Kamlok Catalog REV_WIP.indd

4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • www.armorproductsinc.com • [email protected] • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
TWIN-KAM®
Kamlok® Couplers
1. Easy Coupling Action.
Minimal effort at the ends of the cam arms is used to close the
adaptor and the coupler.
2. Highest Quality Gasket Materials
3. Stainless Steel Pins will not rust or bind.
4. Highest Quality Alloys
5. Hydrostatically Tested
6. Exclusive Twin-Kam® Arms
7. Interchangeability
with other couplers made to the same specifications. Armor Products Kamlok® Quick Couplings are manufactured to the dimensional specifications of MIL-C-27487 and AA59236.
8. Guaranteed-For-Life Arms
Our Strong Arm Guarantee: In the unlikely event a Twin-Kam®
Arm ever breaks we will replace the Arm for free ̶ no questions
asked.
Parts and Accessories
Armor Products Inc. offers parts and accessories for Aluminum, Brass, and Stainless Steel Kamloks®. The patented Twin-Kam® Arm replacement kits are available in Brass and Stainless Steel, supplied with Stainless Steel Pins that will not rust or bind. Armor Products Inc. also carries the highest
quality gaskets for all your special chemical needs.
Please call if you need a recommendation for the proper gasket material.
Note: For orders to military specification, certification
of compliance to MIL-C-27487 and AA59326
will be furnished, if requested with order.
Table of Contents
##
“Basic Eight” Kamlok® Couplers and Adaptors
##
Stainless Steel Autolok Couplers
##
Specialty and Tank Truck Couplers & Adaptors
##
Replacement Parts, Kits & Accessories
##
Ball Valves & No-Loss Couplers
##
Storage Tank Components
##
Fuel & Water Military Nozzles
##
Technical Data, Safety & Use Instructions
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
“Basic Eight”
Kamlok Couplers & Adaptors
®
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
633A- MALE ADAPTOR X FEMALE THREAD
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
SST ARMS
CS ARMS
CLIP-LOKS
STAINLESS STEEL
(SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
BSPT
BRASS
BSPT
IMPORT
SST
SST, BSPT
1/2”
AL05
AL05-C
AL05-T
AL05-OD
AL05-HC
AL05-BT
BR05
BR05-BT
CLIP-LOKS
YBR05
SS05
SS05-BT
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-BT
BR07
BR07-BT
YBR07
SS07
SS07-BT
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-BT
BR10
BR10-BT
YBR10
SS10
SS10-BT
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-BT
BR12
BR12-BT
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-BT
BR15
BR15-BT
YBR15
SS15
SS15-BT
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-BT
BR20
BR20-BT
YBR20
SS20
SS20-BT
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-BT
BR25
BR25-BT
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-BT
BR30
BR30-BT
YBR30
SS30
SS30-BT
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-BT
BR40
BR40-BT
YBR40
SS40
SS40-BT
5”
AL50
AL50-C
AL50-T
AL50-OD
AL50-HC
AL50-BT
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
AL60-BT
BR60
BR60-BT
YBR60
SIZE
SUFFIX
633B- FEMALE COUPLER X MALE THREAD
ALUMINUM (AL)
BRASS
CLIP-LOKS
STAINLESS STEEL
(SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
BSPT
BRASS
BSPT
IMPORT
SST
SST, BSPT
1/2”
AL05
AL05-C
AL05-T
AL05-OD
AL05-HC
AL05-SST
AL05-CS
AL05-BT
BR05
BR05-BT
CLIP-LOKS
YBR05
SS05
SS05-BT
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-SST
AL07-CS
AL07-BT
BR07
BR07-BT
YBR07
SS07
SS07-BT
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-SST
AL10-CS
AL10-BT
BR10
BR10-BT
YBR10
SS10
SS10-BT
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-SST
AL12-CS
AL12-CL
AL12-BT
BR12
BR12-BT
BR12-CL
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-SST
AL15-CS
AL15-CL
AL15-BT
BR15
BR15-BT
BR15-CL
YBR15
SS15
SS15-BT
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-SST
AL20-CS
AL20-CL
AL20-BT
BR20
BR20-BT
BR20-CL
YBR20
SS20
SS20-BT
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-SST
AL25-CS
AL25-CL
AL25-BT
BR25
BR25-BT
BR25-CL
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-SST
AL30-CS
AL30-CL
AL30-BT
BR30
BR30-BT
BR30-CL
YBR30
SS30
SS30-BT
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-SST
AL40-CS
AL40-CL
AL40-BT
BR40
BR40-BT
BR40-CL
YBR40
SS40
SS40-BT
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
AL60-BT
BR60
BR60-BT
5”
6”
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
YBR60
633C- FEMALE COUPLER X HOSE SHANK
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
BRASS
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
BSPT
BRASS
STAINLESS STEEL
(SST)
BSPT
CLIP-LOKS
1/2”
IMPORT
SST
YBR05
SS05
SS07
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-SST
AL07-CS
AL07-CL
BR07
YBR07
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-SST
AL10-CS
AL10-CL
BR10
YBR10
SS10
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-SST
AL12-CS
AL12-CL
BR12
BR12-CL
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-SST
AL15-CS
AL15-CL
BR15
BR15-CL
YBR15
SS15
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-SST
AL20-CS
AL20-CL
BR20
BR20-CL
YBR20
SS20
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-SST
AL25-CS
AL25-CL
BR25
BR25-CL
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-SST
AL30-CS
AL30-CL
BR30
BR30-CL
YBR30
SS30
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-SST
AL40-CS
AL40-CL
BR40
BR40-CL
YBR40
SS40
5”
AL50
AL50-C
AL50-T
AL50-OD
AL50-HC
AL50-SST
AL50-CS
AL50-CL
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
SIZE
SUFFIX
SST, BSPT
BR60
633D- FEMALE COUPLER X FEMALE THREAD
ALUMINUM (AL)
BRASS
CLIP-LOKS
STAINLESS STEEL
(SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
BSPT
BRASS
BSPT
IMPORT
SST
SST, BSPT
1/2”
AL05
AL05-C
AL05-T
AL05-OD
AL05-HC
AL05-SST
AL05-CS
AL05-BT
BR05
BR05-BT
YBR05
SS05
SS05-BT
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-SST
AL07-CS
AL07-BT
BR07
BR07-BT
YBR07
SS07
SS07-BT
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-SST
AL10-CS
AL10-BT
BR10
BR10-BT
YBR10
SS10
SS10-BT
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-SST
AL12-CS
AL12-CL
AL12-BT
BR12
BR12-BT
BR12-CL
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-SST
AL15-CS
AL15-CL
AL15-BT
BR15
BR15-BT
BR15-CL
YBR15
SS15
SS15-BT
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-SST
AL20-CS
AL20-CL
AL20-BT
BR20
BR20-BT
BR20-CL
YBR20
SS20
SS20-BT
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-SST
AL25-CS
AL25-CL
AL25-BT
BR25
BR25-BT
BR25-CL
YBR25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-SST
AL30-CS
AL30-CL
AL30-BT
BR30
BR30-BT
BR30-CL
YBR30
SS30
SS30-BT
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-SST
AL40-CS
AL40-CL
AL40-BT
BR40
BR40-BT
BR40-CL
YBR40
SS40
SS40-BT
5”
AL50
AL50-C
AL50-T
AL50-OD
AL50-HC
AL50-SST
AL50-CS
AL50-CL
AL50-BT
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
BR60
BR60-BT
AL60-BT
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
CLIP-LOKS
633E- MALE ADAPTOR X HOSE SHANK
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
BRASS
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
BSPT
BRASS
STAINLESS STEEL
(SST)
BSPT
CLIP-LOKS
1/2”
IMPORT
SST
SST, BSPT
YBR05
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
BR07
YBR07
SS07
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
BR10
YBR10
SS10
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
BR12
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
BR15
YBR15
SS15
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
BR20
YBR20
SS20
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
BR25
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
BR30
YBR30
SS30
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
BR40
YBR40
SS40
5”
AL50
AL50-C
AL50-T
AL50-OD
AL50-HC
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
SIZE
SUFFIX
BR60
633F- MALE ADAPTOR X MALE THREAD
ALUMINUM (AL)
BRASS
SST ARMS
CS ARMS
CLIP-LOKS
STAINLESS STEEL
(SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
BSPT
BRASS
BSPT
IMPORT
SST
SST, BSPT
1/2”
AL05
AL05-C
AL05-T
AL05-OD
AL05-HC
AL05-BT
BR05
BR05-BT
YBR05
SS05
SS05-BT
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-BT
BR07
BR07-BT
YBR07
SS07
SS07-BT
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-BT
BR10
BR10-BT
YBR10
SS10
SS10-BT
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-BT
BR12
BR12-BT
YBR12
SS12
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-BT
BR15
BR15-BT
YBR15
SS15
SS15-BT
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-BT
BR20
BR20-BT
YBR20
SS20
SS20-BT
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-BT
BR25
BR25-BT
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-BT
BR30
BR30-BT
YBR30
SS30
SS30-BT
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-BT
BR40
BR40-BT
YBR40
SS40
SS40-BT
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
AL60-BT
BR60
BR60-BT
5”
6”
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
CLIP-LOKS
634A- DUST PLUG*
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
1 1/2”
AL15
AL15-C
AL15-T
2”
AL20
AL20-C
2 1/2”
AL25
3”
4”
SST ARMS
CS ARMS
CLIP-LOKS
BSPT
BRASS
STAINLESS STEEL
(SST)
BSPT
CLIP-LOKS
IMPORT
SST
BR07
YBR07
SS07
BR10
YBR10
SS10
AL12-HC
BR12
YBR12
SS12
AL15-OD
AL15-HC
BR15
YBR15
SS15
AL20-T
AL20-OD
AL20-HC
BR20
YBR20
SS20
AL25-C
AL25-T
AL25-OD
AL25-HC
BR25
YBR25
SS25
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
BR30
YBR30
SS30
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
BR40
YBR40
SS40
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
BR60
SIZE
SUFFIX
SST, BSPT
1/2”
5”
6334B- DUST CAP*
ALUMINUM (AL)
BRASS
CLIP-LOKS
BSPT
BRASS
STAINLESS STEEL
(SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
BSPT
CLIP-LOKS
IMPORT
SST
3/4”
AL07
AL07-C
AL07-T
AL07-OD
AL07-HC
AL07-SST
AL07-CS
1”
AL10
AL10-C
AL10-T
AL10-OD
AL10-HC
AL10-SST
AL10-CS
BR07
YBR07
SS07
BR10
YBR10
1 1/4”
AL12
AL12-C
AL12-T
AL12-OD
AL12-HC
AL12-SST
AL12-CS
AL12-CL
BR12
BR12-CL
YBR12
SS10
1 1/2”
AL15
AL15-C
AL15-T
AL15-OD
AL15-HC
AL15-SST
AL15-CS
AL15-CL
BR15
BR15-CL
YBR15
SS15
2”
AL20
AL20-C
AL20-T
AL20-OD
AL20-HC
AL20-SST
AL20-CS
AL20-CL
BR20
BR20-CL
YBR20
SS20
2 1/2”
AL25
AL25-C
AL25-T
AL25-OD
AL25-HC
AL25-SST
AL25-CS
AL25-CL
BR25
BR25-CL
YBR25
SS25
3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-SST
AL30-CS
AL30-CL
BR30
BR30-CL
YBR30
SS30
4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-SST
AL40-CS
AL40-CL
BR40
BR40-CL
YBR40
SS40
5”
AL50
AL50-C
AL50-T
AL50-OD
AL50-HC
AL50-SST
AL50-CS
AL50-CL
6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
1/2”
BR60
*Note : Dust Plugs and Dust Caps are not designed for use in pressure applications
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
SST, BSPT
Stainless Steel Autolok Couplers
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
733DL- COUPLER X FEMALE NPT
733BL- COUPLER X MALE NPT
SIZE
PRODUCT NO.
1/2”
733DL-05SB
3/4”
733DL-07SB
1”
733DL-10SB
1 1/4”
733DL-12SB
1 1/2”
733DL-15SB
2”
733DL-20SB
2 1/2”
733DL-25SB
3”
733DL-30SB
4”
733DL-40SB
SIZE
PRODUCT NO.
1/2”
733DL-05SB
3/4”
733DL-07SB
1”
733DL-10SB
1 1/4”
733DL-12SB
1 1/2”
733DL-15SB
2”
733DL-20SB
2 1/2”
733CL- COUPLER X HOSE SHANK
3”
733DL-30SB
4”
733DL-40SB
SIZE
PRODUCT NO.
1/2”
3/4”
733DL-07SB
1”
733DL-10SB
1 1/4”
733DL-12SB
1 1/2”
733DL-15SB
2”
733DL-20SB
2 1/2”
733DCL- DUST CAP
3”
733DL-30SB
4”
733DL-40SB
SIZE
PRODUCT NO.
1/2”
733ARK- AUTOLOK CAM ARM KITS
3/4”
733DL-07SB
1”
733DL-10SB
1 1/4”
733DL-12SB
1 1/2”
733DL-15SB
2”
733DL-20SB
2 1/2”
733DL-25SB
3”
733DL-30SB
4”
733DL-40SB
SIZE
PRODUCT NO.
1/2”- 3/4”
733ARK-SS07
1”
733ARK-SS10
1 1/4”- 2 1/2”
733ARK-SS20
3” - 4”
733ARK-SS30
Product kit includes:
2 Cam Arms, 2 Pins, 2 Finger Rings, Instructions
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Specialty and Tank Truck
Couplers & Adaptors
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
633AA (DA)- SPOOL ADAPTOR
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
STAINLESS STEEL
(SST)
BRASS
SST
BR22
SS2020
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
2” X 2 1/2”
AL152
AL152-C
AL152-C
AL152-OD
AL152-HC
2” X 3”
AL23
AL23-C
AL23-T
AL23-OD
AL23-HC
2” X 2”
AL22
AL22-C
AL22-T
AL22-OD
AL22-HC
3” X 3”
AL33
AL33-C
AL33-T
AL33-OD
AL33-HC
SS3030
4” X 4”
AL44
AL44-C
AL44-T
AL44-OD
AL44-HC
SS4040
4” X 1 1/2”
AL154
AL154-C
AL154-T
AL154-OD
AL154-HC
SS2030
633BA (DA)- FEMALE COUPLER X MALE ADAPTOR
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
STAINLESS STEEL (SST)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
BRASS
CLIP-LOKS
2” X 2 1/2”
AL215
AL215-C
AL215-T
AL215-OD
AL215-HC
AL215-SST
AL215-CS
AL215-CL
BR215
BR215-CL
2” X 3”
AL23
AL23-C
AL23-T
AL23-OD
AL23-HC
AL23-SST
AL23-CS
AL23-CL
3” X 1 1/2“
AL315
AL315-C
AL315-T
AL315-OD
AL315-HC
AL315-SST
AL315-CS
AL315-CL
3” X 2”
AL32
AL32-C
AL32-T
AL32-OD
AL32-HC
AL32-SST
AL32-CS
AL32-CL
3” X 4”
AL34
AL34-C
AL34-T
AL34-OD
AL34-HC
AL34-SST
AL34-CS
AL34-CL
4” X 2”
AL42
AL42-C
AL42-T
AL42-OD
AL42-HC
AL42-SST
AL42-CS
AL42-CL
4” X 3”
AL43
AL43-C
AL43-T
AL43-OD
AL43-HC
AL43-SST
AL43-CS
AL43-CL
4” X 6”
AL46
AL46-C
AL46-T
AL46-OD
AL46-HC
AL46-SST
AL46-CS
AL46-CL
AL64
AL64-C
AL64-T
AL64-OD
AL64-HC
SST
DA-SS2030
DA-SS3020
3” X 3”
DA-SS3020V
DA-SS3030V
5” X 4”
6” X 4”
BALL VALVE
DA-SS4030
SS5
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
633FD- MALE ADAPTOR X MALE NPT
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
2” X 2 1/2”
AL215
AL215-C
AL215-T
AL215-OD
AL215-HC
3” X 2”
AL32
AL32-C
AL32-T
AL32-OD
AL32-HC
3” X 4”
AL34
AL34-C
AL34-T
AL34-OD
AL34-OD
4” X 3”
AL43
AL43-C
AL43-T
AL43-OD
AL43-OD
633BD- FEMALE COUPLER X MALE NPT
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
2” X 2 1/2”
AL215
AL215-C
AL215-T
AL215-OD
AL215-HC
AL215-SST
AL215-CS
AL215-CL
4” X 3”
AL43
AL43-C
AL43-T
AL43-OD
AL43-HC
AL43-SST
AL43-CS
AL43-CL
633DD- FEMALE COUPLER X FEMALE NPT
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
3” X 2”
AL32
AL32-C
AL32-T
AL32-OD
AL32-HC
AL32-SST
AL32-CS
AL32-CL
4” X 3”
AL43
AL43-C
AL43-T
AL43-OD
AL43-HC
AL43-SST
AL43-CS
AL43-CL
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
MISCELLANEOUS REDUCERS
NAME
PRODUCT NO.
4” ADAPTOR X 3” FEMALE NPT
633AD-AL43
4” COUPLER X 3” HOSE SHANK
633C-AL43
3” COUPLER X 2 1/2” HOSE SHANK
633CH-SS3025
3” ADAPTOR X 2 1/2” HOSE SHANK
633EH-SS3025
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
633G- 90º ELBOW CHECK VALVE
SIZE
PRODUCT NO.
2”
633G-AL20
3”
633G-AL30
VALVE ASSEMBLY REBUILD KITS
633H- 90º ELBOW
3”
633G-R2
4”
633G-R3
SIZE (AL)
633LBS- COUPLER X 150# FLANGE
633LBS- COUPLER X 150# FLANGE
PRODUCT NO.
1 1/2”
633H-AL15
2”
633H-AL20
3”
633H-AL30
TYPE
SIZE
PRODUCT NO.
BRASS
4”
633LBS-BR40
ALUMINUM
4”
633LBS-AL40
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2”
634BK-AL20
ALUMINUM
3”
634BK-AL30
ALUMINUM
4”
634BK-AL40
ALUMINUM
6”
634BK-AL60
STAINLESS STEEL
2”
634BK-AL20
STAINLESS STEEL
3”
634BK-AL30
STAINLESS STEEL
4”
634BK-AL40
LOCKABLE CAP REPLACEMENT ARM KITS
BRONZE ARMS
2”
KLA-2
BRONZE ARMS
3”
KLA-3
BRONZE ARMS
4”
KLA-4
BRONZE ARMS
6”
KLA-6
STAINLESS ARMS
2”
634BKARK-SS20
STAINLESS ARMS
3”
634BKARK-SS30
STAINLESS ARMS
4”
634BKARK-SS40
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
633LAS- ADAPTOR X 150# FLANGE
TYPE
SIZE
PRODUCT NO.
ALUMINUM
3”
633LAS-AL30
ALUMINUM, NON-DYED
3”
633LAS-AL30-C
ALUMINUM, SAND / TAN
3”
663LAS-AL30-T
ALUMINUM, OLIVE DRAB
3”
663LAS-AL30-OD
ALUMINUM
4”
633LAS-AL40
ALUMINUM, NON-DRYED
4”
633LAS-AL40-C
ALUMINUM, SAND / TAN
4”
633LAS-AL40-T
ALUMINUM, OLIVE DRAB
4”
633LAS-AL40-OD
STAINLESS STEEL
1”
633LAS-SS10
STAINLESS STEEL
1 1/2”
633LAS-SS15
STAINLESS STEEL
2”
633LAS-SS20
STAINLESS STEEL
2 1/2”
633LAS-SS25
STAINLESS STEEL
3”
633LAS-SS30
STAINLESS STEEL
4”
633LAS-SS40
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
633LAT- MALE ADAPTOR (HOSE SHANK X TTMA FLANGE)
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
A 1/2” X 3”
K123
K123-C
K123-T
K123-OD
K123-HC
2” X 3”
AL23
AL23-C
AL23-T
AL23-OD
AL123-HC
3” X 3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
2” X 4”
AL24
AL24-C
AL24-T
AL24-OD
AL24-HC
3” X 4”
AL34
AL34-C
AL34-T
AL34-OD
AL34-HC
4” X 4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
6” X 6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
2” X 4”
290HS
290HS-C
290HS-T
290HS-OD
290HS-HC
BRASS
BR40
633LBT- FEMALE COUPLER X TTMA FLANGE
SIZE
SUFFIX
ALUMINUM (AL)
BRASS
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
SST ARMS
CS ARMS
CLIP-LOKS
2” X 4”
AL24
AL24-C
AL24-T
AL24-OD
AL24-HC
AL24-SST
AL24-CS
AL24-CL
3” X 3”
AL30
AL30-C
AL30-T
AL30-OD
AL30-HC
AL30-SST
AL30-CS
AL30-CL
3” X 4”
AL34
AL34-C
AL34-T
AL34-OD
AL34-HC
AL34-SST
AL34-CS
AL34-CL
4” X 4”
AL40
AL40-C
AL40-T
AL40-OD
AL40-HC
AL40-SST
AL40-CS
AL40-CL
6” X 6”
AL60
AL60-C
AL60-T
AL60-OD
AL60-HC
BRASS
CLIP-LOKS
BR40
BR40-CL
6” HEAVY DUTY COUPLER AND ADAPTORS
STYLE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
633C
AL60HD
AL60HD-C
AL60HD-T
AL60HD-OD
AL60HD-HC
633E
AL60HD
AL60HD-C
AL60HD-T
AL60HD-OD
AL60HD-HC
633LBT
AL60HD
AL60HD-C
AL60HD-T
AL60HD-OD
AL60HD-HC
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
320F- FLANGED TEE
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
3”
K124
K124-C
K124-T
K124-OD
K124-HC
4”
K184
K184-C
K184-T
K184-OD
K184-HC
8FY (318F) - FLANGED WYE
SIZE
SUFFIX
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
4”
4
4-C
4-T
4-OD
4-HC
6”
6
6-C
6-T
6-OD
6-HC
SIZE
SUFFIX
GVPCM-GATE VALVES
ALUMINUM (AL)
AL
NON-DYED
SAND/TAN
OLIVE DRAB
HARDCOAT
4”
4
4-C
4-T
4-OD
4-HC
6”
6
6-C
6-T
6-OD
6-HC
MANIFOLD ASSEMBLIES
Manifold assemblies are available I/A/W many National
Stock Numbers (NSN). We are equipped to assemble and
hydrostaticaly test in multiple configurations. All we need
is an NSN, DWG number or a sketch of your requirements
to provide competitive pricing.
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
635S- MALE ADAPTOR WYE
TYPE
635C-MALE ADAPTOR X NPT CROSS
633K- 90º COUPLER X MALE ADAPTOR
633KB- 90º COUPLER X COUPLER
SIZE
PRODUCT NO.
ALUMINUM
2”
635S-AL20
ALUMINUM, NON-DYED
2”
635S-AL20-C
ALUMINUM, SAND / TAN
2”
635S-AL20-T
ALUMINUM, OLIVE DRAB
2”
635S-AL20-OD
ALUMINUM, HARDCOAT
2”
635S-AL20-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2”
635C-AL20
ALUMINUM, NON-DYED
2”
635C-AL20-C
ALUMINUM, SAND / TAN
2”
635C-AL20-T
ALUMINUM, OLIVE DRAB
2”
635C-AL20-OD
ALUMINUM, HARDCOAT
2”
635C-AL20-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
4”
633K-AL40
ALUMINUM, NON-DYED
4”
633K-AL40-C
ALUMINUM, SAND / TAN
4”
633K-AL40-T
ALUMINUM, OLIVE DRAB
4”
633K-AL40-OD
ALUMINUM, HARDCOAT
4”
633K-AL40-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
4”
633KB-AL40
ALUMINUM, NON-DYED
4”
633KB-AL40-C
ALUMINUM, SAND / TAN
4”
633KB-AL40-T
ALUMINUM, OLIVE DRAB
4”
633KB-AL40-OD
ALUMINUM, HARDCOAT
4”
633KB-AL40-HC
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
319K- WYE COUPLER X ADAPTORS
633HL- 90º COUPLER X MALE THREAD
319L- WYE COUPLER (2) X ADAPTOR
319BB- WYE COUPLER (2) X ADAPTOR
TYPE
SIZE
PRODUCT NO.
ALUMINUM
1 1/2”
319K-AL15
ALUMINUM, NON-DYED
1 1/2”
319K-AL15-C
ALUMINUM, SAND / TAN
1 1/2”
319K-AL15-T
ALUMINUM, OLIVE DRAB
1 1/2”
319K-AL15-OD
ALUMINUM, HARDCOAT
1 1/2”
319K-AL15-HC
ALUMINUM
2”
319K-AL20
ALUMINUM, NON-DYED
2”
319K-AL20-C
ALUMINUM, SAND / TAN
2”
319K-AL20-T
ALUMINUM, OLIVE DRAB
2”
319K-AL20-OD
ALUMINUM, HARDCOAT
2”
319K-AL20-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
1 1/2”
633HL-AL15
ALUMINUM, NON-DYED
1 1/2”
633HL-AL15-C
ALUMINUM, SAND / TAN
1 1/2”
633HL-AL15-T
ALUMINUM, OLIVE DRAB
1 1/2”
633HL-AL15-OD
ALUMINUM, HARDCOAT
1 1/2”
633HL-AL15-HC
ALUMINUM
2”
633HL-AL20
ALUMINUM, NON-DYED
2”
633HL-AL20-C
ALUMINUM, SAND / TAN
2”
633HL-AL20-T
ALUMINUM, OLIVE DRAB
2”
633HL-AL20-OD
ALUMINUM, HARD COAT
2”
633HL-AL20-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
1 1/2”
319L-AL15
ALUMINUM, NON-DYED
1 1/2”
319L-AL15-C
ALUMINUM, SAND / TAN
1 1/2”
319L-AL15-T
ALUMINUM, OLIVE DRAB
1 1/2”
319L-AL15-OD
ALUMINUM, HARDCOAT
1 1/2”
319L-AL15-HC
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2”
319BB-AL20
ALUMINUM, NON-DYED
2”
319BB-AL20-C
ALUMINUM, SAND / TAN
2”
319BB-AL20-T
ALUMINUM, OLIVE DRAB
2”
319BB-AL20-OD
ALUMINUM, HARD COAT
2”
319BB-AL20-HC
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
320F - TEE FEMALE THREADED
633DD - COUPLER X COUPLER
633AW - ADAPTOR X SOCKET WELD
633DW (DF) - COUPLER X SOCKET WELD
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2”
320K-AL20
ALUMINUM, NON-DYED
2”
320F-AL20-C
ALUMINUM, SAND / TAN
2”
320F-AL20-T
ALUMINUM, OLIVE DRAB
2”
320F-AL20-OD
TYPE
SIZE
PRODUCT NO.
STAINLESS STEEL
2”
633DD-SD2020
STAINLESS STEEL
3”
633DD-SD3030
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2” X 2.015”
633AW-AL20-2015
ALUMINUM
3” X 3.530”
633AW-AL30-3530
ALUMINUM
4” X 4.415”
633AW-AL4415
ALUMINUM
4” X 4.530”
633AW-AL4530
ALUMIUM
6” X 6.655”
633AW-AL6655
STAINLESS STEEL
2” X 2.015”
633AW-SS2015
STAINLESS STEEL
3” X 3.530”
633AW-SS3530
STAINLESS STEEL
4” X 4.415”
633AW-SS4415
STAINLESS STEEL
4” X 4.530”
633AW-SS4530
TYPE
SIZE
PRODUCT NO.
ALUMINUM
2” X 2.015”
633DW-AL20-2015
ALUMINUM
3” X 3.530”
633DW-AL30-3530
ALUMINUM
4” X 4.415”
633DW-AL4415
ALUMINUM
4” x 4.530”
633DW-AL4530
ALUMIUM
6” x 6.655”
633DW-AL6655
STAINLESS STEEL
3/4”
633DF-SS07
STAINLESS STEEL
1”
633DF-SS10
STAINLESS STEEL
1 1/2”
633DF-SS15
STAINLESS STEEL
2”
633DF-SS20
STAINLESS STEEL
3”
633DF-SS30
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Replacement Parts,
Kits and Accessories
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
REPLACEMENT ARM PINS
PIN DIMENSIONS
SECURITY CHAIN
MATERIAL
5/32” X 3/4”
304SST
H20138M
7/32” X 1”
304SST
H20139M
1/4” X 1 1/4”
304SST
H20140M
1/4” X 1 1/2”
304SST
H20141M
5/16” X 1 1/4”
304SST
H20142M
5/16” X 1 5/8”
304SST
H20143M
5/16” X 2”
304SST
H20144M
7/16” X 2”
304SST
H20145M
1/4” X 1 1/8”
304SST
H20620M
5/16” X 1 1/2”
304SST
H20621M
DESCRIPTION
FINGER RINGS
LENGTH
PRODUCT NO.
SST CHAIN WITH “S” HOOKS
12”
HX30361
BRASS CHAIN WITH “S” HOOKS
6”
H06682M
BRASS CHAIN WITH “S” HOOKS
12”
H06683M
ZINC PLATED WITH RINGS
12”
H01436
YELLOW ZINC PLATED WITH RINGS
12”
H01436LG
DESCRIPTION
REPLACEMENT CAM ARM KITS
PRODUCT NO.
COUPLER SIZE
PRODUCT NO.
CHROME PLATED RING
3/4”
YELLOW ZINC PLATED RING
1” - 2 1/2”
H06451M
YELLOW ZINC PLATED RING
3” - 6”
H07592M
SST SPRING RING
1” - 6”
H20550M
COUPLER MATERIAL
H01434M
SIZE
PRODUCT NO.
ALUMINUM, BRASS
1/2” - 3/4” **
H09382
ALUMINUM, BRASS
1”
H09833
ALUMINUM, BRASS
1 1/4” - 2 1/2”
H01829
ALUMINUM, BRASS
3” - 5”
H00487
ALUMINUM, BRASS
3” - 5”
H00487J*
ALUMINUM, BRASS
6”
H02124
STAINLESS STEEL
1/2” - 3/4” **
H02164
STAINLESS STEEL
1”
H01835
STAINLESS STEEL
1 1/4” - 2 1/2”
H01836
STAINLESS STEEL
3” - 4”
H02167
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
REPLACEMENT CAM ARMS
ARM MATERIAL
SIZE
POWDERED BRASS
1/2” - 3/4”
C10169M
POWDERED BRASS
1”
C10170M
POWDERED BRASS
1 1/4” - 2 1/2”
C10171M
POWDERED BRASS
3” - 5”
D10184M
CAST BRONZE
6”
D00812B
POWDERED 304 SST
1/2” - 3/4”
C10173M
POWDERED 304 SST
1”
C10174M
POWDERED 304 SST
1 1/4”- 2 1/2”
C10175M
POWDERED 304 SST
3” - 4”
D10185M
POWDERED 316 SST
1/2” - 3/4”
C10187M
POWDERED 316 SST
1”
C10188M
POWDERED 316 SST
1 1/4” - 2 1/2”
C10189M
POWDERED 316 SST
3” - 4”
D10190M
POWDERED CS
1 1/4” - 2 1/2”
C03378M
POWDERED CS
3” - 5”
C03379M
CLIPLOK KITS
FITS SIZE
PADDLE ARM KITS
6” BOLT TOGETHER CLAMP
PRODUCT NO.
1 1/4” - 2 1/2”
634CLK-1020
3” - 5”
634CLK-1070
FITS SIZE
KAM STRAPS
PRODUCT NO.
PRODUCT NO.
COUPLER 3” - 4”
H02386
DUST CAP 3” - 4”
H02387
FITS SIZE
DIMENSIONS
PRODUCT NO.
1” - 2”
1” X 15”
KS-15
2 1/2” - 4”
2” X 20”
KS-20
5” - 6”
2” X 22”
KS-22
2” X 60”
KS-60
FITS SIZE
FINISH
6”
PLAIN
6”
ANODIZED
6C-V77AL-A
6”
HARDCOATED
6C-V77AL-HC
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
PRODUCT NO.
6C-V77AL
FLANGE GASKETS, TTMA & ANSI
GASKET / BUNA-N (STANDARD)
GASKET / WHITE BUNA-N
SIZE
MATERIAL
STYLE
3”
CORK / NITRILE
TTMA
4”
CORK / NITRILE
TTMA
4FG
4”
BUNA-N
TTMA
4FGB
4”
WHITE BUNA
TTMA
4FGB-W
6”
CORK / NITRILE
TTMA
6FG
6”
BUNA-N
TTMA
6FGB
3”
CORK / NITRILE
ANSI
3ANSI-FG
4”
CORK / NITRILE
ANSI
4ANSI-FG
SIZE
PRODUCT NO.
PRODUCT NO.
3FG
MIL SPEC
PRODUCT NO.
3/4”
MS27030-2
H06595M
1”
MS27030-3
H06480M
1 1/4”
MS27030-4
H06477M
1 1/2”
MS27030-5
H06430M
2”
MS27030-6
H20544M
2 1/2”
MS27030-7
H20545M
3”
MS27030-8
H20546M
4”
MS27030-9
H20547M
5”
-
H20548M
6”
MS27030-10
H20549M
GASKET / NEOPRENE
SIZE
PRODUCT NO.
3/4”
-
3/4”
H01881M
1”
-
1”
H01884M
1 1/4”
-
1 1/4”
H01887M
H20540M
1 1/2”
H01890M
2”
H20541M
2”
H01893M
2 1/2”
-
2 1/2”
H01896M
3”
H20542M
3”
H01899M
4”
H20543M
4”
H01902M
-
5”
-
-
6”
H01251M
SIZE
PRODUCT NO.
1 1/2”
5”
6”
GASKET / E.P.D.M
SIZE
SIZE
3/4”
PRODUCT NO.
H05215M
1”
H05216M
1 1/4”
H20534M
1 1/2”
H20535M
2”
H20536M
2 1/2”
H20537M
3”
H20538M
4”
H05225M
5”
6”
GASKET / WHITE NEOPRENE
H04137M
H20539M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
3/4”
-
1”
H04196M
1 1/4”
-
1 1/2”
H04200M
2”
H04201M
2 1/2”
H01189M
3”
H01190M
4”
H04208M
5”
-
6”
H04209M
GASKET / VITON - A
GASKET / PTFE WAFER
GASKET / SILICON
SIZE
PRODUCT NO.
GASKET / PTFE ENVELOPE,
VITON - A
SIZE
PRODUCT NO.
3/4”
H00966M
3/4”
H-3401
1”
H00967M
1”
H03402
1 1/4”
H00968M
1 1/4”
H03405
1 1/2”
H00972M
1 1/2”
H03407
2”
H00973M
2”
H03408
2 1/2”
H00974M
2 1/2”
H03410
3”
H00975M
3”
H03411
4”
H00976M
4”
H03412
5”
-
5”
-
6”
H00977M
6”
-
SIZE
PRODUCT NO.
GASKET / VITON - A
ENCAPSULATED
SIZE
3/4”
H01979M
3/4”
1”
H01980M
1”
1 1/4”
H01981M
1 1/4”
1 1/2”
H01982M
1 1/2”
2”
H01983M
2”
2 1/2”
H02172M
2 1/2”
3”
H02173M
3”
4”
H02174M
4”
5”
-
5”
6”
H02175M
6”
SIZE
PRODUCT NO.
GASKET / PTFE ENVELOPE,
BUNA - N
SIZE
PRODUCT NO.
PRODUCT NO.
3/4”
H01882M
3/4”
H03304
1”
H01885M
1”
H03307
1 1/4”
H01888M
1 1/4”
H03310
1 1/2”
H01891M
1 1/2”
H03317
2”
H01894M
2”
H03325
2 1/2”
H01897M
2 1/2”
H03330
3”
H01900M
3”
H03333
4”
-
4”
H03336
5”
-
5”
-
6”
-
6”
-
GASKET / SILICON ENCAPSULATED
SIZE
PRODUCT NO.
3/4”
H20888M
1”
H20890M
1 1/4”
H20892M
1 1/2”
H20894M
2”
H07904M
2 1/2”
-
3”
H20896M
4”
-
5”
-
6”
-
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
FLAME ARRESTOR
SIZE
2” X 6”
3 / 32” - 7 X 7, SST CABLE
LENGTH
PER FOOT
2” CAM ARM, SHORT
FITS SIZE
1 1/4” - 2 1/2”
“LK” SERIES LOCKING ARM KITS
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
FITS SIZE
PRODUCT NO.
FA-2
PRODUCT NO.
CABLE
PRODUCT NO.
C01353B
PRODUCT NO.
1”
634LK-1020
1 1/4”
634LK-1030
1 1/2”
634LK-1040
2”
634LK-1050
2 1/2”
634LK-1060
3”
634LK-1070
4”
634LK-1080
Ball Valves & No-Loss Couplers
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
“NO LOSS” - 90 DEGREE VALVE - 677 SERIES KAMLOK® COUPLER AND ADAPTORS
SIZE
PRODUCT NO.
677 - A
2” X 2”
677A-AL22
4” X 4”
677A-AL44
677 - B
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
2” X 1 1/2”
677B-AL215
2” X 2”
677B-AL22
4” X 4”
677B-AL44
610 - 316 SST BALL VALVES
SIZE
608 - BRASS BALL VALVES
1/4”
610-01
3/8”
610-03
1/2”
610-05
3/4”
610-07
1”
610-10
1 1/4”
610-12
1 1/2”
610-15
2”
610-20
2 1/2”
610-25
3”
610-30
SIZE
1/2” WYE STRAINER VALVE
PRODUCT NO.
PRODUCT NO.
1/4”
608-01
3/8”
608-03
1/2”
608-05
3/4”
608-07
1”
608-10
1 1/4”
608-12
1 1/2”
608-15
2”
608-20
2 1/2”
608-25
3”
608-30
4”
608-40
DESCRIPTION
- 1/2” Brass Ball Valve / WYE Strainer
Combo Male NPT X Hose Barb
- #30 Mesh Stainless Steel Strainer
Screen
BALL VALVE ASSEMBLIES
DESCRIPTION
Ball valve assemblies are available
I/A/W many National Stock Numbers
(NSN). We are equipped to assemble
and hydrostaticly test in multiple
configurations. All we need is NSN,
DWG number or a sketch of your
requirements to provide competitive
pricing.
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Storage Tank Components
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
PGV10 HYDRAULIC LIFT VALVE
SIZE
PRODUCT NO.
3/4” FNPT
PGV10-07
1” FNPT
PGV10-10
1 1/4” FNPT
PGV10-12
1 1/2” FNPT
PGV10-15
2” FNPT
PGV10-20
3” FNPT
PGV10-30
DESCRIPTION
The PGV10 Hydraulic Lift Valve is
designed for use in hydraulic lifts.
The lever is spring-loaded to make
the valve self-closing. Working
pressure is rated up to 125 psi for oil
or water (200 psi for 2” and 3”).
ESV EMERGENCY SHUT-OFF VALVE
SIZE
PRODUCT NO.
2” MNPT INLET X 2” FNPT OUTLET
ESV-2
DESCRIPTION
The ESV Emergency Shut-Off Valve is designed to shut
down product flow from the tank in the event of a fire. The
ESV is installed with the valve end inside the above ground
storage tank. Should a fire arise, a fusible link melts at 160
F and the spring activated valve closes, shutting down the
flow of product to the supply lines.
TPV-95 TANK PRESSURE VENT
SIZE
PRESSURE
PRODUCT NO.
2”
2 oz.
TPV-9522
3”
2 oz.
TPV-9532
2”
4 oz.
TPV-9524
3”
6 oz.
TPV-9536
4”
6 oz.
TPV-9546
DESCRIPTION
TPV-95 Tank Pressure Vents are installed on above
ground storage tanks. The valve is designed to open
at a preset pressure to allow the tank to vent. This vent
also allows manual checking of the tank’s fluid level
with a quick-opening, self-closing access port.
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
TAF-02 TANK ADAPTOR FLANGE
SIZE
PRODUCT NO.
6”
TAF-02-6
8”
TAF-02-8
DESCRIPTION
TAF-02 Tank Adaptor Flanges can be installed
on older style storage tanks that do not have
flanges incorporated into the tank design.
The TAF-02 is available with either a 6” or
8” female NPT thread to screw over the tank
riser connection. Both the 6” and 8” have a 9
1/2” bolt circle with 3/8” - 16 threaded holes.
Adaptor flanges are aluminum and come with
1 1/2” long hex screws.
PCM 691 EMERGENCY VALVE
SIZE
PRODUCT NO.
1” M X 3/4” F
691-ZA07
1” M X 1” F
691-ZA10
DESCRIPTION
PCM 691’s were designed for use with above ground farm
servicing tanks. The valve screws into the tank and the hose
then attaches to the other end. With the hold-open link properly
engaged, the valve will close if the temperature reaches 160 F.
PCM UTV-3
BODY
LEVER
SEAL
ZA12
DIE-CAST
CORK
SIZE
PRODUCT NO.
3” NPT
PCM UTV-3
DESCRIPTION
The PCM Utility Tank Vent was desinged to be installed on the
top of above ground fuel storage tanks. The UTV has an internal
metal screen which prevents debris and insects from entering
the tank and prevents water entry into the tank vent lines. Vapors
are vented downward. PCM UTV’s can be used for a variety of
tank venting applications.
BODY
CAP
SCREEN
ZA12
ALUMINUM
BRASS
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Fuel & Water Military Nozzles
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
FN - FARM / UTILITY NOZZLE
FEATURES
PRODUCT NO.
3/4” INLET, LEADED (15/16’) SPOUT
FN-07L
3/4” INLET, LEADED (13/16’) SPOUT
FN-07U
1” INLET, LEADED (15/16’) SPOUT
FN-10L
1” INLET, LEADED (15/16’) SPOUT
FN-10U
DESCRIPTION
Cast Aluminum Body, Buna-N Disc & Seals, Brass Stem. ;
for Low Pressure or Gravity Feed Small Utility Tanks ;
Made in the USA
PCM21 - 1 1/2” MANUAL FUELING NOZZLE
NSN / DWG
PRODUCT NO.
4930-00-902-4642 / 31216E8242
PCM21-M4642
4930-01-360-5540 / NA
PCM21-M5540
2910-01-188-8198 / 13225E9096
PCM21-M8198
DESCRIPTION
1 1/2” Manual Bulk Fuel or Water Nozzle ; Type 1 Size 2
per A-A-52030 ; In accordance with NSN or DWG ;
Manufactured in the USA
PCM81 - 1” MANUAL WATER NOZZLE
NSN / DWG
PRODUCT NO.
4610-01-440-6834 / 13229E7168
PCM81-M6834
4610-01-188-8197 / 13225E9094-2
PCM81-M8197
2910-01-188-8196 / 13225E9094-3
PCM81-M8196
4610-01-212-9543 / 13226E1707
PCM81-M9543
4730-01-212-9543 / 13226E1707
PCM81-M9543
DESCRIPTION
1” Manual Nozzle designed for potable water usage;
Easy opening & shockless closing ; In accordance with listed
NSN or DWG ; Manufactured in the USA
PCM61 - PISTOL GRIP HIGH FLOW NOZZLE
NSN / DWG
PRODUCT NO.
4930-01-022-7901 / NA
PCM61-M7901
4930-00-816-5943 / 10867297
PCM61-M5493
4930-00-861-992 / 10884808
PCM61-M9982
DESCRIPTION
Available in 1 1/2” or 2” inlet ; Overwing Type High Flow
Nozzle Dual Poppet Value and Dashpot provide easy opening
& chockless closing ; In accordance to NSN or DWG ;
Manufactured in the USA
PCM31 - 1” MANUAL FUELING NOZZLE
NSN / DWG
4930-01-318-6091 / NA
PRODUCT NO.
PCM31-M6091
DESCRIPTION
1” Manual Fueling Nozzle with Arctic Guard ;
Will reverse flow ; In accordance with listed NSN ;
Made in the USA
PCM90 - 1 1/2” AUTOMATIC FUELING NOZZLE
NSN / DWG
PRODUCT NO.
4930-01-290-0756 / NA
PCV90-MO756
4930-01-352-1660 / 13229E9837
PCV90-M1660
4930-01-352-1661 / 131229E9836
PCV90-M1661
DESCRIPTION
1 1/2” Automatic Shutoff Bulk Fueling Nozzle ; Available with
or without hold open latches ; In accordance to NSN or DWG ;
Manufactured in the USA
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Technical Data,
Safety & Use Instructions
4600 N. Mason Montgomery Road • Mason, OH 45040
888-417-49697 • Fax: 513-923-5907
Kamlok® is a registered trademark of Delaware Capital Formation
PIVOT PIN CHART
Use this chart for proper selection of pivot pins.
All pins use 304 SST, Aluminum and Brass
for Material of Construction.
633B- COUPLER
MALE N.P.T
SIZE
ALUMINUM
BRASS
1/2”
H20138M
H20138M
3/4”
H20138M
H20138M
1”
H20139M
H20139M
1 1/4”
H20620M
H20620M
1 1/2”
H20140M
H20140M
2”
H20141M
H20141M
2 1/2”
H20141M
H20141M
3”
H20143M
H20143M
4”
H20144M
H20144M
5”
633C- COUPLER
HOSE SHANK
633D- COUPLER
FEMALE N.P.T
634B- DUST CAP
6”
H20145M
SIZE
ALUMINUM
BRASS
3/4”
H20138M
H20138M
1”
H20139M
H20139M
1 1/4”
H20140M
H20140M
1 1/2”
H20140M
H20140M
2”
H20140M
H20141M
1/2”
2 1/2”
H20141M
H20141M
3”
H20143M
H20143M
4”
H20143M
H20144M
5”
H20143M
6”
H20145M
H20145M
SIZE
ALUMINUM
BRASS
1/2”
H20138M
3/4”
H20138M
H20138M
1”
H20139M
H20139M
1 1/4”
H20140M
H20140M
1 1/2”
H20140M
H20140M
2”
H20141M
H20141M
2 1/2”
H20141M
H20141M
3”
H20143M
H20143M
4”
H20143M
H20143M
5”
H20143M
6”
H20145M
SIZE
ALUMINUM
BRASS
3/4”
H20138M
H20138M
1”
H20139M
H20139M
1 1/4”
H20620M
H20620M
1/2”
1 1/2”
H20140M
H20140M
2”
H20140M
H20140M
2 1/2”
H20620M
H20141M
3”
H20142M
H20142M
4”
H20142M
H20142M
5”
6”
H20145M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Poly Gasket
Acetic Acid
X
X
N
Acetic Anhydride
X
X
P
X
X
X
N
Agricultural Lime Solutions
X
X
X
M
Alcohol-Amyl
X
X
X
M
X
X
X
M
Acetone
X
Alcohol-Butyl
X
Alcohol-Ethyl
X
X
M
X
X
M
X
X
M
Aluminum-Chloride
X
M
Aluminum-Fluoride 20º...
X
M
Alcohol-Isopropyl
X
X
Alcohol-Methyl
Aluminum-Nitrate
X
X
M
Aluminum Potassium Sufate
X
X
M
Aluminum Sulfate
X
X
M
Ammonia Solutions
X
Ammonium Chloride-Dry
Ammonium Hydroxide
X
X
P
X
M
X
N
Ammonium Nitrate
X
X
M
Ammonium Phosphate
X
X
M
Mono-Basic
X
X
M
Di-Basic or Tri-Basic
X
X
M
Ammonium Sulfate
X
X
M
X
X
N
X
X
M
Aniline
X
Arenic Acid
Asphalt
X
X
V
Barium Chloride
X
X
M
Barium Hydroxide
X
X
M
Barium Sultide
X
X
M
X
M
Basic Slag
Beer
X
Benzene/Benzol
Benzine
X
X
X
P
X
X
V
X
X
M
Black Liquor (Paper Ind.)
X
V
Bleach (12.5% Chlorine)
X
V
Borax
X
X
S
Bonic Acid
X
X
M
Brine
X
X
M
X
V
X
M
Bromic Acid
Burnt Lime (Ca O)
Butadiene
X
X
X
X
S
Butenes
X
X
X
V
Butyl Acetate-Dry
X
X
X
N
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Cadmium Cyanide
Calcium Acetate
X
Calcium Bisulfite
X
M
X
X
N
X
X
M
X
M
X
X
M
X
W
Calcium Chloride
Calcium Hydroxide Solutions
X
X
Poly Gasket
Calcium Hypochlorite
Calcium Nitrate 40º...
X
Carbolic Acid (Phenol)
X
V
X
V
Carbon Disultide
X
X
Carbon Tetrachloride
X
M
X
V
Carbonaded Beverages
X
X
P
Carbonic Acid
X
X
Castor oil
X
X
Caustic Potash (KOH)
Caustic Soda (Na OH)
“Cellosolves”
M
X
N
X
N
X
X
X
Clorobromomethane
“Chlorex”
N
X
N
X
V
X
P
Chromic Acid 50º...
X
X
W
Citric Acid
X
X
P
Cobaltized Super Comound
X
M
Copper Chloride-Dry
X
M
Copper Sulfate
X
X
M
X
M
X
X
M
X
X
M
Copperized Super Compound
Corn Oil
X
Cottonseed Oil
X
Creosote
X
X
X
V
Cresylic Acid
X
X
X
V
Cyclohexane
X
X
X
V
DDT
X
X
T
Detergents
X
Developer Solutions
Dextrose
X
X
M
X
M
X
M
Diesel Fuels
X
X
X
X
M
Diethylene Glycol
X
X
X
X
M
X
M
Disodium Phosphate
Dowtherm Oil
Ethanolamine
O
X
X
Ethyl Acetate
X
Ethylene Dichloride
Ethylene Glycol
Fatty Acids
X
P
X
N
X
X
X
X
X
V
M
X
X
M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Poly Gasket
Ferric Chloride
X
M
Ferric Hydroxide
X
M
Ferric Nitrate
X
X
M
Ferric Sulfate
X
X
M
Fluboric Acid
X
X
O
Formaldehyde, 40%
X
X
X
P
Formalin
X
X
X
P
Formic Acid
X
X
P
Freon
X
X
P
Fruid Juices: Grapefruit
X
X
P
Lemon
X
P
Pineapple
X
P
X
N
Furfural
X
X
Gasoline-Refined
X
X
X
M
Gasoline-Sour
X
X
M
Gelatin
X
X
X
P
Glucose
X
Glue
Glycerin
X
X
X
P
X
X
X
M
X
X
X
M
Glycols
X
M
Green Liquor (Paper Ind)
X
V
X
V
X
V
Hexane
X
X
Hydrobromic Acid (20%)
Hydrobromic Acid (50%)
X
Hydrochloric Acid
Hydrocyanic Acid 50%
X
X
Hydrofluoric Acid 50%
V
X
V
X
N
X
Hydrogen Peroxide
W
X
“Hypo”
X
Hypochlorous Acid 20%
M
X
Isobutyl Acetate
X
Isopropyl Acetate
X
X
V
V
X
X
N
X
X
N
Jet Fuel
X
X
V
Kerosene
X
X
X
M
Lacquers
X
X
X
T
Lactic Acids 20%
X
X
P
Lactic Acids 70%
X
X
P
X
X
P
Lard
X
Lead: Chloride, Sulphate
X
M
Lime Surry
X
X
M
Lime Sulphur
X
X
M
X
X
S
Linoleic Acid
X
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Poly Gasket
Linseed Oil
X
X
X
M
Magnesium Carbonate
X
X
X
M
Magnesium Hydroxide
X
X
X
N
X
X
M
X
X
M
Magnesium Nitrate
Magnesium Sulfate
X
Meat & Bone Meal
X
Mercuric Chloride
Mercury
Methanol
X
X
X
Methyl Amyl Acetate
Methylene Chloride
X
M
X
M
X
M
X
M
X
N
X
V
Methyl Benzene
X
X
X
V
Methyl Ethyl Ketone
X
X
X
X
X
X
Milk
X
N
X
X
M
X
X
P
X
Mineral Oil
Molasses
P
Muriate of Potash (KCl)
X
M
Muriatic Acid
X
V
Naptha
X
X
X
V
Naphthalene
X
X
X
V
X
X
M
Napthenic Acid
Nickel Chloride
X
X
M
Nickel Sulfate
X
X
M
Nitric Acid 15%-50%
X
X
V
Nitrobenzene
X
X
Nitro Lime
Octane
N
X
X
Oil-Core
M
X
X
V
X
X
M
Oil-Fuel
X
X
X
M
Oil-Hydraulic
X
X
X
X
M
Oil-Petroleum
Crude
Refined
X
X
Oil-Transmission
M
X
X
X
X
X
V
M
Oil-Vegetable
X
X
X
P
Oleic Acid
X
X
X
M
Oleum
X
Oxalic Acid
Palmitic Acid
Paraffin
X
Pentachlorophenol-Dry
X
Perchlorothylene
X
V
X
M
X
X
M
X
X
M
T
X
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
V
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Phosphoric Acid, 50%-85%
X
Photographic Solutions
Phthalic Anhydride
X
X
Picric Acid-Aqueous Solutions
X
W
X
V
X
P
X
X
P
X
N
X
Potassium Chloride
N
X
Potassium Cyanide
Potassium Dichromate
X
X
Potassium Fluoride
X
X
Potassium Hydroxide 30%
Potassium Nitrate
X
X
Potassium Sulfate
X
X
Proponic Acid
Propylene Glycol
X
M
X
M
X
X
O
X
X
N
X
X
M
X
X
M
X
X
P
X
M
X
Rosin
X
Salt Water
X
Shellac
X
X
M
X
X
M
X
X
X
Silicone Oil
X
Silver Nitrate
X
Soda Ash
Sodium Bicarbonate
X
Sodium Bisulfate
Sodium Borate
X
X
Sodium Carbonate
Sodium Chloride
X
Sodium Cyanide 10%
Sodium Dichromate 10%
X
Sodium Hydroxide 40%
X
Sodium Perborate
X
M
N
X
P
X
N
X
M
X
X
M
X
X
M
X
X
M
X
X
M
X
X
M
X
X
M
X
X
M
X
X
W
X
X
P
X
W
X
N
Sodium Hypochlorite
Sodium Nitrate
N
X
Silicone Fluid
Soap Solutions
M
X
X
Propylene Oxide
X
X
X
N
X
X
N
X
X
X
M
Di Basic
X
X
X
M
Tri Basic
X
X
X
M
X
X
X
M
Sodium Peroxide
Sodium Phosphate-Mono Basic
Sodium Silicate
Sodium Sulfide
Sodium Thiosulfate
X
X
Plating Solutions
Potassium Acetate
Poly Gasket
X
X
X
M
X
X
M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
Poly Gasket
Soybean Oil
X
X
X
Stannic Chloride
X
Stannous Chloride 15%
X
Stearic Acid
X
Stoddard Solvents
X
Styene
X
Sugar Liquors-Cane
X
Beet
X
X
X
Sulfate Liquors
Sulphite Liquors
Sulfuric Acid
M
M
W
X
M
X
M
X
V
X
X
P
X
X
P
X
X
M
X
X
M
SEE FOLLOWING FOR SULFURIC ACID
Sulfuric Acid-Concentrated
N
Sulfuric Acid-Dilute
N
Sulfuric Acid-0-7%
X
V
Sulfuric Acid-20% Oleum
O
Sulfuric Acid-30%
V
Sulfuric Acid-50%
V
Sulfuric Acid-85%
X
V
Sulfuric Acid-93%
X
V
Sulfuric Acid-Aq 2%
O
Sulfuric Acid-Aq 5%
O
Sulfurous Acid
X
X
M
X
M
X
X
W
X
X
M
X
X
M
X
X
V
Superphosphate
Tannic Acid 10%
Tar-Wood
X
X
Tartaric Acid
Titanium Tetrachloride-Dry
Toluene/Toluol
X
X
Tetrachloroethylene
Trichloroethylene-Dry
Triethanolamine
X
X
Trisodium Phosphate
Urea
X
X
V
X
V
X
X
N
X
X
M
X
X
M
X
P
X
P
Urine
Varnish
X
V
X
X
Vinegar
X
Water-Acid Mine
X
V
M
Deionized
X
X
P
Demineralized
X
X
P
Distilled
X
X
X
P
Fresh
X
X
X
M
Salt
X
X
X
M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® CHEMICAL RESISTANCE CHART
FLUID
Alum. Brass SST
White Liquor (Paper Ind)
X
Wine
Xylene/Xylol
X
X
X
M
X
P
X
V
Zinc Carbide
Zinc Nitrate
Poly Gasket
X
X
M
X
M
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
SIZE CHART
633A
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
6
C : OVERALL LENGTH
1 5/8
1 5/8
2
2 1/4
2 3/8
2 9/16
2 3/4
2 13/16
3 3/16
3 3/8
3 3/8
E : MIN. I.D.
9/16
3/4
7/8
1 1/16
1 3/8
1 3/4
2 3/16
2 13/16
3 3/16
4 3/4
5 7/8
F : MAX ACROSS
CORNERS OF ADAPTORS
1 3/8
1 3/8
1 11/16
1 15/16
2 1/4
2 5/8
3 1/2
4 5/16
5 9/16
6 3/8
7 3/4
633B
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
A : O.D. ARMS EXTENDED
4 5/8
4 5/8
4 15/16
7 1/2
7 13/16
7 7/8
8 3/8
10
11 1/8
B : MAX O.D.
2 1/8
2 1/8
2 1/2
3 1/4
3 5/8
4
4 1/2
5 1/2
6 5/8
10 1/4
C : OVERALL LENGTH
2 1/16
2 1/8
2 1/2
3 1/4
3 1/4
3 3/8
3 1/2
3 15/16
4
5 1/2
D : EXPOSED LENGTH
1 1/4
1 1/4
1 5/8
1 7/8
1 7/8
2 1/8
2 1/4
2 3/8
2 1/2
2 13/16
E : MIN. I.D.
9/16
3/4
1
1 1/4
1 1/2
2
2 7/16
3
4
5 3/4
16 1/4
633C
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
A : O.D. ARMS EXTENDED
4 3/8
4 15/16
7 1/4
7 1/2
7 7/8
8 3/8
10
11 1/8
12 1/8
16 1/4
B : MAX O.D.
2 1/8
2 1/2
3 1/4
3 5/8
4
4 1/2
5 1/2
6 3/8
7 1/2
10 1/4
C : OVERALL LENGTH
3 1/4
3 7/8
4 1/8
4 1/4
5
5 3/8
6 1/4
6 3/4
7 17/16
8 1/2
D : EXPOSED LENGTH
1 1/4
1 5/8
1 7/8
1 7/8
2 1/8
2 1/4
2 1/4
2 1/2
2 17/16
2 11/16
E : MIN. I.D.
5/8
7/8
1
1 1/4
1 3/4
2 1/4
2 3/4
3 1/2
4 1/2
5 11/16
633D
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
6
A : O.D. ARMS EXTENDED
4 3/8
4 3/8
4 15/16
7 1/4
7 1/2
7 7/8
8 3/8
10
11 1/8
12 1/8
16 1/4
B : MAX O.D.
2 1/8
2 1/8
2 1/2
3 1/4
3 5/8
4
4 1/2
5 1/2
6 3/8
7 9/6
10 1/4
C : OVERALL LENGTH
2
2
2 1/2
3 1/4
3 5/16
3 7/16
3 1/2
3 15/16
3 15/16
3 15/16
5 1/2
E : MIN. I.D.
3/4
7/8
1
1 3/8
1 1/2
2
2 7/16
3
3 3/4
4 3/4
5 3/4
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
HOSE SHANK SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
B : MAX O.D.
1 3/8
1 5/8
1 15/16
2 1/4
2 7/8
3 3/8
4
5 1/4
6 5/16
7 3/8
C : OVERALL LENGTH
3 7/16
4 1/16
4 5/16
4 1/2
5 1/8
5 5/8
6 1/2
7
7 3/4
8 13/16
D : EXPOSED LENGTH
1 7/16
1 13/16
2 1/16
2 1/8
2 3/8
2 1/2
2 1/2
2 3/4
2 3/4
3 1/16
E : MIN. I.D.
1/2
3/4
15/16
1 1/4
1 3/4
2 1/4
2 1/4
3 1/2
4 1/2
5 9/16
633E
6
633F
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
6
C : OVERALL LENGTH
2 5/16
2 5/16
2 13/16
3 1/16
3 3/16
3 9/16
4
4 1/16
4 11/16
5
D : EXPOSED LENGTH
1 1/2
1 1/2
1 13/16
2 1/16
2 1/8
2 1/2
2 3/4
2 13/16
3 3/16
3 3/8
E : MIN. I.D.
9/16
3/4
15/16
1 1/8
1
7/1w6
1 13/16
2 3/16
2 7/8
3 13/16
5 7/8
F : MAX ACROSS
CORNERS OF ADAPTORS
1 5/16
1 5/16
1 5/8
1 7/8
2 1/4
2 7/8
3 3/8
4 5/16
5 1/2
2 3/4
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
5
6
SIZE CHART
634A
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
B : MAX O.D.
1 5/16
1 5/16
1 1/2
1 13/16
2 1/8
2 1/2
3
3 5/8
4 3/4
5
6
6 15/16
C : OVERALL LENGTH
1
1
1 5/16
1 9/16
2 7/8
2 3/16
2
2 1/16
2 1/8
2 9/16
G : CHAIN LUG HEIGHT
3/8
3/8
3/8
1/2
1/2
9/16
9/16
5/8
7/16
5/8
SIZE (IN)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
THREAD SIZE
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
A : O.D. ARMS EXTENDED
4 11/16
4 11/16
4 15/16
7 1/4
7 1/2
7 7/8
8 3/8
10
11 1/8
12 1/8
16 1/4
B : MAX O.D.
2 1/8
2 1/8
2 1/2
3 1/4
3 5/8
4
4 1/2
5 1/2
6 5/8
7 1/2
10 1/4
C : OVERALL LENGTH
1 3/8
1 3/8
1 5/8
1 7/8
1 15/16
2 1/8
2 1/4
2 15/16
2 3/8
2 5/8
2 7/8
G : CHAIN LUG HEIGHT
7/16
7/16
1/2
1/2
1/2
3/8
1/2
7/16
1/2
1/2
1/2
634B
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
6
WEIGHT CHART
(expressed in Pounds)
633A- ADAPTOR
FEMALE N.P.T.
633B- COUPLER
MALE N.P.T
SIZE
ALUMINUM
BRASS
1/2”
0.125
0.137
3/4”
0.063
0.250
1”
0.125
1 1/4”
0.187
1 1/2”
2”
633E- ADAPTOR
HOSE SHANK
ALUMINUM
BRASS
3/4”
0.125
0.375
0.375
1”
0.187
0.500
0.825
1 1/4”
0.250
0.875
0.250
0.937
1 1/2”
0.437
1.187
0.375
1.187
2”
0.625
1.937
633D- COUPLER
FEMALE N.P.T
1/2”
2 1/2”
0.662
1.876
2 1/2”
0.875
2.500
3”
0.812
2.560
3”
1.312
3.182
4”
1.562
4.812
4”
2.625
8.312
5”
1.812
5.436
5”
4.150
6”
2.437
7.311
6”
4.625
SIZE
ALUMINUM
BRASS
SIZE
ALUMINUM
BRASS
1/2”
0.187
0.375
1/2”
0.062
0.437
3/4”
0.187
0.438
3/4”
0.062
0.376
1”
0.313
0.875
1”
0.187
0.625
1 1/4”
0.625
1.500
1 1/4”
0.375
1.125
1 1/2”
0.687
1.500
1 1/2”
0.375
1.187
2”
0.750
1.750
2”
0.500
1.625
633F- ADAPTOR
MALE N.P.T.
2 1/2”
1.187
3.062
2 1/2”
0.687
2.375
3”
1.500
3.650
3”
1.000
3.125
4”
2.370
6.375
4”
2.000
6.187
6”
5.625
16.875
SIZE
ALUMINUM
BRASS
5”
633C- COUPLER
HOSE SHANK
SIZE
5”
634A- DUST PLUG
1/2”
6”
3.437
SIZE
ALUMINUM
BRASS
1/2”
0.125
0.312
3/4”
0.125
0.562
3/4”
0.125
0.312
1”
0.312
0.875
1”
0.187
0.437
1 1/4”
0.687
1.500
1 1/4”
0.250
0.687
1 1/2”
0.812
1.562
1 1/2”
0.250
0.687
2”
0.937
2.062
2”
0.375
1.062
2 1/2”
1.625
2.610
2 1/2”
0.500
1.500
3”
2.000
5.250
3”
0.687
2.250
4”
3.812
10.062
4”
1.062
3.375
5”
4.812
5”
1.375
6”
6.937
6”
2.000
SIZE
ALUMINUM
BRASS
SIZE
ALUMINUM
1/2”
0.187
0.687
1/2”
0.200
0.437
3/4”
0.230
0.625
3/4”
0.200
0.437
1”
0.312
0.875
1”
0.312
0.687
1 1/4”
0.687
1.500
1 1/4”
0.687
1.400
1 1/2”
1.000
1.562
1 1/2”
0.625
1.250
2”
1.187
2.062
2”
0.812
1.437
2 1/2”
1.662
2.610
2 1/2”
0.875
2.125
3”
1.875
5.250
3”
1.625
3.000
4”
2.812
10.062
4”
2.082
5.187
5”
3.690
5”
3.000
6”
6.063
6”
4.375
634B- DUST CAP
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
BRASS
SAFETY AND USE INSTRUCTIONS
Product Selection
Operation and Design Principle
Armor Products Inc.’s line of Kamlok® quick couplings
come in many styles and sizes designed for multiple
connection designs. Our products are produced for
specific requirements with large safety margins.
The principle behind the design of Kamlok®
It is ultimately the responsibility of the end user(s) to
communicate to the distributor the operating conditions,
application, and material to be handled by the Kamlok®.
It is up to the distributor to supply the correct type, size
and material of construction for the application to which
the Kamlok® will be subjected. Armor Products Inc’s sales
department is available to assist with proper Kamlok®
recommendations.
For each application and use, care must be taken to
insure proper connection and a positive leak free seal.
Improper selection and/or improper use could result in a
serious accident causing injury to the operator or
bystanders. Extensive downtime could also result from
improper selection. Under no circumstances should the
pressure or temperature ratings of the Kamloks® be
couplings is simple. The pivot pins for the coupler
cam arms, which lock into the groove, are located
so that when line pressure increases and attempts
to push the coupler and adaptor apart, the bottom
edge of the adaptor groove pushes with equal
pressure against the under side of the cam arm
increasing the locking action. When properly
coupled, line pressure will not separate a Kamlok®
connection within the recommended pressure limits.
To use, simply insert the adaptor into the coupler
until the adaptor makes contact with the gasket. Both
cam arms are then closed simultaneously to assure
uniform and equal gasket compression between the
coupler and adaptor. Kamlok® couplers require a
maximum (depending on size) of 45 pounds of force
to securely lock the coupler and adaptor together
producing a positive seal. To assure a positive seal,
both the adaptor face and gasket must be smooth
and uncontaminated with foreign substances.
exceeded.
Traditional cam and groove couplings are designed to
be either fully closed or fully open. OPW Kamloks®
Maintenence
Kamlok® couplings and adaptors should be well
maintained and inspected on a regular basis, especially
when the conditions of service include high working
pressures and/or the transfer of hazardous or flammable
materials. Regular inspections will detect signs of wear,
deterioration and/or damage before failure.
Only use gaskets recommended and approved by
Armor Products Inc.’s for use in our products. Seal materials
recommended have their limitations and should be
inspected frequently upon initial installation to help
establish a service cycle for replacement. Replace a
gasket when it becomes hard, brittle, or loses the
characteristics to properly perform as intended.
Seal surfaces on both the coupler and adaptor should be
checked for signs of wear or corrosion. The adaptor
should be checked for excessive wear on the groove
where the cam-arms make contact. Cam arm and pins
should also be inspected for excessive wear. Worn or
damaged cam arms or pins can prevent proper coupler
operation. Cam arm replacement kits are available
for all sizes.
with the Twin-Kam® designed arms offer additional steps
of holding power prior to total disconnection. With one
arm locked down firmly and the other in the detent
position, the adaptor will remain secure in the coupler.
Both arms in the detent position, adaptor remains
secure in the coupler. Line pressure increases the resistance
to open arms beyond this point. With one arm
fully released and the other in the detent position,
gasket compression will be lost, however the adaptor
will remain securely in place.
Should there be a need or requirement for a more
positive and secure lock or seal, we offer the Clip-Lok
which can be installed on couplers and caps. The ClipLok is designed so that when the arms are fully closed
a patented locking mechanism snaps into the “thumbprint”
on the cam arm. The cam arms will remain closed
until the operator releases the locking mechanism by
simply pushing on a tab located on the opposite side.
The Clip-Lok is ideal to secure a positive seal for high
vibration applications or when more assurance of accidental
uncoupling is requested.
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
KAMLOK® COUPLING
How it Works...
1.
With one arm locked down firmly and the other arm in the unique
detent position, the adaptor remains secure in the coupler.
The chart above illustrates why the “feel” of the cam
action is different from traditional styles and why the
Twin-Kam® Kamlok® Coupler Arm is held firmly against
the adaptor in the unique 45º detent position.
2.
With both arms in detent position, the adaptor remains
secure in the coupler. Line pressure increases
resistance to open arms beyond this point.
Note: Specifications and materials subject
to change without written notice.
3.
With one arm fully released and the other arm in
detent position, the gasket compression is lost
while the adaptor remains securely in place.
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation
Product Warranty
Caution!
Armor Products Inc.’s parts and products are thoroughly
inspected and tested from the time that raw material is
received at our plant until the product is completed. We
fully guarantee that all materials and workmanship are free
of defects for a period of one (1) year from date of invoice.
Any product that might prove to be defective will promptly
be repaired or replaced at Armor Products Inc.’s option. This
warranty does not apply to any inoperative or defective
products when such failures are the result of the method or
conditions of their use. This warranty is null and void if the
product is altered in any way. We are not liable for
labor, special or consequential damages and
under no circumstances any charges in excess of invoice
amount of defective products.
Armor Products Inc’s Kamloks® are recommended for use in
handling liquids and non-compressible fluids. The use of
Kamloks® for handling compressible media such as air or
steam, can create a hazardous condition and serious injury
may occur to the operator, should the fittings be un-coupled
while the line is under pressure. Armor Products Inc.’s Kamlok®
fittings are capable of handling compressed media within the
pressure and temperature limitations specified in this catalog;
however, no warranty is expressed or implied by Armor Products
Inc. as to their suitability or fitness for any particular use.
Armor Products Inc.’s products should be used in compliance
with applicable federal, state, and local laws and regulations.
Product selection should be based upon physical
specifications, limitations, and compatibility with the
environment and material to be handled.
Shipping Terms & Conditions
All Orders are solicited & accepted with the understanding that the purchaser agrees to the following:
1) Orders are subject to approval and acceptance by Armor Products, Inc.
2) We attempt to ship all orders as promptly as possible; Armor Products Inc. will not be liable for any
losses or damages resulting from any delay or shipment of delivery due to any cause.
3) Price and design of products subject to change without notice.
4) Shortages of shipment must be reported within 5 days after receipt of goods
1-888-417-49697 • Local: 513-923-5906 • Fax: 513-923-5907
www.armorproductsinc.com • [email protected]
Kamlok® is a registered trademark of Delaware Capital Formation