LiteDisc® Family | Instruction Sheet LiteDisc

LiteDisc® Family | Instruction Sheet
LiteDisc
There are six sizes of LiteDisc:
NOTE: Some surface combinations are not available in every size.
Figure 1.
•
•
•
•
•
•
Figure 2.
12" (30cm)
22" (56cm)
32" (81cm)
42" (107cm)
52" (132cm)
41x74" Oval (104.14cm x 187.96cm)
LiteDisc reflectors are available in six surfaces:
• Translucent
• White/Gold Reversible
• White/Silver Reversible (not available in 52" & Oval")
• Soft Gold/White Reversible
• SunLite/White
• Silver/Gold Reversible
• Black/Silver Reversible (available only in 12" & 42")
Figure 3.
Figure 4.
Silver
SoftGold
Black
Gold
Translucent
SunLite
White
Opening and Re-Collapsing the LiteDisc
Figure 5.
Figure 6.
Figure 7.
Figure 8.
1. Remove the LiteDisc from the protective carry bag.
2. The LiteDisc is twisted and collapsed to fit into the carry bag.
Slowly and carefully unfold it until it is completely open.
3. To collapse the disc for storage, place one hand up and one
hand down on opposing edges of the disc.
4. Twist one hand toward the other.
5. Continue twisting, folding one side over the other.
6. The LiteDisc will now resemble three hoops.
7/8.The collapsed LiteDisc can now be sized to properly fit back into the bag.
12"
41x74" L
i
teDi
sc O
val
22"
32"
42"
52"
For detailed specifications, product tutorial videos and more, please visit www.photoflex.com
You can use a LiteDisc to enhance your photos
In the studio
For shooting nature
Diffuse light indoors or outside
Available LiteDisc Fabric Colors
Available Accessories
•
•
Translucent fabric diffuses light and
produces a broad light source with a
softening effect.
LiteDisc Holder Item #DL-BHOLDER
LiteDisc Holder Compact Item #DL-BHLDRCOMP
White: Use to reflect light with natural
looking results.
Gold: Use for a strong warming effect in
your lighting.
DL-BHOLDER
Extended length 69.5"/176.5cm
Collapsed length 39.5"/100.4cm
DL-BHOLDERCOMP
Extended length 50"/127cm
Collapsed length 28.5"/72.4cm
39.5"
up to 69.5"
28.5"
up to 50"
White: Use to reflect light with natural
looking results.
Silver: Use to increase specular highlights
adding more contrast to your image.
SunLite Fabric: The SunLite surface will
bounce direct sunlight or harsh studio light
onto your subject without the blinding
effect of the highly reflective mylar®
surfaces. It uses a silver/gold cross hatch
design
Gold: Use for a strong warming effect in
your lighting.
Silver: Use to increase specular highlights
adding more contrast to your image.
Customer Support (831) 786-1370
E-mail: [email protected]
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. LiteDisc®, Photoflex® and the Photoflex logo are
trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S.
and other countries.
PHOTOFLEX® WARRANTY
• Warranties only cover manufacturer’s defects and workmanship.
• We reserve the right to inspect all merchandise returned (end users and dealers) for warranty fulfillment.
•
•
•
•
All returns must be pre-approved with Return Manufacturers Authorization obtained from Photoflex/PromarkBRANDS.
A receipt showing date of purchase will be required for all returns.
Freight must be paid by the customer or dealer.
Warranties are valid only from date of Original Purchase.
For detailed specifications, product tutorial videos and more, please visit www.photoflex.com
Black: Use as a flag to block light,
sometimes referred to as "negative fill".
Silver: Use to increase specular highlights
adding more contrast to your image.
Soft Gold: Use for natural-looking, warmer
reflected light. Soft Gold combines silver
and gold in a zig-zag pattern for a warm,
summery feel that works great with skin
tones.
White: Use to reflect light with natural
looking results.
Rev 9/2016