Picture Precision!

Transcription

Picture Precision!
Picture Precision!
Congratulations on purchasing your DStv HD PVR 2 P (High Definition Personal Video Recorder)
Decoder!
The HD PVR is revolutionising the television experience, with lifelike viewing, sharper images, more
vibrant colours and precision picture quality.
Now, on all High Definition content viewed with the HD PVR, you can enjoy colours so rich and a picture
so sharp, you can see every face in the crowd. You’ll be wowed!
Welcome to the world of High Definition with DStv.
Your HD PVR 2 P will allow you to do some amazing things, including :
•
•
•
•
•
•
•
Record 150 hours of standard TV or 50 hours of HD TV
View 1 and record 1 simultaneously
Pause Live TV programming (for up to 2 hours)
Rewind Live TV programming
Fast forward
View in slow motion
XtraView capability
Please use this Viewer’s Guide to familiarise yourself with the functions and features your new HD PVR
has to offer.
Enjoy the future of television – High Definition with precision picture.
Kind regards,
Nolo Letele
CEO MultiChoice SA Group
TABLE OF CONTENTS
GETTING STARTED .......................................................................................................................................................... 4
FRONT PANEL ................................................................................................................................................................... 5
BACK PANEL ..................................................................................................................................................................... 6
IMPORTANT SAFETY INFORMATION .............................................................................................................................. 7
INSTALL & CONNECT THE HD PVR ................................................................................................................................. 8
Connecting the HD PVR to the Satellite Dish .......................................................................................................... 9
Set-up 1 : HD PVR and 1 HD TV .......................................................................................................................... 10
Set-up 2 : HD PVR, 1 HD TV and a Home Theatre System .................................................................................. 10
Set-up 3 : HD PVR and a Standard Definition TV ................................................................................................. 11
THE HD PVR REMOTE CONTROL ................................................................................................................................. 12
Remote Control Basics .......................................................................................................................................... 13
TV, ALT, TV Guide, Language and Mute Buttons ................................................................................................. 13
The Dial ................................................................................................................................................................. 13
Colour Buttons ...................................................................................................................................................... 14
Action Buttons ....................................................................................................................................................... 14
THE BASICS ..................................................................................................................................................................... 15
The i-Plate : Normal .............................................................................................................................................. 15
The i-Plate when "Banner Browsing" ..................................................................................................................... 16
The i-Plate : Extended Mode ................................................................................................................................. 17
Viewing Modes ...................................................................................................................................................... 18
The Channel Grids ................................................................................................................................................ 18
Reminders ............................................................................................................................................................. 19
Interactive Services and DStv touch ..................................................................................................................... 20
Parental Control .................................................................................................................................................... 20
Language Selection .............................................................................................................................................. 20
Subtitles / Teletext ................................................................................................................................................. 20
DStv Audio Channels ............................................................................................................................................ 20
THE TV GUIDE ................................................................................................................................................................. 21
Favourite Channels ............................................................................................................................................... 21
All Channels .......................................................................................................................................................... 22
PVR BASICS .................................................................................................................................................................... 23
The Buffer ............................................................................................................................................................. 23
What is Live TV? ................................................................................................................................................... 23
Automatic Standby ............................................................................................................................................... 23
The Status Bar ...................................................................................................................................................... 24
PVR ICONS ...................................................................................................................................................................... 26
SETTING RECORDINGS AND THE SCHEDULED RECORDINGS SCREEN ................................................................ 28
How to set a recording ......................................................................................................................................... 28
The Scheduled Recordings Screen ....................................................................................................................... 33
VIEWING YOUR RECORDINGS ...................................................................................................................................... 35
OTHER FEATURES ......................................................................................................................................................... 37
Extending a recording in progress ......................................................................................................................... 37
Stopping a recording in progress .......................................................................................................................... 37
Bookmarks ............................................................................................................................................................ 37
Slow Motion ........................................................................................................................................................... 37
The Safety Net ...................................................................................................................................................... 38
Fast Forwarding .................................................................................................................................................... 38
Rewinding ............................................................................................................................................................ 39
HD PVR 2 P Viewer’s Guide (v1.2)
Page 2 of 60
THE DECODER MENU .................................................................................................................................................... 40
THE DECODER MENU - INFORMATION CENTRAL (#1) ............................................................................................... 41
Information Central Menu ...................................................................................................................................... 41
Information Central ................................................................................................................................................ 41
Hardware Status .................................................................................................................................................... 42
Tuner Status .......................................................................................................................................................... 43
Signal Status ......................................................................................................................................................... 43
THE DECODER MENU - PARENAL CONTROL (#2) ....................................................................................................... 44
Global Blocking ..................................................................................................................................................... 44
Parental Guidance Settings ................................................................................................................................... 44
Channel Blocking ................................................................................................................................................... 45
Changing the PG PIN Code .................................................................................................................................. 45
THE DECODER MENU - PERSONALISE (#3) ................................................................................................................. 46
Aspect Ratio .......................................................................................................................................................... 46
Language Options ................................................................................................................................................. 47
Surround Sound .................................................................................................................................................... 47
Safety Net Settings ............................................................................................................................................... 48
Display Timeout .................................................................................................................................................... 48
Transparency ........................................................................................................................................................ 48
Automatic Standby ............................................................................................................................................... 48
THE DECODER MENU - ADVANCED OPTIONS (#4) ..................................................................................................... 49
Network Set-up ..................................................................................................................................................... 49
Equipment Set-up ................................................................................................................................................. 50
XtraView Set-up ..................................................................................................................................................... 51
PVR Clean-up ....................................................................................................................................................... 51
DSD Upgrade ........................................................................................................................................................ 52
FACTORY DEFAULTS ..................................................................................................................................................... 53
SPECIFICATIONS ............................................................................................................................................................ 54
LEGAL MATTERS ............................................................................................................................................................ 56
PRODUCT WARRANTY ................................................................................................................................................... 58
TROUBLESHOOTING / HOTLINES ................................................................................................................................. 60
The whole of the HD PVR Viewer’s Guide, including the graphics, menus and information
contained herein are the subject of intellectual property rights, including copyright, under
domestic law and international conventions. All rights are reserved.
The HD PVR Viewer’s Guide supplements the information supplied with the packaging of the
HD PVR 2 P.
Due to software upgrades, the features and functionalities in this HD PVR Viewer’s Guide may
differ from those on your HD PVR. Please visit www.dstv.com for the latest Viewer’s Guide.
HD PVR 2 P Version 1.2 (Feb 2010) e&oe
HD PVR 2 P Viewer’s Guide (v1.2)
Page 3 of 60
GETTING STARTED
The following items are included when you purchase the HD PVR 2 P :
1 x DStv HD PVR 2 P Decoder
1 x Smartcard
1 x Remote Control
2 x AA Batteries
®
1 x Standard HDMI Cable
1 x Audio / Video Cable
1 x Power Cable
1 x External Power Supply
1 x HD PVR Viewer’s Guide
HD PVR 2 P Viewer’s Guide (v1.2)
Page 4 of 60
FRONT PANEL
1
V+ / V-
Increases / decreases volume.
2
P+ / P-
Changes to the next / previous channel.
3
Play/Pause
Same function as play/pause on the remote control.
4
RESET
Reboots the decoder.
5
UHF
Displays UHF screen.
6
TV/AUDIO
Switches between TV and Audio services.
7
Power button
Switches the decoder between ON and STANDBY modes.
8
LED / Front Panel
Display
Displays the state of the PVR :
9
Audio Icon
Indicates that decoder is tuned to an audio channel.
10
Alert icon
Indicates an error condition.
11
Mail message icon
Indicates an unread mail message.
12
REC icon
Indicates a recording in progress.
13
Ethernet port
Reserved for future use.
14
Smartcard slot
Insert smartcard carefully. The smartcard may protrude from the slot.
Do not force the smartcard.
HD PVR 2 P Viewer’s Guide (v1.2)
o
o
When the decoder is in standby – displays the current time.
When tuned to TV or Audio channels – displays the channel
number.
Page 5 of 60
BACK PANEL
1
Satellite / Tuner Inputs 1 & 2
Connect to the 2 LNB feeds from the dish.
If using a SatCR LNB feed, connect to LNB input 1.
2
S/PDIF Digital Audio Out
Connect to the optical input on the Home Theatre amplifier
or TV.
3
Coaxial Digital Audio Out
Connect to the coaxial input on the Home Theatre amplifier
or TV.
4
Audio Left and Audio Right
Connect to the audio inputs on the TV or to the Home
Theatre amplifier.
5
Composite Video Out
Connect to the video input on the TV.
6
HDMI
Connect to the HDMI input on the HD TV or Home Theatre
system.
7
Ethernet
Reserved for future use.
8
USB
Reserved for future use.
9
RF In and RF Out
Connect RF In to the terrestrial antenna.
Connect RF Out to the TV antenna input.
10
Power In Connector
Connect to the mains supply using the power cable and
external power supply.
If you have technical
comments or want to
chat to other users about
the installation and
connection of the HD
PVR, visit the forums at
www.dstv.com
HD PVR 2 P Viewer’s Guide (v1.2)
HD quality content is
only available via HDMI.
The HDMI input on the
HD TV must be HDCP
compliant.
Page 6 of 60
IMPORTANT SAFETY INFORMATION
This DStv HD PVR 2 P Decoder meets International Safety Standards. Please read the following
recommended safety precautions carefully.
MAINS SUPPLY
This HD PVR operates at 12 V DC and is connected to the mains supply using the supplied power
supply, rated 85 - 288 V AC, 47 - 63Hz. Connect the power supply unit to the HD PVR and the power
cable to the power supply unit, before connecting the other end of the power cable to the mains wall
socket. Disconnect the power supply unit from the mains before connecting or disconnecting any other
cables to the HD PVR's back panel.
LIQUIDS & SPILLAGE
Keep liquids away from the decoder and do not put anything on top of it which may spill (example : lit
candles, plants or containers of liquid).
Do not use the decoder in extreme temperature and humid conditions.
CLEANING
Before cleaning the decoder, first disconnect the decoder from the mains. Use a dry cloth to clean the
exterior.
VENTILATION
Do not block the ventilation holes and ensure that free airflow is maintained around the decoder. It is
essential to keep the HD PVR cool to prolong the life of the hard disk.
Never stand the decoder on soft furnishings or on carpet.
Do not use or store the decoder near a heater or where it is exposed to direct sunlight.
Never stack other electronic equipment on top of, or below the decoder.
SERVICING
Do not attempt to repair the decoder yourself. You should also never remove the cover of the decoder.
Any tampering with the decoder will invalidate the warranty. Refer all servicing to a qualified MultiChoice
Agent, Branch or Accredited Installer.
LIGHTNING
If the decoder is installed in an area subject to intense lightning activity, protection devices for the power
supply unit’s mains connector are recommended.
EARTHING
The earthing system must comply with local regulations.
HARD DISK
To avoid possible damage to the internal hard disk, do not pick up or move the HD PVR while it is
connected to the power supply. If you want to move the HD PVR, first stop any recording, then put the
HD PVR into standby, and then wait 30 seconds before disconnecting it.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 7 of 60
INSTALL & CONNECT THE HD PVR
Due to the many potential configurations in each home and the variety of equipment available, it is not
possible to cover every potential installation scenario. This guide offers information on connecting the
HD PVR to the satellite dish as well as 3 basic set-up options :
o
o
o
Set-up 1 : HD PVR and 1 HD TV
Set-up 2 : HD PVR, 1 HD TV and a Home Theatre System
Set-up 3 : HD PVR and 1 Standard Definition TV
We encourage customers with technical queries to contact a MultiChoice Accredited Installer and to
make use of the technical forums on www.dstv.com.
IMPORTANT
MultiChoice recommends that installations and
connections of the HD PVR are done by a MultiChoice
Accredited Installer.
The HD PVR is designed to work with a dual LNB
installation (minimum) or a one wire SatCR installation.
If your TV is marketed as “HD Ready” and does not
work with the HD PVR, we suggest you check the
components and / or contact the manufacturer of the
TV for assistance.
HD quality
content is only
available via HDMI.
The HDMI input on the
HD TV must be HDCP
compliant.
HD PVR 2 P Viewer’s Guide (v1.2)
If the HD PVR is
being linked to another
XtraView decoder, visit
www.dstv.com for full
XtraView info (including
detailed installation
options and a guide to
installation prices).
Page 8 of 60
CONNECTING THE HD PVR TO THE SATELLITE DISH
Please consult with a MultiChoice Accredited Installer for the most cost effective solution to suit your
requirements.
OPTION 1 : CONNECT USING A DUAL (2-WIRE) LNB
OPTION 2 : CONNECT USING A SATCR LNB (UNICABLE LNB)
HD PVR 2 P Viewer’s Guide (v1.2)
Page 9 of 60
SET-UP 1 : HD PVR AND 1 HD TV
➊
➋
➌
Connect the two satellite feeds to the two LNB inputs (#1) on the HD PVR. If using a
SatCR LNB feed, connect to LNB input 1.
Connect the HDMI cable to the HDMI input on the HD TV and to the HDMI connector (#6)
on the HD PVR.
Ensure that all connections are firm before you connect the external power supply (#10).
Note : The HDMI input on the HD TV must be HDCP compliant.
SET-UP 2 : HD PVR, 1 HD TV AND A HOME THEATRE SYSTEM
➊
➋
Connect the two satellite feeds to the two LNB inputs (#1) on the HD PVR. If using a
SatCR LNB feed, connect to LNB input 1.
Option A : Digital audio via HDMI
o
o
➌
Connect the HDMI cable to the HDMI input on the Home Theatre System and to the
HDMI connector (#6) on the HD PVR.
Connect a second HDMI cable from the Home Theatre HDMI output, to the HD TV
HDMI input.
Option B : Digital audio via Optical or Coaxial connectors
o
o
o
Connect a S/PDIF optical cable from the digital audio connector (#2) on the HD PVR
to the Home Theatre’s optical input.
Alternatively, connect a single phono-cable from the coaxial connector (#3) on the HD
PVR to the Home Theatre’s coaxial input.
Connect the HDMI cable to the HDMI input on the HD TV and to the HDMI connector
(#6) on the HD PVR.
Note : the cable for the coax digital audio (S/PDIF) out connector should be 75 ohm coaxial cable (with
phono connectors), not standard audio cable (which can degrade performance).
➍
Ensure that all connections are firm before you connect the external power supply (#10).
HD PVR 2 P Viewer’s Guide (v1.2)
Page 10 of 60
SET-UP 3 : HD PVR AND 1 STANDARD DEFINITION TV
➊
➋
Connect the two satellite feeds to the two LNB inputs (#1) on the HD PVR. If using a
SatCR LNB feed, connect to LNB input 1.
Option A : AV Connectors
o
➌
Option B : RF
o
o
➍
Connect the Audio / Video cable to the video (#5) and audio (#4) outputs on the HD
PVR and then to the audio and video inputs on the TV.
Connect the cable from the terrestrial antenna to the female F-type adaptor and
connect the female F-type adaptor to the aerial IN connector (#9 – marked RF IN) on
the HD PVR.
Connect a RF cable to the male F-type adaptor and connect the male F-type adaptor
to the aerial OUT connector (#9 – marked RF OUT) on the HD PVR. Then connect
the other end of the RF cable to the aerial IN connector on the TV. (You may need an
adaptor).
Ensure that all connections are firm before you connect the external power supply (#10).
HD PVR 2 P Viewer’s Guide (v1.2)
Page 11 of 60
THE HD PVR REMOTE CONTROL
REMOTE CONTROL BASICS
HD PVR 2 P Viewer’s Guide (v1.2)
Page 12 of 60
TV, ALT, TV GUIDE, LANGUAGE AND MUTE BUTTONS
The five buttons at the top of the remote control each have a secondary function (sometimes referred to
as the “shifted” mode).
If you have not first pressed SHIFT, these buttons do the following :
o
TV : always takes you to Live TV. If you are viewing from the buffer, pressing TV takes you to Live
TV on the current channel. If you are viewing in playback, pressing TV stops playback and takes
you to Live TV on the current channel.
o
ALT : goes to the last viewed channel.
o
TV GUIDE : goes to the TV Guide.
o
LANGUAGE : displays the Language / Soundtrack pop-up.
o
MUTE : switches the audio on or off (depends on the current audio status).
To activate the secondary functionality, press SHIFT followed by the required button. After pressing
SHIFT, the SHIFT button will flash, confirming the mode of the remote control. It is not necessary to hold
both buttons down at the same time.
o
SHIFT TV : goes to the Audio Bouquet.
o
SHIFT ALT : displays the Subtitles / Teletext pop-up
(Note : Subtitles / Teletext are not currently available on the HD PVR).
o
SHIFT TV GUIDE : currently disabled.
o
SHIFT LANGUAGE : goes to the Parental Control Menu
(Note : a valid PG PIN code is required to enter the Parental Control Menu).
o
SHIFT MUTE : currently disabled.
THE DIAL
The dial should be set to TV1 for use with the HD PVR.
The “window” in the dial (where you see TV1) lights up when any button is pressed, confirming that the
remote control is active and that the command has been transmitted to the decoder.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 13 of 60
COLOUR BUTTONS
The colour buttons on the remote control have different functions at different times based on the current
activity of the HD PVR.
When using the Decoder Menu or the TV Guide, please refer to the onscreen instructions (at the bottom
of the screen) that clearly indicate functionality for each colour button.
When viewing TV, the colour buttons do the following :
o
Press RED to go to the Playlist (see page 35).
o
Press BLUE to insert a Bookmark (see page 37).
o
Press WHITE to view in slow motion (see page 37).
o
Press YELLOW to display the Status Bar (see page 24).
o
The GREEN button is currently disabled in viewing mode.
ACTION BUTTONS
BUTTON
WHILE VIEWING LIVE TV
WHILE VIEWING A
RECORDING (PLAYBACK)
STOP
Button disabled if there is no recording in
progress.
If there is a recording in progress, you are
able to stop the recording.
Stops playback and returns to
the Playlist.
REWIND
Press once = Instant Replay (rewinds 10
seconds) *
Press once = Instant Replay
(rewinds 10 seconds)
Hold = rewinds programme.
Hold = rewinds programme.
See page 39
* only where the buffer is available (see page 23).
PLAY / PAUSE
Toggles between PLAY and PAUSE.
Toggles between PLAY and
PAUSE.
FAST FORWARD
Button disabled (unless in buffer).
Fast Forwards recorded
programme.
Schedules a recording (see page 28).
Button disabled.
See page 38
REC
IMPORTANT
PVR functionality (including Pause Live TV, scheduling
and viewing recordings) requires a PVR subscription.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 14 of 60
THE BASICS
THE I-PLATE : NORMAL
The information plate (i-Plate) is displayed when you press i.
1
Instruction bar – provides helpful information and available options.
2
i-Plate Header.
3
Starting times of programme.
4
Current time.
5
Channel number & name.
6
Favourites Icon - indicates that this channel has been selected as a Favourite Channel (see
page 21).
7
Today’s date.
8
PVR Icons (see page 26).
9
Programme titles.
10
PG Lock & PG Rating.
11
Press the DOWN arrow to access programming information for the next 24 hours on this
channel.
The colour of the i-Plate
indicates the viewing mode (see
page 18).
A blue header indicates that you
are in ALL CHANNELS.
A purple header indicates that you
are in FAVOURITE CHANNELS.
You can personalise the time
for which the i-Plate is displayed.
Press MENU.
Select Personalise.
Go to #5 (Display Timeout).
Follow the onscreen instructions.
An aqua blue header indicates that
you are viewing a recording.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 15 of 60
THE I-PLATE WHEN “BANNER BROWSING”
If you want to see what’s on other channels, press i (to display the i-Plate) and then use the left and
right arrows to view the programming information for other channels. This is called “banner browsing”.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 16 of 60
THE I-PLATE : EXTENDED MODE
To view more information on a highlighted programme, press i to display the extended information. You
can also “banner browse” in extended mode.
1
Extended information header.
2
Live TV / Buffer indicator.
3
Viewing mode - All Channels or Favourite Channels (see page 18).
4
Programme title.
5
Channel number & name.
Programme start and end time.
Date of programme.
6
PVR icons, example Scheduled Recording icon (see page 26).
7
Synopsis (programme information).
8
PG information.
9
Current time.
10
Current channel number & name.
11
Today’s date.
12
i-Plate header.
13
Starting times of programmes.
14
Press the DOWN arrow to access programming information for the next 24 hours on this
channel.
15
PVR Icons (see page 26).
16
Programme titles.
17
PG Lock & PG Rating.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 17 of 60
VIEWING MODES
The HD PVR has two viewing modes - All Channels or Favourite Channels.
o
In All Channels mode, ALL available channels are displayed, including those to which you are not
subscribed.
o
In Favourite Channels mode, only the channels you selected as your Favourite Channels are
available when you banner browse or surf through the channels, so no more tripping over unwanted
channels. (For more on how to set up your Favourite Channels, see page 21.)
The colour of the i-Plate
indicates the viewing mode.
A blue header indicates that
you are in ALL CHANNELS.
When viewing Live TV, you
can switch viewing mode by
pressing TV and selecting the
other mode from the pop-up
which displays.
A purple header indicates that
you are in FAVOURITE
CHANNELS.
THE CHANNEL GRIDS
There are two channel grids on the HD PVR - the All Channels Grid and the Favourite Channels Grid
(one for each viewing mode).
The channel grid is a quick way to tune between channels or to quickly access programming info for
another channel.
Both channel grids are available from playback (ie. when viewing a recording).
When viewing TV, press the LEFT, RIGHT or DOWN
arrow to display the All Channels Grid.
Use the arrows to move the
highlight and press OK to tune to
the selected channel, or press i to
view extended info.
HD PVR 2 P Viewer’s Guide (v1.2)
When viewing TV, press the UP arrow to display the
Favourite Channels Grid.
The channel grid used to tune
between channels determines
which viewing mode you go to. If
you want to go to the All Channels
viewing mode, use the All
Channels Grid to change channels.
Page 18 of 60
REMINDERS
There are two types of reminders - banner and autotune, and these are used to either “remind” you of a
programme or to automatically tune the decoder to a channel at a specific time.
A banner reminder will display a pop-up at the start of the programme for which the reminder is set. You
may ignore the reminder or choose to tune to the selected programme by pressing OK.
An autotune reminder can tune the decoder to another channel, but first displays a pop-up at the start of
the programme for which the reminder is set. You may cancel the reminder or tune to the selected
programme. If you do nothing, the decoder will automatically tune to the selected channel.
How to Set a Reminder
o
To set a banner reminder, select the required programme (either on the i-Plate or TV Guide) and
press OK. A
o
appears next to the programme, confirming that a banner reminder has been set.
To change the reminder from a banner to an autotune, press OK again. The icon changes to a
confirming that an autotune banner has been set.
All scheduled reminders are listed on the Reminders screen.
How to Delete a Reminder
o
o
Option 1 : Highlight the programme which has the autotune reminder set for it and press OK.
Option 2 : You can also delete reminders by going to the Reminders screen.
The Reminders Screen
This screen lists all current reminders that have been set. To go to the Reminders screen, press RED to
go to the Playlist, then press the RIGHT arrow twice. You can delete scheduled reminders (by pressing
RED).
HD PVR 2 P Viewer’s Guide (v1.2)
Page 19 of 60
INTERACTIVE SERVICES & DSTV TOUCH
To access available interactive services, press OK to display the DStv touch menu.
Interactive
Services are only
available when viewing
Live TV, ie. you cannot
access DStv touch
when viewing from the
buffer or in Playback.
Using Interactive
Services clears the
buffer.
PARENTAL CONTROL
The HD PVR has a Parental Control feature to control viewing in your home. Access to this feature is
controlled by the PG PIN code. For full details on this feature, including how to set Parental Control and
change the PG PIN Code, see page 44.
LANGUAGE SELECTION
Some programmes have multiple language or soundtrack options available.
For a list of available options on the programme that you are viewing, press LANGUAGE. You can set
the default in the Decoder Menu (see page 47).
SUBTITLES / TELETEXT
Subtitles and Teletext are not currently supported on the HD PVR.
DSTV AUDIO CHANNELS
DStv has a great selection of audio channels available. To go to audio channels :
o
o
o
Press SHIFT TV, or
Press TV GUIDE and select the required audio channel from the All Channels list.
To return to TV channels, press SHIFT TV again.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 20 of 60
THE TV GUIDE
You can go to the TV Guide by pressing TV GUIDE at any time. The TV Guide has three sections Favourite Channels, All Channels and Playlist.
While using the TV Guide, the channel or recording you were viewing when you pressed TV GUIDE is
displayed in the top right corner.
FAVOURITE CHANNELS
When first selecting Favourite Channels, you will need to select channels as your “Favourites”. This will :
o
o
o
Create a personalised TV Guide, listing the information for just these channels.
Create a personalised "viewing mode", which includes only these channels. This means that when
"surfing" through the channels, you no longer see channels that are not available to you or may not
be of interest to you. See page 18.
Create a Favourite Channels Grid - listing only the channels you selected, making it easier to tune
between channels. See page 18.
Once you have selected your Favourite Channels, a personalised TV Guide is displayed.
You can update your selection of
Favourite Channels at any time.
Press TV Guide.
Select Favourite Channels.
Press WHITE.
Follow the onscreen instructions.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 21 of 60
ALL CHANNELS
This option supplies 8 days of programming information for all channels (where available).
You can select to view information either “by time” or “by channel” – press YELLOW to change the
display.
Press P+ to go to the next day and use the arrow keys to move the highlight.
The mini i-Plate at the bottom of the screen gives more information on the highlighted programme. To
view full information for the programme press i.
View by Time
HD PVR 2 P Viewer’s Guide (v1.2)
View by Channel
Page 22 of 60
PVR BASICS
IMPORTANT
PVR functionality (including Pause Live TV, scheduling
and viewing recordings) requires a PVR subscription.
THE BUFFER
The buffer is the part of the hard disk that temporarily records Live TV and allows you to pause or
rewind Live TV. On the HD PVR, the buffer always stores the last 120 minutes or up to the last time you
changed channels (if within the last 120 minutes). The buffer is cleared :
o
o
o
o
o
When you change channels.
When the decoder is reset.
When the decoder is rescanned.
When the decoder is in standby.
When you use an Interactive Service.
WHAT IS LIVE TV?
Live TV is when you are viewing programmes as they are being broadcast, ie. you have not pressed
pause.
How do I know when I’m viewing Live TV?
Press i (to display the i-Plate). If you are viewing Live TV, the Live TV icon
right corner.
is displayed in the top
If you are viewing behind Live TV, ie. from the buffer, a timer is displayed in the top right corner
indicating how far you are behind Live TV. See page 26.
AUTOMATIC STANDBY (ALSO KNOWN AS SLEEP MODE)
You have the option to disable the hard drive during periods when you are not using the PVR. When
the HD PVR is in automatic standby, the hard disk goes to “sleep”. To change the settings for
Automatic Standby, see page 48.
Recordings are not impacted by standby and still take
place if the decoder is in automatic standby.
If an autotune reminder triggers while the HD PVR is in
standby, the decoder will come out of standby and tune to
the required channel.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 23 of 60
THE STATUS BAR
Pressing YELLOW displays the Status Bar, whether viewing TV live, from the buffer or in playback. The
Status Bar is a helpful feature which indicates the current viewing position.
The Status Bar when viewing Live TV
When viewing Live TV, the timer at the end of the Status Bar indicates how far behind Live TV you are.
A timer of 00:10:00 indicates that you are viewing 10 minutes behind Live TV.
Green Bar
Blue Line
Yellow Bar
Transparent Bar
Timer
Red Line
Green Bar
…. Indicates what has already been viewed
Blue Line
…. Indicates current viewing position
Yellow Bar
…. Indicates what is still to be viewed
Red Line
…. Indicates the position of Live TV
Transparent Bar
…. Indicates available space in the buffer
Timer
…. Indicates time behind Live TV
HD PVR 2 P Viewer’s Guide (v1.2)
Page 24 of 60
The Status Bar when viewing a recording
When viewing a recording, the timer at the end of the Status Bar indicates the balance of the
recording. A timer of 01:00:00 indicates there is 1 hour to the end of the recording.
Green Bar
Blue Line
Yellow Bar
Green Bar
…. Indicates what has already been viewed
Blue Line
…. Indicates current viewing position
Yellow Bar
…. Indicates what is still to be viewed
Timer
…. Indicates time to end of recording
A blue triangle in the
Status Bar indicates a user
bookmark.
A grey triangle in the
Status Bar indicates a
system bookmark.
For more information on
bookmarks, see page 37.
HD PVR 2 P Viewer’s Guide (v1.2)
Timer
To quickly move through a
programme, press YELLOW to
display the Status Bar, then
move the Play/Pause button left
or right.
As you do this, the blue line in
the Status Bar moves, allowing
you to easily and quickly
“jump” within a programme.
Page 25 of 60
PVR ICONS
PVR ICONS : DISPLAYED ON PROGRAMME INFORMATION
These icons may appear next to programme titles in the i-Plate, TV Guide, Playlist or Scheduled
Recordings screens. They may also be displayed in extended information screens.
Scheduled Recording.
You are viewing a recording.
Recording in Progress.
This is Live TV.
Recurring Scheduled Recording.
This content is in the buffer, ie. you
are viewing behind Live TV.
You can set recurring Time Based
Recordings (see page 32).
Recurring Recording in Progress.
Alert Icon. This appears on the
Playlist or Scheduled Recordings
screens. To view more info on why
the alert icon is displayed, press i.
ONSCREEN PVR ICONS
These icons appear onscreen each time you change channel and when the i-Plate is displayed.
PVR Recording icon
Indicates a recording in progress, the channel details and the time
remaining.
PVR Recording Error icon
Indicates an error with a recording in progress (most likely loss of
signal). It may also indicate an error on tuner 2.
Note : recordings do not resume after an error.
PVR Pause Live TV icon
Indicates that Live TV is paused and time behind Live TV. The blue
line is where the programme was paused, the red line indicates Live
TV.
PVR Play icon
Indicates that you are viewing buffer content and time behind Live
TV. The green is what has been viewed and the yellow is what you
still have to view (to catch up to Live TV).
PVR Playback Fast Forward icon
Indicates fast forwarding of a recording. Different speeds are
indicated by the number of arrows.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 26 of 60
PVR HARD DISK USAGE
Hard disk space usage is indicated by icons in the Playlist, Scheduled Recordings and Reminders
screens.
This icon appears
onscreen when you have
less than 10% hard disk
space remaining.
HD PVR 2 P Viewer’s Guide (v1.2)
Remember to delete
recordings once you have
viewed them to ensure you
always have space for new
recordings.
Page 27 of 60
SETTING RECORDINGS AND THE SCHEDULED RECORDINGS SCREEN
HOW TO SET A RECORDING
There are five ways to set recordings :
Record what I’m watching (impulse recording).
Record a programme using the i-Plate.
Record a programme using a Channel Grid.
Record a programme using the TV Guide.
Record a specific time slot :
o
o
o
o
o
When you schedule a
recording, the HD PVR adds a
safety net (ie. 3 minutes to the
beginning and 10 minutes to the
end of the recording). For more
info on safety net settings, see
page 38.
• Record a specific time slot once
• Record a specific time slot on a recurring basis
➊
Record what I’m watching (impulse recording)
When viewing Live TV, press REC at any time to instantly start a recording of what you are viewing.
What Now?
o
The PVR Recording icon will appear onscreen, confirming
the start of the recording.
o
The recording will automatically stop at the end of the
programme.
o
The recording will be listed in the Playlist with an alert icon
(indicating a partial recording).
PVR Recording Icon
What else can I do?
o
You can extend the recording (see page 37).
o
You can stop the recording (see page 37).
What else could happen?
o
The PVR Recording Error icon (indicating a problem) may
appear (see page 26).
o
If the recording request conflicts with an existing recording,
a pop-up will indicate that the recording cannot be
scheduled.
o
If the maximum number of scheduled recordings has been
reached, a pop-up will indicate that the recording cannot be
scheduled. You will need to delete some scheduled
recordings first.
You cannot set an
impulse recording from the
buffer. The programme will
only record from when you
press REC, ie. it will be a
partial recording.
PVR Recording Error Icon
The PVR Recording Error
icon indicates a signal problem
on the channel being recorded.
It may also indicate an error
with the tuner being used for
the recording. (Tuner 2 is used for
recordings).
HD PVR 2 P Viewer’s Guide (v1.2)
Page 28 of 60
➋
Record a programme using the i-Plate
Press i (to display the i-Plate). Select a programme to record and press REC.
What Now?
o
The PVR Recording icon will appear onscreen, confirming
the start of the recording
o
If the programme has already started, a recording icon
will display next to the programme title.
o
If the programme has already started, the recording will
automatically stop at the end of the programme and will be
(indicating a partial
listed in the Playlist with an alert icon
recording).
o
PVR Recording Icon
If the programme has not yet started, a scheduled recording
icon
will display next to the programme title and the
programme will be listed in the Scheduled Recordings
screen.
What else can I do?
o
You can delete scheduled recordings (see page 34).
What else could happen?
o
If the programme has already started, the PVR Recording
Error icon (indicating a problem) may appear (see page 26).
o
If the recording request conflicts with an existing recording,
a pop-up will indicate that the recording cannot be
scheduled.
o
If the maximum number of scheduled recordings has been
reached, a pop-up will indicate that the recording cannot be
scheduled. You will need to delete some scheduled
recordings first.
HD PVR 2 P Viewer’s Guide (v1.2)
PVR Recording Error Icon
Page 29 of 60
➌
Record a programme using the Channel Grid
While viewing TV (either Live TV or in playback), press any of the arrow keys to display a Channel
Grid. Select the channel on which you would like to schedule a recording and press i (to display
the extended info). Select a programme to record and press REC.
What Now?
o
If the programme has already started, a recording icon
will display next to the programme title.
o
If the programme has already started, the recording will
automatically stop at the end of the programme and will be
(indicating a partial
listed in the Playlist with an alert icon
recording).
o
If the programme has not yet started, a scheduled recording
icon
will display next to the programme title and the
programme will be listed in the Scheduled Recordings
screen.
PVR Recording Icon
What else can I do?
o
You can delete scheduled recordings (see page 34).
What else could happen?
o
If the programme has already started, the PVR Recording
Error icon (indicating a problem) may appear (see page 26).
o
If the recording request conflicts with an existing recording,
a pop-up will indicate that the recording cannot be
scheduled.
o
If the maximum number of scheduled recordings has been
reached, a pop-up will indicate that the recording cannot be
scheduled. You will need to delete some scheduled
recordings first.
HD PVR 2 P Viewer’s Guide (v1.2)
PVR Recording Error Icon
Page 30 of 60
➍
Record a programme using the TV Guide
Press TV GUIDE. Then from either Favourite Channels or All Channels, select a programme to
record and press REC.
What Now?
o
If the programme has already started, a recording icon
title.
will display next to the programme
o
If the programme has already started, the recording will automatically stop at the end of the
(indicating a partial
programme and will be listed in the Playlist with an alert icon
recording).
o
If the programme has not yet started, a scheduled recording icon
will display next to the
programme title and the programme will be listed in the Scheduled Recordings screen.
What else can I do?
o
You can delete scheduled recordings (see page 34).
What else could happen?
o
If the recording request conflicts with an existing recording, a pop-up will indicate that the
recording cannot be scheduled.
o
If the maximum number of scheduled recordings has been reached, a pop-up will indicate
that the recording cannot be scheduled. You will need to delete some scheduled recordings
first.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 31 of 60
➎
Record a specific time slot (Time Based Recording)
This option allows you to record a specific channel for a set period of time. You can record a
channel for a specific time slot and set the frequency to once, daily, weekly or on weekdays.
o
o
To set-up a time based recording, press RED to go to the Playlist, then press the RIGHT
arrow to go to the Scheduled Recordings screen.
Press BLUE to go to the set-up screen for time based recordings.
Name
The name of this recording as it will appear in the Scheduled Recordings or Playlist
screens. To change the name, press the LEFT arrow to delete the name and use
the number keys on the remote control to type a new name.
Channel
Which channel do you want to record? The default is the channel currently tuned to.
Frequency
How often should this recording be scheduled? The default is “Once”.
Options are once, daily, weekly or on weekdays.
Start Date
On which date should this recording start? The default is today’s date.
Start Time
Enter the start time using the number keys on the remote control. The default is the
current time. Note : the time must be entered in the 24 hour format, 3pm = 15:00.
End Time
Enter the end time using the number keys on the remote control. The default is the
current time + 1 hour. Note : the time must be entered in the 24 hour format, 3pm =
15:00.
Lock / Unlock
Locking the scheduled recording ensures that nobody can delete your programme.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 32 of 60
What Now?
o
A single time based recording is listed in the Scheduled Recordings screen.
o
For recurring time based recordings, multiple incidents are listed in the Scheduled
Recordings screen.
What else can I do?
o
You can delete scheduled recordings (see page 34).
What else could happen?
o
If the recording request conflicts with an existing recording, a pop-up will indicate that the
recording cannot be scheduled.
o
If the time for the time based recording exceeds 12 hours, a pop-up will indicate that the
recording cannot be scheduled.
Safety net settings
to do not apply to time
based recordings. For
more info on safety net
settings, see page 38.
HD PVR 2 P Viewer’s Guide (v1.2)
Recurring time based
recordings will keep
recording indefinitely until
you cancel them.
Page 33 of 60
THE SCHEDULED RECORDINGS SCREEN
The Scheduled Recordings screen lists all scheduled recordings.
To go to the Scheduled Recordings screen, press RED to go to the Playlist followed by the RIGHT
arrow to go to Scheduled Recordings.
1
Header - Displays the screen name. If you press the RIGHT arrow, you go to the Reminders
screen and if you press the LEFT arrow, you go to the Playlist.
2
Hard disk usage indicator.
3
Indicates the number of pages of Scheduled Recordings. Press P+ to go to the next page and
P- to go to the previous page.
4
Titles of scheduled recordings.
5
PVR icons.
6
Day and date of scheduled recording.
7
Start time of scheduled recording. This time includes the safety net setting (see page 38).
8
Channel number & name.
9
Mini i-Plate.
10
Start and end time of the scheduled recording. This time includes the safety net setting (see
page 38).
11
Programme title.
12
Synopsis (press i for more info).
13
PG Rating.
14
PG Lock and PG Block icons. A blue key indicates a locked programme. A black key indicates
this programme is blocked due to the PG Rating.
15
Colour buttons :
RED = delete a scheduled recording. (If you have a recurring recording, you will need to select
to delete one or all).
BLUE = set up a time based recording (see page 32).
WHITE = sort scheduled recordings according to date or alphabetically.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 34 of 60
VIEWING YOUR RECORDINGS
THE PLAYLIST
The Playlist is where you find all the programmes you have recorded. You get to choose what you want
to watch, when you want to watch it! Press RED to go to the Playlist.
To ensure you always have space for new recordings, remember to delete recordings you have already
viewed and no longer want to keep.
1
Header - Displays the screen name. If you press the RIGHT arrow, you go to Scheduled
Recordings and if you press the LEFT arrow, you go to Reminders.
2
Hard disk usage indicator.
3
Indicates the number of pages in the Playlist. Press P+ to go to the next page and P- to go to
the previous page.
4
Titles of recordings.
5
PVR icons.
6
Recording date.
7
Duration of recording.
8
Channel number and name.
9
Mini i-Plate.
10
Duration of recording.
11
Programme title.
12
Synopsis (press i for more info).
13
PG Rating.
14
PG Lock and PG Block icons. A blue key indicates a locked programme. A black key indicates
this programme is blocked due to the PG Rating.
15
Colour buttons :
RED = delete a recording.
WHITE = Options. You can rename, lock or sort the recordings in the Playlist.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 35 of 60
Selecting a recording to view
Press RED to go to the Playlist and select a programme to view. Press OK to start.
What Now?
o
The programme will start playing (you are now viewing in playback mode).
o
The i-Plate will be aqua blue. This indicates you are viewing a recording.
What else can I do?
o
You can pause, fast forward or rewind the programme. You can also view in slow motion (see
pages 37 - 39).
o
You can set a bookmark (see page 37).
o
You can press STOP to stop playback and return to the Playlist.
What else could happen?
o
If the recording has been partially viewed, a pop-up displays with options to resume from
where you left off or to start from the beginning.
o
If the recording is PG blocked, you first need to enter the correct PG PIN code.
Why is there often more than one
programme listed on the Playback i-Plate, when I
only recorded one programme?
The programme you recorded is usually second
on the list. The PVR inserts a safety net at the
beginning and end of each scheduled recording to
ensure as much as possible that variances in
actual broadcast times do not impact recordings.
For more info on the safety net, see page 38.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 36 of 60
OTHER FEATURES
EXTENDING A RECORDING IN PROGRESS
You can extend the recording time of a recording in progress.
o
o
o
Select the programme being recorded in the i-Plate, TV Guide, Playlist or Scheduled Recordings
screen.
Press i (to display the extended information), then press BLUE to extend the recording. You can
select to extend the recording time by up to 60 minutes.
If the recording extension cannot be accommodated due to conflict with other existing scheduled
recordings, an error message will be displayed.
STOPPING A RECORDING IN PROGRESS
You can stop any recording in progress.
o
o
Press STOP.
An onscreen banner is displayed. Press OK to stop the recording.
o
The recording will be listed in the Playlist with an alert icon
(indicating a partial recording).
BOOKMARKS
A bookmark marks a selected place in a recorded programme and allows you to easily find your
favourite moments and watch them again.
Example : While viewing a recording of your favourite rugby match, you could set a bookmark for each
try of the match and later, watch them all again, one after another.
A blue triangle in the Status Bar indicates a user bookmark, ie. bookmarks set by the viewer.
A grey triangle in the Status Bar indicates a system bookmark (programme changes).
Setting and using bookmarks
o
o
o
o
When viewing a recording, press BLUE to set a bookmark.
The Status Bar is displayed and a BLUE triangle inserted to indicate the bookmark.
To view bookmarks, press YELLOW to display the Status Bar.
Then use the LEFT and RIGHT arrows to jump to the bookmark(s).
Deleting bookmarks
o
o
To view bookmarks, press YELLOW to display the Status Bar.
Then use the LEFT or RIGHT arrows to jump to the bookmark you want to delete and press BLUE.
The BLUE triangle which indicated the bookmark is deleted.
Note : System bookmarks cannot be deleted
SLOW MOTION
You are able to view programmes in slow motion.
o
o
o
Press WHITE to view the action in slow motion.
Press WHITE again to view at an even slower pace.
Press WHITE a third time to resume viewing at the normal speed.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 37 of 60
THE SAFETY NET
When you schedule a recording, the HD PVR automatically adds 3 minutes to the beginning and 10
minutes to the end of the recording (so long as the safety net does not clash with other existing
recordings). To change the default settings for the safety net, see page 48.
The new settings will only take effect on new scheduled recordings, ie. existing scheduled recordings
retain their original safety net settings.
Note : Safety Nets are not applied to Time Based Recordings.
The PVR will eliminate the safety net to
avoid conflict.
Example : you set a recording from 10:00-11:00
(09:57-11:10 with default safety net).
If you want to schedule a recording for 11:00 –
12:00, the PVR drops the safety net on the 10:00
recording to ensure that this new recording can
be accommodated.
FAST FORWARDING
There are three ways to fast forward :
➊
Using the Play/Pause button (Method 1)
o
➋
Using the Play/Pause button (Method 2)
o
o
o
o
➌
Move and hold the Play/Pause button to the right and when you reach the correct point,
release the Play/Pause button.
Press the Play/Pause button to pause the programme. Now nudge the Play/Pause button
once to the right. The onscreen icon indicates the fast forward speed with two arrows in
the PVR Play icon.
To increase the fast forward speed, nudge the Play/Pause button to the right once more.
To fast forward at the maximum speed, nudge the Play/Pause button to the right once
more.
To stop fast forwarding, press the Play/Pause button again (to pause) and then again (to
resume).
Using the Status Bar
o
o
Press YELLOW to display the Status Bar.
Move the Play/Pause button to the right (to move the blue line in the Status Bar). When
you reach the correct point, release the Play/Pause button.
REWINDING
HD PVR 2 P Viewer’s Guide (v1.2)
Page 38 of 60
There are three ways to rewind :
➊
Using the Play/Pause button (Method 1)
o
➋
Using the Play/Pause button (Method 2)
o
o
o
o
➌
Move and hold the Play/Pause button to the left and when you reach the correct point,
release the Play/Pause button.
Press the Play/Pause button to pause the programme. Now nudge the Play/Pause button
once to the left. The onscreen icon indicates the rewind speed with two arrows in the PVR
Play icon.
To increase the rewind speed, nudge the Play/Pause button to the left once more.
To rewind at the maximum speed, nudge the Play/Pause button to the left once more.
To stop rewinding, press the Play/Pause button again (to pause) and then again (to
resume).
Using the Status Bar
o
o
Press YELLOW to display the Status Bar.
Move the Play/Pause button to the left (to move the blue line in the Status Bar). When you
reach the correct point, release the Play/Pause button.
When in Live TV or Playback, the
option of “instant replay” is also
available.
Press the Play/Pause button once to
the left and the programme rewinds
10 seconds.
THE DECODER MENU
HD PVR 2 P Viewer’s Guide (v1.2)
Page 39 of 60
The Decoder Menu is your access point for all the settings that control the HD PVR. To access the
Decoder Menu, press MENU.
The Decoder Menu has 4 sections :
Information Central
Quick access to status and information for the decoder hardware and
software.
Parental Control
Options that allow you to control the viewing in your home.
Personalise
Options to personalise decoder defaults to suit your viewing.
Advanced Options
The technical section which includes network and configuration set-up,
ability to download the latest software and XtraView settings.
Always look at the bottom of the
screen for detailed onscreen
instructions on how to navigate the
screen, how to edit options, how to
save your settings and more.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 40 of 60
THE DECODER MENU – INFORMATION CENTRAL (#1)
The information screens in the Decoder Menu provide technical information about your HD PVR. This
information will be relevant should you need to contact the MultiChoice Call Centre.
INFORMATION CENTRAL MENU
INFORMATION CENTRAL
This screen shows high level information.
The number at the end of line 6 is important
when contacting the MultiChoice Call Centre
as this is the smartcard number.
To access Hotlinks, press i on Information Central.
Warning!
If you select option 7 (Reset all Factory Settings), all
Scheduled Recordings and Reminders will be deleted.
The signal strength and quality are for the
channel currently tuned to.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 41 of 60
HARDWARE STATUS
Information on the DSD, CA, Loader and HGPC Status.
The two numbers you need to know when
checking if you have the latest software are :
DSD Status screen
• The value on the 6th line, Appl SW.
Loader Status screen
• The value on the 3rd line, after Load Ver/Var
The MultiChoice Call Centre has the latest
software details and will be able to advise if your
HD PVR has the latest software.
For easy reference, the latest software values are
also available on our website (www.dstv.com).
HD PVR 2 P Viewer’s Guide (v1.2)
Page 42 of 60
TUNER STATUS
Information on the status of the 2 tuners. The information displayed is dependent on the current activity
of the decoder.
o
Tuner 1 – used for normal viewing
o
Tuner 2 – used for recording, EPG data and control messages
SIGNAL STATUS
Information on the status of the 2 tuners. The information displayed is dependent on the current activity
of the decoder.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 43 of 60
THE DECODER MENU – PARENTAL CONTROL (#2)
The HD PVR has a Parental Control feature to control viewing in your home. Access to this feature is
controlled by the PG PIN code.
The default PG PIN code is 1234.
The PG PIN code is blocked if entered
incorrectly multiple times.
If this happens, you need to contact
your nearest MultiChoice Call Centre
to have the PG PIN reset.
➊ GLOBAL BLOCKING
Global Blocking Options :
o No Block : all programmes are cleared for
viewing. Parental levels do not apply.
o Total Block : all programmes are blocked and can
only be viewed with the valid PG PIN code.
o Personalise : select what you want to block
based on PG settings.
Note : If you select “Personalise”, you must also select a
Parental Guidance Setting (#2).
➋ PARENTAL GUIDANCE SETTINGS
If you select “Personalise” for Global Blocking, you
must select a Parental Guidance Setting.
o None : all programmes are cleared for viewing.
o FAM : FAM rated programmes are cleared for
viewing. All others are blocked.
o PG 13 : FAM and PG13 rated programmes are
cleared for viewing. All others are blocked.
o 16 : FAM, PG13 and 16 rated programmes are
cleared for viewing. All others are blocked.
o 18 : FAM, PG13, 16 and 18 rated programmes are
cleared for viewing. All others are blocked.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 44 of 60
➌ CHANNEL BLOCKING
This option differs from Global Blocking as it
allows you to block an entire channel. The
channel can only be viewed on entering the
valid PG PIN code.
o Select the channels you would like to block and
press WHITE to block them.
Press WHITE to edit.
o Press OK to confirm your selection.
o Once a channel is blocked, press WHITE to
unblock it or press RED to unblock all
channels.
CHANGING THE PG PIN CODE
Changing the PG PIN Code :
o Press BLUE (from the Parental Control Menu).
o Enter the new PG PIN code twice (the PG PIN
code can be any 4 digits).
o Press OK to confirm the new PG PIN code.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 45 of 60
THE DECODER MENU – PERSONALISE (#3)
This menu allows you to personalise certain settings on the HD PVR.
The default settings are :
1.
Aspect Ratio = 16:9
2.
Language Options = English – Family
3.
Surround Sound = Manual
4.
Safety Net Settings = 3 min / 10 min
5.
Display Timeout = 10 seconds
6.
Transparency = Transparent
7.
Automatic Standby = Never
➊ ASPECT RATIO
o Press WHITE to edit the options
o Press OK to confirm selection
HD PVR 2 P Viewer’s Guide (v1.2)
Page 46 of 60
➋ LANGUAGE OPTIONS
This option allows you to specify 2 language preferences for the audio soundtracks available on certain
channels and programmes.
o Press WHITE to edit the options
o Press OK to confirm selection
The default language
is your first preference.
If neither of your selected
language options is
available, the channel’s
first option will be
presented.
You can change the
actual soundtrack when
viewing TV or a
recording, by pressing
LANGUAGE and selecting
from the available
options.
➌ SURROUND SOUND
There are two options :
o
Manual : if surround sound is available when viewing Live TV, you need to activate it by pressing
LANGUAGE and selecting Surround Sound on the Language / Soundtrack pop-up.
o
Auto : if surround sound is available, it will automatically be detected and used when available.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 47 of 60
➍ SAFETY NET SETTINGS
When you schedule a recording, the HD PVR automatically adds 3 minutes to the beginning and 10
minutes to the end of the recording (so long as the safety net doesn’t clash with other existing
recordings).
o Press WHITE to edit the options
o Press OK to confirm selection
The new settings will only take effect on new
scheduled recordings, ie. existing scheduled
recordings retain their original safety net settings.
The PVR will eliminate the safety net to
avoid conflict.
Example : you set a recording from 10:00-11:00
(09:57-11:10 with default safety net).
If you want to schedule a recording for 11:00 –
12:00, the PVR drops the safety net on the 10:00
recording to ensure that this new recording can
be accommodated.
➎ DISPLAY TIMEOUT
This option allows you to customise the display period for the i-Plate and onscreen PVR icons. You can
set it for anywhere between 1 and 20 seconds.
➏ TRANSPARENCY
This option allows you to choose between a transparent and opaque (solid) display of the i-Plate and
Channel Grid.
➐ AUTOMATIC STANDBY
To extend the lifespan of the HD PVR, you have the option to disable the hard disk during periods when
the decoder is not in use. When the HD PVR is in standby, the hard disk goes to “sleep”. Recordings
scheduled for when the HD PVR is in standby are not impacted and will take place.
If you change the default setting and select a time period, the HD PVR will automatically go into standby
after the selected period of inactivity.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 48 of 60
THE DECODER MENU – ADVANCED OPTIONS (#4)
Access to the Advanced Options requires the installation PIN (9949).
➊ NETWORK SET-UP
The default settings are :
1
Satellite
1.
Satellite = DStv IS7
2.
LNB Power = Controlled
3.
LNB Mode = Univ
4.
LNB Lo Frequency = 9750
5.
LNB Hi Frequency = 10700
6.
Network Frequency = 11594
7.
Symbol Rate = 27500
8.
FEC = 5/6
9.
Polarisation = Vertical
Options : DStv IS7, DStv IS10, DStv W4, Other.
As you scroll these options, the values for options 2 – 9 change and are
sometime greyed out (indicating that the option is not selectable).
Customers in SA should select DStv IS7.
Customers with a SatCR installation - select Other, then change
#3 (LNB Mode) to SatCR.
2
LNB Power
3
LNB Mode
Options : Univ, Std, SatCR.
4
LNB Lo Frequency
Options : Any number in the range of 0 - 9999
5
LNB Hi Frequency
Options : Any number in the range of 0 – 9999
This frequency must always be higher than the low frequency.
6
Network Frequency
Options : Any number in the range of 0 - 9999
7
Symbol Rate
27500
8
FEC
Options : 1/2, 2/3, 3/4, 5/6, 7/8.
9
Polarisation
Options : Vertical, Horizontal.
HD PVR 2 P Viewer’s Guide (v1.2)
Options : 13v, 18v, Controlled, Off.
Page 49 of 60
➋ EQUIPMENT SET-UP
The default settings are :
1.
TV Type = PAL I
2.
High Definition Output = Original
3.
TV Link = Disabled
4.
UHF Tuning = 63
5.
Lip-sync Delay = 0
6.
Audio Output = Variable
7.
Local Time = Local Time
1
TV Type
Options : PAL I, PAL BG.
2
High Definition
Output (HDMI)
Options : Original, Native, 576i (PAL), 576p, 720p, 1080i.
If you select Original, the HD PVR will automatically select the resolution of
the display to match the resolution of the broadcast. So, if the broadcast is in
576i and the TV supports 576i, the HD PVR will use 576i (otherwise it will use
the default resolution). If the broadcast is 720p and the TV supports 720p, the
PVR will use 720p (otherwise it will use the default resolution).
If you select Native, the TV sends the HD PVR a list of supported resolutions
and the HD PVR will use the “best” resolution (respective to TV) for all
broadcasts.
NOTE : In the case where the TV does not indicate its native resolution, the PVR
will use the highest supported resolution.
For all other settings : The HD PVR will send all broadcasts in this fixed
resolution to the TV, and this resolution only.
3
TV Link
4
UHF Tuning
5
Lip-sync Delay
The TV Link is disabled unless the XtraView Communication Port and
Remote Mode have been selected in the XtraView Set-up Screen.
Use the number buttons on the remote control to enter a value.
Audio / video sync problems are mainly caused when the audio goes to a
home theatre system and the video goes directly to the TV. This is because
the time it takes the TV to process the video, and the time it takes the home
theatre to process the audio, may differ.
The lip-sync issue can be corrected by adjusting the lip-sync setting.
6
Audio Output
Options : Variable, Fixed.
Variable audio output allows you to adjust the volume while viewing whereas
fixed only allows the volume to be muted. Fixed volume is recommended if
content is being recorded to an external device such as a video or DVD, as it
assures that the recorded volume is consistent.
7
Local Time
HD PVR 2 P Viewer’s Guide (v1.2)
If the time displayed on the front panel of the HD PVR or on the i-Plate does
not correspond with the actual time, change this setting to the local time.
Page 50 of 60
➌ XTRAVIEW SET-UP
The default settings are :
1.
Communication Port = RF Out
2.
Remote mode = TV1
3.
Relay Remote Commands = Off
4.
Accept Relayed Commands = Off
If the HD PVR is being
linked to another XtraView
decoder, visit www.dstv.com
for full XtraView info (including
detailed installation options and
a guide to installation prices).
➍ PVR CLEAN-UP
This option allows you to delete the Playlist, PVR Schedule (Scheduled Recordings & Reminders) or All
of these.
On selecting the required option, a confirmation
pop-up is displayed. Once you have pressed OK to
start the clean-up, a progress bar is displayed.
DO NOT interrupt the process.
.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 51 of 60
➎ DSD UPGRADE
This option allows you to upgrade the decoder software and also allows you to set a time for automatic
decoder upgrades.
At the time you specify in this option, the decoder
will automatically check for software, and if
available, initiate a download.
If the RED button is displayed and you initiate a
download, DO NOT interrupt the process and wait
for full video and audio to resume.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 52 of 60
FACTORY DEFAULTS
Network Defaults
Satellite
DStv IS7
LNB Power
Controlled
LNB Mode
Universal
LNB Lo Frequency
9750
LNB Hi Frequency
10700
Network Frequency
11594
Symbol Rate
27500
FEC
5/6
Polarisation
Vertical
Equipment Defaults
TV Type
PAL I
High Definition Output
Original
TV Link
Disabled
UHF Tuning
63
Lip-sync Delay
0
Audio Output
Variable
XtraView Defaults
Communication Port
RF Out
Remote mode
TV1
Relay Remote Commands
Off
Accept Relayed Commands
Off
PIN Defaults
PG PIN code
1234
Advanced Options PIN code
9949
Scheduled Recordings Edit and Lock PIN code
1234 (same as PG PIN code)
HD PVR 2 P Viewer’s Guide (v1.2)
Page 53 of 60
SPECIFICATIONS
Memory
DDRAM
256 MByte
FLASH
4MBytes NOR FLASH
128MBytes NAND FLASH
Non-volatile Memory
Emulated in FLASH
Core Architecture
Processor Performance
2x475 Dhrystone 2.1 MIPS
Front End
Type
Satellite
Modulation
QPSK / 8PSK
Input Frequency
950 to 2150MHz
Symbol Rate (DVB-S / DVB-S2)
DVB-S : 20Msym/s to 30Msym/s
DVB-S2 : 10Msym/s to 30Msym/s
Remodulator
Output
Frequency CCIR Channel 21 to 69 (software selectable)
Video
Format PAL I or PAL G (software selectable)
Video and Audio
Audio Decompression
Dolby Digital (AC 3)
MPEG-1 L1 & L2
Video Decompression
MPEG-4 HE AAC
MPEG-1 L3 (MP3)
MPEG-4 HE AAC+
Line Output
PAL I / PAL B / 625
MPEG Profiles & Levels
MPEG-2 MP@HL profile
MPEG-4 Part 10 MP@L3 720 x 576 25 Hz or 720 X 480
30 Hz
MPEG-4 Part 10 MP@L4 720 x 576 25 Hz or 720 X 480
30 Hz
MPEG-4 Part 10 MP@L4 1920 x 1080i at 60 Hz or 50 Hz
profile
HD PVR 2 P Viewer’s Guide (v1.2)
Page 54 of 60
Rear Panel Connectors
2 Satellite inputs including SatCR
Female F-Type
Remodulator RF in and RF out
Female F-Type, includes XtraView capability
Baseband Video
RCA, Yellow
Stereo Audio
2 x RCA, Red / White – Fixed or Variable Volume
(software selectable)
DC Power Cable Connector
DC input power jack
Digital Audio (electrical)
RCA, Orange
Digital Audio (Optical)
TOSlink, Orange
General
Front Panel Buttons
9
Front Panel LEDs
4
LED Display
Seven segment
RCU receiver
1
Front Panel USB
Type-A
Smartcard reader
1
HD PVR Viewer’s Guide
HD PVR 2 P version 1.2 (Feb 2010) e&oe
For the latest version of
the HD PVR Viewer’s Guide, go
to www.dstv.com
HD PVR 2 P Viewer’s Guide (v1.2)
Page 55 of 60
LEGAL M ATTERS
Important notice to all purchasers of a DStv HD PVR Decoder.
INTRODUCTION
This DStv HD PVR 2 P Decoder is designed, manufactured and sold to receive MultiChoice services
only. It will therefore not be fully functional unless it is used with an enabled MultiChoice Smartcard and
the external power supply (supplied with the DStv HD PVR 2 P Decoder), deployed within the
MultiChoice southern African broadcast footprint, and installed so as to receive the MultiChoice signal.
MultiChoice is entitled to amend the software incorporated in the DStv HD PVR 2 P Decoder from time
to time by means of software downloads for a number of reasons, including preventing the DStv HD
PVR 2 P Decoder from being used to receive services other than MultiChoice services.
DIY INSTALLATIONS DISCLAIMER
Due to the many potential configurations in each home and the variety of equipment available, it is not
possible to cover every potential installation scenario in this Viewer’s Guide. A MultiChoice Accredited
Installer or the supplier / manufacturer of the specific equipment should be consulted if any doubt exists
when doing an installation.
INSTALLATIONS INDEMNITY
Installation procedures for satellite dishes are outside the scope of this manual. Please refer to the
manuals provided with your satellite dish and associated equipment if you decide to do the installation
yourself. For the DStv HD PVR 2 P Decoder to operate, it is required to correctly install and align a
satellite dish and a Low Noise Block (LNB) converter.
Each and every installer acts as an independent contractor and is not an employee, subcontractor or
agent of the manufacturer or MultiChoice. The manufacturer and MultiChoice are therefore not liable for
any loss or damage of any nature whatsoever caused by the conduct of the installer, including, but not
limited to :
o
Any direct, indirect or consequential damages of any nature or any loss of profit or other special
damages of any nature which the user may suffer as a result of any breach by the installer of any
of its obligations to the user.
o
Any loss or damage to the property of the user or any third party, situated on the user’s premises,
as a result of an act or omission on the part of the installer.
The manufacturer and MultiChoice do not directly or indirectly warrant or guarantee or make any
representations whatsoever with regards to any equipment, including, but not limited to, any dish, LNB,
or cabling used by the installer.
Subject to any express warranty or guarantee given by the manufacturer or MultiChoice, in writing, the
manufacturer and MultiChoice do not :
o
Give any warranty or guarantee or make any representation whatsoever in respect of any work
carried out by the installer.
o
Accept any liability for any latent or other defect in any work carried out by the installer.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 56 of 60
MACROVISION
This product incorporates copyright protection technology that is protected by U. S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorised by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorised by Macrovision. Reverse engineering or disassembly is prohibited.
PACE
Pace and
are trade marks and/or registered trade marks of Pace plc.
DOLBY
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
INTELLECTUAL PROPERTY
The whole of the HD PVR 2 P Viewer’s Guide, including the graphics, menus and information contained
herein are the subject of intellectual property rights, including copyright, under domestic law and
international conventions. All rights are reserved.
All intellectual property rights in the DStv HD PVR 2 P Decoder as well as in the content received using
this DStv HD PVR 2 P Decoder are owned by or licensed by MultiChoice. The subscriber shall acquire
no right, title or interest in the intellectual property.
No data, video or audio content received using this DStv HD PVR 2 P Decoder and a MultiChoice
conditional access Smartcard may be copied, re-transmitted, re-broadcast other than as permitted by
MultiChoice in the Subscriber Agreement. Hiring out or selling any of the content received using this
DStv HD PVR 2 P Decoder is STRICTLY PROHIBITED.
Hacking of the conditional access system, accessing the hard disk of any decoder or facilitating anyone
else doing so is STRICTLY PROHIBITED. Failure to adhere to this prohibition is a criminal offence.
GENERAL
MultiChoice reserves the right to “marry” the Smartcard and the decoder.
Access to the hard disk of the DStv HD PVR 2 P Decoder shall terminate on termination of PVR
subscription.
MultiChoice shall be entitled to reserve a portion of the hard disk for use by MultiChoice.
MultiChoice shall not be liable for failure of Smartcard or decoder or any component thereof.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 57 of 60
PRODUCT WARRANTY
The manufacturer and MultiChoice warrant that the DStv HD PVR 2 P Decoder will be free from defects
in design, materials and workmanship for a period of 12 months from the date of sale of the new DStv
HD PVR 2 P Decoder to the consumer. This warranty will not apply in the event of :
o
the DStv HD PVR 2 P Decoder being tampered with or being opened, worked on, repaired or
modified, save by an authorised MultiChoice Agent or Branch;
o
the DStv HD PVR 2 P Decoder not being installed or used in accordance with the manufacturer’s
specifications;
o
the DStv HD PVR 2 P Decoder not being used with the supplied power supply;
o
malfunctioning or damage caused by the use of the DStv HD PVR 2 P Decoder in conjunction
with equipment or smartcards not supplied by the manufacturer or MultiChoice;
o
the DStv HD PVR 2 P Decoder being used to receive services other than MultiChoice services.
In the event of the DStv HD PVR 2 P Decoder not functioning within the first 60 days of purchase,
contact the MultiChoice Call Centre or take the DStv HD PVR 2 P Decoder to a MultiChoice Branch /
Agent, or the retailer from which the DStv HD PVR 2 P Decoder was purchased.
Thereafter a MultiChoice Branch or Agent will return the DStv HD PVR 2 P Decoder to the MultiChoice
Repair Centre. The manufacturer or MultiChoice, at their sole discretion, will repair or replace the DStv
HD PVR 2 P Decoder which is not functioning and which is taken to a MultiChoice Agent or Branch
within 12 months from the date of sale of the new DStv HD PVR 2 P Decoder to the consumer.
Any repairs made in these first 12 months must be made by the MultiChoice Repair Centre in order to
rely on this warranty certificate. This certificate, plus the original purchase receipt showing the date of
purchase of the new DStv HD PVR 2 P Decoder, must be provided to the MultiChoice Agent or Branch
to whom the DStv HD PVR 2 P Decoder is taken.
DISCLAIMER
Other than set out in the most up-to-date HD PVR Viewer’s Guide (available at www.dstv.com), the
manufacturer and MultiChoice make no warranties, either expressed or implied, and including, but not
limited to, implied warranties of merchant ability and fitness of the DStv HD PVR 2 P Decoder for a
particular purpose. This extends to the hardware, software, the HD PVR Viewer’s Guide and any other
written materials accompanying the DStv HD PVR 2 P Decoder at the time of its sale.
The manufacturer and MultiChoice specifically make no warranties, expressed or implied, that the DStv
HD PVR 2 P Decoder is capable, or in the future, will be capable, of receiving services other than
MultiChoice services.
Despite anything to the contrary, and save for the above-mentioned remedy in relation to the DStv HD
PVR 2 P Decoder which does not function during the period covered by this warranty certificate, the
manufacturer and MultiChoice will bear no liability whatsoever, whether in contracts, delict or otherwise,
for injury, loss or damage, including any loss of business profits or any other consequential damages
arising out of the installation, use or operation of the DStv HD PVR 2 P Decoder or any defect therein.
MultiChoice shall not be liable for loss of memory or recorded material for any reason whatsoever
including the loss of memory or recorded material as a result of termination of access rights.
MultiChoice will not be held responsible for any damage resulting from installations, whether by its
agents, MultiChoice Accredited Installers, through do-it-yourself or through incorrect usage of
equipment.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 58 of 60
OBSOLESCENCE DISCLAIMER
Digital Satellite Technology is rapidly evolving. As a result of this, it is not possible to predict what the
requirements will be in a few years’ time. MultiChoice cannot guarantee that this DStv HD PVR 2 P
Decoder will be able to run all available services in future.
FOR YOUR RECORDS
We recommend you complete the following information for your records :
Product Model
HD PVR 2 P
Serial Number
Purchaser’s Name
Purchaser’s Address
Authorised Dealer’s Name
Dealer’s Address
Date of Purchase
Did you know you can insure your HD
PVR 2 P Decoder?
Visit www.dstv.com for more information on
the Decoder Care Contract which covers the
HD PVR 2 P in the event of loss or damage.
Terms & Conditions apply.
HD PVR 2 P Viewer’s Guide (v1.2)
Page 59 of 60
TROUBLESHOOTING / HOTLINES
CALL CENTRES
MultiChoice South Africa
Johannesburg
Durban
Cape Town
Bloemfontein
Port Elizabeth
Pretoria
(011) 289 2222
(031) 710 2222
(021) 508 2222
(051) 503 2222
(041) 395 2222
(012) 422 2222
MultiChoice Africa (Sub-Sahara)
Sub-Sahara
Botswana
Malawi
Moçambique
Namibia
Swaziland
Zambia
Zimbabwe
+27 11 289 2266
+267 360 5666
+26 621666 / 633454 / 623505
+258 1 303605 / 303610
+264 61 270 5222
+268 404 1786 / 1226 / 8062
+260 1 261616 / 262184
+263 4 25 3325
E-MAIL ENQUIRIES
South Africa
Outside South Africa
[email protected]
[email protected]
WEBSITES
DStv
MultiChoice (South Africa)
MultiChoice Africa (Sub-Sahara)
Manufacturer (Pace)
www.dstv.com
www.multichoice.co.za
www.dstvafrica.com
www.pace.com
If you have comments,
suggestions or want to chat to
other HD PVR customers about
the product, visit the DStv
Forums at www.dstv.com
HD PVR 2 P Viewer’s Guide (v1.2)
Page 60 of 60