East End - MP Collections

Transcription

Price List
September 2009
Sofas
Low Tables
Bookshelves
Small Armchairs
Work Seats
Desks, Tables and Cabinets
Doors
Accessories
Covers
OFFICE COLLECTION
UPDATING 09.2012
INCLUDING PRICE LIST NOVELTIES
AND INCREASES
Price List
September 2009
General terms and conditions of sale
1 - DEFINITIONS
1.1 “Customer”: the signer of the purchase order sent to Matteograssi S.p.A.
1.2“Products”: all the goods marketed by Matteograssi S.p.A. forming the
subject-matter of the purchase order sent by the Customer.
1.3 “Contracts”: all the current and future sale contracts between Matteograssi
S.p.A. and the Customer due to the acceptance, by issuing the order
confirmation or by starting to perform, the purchase order sent by the
Customer to Matteograssi S.p.a.
2 -PURPOSE
2.1 The General terms and conditions herein, subject to any exceptions
explicitly approved in writing by Matteograssi S.p.A. and by the Customer
(hereinafter also referred to jointly as “Parties” or individually as “Party”),
govern all the current and future Contracts of which they are integral part.
2.2 The General terms and conditions herein replace any other General
terms and conditions previously undersigned by the Parties.
2.3 Any general terms and conditions of purchase of the Customer are not
applied to the Contracts unless expressly approved in writing by the Parties.
3 - PURCHASE ORDERS AND THEIR ACCEPTANCE
Each purchase order sent to Matteograssi S.p.A. will have to be undersigned
by the Customer or by its representative. Matteograssi S.p.A. reserves the
unquestionable right to accept or not each purchase order received from
the Customer through order confirmation in writing or by executing it.
4 - PRICES
4.1 Unless otherwise agreed in writing between the Parties, the prices of
the Products are those indicated in this price list, that cancels and replaces
the previous agreements and is the only reference for the Customer for
formalising the order. Matteograssi S.p.A. reserves the right to change the
said price list at any moment and without prior notice.
4.2 The prices indicated in the price list do not include the costs relevant
to any assembly and installation of the Products in the purchaser’s premises.
In the events mentioned in articles 5.3 and 5.4, transport expenses will
have to be added to the prices indicated in the price list according to the
terms therein provided.
4.3 Matteograssi S.p.A., in order to maintain and improve the quality of its
own Products, reserves the right to make changes at any moment to the
materials, finishing and elements forming the Products, without damaging
the aesthetic and functional aspect.
5 - DELIVERY TERMS AND METHODS
5.1 The delivery terms of the Products notified to the Customer when
accepting the purchase order are a non-essential indication of the shipment
week of the goods from the factory and entrusting to the forwarding agent;
therefore, if these terms expire and the Products are not fully or partially
delivered, Matteograssi S.p.A. shall not be liable for any damages suffered
by the Customer due to the delay. In case of failure to deliver the Products
after 60 (sixty) days from the delivery date approximately indicated to the
Customer when the order is accepted, the Customer shall be entitled
to withdraw from the contract, except for a cause not attributable to
Matteograssi S.p.A. and without prejudice, in any case, to the absence of
any other responsibility with reference to the latter.
5.2 The delivery of the Products occurs with ex reseller clause for the
following countries: Italy, Austria, France, Germany, Spain (excluding the
islands), Belgium, Netherlands, Luxembourg and Switzerland.
5.3 For the following countries: United Kingdom, Ireland, Portugal, Spanish
islands, Sweden, Finland, Norway, Denmark, a 3% contribution for travel
expenses is requested on the list price, which shall be applied in the invoice.
5.4 For all the other destinations, the Products are delivered ex factory.
6 - PRODUCT TRANSPORT
In the events mentioned in articles 5.2. and 5.3 Products travel with reliable
forwarding agents of Matteograssi S.p.A. The Customer, when delivering the
Products, must immediately make sure that they are complete and that their
quantities and type correspond to those indicated in the purchase order
accepted by Matteograssi S.p.A. Any lack of completeness or any difference
from the purchase order must be indicated, affixing the relevant reserve, on
the delivery document T.D.D. or on the carriage note, countersigned for
approval by the forwarding agent. These documents must be immediately
sent to Matteograssi S.p.A.
7 - CONDITIONAL SALE
7.1 Pursuant to articles 1523 and following of the Civil Code and also when
an instalment payment of the price has not been agreed upon, Matteograssi
S.p.A. sells its own Products with conditional sale until the full payment of
the price by the Customer.
7.2 If an instalment payment of the price has been agreed upon, the
failure to pay even one instalment whose amount is equal to or greater
than the eighth part of the overall price due, will imply the Customer’s loss
of the benefit of the term with regard to the following instalments and
Matteograssi S.p.A. will be able to obtain the cancellation of the contract.
In this last case, any amount already paid by the Customer will be withheld
by Matteograssi S.p.A. by way of indemnity, except for the reparability of
the subsequent damage.
8 - PAYMENT TERMS AND METHODS
8.1 The terms of payment will be agreed upon by the Parties in the
purchase order.
8.2 Il The failure to pay or delayed or incomplete payment even of only one
invoice authorises Matteograssi S.p.A. not to carry out the other purchase
orders received from the Customer and already accepted, as well as to
request compensation for any suffered damage.
8.3 In case of failure to pay or delayed or incomplete payment, the Customer
will be obliged to pay, for each outstanding invoice, the interests provided
by Legislative Decree no. 231 of October 9th, 2002.
9 - RETURNS
Any Product returns will have to be previously authorised by Matteograssi
S.p.A. at its own exclusive discretion and upon the Customer’s specific
request. The transport of the Products for which Matteograssi S.p.A. authorises the return is carried out by Matteograssi S.p.A. itself, or by its own
reliable forwarding agent. The Customer is obliged to package properly the
Products to be returned before delivering them to the forwarder, under
penalty of being charged the damages that may occur owing to transport.
10 - NOTIFICATIONS
Each notification and/or declaration of the Customer intended for Matteograssi S.p.a concerning the Contracts or their performance will have to be
sent to the following address: Via Padre Rovagnati n. 2 - 22066 Mariano
Comense (CO) – Italy.
11 - CONFIDENTIALITY AGREEMENT
The Parties mutually undertake not to use or disclose to third parties the
secrets of businesses or activities of the other Party with which they may
become acquainted when performing the Contract, except for those that
are already normally disclosed.
12 - AMENDMENTS AND ADDITIONS
Any amendment, addition, completion or correction to the General terms
and conditions herein must be made in writing and accepted by both Parties.
13 - COMPETENT COURT AND APPLICABLE LAW
The Court of Milan has the sole jurisdiction as to any dispute arising in
relation to the validity, interpretation, execution and/or cancellation of the
Contracts and/or General terms and conditions herein. The applicable law
is Italian Law.
QUALITY CERTIFICATION
Matteograssi S.p.a. works within a Quality System in compliance with the
UNI EN ISO 9001:2008 standard certified by the Swiss Company “S.Q.S.
Association Suisse pour Systémes de Qualitè et de Management”.
GUARANTEE OF CONFORMITY
The Products subject-matter of the Contracts are covered by the “legal
guarantee of conformity” set forth in articles 128 and subsequent of Legislative Decree no. 206 of September 6th, 2005 (the so-called “Consumption
Code”, in which Legislative Decree no. 24/2002 has converged and that in
turn had acknowledged Directive 1999/44/CE), as modified and widened
by the following provisions.
The guarantee consists in the restoration of Product conformity by repairing
or replacing them, according to the terms and methods provided by the
aforesaid regulation.
The guarantee is valid for 6 years from the delivery date of the Product for
supporting structures and leather covering; it is valid for 3 years from the
delivery date of the Product for fabric covering and for all the components
(hardware, mechanisms, additional sliding parts, etc.).
The report of any conformity defect of the Product must be sent to Matteograssi S.p.A., as provided by art.10, no later than 2 (two) months from
when the defect is discovered, enclosing a copy of the guarantee certificate
together with a copy of the fiscal purchase document. Any conformity
defects of a Product or of its part do not exempt the Customer from the
obligation to collect the remaining ordered Products.
The guarantee is not valid for defects deriving from an improper use of the
Product or from an improper cleaning and maintenance operation. As for
this last aspect, refer to the “Products suggested for maintenance” guide
enclosed with each Product.
The guarantee is not valid for the Products and for parts of Products that
present a normal wear and tear or have been tampered or modified by
subjects not explicitly authorised in this sense by Matteograssi S.p.A.
Technical Information
Covers
High Quality (HQ).
Cuoio Miura (CM). Coach hide . It is produced from bullskin exclusively
of European origin. The part normally used is the back, thickness is from
2,2 to 2,4 mm. It is chrome and vegetable tanned, dyed in the tub with
pure aniline and finished with polyurethanic pigments.
Pelle Sweet (cat. S). Soft leather. Fullgrain cowskin exclusively European
origin, natural grain. Thickness is from 1,8 to 2,0 mm, obtained with chrome
and vegetable tanning, dyed in the tub with pure aniline and finished with
aniline.
Cuoio Classic (CU). Coach hide. It is produced from fullgrain cowskin
exclusively of European origin. The part normally used is the shoulder,
thickness is from 3 to 4 mm. It is vegetable tanned, dyed in the tub with pure
aniline and finished with aniline and semi-aniline depending on the colour.
Pelle Pure (cat. U). Soft leather.Fullgrain cowskin exclusively of European
origin with smooth natural grain. Thickness is from 1,4 to 1,6 mm, obtained
with chrome and vegetable tanning, dyed in the tub with pure aniline.
Cuoietto (CS). Soft leather. Fullgrain cowskin exclusively European origin. Thickness is from 1,8 to 2,0 mm, obtained with chrome and vegetable
tanning, dyed in the tub with pure aniline and finished with aniline.
Pelle Nabuk (cat. N). Natural grain cowskin, suede finish, exclusively
European origin. Thickness from 1,1 to 1,3 mm, obtained with chrome
tanning , dyed in the tub with pure aniline.
Pelle Soft (PS). Soft Leather. Cowskin with thickness from 1,4 to 1,6
mm., obtained with chrome tanning, dyed in the tub with pure aniline and
finished with polyurethanic pigments.
Pelle Fire (PF). Soft Leather. Cowskin with thickness from 1,1 to 1,3 mm.,
obtained with crome tanning, dyed in tub with pure aniline and finished
with polyurethanic pigments, fire resistant "Classe 1".
Pelle Smooth (PT). Soft leather. It is produced from smooth grain
cowskin of European origin with thickness from 1,0 to 1,2 mm. Obtained
with chrome tanning, dyed in the tub with pure aniline and finished with
polyurethanic pigments.
Pelle Light (PL). Soft Leather. Fullgrain cowskin of European origin with
thickness from 1,4 to 1,6 mm., obtained with chrome and vegetable tanning.
Dyed in the tub with pure aniline and finished with aniline and semi-aniline
depending on the colour.
Pelle Forest (PR). Soft Leather. Fullgrain cowskin exclusively European
origin. Thickness is from 1,4 to 1,6 mm, obtained with chrome tanning,
dyed in the tub with pure aniline. Natural grain suede with manual forming.
Legenda on Covers
CM:
CU:
CS:
Cuoio Miura
Cuoio Classic
Cuoietto
HQ:
PS:
PF:
PT:
PL:
PR:
Pelle Soft
Pelle Fire
Pelle Smooth
Pelle Light
Pelle Forest
C.O.M.: Customer own material
S
U
N
Pelle Sweet
Pelle Pure
Pelle Nabuk
Technical Information
Wood finishes
Glasses
Mat Lacquer (H) Closed pore pigment base , embossed mat polyurethanic
finish. It is available in all the colours of the collection.
Persia Walnut (N) (Junglas regia). Semi-open pore mat antiyellowing
transparent polyurethanic finish.
Oak (Q) (Quercus alba). Open pore mat finish, semi-transparent for
stained graphite (QG) and for bleached (QS), pigment base for lacquered
black (QN) and for lacquered grey (QY). The varnishes used for the finish
are the following:
- antiyellowing polyurethanic for stained graphite (QG);
- acrylic for bleached (QS);
- polyurethanic for lacquered black (QN) and lacquered grey (QY).
It is available in all the colours of the collection.
Clear glass. Transparent, bevelled clear glass. Thickness as per price list.
Satined. Bevelled glass obtained by acid processing. Thickness as per
price list.
Bronze. Bevelled and tempered bronze glass, with varnishing on reverse
side. Thickness as per price list.
Smoked. Bevelled and tempered smoked glass, with varnishing on reverse
side. Thickness as per price list.
Black. Bevelled and tempered glass black painted on the reverse side.
Thickness as per price list.
White. Bevelled and tempered extralight glass white painted on the
reverse side. Thickness as per price list.
Our wooden products are qualified by the brand Vero Legno. This brand
guarantees the client on the authenticity of the wooden product against
any imitation (www.verolegno.it).
As specified in the price list, some products are supplied with tempered
glass. For others it is possible to get the tempered version upon request.
General notes on wood
The wood used by Matteograssi, thanks to its authenticity certificate, can
show differences in colour shades, in veneers in the same furniture and
in particular between two pieces of furniture. Exposure of the product to
light and time will change the colour shades.
Epoxy painted (A). Finishing obtained with epoxypolyester resins base
applied with a film from 80 to 120 micron thickness and stoved.
Available in the colours of our metal finishes collection.
Anodizing (B). Finishing obtained with a patented process of electroimpregnation. This finish is exclusive for aluminium parts. The thickness is
from 10 to 20 micron. Available in the colours of our metal finishes collection.
Chrome Plating (D). Finishing obtained with galvanic process of two
nickel-plating layers and one surface chrome layer.
The whole thickness is from 10 to 20 micron. Available in the colours of
our metal finishes collection.
Burnishing (E). Finish obtained through manual oxidation of the metal
or through immersion. It is protected on the surface with a transparent
epoxy painting.
Polished Aluminium (L). Finishing for aluminium parts obtained with
vegetable fibre polishing and polishing paste.
Satined Nickel Plating (M01). Finishing obtained with galvanic process
of multi-layer nickel-plating, with one stained layer on the surface protected
with epoxy trasparent varnishings. The whole thickness is about 20 micron.
Black polished Nickel Plating (M02). Finishing obtained with galvanic
process of multi-layer black nickel-plating, with epoxy trasparent varnishings
on the surface. The whole thickness is about 20 micron.
Satined stainless steel (W). The glazing of the stainless steel is one finish
obtained directly on the same material, by a light brushing in one direction
and with a rotating metallic brush, always in one direction.
Legenda on wood finishes
H:
N:
Q:
HB
HC
HG
HN
NC
mat white lacquered "Laccato opaco bianco"
mat creta lacquered "Laccato opaco creta"
mat grey lacquered "Laccato opaco grigio"
mat black lacquered "Laccato opaco nero"
Persia walnut "Noce Persia naturale"
QG
QN
QS
QY
oak stained graphite "Rovere tinto grafite"
oak black lacquered "Rovere laccato nero"
whitened oak "Rovere sbiancato"
oak grey lacquered "Rovere laccato grigio"
Marbles and granites
Bianco Carrara marble. White/Grey marble with white veins and natural
glossy or polyester finish. Origin: Tuscan Alps (Italy).
Nero Marquinia marble. Black bottom marble with white veins and
polyester finish. Origin: Guipuzcoa (Spain).
Nero Assoluto granite. Fine and uniform grain black granite, natural
polished finish; the surface may have lighter shades, on a darker background,
Origin: South Africa
General notes on glasses
Metal finishes
Legenda on metal finishes
A:
A42
Semi-polished black "Nero semilucido"
A43
Dark grey "Grigio scuro"
A45
Golden "Dorato"
A48
Light grey "Grigio light"
A49
Aluminium grey "Grigio alluminio"
A51
Titanium "Titanio"
A52
White "Bianco"
B:
B01
Natural "Naturale"
D:
D20
Chrome Plating "Cromatura"
E:
E01
Burnishing "Brunitura"
L:
L01
Polished Aluminium "Alluminio lucidato"
M:
M01
Satined Nickel Plating "Nichelatura satinata"
M02
Black polished Nickel Plating "Nichelatura nera lucida"
W:
W01
Satined stainless steel "Acciaio inox satinato"
Notes and suggestions
General Information on Covers
Coach hide and soft leather of first quality selected by Matteograssi S.p.A
can often show on surface small imperfections as scars, scratches, roughness
or be different in colour shade or in degree of glossiness.
This is synonym of a procedure which fully respects the natural quality of
the material, without any artificial treatment for pore covering, due to its
dye in the tub.
Different shades from one skin to another and on the same skin or small
imperfections cannot be considered as conformity defects or material defects.
Exposure of the products to light and the passing of time will change the
colour of the cover used.
Cover stitchings are made with polyester yarn, cotton fibre-reinforced
and twisted.
The edges of the products in coach hide are finished in the following colours:
- brown for coloniale, biscotto and natural coach hide
- black for all other colours
The use of some qualities of leather (CS - Cuoietto) could involve, sometimes, changes on the type and number of stitching.
Our covers in CU are purchased exclusively from tanneries members of
the Association "Vera Pelle Italiana Conciata al Vegetale" (Genuine
Italian Leather Vegetable Tanned).
Stain Repellent Superficial Treatment for Soft Leather and
Coach Hide.
Stain, water and oil repellent treatments with a basis of resins are the most
advanced superficial protection available today on the market. Treated soft
leather or coach hide remains protected against stains, without changing
its own look, touch and colour. The treatments are totally inert, they do
not cause any sort of allergic reaction and improve the reaction to fire of
the treated materials. The superficial protection is perfectly transparent to
UV-rays and does not affect the natural shade of colour.
On request the stain repellent treatment is possible on all the products;
on some products it is a standard version and is specified in the technical
information. However the same treatment is still possible also after the
purchase of the product, since it is not permanent.
Certifications complying with Fire Safety Regulations
All products in this price list can be supplied, upon request, with different
price quotations than the ones indicated in the price list and if a minimum
quantity is reached, with certifications that state they comply with Fire
Safety Regulations in force such as classe 1IM / CAL117 / BS5852 / M2.
Method for Measurement of Seat Heights and Product Sizes
The measurement of the height of office chairs has been undertaken in
accordance with standard UNI EN 1335-1, "seat height" measurement
corresponding to the measurement "a" indicated in the standard. These
height refers to chairs with bases on wheels, excluding those fitted with
"GRR" mechanisms, measured with bases on glides. It must also be pointed
out that the "width" and "depth" measurement indicated in the price list for
the swivel chairs have been made by excluding the overall base dimensions.
The measurement of the height from the ground of padded chairs (armchairs,
small armchairs and sofas) has been calculated by summing the average
between the minimum height (the highest point of the rear strip of the
cushion) and the maximum height (the top of cushion).
For all other chairs models not included in the categories cited above and
for the measurement of each product in the price-list, the measurements
have been made on the maximum overall dimensions.
All measurements indicated in this price-list, excluding the ones measured
according to UNI EN 1335-1, the tolerance admitted is ± 2%.
Advice on Price list Consultation
This price list has been prepared in order to facilitate order compilation and
also to provide all the necessary information regarding technical, construction
and dimension features.
For each model, the top margin of the page will indicate the special technical
characteristics of the same, the minimun order quantities and the surcharge
for any special finishes or measurements.
As regards the metal and wood finishes and the leather categories, they are
classified in groups which can be identified by means of the legenda shown
above and are visible in the special colour cards.
Indice
catalog reference
product typology
Sofas
Armchairs and
sofas
model description
page
2Leather
2-Zip
Domino
Elémentaire
Jazz
KO
Korium
Openside
Strato
17
18-21
22-30
31
32-35
36
37
38-43
44
Tables
Low tables
Strato
45
Bookshelves
Bookshelves
2Leather
46-49
Small
Armchairs
Small Armchairs
Aretè
Britt
Coco Chair
Court
Derby
Elémentaire
Esquire
Kelly
Korium
MG
50
51,52
53
53
54
55
56
57
58
59
Carol GR
Carol
Mizar
Zoe
Kompass
Kube
Meeting
60-62
63
80-90
91
64-67
68-74
75-79
Work Seats
Office seatings
Area seatings
East End
Writing desks
Tables
Drawer units
Cabinets
Conference
tables
Metron
Tops writing desks 93
Rectangular tops
94
Square tops
95
Round tops
96
Legs and side panels 97
Accessories
97-99
Drawer units
100
Low cabinets
101,102
High cabinets
103
Equipment and
104
accessories
Modular
105-107
Rectangular
108
Special size tops
109
Writing desks and Coach hide covered 110-113
tables
In glass
114
Cabinets
Container cabinets 115
116,117
Drawer units
Drawer units
118
Bases and tops
Bases for special
size tables
Tops for special
119,120
size tables
Bases for glass tops 121
Glass tops in special
121
size
catalog reference
product typology
model description
Must
Desks
Tops for writing
desks
Bases for desks
Accessories for
desks
Tops for tables
Bases for tables
Accessories for
tables
Tables
Wave
Cabinets
Theatre
Doors
Accessories
Accessories
Covers
page
123
124
125,126
127-129
130-132
133,134
135-137
Cabinets
138
Accessories
Drwawer units and 139,140
low cabinets
141,142
Loomy
Glass tops
Desk pad
T.Net
143
144
145
146
Coach hide/leathers 147
Cleaning products 148
Sofas
Low tables
Bookshelves
Small armchairs
Work Seats
East End
Metron
Must
Wave
Theatre
"The bitterness of poor quality remains long after the sweetness
Accessories
of low price is forgotten."
(Benjamin Franklin)
Covers
2Leather
Design: Rodolfo Dordoni - 2005
cover: soft leather
frame: shell in rigid polyurethane foam
shell padding: polyurethane foam of
different densities
seat cushion padding: polyurethane
foam of different densities with doublelayer padding
swivel base: satined stainless steel or
chrome plated steel
glides: no-slip, plastic
Upholstered swivel armchair covered with soft leather.
2L01
low lounge chair
PM1 maintenance set included.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
overall cm (in) arm. cm (in)
height
seat cm (in)
metal
finish
covers
86 (33 7/8")
83 (32 3/4")
79 (31 1/8")
43 (17")
W
PS/PF
PT/PL/PR
HQ
2.259,00
2.455,00
2.776,00
D
PS/PF
PT/PL/PR
HQ
2.492,00
2.690,00
3.010,00
49 (19 1/4")
ARMCHAIRS AND SOFAS
(Prices in Euro) September 2009
17
2-Zip
cover: soft leather
frame: wood
padding: polyurethane foam of different
densities with double-layer padding
lining: 100% cotton fibre and 70% cotton
fibre - 30% PP (polypropylene)
belts: flat-section in polypropylene and
latex
base: black epoxy painted steel
feet: plastic
Upholstered armchairs and sofas
covered with soft leather.
depth
cm (in)
height
height
height
seat cm (in)
ZS01
armchair
101 (39 3/4")
88 (34 5/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
3.315,00
3.939,00
4.572,00
ZS02
2 seater sofa
166 (65 3/8")
88 (34 5/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.316,00
5.181,00
6.086,00
ZS03
3 seater sofa
216 (85 1/8")
88 (34 5/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
5.402,00
6.509,00
7.691,00
ZS04
4 seater sofa
296 (116 5/8") 88 (34 5/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
6.832,00
8.226,00
9.715,00
ZS31
bench
65 (25 5/8")
37 (14 5/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
1.190,00
1.404,00
1.613,00
65 (25 5/8")
ARMCHAIRS AND SOFAS
18
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
2-Zip
cover: soft leather
frame: wood
latex
feet: plastic
Modular sofas.
Upholstered elements and covered
with soft leather.
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
ZS11
central element
65 (25 5/8")
88 (34 5/8")
68 (26 3/4")
37 (14 5/8")
PS/PF/
PT/PL/PR
CS/HQ
1.874,00
2.229,00
2.597,00
ZS12
central element "large seat version"
90 (35 1/2")
88 (34 5/8")
68 (26 3/4")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.219,00
2.646,00
3.096,00
ZS13
2 seater central element
130 (51 1/4")
88 (34 5/8")
68 (26 3/4")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.891,00
3.484,00
4.123,00
ZS35T
end element
84 (33 1/8")
84 (33 1/8")
37 (14 5/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
1.478,00
1.749,00
2.032,00
ZS35A
low corner element
84 (33 1/8")
84 (33 1/8")
37 (14 5/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
1.478,00
1.749,00
2.032,00
ARMCHAIRS AND SOFAS
19
2-Zip
cover: soft leather
frame: wood
latex
feet: plastic
Modular sofas.
with soft leather.
depth
cm (in)
height
height
height
seat cm (in)
ZSA
corner element
88 (34 5/8")
88 (34 5/8")
68 (26 3/4")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.925,00
3.447,00
3.963,00
ZS21
lounge seat
65 (25 5/8")
153 (60 1/4")
68 (26 3/4")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.776,00
3.287,00
3.810,00
ZS22
lounge seat
90 (35 1/2")
153 (60 1/4")
68 (26 3/4")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
3.247,00
3.871,00
4.517,00
ZS35
bench 'large seat version' or end element
84 (33 1/8")
84 (33 1/8")
37 (14 5/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
1.592,00
1.878,00
2.154,00
ZSB
armrest
18 (7 1/8")
84 (33 1/8")
51 (20 1/8")
PS/PF
PT/PL/PR
CS/HQ
824,00
980,00
1.145,00
51 (20 1/8")
ARMCHAIRS AND SOFAS
20
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
2-Zip
cover: soft leather
frame: wood
latex
feet: plastic
Modular sofas.
with soft leather.
ZS210
composed of:
ZS220
composed of:
ZS240
composed of:
ZS250
composed of:
height
seat cm (in)
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
2 x ZS13
1 x ZSA
2 x ZSB
237 (93 3/8")
237 (93 3/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
10.352,00
12.374,00
14.497,00
2 x ZS13
1 x ZSA
1 x ZS21
1 x ZS35
1 x ZSB
302 (119")
304 (119 3/4") 68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
13.896,00
16.558,00
19.315,00
2 x ZS13
1 x ZS35A
1 x ZS35
1 x ZSB
302 (119")
237 (93 3/8")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
9.674,00
11.574,00
13.575,00
2 x ZS12
1 x ZS22
1 x ZS35
1 x ZSB
372 (146 5/8") 153 (60 1/4")
68 (26 3/4")
51 (20 1/8")
37 (14 5/8")
PS/PF
PT/PL/PR
CS/HQ
10.099,00
12.020,00
14.005,00
ARMCHAIRS AND SOFAS
21
Domino
Design: Piero Lissoni - 2010
cover: soft leather
base frame: steel
armrest: steel plate, chromed, satined
nikel plated or powder varnished
densities with double layer padding
lining: 100% cotton fibre
belts: flat section in polypropylene and
latex
glides: plastic
Sofas upholstered and covered with
soft leather.
DM02
2 seater sofa
DM03
3 seater sofa
DM04
4 seater sofa
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
149 (58 3/4")
79 (31 1/8")
65 (25 5/8")
35 (13 3/4")
A
219 (86 1/4")
289 (86 1/4")
79 (31 1/8")
65 (25 5/8")
79 (31 1/8")
65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
51 (20 1/8")
35 (13 3/4")
35 (13 3/4")
ARMCHAIRS AND SOFAS
22
covers
PRICE
VAT excl.
PS/PF
PT/PL/PR
HQ
3.065,00
3.399,00
3.874,00
D/M PS/PF
PT/PL/PR
HQ
3.551,00
3.891,00
4.360,00
PS/PF
PT/PL/PR
HQ
3.921,00
4.448,00
5.192,00
D/M PS/PF
PT/PL/PR
HQ
4.237,00
4.771,00
5.514,00
PS/PF
PT/PL/PR
HQ
4.758,00
5.479,00
6.492,00
D/M PS/PF
PT/PL/PR
HQ
5.274,00
5.994,00
7.014,00
A
A
ARMCHAIRS AND SOFAS
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
soft leather.
DMP02
2 seater bench
DMP03
3 seater bench
DMP04
4 seater bench
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
140 (55 1/8")
72 (28 3/8")
35 (13 3/4")
35 (13 3/4")
A
210 (82 3/4")
72 (28 3/8")
35 (13 3/4")
280 (110 3/8") 72 (28 3/8")
35 (13 3/4")
35 (13 3/4")
35 (13 3/4")
covers
PRICE
VAT excl.
PS/PF
PT/PL/PR
HQ
2.005,00
2.210,00
2.497,00
D/M PS/PF
PT/PL/PR
HQ
2.386,00
2.591,00
2.878,00
PS/PF
PT/PL/PR
HQ
2.485,00
2.773,00
3.183,00
D/M PS/PF
PT/PL/PR
HQ
2.649,00
2.943,00
3.346,00
PS/PF
PT/PL/PR
HQ
2.971,00
3.346,00
3.844,00
D/M PS/PF
PT/PL/PR
HQ
3.370,00
3.745,00
4.266,00
A
A
ARMCHAIRS AND SOFAS
ARMCHAIRS AND SOFAS
23
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
soft leather.
width
cm (in)
DM43
3 seater back to back sofa
DM44
4 seater back to back sofa
219 (86 1/4")
289 (86 1/4")
depth
cm (in)
height
height
152 (59 7/8")
152 (59 7/8")
65 (25 5/8")
65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
height
seat cm (in)
35 (13 3/4")
35 (13 3/4")
ARMCHAIRS AND SOFAS
24
metal
finish
covers
PRICE
VAT excl.
PS/PF
PT/PL/PR
HQ
7.131,00
8.122,00
9.515,00
D/M PS/PF
PT/PL/PR
HQ
7.799,00
8.784,00
10.178,00
PS/PF
PT/PL/PR
HQ
7.770,00
7.952,00
10.863,00
D/M PS/PF
PT/PL/PR
HQ
8.614,00
9.827,00
11.525,00
A
A
ARMCHAIRS AND SOFAS
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
Modular sofas upholstered and covered with soft leather.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
PRICE
VAT excl.
DM12
2 seater element sofa
140 (55 1/8")
79 (31 1/8")
65 (25 5/8")
51 (20 1/8")
35 (13 3/4")
PS/PF
PT/PL/PR
PCF
HQ
2.508,00
2.843,00
3.071,00
3.318,00
DM13
210 (82 3/4")
79 (31 1/8")
65 (25 5/8")
51 (20 1/8")
35 (13 3/4")
PS/PF
PT/PL/PR
HQ
3.358,00
3.891,00
4.636,00
PS/PF
PT/PL/PR
HQ
4.201,00
4.923,00
5.936,00
PS/PF
PT/PL/PR
HQ
2.737,00
3.100,00
3.604,00
DM14
DMAI
Internal corner element sofa
280 (110 3/8") 79 (31 1/8")
123 (48 1/2")
65 (25 5/8")
123 (48 1/2")
65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
35 (13 3/4")
35 (13 3/4")
ARMCHAIRS AND SOFAS
ARMCHAIRS AND SOFAS
25
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
DMAE
External corner element sofa
DMCI
Internal curved element sofa
DMCE
External curved element sofa
DMP12
2 seater element bench
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
123 (48 1/2")
123 (48 1/2")
65 (25 5/8")
35 (13 3/4")
179 (70 1/2")
174 (68 1/2")
140 (55 1/8")
92 (36 1/4")
92 (36 1/4")
79 (31 1/8")
65 (25 5/8")
65 (25 5/8")
65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
51 (20 1/8")
51 (20 1/8")
35 (13 3/4")
35 (13 3/4")
35 (13 3/4")
ARMCHAIRS AND SOFAS
26
metal
finish
covers
PRICE
VAT excl.
PS/PF
PT/PL/PR
2.362,00
2.673,00
HQ
3.112,00
PS/PF
PT/PL/PR
HQ
2.890,00
3.276,00
3.815,00
PS/PF
PT/PL/PR
HQ
2.620,00
2.971,00
3.463,00
PS/PF
PT/PL/PR
HQ
1.548,00
1.753,00
2.040,00
ARMCHAIRS AND SOFAS
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
DMP13
210 (82 3/4")
72 (28 3/8")
35 (13 3/4")
35 (13 3/4")
PS/PF
PT/PL/PR
HQ
2.028,00
2.315,00
2.725,00
DMP14
280 (110 3/8") 72 (28 3/8")
35 (13 3/4")
35 (13 3/4")
PS/PF
PT/PL/PR
HQ
2.515,00
2.890,00
3.411,00
DMPA
corner element bench
123 (48 1/2")
123 (48 1/2")
35 (13 3/4")
35 (13 3/4")
PS/PF
PT/PL/PR
HQ
1.525,00
1.730,00
2.016,00
DMPC
curved element bench
174 (68 1/2")
83 (32 3/4")
35 (13 3/4")
35 (13 3/4")
PS/PF
PT/PL/PR
HQ
1.677,00
1.905,00
2.228,00
ARMCHAIRS AND SOFAS
ARMCHAIRS AND SOFAS
27
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
width
cm (in)
DMB/SX
DMB
DMB
additional armrest
DMB/DX
right end armrest
DMB/SX
left end armrest
DMPD/SX
DMPD
additional foot
DMPD/DX
right end foot
DMPD/SX
left end foot
depth
cm (in)
height
height
height
seat cm (in)
covers
PRICE
VAT excl.
DMB/DX
5 (1 3/4")
DMPD
70 (27 5/8")
51 (20 1/8")
51 (20 1/8")
A
D/M
294,00
552,00
A
D/M
235,00
423,00
DMPD/DX
5 (1 3/4")
70 (27 5/8")
18 (7 1/8")
ARMCHAIRS AND SOFAS
28
metal
finish
ARMCHAIRS AND SOFAS
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
Examples of compositions
width
cm (in)
DM210
composed by:
DM230
composed by:
2 x DM13
1 x DMB/DX
1 x DMB/SX
1 x DMB
2 x DM12
1 x DM13
1 x DMAI
1 x DMAE
1 x DMB/DX
1 x DMB/SX
4 x DMB
depth
cm (in)
435 (171 3/8") 79 (31 1/8")
height
height
height
seat cm (in)
65 (25 5/8")
35 (13 3/4")
544 (214 3/8") 404 (159 1/8") 65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
35 (13 3/4")
ARMCHAIRS AND SOFAS
metal
finish
covers
PRICE
VAT excl.
PS/PF
PT/PL/PR
HQ
7.598,00
8.664,00
10.154,00
D/M PS/PF
PT/PL/PR
HQ
8.372,00
9.438,00
10.928,00
PS/PF
PT/PL/PR
HQ
15.237,00
17.114,00
D/M PS/PF
PT/PL/PR
HQ
16.785,00
18.662,00
21.300,00
A
A
19.752,00
ARMCHAIRS AND SOFAS
29
Domino
cover: soft leather
base frame: steel
latex
glides: plastic
Examples of compositions
width
cm (in)
DM220
composed by:
DM240
composed by:
1 x DM13
1 x DMP13
1 x DMB/DX
1 x DMB/SX
1 x DMB
1 x DM12
2 x DMCE
2 x DMCI
1 x DMB/DX
1 x DMB/SX
4 x DMB
depth
cm (in)
430 (171 3/8") 79 (31 1/8")
710 (279 3/4") 196 (77 3/8")
height
height
height
seat cm (in)
65 (25 5/8")
35 (13 3/4")
65 (25 5/8")
51 (20 1/8")
51 (20 1/8")
35 (13 3/4")
covers
PRICE
VAT excl.
A
PS/PF
PT/PL/PR
HQ
6.268,00
7.088,00
8.243,00
D/M
PS/PF
PT/PL/PR
7.042,00
7.862,00
HQ
9.017,00
PS/PF
PT/PL/PR
15.292,00
17.101,00
HQ
19.638,00
D/M PS/PF
PT/PL/PR
16.840,00
18.649,00
HQ
21.186,00
A
ARMCHAIRS AND SOFAS
ARMCHAIRS AND SOFAS
30
metal
finish
Elémentaire
Design: Jean Nouvel - 2004
cover: soft leather
frame: wood
densities with double-layer padding.
latex
feet: plastic
Upholstered sofas and soft leather
covered.
depth
cm (in)
height
height
height
seat cm (in)
EM01
armchair
82 (32 1/4")
86 (33 7/8")
83 (32 3/4")
66 (26")
40 (15 3/4")
PS/PF
PT/PL/PR
CS/HQ
2.810,00
3.329,00
4.171,00
EM02
2 seater sofa
142 (56")
86 (33 7/8")
83 (32 3/4")
66 (26")
40 (15 3/4")
PS/PF
PT/PL/PR
CS/HQ
3.625,00
4.346,00
5.518,00
EM03
3 seater sofa
202 (79 5/8")
86 (33 7/8")
83 (32 3/4")
66 (26")
40 (15 3/4")
PS/PF
PT/PL/PR
CS/HQ
4.440,00
5.364,00
6.853,00
EM10
footrest
60 (23 5/8")
53 (20
40 (15 3/4")
40 (15 3/4")
PS/PF
PT/PL/PR
CS/HQ
789,00
931,00
1.173,00
/8")
7
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
ARMCHAIRS AND SOFAS
31
Jazz
Design: Matteo Nunziati - 2008
cover: soft leather
frame: steel
back and base support: dark chrome
plated steel
Double height adjustable back.
covered.
JZ02L
2 seater sofa
JZ03L
3 seater sofa
depth
cm (in)
height
height
height
seat cm (in)
140 (55 1/8")
99 (39")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
4.708,00
5.162,00
5.913,00
210 (82 3/4")
99 (39")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.785,00
6.418,00
7.458,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.507,00
6.074,00
6.996,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
3.219,00
3.496,00
3.939,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
3.952,00
4.338,00
4.966,00
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
JZ06L/SX
JZ06L/SX
3 seater sofa with short left back
JZ13L
3 seater bench
210 (82 3/4")
99 (39")
68/75
140 (55 1/8")
95 (37 3/8")
68/75
210 (82 3/4")
95 (37 3/8")
68/75
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
ARMCHAIRS AND SOFAS
32
covers
JZ06L/DX
JZ06L/DX
3 seater sofa with short right back
JZ12L
2 seater bench
68/75
metal
finish
PRICE
VAT excl.
width
cm (in)
Jazz
cover: soft leather
frame: steel
plated steel
accessories: coach hide covered aluminium
Upholstered modular elements and
soft leather covered and accessories.
depth
cm (in)
height
height
height
seat cm (in)
135 (53 1/4")
135 (53 1/4")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
6.387,00
6.849,00
7.599,00
JZAEL
external corner element
135 (53 1/4")
135 (53 1/4")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.827,00
6.215,00
6.842,00
JZ51
middle low table
30 (11 7/8")
95 (37 3/8")
20 (7 7/8")
CM
CU
623,00
751,00
JZ61
tray for the seat
26 (10 1/4")
54 (21 1/4")
12 (4 3/4")
CM
CU
395,00
524,00
JZ62
tray for the backrest
52 (20 1/2")
34 (13 3/8")
12 (4 3/4")
CM
CU
352,00
481,00
JZAIL
corner element
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
ARMCHAIRS AND SOFAS
33
Jazz
cover: soft leather
frame: steel
plated steel
covered with button-back.
depth
cm (in)
height
height
height
seat cm (in)
JZ02C
2 seater sofa
140 (55 1/8")
99 (39")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.674,00
6.240,00
7.174,00
JZ03C
3 seater sofa
210 (82 3/4")
99 (39")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
6.990,00
7.137,00
8.805,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
6.719,00
7.285,00
8.208,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
3.662,00
3.939,00
4.419,00
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
4.744,00
5.144,00
5.796,00
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
JZ06C/SX
JZ06C/SX
3 seater sofa with short left back
JZ06C/DX
3 seater sofa with short right back
68/75
covers
JZ06C/DX
210 (82 3/4")
99 (39")
JZ12C
2 seater bench
140 (55 1/8")
95 (37 3/8")
68/75
JZ13C
3 seater bench
210 (82 3/4")
95 (37 3/8")
68/75
68/75
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
ARMCHAIRS AND SOFAS
34
metal
finish
PRICE
VAT excl.
width
cm (in)
Jazz
cover: soft leather
frame: steel
plated steel
accessories: coach hide covered aluminium
covered with button-back.
depth
cm (in)
height
height
height
seat cm (in)
135 (53 1/4")
135 (53 1/4")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
7.236,00
7.698,00
8.448,00
135 (53 1/4")
135 (53 1/4")
68/75
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
6.769,00
7.156,00
7.783,00
JZ51
middle low table
30 (11 7/8")
95 (37 3/8")
20 (7 7/8")
CM
CU
623,00
751,00
JZ61
tray for the seat
26 (10 1/4")
54 (21 1/4")
12 (4 3/4")
CM
CU
395,00
524,00
JZ62
tray for the backrest
52 (20 1/2")
34 (13 3/8")
12 (4 3/4")
CM
CU
352,00
481,00
JZAIC
corner element
JZAEC
external corner element
(26 3/4" - 29 1/2")
(26 3/4" - 29 1/2")
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
ARMCHAIRS AND SOFAS
35
KO
Design: Kunihide Oshinomi - 2000
cover: soft leather
frame: wood
densities with double-layer padding. Steel
springs.
latex
feet: chrome plated zamak
Armchair and sofas upholstered and
covered with soft leather.
depth
cm (in)
height
height
height
seat cm (in)
KO21
armchair
95(37 3/8")
85 (33 1/2")
72 (28 3/8")
56 (22 1/8")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
3.778,00
4.277,00
5.101,00
KO22
2 seater sofa
168 (66 1/4")
85 (33 1/2")
72 (28 3/8")
56 (22 1/8")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.120,00
5.834,00
7.014,00
KO24
3 seater sofa
238 (93 3/4")
85 (33 1/2")
72 (28 3/8")
56 (22 1/8")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
6.609,00
7.544,00
9.069,00
KO23
2 seater sofa - large seat version
195 (76 7/8")
85 (33 1/2")
72 (28 3/8")
56 (22 1/8")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
5.693,00
6.485,00
7.790,00
KOP21
bench
70 (27 5/8")
54 (21 1/4")
40 (15 3/4")
40 (15 3/4")
PS/PF
PT/PL/PR
HQ
1.613,00
1.771,00
2.032,00
ARMCHAIRS AND SOFAS
36
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
Korium
Design: Tito Agnoli - 1978
cover: coach hide - soft leather
frame: oval section tubular steel
latex
glides: black polyamide moulded
Armchair and sofas with coach hide
covered frame and cushions covered
with soft leather.
KM3/1
armchair
KM3/2
2 seater sofa
KM3/3
3 seater sofa
PMI maintenance set included.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
94 (37")
86 (33 7/8")
77 (30 3/8")
43 (17")
154 (60 5/8")
216 (85 1/8")
86 (33 7/8")
86 (33 7/8")
77 (30 3/8")
77 (30 3/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
43 (17")
43 (17")
metal
finish
covers
PRICE
VAT excl.
CM +
PS/PF
CM +
PT/PL/PR
4.214,00
CU +
PS/PF
CU +
PT/PL/PR
4.965,00
CM +
PS/PF
CM +
PT/PL/PR
5.817,00
CU +
PS/PF
CU +
PT/PL/PR
6.690,00
CM +
PS/PF
CM +
PT/PL/PR
7.867,00
CU +
PS/PF
CU +
PT/PL/PR
9.000,00
4.559,00
5.309,00
6.340,00
7.211,00
8.574,00
9.707,00
ARMCHAIRS AND SOFAS
37
Openside
Design: Franco Poli - 2002
cover: soft leather
frame: steel and chipboard panels
seat padding: polyurethane foam of different densities with double-layer padding.
Steel springs.
back padding: moulded polyurethane
foam with double-layer padding
feet: black painted solid wood
Sofas upholstered and soft leather
covered.
width
cm (in)
PN112/SX
left 2 seater sofa
height
seat cm (in)
87 (34 1/4")
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
5.667,00
6.509,00
7.888,00
255 (100 1/2") 87 (34 1/4")
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
6.147,00
7.040,00
8.497,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
6.713,00
7.722,00
9.383,00
203 (80")
DX - right
SX - left
PN123/SX
left 3 seater sofa
255 (100 1/2") 87 (34 1/4")
64 (25 1/4")
PN123/DX
right 3 seater sofa
ARMCHAIRS AND SOFAS
38
covers
DX - right
PN112/DX
right 2 seater sofa
PN113
3 seater sofa
metal
finish
PRICE
VAT excl.
height
height
SX - left
depth
cm (in)
Openside
cover: soft leather
Steel springs.
covered.
width
cm (in)
SX - left
PN011/SX
left 1 seater sofa
height
height
height
seat cm (in)
117 (46 1/8")
SX - left
87 (34 1/4")
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
3.404,00
3.902,00
4.727,00
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.178,00
4.776,00
5.760,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.566,00
5.218,00
6.289,00
DX - right
192 (75 5/8")
87 (34 1/4")
PN012/DX
right 2 seater sofa
DX - right
SX - left
PN013/SX
left 3 seater sofa
covers
DX - right
PN011/DX
right 1 seater sofa
PN012/SX
left 2 seater sofa
metal
finish
PRICE
VAT excl.
depth
cm (in)
244 (96 1/8")
87 (34 1/4")
64 (25 1/4")
PN013/DX
right 3 seater sofa
ARMCHAIRS AND SOFAS
39
Openside
cover: soft leather
Steel springs.
covered.
width
cm (in)
SX - left
PN021/SX
left 1 seater sofa
depth
cm (in)
height
seat cm (in)
162 (63 7/8")
SX - left
87 (34 1/4")
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.191,00
4.813,00
5.834,00
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.880,00
5.600,00
6.780,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
5.206,00
5.988,00
7.266,00
DX - right
192 (75 5/8")
87 (34 1/4")
PN022/DX
right 2 seater sofa
SX - left
PN023/SX
left 3 seater sofa
DX - right
244 (96 1/8")
87 (34 1/4")
64 (25 1/4")
PN023/DX
right 3 seater sofa
ARMCHAIRS AND SOFAS
40
covers
DX - right
PN021/DX
right 1 seater sofa
PN022/SX
left 2 seater sofa
metal
finish
PRICE
VAT excl.
height
height
Openside
cover: soft leather
Steel springs.
covered.
SX - left
PN031/SX
left 1 seater sofa
depth
cm (in)
height
height
height
seat cm (in)
PN032/SX
left 2 seater sofa
117 (46 1/8")
162 (63 7/8")
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.191,00
4.813,00
5.840,00
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
4.874,00
5.594,00
6.775,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
5.262,00
6.042,00
7.316,00
DX - right
192 (75 5/8")
162 (63 7/8")
PN032/DX
right 2 seater sofa
SX - left
PN033/SX
left 3 seater sofa
covers
DX - right
PN031/DX
right 1 seater sofa
SX - left
metal
finish
PRICE
VAT excl.
width
cm (in)
DX - right
244 (96 1/8")
162 (63 7/8")
64 (25 1/4")
PN033/DX
right 3 seater sofa
ARMCHAIRS AND SOFAS
41
Openside
cover: soft leather
Steel springs.
covered.
width
cm (in)
SX - left
PN132/SX
left 2 seater sofa
depth
cm (in)
height
seat cm (in)
203 (80")
162 (63 7/8")
SX - left
64 (25 1/4")
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
6.313,00
7.273,00
8.854,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
6.701,00
7.710,00
9.371,00
64 (25 1/4")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
7.378,00
8.510,00
10.373,00
DX - right
255 (100 1/2") 162 (63 7/8")
64 (25 1/4")
PN133/DX
right 3 seater sofa
SX - left
PN233/SX
left 3 seater sofa
DX - right
255 (100 1/2") 162 (63 7/8")
64 (25 1/4")
PN233/DX
right 3 seater sofa
ARMCHAIRS AND SOFAS
42
covers
DX - right
PN132/DX
right 2 seater sofa
PN133/SX
left 3 seater sofa
metal
finish
PRICE
VAT excl.
height
height
Openside
cover: soft leather
Steel springs.
Benches upholstered and soft leather
covered.
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
PN001
bench
105 (41 3/8")
75 (29 1/2")
37(14 5/8")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.025,00
2.296,00
2.739,00
PN002
bench
180 (70 7/8")
75 (29 1/2")
37(14 5/8")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
2.646,00
2.997,00
3.582,00
PN003
bench
232 (91 3/8")
75 (29 1/2")
37(14 5/8")
37(14 5/8")
PS/PF
PT/PL/PR
CS/HQ
3.127,00
3.551,00
4.247,00
ARMCHAIRS AND SOFAS
43
Strato
Design: Mauro Lipparini - 2004
covered.
cover: soft leather
frame: steel base, upper frame in wood
seat support: polyurethane foam
seat padding: feather cushions with polyurethane
foam inlay
back and armrests padding: polyurethane foam of
different densities with double-layer padding.
lining: 100% cotton fibre and 70% cotton fibre - 30%
PP (polypropylene)
belts: flat-section in polypropylene and latex
base: epoxy painted, chrome or nickel plated steel
rod
glides: plastic
PMI maintenance set included.
Upon request the models SA02, can be
shipped knocked-down with an extra
charge of 5%.
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
SA06
armchair
148 (58 1/4")
102 (40 1/8")
58 (22 7/8")
58 (22 7/8")
40 (15 3/4")
A/D/M PS/PF
PT/PL/PR
HQ
4.781,00
5.372,00
6.338,00
SA04
2 seater sofa
218 (85 7/8")
102 (40 1/8")
58 (22 7/8")
58 (22 7/8")
40 (15 3/4")
A/D/M PS/PF
PT/PL/PR
HQ
6.012,00
6.830,00
8.177,00
SA01
large armchair (love seat)
178 (70 1/8")
102 (40 1/8")
58 (22 7/8")
58 (22 7/8")
40 (15 3/4")
A/D/M PS/PF
PT/PL/PR
HQ
5.206,00
5.871,00
6.959,00
SA02
2 seater sofa - large seat version
278 (109 1/2") 102 (40 1/8")
58 (22 7/8")
58 (22 7/8")
40 (15 3/4")
A/D/M PS/PF
PL
HQ
7.094,00
8.091,00
9.721,00
ARMCHAIRS AND SOFAS
44
covers
PRICE
VAT excl.
width
cm (in)
Strato
Design: Mauro Lipparini - 2004
top: glass thickness 10 mm (3/8"), satined
and black painted
base: epoxy painted, chrome or nickel
plated steel rod
glides: plastic
Low tables with satined and painted
glass, steel base.
SA31N
square low table with black painted glass
SA32N
rectangular low table with black painted
glass
The table is shipped knocked-down.
depth
cm (in)
height
overall cm (in)
metal
finish
102 (40 1/8")
102 (40 1/8")
33 (13")
A/D
2.696,00
M
3.169,00
A/D
3.120,00
M
3.545,00
150 (59")
75 (29 1/2")
33 (13")
covers
PRICE
VAT excl.
width
cm (in)
LOW TABLES
45
2Leather
cover: coach hide
frame: medium density panels
inside bookholders: polished stainless
steel
drawers: coach hide
Bookshelf: modular system covered
with coach hide.
DESCRIPTION
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
PRICE
VAT excl.
Modular system with 2 superimposable modular elements, width cm 100 and cm 150, depth cm 30, the elements can be free standing or wall-hung with special hardware.
The elements can be rotated 180° and can thus be combined both in height and in width to create multiple combinations
element width cm 100
100 (39 3/8")
30 (11 7/8")
30 (11 7/8")
element width cm 150
150 (59 1/8")
30 (11 7/8")
30 (11 7/8")
example of bookshelf on castors.
Maximum limit for superimposed modular
elements: two
example of bookshelf on feet to be positioned
on the floor
Maximum limit for superimposed modular
elements: three
example of bookshelf with several superimposed freestanding elements.
If the bookshelf elements are positioned
against a wall, special hardware is supplied to
prevent the bookshelf from falling down
example of bookshelf with several elements
superimposed by the width.
Each element in width 100 cm carries a
maximum load of 29 kg.
Each element in width cm. 150. carries a
maximum of 48 kg.
The load refers to each modular wall-hung
element.
BOOKSHELVES
46
2Leather
cover: coach hide
steel
drawers: coach hide
with coach hide.
2L10M
modular wall-hung or wall element width
cm 100
2L10C
modular element width cm 100
2L15M
modular wall-hung or wall element width
cm 150
2L15C
modular element width cm 150
width
cm (in)
depth
cm (in)
height
overall cm (in)
100 (39 3/8")
30 (11 7/8")
30 (11 7/8")
100 (39 3/8")
150 (59 1/8")
150 (59 1/8")
30 (11 7/8")
30 (11 7/8")
30 (11 7/8")
30 (11 7/8")
30 (11 7/8")
30 (11 7/8")
covers
PRICE
VAT excl.
CM
1.189,00
CU
1.589,00
CM
1.293,00
CU
1.780,00
CM
1.558,00
CU
2.050,00
CM
1.656,00
CU
2.272,00
BOOKSHELVES
47
2Leather
cover: coach hide
steel
drawers: coach hide
with coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
PRICE
VAT excl.
2L21P
adjustable feet set
125,00
2L21R
4 castors set
299,00
2L10EF
hardware for modular wall-hung element
width cm 100
80 (31 1/2")
2 (3/4")
24 (9 1/2")
209,00
2L15EF
hardware for modular wall-hung element
width cm 150
130 (51 1/4")
2 (3/4")
24 (9 1/2")
244,00
46 (18 1/8")
27 (10 5/8")
8 (3 1/8")
2L51
drawer in coach hide
2L52
drawer in coach hide
46 (18 1/8")
27 (10 5/8")
18 (7 1/8")
BOOKSHELVES
48
CM
247,00
CU
357,00
CM
328,00
CU
512,00
2Leather
cover: coach hide
steel
drawers: coach hide
with coach hide.
Examples of compositions.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
2LCM02
example of wall bookshelf
composed of:
4 x 2L15M
1 x 2L21P
150 (59 1/8")
30 (11 7/8")
122 (48 1/8")
CM
CU
6.354,00
2LCM03
example of wall-hung bookshelf composed of:
2 x 2L15M
2 x 2L15EF
200 (78 3/4")
CM
CU
3.602,00
CM
6.397,00
CU
8.182,00
CM
6.397,00
8.182,00
2LCM04
2 x 2L10M
2 x 2L15M
2 x 2L10EF
2 x 2L15EF
2LCM05
2 x 2L10M
2 x 2L15M
2 x 2L10EF
2 x 2L15EF
32 (12 5/8")
300 (118 1/4") 32 (12 5/8")
250 (98 1/2")
32 (12 5/8")
60 (23 5/8")
90 (35 1/2")
60 (23 5/8")
CU
8.324,00
4.587,00
BOOKSHELVES
49
Aretè
cover: coach hide with patented cutting
frame: chrome plated steel
padding: high density flexible polyurethane foam
seat: moulded rigid polyurethane foam
glides: plastic
base: swiveling, chrome plated steel
Small armchair and armchair in coach hide with patented cutting.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
AR02
swivel small armchair
60 (23 5/8")
54 (21 1/4")
81 (31 7/8")
46 (18 1/8")
D
CM
CU
1.574,00
1.752,00
AR10
armchair
72 (28 3/8")
64 (25 1/4")
82 (32 1/4")
44 (17 3/8")
D
CM
CU
1.607,00
1.875,00
AR12
swivel armchair
72 (28 3/8")
64 (25 1/4")
80 (31 1/2")
44 (17 3/8")
D
CM
CU
1.817,00
2.070,00
SMALL ARMCHAIRS
50
Britt
Design: T.Wise - 2008
cover: soft leather
frame: wood and steel
fibre - 30% PP (Polypropylene)
latex
legs and base: chrome plated steel
Padded small armchair covered with
soft leather.
width
cm (in)
depth
cm (in)
height
height
TT20
padded small armchair with steel legs
60 (23 5/8")
62 (24 3/8")
72 (28 3/8")
TT20/2
padded small sofa with steel legs
110 (43 1/4")
62 (24 3/8")
TT21
padded small armchair with steel base
60 (23 5/8")
TT21/2
padded small sofa with steel base
110 (43 1/4")
PRICE
VAT excl.
height
seat cm (in)
metal
finish
covers
61 (24")
40 (15 3/4")
D
PS/PF
PT/PL/PR
HQ
1.755,00
1.988,00
2.370,00
72 (28 3/8")
61 (24")
40 (15 3/4")
D
PS/PF
PT/PL/PR
HQ
2.543,00
2.900,00
3.477,00
62 (24 3/8")
72 (28 3/8")
61 (24")
40 (15 3/4")
D
PS/PF
PT/PL/PR
HQ
1.883,00
2.117,00
2.499,00
62 (24 3/8")
72 (28 3/8")
61 (24")
40 (15 3/4")
D
PS/PF
PT/PL/PR
HQ
2.641,00
2.997,00
3.582,00
SMALL ARMCHAIRS
51
Britt
Design: T.Wise - 2008
cover: soft leather
frame: wood and steel
100% cotton fibre
latex
legs and base: chrome plated steel
spider base: chrome plated steel
soft leather.
width
cm (in)
depth
cm (in)
height
height
TT30
padded small armchair with steel legs
60 (23 5/8")
62 (24 3/8")
78 (30 3/4")
TT31
60 (23 5/8")
62 (24 3/8")
60 (23 5/8")
60 (23 5/8")
TT34
padded small armchair with spider steel base
and swivel system
TT40
padded small armchair, on castors
metal
finish
covers
67 (26 3/8")
46 (18 1/8")
D
PS/PF
PT/PL/PR
HQ
1.768,00
2.001,00
2.382,00
78 (30 3/4")
67 (26 3/8")
46 (18 1/8")
D
PS/PF
PT/PL/PR
HQ
1.896,00
2.130,00
2.511,00
62 (24 3/8")
78 (30 3/4")
67 (26 3/8")
46 (18 1/8")
D
PS/PF
PT/PL/PR
HQ
1.993,00
2.237,00
2.637,00
62 (24 3/8")
78 (30 3/4")
67 (26 3/8")
46 (18 1/8")
D
PS/PF
PT/PL/PR
HQ
1.817,00
2.142,00
2.690,00
SMALL ARMCHAIRS
52
PRICE
VAT excl.
height
seat cm (in)
Coco Chair
Design: Eoos - 2003
cover: coach hide
frame: steel
padding: hight density flexible polyurethane foam
latex
This product complies with the fire
regulation in force "classe 1IM".
Small armchair entirely covered with
coach hide.
CC03
chair with armrests coach hide covered
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
59 (23 1/4")
53 (20 7/8")
80 (31 1/2")
46 (18 1/8")
65-68
(25 5/8"-26 3/4")
metal
finish
PRICE
VAT excl.
covers
CM
942,00
CU
1.331,00
Court
cover: soft leather
frame: steel
padding: moulded polyurethane foam
cushion: polyurethane foam with double-layer padding
latex
base: epoxy painted, chrome or nickel
plated tubular rod
glide: PVC
Padded small armchair with steel
base.
CO11
width
cm (in)
depth
cm (in)
height
height
61 (24")
57 (22 1/2")
70 (27 5/8")
70 (27 5/8")
PRICE
VAT excl.
height
seat cm (in)
metal
finish
covers
46 (18 1/8")
A/D
PS/PF
PT/PL/PR
HQ
1.438,00
1.633,00
1.953,00
M
PS/PF
PT/PL/PR
HQ
1.470,00
1.659,00
1.980,00
SMALL ARMCHAIRS
53
Derby
Design: Eoos - 2000
soft leather.
cover: soft leather
frame: rigid polyurethane foam with
metal inlay
padding: cold moulded polyurethane
latex
legs: round section ø 20 mm (3/4") in
chrome plated or aluminium grey epoxy
painted (A49) steel
castors: black polyamide ø 40 mm (15/8")
50 kg. (lb 110,23) load each, monodirectional, for soft floors (carpets, etc.)
A finish is available only in Aluminium
Grey A49.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
64 (25 1/4")
59 (23 1/4")
77 (30 3/8")
67 (26 3/8")
45 (17 3/4")
A/D
PS/PF
PT/PL/PR
HQ
1.810,00
2.005,00
2.325,00
DY02P
small armchair on feet entirely covered with 64 (25 1/4")
soft leather
59 (23 1/4")
77 (30 3/8")
67 (26 3/8")
45 (17 3/4")
A/D
PS/PF
PT/PL/PR
HQ
2.325,00
2.619,00
3.102,00
DY02R
small armchair on 2 back castors entirely 64 (25 1/4")
covered with soft leather
59 (23 1/4")
77 (30 3/8")
67 (26 3/8")
45 (17 3/4")
A/D
PS/PF
PT/PL/PR
HQ
2.247,00
2.540,00
3.024,00
DY01
small armchair
SMALL ARMCHAIRS
54
Elémentaire
Design: Jean Nouvel - 2004
cover: soft leather
frame: wood
densities with double-layer padding.
latex
glides: plastic
Padded small armchair and small
sofa covered with soft leather.
metal
finish
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
covers
EM31
armchair
70 (27 5/8")
80 (31 1/2")
83 (32 3/4")
66 (26")
45 (17 3/4")
PS/PF
PT/PL/PR
CS/HQ
2.461,00
2.945,00
3.727,00
EM32
small sofa
120 (47 1/4")
80 (31 1/2")
83 (32 3/4")
66 (26")
45 (17 3/4")
PS/PF
PT/PL/PR
CS/HQ
3.175,00
3.828,00
4.885,00
SMALL ARMCHAIRS
55
Esquire
Design: Luigi Massoni and
Giorgio Cazzaniga - 1989
cover: soft leather
frame: preformed wood and beech
bent plywood
latex
glides: adjustable-slip device, nickelplated pin, with rubber shock absorber
castors: black polyamide ø 40 mm (15/8")
25 kg. (lb 55,1) load each (for ES5)
Special sizes
upon request
Padded small armchair and small
sofa covered with soft leather.
height
seat cm (in)
depth
cm (in)
height
height
ES5
small armchair
71 (28")
66 (26")
82 (32 1/4")
65 (25 5/8")
48 (18 7/8")
PS/PF
PT/PL/PR
HQ
2.997,00
3.422,00
4.127,00
ES6
small sofa
120 (47 1/4")
66 (26")
82 (32 1/4")
65 (25 5/8")
48 (18 7/8")
PS/PF
PT/PL/PR
HQ
3.963,00
4.610,00
5.661,00
SMALL ARMCHAIRS
56
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
Kelly
Armchair upholstered and covered
with soft leather, with coach-hide
backrest and armrests.
KE31
small armchair
On demand, without any surcharge, it
is possible to completely cover the steel
supporting frame in coach-hide, having
the same finish of the shell.
cover: soft leather and coach-hide
base frame: steel
backrest and armrests: steel supporting frame with backrests and armrests
in coach hide doubled with stiff Nylon/
cotton fabric and polyurethane
base padding: polyurethane foam of
different densities
cushion padding: goose feather with
polyurethame foam inlay
belts: flat section in polypropylene
foam inlay
feet: chrome plated steel, gloss black
nichel plated or coach hide covered
depth
cm (in)
height
height
height
seat cm (in)
finiture
metalli
60 (23 5/8")
63 (24 7/8")
74 (29 1/8")
44 (17 3/8")
D/M02 CM
PS/PF
PT/PL/PR
HQ
2.157,00
2.239,00
2.373,00
CU
PS/PF
PT/PL/PR
HQ
2.456,00
2.538,00
2.673,00
65 (25 5/8")
SMALL ARMCHAIRS
finiture
metal
cuoio
finish
PRICE
VAT excl.
width
cm (in)
covers
SMALL ARMCHAIRS
57
Korium
Design: Tito Agnoli - 1978
padding: high density flexible polyurethane foam, rigid nylon/cotton backing
latex
Small armchairs and small sofa with
coach hide covered steel frame, cushions covered with soft leather.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
KM1
small armchair
64 (25 1/4")
55 (21 5/8")
86 (33 7/8")
47 (18 1/2")
KMC
small cushion in soft leather
42 (16 1/2")
48 (18 7/8")
6 (2 3/8")
KM2/1
small armchair with soft leather cushion
78 (30 3/4")
63 (24 7/8")
85 (33 1/2")
KM2/2
small sofa with soft leather cushions
128 (50 3/8")
63 (24 7/8")
85 (33 1/2")
66 (26")
63 (24 7/8")
63 (24 7/8")
43 (17")
43 (17")
SMALL ARMCHAIRS
58
metal
finish
covers
CM
CU
PRICE
VAT excl.
1.300,00
1.854,00
PS/PF
PT/PL/PR
230,00
282,00
CM +
PS/PF
CM +
PT/PL/PR
1.835,00
CU +
PS/PF
CU +
PT/PL/PR
2.452,00
CM +
PS/PF
CM +
PT/PL/PR
2.738,00
CU +
PS/PF
CU +
PT/PL/PR
3.483,00
1.892,00
2.509,00
2.852,00
3.597,00
MG
Design: Centro Studi - 1979
cover: coach hide
frame: round section tubular steel, epoxy
painted, chrome
Steel small armchairs with seat and
back in coach hide.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
PRICE
VAT excl.
MG5/AR
small armchair with tubular armrests, seat
and back in coach hide
56 (22 1/8")
56 (22 1/8")
80 (31 1/2")
45 (17 3/4")
A/D
CM
443,00
CU
570,00
MG5/B
small armchair with armrests, seat and back
in coach hide
61 (24")
CM
465,00
CU
596,00
MG6/AR
small armchair with tubular armrests, one
piece seat and back in coach hide
56 (22 1/8")
CM
490,00
CU
612,00
MG6/B
small armchair with armrests, one piece seat
and back in coach hide
61 (24")
CM
522,00
CU
654,00
56 (22 1/8")
56 (22 1/8")
56 (22 1/8")
80 (31 1/2")
80 (31 1/2")
80 (31 1/2")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
45 (17 3/4")
45 (17 3/4")
45 (17 3/4")
A/D
A/D
A/D
SMALL ARMCHAIRS
59
Carol GR
cover: coach hide
padding: high density flexible polyurethane foam
base: 5 star base in die cast aluminium with polished
finish
mechanism: adjustable or tilting mechanism (tilting
with locking device in 5 positions for CR6GRTB), gas
cylinder with taper ø 28 mm (11/8") swivel or back returning pipe ø 21 mm (7/8")
castors: revolving castors in black polyamide ø 50 mm
(2"), 50 kg. (lb 110,23) load each, suitable for soft floors
(carpets, etc.)
Castors and glides
upon request we can deliver glides or the
following types of castors: (excluded version
GRR):
1. no-slip
2. self-braking
3. no-slip and self-braking
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
CR5AGRF
small armchair with aluminium base, fixed
seat height
58 (22 7/8")
57 (22 1/2")
77 (30 3/8")
44 (17 3/8")
CR5AGRR
small armchair on glides with aluminium
base, fixed seat height and back returning
mechanism
58 (22 7/8")
CR5AGR
small armchair with aluminium base, adjustable seat height
58 (22 7/8")
CR5AGRT
small armchair with aluminium base, adjustable height and tilting seat
58 (22 7/8")
CR6AGRF
small armchair with aluminium base, fixed
seat height
58 (22 7/8")
CR6AGRR
small armchair on glides with aluminium
base, fixed seat height and back returning
mechanism
58 (22 7/8")
CR6AGR
small armchair with aluminium base, adjustable seat height
58 (22 7/8")
CR6AGRTB
small armchair with aluminium base, adjustable height and tilting seat with locking
device in 5 positions
58 (22 7/8")
Design: Carlo Bartoli - 1987
Swivel small armchairs in steel entirely covered with coach hide.
57 (22 1/2")
57 (22 1/2")
57 (22 1/2")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
76 (30")
62 (24 3/8")
61 (24")
43 (17")
PRICE
VAT excl.
CM
1.667,00
CU
1.967,00
CM
1.705,00
CU
2.005,00
CM
1.725,00
(30 3/8" - 34 1/4") (24 3/8" - 28 3/8") (17 3/8" - 21 1/4")
CU
2.025,00
76/83
CM
1.732,00
CU
2.032,00
CM
1.888,00
CU
2.266,00
CM
1.934,00
CU
2.313,00
77/87
(30" - 32 3/4")
90 (35 1/2")
89 (35 1/8")
62/72
61/68
(24" - 26 3/4")
62 (24 3/8")
61 (24")
44/54
43/50
(17" - 19 3/4")
44 (17 3/8")
43 (17")
CM
1.960,00
(35 1/2" - 39 3/8") (24 3/8" - 28 3/8") (17 3/8" - 21 1/4")
CU
2.339,00
89/96
CM
1.992,00
CU
2.370,00
90/100
62/72
61/68
(35 1/8" - 37 7/8") (24" - 26 3/4")
44/54
43/50
(17" - 19 3/4")
WORK SEATS
60
covers
Carol GR
Swivel armchairs in steel with coach hide covered seat, back and
armrests, cushions covered with
soft leather.
CR9AGRT
armchair with aluminium base, adjustable
height and tilting seat
CR9AGRS
seat height and reclinable back
CR10AGRT
CR10AGRS
padding: polyurethane foam of different densities with
double-layer padding
finish
mechanism: adjustable or tilting mechanism, gas cylinder with taper ø 28 mm (11/8") swivel or back returning
pipe ø 21 mm (7/8")
(carpets, etc.)
glides: black polyamide molded
Castors and glides
following types of castors:
1. no-slip
2. self-braking
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
66 (26")
65 (25 5/8")
88/95
45/52
66 (26")
66 (26")
66 (26")
59/68
60/67
(34 5/8" - 37 3/8") (23 5/8" - 26 3/8") (17 3/4" - 20 1/2")
88/95
57/64
44/51
(23 1/4" - 26 3/4") (34 5/8" - 37 3/8") (22 1/2" - 25 1/4") (17 3/8" - 20 1/8")
69 (27 1/8")
63/78
102/109
(40 1/4" - 43")
102/109
(24 7/8" - 30 3/4") (40 1/4" - 43")
60/67
45/52
(23 5/8" - 26 3/8") (17 3/4" - 20 1/2")
57/64
44/51
(22 1/2" - 25 1/4") (17 3/8" - 20 1/8")
covers
PRICE
VAT excl.
CM+PS/PF
CM+PT/PL/PR
2.967,00
3.120,00
CU+PS/PF
CU+PT/PL/PR
3.295,00
3.448,00
CM+PS/PF
CM+PT/PL/PR
3.323,00
3.476,00
CU+PS/PF
CU+PT/PL/PR
3.651,00
3.804,00
CM+PS/PF
CM+PT/PL/PR
3.281,00
3.469,00
CU+PS/PF
CU+PT/PL/PR
3.651,00
3.839,00
CM+PS/PF
3.651,00
CM+PT/PL/PR
3.839,00
CU+PS/PF
CU+PT/PL/PR
4.020,00
4.209,00
WORK SEATS
61
Carol GR
Swivel armchairs in steel with coach
hide covered seat, back and armrests, cushions covered with soft
leather.
CR11AGRT
CR11AGRS
padding: polyurethane foam of different densities with
double-layer padding
finish
mechanism: adjustable or tilting mechanism, gas cylinder with taper ø 28 mm (11/8") swivel or back returning
pipe ø 21 mm (7/8")
(carpets, etc.)
glides: black polyamide molded
Castors and glides
1. no-slip
2. self-braking
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
66 (26")
61 (24")
112/119
45/52
60/67
(44 1/8" - 46 7/8") (23 5/8" - 26 3/8") (17 3/4" - 20 1/2")
66 (26")
55/78
112/119
57/64
44/51
(21 5/8" - 30 3/4") (44 1/8" - 46 7/8") (22 1/2" - 25 1/4") (17 3/8" - 20 1/8")
WORK SEATS
62
covers
PRICE
VAT excl.
CM+PS/PF
CM+PT/PL/PR
3.420,00
CU+PS/PF
CU+PT/PL/PR
3.818,00
4.027,00
CM+PS/PF
CM+PT/PL/PR
3.790,00
3.999,00
CU+PS/PF
CU+PT/PL/PR
4.188,00
4.397,00
3.629,00
Carol
frame: oval section tubular steel, epoxy
painted or chrome plated
latex
glide: black polyamide moulded
Small armchairs with exposed steel
frame or covered with coach hide,
seat and back in coach hide, cushions
in soft leather.
CR7
small armchair with exposed frame and
armrests covered with coach hide
CR8
small armchair with coach hide covered
frame
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
59 (23 1/4")
62 (24 3/8")
84 (33 1/8")
47 (18 1/2")
A
D
CM+PS/PF
CM+PS/PF
2.364,00
2.404,00
A
D
CM+PT/PL/PR
CM+PT/PL/PR
2.469,00
2.514,00
A
D
CU+PS/PF
CU+PS/PF
2.632,00
2.671,00
A
D
CU+PT/PL/PR
CU+PT/PL/PR
2.737,00
2.782,00
CM+PS/PF
CM+PT/PL/PR
2.313,00
2.424,00
CU+PS/PF
CU+PT/PL/PR
2.691,00
2.802,00
61 (24")
64 (25 1/4")
86 (33 7/8")
63 (24 7/8")
63 (24 7/8")
47 (18 1/2")
WORK SEATS
63
Kompass
Design: Eoos 2010
cover: soft leather or fabric
internal frame: acciaio pressopiegato
struttura a vista : black epoxi-painted press-formed steel
padding: cold moulded polyurethane foam
armrest: frame in rigid polyurethane foam covered with leather and
fabric
pivoting board for armrest: rigid polyurethane foam with black
varnished die cast aluminium joint, safety push closing system
technical prearrangement: armrests are prearranged to install
simoultaneous translation equipment and polling systems.
This product can be covered with our
standard fabrics and leathers or with
customer owned materials.
This product, if covered with soft leather PF, complies with the italian fire
regulations in force "classe 1IM".
Upon request, it can comply with
CAL117, BS5852 o M2 standards
width
cm (in)
metal
finish
The price is given upon specific request
Floor-fixed seating covered with
soft leather or fabric.
56 [22 1/8"]
depth
cm (in)
height
height
height
seat cm (in)
PRICE
VAT excl.
covers
56 [22 1/8"]
47 [18 1/2"]
24.5 [9 5/8"]
20.5 [8 1/8"]
35.5 [14"]
67.5 [26 5/8"]
65.5 [25 7/8"]
45 [17 3/4"]
67 [26 1/2"]
89 [35"]
63.5 [25"]
26.5 [10 1/2"]
51 [20 1/8"]
90 [35 1/2"]
38 [15"]
90 [35 1/2"]
30.5 [11 7/8"]
24.5 [9 3/4"]
65.5 [25 7/8"]
49.5 [19 3/8"]
33.5 [13 1/4"]
90 [35
38 [15"]
90 [35 1/2"]
24.5 [9 5/8"]
1/2"]
RAGGIO MINIMO
R.600 [236 3/8"]
WORK SEATS
64
WORK SEATS
Kompass
fabric
width
cm (in)
depth
cm (in)
metal
finish
KS56MODU
seduta modulo singolo
47 (18 1/2")
65.5 (25 7/8") 89 (35")
KSB0TPDX / KSB0TPSX
bracciolo terminale destro o sinistro
7.5 (2 7/8")
26.5 (10 1/2") 67 (26 1/2")
KSB0TPDE / KSB0TPSE
bracciolo terminale destro o sinistro
elettrificato
7.5 (2 7/8")
26.5 (10 1/2") 67 (26 1/2")
KSB0TNDX / KSB0TNSX
bracciolo terminale destro o sinistro con
numerazione fila
7.5 (2 7/8")
26.5 (10 1/2") 67 (26 1/2")
KSB0TNSE
bracciolo terminale con numerazione fila
elettrificato
7.5 (2 7/8")
26.5 (10 1/2") 67 (26 1/2")
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
Design: Eoos 2010
Floor-fixed seating covered with soft
leather or fabric.
KSB0TPST
bracciolo terminale sinistro con tavoletta
height
height
height
seat cm (in)
covers
PRICE
VAT excl.
45 (17 3/4")
WORK SEATS
WORK SEATS
65
Kompass
fabric
width
cm (in)
depth
cm (in)
metal
finish
KSB0TESE
bracciolo terminale sinistro con tavoletta
elettrificato
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
KSB0TNST
bracciolo terminale sinistro con tavoletta e
numerazione fila
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
KSB0TSST
bracciolo terminale sinistro con numerazione fila con tavoletta elettrificato
7.5 (2 7/8")
26.5 (10 1/2") 67 (26 1/2")
KSB0CENT
bracciolo centrale
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
KSB0CEEL
bracciolo centrale elettrificato
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
KSB0CETA
bracciolo centrale con tavoletta
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
Design: Eoos 2010
Floor-fixed seating covered with
soft leather or fabric.
height
height
height
seat cm (in)
PRICE
VAT excl.
WORK SEATS
WORK SEATS
66
covers
Kompass
fabric
width
cm (in)
depth
cm (in)
metal
finish
KSB0CEET
bracciolo centrale con tavoletta
elettrificato
7.5 (2 7/8")
30.5 (11 7/8") 67 (26 1/2")
KSBCCENT
bracciolo centrale per curva
variabile
26.5 (10 1/2") 67 (26 1/2")
KSBCCEEL
bracciolo centrale per curva elettrificato
variabile
30.5 (11 7/8") 67 (26 1/2")
KSBCCETA
bracciolo centrale per curva con tavoletta
variabile
26.5 (10 1/2") 67 (26 1/2")
KSBCCEET
bracciolo centrale per curva con tavoletta
elettrificato
variabile
30.5 (11 7/8") 67 (26 1/2")
Design: Eoos 2010
The price is given upon specific request.
Floor-fixed seating covered with soft
leather or fabric.
height
height
height
seat cm (in)
covers
PRICE
VAT excl.
KS00NUME
elemento numerazione posto
KSLUCO
elemento luce cortesia
WORK SEATS
WORK SEATS
67
Kube
covers: soft leather or fabric
frame: black epoxy painted steel
legs: aluminium grey epoxy painted steel,
with two different inclinations
tilting board for seat back: medium
density embossed black or aluminium
grey; external steel frame covered with
soft leather or fabric or epoxy painted;
supporting brackets in epoxy painted die
cast aluminium, safety push closing system;
max. loading capacity 30 kg.
armrest: die cast aluminium covered
with soft leather or fabric
Design: Eoos - 2002
Engineering: Studio Ugolini
Compasso d'Oro ADI award
Guide to the drawing up of the
order.
width
cm (in)
depth
cm (in)
pivoting board for armrest: board
and pivot in epoxy painted aluminium;
seat back panel: chipboard panel
covered with soft leather or fabric, in
epoxy painted steel or veneered chipboard panel
technical equipments: armrests and
seat back panels can be prearranged to install simultaneous translation equipments
and/or polling systems
height
height
The price is given upon specific
request.
height
seat cm (in)
metal
finish
covers
PRICE
VAT excl.
Seating system on beams; seating units from 1 to 5 seats with two different interaxial distances of the seat, 560 mm (22 1/8") or 630 mm (24 7/8"). Seating groups: with left or
right end unit, with both end units, without end units (central seating units). Both seats and legs can have different inclinations ( seat/seat back and seat back/floor), in order
to be adapted to different purposes.
71/78 (28" - 30 3/4")
183/204 (72 1/8" - 80 3/8")
127/141 (50" - 55 1/2")
seating with both end units
112/126 (44 1/8" - 49 5/8")
56/63 (22 1/8" - 24 7/8")
239/267 (94 1/8" - 105 1/4")
290/330 (114 1/4" - 130")
112/126 (44 1/8" - 49 5/8")
seating with left or right end
unit
112/126 (44 1/8" - 49 5/8") 112/126 (44 1/8" - 49 5/8")
seating without end
units
Example for drawing up an order according to the solution shown below (see pages 56 - 60 for main elements and accessories):
no.1 KB54SX no.1KB54CE no.1 KB54DX
n°1 KB54CE
n° 1 KB54SX
n° 1 KB54DX
Plan and examples of different arrangements.
90 (35 1/2")
53,5 (21 1/8")
R1200 (472 3/4")
Curve solution: minimum
radius required
56/63 (22 1/8" - 24 7/8")
WORK SEATS
68
Kube
Design: Eoos - 2002
order.
width
cm (in)
depth
cm (in)
request.
height
height
height
seat cm (in)
metal
finish
PRICE
VAT excl.
covers
Side view and dimensions; examples of the different arrangements for flat floors, steps or sloping floors.
36,5 (14 3/8")
90 (35 1/2")
53,5 (21 1/8")
26 (10 1/4")
73 (28 3/4")
64 (25 1/4")
91,4 (36")
77 (30 3/8")
45 (17 3/4")
27 (10 5/8")
Some examples of customized solutions:
Assembling on stocking rails
Wall-hung system
Maximum height advised for steps when
seat back tilting board is required: cm 5 (2")
WORK SEATS
69
Kube
Design: Eoos - 2002
Floor-fixed seating system on beams
covered with soft leather or fabric.
Seat interaxial distance 560 mm
request.
(22 1/8")
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
KB51UN
single seating unit with end units, seat back
panel covered, or in epoxy painted steel,
or in wood
71 (28")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB51DX/KB51SX
single seating unit with left or right end unit,
seat back panel covered, or in epoxy painted
steel, or in wood
63,5 (25")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB51CE
single central seating unit, seat back panel
covered, or in epoxy painted steel, or in
wood
56 (22 1/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB52UN
2 seater unit with end units, seat back
or in wood
127 (50")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB52DX/KB52SX
2 seater unit with left or right end unit, seat
back panel covered, or in epoxy painted
steel, or in wood
119,5 (47 1/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB52CE
2 central seater unit, seat back panel covered, or in epoxy painted steel, or in wood
112 (44 1/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB53UN
or in wood
183 (72 1/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB53DX/KB53SX
steel, or in wood
175,5 (69 1/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB53CE
168 (66 1/4")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
70 (27 5/8")
WORK SEATS
70
This product can be covered with
our standard fabrics or leathers or
with customer owned materials.
This product, if covered with soft
leather PF, complies with the fire
Upon request, it can comply
with CAL117, BS5852 or M2
standards.
metal
finish
covers
PRICE
VAT excl.
Kube
Design: Eoos - 2002
request.
(22 1/8")
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
KB54UN
or in wood
239 (94 1/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB54DX/KB54SX
steel, or in wood
231,5 (91 1/4") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB54CE
224 (88 1/4")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
295 (116 1/4") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB55UN
or in wood
KB55DX/KB55SX
steel, or in wood
287,5
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB55CE
280 (110 3/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
(113 1/4")
standards.
metal
finish
covers
PRICE
VAT excl.
SEAT BACK ACCESSORIES
KB50TP
tilting board covered or epoxy painted, 56 (22 1/8")
lower panel epoxy painted or covered
51 (20 1/8")
2 (0 3/4")
KB50PO
object holder unit in fabric or leather, black
epoxy painted frame
22 (8 5/8")
1 (0 3/8")
55 (21 5/8")
WORK SEATS
71
Kube
Design: Eoos - 2002
request.
(24 7/8")
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
KB61UN
single seating unit with end units, seat back
or in wood
78 (30 3/4")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB61DX/KB61SX
single seating unit with left or right end unit,
seat back panel covered, or in epoxy painted
steel, or in wood
70,5 (27 3/4") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB61CE
single central seating unit, seat back panel
covered, or in epoxy painted steel, or in
wood
63 (24 7/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB62UN
or in wood
141 (55 1/2")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB62DX/KB62SX
steel, or in wood
133,5 (52 5/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB62CE
126 (49 5/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB63UN
or in wood
204 (80 3/8")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB63DX/KB63SX
steel, or in wood
196,5 (77 3/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB63CE
189 (74 1/2")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
70 (27 5/8")
WORK SEATS
72
standards.
metal
finish
covers
PRICE
VAT excl.
Kube
Design: Eoos - 2002
request.
(24 7/8")
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
KB64UN
or in wood
267 (105 1/4") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB64DX/KB64SX
steel, or in wood
259,5
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB64CE
252 (99 1/4")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
330 (130")
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB65DX/KB65SX
steel, or in wood
322,5
70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB65CE
315 (124 1/8") 70 (27 5/8")
91,4 (36")
67 (26 3/8")
45 (17 3/4")
KB60TP
tilting board covered or epoxy painted,
lower panel epoxy painted or covered
63 (24 7/8")
51 (20 1/8")
2 (0 3/4")
KB60PO
object holder unit in fabric or leather, black
epoxy painted frame
62 (24 3/8")
22 (8 5/8")
1 (0 3/8")
KB65UN
or in wood
(102 1/4")
(127 1/8")
standards.
metal
finish
covers
PRICE
VAT excl.
SEAT BACK ACCESSORIES
WORK SEATS
73
Kube
Design: Eoos - 2002
width
cm (in)
depth
cm (in)
KB00TB
pivoting board for armrest
24,8 (9 3/4")
27,2 (10 3/4") 9,5 (3 3/4")
KB00LD/KB00LS
left or right end unit with row lighting
8 (3 1/8")
26 (10 1/4")
height
height
request.
height
seat cm (in)
53 (20 7/8")
KB00BT
armrest simultaneous translation equipment
mod. Philips LBB 3524
KB00ST
seat back simultaneous translation equipment mod. Philips LBB 3524
KB00BV
armrest polling systems mod. Philips LBB
3541
KB00SV
seat back polling systems mod. Philips
LBB 3541
KB00SP
seat numbering element
KB00EB
beam light
KB00ET
transformer
WORK SEATS
74
standards.
metal
finish
covers
PRICE
VAT excl.
Meeting
cover: coach hide, soft leather or fabric
frame: epoxy painted special section extruded drawn
aluminium
bases: epoxy painted die cast aluminium
armrests: epoxy painted die cast aluminium
supports: epoxy painted die cast aluminium
seating unit: oval section drawn steel covered with coach hide/soft leather or in perforated aluminium sheet
padding: high density flexible polyurethane foam with
rigid nylon/cotton backing
glides: black plastic moulded, adjustable and with
rubber shock absorber
low table top: marble 20 mm (3/4") thickness, polyester
polished finish
Special sizes
upon request
EXAMPLES
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
CMT3C
2 coach hide seater solution with low
table
200 (78 3/4")
63 (24 7/8")
77 (30 3/8")
42 (16 1/2")
A
CM
CU
3.889,00
CMT4C
4 coach hide seater solution
263 (103 5/8") 63 (24 7/8")
CM
5.476,00
CU
6.749,00
Design: Centro Studi - 1991/99
Multiple seating solutions.
Seating system on beam. Seating
units in steel covered with coach
hide/soft leather or aluminium sheet. Convenience tops can replace
seating units.
77 (30 3/8")
59 (23 1/4")
59 (23 1/4")
42 (16 1/2")
Solutions below are considered with
painted armrests and white marble
Bianco Carrara marble tops.
'Meeting' model is shipped knockeddown.
A
CMT4A
4 aluminium seater solution
263 (103 5/8") 59 (23 1/4")
77 (30 3/8")
59 (23 1/4")
41 (16 1/8")
A
CMT5A/SC
4 aluminium seater solution with cushions
in coach hide and low tables
314 (123 3/4") 62 (24 3/8")
79 (31 1/8")
59 (23 1/4")
43 (17")
A
CMT7C
5 coach hide seater solution with corner
low table
288/224
(113 1/2" - 88 1/4")
63 (24 7/8")
77 (30 3/8")
59 (23 1/4")
42 (16 1/2")
A
PRICE
VAT excl.
4.525,00
3.586,00
CM
5.827,00
CU
6.667,00
CM
9.142,00
CU
10.733,00
WORK SEATS
75
Meeting
seating units.
frame: epoxy painted special section
extruded drawn aluminium
bases: epoxy painted die cast aluminium
glides: black plastic moulded, adjustable
and with rubber shock absorber
armrests: epoxy painted die cast
aluminium
central and end element: epoxy painted special section extruded aluminium
This product, if covered with soft leather PF, coach hide CM, CT or CU,
complies with the fire regulation in force
"classe 1IM".
CAL117, BS5852 or M2 standards.
width
cm (in)
ELEMENTS
Special sizes
upon request
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
PRICE
VAT excl.
60 cm (23 5/8")
30 cm (11 7/8")
MT2
beam for 2 seats with bases
114 (44 7/8")
3,5 (1 3/8")
9 (3 1/2")
A
1.010,00
MT3
178 (69,9")
3,5 (1 3/8")
9 (3 1/2")
A
1.148,00
MT4
241 (94,9")
3,5 (1 3/8")
9 (3 1/2")
A
1.264,00
MT5
305 (120")
3,5 (1 3/8")
9 (3 1/2")
A
1.480,00
28 cm (11")
MT18
beam with base for corner top MT18N
- MT18B
68 (26 3/4")
68 (26 3/4")
9 (3 1/2")
A
1.031,00
MT16
junction element for "back to back" seating
units
96 (37 7/8")
4 (1 5/8")
14 (5 1/2")
A
123,00
4 (1 5/8")
39 (15 3/8")
43 (17")
A
103,00
MTB/ET
side end armrest with end element for
straight bars
11 (4 3/8")
39 (15 3/8")
43 (17")
A
218,00
MT/EC
central element for straight bars connection
14 (5 1/2")
3,5 (1 3/8")
9 (3 1/2")
A
151,00
MTB1A
armrest
WORK SEATS
76
Meeting
seating units.
seating unit: oval section drawn steel
covered with coach hide/leather or in
perforated aluminium sheet (MT1A)
seat padding: high density flexible
polyurethane foam with rigid nylon/
cotton backing
set cushions padding: high density
flexible polyurethane foam with steel
sheet backing
headrest cushion padding: cold molded polyurethane foam with steel plate
insert backing
ELEMENTS
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
MT1A
seating unit in perforated aluminium sheet
58 (22 7/8")
60 (23 5/8")
60 (23 5/8")
39 (15 3/8")
A
MT1ACC
with coach hide cushions
58 (22 7/8")
62 (24 3/8")
61 (24")
41 (16 1/8")
A
MT1ACP
with soft leather cushions
58 (22 7/8")
62 (24 3/8")
61 (24")
41 (16 1/8")
A
PS/PF
PT/PL/PR
MT1
seating unit in coach hide
59 (23 1/4")
62 (24 3/8")
60 (23 5/8")
41 (16 1/8")
A
CM
CU
868,00
1.186,00
MT17
high back seating unit in coach hide
59 (23 1/4")
72 (28 3/8")
91 (35 7/8")
41 (16 1/8")
A
CM
CU
1.098,00
1.579,00
MT17RCL
reclinable seating unit in coach hide
59 (23 1/4")
86 (33 7/8")
82 (32 1/4")
41 (16 1/8")
A
CM
CU
1.118,00
1.592,00
Special sizes
upon request
"classe 1IM".
The reclinable seating unit can be used
only with "back to back" solution together with the junction element MT16.
covers
PRICE
VAT excl.
395,00
CM
807,00
CU
1.017,00
787,00
861,00
WORK SEATS
77
Meeting
footrest: oval section drawn steel covered with coach hide/leather
padding: high density flexible polyurethane foam with rigid nylon/cotton backing
footrest support: epoxy painted steel
cushions padding: high density polyurethane foam
seating units.
ELEMENTS
width
cm (in)
depth
cm (in)
height
height
MT17CP
headrest cushion covered in soft leather for
MT17 and MT17RCL
49 (19 1/4")
2 (7/8")
12 (4 3/4")
MT20RCL
footrest covered in coach hide for
MT17RCL
59 (23 1/4")
79 (31 1/8")
26 (10 1/4")
height
seat cm (in)
WORK SEATS
78
metal
finish
A
covers
PRICE
VAT excl.
PS/PF
112,00
CM
846,00
CU
907,00
Meeting
low table top: marble 20 mm (3/4") thickness, polyester polished finish
under top frame: black painted veneered plywood
Special sizes
upon request
This product, if covered with soft leather PF , coach hide CM, CT or CU,
"classe 1IM".
seating units.
covers
PRICE
VAT excl.
ELEMENTS
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
MT9
convenience top in white marble Bianco
Carrara
58 (22 7/8")
58 (22 7/8")
23 (9")
tavolo
40 (15 3/4")
A
366,00
MT8
convenience top in black marble Marquinia
58 (22 7/8")
58 (22 7/8")
23 (9")
tavolo
40 (15 3/4")
A
458,00
MT11
Carrara
58 (22 7/8")
23 (9")
tavolo
40 (15 3/4")
A
366,00
MT10
58 (22 7/8")
23 (9")
tavolo
40 (15 3/4")
A
458,00
MT18B
convenience corner top in white marble
Bianco Carrara
77 (30 3/8")
77 (30 3/8")
23 (9")
tavolo
40 (15 3/4")
A
669,00
MT18N
convenience corner top in black marble
Marquinia
77 (30 3/8")
77 (30 3/8")
23 (9")
tavolo
40 (15 3/4")
A
727,00
MT19B
Carrara
58 (22 7/8")
28 (11")
23 (9")
tavolo
40 (15 3/4")
A
304,00
MT19N
58 (22 7/8")
28 (11")
23 (9")
tavolo
40 (15 3/4")
A
375,00
WORK SEATS
79
Mizar
cover: coach hide, coach hide and fabric, coach hide and soft leather
shell: oval section drawn steel
shell padding: high density flexible polyurethane foam supported by
rigid nylon/cotton backing and flat-section in polypropylene and latex
belts for seating, with cushion
cushion padding: moulded polyurethane foam
base: 5 star base in die cast aluminium with polished finish
shell support: 5 star base in die cast aluminium with polished finish
or chrome plated
mechanism: adjustable/tilting mechanism, gas cylinder with taper ø
28 mm (1 1/8")
castors: revolving castors in black polyamide ø 50 mm (2"), 50 kg. (lb
110,23) load each, suitable for soft floors (carpets, etc.)
armrests: die cast aluminium, polished finish or coach hide covered
Castors and glides
1. no-slip - 2. self-braking - 3. no-slip and
self-braking
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
MZ04CAGRT
56 (22 1/8")
57 (22 1/2")
79/86
43/50
L
MZ04TAGRT
small armchair with aluminium base, adjustable height and tilting seat and cushions
in fabric
56 (22 1/8")
MZ04PAGRT
in soft leather
56 (22 1/8")
MZ05CAGRT
56 (22 1/8")
MZ05TAGRT
in fabric
56 (22 1/8")
MZ05PAGRT
in soft leather
56 (22 1/8")
Design: T.Wise Eng. - 1998
Swivel small armchairs in steel, shell
covered with coach hide, available
also with cushions covered in fabric
or soft leather.
61 (24")
61 (24")
60 (23 5/8")
65 (25 5/8")
65 (25 5/8")
61/68
(31 1/8" - 33 7/8") (24" - 26 3/4")
79/86
61/68
(31 1/8" - 33 7/8") (24" - 26 3/4")
79/86
61/68
(31 1/8" - 33 7/8") (24" - 26 3/4")
89/96
61/68
(35 1/8" - 37 7/8") (24" - 26 3/4")
89/96
61/68
(35 1/8" - 37 7/8") (24" - 26 3/4")
89/96
61/68
(35 1/8" - 37 7/8") (24" - 26 3/4")
(17" - 19 3/4")
43/50
L
(17" - 19 3/4")
43/50
(17" - 19 3/4")
43/50
(17" - 19 3/4")
43/50
L
L
L
(17" - 19 3/4")
43/50
(17" - 19 3/4")
WORK SEATS
80
"classe 1IM".
Extra charge for chrome plated finish
Euro 228,00 VAT excl.
Extra charge for one pair of armrests
covered with CM/CT/CU: Euro 149,00
VAT excl.
L
covers
PRICE
VAT excl.
CM
1.331,00
CU
1.533,00
CM+G
1.663,00
CU+G
1.780,00
CM+PS/PF
1.763,00
CU+PS/PF
1.888,00
CM
1.379,00
CU
1.602,00
CM+G
1.724,00
CU+G
1.854,00
CM+PS/PF
1.829,00
CU+PS/PF
1.967,00
Mizar
shell support: die cast aluminium with polished finish or chrome
plated
base: 5 star base in die cast aluminium with polished finish or chrome
plated
mechanism: reclinable back, gas cylinder with taper ø 28 mm (1 1/8")
castors: revolving castors in black polyamide ø 50 mm (2"), 50 kg (lb
armrests: die cast aluminium, polished, chrome plated or coach hide
covered
Castors and glides
following types of castors(excluded version
GRR):
1. no-slip - 2. self-braking - 3. no-slip and selfbraking
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
MZ04CAGRF
small armchair with base and shell support
in aluminium, fixed seat height
56 (22 1/8")
57 (22 1/2")
83 (32 3/4")
62 (24 3/8")
43 (17")
L
CM
CU
1.263,00
1.465,00
MZ04CAGRR
small armchair with base (on glides)and shell
support in aluminium, fixed seat height and
back returning mechanism
56 (22 1/8")
57 (22 1/2")
82 (32 1/4")
61 (24")
42 (16 1/2")
L
CM
CU
1.293,00
1.497,00
MZ04CAGR
in aluminium, adjustable seat height
56 (22 1/8")
57 (22 1/2")
83/90
62/69
43/50
L
CM
CU
1.312,00
1.515,00
MZ04TAGRF
in aluminium, fixed seat height and cushions
in fabric
56 (22 1/8")
61 (24")
83 (32 3/4")
62 (24 3/8")
43 (17")
L
CM+G
CU+G
1.602,00
1.717,00
MZ04TAGRR
support in aluminium, fixed seat height , back
returning mechanism, cushions in fabric
56 (22 1/8")
61 (24")
82 (32 1/4")
61 (24")
42 (16 1/2")
L
CM+G
CU+G
1.626,00
1.742,00
MZ04TAGR
in aluminium, adjustable seat height and
cushions in fabric
56 (22 1/8")
61 (24")
83/90
62/69
43/50
L
CM+G
CU+G
1.644,00
1.761,00
56 (22 1/8")
61 (24")
83/90
62/69
43/50
L
CM+G
CU+G
2.149,00
2.265,00
also with cushions in fabric or soft
leather.
MZ04TAGRS
in aluminium, adjustable seat height, reclinable back, height adjustable lumbar support
and cushions in fabric
(32 3/4" - 35 1/2") (24 3/8" - 27 1/8") (17" - 19 3/4")
(32 3/4" - 35 1/2") (24 3/8" - 27 1/8") (17" - 19 3/4")
(32 3/4" - 35 1/2") (24 3/8" - 27 1/8") (17" - 19 3/4")
PRICE
VAT excl.
WORK SEATS
81
Mizar
leather.
MZ04PAGRF
in soft leather
MZ04PAGRR
small armchair with base (on glides)and
shell support in aluminium, fixed seat height,
back returning mechanism, cushions in soft
leather
MZ04PAGR
cushions in soft leather
MZ04PAGRS
and cushions in soft leather
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
56 (22 1/8")
61 (24")
83 (32 3/4")
43 (17")
L
CM+PS/PF
1.698,00
CU+PS/PF
1.823,00
CM+PS/PF
1.725,00
CU+PS/PF
1.848,00
56 (22 1/8")
56 (22 1/8")
56 (22 1/8")
61 (24")
61 (24")
61 (24")
82 (32 1/4")
83/90
62 (24 3/8")
61 (24")
62/69
42 (16 1/2")
43/50
L
(32 3/4" - 35 1/2") (24 3/8" - 27 1/8") (17" - 19 3/4")
83/90
62/69
43/50
(32 3/4" - 35 1/2") (24 3/8" - 27 1/8") (17" - 19 3/4")
WORK SEATS
82
L
L
PRICE
VAT excl.
CM+PS/PF
1.745,00
CU+PS/PF
1.868,00
CM+PS/PF
2.280,00
CU+PS/PF
2.404,00
Mizar
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
MZ05CAGRF
in aluminium, fixed seat height
56 (22 1/8")
60 (23 5/8")
93 (36 5/8")
62 (24 3/8")
43 (17")
L
CM
CU
1.318,00
1.539,00
MZ05CAGRR
support in aluminium, fixed seat height and
back returning mechanism
56 (22 1/8")
60 (23 5/8")
92 (36 1/4")
61 (24")
42 (16 1/2")
L
CM
CU
1.342,00
1.565,00
MZ05CAGR
in aluminium, adjustable seat height
56 (22 1/8")
60 (23 5/8")
93/100
62/69
43/50
L
CM
CU
1.361,00
1.583,00
MZ05TAGRF
in fabric
56 (22 1/8")
63 (24 7/8")
93 (36 5/8")
62 (24 3/8")
43 (17")
L
CM+G
CU+G
1.663,00
1.792,00
MZ05TAGRR
56 (22 1/8")
63 (24 7/8")
92 (36 1/4")
61 (24")
42 (16 1/2")
L
CM+G
CU+G
1.687,00
1.817,00
MZ05TAGR
cushions in fabric
56 (22 1/8")
63 (24 7/8")
93/100
62/69
43/50
L
CM+G
CU+G
1.705,00
1.835,00
56 (22 1/8")
63 (24 7/8")
93/100
62/69
43/50
L
CM+G
CU+G
2.211,00
2.340,00
Swivel small armchair with shell covered with coach hide and cushions
in fabric or soft leather.
MZ05TAGRS
(36 5/8" - 39 3/8") (24 3/8" - 27 1/8") (17" - 19 3/4")
(36 5/8" - 39 3/8") (24 3/8" - 27 1/8") (17" - 19 3/4")
(36 5/8" - 39 3/8") (24 3/8" - 27 1/8") (17" - 19 3/4")
PRICE
VAT excl.
WORK SEATS
83
Mizar
leather.
MZ05PAGRF
in soft leather
MZ05PAGRR
leather
MZ05PAGR
MZ05PAGRS
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
56 (22 1/8")
63 (24 7/8")
93 (36 5/8")
62 (24 3/8")
43 (17")
L
CM+PS/PF
CU+PS/PF
1.763,00
1.902,00
56 (22 1/8")
63 (24 7/8")
92 (36 1/4")
61 (24")
42 (16 1/2")
L
CM+PS/PF
CU+PS/PF
1.790,00
1.927,00
56 (22 1/8")
63 (24 7/8")
93/100
62/69
43/50
L
CM+PS/PF
CU+PS/PF
1.810,00
1.947,00
56 (22 1/8")
63 (24 7/8")
93/100
62/69
43/50
L
CM+PS/PF
CU+PS/PF
2.345,00
(36 5/8" - 39 3/8") (24 3/8" - 27 1/8") (17" - 19 3/4")
(36 5/8" - 39 3/8") (24 3/8" - 27 1/8") (17" - 19 3/4")
WORK SEATS
84
PRICE
VAT excl.
2.483,00
Mizar
covered with coach hide, cushions in
fabric or soft leather.
MZ06TAGRS
small armchair with base, armrests and shell
support in aluminium, adjustable seat height,
reclinable back, height adjustable lumbar
support and cushions in cushions in fabric
MZ06PAGRS
small armchair with base, armrests and shell
support in aluminium, adjustable seat height,
reclinable back, height adjustable lumbar
support and cushions in soft leather
cover: coach hide and fabric, coach hide and soft leather
belts
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
56 (22 1/8")
63 (24 7/8")
123/130
62/69
43/50
L
CM+G
CU+G
2.524,00
2.696,00
56 (22 1/8")
63 (24 7/8")
123/130
62/69
43/50
L
CM+PS/PF
CU+PS/PF
2.678,00
2.861,00
(48 1/2" - 51 1/4") (24 3/8" - 27 1/8") (17" - 19 3/4")
(48 1/2" - 51 1/4") (24 3/8" - 27 1/8") (17" - 19 3/4")
PRICE
VAT excl.
WORK SEATS
85
Mizar
belts
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
MZ09TAGRF
in fabric
63 (24 7/8")
62 (24 3/8")
84 (33 1/8")
45 (17 3/4")
L
MZ09TAGRR
63 (24 7/8")
MZ09TAGR
cushions in fabric
63 (24 7/8")
Swivel armchairs in steel, shell covered with coach hide, cushions in
MZ09TAGRS
MZ09PAGRF
in soft leather
MZ09PAGRR
leather
MZ09PAGR
MZ09PAGRS
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
62 (24 3/8")
80 (31 1/2")
84/91
60 (23 5/8")
56 (22 1/8")
60/67
41 (16 1/8")
43/50
(33 1/8" - 35 7/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
84/91
60/67
43/50
(33 1/8" - 35 7/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
84 (33 1/8")
80 (31 1/2")
84/91
60 (23 5/8")
56 (22 1/8")
60/67
45 (17 3/4")
41 (16 1/8")
43/50
(33 1/8" - 35 7/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
84/91
60/67
43/50
(33 1/8" - 35 7/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
WORK SEATS
86
L
L
L
L
L
L
L
covers
PRICE
VAT excl.
CM+G
2.408,00
CU+G
2.597,00
CM+G
2.436,00
CU+G
2.624,00
CM+G
2.457,00
CU+G
2.645,00
CM+G
3.044,00
CU+G
3.231,00
CM+PS/PF
CM+PT/PL/PR
2.423,00
2.541,00
CU+PS/PF
CU+PT/PL/PR
2.611,00
2.729,00
CM+PS/PF
CM+PT/PL/PR
2.457,00
2.576,00
CU+PS/PF
CU+PT/PL/PR
2.645,00
2.764,00
CM+PS/PF
CM+PT/PL/PR
2.478,00
2.597,00
CU+PS/PF
CU+PT/PL/PR
2.667,00
2.785,00
CM+PS/PF
CM+PT/PL/PR
3.064,00
3.183,00
CU+PS/PF
CU+PT/PL/PR
3.252,00
3.372,00
Mizar
belts
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
MZ10TAGRF
in fabric
63 (24 7/8")
68 (26 3/4")
100 (39 3/8")
45 (17 3/4")
L
MZ10TAGR
cushions in fabric
63 (24 7/8")
MZ10TAGRS
MZ10PAGRF
in soft leather
MZ10PAGR
MZ10PAGRS
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
100/107
60 (23 5/8")
60/67
43/50
(39 3/8" - 42 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
100/107
60/67
43/50
(39 3/8" - 42 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
100 (39 3/8")
100/107
60 (23 5/8")
60/67
45 (17 3/4")
43/50
L
L
L
L
(39 3/8" - 42 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
100/107
60/67
43/50
(39 3/8" - 42 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
L
covers
PRICE
VAT excl.
CM+G
2.736,00
CU+G
2.953,00
CM+G
2.785,00
CU+G
3.001,00
CM+G
3.372,00
CU+G
3.587,00
CM+PS/PF
CM+PT/PL/PR
2.744,00
2.890,00
CU+PS/PF
CU+PT/PL/PR
2.959,00
3.106,00
CM+PS/PF
CM+PT/PL/PR
2.792,00
2.939,00
CU+PS/PF
CU+PT/PL/PR
3.009,00
3.156,00
CM+PS/PF
CM+PT/PL/PR
3.378,00
3.525,00
CU+PS/PF
CU+PT/PL/PR
3.595,00
3.742,00
WORK SEATS
87
Mizar
MZ11TAGRF
in fabric
MZ11TAGR
cushions in fabric
MZ11TAGRS
MZ11PAGRF
in soft leather
MZ11PAGR
MZ11PAGRS
belts
plated
plated
covered
Castors and glides
GRR):
"classe 1IM".
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
63 (24 7/8")
68 (26 3/4")
115 (45 1/4")
45 (17 3/4")
L
CM+G
3.009,00
CU+G
3.252,00
CM+G
3.057,00
CU+G
3.302,00
CM+G
3.623,00
CU+G
3.868,00
CM+PS/PF
CM+PT/PL/PR
3.016,00
3.183,00
CU+PS/PF
CU+PT/PL/PR
3.260,00
3.428,00
CM+PS/PF
CM+PT/PL/PR
3.064,00
3.231,00
CU+PS/PF
CU+PT/PL/PR
3.308,00
3.476,00
CM+PS/PF
CM+PT/PL/PR
3.651,00
3.818,00
CU+PS/PF
CU+PT/PL/PR
3.895,00
4.063,00
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
63 (24 7/8")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
68 (26 3/4")
115/122
60 (23 5/8")
60/67
43/50
115/122
60/67
43/50
L
(45 1/4" - 48 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
115 (45 1/4")
115/122
60 (23 5/8")
60/67
45 (17 3/4")
43/50
L
L
(45 1/4" - 48 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
115/122
60/67
43/50
(45 1/4" - 48 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
WORK SEATS
88
L
(45 1/4" - 48 1/8") (23 5/8" - 26 3/8") (17" - 19 3/4")
L
PRICE
VAT excl.
Mizar
Small armchairs in steel, shell covered with coach hide, available
leather.
MZ07BC
small armchair with exposed frame
MZ07BT
cushions in fabric
MZ07BP
cover: coach hide, coach hide and fabric,
coach hide and soft leather
painted, chrome or nickel plated
shell padding: high density flexible
cotton backing
"classe 1IM".
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
57 (22 1/2")
58 (22 7/8")
84 (33 1/8")
45 (17 3/4")
A
D
M
CM
CM
CM
1.099,00
1.213,00
1.369,00
A
D
M
CU
CU
CU
1.288,00
1.403,00
1.558,00
A
D
M
CM+G
CM+G
CM+G
1.346,00
1.461,00
1.615,00
A
D
M
CU+G
CU+G
CU+G
1.455,00
1.570,00
1.725,00
A
D
M
CM+PS/PF
CM+PS/PF
CM+PS/PF
1.502,00
1.626,00
1.792,00
A
D
M
CU+PS/PF
CU+PS/PF
CU+PS/PF
1.620,00
1.742,00
1.908,00
57 (22 1/2")
57 (22 1/2")
62 (24 3/8")
62
84 (33 1/8")
84 (33 1/8")
66 (26")
66 (26")
66 (26")
46 (18 1/8")
46 (18 1/8")
WORK SEATS
89
Mizar
Small armchairs in steel, shell covered with coach hide, available
leather.
MZ07MC
small armchair with exposed frame
MZ07MT
cushions in fabric
MZ07MP
cover: coach hide, coach hide and fabric,
coach hide and soft leather
painted, chrome or nickel plated
shell padding: high density flexible
cotton backing
"classe 1IM".
depth
cm (in)
height
height
height
seat cm (in)
metal
finish
covers
57 (22 1/2")
60 (23 5/8")
95 (37 3/8")
45 (17 3/4")
A
D
M
CM
CM
CM
1.150,00
1.265,00
1.420,00
A
D
M
CU
CU
CU
1.369,00
1.483,00
1.640,00
A
D
M
CM+G
CM+G
CM+G
1.403,00
1.518,00
1.673,00
A
D
M
CU+G
CU+G
CU+G
1.524,00
1.640,00
1.794,00
A
D
M
CM+PS/PF
CM+PS/PF
CM+PS/PF
1.570,00
1.693,00
1.859,00
A
D
M
CU+PS/PF
CU+PS/PF
CU+PS/PF
1.699,00
1.822,00
1.988,00
57 (22 1/2")
57 (22 1/2")
63 (24 7/8")
63 (24 7/8")
95 (37 3/8")
95 (37 3/8")
66 (26")
66 (26")
66 (26")
46 (18 1/8")
46 (18 1/8")
WORK SEATS
90
PRICE
VAT excl.
width
cm (in)
Zoe
cover: coach-hide with patented cutting
frame: steel
padding: flexible polyurethane foam with
high resistance
seat: cold moulded polyurethane foam
base: powder varnished steel frame
mecanism: gaslift for height adjustment
castors: polyammide Ø 50 mm with 50
kg load (lb 110.23)
Chair in coach-hide with patented
cutting, steel star base
width
cm (in)
depth
cm (in)
height
height
height
seat cm (in)
ZE20
chair in coach-hide with patented cutting,
fixed base
51 (20 1/8")
54 (21 1/4")
78 (30 3/4")
46 (18 1/8")
ZE21
chair in coach-hide with patented cutting,
height adjustable base
51 (20 1/8")
54 (21 1/4")
73/80 (28 3/4" -31 1/2" )
41/48 (16 1/8" -18 7/8" )
metal
finish
covers
PRICE
VAT excl.
CM
CU
624,00
715,00
CM
716,00
CU
808,00
WORK SEATS
91
East End
EAST END collection, designed by Piero Lissoni, is a collection of meeting tables, writing desks and various cabinets for executive
offices.
A very rational project, in the name of understatement, with an extreme formal simplicity, for multi-purpose working environments: EAST END can be large or small meeting tables, or an office where small cubic cabinets are matched with sideboards or
compact containers, fixed to the wall or freestanding, on light and elegant feet.
The natural elements chosen for this collection such as wood, coach hide or soft leather, enhance the craftmanship that lies
behind the product and make EAST END an almost residential line.
order.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
In order to fill-in correctly the orders, it's necessary to follow the below indicated instructions for each type of product, both for the choice of
basic single components and for accessories.
Writing desks and conference tables (basic elements)
1) Select the tops among the various proposals in the price list for:
- writing desk see page 78
- single tables
see from page 79 to 81
2) Select the legs according to the product. Description of the legs: see page 82;
2.1 writing desks:
- 4 cylindrical legs
- 2 cylindrical legs and 1 side panel
- 2 side panels
2.2 single conference tables
- 3 and 4 cylindrical legs
Writing desks (acccessories)
Select the accessories as side top and CPU holder see page 84, side panel and cable holder see page 83, cables way hole Ø 5 cm (2") and cables way hole Ø 8 cm (31/8") see
page 82, hanging drawer units or on castors see page 85,
Cabinets
Select the cabinets among the ones listed from page 86 to page 88, the support equipment and the accessories for the cabinets see page 89.
OFFICE FURNITURE
92
East End
frame: natural anodized or epoxy painted aluminium
tops: medium density panels covered
with soft leather or coach hide with stain
repellent treatment
Legs and side panels for writing desks
see page 82.
Accessories for writing desk tops see
from page 82 to 84.
East End model is shipped knockeddown.
When ordering please specify the position of the cables way hole (DX right
or SX left).
Writing desks covered with coach
hide or soft leather.
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE007P
soft leather top 180 cm
180 (70 7/8")
100 (39 3/8")
EE008P
200 (78 3/4")
EE009P
EE007
coach hide top 180 cm
EE008
EE009
SX
EE018SX/EE018DX
covers
5 (2")
A/B
PS/PF
2.597,00
100 (39 3/8")
5 (2")
A/B
PS/PF
2.653,00
240 (94 1/2")
100 (39 3/8")
5 (2")
A/B
PS/PF
3.127,00
180 (70 7/8")
100 (39 3/8")
5 (2")
A/B
CM
2.339,00
CU
2.939,00
CM
2.528,00
CU
3.204,00
CM
2.828,00
CU
3.637,00
PS/PF
3.147,00
CM
3.092,00
CU
4.020,00
240 (94 1/2")
100 (39 3/8")
100 (39 3/8")
5 (2")
5 (2")
A/B
A/B
DX
EE018PSX/EE018PDX
SX
PRICE
VAT excl.
metal
finish
200 (78 3/4")
wood
finish
220 (86 5/8")
115/85
5 (2")
A/B
220 (86 5/8")
115/85
5 (2")
A/B
(45 1/4" - 33 1/2")
DX
(45 1/4" - 33 1/2")
OFFICE FURNITURE
93
East End
repellent treatment.
see page 82.
Rectangular tops for single tables in
soft leather or coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE026P
180 (70 7/8")
100 (39 3/8")
EE027P
200 (78 3/4")
EE029P
EE026
EE027
EE029
covers
5 (2")
A/B
PS/PF
2.702,00
100 (39 3/8")
5 (2")
A/B
PS/PF
2.875,00
240 (94 1/2")
100 (39 3/8")
5 (2")
A/B
PS/PF
3.030,00
180 (70 7/8")
100 (39 3/8")
5 (2")
A/B
CM
2.381,00
CU
2.980,00
CM
2.555,00
CU
3.231,00
CM
2.813,00
CU
3.623,00
240 (94 1/2")
100 (39 3/8")
100 (39 3/8")
5 (2")
5 (2")
OFFICE FURNITURE
94
PRICE
VAT excl.
metal
finish
200 (78 3/4")
wood
finish
A/B
A/B
East End
repellent treatment.
see page 82.
Square tops for single tables in soft
leather or coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE114P
soft leather top
100 (39 3/8")
100 (39 3/8")
EE044P
soft leather top
160 (63")
EE047P
soft leather top
wood
finish
PRICE
VAT excl.
metal
finish
covers
5 (2")
A/B
PS/PF
1.830,00
160 (63")
5 (2")
A/B
PS/PF
3.420,00
200 (78 3/4")
200 (78 3/4")
5 (2")
A/B
PS/PF
4.886,00
EE114
coach hide top
100 (39 3/8")
100 (39 3/8")
5 (2")
A/B
CM
1.662,00
CU
1.997,00
EE044
coach hide top
160 (63")
160 (63")
5 (2")
CM
3.072,00
CU
3.915,00
EE047
coach hide top
200 (78 3/4")
200 (78 3/4")
5 (2")
CM
4.565,00
CU
5.897,00
A/B
A/B
OFFICE FURNITURE
95
East End
with soft leathe or coach hide with stain
repellent treatment
see page 82.
Please consider the use of 3 legs for tops
EE032-EE032P-EE034-EE034P and 4
legs for tops EE037-EE037P.
Round tops for single tables in soft
leather or coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
EE032P
soft leather top
125 (49 1/4")
5 (2")
A/B
PS/PF
2.758,00
EE034P
soft leather top
150 (59 1/8")
5 (2")
A/B
PS/PF
3.874,00
EE037P
soft leather top
172 (67 3/4")
5 (2")
A/B
PS/PF
4.913,00
EE032
coach hide top
125 (49 1/4")
5 (2")
A/B
CM
2.318,00
CU
2.758,00
CM
3.643,00
CU
4.307,00
CM
4.509,00
CU
5.339,00
EE034
coach hide top
EE037
coach hide top
150 (59 1/8")
172 (67 3/4")
5 (2")
5 (2")
OFFICE FURNITURE
96
A/B
A/B
East End
Legs for writing desks and conference tables, side panels and vertical
flexible cables way for writing desks.
cover: coach hide or leather
legs: circular section drawn aluminium,
natural anodized, epoxy painted or covered with coach hide
side panels: sandwich wood equipped
with inner cable way, coach hide or soft
leather covered
glides: aluminium, adjustable
vertical flexible cables way: flexible
plastic material with floor fixing system
cables way: natural anodized aluminium
The price of cables way hole included
the hole on the writing desk top.
width
cm (in)
EE051
natural anodized or epoxy painted aluminium leg
EE052
coach hide covered aluminium leg
depth
cm (in)
height
overall cm (in)
6 (2 3/8")
68 (26 3/4")
6 (2 3/8")
68 (26 3/4")
wood
finish
metal
finish
covers
PRICE
VAT excl.
83,00
A/B
CM
120,00
CU
161,00
EE054P
side panel covered with soft leather for
writing desks EE007-EE008-EE009-EE007PEE008P-EE009P
6 (2 3/8")
100 (39,4")
68 (26 3/4")
PS/PF
1.244,00
EE053P
side panel covered with soft leather for
writing desks EE018-EE018P
6 (2 3/8")
115 (45,3")
68 (26 3/4")
PS/PF
1.445,00
EE054
side panel covered with coach hide for
writing desks EE007-EE008-EE009-EE007PEE008P-EE009P
6 (2 3/8")
100 (39,4")
68 (26 3/4")
CM
1.278,00
CU
1.725,00
EE053
side panel covered with coach hide for
writing desks EE018-EE018P
6 (2 3/8")
CM
1.501,00
CU
2.004,00
115 (45,3")
68 (26 3/4")
EE059
vertical flexible cables way
5 (2")
70 (27 5/8")
EE705
cables way hole Ø 5 cm (2")
5 (2")
2 (0 3/4")
155,00
EE708
cables way hole Ø 8 cm (3 1/8")
8 (3 1/8")
2 (0 3/4")
170,00
78,00
OFFICE FURNITURE
97
East End
metal cables holder: bent aluminium
sheet, natural anodized (B01)
modesty panel: aluminium sheet, natural anodized, epoxy painted or coach
hide covered
Metal cables way and modesty panel
to be fixed to writing desks.
depth
cm (in)
height
overall cm (in)
EE055
metal cables way for wiring for writing desks
EE007-EE007P
139 (54 3/4")
16 (6 1/4")
3 (1 1/8")
99,00
EE056
EE008-EE008P
159 (62 5/8")
16 (6 1/4")
3 (1 1/8")
99,00
EE057
EE018-EE018P
179 (70 1/2")
16 (6 1/4")
3 (1 1/8")
114,00
EE058
EE009-EE009P
199 (78 3/8")
16 (6 1/4")
3 (1 1/8")
128,00
EE061
modesty panel for desks EE007-EE007P
163 (64 1/4")
1 (0 3/8")
47 (18 1/2")
A/B
448,00
EE062
183 (72 1/8")
1 (0 3/8")
47 (18 1/2")
A/B
482,00
EE063
200 (78 3/4")
1 (0 3/8")
47 (18 1/2")
A/B
511,00
EE064
223 (87 7/8")
1 (0 3/8")
47 (18 1/2")
A/B
539,00
EE065
163 (64 1/4")
1 (0 3/8")
47 (18 1/2")
A/B
EE066
EE067
EE068
183 (72 1/8")
200 (78 3/4")
223 (87 7/8")
1 (0 3/8")
1 (0 3/8")
1 (0 3/8")
47 (18 1/2")
47 (18 1/2")
47 (18 1/2")
OFFICE FURNITURE
98
wood
finish
metal
finish
A/B
A/B
A/B
covers
PRICE
VAT excl.
width
cm (in)
CM
783,00
CU
1.027,00
CM
859,00
CU
1.139,00
CM
929,00
CU
1.229,00
CM
1.006,00
CU
1.349,00
East End
side top frame: natural anodized or
epoxy painted aluminium
top: medium density panel covered with
soft leather or coach hide with stain repellent treatment covered
support for PC: epoxy painted steel
sheet
Legs for side top see page 82.
Legs ordering for the side top are:
2 legs in case the top is fixed to the desk,
4 legs for a free standing solution.
Side top for writing desks and CPU
holder.
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE011P
soft leather side top 115 cm. / 45,3"
115 (45 1/4")
60 (23 5/8")
EE011
coach hide side top 115 cm. / 45,3"
115 (45 1/4")
60 (23 5/8")
wood
finish
PRICE
VAT excl.
metal
finish
covers
5 (2")
A/B
PS/PF
1.313,00
5 (2")
A/B
CM
1.173,00
CU
1.424,00
EE109/V
CPU- Holder - vertical
24 (9 1/2")
51 (20 1/8")
55 (21 5/8")
A
339,00
EE109/O
CPU- Holder - horizontal
50 (19 3/4")
51 (20 1/8")
19 (7 1/2")
A
328,00
OFFICE FURNITURE
99
East End
Aluminium drawer units, natural
anodized or epoxy painted, with
coach hide covered fronts. Can be
fixed to writing desks.
cover: coach hide
drawer unit: wooden frame covered
with natural anodized aluminium sheet
(B01) or epoxy painted aluminium sheet; 2 or 3 drawers, coach hide covered
fronts, ball sliding telescopic guides and
cylinder lock
internal equipment drawers: pelican
drawer (upper drawer)
castors: black polyamide Ø 50 mm (2")
50 kg. (lb 110,23) load each
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE070
hanging drawer unit with 2 drawers for
writing desks
43 (17")
58 (22 7/8")
30 (11 7/8")
EE071
writing desks, with file holder in lower
drawer
43 (17")
EE072
writing desks
43 (17")
EE073
drawer unit on castors with 2 drawers, with
file holder in lower drawer
43 (17")
EE074
drawer unit on castors with 3 drawers
43 (17")
58 (22 7/8")
58 (22 7/8")
58 (22 7/8")
58 (22 7/8")
53 (20 7/8")
53 (20 7/8")
60 (23 5/8")
60 (23 5/8")
OFFICE FURNITURE
100
wood
finish
PRICE
VAT excl.
metal
finish
covers
A/B
CM
1.457,00
CU
1.523,00
CM
1.647,00
CU
1.738,00
CM
1.823,00
CU
1.921,00
CM
1.568,00
CU
1.659,00
CM
1.732,00
CU
1.829,00
A/B
A/B
A/B
A/B
East End
cover: coach hide
frame and shelves: chipboard panels in
veneered oak wood or medium density,
painted or lacquered in standard finishes
drawers: moulded painted sheet with
coach hide covered front drawers, ball sliding telescopic guides and cylinder lock
Bases, castors, equipment and accessories for low cabinets see page 89.
Wooden low cabinets with coach
hide doors or drawers and open
spaces.
EE082
door cabinet with front in coach hide and
inside shelf
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
100 (39 3/8")
58 (22 7/8")
53 (20 7/8")
H
Q
EE083DX/EE083SX
cabinet with 2 drawers and open space with
shelf, with file holder in lower drawer:
open space on the right-EE083DX
open space on the left-EE083SX
EE084DX/EE084SX
cabinet with 3 drawers and open space
with shelf:
open space on the right-EE084DX
open space on the left-EE084SX
100 (39 3/8")
58 (22 7/8")
53 (20 7/8")
H
Q
100 (39 3/8")
58 (22 7/8")
53 (20 7/8")
H
Q
EE085DX/EE085SX
cabinet with 2 drawers and door with shelf,
file holder in lower drawer:
with door on the right-EE085DX
with door on the left-EE085SX
100 (39 3/8")
58 (22 7/8")
53 (20 7/8")
H
Q
metal
finish
covers
PRICE
VAT excl.
CM
1.883,00
CU
2.050,00
CM
2.492,00
CU
2.659,00
CM
2.240,00
CU
2.327,00
CM
2.862,00
CU
2.949,00
CM
2.419,00
CU
2.511,00
CM
3.040,00
CU
3.133,00
CM
2.474,00
CU
2.653,00
CM
3.108,00
CU
3.287,00
OFFICE FURNITURE
101
East End
cover: coach hide
drawers: moulded painted sheet with
coach hide covered front drawers, ball sliding telescopic guides and cylinder lock
Bases, castors, equipment and accessories for low cabinets see page 89.
In the cabinet EE087 the height of the
sliding shelf for the keyboard is 56 cm
(221/8") from floor with base EE101 and 64
cm (251/4") from floor with base EE102.
Wooden low cabinets with coach
hide doors, drawers and open spaces.
EE086DX/EE086SX
cabinet with 3 drawers and door with
shelf:
with door on the right-EE086DX
with door on the left-EE086SX
Cabinet EE087 is not wall-hung.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
100 (39 3/8")
58 (22 7/8")
53 (20 7/8")
H
EE105
coach hide back finishing panel for low
cabinets
100 (39 3/8")
100 (39 3/8")
59 (23 1/4")
2 (0 3/4")
53 (20 7/8")
53 (20 7/8")
OFFICE FURNITURE
102
covers
PRICE
VAT excl.
CM
2.653,00
CU
2.844,00
CM
3.262,00
CU
3.453,00
H
CM
CU
2.978,00
3.072,00
Q
CM
3.656,00
CU
3.748,00
CM
452,00
CU
628,00
Q
EE087
cabinet for computer with 3 drawers, open
space with shelf and sliding keyboard platform, double bottom for cable-housing and
removable coach hide covered back
metal
finish
East End
doors: coach hide covered
locks: cylinder
sliding rails: extruded aluminium with
slides in plastic
handles: anodized aluminium
base: rectangular section drawn steel
epoxy painted with adjustable feet
Sliding file holders for cabinet EE222
see page 89.
High wooden cabinets on steel
bases, sliding doors covered with
coach hide.
EE222
cabinet with coach hide sliding doors with
2 inside shelves per compartment
The metal support bases is included in
the price.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
200 (78 3/4")
46 (18 1/8")
112 (44 1/8")
H
A
Q
A
covers
PRICE
VAT excl.
CM
7.501,00
CU
8.054,00
CM
8.946,00
CU
9.500,00
OFFICE FURNITURE
103
East End
base: rectangular section drawn steel
epoxy painted with adjustable feet
castors: black polyamide Ø 75mm (3")
100 kg. (lb 220,46) load
minifridge: capacity 45 lt.
sliding file holder: black painted steel.
Can be fixed to the side panels of the
cabinets
Cabinets equipped with minifridge must
be positioned so as to leave free one of
the two air grates.
When ordering specify the position of
minifridge (DX right or SX left).
Please specify when ordering in which
compartment file holders are to be
positioned.
Bases, castors and cabinets equipments.
depth
cm (in)
height
overall cm (in)
EE101
metal base for low cabinets
100 (39 3/8")
42 (16 1/2")
12 (4 3/4")
A
452,00
EE102
metal base for cabinet EE087
100 (39 3/8")
42 (16 1/2")
20 (7 7/8")
A
524,00
EE103
set of 4 castors
10 (4")
EE104
wall fixing set for wall-hung cabinets
(excluded EE087)
wood
finish
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
191,00
60,00
EE108/110
minifridge 110 Volt
(only for low cabinets EE082-EE085EE086)
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.449,00
EE108/220
minifridge 220 Volt
(only for low cabinets EE082-EE085EE086)
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.449,00
EE110
sliding file holder for cabinet EE222
94 (37")
36 (14 1/8")
10 (4")
OFFICE FURNITURE
104
367,00
East End
order.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
Modular conference tables.
1) Select the required top among the proposal see page 91 and 92:
Examples of compositions for modular conference tables and legs positioning
2) Select the required legs considering the description on page 92; for a correct selection of the necessary quantity of legs and the correct position according to the solution
required, see page 92.
The tops are fixed together thanks to a set of plates EE020 (page 92); these tops can be used without legs as connection between tables.
Equipped conference tables
Single conference tables are available equipped with legs and in different shapes and sizes (page 93).
Special size conference tables
It is possible to order special size conference tables (page 94).
OFFICE FURNITURE
105
East End
tops: medium density panels soft leather
or coach hide with stain repellent treatment covered
Legs for conference tables see page
92.
For a correct selection of the necessary
quantity of legs for modular conference
tables see page 92.
Tops for modular conference tables
in soft leather or coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
EE026P
180 (70 7/8")
100 (39 3/8")
EE027P
200 (78 3/4")
EE029P
EE026
EE027
EE029
PRICE
VAT excl.
metal
finish
covers
5 (2")
A/B
PS/PF
2.702,00
100 (39 3/8")
5 (2")
A/B
PS/PF
2.875,00
240 (94 1/2")
100 (39 3/8")
5 (2")
A/B
PS/PF
3.030,00
180 (70 7/8")
100 (39 3/8")
5 (2")
A/B
200 (78 3/4")
240 (94 1/2")
100 (39 3/8")
100 (39 3/8")
5 (2")
5 (2")
wood
finish
A/B
A/B
CM
2.381,00
CU
2.980,00
CM
2.555,00
CU
3.231,00
CM
2.813,00
CU
3.623,00
EE112P
soft leather top
100 (39 3/8")
100 (39 3/8")
5 (2")
A/B
PS/PF
1.767,00
EE114P
soft leather top
100 (39 3/8")
100 (39 3/8")
5 (2")
A/B
PS/PF
1.830,00
EE044P
soft leather top
160 (63")
160 (63")
5 (2")
A/B
PS/PF
3.420,00
EE047P
soft leather top
200 (78 3/4")
200 (78 3/4")
5 (2")
A/B
PS/PF
4.886,00
OFFICE FURNITURE
106
East End
leg: circular section drawn aluminium ,
natural anodized, epoxy painted or coach
hide covered
Legs for conference tables see page
92.
For a correct selection of the necessary
quantity of legs for modular conference
tables see this page.
Modular conference tables in soft
leather or in coach hide.
Layout for legs quantity.
Legs for conference tables.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
EE112
coach hide top
100 (39 3/8")
100 (39 3/8")
5 (2")
EE114
coach hide top
100 (39 3/8")
100 (39 3/8")
5 (2")
A/B
EE044
coach hide top
160 (63")
160 (63")
5 (2")
EE047
coach hide top
200 (78 3/4")
200 (78 3/4")
5 (2")
PRICE
VAT excl.
metal
finish
covers
A/B
CM
1.544,00
CU
1.822,00
CM
CU
1.662,00
A/B
CM
CU
3.072,00
3.915,00
A/B
CM
4.565,00
CU
5.897,00
EE020
set of plates for fixing modular tops
(1 set per junction)
1.997,00
67,00
Layout of the legs positioning for
modular tables according to the
frame arrangement:
EE051
natural anodized or epoxy painted aluminium leg
6 (2 3/8")
68 (26 3/4")
EE052
coach hide covered aluminium leg
6 (2 3/8")
68 (26 3/4")
83,00
A/B
CM
120,00
CU
161,00
OFFICE FURNITURE
107
East End
leg: circular section drawn aluminium ,
natural anodized, epoxy painted or coach
hide covered
Extra charge for coach hide covered
aluminium legs:
CM Euro 48,00 each excl. VAT
CU Euro 84,00 each excl. VAT
Conference tables with aluminium
legs.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
EE912
soft leather top for 10 seatings
320 (126 1/8") 120 (47 1/4")
73 (28 3/4")
A/B
PS/PF
5.791,00
EE922
soft leather top for 10/12 seatings
360 (141 7/8") 160 (63")
73 (28 3/4")
A/B
PS/PF
7.110,00
EE913
coach hide top for 10 seatings
320 (126 1/8") 120 (47 1/4")
73 (28 3/4")
A/B
CM
5.387,00
CU
6.594,00
CM
7.318,00
CU
9.140,00
EE923
coach hide top for 10/12 seatings
360 (141 7/8") 160 (63")
73 (28 3/4")
OFFICE FURNITURE
108
A/B
East End
frame: epoxy painted aluminium
repellent treatment
Charge for legs see page 92.
Curve composition: minimum radius
required 60 cm (23 5/8").
Minimum requested surface for round
and oval tops is 3,5 m² (38 ft2) and 4,5 m²
(49 ft2) for rectangular and square tops.
Tops for special size conference
tables.
Price refers to the overall size.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
PRICE
VAT excl.
metal
finish
covers
EE602
soft leather top
A
PS/PF
2.583,00
EE603
coach hide top
A
CM
2.820,00
CU
3.092,00
round top without legs (price per m²)
oval top without legs (price per m²)
EE606
soft leather top
A
PS/PF
2.911,00
EE607
coach hide top
A
CM
3.114,00
CU
3.386,00
rectangular or square top without legs
(price per m²)
EE612
soft leather top
A/B
PS/PF
2.081,00
EE613
coach hide top
A/B
CM
2.095,00
CU
2.367,00
EE650
Cables cubby prearranged for electric power/data/microphones/video equipment,
with either no. 8 single sockets or no. 4
double sockets
The cap can be epoxy painted or coach
hide covered
16 (6 1/4")
16 (6 1/4")
Prices upon request
15 (5 7/8")
26 (10 1/4")
OFFICE FURNITURE
109
Metron
cover: coach hide
bases: wood covered with coach hide,
metal fixing plates, black epoxy painted
aluminium glides
tops: multilayer wood, oak or walnut
solid wood edges stained in standard
finishes, coach hide with stain repellent
treatment covered
Special sizes
see pages from 103 to 105 for single components and indications for special items.
Writing desks and conference tables
with coach hide covered top and
bases.
MR24A
writing desk with type A bases and top in
coach hide
Writing desks and conference tables are
shipped knocked-down.
depth
cm (in)
height
overall cm (in)
wood
finish
240 (94 1/2")
110 (43 3/8")
73 (28 3/4")
Q
CM
CU
9.700,00
10.935,00
N
CM
CU
9.700,00
10.935,00
Q
CM
CU
13.698,00
14.919,00
N
CM
CU
13.698,00
14.919,00
Q
CM
CU
13.188,00
14.668,00
N
CM
CU
13.188,00
14.668,00
MR16A
conference table for 5 seatings with type A 160 (63")
bases and top in coach hide
73 (28 3/4")
MR32A
conference table for 10/12 seatings with 320 (126 1/8") 110 (43 3/8")
type A bases and top in coach hide
73 (28 3/4")
OFFICE FURNITURE
110
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
Metron
cover: coach hide
aluminium glides
treatment covered
Special sizes
see from pages 103 to 105 for single components and indications for special items.
Conference tables with coach hide
covered top and bases.
Conference tables are shipped knockeddown.
width
cm (in)
MR36A
conference table for 14 seatings with type
A bases and top in coach hide
depth
cm (in)
360 (141 7/8") 170 (67")
height
overall cm (in)
wood
finish
73 (28 3/4")
Q
N
MR48A
A bases and top in coach hide
480 (189 1/8") 190 (74 7/8")
73 (28 3/4")
Q
N
metal
finish
covers
PRICE
VAT excl.
CM
25.064,00
CU
27.744,00
CM
25.064,00
CU
27.744,00
CM
33.206,00
CU
37.204,00
CM
33.206,00
CU
37.204,00
extra charge for MR36A and MR48A
tables with central inlay:
Q/N
wood
12%
satined glass
17%
black granite Nero Assoluto
22%
OFFICE FURNITURE
111
Metron
cover: coach hide
aluminium glides
treatment covered
modesty panel: black epoxy painted
sheet covered with coach hide
Special sizes
Writing desks and conference tables
with coach hide covered top and
bases.
MR24B
writing desk with type B bases and top in
coach hide
Writing desks and conference tables are
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
240 (94 1/2")
110 (43 3/8")
73 (28 3/4")
Q
N
MRB/MP
modesty panel for MR24B writing desks
MR32B
conference table for 10/12 seatings with
type B bases and top in coach hide
106 (41 3/4")
5 (2")
45 (17 3/4")
320 (126 1/8") 110 (43 3/8")
73 (28 3/4")
Q
N
OFFICE FURNITURE
112
metal
finish
covers
PRICE
VAT excl.
CM
9.233,00
CU
10.474,00
CM
9.233,00
CU
10.474,00
CM
511,00
CU
650,00
CM
12.783,00
CU
14.339,00
CM
12.783,00
CU
14.339,00
Metron
cover: coach hide
aluminium glides
treatment covered
Special sizes
see from page 106 for single components and
indications for special items.
Conference tables with coach hide
covered top and bases.
width
cm (in)
MR36B
B bases and top in coach hide
depth
cm (in)
360 (141 7/8") 170 (67")
height
overall cm (in)
wood
finish
73 (28 3/4")
Q
N
MR48B
B bases and top in coach hide
480 (189 1/8") 190 (74 7/8")
73 (28 3/4")
Q
N
metal
finish
covers
PRICE
VAT excl.
CM
23.738,00
CU
26.529,00
CM
CU
23.738,00
26.529,00
CM
28.867,00
CU
32.571,00
CM
28.867,00
CU
32.571,00
extra charge for MR36B and MR48B
tables with central inlay:
Q/N
wood
12%
satined glass
17%
22%
OFFICE FURNITURE
113
Metron
cover: coach hide
base: wood covered with coach hide,
stainless steel fixing plates; black epoxy
painted aluminium glides
top: bevelled clear glass 15 mm (5/8")
thickness
Special sizes
Writing desks and tables with glass
top and coach hide covered bases.
depth
cm (in)
height
overall cm (in)
MR24CB
writing desk with type B bases and top in
tempered glass
240 (94 1/2")
100 (39 3/8")
73 (28 3/4")
CM
CU
6.239,00
6.770,00
MR26CB
conference table for 8/10 seatings with type
B bases and top in tempered glass
260 (102 1/2") 100 (39 3/8")
73 (28 3/4")
CM
6.659,00
CU
7.188,00
OFFICE FURNITURE
114
wood
finish
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
Metron
cover: coach hide
frame: chipboard panels veneered oak
or walnut wood painted in standard
finishes
glass shelf supports: circular section
stainless steel
shelves: bevelled clear glass 15 mm (5/8")
thickness
minifridge: capacity 45 lt.
Special sizes
upon request
Cabinet is shipped knocked-down.
Cabinets equipped with minifridge must
be positioned so as to leave free one of
the two air grates.
When ordering, please specify the
position of the minifridge (DX right or
SX left).
Extra charge for tempered glass to be
calculated on overall sizes:
Euro 247,00 per m2 excl. VAT
Wooden cabinets with coach hide
parts.
MR506/1
cabinet with doors in coach hide; clear glass
shelf, 2 clear glass shelves inside
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
200 (78 3/4")
54/34
73/60
Q
(21 1/4" - 13 3/8") (28 3/4" - 23 5/8")
N
MR508/1
cabinet with 2 doors, 1 large drawer, and
4 drawers with lock; clear glass shelf and 1
clear glass shelf inside
200 (78 3/4")
54/34
73/60
(21 1/4" - 13 3/8") (28 3/4" - 23 5/8")
Q
N
metal
finish
covers
PRICE
VAT excl.
CM
8.256,00
CU
8.605,00
CM
9.142,00
CU
9.490,00
CM
9.797,00
CU
10.168,00
CM
10.725,00
CU
11.096,00
MR108/110
minifridge 110 Volt for MR506-508
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.449,00
MR108/220
minifridge 220 Volt for MR506-508
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.449,00
OFFICE FURNITURE
115
Metron
cover: coach hide
finishes
drawers: black anodized aluminium with
ball sliding telescopic guides
castors: revolving, in black polyamide
ø 50 mm (2"), 50 kg. (lb 110,23) load each,
suitable for soft floors (carpets, etc.)
locks: cylinder
Special sizes
upon request
Wooden drawer units with coach
hide parts.
MR501
drawer unit with front drawers in coach
hide
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
56 (22 1/8")
54 (21 1/4")
60 (23 5/8")
Q
MR502
hide
56 (22 1/8")
43 (17")
54 (21 1/4")
54 (21 1/4")
60 (23 5/8")
60 (23 5/8")
43 (17")
54 (21 1/4")
60 (23 5/8")
3.194,00
3.285,00
CM
3.448,00
CU
3.540,00
Q
CM
CU
3.285,00
3.455,00
N
CM
3.540,00
CU
3.709,00
CM
2.881,00
CU
2.952,00
CM
3.122,00
CU
3.194,00
CM
2.946,00
CU
3.076,00
CM
3.200,00
CU
3.331,00
Q
Q
N
OFFICE FURNITURE
116
PRICE
VAT excl.
CU
N
MR502/C
drawer unit with front drawers and top in
coach hide with stain repellent treatment
covers
CM
N
MR501/C
metal
finish
Metron
Special sizes
upon request
cover: coach hide
finishes
drawers: black anodized aluminium with
ball sliding telescopic guides
castors: revolving, in black polyamide
ø 50 mm (2"), 50 kg. (lb 110,23) load each,
suitable for soft floors (carpets, etc.)
locks: cylinder
Wooden drawer units with coach
hide parts.
MR503
hide
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
96 (37 7/8")
54 (21 1/4")
60 (23 5/8")
Q
N
MR503/C
96 (37 7/8")
54 (21 1/4")
60 (23 5/8")
Q
N
metal
finish
covers
PRICE
VAT excl.
CM
4.839,00
CU
4.995,00
CM
5.250,00
CU
5.406,00
CM
4.989,00
CU
5.282,00
CM
5.401,00
CU
5.694,00
OFFICE FURNITURE
117
Metron
cover: coach hide
aluminium glides
Bases covered with coach hide for
special size conference tables.
Extra charge 10% for cables way predisposition only with base type B.
ELEMENTS
width
cm (in)
depth
cm (in)
height
overall cm (in)
MRA1
base type A only for MRS2
14 (5 1/2")
48 (18 7/8")
65 (25 5/8")
MRA5
base type A for MRS1 and MRS3
MRA6
base type A for MRS3 and MRS4
MRB1
base type B only for MRS2 and MRS4
MRB3
base type B only for MRS4
14 (5 1/2")
19 (7 1/2")
14 (5 1/2")
14 (5 1/2")
24 (9 1/2")
65 (25 5/8")
38 (15")
65 (25 5/8")
57 (22 1/2")
65 (25 5/8")
100 (39 3/8")
65 (25 5/8")
OFFICE FURNITURE
118
wood
finish
metal
finish
covers
PRICE
VAT excl.
CM
1.529,00
CU
1.690,00
CM
853,00
CU
943,00
CM
1.550,00
CU
1.732,00
CM
1.501,00
CU
1.864,00
CM
2.116,00
CU
2.555,00
Metron
cover: coach hide
top: multilayer wood, solid wood edges
painted in standard finishes, coach hide
with stain repellent treatment covered
tables.
Tops prices per m2 refer to the maximum overall sizes.
width
cm (in)
MRS1
square top in coach hide (price per m²)
depth
cm (in)
height
overall cm (in)
wood
finish
8 (3 1/8")
Q
N
MRS2
rectangular top in coach hide (price per
m²)
8 (3 1/8")
Q
N
MRS3
round top in coach hide (price per m²)
8 (3 1/8")
Q
N
MRS4
round sides top in coach hide (price per
m²)
8 (3 1/8")
Q
N
metal
finish
covers
PRICE
VAT excl.
CM
3.448,00
CU
3.742,00
CM
3.448,00
CU
3.742,00
CM
3.448,00
CU
3.742,00
CM
3.448,00
CU
3.742,00
CM
4.760,00
CU
5.053,00
CM
4.760,00
CU
5.053,00
CM
3.664,00
CU
3.958,00
CM
3.664,00
CU
3.958,00
OFFICE FURNITURE
119
Metron
cover: coach hide
top: multilayer wood, solid wood edges
painted in standard finishes, coach hide
with stain repellent treatment covered
tables.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
extra charge for central inlay tops
MRS1, MRS3 and MRS4
wood
Q/N
12%
satined glass
17%
22%
MR650
double sockets
The cap can be epoxy painted or coach
hide covered
16 (6 1/4")
16 (6 1/4")
Prices upon request
15 (5 7/8")
26 (10 1/4")
OFFICE FURNITURE
120
Metron
cover: coach hide
supports: circular section stainless steel,
glued to the glass top
aluminium glides
Bases covered with coach hide for
writing desks and tables with tops
in glass.
MRB2
base type B for tops in clear glass with
glued supports
width
cm (in)
depth
cm (in)
height
overall cm (in)
14 (5 1/2")
57 (22 1/2")
71,5 (28 1/8")
wood
finish
metal
finish
covers
CM
CU
PRICE
VAT excl.
1.788,00
2.052,00
Metron
top: bevelled clear glass 15 mm
thickness, available on design
( 5/ 8")
Tops prices per m2 refer to the maximun overall size.
Requested surface dimensions are from
a minimum of 1 m² (11 ft2) to a maximum
of 4 m2 (43 ft2).
Extra charges for tempered glass to be
calculated on overall sizes:
Tops in clear glass for special size.
width
cm (in)
depth
cm (in)
height
overall cm (in)
wood
finish
metal
finish
covers
PRICE
VAT excl.
CRI110
square or rectangular clear glass: price
per m2
1,5 (5/8")
851,00
CRI99
round or special on design clear glass: price
per m2
1,5 (5/8")
949,00
OFFICE FURNITURE
121
Must
order.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
covers
PRICE
VAT excl.
In order to fill-in correctly the orders, please follow the below instructions, both for choosing the basic components and the accessories.
Writing desks and tables (basic elements)
1) Select the top among the different proposals in the price list for:
- writing desks see
page 108
- tables see page 112 to page 114
2) Select the base according to the writing desk top:
- open bases see
page 109
- bases partially closed by side panels see page 109
3) Select the bases according to the table top:
- open bases see
page 115 and 116
- bases closed by side panels see from pages 115 to 117
Writing desks (accessories)
Select on pages 110 and 111 the accessories such as side top, vertical flexible cables way, cables way hole Ø 5 cm (2") and cables way hole Ø 8 cm (3 1/8"), vertical telescopic
set to connect the electric power/data/microphones/video equipment
Tables (accessories)
Select on pages 118 and 119 the accessories such as the vertical flexible cables way, cables way hole Ø 5 cm (2") and cables way hole Ø 8 cm (3 1/8"), vertical telescopic set
or cables cubbyto connect the electric power/data/microphones/video equipment
OFFICE FURNITURE
122
Must
tops: tempered glass with black painted
on reverse side, thickness 15 mm (5/8"), or
medium density panels covered with soft
leather or coach hide with stain repellent
treatment
Tops for writing desks in glass or
covered with coach hide or soft
leather.
Accessories for writing desks tops see
page 110 and page 111.
The writing desks and the bases are
depth
cm (in)
height
overall cm (in)
MU001CRN
glass top painted on reverse side 180 cm
180 (70 7/8")
100 (39 3/8")
1,5 (5/8")
1.377,00
MU002CRN
210 (82 5/8")
100 (39 3/8")
1,5 (5/8")
1.595,00
MU003CRN
250 (98 3/8")
110 (43 1/4")
1,5 (5/8")
2.016,00
MU001P
180 (70 7/8")
100 (39 3/8")
3 (1 1/8")
PS
2.073,00
MU002P
210 (82 5/8")
100 (39 3/8")
3 (1 1/8")
PS
2.339,00
MU003P
250 (98 3/8")
110 (43 1/4")
3 (1 1/8")
PS
2.862,00
MU001C
180 (70 7/8")
100 (39 3/8")
3 (1 1/8")
CM
CU
2.576,00
CM
CU
2.953,00
CM
CU
3.972,00
MU002C
MU003C
210 (82 5/8")
250 (98 3/8")
100 (39 3/8")
110 (43 1/4")
3 (1 1/8")
3 (1 1/8")
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
1.872,00
2.136,00
2.925,00
OFFICE FURNITURE
123
Must
bases: epoxy painted or chrome plated
steel
side panels: medium density panels and
multilayer beech wood covered with soft
leather or coach hide
glides: adjustable or no-slip plastic
glides
Epoxy painted or chrome plated bases for writing desks, with or without
side panels.
Accessories for writing desks tops see
page 110 and page 111.
The writing desks and the bases are
depth
cm (in)
height
overall cm (in)
metal
finish
MU001BS
base for writing desk top 180 cm
140 (55 1/8")
70 (27 5/8")
70 (27 5/8")
A
D
2.483,00
3.291,00
MU002BS
170 (67")
70 (27 5/8")
70 (27 5/8")
A
D
2.528,00
3.344,00
MU003BS
210 (82 3/4")
70 (27 5/8")
70 (27 5/8")
A
D
2.587,00
3.513,00
140 (55 1/8")
70 (27 5/8")
70 (27 5/8")
A
A
PS
CM
CU
3.546,00
3.581,00
3.902,00
D
D
PS
CM
CU
4.314,00
4.349,00
4.670,00
A
A
PS
CM
CU
3.713,00
3.734,00
4.119,00
D
D
PS
CM
CU
4.481,00
4.502,00
4.886,00
A
A
PS
CM
CU
3.895,00
3.923,00
4.391,00
D
D
PS
CM
CU
4.781,00
4.815,00
5.276,00
MU001BP
base with panels for writing desk top 180
cm
MU002BP
cm
MU003BP
cm
170 (67")
210 (82 3/4")
70 (27 5/8")
70 (27 5/8")
70 (27 5/8")
70 (27 5/8")
OFFICE FURNITURE
124
covers
PRICE
VAT excl.
width
cm (in)
Must
side tops and frame: medium density
panels covered with soft leather or coach
hide with stain repellent treatment
castors: revolving castors in nylon with
rubber ring, ø 40 mm (1 5/8") load 35 kg
(lb 77,16) each.
vertical flexible cables way: plastic
cables way: aluminium with aluminium
closing cap, soft leather or coach hide
covered
The side top and drawer unit of the
model MU051DX and MU051SX are
The side tops are not to be used with
glass tops for writing desks.
The cables way hole is not available on
glass tops.
When ordering please specify the position of the cables way hole (DX right or
SX left) inside or outside.
Accessories for writing desks.
MU050DX
metal
finish
depth
cm (in)
height
overall cm (in)
covers
136 (53 1/2")
60 (23 5/8")
69 (27 1/8")
PS
CM
CU
2.758,00
2.381,00
3.114,00
136 (53 1/2")
60 (23 5/8")
69 (27 1/8")
PS
CM
CU
5.758,00
5.541,00
6.434,00
MU050SX
MU050DX
side top for writing desk with CPU holder
on the right
MU050SX
side top for writing desk with CPU holder
on the left
MU051DX
PRICE
VAT excl.
width
cm (in)
MU051SX
MU051DX
side top for writing desk with drawer unit
with 4 drawers on the right
MU051SX
side top for writing desk with drawer unit
with 4 drawers on the left
MU059
5 (2")
right outside cables way DX
Operator side
71,00
70 (27 5/8")
left outside cables way SX
left inside cables way SX
right inside cables way DX
Operator side
Operator side
Operator side
MU705
cables way hole Ø 5 cm (2") for tops covered
with soft leather and coach hide
5 (2")
2 (0 3/4")
A
D
157,00
157,00
MU708
cables way hole Ø 8 cm (3 1/8") for tops covered with soft leather and coach hide
8 (3 1/8")
2 (0 3/4")
A
D
170,00
170,00
OFFICE FURNITURE
125
Must
vertical telescopic set: aluminium
frame and plastic material with blue led
light and stainless steel cap
When ordering please specify the position of vertical telescopic set.
Accessories for writing desks.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
covers
PRICE
VAT excl.
Basic equipment of element MU660:
- n. 2 power sockets model Shuko
MU660
vertical telescopic set to connect the electric
power equipment
10 (3 7/8")
10 (3 7/8")
0-16 (0 - 6 1/4")
882,00
Basic equipment element of MU661:
- n. 2 audio sockets jacks 3,5 mm
- n. 2 data sockets RJ45 CAT5
- n. 1 socket VGA 15-pin
MU661
power/data/audio/video equipment
10 (3 7/8")
10 (3 7/8")
0-30 (0 - 11 3/4")
OFFICE FURNITURE
126
1.655,00
Must
treatment
Accessories for tables tops see page 118
and page 119.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
MU001CRN
180 (70 7/8")
100 (39 3/8")
1,5 (5/8")
1.377,00
MU002CRN
210 (82 5/8")
100 (39 3/8")
1,5 (5/8")
1.595,00
MU003CRN
250 (98 3/8")
110 (43 1/4")
1,5 (5/8")
2.016,00
MU004CRN
300 (118 1/8") 120 (47 1/4")
1,5 (5/8")
2.601,00
MU001PT
180 (70 7/8")
100 (39 3/8")
3 (1 1/8")
PS
1.956,00
MU002PT
210 (82 5/8")
100 (39 3/8")
3 (1 1/8")
PS
2.213,00
MU003PT
250 (98 3/8")
110 (43 1/4")
3 (1 1/8")
PS
2.736,00
MU004PT
300 (118 1/8") 120 (47 1/4")
3 (1 1/8")
PS
3.853,00
MU001CT
180 (70 7/8")
100 (39 3/8")
3 (1 1/8")
CM
1.739,00
CU
2.444,00
CM
2.011,00
CU
2.828,00
Tops for tables in glass or covered
with coach hide or soft leather.
MU002CT
MU003CT
MU004CT
210 (82 5/8")
250 (98 3/8")
100 (39 3/8")
110 (43 1/4")
300 (118 1/8") 120 (47 1/4")
3 (1 1/8")
3 (1 1/8")
3 (1 1/8")
covers
PRICE
VAT excl.
CM
2.624,00
CU
3.671,00
CM
3.386,00
CU
4.725,00
OFFICE FURNITURE
127
Must
treatment
and page 119.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
MU011CRN
glass top painted on reverse side
130 (51 1/8")
130 (51 1/8")
1,5 (5/8")
1.278,00
MU012CRN
160 (63")
160 (63")
1,5 (5/8")
1.834,00
MU013CRN
200 (78 3/4")
200 (78 3/4")
1,5 (5/8")
2.893,00
MU011P
soft leather top
130 (51 1/8")
130 (51 1/8")
3 (1 1/8")
PS
1.956,00
MU012P
soft leather top
160 (63")
160 (63")
3 (1 1/8")
PS
2.472,00
MU013P
soft leather top
200 (78 3/4")
200 (78 3/4")
3 (1 1/8")
PS
3.769,00
MU011C
coach hide top
130 (51 1/8")
130 (51 1/8")
3 (1 1/8")
CM
1.774,00
CU
2.444,00
MU012C
coach hide top
MU013C
coach hide top
160 (63")
200 (78 3/4")
3 (1 1/8")
160 (63")
200 (78 3/4")
3 (1 1/8")
OFFICE FURNITURE
128
covers
PRICE
VAT excl.
CM
2.333,00
CU
3.287,00
CM
3.456,00
CU
4.899,00
Must
treatment
and page 119.
width
cm (in)
metal
finish
depth
cm (in)
height
overall cm (in)
covers
PRICE
VAT excl.
MU021CRN
130 (51 1/8")
1,5 (5/8")
1.393,00
MU022CRN
160 (63")
1,5 (5/8")
2.051,00
MU023CRN
200 (78 3/4")
1,5 (5/8")
3.007,00
MU021P
soft leather top
130 (51 1/8")
3 (1 1/8")
PS
1.844,00
MU022P
soft leather top
160 (63")
3 (1 1/8")
PS
2.352,00
MU023P
soft leather top
200 (78 3/4")
3 (1 1/8")
PS
3.518,00
MU021C
coach hide top
130 (51 1/8")
3 (1 1/8")
CM
CU
1.662,00
2.178,00
MU022C
coach hide top
160 (63")
3 (1 1/8")
CM
CU
2.178,00
2.932,00
MU023C
coach hide top
200 (78 3/4")
3 (1 1/8")
CM
CU
3.274,00
4.412,00
OFFICE FURNITURE
129
Must
steel
side panels: medium density panels covered with soft leather or coach hide
glides
and page 119.
The table bases are shipped assembled,
with the exception of models MU013BS,
MU013BP, MU014BS and MU014BP
that are shipped partially knockeddown.
Epoxy painted or chrome plated
bases for tables, with or without
side panels.
The removable base panels are shipped
separatly from the base.
depth
cm (in)
height
overall cm (in)
metal
finish
MU011BS
base for table top of 180x100 cm
140 (55 1/8")
70 (27 5/8")
70 (27 5/8")
A
D
2.325,00
3.102,00
MU012BS
170 (67")
70 (27 5/8")
70 (27 5/8")
A
D
2.390,00
3.187,00
MU013BS
210 (82 3/4")
70 (27 5/8")
70 (27 5/8")
A
D
3.553,00
4.786,00
MU014BS
260 (102 1/2") 70 (27 5/8")
70 (27 5/8")
A
D
3.559,00
4.851,00
70 (27 5/8")
70 (27 5/8")
A
A
PS
CM
CU
4.041,00
4.076,00
4.586,00
D
D
PS
CM
CU
4.787,00
4.823,00
5.332,00
A
A
PS
CM
CU
4.370,00
4.391,00
5.025,00
D
D
PS
CM
CU
5.102,00
5.122,00
5.758,00
MU011BP
base with panels for table top of
180x100 cm
MU012BP
210x100 cm
140 (55 1/8")
170 (67"))
70 (27 5/8")
70 (27 5/8")
OFFICE FURNITURE
130
covers
PRICE
VAT excl.
width
cm (in)
Must
steel
glides
side panels.
MU013BP
250x110 cm
MU014BP
300x120 cm
and page 119.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
covers
210 (82 3/4")
70 (27 5/8")
70 (27 5/8")
A
A
PS
CM
CU
6.414,00
6.393,00
7.216,00
D
D
PS
CM
CU
7.356,00
7.335,00
8.158,00
A
A
PS
CM
6.845,00
6.866,00
D
D
CU
PS
CM
CU
7.942,00
7.963,00
7.984,00
9.058,00
260 (102 1/2") 70 (27 5/8")
70 (27 5/8")
MU021BS
base for table top of130x130 cm
(square or round)
70 (27 5/8")
70 (27 5/8")
70 (27 5/8")
A
D
2.012,00
2.698,00
MU022BS
(square or round)
103 (40 5/8")
103 (40 5/8")
70 (27 5/8")
A
D
2.520,00
3.461,00
MU023BS
(qsquare or round)
130 (51 1/8")
130 (51 1/8")
70 (27 5/8")
A
D
2.652,00
3.879,00
OFFICE FURNITURE
131
Must
steel
glides
side panels.
MU021BP
base with panels for table top of 130x130
cm (square or round)
MU022BP
MU023BP
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
overall cm (in)
metal
finish
covers
70 (27 5/8")
70 (27 5/8")
70 (27 5/8")
A
A
PS
CM
CU
3.211,00
3.225,00
3.456,00
D
D
PS
CM
CU
3.943,00
3.958,00
4.188,00
A
A
PS
CM
CU
4.014,00
4.041,00
4.565,00
D
D
PS
CM
CU
5.053,00
5.081,00
5.604,00
A
A
PS
CM
CU
4.641,00
4.627,00
5.283,00
D
D
PS
CM
CU
5.953,00
5.939,00
6.594,00
103 (40 5/8")
130 (51 1/8")
103 (40 5/8")
130 (51 1/8")
70 (27 5/8")
70 (27 5/8")
OFFICE FURNITURE
132
and page 119.
Must
vertical flexible cables way: plastic
material
cables way hole: aluminium with aluminium closing cap, soft leather or coach
hide covered
vertical telescopic set: aluminium
frame and plastic material with blue led
and stainless steel cap
The cables way is not available on glass
tops.
When ordering please specify the position of the cables way hole (DX right
or SX left).
When ordering please specify the position of vertical telescopic set.
Table accessories.
width
cm (in)
MU059
depth
cm (in)
5 (2")
right outside cables way DX
height
overall cm (in)
metal
finish
PRICE
VAT excl.
covers
71,00
70 (27 5/8")
left outside cables way SX
Operator side
right inside cables way DX
Operator side
left inside cables way SX
Operator side
Operator side
MU705
cable way Ø 5 cm (2") for tops covered with
soft leather and coach hide
5 (2")
2 (0 3/4")
A
D
157,00
157,00
MU708
cable way Ø 8 cm (3 1/8") for tops covered
with soft leather and coach hide
8 (3 1/8")
2 (0 3/4")
A
D
170,00
170,00
Basic equipment for element MU660:
MU660
power equipment
10 (3 7/8")
10 (3 7/8")
0-16 (0 - 6 1/4")
882,00
Basic equipment for element MU661:
- n. 1 audio sockets jacks 3,5 mm
- n. 2 data sockets RJ45 CAT5
- n. 1 socket VGA 15-pin
MU661
power/data/audio/video equipment
10 (3 7/8")
10 (3 7/8")
0-30 (0 - 11 3/4")
1.655,00
OFFICE FURNITURE
133
Must
frame: black epoxy painted
sockets plate set in steel soft
coach hide covered
cap: black epoxy painted
aluminium covered with soft
coach hide
steel with
leather or
extruded
leather or
When ordering please specify the position of the cables cubbies.
The price of the cables cubbies includes the arrangement of the table top
and does not include the electrical
equipment.
The sockets plate set cover and cap are
always matched with the cover top.
Table accessories.
MU660M
double sockets.Manual cap opening
MU660A
double sockets.Authomatic cap opening
MU670M
MU670A
MU680M
MU680A
MU690M
MU690A
depth
cm (in)
height
overall cm (in)
23 (9")
11 (4 3/8")
16 (6 1/4")
386,00
23 (9")
11 (4 3/8")
16 (6 1/4")
500,00
47,5 (18 3/4") 11 (4 3/8")
16 (6 1/4")
516,00
47,5 (18 3/4") 11 (4 3/8")
16 (6 1/4")
630,00
60 (23 5/8")
11 (4 3/8")
16 (6 1/4")
598,00
60 (23 5/8")
11 (4 3/8")
16 (6 1/4")
712,00
73,5 (29")
11 (4 3/8")
16 (6 1/4")
690,00
73,5 (29")
11 (4 3/8")
16 (6 1/4")
804,00
OFFICE FURNITURE
134
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
Wave
Design: Gordon Guillaumier - 2006
cover: coach hide
frame: coach hide covered medium density panels with
black lacquered inner part; black lacquered back
doors and drawer fronts: medium density panels
with black lacquered inner part and wave shaped handle
in rigid polyurethane foam, covered with coach hide
shelves: black lacquered medium density panels
drawers: chipboard panels melamine-coated; ball
sliding telescopic guides
base: frame in black painted steel with feet in stainless
steel and plastic glides
Accessories and locks for cabinets see
page 123.
The cabinets are shipped assembled
with the exception of the models
WV051/WV052/WV055 that are shipped knocked-down.
Cabinets completely covered with
coach hide.
Locks only upon request.
WV020
cabinet with 2 doors and inner shelves
WV021DX
WV021DX / WV021SX
cabinet with 1 door with inner shelf and 2
high drawers:
door on the right - WV021DX
door on the left - WV021SX
WV022
cabinet with 4 high drawers
WV032
cabinet with 6 high drawers
width
cm (in)
depth
cm (in)
height
overall cm (in)
128 (50 3/8")
56 (22")
69 (27 1/8")
wood
finish
metal
finish
covers
PRICE
VAT excl.
CM
4.904,00
CU
5.525,00
WV021SX
128 (50 3/8")
128 (50 3/8")
192 (75 5/8")
56 (22")
56 (22")
56 (22")
69 (27 1/8")
69 (27 1/8")
69 (27 1/8")
CM
5.347,00
CU
5.968,00
CM
5.825,00
CU
6.452,00
CM
7.763,00
CU
8.605,00
CABINETS
135
Wave
coach hide.
width
cm (in)
depth
cm (in)
height
overall cm (in)
WV041
cabinet with 4 high drawers and 2 open
units with shelves
128 (50 3/8")
56 (22")
133 (52 3/8")
WV043
cabinet with 2 doors with inner shelves and
4 high drawers
128 (50 3/8")
WV051
cabinet with 2 doors with inner shelves, 2
drawers and 3 open unit with shelves
192 (75 5/8")
WV052
cabinet with 6 high drawers and 3 open
unit with shelves
192 (75 5/8")
56 (22")
56 (22")
56 (22")
133 (52 3/8")
133 (52 3/8")
133 (52 3/8")
CABINETS
136
page 123.
cover: coach hide
shelves: black lacquered medium density panels in the
unit with door and smoked glass 8 mm (3/8") thickness
in the open units
back of open unit: smoked mirror
wood
finish
metal
finish
covers
PRICE
VAT excl.
CM
7.613,00
CU
8.409,00
CM
8.292,00
CU
9.350,00
CM
9.898,00
CU
10.909,00
CM
10.806,00
CU
11.817,00
Wave
coach hide.
WV055
cabinet with 3 doors with inner shelves and
6 high drawers
page 123.
cover: coach hide
in the open units
width
cm (in)
depth
cm (in)
height
overall cm (in)
192 (75 5/8")
56 (22")
133 (52 3/8")
wood
finish
metal
finish
covers
PRICE
VAT excl.
CM
11.863,00
CU
13.253,00
CABINETS
137
Wave
Accessories.
cover: coach hide
in the open units
depth
cm (in)
height
overall cm (in)
WV108/110
minifridge 110 Volt (the price includes the
cabinet adjustment)
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.378,00
WV108/220
minifridge 220 Volt (the price includes the
cabinet adjustment)
45 (17 3/4")
48 (18 7/8")
47 (18 1/2")
1.378,00
60 (23 5/8")
36 (14 1/8")
10 (4")
WV110
sliding file holder
WV150
fixed file holder for high drawer
wood
finish
metal
finish
covers
PRICE
VAT excl.
width
cm (in)
263,00
263,00
WV200DX
single lock for right door
60,00
WV200SX
single lock for left door
WV200CSDX
multiple lock for 2 top superimposed right
high drawers
100,00
WV200CSSX
multiple lock for 2 top superimposed left
high drawers
CABINETS
138
Wave
Drawers units and low cabinets on
castors, coach hide covered doors
and drawers, black lacquared or
coach hide covered structure.
Doors and drawers with locking
device.
WV001
drawer unit with 2 drawers, file holder in
the lower drawer
WV002
drawer unit with 3 drawers
width
cm (in)
depth
cm (in)
height
overall cm (in)
43 (17")
56 (22")
53 (20 7/8")
43 (17")
WV003
door cabinet with inner shelf
WV004DX
cover: coach hide
frame: black lacquered or coach hide covered medium
density panels; black lacquered inner part
in rigid polyurethane foam, covered with coach hideshelves: black lacquered medium density panels
drawers: moulded and painted steel sheet and chipboard panels melamine-coated; ball sliding telescopic
guides
internal equipment of drawers: pelican drawer in
the upper drawer and file holder in the lower drawer
castors: revolving castors in nylon with rubber ring
ø 40 mm (1 5/8") 35 kg (lb 77,16) loading capacity each
86 (33 7/8")
56 (22")
56 (22")
53 (20 7/8")
53 (20 7/8")
wood
finish
metal
finish
covers
PRICE
VAT excl.
HN
CM
2.077,00
HN
CU
2.142,00
CM
2.390,00
CU
2.717,00
HN
CM
2.483,00
HN
CU
2.548,00
CM
2.789,00
CU
3.116,00
HN
CM
2.495,00
HN
CU
2.625,00
CM
3.200,00
CU
3.716,00
WV004SX
WV004DX / WV004SX
cabinet with 2 drawers and open unit with
shelf, with file holder in the lower drawer:
open unit on the right - WV004DX
open unit on the left - WV004SX
86 (33 7/8")
56 (22")
53 (20 7/8")
HN
CM
2.730,00
HN
CU
2.796,00
CM
3.325,00
CU
3.774,00
CABINETS
139
Wave
Drawers units and low cabinets on
castors, coach hide covered doors
and drawers, black lacquared or
coach hide covered structure.
Doors and drawers with locking
device.
cover: coach hide
frame: black lacquered or coach hide covered medium
density panels; black lacquered inner part
in rigid polyurethane foam, covered with coach hideshelves: black lacquered medium density panels
drawers: moulded and painted steel sheet and chipboard panels melamine-coated; ball sliding telescopic
guides
internal equipment of drawers: pelican drawer in
the upper drawer and file holder in the lower drawer
castors: revolving castors in nylon with rubber ring
ø 40 mm (1 5/8") 35 kg (lb 77,16) loading capacity each
width
cm (in)
WV005DX
wood
finish
56 (22")
53 (20 7/8")
HN
HN
covers
PRICE
VAT excl.
86 (33 7/8")
CM
CU
3.096,00
3.161,00
CM
CU
3.690,00
4.140,00
86 (33 7/8")
56 (22")
53 (20 7/8")
HN
HN
CM
CU
3.037,00
3.167,00
CM
CU
3.631,00
4.147,00
CM
CU
3.402,00
3.533,00
CM
CU
3.997,00
4.512,00
WV007SX
WV007DX / WV007SX
cabinet with 3 drawers and door with
inner shelf:
86 (33 7/8")
56 (22")
53 (20 7/8")
CABINETS
140
metal
finish
WV006SX
WV006DX / WV006SX
cabinet with 2 drawers and door with inner
shelf, with file holder in the lower drawer:
WV007DX
height
overall cm (in)
WV005SX
WV005DX / WV005SX
cabinet with 3 drawers and open unit
with shelf:
open unit on the right - WV005DX
open unit on the left - WV005SX
WV006DX
depth
cm (in)
HN
HN
Theatre
Doors and doorposts in wood covered with coach hide. Profiles in
stained solid wood.
cover: coach hide
frame: solid and multilayer wood
profiles: top profile, ledge and counterledge in solid wood, mat black lacquered
top closing element: black epoxy
painted aluminium profile
lock: type Patent or on request type
Yale
hinge: brass with chrome plated finish
handle: type Mixa by Colombo with
chrome plated finish, partially coach hide
covered
WIDTH
opening
THS21
door H. 210
with stain repellent treatment
Special sizes
upon request
For special doors, please specify overall sizes of
casing (L1, H1) and wall thickness (P).
Please specify when ordering, the opening of the door (DX right or SX left).
Installation is not included in the price
of the door.
covers
HEIGHT
casing
overall
opening
casing
overall
wall thick.
L
L1
L2
H
H1
H2
P
cm (in)
cm (in)
cm (in)
cm (in)
cm (in)
cm (in)
cm (in)
80
90
106
210
214
217
10
(31 1/2")
(35 1/2")
(41 3/4")
(82 3/4")
(84 3/8")
(85 1/2")
PRICE
VAT excl.
(4")
CM
CU
8.546,00
10.159,00
P
door opening right DX
H1
H2
H
door opening left SX
L2
L
L1
DOORS
141
Theatre
Doors and doorposts in wood covered with coach hide. Profiles in
stained solid wood.
cover: coach hide
frame: solid and multilayer wood
profiles: top profile, ledge and counterledge in solid wood, mat black lacquered
top closing element: black epoxy
painted aluminium profile
lock: type Patent or on request type
Yale
hinge: brass with chrome plated finish
handle: type Mixa by Colombo with
chrome plated finish, partially coach hide
covered
WIDTH
opening
THO21
door H. 210
with stain repellent treatment
Special sizes
upon request
For special doors, please specify overall sizes of
casing (L1, H1) and wall thickness (P).
Please specify when ordering, the opening of the door (DX right or SX left).
Installation is not included in the price
of the door.
covers
HEIGHT
casing
overall
opening
casing
overall
L
L1
L2
H
H1
H2
P
cm (in)
cm (in)
cm (in)
cm (in)
cm (in)
cm (in)
80
120
129
210
214
217
10
(47 1/4")
(50 7/8")
(82 3/4")
(84 3/8")
(85 1/2")
P
door opening right DX
H1
H2
H
door opening left SX
L2
L
L1
DOORS
142
wall thick.
cm (in)
(31 1/2")
PRICE
VAT excl.
(4")
CM
CU
9.421,00
11.086,00
Loomy
frame: aluminium grey epoxy painted
steel with vertical rods in chrome plated
steel.
Free standing screens in coach hide
with patented cutting.
PRICE
VAT excl.
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
LM105
free standing screen in coach hide with
patented cutting
104 (41")
40 (15 3/4")
180 (70 7/8")
CU
2.163,00
LM100
patented cutting
104 (41")
40 (15 3/4")
210 (82 5/8")
CU
2.283,00
ACCESSORIES
143
Glass tops
top: bevelled clear glass 15 mm
thickness, available on design
(5/8")
Tops prices per m2 refer to the maximun overall size.
Requested surface dimensions are from
a minimum of 1 m² (11 ft2) to a maximum
of 4 m2 (43 ft2).
Extra charges for tempered glass to
calculate on overall sizes:
Tops in clear glass on design.
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
PRICE
VAT excl.
CRI110
square or rectangular clear glass: price
per m2
1,5 (5/8")
851,00
CRI99
round or custom-shaped clear glass: price
per m2
1,5 (5/8")
949,00
ACCESSORIES
144
Deskpad
cover: coach hide
Minimum quantity: 5 pcs
Deskpad in customized size and shape,
price per m²:
CM : Euro 971,00 excl. VAT
CU : Euro 1.217,00 excl. VAT
A personal logo can be printed upon
request on deskpad.
Stitched deskpad in coach hide.
SM1
deskpad in coach hide with stitching
SM2
SM3
SM4
width
cm (in)
depth
cm (in)
height
overall cm (in)
covers
PRICE
VAT excl.
60 (23 5/8")
40 (15 3/4")
0,35 (1/8")
CM
153,00
CU
217,00
CM
198,00
CU
286,00
CM
248,00
CU
375,00
CM
115,00
CU
151,00
70 (27 5/8")
80 (31 1/2")
40 (15 3/4")
50 (19 3/4")
60 (23 5/8")
33 (13")
0,35 (1/8")
0,35 (1/8")
0,35 (1/8")
ACCESSORIES
145
T.Net
frame of free standing screen:
coach-hide covered steel
frame of hanging screen: fixing base
floor/ceiling: aluminium grey epoxy painted steel with lateral rods in stainless steel
with details in satined nickel
The hanging screen can be maximum
heigh of 400 cm and will be hanging in
tension: the wals and ceiling have to be
able to support this stress.
Free standing or hanging screen in
coach hide with patented cutting.
The free standing element can be a
maximum height of 250 cm.
width
cm (in)
depth
cm (in)
height
overall cm (in)
TN110
hanging screen in coach hide with patented
cutting (price per m2)
TN120
patented cutting (price per m2)
4 (1 5/8")
ACCESSORIES
146
covers
PRICE
VAT excl.
CU
853,00
CM
CU
978,00
1.097,00
Coach hide / Soft leather
Cuoio Miura (CM). Coach hide. It is produced from bullskin exclusively of European origin. The part normally used by Matteograssi S.p.A is the back, thickness is from 2,2
to 2,4 mm. It is chrome and vegetable tanned, dyed in the tub with pure aniline and finished with polyurethanic pigments.
Cuoio Classic (CU). Coach hide. It is produced from fullgrain cowskin exclusively of European origin. The part normally used by Matteograssi S.p.A is the shoulder, thickness
is from 3 to 4 mm. It is vegetable tanned, dyed in the tub with pure aniline and finished with aniline and semi-aniline depending on the colour.
Cuoietto (CS). Soft leather. Fullgrain cowskin exclusively European origin. Thickness is from 1,8 to 2,0 mm, obtained with chrome and vegetable tanning, dyed in tub with
pure aniline and finished with aniline. Available in the following colors: Nero, Testa di moro, Dune and Gesso
Pelle Soft (PS). Soft leather. Cowskin with thickness from 1,4 to 1,6 mm., obtained with chrome tanning, dyed in tub with pure aniline and finished with polyurethanic pigments.
Pelle Fire (PF). Soft leather. Cowskin with thickness from 1,1 to 1,3 mm., obtained with crome tanning, dyed in tub with pure aniline and finished with polyurethanic
pigments. Fire resistant leather "Classe 1".
Pelle Smooth (PT). Soft leather. It is produced from smooth grain cowskin of European origin with thickness from 1,0 to 1,2 mm. Obtained with chrome tanning, dyed
in the tub with pure aniline and finished with polyurethanic pigments.
Pelle Light (PL). Soft leather. Fullgrain cowskin of European origin with thickness from 1,4 to 1,6 mm., obtained with chrome and vegetable tanning. Dyed in the tub with
pure aniline and finished with aniline and semi-aniline depending on the colour.
Pelle Forest (PR). Soft Leather. Fullgrain cowskin exclusively European origin. Thickness is from 1,4 to 1,6 mm, obtained with chrome tanning, dyed in the tub with pure
aniline. Natural grain suede with manual forming.
High Quality (HQ): Pelle Sweet (cat. S). Soft leather. Fullgrain cowskin exclusively European origin, natural grain. Thickness is from 1,8 to 2,0 mm, obtained with chrome
and vegetable tanning, dyed in tub with pure aniline and finished with aniline.
Pelle Pure (cat. U). Soft leather.Fullgrain cowskin exclusively of European origin with smooth natural grain. Thickness is from 1,4 to
1,6 mm, obtained with chrome and vegetable tanning, dyed in tub with pure aniline.
,
Pelle Nabuk (cat. N). Natural grain cowskin, suede finish, exclusively European origin. Thickness from 1,1 to 1,3 mm, obtained with chrome tanning
dyed in the tub with pure aniline.
Prices upon request
Upon request stain repellent treatment is possibile on coach hide and soft leather.
CM
Cuoio Miura, coach hide supplied as complete skin
corresponding to approx.1,20 m² (13ft2)
PT
pelle smooth, soft leather supplied as complete
skin corresponding to approx5 m² (54 ft2)
CU
Cuoio Classic, coach hide supplied as complete
skin corresponding to approx.1,20 m² (13ft2)
PL
Pelle Light, soft leather supplied as complete skin
corresponding to approx. 5 m² (54 ft2)
CS
Cuoietto, soft leather supplied as complete skin
corresponding to approx.4/4,5 m² (43/49 ft2)
PR
pelle forest, soft leather supplied as complete
skin corresponding to approx 5 m² (54 ft2)
PS
Pelle Soft, soft leather supplied as complete skin
corresponding to approx.4/4,5 m² (43/49 ft2)
HQ
High Quality, soft leather supplied as complete
skin corresponding to approx. 5 m² (54 ft2)
PF
"Pelle Fire", soft leather supplied as complete skin
corresponding to approx 4/4,5 m² (43/49 ft2)
PRICE
VAT excl.
T.A.
stain repellent treatment for coach hide
and soft leather: charge per m²
71,00
COVERS
147
Cleaning
products
Basic maintenance set: including a
cleaning fluid Soft Cleaner 100 ml., a preservative cream Leather Cream 100 ml.
Soft Cleaner: soft cleaning fluid
Leather Cream: preservative cream
Strong Cleaner: strong cleaning fluid
Leather Vital: water proof preservative
cream
Colour: touch up cream; available only
for coach hide colours
Ink Away: ink, lipstick and pen stains
remover
Leather Degreaser: oil and grease
stains remover
Do not use maintenance products on
HQ leather and coach hide 'Naturale'
PRICE
VAT excl.
PM1
Basic maintenance set
(Soft Cleaner + Leather Cream)
77,00
PM2
Soft Cleaner 140 ml.
38,00
PM3
Leather Cream 140 ml.
40,00
PM4
Strong Cleaner 140 ml.
44,00
PM5
Leather Vital 140 ml.
48,00
PM6
Colour 50 ml.
please specify the colour required
31,00
PM7
Ink Away
44,00
PM8
Leather Degreaser 300 ml.
71,00
MAINTENANCE
148
(Prezzi in Euro) Settembre 2009
Notes
Notes
®
matteograssi spa
Via Monte Grappa 66/68
P.O. Box n.57 Paina
I - 20833 Giussano (MB)
Tel. +39 0362 86621
www.matteograssi.it - [email protected]

East End - MP Collections

Transcription

Similar documents

Rawlings 2017 Collection

home collection - MP Collections

A319 - Airbus

A321 - Airbus

A321 - Airbus