dm3/s
0.3-8.6
35 dm3/s
0.3-13.8
31 dm3/s
Module/Air 2000TM F/R/L
C28241-810
P29122-600
P29241-610
40 micron filter,
metal bowls w/ sight glass.
Filter/Regulator
40 micron filter,
metal bowls w/ sight glass.
41⁄4” & 1/2 (F)
6” air
motor
pumps
41⁄4” & 6” 1/2 (F)
air motors
F/R/L Assemblies
651729
C28241-810
65940
Accessories
651730
Kit Assembly
10”
3/4 (M)
Heavy-Duty FRL w/ hose
& 12”
& mounting bracket for
air motor
installation to Two Post
pumps
Ram.
Kit Assembly
8”
3/4 (M)
air motor
pumps
installation to Two Post Ram.
Kit Assembly
41⁄4” & 1/2 (M)
6” air
motor
installation to Two Post
pumps
Ram.
P29241-610
69
Module/Air 3000 Piggyback Lubricator
• The Module/Air 3000 Heavy-Duty Series units extend the life of air operated equipment
while reducing operating costs. These units efficiently remove solid particles from
compressed air lines-making them the perfect choice for large flow applications.
• Polycarbonate bowl with metal guard standard.
• Automatic drain has pipe connection for draining away contaminants.
• Push-pull, non-rising adjustment knob.
• Bracket and Gauge comes standard with all units.
Piggyback
Ordering Information
Piggyback/Lubricator
Combo
Model
P29351-600
P29351-604
C28351-600
100067
104282
104283
104284
104285
104286
104287
Description
Piggyback, 3/4” NPT, w/Gauge & Bracket
Piggyback, 3/4” NPT, w/Gauge, Bracket & Auto Drain
Piggyback/Lube Combo, 3/4” NPT, w/Gauge & Bracket
Gauge, 0-11 bars
Bracket
Auto Drain
Filter Element, 40 Micron (Standard)
Filter Element, 5 Micron
Filter Bowl
Lubricator Bowl
4.31
3.52
Accessories
Module/Air 3000 Piggyback Lubricator
Performance Specifications
Construction
Material
Filter Element
Temperature Range
Pressure Range
Max. Pressure
Max. Flow Rate
Media
Bowl Capacity
Seals
Weight
Piston Type Regulation
Body/Aluminum Die-Cast - Bowl/Polycarbonate
40 Micron (Standard)
-10 to 60 C°
0.4 to 11.7 bars
11.7 bars
Piggyback, 141 l/s - Lubricator, 151 l/s
Compressed Air
Filter, 298 g. - Lubricator, 227g.
Buna-N
Piggyback-Lube, 2105 g - Piggyback, 1360 g
3.39
0.43
IN
3.39
(86)
OUT
10.35
(263)
4-M5.0*PO.8
DRAIN
DRAIN
7.05
7.05
6.26
1/4” NPT (2)
4.35
(110.5)
1/4” NPT (2)
UNF 1/2-20
AUTODRAIN
7.83
4-M5.0*PO.8
4-M5.0*PO.8
1/4” NPT (2)
1/4” NPT
3.39
IN
0
3.39
IN
OUT
10.35
10.35
70
2-Way Solenoid/Pilot Acting Valves
Model
Number
TB03EB-024-D
TB03EB-120-A
TB04EB-024-D
TB04EB-120-A
TB06EB-024-D
TB06EB-120-A
Port Cv Voltage
Size
3/8” 4.5 24 DC
3/8” 4.5 120 AC
1/2” 4.5 24 DC
1/2” 4.5 120 AC
3/4” 12.0 24 DC
3/4” 12.0 120 AC
2”
3” 4-1/4” 6”
•
•
•
•
•
•
8” 10” 12”
•
•
•
•
•
•
•Normally Closed
•Brass Body
•Stainless Steel Steel
•Spring Return
•Connector Option Include
CSN-30 or CHW-30
•
•
Nota : See page 75 for cable connectors
2-Way Direct Acting Solenoid Valves
Model
Number
TB022B-024-D
TB022B-120-A
TB035B-024-D
TB035B-120-A
TB045B-024-D
TB045B-120-A
TB066B-024-D
TB066B-120-A
Port
Size
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
Cv
Voltage
2”
.18
.18
4.0
4.0
4.0
4.0
8.6
8.6
24 DC
120 AC
24 DC
120 AC
24 DC
120 AC
24 DC
120 AC
•
•
3” 4-1/4” 6”
•
•
•
•
•
•
8” 10” 12”
•
•
•
•
•
•
•
•
•Normally Closed
•Brass Body
•Stainless Steel Stem
•Spring Return
•Connector Options include
CSN-30 or CHW-30,
exception 1/4”valve which
uses CSN or CHW.
•
•
3-Way Solenoid Actuated Valves
Port
Size
1/4”
1/4”
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
3/4”
Cv
Voltage
2”
.2
.2
1.5
1.5
2.2
2.2
2.4
2.4
7.5
7.5
24 DC
120 AC
24 DC
120 AC
24 DC
120 AC
24 DC
120 AC
24 DC
120 AC
•
•
3” 4-1/4” 6”
8” 10” 12”
•
•
•
•
•
•
•Normally Closed
•Aluminum Body
•Spring Return
•Connector Options include
CSN-30 or CHW-30 for
CAT66-P, or CSN or CHW
for all others
•
•
•
•
CAT66P
MQ3728
Accessories
Model
Number
CAT66P-024-D
CAT66P-120-A
MQ3728-024-D
MQ3728-120-A
H253SS-024-D
H253SS-120-A
H254SS-024-D
H254SS-120-A
MQ3729-024-D
MQ3729-120-A
MQ3729
•
•
•
•
H253SS
•
•
Air Control Needle Valves
Model
Number
104104-NS2
104104-N02
104104-N04
104104-N06
Port
Size
1/4”
1/4”
1/2”
3/4”
Cv
2”
3” 4-1/4” 6”
•
•
•
•
4.5
4.5
•
8” 10” 12”
•
•
•
•Composite Body
•Can be Panel Mounted
•Infinite Control Settings
•Corrosion-Resistant
Stainless Steel Insert
& Stem
•
104104-N02
Lock-Out Valves/Hasp
Model
Number
104253-2*
104174-2
104174-4
100085 (Hasp)
Port
Size
1/4”
1/4”
1/2”
1/2”
*Safety lock-out for module air 1000
2”
3” 4-1/4” 6”
•
•
•
•
•
•
•
•
•
8” 10” 12”
•
•
•Meets OSHA lock-out /
tag-out regulations
•Installs upstream of air
filter / regulator unit
100085
•
104174
71
Connectors/Coils
Code
CSN
CSN-30
CHW
CHW-30
Description
Strain relief connector for 3-way valves
Strain relief connector for 2-way valves and CAT66P-XXX-X Valves
Molded cable connector for 3-way valves, 36” molded leads
Molded cable connector for 2-way valves and CAT66P-XXX-X, 36” molded leads
Code
116218-39
116218-33
119378-39
119378-33
Description
22 mm, 24 VDC Coil
22 mm, 120 VAC Coil
30 mm, 24 VDC Coil
30 mm, 120 VAC Coil
Typical Installation
Accessories
Lock-out Valve
with Hasp
Module Air 2000
Filter / Regulator
Air
Needle
Valve
Air
Needle
Valve
Solenoid-Actuated
Valve
Solenoid-Actuated
Valve
ARO Piston Pump
ARO Diaphragm Pump
Air line
Connection
Kit
72
Air line
Connection
Kit
Over-Run Controls
Model
Number
Description
635040
ARO-STOP® Valve
Shuts off air to the pump
when material container is
empty or line is broken.
Quick set and reset feature.
ARO-STOP® Valve
ARO-STOP® Valve
23644-400
635043
Pumps
Air
Used
Inlet
With
NPT
“N” Series, 1/4 (F)
air motor
pumps
only
Air
Outlet
NTP
1/4 (M)
Pressure
Range
Bars
1.4-12
41⁄4” &
6” air
motor
pumps
1/2 (F)
1/2 (M)
1.4-12
8’, 10”
& 12”
air motor
pumps
only
3/4 (F)
3/4 (M)
1.4-12
635040
Air Motor Mufler
Model
Description
Number
91790
92460
Air
Inlet
NPT
1-1/4 (M)
Size
mmXmm
1-1/4 (M)
143 x 391
10” & 12”
air motor,
pumps
Bolted-on
229 x 508
89 x 284
91790
92460
Accessories
66718
Air Motor Muffler
Reduces air exhaust noise level
to acceptable OSHA standards.
Air Motor Muffler
Air Motor Muffler
Pumps
Used
With
41⁄4” & 6”
air motor
pumps
8” air motor,
pumps
Wet Sol “Plus”
Model
Number
Description
66333-B
Wet Sol - 0,95 liter Container
Designed to prolong packing life by keeping
the piston rod and packings wetted. Also
reduces the possibility of material hardening
on the piston rod.
Wet Sol - 3,75 liters Container
66334-B
Pumps
Used
With
All pumps
with wet cups.
66718
66334-B
73
Accessories
Viscosity Conversion Chart
74
Centi
Poise
Poise
Saybolt
Universal
(SSU)
Saybolt
Furol
1
2
4
7
10
15
20
25
30
40
50
60
70
80
90
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
550
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
8500
9000
9500
10000
15000
20000
30000
40000
50000
60000
70000
80000
90000
100000
125000
150000
175000
200000
.01
.02
.04
.07
.10
.15
.20
.24
.30
.40
.50
.60
.70
.80
.90
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
4.0
4.2
4.4
4.6
4.8
5.0
5.5
6.0
7.0
8.0
9.0
10.0
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
150
200
300
400
500
600
700
800
900
1000
1250
1500
1750
2000
31
34
38
47
60
80
100
130
160
210
260
320
370
430
480
530
580
690
790
900
1000
1100
1200
1280
1380
1475
1530
1630
1730
1850
1950
2050
2160
2270
2380
2480
2660
2900
3380
3880
4300
4600
5200
5620
6100
6480
7000
7500
8000
8500
9000
9400
9850
10300
10750
11200
11600
14500
16500
18500
21000
23500
26000
28000
30000
32500
35000
37000
39500
41000
43000
46500
69400
92500
138600
185000
231000
277500
323500
370000
415500
462000
578000
694000
810000
925000
13
15
17
19
24
29
34
39
42
49
54
59
70
79
91
100
110
120
128
138
148
153
163
173
185
195
205
216
227
238
248
266
290
338
388
430
460
520
562
610
648
700
750
800
850
900
940
985
1030
1075
1120
1160
1450
1650
1850
2100
2350
2600
2800
3000
3250
3500
3700
3950
4100
4350
4650
6940
9250
13860
18500
23100
27750
32350
37000
41550
46200
57800
69400
81000
92500
Ford
No. 3
8
9
10
12
15
19
25
29
33
36
41
45
50
58
66
72
81
90
98
106
115
122
130
136
142
150
160
170
180
188
200
210
218
230
250
295
340
365
390
445
480
520
550
595
635
680
720
760
800
835
875
910
950
985
1230
1400
1570
1780
Warranty
Ford
No. 4
Zahn
No. 1
Zahn
No. 2
5
8
10
12
14
18
22
25
28
31
32
34
41
45
50
54
58
62
65
68
70
74
89
95
100
106
112
118
124
130
137
143
153
170
194
223
247
264
299
323
350
372
400
430
460
490
520
540
565
592
617
645
676
833
950
1060
1175
1350
1495
1605
1720
1870
2010
2120
2270
2360
2470
2670
30
34
37
41
44
52
60
68
72
81
88
16
17
18
19
20
22
24
27
30
34
37
41
49
58
66
74
82
88
Zahn
No. 3
All ARO Pumps are backed up by our famous 5-year warranty, as
a measure of the confidence we place in the quality of these
products. A confidence that you can share.
PUMP FIVE-YEAR WARRANTY
10
12
14
16
18
20
23
25
27
30
32
34
36
39
41
43
46
48
50
52
54
58
64
68
76
Ingersoll Rand/ARO warrants to the original use purchaser of
Ingersoll Rand/ARO manufactured pumps that Ingersoll
Rand/ARO will repair or replace, free of charges, including
return shipping costs within the Continental United States
of America, any such product which under normal use and
service proves defective in material or workmanship, as
determined by Ingersoll Rand/ARO Inspection, within FIVE YEARS
from date of shipment from Ingersoll Rand/ARO, provided the
claimed defective product, or part thereof, is promptly
returned to the Ingersoll Rand/ARO factory or Ingersoll
Rand/ARO authorized warranty repair center with transportation
prepaid.
This warranty does not cover failure of parts or components
due to normal wear or damage, which in the judgment of Ingersoll
Rand/ARO, arises from misuse, abrasion, corrosion, negligence,
accident, substitution of non-Ingersoll Rand/ARO parts, faulty
installation or tampering.
If Ingersoll Rand/ARO Inspection discloses no defect in
material or workmanship, repair or replacement and return
will be made at customary charges.
This warranty covers Ingersoll Rand/ARO manufactured
pumps shipped on or after July 4, 1988.
Equipment not covered by Ingersoll Rand/ARO warranty:
accessories or components of equipment sold by Ingersoll
Rand/ARO that are not manufactured by Ingersoll Rand/ARO
(such as switches, hoses, gasoline engines, etc.) are subject
to the warranty, if any, of their manufacturer. Ingersoll
Rand/ARO will provide the purchaser with reasonable
assistance in making such claims.
The foregoing warranty supersedes, voids and is in lieu of
all or any other warranties, express or implied, and no
warranty or merchantability or fitness for particular purpose
is intended or made. Ingersoll Rand/ARO's sole obligation and
the original use purchaser's sole remedy is as stated above
and in no event shall Ingersoll Rand/ARO be liable for any special,
direct, indirect, incidental, consequential or other damages,
or expenses of any nature including, without limitation, loss
of profits or production time incurred by the original use
purchaser or any other party.
Notes
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
...................................................................................................
UK & Ireland
Italy
Czech / Slovak Republic
Ingersoll-Rand Sales Company Ltd.
Productivity Solutions
Hindley Green
Wigan
Lancashire
WN2 4EZ
England
Tel: +44 (0)1942 257171
Fax: +44 (0)1942 503451
Ingersoll Rand italiana Spa
Strada Provinciale Cassanese 108
20060 VIGNATE, Milano
Italy
Phone: +39 02 9505 6261
Fax: +39 02 9536 0159
Ingersoll-Rand technical & Services
Ostrovskeho 34
151 28 PRAGUE,
Czech Republic
Phone: +420 2 57 109 756
Fax: +420 2 57 109 758
Germany & Central Europe
Poland
Ingersoll-Rand GmbH
Wilhelmstrasse 20
45478 Mülheim / Ruhr
Tel: +49 / (0)208 / 9994-0
Fax: +49 / (0)208 / 9994-445
www.ingersollrand.de
Ingersoll Rand
Nowiniarska 1 ap.1
PL 00-235 WARSAW,
Poland
Phone: +48 22 635 72 45
Fax: +48 22 635 73 32
Ingersoll Rand
Z.I. du Chêne Sorcier
78346 Les Clayes sous Bois
France
Tél.: +33 (0)1 30 07 68 00
Fax: +33 (0)1 30 07 69 80
Spain & Portugual
Ingersoll-Rand Ibérica
Tierra de Barros, 2
28820 - Coslada
Madrid
Spain
Tel: +(34) 91 6277405
Fax: +(34) 91 6277406
Nordic & Baltic Region
Ingersoll-Rand
Drammensveien 126A
0277 Oslo, Norway
Tel: +47 2255 1526
Fax: +47 2243 6581
Ingersoll-Rand Company SA
PO Box 123720
Alrode 1451
South Africa
Tel: +27 11 864 3930
Fax: +27 11 864 3954
Russia & CIS
Ingersoll Rand
Bld. 1, 32/1 Myasnitskaya Street
101990 MOSCOW,
Russia
Phone: +7 095 933 03 24
Fax: +7 095 785 21 26
www.irtools.com/aro
Distributed by :
Nothing contained within this brochure is intended to extend any warranty or representation, expressed
or implied, regarding the products described herein. Any such warranties or other items or conditions
of sale of products shall be in accordance with Ingersoll-Rand ' s standard terms and conditions of sale
for such products, which are available upon request. Product improvement is a continuing goal at
Ingersoll-Ra nd. Designs and specifications are subject to change without notice or obligation.
© 2006 Ingersoll-Rand Company - Form E52007 - CPN 00707315
Southern Africa
Conception/Réalisation/Impression : NPC Communication (CB) 01 30 41 95 63
France & Benelux

Ingersoll Rand/ARO Piston Pumps

Transcription

Similar documents

Piston Pumps

Ordering Accessories

ARO® Pro-Series Diaphragm and Piston Pumps

Pro Series Catalog

operator`s manual npc23xxxxr2-xx-x