modular bar die system

MODULAR BAR DIE SYSTEM
Exclusively For Advance Tabco’s Prestige Bar Equipment
PR-BARDIE
Contact Our SmartFab Department For Details & Pricing
800-645-3166 or [email protected]
Bartender’s Side: 20 Gauge, 302 Stainless Steel
Structure: 16 Gauge Galvanized Steel
• Die Wall Can Be Sealed To The Floor, Eliminating Moisture In The Bar Structure.
• Recessed Equipment Outlets Allow Bar Equipment To Be Flush
Against Bar Die Wall.
• GFI Outlets Set In Place (To Be Wired By Local Electrician To Meet Local Codes)
• Stainless Steel Panels Supplied Where Equipment By Others Is Located.
• Precise Engineering To Ensure An Exact Fit.
• Enclosed Casing For Beer Towers.
• Soda Gun Outlets Supplied (Location Must Be Specified).
• Cantilever System Made For Advance Tabco’s Prestige Bar Equipment,
Eliminating The Need For Legs.
• Pre-Defined Space For Plumbing And Drain Lines.
Stainless Steel
Underbar Fillers
Bolt On To Sides Of Equipment
Multiple Angles Available • Optional Legs
(See Page 101)
Contact SmartFab Department
For Details & Pricing
Flat Panel Section
w/ Recessed Outlet
Ice Bin Section
Cabinet Section
Bar Top And Drink Rail Can Be Fabricated
From Equipment Drawings Ahead Of Time.
Electrical
Conduit
Removable Panel
For Beer/Soda Line
Installation
Plumbing Lines
Drain
Conduit
Drain
Conduit
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.
Front Panels Can
Attach Directly To
Bar Die Structure.
© ADVANCE TABCO, DECEMBER 2014
REF-DD
MODULAR BAR DIE SYSTEM
Exclusively For Advance Tabco’s Prestige Bar Equipment
PR-BARDIE
Contact Our SmartFab Department For Details & Pricing
800-645-3166 or [email protected]
BBR-35
(Back Bar Refrigeration)
PRSJT-12-DR
BBR-35
(Trash Cabinet)
(Back Bar Refrigeration)
PRF-20-45ICM
PRF-20-45ICM
(60º Inside Corner)
(60º Inside Corner)
Floor Templates
Available
PRLR-18
PRPOS-18
(Liquor Display Rack)
(Point of Service
Cabinet)
PRHSST-24-12
(Hand Sink)
PRDSR-48
PRRS-19-12
(Blender Stations)
(Speed Rail)
PRC-19-48L-10
PRDSR-48
(Ice Bin & Storage Combo)
(Speed Rail)
PRRS-19-12
(Blender Stations)
PRF-20-45ICM
PRLR-18
(60º Inside Corner)
PRF-20-45ICM
GWHT-24
(Liquor Display Rack)
(60º Inside Corner)
(Glass Washer)
PRHSST-24-12
(Hand Sink)
PRWC-19-18
PRSJT-12-DR
(Dump Sink with Waste Chute)
(Trash Cabinet)
PRSCD-19-18
PRSCD-19-18
(Drainboard Cabinet)
(Drainboard Cabinet)
PRLR-18
(Liquor Display Rack)
PR-42X42SP-10R
(Pass-Thru Workstation)
GWHT-24
(Glass Washer)
PRSJT-24-DR
(Trash Cabinet)
PRF-2045ICM
PRF-2045ICM
BBR-35
(60º Corner Filler)
(Back Bar Refrigeration)
✔
Our factory takes the time to set up
your entire Bar Die System to ensure
all equipment properly fits and matches
your specifications. REF-DD
PRPOS-18-DR
(Point of Sales Cabinet)
Actual Job Shown Set Up for Quality Check
Quality & Customer Satisfaction
Is Our Top Priority!
(60º Corner Filler)
Shown with PRF-2045ICM Custom Filler & PRLR-18 Liquor Rack