H22B Specification

H22B
Specification
H22B
Standard Features
Hydraulic
Operated Joysticks
• Pilot
Operation ISO pattern
• Joystick
PTO
Piping
with Stop Valves
• Boom Cylinder
Protection
• Circuit Identification
• Cushioned Cylinders
• Double Acting Hydraulic Circuit
•
Cab
Heater
• Adjustable
Seat
• PVC
Mat
• Floor
Seatbelt
• Integrated
Support
• Wrist
Harness for Light/Beacon
• Cab
• Ashtray
Power Socket
• 12V
Break Glass Hammer
• Emergency
Light
• Cab
• Pre-Wired for Radio Installation
Attachment
Arm
• Standard
Light
• Boom
• Boom Lowering Valve
Track
Specification
Machine weight
Pitch Rubber Tracks
• Short
Two-Speed
• Straight LineTravel
Travel
•
(Canopy - Rubber Tracks / Cab - Rubber Tracks)
kg
2080 / 2200
mm
4075 (4085) / 1380 / 2290
Dozer blade dimensions (width / height)
mm
1380 / 270
Bucket (capacity / width), std. ISO7451
m3/mm
0.06 / 450
Dimension (length / width / height)
Noise Level
Other
• Essential Tool Kit
Engine
Optional Extras
Cab
• Fabric Seat
Working
Range
Canopy
• FOPS & TOPS Compliant
Attachment
Arm
• Long
• Quick Hitch
Track
Crawler
• Steel
• Steel Crawler Pads
93/82
Model
–
MITSUBISHI L3E
Displacement
cc
952
Rated power
–
12.5kW / 17.0ps / 2400 rpm
Fuel tank capacity
litres
29
Max. digging depth (Std / Long)
mm
2365 / 2665
Max. digging height (Std / Long)
mm
3745 / 3940
Max. dumping height (Std / Long)
mm
2510 / 2700
Max. vertical digging depth (Std / Long)
mm
1780 / 2060
Max. digging radius (Std / Long)
mm
4065 / 4355
Max. reach at ground (Std / Long)
mm
3965 / 4260
Min. turning radius front (Std / Long)
mm
1750 / 1795
Rear turning radius
mm
1255
Min. turning radius swing (Std / Long)
mm
1385 / 1435
Boom swing angle (L / R)
Performance
Other
• Breaker
LwA / LpA
Hydraulic
System
degrees
L80 / R50
kN
16.3 / 13.7 (16.3 / 9.2)
Travelling speed (low / high)
km/h
2.2 / 3.8
Slew speed
min-1
11.5
–
Piston 2 + Gear 1
24.0 / 24.0 / 15.6
Max. digging power Bucket / Arm (Std / Long)
Pump
Type
Oil flow quantity
litres/min
PTO
Oil flow quantity
litres/min
48.0
Main relief pressure
MPa
18.6 / 18.6 / 17.2
Hyd. tank capacity
litres
33
Lifting Capacity (kgf) Standard Arm, Cab
Lifting point radius (2.5m)
Lifting point
Height (m)
www.hanixeurope.com
Over-front
Lifting point max radius
Over-front
Over-side
Blade Down
Blade Up
Over-side
Blade Down
Blade Up
m
2.0
338
338
338
330
330
330
3.1
0.0
470
566
498
359
359
328
3.3
-1.0
464
464
464
368
368
368
2.7
Hanix Europe Limited
Unit B, Alliance Industrial Estate, Windmill Lane, Denton
Manchester, M34 3SP. United Kingdom
MINI EXCAVATORS
Tel: +44 (0)161 335 2330 Fax: +44 (0) 161 335 2349
Email: [email protected]
We are constantly endeavouring to improve the performance of our Mini Excavator range.
We reserve the right to make alterations from time to time, and machine details may differ from those shown in this brochure.
Copyright: © Hanix Europe Ltd
H22B 10/10
Exceptional product reliability and integrity
~ the ultimate in Japanese craftsmanship
H22B
Wide excavating range and excellent breakout force with strength and stability
Serviceability & Safety
Low Environmental Impact
Operator-Friendly
•
•
Wider cabin door for easy
• operator
access and improved
•
•
•
Generously sized engine
compartment helps make light
work of daily checks.
All grease nipples are protected
against damage.
Plain flat cabin glass, bonded for
simple, quick replacement.
Work lights on boom and around
the machine for operation in dark
conditions.
•
•
Lean-burn fuel-efficient Mitsubishi
engine for minimal environmental
impact.
Emissions conform to Tier 4
(EPA) regulations.
Towable weight model reduces
fuel costs for transport.
Better Performance
operating range and
• Superior material handling
• Wider
over rough and uneven
stronger breakout force with
•
greater stability.
PTO stop valves allow quick
change of attachments.
•
ground.
Powerful travel motor for high
torque and high speed travel.
•
•
The Hanix H22B boasts a vertical
digging depth and digging force that’s
amongst the best in its class.
Compact and robust, the H22B has a long ‘X’ track frame for extra
strength and stability. It’s light enough to be easily transported and is
ideal for a wide range of digging applications. Its powerful, fuel
efficient engine combines with a variable output piston pump to
provide the operator with smooth power for all operations.
•
Long ‘X’ track frame with generous
ground clearance provides strength
and versatility in all conditions.
vision.
Spacious, comfortable cab with
conveniently located joystick
controls.
Natural air ventilation through
cab power air-flow vents and
sliding glass window.
Short pitch rubber tracks reduce
travelling noise and vibration.