5 wheel and tire service equipment - Snap

5
WHEEL AND
TIRE SERVICE
EQUIPMENT
5
2006/2007 SECTION 5
PROVIDE TOYOTA
DEALERS WITH:
• One-stop shopping.
• Easy-to-use program
materials.
• A reliable source of
product information.
• A simple ordering
process.
BRAKE BLEEDING/
FLUSHING SYSTEM
SUPPLIED BY: VACULA
DrainTwin
Model No. CEJ120188368
The Vacula “DrainTwin” is a pressure brake bleeder and flusher.
The revolutionary state-of-the-art pulsing/diaphragm pneumatic
pump and drip-free couplers make this equipment the most effective, safe and efficient way of bleeding or flushing. Enjoy the
versatility of either pressure or vacuum bleeding of the brake
system with the flip of a switch. This new product is loaded with
features to handle any job.
Features:
• Pneumatic diaphragm pump creating pulsing pressure or a
vacuum for thorough bleeding/flushing.
• Runs entirely on compressed air.
• Refilling/suction gun for use in master cylinder reservoir
— conveniently removes fluid in vacuum mode and refills in
pressure mode.
• Includes sediment filter for refilling/suction gun.
• Includes (3) Toyota adaptors.
• Comes with security shutoff float on fluid supply pickup tube.
• Adjustable bleeding pressure 0 – 42 p.s.i. (2.9 bar).
• Extra long fluid hose for use while vehicle is on a lift.
• Heavy-duty, high quality Vacula construction.
• Built-in storage compartments for new fluid supply, discharge
canister and accessories.
Accessory:
CEJ120188508 (7) piece DrainTwin deluxe adaptor kit for
non-Toyota vehicles. Fits most foreign and
domestic, passenger, light truck and SUV.
• The highest level of
customer service and
follow-up.
• Competitive leasing,
at a competitive price.
CEJ120188368
TO ORDER CALL: 1.800.368.6787
5-1
CEJ120188508
TO ORDER FAX: 1.800.892.9651
5-1
OUR
MISSION
WHEEL AND TIRE SERVICE EQUIPMENT
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
BRAKE BLEEDERS
SUPPLIED BY: VACULA
Complete Drainman Brake Bleeder
Model No. CEJ18-9989
With compressed air, the built-in Venturi system creates a powerful vacuum that is used to bleed or flush hydraulic brakes or
clutches. The large-size tripod canister gives the bleeder excellent stability to allow operation from the shop floor. The canister
drain valve makes emptying it easy without disassembly.
Features:
5-2
• Universal use with no special adaptors necessary.
• Closed system for fast, clean and comfortable one-person
operation.
• For use on conventional, ABS and large-size hydraulic
systems.
• Canister drain valve allows quick and clean disposal of contaminated fluid without disassembly.
• Mark lll Refiller keeps master cylinder reservoir filled automatically during the bleeding process.
• Extended leg on canister for storage of Mark lll Refiller.
Specifications:
• Working pressure: 80 – 175 p.s.i. (5.5 – 12 Bar)
• Maximum air consumption: 4.6 c.f.m./87 p.s.i. (130 liter/
minute/6 Bar)
• Temperature range: -4 – 140° F (-20 – 60° C)
• Canister volume: 2.6 quarts (2.5 liter)
Deluxe Brake Bleeder Kit
Model No. CEJ18-9071
With compressed air, the built-in Venturi system creates a powerful vacuum that is used to bleed and flush hydraulic brakes
or clutches. The canister can be vacuum charged, allowing
bleeding when disconnected from the air source. It also can be
operated from the shop floor because of the 10' bleed hose.
The internal drain valve makes emptying of the canister quick
and easy. Also comes with (2) probes which interchange in the
bleed hose for easy vacuuming of master cylinder reservoirs of
any contaminated fluid.
Features:
• Closed system for one-person bleeding operation, saving
labor costs while eliminating need for costly adaptors.
• Works also on ABS and large-size hydraulic systems.
• Canister can be vacuum charged and operated portably.
• Comes with (2) probes for vacuuming of the master cylinder
reservoir and the universal bleed adaptor for bleeding.
• Universal drain valve for clean, safe disposal of fluid without
disassembly.
• Automatic refilling of master cylinder reservoir while bleeding.
• Optional clutch bleeding kit.
Specifications:
• Drainman vacuum bleeder
• 10' bleed hose with universal rubber connector
• Mark lll Refiller bottle with mounting bracket
•
•
•
•
•
•
Option:
Option:
Includes:
CEJ188888
Clutch bleeding kit — flat and round top
adaptors with refiller bottle for reverse clutch
bleeding.
CEJ188888
CEJ18-9989
TO ORDER FAX: 1.800.892.9651
Working pressure: 80 – 120 p.s.i.
Maximum air consumption: 4.6 c.f.m.
Air connection: 1/4" NPT
Canister volume: 3.7 qts.
Bleed hose: 10' in length
Temperature range: -4 – 140° F (-20 – 60° C)
Clutch bleeding kit — flat and round top
adaptors with refiller bottle for reverse clutch
bleeding.
CEJ18-9071
5-2
TO ORDER CALL: 1.800.368.6787
WHEEL AND TIRE SERVICE EQUIPMENT
ON-CAR BRAKE LATHES
SUPPLIED BY: ACCU INDUSTRIES, INC.
On-Car Caliper Mount Brake Lathe Package
Model No. ACCTOYOCLPKG
On-Car Caliper Mount Brake Lathe
Model No. ACC8820
Features:
Features:
• Provides fast, easy and accurate machining.
• No dial indicators or compensation adjustment required.
• Quick-mount adaptors cut mounting time in half.
Specifications:
•
•
•
•
•
Maximum rotor width: 1.57" (40 mm)
Drive unit: 1/2 hp; 110 volt; 60 Hz
Feed speed: .0042" per revolution
Lathe weight: 14.9 lbs. (6.77 kg)
Shipping weight: 123 lbs. (55.9 kg)
Includes all
Toyota
Adaptors and
Cutting Tips
Includes:
• ACC8800
On-car lathe, drive unit and universal
slide mount.
• ACC877040
4x4 drive yoke.
• ACC878051
Carbide inserts (10 pk.).
• Quick-mount adaptors:
ACC878036
SK-520 For Supra.
ACC878037
SK-522 For Celica, RAV4.
ACC878046
SK-533 For Landcruiser/Tundra.
ACC878047
SK-524 For Camry, Avalon.
ACC878048
SK-513 Handnuts.
ACC878039
SK-523 For 4Runner, T100.
ACC878045
SK-529 For Previa.
Accessories:
ACC876308
ACC876318
NEW
FOR
06
• Completely eliminates run-out, disc thickness variation (DTV)
and excessive brake noise.
• Saves dismantling, reassembly and adjustment of the brake
disc.
• Guarantees perfect adjustment between the brake pads and
brake discs.
• Can be used everywhere, both on a lift or on the ground.
• Assemble on the brake caliper ears with Universal Slide
Mounting.
• Fits 99% of all passenger cars and light commercial vehicles
with or without ABS.
Specifications:
•
•
•
•
•
•
Disc oscillation: <20µm/<0.02 mm/<0.0008"
Thickness variation: <20µm/<0.02 mm/<0.0008"
Surface roughness: <2µm/<0.002 mm/<0.00008"
Maximum brake disc thickness: 41 mm/1.73"
Maximum cutting depth: 0.2 mm per bit/0.0008"
Working height: 1020 – 1370 mm, adjustable/40 – 54"
LS430 adaptor
LS430 adaptor pins/spacers
On-car lathes, drive units and adaptors available
separately.
ACC8820
Toyota warranty requires use of an on-car disc
lathe for all front rotor turning operations.
TO ORDER CALL: 1.800.368.6787
5-3
TO ORDER FAX: 1.800.892.9651
5-3
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
ON-CAR BRAKE LATHE/TORQSTIK
SUPPLIED BY: PRO-CUT INTERNATIONAL
Computerized On-Car Hub Mount Brake Lathe
Model No. PCIPFM90
Features:
5-4
• Highest speed available; single pass cut provides the best
results in the shortest amount of time.
• Superior surface finish results with NO variation due to
altering speed like other machines.
• Huge, 1.0 hp continuous-duty motor offers high torque
— especially useful for truck work.
• The only “true” Computerized Compensating machine
— push one button and you’re done.
• Now, with heavy-duty gear box design for reduced chatter,
improved finishes and minimal maintenance.
• Completely redesigned trolley has larger wheels, square
tube design and split block clamp system which all help to
offer increased stability, durability and usability on a variety
of lift configurations including drive-on style.
• Premium one-piece balanced adaptors speed up operation
time and are extremely durable under harsh shop
conditions.
• Includes everything needed to get you started on creating
higher profits and providing the best brake work possible!
Includes:
•
•
•
•
•
•
Direct-fit 4-lug adaptor.
Direct-fit 5-lug adaptor.
Direct-fit 5- and 6-lug adaptor.
Pickup and 4x4 adaptor.
Mounting trolley with chip tray.
Accessory package containing: Training video, manual, lug
nut kit, large and small adaptor spacers, complete tool kit
and (1) box of cutting tips.
Option:
PCI50681
Accessories:
PCI50742
PCI50687
PCI50-688
PCI50695
PCI50691
TorqStik
Increase shop efficiency, eliminate damage by impact wrenches. TorqStik is the cost effective way to accurately torque wheel
nuts. Innovative technology guarantees accuracy every time;
nothing to calibrate or maintain. No more damaged wheels or
studs.
Features:
•
•
•
•
Eliminates broken or damaged studs.
Prevents damage to alloy wheels.
Prevents rotor distortion.
Color coded chart is simple to use.
Models:
Sets:
PCIPATSETC
PCIPATSET10
Individual:
PCIPAT1755
PCIPAT2160
PCIPAT1965
PCIPAT1780
PCIPAT1980
PCIPAT2180
PCIPAT19100
PCIPAT13100
PCIPAT78120
PCIPAT78140
TorquStik 8 Set — includes (8) sticks, (2) flip
sockets, chart and molded case
TorqStik 10 Set — includes (10) sticks, (2)
extra 7/8" sockets, (2) flip sockets, chart and
molded case
17 mm 55 ft.-lbs. Green
21 mm 60 ft.-lbs. Black
19 mm 65 ft.-lbs. Yellow
17 mm 80 ft.-lbs. Red
19 mm 80 ft.-lbs. (3/4) Blue
21 mm 80 ft.-lbs. Orange
19 mm 100 ft.-lbs. (3/4) Gray
13/16 100 ft.-lbs. Dark Brown
7/8 Hex (22 mm) 120 ft.-lbs. White
7/8 Hex (22 mm) 140 ft.-lbs. Aqua
WARRANTY: One year limited.
Landcruiser adaptor necessary for machining
rear rotors on 1997 and up models.
Replacement cutting tips, (10) per box
Direct-fit 4-lug adaptor
Direct-fit 5-lug adaptor
Direct-fit 5- and 6-lug adaptor
Pickup and 4x4 adaptor
PCIPATSET10
24-hour parts promise … If there’s ever a
problem, Pro-Cut guarantees that we’ll diagnose the problem and have a part sent out to
you within 24 hours (or the part is FREE.)
PCIPFM90
Toyota warranty requires use of an on-car disc
lathe for all front rotor turning operations.
TO ORDER FAX: 1.800.892.9651
5-4
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
BRAKE LATHE PACKAGES
NEW
FOR
SUPPLIED BY: HUNTER ENGINEERING
Models:
Hunter OCL400 On-Car Hub Mount Brake Lathe
06
Bringing machine tool precision to on-car rotor refinishing,
Hunter’s OCL400 on-car rotor lathe effectively
eliminates pedal pulsation comebacks while increasing
productivity in the brake shop.
Features:
• NEW! Anti-Chatter Technology (ACT) feature oscillates the
spindle speed to prevent the buildup of vibration (chatter)
that is common on all single-speed lathes.
• Unique ServoDrive™ system allows technicians to resurface
rotors at the fastest speed possible and also vary the speed
on the fly to keep complete control while maintaining a superior surface finish.
• Pro-Comp™ computerized compensation was developed
from proven Hunter alignment sensor compensation
technology.
• Powerful 1.5 hp high torque motor easily handles any vehicle
from passenger cars to 1-ton trucks.
• Control module pivots to keep the panel display reading right
side up no matter which way the lathe is rotated.
• Intermittent tool feed produces a nondirectional cutting
pattern of interrupted arcs, which eliminates radial pushout
effect that continuous feed units present.
• Large, rigid tool holders service rotors up to 15.75" in diameter and up to 2.75" in thickness.
• Micro-round cutting inserts remove up to .040" per side in
one pass.
Combination, variable speed brake lathe
with standard accessories
HUNBL505D
HUNBL505 with Digi-Cal Auto Measurement system
HUNBL505A*
HUNBL505 with HunterPro accessories
HUNBL505DA*
HUNBL505A with Digi-Cal Auto Measurement system
HUNBL505-B
HUNBL505 with bench, backboard, chip
tray, storage hooks and standard
accessories
HUNBL505DB
HUNBL505-B with Digi-Cal Auto Measurement system
HUNBL505AB*
HUNBL505-B with HunterPro accessories
HUNBL505DAB*
HUNBL505AB with Digi-Cal Auto Measurement system
*Models with HunterPro accessories require a selection of
adaptor kit to complete the HunterPro package.
Adaptor Kits:
HUN2016651
HUN2016661
HUN2016671
HUN2016681
HunterPro Brake Lathe Packages
A HunterPro brake lathe package includes a BL505 combination brake lathe and the choice of adaptor kits to customize the
lathe to match the service profile of your shop.
HunterPro Level 1 – Adaptors for most
passenger car rotors, drums and flywheels,
including composites
HunterPro Level 2 – Adaptors for most passenger car and light-duty truck rotors, drums
and flywheels, including composites
QuickChuck Level 3 – Three-jaw chuck
mounting system with adaptors for most passenger car, light-duty and medium-duty truck
rotors, drums and flywheels
HunterPro Level 4 – Adaptors for most
passenger car, light-duty and medium-duty
truck rotors, drums and flywheels, including
composites
Features:
• Unique design allows the operator to change the setup from
rotors to drums and vice versa with unprecedented ease and
speed.
• Infinitely adjustable feed rate provides a dial-in fast rate for
rapid material removal, very slow for final surface finish or
any rate in between to perform one-cut passes.
• (3) easy-to-access spindle speeds allow the correct speed
for all size workpieces. No tools are required to change
speeds.
• Optional HunterPro Wrenchless Self-Aligning Arbor Nut allows for quick setup while removing the risk of overtightening
and minor mounting errors.
• Optional Digi-Cal Auto Measurement displays depth of cut
for rotors and drums and also measures thickness, drum
diameter and total indicated run-out of the workpiece.
Hunter has additional brake lathes and accessories available.
Call your Approved Dealer Equipment representative for more
information about models and pricing.
TO ORDER CALL: 1.800.368.6787
HUNOCL400TL
Toyota warranty requires use
of an on-car disc lathe for all
front rotor turning operations.
5-5
HUNBL505DAB with
HunterPro Level 4
adaptor kit and optional
storage drawer
TO ORDER FAX: 1.800.892.9651
5-5
HUNBL505
Model No. HUNOCL400TL
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
COMBINATION BRAKE LATHE AND ACCESSORIES
SUPPLIED BY: AMMCO
Combination Drum/Disc Brake Lathe
Model No. AMM4000B
AMMCO Environmental Lathe Enclosure
Model No. AMM2800
Features:
Features:
5-6
• Infinitely variable spindle feed from 0.002 – 0.02" per
revolution.
• Quick-change two-speed pulleys for optimum r.p.m. selection.
• Rigid 44 lb. spindle for precision and durability.
• Extra large bronze bearings support the spindle.
• Converts from drum to rotors in less than 30 seconds.
• One-cut capability.
• Does not include adaptors.
• Spindle speed: 100, 200 r.p.m.
• Rotor diameter: Up to 13" (33.02 cm) with AMM6950 twin
cutter, up to 17.4687" with AMM6950 and optional AMM6936
cross feed extension, up to 22" with optional AMM7900 twin
cutter
• Rotor width: Up to 1.69" (4.32 cm) with AMM6950 twin cutter,
up to 4" with optional AMM7900 twin cutter
• Drum diameter: 6 – 28" (15.24 – 71.12 cm)
• Drum depth: Up to 6.75" (17.15 cm)
• Motor: 1 hp motor; additional motors available
Accessories:
AMM41053
AMM41054
AMM941055
AMM2500A
AMM9310
AMM9313
Toolboard and light canopy
Side cabinet
Brake lathe toolbox bench
Lathe bench
Adaptor, composite set, car
Adaptor, composite set, truck,
3/4- and 1-ton drums
Toyota warranty requires
use of an on-car disc
lathe for all front rotor
turning operations.
AMM4000B
Shown on
AMM941055 brake
lathe toolbox bench
with AMM41054
side cabinet and
AMM41053 toolboard
and light canopy.
TO ORDER FAX: 1.800.892.9651
06
Provides a cleaner environment
with added safety, convenience and
reduced noise.
The top choice of serious service professionals the world over
for more than 25 years. AMM4000 has a proven reputation as
the industry “workhorse” — for quality, precision and durability.
Specifications:
NEW
FOR
• Fits most brake lathes.
• Adds safety by enclosing the
brake lathe. A large window
allows the user to monitor the
operation.
• A quiet, 110 c.f.m. fan changes
the air in the enclosure approximately twice a minute.
• An automotive-type filter collects
AMM2800 shown
the micro dust. Does not require a
with AMM4000B
shop vacuum. With the cover closed,
operation is 19 dB less than a typical lathe and bench.
shop vacuum.
• Metal chips fall on the “sink” area, out through a tube at the
bottom hole and into a 5 gallon bucket for easy disposal.
• When open, the top is out of the work area but does not
extend past the back of the unit.
• A tool board and molded shelf are provided on the inside
back wall of the enclosure.
• Made of polyethylene plastic for an attractive and durable
unit.
AMMCO Double Chuck™
Model No. AMM940921
NEW
FOR
06
Simplify hubless rotor and drum machining.
Features:
• AMMCO’s Double Chuck Kit has (2) sets of concentric, expanding jaws to grip the center-hole and eliminate the need
for cones.
• Passenger car jaws are permanently mounted on one side
and truck jaws are permanently mounted on the other side.
No need to change out jaws.
• Only (5) pieces to choose, to store and to maintain.
• Handles virtually all hubless drums and rotors (including
composite) through 1-ton vehicles. (Range: 2.125 – 5.75").
• Kit includes Double Chuck, (3) backing plates and
chuck key.
• Fits any 1" lathe arbor.
AMM940921
5-6
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
BRAKE WASHER/ADAPTOR SETS
Adaptor Sets for Brake Lathes
Models:
Current OSHA Regulations (29 CFR 1910.1001) concerning
airborne asbestos in the workplace requires shops doing (6) or
more brake repairs or inspections per week to use an “OSHA
Preferred Method” for controlling brake dust.
AMM900001
AMM900002
AMMCO® brake washers are ergonomically designed for the
ultimate in convenience, and they are built to the highest
AMMCO quality standards for outstanding longevity.
Features:
AMM900003
• “OSHA Preferred Method” low-pressure/aqueous-based wet
cleaning.
• Finer standard filtration than competitive models.
• Optimized nozzle for dust control.
• Flow-thru brush thoroughly washes down brake
assemblies.
• Oil boom collects oil and grease.
• Highly effective water-based cleaning solution is
biodegradable.
• Oversized 24" x 24" x 8" (deep) basin minimizes mess and
maximizes dust control.
• Handy rugged stainless steel small parts basket.
• Preset and tamper-proof air pressure regulator controls
incoming air supply.
• Lid doubles as drain pan for alignment rack runway use.
• Easy disposal of liquid and solid waste.
• Standard equipment air supply filter removes water; coalescing filter removes oil to maximize pump life.
• Low-pressure pneumatic pump offers convenience and durability while eliminating electric hazards.
• Durable polyethylene construction of drain pan, lid, base and
reservoir.
• Lower operating costs compared to spray solvents.
• 10-gallon capacity provides long service cycle
between refills.
• Competitively priced.
AMM90005
AMM909310
AMM909313
AMM940921
Includes hub and hubless adaptors for most
cars, including composites
Includes hub and hubless adaptors for most
cars, including composites and light
trucks to 1/2-ton
Includes hub and hubless adaptors for most
cars, including composites and light trucks to
1-ton
Passenger car through 3/4 and 1-ton truck
– deluxe quick chuck
ADAPTEK adaptor set — passenger car and
light truck up to 1/2-ton
ADAPTEK adaptor set — passenger car and
light truck up to 1-ton
Double chuck passenger car and light truck up
to 1-ton
Adaptor sets used with AMM3850B, AMM3860B, AMM4000B,
AMM4100B, AMM7500B.
Includes:
Set 1
AMM
900001
Set 2
AMM
900002
Set 3
AMM
900003
Set 4
AMM
90005
AMM9232
1
1
1
1
AMM3125
1
1
1
1
AMM9492
1
1
1
1
AMM9311
1
1
1
Adaptor
Set
AMM9310
AMM9233
1
AMM9313
1
AMM940921
1
1
AMM909313
AMM909310
AMM1450
AMM940921
TO ORDER CALL: 1.800.368.6787
5-7
TO ORDER FAX: 1.800.892.9651
5-7
Deluxe Brake Washer
Model No. AMM1450
SUPPLIED BY: AMMCO
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
BRAKE LATHES
Brake Lathe
Model No. ACC8922L
SUPPLIED BY: ACCU INDUSTRIES, INC.
Accessories:
ACC8010
ACC8020
Features:
5-8
• Positive rake, one pass, finishing capability saving time and
improving your return on investment.
• True machine shop construction; dovetail ways and adjustable gibbs design ensures factory tolerances for the life of
the lathe.
• Tapered roller bearing spindle design for maximum longevity
• 470 lb. casting mass absorbs transient vibrations.
• Independent high performance AC Servo motors handle
feed requirements, 1 hp exterior drive motor handles arbor
requirements.
• Lathe requires (1) of the adaptor packages listed under
accessories.
ACC8030
ACC8040
ACC8939
Bronze adaptor package for passenger cars and
some light trucks
Silver adaptor package for passenger cars and
composite rotors/drums
Gold adaptor package for passenger cars, composite and light trucks thru 1/2 ton
Platinum adaptor package for passenger cars,
composite and light trucks thru 1 ton
Deluxe brake lathe bench
Specifications:
Model No.
Rotor capacity
Maximum surface width
Maximum thickness
Drum capacity
Depth of cut
Brake Lathe
Model No. ACC8944L
Capacity
Features:
• Infinitely adjustable rotor feed speed and (3) selectable arbor
speeds provide unmatched machining versatility.
• Positive rake, one pass finishing capability saves time and
improves your return on investment.
• True machine shop construction; dovetail ways and adjustable gibbs, ensures factory tolerances for the life of the lathe.
• Tapered roller bearing spindle design for maximum longevity.
• 475 lb. casting mass eliminates transient vibrations.
• Independent high performance DC Servo motors handle
feed requirements.
• Lathe requires (1) of the adaptor packages listed under
accessories.
Friction surface capacity
Spindle speed
Feeds per revolution
Rotor
Drum
ACC8922L
4 – 24"
4-1/2"
2-1/4"
6 – 28"
6"
ACC8944L
4 – 24"
4-1/2"
2-1/4"
6 – 28"
6"
6 – 24"
6 – 24"
6"
6"
105 r.p.m.
100, 150,
200 r.p.m.
0.0030"
0.0046"
0.001 – 0.010"
0.0015 – 0.015"
ACC8944L Shown
with optional
ACC8939 Deluxe
Lathe Bench and
ACC8010 Bronze
Adaptor Kit.
ACC8922L Shown
with optional
ACC8939 Deluxe
Lathe Bench and
ACC8010 Bronze
Adaptor Kit.
TO ORDER FAX: 1.800.892.9651
Toyota warranty requires use of
an on-car disc lathe for all front
rotor turning operations.
5-8
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
BEARING SERVICE SET/STRUT SPRING COMPRESSOR
SUPPLIED BY: OTC, SPX CORPORATION/BRANICK
Features:
NEW
FOR
06
• Works on virtually all floating and trapped rotors found on
domestic and import vehicles.
• Fits behind the rotor. Pushes on the steering knuckle,
not the rotor.
• Eliminates the need to remove the knuckle assembly.
No need for a shop press or unnecessary front end
alignments.
• Puller and adaptor improved with addition of a beveled edge
for easier use in tight fit applications.
• Impact wrench compatible.
• Updated case and application information.
Strut Spring Compressor
Model No. BRN7200
Features:
• Increased capacity — handles larger struts and models with
additional bracketing or suspension components. 5" more
stroke (24" total), compresses down to 2".
• “Floating” compression head — increased angular range
for the new suspension systems. Patented design actually
adjusts itself to the correct angle.
• Extended handles — requires less effort, a real benefit on
those big springs.
• Three-point upper hooks — allow for uniform compression of
the spring.
• Three-point lower hooks — incremental adjustment for uniform compression of the spring. “Common center” compression hooks easily fit between tightly wound coil springs.
NOTE: ’05-0047 RAV4 adaptor and BRNM-ST710 spring
clamps are available through your SST program.
OTC6537
BRNMST728
BRN7200
TO ORDER CALL: 1.800.368.6787
5-9
TO ORDER FAX: 1.800.892.9651
5-9
HubTamer Elite Bearing Service Set
Model No. OTC6537
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
TIRE CHANGER
SUPPLIED BY: JOHN BEAN COMPANY
EHP System V Tire Changer
Model No. EEWH517A
Features:
NEW
FOR
06
5-10
• Clamping capability from the outside up to 26" (extension
capability to 30" from outside with optional accessories).
• Maximum rim width 16".
• Double acting bead breaking cylinder.
• Bead breaker adjustable in (2) positions.
• Bead breaker with robust, anti-skid contact pad.
• Over-size bead breaking blade.
• Pneumatically controlled movement of the mounting head
towards the rim.
• One-piece mounting head is vertically and laterally adjustable in spaced-apart position relative to the rim.
• Mounting head is equipped as standard with a plastic
protection in the nose.
• Mounting column, pneumatically hinged to the rear upon
pedal operation.
• Self-centering four-jaw chuck with two clamping cylinders.
• Inner part of the jaw is equipped with a plastic protection for
the rim.
• Dedicated storage for quick exchange device.
• Foot operated inflation gauge.
• Table inflation with outside tank.
• Standard quick exchange device.
• Pneumatic bead assist MH 320 (extended version) as
standard.
• Capable to handle run flat tires EMT, DSST, RFT, Eufori@,
ZeroP, SSR.
• Capable to handle CSR and PAX using a CSR or PAX
adaptor for the MH 320.
EEWH517A
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Outer clamping range: 12 – 26" with +4 jaws 16 – 30"
Inner clamping range: 14 – 28"
Maximum rim width: 16" (406 mm)
Maximum wheel width: 17" (440 mm)
Maximum wheel diameter: 47" (1200 mm)
Maximum bead breaking width: Position 1: 60 – 305 mm
(2-1/2 – 12")
Position 2: 150 – 675 mm (6 – 16-1/2")
Chuck speed (r.p.m.): 6
Number of pedals: 4
Bead breaker power at: 3,307 lbs.
Electrical requirement: 115 volt/ 1 phase/ 60 Hz
Air requirement: 110 – 170 p.s.i.
Recommended floor space: 72" w x 78" d
Shipping weight: 590 lbs.
TO ORDER FAX: 1.800.892.9651
5-10
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
TIRE CHANGERS
SUPPLIED BY: JOHN BEAN COMPANY
Accessories:
Enhanced High Performance Tire Changers
• Economy swing arm design, reduces floor space and
simplifies operation.
• Automatic air lubricator and water filter (standard) for
reduced wear and longer life.
• Replaceable nylon mount/demount head inserts provide
“non-scratch” tire changing assurance.
• Integrated inflation bead seating jets “in the clamps” for
maximum inflation power.
• (2) turntable clamping cylinders for greater and more even
clamping power.
Models:
EEWH512AE
EEWH514AE
Options:
EAA0270J14A
EAA0270J11A
EAA0270J12A
EAA0270J13A
JBC4025966
JBC87479
JBC66735
JBC4024078
EEA0247G19A
EAA0247G20A
Bead pressing roller
Jaw protector kit
Bead holding clamp
Tire bead clamp
Quick change mount/demount head kit
Plastic mount/demount replacement head
5-11
Features:
Expanded range — rim capacity 24" x 12"
Expanded range — rim capacity 24" x 15"
Safety restraint arm kit — use with
EEWH512AE
Safety restraint arm kit — use with
EEWH514AE
MH310 pneumatic bead assist — use with
EEWH512AE
MH320 pneumatic bead assist — use with
EEWH514AE
Specifications:
EHP SYSTEM III
EEWH512AE
EHP SYSTEM IV
EEWH514AE
110 – 170 p.s.i.
110 – 170 p.s.i.
3,300 lbs.
@ 170 p.s.i.
3,300 lbs.
@ 170 p.s.i.
Bead breaker opening
3 – 13"
3 – 16"
Electrical requirements
110 volts/60 Hz,
1 phase
110 volts/60 Hz,
1 phase
12"
40"
12 – 24"
10 – 24"
548 lbs.
No
Yes
Yes
15"
40"
12 – 24"
10 –24"
567 lbs.
Yes
Yes
Yes
Model No.
Air pressure required
Bead breaker force
Maximum rim width
Maximum tire diameter
Rim clamping capacity – inside
Rim clamping capacity – outside
Shipping weight
Pneumatic tilt tower
Pneumatic bead assist option
Safety restraint air option
EEWH512AE
EEWH514AE
Shown with optional
safety restraint arm.
TO ORDER CALL: 1.800.368.6787
5-11
TO ORDER FAX: 1.800.892.9651
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
TIRE CHANGERS
SUPPLIED BY: HUNTER ENGINEERING
Specifications:
Hunter TC3500 and TC3250 Tire Changers
•
•
•
•
The exclusive features of Hunter’s TC3500 and TC3250 assist
technicians to easily and safely change the world’s toughest
new performance tires.
Features:
5-12
• Exclusive “tulip” wheel clamping system exerts uniform
clamping strength, eliminating spinning and scoring damage
to wheels.
• Reciprocating multipiston air motor generates a high torque,
bidirectional 360° rotation, requires no electrical hookup and
is extremely quiet.
• Tilted ergonomic design and unique clamping system allow
unobstructed lower bead access.
• Floating three-point articulated mounting arm is faster and
easier to use than any other design and allows the exclusive
polymer mounting head to follow the rim without damage,
even when servicing difficult low profile tires and run flats.
• Heavy-duty spring-loaded wheel support adjusts the wheel
to the desired work height and lifts the tire to the operator on
release.
• TC3500’s exclusive hydraulic bead-loosening roller system
gently rolls tires off or on rims. With the simple two-finger
control, a technician can safely hold the tire with the rollers
while spinning the wheel to complete match-mounting
procedures.
• Smooth, powerful bead-loosening side shovel is air motor
driven, which eliminates the violent forces commonly associated with air cylinder operation when loads are applied and
immediately released. Side shovel bead loosener is standard
with the TC3250 and optional with the TC3500.
• TC3250’s bottom bead lifter device reloosens the lower bead
without tugging or pulling.
• Force Multiplier Arm aids the operator with added leverage
when seating the mounting head and holding it down against
the wheel. Force Multiplier is standard with the HUNTC3500,
HUNTC3500SS, HUNTC3250PLS and HUNTC3250HP
models and optional with the HUNTC3250 model.
Models:
HUNTC3500
HUNTC3500SS
HUNTC3250
HUNTC3250HP
HUNTC3250PLS
High performance tire changer
HUNTC3500 with beadloosening side shovel
Euro-style tire changer
HUNTC3250 with high
performance bead lever, mechanical bead
pusher and bead
depressor tail
HUNTC3250HP
with air-powered
bead pusher
Clamping system rotating speed: 15 r.p.m. (variable)
Recommended air supply: 145 ± 30 p.s.i.
Air consumption: 12 c.f.m. (approximately)
Maximum tire diameter: 40" (TC3250), with Extension Kit†:
43.5"
Wheel clamping wheel diameter range
— Internal clamping: 10 – 22" (TC3250), with extension kit†:
10 – 26"
— External clamping: 9 – 20" (TC3250), with extension kit†:
9 – 26"
Hydraulic bead-loosening roller system (TC3500)
— Maximum bead roller opening width: 19"
— Diameter range: 13 – 24"
Bead-loosening side shovel††
— Maximum bead-loosening opening width: 17"
Approximate shipping weight: 560 lbs. (TC3500), 480 – 560
lbs. (TC3250)
•
•
•
•
Extension Kit standard with TC3500 models and optional with
TC3250 models.
††
Bead-Loosening Side Shovel standard with TC3250 models
and optional with TC3500.
†
NOTE: Wheel specifications are based on nominal wheel sizes.
Some dimensions, capacities and specifications may vary
depending on tire and wheel configurations.
Accessories:
HUN20-1644-1*
Extension Kit
HUNRP68832**
Force Multiplier Arm
HUNRP6-2413** Mechanical Bead Pusher
HUNRP6-2663** High Performance Bead Lever
HUNRP6-1572** Bead Depressor Tail
HUN20-1320-1
Plus Device Package (TC3250)
HUNRP6-3184
Tire-to-Wheel Matching Kit (TC3250)
HUNRP6-2310
Air-Powered Bead Roller (TC3250)
HUN2015061
Tire Maintenance Kit
HUNRP6-0343
Extra Polymer Mounting Head
*Standard with HUNTC3500 and HUNTC3500SS.
**Standard with HUNTC3500, HUNTC3500SS,
HUNTC3250HP and HUTC3250PLS.
Hunter has additional tire changers and
accessories available. Call your Approved
Dealer Equipment representative for more
information about models and pricing.
HUNTC3250PLS
HUNTC3500SS
TO ORDER FAX: 1.800.892.9651
5-12
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
TIRE CHANGERS
SUPPLIED BY: HUNTER ENGINEERING
The conventional swing-arm design of the TC3000 is familiar to
most technicians and includes advanced features that increase
speed and ease of use.
Features:
• Enhanced tower handles tires up to 44" in diameter.
• Strong twin-cylinder tabletop clamping system continues to
clamp evenly as the unit ages and wear tolerances increase.
• Bead-loosening side shovel contains a quick-exhausting air
valve circuit to speed the bead-loosening process.
• Bead-loosening functions are controlled by a foot-feathering
pedal for safety.
• Locations of the inflation pedal and gauge force the operator
out of the tire failure danger zone.
Models:
HUNTC3000
HUNTC3000S
• Pedal-activated tilt column automatically returns the column
and mounting head to the same position, saving time when
servicing same-size tires.
• Optional Plus Device saves time and effort and protects the
rim when servicing high performance tires.
• Strong twin-cylinder
tabletop clamping system
continues to clamp evenly
as the unit ages and wear
tolerances increase.
• Bead-loosening side
shovel contains a quickexhausting air valve circuit
to speed the bead-loosening process.
• Bead-loosening functions
are controlled by a footfeathering pedal for safety.
• Locations of the inflation
pedal and gauge force
the operator out of the tire
failure danger zone.
Clamping table rotating speed: 8 r.p.m. (bidirectional)
Recommended air supply: 145 ± 30 p.s.i.
Maximum tire diameter: 39" (HUNTC3100), 44" (HUNTC3000)
Maximum tire width: 15"
Bead loosening wheel width range: 1.7 – 15"
Wheel clamping wheel diameter range
— Internal clamping: 13 – 22"
— External clamping: 12 – 20"
• Motor: 1 hp, heavy-duty, low amp draw
• Approximate shipping weight: 665 lbs. (HUNTC3100PLS),
565 lbs. (HUNTC3100), 510 lbs. (HUNTC3000)
Models:
HUNTC3100
Accessories:
The TC3100’s automatic tilt-column design saves time, and
the optional add-on features enhance its capabilities to service
performance tires.
Features:
•
•
•
•
•
•
HUNTC3100S
HUNTC3100PLS
HUNTC3100SPL
Swing-arm tire changer with polymer
mounting head
HUNTC3000 with steel mounting head
Hunter TC3100 Tire Changer
Specifications:
HUNRP6-2663
HUNRP60326
HUNRP6-2413
HUNRP6-7290
HUNRP6-0343
HUN2015061
HUN2016821
High Performance Bead Lever
Extra Bead Lever Protector Sleeve
Mechanical Bead Pusher
Bead Depressor Tail
Extra Polymer Mounting Head
Tire Maintenance Kit
Plus Device Package (HUNTC3100)
NOTE: Wheel specifications are based on nominal wheel sizes.
Some dimensions, capacities and specifications may vary
depending on tire and wheel configurations.
Hunter has additional tire
changers and accessories
available. Call your Approved Dealer Equipment
representative for more
information about models
and pricing.
HUNTC3100PLS
HUNTC3000
TO ORDER CALL: 1.800.368.6787
Tilt-column tire changer with polymer
mounting head
HUNTC3100 with steel mounting head
HUNTC3100 with Plus Device Package
HUNTC3100S with Plus Device Package
5-13
TO ORDER FAX: 1.800.892.9651
5-13
Hunter TC3000 Tire Changer
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
TIRE CHANGERS
SUPPLIED BY: COATS
9024E Rim Clamp Tire Changer
Model No. AMM9024E
Features:
5065X Rim Clamp Tire Changers
This is the “workhorse” rim clamp in high
volume shops.
5-14
• Clamp wheels externally
up to 24" and internally up
to 26". Wheels keep getting
bigger and more expensive.
The AMM9024E allows you
to change tires on oversized wheels while providing
complete protection. You can
service the expanding market
for custom alloy wheels.
• Improved Bead Loosener
Action. Cam-operated bead
loosener ensures contact with
wider wheels at the proper angles.
AMM9024E
Minimizes risk of wheel damage.
• Power Devices That Do 90% of the Work. Power taper
rollers, pneumatic drop center, and swing-in rollers handle
approximately 90% of the effort required to change even the
toughest tires. Technicians can concentrate on efficiency.
• Complete Protection for Expensive, Delicate Wheels. The
AMM9024E provides protection for wheels at every step of
the process. Bead loosener socks, clamp booties, and lift
tool protection prevent metal-to-metal contact that causes
scratching or marring.
Option:
AMM8184563
Integrated Wheel Lift
7065X Rim Clamp Tire Changers
Low profile, run flats and performance tires.
Specifications:
• Tire diameter: 50" maximum o.d.
• Rim width: 3 – 14" maximum
• Rim diameter: Standard position: 10
– 17-1/2" clamped externally and 13
– 20" clamped internally. Extended
position: 14 – 21" clamped externally and
16 – 24" clamped internally
Models:
AMM7065AX
AMM7065EX
Accessory:
AMM8184327
Specifications:
• Tire diameter: 50" maximum o.d.
• Rim width: 14" maximum
• Rim diameter: 6 – 22" clamped
externally and 8 – 26" clamped internally with standard clamps
Models:
AMM5065EX
AMM5065AX
Rim clamp tire
AMM5065X
changer
Rim clamp tire changer with all-air-drive
system
Accessories:
AMM108028
Adjustable tire spreader (used with
AMM181329 base)
AMM181329
Rim clamp spreader adaptor
AMM84356851 Drop center tool
AMM8184327 24" clamps (for use with COATS® models
AMM5065AX, AMM5065EX, AMM7065AX
and AMM7065EX)
5030 Rim Clamp Tire Changers
An affordable alternative that enables your full-service shop to
change most tire and wheel combinations — especially performance and alloy rims that require precision service.
Specifications:
• Tire diameter: 40" maximum o.d.
• Rim width: 10-1/2" maximum
• Rim diameter: 10 – 17-1/2" clamped externally and
13 – 20" clamped internally with standard clamps
Models:
AMM5030E
AMM5030A
Accessories:
AMM108028
AMM181329
AMM181554
Electric
Air
Adjustable tire spreader (used with
AMM181329 base)
Rim clamp spreader adaptor
Storage tray
Air
Electric
24" clamps (for use with
AMM7065EX
COATS® models
AMM5065AX, AMM5065EX,
AMM7065AX and AMM7065EX)
AMM8184327
TO ORDER FAX: 1.800.892.9651
5-14
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
TIRE CHANGERS
SUPPLIED BY: ACCU INDUSTRIES, INC.
Tire Changer
Model No. ACC3602HP
Features:
• Standard pneumatic mounting helper provides exceptional
ease and safety in changing low profile and run flat tire
designs. Pneumatically depresses the bead as well as pneumatically holds the bead in the drop center during the remount
cycle. Eliminates all need for bead holding clamps. (Optional
Model ACC5602 available without mounting helper.)
• Pneumatic tilt tower design provides superior rigidity for years
of trouble-free operation.
• Numerous manufacturer’s upgrades provide the most rigidity
and strength for the toughest environments.
• Inflation jets integrated in the clamping jaws guarantee quick
and safe inflation.
• Rim protector inserts located in mount/demount head and rim
clamps eliminate accidental damage to alloy rims.
• Handles tires to 40" diameter and rims to 15" width, outside rim
clamping ability to 24" diameter.
• Twin clamping cylinders provide more power to hold the most
difficult rims.
Features:
• Handles tires to 40" diameter and rims to 13" width.
• Inflation jets are integrated in the clamping jaws.
• Twin clamping cylinders provide more power to hold the most
difficult rims.
• Double-acting bead breaker air cylinder eliminates shock.
• Plastic rim protector inserts, located in mount/demount, head
and rim clamps eliminate accidental damage to alloy rims.
• Standard water separator and air oiler ensure long service
life.
• Optional pneumatic mounting helper (standard on the
ACC3602HP) provides exceptional ease and safety in changing low profile and run flat tire designs.
5-15
Tire Changer
Model No. ACC5602HP
Tire Changer
Model No. ACC4602
Features:
•
•
•
•
•
•
•
•
Handles tires to 50" diameter and rims to 16" width.
Two-position bead breaker accommodates extra wide tires.
Inflation jets integrated in the clamping jaws.
Rim protector inserts located in mount/demount head and rim
clamps eliminate accidental damage to alloy rims.
Bead seating tank is integrated into the tower for space-saving
installations.
Twin clamping cylinders provide more power to hold the most
difficult rims.
Double-acting bead breaker air cylinder eliminates shock.
Standard water separator and air oiler ensure long service life.
ACC5602HP
ACC4602
ACC3602HP
Models and Specifications:
Model No.
ACC3402
ACC3402HP
ACC3602
ACC3602HP
ACC4602
ACC5602
ACC5602HP
Pneumatic mounting helper
Optional
Standard
Optional
Standard
N/A
Optional
Standard
Arm design
Swing
Swing
Swing
Swing
Swing
Pneumatic Tilt
Pneumatic Tilt
Outside clamping max.
18"
18"
21"
21"
21"
24"
24"
Inside clamping max.
20"
20"
24"
24"
24"
28"
28"
Tire diameter max.
40"
40"
40"
40"
50"
40"
40"
Rim diameter max.
13"
13"
15"
15"
16"
15"
15"
110 – 170 p.s.i.
110 – 170 p.s.i.
110 – 170 p.s.i.
110 – 170 p.s.i.
110 – 170 p.s.i.
110 – 170 p.s.i.
110 – 170 p.s.i.
Air required
Power required
Dimensions
Shipping weight
120 volt AC,
120 volt AC,
120 volt AC,
120 volt AC,
120 volt AC,
120 volt AC,
120 volt AC,
20 amp, 60 Hz
20 amp, 60 Hz
20 amp, 60 Hz
20 amp, 60 Hz
20 amp, 60 Hz
20 amp, 60 Hz
20 amp, 60 Hz
32" x 48" x 69"
32" x 48" x 69"
30" x 50" x 75"
30" x 50" x 75"
41" x 45" x 87"
43" x 52" x 75"
43" x 52" x 75"
457 lbs.
457 lbs.
509 lbs.
509 lbs.
552 lbs.
710 lbs.
710 lbs.
TO ORDER CALL: 1.800.368.6787
5-15
TO ORDER FAX: 1.800.892.9651
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
TIRE CHANGER
SUPPLIED BY: MCCOURT
Corghi AM26 Artiglio Master
Model No. MCDARTMASTER
No more struggling with difficult tires. Just program the wheel
size into the computer and this amazing tire changer will finish
the job quickly, efficiently and safely.
5-16
Artiglio Master marks a new frontier in the world of tire changers because it eliminates the lever, physical effort and the precaution and worry about damaging expensive wheels and tires.
The unit’s operation is based on a completely new principal,
including electronic wheel diameter selection and automatic
tool positioning, wheel lifter for reloading and unloading the
wheel and automatic tool head for leverless mounting/
demounting.
Features:
•
•
•
•
•
•
•
•
•
Automatic mount/demount.
Computerized system.
Push-button technology.
No pry bars or tire tools.
No damage to wheels.
No damage to tires.
No heavy lifting.
Pneumatic wheel lift.
Affordable price.
Artiglio MASTER
Saves Money! Since
no metal ever touches
the wheels, damage is
totally eliminated.
Specifications:
•
•
•
•
•
•
•
Rim diameter: 12 – 26"
Rim width: 15"
Tire diameter: 40"
Voltage: 110 volt, 1 phase
Amp draw: 10 amps
Air pressure: 150 p.s.i.
Weight: 990 lbs.
Options:
MCD100009A
MCD263408A
MCD263419A
Single hole wire wheel plate.
Articulating arm.
Reverse wheel adaptor.
Saves Time! Simply enter the wheel size
into the computerized control panel,
push a button and automation begins.
TO ORDER FAX: 1.800.892.9651
5-16
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
Benefits of Leasing:
• Provides up to 100%
financing!
• Conserves working capital!
• Simple documentation!
• Flexible payment plans!
TIRE REPAIR CENTER
SUPPLIED BY: JS PRODUCTS
TireJim, Complete Tire Repair Center
Model No. JSP4000
Features:
•
•
•
•
•
•
•
•
•
Terms:
• $2,000 – $100,000+
• Up to 60 months!
This repair center frees up your tire installation equipment.
Keeps all your repair supplies and tools readily available.
Made out of heavy-duty steel construction.
Center comes complete with stand, tire spreader, chemical
tray, tool tray, patch and plug storage tray and (2) separate
storage trays for patches.
Durable red powder coated finish.
Allows your employee to perform a professional, safe tire
repair and reduces inventory loss.
Reduces time to repair tire.
Helps with inventory control.
Tire repair supplies, repair training and instructions are also
available.
Requirements:
• For equipment items.
• Business entity only.
• $1.00 end of lease
purchase.
• Proof of insurance needed
over $2,500.
• Financial statements
required for transactions
over $50,000.
• First and last payment required at lease inception.
Rates:
• Extremely competitive
rates and terms.
• Just call 1-800-368-6787
for a quote!
TO ORDER CALL: 1.800.368.6787
JSP4000 (Tools sold separately.)
5-17
TO ORDER FAX: 1.800.892.9651
5-17
LEASE WITH
THE LEADER!
WHEEL AND TIRE SERVICE EQUIPMENT
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
WHEEL BALANCER
BFH1000 Balancer
Model No. EEWB519A
SUPPLIED BY: JOHN BEAN COMPANY
Options:
Features:
5-18
• Hands-free, power clamping of the wheel to the balancer
with auto-mount check.
• Fully automatic all-parameter data entry.
• Fully automatic rim identification and optimal mode selection.
• Pinpoint laser beam indicator for more accurate weight
placements.
• Fully automatic, single-spin rim and tire run-out
measurements with graphic printouts.
• Patented Virtual Plane Imaging wheel balancing technology.
• Flat screen, color monitor with easy-to-follow directions …
multilingual.
• Fastest floor-to-floor operation times.
EAK0221J27A
EAK0221J26A
EAS2081J30A
EAK0221J22A
EAK0221J28A
JBC8113330GP
NEW
FOR
06
Wheel Lift.
Printer Kit.
Flange Plate Cart.
Flange Plate kit.
Flange Plate Kit with Cart.
Balancer Chuck 40 mm.
Benefits of the Balance Force Harmonics System:
Automatically detects non-balance, force harmonic related
problems associated with:
• Tire and rim run-out (out of round issues).
• Non-precise placements of balancing weights.
• Wheel-to-balancer mounting errors.
• Operator data entry errors.
• Improper selection of optimal balancing modes.
LASER DEVICE ONE is integrated
in the balancer mainframe and
measures:
• Inner rim shape to help determine
the correct weight position on the
left side or inside the rim.
• Distance and diameter of the rim.
• Radial and lateral rim runout on the
left side of the rim.
• Number and location of spokes.
TO ORDER FAX: 1.800.892.9651
EEWB519A
LASER DEVICE TWO is located in
the rear measurement unit underneath the wheel guard and
measures:
• Outer tire radial runout.
• Bead seat runout measurement of
the rim, when the measurement
run is performed prior to mounting
a tire.
5-18
LASER DEVICE THREE is integrated into the right side of the
wheel guard frame assembly and
measures:
• Radial and lateral rim runout on the
right side of the rim.
• Width of the rim.
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
WHEEL BALANCERS
Multi-Featured Standard Wheel Balancer VPI™
System I, II and III
Virtual Plane Imaging (VPI) — unique software programming
projects a virtual plane out on the end of the balancer shaft to
allow imbalance vibrations to be measured on both sides of the
wheel for improved accuracy and repeatability.
Features:
• Semiautomatic data entry in all (System I: 1 parameter,
System II: 2 parameters, System III: 3 parameters).
• Virtual Plane Imaging for greater accuracy and
repeatability.
• Automatically stops at correct weight positions on System III,
Tone-at-Top on Systems I and II.
• ALUs weight placement arm with 2-plane auto-memory lock
for precise tape weight placements.
• Pedal activated spindle lock for more accurate weight
placements.
• Hidden weights behind spokes capability.
• Divided weights, standard or tape capabilities.
• Built-in wheel and tire diagnostics.
• Deep-capacity weight storage pockets (System I: 14,
System II: 17, System III: 31).
• Fast, 6 second cycle time for average 16" wheel.
• (3) window LED displays.
• Raised, ergonomically 3-way adjustable display/controls.
• Safety hood with auto start feature (optional hood on
System I).
• Match balancing and wheel optimization modes.
• Quick nut with speed knobs.
• Fast, easy operator calibration.
• Built-in memory for multiple operators (4).
• Built-in electronic counters for monitoring use and
productivity.
• Built-in cone storage in the molded top.
• Extra accessory storage pegs on the side.
• No-bolt-down installation.
• 220 volt, 50/60 Hz power (115 volt operation on System I).
Includes:
•
•
•
•
•
•
Quick clamp speed nut.
Captured back spring.
(4) hardened centering cones.
Weight hammer/pliers.
Rim width calipers.
Wheel safety hood.
Models and Specifications:
Model No.
Maximum tire diameter
Maximum rim width
Maximum rim diameter capacity
Maximum wheel weight
Shaft diameter
Balance shaft speed
Balancing modes
Angular accuracy
Imbalance accuracy
Cycle time
Number of weight pockets
Motor
Space requirement
Electrical requirement
Shipping weight
EEWB504A (System I)
44"
3 – 20"
8 – 26 "
120 lbs.
40 mm
100 r.p.m.
5 ALU, 1 static, 1 dynamic
0.7 °
2 grams (.070 oz.)
As low as 6 seconds*
14
1 hp (acceleration hp)
36" x 32"
115 volt/1 phase/60 Hz
315 lbs.
EEWB503A (System
44"
3 – 20"
8 – 26"
133 lbs.
40 mm
100 r.p.m.
5 ALU, 1 static, 1 dynamic
0.7 °
2 grams (.070 oz.)
As low as 6 seconds*
17
1 hp (acceleration hp)
42" x 46"
220 volt/1 phase/60 Hz
335 lbs.
EEWB502A (System III)
44"
3 – 20"
8 – 26"
154 lbs.
40 mm
200 r.p.m.
5 ALU-S, 1 static, 1 dynamic
0.7 °
1 gram (.035 oz.)
6 seconds (average 16" wheel)
31
1 hp (acceleration hp)
60" x 49"
220 volt/1 phase/50 – 60 Hz
380 lbs.
*13" standard tire
EEWB503A
EEWB504A
TO ORDER CALL: 1.800.368.6787
5-19
EEWB502A
TO ORDER FAX: 1.800.892.9651
5-19
SUPPLIED BY: JOHN BEAN COMPANY
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
VIBRATION CONTROL SYSTEM
SUPPLIED BY: HUNTER ENGINEERING
Hunter GSP9700 Road Force
Measurement® System
Hunter’s GSP9700 extends beyond the traditional functions of
a wheel balancer by performing a simulated road test on the
wheel to identify vibration and tire-related pull problems.
Features:
5-20
• Exclusive Road Force Measurement® system quickly identifies and diagnoses tire/rim-related vibration problems and
provides easy-to-follow instructions on how to solve them.
• Fastest cycle time and easiest operation of any balancer on
the market.
Balance wheels,
• ForceMatching® procedure finds the high or stiff area on a
address radial force
tire and the low spot on a rim to be marked and matched to
and run-out related
cancel vibration caused by radial force variation.
vibration and correct
• Optional, integrated wheel lift allows a single technician to
tire pull with a single
easily mount wheels weighing up to 175 lbs., which helps
investment.
prevent potential injuries and fatigue from manually lifting
wheels into place.
• Automatic double Dataset® arms speed entry of exact chosen
HUNGSP97LW7P
weight location and double as measuring tools for lateral and
Models:
radial run-out.
HUNGSP97127
Road Force Measurement System with
• Split Spoke® mode automatically locates the best out-of-sight
17" monitor
position for adhesive weight placement on custom wheels.
HUNGSP9712L7
HUNGSP97127 with StraightTrak LFM
®
• Split Weight mode offers multiple weight choices to help
feature
reduce large weight inventories and avoid trim ring
HUNGSP97127P
HUNGSP97127 with printer kit
obstructions.
HUNGSP9712W7 HUNGSP97127 with integrated wheel lift
• Printer kit option can be used to show the vehicle owner the
HUNGSP971L7P
HUNGSP97127 with StraightTrak and
results of vibration and tire-pull tests.
printer kit
HUNGSP971LW7 HUNGSP97127 with StraightTrak and
Specifications:
wheel lift
• Electrical: 230 volt, 20 amp, 50/60 Hz, 1 phase,
HUNGSP971W7P
HUNGSP97127
with wheel lift and printer
NEMA L6-20R
kit
• Air supply: 100 – 175 p.s.i.
HUNGSP97LW7P HUNGSP97127 with StraightTrak, wheel
• Roller force: Up to 1,400 lbs.
lift and printer kit
• Rim diameter: 10 – 30"
•
•
•
•
•
•
•
•
•
Maximum tire diameter: 40"
Maximum tire width: 20"
Maximum tire/wheel assembly weight: 175 lbs.
Radial and lateral run-out accuracy: .002"
Radial force measurement accuracy: 2 lbs.
Placement accuracy: 512 positions (± 0.35°)
Balancing speed: Variable r.p.m.
Motor: Programmable DC drive system
Approximate shipping weight: 675 lbs.
NOTE: Some dimensions, capacities and specifications may
vary depending on tire and wheel configuration.
NOTE: Wheel adaptors sold separately.
TO ORDER FAX: 1.800.892.9651
StraightTrak LFM Feature Option:
HUN2017101
Field installed StraightTrak LFM feature
(for most units shipped after 12/01)
Eliminates Tire-Related Pull Problems!
The optional StraightTrak® LFM (Lateral Force
Measurement) feature assesses the lateral
forces in tires that cause pulls and drifts and
provides corrective measures to minimize,
offset or eliminate these problems.
Hunter has additional wheel balancers and accessories available. Contact your local Hunter sales representative for information about models and pricing.
5-20
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
WHEEL BALANCERS
SUPPLIED BY: HUNTER ENGINEERING
Hunter DSP9600 Wheel Balancer
Hunter DSP7700 Wheel Balancer
Features:
Features:
Hunter’s DSP7700 is a rugged, compact balancer that is perfect for the quality conscious, yet economically oriented shop
with a lower volume of service.
• ServoDrive programmable direct current drive system uses
a durable motor that can rotate the wheel in either direction
at variable speed and torque, giving the technician complete
control.
• Split Spoke® mode automatically locates the best out-of-sight
position for adhesive weight placement on custom wheels.
• Split Weight® mode offers multiple weight choices to help
reduce large weight inventories and avoid trim ring
obstructions.
• CenteringCheck™ feature ensures a mounted wheel is properly centered to produce a more accurate balance.
• Quick-Thread® auto-clamping takes up unused spindle
threads with a double tap of the foot pedal.
• Optional automatic Dataset® arms speed entry of exact chosen weight location and double as measuring tools for lateral
and radial run-out.
• Optional, integrated wheel lift allows a single technician to
easily mount wheels weighing up to 175 lbs., which helps
prevent potential injuries and fatigue from manually lifting
wheels into place.
Models:
HUNDSP9612D
HUNDSP9612DD
HUNDSP9612DW
HUNDSP961DDW
High-capacity DSP balancer with inside
Dataset arm
High-capacity DSP balancer with double
Dataset arms
HUNDSP9612D with integrated wheel lift
HUNDSP9612DD with integrated
wheel lift
• The 360° weight position display shows weight “shadow”
when a position is hidden on the bottom half of the wheel.
• Enclosed nonventilated drive generates less heat during
heavy use.
• Stable design and heavy-duty components allow the balancer to spin wheels up to 150 lbs. repeatedly without
overheating.
• Optional automatic inside Dataset arm instantly measures
distance and diameter for clip-on weights and distance,
diameter and width for both weight planes when using tape
weights.
• Quick Calibration Check confirms if calibration is needed at
any time in just a few seconds.
Models:
HUNDSP7701
HUNDSP7701D
Compact DSP balancer
HUNDSP7701 with automatic inside
Dataset arm
Specifications:
• Electrical:
230 volt, 20 amp, 50/60 Hz, 1 phase,
NEMA L6-20P (DSP9600)
110 volt/230 volt, 15 amp, 50/60 Hz, 1 phase,
NEMA 5-15P (DSP7700)
• Rim diameter: 10 – 30"
• Maximum tire diameter: 44"
• Maximum tire width: 20"
• Maximum tire/wheel assembly weight: 175 lbs. (DSP9600),
150 lbs. (DSP7700)
• Placement accuracy: 512 positions (± 0.7°)
• Balancing speed: Variable r.p.m. (DSP9600)
150 r.p.m. (DSP7700)
• Motor: Programmable DC drive system
• Approximate shipping weight: 575 lbs. (DSP9600),
622 lbs. (DSP9600 with lift), 250 lbs. (DSP7700)
NOTE: Some dimensions, capacities and specifications may
vary depending on tire and wheel configuration.
NOTE: Wheel adaptors sold separately.
Hunter has additional wheel balancers and accessories available. Call your Approved Dealer Equipment representative for
more information about models and pricing.
HUNDSP961DDW
HUNDSP7701D
TO ORDER CALL: 1.800.368.6787
5-21
TO ORDER FAX: 1.800.892.9651
5-21
Hunter’s DSP9600 uses the patented ServoDrive™ system
that combines a wide range of accuracy and speed features,
working together to take wheel balancing to a new level.
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
WHEEL BALANCERS
SUPPLIED BY: COATS
COATS® XR 1800 Wheel Balancer
Ride Management System
Model No. AMMXR1800
NEW
FOR
06
COATS® XR 1850 Total Ride Management System
with Radial and Lateral Run-Out Diagnostics
Model No. AMMXR1850
Features:
5-22
• Radial run-out measurement and tire/rim optimization procedure diagnose and correct non-imbalance related vibration
problems.
• 3-D auto data entry, direct TAW location and easy behindthe-spoke weight placement facilitate efficient balancing of
today’s wide variety of aftermarket wheel designs.
• Real-time 3-D animated graphics, visual cues and contextsensitive help screens deliver ease of use and promote
proper balancing techniques.
• Highly accurate sonar system eliminates the need for an
outer arm, increasing user productivity and reducing the
number of “wear” components.
• Run-out Measurement System adds just 2 – 3 seconds to
the balancing cycle time, making it economical to check
EVERY tire/wheel assembly. Radically reduces time spent on
comebacks!
The COATS XR 1850 Ride Management System — everything
the XR 1800 offers — now with radial and lateral run-out
diagnostics.
Features:
• Printer provides customers with a professional printout showing the benefits of your service.
• CD-ROM with XR 1800 video overview, plus information on
all COATS balancers and key accessories.
• Complete collection of “no charge” printable merchandising
materials posters, counter cards and consumer literature
which can be used to promote premium balances and increase revenues.
Adaptor Kits:
One of the following kits must be ordered with XR Series
balancers.
AMM113428
Basic passenger car kit.
AMM113593
Extended passenger car kit.
AMM113594
Premium passenger car and light truck kit.
AMMXR1850
Accessories:
AMM8113391
AMM8113091
AMM8113276C
Balancer mate
Image pin plates
Light truck front cone kit, 28 mm i.d.,
double-sided cone and metal backing plate.
Range 4.80 – 6.80"
AMM8113277C
Light truck front cone kit, 40 mm i.d., double
sided cone and metal backing plate. Range
4.80 – 6.80"
AMM8113375
28 mm Toyota 4-Runner, 6 x 5-1/2"
studplate adaptor, 1.125" i.d.
AMM8113374
40 mm Toyota 4-Runner, 6 x 5-1/2"
studplate adaptor, 1.125" i.d.
AMM8KPPBM28 28 mm pin plates kit, (4) plates and
balancer mate
AMM8KPPBM40 40 mm pin plates kit, (4) plates and
balancer mate
AMM8KFFPBM28 28 mm fixed finger plates kit, 1 – 5 plates
and balancer mate
AMM8KFFPBM40 40 mm fixed finger plates kit, 1 – 5 plates
and balancer mate
AMM520
Wheel lift
AMM113592
Wheel lift link plate
AMM520XRLINK Wheel lift with XR compatible link plate
TO ORDER FAX: 1.800.892.9651
5-22
AMM520
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
WHEEL BALANCERS
SUPPLIED BY: COATS
Accessories:
NEW
FOR
06
AMM8113391
AMM8113091
AMM8113276C
Simple, interactive user interface, real time 3-D
animated graphics and visual cues promote proper balancing techniques and faster floor-to-floor times.
Static on Screen™, a simultaneous
display of static and dynamic data,
identifies any excess residual static
imbalance and includes the XR
Series Onboard Inflation System.
Features:
• Choice of 2- or 3-parameter automatic data entry for speed and
efficiency.
• Direct Tape-A-Weight location and
best-in-class behind-the- spoke
modes make balancing today’s
AMMXR17503DI
more complex wheel designs fast and
easy. In fact, the XR 1750 can do most
Tape-A-Weight balances in just (1) spin.
• Every step of technician activity has been carefully planned
for speed and accuracy. The XR 1750 has a slide nut for
faster mounting, automatic hood start, video and sound indications of when the weight is properly positioned and even a
complete onboard training mode.
Accessory:
AMM1136871
Special applications light truck
cone, 40mm (Tacoma cone)
Wheel Balancer
Model No. AMM1055-1
• Efficient, 5 second cycle time.
• One-piece pressure cup mounting assembly — (10) turns to
tighten.
• (8) balancing modes: dynamic, static, RV, match mount and
(4) alloy balancing modes.
• Three-dimension adjustability of instrument panel for easy
ergonomic use.
• Ounce/gram selectable.
• Additional adaptor and wheel
weight storage shelves.
Helps your shop obtain tremendous earning potential available
in high volume, premium wheel balancing without sacrificing
reliability or profit. Equipped with the latest state-of-the-art
technologies, AMM850 offers many convenient, timesaving
features.
• Exclusive COATS® Direct
Drive motor for accuracy and
durability.
• Multiple modes, including
settings for alloy wheels.
• Self-calibrating.
Accessories:
AMM309060
AMM8113277
AMM110467
AMM8308095
Also Available:
Specifications:
•
•
•
•
•
•
Wheel Balancer
Model No. AMM850-1
Features:
AMM1136871
Features:
Balancer mate
Image pin plates
Light truck front cone kit, 28 mm i.d.,
double-sided cone and metal backing plate.
Range 4.80 – 6.80"
AMM8113277C
Light truck front cone kit, 40 mm i.d.,
double-sided cone and metal backing plate.
Range 4.80 – 6.80"
AMM8113375
28 mm Toyota 4-Runner, 6 x 5-1/2"
studplate adaptor, 1.125" i.d.
AMM8113374
40 mm Toyota 4-Runner, 6 x 5-1/2"
studplate adaptor, 1.125" i.d.
AMM8KPPBM28 28 mm pin plates kit, (4) plates and
balancer mate
AMM8KPPBM40 40 mm pin plates kit, (4) plates and
balancer mate
AMM8KFFPBM28 28 mm fixed finger plates kit, 1 – 5 plates
and balancer mate
AMM8KFFPBM40 40 mm fixed finger plates kit, 1 – 5 plates
and balancer mate
AMM700
Tire diameter: Up to 40"
Rim width: 2 – 19.9"
Rim diameter: 8 – 29.9"
Maximum tire weight: 150 lbs.
Motor: 1-1/2 hp
Power requirement: 220 volts
AMM850-1
Combi adaptor kit
(for 3, 4, 5, 6, 8 and 10 lug mounting)
Truck cone kit for light trucks up to 1 ton (3.38
– 5.88")
Trucks over 1 ton
Tacoma alloy wheel adaptor
Wheel balancer
AMM1055-1
TO ORDER CALL: 1.800.368.6787
5-23
TO ORDER FAX: 1.800.892.9651
5-23
COATS XR 1750-3Di Wheel Balancer
Model No. AMMXR17503DI
®
WHEEL AND TIRE SERVICE EQUIPMENT
2006/2007 SECTION 5
WHEEL BALANCERS
NEW
FOR
SUPPLIED BY: ACCU INDUSTRIES, INC.
Computerized Wheel Balancers
Model No. ACC1220
Maximum features coupled with minimum space make a workhorse of a balancer.
Features:
5-24
• (5) balancing modes including tire matching program and
PAX tire mode.
• (2) brake systems: automatic brake after measuring run and
foot-activated spindle lock guarantee accurate weight
placement.
• Ergonomically angled weight tray features (12) weight
pockets.
• (4) side accessory hooks.
• Simple, fast data entry through up/down arrow buttons.
• Variable speed measurement software reduces cycle time.
• Operator calibration.
Computerized Wheel Balancers
Model No. ACC1420
Speed, accuracy, versatility all combined in an industry leading
premium computer balancer.
Features:
• (2) parameter auto entry.
• Accu-stick weight application mode holds the weight and applies weight to wheel.
• Hidden spoke program recalculates weight amounts to hide
the weights behind the spokes for a premium balance.
06
• (5) balancing modes including tire matching program and
PAX tire mode.
• (3) brake systems: automatic brake after measuring run, footactivated spindle lock plus correction location brake pulse for
both planes.
• (16) weight pockets with on-balancer molded cone storage.
• (6) operator recalls plus operator calibration.
Computerized Wheel Balancers
Model No. ACC1520
The fastest, most versatile balancer offered. Designed for the
high volume, maximum production shops.
Features:
• (3) parameter auto entry.
• Raised display for durability and easy viewing. 220 volt HD
power supply.
• Accu-stick weight application mode holds and applies weight
to the wheel.
• Hidden spoke program recalculates weight amounts to hide
the weights behind the spokes for a premium balance.
• (5) balancing modes including tire matching and PAX tire
mode.
• (3) brake systems: automatic brake after measuring run, footactivated spindle lock plus correction location brake pulse for
both planes.
• Increased (25) weight pocket storage with on-balancer
molded cone storage.
• (8) operator recalls plus operator calibration.
Specifications:
Model No.
Parameter entry
Weight storage pockets
ACC1220
ACC1420
ACC1520
Manual (± keys)
2 auto entry
3 auto entry
12
16
25
Yes — 2
Yes — 6
Yes — 8
Distance arm
holds weight (Accu-stick)
No
Yes
Yes
Hidden spoke program
No
Yes
Yes
Weight position pulse brake
No
Yes
Yes
Stop-at-top outside plane
No
Yes
Yes
Multiple operator
Cycle time – 30 lb. assembly
5 seconds
5 seconds
5 seconds
1 gram (.035 oz.)
1 gram (.035 oz.)
1 gram (.035 oz.)
Rim width capacity
1 – 20"
1 – 20"
1 – 20"
Rim diameter capacity
8 – 30"
8 – 30"
8 – 30"
20.9" (530 mm)
20.9" (530 mm)
20.9" (530 mm)
44" (117 mm)
44" (117 mm)
44" (117 mm)
154 lbs. (70 kg)
154 lbs. (70 kg)
154 lbs. (70 kg)
110 volts AC
110 volts AC
220 volts AC
293 lbs.
310 lbs.
326 lbs.
Accuracy
Tire width capacity
Tire diameter capacity
Shaft capacity — maximum
Electrical
Shipping weight
TO ORDER FAX: 1.800.892.9651
5-24
ACC1220
ACC1520
ACC1420
TO ORDER CALL: 1.800.368.6787
2006/2007 SECTION 5
WHEEL AND TIRE SERVICE EQUIPMENT
INSPECTION LANE
NEW
FOR
SUPPLIED BY: HUNTER ENGINEERING
06
Hunter Inspection Lane
Hunter’s inspection lane equipment performs a computerized
undercar safety inspection in 3 minutes.
• Identifies hidden service opportunities that would have otherwise been missed.
• Performs a complete undercar safety inspection quickly and
easily without lifting the vehicle or removing the wheels.
• Measures vehicle components as they perform on the road.
• Provides a custom printout to explain needed service to the
vehicle owner.
Brake Tester — 30 seconds
The Brake Tester measures brake
force, deceleration, brake performance balance and efficiency,
vehicle weight and parking brake
operation. It also takes into account
the weight shift from rear to front
and side to side that occurs when
braking on the road.
Suspension Analyzer —
2 minutes
The Suspension Analyzer tests
each corner of a vehicle’s suspension for both tire-to-road adhesion
and dampening – the ability to
isolate road irregularities.
Includes:
Standard Accessories with WinSI Vehicle Inspection Console
• WinSI software
• Multimedia PC
• DVD drive
• HP color printer
• Mouse
• Wireless remote
• Keyboard
• 12-month access to ALLDATA Undercar information
Premium Console Also Includes:
•
•
•
•
•
Extra PC memory
Sound card
Network card
Cabinet with four drawers
One-year subscription to UnderCarInfo.net
Inspection Lane Configurations:
HUNB41402GLV
HUNB41403GLV
HUNB41404GLV
HUNB41405GLV
HUNB41406GLV
Sideslip Meter — 30 seconds
The Sideslip Meter indicates the
presence of incorrect wheel
alignment.
Models:
WinSI Vehicle Inspection Consoles
HUNR611PM19S
Premium cabinet with 19" LCD flat
screen display
HUNR611M19SI
Standard cabinet with 19" UVGA color
monitor
HUNS611M17SI
Compact cabinet with 17" UVGA color
monitor
TO ORDER CALL: 1.800.368.6787
HUNB41407GLV
HUNB41408GLV
HUNB41409GLV
HUNB41410GLV
HUNSA41401
HUNSA41402
(4) brake plates, (2) rear weight scales,
front suspension analyzer and front sideslip
meter
(4) brake plates and (2) rear weight scales
(4) brake plates, (2) rear weight scales,
front suspension analyzer and middle sideslip meter
(4) brake plates and front suspension
analyzer
(4) brake plates, (2) rear weight scales and
middle sideslip meter
(4) brake plates, (2) front weight scales and
front sideslip meter
(4) brake plates and two front weight scales
(4) brake plates and (4) weight scales
(4) brake plates, (2) rear weight scales and
middle suspension analyzer
Suspension analyzer
Suspension analyzer and front sideslip
meter
Call your Approved Dealer Equipment representative for more
information about models and pricing.
5-25
TO ORDER FAX: 1.800.892.9651
5-25
Features: